[U-Boot] [PULL] u-boot-pxa.git/master

[Marek Vasut]

Dear Tom Rini,

> On Mon, May 06, 2013 at 03:11:44AM +0200, Marek Vasut wrote:
> > The following changes since commit 5ed6f447af60aabd2669d913f673793c1ce48f47:
> >   P1022DS: Set CONFIG_SPL_MAX_SIZE directly (2013-05-03 09:19:43 -0400)
> > 
> > are available in the git repository at:
> >   git://git.denx.de/u-boot-pxa.git master
> > 
> > for you to fetch changes up to 66a62ce0dc48d2319938c72f34a562f519c5d5c2:
> >   h2200: Add board reset support (2013-05-05 23:47:05 +0200)
> > 
> > ----------------------------------------------------------------
> > 
> > Mike Dunn (5):
> >       lib: import bitrev library from the linux kernel
> >       pxa_lcd: add the ACX544AKN lcd device
> >       pxa_lcd: make lcd_enable() a weak pointer
> >       pxa27x_udc: remove call to unimplemented set_GPIO_mode()
> >       mtd: nand: add driver for diskonchip g4 nand flash
> > 
> > ??ukasz Da??ek (2):
> >       pxa: Add weak attribute to reset_cpu() function
> >       h2200: Add board reset support
> >  
> >  arch/arm/cpu/pxa/pxa2xx.c                |    2 +-
> >  arch/arm/include/asm/arch-pxa/hardware.h |   11 --
> >  board/h2200/h2200.c                      |    9 ++
> >  drivers/mtd/nand/Makefile                |    2 +
> >  drivers/mtd/nand/docg4.c                 | 1028
> > 
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > 
> >  drivers/mtd/nand/docg4_spl.c             |  222
> >  ++++++++++++++++++++++++++++ drivers/usb/gadget/pxa27x_udc.c          |
> >     4 +-
> >  drivers/video/pxa_lcd.c                  |   34 ++++-
> >  include/linux/bitrev.h                   |   23 +++
> >  include/linux/mtd/docg4.h                |  134 +++++++++++++++++
> >  lib/Makefile                             |    1 +
> >  lib/bitrev.c                             |   59 ++++++++
> >  12 files changed, 1515 insertions(+), 14 deletions(-)
> >  create mode 100644 drivers/mtd/nand/docg4.c
> >  create mode 100644 drivers/mtd/nand/docg4_spl.c
> >  create mode 100644 include/linux/bitrev.h
> >  create mode 100644 include/linux/mtd/docg4.h
> >  create mode 100644 lib/bitrev.c
> 
> Ahem, this is for Albert :)

Yes it is, my bad.

Best regards,
Marek Vasut