[U-Boot] [PATCH 3/3] mx23_olinuxino: Do not set voltage selection bit for SSP pads
Fabio Estevam
festevam at gmail.com
Mon May 6 03:52:56 CEST 2013
From: Fabio Estevam <fabio.estevam at freescale.com>
mx23 SSP pad registers do not contain voltage selection bit, so just remove it.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
board/olimex/mx23_olinuxino/spl_boot.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c
index 3755f29..6ba8c86 100644
--- a/board/olimex/mx23_olinuxino/spl_boot.c
+++ b/board/olimex/mx23_olinuxino/spl_boot.c
@@ -30,7 +30,7 @@
#include <asm/arch/sys_proto.h>
#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_SSP (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP (MXS_PAD_8MA | MXS_PAD_PULLUP)
const iomux_cfg_t iomux_setup[] = {
/* DUART */
--
1.7.9.5
More information about the U-Boot
mailing list