[U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support

Jagan Teki jagannadh.teki at gmail.com
Thu May 23 12:44:05 CEST 2013


On Thu, May 23, 2013 at 3:24 PM, Kuo-Jung Su <dantesu at gmail.com> wrote:
> 2013/5/23 Jagan Teki <jagannadh.teki at gmail.com>:
>> Hi,
>>
>> On Wed, May 22, 2013 at 6:31 AM, Kuo-Jung Su <dantesu at gmail.com> wrote:
>>> 2013/5/22 Jagan Teki <jagannadh.teki at gmail.com>:
>>>> Hi,
>>>>
>>>> I have a simple question like these parts are legacy flashes i guess.
>>>> Could you please tell me on which boards these were used?
>>>>
>>>
>>> It's used on Faraday A369 evaluation board.
>>> However the u-boot source codes for A369 is still waiting for approval.
>>> Here is the link to u-boot patchwork:
>>
>> Ok, Thanks for your information.
>>
>>>
>>> http://patchwork.ozlabs.org/patch/242006/
>>>
>>>> Thanks,
>>>> Jagan.
>>>>
>>>> On Fri, Apr 26, 2013 at 1:32 PM, Kuo-Jung Su <dantesu at gmail.com> wrote:
>>>>> From: Kuo-Jung Su <dantesu at faraday-tech.com>
>>>>>
>>>>> Signed-off-by: Kuo-Jung Su <dantesu at faraday-tech.com>
>>>>> ---
>>>>>  drivers/mtd/spi/winbond.c |   17 ++++++++++++++++-
>>>>>  1 file changed, 16 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
>>>>> index 2716209..2a27837 100644
>>>>> --- a/drivers/mtd/spi/winbond.c
>>>>> +++ b/drivers/mtd/spi/winbond.c
>>>>> @@ -18,6 +18,21 @@ struct winbond_spi_flash_params {
>>>>>
>>>>>  static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
>>>>>         {
>>>>> +               .id                     = 0x2014,
>>>>> +               .nr_blocks              = 16,
>>>>> +               .name                   = "W25P80",
>>
>> W25P80 is an 8Mbit flash right, is this name W25P80 or W25P08?
>> ofcourse, I have seen the same on datasheet as well.
>>
>
> It's W25P80.
> They are formally NexFlash NX25P80, NX25P16 and NX25P32.
>
> I've google for the W25P08, it looks like that Windond did have
> some legacy small SPI flash: W25P01, W25P02 .. W25P16.
> I guess it's a different production line...
>
> BTW I don't have these chips and corresponding datasheet, too.

Ok.

Can you use the commit msg header as
"sf: winbond: "
Which is used for winbond mtd driver since from long, of-course not a
big deal and
also mentioned atleast single line message on body.

Simple recommendation here:.
"Add support for Winbond's W25PXX SPI flash.
These devices is used on Faraday A369 evaluation board"

Thanks,
Jagan.


More information about the U-Boot mailing list