[U-Boot] [PATCH 0/3] Add Arndale board support

[Minkyu Kang]

On 26/03/13 18:37, Inderpal Singh wrote:
> The Arndale board is based on samsung's exynos5250 SOC.
> 
> First patch just removes the redundant SPI configs from common exynos5250
> config file. Second patch moves the board specific configs to board specific
> config file. The third adds the andale board support.
> 
> This patchset depends on [1] for tzpc initialization, on [2] for copying
> u-boot to RAM from spl, and on first 6 patches of [3] for mmc support.
> 
> [1] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/156168
> [2] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/156272
> [3] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/155368
> 
> Inderpal Singh (3):
>   exynos5250: remove redundant SPI related configs
>   exynos5250: move board specific configs to board specific config file
>   exynos5250: Add arndale board support
> 
>  MAINTAINERS                              |    4 +
>  board/samsung/arndale/Makefile           |   54 +++
>  board/samsung/arndale/arndale.c          |  117 ++++++
>  board/samsung/arndale/arndale_spl.c      |   66 +++
>  board/samsung/arndale/clock_init.c       |  655 ++++++++++++++++++++++++++++++
>  board/samsung/arndale/clock_init.h       |  149 +++++++
>  board/samsung/arndale/dmc_common.c       |  199 +++++++++
>  board/samsung/arndale/dmc_init_ddr3.c    |  228 +++++++++++
>  board/samsung/arndale/lowlevel_init.S    |   92 +++++
>  board/samsung/arndale/setup.h            |  569 ++++++++++++++++++++++++++
>  board/samsung/dts/exynos5250-arndale.dts |   36 ++
>  boards.cfg                               |    1 +
>  include/configs/arndale.h                |   39 ++
>  include/configs/exynos5250-dt.h          |   29 +-
>  include/configs/smdk5250.h               |   12 +-
>  include/configs/snow.h                   |   12 +-
>  tools/Makefile                           |    2 +
>  17 files changed, 2232 insertions(+), 32 deletions(-)
>  create mode 100644 board/samsung/arndale/Makefile
>  create mode 100644 board/samsung/arndale/arndale.c
>  create mode 100644 board/samsung/arndale/arndale_spl.c
>  create mode 100644 board/samsung/arndale/clock_init.c
>  create mode 100644 board/samsung/arndale/clock_init.h
>  create mode 100644 board/samsung/arndale/dmc_common.c
>  create mode 100644 board/samsung/arndale/dmc_init_ddr3.c
>  create mode 100644 board/samsung/arndale/lowlevel_init.S
>  create mode 100644 board/samsung/arndale/setup.h
>  create mode 100644 board/samsung/dts/exynos5250-arndale.dts
>  create mode 100644 include/configs/arndale.h
> 

Patch 1,2 looks good.
But please rebase.

please split patch 3 to another patchset.
And please check Wolfgang's review.

Thanks,
Minkyu Kang.