[U-Boot] [PATCH 3/6] README: mx28_common: Fix structure of sentence
Fabio Estevam
festevam at gmail.com
Fri May 3 20:07:59 CEST 2013
From: Fabio Estevam <fabio.estevam at freescale.com>
Re-structure the sentence a bit so that it can clearer.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
doc/README.mx28_common | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/doc/README.mx28_common b/doc/README.mx28_common
index bd12cab..c7a6839 100644
--- a/doc/README.mx28_common
+++ b/doc/README.mx28_common
@@ -102,10 +102,9 @@ discussed in the following chapters.
To boot a MX28 based board from SD, set the boot mode DIP switches according
to i.MX28 manual chapter 12.2.1 (Table 12-2).
-An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition
-table, which in turn carries a partition of special type and which contains a
-special header. The rest of partitions in the DOS partition table can be used
-by the user.
+The SD card used to boot U-Boot must contain a DOS partition table, which in
+turn carries a partition of special type and which contains a special header.
+The rest of partitions in the DOS partition table can be used by the user.
To prepare such partition, use your favourite partitioning tool. The partition
must have the following parameters:
--
1.7.9.5
More information about the U-Boot
mailing list