[U-Boot] [PATCH 4/6] README: mxs: Introduce README.mxs

Marek Vasut marex at denx.de
Fri May 3 21:54:19 CEST 2013


Dear Fabio Estevam,

> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Create a README.mxs file that contains instructions on how to use U-boot
> for both MX23 and MX28.
> 
> As boot from NAND has only been tested on mx28, make it clear that it only
> applies to MX28.
> 
> While at it, do some small cleanups for the sake of consistency:
> - Use "MX28" instead of "i.MX28"
> - Use "section" instead of "chapter" when referring to specific parts of
> the reference manual chapters.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  doc/README.m28                         |    4 +--
>  doc/README.mx28evk                     |    3 +-
>  doc/{README.mx28_common => README.mxs} |   62
> +++++++++++++++++++------------- 3 files changed, 40 insertions(+), 29
> deletions(-)
>  rename doc/{README.mx28_common => README.mxs} (80%)
> 
> diff --git a/doc/README.m28 b/doc/README.m28
> index 2a92226..cb3ae20 100644
> --- a/doc/README.m28
> +++ b/doc/README.m28
> @@ -9,5 +9,5 @@ arch/arm/include/asm/arch-mxs/	- Header files for the
> Freescale i.MX28 board/denx/m28evk/		- M28EVK board specific files
>  include/configs/m28evk.h	- M28EVK configuration file
> 
> -Follow the instructions from doc/README.mx28_common to generate a bootable
> SD -card or to boot from NAND flash.
> +Follow the instructions from doc/README.mxs to generate a bootable SD card
> or to +boot from NAND flash.
> diff --git a/doc/README.mx28evk b/doc/README.mx28evk
> index 76db474..524f3fc 100644
> --- a/doc/README.mx28evk
> +++ b/doc/README.mx28evk
> @@ -41,7 +41,6 @@ Note: The mx28evk board does not come with a NAND flash
> populated from the factory. It comes with an empty slot (U23), which
> allows the insertion of a 48-pin TSOP flash device.
> 
> -Follow the instructions from doc/README.mx28_common to generate a bootable
> SD -card.
> +Follow the instructions from doc/README.mxs to generate a bootable SD
> card.
> 
>  Insert the SD card in slot 0, power up the board and U-boot will boot.
> diff --git a/doc/README.mx28_common b/doc/README.mxs
> similarity index 80%
> rename from doc/README.mx28_common
> rename to doc/README.mxs
> index c7a6839..6d0929a 100644
> --- a/doc/README.mx28_common
> +++ b/doc/README.mxs
> @@ -1,12 +1,15 @@
> -Booting U-boot on a MX28 processor
> -==================================
> +Booting U-boot on a MXS processor

i.MX23 / i.MX28 instead of MXS ? MXS is no processor, maybe processor family?

[...]

Best regards,
Marek Vasut


More information about the U-Boot mailing list