[U-Boot] [U-Boot, v2] sf: winbond: Add support for W25PXX SPI flash

[Jagan Teki]

On 23-05-2013 20:39, Kuo-Jung Su wrote:
> From: Kuo-Jung Su <dantesu at faraday-tech.com>
>
> Add support for Winbond's W25PXX SPI flash.
> These devices is used on Faraday A369 evaluation board.
>
> Signed-off-by: Kuo-Jung Su <dantesu at faraday-tech.com>
> CC: Jagan Teki <jagannadh.teki at gmail.com>
> CC: Tom Rini <trini at ti.com>
>
> ---
> Changes for v2:
>     - Update commit message header
>     - Add commit message body
>
>   drivers/mtd/spi/winbond.c |   17 ++++++++++++++++-
>   1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
> index 2716209..2a27837 100644
> --- a/drivers/mtd/spi/winbond.c
> +++ b/drivers/mtd/spi/winbond.c
> @@ -18,6 +18,21 @@ struct winbond_spi_flash_params {
>   
>   static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
>   	{
> +		.id			= 0x2014,
> +		.nr_blocks		= 16,
> +		.name			= "W25P80",
> +	},
> +	{
> +		.id			= 0x2015,
> +		.nr_blocks		= 32,
> +		.name			= "W25P16",
> +	},
> +	{
> +		.id			= 0x2016,
> +		.nr_blocks		= 64,
> +		.name			= "W25P32",
> +	},
> +	{
>   		.id			= 0x3013,
>   		.nr_blocks		= 8,
>   		.name			= "W25X40",
> @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode)
>   	}
>   
>   	flash->page_size = 256;
> -	flash->sector_size = 4096;
> +	flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096;
>   	flash->size = 4096 * 16 * params->nr_blocks;
>   
>   	return flash;
Applied to u-boot-spi/master

--
Thanks,
Jagan.