[U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support

Stephen Warren swarren at wwwdotorg.org
Wed May 8 18:11:33 CEST 2013


On 05/03/2013 09:02 AM, Stephen Warren wrote:
> On 04/29/2013 03:21 AM, Jim Lin wrote:
>> Tegra114 USB EHCI is compatible with Tegra30 USB EHCI
>> except:
>> 1. Port Reset - Tegra30 takes 55ms, Tegra114 takes 50 ms to finish.
>> 2. PLL parameters.
>>
>> Jim Lin (3):
>>   ARM: Tegra: FDT: Add USB support for T20/T30/T114
>>   ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
>>   Tegra: Config: Enable Tegra30/Tegra114 USB function
> 
> The series,
> 
> Tested-by: Stephen Warren <swarren at nvidia.com>
> 
> On both Cardhu (Tegra30) and Dalmore (Tegra114). :-) :-) Now, I can
> netboot with upstream U-Boot on all my boards.

I just noticed one problem with this patch series. If I run the
following commands with Cardhu in its dock, and a USB Ethernet dongle
attached to the dock:

usb start 0
dhcp ${scriptaddr} boot.scr.uimg

... then everything works as expected; the file is downloaded.

However, if I run those same commands with Cardhu either undocked, or
docked but with no USB Ethernet dongle plugged into the dock, then the
dhcp command hangs the system hard; CTRL-C won't interrupt it for example.

Can you please fix this?


More information about the U-Boot mailing list