[U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support

Benoît Thébaudeau benoit.thebaudeau at advansee.com
Tue May 28 21:16:20 CEST 2013


Hi Alison,

On Tuesday, May 28, 2013 10:55:42 AM, Alison Wang wrote:
> This patch adds generic codes to support Freescale's Vybrid VF610 CPU.
> 
> It aligns Vybrid VF610 platform with i.MX platform. As there are
> some differences between VF610 and i.MX platforms, the specific
> codes are in the arch/arm/cpu/armv7/vf610 directory.
> 
> Signed-off-by: Alison Wang <b18965 at freescale.com>

[...]

> diff --git a/doc/README.vf610 b/doc/README.vf610
> new file mode 100644
> index 0000000..38cf5cf
> --- /dev/null
> +++ b/doc/README.vf610
> @@ -0,0 +1,10 @@
> +U-Boot for Freescale Vybrid VF610
> +
> +This file contains information for the port of U-Boot to the Freescale
> Vybrid
> +VF610 SoC.
> +
> +1. CONVENTIONS FOR FUSE ASSIGNMENTS
> +-----------------------------------
> +
> +1.1 MAC Address: It is stored in fuse bank 4, with the 16 msbs in word 2 and
> the
> +    32 lsbs in word 3.

The hunk below is still missing:

doc/README.mxc_ocotp:
---
 on MXC
 
 This IP can be found on the following SoCs:
+ - Vybrid VF610,
  - i.MX6.
 
 Note that this IP is different from albeit similar to the IPs of the same name
---

Apart from that, this patch is correct.

Best regards,
Benoît


More information about the U-Boot mailing list