[U-Boot] Pull request: u-boot-blackfin

[Sonic Zhang]

Hi Tom,

Please pull the following patches from u-boot-blackfin into your tree.

Thanks

Sonic

The following changes since commit fe8e4dbad1d31c452af3fbabba21e72b210381b3:

  nds32: Use sections header to obtain link symbols (2013-05-08 12:38:10 +0800)

are available in the git repository at:

  git://git.denx.de/u-boot-blackfin.git master

for you to fetch changes up to 2ac75146988bdcf8c30aee9c286af7f2f93b474e:

  bfin: Move gpio support for bf54x and bf60x into the generic driver
folder. (2013-05-09 10:53:47 +0800)

----------------------------------------------------------------
Bob Liu (3):
      blackfin: reduce size of u-boot.ldr in bf548-ezkit default config.
      blackfin: add baudrate to bdinfo
      blackfin: bf609: add softswitch config command

Marek Vasut (1):
      blackfin: The buf variable in bfin_mac.c is not used and produces warning,

Mike Frysinger (1):
      Blackfin: adjust asm constraints with NMI workaround

Scott Jiang (3):
      bfin: Remove spi dma function in bf5xx.
      bfin: discard invalid data and clear RXS in bf5xx spi driver
      bf609: add SPI register base address

Sonic Zhang (14):
      blackfin: Change the member's type in dma structures.
      blackfin: limit the max memory dma peripheral transfer size to 4 bytes.
      blackfin: run core1 from L1 code sram start address in uboot
init code on core 0
      blackfin: Set correct early debug serial baudrate.
      blackfin: Correct early serial mess output in BYPASS boot mode.
      blackfin: bf609: implement soft switch
      blackfin: Fit u-boot image size into limited nor flash on blackfin.
      blackfin: Enable early print via the generic serial API.
      blackfin: Add memory virtual console to blackfin serial driver.
      blackfin: Uart divisor should be set after their values are generated.
      blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
      blackfin: Move blackfin serial driver out of blackfin arch folder.
      blackfin: Add comments for watchdog event initialization.
      bfin: Move gpio support for bf54x and bf60x into the generic
driver folder.

 arch/blackfin/cpu/Makefile                         |    4 +-
 arch/blackfin/cpu/cpu.c                            |   32 +-
 arch/blackfin/cpu/gpio.c                           |  145 +------
 arch/blackfin/cpu/initcode.c                       |   71 ++--
 arch/blackfin/cpu/start.S                          |   29 +-
 arch/blackfin/include/asm/clock.h                  |   78 ++++
 arch/blackfin/include/asm/dma.h                    |   24 +-
 arch/blackfin/include/asm/gpio.h                   |   62 +--
 arch/blackfin/include/asm/mach-bf561/BF561_def.h   |    2 +
 arch/blackfin/include/asm/mach-bf609/BF609_def.h   |    5 +
 arch/blackfin/include/asm/portmux.h                |    5 -
 arch/blackfin/{cpu => include/asm}/serial.h        |   23 +-
 arch/blackfin/{cpu => include/asm}/serial1.h       |   48 +--
 arch/blackfin/{cpu => include/asm}/serial4.h       |   27 +-
 arch/blackfin/include/asm/soft_switch.h            |   18 +
 arch/blackfin/lib/board.c                          |    6 +-
 arch/blackfin/lib/clocks.c                         |   12 +-
 arch/blackfin/lib/string.c                         |    9 +-
 board/bf609-ezkit/soft_switch.c                    |  171 ++++++++
 board/bf609-ezkit/soft_switch.h                    |   80 ++++
 common/Makefile                                    |    1 +
 common/cmd_softswitch.c                            |   41 ++
 doc/README.watchdog                                |    3 +
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/adi_gpio2.c                           |  440 ++++++++++++++++++++
 drivers/net/bfin_mac.c                             |    2 -
 drivers/serial/Makefile                            |    1 +
 .../cpu/serial.c => drivers/serial/serial_bfin.c   |  110 +++--
 drivers/spi/bfin_spi.c                             |  105 +----
 drivers/watchdog/Makefile                          |    1 +
 .../cpu/watchdog.c => drivers/watchdog/bfin_wdt.c  |    7 +-
 include/configs/bf527-ezkit.h                      |   12 +-
 include/configs/bf537-stamp.h                      |   10 +-
 include/configs/bf548-ezkit.h                      |   25 +-
 include/configs/bf561-ezkit.h                      |    5 +
 include/configs/bf609-ezkit.h                      |   10 +
 include/configs/bfin_adi_common.h                  |   14 +-
 include/watchdog.h                                 |    3 +-
 38 files changed, 1163 insertions(+), 479 deletions(-)
 create mode 100644 arch/blackfin/include/asm/clock.h
 rename arch/blackfin/{cpu => include/asm}/serial.h (82%)
 rename arch/blackfin/{cpu => include/asm}/serial1.h (94%)
 rename arch/blackfin/{cpu => include/asm}/serial4.h (86%)
 create mode 100644 arch/blackfin/include/asm/soft_switch.h
 create mode 100644 board/bf609-ezkit/soft_switch.c
 create mode 100644 board/bf609-ezkit/soft_switch.h
 create mode 100644 common/cmd_softswitch.c
 create mode 100644 drivers/gpio/adi_gpio2.c
 rename arch/blackfin/cpu/serial.c => drivers/serial/serial_bfin.c (79%)
 rename arch/blackfin/cpu/watchdog.c => drivers/watchdog/bfin_wdt.c (64%)