[U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)

Tom Rini trini at ti.com
Tue May 14 16:52:31 CEST 2013


On Tue, May 14, 2013 at 01:24:41PM +0300, Lubomir Popov wrote:
> Hi Tom,
> 
> I'm currently busy with other work; on the other hand, careful
> rebasing shall require some time, especially the Palmas stuff.
> What would be the deadline for a V2 submission?
> 
> Meanwhile could you please have a look at the (already old)
> http://patchwork.ozlabs.org/patch/232743/? A simple patch,
> shall be needed if we enable USB (for the uEVM along with
> our board). In general, what are your plans regarding USB
> (.../patch/232742/)?

Thanks for the reminder, I'll grab 232743 soon.  232742 looks OK, but do
you have a patch around for uEVM still?

> And again on I2C (.../patch/233823/): what is you final
> opinion? I'm confident that this patch is a major improvement
> for OMAP4/5 at least.

I'm inclined to go with it, just need to mentally unswap the i2c notes
in my brain and think it over one more time.

[snip]
> >>>> +	 * TODO: Replace this ugly hardcoding with proper defines +
> >>>> */ +	writel(0x0100, 0x4ae0a310);
> >>>
> >>> Again, do please.
> >> This should be (*scrm)->auxclk0. The problem is that the
> >> omap5_scrm_regs struct (holding the auxclk0 member) has to be
> >> defined somewhere in the common OMAP5 headers. Sricharan? Or should
> >> I hack around?
> > 
> > Add it to the most likely struct in the headers.
> The entire struct (I call it omap5_scrm_regs in theory, similar to the
> corresponding omap4_scrm_regs for OMAP4) is not defined anywhere. Of
> course I could define only the member that I need, but I guess it is
> a (responsible) TI job to define hardware descriptors. Or I'm wrong?
> Please advise. If I have time, I could do it myself - it's some 27
> registers, almost identical to the OMAP4, and should go into 
> arch/arm/include/asm/arch-omap5/clocks.h.

Whomever uses / needs it should do it.  I gave the TRM a quick read and
I don't see any conflicts per-se just some reserved areas being named
and vice versa.  So rename it to omap_scrm_regs and move to
<asm/omap_common.h>.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130514/b4f984e3/attachment.pgp>


More information about the U-Boot mailing list