[U-Boot] [PULL] : Please pull u-boot-imx - correction
Albert ARIBAUD
albert.u.boot at aribaud.net
Sat May 11 11:15:09 CEST 2013
On Sat, 11 May 2013 09:30:57 +0200, Albert ARIBAUD
<albert.u.boot at aribaud.net> wrote:
> Hi Stefano,
>
> On Tue, 07 May 2013 09:55:08 +0200, Stefano Babic <sbabic at denx.de>
> wrote:
>
> > Hi Albert,
> >
> > please pull from u-boot-imx, thanks !
> >
> > The following changes since commit f2e8a87305a55652488af140adcf65b1e688f287:
> >
> > exynos: fdt: Add TMU node for snow (2013-04-17 10:00:44 +0900)
> >
> > are available in the git repository at:
> >
> > git://www.denx.de/git/u-boot-imx.git master
> >
> > for you to fetch changes up to d782c1fe7246301143ed78c0d86ea6c81f9325f9:
> >
> > arm: mxs: video: Enable MXS LCDIF on M28EVK (2013-05-06 17:40:23 +0200)
> >
> > ----------------------------------------------------------------
> > Benoît Thébaudeau (40):
> > imx: Homogenize and fix fuse register definitions
> > imx: Add useful fuse definitions
> > Add fuse API and commands
> > Add fsl_iim driver
> > mpc: iim: Switch to common fsl_iim
> > mx51evk: Enable support for iim
> > Add mxc_ocotp driver
> > mx6qsabrelite: Enable support for ocotp
> > nitrogen6x: Enable support for ocotp
> > imx: Document fuse assignments for MAC addresses
> > imx: iomux-v3: Fix common pad control definitions
> > imx: iomux-v3: cosmetic: Reorganize definitions
> > imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro
> > imx: iomux-v3: Include PKE and PUE to pad control pull definitions
> > imx: iomux-v3: Add iomux-mx25.h
> > imx: mx25pdk: Convert to iomux-v3
> > imx: mx25pdk: Fix GPIO assignments
> > imx: tx25: Convert to iomux-v3
> > imx: zmx25: Convert to iomux-v3
> > imx: mx25: Remove legacy iomux support
> > imx: iomux-v3: Add iomux-mx35.h
> > imx: flea3: Convert to iomux-v3
> > imx: mx35pdk: Fix WDOG_RST iomux function
> > imx: mx35pdk: Convert to iomux-v3
> > imx: woodburn: Convert to iomux-v3
> > imx: mx35: Remove legacy iomux support
> > imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
> > imx: iomux-v3: Add missing definitions to iomux-mx51.h
> > imx: mx51evk: Convert to iomux-v3
> > imx: mx51_efikamx/sb: Convert to iomux-v3
> > imx: vision2: Convert to iomux-v3
> > imx: iomux-v3: Add iomux-mx53.h
> > imx: ima3-mx53: Convert to iomux-v3
> > imx: mx53ard: Convert to iomux-v3
> > imx: mx53evk: Convert to iomux-v3
> > imx: mx53loco: Convert to iomux-v3
> > imx: mx53smd: Convert to iomux-v3
> > imx: m53evk: Convert to iomux-v3
> > imx: mx5: Remove legacy iomux support
> > imx: mx35pdk: Fix MUX2_CTR GPIO
> >
> > Eric Benard (1):
> > mx28evk: add trimffs to nand command
> >
> > Fabio Estevam (22):
> > iomux-v3: Place pad control definitions into common file
> > mx6: Add solo-lite variant support
> > mx6sl: Add initial support for mx6slevk board
> > imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
> > nitrogen6x: Setup CCM_CCOSR register
> > mx51evk: Update environment in order to allow booting a dt kernel
> > mx51evk: Do not force the rootfs type
> > mx5: Define a common get_board_rev()
> > mx5: Select CONFIG_REVISION_TAG
> > mx53ard: Move register masks into imx-regs.h
> > mx23: Put back RAM voltage level to its original value
> > mx23: Fix pad voltage selection bit
> > mx23evk: Fix DDR pin iomux settings
> > mx23_olinuxino: Fix DDR pin iomux settings
> > mxs: spl_mem_init: Fix comment about start bit
> > mxs: spl_mem_init: Remove erroneous DDR setting
> > mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
> > mxs: spl_mem_init: Change EMI port priority
> > mx23: Operate DDR voltage supply at 2.5V
> > mx23evk: Do not set voltage selection bit for SSP pads
> > mx23_olinuxino: Do not set voltage selection bit for SSP pads
> > mxs: Explain why some mx23 DDR registers are not configured
> >
> > Marek Vasut (13):
> > tools: arm: imx: Implement BOOT_OFFSET command for imximage
> > imx: Align the imximage header and payload to multiples of 4k
> > nand: Add SPL_NAND support to mxc_nand_spl
> > arm: imx: Pack u-boot.bin into uImage for SPL
> > arm: mx5: Add SPL support code to MX5
> > arm: mx5: Add NAND clock handling
> > arm: mx5: Add support for DENX M53EVK
> > arm: mx23: Fix VDDMEM misconfiguration
> > arm: mxs: Preprocess u-boot.bd so they contain full path
> > arm: mxs: Add LCDIF clock configuration function
> > arm: mxs: Add LCDIF registers for i.MX233
> > arm: mxs: Add MXS LCDIF driver
> > arm: mxs: video: Enable MXS LCDIF on M28EVK
> >
> > Otavio Salvador (9):
> > mx6qsabre{sd, auto}: Add update_sd_firmware support
> > mx6qsabresd: Return status when initializing MMC
> > wandboard: Use env storage info for mmcdev/mmcpart
> > wandboard: Add update_sd_firmware support
> > wandboard: Add card detection for SOM MicroSD card
> > wandboard: Add support for Carrier Board MicroSD card
> > wandboard: Add boot selection support
> > mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
> > mx53ard: Rework default environment to support FDT, MMC and netboot
> >
> > Philip Paeps (2):
> > mx35 iomux: correct offsets of IOMUX registers
> > mx35 iomux: correct input select register index
> >
> > Shawn Guo (1):
> > ARM: mx6: define CONFIG_ARM_ERRATA_742230
> >
> > Stefan Roese (7):
> > arm: imx: Change iomux functions to void type
> > imx: Move some header files from arch-mxs to imx-common
> > imx: Move some i.MX common functions into the imx-common directory
> > dma: Add i.MX6 support to drivers/dma/apbh_dma.c
> > mtd: mxs_nand: Add support for i.MX6
> > imx: Add titanium board support (i.MX6 based)
> > arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.h
> >
> > Stefano Babic (1):
> > Merge branch 'next'
> >
> > .gitignore | 1 +
> > MAINTAINERS | 4 +
> > Makefile | 9 +-
> > README | 1 +
> > arch/arm/cpu/arm1136/mx35/Makefile | 1 -
> > arch/arm/cpu/arm1136/mx35/iomux.c | 114 --
> > arch/arm/cpu/arm926ejs/mx25/generic.c | 117 --
> > arch/arm/cpu/arm926ejs/mxs/Makefile | 10 +
> > arch/arm/cpu/arm926ejs/mxs/clock.c | 93 ++
> > arch/arm/cpu/arm926ejs/mxs/mxs.c | 65 +-
> > arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 46 +-
> > arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 50 +-
> > arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 4 +-
> > arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 4 +-
> > arch/arm/cpu/armv7/mx5/Makefile | 2 +-
> > arch/arm/cpu/armv7/mx5/clock.c | 14 +-
> > arch/arm/cpu/armv7/mx5/iomux.c | 186 ---
> > arch/arm/cpu/armv7/mx5/soc.c | 7 +
> > arch/arm/cpu/armv7/mx6/clock.c | 52 +-
> > arch/arm/cpu/armv7/mx6/soc.c | 11 +-
> > arch/arm/imx-common/Makefile | 22 +-
> > arch/arm/imx-common/iomux-v3.c | 18 +-
> > arch/arm/imx-common/misc.c | 84 ++
> > arch/arm/include/asm/arch-mx25/imx-regs.h | 21 +-
> > arch/arm/include/asm/arch-mx25/imx25-pinmux.h | 421 -------
> > arch/arm/include/asm/arch-mx25/iomux-mx25.h | 545 +++++++++
> > arch/arm/include/asm/arch-mx27/imx-regs.h | 3 +-
> > arch/arm/include/asm/arch-mx31/imx-regs.h | 22 +-
> > arch/arm/include/asm/arch-mx35/imx-regs.h | 19 +-
> > arch/arm/include/asm/arch-mx35/iomux-mx35.h | 1276
> > ++++++++++++++++++++
> > arch/arm/include/asm/arch-mx35/iomux.h | 295 -----
> > arch/arm/include/asm/arch-mx35/mx35_pins.h | 353 ------
> > arch/arm/include/asm/arch-mx5/clock.h | 1 +
> > arch/arm/include/asm/arch-mx5/imx-regs.h | 24 +-
> > arch/arm/include/asm/arch-mx5/iomux-mx51.h | 180 ++-
> > arch/arm/include/asm/arch-mx5/iomux-mx53.h | 1232
> > +++++++++++++++++++
> > arch/arm/include/asm/arch-mx5/iomux.h | 91 --
> > arch/arm/include/asm/arch-mx5/mx5x_pins.h | 879 --------------
> > arch/arm/include/asm/arch-mx5/spl.h | 19 +
> > arch/arm/include/asm/arch-mx6/clock.h | 1 +
> > arch/arm/include/asm/arch-mx6/crm_regs.h | 183 +--
> > arch/arm/include/asm/arch-mx6/imx-regs.h | 96 +-
> > arch/arm/include/asm/arch-mx6/mx6-pins.h | 4 +
> > arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 35 +-
> > arch/arm/include/asm/arch-mx6/mx6q_pins.h | 27 -
> > arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 25 +
> > arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +
> > arch/arm/include/asm/arch-mxs/clock.h | 1 +
> > arch/arm/include/asm/arch-mxs/imx-regs.h | 6 +-
> > arch/arm/include/asm/arch-mxs/iomux.h | 4 +
> > arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-digctl.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-i2c.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-lcdif.h | 38 +-
> > arch/arm/include/asm/arch-mxs/regs-lradc.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-ocotp.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-pinctrl.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-power-mx23.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-power-mx28.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-rtc.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-ssp.h | 2 +-
> > arch/arm/include/asm/arch-mxs/regs-timrot.h | 2 +-
> > .../arm/include/asm/{arch-mxs => imx-common}/dma.h | 12 +
> > arch/arm/include/asm/imx-common/imximage.cfg | 30 +
> > arch/arm/include/asm/imx-common/iomux-v3.h | 69 +-
> > .../asm/{arch-mxs => imx-common}/regs-apbh.h | 19 +-
> > .../asm/{arch-mxs => imx-common}/regs-bch.h | 12 +-
> > .../asm/{arch-mxs => imx-common}/regs-common.h | 0
> > .../asm/{arch-mxs => imx-common}/regs-gpmi.h | 2 +-
> > arch/powerpc/cpu/mpc512x/Makefile | 1 -
> > arch/powerpc/cpu/mpc512x/cpu_init.c | 2 +-
> > arch/powerpc/cpu/mpc512x/iim.c | 394 ------
> > arch/powerpc/include/asm/immap_512x.h | 2 +
> > board/CarMediaLab/flea3/flea3.c | 91 +-
> > board/boundary/nitrogen6x/clocks.cfg | 11 +
> > board/boundary/nitrogen6x/nitrogen6x.c | 42 +-
> > board/denx/m53evk/Makefile | 40 +
> > board/denx/m53evk/imximage.cfg | 108 ++
> > board/denx/m53evk/m53evk.c | 328 +++++
> > board/esg/ima3-mx53/ima3-mx53.c | 228 ++--
> > board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 11 +
> > board/freescale/mx23evk/spl_boot.c | 4 +-
> > board/freescale/mx25pdk/mx25pdk.c | 132 +-
> > board/freescale/mx35pdk/mx35pdk.c | 175 ++-
> > board/freescale/mx51evk/mx51evk.c | 348 ++----
> > board/freescale/mx51evk/mx51evk_video.c | 22 +-
> > board/freescale/mx53ard/mx53ard.c | 329 +++--
> > board/freescale/mx53evk/mx53evk.c | 289 ++---
> > board/freescale/mx53loco/mx53loco.c | 268 ++--
> > board/freescale/mx53loco/mx53loco_video.c | 68 +-
> > board/freescale/mx53smd/mx53smd.c | 152 +--
> > board/freescale/mx6qarm2/mx6qarm2.c | 17 +-
> > board/freescale/mx6qsabreauto/mx6qsabreauto.c | 22 +-
> > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 30 +-
> > board/freescale/mx6qsabresd/mx6qsabresd.c | 30 +-
> > board/freescale/mx6slevk/Makefile | 28 +
> > board/freescale/mx6slevk/imximage.cfg | 118 ++
> > board/freescale/mx6slevk/mx6slevk.c | 102 ++
> > board/freescale/titanium/Makefile | 36 +
> > board/freescale/titanium/imximage.cfg | 178 +++
> > board/freescale/titanium/titanium.c | 334 +++++
> > board/genesi/mx51_efikamx/efikamx-usb.c | 122 +-
> > board/genesi/mx51_efikamx/efikamx.c | 2 +-
> > board/karo/tx25/tx25.c | 107 +-
> > board/olimex/mx23_olinuxino/spl_boot.c | 4 +-
> > board/syteco/zmx25/zmx25.c | 143 +--
> > board/ttcontrol/vision2/vision2.c | 585 ++++-----
> > board/wandboard/wandboard.c | 113 +-
> > board/woodburn/woodburn.c | 69 +-
> > boards.cfg | 3 +
> > common/Makefile | 1 +
> > common/cmd_fuse.c | 168 +++
> > doc/README.fsl_iim | 48 +
> > doc/README.fuse | 67 +
> > doc/README.imx25 | 10 +
> > doc/README.imx27 | 10 +
> > doc/README.imx5 | 6 +
> > doc/README.imx6 | 10 +
> > doc/README.imximage | 18 +
> > doc/README.mxc_ocotp | 50 +
> > drivers/dma/apbh_dma.c | 5 +-
> > drivers/misc/Makefile | 2 +
> > drivers/misc/fsl_iim.c | 286 +++++
> > drivers/misc/mxc_ocotp.c | 216 ++++
> > drivers/mmc/mxsmmc.c | 2 +-
> > drivers/mtd/nand/mxc_nand_spl.c | 13 +-
> > drivers/mtd/nand/mxs_nand.c | 15 +-
> > drivers/spi/mxs_spi.c | 2 +-
> > drivers/usb/host/ehci-mx5.c | 73 --
> > drivers/video/Makefile | 1 +
> > drivers/video/cfb_console.c | 4 +
> > drivers/video/mxsfb.c | 189 +++
> > include/config_cmd_all.h | 1 +
> > include/configs/ac14xx.h | 5 +
> > include/configs/aria.h | 2 +-
> > include/configs/ima3-mx53.h | 3 -
> > include/configs/m28evk.h | 19 +
> > include/configs/m53evk.h | 256 ++++
> > include/configs/mecp5123.h | 2 +-
> > include/configs/mpc5121ads.h | 2 +-
> > include/configs/mx28evk.h | 1 +
> > include/configs/mx51evk.h | 51 +-
> > include/configs/mx53ard.h | 102 +-
> > include/configs/mx53evk.h | 1 +
> > include/configs/mx53smd.h | 1 +
> > include/configs/mx6_common.h | 1 +
> > include/configs/mx6qsabre_common.h | 14 +
> > include/configs/mx6qsabrelite.h | 5 +
> > include/configs/mx6slevk.h | 189 +++
> > include/configs/nitrogen6x.h | 5 +
> > include/configs/pdm360ng.h | 7 +
> > include/configs/titanium.h | 277 +++++
> > include/configs/wandboard.h | 24 +-
> > .../asm/arch-mx25/sys_proto.h => include/fuse.h | 30 +-
> > include/usb/ehci-fsl.h | 6 -
> > spl/Makefile | 8 +
> > tools/imximage.c | 17 +-
> > tools/imximage.h | 9 +-
> > tools/mxsboot.c | 8 +-
> > 160 files changed, 8884 insertions(+), 5340 deletions(-)
> > delete mode 100644 arch/arm/cpu/arm1136/mx35/iomux.c
> > delete mode 100644 arch/arm/cpu/armv7/mx5/iomux.c
> > create mode 100644 arch/arm/imx-common/misc.c
> > delete mode 100644 arch/arm/include/asm/arch-mx25/imx25-pinmux.h
> > create mode 100644 arch/arm/include/asm/arch-mx25/iomux-mx25.h
> > create mode 100644 arch/arm/include/asm/arch-mx35/iomux-mx35.h
> > delete mode 100644 arch/arm/include/asm/arch-mx35/iomux.h
> > delete mode 100644 arch/arm/include/asm/arch-mx35/mx35_pins.h
> > create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx53.h
> > delete mode 100644 arch/arm/include/asm/arch-mx5/iomux.h
> > delete mode 100644 arch/arm/include/asm/arch-mx5/mx5x_pins.h
> > create mode 100644 arch/arm/include/asm/arch-mx5/spl.h
> > create mode 100644 arch/arm/include/asm/arch-mx6/mx6sl_pins.h
> > rename arch/arm/include/asm/{arch-mxs => imx-common}/dma.h (93%)
> > create mode 100644 arch/arm/include/asm/imx-common/imximage.cfg
> > rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-apbh.h (97%)
> > rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-bch.h (96%)
> > rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-common.h (100%)
> > rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-gpmi.h (99%)
> > delete mode 100644 arch/powerpc/cpu/mpc512x/iim.c
> > create mode 100644 board/denx/m53evk/Makefile
> > create mode 100644 board/denx/m53evk/imximage.cfg
> > create mode 100644 board/denx/m53evk/m53evk.c
> > create mode 100644 board/freescale/mx6slevk/Makefile
> > create mode 100644 board/freescale/mx6slevk/imximage.cfg
> > create mode 100644 board/freescale/mx6slevk/mx6slevk.c
> > create mode 100644 board/freescale/titanium/Makefile
> > create mode 100644 board/freescale/titanium/imximage.cfg
> > create mode 100644 board/freescale/titanium/titanium.c
> > create mode 100644 common/cmd_fuse.c
> > create mode 100644 doc/README.fsl_iim
> > create mode 100644 doc/README.fuse
> > create mode 100644 doc/README.imx25
> > create mode 100644 doc/README.imx27
> > create mode 100644 doc/README.imx6
> > create mode 100644 doc/README.mxc_ocotp
> > create mode 100644 drivers/misc/fsl_iim.c
> > create mode 100644 drivers/misc/mxc_ocotp.c
> > create mode 100644 drivers/video/mxsfb.c
> > create mode 100644 include/configs/m53evk.h
> > create mode 100644 include/configs/mx6slevk.h
> > create mode 100644 include/configs/titanium.h
> > rename arch/arm/include/asm/arch-mx25/sys_proto.h => include/fuse.h (55%)
> >
> > Best regards,
> > Stefano
> >
>
> Applied to u-boot-arm/master (with two trivial merge resolutions),
> thanks!
Seems like the trivial merge resolution was less trivial than I thought
it was -- I accidentally removed from drivers/mtd/nand/mxc_nand_spl.c
the definitions for nand_init() and nand_deselect(). For some reason
I missed it in the MAKEALL -a arm I did. Rolling back and fixing this.
Amicalement,
--
Albert.
More information about the U-Boot
mailing list