[U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V
Marek Vasut
marex at denx.de
Mon May 6 04:19:28 CEST 2013
Dear Fabio Estevam,
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> After the recent fixes in the mx23 DDR setup, it is safe to operate DDR
> voltage at the recommended 2.5V voltage level again.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
Is this a tripple revert ?
Stefano, you can apply this before applying the patches I complained weren't
applied a few hours ago, it'll prevent merge conflict. Esp. this [PATCH] arm:
mx23: Fix VDDMEM misconfiguration
> ---
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index 41fb803..4ed197b 100644
> --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
> @@ -247,7 +247,7 @@ static void mx23_mem_setup_vddmem(void)
> struct mxs_power_regs *power_regs =
> (struct mxs_power_regs *)MXS_POWER_BASE;
>
> - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
> + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
> POWER_VDDMEMCTRL_ENABLE_ILIMIT |
> POWER_VDDMEMCTRL_ENABLE_LINREG |
> POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
> @@ -255,7 +255,7 @@ static void mx23_mem_setup_vddmem(void)
>
> early_delay(10000);
>
> - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
> + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
> POWER_VDDMEMCTRL_ENABLE_LINREG,
> &power_regs->hw_power_vddmemctrl);
> }
Best regards,
Marek Vasut
More information about the U-Boot
mailing list