[U-Boot] minimum bdi config to read flash on 85xx

[Monica]

Hi Fabio,

The CPU is imx6 customed processor.

The Prog command shows it passed but the u-boot.bin is not uploaded.

Regards,
Monica.S




From: Fabio Estevam-2 [via U-Boot] [mailto:ml-node+s10912n155717h46 at n7.nabble.com]
Sent: Monday, May 27, 2013 7:08 PM
To: Monica Sampathkumar
Subject: Re: minimum bdi config to read flash on 85xx

Hi Monica,

On Mon, May 27, 2013 at 10:01 AM, Monica <[hidden email]</user/SendEmail.jtp?type=node&node=155717&i=0>> wrote:

> We are using BDI3000 to Burn u-boot.bin to Flash memory. The flash we are
> using is Spansion S29GL512S.
>
> As per the flash datasheet we tried programming 4 bytes( using telnet mmb
> command) write buffer programming cycle. We succeeded.
>
> But when we tried programming a binary file ( u-boot.bin) ,it was failing.
> Even though the log shows Flash programming passed but in the location when
> we do a mdh there is no u-boot data.
>
> Please find the log captured below.
>
> IMX6#0>

Your email subject mentions 85xx, but the prompt above says mx6.

Which CPU does your board have?
_______________________________________________
U-Boot mailing list
[hidden email]</user/SendEmail.jtp?type=node&node=155717&i=1>
http://lists.denx.de/mailman/listinfo/u-boot

________________________________
If you reply to this email, your message will be added to the discussion below:
http://u-boot.10912.n7.nabble.com/minimum-bdi-config-to-read-flash-on-85xx-tp23684p155717.html
To unsubscribe from minimum bdi config to read flash on 85xx, click here<http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=23684&code=bW9uaWNhX3NAaGNsLmNvbXwyMzY4NHw3MDA1NTgxNTM=>.
NAML<http://u-boot.10912.n7.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>


::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------




--
View this message in context: http://u-boot.10912.n7.nabble.com/minimum-bdi-config-to-read-flash-on-85xx-tp23684p155770.html
Sent from the U-Boot mailing list archive at Nabble.com.