[U-Boot] minimum bdi config to read flash on 85xx

[Fabio Estevam]

Hi Monica,

On Mon, May 27, 2013 at 10:01 AM, Monica <monica_s at hcl.com> wrote:
> We are using BDI3000 to Burn u-boot.bin to Flash memory. The flash we are
> using is Spansion S29GL512S.
>
> As per the flash datasheet we tried programming 4 bytes( using telnet mmb
> command) write buffer programming cycle. We succeeded.
>
> But when we tried programming a binary file ( u-boot.bin) ,it was failing.
> Even though the log shows Flash programming passed but in the location when
> we do a mdh there is no u-boot data.
>
> Please find the log captured below.
>
> IMX6#0>

Your email subject mentions 85xx, but the prompt above says mx6.

Which CPU does your board have?