[U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Fix use of gpio number in SF chip select

Andrew Gabbasov andrew_gabbasov at mentor.com
Thu May 30 12:02:49 CEST 2013


The number of gpio signal is packed inside CONFIG_SF_DEFAULT_CS macro
(shifted and or'ed with chip select), so it's incorrect to pass
that macro directly as an argument to gpio_direction_output() call.
The gpio number should be extracted (shifted back) before that.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov at mentor.com>
---
 board/boundary/nitrogen6x/nitrogen6x.c        |    2 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index cc071d6..b588ac2 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -342,7 +342,7 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
 
 void setup_spi(void)
 {
-	gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
+	gpio_direction_output(CONFIG_SF_DEFAULT_CS >> 8, 1);
 	imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
 					 ARRAY_SIZE(ecspi1_pads));
 }
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index 9f9cac8..8b71e03 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -312,7 +312,7 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
 
 void setup_spi(void)
 {
-	gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
+	gpio_direction_output(CONFIG_SF_DEFAULT_CS >> 8, 1);
 	imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
 					 ARRAY_SIZE(ecspi1_pads));
 }
-- 
1.7.10.4



More information about the U-Boot mailing list