[U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices

[Andreas Bießmann]

Hi Bo,

On 22.05.13 10:45, Bo Shen wrote:
> Hi Andreas,
> 
> On 5/14/2013 05:31, Joe Hershberger wrote:
>> On Sun, May 12, 2013 at 6:33 AM, Andreas Bießmann
>> <andreas.devel at googlemail.com> wrote:
>>> Dear Bo Shen,
>>>
>>>
>>> On 12.03.2013 07:15, Bo Shen wrote:
>>>>
>>>> Add macb support for sama5d3x devices
>>>>
>>>> Signed-off-by: Bo Shen <voice.shen at atmel.com>
>>>> ---
>>>> change in v2:
>>>>     No change
>>>> ---
>>>>    drivers/net/macb.c |    6 ++++--
>>>>    1 file changed, 4 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
>>>> index 8bacbda..9e7fbc6 100644
>>>> --- a/drivers/net/macb.c
>>>> +++ b/drivers/net/macb.c
>>>> @@ -469,7 +469,8 @@ static int macb_init(struct eth_device *netdev,
>>>> bd_t
>>>> *bd)
>>>>    #if   defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
>>>>          defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
>>>> || \
>>>>          defined(CONFIG_AT91SAM9G45) ||
>>>> defined(CONFIG_AT91SAM9M10G45) || \
>>>> -       defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
>>>> +       defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5) || \
>>>> +       defined(CONFIG_SAMA5D3)
>>>
>>>
>>> I would like to apply http://patchwork.ozlabs.org/patch/239064/
>>> instead of
>>> this one.
>>> Joe, do you have any objections?
>>
>> Agreed.
> 
> Just remind to take this patch: net: macb: using AT91FAMILY replace
> #ifdeferry (http://patchwork.ozlabs.org/patch/239064/). or else the macb
> won't work with sama5d3xek board.

I thought this would go through Joe's tree. There are some patches
delegated to him regarding sama5 network too (gmac). I could pick up
this single patch however, lets wait some days for Joe to work on the
whole series.

Best regards

Andreas Bießmann