[U-Boot] [PATCH v2 03/16] sf: Add extended addr write support for winbond|stmicro

Jagannadha Sutradharudu Teki jagannadha.sutradharudu-teki at xilinx.com
Fri May 31 14:52:16 CEST 2013


This patch provides support to program a flash extended address
register for winbond and stmicro SPI flashes.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
Changes for v2:
        - none

 drivers/mtd/spi/spi_flash.c          | 2 ++
 drivers/mtd/spi/spi_flash_internal.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 193de42..05d1792 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -286,6 +286,8 @@ int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
 	idcode0 = flash->idcode0;
 	if (idcode0 == 0x01) {
 		cmd = CMD_BANKADDR_BRWR;
+	} else if ((idcode0 == 0xef) || (idcode0 == 0x20)) {
+		cmd = CMD_EXTNADDR_WREAR;
 	} else {
 		printf("SF: Unsupported bank addr write %02x\n", idcode0);
 		return -1;
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 2567bbc..de1a0df 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -31,6 +31,7 @@
 /* Bank addr acess commands */
 #define CMD_BANKADDR_BRWR		0x17
 #define CMD_BANKADDR_BRRD		0x16
+#define CMD_EXTNADDR_WREAR		0xC5
 
 /* Common status */
 #define STATUS_WIP			0x01
-- 
1.8.3




More information about the U-Boot mailing list