[U-Boot] [PATCH 1/3] ARM: OMAP4+: Cleanup header files
Lokesh Vutla
lokeshvutla at ti.com
Wed May 29 12:09:53 CEST 2013
After having the u-boot clean up series, there are
many definitions that are unused in header files.
Removing all those unused ones.
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
arch/arm/cpu/armv7/omap4/prcm-regs.c | 3 +++
arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 ++
arch/arm/include/asm/arch-omap4/clocks.h | 28 ---------------------------
arch/arm/include/asm/arch-omap4/cpu.h | 12 ------------
arch/arm/include/asm/arch-omap4/omap.h | 14 --------------
arch/arm/include/asm/arch-omap5/clocks.h | 22 ---------------------
arch/arm/include/asm/arch-omap5/cpu.h | 12 ------------
arch/arm/include/asm/arch-omap5/omap.h | 31 +-----------------------------
arch/arm/include/asm/omap_common.h | 4 +---
board/ti/omap5_uevm/evm.c | 12 ++++++++----
board/ti/panda/panda.c | 20 +++++++++++--------
board/ti/sdp4430/sdp.c | 16 +++++++++------
drivers/usb/musb/omap3.c | 4 +++-
13 files changed, 40 insertions(+), 140 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c
index 7225a30..7e71ca0 100644
--- a/arch/arm/cpu/armv7/omap4/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c
@@ -301,6 +301,8 @@ struct omap_sys_ctrl_regs const omap4_ctrl = {
.control_ldosram_iva_voltage_ctrl = 0x4A002320,
.control_ldosram_mpu_voltage_ctrl = 0x4A002324,
.control_ldosram_core_voltage_ctrl = 0x4A002328,
+ .control_usbotghs_ctrl = 0x4A00233C,
+ .control_padconf_core_base = 0x4A100000,
.control_pbiaslite = 0x4A100600,
.control_lpddr2io1_0 = 0x4A100638,
.control_lpddr2io1_1 = 0x4A10063C,
@@ -312,4 +314,5 @@ struct omap_sys_ctrl_regs const omap4_ctrl = {
.control_lpddr2io2_3 = 0x4A100654,
.control_efuse_1 = 0x4A100700,
.control_efuse_2 = 0x4A100704,
+ .control_padconf_wkup_base = 0x4A31E000,
};
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index e9f6a32..db779f2 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -311,6 +311,7 @@ struct prcm_regs const omap5_es1_prcm = {
struct omap_sys_ctrl_regs const omap5_ctrl = {
.control_status = 0x4A002134,
+ .control_padconf_core_base = 0x4A002800,
.control_paconf_global = 0x4A002DA0,
.control_paconf_mode = 0x4A002DA4,
.control_smart1io_padconf_0 = 0x4A002DA8,
@@ -358,6 +359,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
.control_port_emif2_sdram_config = 0x4AE0C118,
.control_emif1_sdram_config_ext = 0x4AE0C144,
.control_emif2_sdram_config_ext = 0x4AE0C148,
+ .control_padconf_wkup_base = 0x4AE0C800,
.control_smart1nopmio_padconf_0 = 0x4AE0CDA0,
.control_smart1nopmio_padconf_1 = 0x4AE0CDA4,
.control_padconf_mode = 0x4AE0CDA8,
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index ed7a1c8..f544edf 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -34,25 +34,6 @@
*/
#define LDELAY 1000000
-#define CM_CLKMODE_DPLL_CORE 0x4A004120
-#define CM_CLKMODE_DPLL_PER 0x4A008140
-#define CM_CLKMODE_DPLL_MPU 0x4A004160
-#define CM_CLKSEL_CORE 0x4A004100
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL 0
-#define CM_IDLEST_DPLL 0x4
-#define CM_AUTOIDLE_DPLL 0x8
-#define CM_CLKSEL_DPLL 0xC
-#define CM_DIV_M2_DPLL 0x10
-#define CM_DIV_M3_DPLL 0x14
-#define CM_DIV_M4_DPLL 0x18
-#define CM_DIV_M5_DPLL 0x1C
-#define CM_DIV_M6_DPLL 0x20
-#define CM_DIV_M7_DPLL 0x24
-
-#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
-
/* CM_DLL_CTRL */
#define CM_DLL_CTRL_OVERRIDE_SHIFT 0
#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0)
@@ -94,8 +75,6 @@
#define CM_CLKSEL_DCC_EN_SHIFT 22
#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
-#define OMAP4_DPLL_MAX_N 127
-
/* CM_SYS_CLKSEL */
#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
@@ -181,9 +160,7 @@
#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
/* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
-#define OMAP_32K_CLK_FREQ 32768
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
@@ -234,11 +211,6 @@
#define ALTCLKSRC_MODE_ACTIVE 1
-/* Defines for DPLL setup */
-#define DPLL_LOCKED_FREQ_TOLERANCE_0 0
-#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500
-#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000
-
#define DPLL_NO_LOCK 0
#define DPLL_LOCK 1
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index 3a0bfbf..311c6ff 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -115,18 +115,6 @@ struct watchdog {
#define WD_UNLOCK1 0xAAAA
#define WD_UNLOCK2 0x5555
-#define SYSCLKDIV_1 (0x1 << 6)
-#define SYSCLKDIV_2 (0x1 << 7)
-
-#define CLKSEL_GPT1 (0x1 << 0)
-
-#define EN_GPT1 (0x1 << 0)
-#define EN_32KSYNC (0x1 << 2)
-
-#define ST_WDT2 (0x1 << 5)
-
-#define RESETDONE (0x1 << 0)
-
#define TCLR_ST (0x1 << 0)
#define TCLR_AR (0x1 << 1)
#define TCLR_PRE (0x1 << 5)
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index e9a6ffe..2cd034e 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -47,14 +47,6 @@
#define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START
#define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END
-/* CONTROL */
-#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000)
-#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000)
-
-/* LPDDR2 IO regs */
-#define LPDDR2_IO_REGS_BASE 0x4A100638
-
/* CONTROL_ID_CODE */
#define CONTROL_ID_CODE 0x4A002204
@@ -79,15 +71,9 @@
/* Watchdog Timer2 - MPU watchdog */
#define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000)
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000)
-
/* GPMC */
#define OMAP44XX_GPMC_BASE 0x50000000
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000
-
/*
* Hardware Register Details
*/
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index 68afa76..6673a02 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -35,19 +35,6 @@
*/
#define LDELAY 1000000
-#define CM_CLKMODE_DPLL_CORE (OMAP54XX_L4_CORE_BASE + 0x4120)
-#define CM_CLKMODE_DPLL_PER (OMAP54XX_L4_CORE_BASE + 0x8140)
-#define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160)
-#define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100)
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL 0
-#define CM_IDLEST_DPLL 0x4
-#define CM_AUTOIDLE_DPLL 0x8
-#define CM_CLKSEL_DPLL 0xC
-
-#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
-
/* CM_DLL_CTRL */
#define CM_DLL_CTRL_OVERRIDE_SHIFT 0
#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0)
@@ -93,8 +80,6 @@
#define CM_CLKSEL_DCC_EN_SHIFT 22
#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
-#define OMAP4_DPLL_MAX_N 127
-
/* CM_SYS_CLKSEL */
#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
@@ -195,9 +180,7 @@
#define RSTTIME1_MASK (0x3ff << 0)
/* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
-#define OMAP_32K_CLK_FREQ 32768
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
@@ -247,11 +230,6 @@
#define TPS62361_BASE_VOLT_MV 500
#define TPS62361_VSEL0_GPIO 7
-/* Defines for DPLL setup */
-#define DPLL_LOCKED_FREQ_TOLERANCE_0 0
-#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500
-#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000
-
#define DPLL_NO_LOCK 0
#define DPLL_LOCK 1
diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h
index 044ab55..4753f46 100644
--- a/arch/arm/include/asm/arch-omap5/cpu.h
+++ b/arch/arm/include/asm/arch-omap5/cpu.h
@@ -119,18 +119,6 @@ struct watchdog {
#define WD_UNLOCK1 0xAAAA
#define WD_UNLOCK2 0x5555
-#define SYSCLKDIV_1 (0x1 << 6)
-#define SYSCLKDIV_2 (0x1 << 7)
-
-#define CLKSEL_GPT1 (0x1 << 0)
-
-#define EN_GPT1 (0x1 << 0)
-#define EN_32KSYNC (0x1 << 2)
-
-#define ST_WDT2 (0x1 << 5)
-
-#define RESETDONE (0x1 << 0)
-
#define TCLR_ST (0x1 << 0)
#define TCLR_AR (0x1 << 1)
#define TCLR_PRE (0x1 << 5)
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 4f43a90..6dfedf4 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -44,16 +44,8 @@
#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START
#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END
-/* CONTROL */
-#define CTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE (CTRL_BASE + 0x0800)
-#define CONTROL_PADCONF_WKUP (OMAP54XX_L4_WKUP_BASE + 0xc800)
-
-/* LPDDR2 IO regs. To be verified */
-#define LPDDR2_IO_REGS_BASE 0x4A100638
-
/* CONTROL_ID_CODE */
-#define CONTROL_ID_CODE (CTRL_BASE + 0x204)
+#define CONTROL_ID_CODE 0x4A002204
/* To be verified */
#define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F
@@ -62,11 +54,6 @@
#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F
#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F
-/* STD_FUSE_PROD_ID_1 */
-#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218)
-#define PROD_ID_1_SILICON_TYPE_SHIFT 16
-#define PROD_ID_1_SILICON_TYPE_MASK (3 << 16)
-
/* UART */
#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000)
#define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000)
@@ -80,15 +67,9 @@
/* Watchdog Timer2 - MPU watchdog */
#define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000)
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE (OMAP54XX_L4_WKUP_BASE + 0x4000)
-
/* GPMC */
#define OMAP54XX_GPMC_BASE 0x50000000
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000
-
/*
* Hardware Register Details
*/
@@ -191,16 +172,6 @@ struct s32ktimer {
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4031F000
-/* Silicon revisions */
-#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
-#define OMAP4430_ES1_0 0x44300100
-#define OMAP4430_ES2_0 0x44300200
-#define OMAP4430_ES2_1 0x44300210
-#define OMAP4430_ES2_2 0x44300220
-#define OMAP4430_ES2_3 0x44300230
-#define OMAP4460_ES1_0 0x44600100
-#define OMAP4460_ES1_1 0x44600110
-
/* CONTROL_SRCOMP_XXX_SIDE */
#define OVERRIDE_XS_SHIFT 30
#define OVERRIDE_XS_MASK (1 << 30)
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index ee7b188..8747bff 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -362,6 +362,7 @@ struct omap_sys_ctrl_regs {
u32 control_ldosram_iva_voltage_ctrl;
u32 control_ldosram_mpu_voltage_ctrl;
u32 control_ldosram_core_voltage_ctrl;
+ u32 control_usbotghs_ctrl;
u32 control_padconf_core_base;
u32 control_paconf_global;
u32 control_paconf_mode;
@@ -546,9 +547,6 @@ void scale_vcores(struct vcores_data const *);
u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
-/* Max value for DPLL multiplier M */
-#define OMAP_DPLL_MAX_N 127
-
/* HW Init Context */
#define OMAP_INIT_CONTEXT_SPL 0
#define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index 46db1bf..90046e8 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -71,22 +71,26 @@ int misc_init_r(void)
void set_muxconf_regs_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
}
void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
}
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 2bbe392..4335259 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -139,16 +139,18 @@ int misc_init_r(void)
void set_muxconf_regs_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() >= OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential_4460,
sizeof(wkup_padconf_array_essential_4460) /
sizeof(struct pad_conf_entry));
@@ -156,27 +158,29 @@ void set_muxconf_regs_essential(void)
void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() < OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_CORE,
+ do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_non_essential_4430,
sizeof(core_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
else
- do_set_mux(CONTROL_PADCONF_CORE,
+ do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_non_essential_4460,
sizeof(core_padconf_array_non_essential_4460) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() < OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_non_essential_4430,
sizeof(wkup_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 4c1a4f7..5dd1ba3 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -72,16 +72,18 @@ int misc_init_r(void)
void set_muxconf_regs_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() >= OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential_4460,
sizeof(wkup_padconf_array_essential_4460) /
sizeof(struct pad_conf_entry));
@@ -89,16 +91,18 @@ void set_muxconf_regs_essential(void)
void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() < OMAP4460_ES1_0) {
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_non_essential_4430,
sizeof(wkup_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index c7876ed..a395ebc 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -30,6 +30,7 @@
* MA 02111-1307 USA
*/
+#include <asm/omap_common.h>
#include <twl4030.h>
#include <twl6030.h>
#include "omap3.h"
@@ -135,7 +136,8 @@ int musb_platform_init(void)
#endif
#ifdef CONFIG_OMAP4430
- u32 *usbotghs_control = (u32 *)(CTRL_BASE + 0x33C);
+ u32 *usbotghs_control =
+ (u32 *)((*ctrl)->control_usbotghs_ctrl);
*usbotghs_control = 0x15;
#endif
platform_needs_initialization = 0;
--
1.7.9.5
More information about the U-Boot
mailing list