[U-Boot] [PATCH v3 12/12] board:smdk5250: switch to new i2c framework
Piotr Wilczek
p.wilczek at samsung.com
Fri May 17 14:55:55 CEST 2013
Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
CC: Chander Kashyap <k.chander at samsung.com>
---
Changes in v3:
- new patch
Changes in v2: None
board/samsung/smdk5250/smdk5250.c | 2 +-
include/configs/exynos5250-dt.h | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 8b09e1d..4ceab3e 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -161,7 +161,7 @@ int power_init_board(void)
set_ps_hold_ctrl();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_I2C_S3C24X0_SPEED, CONFIG_SYS_I2C_S3C24X0_SLAVE);
if (pmic_init(I2C_PMIC))
return -1;
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 4514e7a..5794886 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -232,13 +232,13 @@
/* I2C */
#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */
-#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */
+#define CONFIG_SYS_I2C_S3C24X0
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_MAX_I2C_NUM 8
-#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0
#define CONFIG_I2C_EDID
/* PMIC */
--
1.7.9.5
More information about the U-Boot
mailing list