[U-Boot] [PATCH v3 11/12] board:VCMA9 switch to ne i2c framework
Piotr Wilczek
p.wilczek at samsung.com
Fri May 17 14:55:54 CEST 2013
Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
CC: David Müller <d.mueller at elsoft.ch>
---
Changes in v3:
- new patch
Changes in v2: None
include/configs/VCMA9.h | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 2b3d59f..5b2139f 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -89,12 +89,13 @@
* the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
* address 0x50 with 16bit addressing
*/
-#define CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave addr */
+#define CONFIG_SYS_I2C
/* we use the built-in I2C controller */
-#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* I2C speed */
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x7F /* I2C slave addr */
+
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
--
1.7.9.5
More information about the U-Boot
mailing list