[U-Boot] [PATCH v5 2/7] mx23evk: Fix DDR pin iomux settings

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Change MUX_CONFIG_EMI to use the same drive strength as the bootlets code from
Freescale, which results in much better stability.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v4:
- None
Changes since v3:
- None
Changes since v2:
- Only change the drive strength
Changes since v1:
- Only adjust MUX_CONFIG_EMI

 board/freescale/mx23evk/spl_boot.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/mx23evk/spl_boot.c b/board/freescale/mx23evk/spl_boot.c
index b6f4e7e..fd6b3d9 100644
--- a/board/freescale/mx23evk/spl_boot.c
+++ b/board/freescale/mx23evk/spl_boot.c
@@ -26,7 +26,7 @@
 #include <asm/arch/sys_proto.h>
 
 #define	MUX_CONFIG_SSP1	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_16MA | MXS_PAD_PULLUP)
+#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
 
 const iomux_cfg_t iomux_setup[] = {
 	/* DUART */
-- 
1.7.9.5