[U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
Liu Gang
Gang.Liu at freescale.com
Mon May 6 05:28:13 CEST 2013
On Tue, 2013-04-30 at 17:28 -0500, Andy Fleming wrote:
> On Fri, Mar 8, 2013 at 2:41 AM, Liu Gang <Gang.Liu at freescale.com>
> wrote:
> Change the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" to
> "CONFIG_SRIO_PCIE_BOOT_MASTER", remove them from
> arch/powerpc/include/asm/config_mpc85xx.h file, and add those
> macros
> in configuration header file of each board which can support
> the
> master module of Boot from SRIO and PCIE.
>
> Signed-off-by: Liu Gang <Gang.Liu at freescale.com>
>
>
>
>
> More important than explaining what the patch does is explaining
> *why*. Why was this change necessary?
>
>
> Make sure the "why" includes what makes this feature a board feature,
> as opposed to an SoC feature?
>
>
> Andy
Thanks, I'll updated the commit message.
And in addition, why the state of the below patch is superseded?
http://patchwork.ozlabs.org/patch/226046/
More information about the U-Boot
mailing list