[U-Boot] [PATCH v4 1/7] mx23: Fix pad voltage selection bit

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

On mx23 the pad voltage selection bit needs to be always '0', since '1' is a 
reserved value.

For example:

Pin 108, EMI_A06 pin voltage selection:
0= 1.8V (mDDR) or 2.5V (DDR1);
1= reserved.

Fix the pad voltage definitions for the mx23 case.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
Acked-by: Marek Vasut <marex at denx.de>
---
Changes since v3:
- Add Marek's ack
Changes since v2:
- Only place PAD_3V3 inside the if/else block
Changes since v1:
- Newly introduced

 arch/arm/include/asm/arch-mxs/iomux.h |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/include/asm/arch-mxs/iomux.h b/arch/arm/include/asm/arch-mxs/iomux.h
index 4288715..f46895e 100644
--- a/arch/arm/include/asm/arch-mxs/iomux.h
+++ b/arch/arm/include/asm/arch-mxs/iomux.h
@@ -71,7 +71,11 @@ typedef u32 iomux_cfg_t;
 #define PAD_16MA		3
 
 #define PAD_1V8			0
+#if defined CONFIG_MX28
 #define PAD_3V3			1
+#else
+#define PAD_3V3			0
+#endif
 
 #define PAD_NOPULL		0
 #define PAD_PULLUP		1
-- 
1.7.9.5