[U-Boot] [PATCH v2] at91sam9260ek: move board id setup to config header
Andreas Bießmann
andreas.devel at googlemail.com
Fri May 10 17:05:30 CEST 2013
Signed-off-by: Andreas Bießmann <andreas.devel at googlemail.com>
Acked-by: Bo Shen <voice.shen at atmel.com>
---
Changes in v2:
* use only one ifdef for sam9G variants
board/atmel/at91sam9260ek/at91sam9260ek.c | 12 ------------
include/configs/at91sam9260ek.h | 18 ++++++++++++++++++
2 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 3aa394a..049b3d7 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -157,18 +157,6 @@ int board_early_init_f(void)
int board_init(void)
{
-#ifdef CONFIG_AT91SAM9G20EK_2MMC
- /* arch number of AT91SAM9G20EK_2MMC-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC;
-#else
-#ifdef CONFIG_AT91SAM9G20EK
- /* arch number of AT91SAM9G20EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
-#else
- /* arch number of AT91SAM9260EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK;
-#endif
-#endif
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index ebcc69a..39a8fc2 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -128,6 +128,24 @@
(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
#endif
+/*
+ * The (arm)linux board id set by generic code depending on configured board
+ * (see boards.cfg for different boards)
+ */
+#ifdef CONFIG_AT91SAM9G20
+ /* the sam9g20 variants have two different board ids */
+# ifdef CONFIG_AT91SAM9G20EK_2MMC
+ /* we may be setup for the 2MMC variant of at91sam9g20ek */
+# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC
+# else
+ /* or the normal at91sam9g20ek */
+# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK
+# endif
+#else
+ /* otherwise default to good old at91sam9260ek */
+# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
+#endif
+
/* DataFlash */
#ifndef CONFIG_AT91SAM9G20EK_2MMC
#define CONFIG_ATMEL_DATAFLASH_SPI
--
1.7.10.4
More information about the U-Boot
mailing list