[U-Boot] [PATCH v3 0/9] Bring in new I2C framework

[Dirk Eibach]

Hello Heiko,

Am 04.05.2013 14:01, schrieb Heiko Schocher:
> It seems the timing is coming, to bring this finally in mainline
> and move boards over to the new i2c framework.
> 
> Changes for v3 series:
> 
> - Compiler collects the used i2c adapters in _u_boot_list_i2c,
>   so no need for defining the used i2c adpaters in the board config 
> file.
>   -> drop CONFIG_SYS_NUM_I2C_ADAPTERS and CONFIG_SYS_I2C_ADAPTERS
> - Some adaptions for the keymile boards, so we can drop CONFIG_I2C_MUX
>   completely
> - add ppc4xx_i2c driver, ported from Dirk Eibach
> 
> Serie compiles clean on arm and powerpc
> 
> Ported i2c drivers:
> soft_i2c  : from me, tested on some arm and powerpc boards
> fsl_i2c   : from me, only compile tested
> tegra_i2c : ported from Simon Glass
> ppc4xx_i2c: adapted from Dirk Eibach <dirk.eibach at gdsys.cc>
>             tested on (which board?) with 4 soft_i2c drivers
>             and one ppc4x_i2c driver.

great to see you finally made it.
Testing was done on our iocon platform (which was the reason I started 
the ppc4xx adaption). I will rebase on your patchset and post our ppc4xx 
series again.

Cheers
Dirk