[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
Marek Vasut
marex at denx.de
Wed May 22 15:54:36 CEST 2013
Dear Sergey Yanovich,
> Dear Marek Vasut,
>
> On Wed, 2013-05-22 at 15:04 +0200, Marek Vasut wrote:
> > > Concerning the patch in question, is it possible to allow cache for ram
> > > on PXA270 somehow before we have a final solution?
> >
> > I dont mind discussing this further and even using DCache for stack in
> > board_init_f(), but we must make sure nothing gets broken.
>
> If it is possible, I would like to have a configuration option, which
> allows to use D-Cache as RAM not only on PXA25X, but also on PXA27X. I
> propose to preserve status-quo for now and only use D-Cache as RAM when
> it is explicitly configured so.
See above, let's do it properly please. Check the OneNAND SPL config on vpac270
board, will it still work with this enabled?
> You mentioned in a separate letter, that config options need
> documenting. This part is missing in my patch, and I'll fix this, if the
> above is OK.
Best regards,
Marek Vasut
More information about the U-Boot
mailing list