[U-Boot] [PATCH 1/2 V2] SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
Jagan Teki
jagannadh.teki at gmail.com
Tue May 21 15:10:54 CEST 2013
Hi,
I think this reviewed already, but have a very few comments.
On Wed, Jan 23, 2013 at 12:00 PM, Rajeshwari Shinde
<rajeshwari.s at samsung.com> wrote:
> This patch adds driver for the gigabyte devices
> GD25LQ and GD25Q64B required for Snow Board.
>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> ---
> Changes in V2:
> - Added U-Boot copyright header to gigadevice.c
> - Removed unnecessary blank lines.
> drivers/mtd/spi/Makefile | 1 +
> drivers/mtd/spi/gigadevice.c | 81 ++++++++++++++++++++++++++++++++++
> drivers/mtd/spi/spi_flash.c | 3 +
> drivers/mtd/spi/spi_flash_internal.h | 1 +
> 4 files changed, 86 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mtd/spi/gigadevice.c
>
> diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
> index 90f8392..ecbb210 100644
> --- a/drivers/mtd/spi/Makefile
> +++ b/drivers/mtd/spi/Makefile
> @@ -32,6 +32,7 @@ endif
> COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o
> COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o
> COBJS-$(CONFIG_SPI_FLASH_EON) += eon.o
> +COBJS-$(CONFIG_SPI_FLASH_GIGADEVICE) += gigadevice.o
> COBJS-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.o
> COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o
> COBJS-$(CONFIG_SPI_FLASH_SST) += sst.o
> diff --git a/drivers/mtd/spi/gigadevice.c b/drivers/mtd/spi/gigadevice.c
> new file mode 100644
> index 0000000..b5e1ebe
> --- /dev/null
> +++ b/drivers/mtd/spi/gigadevice.c
> @@ -0,0 +1,81 @@
> +/*
> + * Gigadevice SPI flash driver
> + * Copyright 2013, Samsung Electronics Co., Ltd.
> + * Author: Banajit Goswami <banajit.g at samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <spi_flash.h>
> +
> +#include "spi_flash_internal.h"
> +
> +struct gigadevice_spi_flash_params {
> + uint16_t id;
> + uint16_t nr_blocks;
I think it's better to use u16 instead of uint16_t, uin16_t will get
back to arch include from include/linux which does u16 for directly
for first time.
> + const char *name;
> +};
> +
> +static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = {
> + {
> + .id = 0x6016,
> + .nr_blocks = 64,
> + .name = "GD25LQ",
> + },
> + {
> + .id = 0x4017,
> + .nr_blocks = 128,
> + .name = "GD25Q64B",
> + },
Better to use clean code shape like..
{
.id = 0x60,
.nr_blocks = 64,
.name = "GD25LQ",
}
> +};
> +
> +struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode)
> +{
> + const struct gigadevice_spi_flash_params *params;
> + struct spi_flash *flash;
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) {
> + params = &gigadevice_spi_flash_table[i];
> + if (params->id == ((idcode[1] << 8) | idcode[2]))
> + break;
> + }
> +
> + if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) {
> + debug("SF: Unsupported Gigadevice ID %02x%02x\n",
> + idcode[1], idcode[2]);
> + return NULL;
> + }
> +
> + flash = spi_flash_alloc_base(spi, params->name);
> + if (!flash) {
> + debug("SF: Failed to allocate memory\n");
> + return NULL;
> + }
better to add a space here
> + /* page_size */
> + flash->page_size = 256;
> + /* sector_size = page_size * pages_per_sector */
> + flash->sector_size = flash->page_size * 16;
> + /* size = sector_size * sector_per_block * number of blocks */
> + flash->size = flash->sector_size * 16 * params->nr_blocks;
comments on above size calculations are good, but not that much
important i guess.
And also please provide a stand' link for flash part data sheet on
commit message, if possible.
I thought it's a good to refers don't no this sounds valid..
Thanks,
Jagan.
More information about the U-Boot
mailing list