[U-Boot] [PATCH v3] powerpc/mpc85xx: modify the function clear_bss and the end address of the BSS

[ying.zhang at freescale.com]

From: Ying Zhang <b40530 at freescale.com>

There will clear the BSS in the function clear_bss(), the reset address of
the BSS started from the __bss_start, and increased by four-byte increments,
finally stoped depending on the address is equal to the _bss_end. If the end
address __bss_end is not alignment to 4byte, it will be an infinite loop.

1. The reset action stoped depending on the reset address is greater
than or equal the end address of the BSS.
2. The end address of the BSS should be 4byte aligned. Because the reset unit
is 4 Bytes.

This patch is on top of the patch "powerpc/mpc85xx: support application
without resetvec segment in the linker script".

Signed-off-by: Ying Zhang <b40530 at freescale.com>
---
Compared with the previous version, modified the function clear_bss().

 arch/powerpc/cpu/mpc85xx/start.S        |    2 +-
 arch/powerpc/cpu/mpc85xx/u-boot-spl.lds |    6 ++----
 2 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 3f76ee6..b4c7aa1 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -1794,7 +1794,7 @@ clear_bss:
 	stw	r0,0(r3)
 	addi	r3,r3,4
 	cmplw	0,r3,r4
-	bne	5b
+	blt	5b
 6:
 
 	mr	r3,r9		/* Init Data pointer		*/
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index dff2398..847818a 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -1,8 +1,5 @@
 /*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de
- *
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -98,5 +95,6 @@ SECTIONS
 		*(.sbss*)
 		*(.bss*)
 	}
+	. = ALIGN(4);
 	__bss_end = .;
 }
-- 
1.7.0.4