[U-Boot] [PATCH 01/12] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27

[Benoît Thébaudeau]

In ALT1 mode, EIM_CS2 is GPIO2[27], not ESDHC1.CD. Hence, rename
MX51_PAD_EIM_CS2__SD1_CD to MX51_PAD_EIM_CS2__GPIO2_27.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
---
 arch/arm/include/asm/arch-mx5/iomux-mx51.h |    2 +-
 board/genesi/mx51_efikamx/efikamx.c        |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx5/iomux-mx51.h b/arch/arm/include/asm/arch-mx5/iomux-mx51.h
index 328c188..323e118 100644
--- a/arch/arm/include/asm/arch-mx5/iomux-mx51.h
+++ b/arch/arm/include/asm/arch-mx5/iomux-mx51.h
@@ -61,7 +61,7 @@ enum {
 	MX51_PAD_EIM_A26__USBH2_STP		= IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL),
 	MX51_PAD_EIM_A27__USBH2_NXT		= IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL),
 	MX51_PAD_EIM_CS0__GPIO2_25		= IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
-	MX51_PAD_EIM_CS2__SD1_CD		= IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL),
+	MX51_PAD_EIM_CS2__GPIO2_27		= IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
 	MX51_PAD_EIM_CS3__GPIO2_28		= IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
 	MX51_PAD_EIM_CS4__GPIO2_29		= IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL),
 	MX51_PAD_NANDF_WE_B__PATA_DIOW		= IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL),
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
index 69d41db..13582a2 100644
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ b/board/genesi/mx51_efikamx/efikamx.c
@@ -293,7 +293,7 @@ static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = {
 
 static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = {
 	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_EIM_CS2__SD1_CD,
+	NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, MX51_ESDHC_PAD_CTRL),
 };
 
 #define EFIKAMX_SDHC1_CD	IMX_GPIO_NR(1, 0)
-- 
1.7.10.4