[U-Boot] [PATCH 2/6] mmc: ftsdc010_mci: fix build error if CONFIG_FTSDC010_SDIO is not defined
Kuo-Jung Su
dantesu at gmail.com
Mon May 27 10:05:51 CEST 2013
2013/5/26 Gabor Juhos <juhosg at openwrt.org>:
> The FTSDC010_DCR_FIFO_RST symbol is conditionally
> defined in <faraday/ftsdc010.h> and it is available
> available when CONFIG_FTSDC010_SDIO is enabled.
>
> However the actual driver code unconditionally uses
> the FTSDC010_DCR_FIFO_RST constant and this causes
> build error if CONFIG_FTSDC010_SDIO is not enabled.
>
> The following error happens when compiling for the
> adp-ag101 board:
>
> ftsdc010_mci.c: In function 'ftsdc010_request':
> ftsdc010_mci.c:178: error: 'FTSDC010_DCR_FIFO_RST' undeclared (first use in this function)
> ftsdc010_mci.c:178: error: (Each undeclared identifier is reported only once
> ftsdc010_mci.c:178: error: for each function it appears in.)
>
> The patch ensures that the FTSDC010_DCR_FIFO_RST
> symbol gets used only if CONFIG_FTSDC010_SDIO is
> defined.
>
> Compile tested only.
>
Sorry, it's my bad.
I don't have the NDS32 toolchain, so I didn't run the compiling test
for NDS32 platforms.
> Cc: Kuo-Jung Su <dantesu at faraday-tech.com>
> Cc: Macpaul Lin <macpaul at andestech.com>
> Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
> ---
> drivers/mmc/ftsdc010_mci.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c
> index 562b14a..1fcb97c 100644
> --- a/drivers/mmc/ftsdc010_mci.c
> +++ b/drivers/mmc/ftsdc010_mci.c
> @@ -175,7 +175,11 @@ static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd,
> len = data->blocksize * data->blocks;
>
> /* 1. data disable + fifo reset */
> - writel(FTSDC010_DCR_FIFO_RST, ®s->dcr);
> + dcr = 0;
> +#ifdef CONFIG_FTSDC010_SDIO
> + dcr |= FTSDC010_DCR_FIFO_RST;
> +#endif
> + writel(dcr, ®s->dcr);
>
> /* 2. clear status register */
> writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN
> --
> 1.7.10
>
Reviewed-by: Kuo-Jung Su <dantesu at faraday-tech.com>
--
Best wishes,
Kuo-Jung Su
More information about the U-Boot
mailing list