[U-Boot] [PATCH 2/6] mmc: ftsdc010_mci: fix build error if CONFIG_FTSDC010_SDIO is not defined
Gabor Juhos
juhosg at openwrt.org
Sun May 26 12:11:27 CEST 2013
The FTSDC010_DCR_FIFO_RST symbol is conditionally
defined in <faraday/ftsdc010.h> and it is available
available when CONFIG_FTSDC010_SDIO is enabled.
However the actual driver code unconditionally uses
the FTSDC010_DCR_FIFO_RST constant and this causes
build error if CONFIG_FTSDC010_SDIO is not enabled.
The following error happens when compiling for the
adp-ag101 board:
ftsdc010_mci.c: In function 'ftsdc010_request':
ftsdc010_mci.c:178: error: 'FTSDC010_DCR_FIFO_RST' undeclared (first use in this function)
ftsdc010_mci.c:178: error: (Each undeclared identifier is reported only once
ftsdc010_mci.c:178: error: for each function it appears in.)
The patch ensures that the FTSDC010_DCR_FIFO_RST
symbol gets used only if CONFIG_FTSDC010_SDIO is
defined.
Compile tested only.
Cc: Kuo-Jung Su <dantesu at faraday-tech.com>
Cc: Macpaul Lin <macpaul at andestech.com>
Signed-off-by: Gabor Juhos <juhosg at openwrt.org>
---
drivers/mmc/ftsdc010_mci.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c
index 562b14a..1fcb97c 100644
--- a/drivers/mmc/ftsdc010_mci.c
+++ b/drivers/mmc/ftsdc010_mci.c
@@ -175,7 +175,11 @@ static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd,
len = data->blocksize * data->blocks;
/* 1. data disable + fifo reset */
- writel(FTSDC010_DCR_FIFO_RST, ®s->dcr);
+ dcr = 0;
+#ifdef CONFIG_FTSDC010_SDIO
+ dcr |= FTSDC010_DCR_FIFO_RST;
+#endif
+ writel(dcr, ®s->dcr);
/* 2. clear status register */
writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN
--
1.7.10
More information about the U-Boot
mailing list