[U-Boot] [PATCH v8 2/4] usb: ehci: add weak-aliased function for PORTSC

[Kuo-Jung Su]

From: Kuo-Jung Su <dantesu at faraday-tech.com>

There is at least one non-EHCI compliant controller (i.e. Faraday EHCI)
not only leave RESERVED and CONFIGFLAG registers un-implemented
but also has their address spaces removed.

As an result, the PORTSC register of Faraday EHCI always
starts from 0x30 instead of 0x44 in standard EHCI.

So that we'll need a weak-aliased function for abstraction.

Signed-off-by: Kuo-Jung Su <dantesu at faraday-tech.com>
CC: Marek Vasut <marex at denx.de>
---
Changes for v8:
   - Nothing updates

Changes for v7:
   - Rebase to u-boot-bbd0f7e3ba66d288a2f146f1c7797801e04598ae
   - Drop TDI weak-aliased functions, since there is another similar
     patch had been committed and acceptted.
   - ehci_get_portsc_register(): make sure port is always >= 0

Changes for v6:
   - Simplify weak aliased function declaration
   - Drop redundant line feed

Changes for v5:
   - Split up from Faraday EHCI patch

Changes for v2 - v4:
   - See 'usb: ehci: add Faraday USB 2.0 EHCI support'

 drivers/usb/host/ehci-hcd.c |   23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e0f3e4b..316de15 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -603,6 +603,23 @@ fail:
 	return -1;
 }

+__weak uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
+{
+	/*
+	 * The u-boot would somehow set port=-1 at usb start-up,
+	 * so this quick fix is necessary.
+	 */
+	if (port < 0)
+		port = 0;
+
+	if (port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+		printf("The request port(%u) is not configured\n", port);
+		return NULL;
+	}
+
+	return (uint32_t *)&hcor->or_portsc[port];
+}
+
 int
 ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 		 int length, struct devrequest *req)
@@ -616,11 +633,9 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 	int port = le16_to_cpu(req->index) & 0xff;
 	struct ehci_ctrl *ctrl = dev->controller;

-	if (port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
-		printf("The request port(%d) is not configured\n", port - 1);
+	status_reg = ehci_get_portsc_register(ctrl->hcor, port - 1);
+	if (!status_reg)
 		return -1;
-	}
-	status_reg = (uint32_t *)&ctrl->hcor->or_portsc[port - 1];
 	srclen = 0;

 	debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
--
1.7.9.5