[U-Boot] [PATCH v4 0/4] Factorize ARM relocate_code instances

[Simon Glass]

Hi Albert,

On Mon, May 20, 2013 at 2:26 AM, Albert ARIBAUD
<albert.u.boot at aribaud.net>wrote:

> Hi Benoît,
>
> On Sun, 19 May 2013 17:57:59 +0200 (CEST), Benoît Thébaudeau
> <benoit.thebaudeau at advansee.com> wrote:
>
> > Hi Albert,
> >
> > On Sunday, May 19, 2013 1:48:11 PM, Albert ARIBAUD wrote:
> > > This series replaces all instances of relocate_code in
> > > various start.S files from the ARM architecture with a
> > > single instance in arch/arm/lib/relocate.S.
> > >
> > > This is done in steps, each step keeping the whole of ARM
> > > U-Boot buildable and runnable and touching as little code
> > > as necessary.
> > >
> > > 1. Drop mx31pdk SPL call to relocate_code
> > >
> > > In SPL of mx31pdk, board_init_f calls relocate_code to
> > > move SPL from the NAND read buffer to SRAM. This move
> > > is not a relocation and is thus better implemented as
> > > a simple ad hoc copy loop.
> > >
> > > 2. Drop tx25 SPL call to relocate_code
> > >
> > > Same as mx31pdk.
> > >
> > > 3. Prevent all SPLs from assembling relocate_code
> > >
> > > Now that no SPL uses relocate_code any more, remove
> > > it completely from SPL builds by putting it entirely
> > > between #ifndef CONFIG_SPL_BUILD and #endif preprocessor
> > > conditional.
> > >
> > > 4. Actual factorization of relocate_code
> > >
> > > Remove all instances of relocate_code from start.S and
> > > create a new file, arch/arm/lib/relocate.S, to provide
> > > the new single instance of relocate_code.
> > >
> > > The only non-trivial change is that for PXA25X, a call
> > > to unlock (actually disable) dcache is moved from before
> > > relocating to after relocating. As this cache is either
> > > locked-as-RAM or disabled, but never used as actual DDR
> > > cache, this move has no performance effect on relocation
> > > and no functional impact either.
> > >
> > > The relocation routine was step-tested on versatileqemu
> > > under gdb. Especially, both relocation offset (from
> > > _start to addr_moni and local offsets (from relocate_code
> > > to several linker script symbols) have been verified.
> > >
> > > Changes in v4:
> > > - added blank line after PXA25X conditional code
> > > - fixed typos in relocate_code comments
> > > - brought back 'mov pc,lr' instead of 'bx lr' for ARMv4
> >
> > [...]
> >
> > Perfect!
> >
> > For this v4 series:
> > Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
>
> Thanks Benoît!
>
> Now I need some people to regression-test it on their
> HW, both ARM and non-ARM just in case.
>

Tested on snow (ARMv7) and link (x86), seems fine.

The series:

Tested-by: Simon Glass <sjg at chromium.org>

Re your second series containing 'arm: optimize relocate_code
routine<http://patchwork.ozlabs.org/patch/243817/>',
I ended up with conflicts here - perhaps because the first series was
updated. I would like to test that also, as it should make it possible to
remove CONFIG_SYS_TEXT_BASE which is currently of interest.

Regards,
Simon


>
> > Best regards,
> > Benoît
>
> Amicalement,
> --
> Albert.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>