[U-Boot] [PATCH RFC] OMAP5: uEVM: Enable USB EHCI functionality (preliminary, not tested)

[Lubomir Popov]

Hi Gilles,

On 16/05/13 01:31, Gilles Chanteperdrix wrote:
> On 05/15/2013 05:55 PM, Lubomir Popov wrote:
> 
>> Prerequisites: appropriate patches to the USB EHCI and Eth
>> drivers, and to the OMAP5 clock register definitions. 
> 
> 
> Hi Lubomir,
> 
> I have been trying to get the USB working on omap5 uEVM yesterday. In
> addition to your code, I added the changes necessary to pinmux the 79
> and 80 GPIOS correctly, but it does not seem to work. I suspect there is
> something else missing than simply USB specific bits, because when the
> ethernet phy is supposedly out of reset, the ethernet leds keep turned
> off. I was thinking about checking the PMIC registers.
PMIC wouldn't be related.

Did you pull the current u-boot master and then apply the following patches
before testing? Eager to know ;)

http://patchwork.ozlabs.org/patch/232742/
http://patchwork.ozlabs.org/patch/244100/
> 
> Regards.
> 
Best regards,
Lubo