[U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
trini at ti.com
Fri May 3 15:32:41 CEST 2013
On Thu, May 02, 2013 at 06:15:46PM -0500, Andy Fleming wrote:
> The following changes since commit 63216de13488e8bc81afb53d0f5177142ee34ceb:
>
> omap5_uevm: Enable redundant MMC environment (2013-05-01 16:41:10 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-mpc85xx.git master
>
> for you to fetch changes up to 9e186857c7f99600808b8ecb2fc0fa2adeddebaa:
>
> powerpc/85xx: set USB2 default mode to 'device' for (super)hydra boards (2013-05-02 16:57:34 -0500)
>
> Apologies for the long absense. I got buried in large amounts of work.
> This is not all of the outstanding 85xx patches, but I intend to now switch
> and apply a bunch of my MMC backlog.
>
> ----------------------------------------------------------------
> Cristian Sovaiala (1):
> powerpc/mpc85xx: Changed LIODN offset values
>
> Dongsheng.wang at freescale.com (1):
> powerpc/mpc85xx: add setting of clock-frequency for mpic node
>
> Horst Kronstorfer (1):
> mpc85xx: Fix a compiler warning when CONFIG_WATCHDOG is turned on
>
> Jeffrey Ladouceur (1):
> powerpc/mpc85xx: Add revision properties in portal device tree node 'pme'
>
> Jiang Bin (1):
> board/freescale/common/cds_pci_ft.c: Fix rotate wrong cells in interrupt-map property
>
> Liu Gang (2):
> powerpc/b4: Fix the wrong register offset of B4 PCIE module
> powerpc/b4860qds: Add the tlb entries for SRIO interfaces
>
> Matthew McClintock (1):
> powerpc/p1022ds: Add support for NAND and NAND boot using SPL
>
> Poonam Aggrwal (1):
> doc/ramboot.mpc85xx: Documented the RAMBOOT for MPC85xx
>
> Prabhakar Kushwaha (1):
> powerpc/mpc85xx:IFC Errata A003399 is not valid for BSC913x
>
> Shaohui Xie (1):
> powerpc/85xx: set USB2 default mode to 'device' for (super)hydra boards
>
> Shengzhou Liu (3):
> powerpc/b4860: Adding workaround errata A-005871
> powerpc/p1010rdb: Change flexcan compatible string
> powerpc/p1010rdb: add readme document for p1010rdb
>
> Tang Yuantian (1):
> powerpc/mpc85xx: set clock-frequency for T4/B4 clockgen node
>
> Timur Tabi (1):
> powerpc/85xx: add SerDes bank 4 lanes
>
> Xu Jiucheng (1):
> powerpc/p1_p2_rdb_pc: Add a pin to reset the DDR chip for P1021RDB-PC
>
> Xulei (1):
> powerpc/85xx: Add workaround for errata USB-14 (enable on P204x/P3041/P50x0)
>
> York Sun (1):
> powerpc/mpc85xx: Extend workaround for erratum DDR_A003 to other SoCs
>
> Zang Roy-R61911 (1):
> fman/mEMAC: set SETSP bit in IF_MODE regisgter for RGMII speed
>
> Zhicheng Fan (1):
> qoriq/p1_p2_rdb_pc: USB device-tree fixups for P1020
>
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +
> arch/powerpc/cpu/mpc85xx/cpu.c | 18 ++-
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 14 ++
> arch/powerpc/cpu/mpc85xx/fdt.c | 7 +
> arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 4 +
> arch/powerpc/cpu/mpc85xx/p2041_ids.c | 20 +--
> arch/powerpc/cpu/mpc85xx/p3041_ids.c | 20 +--
> arch/powerpc/cpu/mpc85xx/p5020_ids.c | 20 +--
> arch/powerpc/cpu/mpc85xx/portals.c | 20 ++-
> arch/powerpc/include/asm/config_mpc85xx.h | 12 +-
> arch/powerpc/include/asm/fsl_memac.h | 4 +
> arch/powerpc/include/asm/immap_85xx.h | 12 +-
> board/freescale/b4860qds/tlb.c | 19 ++-
> board/freescale/common/Makefile | 6 +
> board/freescale/common/cds_pci_ft.c | 26 +++-
> board/freescale/p1010rdb/p1010rdb.c | 2 +-
> board/freescale/p1022ds/Makefile | 14 ++
> board/freescale/p1022ds/law.c | 1 +
> board/freescale/p1022ds/spl_minimal.c | 129 ++++++++++++++++
> board/freescale/p1022ds/tlb.c | 20 ++-
> board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 66 +++++++-
> board/freescale/p1_p2_rdb_pc/spl_minimal.c | 15 ++
> boards.cfg | 2 +
> doc/README.p1010rdb | 199 +++++++++++++++++++++++++
> doc/README.ramboot-ppc85xx | 102 +++++++++++++
> drivers/net/fm/memac.c | 17 +++
> include/configs/P1022DS.h | 132 ++++++++++++++--
> include/configs/corenet_ds.h | 1 +
> 28 files changed, 833 insertions(+), 72 deletions(-)
> create mode 100644 board/freescale/p1022ds/spl_minimal.c
> create mode 100644 doc/README.p1010rdb
> create mode 100644 doc/README.ramboot-ppc85xx
With the patch I just sent to fix P1022DS as well, applied to
u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130503/0cfceab3/attachment.pgp>
More information about the U-Boot
mailing list