[U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Tue May 7 09:55:08 CEST 2013
Hi Albert,
please pull from u-boot-imx, thanks !
The following changes since commit f2e8a87305a55652488af140adcf65b1e688f287:
exynos: fdt: Add TMU node for snow (2013-04-17 10:00:44 +0900)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to d782c1fe7246301143ed78c0d86ea6c81f9325f9:
arm: mxs: video: Enable MXS LCDIF on M28EVK (2013-05-06 17:40:23 +0200)
----------------------------------------------------------------
Benoît Thébaudeau (40):
imx: Homogenize and fix fuse register definitions
imx: Add useful fuse definitions
Add fuse API and commands
Add fsl_iim driver
mpc: iim: Switch to common fsl_iim
mx51evk: Enable support for iim
Add mxc_ocotp driver
mx6qsabrelite: Enable support for ocotp
nitrogen6x: Enable support for ocotp
imx: Document fuse assignments for MAC addresses
imx: iomux-v3: Fix common pad control definitions
imx: iomux-v3: cosmetic: Reorganize definitions
imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro
imx: iomux-v3: Include PKE and PUE to pad control pull definitions
imx: iomux-v3: Add iomux-mx25.h
imx: mx25pdk: Convert to iomux-v3
imx: mx25pdk: Fix GPIO assignments
imx: tx25: Convert to iomux-v3
imx: zmx25: Convert to iomux-v3
imx: mx25: Remove legacy iomux support
imx: iomux-v3: Add iomux-mx35.h
imx: flea3: Convert to iomux-v3
imx: mx35pdk: Fix WDOG_RST iomux function
imx: mx35pdk: Convert to iomux-v3
imx: woodburn: Convert to iomux-v3
imx: mx35: Remove legacy iomux support
imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
imx: iomux-v3: Add missing definitions to iomux-mx51.h
imx: mx51evk: Convert to iomux-v3
imx: mx51_efikamx/sb: Convert to iomux-v3
imx: vision2: Convert to iomux-v3
imx: iomux-v3: Add iomux-mx53.h
imx: ima3-mx53: Convert to iomux-v3
imx: mx53ard: Convert to iomux-v3
imx: mx53evk: Convert to iomux-v3
imx: mx53loco: Convert to iomux-v3
imx: mx53smd: Convert to iomux-v3
imx: m53evk: Convert to iomux-v3
imx: mx5: Remove legacy iomux support
imx: mx35pdk: Fix MUX2_CTR GPIO
Eric Benard (1):
mx28evk: add trimffs to nand command
Fabio Estevam (22):
iomux-v3: Place pad control definitions into common file
mx6: Add solo-lite variant support
mx6sl: Add initial support for mx6slevk board
imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
nitrogen6x: Setup CCM_CCOSR register
mx51evk: Update environment in order to allow booting a dt kernel
mx51evk: Do not force the rootfs type
mx5: Define a common get_board_rev()
mx5: Select CONFIG_REVISION_TAG
mx53ard: Move register masks into imx-regs.h
mx23: Put back RAM voltage level to its original value
mx23: Fix pad voltage selection bit
mx23evk: Fix DDR pin iomux settings
mx23_olinuxino: Fix DDR pin iomux settings
mxs: spl_mem_init: Fix comment about start bit
mxs: spl_mem_init: Remove erroneous DDR setting
mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
mxs: spl_mem_init: Change EMI port priority
mx23: Operate DDR voltage supply at 2.5V
mx23evk: Do not set voltage selection bit for SSP pads
mx23_olinuxino: Do not set voltage selection bit for SSP pads
mxs: Explain why some mx23 DDR registers are not configured
Marek Vasut (13):
tools: arm: imx: Implement BOOT_OFFSET command for imximage
imx: Align the imximage header and payload to multiples of 4k
nand: Add SPL_NAND support to mxc_nand_spl
arm: imx: Pack u-boot.bin into uImage for SPL
arm: mx5: Add SPL support code to MX5
arm: mx5: Add NAND clock handling
arm: mx5: Add support for DENX M53EVK
arm: mx23: Fix VDDMEM misconfiguration
arm: mxs: Preprocess u-boot.bd so they contain full path
arm: mxs: Add LCDIF clock configuration function
arm: mxs: Add LCDIF registers for i.MX233
arm: mxs: Add MXS LCDIF driver
arm: mxs: video: Enable MXS LCDIF on M28EVK
Otavio Salvador (9):
mx6qsabre{sd, auto}: Add update_sd_firmware support
mx6qsabresd: Return status when initializing MMC
wandboard: Use env storage info for mmcdev/mmcpart
wandboard: Add update_sd_firmware support
wandboard: Add card detection for SOM MicroSD card
wandboard: Add support for Carrier Board MicroSD card
wandboard: Add boot selection support
mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
mx53ard: Rework default environment to support FDT, MMC and netboot
Philip Paeps (2):
mx35 iomux: correct offsets of IOMUX registers
mx35 iomux: correct input select register index
Shawn Guo (1):
ARM: mx6: define CONFIG_ARM_ERRATA_742230
Stefan Roese (7):
arm: imx: Change iomux functions to void type
imx: Move some header files from arch-mxs to imx-common
imx: Move some i.MX common functions into the imx-common directory
dma: Add i.MX6 support to drivers/dma/apbh_dma.c
mtd: mxs_nand: Add support for i.MX6
imx: Add titanium board support (i.MX6 based)
arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.h
Stefano Babic (1):
Merge branch 'next'
.gitignore | 1 +
MAINTAINERS | 4 +
Makefile | 9 +-
README | 1 +
arch/arm/cpu/arm1136/mx35/Makefile | 1 -
arch/arm/cpu/arm1136/mx35/iomux.c | 114 --
arch/arm/cpu/arm926ejs/mx25/generic.c | 117 --
arch/arm/cpu/arm926ejs/mxs/Makefile | 10 +
arch/arm/cpu/arm926ejs/mxs/clock.c | 93 ++
arch/arm/cpu/arm926ejs/mxs/mxs.c | 65 +-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 46 +-
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 50 +-
arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 4 +-
arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 4 +-
arch/arm/cpu/armv7/mx5/Makefile | 2 +-
arch/arm/cpu/armv7/mx5/clock.c | 14 +-
arch/arm/cpu/armv7/mx5/iomux.c | 186 ---
arch/arm/cpu/armv7/mx5/soc.c | 7 +
arch/arm/cpu/armv7/mx6/clock.c | 52 +-
arch/arm/cpu/armv7/mx6/soc.c | 11 +-
arch/arm/imx-common/Makefile | 22 +-
arch/arm/imx-common/iomux-v3.c | 18 +-
arch/arm/imx-common/misc.c | 84 ++
arch/arm/include/asm/arch-mx25/imx-regs.h | 21 +-
arch/arm/include/asm/arch-mx25/imx25-pinmux.h | 421 -------
arch/arm/include/asm/arch-mx25/iomux-mx25.h | 545 +++++++++
arch/arm/include/asm/arch-mx27/imx-regs.h | 3 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 22 +-
arch/arm/include/asm/arch-mx35/imx-regs.h | 19 +-
arch/arm/include/asm/arch-mx35/iomux-mx35.h | 1276
++++++++++++++++++++
arch/arm/include/asm/arch-mx35/iomux.h | 295 -----
arch/arm/include/asm/arch-mx35/mx35_pins.h | 353 ------
arch/arm/include/asm/arch-mx5/clock.h | 1 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 24 +-
arch/arm/include/asm/arch-mx5/iomux-mx51.h | 180 ++-
arch/arm/include/asm/arch-mx5/iomux-mx53.h | 1232
+++++++++++++++++++
arch/arm/include/asm/arch-mx5/iomux.h | 91 --
arch/arm/include/asm/arch-mx5/mx5x_pins.h | 879 --------------
arch/arm/include/asm/arch-mx5/spl.h | 19 +
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/crm_regs.h | 183 +--
arch/arm/include/asm/arch-mx6/imx-regs.h | 96 +-
arch/arm/include/asm/arch-mx6/mx6-pins.h | 4 +
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 35 +-
arch/arm/include/asm/arch-mx6/mx6q_pins.h | 27 -
arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 25 +
arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +
arch/arm/include/asm/arch-mxs/clock.h | 1 +
arch/arm/include/asm/arch-mxs/imx-regs.h | 6 +-
arch/arm/include/asm/arch-mxs/iomux.h | 4 +
arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-digctl.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-i2c.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-lcdif.h | 38 +-
arch/arm/include/asm/arch-mxs/regs-lradc.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-ocotp.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-pinctrl.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-power-mx23.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-power-mx28.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-rtc.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-ssp.h | 2 +-
arch/arm/include/asm/arch-mxs/regs-timrot.h | 2 +-
.../arm/include/asm/{arch-mxs => imx-common}/dma.h | 12 +
arch/arm/include/asm/imx-common/imximage.cfg | 30 +
arch/arm/include/asm/imx-common/iomux-v3.h | 69 +-
.../asm/{arch-mxs => imx-common}/regs-apbh.h | 19 +-
.../asm/{arch-mxs => imx-common}/regs-bch.h | 12 +-
.../asm/{arch-mxs => imx-common}/regs-common.h | 0
.../asm/{arch-mxs => imx-common}/regs-gpmi.h | 2 +-
arch/powerpc/cpu/mpc512x/Makefile | 1 -
arch/powerpc/cpu/mpc512x/cpu_init.c | 2 +-
arch/powerpc/cpu/mpc512x/iim.c | 394 ------
arch/powerpc/include/asm/immap_512x.h | 2 +
board/CarMediaLab/flea3/flea3.c | 91 +-
board/boundary/nitrogen6x/clocks.cfg | 11 +
board/boundary/nitrogen6x/nitrogen6x.c | 42 +-
board/denx/m53evk/Makefile | 40 +
board/denx/m53evk/imximage.cfg | 108 ++
board/denx/m53evk/m53evk.c | 328 +++++
board/esg/ima3-mx53/ima3-mx53.c | 228 ++--
board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 11 +
board/freescale/mx23evk/spl_boot.c | 4 +-
board/freescale/mx25pdk/mx25pdk.c | 132 +-
board/freescale/mx35pdk/mx35pdk.c | 175 ++-
board/freescale/mx51evk/mx51evk.c | 348 ++----
board/freescale/mx51evk/mx51evk_video.c | 22 +-
board/freescale/mx53ard/mx53ard.c | 329 +++--
board/freescale/mx53evk/mx53evk.c | 289 ++---
board/freescale/mx53loco/mx53loco.c | 268 ++--
board/freescale/mx53loco/mx53loco_video.c | 68 +-
board/freescale/mx53smd/mx53smd.c | 152 +--
board/freescale/mx6qarm2/mx6qarm2.c | 17 +-
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 22 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 30 +-
board/freescale/mx6qsabresd/mx6qsabresd.c | 30 +-
board/freescale/mx6slevk/Makefile | 28 +
board/freescale/mx6slevk/imximage.cfg | 118 ++
board/freescale/mx6slevk/mx6slevk.c | 102 ++
board/freescale/titanium/Makefile | 36 +
board/freescale/titanium/imximage.cfg | 178 +++
board/freescale/titanium/titanium.c | 334 +++++
board/genesi/mx51_efikamx/efikamx-usb.c | 122 +-
board/genesi/mx51_efikamx/efikamx.c | 2 +-
board/karo/tx25/tx25.c | 107 +-
board/olimex/mx23_olinuxino/spl_boot.c | 4 +-
board/syteco/zmx25/zmx25.c | 143 +--
board/ttcontrol/vision2/vision2.c | 585 ++++-----
board/wandboard/wandboard.c | 113 +-
board/woodburn/woodburn.c | 69 +-
boards.cfg | 3 +
common/Makefile | 1 +
common/cmd_fuse.c | 168 +++
doc/README.fsl_iim | 48 +
doc/README.fuse | 67 +
doc/README.imx25 | 10 +
doc/README.imx27 | 10 +
doc/README.imx5 | 6 +
doc/README.imx6 | 10 +
doc/README.imximage | 18 +
doc/README.mxc_ocotp | 50 +
drivers/dma/apbh_dma.c | 5 +-
drivers/misc/Makefile | 2 +
drivers/misc/fsl_iim.c | 286 +++++
drivers/misc/mxc_ocotp.c | 216 ++++
drivers/mmc/mxsmmc.c | 2 +-
drivers/mtd/nand/mxc_nand_spl.c | 13 +-
drivers/mtd/nand/mxs_nand.c | 15 +-
drivers/spi/mxs_spi.c | 2 +-
drivers/usb/host/ehci-mx5.c | 73 --
drivers/video/Makefile | 1 +
drivers/video/cfb_console.c | 4 +
drivers/video/mxsfb.c | 189 +++
include/config_cmd_all.h | 1 +
include/configs/ac14xx.h | 5 +
include/configs/aria.h | 2 +-
include/configs/ima3-mx53.h | 3 -
include/configs/m28evk.h | 19 +
include/configs/m53evk.h | 256 ++++
include/configs/mecp5123.h | 2 +-
include/configs/mpc5121ads.h | 2 +-
include/configs/mx28evk.h | 1 +
include/configs/mx51evk.h | 51 +-
include/configs/mx53ard.h | 102 +-
include/configs/mx53evk.h | 1 +
include/configs/mx53smd.h | 1 +
include/configs/mx6_common.h | 1 +
include/configs/mx6qsabre_common.h | 14 +
include/configs/mx6qsabrelite.h | 5 +
include/configs/mx6slevk.h | 189 +++
include/configs/nitrogen6x.h | 5 +
include/configs/pdm360ng.h | 7 +
include/configs/titanium.h | 277 +++++
include/configs/wandboard.h | 24 +-
.../asm/arch-mx25/sys_proto.h => include/fuse.h | 30 +-
include/usb/ehci-fsl.h | 6 -
spl/Makefile | 8 +
tools/imximage.c | 17 +-
tools/imximage.h | 9 +-
tools/mxsboot.c | 8 +-
160 files changed, 8884 insertions(+), 5340 deletions(-)
delete mode 100644 arch/arm/cpu/arm1136/mx35/iomux.c
delete mode 100644 arch/arm/cpu/armv7/mx5/iomux.c
create mode 100644 arch/arm/imx-common/misc.c
delete mode 100644 arch/arm/include/asm/arch-mx25/imx25-pinmux.h
create mode 100644 arch/arm/include/asm/arch-mx25/iomux-mx25.h
create mode 100644 arch/arm/include/asm/arch-mx35/iomux-mx35.h
delete mode 100644 arch/arm/include/asm/arch-mx35/iomux.h
delete mode 100644 arch/arm/include/asm/arch-mx35/mx35_pins.h
create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx53.h
delete mode 100644 arch/arm/include/asm/arch-mx5/iomux.h
delete mode 100644 arch/arm/include/asm/arch-mx5/mx5x_pins.h
create mode 100644 arch/arm/include/asm/arch-mx5/spl.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6sl_pins.h
rename arch/arm/include/asm/{arch-mxs => imx-common}/dma.h (93%)
create mode 100644 arch/arm/include/asm/imx-common/imximage.cfg
rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-apbh.h (97%)
rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-bch.h (96%)
rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-common.h (100%)
rename arch/arm/include/asm/{arch-mxs => imx-common}/regs-gpmi.h (99%)
delete mode 100644 arch/powerpc/cpu/mpc512x/iim.c
create mode 100644 board/denx/m53evk/Makefile
create mode 100644 board/denx/m53evk/imximage.cfg
create mode 100644 board/denx/m53evk/m53evk.c
create mode 100644 board/freescale/mx6slevk/Makefile
create mode 100644 board/freescale/mx6slevk/imximage.cfg
create mode 100644 board/freescale/mx6slevk/mx6slevk.c
create mode 100644 board/freescale/titanium/Makefile
create mode 100644 board/freescale/titanium/imximage.cfg
create mode 100644 board/freescale/titanium/titanium.c
create mode 100644 common/cmd_fuse.c
create mode 100644 doc/README.fsl_iim
create mode 100644 doc/README.fuse
create mode 100644 doc/README.imx25
create mode 100644 doc/README.imx27
create mode 100644 doc/README.imx6
create mode 100644 doc/README.mxc_ocotp
create mode 100644 drivers/misc/fsl_iim.c
create mode 100644 drivers/misc/mxc_ocotp.c
create mode 100644 drivers/video/mxsfb.c
create mode 100644 include/configs/m53evk.h
create mode 100644 include/configs/mx6slevk.h
create mode 100644 include/configs/titanium.h
rename arch/arm/include/asm/arch-mx25/sys_proto.h => include/fuse.h (55%)
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list