[ELDK] How to make network alive

J.H.Kim frog1120 at gmail.com
Wed Oct 28 10:24:21 CET 2009

Hi, everyone

I made jffs2 root file system, which is from ELDK4.2 ramdisk image, as
ELDK manual shows.
I installed the image in my board (AT91SAM9260).
After kernel is booted, the prompt appears.
But network device eth0 is not set.

I added my eth0 setting in /etc/network/interfaces file.
But result was same. when I do "ifconfig", only local loopback device appears.

How can I set eth0 alive in ELDK root filesystem?

Thanks in advane

Best Regards,
J.Hwan Kim

More information about the eldk mailing list