June 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jun 1 14:04:01 CEST 2025
Ending: Sun Jun 15 13:05:54 CEST 2025
Messages: 1151

• [PATCH 1/2] doc: efi_loader: Tidy up the bootefi-command docs   Simon Glass
  • [PATCH 1/2] doc: efi_loader: Tidy up the bootefi-command docs   Simon Glass
  • [PATCH 1/2] doc: efi_loader: Tidy up the bootefi-command docs   Heinrich Schuchardt
• [GIT PULL] Please pull u-boot-imx-next-20250601   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-next-20250601   Tom Rini
• [PATCH 01/13] configs: imx8m*_venice: enable several commands useful for scripting   Fabio Estevam
• [PATCH v3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2B board   Fabio Estevam
• [PATCH v4 1/4] clk: imx: add i.MX6UL clk driver   Fabio Estevam
• Please pull u-boot-dm into -next   Tom Rini
• Determining Simon Glass's future in the U-Boot project   Tom Rini
  • Determining Simon Glass's future in the U-Boot project   Casey Connolly
    • Determining Simon Glass's future in the U-Boot project   Casey Connolly
  • Determining Simon Glass's future in the U-Boot project   neil.armstrong at linaro.org
• [PATCH 0/6] Various V3/S3/V3s fixes and improvements   Paul Kocialkowski
  • [PATCH 1/6] sunxi: Kconfig: Fix default order for V3s DRAM clock   Paul Kocialkowski
    • [PATCH 1/6] sunxi: Kconfig: Fix default order for V3s DRAM clock   Andre Przywara
  • [PATCH 2/6] sunxi: Add support for the Lichee Pi Zero with Dock   Paul Kocialkowski
    • [PATCH 2/6] sunxi: Add support for the Lichee Pi Zero with Dock   Andre Przywara
      • [PATCH 2/6] sunxi: Add support for the Lichee Pi Zero with Dock   Paul Kocialkowski
  • [PATCH 3/6] sunxi: Split V3/S3 support from V3s   Paul Kocialkowski
  • [PATCH 4/6] sunxi: pinecube: Enable EMAC and network support   Paul Kocialkowski
    • [PATCH 4/6] sunxi: pinecube: Enable EMAC and network support   Andre Przywara
  • [PATCH 5/6] power: axp: Fixup default voltages for V3/S3   Paul Kocialkowski
  • [PATCH 6/6] net: sun8i-emac: Add support for active-low leds with internal PHY   Paul Kocialkowski
    • [PATCH 6/6] net: sun8i-emac: Add support for active-low leds with internal PHY   Andre Przywara
      • [PATCH 6/6] net: sun8i-emac: Add support for active-low leds with internal PHY   Paul Kocialkowski
• [PATCH v2 1/5] net: lwip: call sys_check_timeouts and schedule on rx   Heinrich Schuchardt
  • [PATCH v2 1/5] net: lwip: call sys_check_timeouts and schedule on rx   Tim Harvey
    • [PATCH v2 1/5] net: lwip: call sys_check_timeouts and schedule on rx   Tim Harvey
• [PATCH v2 2/5] net: lwip: enable IP_FRAG and IP_REASSEMBLY   Heinrich Schuchardt
• [PATCH v4 1/5] disk: part: implement generic function part_get_info_by_uuid()   Heinrich Schuchardt
• [PATCH 1/1] bootstage: Fix typo   Aristo Chen
  • [PATCH 1/1] bootstage: Fix typo   Tom Rini
• [PATCH] clk: versal: Fix clock driver dependency   Michal Simek
• [PATCH] gpio: zynq: Read using DATA register when direction is output   Michal Simek
• [PATCH v4 0/8] usb: dwc2: Refactor and update USB DWC2 driver   Mattijs Korpershoek
• [PATCH] usb: dwc2: Refactor register operations with clrsetbits macros   Mattijs Korpershoek
• [PATCH] Revert "booti/bootm: riscv: Verify image arch type"   Leo Liang
  • [PATCH] Revert "booti/bootm: riscv: Verify image arch type"   Quentin Schulz
• [PATCH] Revert "riscv: Select appropriate image type"   Leo Liang
• [PATCH 0/3] sntp for NET_LWIP   Jerome Forissier
  • [PATCH 0/3] sntp for NET_LWIP   E Shattow
    • [PATCH 0/3] sntp for NET_LWIP   Heinrich Schuchardt
      • [PATCH 0/3] sntp for NET_LWIP   Tom Rini
• [PATCH] Revert "riscv: image: Add new image type for RV64"   Leo Liang
• [PULL] u-boot-riscv/master   Leo Liang
  • [PULL] u-boot-riscv/master   Tom Rini
• [PATCH 1/1] configs: raise SPL_SYS_MALLOC_SIZE to 8 MiB on RISC-V   Leo Liang
  • [PATCH 1/1] configs: raise SPL_SYS_MALLOC_SIZE to 8 MiB on RISC-V   牛 志宏
• [PATCH] MAINTAINERS: riscv: cpu: th1520: Assign myself as maintainer   Leo Liang
• [PATCH v1 3/4] configs: beaglev_fire: Enable GPIO and MMC_SPI   Leo Liang
• [PATCH v2 1/2] gpio: add PolarFire SoC GPIO and Core GPIO driver   Leo Liang
• [PATCH v2 2/2] spi: coreqspi: add xfer function for PolarFire SoC   Leo Liang
• [PATCH] ram: Move Kconfig options into their own menu entry   Yao Zi
  • [PATCH] ram: Move Kconfig options into their own menu entry   Quentin Schulz
  • [PATCH] ram: Move Kconfig options into their own menu entry   Tom Rini
  • [PATCH] ram: Move Kconfig options into their own menu entry   Tom Rini
• [PATCH 1/5] riscv: cpu: th1520: Build spl.c for SPL only   Leo Liang
• aarch64 u-boot reset loop with qemu USB and KVM   Mikko Rapeli
  • aarch64 u-boot reset loop with qemu USB and KVM   Mikko Rapeli
    • aarch64 u-boot reset loop with qemu USB and KVM   Ilias Apalodimas
• [PATCH 0/2] arm: armv7: fix a bug that prevents CONFIG_BLOBLIST and CONFIG_POSITION_INDEPENDENT to be enabled together   Quentin Schulz
  • [PATCH 0/2] arm: armv7: fix a bug that prevents CONFIG_BLOBLIST and CONFIG_POSITION_INDEPENDENT to be enabled together   Mikko Rapeli
  • [PATCH 0/2] arm: armv7: fix a bug that prevents CONFIG_BLOBLIST and CONFIG_POSITION_INDEPENDENT to be enabled together   Yang Xiwen
  • [PATCH 0/2] arm: armv7: fix a bug that prevents CONFIG_BLOBLIST and CONFIG_POSITION_INDEPENDENT to be enabled together   Tom Rini
• [PATCH] board: sama5d27_wlsom1_ek: Get RAM size and base from devicetree   Eugen Hristev
• [PATCH 2/5] riscv: cpu: th1520: Support cache enabling/disabling in M mode only   Leo Liang
• [PATCH v2 1/2] spl: Add size check for u-boot-with-spl.bin   Philip Oberfichtner
  • [PATCH v2 1/2] spl: Add size check for u-boot-with-spl.bin   Tom Rini
• [PATCH v2 0/2] bootstd: New bootmeth for RAUC A/B systems   Martin Schwan
  • [PATCH v2 1/2] bootstd: Add implementation for bootmeth rauc   Martin Schwan
    • [PATCH v2 1/2] bootstd: Add implementation for bootmeth rauc   Wadim Egorov
  • [PATCH v2 2/2] doc: Add description for bootmeth rauc   Martin Schwan
• [RFC PATCH v1] mach-k3: mmu: add dynamic carveouts for MMU table   Anshul Dalal
• [PATCH] atmel: Remove local <dt-bindings/pinctrl/at91.h>   Eugen Hristev
  • [PATCH] atmel: Remove local <dt-bindings/pinctrl/at91.h>   Tom Rini
    • [PATCH] atmel: Remove local <dt-bindings/pinctrl/at91.h>   Eugen Hristev
      • [PATCH] atmel: Remove local <dt-bindings/pinctrl/at91.h>   Mihai.Sain at microchip.com
      • [PATCH] atmel: Remove local <dt-bindings/pinctrl/at91.h>   Eugen Hristev
• [PATCH v2 0/5] Create FPGA Partial Reconfiguration (fpga pr) command   Alexander Dahl
  • [PATCH v2 0/5] Create FPGA Partial Reconfiguration (fpga pr) command   Ravulapalli, Naresh Kumar
• Please pull u-boot-i2c master   Heiko Schocher
  • Please pull u-boot-i2c master   Tom Rini
• [PATCH v2 0/3] Restore support of short name for type UUID parameter   Patrick DELAUNAY
• [PATCH v3 0/3] Restore support of short name for type UUID parameter   Patrick Delaunay
  • [PATCH v3 1/3] lib/uuid.c: restore support of system partition type for ESP   Patrick Delaunay
  • [PATCH v3 0/3] Restore support of short name for type UUID parameter   Tom Rini
• [PATCH v3 2/3] doc: cmd: gpt: add information on type partition   Patrick Delaunay
• [PATCH v3 3/3] test/py: tests: gpt: add test_gpt_write_part_type   Patrick Delaunay
• [GIT PULL] Please pull u-boot-dfu-next-20250602 into next   Mattijs Korpershoek
  • [GIT PULL] Please pull u-boot-dfu-next-20250602 into next   Tom Rini
• [PATCH] ARM: imx: mxs: Add support for imx287 based BTT devices   Tom Rini
• [PATCH v2 0/4] Add IPC support on MCU R5F cluster in Split Mode   Beleswar Padhi
  • [PATCH v2 1/4] arm: mach-k3: {am6/j7}*_hardware.h: Expose MCU R5 proc and device ids   Beleswar Padhi
  • [PATCH v2 2/4] arch: mach-k3: common: Add support to shutdown MCU R5 Core 1   Beleswar Padhi
    • [PATCH v2 2/4] arch: mach-k3: common: Add support to shutdown MCU R5 Core 1   Hari Nagalla
      • [PATCH v2 2/4] arch: mach-k3: common: Add support to shutdown MCU R5 Core 1   Beleswar Prasad Padhi
  • [PATCH v2 3/4] remoteproc: k3-r5: Acquire processor control before reset ops   Beleswar Padhi
  • [PATCH v2 4/4] board: ti: j7*: Add firmware for MCU R5 core1   Beleswar Padhi
• [PATCH 0/2] Binman: fix signing an encrypted FIT with a   yan wang
  • [PATCH 1/2] tools: binman: Test signing an encrypted FIT with a preload header   yan wang
  • [PATCH 2/2] binman: Fix signing an encryted FIT with a preload key   yan wang
• [PATCH] usb: gadget: atmel: reliably generate disconnect by disabling controller instead of toggling PULLD_DIS   Zixun LI
  • [PATCH] usb: gadget: atmel: reliably generate disconnect by disabling controller instead of toggling PULLD_DIS   Mattijs Korpershoek
    • [PATCH] usb: gadget: atmel: reliably generate disconnect by disabling controller instead of toggling PULLD_DIS   Eugen Hristev
      • [PATCH] usb: gadget: atmel: reliably generate disconnect by disabling controller instead of toggling PULLD_DIS   Zixun LI
      • [PATCH] usb: gadget: atmel: reliably generate disconnect by disabling controller instead of toggling PULLD_DIS   Mattijs Korpershoek
      • [PATCH] usb: gadget: atmel: reliably generate disconnect by disabling controller instead of toggling PULLD_DIS   Zixun LI
• [PATCH v2 0/7] Qualcomm: teach the build system to emit signed ELF images   Casey Connolly
  • [PATCH v2 1/7] binman: add $(srctree)/tools to toolpath   Casey Connolly
  • [PATCH v2 2/7] binman: support building binman dtb when OF_UPSTREAM is enabled   Casey Connolly
  • [PATCH v2 3/7] tools: add mkmbn tool for Qualcomm   Casey Connolly
    • [PATCH v2 3/7] tools: add mkmbn tool for Qualcomm   Stephan Gerhold
      • [PATCH v2 3/7] tools: add mkmbn tool for Qualcomm   Casey Connolly
  • [PATCH v2 4/7] binman: add support for building Qualcomm signed MBN ELF images   Casey Connolly
  • [PATCH v2 5/7] configs: qualcomm: use fragments for debug UART   Casey Connolly
  • [PATCH v2 6/7] configs: qualcomm: use mkmbn and stop creating ELF files   Casey Connolly
    • [PATCH v2 6/7] configs: qualcomm: use mkmbn and stop creating ELF files   Stephan Gerhold
      • [PATCH v2 6/7] configs: qualcomm: use mkmbn and stop creating ELF files   Casey Connolly
  • [PATCH v2 7/7] doc: board/qualcomm: update docs for new u-boot.mbn target   Casey Connolly
  • [PATCH v2 0/7] Qualcomm: teach the build system to emit signed ELF images   Stephan Gerhold
    • [PATCH v2 0/7] Qualcomm: teach the build system to emit signed ELF images   Casey Connolly
• [PATCH] rtc: add ds1672 driver   Tim Harvey
• [PATCH tiU2025.01 0/2] binman: openssl: x509 entry cleanups   Bryan Brattlof
  • [PATCH tiU2025.01 1/2] binman: openssl: remove unused encryption extension   Bryan Brattlof
    • [PATCH tiU2025.01 1/2] binman: openssl: remove unused encryption extension   Andrew Davis
      • [PATCH tiU2025.01 1/2] binman: openssl: remove unused encryption extension   Bryan Brattlof
  • [PATCH tiU2025.01 2/2] binman: openssl: disable JTAG access by default   Bryan Brattlof
    • [PATCH tiU2025.01 2/2] binman: openssl: disable JTAG access by default   Andrew Davis
      • [PATCH tiU2025.01 2/2] binman: openssl: disable JTAG access by default   Andrew Davis
      • [PATCH tiU2025.01 2/2] binman: openssl: disable JTAG access by default   Bryan Brattlof
• [PATCH] doc: build: fix typo in gcc.rst   Heinrich Schuchardt
  • [PATCH] doc: build: fix typo in gcc.rst   Behrad Elmi
• [PATCH 00/10] sc5xx: Add complete board support for all ADI SC5xx boards   Greg Malysa
  • [PATCH 01/10] mach-sc5xx: Introduce Kconfig symbols for image addresses   Greg Malysa
  • [PATCH 02/10] mach-sc5xx: Add binman support   Greg Malysa
  • [PATCH 03/10] docker: add ADI build-related tools to docker image   Greg Malysa
    • [PATCH 03/10] docker: add ADI build-related tools to docker image   Heinrich Schuchardt
      • [PATCH 03/10] docker: add ADI build-related tools to docker image   Greg Malysa
  • [PATCH 04/10] board: adi: Add SOMCRR infrastructure   Greg Malysa
  • [PATCH 05/10] board: adi: Add support for SC573-ezkit   Greg Malysa
  • [PATCH 06/10] board: adi: Add support for SC589 boards   Greg Malysa
  • [PATCH 07/10] board: adi: Add support for SC584   Greg Malysa
  • [PATCH 08/10] board: adi: Add support for SC598   Greg Malysa
  • [PATCH 09/10] board: adi: Add support for SC594   Greg Malysa
  • [PATCH 10/10] MAINTAINERS: Update ADI entries for new boards   Greg Malysa
    • [PATCH 10/10] MAINTAINERS: Update ADI entries for new boards   Tom Rini
• [PATCH] cmd: smbios: Fix header for type 3 entries   Mark Kettenis
  • [PATCH] cmd: smbios: Fix header for type 3 entries   Heinrich Schuchardt
• Re: [PATCH 1/3] net: extract function net_sntp_set_rtc() from sntp_handler()   Heinrich Schuchardt
  • [PATCH 1/3] net: extract function net_sntp_set_rtc() from sntp_handler()   Tom Rini
• [PATCH 2/3] net: lwip: add sntp command   Heinrich Schuchardt
  • [PATCH 2/3] net: lwip: add sntp command   Heinrich Schuchardt
    • [PATCH 2/3] net: lwip: add sntp command   Jerome Forissier
  • [PATCH 2/3] net: lwip: add sntp command   Jerome Forissier
    • [PATCH 2/3] net: lwip: add sntp command   Tom Rini
      • [PATCH 2/3] net: lwip: add sntp command   Jerome Forissier
      • [PATCH 2/3] net: lwip: add sntp command   Tom Rini
• [PATCH v2] binman: openssl: disable JTAG access by default   Bryan Brattlof
• [RFH] Future direction of the U-Boot project   Tom Rini
• [PATCH] dtc: Add Kconfig option to pad device tree blob   Tom Rini
  • [PATCH] dtc: Add Kconfig option to pad device tree blob   Eric Schikschneit
    • [PATCH] dtc: Add Kconfig option to pad device tree blob   Tom Rini
  • [PATCH] dtc: Add Kconfig option to pad device tree blob   Eric Schikschneit
    • [PATCH] dtc: Add Kconfig option to pad device tree blob   Anshul Dalal
      • [PATCH] dtc: Add Kconfig option to pad device tree blob   Tom Rini
• [PATCH] scripts/spelling.txt: Sync script with kernel v6.15   Tom Rini
• [PATCH] arm/dts/qemu-sbsa: Fix interrupt   Tom Rini
• [PATCH v3 0/2] renesas: Renesas R-Car Gen4 watchdog driver   Shmuel Leib Melamud via B4 Relay
  • [PATCH v3 2/2] renesas: Renesas R-Car Gen4 watchdog driver   Shmuel Leib Melamud via B4 Relay
    • [PATCH v3 2/2] renesas: Renesas R-Car Gen4 watchdog driver   Mattijs Korpershoek
      • [PATCH v3 2/2] renesas: Renesas R-Car Gen4 watchdog driver   Shmuel Melamud
      • [PATCH v3 2/2] renesas: Renesas R-Car Gen4 watchdog driver   Mattijs Korpershoek
    • [PATCH v3 2/2] renesas: Renesas R-Car Gen4 watchdog driver   Marek Vasut
• [PATCH v3 1/2] renesas: Handle CLK_TYPE_GEN4_MDSEL in gen3_clk_get_rate64()   Shmuel Leib Melamud via B4 Relay
  • [PATCH v3 1/2] renesas: Handle CLK_TYPE_GEN4_MDSEL in gen3_clk_get_rate64()   Mattijs Korpershoek
  • [PATCH v3 1/2] renesas: Handle CLK_TYPE_GEN4_MDSEL in gen3_clk_get_rate64()   Marek Vasut
• [PATCH 3/5] riscv: dts: th1520: Prepare binman configuration for loading OpenSBI   Leo Liang
• [PATCH 4/5] board: thead: licheepi4a: Run proper U-Boot in S-Mode   Leo Liang
• [PATCH 5/5] doc: thead: lpi4a: Update for S-Mode proper U-Boot support   Leo Liang
• [PATCH 0/1] fs: ext4fs: Fix: Data abort in ext4fs_log_gdt()   Tony Dinh
  • [PATCH 1/1] fs: ext4fs: Fix: Data abort in ext4fs_log_gdt()   Tony Dinh
• [PATCH v6 0/9] Add support for sam9x7 SoC and SAM9X75 Curiosity board   Manikandan Muralidharan
  • [PATCH v6 1/9] dt-bindings: drop at91.h from clock includes   Manikandan Muralidharan
  • [PATCH v6 2/9] clk: at91: sam9x60-pll: add support for core clock frequency inputs   Manikandan Muralidharan
  • [PATCH v6 3/9] clk: at91: sam9x60-pll: add support for HW PLL freq dividers   Manikandan Muralidharan
  • [PATCH v6 4/9] clk: at91: clk-main: drop parent_name check when registering main_rc oscillator   Manikandan Muralidharan
    • [PATCH v6 4/9] clk: at91: clk-main: drop parent_name check when registering main_rc oscillator   Eugen Hristev
      • [PATCH v6 4/9] clk: at91: clk-main: drop parent_name check when registering main_rc oscillator   Manikandan.M at microchip.com
      • [PATCH v6 4/9] clk: at91: clk-main: drop parent_name check when registering main_rc oscillator   Eugen Hristev
      • [PATCH v6 4/9] clk: at91: clk-main: drop parent_name check when registering main_rc oscillator   Manikandan.M at microchip.com
  • [PATCH v6 5/9] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family   Manikandan Muralidharan
  • [PATCH v6 6/9] ARM: at91: Add sam9x7 soc   Manikandan Muralidharan
  • [PATCH v6 7/9] ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board   Manikandan Muralidharan
  • [PATCH v6 8/9] board: sam9x75_curiosity: Add support for sam9x75 curiosity   Manikandan Muralidharan
  • [PATCH v6 9/9] configs: sam9x75_curiosity: Add initial mmc default config   Manikandan Muralidharan
• [PATCH 1/6] ti_sci_*: Add utility to access tisci firmware and SOC capability   Neha Malcom Francis
  • [PATCH 1/6] ti_sci_*: Add utility to access tisci firmware and SOC capability   Dhruva Gole
• [PATCH 6/6] arm: mach-k3: Print version of DM firmware during boot process   Neha Malcom Francis
  • [PATCH 6/6] arm: mach-k3: Print version of DM firmware during boot process   Bryan Brattlof
    • [PATCH 6/6] arm: mach-k3: Print version of DM firmware during boot process   Moteen Shah
  • [PATCH 6/6] arm: mach-k3: Print version of DM firmware during boot process   Moteen Shah
• [PATCH 2/6] ti_sci_* : Add capability to access DM firmware's metadata   Neha Malcom Francis
  • [PATCH 2/6] ti_sci_* : Add capability to access DM firmware's metadata   Dhruva Gole
    • [PATCH 2/6] ti_sci_* : Add capability to access DM firmware's metadata   Moteen Shah
  • [PATCH 2/6] ti_sci_* : Add capability to access DM firmware's metadata   Bryan Brattlof
  • [PATCH 2/6] ti_sci_* : Add capability to access DM firmware's metadata   Moteen Shah
    • [PATCH 2/6] ti_sci_* : Add capability to access DM firmware's metadata   Neha Malcom Francis
• [PATCH 3/6] firmware: ti_sci.c: Add a function to query DM firmware's capability   Neha Malcom Francis
  • [PATCH 3/6] firmware: ti_sci.c: Add a function to query DM firmware's capability   Dhruva Gole
• [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Sughosh Ganu
  • [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Tom Rini
    • Re: [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Heinrich Schuchardt
      • [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Sughosh Ganu
  • [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Ilias Apalodimas
    • [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Sughosh Ganu
      • [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Ilias Apalodimas
      • [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Sughosh Ganu
      • [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Sughosh Ganu
      • [PATCH v3 2/6] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Ilias Apalodimas
• [PULL] u-boot-riscv/next   Leo Liang
  • [PULL] u-boot-riscv/next   Tom Rini
    • [PULL] u-boot-riscv/next   Yao Zi
      • [PULL] u-boot-riscv/next   Leo Liang
• [PATCH v5 00/12] Add Synopsys MIPI I3C Driver support   Maniyam, Dinesh
• [PATCH 4/6] firmware: ti_sci.c: Add a function to request DM metadata using ti_sci* calls   Neha Malcom Francis
  • [PATCH 4/6] firmware: ti_sci.c: Add a function to request DM metadata using ti_sci* calls   Dhruva Gole
• [PATCH 5/6] arm: mach-k3: Add a function for printing DM version   Neha Malcom Francis
• [PATCH 1/2] linux/bitfield.h: import FIELD_PREP_CONST macro from Linux Kernel   Christian Marangi
  • [PATCH 2/2] mtd: spinand: winbond: add Winbond W25N04KV flash support   Christian Marangi
  • [PATCH 1/2] linux/bitfield.h: import FIELD_PREP_CONST macro from Linux Kernel   Quentin Schulz
    • [PATCH 1/2] linux/bitfield.h: import FIELD_PREP_CONST macro from Linux Kernel   Christian Marangi
      • [PATCH 1/2] linux/bitfield.h: import FIELD_PREP_CONST macro from Linux Kernel   Tom Rini
      • [PATCH 1/2] linux/bitfield.h: import FIELD_PREP_CONST macro from Linux Kernel   Quentin Schulz
• [PATCH v3 0/2] Add Onion Omega2/2+ board support   Philip Oberfichtner
• [PATCH v3 1/2] Makefile: Add size check for u-boot-with-spl.bin   Philip Oberfichtner
  • [PATCH v3 2/2] mips: mt7628: Add Onion Omega2/2+ board support   Philip Oberfichtner
• [PATCH] drivers: video: tidss: Refactor tidss_drv   Swamil Jain
  • [PATCH] drivers: video: tidss: Refactor tidss_drv   Swamil Jain
• [PATCH v3 0/7] Enhance DDR support for Arria10 SoCFPGA   Naresh Kumar Ravulapalli
  • [PATCH v3 1/7] drivers: ddr: altera: Add DRAM size checking for arria10   Naresh Kumar Ravulapalli
  • [PATCH v3 2/7] drivers: ddr: altera: Add valid RAM size check for arria10   Naresh Kumar Ravulapalli
    • [PATCH v3 2/7] drivers: ddr: altera: Add valid RAM size check for arria10   Chee, Tien Fong
      • [PATCH v3 2/7] drivers: ddr: altera: Add valid RAM size check for arria10   Ravulapalli, Naresh Kumar
  • [PATCH v3 3/7] drivers: ddr: altera: Fix incorrect address for arria10 mpu1   Naresh Kumar Ravulapalli
  • [PATCH v3 4/7] drivers: ddr: altera: Clean common code for SoC32 devices   Naresh Kumar Ravulapalli
    • [PATCH v3 4/7] drivers: ddr: altera: Clean common code for SoC32 devices   Chee, Tien Fong
  • [PATCH v3 5/7] drivers: ddr: altera: Correct code alignment in sdram file   Naresh Kumar Ravulapalli
  • [PATCH v3 6/7] drivers: ddr: altera: Improve DRAM init with Dcache   Naresh Kumar Ravulapalli
    • [PATCH v3 6/7] drivers: ddr: altera: Improve DRAM init with Dcache   Chee, Tien Fong
      • [PATCH v3 6/7] drivers: ddr: altera: Improve DRAM init with Dcache   Ravulapalli, Naresh Kumar
  • [PATCH v3 7/7] drivers: ddr: altera: Fix Cylcone5 SPL boot loop issue   Naresh Kumar Ravulapalli
    • [PATCH v3 7/7] drivers: ddr: altera: Fix Cylcone5 SPL boot loop issue   Chee, Tien Fong
      • [PATCH v3 7/7] drivers: ddr: altera: Fix Cylcone5 SPL boot loop issue   Ravulapalli, Naresh Kumar
• [PATCH v6] arm: imx: Add support for Mettler-Toledo snowflake board   Wojciech Dubowik
  • [PATCH v6] arm: imx: Add support for Mettler-Toledo snowflake board   Sebastian Andrzej Siewior
• [PATCH 01/10] ARM: stm32: Add STM32MP13xx SPL Kconfig options   Patrick DELAUNAY
• [PATCH 03/10] ARM: stm32: Limit early cache enablement in SPL to STM32MP15xx   Patrick DELAUNAY
• [PATCH 00/11] riscv: Add support for P8700 platform on Boston board   Uros Stajic
  • [PATCH 01/11] riscv: Add initial support for P8700 SoC   Uros Stajic
  • [PATCH 02/11] gpio: Add GPIO driver for Intel EG20T   Uros Stajic
  • [PATCH 03/11] pci: xilinx: Add probe function and improve memory region handling   Uros Stajic
    • [PATCH 03/11] pci: xilinx: Add probe function and improve memory region handling   Michal Simek
  • [PATCH 04/11] riscv: Add support for MIPS GIC syscon on RISC-V SoCs   Uros Stajic
  • [PATCH 05/11] net: pch_gbe: Add PHY reset and MAC address fallback for RISC-V   Uros Stajic
  • [PATCH 06/11] libfdt: Allow non-64b aligned memreserve entries   Uros Stajic
  • [PATCH 07/11] riscv: p8700: Add software emulation for AMO* instructions   Uros Stajic
  • [PATCH 08/11] riscv: p8700: Add Coherence Manager (CM) and IOCU support   Uros Stajic
  • [PATCH 09/11] riscv: boston: Add support for LED character display command   Uros Stajic
  • [PATCH 10/11] cmd: riscv: Add 'startharts' command to start multiple harts   Uros Stajic
  • [PATCH 11/11] timer: p8700: Add support for reading time from memory-mapped mtime   Uros Stajic
• [PATCH 04/10] ARM: stm32: Add STM32MP13xx PMIC initialization for DDR3 DRAM type   Patrick DELAUNAY
• [PATCH 05/10] ARM: stm32: Add STM32MP13xx debug UART initialization   Patrick DELAUNAY
• [PATCH v2] ARM: Align image end to 8 bytes to fit DT alignment   Tom Rini
• [PATCH 06/10] ARM: dts: stm32: Add stm32mp13-ddr.dtsi template   Patrick DELAUNAY
• [PATCH v7 00/10] Add falcon support for am62a, 62p and 62x   Anshul Dalal
  • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
    • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Tom Rini
      • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
      • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Tom Rini
      • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
      • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Tom Rini
      • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
      • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Tom Rini
      • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
      • [PATCH v7 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Tom Rini
  • [PATCH v7 02/10] spl: make CMD_BOOTZ exclusive with TI_SECURE_DEVICE   Anshul Dalal
    • [PATCH v7 02/10] spl: make CMD_BOOTZ exclusive with TI_SECURE_DEVICE   Tom Rini
  • [PATCH v7 03/10] mach-k3: fix reading size and addr from fdt on R5   Anshul Dalal
  • [PATCH v7 04/10] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
    • [PATCH v7 04/10] arch: arm: k3-binman: add fit for falcon boot   Bryan Brattlof
      • [PATCH v7 04/10] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
      • [PATCH v7 04/10] arch: arm: k3-binman: add fit for falcon boot   Andrew Davis
      • [PATCH v7 04/10] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
  • [PATCH v7 05/10] mach-k3: sysfw-loader: update img_hdr for falcon   Anshul Dalal
  • [PATCH v7 06/10] config: add falcon boot config fragment for am62x   Anshul Dalal
  • [PATCH v7 07/10] board: ti: add default dtb for am62 in falcon mode   Anshul Dalal
    • [PATCH v7 07/10] board: ti: add default dtb for am62 in falcon mode   Tom Rini
      • [PATCH v7 07/10] board: ti: add default dtb for am62 in falcon mode   Anshul Dalal
      • [PATCH v7 07/10] board: ti: add default dtb for am62 in falcon mode   Tom Rini
      • [PATCH v7 07/10] board: ti: add default dtb for am62 in falcon mode   Anshul Dalal
      • [PATCH v7 07/10] board: ti: add default dtb for am62 in falcon mode   Tom Rini
      • [PATCH v7 07/10] board: ti: add default dtb for am62 in falcon mode   Anshul Dalal
      • [PATCH v7 07/10] board: ti: add default dtb for am62 in falcon mode   Tom Rini
  • [PATCH v7 08/10] mach-k3: common: enable falcon mode for 62 platform   Anshul Dalal
    • [PATCH v7 08/10] mach-k3: common: enable falcon mode for 62 platform   Tom Rini
      • [PATCH v7 08/10] mach-k3: common: enable falcon mode for 62 platform   Anshul Dalal
  • [PATCH v7 09/10] Makefile: update tispl regex to also clean falcon spl   Anshul Dalal
  • [PATCH v7 10/10] doc: ti: am62: add falcon mode documentation   Anshul Dalal
• [PATCH 09/10] ARM: dts: stm32: Add SPL specifics for DH STM32MP13xx DHCOR DHSBC   Patrick DELAUNAY
• [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Raymond Mao
  • [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Tom Rini
    • [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Raymond Mao
      • [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Tom Rini
      • [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Raymond Mao
      • [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Tom Rini
      • [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Raymond Mao
      • [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Jerome Forissier
      • [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Tom Rini
      • [PATCH v2] makefile: fix Clang link error when RSA_PUBLIC_KEY_PARSER is selected   Raymond Mao
• [PATCH v4 08/28] coreboot: Move coreboot logic out of x86 to a generic place   Tom Rini
• [PULL] Please pull qcom-more-for-2025.07   Casey Connolly
  • [PULL] Please pull qcom-more-for-2025.07   Tom Rini
• [PATCH 0/3] board: dragonboard410c: More fixes for U-Boot v2025.07   Casey Connolly
• [PATCH] power: qcom_vbus_regulator: add and fix support for pmic variants   Casey Connolly
• [PATCH v2 0/6] clk: qcom: apq8016: Clock fixes for U-Boot v2025.07   Casey Connolly
• [PATCH] button: qcom-pmic: allow to specify code in devicetree   Casey Connolly
• [PATCH v2] mach-snapdragon: Update fdtfile logic to work for RB1 and RB2   Casey Connolly
• [PATCH 00/17] Audit include list for include/[a-m]*.h   Tom Rini
• [PATCH v4 04/28] clk: qcom: Support uart clk on sc7280 CRD   Casey Connolly
• [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Raymond Mao
  • [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Tom Rini
    • [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Raymond Mao
      • [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Tom Rini
      • [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Raymond Mao
      • [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Anshul Dalal
      • [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Tom Rini
      • [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Patrice CHOTARD
      • [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Tom Rini
      • [PATCH] sandbox: solve undefined reference to pthread_kill symbol   Raymond Mao
• [PATCH v1 0/6] Add initial support for IPQ5424 based boards   Casey Connolly
• TPM result   Simon Glass
  • TPM result   Ilias Apalodimas
• [PATCH v6 2/3] common: board: make initcalls static   Simon Glass
  • [PATCH v6 2/3] common: board: make initcalls static   Tom Rini
    • [PATCH v6 2/3] common: board: make initcalls static   Simon Glass
• [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases   Simon Glass
• [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform   Casey Connolly
  • [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform   Casey Connolly
    • [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform   Tom Rini
      • [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform   Casey Connolly
• [PATCH v2 3/5] clk/qcom: qcs615: Add GCC clock driver for QCS615   Casey Connolly
• [PATCH v2] pinctrl: qcom: handle reserved ranges   Neil Armstrong
• [PATCH RFC/RFT 0/2] gpio: qcom: rewritte SPMI gpio driver from Linux driver   Neil Armstrong
  • [PATCH RFC/RFT 0/2] gpio: qcom: rewritte SPMI gpio driver from Linux driver   Casey Connolly
    • [PATCH RFC/RFT 0/2] gpio: qcom: rewritte SPMI gpio driver from Linux driver   Neil Armstrong
• [PATCH v2 01/13] clk: scmi: add compatibility with clock protocol 2.0   Patrick DELAUNAY
  • [PATCH v2 01/13] clk: scmi: add compatibility with clock protocol 2.0   Patrice CHOTARD
• [PATCH v2 02/13] clk: stm32mp25: Add clock driver support   Patrick DELAUNAY
  • [PATCH v2 02/13] clk: stm32mp25: Add clock driver support   Patrice CHOTARD
• [PATCH v2 03/13] clk: stm32mp25: implement clock check security function   Patrick DELAUNAY
  • [PATCH v2 03/13] clk: stm32mp25: implement clock check security function   Patrice CHOTARD
• [PATCH v2 04/13] clk: add CONFIG_CLK_AUTO_ID   Patrick DELAUNAY
  • [PATCH v2 04/13] clk: add CONFIG_CLK_AUTO_ID   Patrice CHOTARD
    • [PATCH v2 04/13] clk: add CONFIG_CLK_AUTO_ID   Michael Nazzareno Trimarchi
      • [PATCH v2 04/13] clk: add CONFIG_CLK_AUTO_ID   Patrice CHOTARD
      • [PATCH v2 04/13] clk: add CONFIG_CLK_AUTO_ID   Michael Nazzareno Trimarchi
      • [PATCH v2 04/13] clk: add CONFIG_CLK_AUTO_ID   Michael Nazzareno Trimarchi
      • [PATCH v2 04/13] clk: add CONFIG_CLK_AUTO_ID   Patrice CHOTARD
• [PATCH v2 05/13] clk: sandbox: update driver for CONFIG_CLK_AUTO_ID support   Patrick DELAUNAY
  • [PATCH v2 05/13] clk: sandbox: update driver for CONFIG_CLK_AUTO_ID support   Patrice CHOTARD
• [PATCH v2 06/13] sandbox: test: update for CONFIG_CLK_AUTO_ID support   Patrick DELAUNAY
  • [PATCH v2 06/13] sandbox: test: update for CONFIG_CLK_AUTO_ID support   Patrice CHOTARD
• [PATCH v2 07/13] clk: fixed_rate: configure clock ID with CONFIG_CLK_AUTO_ID   Patrick DELAUNAY
  • [PATCH v2 07/13] clk: fixed_rate: configure clock ID with CONFIG_CLK_AUTO_ID   Patrice CHOTARD
• [PATCH v2 08/13] clk: scmi: manage properly the clk identifier with CCF   Patrick DELAUNAY
  • [PATCH v2 08/13] clk: scmi: manage properly the clk identifier with CCF   Patrice CHOTARD
• [PATCH v2 09/13] phy: stm32-usbphyc: manage properly the clk identifier with CCF   Patrick DELAUNAY
  • [PATCH v2 09/13] phy: stm32-usbphyc: manage properly the clk identifier with CCF   Patrice CHOTARD
• [PATCH v2 10/13] clk: stm32: fix clock counter   Patrick DELAUNAY
  • [PATCH v2 10/13] clk: stm32: fix clock counter   Patrice CHOTARD
• [PATCH v2 11/13] reset: stm32mp25: add stm32mp25 reset driver   Patrick DELAUNAY
  • [PATCH v2 11/13] reset: stm32mp25: add stm32mp25 reset driver   Patrice CHOTARD
• [PATCH v2 12/13] ARM: dts: stm32: switch from fixed to scmi clocks for stm32mp257f-ev1   Patrick DELAUNAY
• [PATCH v2 13/13] configs: stm32mp25: increase SYS_MALLOC_F_LEN to 0x60000   Patrick DELAUNAY
• [PATCH V3 2/3] test: cmd: nvedit: Add basic unit tests   Tom Rini
  • [PATCH V3 2/3] test: cmd: nvedit: Add basic unit tests   Christoph Niedermaier
• [PATCH] ARM: dts: aspeed: Add NVIDIA GB200 UT3.0b   Donald Shannon
• [PATCH] rockchip: Add support for GameForce Ace   Chris Morgan
  • [PATCH] rockchip: Add support for GameForce Ace   Kever Yang
    • [PATCH] rockchip: Add support for GameForce Ace   Chris Morgan
• [PATCH] tools: fix handle leak in ifdtool.c   Tom Rini
• [PATCH] pinctrl: gpio: sx150x: add Semtech SX150x I2C GPIO expander and pinctrl driver   Tom Rini
• [PATCH v1] toradex: tdx-cfg-block: add new pid4 support   Tom Rini
• [PATCH v1] board: toradex: add verdin am62p support   Tom Rini
• [PATCH v1] linux/sizes.h: sync from kernel   Tom Rini
• [PATCH] i2c: mux: Fix the crash when the i2c-arbitrator node is present   Abbarapu, Venkatesh
• [PATCH 1/3] usb: udc: ci: support USB gadget driver model   Wojciech Dubowik
• [PATCH v7] arm: imx: Add support for Mettler-Toledo snowflake board   Wojciech Dubowik
  • [PATCH v7] arm: imx: Add support for Mettler-Toledo snowflake board   Tom Rini
    • [PATCH v7] arm: imx: Add support for Mettler-Toledo snowflake board   Fabio Estevam
      • EXTERNAL - [PATCH v7] arm: imx: Add support for Mettler-Toledo snowflake board   Wojciech Dubowik
• [PATCH] board: qualcomm: add a MAINTAINERS file   Casey Connolly
  • [PATCH] board: qualcomm: add a MAINTAINERS file   Neil Armstrong
• [PATCH v2] ARM: imx: mxs: Add support for imx287 based BTT devices   Lukasz Majewski
  • [PATCH v2] ARM: imx: mxs: Add support for imx287 based BTT devices   Fabio Estevam
    • [PATCH v2] ARM: imx: mxs: Add support for imx287 based BTT devices   Lukasz Majewski
• [PATCH v3 0/2] bootstd: New bootmeth for RAUC A/B systems   Martin Schwan
  • [PATCH v3 1/2] bootstd: Add implementation for bootmeth rauc   Martin Schwan
    • [PATCH v3 1/2] bootstd: Add implementation for bootmeth rauc   Wadim Egorov
  • [PATCH v3 2/2] doc: Add description for bootmeth rauc   Martin Schwan
  • [PATCH v3 0/2] bootstd: New bootmeth for RAUC A/B systems   Tom Rini
  • [PATCH v3 0/2] bootstd: New bootmeth for RAUC A/B systems   Simon Glass
    • [PATCH v3 0/2] bootstd: New bootmeth for RAUC A/B systems   Martin Schwan
      • [PATCH v3 0/2] bootstd: New bootmeth for RAUC A/B systems   Tom Rini
  • [PATCH v3 0/2] bootstd: New bootmeth for RAUC A/B systems   neil.armstrong at linaro.org
    • [PATCH v3 0/2] bootstd: New bootmeth for RAUC A/B systems   Tom Rini
      • [PATCH v3 0/2] bootstd: New bootmeth for RAUC A/B systems   Neil Armstrong
      • [PATCH v3 0/2] bootstd: New bootmeth for RAUC A/B systems   Martin Schwan
• [PATCH] x86: Correct condition for init_cache_f_r()   Simon Glass
  • [PATCH] x86: Correct condition for init_cache_f_r()   Jerome Forissier
    • [PATCH] x86: Correct condition for init_cache_f_r()   Simon Glass
      • [PATCH] x86: Correct condition for init_cache_f_r()   Tom Rini
      • [PATCH] x86: Correct condition for init_cache_f_r()   Simon Glass
      • [PATCH] x86: Correct condition for init_cache_f_r()   Tom Rini
  • [PATCH] x86: Correct condition for init_cache_f_r()   Tom Rini
• [PATCH v3 0/3] u-boot chain-loading LineageOS bootimg   Casey Connolly
• [PATCH v4 24/28] board: google: Add board_debug_uart_init() for Trogdor   Casey Connolly
• [PATCH] mkimage: do a rough estimate for the size needed for hashes/signatures   Tom Rini
  • [PATCH] mkimage: do a rough estimate for the size needed for hashes/signatures   Rasmus Villemoes
    • [PATCH] mkimage: do a rough estimate for the size needed for hashes/signatures   Tom Rini
• [PATCH v2] sandbox: solve undefined reference to pthread_kill symbol   Raymond Mao
  • [PATCH v2] sandbox: solve undefined reference to pthread_kill symbol   Jerome Forissier
  • [PATCH v2] sandbox: solve undefined reference to pthread_kill symbol   Patrice CHOTARD
• [PATCH v2 1/2] linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15   Christian Marangi
  • [PATCH v2 2/2] mtd: spinand: winbond: add Winbond W25N04KV flash support   Christian Marangi
• [PATCH v1] ti: k3: abstract common fdt api for reserved mem fixups   Tom Rini
  • [PATCH v1] ti: k3: abstract common fdt api for reserved mem fixups   Anshul Dalal
• [PATCH] drivers: scsi: fix: memory leak in do_scsi_scan_one()   Tom Rini
  • [PATCH] drivers: scsi: fix: memory leak in do_scsi_scan_one()   Heinrich Schuchardt
• [PATCH v1] mach-k3: am62ax: enable caches for the SPL stage   Tom Rini
  • [PATCH v1] mach-k3: am62ax: enable caches for the SPL stage   Tom Rini
• [PATCH 00/12] drop volatile from global data   Rasmus Villemoes
  • [PATCH 01/12] arm: drop volatile qualifier from gd pointer   Rasmus Villemoes
    • [PATCH 01/12] arm: drop volatile qualifier from gd pointer   Anshul Dalal
  • [PATCH 03/12] mips: drop volatile qualifier from gd pointer   Rasmus Villemoes
  • [PATCH 04/12] microblaze: drop volatile qualifier from gd pointer   Rasmus Villemoes
  • [PATCH 05/12] m68k: drop volatile qualifier from gd pointer   Rasmus Villemoes
  • [PATCH 06/12] m68k: drop pointless #if 0 block   Rasmus Villemoes
    • [PATCH 06/12] m68k: drop pointless #if 0 block   Angelo Dureghello
  • [PATCH 07/12] arc: drop volatile qualifier from gd pointer   Rasmus Villemoes
  • [PATCH 08/12] arm: imx: remove unnecessary volatile qualifiers from "save gd" variables   Rasmus Villemoes
    • [PATCH 08/12] arm: imx: remove unnecessary volatile qualifiers from "save gd" variables   Anshul Dalal
  • [PATCH 09/12] efi: drop volatile qualifier from "save gd" variables   Rasmus Villemoes
    • Re: [PATCH 09/12] efi: drop volatile qualifier from "save gd" variables   Heinrich Schuchardt
  • [PATCH 10/12] lib/trace: drop volatile qualifier from "save gd" variables   Rasmus Villemoes
  • [PATCH 11/12] arm: remove volatile from set_gd prototype   Rasmus Villemoes
  • [PATCH 12/12] riscv: remove volatile from set_gd prototype   Rasmus Villemoes
  • [PATCH 00/12] drop volatile from global data   Tom Rini
    • [PATCH 00/12] drop volatile from global data   Rasmus Villemoes
      • [PATCH 00/12] drop volatile from global data   Tom Rini
    • [PATCH 00/12] drop volatile from global data   Tom Rini
  • [PATCH 00/12] drop volatile from global data   Tom Rini
• [PATCH 02/12] powerpc: drop volatile qualifier from gd pointer   Rasmus Villemoes
• [PATCH v2] mmc: am654_sdhci: Clear UHS_MODE_SELECT when <= MMC_HS_52   Tom Rini
• [PATCH] board: ti: am62ax: env: Use default MMC related args   Tom Rini
• [PATCH v2] clk: versal: Fix clock driver dependency   Michal Simek
• [PATCH v2] env: mmc: fix offsets relative to the end of the partition   Michael Walle
  • [PATCH v2] env: mmc: fix offsets relative to the end of the partition   Quentin Schulz
    • [PATCH v2] env: mmc: fix offsets relative to the end of the partition   Andrew Goodbody
      • [PATCH v2] env: mmc: fix offsets relative to the end of the partition   Michael Walle
  • [PATCH v2] env: mmc: fix offsets relative to the end of the partition   Javier Viguera
    • [PATCH v2] env: mmc: fix offsets relative to the end of the partition   Michael Walle
• 回复: 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels   牛 志宏
  • 回复: 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels   Yao Zi
  • 回复: 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels   Tom Rini
    • 回复: 回复: 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels   牛 志宏
• [PATCH RFT v4 2/3] fastboot: blk: switch emmc to use the block helpers   Neil Armstrong
• [PATCH RFT v4 3/3] fastboot: integrate block flashing back-end   Neil Armstrong
  • [PATCH RFT v4 3/3] fastboot: integrate block flashing back-end   Tom Rini
    • [PATCH RFT v4 3/3] fastboot: integrate block flashing back-end   Neil Armstrong
      • [PATCH RFT v4 3/3] fastboot: integrate block flashing back-end   Mattijs Korpershoek
      • [PATCH RFT v4 3/3] fastboot: integrate block flashing back-end   Neil Armstrong
      • [PATCH RFT v4 3/3] fastboot: integrate block flashing back-end   Tom Rini
• [PATCH v4 23/28] mach-snapdragon: Allow usb3 to work when a coreboot payload   Casey Connolly
• [PATCH] Revert "caam: Fix CAAM error on startup"   Fabio Estevam
  • [PATCH] Revert "caam: Fix CAAM error on startup"   Peng Fan
  • [PATCH] Revert "caam: Fix CAAM error on startup"   Tom Rini
    • [PATCH] Revert "caam: Fix CAAM error on startup"   Fabio Estevam
  • [PATCH] Revert "caam: Fix CAAM error on startup"   Tom Rini
• [PATCH v3] ARM: imx: mxs: Add support for imx287 based BTT devices   Lukasz Majewski
  • [PATCH v3] ARM: imx: mxs: Add support for imx287 based BTT devices   Fabio Estevam
• [GIT PULL] amd/xilinx patches for v2025.07-rc4   Michal Simek
  • [GIT PULL] amd/xilinx patches for v2025.07-rc4   Tom Rini
• [PATCH] tpm: Export the function to set up the TPM log   Simon Glass
  • [PATCH] tpm: Export the function to set up the TPM log   Ilias Apalodimas
• Raspberry Pi Compute Module 5 support   Jonas Kvinge
  • Raspberry Pi Compute Module 5 support   Jojan
    • Raspberry Pi Compute Module 5 support   Jonas Kvinge
      • Raspberry Pi Compute Module 5 support   Jojan
      • Raspberry Pi Compute Module 5 support   Jonas Kvinge
      • Raspberry Pi Compute Module 5 support   Jojan
      • Raspberry Pi Compute Module 5 support   Peter Robinson
• [PATCH 1/2] ARM: bootm: Add support for starting Linux through OpTee-OS on ARMv7a   Tom Rini
• [PATCH v3 0/4] mkimage: validate image references in FIT configurations   Tom Rini
• [PATCH 0/5] Bring up secondary cores on Lichee Pi 4A   Yao Zi
  • [PATCH 1/5] riscv: aclint_ipi: Support T-Head C900 CLINT   Yao Zi
  • [PATCH 2/5] riscv: cpu: th1520: Setup CPU feature CSRs in harts_early_init   Yao Zi
  • [PATCH 3/5] riscv: cpu: th1520: Add a routine to bring up secondary cores   Yao Zi
  • [PATCH 4/5] riscv: dts: th1520: Preserve CLINT node for SPL   Yao Zi
  • [PATCH 5/5] board: thead: licheepi4a: Bring up secondary cores in SPL   Yao Zi
• [PATCH v2 00/13] sntp for NET_LWIP   Jerome Forissier
  • [PATCH v2 01/13] lwip: remove net/lwip/eth_internal.h   Jerome Forissier
  • [PATCH v2 02/13] lwip: split cmd/net-lwip.c into one file per command   Jerome Forissier
    • [PATCH v2 02/13] lwip: split cmd/net-lwip.c into one file per command   Tom Rini
  • [PATCH v2 03/13] lwip: split net/lwip/wget.c   Jerome Forissier
    • [PATCH v2 03/13] lwip: split net/lwip/wget.c   Tom Rini
  • [PATCH v2 04/13] lwip: move net/lwip/dns.c to cmd/lwip   Jerome Forissier
    • [PATCH v2 04/13] lwip: move net/lwip/dns.c to cmd/lwip   Tom Rini
  • [PATCH v2 05/13] lwip: move net/lwip/ping.c to cmd/lwip   Jerome Forissier
  • [PATCH v2 06/13] lwip: dns: do not return CMD_RET_FAILURE on successful resolution   Jerome Forissier
  • [PATCH v2 07/13] lwip: dns: do not print IP address when a variable is specified   Jerome Forissier
    • [PATCH v2 07/13] lwip: dns: do not print IP address when a variable is specified   Tom Rini
      • [PATCH v2 07/13] lwip: dns: do not print IP address when a variable is specified   Jerome Forissier
  • [PATCH v2 08/13] lwip: add net_lwip_dns_resolve()   Jerome Forissier
  • [PATCH v2 09/13] lwip: ping: accept host name when CONFIG_CMD_DNS=y   Jerome Forissier
  • [PATCH v2 10/13] net: extract function net_sntp_set_rtc() from sntp_handler()   Jerome Forissier
  • [PATCH v2 11/13] lwip: add sntp command   Jerome Forissier
  • [PATCH v2 12/13] Update doc/README.SNTP   Jerome Forissier
    • [PATCH v2 12/13] Update doc/README.SNTP   Tom Rini
  • [PATCH v2 13/13] configs: qemu_arm64_lwip_defconfig: enable CMD_SNTP   Jerome Forissier
• [PATCH v3 0/5] linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15 + winbond   Christian Marangi
  • [PATCH v3 1/5] linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15   Christian Marangi
  • [PATCH v3 2/5] clk: imx: add missing linux/bug.h header for WARN   Christian Marangi
  • [PATCH v3 3/5] iommu: qcom-smmu: add missing linux/bug.h header for WARN_ON   Christian Marangi
  • [PATCH v3 4/5] arm: apple: rtkit: add missing header linux/bug.h and linux/bitops.h   Christian Marangi
  • [PATCH v3 5/5] mtd: spinand: winbond: add Winbond W25N04KV flash support   Christian Marangi
  • [PATCH v3 0/5] linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15 + winbond   Quentin Schulz
• [PATCH v1 0/1] lib: ecdsa: Add support for loading ECDSA public key from FDT   Jamin Lin
  • [PATCH v1 1/1] lib: ecdsa: Add support for loading ECDSA public key from FDT   Jamin Lin
• [PATCH] rockchip: px30: Implement checkboard() to print SoC variant   Kever Yang
  • [PATCH] rockchip: px30: Implement checkboard() to print SoC variant   Quentin Schulz
    • [PATCH] rockchip: px30: Implement checkboard() to print SoC variant   Kever Yang
• [PATCH v4 1/5] rockchip: io-domain: Add debug logging for regulators during probe   Kever Yang
• [PATCH v4 2/5] rockchip: io-domain: Add CONFIG_SPL_ROCKCHIP_IODOMAIN   Kever Yang
• [PATCH v4 3/5] regulator: rk8xx: Add CONFIG_SPL_REGULATOR_RK8XX   Kever Yang
• [PATCH v4 4/5] rockchip: rk3399-nanopi-4: Allow MMC driver to control SD regulators   Kever Yang
• [PATCH v4 5/5] rockchip: rk3399-nanopi-4: Enable IO-domain driver in SPL   Kever Yang
• [PATCH] power: rk8xx: fix swapped mask and value in init registers for RK806   Kever Yang
• [PATCH RFT v5 0/3] fastboot: add support for generic block flashing   Neil Armstrong
  • [PATCH RFT v5 1/3] fastboot: blk: introduce fastboot block flashing support   Neil Armstrong
  • [PATCH RFT v5 2/3] fastboot: blk: switch emmc to use the block helpers   Neil Armstrong
  • [PATCH RFT v5 3/3] fastboot: integrate block flashing back-end   Neil Armstrong
    • [PATCH RFT v5 3/3] fastboot: integrate block flashing back-end   Tom Rini
      • [PATCH RFT v5 3/3] fastboot: integrate block flashing back-end   Neil Armstrong
  • [PATCH RFT v5 0/3] fastboot: add support for generic block flashing   Mattijs Korpershoek
• [PATCH v1] i2c: muxes: pca954x: add pca9545 support   Frank Wunderlich
  • [PATCH v1] i2c: muxes: pca954x: add pca9545 support   Michal Simek
• [PATCH RFC v2 3/8] tools: binman: mark optional missing blobs as absent   Yannic Moog
• [PATCH v2] rockchip: px30: Implement checkboard() to print SoC variant   Quentin Schulz
  • [PATCH v2] rockchip: px30: Implement checkboard() to print SoC variant   Jonas Karlman
• [PATCH v4] ARM: imx: mxs: Add support for imx287 based BTT devices   Lukasz Majewski
  • [PATCH v4] ARM: imx: mxs: Add support for imx287 based BTT devices   Fabio Estevam
• [PATCH v2 1/5] usb: onboard-hub: Use the ofnode to check if the peer-hub was probed   Quentin Schulz
• [PATCH v2 2/5] usb: onboard-hub: Use devm API do automatically free the reset GPIO   Quentin Schulz
• [PATCH v2 4/5] usb: onboard-hub: Add support for multiple power supplies   Quentin Schulz
• [PATCH 0/2] Add baudrate accuracy compensation for MediaTek UART driver   Tom Rini
• [PATCH v2] cmd: bootmenu: permit to select bootmenu entry with a shortcut   Tom Rini
• [PATCH] scripts/setlocalversion: sync with linux v6.15   Tom Rini
• [PATCH] armv8: fix Clang warning on writing 32-bit variable to a 64-bit register   Tom Rini
• [PATCH] arm: dts: remove k3-serdes.h   Tom Rini
• common/spl fixes   Mikhail Kshevetskiy
  • [PATCH 1/3] common/spl: fix potential out of buffer access in spl_fit_get_image_name function   Mikhail Kshevetskiy
    • [PATCH 1/3] common/spl: fix potential out of buffer access in spl_fit_get_image_name function   Tom Rini
      • [PATCH v2 0/3] common/spl fixes   Mikhail Kshevetskiy
      • [PATCH v2 2/3] common/spl: handle properly images with bad checksum   Mikhail Kshevetskiy
      • [PATCH v2 2/3] common/spl: handle properly images with bad checksum   Jonas Karlman
      • [PATCH v2 2/3] common/spl: handle properly images with bad checksum   Mikhail Kshevetskiy
      • [PATCH v2 2/3] common/spl: handle properly images with bad checksum   Tom Rini
      • [PATCH v3 0/3] common/spl fixes   Mikhail Kshevetskiy
      • [PATCH v3 1/3] common/spl: fix potential out of buffer access in spl_fit_get_image_name function   Mikhail Kshevetskiy
      • [PATCH v3 2/3] common/spl: handle properly images with bad checksum   Mikhail Kshevetskiy
      • [PATCH v3 3/3] common/spl: improve error handling in spl_fit   Mikhail Kshevetskiy
      • [PATCH v3 3/3] common/spl: improve error handling in spl_fit   Anshul Dalal
      • [PATCH v4 0/3] common/spl fixes   Mikhail Kshevetskiy
      • [PATCH v4 1/3] common/spl: fix potential out of buffer access in spl_fit_get_image_name function   Mikhail Kshevetskiy
      • [PATCH v4 2/3] common/spl: handle properly images with bad checksum   Mikhail Kshevetskiy
      • [PATCH v4 3/3] common/spl: improve error handling in spl_fit   Mikhail Kshevetskiy
      • [PATCH v5 0/3] common/spl fixes   Mikhail Kshevetskiy
      • [PATCH v5 1/3] common/spl: fix potential out of buffer access in spl_fit_get_image_name function   Mikhail Kshevetskiy
      • [PATCH v5 2/3] common/spl: handle properly images with bad checksum   Mikhail Kshevetskiy
      • [PATCH v5 3/3] common/spl: improve error handling in spl_fit   Mikhail Kshevetskiy
      • [PATCH v2 3/3] common/spl: improve error handling in spl_fit   Mikhail Kshevetskiy
      • [PATCH v2 3/3] common/spl: improve error handling in spl_fit   Jonas Karlman
      • [PATCH v2 3/3] common/spl: improve error handling in spl_fit   Mikhail Kshevetskiy
      • [PATCH v2 1/3] common/spl: fix potential out of buffer access in spl_fit_get_image_name function   Mikhail Kshevetskiy
      • [PATCH v2 1/3] common/spl: fix potential out of buffer access in spl_fit_get_image_name function   Tom Rini
  • [PATCH 2/3] common/spl: handle properly images with bad checksum   Mikhail Kshevetskiy
  • [PATCH 3/3] common/spl: improve error handling in spl_fit   Mikhail Kshevetskiy
    • [PATCH 3/3] common/spl: improve error handling in spl_fit   Tom Rini
• [PATCH 0/3] drivers/net/airoha_eth: fixes   Mikhail Kshevetskiy
  • [PATCH 1/3] drivers/net/airoha_eth: add missed terminator for compatible devices list   Mikhail Kshevetskiy
    • [PATCH 1/3] drivers/net/airoha_eth: add missed terminator for compatible devices list   Christian Marangi
      • [PATCH v2 0/3] drivers/net/airoha_eth: fixes   Mikhail Kshevetskiy
      • [PATCH v2 1/3] drivers/net/airoha_eth: add missing terminator for compatible devices list   Mikhail Kshevetskiy
      • [PATCH v2 2/3] drivers/net/airoha_eth: fix packet transmission errors   Mikhail Kshevetskiy
      • [PATCH v2 3/3] drivers/net/airoha_eth: fix stalling in package receiving   Mikhail Kshevetskiy
      • [PATCH v3 0/3] drivers/net/airoha_eth: fixes   Mikhail Kshevetskiy
      • [PATCH v3 1/3] drivers/net/airoha_eth: add missing terminator for compatible devices list   Mikhail Kshevetskiy
      • [PATCH v3 2/3] drivers/net/airoha_eth: fix packet transmission errors   Mikhail Kshevetskiy
      • [PATCH v3 3/3] drivers/net/airoha_eth: fix stalling in package receiving   Mikhail Kshevetskiy
  • [PATCH 2/3] drivers/net/airoha_eth: fix packet transmission errors   Mikhail Kshevetskiy
  • [PATCH 3/3] drivers/net/airoha_eth: fix stalling in package receiving   Mikhail Kshevetskiy
    • [PATCH 3/3] drivers/net/airoha_eth: fix stalling in package receiving   Christian Marangi
• [PATCH] arm/airoha: reset_cpu() does not take any params   Mikhail Kshevetskiy
  • [PATCH] arm/airoha: reset_cpu() does not take any params   Tom Rini
    • [PATCH v2] arm/airoha: reset_cpu() does not take any params   Mikhail Kshevetskiy
      • [PATCH v2] arm/airoha: reset_cpu() does not take any params   Tom Rini
• [PATCH v1 0/7] Hex value prefix case cleanup   E Shattow
  • [PATCH v1 1/7] configs: use lowercase hex prefix style   E Shattow
  • [PATCH v1 2/7] board: use lowercase hex prefix style   E Shattow
  • [PATCH v1 3/7] drivers: use lowercase hex prefix style   E Shattow
  • [PATCH v1 4/7] tools: use lowercase hex prefix style   E Shattow
  • [PATCH v1 5/7] lib: use lowercase hex prefix style   E Shattow
  • [PATCH v1 6/7] arch: use lowercase hex prefix style   E Shattow
  • [PATCH v1 7/7] include: use lowercase hex prefix style   E Shattow
  • [PATCH v1 0/7] Hex value prefix case cleanup   Tom Rini
• [PATCH v2 0/5] A series of patch for enable sc7180 android boot   George Chan via B4 Relay
  • [PATCH v2 2/5] bootm: Append bootargs value when bootmeth_android provide cmdline   George Chan via B4 Relay
  • [PATCH v2 3/5] boot: bootmeth_android: Conditionally dependent on abootimg   George Chan via B4 Relay
    • [PATCH v2 3/5] boot: bootmeth_android: Conditionally dependent on abootimg   Mattijs Korpershoek
  • [PATCH v2 4/5] iommu: qcom-smmu: Introduce sc7180 compatible string   George Chan via B4 Relay
  • [PATCH v2 5/5] usb: gadget: Introduce usb gadget vendor/product default id for ARCH_QCOM   George Chan via B4 Relay
    • [PATCH v2 5/5] usb: gadget: Introduce usb gadget vendor/product default id for ARCH_QCOM   Mattijs Korpershoek
• [PATCH v2 1/5] image-android: Prepend/postpend default bootargs value with given bootcmd   George Chan via B4 Relay
  • [PATCH v2 1/5] image-android: Prepend/postpend default bootargs value with given bootcmd   Mattijs Korpershoek
• [PATCH v5 00/12] Rockchip VOP2 support   Dang Huynh
  • [PATCH v5 01/12] video: rockchip: dw-mipi-dsi: Depend on CONFIG_VIDEO_BRIDGE   Dang Huynh
  • [PATCH v5 02/12] video: rockchip: dw_mipi_dsi: Improve pixel clock calculations   Dang Huynh
  • [PATCH v5 03/12] video: rockchip: dw_mipi_dsi: Proceed when external PHY is not defined   Dang Huynh
  • [PATCH v5 04/12] video: rockchip: dw-mipi-dsi: Add get_display_timing support   Dang Huynh
  • [PATCH v5 05/12] video: Add BOE TH101MB31IG002-28A MIPI-DSI panel   Dang Huynh
  • [PATCH v5 06/12] video: rockchip: Add VOP2 support   Dang Huynh
  • [PATCH v5 07/12] video: rockchip: vop2: Add video bridge support   Dang Huynh
  • [PATCH v5 08/12] dts: rockchip: rk356x: Prerelocate VOP in U-Boot proper   Dang Huynh
  • [PATCH v5 09/12] configs: quartz64: Enable vidconsole   Dang Huynh
  • [PATCH v5 10/12] video: rockchip: Add HDMI support for RK3568   Dang Huynh
  • [PATCH v5 11/12] configs: pinetab2-rk3566: Enable video and USB keyboard   Dang Huynh
  • [PATCH v5 12/12] clk: rockchip: rk3568: Use assigned VPLL clock when possible   Dang Huynh
• [PATCH 0/2] sunxi: Add NetCube Systems Kumquat support and fix nvmem MAC handling   Lukas Schmid
• [PATCH 1/2] sunxi: setup_environment: do not generate a MAC address when one is set using nvmem-cells   Lukas Schmid
• [PATCH 2/2] configs: add support for NetCube Systems Kumquat   Lukas Schmid
  • [PATCH 2/2] configs: add support for NetCube Systems Kumquat   Andre Przywara
• [PATCH v4 4/4] efi: add EFI_DEBUG_IMAGE_INFO for debug   Heinrich Schuchardt
• [PATCH 0/9] Support stm32h747-discovery board   Dario Binacchi
  • [PATCH 1/9] ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles   Dario Binacchi
    • [PATCH 1/9] ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles   Patrice CHOTARD
    • [PATCH 1/9] ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles   Sumit Garg
      • [PATCH 1/9] ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles   Patrice CHOTARD
      • [PATCH 1/9] ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles   Dario Binacchi
  • [PATCH 2/9] dt-bindings: arm: stm32: add compatible for stm32h747i-disco board   Dario Binacchi
    • [PATCH 2/9] dt-bindings: arm: stm32: add compatible for stm32h747i-disco board   Patrice CHOTARD
  • [PATCH 3/9] dt-bindings: clock: stm32h7: rename USART{7, 8}_CK to UART{7, 8}_CK   Dario Binacchi
    • [PATCH 3/9] dt-bindings: clock: stm32h7: rename USART{7, 8}_CK to UART{7,8}_CK   Patrice CHOTARD
  • [PATCH 4/9] ARM: dts: stm32: add uart8 node for stm32h743 MCU   Dario Binacchi
    • [PATCH 4/9] ARM: dts: stm32: add uart8 node for stm32h743 MCU   Patrice CHOTARD
  • [PATCH 5/9] ARM: dts: stm32: add pin map for UART8 controller on stm32h743   Dario Binacchi
    • [PATCH 5/9] ARM: dts: stm32: add pin map for UART8 controller on stm32h743   Patrice CHOTARD
  • [PATCH 6/9] ARM: dts: stm32: add an extra pin map for USART1 on stm32h743   Dario Binacchi
    • [PATCH 6/9] ARM: dts: stm32: add an extra pin map for USART1 on stm32h743   Patrice CHOTARD
  • [PATCH 7/9] ARM: dts: stm32: support STM32h747i-disco board   Dario Binacchi
    • [PATCH 7/9] ARM: dts: stm32: support STM32h747i-disco board   Patrice CHOTARD
  • [PATCH 8/9] ARM: dts: stm32: add stm32h747i-disco-u-boot DTS file   Dario Binacchi
    • [PATCH 8/9] ARM: dts: stm32: add stm32h747i-disco-u-boot DTS file   Patrice CHOTARD
  • [PATCH 9/9] board: stm32: add stm32h747-discovery board support   Dario Binacchi
    • [PATCH 9/9] board: stm32: add stm32h747-discovery board support   Patrice CHOTARD
      • [PATCH 9/9] board: stm32: add stm32h747-discovery board support   Lukasz Majewski
      • [PATCH 9/9] board: stm32: add stm32h747-discovery board support   Patrice CHOTARD
      • [Uboot-stm32] [PATCH 9/9] board: stm32: add stm32h747-discovery board support   Patrice CHOTARD
      • [PATCH 9/9] board: stm32: add stm32h747-discovery board support   Lukasz Majewski
  • [PATCH 0/9] Support stm32h747-discovery board   Patrice CHOTARD
    • [PATCH 0/9] Support stm32h747-discovery board   Sumit Garg
      • [PATCH 0/9] Support stm32h747-discovery board   Dario Binacchi
      • [PATCH 0/9] Support stm32h747-discovery board   Sumit Garg
      • [PATCH 0/9] Support stm32h747-discovery board   Tom Rini
      • [PATCH 0/9] Support stm32h747-discovery board   Sumit Garg
      • [PATCH 0/9] Support stm32h747-discovery board   Tom Rini
      • [PATCH 0/9] Support stm32h747-discovery board   Sumit Garg
      • [PATCH 0/9] Support stm32h747-discovery board   Tom Rini
      • [PATCH 0/9] Support stm32h747-discovery board   Sumit Garg
      • [PATCH 0/9] Support stm32h747-discovery board   Quentin Schulz
      • [PATCH 0/9] Support stm32h747-discovery board   Tom Rini
• [PATCH v4 1/4] efi: add EFI_SYSTEM_TABLE_POINTER for debug   Heinrich Schuchardt
  • [PATCH v4 1/4] efi: add EFI_SYSTEM_TABLE_POINTER for debug   Heinrich Schuchardt
  • [PATCH v4 1/4] efi: add EFI_SYSTEM_TABLE_POINTER for debug   Heinrich Schuchardt
• [PATCH 1/1] pylibfdt: correct license information   Heinrich Schuchardt
  • [PATCH 1/1] pylibfdt: correct license information   Tom Rini
  • [PATCH 1/1] pylibfdt: correct license information   Bryan Brattlof
  • [PATCH 1/1] pylibfdt: correct license information   Tom Rini
  • [PATCH 1/1] pylibfdt: correct license information   Quentin Schulz
    • [PATCH 1/1] pylibfdt: correct license information   Heinrich Schuchardt
      • [PATCH 1/1] pylibfdt: correct license information   Quentin Schulz
      • [PATCH 1/1] pylibfdt: correct license information   Heinrich Schuchardt
• [PATCH 0/3] sandbox: align LMB memory   Heinrich Schuchardt
  • [PATCH 1/3] sandbox: fix dram_init()   Heinrich Schuchardt
  • [PATCH 2/3] sandbox: align LMB memory   Heinrich Schuchardt
    • [PATCH 2/3] sandbox: align LMB memory   Tom Rini
  • [PATCH 3/3] test: unit test for efi_alloc_aligned_pages()   Heinrich Schuchardt
• [PATCH 3/3] net: consolidate PXE processor architecture type Kconfig   Heinrich Schuchardt
  • [PATCH 1/3] verdin-am62p: include linux/sizes.h   Heinrich Schuchardt
    • [PATCH 1/3] verdin-am62p: include linux/sizes.h   Francesco Dolcini
  • [PATCH 2/3] cmd: remove duplicate DHCPv6 Kconfig definitions   Heinrich Schuchardt
    • [PATCH 2/3] cmd: remove duplicate DHCPv6 Kconfig definitions   Quentin Schulz
  • [PATCH 3/3] net: consolidate PXE processor architecture type Kconfig   Heinrich Schuchardt
• [PATCH] rockchip: rk3328: Fix Synchronous Abort on usb start   Alex Shumsky
• [MASTER]Pull request doc-2025-07-rc4   Heinrich Schuchardt
  • [MASTER]Pull request doc-2025-07-rc4   Tom Rini
• Away for a while   Simon Glass
• [PATCH 1/2] include/dt-bindings: Remove unused headers   Tom Rini
• [PATCH 1/2] include/dt-bindings: Remove functionally identical headers   Tom Rini
• [PATCH] include/dt-bindings/reset: Remove local version of bcm6318-reset.h   Tom Rini
• [PATCH] include/dt-bindings: Remove headers we can safely upgrade   Tom Rini
• [PATCH 0/7] Remove as much arch/arm/dts/*.h as possible   Tom Rini
• [PATCH] rockchip: board: assign up to 3 static Ethernet MAC addresses   MichaIng
  • [PATCH] rockchip: board: assign up to 3 static Ethernet MAC addresses   Quentin Schulz
    • [PATCH] rockchip: board: assign up to 3 static Ethernet MAC addresses   MichaIng
      • [PATCH] rockchip: board: assign up to 3 static Ethernet MAC addresses   Quentin Schulz
• [PATCH v4 0/5] linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15 + winbond   Christian Marangi
  • [PATCH v4 1/5] clk: imx: add missing linux/bug.h header for WARN   Christian Marangi
  • [PATCH v4 2/5] iommu: qcom-smmu: add missing linux/bug.h header for WARN_ON   Christian Marangi
  • [PATCH v4 3/5] arm: apple: rtkit: add missing header linux/bug.h and linux/bitops.h   Christian Marangi
  • [PATCH v4 4/5] linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15   Christian Marangi
  • [PATCH v4 5/5] mtd: spinand: winbond: add Winbond W25N04KV flash support   Christian Marangi
  • [PATCH v4 0/5] linux/bitfield.h: sync <linux/bitfield.h> from Linux 6.15 + winbond   Tom Rini
• [PATCH] drivers: clk: mtk: Decouple MediaTek clock drivers from SoC   Alicja Michalska
• Pull request: u-boot-rockchip-20250606   Kever Yang
  • Pull request: u-boot-rockchip-20250606   Tom Rini
• [PATCH v2 0/3] net: consolidate PXE processor architecture type Kconfig   Heinrich Schuchardt
  • [PATCH v2 1/3] verdin-am62p: include linux/sizes.h   Heinrich Schuchardt
    • [PATCH v2 1/3] verdin-am62p: include linux/sizes.h   Francesco Dolcini
    • [PATCH v2 1/3] verdin-am62p: include linux/sizes.h   Tom Rini
  • [PATCH v2 2/3] cmd: remove duplicate DHCPv6 Kconfig definitions   Heinrich Schuchardt
    • [PATCH v2 2/3] cmd: remove duplicate DHCPv6 Kconfig definitions   Tom Rini
    • [PATCH v2 2/3] cmd: remove duplicate DHCPv6 Kconfig definitions   Ilias Apalodimas
  • [PATCH v2 3/3] net: consolidate PXE processor architecture type Kconfig   Heinrich Schuchardt
    • [PATCH v2 3/3] net: consolidate PXE processor architecture type Kconfig   Tom Rini
    • [PATCH v2 3/3] net: consolidate PXE processor architecture type Kconfig   Ilias Apalodimas
      • [PATCH v2 3/3] net: consolidate PXE processor architecture type Kconfig   Heinrich Schuchardt
• [PATCH v2 0/3] sandbox: align LMB memory   Heinrich Schuchardt
  • [PATCH v2 1/3] sandbox: fix dram_init()   Heinrich Schuchardt
    • [PATCH v2 1/3] sandbox: fix dram_init()   Ilias Apalodimas
  • [PATCH v2 2/3] sandbox: align LMB memory   Heinrich Schuchardt
    • [PATCH v2 2/3] sandbox: align LMB memory   Tom Rini
    • [PATCH v2 2/3] sandbox: align LMB memory   Ilias Apalodimas
  • [PATCH v2 3/3] test: unit test for efi_alloc_aligned_pages()   Heinrich Schuchardt
    • [PATCH v2 3/3] test: unit test for efi_alloc_aligned_pages()   Ilias Apalodimas
• [PATCH 0/2] drivers/spi/airoha_snfi_spi: add support of dual/quad wires spi modes   Mikhail Kshevetskiy
  • [PATCH 1/2] drivers/spi/airoha_snfi_spi: remove unnecessary operation adjust_op_size   Mikhail Kshevetskiy
  • [PATCH 2/2] drivers/spi/airoha_snfi_spi: add support of dual/quad wires spi modes   Mikhail Kshevetskiy
  • [PATCH v2 0/3] drivers/spi/airoha_snfi_spi: dual/quad wires modes, dma   Mikhail Kshevetskiy
    • [PATCH v2 1/3] drivers/spi/airoha_snfi_spi: remove unnecessary operation adjust_op_size   Mikhail Kshevetskiy
    • [PATCH v2 2/3] drivers/spi/airoha_snfi_spi: add support of dual/quad wires spi modes   Mikhail Kshevetskiy
    • [PATCH v2 3/3] drivers/spi/airoha_snfi_spi: add dma support   Mikhail Kshevetskiy
• [PATCH] ARM: dts: renesas: Drop most of bootph-* tags   Marek Vasut
  • [PATCH] ARM: dts: renesas: Drop most of bootph-* tags   Sumit Garg
• [PATCH] arm64: dts: renesas: Clean up sysinfo EEPROM DT description on R-Car Gen3   Marek Vasut
• [PATCH 0/2 v2] Propagate bootph-all and bootph-some-ram property to all supernodes   Moteen Shah
• [v2 PULL] u-boot-riscv/next   Leo Liang
  • [v2 PULL] u-boot-riscv/next   Tom Rini
• [PATCH v3 0/4] Add IPC support on MCU R5F cluster in Split Mode   Beleswar Padhi
  • [PATCH v3 1/4] arm: mach-k3: {am6/j7}*_hardware.h: Expose MCU R5 proc and device ids   Beleswar Padhi
  • [PATCH v3 2/4] arch: mach-k3: common: Add support to shutdown MCU R5 Core 1   Beleswar Padhi
  • [PATCH v3 3/4] remoteproc: k3-r5: Acquire processor control before reset ops   Beleswar Padhi
  • [PATCH v3 4/4] board: ti: j7*: Add firmware for MCU R5 core1   Beleswar Padhi
• [PATCH v2 0/6] Print version of the DM firmware   Moteen Shah
  • [PATCH v2 1/6] ti_sci_*: Add utility to access tisci firmware and SOC capability   Moteen Shah
  • [PATCH v2 2/6] ti_sci_* : Add capability to access DM firmware's metadata   Moteen Shah
  • [PATCH v2 3/6] firmware: ti_sci.c: Add a function to query DM firmware's capability   Moteen Shah
  • [PATCH v2 4/6] firmware: ti_sci.c: Add a function to request DM metadata using ti_sci* calls   Moteen Shah
  • [PATCH v2 5/6] arm: mach-k3: Add a function for printing DM version   Moteen Shah
  • [PATCH v2 6/6] arm: mach-k3: Print version of DM firmware during boot process   Moteen Shah
• [PATCH v4] stm32mp: Add tamp_nvram driver   Patrice CHOTARD
• [PATCH v2 00/13] stm32mp25: Add clock and reset drivers support   Patrice CHOTARD
• [PATCH] ARM: stm32: Drop unnecessary space   Patrice CHOTARD
• [PATCH] ARM: stm32: Fix SYSRAM size on STM32MP13xx   Patrice CHOTARD
• [PATCH] ARM: stm32: Fix DBGMCU macro on STM32MP13xx   Patrice CHOTARD
• [PATCH] ARM: stm32: Auto-detect ROM API table on STM32MP15xx   Patrice CHOTARD
• [PATCH] clk: stm32mp13: Fix typo in STM32MP13 RCC driver   Patrice CHOTARD
• [PATCH] clk: stm32mp13: Add SPL support and clock tree init to STM32MP13 RCC driver   Patrice CHOTARD
  • [PATCH] clk: stm32mp13: Add SPL support and clock tree init to STM32MP13 RCC driver   Patrice CHOTARD
• [PATCH] ram: stm32mp1: Add STM32MP13xx support   Patrice CHOTARD
• [PATCH] tools: stm32image: Add support for STM32 Image V2.0   Patrice CHOTARD
• [PATCH v4 0/3] Add support for K3 BIST   Neha Malcom Francis
  • [PATCH v4 1/3] drivers: misc: k3_bist: Add K3 BIST driver   Neha Malcom Francis
    • [PATCH v4 1/3] drivers: misc: k3_bist: Add K3 BIST driver   Manorit Chawdhry
      • [PATCH v4 1/3] drivers: misc: k3_bist: Add K3 BIST driver   Neha Malcom Francis
      • [PATCH v4 1/3] drivers: misc: k3_bist: Add K3 BIST driver   Manorit Chawdhry
  • [PATCH v4 2/3] arm: mach-k3: j784s4_init: Trigger LBIST and PBIST on MAIN R5 2_0   Neha Malcom Francis
    • [PATCH v4 2/3] arm: mach-k3: j784s4_init: Trigger LBIST and PBIST on MAIN R5 2_0   Manorit Chawdhry
      • [PATCH v4 2/3] arm: mach-k3: j784s4_init: Trigger LBIST and PBIST on MAIN R5 2_0   Neha Malcom Francis
      • [PATCH v4 2/3] arm: mach-k3: j784s4_init: Trigger LBIST and PBIST on MAIN R5 2_0   Manorit Chawdhry
  • [PATCH v4 3/3] DONOTMERGE: arm: dts: k3-j784s4-j742s2-main-common: Add PBIST_14 node   Neha Malcom Francis
• [PATCH 1/7] scripts/Makefile.lib: Rework upstream_dtsi_include to use find   Sumit Garg
  • [PATCH 1/7] scripts/Makefile.lib: Rework upstream_dtsi_include to use find   Tom Rini
• ums command broken since commit c5d685b8993c ("usb: dwc2: Unify flush and reset logic with v4.20a support")   Patrice CHOTARD
• [PATCH] Gitlab: Allow running sandbox test.py jobs on more hosts   Tom Rini
• Searching and Finding boot.scr and uboot.env on a Raspberry Pi 4   Marc Haber
  • Searching and Finding boot.scr and uboot.env on a Raspberry Pi 4   Quentin Schulz
    • Searching and Finding boot.scr and uboot.env on a Raspberry Pi 4   Marc Haber
      • Searching and Finding boot.scr and uboot.env on a Raspberry Pi 4   Quentin Schulz
      • Searching and Finding boot.scr and uboot.env on a Raspberry Pi 4   Marc Haber
• [PATCH v2 0/8] Consistent Kconfig environment options CONFIG_ENV_ prefix   Marek Vasut
  • [PATCH v2 1/8] env: Rename OVERWRITE_ETHADDR_ONCE to ENV_OVERWRITE_ETHADDR_ONCE   Marek Vasut
  • [PATCH v2 2/8] env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDANT   Marek Vasut
  • [PATCH v2 3/8] env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDR   Marek Vasut
  • [PATCH v2 4/8] env: Rename SYS_MMC_ENV_DEV to ENV_MMC_DEVICE_INDEX   Marek Vasut
  • [PATCH v2 5/8] env: Rename SYS_MMC_ENV_PART to ENV_MMC_EMMC_HW_PARTITION   Marek Vasut
  • [PATCH v2 6/8] env: Rename ENV_MMC_PARTITION to ENV_MMC_SW_PARTITION   Marek Vasut
  • [PATCH v2 7/8] env: Rename DEFAULT_ENV_FILE to ENV_DEFAULT_ENV_TEXT_FILE   Marek Vasut
  • [PATCH v2 8/8] env: Drop DELAY_ENVIRONMENT   Marek Vasut
• [PATCH v9 0/1] *** Initial Wiznet W5500 support ***   verdun at hpe.com
• [PATCH v9 1/1] Initial support for Wiznet W5500   verdun at hpe.com
• [ANN] U-Boot v2025.07-rc4 released   Tom Rini
  • [ANN] U-Boot v2025.07-rc4 released   Tom Rini
• [PATCH V2] rockchip: Add support for GameForce Ace   Chris Morgan
• [PATCH v2 0/2] sunxi: Add NetCube Systems Kumquat support and fix nvmem MAC handling   Lukas Schmid
  • [PATCH v2 2/2] configs: add support for NetCube Systems Kumquat   Lukas Schmid
• [PATCH v2 1/2] sunxi: setup_environment: do not generate a MAC address when one is set using nvmem-cells   Lukas Schmid
• [PATCH v4 0/5] mkimage: validate image references in FIT configurations   Aristo Chen
  • [PATCH v4 1/5] tools: mkimage: propagate error codes from fit_handle_file()   Aristo Chen
  • [PATCH v4 2/5] tools: mkimage: validate image references in FIT configurations   Aristo Chen
  • [PATCH v4 3/5] binman: test: Ensure all config references exist in /images node   Aristo Chen
  • [PATCH v4 4/5] test: py: add mkimage test for undefined image references in FIT configs   Aristo Chen
  • [PATCH v4 5/5] arm: dts: phycore-am62x: Add missing tifsstub image nodes for FIT loadables   Aristo Chen
• [PATCH v3 0/5] Extend usb_onboard_hub driver to support Cypress HX3 hub family   Lukasz Czechowski
  • [PATCH v3 1/5] usb: onboard-hub: Use the ofnode to check if the peer-hub was probed   Lukasz Czechowski
  • [PATCH v3 2/5] usb: onboard-hub: Use devm API do automatically free the reset GPIO   Lukasz Czechowski
  • [PATCH v3 3/5] usb: onboard-hub: Set the reset gpio pin before freeing   Lukasz Czechowski
  • [PATCH v3 4/5] usb: onboard-hub: Add support for multiple power supplies   Lukasz Czechowski
  • [PATCH v3 5/5] usb: onboard-hub: Add support for Cypress HX3 family   Lukasz Czechowski
• [PATCH v2] usb: onboard-hub: Fix return type for regulator APIs   Michal Simek
• [PATCH v1] board: qualcomm: Add MAINTAINERS entries for Dragonwing platforms   Aswin Murugan
  • [PATCH v1] board: qualcomm: Add MAINTAINERS entries for Dragonwing platforms   Casey Connolly
    • [PATCH v1] board: qualcomm: Add MAINTAINERS entries for Dragonwing platforms   Varadarajan Narayanan
    • [PATCH v1] board: qualcomm: Add MAINTAINERS entries for Dragonwing platforms   Balaji Selvanathan
  • [PATCH v1] board: qualcomm: Add MAINTAINERS entries for Dragonwing platforms   Krzysztof Kozlowski
• [PATCH v3] rockchip: px30/rk3326: Implement checkboard() to print SoC variant   Quentin Schulz
• [RFC PATCH v1] usb: xhci: fix crash with arm64 QEMU and KVM   Jerome Forissier
• [PATCH] binman: migrate from pkg_resources to importlib   Yannic Moog
  • [PATCH] binman: migrate from pkg_resources to importlib   Bryan Brattlof
• [PATCH v2] mkimage: do a rough estimate for the size needed for hashes/signatures   Rasmus Villemoes
• [PATCH] pylibfdt: correct license information (further)   Quentin Schulz
• riscv: start on work to allow big-endian build   Ben Dooks
  • [PATCH 1/2] riscv: add build support for big-endian   Ben Dooks
    • [PATCH 1/2] riscv: add build support for big-endian   Tom Rini
• [PATCH 2/2] riscv: byteorder: add test for big-endian   Ben Dooks
  • [PATCH 2/2] riscv: byteorder: add test for big-endian   Tom Rini
    • [PATCH 2/2] riscv: byteorder: add test for big-endian   Ben Dooks
• [PATCH v2] mach-k3: mmu: add dynamic carveouts for MMU table   Anshul Dalal
  • [PATCH v2] mach-k3: mmu: add dynamic carveouts for MMU table   Andrew Davis
• [PATCH 0/3] Set fdtfile variable from DT   Casey Connolly
  • [PATCH 1/3] dts/upstream: write fdtfile path to /chosen/fdtfile   Casey Connolly
    • [PATCH 1/3] dts/upstream: write fdtfile path to /chosen/fdtfile   Mark Kettenis
      • [PATCH 1/3] dts/upstream: write fdtfile path to /chosen/fdtfile   Casey Connolly
    • [PATCH 1/3] dts/upstream: write fdtfile path to /chosen/fdtfile   Tom Rini
  • [PATCH 2/3] env: set fdtfile environment variable from /chosen/fdtfile   Casey Connolly
    • [PATCH 2/3] env: set fdtfile environment variable from /chosen/fdtfile   Quentin Schulz
      • [PATCH 2/3] env: set fdtfile environment variable from /chosen/fdtfile   Casey Connolly
  • [PATCH 3/3] mach-snapdragon: skip setting fdtfile if already set   Casey Connolly
  • [PATCH 0/3] Set fdtfile variable from DT   E Shattow
• [PATCH v1 0/1] Enhance soft spi performance   verdun at hpe.com
  • [PATCH v1 1/1] soft_spi performance enhancement   verdun at hpe.com
    • [PATCH v1 1/1] soft_spi performance enhancement   neil.armstrong at linaro.org
• [PATCH v2 0/3] Qualcomm: implement support for GENI firmware loading   Casey Connolly
  • [PATCH v2 1/3] i2c: geni: fix error message wording in clk_disable   Casey Connolly
    • [PATCH v2 1/3] i2c: geni: fix error message wording in clk_disable   Heiko Schocher
  • [PATCH v2 2/3] misc: introduce Qcom GENI wrapper   Casey Connolly
    • [PATCH v2 2/3] misc: introduce Qcom GENI wrapper   Tom Rini
      • [PATCH v2 2/3] misc: introduce Qcom GENI wrapper   Casey Connolly
  • [PATCH v2 3/3] i2c: geni: load firmware if required   Casey Connolly
• [PATCH] Qualcomm: maintain trogdor so CI passes   Casey Connolly
  • [PATCH] Qualcomm: maintain trogdor so CI passes   neil.armstrong at linaro.org
• [PATCH 0/2] arm64: dts: rockchip: roc-3328-cc use 1600 ddr4   Christian Hewitt
  • [PATCH 1/2] ram: rk3328: add ddr4-1600 sdram timing   Christian Hewitt
  • [PATCH 2/2] arm64: dts: rockchip: roc-3328-cc: use 1600 ddr4 timing   Christian Hewitt
  • [PATCH 0/2] arm64: dts: rockchip: roc-3328-cc use 1600 ddr4   Chen-Yu Tsai
• Pull request for tpm-next-10062025   Ilias Apalodimas
  • Pull request for tpm-next-10062025   Tom Rini
• [PULL] u-boot-sh/master   Marek Vasut
  • [PULL] u-boot-sh/master   Tom Rini
• [PATCH v4 0/2] renesas: Renesas R-Car Gen4 watchdog driver   Shmuel Leib Melamud via B4 Relay
• [PATCH v4 1/2] clk: renesas: Handle CLK_TYPE_GEN4_MDSEL in gen3_clk_get_rate64()   Shmuel Leib Melamud via B4 Relay
  • [PATCH v4 1/2] clk: renesas: Handle CLK_TYPE_GEN4_MDSEL in gen3_clk_get_rate64()   Stefan Roese
• [PATCH v4 2/2] renesas: Renesas R-Car Gen4 watchdog driver   Shmuel Leib Melamud via B4 Relay
  • [PATCH v4 2/2] renesas: Renesas R-Car Gen4 watchdog driver   Stefan Roese
  • [PATCH v4 2/2] renesas: Renesas R-Car Gen4 watchdog driver   Marek Vasut
• [PATCH v5 0/4] Add EFI Debug Support Table feature   Ying-Chun Liu (PaulLiu)
  • [PATCH v5 1/4] efi: add EFI_SYSTEM_TABLE_POINTER for debug   Ying-Chun Liu (PaulLiu)
  • [PATCH v5 2/4] efi: add EFI_DEBUG_IMAGE_INFO_TABLE for debug   Ying-Chun Liu (PaulLiu)
  • [PATCH v5 3/4] lib: efi_loader: efi_memory.c: add efi_realloc() for realloc memory   Ying-Chun Liu (PaulLiu)
  • [PATCH v5 4/4] efi: add EFI_DEBUG_IMAGE_INFO for debug   Ying-Chun Liu (PaulLiu)
• [PATCH v1] dfu: fix dev_part_str for file operations   Lukasz Majewski
  • [PATCH v1] dfu: fix dev_part_str for file operations   Ivan Pang
    • [PATCH v1] dfu: fix dev_part_str for file operations   Mattijs Korpershoek
• [PATCH 4/4] usb: gadget: Introduce usb gadget vendor/product default id for ARCH_QCOM   Casey Connolly
• [PATCH 0/3] rockchip: ringneck-px30: anticipate breakage with v6.16-rc1 DT   Quentin Schulz
  • [PATCH 1/3] arm64: dts: rockchip: add basic mdio node to px30   Quentin Schulz
    • [PATCH 1/3] arm64: dts: rockchip: add basic mdio node to px30   Sumit Garg
  • [PATCH 2/3] arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck   Quentin Schulz
    • [PATCH 2/3] arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck   Sumit Garg
  • [PATCH 3/3] configs: ringneck-px30: fix Ethernet   Quentin Schulz
• [PATCH v2] board: qualcomm: Add MAINTAINERS entries for Dragonwing platforms   Aswin Murugan
  • [PATCH v2] board: qualcomm: Add MAINTAINERS entries for Dragonwing platforms   Balaji Selvanathan
• [PULL] Pull request for u-boot next / v2025.10 = u-boot-stm32-20250611   Patrice CHOTARD
  • [PULL] Pull request for u-boot next / v2025.10 = u-boot-stm32-20250611   Tom Rini
• [PATCH] mmc: Kconfig: Correct dependencies SDHCI ADMA options   Heiko Thiery
  • [PATCH] mmc: Kconfig: Correct dependencies SDHCI ADMA options   Tom Rini
• [PATCH] rk3288: add fdtoverlay_addr_r to default env   Marius Dinu
  • [PATCH] rk3288: add fdtoverlay_addr_r to default env   Quentin Schulz
• [PATCH v3 0/3] Implement reset to EDL for qcs9100   Casey Connolly
  • [PATCH v3 0/3] Implement reset to EDL for qcs9100   Varadarajan Narayanan
    • [PATCH v3 0/3] Implement reset to EDL for qcs9100   Casey Connolly
      • [PATCH v3 0/3] Implement reset to EDL for qcs9100   Varadarajan Narayanan
• [PATCH 0/3] Update Qualcomm generic boards doc page   Casey Connolly
  • [PATCH 0/3] Update Qualcomm generic boards doc page   Luca Weiss
    • [PATCH 1/3] doc: board/qualcomm: Fix commands for compilation missing CROSS_COMPILE   Luca Weiss
    • [PATCH 2/3] doc: board/qualcomm: Replace buildman build instructions   Luca Weiss
    • [PATCH 3/3] doc: board/qualcomm: Add example for boot image version 2   Luca Weiss
• [PATCH 0/2] Fix variable name of msm_clk_data in two drivers   Sumit Garg
  • [PATCH 0/2] Fix variable name of msm_clk_data in two drivers   Luca Weiss
    • [PATCH 1/2] clk/qcom: sc7280: Fix variable name of msm_clk_data   Luca Weiss
    • [PATCH 2/2] clk/qcom: sm8250: Fix variable name of msm_clk_data   Luca Weiss
      • [PATCH 2/2] clk/qcom: sm8250: Fix variable name of msm_clk_data   Alexey Minnekhanov
      • [PATCH 2/2] clk/qcom: sm8250: Fix variable name of msm_clk_data   Luca Weiss
      • [PATCH 2/2] clk/qcom: sm8250: Fix variable name of msm_clk_data   Casey Connolly
    • [PATCH 0/2] Fix variable name of msm_clk_data in two drivers   Casey Connolly
• [PATCH] cmd: add "config" command dependency on gzip   Marius Dinu
  • [PATCH] cmd: add "config" command dependency on gzip   Quentin Schulz
• [PATCH] mmc: Kconfig: Really correct dependencies SDHCI ADMA options   Tom Rini
  • [PATCH] mmc: Kconfig: Really correct dependencies SDHCI ADMA options   Peng Fan
  • [PATCH] mmc: Kconfig: Really correct dependencies SDHCI ADMA options   Tom Rini
    • [PATCH] mmc: Kconfig: Really correct dependencies SDHCI ADMA options   Heiko Thiery
• [PATCH] usb: gadget: musb: Fix duplicate ops assignment in ti_musb_peripheral   Kory Maincent
  • [PATCH] usb: gadget: musb: Fix duplicate ops assignment in ti_musb_peripheral   Mattijs Korpershoek
• [PATCH -next 0/5] add a few entries into missing-blob-help   Bryan Brattlof
• [PATCH -next 1/5] binman: alphabetize missing-blob entries   Bryan Brattlof
  • [PATCH -next 1/5] binman: alphabetize missing-blob entries   Anshul Dalal
• [PATCH -next 2/5] binman: add ti-dm entry to missing-blob-help   Bryan Brattlof
  • [PATCH -next 2/5] binman: add ti-dm entry to missing-blob-help   Anshul Dalal
• [PATCH -next 3/5] binman: add sysfw-inner-cert to missing-blob-help   Bryan Brattlof
  • [PATCH -next 3/5] binman: add sysfw-inner-cert to missing-blob-help   Anshul Dalal
    • [PATCH -next 3/5] binman: add sysfw-inner-cert to missing-blob-help   Bryan Brattlof
• [PATCH -next 4/5] binman: allow '.' to be included in the missing blob tags   Bryan Brattlof
• [PATCH -next 5/5] binmain: include ti-fs-enc.bin into missing-blob-help   Bryan Brattlof
• [PATCH 1/2] Revert "arm64: dts: add NXP i.MX91 device tree"   Tom Rini
• [PATCH 2/2] imx: imx91_evk: Remove for now   Tom Rini
  • [PATCH 2/2] imx: imx91_evk: Remove for now   Peng Fan
    • [PATCH 2/2] imx: imx91_evk: Remove for now   Tom Rini
• [PATCH v2 00/13] Update the kbuild system to 5.1   Ilias Apalodimas
  • [PATCH v2 01/13] kbuild: add -fno-PIE flag unconditionally   Ilias Apalodimas
  • [PATCH v2 02/13] kbuild: add -Werror=implicit-int flag unconditionally   Ilias Apalodimas
  • [PATCH v2 03/13] kbuild: use assignment instead of define ... endef for filechk_* rules   Ilias Apalodimas
  • [PATCH v2 04/13] kbuild: clang: choose GCC_TOOLCHAIN_DIR not on LD   Ilias Apalodimas
  • [PATCH v2 05/13] kbuild: use -Werror=implicit-... instead of -Werror-implicit-...   Ilias Apalodimas
  • [PATCH v2 06/13] kbuild: gitignore output directory   Ilias Apalodimas
  • [PATCH v2 07/13] kbuild: remove meaningless prepare2 target   Ilias Apalodimas
  • [PATCH v2 08/13] gcc-9: silence 'address-of-packed-member' warning   Ilias Apalodimas
  • [PATCH v2 09/13] kbuild: do not overwrite .gitignore in output directory   Ilias Apalodimas
  • [PATCH v2 10/13] kbuild: skip parsing pre sub-make code for recursion   Ilias Apalodimas
  • [PATCH v2 11/13] kbuild: mark prepare0 as PHONY to fix external module build   Ilias Apalodimas
  • [PATCH v2 12/13] kbuild: make 'archprepare' depend on 'scripts'   Ilias Apalodimas
  • [PATCH v2 13/13] kbuild: fix single target build for external module   Ilias Apalodimas
  • [PATCH v2 00/13] Update the kbuild system to 5.1   Tom Rini
• [PATCH 0/2] dm: core: use {s,u}32 instead of int for dev_read_{s,u}32_default   Tom Rini
• [PATCH] imx91: Drop OF_UPSTREAM   Peng Fan (OSS)
  • [PATCH] imx91: Drop OF_UPSTREAM   Sumit Garg
  • [PATCH] imx91: Drop OF_UPSTREAM   Tom Rini
• [EXT] [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Paweł Kochanowski
• [PATCH v4 0/7] lmb: use a single API for all allocations   Sughosh Ganu
  • [PATCH v4 1/7] lmb: replace lmb_reserve() and lmb_alloc_addr() API's   Sughosh Ganu
  • [PATCH v4 2/7] lmb: replace the lmb_alloc() and lmb_alloc_base() API's   Sughosh Ganu
  • [PATCH v4 3/7] lmb: staticise lmb_add_memory()   Sughosh Ganu
  • [PATCH v4 4/7] lmb: use a single function to free up memory   Sughosh Ganu
  • [PATCH v4 5/7] lmb: use a single function to check for allocation and reservation requests   Sughosh Ganu
  • [PATCH v4 6/7] mach-snapdragon: add a check before copying FDT to fdt_addr_r   Sughosh Ganu
  • [PATCH v4 7/7] doc: add lmb documentation   Sughosh Ganu
• [PATCH v1] arch: arm: agilex5: Enable power manager for Agilex5   alif.zakuan.yuslaimi at altera.com
• [PATCH] spl: Add support for Device Firmware Upgrade (DFU) over PCIe   Hrushikesh Salunke
  • [PATCH] spl: Add support for Device Firmware Upgrade (DFU) over PCIe   Tom Rini
• [PATCH 0/2] Add TI K3 PCIe Endpoint Controller support for AM64X   Hrushikesh Salunke
  • [PATCH 1/2] pci_endpoint: Add TI K3 Cadence PCIe Endpoint Controller driver   Hrushikesh Salunke
    • [PATCH 1/2] pci_endpoint: Add TI K3 Cadence PCIe Endpoint Controller driver   Tom Rini
  • [PATCH 2/2] configs: am64x_evm_a53_defconfig: Enable configs for PCI Endpoint mode   Hrushikesh Salunke
• [PATCH 0/3] Add PCIe boot support on TI AM64X SoC   Hrushikesh Salunke
  • [PATCH 1/3] arm: mach-k3: am64x: Add PCIe device as a boot media   Hrushikesh Salunke
  • [PATCH 2/3] configs: am64x_evm_r5_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
    • [PATCH 2/3] configs: am64x_evm_r5_defconfig: Enable configs for PCIe boot   Tom Rini
  • [PATCH 3/3] configs: am64x_evm_a53_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
• [PATCH, v2] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels   牛 志宏
  • [PATCH, v2] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels   Tom Rini
  • [PATCH, v2] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels   牛 志宏
• Aw: [U-Boot, v1, 1/1] net: phy: Add the Airoha EN8811H PHY driver   frank-w at public-files.de
  • Aw: [U-Boot, v1, 1/1] net: phy: Add the Airoha EN8811H PHY driver   Tom Rini
    • Aw: [U-Boot, v1, 1/1] net: phy: Add the Airoha EN8811H PHY driver   Frank Wunderlich
      • Aw: [U-Boot, v1, 1/1] net: phy: Add the Airoha EN8811H PHY driver   Lucien.Jheng
      • Aw: [U-Boot, v1, 1/1] net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
  • [U-Boot, v1, 1/1] net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
• [PATCH -next v2 0/5] add a few entries into missing-blob-help   Bryan Brattlof
  • [PATCH -next v2 1/5] binman: alphabetize missing-blob entries   Bryan Brattlof
  • [PATCH -next v2 2/5] binman: add ti-dm entry to missing-blob-help   Bryan Brattlof
  • [PATCH -next v2 3/5] binman: add sysfw-inner-cert to missing-blob-help   Bryan Brattlof
  • [PATCH -next v2 5/5] binmain: include ti-fs-enc.bin into missing-blob-help   Bryan Brattlof
• [PATCH -next v2 4/5] binman: allow '.' to be included in the missing blob tags   Bryan Brattlof
• [PATCH 0/5] Convert Lichee Pi 4A to use S-Mode proper U-Boot   Tom Plant
• [PATCH] mach-k3: j722s: enable caches for the SPL stage   Heiko Thiery
  • [PATCH] mach-k3: j722s: enable caches for the SPL stage   Tom Rini
    • [PATCH] mach-k3: j722s: enable caches for the SPL stage   Bryan Brattlof
• [PATCH v3 4/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge CONFIG_SPL_SYS_MALLOC_F_LEN   Hugo Villeneuve
• [PATCH] board: var-som-mx8mn: Fix alloc space exhausted in SPL   Hugo Villeneuve
  • [PATCH] board: var-som-mx8mn: Fix alloc space exhausted in SPL   Fabio Estevam
  • [PATCH] board: var-som-mx8mn: Fix alloc space exhausted in SPL   Tom Rini
• [PATCH] cmd: tlv_eeprom: fix typo errors in comments and error msg   Hugo Villeneuve
• [PATCH] toradex-smarc-imx8mp: add SPL_STACK size and SPL_HAVE_INIT_STACK   Hiago De Franco
  • [PATCH] toradex-smarc-imx8mp: add SPL_STACK size and SPL_HAVE_INIT_STACK   Francesco Dolcini
  • [PATCH] toradex-smarc-imx8mp: add SPL_STACK size and SPL_HAVE_INIT_STACK   Tom Rini
• [PATCH v3 0/7] Qualcomm: teach the build system to emit signed ELF images   Casey Connolly
  • [PATCH v3 1/7] binman: add $(srctree)/tools to toolpath   Casey Connolly
  • [PATCH v3 2/7] binman: support building binman dtb when OF_UPSTREAM is enabled   Casey Connolly
  • [PATCH v3 3/7] tools: add mkmbn tool for Qualcomm   Casey Connolly
  • [PATCH v3 4/7] binman: add support for building Qualcomm signed MBN ELF images   Casey Connolly
  • [PATCH v3 5/7] configs: qualcomm: use fragments for debug UART   Casey Connolly
  • [PATCH v3 6/7] qualcomm: use mkmbn via binman and stop creating ELF files   Casey Connolly
  • [PATCH v3 7/7] doc: board/qualcomm: update docs for new u-boot.mbn target   Casey Connolly
  • [PATCH v3 0/7] Qualcomm: teach the build system to emit signed ELF images   Tom Rini
    • [PATCH v3 0/7] Qualcomm: teach the build system to emit signed ELF images   Casey Connolly
• [PATCH v11 17/21] tools: imx8image: add i.MX95 support   Enric Balletbo i Serra
• [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Jerome Forissier
  • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Tom Rini
    • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Jerome Forissier
      • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Michal Simek
      • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Jerome Forissier
      • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Michal Simek
      • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Jerome Forissier
      • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Michal Simek
      • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Tom Rini
  • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Michal Simek
    • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Jerome Forissier
      • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Michal Simek
      • [RFC PATCH] tools: zynqmp: add build script and documentation for ZynqMP KV260   Jerome Forissier
• [PATCH] arm: zynqmp: Remove local copy of 'dt-bindings/clock/xlnx-zynqmp-clk.h'   Tom Rini
  • [PATCH] arm: zynqmp: Remove local copy of 'dt-bindings/clock/xlnx-zynqmp-clk.h'   Michal Simek
    • [PATCH] arm: zynqmp: Remove local copy of 'dt-bindings/clock/xlnx-zynqmp-clk.h'   Tom Rini
• [PATCH 1/2] test/py: Use the correct fixture name in exception handler   Tom Rini
• [PATCH v1] arm: mach-k3: j784s4: Call do_board_detect() before DDR probing   Tom Rini
  • [PATCH v1] arm: mach-k3: j784s4: Call do_board_detect() before DDR probing   Heiko Thiery
• [PATCH] binman: add atf-bl1 to etypes   Tom Rini
• [PATCH] ext4fs: Fix: Read outside partition error (take 2)   Tom Rini
• [RFC, PATCH] fdt: Make sure there is no stale initrd left   Tom Rini
• [PATCH 0/2] sunxi: add YuzukiHD Chameleon board support   Andre Przywara
  • [PATCH 1/2] arm64: dts: allwinner: h616: add YuzukiHD Chameleon support   Andre Przywara
  • [PATCH 2/2] sunxi: H616: add support for YuzukiHD Chameleon board   Andre Przywara
• [PATCH v4 0/5] Implement reset to EDL for qcs9100   Varadarajan Narayanan
  • [PATCH v4 1/5] arm: psci: Add API to check for support of specific PSCI function   Varadarajan Narayanan
  • [PATCH v4 2/5] drivers: sysreset: Add sysreset op that can take arguments   Varadarajan Narayanan
  • [PATCH v4 3/5] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Varadarajan Narayanan
  • [PATCH v4 4/5] cmd: boot: Add '-edl' option to reset command documentation   Varadarajan Narayanan
  • [PATCH v4 5/5] configs: qcs9100_defconfig: Enable SYSRESET   Varadarajan Narayanan
• [PATCH] phy: cadence: torrent: add support for three or more links using 2 protocols   Hrushikesh Salunke
• [PATCH 0/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Javier Martinez Canillas
  • [PATCH 1/3] disk: efi: Move logic to get a GPT entry into a helper function   Javier Martinez Canillas
  • [PATCH 2/3] disk: efi: expose the part_get_gpt_pte() helper function   Javier Martinez Canillas
  • [PATCH 3/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Javier Martinez Canillas
    • Re: [PATCH 3/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Heinrich Schuchardt
      • [PATCH 3/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Javier Martinez Canillas
      • Re: [PATCH 3/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Heinrich Schuchardt
      • [PATCH 3/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Javier Martinez Canillas
      • [PATCH 3/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Tom Rini
      • [PATCH 3/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Javier Martinez Canillas
      • [PATCH 3/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Tom Rini
      • [PATCH 3/3] efi_loader: disk: add EFI_PARTITION_INFO_PROTOCOL support   Peter Robinson
• [PATCH RFC v2 0/8] Fix handling of optional blobs in binman   Yannic Moog
• [PATCH RFC v2 4/8] binman: replace _entries with GetEntries()   Yannic Moog
• [PATCH RFC v2 5/8] binman: rework dropping absent entries from packaged image   Yannic Moog
• [PATCH RFC v2 7/8] tools: binman: ftest: fix tests that require non-faked ext blobs   Yannic Moog
• [PATCH v3 0/6] Fix handling of optional blobs in binman   Yannic Moog
  • [PATCH v3 5/6] binman: ftest: pass allow_fake_blob to _DoReadFileDtb   Yannic Moog
• [PATCH v3 1/6] binman: drop "faked" return value from check_fake_fname   Yannic Moog
• [PATCH v3 2/6] binman: mark optional missing blobs as absent   Yannic Moog
• [PATCH v3 3/6] binman: rework dropping absent entries from packaged image   Yannic Moog
• [PATCH v3 4/6] binman: add faked optional entry case in CheckForProblems   Yannic Moog
• [PATCH v3 6/6] binman: test: assert optional blobs don't cause non-functionality   Yannic Moog
• [PATCH v2 00/22] am62: IO+DDR resume support   Markus Schneider-Pargmann
  • [PATCH v2 01/22] arm: mach-k3: Remove CANUART IO isolation   Markus Schneider-Pargmann
  • [PATCH v2 02/22] arm: mach-k3: Kconfig: Add symbols for IO+DDR Low Power Mode   Markus Schneider-Pargmann
  • [PATCH v2 03/22] ram: k3-ddrss: Add support for DDR in self-refresh   Markus Schneider-Pargmann
  • [PATCH v2 04/22] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Markus Schneider-Pargmann
  • [PATCH v2 05/22] arm: mach-k3: common: Add CANUART wakeup check helpers   Markus Schneider-Pargmann
  • [PATCH v2 06/22] arm: mach-k3: common: Add lpm_resume_from_ddr   Markus Schneider-Pargmann
  • [PATCH v2 07/22] arm: mach-k3: common: Helper for LPM meta data address from DT   Markus Schneider-Pargmann
  • [PATCH v2 08/22] arm: mach-k3: am62a7_init: Resume on LPM exit   Markus Schneider-Pargmann
  • [PATCH v2 09/22] arm: mach-k3: am62p5_init: Resume on LPM exit   Markus Schneider-Pargmann
  • [PATCH v2 10/22] arm64: dts: ti: k3-am62a7-sk: Enable PWM   Markus Schneider-Pargmann
  • [PATCH v2 11/22] arm64: dts: ti: k3-am6*: Add boot phase flag to support MMC boot   Markus Schneider-Pargmann
  • [PATCH v2 12/22] arm64: dts: ti: k3-am6*: Remove disable-wp for eMMC   Markus Schneider-Pargmann
  • [PATCH v2 13/22] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node   Markus Schneider-Pargmann
  • [PATCH v2 14/22] arm64: dts: ti: k3-am62a-wakeup: Add R5F device node   Markus Schneider-Pargmann
  • [PATCH v2 15/22] arm64: dts: ti: k3-am62a-main: Add C7xv device node   Markus Schneider-Pargmann
  • [PATCH v2 16/22] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors   Markus Schneider-Pargmann
  • [PATCH v2 17/22] arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors   Markus Schneider-Pargmann
  • [PATCH v2 18/22] arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors   Markus Schneider-Pargmann
  • [PATCH v2 19/22] arm: dts: k3-am62a: Add r5 device nodes   Markus Schneider-Pargmann
  • [PATCH v2 20/22] arm: dts: k3-am62p: Add r5 device nodes   Markus Schneider-Pargmann
  • [PATCH v2 21/22] configs: am62ax_evm_r5: Enable IODDR resume support   Markus Schneider-Pargmann
  • [PATCH v2 22/22] configs: am62p_evm_r5_defconfig: Enable IODDR resume support   Markus Schneider-Pargmann
• [PATCH v2 0/3] ti: Add support for eCAP PWM and LCD pin mux   Tom Rini
• Add big-endian build option for riscv   Ben Dooks
• [PATCH v2 1/2] riscv: add build support for big-endian   Ben Dooks
  • [PATCH v2 1/2] riscv: add build support for big-endian   Tom Rini
• [PATCH v2 2/2] riscv: byteorder: add test for big-endian   Ben Dooks
• [PATCH v4 0/8] Qualcomm: teach the build system to emit signed ELF images   Casey Connolly
  • [PATCH v4 1/8] binman: add $(srctree)/tools to toolpath   Casey Connolly
  • [PATCH v4 2/8] binman: support building binman dtb when OF_UPSTREAM is enabled   Casey Connolly
  • [PATCH v4 3/8] tools: qcom: introduce mkmbn library   Casey Connolly
  • [PATCH v4 4/8] tools: qcom: add mkmbn.py   Casey Connolly
  • [PATCH v4 5/8] binman: add support for building Qualcomm signed MBN ELF images   Casey Connolly
  • [PATCH v4 6/8] configs: qualcomm: use fragments for debug UART   Casey Connolly
  • [PATCH v4 7/8] qualcomm: use mkmbn via binman and stop creating ELF files   Casey Connolly
  • [PATCH v4 8/8] doc: board/qualcomm: update docs for new u-boot.mbn target   Casey Connolly
• [PATCH v3 0/5] Qualcomm: implement support for GENI firmware loading   Casey Connolly
  • [PATCH v3 1/5] i2c: geni: fix error message wording in clk_disable   Casey Connolly
  • [PATCH v3 2/5] misc: introduce Qcom GENI wrapper   Casey Connolly
    • [PATCH v3 2/5] misc: introduce Qcom GENI wrapper   Tom Rini
  • [PATCH v3 3/5] i2c: geni: load firmware if required   Casey Connolly
  • [PATCH v3 4/5] clk/qcom: sc7280: add uart7 clocks   Casey Connolly
  • [PATCH v3 5/5] serial: msm-geni: implement firmware loading   Casey Connolly
• (subset) [PATCH v5 00/25] passage: Define a standard for firmware data flow   Tom Rini
• [PATCH] arm: dts: rockchip: Fix eMMC write on RK3528   Jonas Karlman
• [PATCH 0/2] malloc size cleanup for K3 devices   Udit Kumar
  • [PATCH 1/2] Kconfig: Add default malloc size of K3 ARCH   Udit Kumar
    • [PATCH 1/2] Kconfig: Add default malloc size of K3 ARCH   Tom Rini
  • [PATCH 2/2] configs: j7*/*am62*: Remove malloc size overwrite at config level.   Udit Kumar
    • [PATCH 2/2] configs: j7*/*am62*: Remove malloc size overwrite at config level.   Tom Rini
• [PATCH] disable VBE by default   Peter Robinson
• [PATCH] arm64: renesas: Move early SPL stack into System RAM SRAM on R-Car V4H boards   Marek Vasut
• Rpi5 usb boot support   Peter Robinson
• [PATCH 1/2] binman: Add renesas_rcar4_sa0 etype   Marek Vasut
  • [PATCH 2/2] arm64: renesas: Switch R-Car V4H to renesas_rcar4_sa0 binman etype   Marek Vasut
• [PATCH 1/2] arm64: renesas: Convert SCIF SREC from u-boot-spl.bin   Marek Vasut
  • [PATCH 2/2] arm64: renesas: Add Renesas R-Car Gen4 SCIF/HSCIF loader SREC generation   Marek Vasut
• [PATCH 0/2] Add rpi5 specific defconfig   Peter Robinson
  • [PATCH 0/2] Add rpi5 specific defconfig   Peter Robinson

Last message date: Sun Jun 15 13:05:54 CEST 2025
Archived on: Sun Jun 15 13:06:09 CEST 2025

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...