August 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Aug 1 08:28:51 CEST 2025
Ending: Tue Aug 19 11:36:37 CEST 2025
Messages: 1296

• [PATCH 4/4] rockchip: rock5b-rk3588: Add support for ROCK 5B+   FUKAUMI Naoki
  • [PATCH 4/4] rockchip: rock5b-rk3588: Add support for ROCK 5B+   Jonas Karlman
• [PATCH v3 08/12] riscv: p8700: Add software emulation for AMO* instructions   Yao Zi
  • [PATCH v3 08/12] riscv: p8700: Add software emulation for AMO* instructions   Uros Stajic
• [PATCH 1/2] rockchip: Add initial RK3582 support   FUKAUMI Naoki
  • [PATCH 1/2] rockchip: Add initial RK3582 support   Jonas Karlman
• [PATCH] lwip: sntp: remove redundant sys_check_timeouts()   Jerome Forissier
• [PATCH v3 09/12] riscv: p8700: Add Coherence Manager (CM) and IOCU support   Yao Zi
  • [PATCH v3 09/12] riscv: p8700: Add Coherence Manager (CM) and IOCU support   Uros Stajic
• [PATCH v3 03/12] gpio: Add GPIO driver for Intel EG20T   Yao Zi
• [PATCH 0/3] mtd: rawnand: Fix some Smatch reported issues   Andrew Goodbody
  • [PATCH 1/3] mtd: rawnand: cortina_nand: Fix -ENOMEM detection   Andrew Goodbody
    • [PATCH 1/3] mtd: rawnand: cortina_nand: Fix -ENOMEM detection   Michael Nazzareno Trimarchi
  • [PATCH 2/3] mtd: rawnand: denali: Remove always true test   Andrew Goodbody
    • [PATCH 2/3] mtd: rawnand: denali: Remove always true test   Michael Nazzareno Trimarchi
  • [PATCH 3/3] mtd: rawnand: mxs_nand: Ensure err is set for error path   Andrew Goodbody
    • [PATCH 3/3] mtd: rawnand: mxs_nand: Ensure err is set for error path   Michael Nazzareno Trimarchi
• Please pull net-20250801   Jerome Forissier
  • Please pull net-20250801   Tom Rini
• [PATCH 0/3] mtd: rawnand: Fix some Smatch reports   Andrew Goodbody
• [PATCH 1/3] mtd: nand: pxa3xx: Free memory on error   Andrew Goodbody
  • [PATCH 1/3] mtd: nand: pxa3xx: Free memory on error   Michael Nazzareno Trimarchi
• [PATCH 2/3] mtd: rawnand: stm32_fmc2: Ensure to return error code   Andrew Goodbody
  • [PATCH 2/3] mtd: rawnand: stm32_fmc2: Ensure to return error code   Patrice CHOTARD
• [PATCH 3/3] mtd: nand: sunxi: Free allocated memory on errors   Andrew Goodbody
  • [PATCH 3/3] mtd: nand: sunxi: Free allocated memory on errors   Michael Nazzareno Trimarchi
• [PATCH] xilinx: Make XILINX_OF_BOARD_DTB_ADDR depending on OF_BOARD only   Michal Simek
• [PATCH 0/4] xilinx: mbv: Prepare MBV for CI   Michal Simek
• [PATCH 1/2] serial: uartlite: Use private data instead of platform   Michal Simek
• [PATCH] mailbox: zynqmp: Fix off by 1 errors   Michal Simek
• Smatch report for ubispl   Andrew Goodbody
  • Smatch report for ubispl   Benedikt Spranger
    • Smatch report for ubispl   Greg Malysa
  • [PATCH] drivers/mtd/ubispl/ubispl.c: limit copy size   Benedikt Spranger
    • [PATCH] drivers/mtd/ubispl/ubispl.c: limit copy size   Andrew Goodbody
• [PATCH] mtd: ubi: Remove test that always fails   Andrew Goodbody
• [PATCH] net: cortina_ni: Fix typo accessing wrong phy   Andrew Goodbody
• [PATCH 0/6] MPFS Icicle Kit Cleanup   Jamie Gibbons
  • [PATCH 3/6] mailbox: add PolarFire SoC mailbox driver   Jamie Gibbons
    • [PATCH 3/6] mailbox: add PolarFire SoC mailbox driver   Leo Liang
  • [PATCH 4/6] misc: add PolarFire SoC system controller   Jamie Gibbons
    • [PATCH 4/6] misc: add PolarFire SoC system controller   Leo Liang
  • [PATCH 5/6] board: microchip: mpfs_icicle: enable new driver configs   Jamie Gibbons
    • [PATCH 5/6] board: microchip: mpfs_icicle: enable new driver configs   Leo Liang
  • [PATCH 6/6] board: microchip: mpfs_icicle: update to use system controller   Jamie Gibbons
    • [PATCH 6/6] board: microchip: mpfs_icicle: update to use system controller   Leo Liang
• [PATCH 1/6] configs: microchip_mpfs_icicle: enable CONFIG_OF_BOARD_SETUP   Jamie Gibbons
  • [PATCH 1/6] configs: microchip_mpfs_icicle: enable CONFIG_OF_BOARD_SETUP   Leo Liang
• [PATCH 2/6] board: microchip: mpfs_icicle: make use of ft_board_setup()   Jamie Gibbons
  • [PATCH 2/6] board: microchip: mpfs_icicle: make use of ft_board_setup()   Leo Liang
• [PATCH] Timers: prevent conflict between ARM Generic Timer and Timer drivers   Marius Dinu
• [PATCH 0/2] sunxi: a523: enable Ethernet   Yixun Lan
• [PATCH v2 0/2] rockchip: Add support for ROCK 5B+   Jonas Karlman
  • [PATCH v2 1/2] rockchip: sdram: Add rockchip_sdram_type() helper   Jonas Karlman
    • [PATCH v2 1/2] rockchip: sdram: Add rockchip_sdram_type() helper   Quentin Schulz
  • [PATCH v2 2/2] rockchip: rock5b-rk3588: Add support for ROCK 5B+   Jonas Karlman
    • [PATCH v2 2/2] rockchip: rock5b-rk3588: Add support for ROCK 5B+   Quentin Schulz
      • [PATCH v2 2/2] rockchip: rock5b-rk3588: Add support for ROCK 5B+   Jonas Karlman
      • [PATCH v2 2/2] rockchip: rock5b-rk3588: Add support for ROCK 5B+   Quentin Schulz
• [PATCH] imx95_evk: Restore support for i.MX95 A0 silicon   Fabio Estevam
  • [PATCH] imx95_evk: Restore support for i.MX95 A0 silicon   Marek Vasut
• [PATCH v3 0/8] rockchip: rk3576: Add rng, checkboard() and generic board   Jonas Karlman
  • [PATCH v3 1/8] rng: rockchip_rng: Add compatible for RK3576   Jonas Karlman
  • [PATCH v3 2/8] rockchip: Add default USB_GADGET_PRODUCT_NUM for RK3576   Jonas Karlman
  • [PATCH v3 3/8] board: rockchip: Add minimal generic RK3576 board   Jonas Karlman
  • [PATCH v3 4/8] rockchip: rk3576: Implement checkboard() to print SoC variant   Jonas Karlman
  • [PATCH v3 5/8] arm: dts: rockchip: Include OTP in U-Boot pre-reloc phase for RK3576   Jonas Karlman
  • [PATCH v3 6/8] usb: dwc3-generic: Use combined glue and ctrl node for RK3576   Jonas Karlman
  • [PATCH v3 7/8] phy: rockchip-inno-usb2: Add support for RK3576   Jonas Karlman
  • [PATCH v3 8/8] phy: rockchip: usbdp: Add support for RK3576   Jonas Karlman
• [PATCH v3 0/3] board: rockchip: Add ArmSoM Sige5   Jonas Karlman
  • [PATCH v3 1/3] rockchip: clk: clk_rk3576: Add dummy CLK_REF_PCIEx_PHY support   Jonas Karlman
  • [PATCH v3 2/3] phy: rockchip: naneng-combphy: Add support for RK3576   Jonas Karlman
  • [PATCH v3 3/3] board: rockchip: Add ArmSoM Sige5   Jonas Karlman
• [PATCH v2 0/4] board: rockchip: Add Radxa ROCK 4D   Jonas Karlman
  • [PATCH v2 2/4] rockchip: spl: Add a read_brom_bootsource_id() helper   Jonas Karlman
  • [PATCH v2 3/4] rockchip: rk3576: Add SPI Flash boot support   Jonas Karlman
    • [PATCH v2 3/4] rockchip: rk3576: Add SPI Flash boot support   Quentin Schulz
      • [PATCH v2 3/4] rockchip: rk3576: Add SPI Flash boot support   Jonas Karlman
    • [PATCH v2 3/4] rockchip: rk3576: Add SPI Flash boot support   Quentin Schulz
      • [PATCH v2 3/4] rockchip: rk3576: Add SPI Flash boot support   Jonas Karlman
      • [PATCH v2 3/4] rockchip: rk3576: Add SPI Flash boot support   Quentin Schulz
  • [PATCH v2 4/4] board: rockchip: Add Radxa ROCK 4D   Jonas Karlman
    • [PATCH v2 4/4] board: rockchip: Add Radxa ROCK 4D   Quentin Schulz
      • [PATCH v2 4/4] board: rockchip: Add Radxa ROCK 4D   Jonas Karlman
• [PATCH v2 1/4] spi: rockchip_sfc: Support sclk_x2 version   Jonas Karlman
• [PATCH v4] Makefile: add dependency from lib to arch/$(ARCH)/lib   Tom Rini
• U-Boot support for wolfTPM and firmware update for SLB9672/SLB9673   Aidan Garske
  • U-Boot support for wolfTPM and firmware update for SLB9672/SLB9673   Ilias Apalodimas
    • U-Boot support for wolfTPM and firmware update for SLB9672/SLB9673   Aidan Garske
• [RFC PATCH 1/2] doc: board: qualcomm: document Pixel 3 / 3 XL support   David Heidelberg
  • [RFC PATCH 2/2] configs: Add google-pixel3 fragment config for Pixel 3 / 3 XL   David Heidelberg
• [RFC PATCH v2 1/2] doc: board: qualcomm: document Pixel 3 / 3 XL support   David Heidelberg
  • [RFC PATCH v2 2/2] configs: Add google-pixel3 fragment config for Pixel 3 / 3 XL   David Heidelberg
    • [RFC PATCH v2 2/2] configs: Add google-pixel3 fragment config for Pixel 3 / 3 XL   Casey Connolly
  • [RFC PATCH v2 1/2] doc: board: qualcomm: document Pixel 3 / 3 XL support   Casey Connolly
• [PATCH v1 1/1] board: samsung: add Samsung Galaxy R (GT-I9103) and Captivate Glide (SGH-i927) support   Svyatoslav Ryhel
• [PATCH v1 2/5] video: panel: add Sony L4F00430T01 panel driver   Svyatoslav Ryhel
• [PATCH v1 3/5] video: panel: add Samsung S6E63M0 panel driver   Svyatoslav Ryhel
• [PATCH v1 4/5] video: bridge: add Samsung CMC623 image converter driver   Svyatoslav Ryhel
• [PATCH v1 5/5] video: backlight: add Samsung CMC623 backlight PWM driver   Svyatoslav Ryhel
• [PATCH v1 0/5] video: Add drivers for Samsung's Tegra phones   Svyatoslav Ryhel
• [U-Boot, v3, 1/1] misc: fs_loader: Add request_firmware_into_buf_via_script() for flexible firmware loading via U-Boot script   Lucien.Jheng
• [PATCH 0/2] Support SMP on RISC-V cores with Zalrsc only   Yao Zi
  • [PATCH 1/2] riscv: Add Kconfig options to distinguish Zaamo and Zalrsc   Yao Zi
    • [PATCH 1/2] riscv: Add Kconfig options to distinguish Zaamo and Zalrsc   Yixun Lan
      • [PATCH 1/2] riscv: Add Kconfig options to distinguish Zaamo and Zalrsc   Yao Zi
    • [PATCH 1/2] riscv: Add Kconfig options to distinguish Zaamo and Zalrsc   Yixun Lan
      • [PATCH 1/2] riscv: Add Kconfig options to distinguish Zaamo and Zalrsc   Yao Zi
  • [PATCH 2/2] riscv: Add a Zalrsc-only alternative for synchronization in start.S   Yao Zi
    • [PATCH 2/2] riscv: Add a Zalrsc-only alternative for synchronization in start.S   Yixun Lan
      • [PATCH 2/2] riscv: Add a Zalrsc-only alternative for synchronization in start.S   Yao Zi
• [PATCH 1/2] env: mtd: add the missing put_mtd_device()   Tom Rini
• No console output on Raspberry Pi Compute Module 5   Jonas Kvinge
• [PATCH v3 0/4] rockchip: Add support for RAM boot from maskrom mode   Jonas Karlman
  • [PATCH v3 1/4] rockchip: Move TEXT_BASE to 8 MiB offset from start of DRAM   Jonas Karlman
  • [PATCH v3 2/4] rockchip: Add support for RAM boot from maskrom mode   Jonas Karlman
  • [PATCH v3 3/4] rockchip: sdram: Add fallback that fixup DRAM gaps on RK3588   Jonas Karlman
  • [PATCH v3 4/4] HACK: rockchip: Add miniall.ini files to simplify test of RAM boot   Jonas Karlman
• [PATCH v7 05/12] drivers: i3c: Enabled Kconfig and Makefile for DWI3C   Askar Safin
  • [PATCH v7 05/12] drivers: i3c: Enabled Kconfig and Makefile for DWI3C   Heiko Schocher
• [PATCH] mtd: nand: raw: Remove unused lpc32xx_nand_slc driver   Michael Nazzareno Trimarchi
• [PATCH v2] mtd: nand: raw: Remove unused octeontx_nand driver   Michael Nazzareno Trimarchi
• [PATCH v1] mmc: socfpga_dw_mmc: Retrieve clock manager address via clocks phandle   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1] mmc: socfpga_dw_mmc: Retrieve clock manager address via clocks phandle   Peng Fan
    • [PATCH v1] mmc: socfpga_dw_mmc: Retrieve clock manager address via clocks phandle   Yuslaimi, Alif Zakuan
      • [PATCH v1] mmc: socfpga_dw_mmc: Retrieve clock manager address via clocks phandle   Chee, Tien Fong
      • [PATCH v1] mmc: socfpga_dw_mmc: Retrieve clock manager address via clocks phandle   Yuslaimi, Alif Zakuan
• [PATCH v1 00/34] SoCFPGA: Update Boot Support for Agilex7/7M in U-Boot   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 01/34] drivers: clk: agilex: Use real clock source frequency   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 02/34] configs: agilex: Combine defconfig for all boot flashes   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 03/34] arch: arm: dts: agilex: Update Agilex device tree   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 04/34] arm: socfpga: agilex: Probe DT for firewall setup   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 05/34] arm: socfpga: Update Agilex SPL data save and restore implementation   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 06/34] arm: socfpga: Enable ASYNC interrupts in Agilex SPL   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 07/34] drivers: watchdog: Enable watchdog support in SPL for Agilex   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 08/34] drivers: clk: agilex: Replace status polling with wait_for_bit_le32()   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 09/34] arm: socfpga: agilex5: Refactor system manager driver initialization   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 10/34] arm: socfpga: agilex: Enable system manager driver for Agilex   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 11/34] ddr: altera: soc64: Add secure region support for ATF flow   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 12/34] ddr: altera: agilex: Remove code redundancy   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 13/34] arm: socfpga: Define the usage of boot scratch cold reg 8   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 14/34] ddr: altera: agilex: Get ACF from boot scratch register   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 15/34] include: configs: socfpga: Add environment variables for distro boot   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 16/34] arm: socfpga: misc: Exclude Agilex from clock manager base address retrieval   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 17/34] sysreset: socfpga: soc64: Enable L2 reset   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 18/34] arm: socfpga: soc64: Perform warm reset after L2 reset in SPL   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 19/34] arch: arm: agilex: Clean up DT settings in U-Boot dtsi files   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 20/34] arch: arm: dts: agilex: Switch to using upstream Linux DT config   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 21/34] arch: arm: dts: Basic device tree support added for Agilex7 M-series   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 22/34] arch: arm: mach-socfpga: Add Agilex7 M-series mach-socfgpa enablement   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 23/34] arch: arm: mach-socfpga: Improve help info.   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 24/34] arch: arm: mach-socfpga: Update handoff settings for Agilex7 M-series   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 25/34] include: configs: Add config header file for Agilex7 M-series   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 26/34] include: configs: soc64: Use CONFIG_SPL_ATF to differentiate bootfile   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 27/34] clk: altera: Add clock support for Agilex7 M-series   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 28/34] ddr: altera: Add uibssm mailbox support for Agilex7 M-series with HBM   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 29/34] ddr: altera: Add DDR driver for Agilex7 M-series   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 30/34] ddr: altera: soc64: Clean up bit-shift by zero bit   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 31/34] ddr: altera: soc64: Fix dram size calculation in clamshell mode   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 32/34] arch: arm: mach-socfpga: Update kconfig for new platform Agilex7 M-series   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 33/34] arch: arm: dts: Update Makefile for new platform Agilex7 M-series   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 34/34] configs: Add defconfig for Agilex7 M-series   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 00/34] SoCFPGA: Update Boot Support for Agilex7/7M in U-Boot   Chee, Tien Fong
• [PATCH v7 00/12] Add Synopsys MIPI I3C Driver support   Maniyam, Dinesh
  • [PATCH v7 00/12] Add Synopsys MIPI I3C Driver support   Heiko Schocher
  • [PATCH v7 00/12] Add Synopsys MIPI I3C Driver support   dinesh.maniyam at altera.com
    • [PATCH v8 00/12] Add Synopsys MIPI I3C Driver support   dinesh.maniyam at altera.com
      • [PATCH v8 00/12] Add Synopsys MIPI I3C Driver support   Maniyam, Dinesh
    • [PATCH v8 01/12] drivers: i3c: Add new i3c uclass id   dinesh.maniyam at altera.com
    • [PATCH v8 02/12] drivers: i3c: Add driver for MIPI DWI3C   dinesh.maniyam at altera.com
    • [PATCH v8 03/12] drivers: i3c: Add i3c uclass driver.   dinesh.maniyam at altera.com
    • [PATCH v8 04/12] drivers: Enabled Kconfig and Makefile for i3c support   dinesh.maniyam at altera.com
    • [PATCH v8 05/12] drivers: i3c: Enabled Kconfig and Makefile for DWI3C   dinesh.maniyam at altera.com
    • [PATCH v8 06/12] drivers: i3c: Add i3c sandbox simple test.   dinesh.maniyam at altera.com
    • [PATCH v8 07/12] drivers: i3c: master: Enable probe i3c without slave device   dinesh.maniyam at altera.com
    • [PATCH v8 08/12] i3c: master: dw-i3c-master: Fix OD_TIMING for spike filter   dinesh.maniyam at altera.com
    • [PATCH v8 09/12] cmd: Add i3c command support.   dinesh.maniyam at altera.com
    • [PATCH v8 10/12] test: cmd: Add simple test for i3c   dinesh.maniyam at altera.com
    • [PATCH v8 11/12] configs: sandbox_defconfig: Enable configs for sandbox i3c   dinesh.maniyam at altera.com
    • [PATCH v8 12/12] configs: agilex5_defconfig: Enable i3c configs for agilex5   dinesh.maniyam at altera.com
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
  • Please pull u-boot-tegra staging   Tom Rini
• 回复: [RESEND PATCH] phy: phy-imx8mq-usb: Add support for i.MX95 USB3 PHY   Alice Guo (OSS)
• [BUG] test_efi_capsule/conftest.py fails   Ilias Apalodimas
• [PATCH] fpga: cyclon2: Remove message never printed   Alexander Dahl
  • [PATCH] fpga: cyclon2: Remove message never printed   Michal Simek
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Alexander Dahl
  • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
    • New Defects reported by Coverity Scan for Das U-Boot   Maniyam, Dinesh
    • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heiko Schocher
      • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Maniyam, Dinesh
      • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heiko Schocher
• [PATCH] cmd: mtd: Enable speed benchmarking   Miquel Raynal
• [PATCH v2] cmd: mtd: Enable speed benchmarking   Michael Nazzareno Trimarchi
  • [PATCH v2] cmd: mtd: Enable speed benchmarking   Miquel Raynal
• Pull request for u-boot-nand-03082025   Michael Nazzareno Trimarchi
  • Pull request for u-boot-nand-03082025   Tom Rini
• [PATCH] cmd: i2c: fix coverity issue   Heiko Schocher
• [PATCH] USB OTG: make dwc2 otg driver dependent on Exynos platform   Marius Dinu
  • [PATCH] USB OTG: make dwc2 otg driver dependent on Exynos platform   Marius Dinu
  • [PATCH] USB OTG: make dwc2 otg driver dependent on Exynos platform   Jonas Karlman
    • [PATCH] USB OTG: make dwc2 otg driver dependent on Exynos platform   Marius Dinu
    • [PATCH] USB OTG: make dwc2 otg driver dependent on Exynos platform   Marius Dinu
      • [PATCH] USB OTG: make dwc2 otg driver dependent on Exynos platform   Quentin Schulz
• [PATCH v5 0/4] Add Onion Omega2/2+ board support   Philip Oberfichtner
• [PATCH] net: lwip: ping: set net_try_count to 1   Jerome Forissier
• [PATCH v5 4/4] mips: mt7628: Add Onion Omega2/2+ board support   Daniel Schwierzeck
  • [PATCH v5 4/4] mips: mt7628: Add Onion Omega2/2+ board support   Philip Oberfichtner
• [U-Boot, v4, 1/1] misc: fs_loader: Add request_firmware_into_buf_via_script() for flexible firmware loading via U-Boot script   Lucien.Jheng
  • [U-Boot, v4, 1/1] misc: fs_loader: Add request_firmware_into_buf_via_script() for flexible firmware loading via U-Boot script   Marek Vasut
• [PATCH 0/2] net: dwc_eth_xgmac: Fix two Smatch reports   Andrew Goodbody
  • [PATCH 1/2] net: dwc_eth_xgmac: Use unwind goto on error   Andrew Goodbody
  • [PATCH 2/2] net: dwc_eth_xgmac_socfpga: Remove always true test   Andrew Goodbody
• [PATCH] net: e1000: Free temporary buffer on exit   Andrew Goodbody
  • [PATCH] net: e1000: Free temporary buffer on exit   Tom Rini
• [PATCH] net: fec_mxc: Set error code on error exit   Andrew Goodbody
  • [PATCH] net: fec_mxc: Set error code on error exit   Fabio Estevam
    • [PATCH] net: fec_mxc: Set error code on error exit   Andrew Goodbody
• [PATCH 0/3] net: fm: Fix some Smatch reports   Andrew Goodbody
  • [PATCH 1/3] net: fm: Correct test for timeout   Andrew Goodbody
  • [PATCH 2/3] net: fm: NULL check dev before dereference   Andrew Goodbody
  • [PATCH 3/3] net: fm: Correct test for timeout   Andrew Goodbody
• [PATCH 0/5] net: fsl: Fix some Smatch reports   Andrew Goodbody
  • [PATCH 1/5] net: fsl_enetc: Fix copy/paste error   Andrew Goodbody
  • [PATCH 2/5] net: fsl-mc: NULL check dflt_dpio before dereference   Andrew Goodbody
  • [PATCH 3/5] net: fsl-mc: NULL check dflt_dpbp before dereference   Andrew Goodbody
  • [PATCH 4/5] net: fsl-mc: NULL check dflt_dpni before dereference   Andrew Goodbody
  • [PATCH 5/5] net: fsl-mc: Incorrect variable used in error path   Andrew Goodbody
• [PATCH] power: pmic: pca9450: Add support for system reset   Paul Geurts
  • [PATCH] power: pmic: pca9450: Add support for system reset   Primoz Fiser
    • [PATCH] power: pmic: pca9450: Add support for system reset   Paul Geurts
• [PATCH v2 0/3] rockchip: Add initial RK3582 support   Jonas Karlman
  • [PATCH v2 1/3] rockchip: Add initial RK3582 support   Jonas Karlman
    • [PATCH v2 1/3] rockchip: Add initial RK3582 support   Quentin Schulz
      • [PATCH v2 1/3] rockchip: Add initial RK3582 support   Jonas Karlman
      • [PATCH v2 1/3] rockchip: Add initial RK3582 support   Quentin Schulz
      • [PATCH v2 1/3] rockchip: Add initial RK3582 support   Jonas Karlman
  • [PATCH v2 2/3] rockchip: rk3588-generic: Enable support for RK3582   Jonas Karlman
  • [PATCH v2 3/3] rockchip: rk3588s-rock-5c: Add support for ROCK 5C Lite variant   Jonas Karlman
• [PATCH v2] rockchip: spl-boot-order: Defer probe of boot device   Jonas Karlman
• [PATCH] sandbox: Add an additional dummy sync macro   Tom Rini
  • [PATCH] sandbox: Add an additional dummy sync macro   Tom Rini
• [PATCH] sm: Rework the Kconfig logic here   Tom Rini
  • [PATCH] sm: Rework the Kconfig logic here   Peter Robinson
  • [PATCH] sm: Rework the Kconfig logic here   Tom Rini
• [PATCH] power: Tighten some power driver dependencies   Tom Rini
• [PATCH] pinctrl: Tighten some pinctrl driver dependencies   Tom Rini
  • [PATCH] pinctrl: Tighten some pinctrl driver dependencies   Tom Rini
• [PATCH 1/2] pwm: Tighten some pwm driver dependencies   Tom Rini
  • [PATCH 2/2] pwm: pwm-aspeed: Add missing <linux/log2.h> to pwm-aspeed.c   Tom Rini
  • [PATCH 1/2] pwm: Tighten some pwm driver dependencies   Tom Rini
• [PATCH] ram: Tighten some ram driver dependencies   Tom Rini
  • [PATCH] remoteproc: Tighten some remoteproc driver dependencies   Tom Rini
    • [PATCH] remoteproc: Tighten some remoteproc driver dependencies   Tom Rini
  • [PATCH] reset: Tighten some reset driver dependencies   Tom Rini
    • [PATCH] reset: Tighten some reset driver dependencies   Tom Rini
• [PATCH 1/3] rtc: Tighten some rtc driver dependencies   Tom Rini
  • [PATCH 2/3] rtc: mc146818: Fix building on more architectures   Tom Rini
  • [PATCH 2/2] serial: linflexuart: Remove unused driver   Tom Rini
  • [PATCH] sound: Tighten some sound driver dependencies   Tom Rini
    • [PATCH] sound: Tighten some sound driver dependencies   Peter Robinson
    • [PATCH] sound: Tighten some sound driver dependencies   Tom Rini
  • [PATCH 1/2] spi: Tighten some spi driver dependencies   Tom Rini
  • [PATCH 2/2] spi: altera_spi: Add missing <time.h> to altera_spi.c   Tom Rini
  • [PATCH] sysreset: Tighten some sysreset driver dependencies   Tom Rini
    • [PATCH] sysreset: Tighten some sysreset driver dependencies   Peter Robinson
    • [PATCH] sysreset: Tighten some sysreset driver dependencies   Tom Rini
• [PATCH 3/3] rtc: pl031: Correct function type of pl031_write_reg   Tom Rini
• [PATCH 1/2] serial: Tighten some serial driver dependencies   Tom Rini
• [PATCH] soc: Tighten some soc driver dependencies   Tom Rini
  • [PATCH] soc: Tighten some soc driver dependencies   Casey Connolly
  • [PATCH] soc: Tighten some soc driver dependencies   Tom Rini
• [PATCH v2 00/22] drivers: mtd: spi-nand: driver improvements   Mikhail Kshevetskiy
• [PATCH v2 01/22] drivers: spi-mem: sync a bit with linux-6.16-rc6   Mikhail Kshevetskiy
• [PATCH v2 02/22] drivers: mtd: spi-nand: Use the spi-mem dirmap API   Mikhail Kshevetskiy
• [PATCH v2 03/22] drivers: mtd: spi-nand: Add a NAND page I/O request type   Mikhail Kshevetskiy
• [PATCH v2 04/22] drivers: mtd: spi-nand: add missed add missed MODULE_DEVICE_TABLE()   Mikhail Kshevetskiy
  • [PATCH v2 04/22] drivers: mtd: spi-nand: add missed add missed MODULE_DEVICE_TABLE()   Frieder Schrempf
    • [PATCH v3 00/22] mtd: spi-nand: driver improvements   Mikhail Kshevetskiy
      • [PATCH v3 01/22] spi-mem: sync a bit with linux-6.16-rc6   Mikhail Kshevetskiy
      • [PATCH v3 02/22] mtd: spinand: Use the spi-mem dirmap API   Mikhail Kshevetskiy
      • [PATCH v3 03/22] mtd: spinand: Add a NAND page I/O request type   Mikhail Kshevetskiy
      • [PATCH v3 04/22] mtd: spinand: add missing MODULE_DEVICE_TABLE()   Mikhail Kshevetskiy
      • [PATCH v3 05/22] mtd: spinand: simulate behavior of linux's function spinand_wait()   Mikhail Kshevetskiy
      • [PATCH v3 06/22] mtd: spinand: more use of spinand_to_{something} helpers   Mikhail Kshevetskiy
      • [PATCH v3 07/22] mtd: spinand: replace enable_ecc variable with disable_ecc and update corresponding logic   Mikhail Kshevetskiy
      • [PATCH v3 08/22] mtd: spinand: minor refactoring   Mikhail Kshevetskiy
      • [PATCH v3 09/22] mtd: spinand: more refactoring   Mikhail Kshevetskiy
      • [PATCH v3 10/22] mtd: spinand: sync code with linux-6.10   Mikhail Kshevetskiy
      • [PATCH v3 11/22] mtd: spinand: set bitflip_threshold to 75% of ECC strength   Mikhail Kshevetskiy
      • [PATCH v3 12/22] mtd: spinand: Add support for setting plane select bits   Mikhail Kshevetskiy
      • [PATCH v3 13/22] mtd: spinand: Remove write_enable_op() in markbad()   Mikhail Kshevetskiy
      • [PATCH v3 14/22] mtd: spinand: Introduce a way to avoid raw access   Mikhail Kshevetskiy
      • [PATCH v3 15/22] mtd: spinand: add support of continuous reading mode   Mikhail Kshevetskiy
      • [PATCH v3 16/22] mtd: spinand: Add read retry support   Mikhail Kshevetskiy
      • [PATCH v3 17/22] mtd: spinand: add OTP support   Mikhail Kshevetskiy
      • [PATCH v3 18/22] mtd: spinand: Enhance the logic when picking a variant   Mikhail Kshevetskiy
      • [PATCH v3 19/22] mtd: spinand: sync with linux-6.16-rc6   Mikhail Kshevetskiy
      • [PATCH v3 20/22] mtd: spinand: fix direct mapping creation sizes.   Mikhail Kshevetskiy
      • [PATCH v3 21/22] mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails   Mikhail Kshevetskiy
      • [PATCH v3 22/22] mtd: spinand: repeat reading in regular mode if continuous reading fails   Mikhail Kshevetskiy
      • [PATCH v3 00/22] mtd: spi-nand: driver improvements   Peter Robinson
    • [PATCH v4 00/24] mtd: spinand: driver improvements   Mikhail Kshevetskiy
      • [PATCH v4 01/24] spi-mem: sync a bit with linux-6.16   Mikhail Kshevetskiy
      • [PATCH v4 01/24] spi-mem: sync a bit with linux-6.16   Frieder Schrempf
      • [PATCH v4 02/24] mtd: spinand: Use the spi-mem dirmap API   Mikhail Kshevetskiy
      • [PATCH v4 02/24] mtd: spinand: Use the spi-mem dirmap API   Frieder Schrempf
      • [PATCH v4 03/24] mtd: nand: Add a NAND page I/O request type   Mikhail Kshevetskiy
      • [PATCH v4 03/24] mtd: nand: Add a NAND page I/O request type   Frieder Schrempf
      • [PATCH v4 04/24] mtd: spinand: core: add missing MODULE_DEVICE_TABLE()   Mikhail Kshevetskiy
      • [PATCH v4 05/24] mtd: spinand: simulate behavior of linux's function spinand_wait()   Mikhail Kshevetskiy
      • [PATCH v4 05/24] mtd: spinand: simulate behavior of linux's function spinand_wait()   Frieder Schrempf
      • [PATCH v4 06/24] mtd: spinand: more use of spinand_to_{something} helpers   Mikhail Kshevetskiy
      • [PATCH v4 06/24] mtd: spinand: more use of spinand_to_{something} helpers   Frieder Schrempf
      • [PATCH v4 07/24] mtd: spinand: replace enable_ecc variable with disable_ecc and update corresponding logic   Mikhail Kshevetskiy
      • [PATCH v4 07/24] mtd: spinand: replace enable_ecc variable with disable_ecc and update corresponding logic   Frieder Schrempf
      • [PATCH v4 08/24] mtd: spinand: minor refactoring   Mikhail Kshevetskiy
      • [PATCH v4 08/24] mtd: spinand: minor refactoring   Frieder Schrempf
      • [PATCH v4 09/24] mtd: spinand: more refactoring   Mikhail Kshevetskiy
      • [PATCH v4 09/24] mtd: spinand: more refactoring   Frieder Schrempf
      • [PATCH v4 10/24] mtd: spinand: sync code with linux-6.10   Mikhail Kshevetskiy
      • [PATCH v4 10/24] mtd: spinand: sync code with linux-6.10   Frieder Schrempf
      • [PATCH v4 11/24] mtd: spinand: set bitflip_threshold to 75% of ECC strength   Mikhail Kshevetskiy
      • [PATCH v4 12/24] mtd: spinand: Add support for setting plane select bits   Mikhail Kshevetskiy
      • [PATCH v4 13/24] mtd: spinand: Remove write_enable_op() in markbad()   Mikhail Kshevetskiy
      • [PATCH v4 14/24] mtd: spinand: Introduce a way to avoid raw access   Mikhail Kshevetskiy
      • [PATCH v4 15/24] mtd: spinand: add support of continuous reading mode   Mikhail Kshevetskiy
      • [PATCH v4 16/24] mtd: spinand: Add read retry support   Mikhail Kshevetskiy
      • [PATCH v4 17/24] mtd: spinand: add OTP support   Mikhail Kshevetskiy
      • [PATCH v4 18/24] mtd: spinand: Enhance the logic when picking a variant   Mikhail Kshevetskiy
      • [PATCH v4 19/24] mtd: spinand: propagate spinand_wait() errors from spinand_write_page()   Mikhail Kshevetskiy
      • [PATCH v4 19/24] mtd: spinand: propagate spinand_wait() errors from spinand_write_page()   Frieder Schrempf
      • [PATCH v4 20/24] mtd: spinand: Add a ->configure_chip() hook   Mikhail Kshevetskiy
      • [PATCH v4 20/24] mtd: spinand: Add a ->configure_chip() hook   Frieder Schrempf
      • [PATCH v4 21/24] mtd: spinand: sync with linux-6.17-rc1   Mikhail Kshevetskiy
      • [PATCH v4 21/24] mtd: spinand: sync with linux-6.17-rc1   Frieder Schrempf
      • [PATCH v4 22/24] mtd: spinand: fix direct mapping creation sizes.   Mikhail Kshevetskiy
      • [PATCH v4 23/24] mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails   Mikhail Kshevetskiy
      • [PATCH v4 24/24] mtd: spinand: repeat reading in regular mode if continuous reading fails   Mikhail Kshevetskiy
      • [PATCH v4 00/24] mtd: spinand: driver improvements   Frieder Schrempf
      • [PATCH v5 00/21] mtd: spinand: driver improvements   Mikhail Kshevetskiy
      • [PATCH v5 01/21] spi: spi-mem: Extend SPI MEM ops to match Linux 6.16   Mikhail Kshevetskiy
      • [PATCH v5 02/21] mtd: spinand: Use the spi-mem dirmap API   Mikhail Kshevetskiy
      • [PATCH v5 02/21] mtd: spinand: Use the spi-mem dirmap API   Frieder Schrempf
      • [PATCH v5 03/21] mtd: nand: Add a NAND page I/O request type   Mikhail Kshevetskiy
      • [PATCH v5 03/21] mtd: nand: Add a NAND page I/O request type   Frieder Schrempf
      • [PATCH v5 03/21] mtd: nand: Add a NAND page I/O request type   Mikhail Kshevetskiy
      • [PATCH v5 04/21] mtd: spinand: core: add missing MODULE_DEVICE_TABLE()   Mikhail Kshevetskiy
      • [PATCH v5 05/21] mtd: spinand: Extend spinand_wait() to match Linux kernel implementation   Mikhail Kshevetskiy
      • [PATCH v5 05/21] mtd: spinand: Extend spinand_wait() to match Linux kernel implementation   Frieder Schrempf
      • [PATCH v5 06/21] mtd: spinand: Make use of spinand_to_[mtd/nand]() helpers   Mikhail Kshevetskiy
      • [PATCH v5 07/21] mtd: spinand: Align logic for enabling ECC to match Linux kernel   Mikhail Kshevetskiy
      • [PATCH v5 08/21] mtd: spinand: Refactor spinand_init* functions   Mikhail Kshevetskiy
      • [PATCH v5 09/21] mtd: spinand: Refactor ECC/OOB functions   Mikhail Kshevetskiy
      • [PATCH v5 10/21] mtd: spinand: Sync core code and device support with Linux 6.10   Mikhail Kshevetskiy
      • [PATCH v5 10/21] mtd: spinand: Sync core code and device support with Linux 6.10   Frieder Schrempf
      • [PATCH v5 11/21] mtd: spinand: set bitflip_threshold to 75% of ECC strength   Mikhail Kshevetskiy
      • [PATCH v5 12/21] mtd: spinand: Add support for setting plane select bits   Mikhail Kshevetskiy
      • [PATCH v5 13/21] mtd: spinand: Remove write_enable_op() in markbad()   Mikhail Kshevetskiy
      • [PATCH v5 14/21] mtd: spinand: Introduce a way to avoid raw access   Mikhail Kshevetskiy
      • [PATCH v5 15/21] mtd: spinand: add support of continuous reading mode   Mikhail Kshevetskiy
      • [PATCH v5 16/21] mtd: spinand: Add read retry support   Mikhail Kshevetskiy
      • [PATCH v5 17/21] mtd: spinand: add OTP support   Mikhail Kshevetskiy
      • [PATCH v5 18/21] mtd: spinand: Enhance the logic when picking a variant   Mikhail Kshevetskiy
      • [PATCH v5 19/21] mtd: spinand: propagate spinand_wait() errors from spinand_write_page()   Mikhail Kshevetskiy
      • [PATCH v5 20/21] mtd: spinand: Add a ->configure_chip() hook   Mikhail Kshevetskiy
      • [PATCH v5 21/21] mtd: spinand: Sync core code and device support with Linux 6.17-rc1   Mikhail Kshevetskiy
      • [PATCH v5 21/21] mtd: spinand: Sync core code and device support with Linux 6.17-rc1   Frieder Schrempf
      • [PATCH v6 00/21] mtd: spinand: driver improvements   Mikhail Kshevetskiy
      • [PATCH v6 01/21] spi: spi-mem: Extend SPI MEM ops to match Linux 6.16   Mikhail Kshevetskiy
      • [PATCH v6 02/21] mtd: spinand: Use the spi-mem dirmap API   Mikhail Kshevetskiy
      • [PATCH v6 03/21] mtd: nand: Add a NAND page I/O request type   Mikhail Kshevetskiy
      • [PATCH v6 03/21] mtd: nand: Add a NAND page I/O request type   Frieder Schrempf
      • [PATCH v6 04/21] mtd: spinand: core: add missing MODULE_DEVICE_TABLE()   Mikhail Kshevetskiy
      • [PATCH v6 04/21] mtd: spinand: core: add missing MODULE_DEVICE_TABLE()   Frieder Schrempf
      • [PATCH v6 05/21] mtd: spinand: Extend spinand_wait() to match Linux kernel implementation   Mikhail Kshevetskiy
      • [PATCH v6 06/21] mtd: spinand: Make use of spinand_to_[mtd/nand]() helpers   Mikhail Kshevetskiy
      • [PATCH v6 07/21] mtd: spinand: Align logic for enabling ECC to match Linux kernel   Mikhail Kshevetskiy
      • [PATCH v6 08/21] mtd: spinand: Refactor spinand_init* functions   Mikhail Kshevetskiy
      • [PATCH v6 09/21] mtd: spinand: Refactor ECC/OOB functions   Mikhail Kshevetskiy
      • [PATCH v6 10/21] mtd: spinand: Sync core code and device support with Linux 6.10   Mikhail Kshevetskiy
      • [PATCH v6 11/21] mtd: spinand: set bitflip_threshold to 75% of ECC strength   Mikhail Kshevetskiy
      • [PATCH v6 12/21] mtd: spinand: Add support for setting plane select bits   Mikhail Kshevetskiy
      • [PATCH v6 12/21] mtd: spinand: Add support for setting plane select bits   Frieder Schrempf
      • [PATCH v6 13/21] mtd: spinand: Remove write_enable_op() in markbad()   Mikhail Kshevetskiy
      • [PATCH v6 13/21] mtd: spinand: Remove write_enable_op() in markbad()   Frieder Schrempf
      • [PATCH v6 14/21] mtd: spinand: Introduce a way to avoid raw access   Mikhail Kshevetskiy
      • [PATCH v6 14/21] mtd: spinand: Introduce a way to avoid raw access   Frieder Schrempf
      • [PATCH v6 15/21] mtd: spinand: add support of continuous reading mode   Mikhail Kshevetskiy
      • [PATCH v6 15/21] mtd: spinand: add support of continuous reading mode   Frieder Schrempf
      • [PATCH v6 16/21] mtd: spinand: Add read retry support   Mikhail Kshevetskiy
      • [PATCH v6 16/21] mtd: spinand: Add read retry support   Frieder Schrempf
      • [PATCH v6 17/21] mtd: spinand: add OTP support   Mikhail Kshevetskiy
      • [PATCH v6 17/21] mtd: spinand: add OTP support   Frieder Schrempf
      • [PATCH v6 18/21] mtd: spinand: Enhance the logic when picking a variant   Mikhail Kshevetskiy
      • [PATCH v6 18/21] mtd: spinand: Enhance the logic when picking a variant   Frieder Schrempf
      • [PATCH v6 18/21] mtd: spinand: Enhance the logic when picking a variant   Mikhail Kshevetskiy
      • [PATCH v6 18/21] mtd: spinand: Enhance the logic when picking a variant   Frieder Schrempf
      • [PATCH v6 19/21] mtd: spinand: propagate spinand_wait() errors from spinand_write_page()   Mikhail Kshevetskiy
      • [PATCH v6 19/21] mtd: spinand: propagate spinand_wait() errors from spinand_write_page()   Frieder Schrempf
      • [PATCH v6 20/21] mtd: spinand: Add a ->configure_chip() hook   Mikhail Kshevetskiy
      • [PATCH v6 20/21] mtd: spinand: Add a ->configure_chip() hook   Frieder Schrempf
      • [PATCH v6 21/21] mtd: spinand: Sync core code and device support with Linux 6.17-rc1   Mikhail Kshevetskiy
• [PATCH v2 05/22] drivers: mtd: spi-nand: simulate behavior of linux's function spinand_wait()   Mikhail Kshevetskiy
• [PATCH v2 06/22] drivers: mtd: spi-nand: more use of spinand_to_{something} helpers   Mikhail Kshevetskiy
• [PATCH v2 07/22] drivers: mtd: spi-nand: replace enable_ecc variable with disable_ecc and update corresponding logic   Mikhail Kshevetskiy
• [PATCH v2 08/22] drivers: mtd: spi-nand: minor refactoring   Mikhail Kshevetskiy
• [PATCH v2 09/22] drivers: mtd: spi-nand: more refactoring   Mikhail Kshevetskiy
• [PATCH v2 10/22] drivers: mtd: spi-nand: sync code with linux-6.10   Mikhail Kshevetskiy
• [PATCH v2 11/22] drivers: mtd: spi-nand: set bitflip_threshold to 75% of ECC strength   Mikhail Kshevetskiy
• [PATCH v2 12/22] drivers: mtd: spi-nand: Add support for setting plane select bits   Mikhail Kshevetskiy
• [PATCH v2 13/22] drivers: mtd: spi-nand: Remove write_enable_op() in markbad()   Mikhail Kshevetskiy
• [PATCH v2 14/22] drivers: mtd: spi-nand: Introduce a way to avoid raw access   Mikhail Kshevetskiy
• [PATCH v2 15/22] drivers: mtd: spi-nand: add support of continuous reading mode   Mikhail Kshevetskiy
• [PATCH v2 16/22] drivers: mtd: spi-nand: Add read retry support   Mikhail Kshevetskiy
• [PATCH v2 17/22] drivers: mtd: spi-nand: add OTP support   Mikhail Kshevetskiy
• [PATCH v2 18/22] drivers: mtd: spi-nand: Enhance the logic when picking a variant   Mikhail Kshevetskiy
• [PATCH v2 19/22] drivers: mtd: spi-nand: sync with linux-6.16-rc6   Mikhail Kshevetskiy
• [PATCH v2 20/22] drivers: mtd: spi-nand: fix direct mapping creation sizes.   Mikhail Kshevetskiy
• [PATCH v2 21/22] drivers: mtd: spi-nand: try a regular dirmap if creating a dirmap for continuous reading fails   Mikhail Kshevetskiy
• [PATCH v2 22/22] drivers: mtd: spi-nand: repeat reading in regular mode if continuous reading fails   Mikhail Kshevetskiy
• [PATCH 0/2] Add support for AM62P SR1.2   Judith Mendez
  • [PATCH 2/2] mmc: am654_sdhci: Disable HS400 for AM62P SR1.0 and SR1.1   Judith Mendez
    • [PATCH 2/2] mmc: am654_sdhci: Disable HS400 for AM62P SR1.0 and SR1.1   Peng Fan
• [PATCH 1/2] soc: soc_ti_k3: Add support for AM62P variants   Judith Mendez
  • [PATCH 1/2] soc: soc_ti_k3: Add support for AM62P variants   Tom Rini
    • [PATCH 1/2] soc: soc_ti_k3: Add support for AM62P variants   Judith Mendez
• [PATCH] test: py: test_fit_mkimage_validate: Only run either test on sandbox   Tom Rini
• [PATCH 1/1] Kconfig: typo restict   Tom Rini
• [PATCH] cmd: bdinfo: Fix showing correct IP address based on current device   Tom Rini
• [PATCH 1/1] Makefile: Remove expansion of undefined variable   Tom Rini
• [PATCH v1] misc: fs_loader: Initialize actread variable   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1] misc: fs_loader: Initialize actread variable   Tom Rini
    • [PATCH v1] misc: fs_loader: Initialize actread variable   Marek Vasut
      • [PATCH v1] misc: fs_loader: Initialize actread variable   Tom Rini
      • [PATCH v1] misc: fs_loader: Initialize actread variable   Yuslaimi, Alif Zakuan
• Smatch error report in drivers/misc/imx_ele/fuse.c   Peng Fan
  • Smatch error report in drivers/misc/imx_ele/fuse.c   Andrew Goodbody
• [PATCH 0/2] mmc: gen_atmel_mci: Fix some Smatch issues   Peng Fan
  • [PATCH 0/2] mmc: gen_atmel_mci: Fix some Smatch issues   Eugen Hristev
• [PATCH 0/2] mmc: octeontx_hsmmc: Fix two Smatch issues   Peng Fan
• [PATCH] mmc: owl_mmc: Do not dereference data before NULL check   Peng Fan
  • [PATCH] mmc: owl_mmc: Do not dereference data before NULL check   Andrew Goodbody
    • [PATCH] mmc: owl_mmc: Do not dereference data before NULL check   Peng Fan
• [PATCH] mmc: rockchip_sdhci: Do not test unsigned for being less than 0   Peng Fan
• [PATCH v2 1/1] efi_loader: Support loading a ramdisk with bootefi   Heinrich Schuchardt
  • [PATCH v2 1/1] efi_loader: Support loading a ramdisk with bootefi   Ilias Apalodimas
    • [PATCH v2 1/1] efi_loader: Support loading a ramdisk with bootefi   Heinrich Schuchardt
      • [PATCH v2 1/1] efi_loader: Support loading a ramdisk with bootefi   Ilias Apalodimas
  • [PATCH v2 1/1] efi_loader: Support loading a ramdisk with bootefi   Mark Kettenis
• [PATCH v7 01/12] drivers: i3c: Add new i3c uclass id   Heiko Schocher
• [PATCH v7 02/12] drivers: i3c: Add driver for MIPI DWI3C   Heiko Schocher
• [PATCH v7 03/12] drivers: i3c: Add i3c uclass driver.   Heiko Schocher
  • [PATCH v7 03/12] drivers: i3c: Add i3c uclass driver.   AbuAleiz Ramy Al Shenqiti
• [PATCH v7 04/12] drivers: Enabled Kconfig and Makefile for i3c support   Heiko Schocher
• [PATCH v1 1/2] efi_loader: improve device path matching for partition lookup   Ilias Apalodimas
• [PATCH] disk: Use part_driver_lookup_type() to valid downloaded image   Ilias Apalodimas
  • [PATCH] disk: Use part_driver_lookup_type() to valid downloaded image   Javier Tia
• [PATCH v1 0/9] modify npcm7xx/8xx feature and bug fixed   Jim Liu
  • [PATCH v1 1/9] arm: dts: npcm8xx: add pinmux for VCD input   Jim Liu
  • [PATCH v1 2/9] pinctrl: npcm8xx: add support for setting VCD input source   Jim Liu
  • [PATCH v1 3/9] i2c: npcm: fix consecutive dm_i2c_read/write error   Jim Liu
  • [PATCH v1 4/9] net: phy: broadcom: add support for BCM54612E   Jim Liu
  • [PATCH v1 5/9] arm: dts: nuvoton: Change timer node   Jim Liu
  • [PATCH v1 6/9] net: designware: Fix get_timer value overflow   Jim Liu
  • [PATCH v1 7/9] misc: npcm_host_intf: Add Arbel eSPI workaround   Jim Liu
  • [PATCH v1 8/9] misc: npcm_host_intf: Disable pending KCS/BPC interrupts   Jim Liu
  • [PATCH v1 9/9] configs: npcm: remove CONFIG_SYS_SKIP_UART_INIT   Jim Liu
• [PATCH] net: ks8851_mll: Remove unreachable code   Andrew Goodbody
• [RFC 0/1] use lmb to calculate ram left for the kernel   Sughosh Ganu
  • [RFC 0/1] use lmb to calculate ram left for the kernel   Tomas Alvarez Vanoli
    • [RFC 1/1] lib: lmb: add lmb_get_reservable_size, fix ramfs   Tomas Alvarez Vanoli
  • [RFC 0/1] use lmb to calculate ram left for the kernel   Tomas Alvarez Vanoli
  • [RFC 0/1] use lmb to calculate ram left for the kernel   Sughosh Ganu
    • [RFC 0/1] use lmb to calculate ram left for the kernel   Tomas Alvarez Vanoli
      • [RFC 0/1] use lmb to calculate ram left for the kernel   Tomas Alvarez Vanoli
    • [RFC 0/1] use lmb to calculate ram left for the kernel   Sughosh Ganu
      • [RFC 0/1] use lmb to calculate ram left for the kernel   Tomas Alvarez Vanoli
      • [RFC 0/1] use lmb to calculate ram left for the kernel   Sughosh Ganu
      • [RFC 0/1] use lmb to calculate ram left for the kernel   Tomas Alvarez Vanoli
      • [RFC 0/1] use lmb to calculate ram left for the kernel   Sughosh Ganu
• [PATCH] net: ldpaa_eth: Fix buffer overflow in memset   Andrew Goodbody
• [PATCH] net: mediatek: Use correct variable for return   Andrew Goodbody
• [PATCH] net: mv88e6xxx: Fix logical operator instead of bitwise   Andrew Goodbody
• [PATCH v7 06/12] drivers: i3c: Add i3c sandbox simple test.   Heiko Schocher
• [PATCH v7 07/12] drivers: i3c: master: Enable probe i3c without slave device   Heiko Schocher
• [PATCH v2] net: fec_mxc: Set error code on error exit   Andrew Goodbody
  • [PATCH v2] net: fec_mxc: Set error code on error exit   Fabio Estevam
• [PATCH v7 08/12] i3c: master: dw-i3c-master: Fix OD_TIMING for spike filter   Heiko Schocher
• [PATCH v7 09/12] cmd: Add i3c command support.   Heiko Schocher
  • [PATCH v7 09/12] cmd: Add i3c command support.   Heiko Schocher
• [PATCH v7 10/12] test: cmd: Add simple test for i3c   Heiko Schocher
• [PATCH v7 11/12] configs: sandbox_defconfig: Enable configs for sandbox i3c   Heiko Schocher
• [PATCH v7 12/12] configs: agilex5_defconfig: Enable i3c configs for agilex5   Heiko Schocher
• Smatch issues reported for Marvell a38x DDR4   Tony Dinh
  • Smatch issues reported for Marvell a38x DDR4   Stefan Roese
    • Smatch issues reported for Marvell a38x DDR4   Tony Dinh
• [PATCH 0/4] net: mvpp2: Fix some Smatch reported issues   Andrew Goodbody
  • [PATCH 1/4] net: mvpp2: Fix impossible test   Andrew Goodbody
  • [PATCH 2/4] net: mvpp2: Return -ENOMEM for failed alloc   Andrew Goodbody
• [PATCH 3/4] net: mvpp2: Cannot test unsigned variable to be negative   Andrew Goodbody
• [PATCH 4/4] net: mvpp2: Use field just assigned in error test   Andrew Goodbody
• [PATCH 0/2] net: octeontx2: Fix two Smatch reports   Andrew Goodbody
  • [PATCH 1/2] net: octeontx2: Restore default value for err   Andrew Goodbody
  • [PATCH 2/2] net: octeontx2: NULL check before dereference   Andrew Goodbody
• [PATCH 0/3] net: octeontx: Fix some Smatch reported issues   Andrew Goodbody
  • [PATCH 1/3] net: octeontx: Remove unneeded code   Andrew Goodbody
  • [PATCH 2/3] net: octeontx: Remove unneeded test   Andrew Goodbody
  • [PATCH 3/3] net: octeontx: Free allocated memory on error   Andrew Goodbody
• [PATCH] net: phy: cortina: Ensure memory allocated is freed   Andrew Goodbody
  • [PATCH] net: phy: cortina: Ensure memory allocated is freed   Tom Rini
• [PATCH v2 0/2] Add support for AM62P SR1.2   Judith Mendez
  • [PATCH v2 1/2] soc: soc_ti_k3: Add support for AM62P variants   Judith Mendez
    • [PATCH v2 1/2] soc: soc_ti_k3: Add support for AM62P variants   Tom Rini
      • [PATCH v2 1/2] soc: soc_ti_k3: Add support for AM62P variants   Judith Mendez
      • [PATCH v2 1/2] soc: soc_ti_k3: Add support for AM62P variants   Tom Rini
      • [PATCH v2 1/2] soc: soc_ti_k3: Add support for AM62P variants   Judith Mendez
  • [PATCH v2 0/2] Add support for AM62P SR1.2   Judith Mendez
• [PATCH v2 2/2] mmc: am654_sdhci: Disable HS400 for AM62P SR1.0 and SR1.1   Judith Mendez
• [PATCH] disk: efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
  • [PATCH] disk: efi_loader: Improve disk image detection in efi_bootmgr   Heinrich Schuchardt
    • [PATCH] disk: efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
• Smatch report for drivers/net/phy/marvell10g.c   Andrew Goodbody
  • Smatch report for drivers/net/phy/marvell10g.c   Tom Rini
    • Smatch report for drivers/net/phy/marvell10g.c   Marek Vasut
      • Smatch report for drivers/net/phy/marvell10g.c   Marek Behún
• [PATCH v2 00/11] Various V3/S3/V3s fixes and improvements   Paul Kocialkowski
  • [PATCH v2 01/11] sunxi: Kconfig: Fix default order for V3s DRAM clock   Paul Kocialkowski
  • [PATCH v2 02/11] sunxi: Split V3 and V3s support with a common option   Paul Kocialkowski
    • [PATCH v2 02/11] sunxi: Split V3 and V3s support with a common option   Paul Kocialkowski
      • [PATCH v2 02/11] sunxi: Split V3 and V3s support with a common option   Icenowy Zheng
  • [PATCH v2 03/11] sunxi: Disable secure SRAM on sun8i platforms missing it   Paul Kocialkowski
  • [PATCH v2 04/11] power: axp: Add default voltages for V3/S3   Paul Kocialkowski
  • [PATCH v2 05/11] sunxi: Switch V3/V3s device-tree source to OF_UPSTREAM   Paul Kocialkowski
  • [PATCH v2 06/11] sunxi: Add support for I2C1 on PB pins for the V3/V3s   Paul Kocialkowski
    • [PATCH v2 06/11] sunxi: Add support for I2C1 on PB pins for the V3/V3s   Heiko Schocher
    • [PATCH v2 06/11] sunxi: Add support for I2C1 on PB pins for the V3/V3s   Paul Kocialkowski
  • [PATCH v2 07/11] sunxi: Add support for UART1 on PG pins for the V3/S3   Paul Kocialkowski
    • [PATCH v2 07/11] sunxi: Add support for UART1 on PG pins for the V3/S3   Paul Kocialkowski
  • [PATCH v2 08/11] sunxi: pinecube: Enable EMAC and network support   Paul Kocialkowski
  • [PATCH v2 09/11] sunxi: Add support for the Lichee Pi Zero with Dock   Paul Kocialkowski
  • [PATCH v2 10/11] net: sun8i-emac: Remove internal PHY config default value   Paul Kocialkowski
  • [PATCH v2 11/11] net: sun8i-emac: Add support for active-low leds with internal PHY   Paul Kocialkowski
• [PATCH 1/1] net: phy: Do not do CL22 phy reset before ethernet phy driver probe   Paul Kocialkowski
• [PATCH RFC] dts: imx8m{m,n,p,q}: Make optee packaging optional   Fabio Estevam
  • [PATCH RFC] dts: imx8m{m,n,p,q}: Make optee packaging optional   Fabio Estevam
• [PATCH] arm: imx: imx9: scmi: Fix booting from USB   Fabio Estevam
  • [PATCH] arm: imx: imx9: scmi: Fix booting from USB   Frieder Schrempf
• Request for Clarification Regarding CVE-2025-45512 Affecting U-Boot v1.1.3   rama
  • Request for Clarification Regarding CVE-2025-45512 Affecting U-Boot v1.1.3   Tom Rini
• [PATCH] arm64: renesas: r8a779g3: Disable MicroSD UHS modes on Retronix R-Car V4H Sparrow Hawk EVTA1   Marek Vasut
• [PATCH] arm64: renesas: r8a779g3: Disable dual-rank DRAM on Retronix R-Car V4H ES2 Sparrow Hawk   Marek Vasut
• [PATCH] arm64: renesas: r8a779g3: Enable xHCI USB on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
• [PATCH] arm64: dts: renesas: r8a779g3: Invert microSD voltage selector on Retronix R-Car V4H Sparrow Hawk EVTB1   Marek Vasut
  • [PATCH] arm64: dts: renesas: r8a779g3: Invert microSD voltage selector on Retronix R-Car V4H Sparrow Hawk EVTB1   Quentin Schulz
• [PATCH v1 0/3] socfpga: Agilex5: Fix dcache usage in SPL and SMC mailbox flow   Boon Khai Ng
  • [PATCH v1 1/3] arch: arm: mach-socfpga: smc: Add dcache flushing and invalidation in smc_send_mailbox()   Boon Khai Ng
  • [PATCH v1 2/3] arch: arm: lib: cache_v8: agilex5: Add weak function in cache_v8   Boon Khai Ng
    • [PATCH v1 2/3] arch: arm: lib: cache_v8: agilex5: Add weak function in cache_v8   Tom Rini
      • [PATCH v1 2/3] arch: arm: lib: cache_v8: agilex5: Add weak function in cache_v8   Ng, Boon Khai
      • [PATCH v1 2/3] arch: arm: lib: cache_v8: agilex5: Add weak function in cache_v8   Tom Rini
      • [PATCH v1 2/3] arch: arm: lib: cache_v8: agilex5: Add weak function in cache_v8   Ng, Boon Khai
  • [PATCH v1 3/3] configs: agilex5: Enable config SPL_SYS_DCACHE_OFF   Boon Khai Ng
• [PATCH] i2c: rcar_iic: Do not use unitialised variable   Heiko Schocher
  • [PATCH] i2c: rcar_iic: Do not use unitialised variable   Marek Vasut
• [PATCH v1 0/2] lwip: add Kconfig to decode and print ICMP unreachable messages   Jerome Forissier
  • [PATCH v1 1/2] lwip: icmp: allow reporting ICMP detination unreachable   Jerome Forissier
  • [PATCH v1 2/2] net: lwip: add Kconfig option to show ICMP unreachable errors   Jerome Forissier
  • [PATCH v1 0/2] lwip: add Kconfig to decode and print ICMP unreachable messages   Peter Robinson
    • [PATCH v1 0/2] lwip: add Kconfig to decode and print ICMP unreachable messages   Jerome Forissier
      • [PATCH v1 0/2] lwip: add Kconfig to decode and print ICMP unreachable messages   Tom Rini
      • [PATCH v1 0/2] lwip: add Kconfig to decode and print ICMP unreachable messages   Jerome Forissier
• [PATCH] net: phy: vitesse: Fix incorrect test for timeout   Andrew Goodbody
  • [PATCH] net: phy: vitesse: Fix incorrect test for timeout   Quentin Schulz
    • [PATCH] net: phy: vitesse: Fix incorrect test for timeout   Andrew Goodbody
• [PATCH] net: rswitch: Fix error detection   Andrew Goodbody
  • [PATCH] net: rswitch: Fix error detection   Marek Vasut
• [PATCH] net: ti: am65-cpsw-nuss: Initialise ret   Andrew Goodbody
  • [PATCH] net: ti: am65-cpsw-nuss: Initialise ret   Tom Rini
• [PATCH] net: ti: icssg: Remove impossible test   Andrew Goodbody
  • [PATCH] net: ti: icssg: Remove impossible test   Tom Rini
• [PATCH] net: axi_emac: Fix timeout test   Andrew Goodbody
  • [PATCH] net: axi_emac: Fix timeout test   Michal Simek
    • [PATCH] net: axi_emac: Fix timeout test   Andrew Goodbody
• [PATCH] pci: apple: i needs to be initialised and used   Andrew Goodbody
  • [PATCH] pci: apple: i needs to be initialised and used   Tom Rini
    • [PATCH] pci: apple: i needs to be initialised and used   Mark Kettenis
• [PATCH 1/1] doc: spl: fix typo 'TPL' to 'VPL'   Leo Yu-Chi Liang
  • [PATCH 1/1] doc: spl: fix typo 'TPL' to 'VPL'   Heinrich Schuchardt
• [PATCH v2] dts: imx8m{m,n,p,q}: Make optee packaging optional   Yannic Moog
  • [PATCH v2] dts: imx8m{m,n,p,q}: Make optee packaging optional   Fabio Estevam
• Please pull u-boot-i2c master   Heiko Schocher
  • Please pull u-boot-i2c master   Tom Rini
• [PATCH v2 1/2] arm64: dts: renesas: r8a779g3: Describe generic SPI NOR support on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
  • [PATCH v2 2/2] arm64: renesas: r8a779g3: Enable Winbond SPI NOR support on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
  • [PATCH v2 1/2] arm64: dts: renesas: r8a779g3: Describe generic SPI NOR support on Retronix R-Car V4H Sparrow Hawk board   Quentin Schulz
• [PATCH 1/2] timer: fttmr010_timer: Remove unused driver   Tom Rini
  • [PATCH 2/2] timer: Tighten some timer driver dependencies   Tom Rini
  • [PATCH 1/2] timer: fttmr010_timer: Remove unused driver   Tom Rini
• [PATCH 1/3] tpm: tpm_tis_st33zp24: Remove unused drivers   Tom Rini
  • [PATCH 2/3] tpm: cr50_i2c: Make use of 'z' for printing size_t   Tom Rini
    • [PATCH 2/3] tpm: cr50_i2c: Make use of 'z' for printing size_t   Ilias Apalodimas
  • [PATCH 3/3] tpm: tpm_tis_infineon: Make use of 'z' for printing size_t   Tom Rini
    • [PATCH 3/3] tpm: tpm_tis_infineon: Make use of 'z' for printing size_t   Ilias Apalodimas
  • [PATCH 1/3] tpm: tpm_tis_st33zp24: Remove unused drivers   Ilias Apalodimas
• [PATCH 1/7] usb: dwc3: Tighten driver glue dependencies   Tom Rini
  • [PATCH 2/7] usb: gadget: Tighten requirements on USB_GADGET_ATMEL_USBA   Tom Rini
  • [PATCH 3/7] usb: gadget: bcm_udc_otg: Remove unused driver   Tom Rini
  • [PATCH 4/7] usb: gadget: max3420_udc: Remove unused driver   Tom Rini
  • [PATCH 5/7] usb: host: Tighten USB host driver dependencies   Tom Rini
  • [PATCH 6/7] usb: host: Tighten USB musb-new host glue driver dependencies   Tom Rini
  • [PATCH 7/7] usb: musb: Remove most of the legacy MUSB code   Tom Rini
    • [PATCH 7/7] usb: musb: Remove most of the legacy MUSB code   Peter Robinson
      • [PATCH 7/7] usb: musb: Remove most of the legacy MUSB code   Tom Rini
• [PATCH] watchdog: Tighten some watchdog driver dependencies   Tom Rini
  • [PATCH] watchdog: Tighten some watchdog driver dependencies   Stefan Roese
• [PATCH 1/8] video: tidss: Remove unused drivers   Tom Rini
  • [PATCH 2/8] video: mali_dp: Remove unused driver   Tom Rini
  • [PATCH 3/8] video: tegra: Rework some of the driver dependencies   Tom Rini
    • [PATCH 3/8] video: tegra: Rework some of the driver dependencies   Svyatoslav Ryhel
  • [PATCH 4/8] video: Tighten some video driver dependencies   Tom Rini
  • [PATCH 5/8] video: anx9804: Only build when needed   Tom Rini
    • [PATCH 5/8] video: anx9804: Only build when needed   Tom Rini
  • [PATCH 6/8] video: ihs_video_out: Add missing <asm/io.h> to ihs_video_out.c   Tom Rini
  • [PATCH 7/8] video: sharp-lq101r1sx01: Do not make use of 'z' for printing non-size_t   Tom Rini
  • [PATCH 8/8] video: stm32: stm32_ltdc: Add missing <linux/sizes.h> to stm32_ltdc.c   Tom Rini
  • [PATCH 1/8] video: tidss: Remove unused drivers   Swamil Jain
    • [PATCH 1/8] video: tidss: Remove unused drivers   Tom Rini
      • [PATCH 1/8] video: tidss: Remove unused drivers   Swamil Jain
• [PATCH v3 1/2] arm64: dts: renesas: r8a779g3: Describe generic SPI NOR support on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
  • [PATCH v3 2/2] arm64: renesas: r8a779g3: Enable Winbond SPI NOR support on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
  • [PATCH v3 1/2] arm64: dts: renesas: r8a779g3: Describe generic SPI NOR support on Retronix R-Car V4H Sparrow Hawk board   Quentin Schulz
• [PATCH 0/2] phy: cadence: Fix two Smatch reported issues   Andrew Goodbody
  • [PATCH 1/2] phy: cadence: sierra: Remove variable that is not assigned to   Andrew Goodbody
    • [PATCH 1/2] phy: cadence: sierra: Remove variable that is not assigned to   Jerome Forissier
      • [PATCH 1/2] phy: cadence: sierra: Remove variable that is not assigned to   Andrew Goodbody
  • [PATCH 2/2] phy: cadence: torrent: Set an error code for return   Andrew Goodbody
• [PATCH] phy: keystone-usb: Do not negate return code   Andrew Goodbody
  • [PATCH] phy: keystone-usb: Do not negate return code   Tom Rini
• [PATCH 0/2] phy: marvell: Fix two Smatch reported issues   Andrew Goodbody
  • [PATCH 2/2] phy: marvell: Cannot test unsigned field to be negative   Andrew Goodbody
    • [PATCH 2/2] phy: marvell: Cannot test unsigned field to be negative   Stefan Roese
• [PATCH 1/2] phy: marvell: Fix off by 1 limit checks   Andrew Goodbody
  • [PATCH 1/2] phy: marvell: Fix off by 1 limit checks   Stefan Roese
• [PATCH] phy: qcom: Fix ret is uninitialised   Andrew Goodbody
  • [PATCH] phy: qcom: Fix ret is uninitialised   Sumit Garg
  • [PATCH] phy: qcom: Fix ret is uninitialised   Casey Connolly
• [PATCH] phy: ti: j721e-wiz: Set error code before goto   Andrew Goodbody
  • [PATCH] phy: ti: j721e-wiz: Set error code before goto   Tom Rini
• [PATCH 0/4] cmd: nand: various updates   david regan
  • [PATCH 1/4] cmd: nand: bug fix MTD_OOB_AUTO to MTD_OPS_AUTO_OOB   david regan
    • [PATCH 1/4] cmd: nand: bug fix MTD_OOB_AUTO to MTD_OPS_AUTO_OOB   Quentin Schulz
      • [PATCH 1/4] cmd: nand: bug fix MTD_OOB_AUTO to MTD_OPS_AUTO_OOB   Michael Nazzareno Trimarchi
      • [PATCH 1/4] cmd: nand: bug fix MTD_OOB_AUTO to MTD_OPS_AUTO_OOB   David Regan
  • [PATCH 2/4] cmd: nand: more descriptive help info   david regan
  • [PATCH 3/4] cmd: nand: nand dump display update   david regan
  • [PATCH 4/4] cmd: nand: nand dump with ecc option   david regan
• [PATCH] pci: pcie-rcar-gen4: Fix PHY initialization   Marek Vasut
• [PATCH] arm64: dts: renesas: r8a779g3: Set VDDQ18_25_AVB voltage on Retronix R-Car V4H Sparrow Hawk EVTB1   Marek Vasut
  • [PATCH] arm64: dts: renesas: r8a779g3: Set VDDQ18_25_AVB voltage on Retronix R-Car V4H Sparrow Hawk EVTB1   Quentin Schulz
• [PULL] u-boot-sh/master   Marek Vasut
  • [PULL] u-boot-sh/master   Tom Rini
  • [PULL] u-boot-sh/master   Marek Vasut
    • [PULL] u-boot-sh/master   Tom Rini
• [PATCH 00/10] samsung: e850-96: Enable USB host and Ethernet   Sam Protsenko
  • [PATCH 02/10] board: samsung: e850-96: Set ethaddr   Sam Protsenko
  • [PATCH 03/10] board: samsung: e850-96: Add ACPM code   Sam Protsenko
  • [PATCH 04/10] board: samsung: e850-96: Add PMIC code   Sam Protsenko
  • [PATCH 05/10] board: samsung: e850-96: Configure PMIC regulators   Sam Protsenko
  • [PATCH 06/10] board: samsung: e850-96: Extract device info from fw loading code   Sam Protsenko
  • [PATCH 07/10] board: samsung: e850-96: Add bootdev var to choose boot device   Sam Protsenko
  • [PATCH 08/10] configs: e850-96: Disable CONFIG_DEFAULT_FDT_FILE   Sam Protsenko
  • [PATCH 09/10] configs: e850-96: Enable USB host support   Sam Protsenko
  • [PATCH 10/10] configs: e850-96: Enable Ethernet   Sam Protsenko
• [PATCH 01/10] usb: host: dwc3-of-simple: Add exynos850 compatible   Sam Protsenko
• [PATCH v2 2/2] imx95_evk: Restore support for i.MX95 A0 silicon   Tim Harvey
  • 回复: [EXT] Re: [PATCH v2 2/2] imx95_evk: Restore support for i.MX95 A0 silicon   Alice Guo (OSS)
  • [PATCH v2 2/2] imx95_evk: Restore support for i.MX95 A0 silicon   Fabio Estevam
• [PATCH v2 1/9] ram: k3-ddrss: Use DDR address instead of system address for ecc_regions   Kumar, Udit
  • [PATCH v2 1/9] ram: k3-ddrss: Use DDR address instead of system address for ecc_regions   Neha Malcom Francis
• [PATCH v2 2/9] ram: k3-ddrss: s/K3_DDRSS_MAX_ECC_REGIONS/K3_DDRSS_MAX_ECC_REG   Kumar, Udit
• [PATCH v2 3/9] ram: k3-ddrss: Add comment about ecc_reserved_space   Kumar, Udit
  • [PATCH v2 3/9] ram: k3-ddrss: Add comment about ecc_reserved_space   Neha Malcom Francis
• [PATCH v2 4/9] ram: k3-ddrss: Add support for a partial inline ECC region   Kumar, Udit
  • [PATCH v2 4/9] ram: k3-ddrss: Add support for a partial inline ECC region   Neha Malcom Francis
• [PATCH v2 5/9] ram: k3-ddrss: Add CONFIG_K3_MULTI_DDR   Kumar, Udit
• [PATCH v2 6/9] ram: k3-ddrss: Add support for number of controllers under MSMC   Kumar, Udit
• [PATCH v2 7/9] ram: k3-ddrss: Add support for MSMC calculation of DDR inline ECC regions   Kumar, Udit
• [PATCH v2 8/9] ram: k3-ddrss: Add support for partial inline ECC in multi-DDR systems   Kumar, Udit
  • [PATCH v2 8/9] ram: k3-ddrss: Add support for partial inline ECC in multi-DDR systems   Neha Malcom Francis
• [PATCH v2 9/9] ram: k3-ddrss: Support multiple ECC regions for a single controller   Kumar, Udit
• [PATCH v2] net: designware: Fix get_timer value overflow   Jim Liu
• [PATCH v2] net: phy: broadcom: add support for BCM54612E   Jim Liu
• [PATCH v2 0/7] modify npcm7xx/8xx feature and bug fixed   Jim Liu
  • [PATCH v2 1/7] arm: dts: npcm8xx: add pinmux for VCD input   Jim Liu
  • [PATCH v2 2/7] pinctrl: npcm8xx: add support for setting VCD input source   Jim Liu
  • [PATCH v2 3/7] i2c: npcm: fix consecutive dm_i2c_read/write error   Jim Liu
  • [PATCH v2 4/7] arm: dts: nuvoton: Change timer node   Jim Liu
  • [PATCH v2 5/7] misc: npcm_host_intf: Add Arbel eSPI workaround   Jim Liu
  • [PATCH v2 6/7] misc: npcm_host_intf: Disable pending KCS/BPC interrupts   Jim Liu
  • [PATCH v2 7/7] configs: npcm: remove CONFIG_SYS_SKIP_UART_INIT   Jim Liu
• [PATCH 00/10] Add RK3368 YMD8_MB board support   WeiHao Li
  • [PATCH 01/10] clk: rockchip: rk3368: fix gmac clock error   WeiHao Li
  • [PATCH 02/10] mmc: rockchip: fix clock get wrong index   WeiHao Li
    • [PATCH 02/10] mmc: rockchip: fix clock get wrong index   Jonas Karlman
      • [PATCH 02/10] mmc: rockchip: fix clock get wrong index   李维豪
  • [PATCH 03/10] net: rockchip: rk3368: add set_to_rmii   WeiHao Li
  • [PATCH 04/10] clk: rockchip: rk3368: Add bus clk get/set   WeiHao Li
  • [PATCH 05/10] clk: rockchip: rk3368: Adjust pll clk get   WeiHao Li
  • [PATCH 06/10] clk: rockchip: rk3368: Add vop clk get/set   WeiHao Li
  • [PATCH 07/10] video: rockchip: vop add bridge support   WeiHao Li
  • [PATCH 08/10] video: rockchip: add rk3368 vop support   WeiHao Li
  • [PATCH 09/10] video: panel: add rm72014 panel support   WeiHao Li
  • [PATCH 10/10] board: rockchip: add rk3368 ymd8_mb support   WeiHao Li
    • [PATCH 10/10] board: rockchip: add rk3368 ymd8_mb support   Quentin Schulz
      • [PATCH 10/10] board: rockchip: add rk3368 ymd8_mb support   李维豪
      • [PATCH 10/10] board: rockchip: add rk3368 ymd8_mb support   Quentin Schulz
• [PATCH v6 0/4] Add Onion Omega2/2+ board support   Philip Oberfichtner
  • [PATCH v6 1/4] Makefile: Simplify size check   Philip Oberfichtner
  • [PATCH v6 2/4] Makefile: Add size check for u-boot-with-spl.bin   Philip Oberfichtner
    • [PATCH v6 2/4] Makefile: Add size check for u-boot-with-spl.bin   Marek Vasut
      • [PATCH v6 2/4] Makefile: Add size check for u-boot-with-spl.bin   Philip Oberfichtner
  • [PATCH v6 3/4] mips: serial: Silence "unused variable" warning   Philip Oberfichtner
    • [PATCH v6 3/4] mips: serial: Silence "unused variable" warning   Daniel Schwierzeck
  • [PATCH v6 4/4] mips: mt7628: Add Onion Omega2/2+ board support   Philip Oberfichtner
    • [PATCH v6 4/4] mips: mt7628: Add Onion Omega2/2+ board support   Daniel Schwierzeck
  • [PATCH v6 0/4] Add Onion Omega2/2+ board support   Philip Oberfichtner
• [PATCH 1/4] test/py: Correctly restore the DT after capsule tests   Ilias Apalodimas
  • [PATCH 2/4] test/py: Read from the correct offset when initializing capsules   Ilias Apalodimas
    • [PATCH 2/4] test/py: Read from the correct offset when initializing capsules   Tom Rini
  • [PATCH 3/4] test/py: Fix race conditions on EFI capsule tests   Ilias Apalodimas
  • [PATCH 4/4] test/py: Fix capsule update tests   Ilias Apalodimas
  • [PATCH 1/4] test/py: Correctly restore the DT after capsule tests   Tom Rini
• [PATCH] pinctrl: nexell: Cannot test unsigned to be negative   Andrew Goodbody
  • [PATCH] pinctrl: nexell: Cannot test unsigned to be negative   Michael Nazzareno Trimarchi
    • [PATCH] pinctrl: nexell: Cannot test unsigned to be negative   Andrew Goodbody
  • [PATCH] pinctrl: nexell: Cannot test unsigned to be negative   Stefan Bosch
• [PATCH 0/4] pinctrl: Address some issues reported by Smatch   Andrew Goodbody
  • [PATCH 2/4] pinctrl: stmfx: Remove duplicated code   Andrew Goodbody
  • [PATCH 3/4] pinctrl: zynqmp: Ensure ret is initialised   Andrew Goodbody
    • [PATCH 3/4] pinctrl: zynqmp: Ensure ret is initialised   Michal Simek
  • [PATCH 4/4] pinctrl: zynqmp: Avoid using uninitialised variable   Andrew Goodbody
    • [PATCH 4/4] pinctrl: zynqmp: Avoid using uninitialised variable   Michal Simek
  • (subset) [PATCH 0/4] pinctrl: Address some issues reported by Smatch   Tom Rini
• [PATCH 1/4] pinctrl: single: Remove unreachable code   Andrew Goodbody
• [PATCH v2 0/3] Simplify image size checks   Philip Oberfichtner
  • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Philip Oberfichtner
    • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Marek Vasut
      • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Tom Rini
      • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Marek Vasut
      • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Tom Rini
      • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Marek Vasut
      • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Tom Rini
      • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Philip Oberfichtner
      • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Philip Oberfichtner
      • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Philip Oberfichtner
• [PATCH v2 2/3] Image size checks: Move all configs in one place   Philip Oberfichtner
• [PATCH v2 3/3] Image size checks: Simplify help text   Philip Oberfichtner
  • [PATCH v2 3/3] Image size checks: Simplify help text   Marek Vasut
    • [PATCH v2 3/3] Image size checks: Simplify help text   Philip Oberfichtner
      • [PATCH v2 3/3] Image size checks: Simplify help text   Heinrich Schuchardt
      • [PATCH v2 3/3] Image size checks: Simplify help text   Marek Vasut
      • [PATCH v2 3/3] Image size checks: Simplify help text   Philip Oberfichtner
• [RFC PATCH v1 3/3] Image size checks: Move all configs in one place   Philip Oberfichtner
• [PATCH 0/2] pinctrl: qcom: Address two Smatch reported issues   Andrew Goodbody
  • [PATCH 1/2] pinctrl: qcom: sa8775: Limit check for array index not correct   Andrew Goodbody
  • [PATCH 2/2] pinctrl: qcom: sdm845: Limit check off by 1   Andrew Goodbody
  • [PATCH 0/2] pinctrl: qcom: Address two Smatch reported issues   Casey Connolly
  • [PATCH 0/2] pinctrl: qcom: Address two Smatch reported issues   Casey Connolly
• [PATCH v2 0/2] Restore support for i.MX95 A0 silicon   Fabio Estevam
• [PATCH] pinctrl: rzg2l: Variable may not have been assigned to   Andrew Goodbody
  • [PATCH] pinctrl: rzg2l: Variable may not have been assigned to   Paul Barker
    • [PATCH] pinctrl: rzg2l: Variable may not have been assigned to   Andrew Goodbody
• [PATCH 0/6] Add Andes Voyager board support   Leo Yu-Chi Liang
• [PATCH 1/6] riscv: board: Add Andes Voyager board Kconfig support   Leo Yu-Chi Liang
• [PATCH 2/6] riscv: dts: andes: Add Voyager device tree   Leo Yu-Chi Liang
• [PATCH 3/6] board: MAINTAINERS: Add Voyager board maintainer   Leo Yu-Chi Liang
• [PATCH 4/6] board: andestech: Add Voyager board support   Leo Yu-Chi Liang
• [PATCH 5/6] configs: andes: add Voyager board defconfig   Leo Yu-Chi Liang
• [PATCH 6/6] doc: board: voyager: Add documentation for Voyager   Leo Yu-Chi Liang
• [PATCH 1/2] imx9: soc: Reuse and export low_drive_freq_update()   Primoz Fiser
  • [PATCH 1/2] imx9: soc: Reuse and export low_drive_freq_update()   Fabio Estevam
• [PATCH 2/2] board: phytec: phycore-imx93: Add VOLT_LOW_DRIVE frequency fixup   Primoz Fiser
• [PATCH 0/2] power: Address two Smatch reported issues   Andrew Goodbody
  • [PATCH 1/2] power: axp: Remove redundant code   Andrew Goodbody
    • [PATCH 1/2] power: axp: Remove redundant code   Quentin Schulz
  • [PATCH 2/2] power: power_i2c: ret is uninitialised if not DM_I2C   Andrew Goodbody
    • [PATCH 2/2] power: power_i2c: ret is uninitialised if not DM_I2C   Quentin Schulz
• [PATCH v2] pinctrl: rzg2l: Variable may not have been assigned to   Andrew Goodbody
• [PATCH] clk: Return value calculated by ERR_PTR   Andrew Goodbody
• [PATCH] cmd: mtd: Prevent use of uninitialised variable   Andrew Goodbody
• [PATCH] mtd: nand: Prevent dereference of NULL pointer   Andrew Goodbody
  • [PATCH] mtd: nand: Prevent dereference of NULL pointer   Michael Nazzareno Trimarchi
• [PATCH] power: regulator: Fix incorrect use of binary and   Andrew Goodbody
• [PATCH] power: pfuze100: Ensure loop index is incremented   Andrew Goodbody
• [PATCH] adc: meson-saradc: uint cannot be less than zero   Andrew Goodbody
• [PATCH] sata: sata_mv: Remove always true test   Andrew Goodbody
  • [PATCH] sata: sata_mv: Remove always true test   Stefan Roese
• [PATCH] button: qcom-pmic: Fix dereference of uninitialised pointer   Andrew Goodbody
  • [PATCH] button: qcom-pmic: Fix dereference of uninitialised pointer   Casey Connolly
• [PATCH 0/2] clk: at91: Fix issues found by Smatch   Andrew Goodbody
  • [PATCH 0/2] clk: at91: Fix issues found by Smatch   Eugen Hristev
• [PATCH 0/2] clk: versaclock: Fix two issues found by Smatch   Andrew Goodbody
• [PATCH] clk: exynos: Fix always true test   Andrew Goodbody
• [PATCH] clk: imx: Free pll on error path   Andrew Goodbody
  • [PATCH] clk: imx: Free pll on error path   Fabio Estevam
• [PATCH] clk: meson: Remove unreachable code   Andrew Goodbody
• [PATCH 0/6] power: regulator: Fix some Smatch reported issues   Andrew Goodbody
  • [PATCH 1/6] power: regulator: lp873x: Cannot test unsigned for being negative   Andrew Goodbody
  • [PATCH 2/6] power: regulator: lp87565: Cannot test unsigned for being negative   Andrew Goodbody
  • [PATCH 3/6] power: regulator: palmas: Cannot test unsigned for being negative   Andrew Goodbody
  • [PATCH 4/6] power: regulator: rzg2l-usbphy: Add parenthesis to return expression   Andrew Goodbody
  • [PATCH 5/6] power: regulator: tps65910: Cannot test unsigned for being negative   Andrew Goodbody
  • [PATCH 6/6] power: regulator: tps65941: Cannot test unsigned for being negative   Andrew Goodbody
• [PATCH] arch/riscv/lib: update memmove and memcpy for big-endian   Ben Dooks
  • [PATCH] arch/riscv/lib: update memmove and memcpy for big-endian   Leo Liang
• [PATCH v2 1/2] binman: add a new entry type for generating a data file which is passed to mkimage with -n   Marek Vasut
• [PATCH 0/2] arm: dts: k3-am62a: remove GP security variant for AM62A   Tom Rini
• [PATCH v1] drivers: scsi: fix inaccurate block count reporting in scsi operations   Tom Rini
• [PATCH] mtd: spi-nor: Fix return value of s25_s28_mdp_ready()   Tom Rini
• [PATCH] meminfo: correct "free" memory region size   Tom Rini
• [PATCH 1/1] virtio: fix freeing of virtio ring buffer   Tom Rini
• [PATCH] pylibfdt: setup.py: Drop license_files   Tom Rini
• Smatch report for Cadence PWM   Andrew Goodbody
  • Smatch report for Cadence PWM   Michal Simek
• [PATCH] configs: Simplify Agilex7 VAB defconfig   Naresh Kumar Ravulapalli
  • [PATCH] configs: Simplify Agilex7 VAB defconfig   Chee, Tien Fong
• [PATCH] pwm: meson: Stop premature exit from for loop   Andrew Goodbody
• [PATCH] drivers: ddr: altera: Check IOSSM mailbox compatibility   Naresh Kumar Ravulapalli
  • [PATCH] drivers: ddr: altera: Check IOSSM mailbox compatibility   Chee, Tien Fong
• [PATCH] arch: arm: dts: agilex5: Disable cache allocation for reads   Naresh Kumar Ravulapalli
  • [PATCH] arch: arm: dts: agilex5: Disable cache allocation for reads   Chee, Tien Fong
• [PATCH] drivers: ddr: altera: Correct DDR calibration status check   Naresh Kumar Ravulapalli
  • [PATCH] drivers: ddr: altera: Correct DDR calibration status check   Chee, Tien Fong
• [PATCH 0/4] Enable USB 3.1 for Agilex5 SoCFPGA   Naresh Kumar Ravulapalli
  • [PATCH 2/4] configs: Enable USB DWC3 host drivers for Agilex5   Naresh Kumar Ravulapalli
  • [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Naresh Kumar Ravulapalli
  • [PATCH 4/4] arch: arm: socfpga: Configure USB3 System Manager registers   Naresh Kumar Ravulapalli
• [PATCH 1/4] arch: arm: dts: Enable USB3.1 for Agilex5   Naresh Kumar Ravulapalli
• [PATCH] drivers: qe: avoid double free()   Andrew Goodbody
• [PATCH] ram: k3-ddrss: Use logical and not bitwise   Andrew Goodbody
  • [PATCH] ram: k3-ddrss: Use logical and not bitwise   Tom Rini
• [PATCH] ram: renesas: dbsc5: Fix off by 1 errors   Andrew Goodbody
• [PATCH] MAINTAINERS: update email address of Heiko Schocher   Heiko Schocher
  • [PATCH] MAINTAINERS: update email address of Heiko Schocher   Tom Rini
• [PATCH 0/2] remoteproc: k3: Fix two Smatch issue reports   Andrew Goodbody
  • [PATCH 1/2] remoteproc: ti_k3_arm64: Cannot set or compare u8 to 16bits   Andrew Goodbody
  • [PATCH 2/2] remoteproc: k3-r5: Ensure ret is initialised   Andrew Goodbody
• [PATCH 1/1] soc: xilinx: zynqmp: Fix zu1cg device detection   boewingloh.linux at gmail.com
  • [PATCH 1/1] soc: xilinx: zynqmp: Fix zu1cg device detection   Michal Simek
• [GIT PULL] Please pull u-boot-imx-master-20250808   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-master-20250808   Tom Rini
• [PATCH] imx: scu_api: Remove unnecessary NULL check   Fabio Estevam
• [PATCH] cpu: imx8_cpu: Provide default temperatures   Fabio Estevam
• [PATCH] imx8m: clock: Correct imx8mm_fracpll_tbl   Fabio Estevam
• [PATCH] ARM: imx6: dh-imx6: Enable USB OTG ID pin pull up in SPL   Fabio Estevam
• [PATCH] configs:imx8ulp: Enable temperature command   Fabio Estevam
• [PATCH 0/2] stm32mp2: RIFSC system bus driver fixes   Patrice Chotard
  • [PATCH 2/2] ARM: stm32mp: replace RIFSC check access APIs   Patrice Chotard
• [PATCH 1/2] ARM: stm32mp: fix RIFSC semaphores acquisition   Patrice Chotard
• [PATCH 0/5] stm32mp2: Add SPI flashes support   Patrice Chotard
  • [PATCH 0/5] stm32mp2: Add SPI flashes support   Marek Vasut
    • [PATCH 0/5] stm32mp2: Add SPI flashes support   Patrice CHOTARD
• [PATCH 1/5] ioport: Add resource check helpers   Patrice Chotard
• [PATCH 2/5] memory: Add STM32 Octo Memory Manager driver   Patrice Chotard
• [PATCH 3/5] spi: Add STM32MP2 Octo-SPI driver support   Patrice Chotard
• [PATCH 4/5] configs: stm32mp25: Enable configs flags related to SPI flashes.   Patrice Chotard
• [PATCH 5/5] ARM: dts: Add flash0 partitions for stm32mp257f-ev1-u-boot   Patrice Chotard
• Pull request efi-2025-10-rc2   Heinrich Schuchardt
  • Pull request efi-2025-10-rc2   Tom Rini
• Pull request: SoCFPGA changes for u-boot-socfpga-next-20250808   Chee, Tien Fong
• [PATCH v2] disk: efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
  • [PATCH v2] disk: efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
• [PATCH v1 5/5] test: Add test case for FIT image load address overlap detection   Aristo Chen
  • [PATCH v1 5/5] test: Add test case for FIT image load address overlap detection   Yannic Moog
• [PATCH v1 4/5] tools: mkimage: detect overlapping load regions in FIT configurations   Aristo Chen
  • [PATCH v1 4/5] tools: mkimage: detect overlapping load regions in FIT configurations   Yannic Moog
• [PATCH 1/1] starfive: fix return code of `mac write_eeprom`   Heinrich Schuchardt
  • [PATCH 1/1] starfive: fix return code of `mac write_eeprom`   E Shattow
    • [PATCH 1/1] starfive: fix return code of `mac write_eeprom`   Heinrich Schuchardt
  • [PATCH 1/1] starfive: fix return code of `mac write_eeprom`   Hal Feng
• [PATCH v1 0/1] Tegra114: add support for Microsoft Surface 2   Svyatoslav Ryhel
  • [PATCH v1 1/1] board: microsoft: add Microsoft Surface 2 support   Svyatoslav Ryhel
• [PATCH v3 0/3] rockchip: Add initial RK3582 support   Jonas Karlman
  • [PATCH v3 1/3] rockchip: Add initial RK3582 support   Jonas Karlman
    • [PATCH v3 1/3] rockchip: Add initial RK3582 support   Quentin Schulz
      • [PATCH v3 1/3] rockchip: Add initial RK3582 support   Jonas Karlman
      • [PATCH v3 1/3] rockchip: Add initial RK3582 support   Quentin Schulz
      • [PATCH v3 1/3] rockchip: Add initial RK3582 support   Kever Yang
  • [PATCH v3 2/3] rockchip: rk3588-generic: Enable support for RK3582   Jonas Karlman
  • [PATCH v3 3/3] rockchip: rk3588s-rock-5c: Add support for ROCK 5C Lite variant   Jonas Karlman
• [PATCH 00/10] doc: minor fixes and improvements   Adriano Carvalho
  • [PATCH 01/10] doc: Fix typo in doc/build/clang.rst   Adriano Carvalho
  • [PATCH 02/10] doc: Fix typos and improve wording in doc/build/tools.rst   Adriano Carvalho
  • [PATCH 03/10] doc: Fix typos and improve wording in tools/buildman/buildman.rst   Adriano Carvalho
  • [PATCH 04/10] doc: Quote all long form options using double ticks in tools/buildman/buildman.rst   Adriano Carvalho
  • [PATCH 05/10] doc: Ensure consistency of "buildman" (in the middle of a sentence) and "Buildman" (at the beggining of a sentence) in tools/buildman/buildman.rst   Adriano Carvalho
  • [PATCH 06/10] doc: Add riscv to the list of architectures in tools/buildman/buildman.rst   Adriano Carvalho
  • [PATCH 07/10] doc: Fix typo in doc/build/documentation.rst   Adriano Carvalho
  • [PATCH 08/10] doc: Fix typo in doc/build/gen_compile_commands.rst   Adriano Carvalho
  • [PATCH 09/10] doc: Use a long dash instead in tools/buildman/buildman.rst   Adriano Carvalho
  • [PATCH 10/10] doc: Fix typo in tools/buildman/buildman.rst   Adriano Carvalho
• How to avoid the need to run 'env default' command on modified env variable   Mircea Carausu
  • How to avoid the need to run 'env default' command on modified env variable   Quentin Schulz
    • How to avoid the need to run 'env default' command on modified env variable   Mircea Carausu
      • How to avoid the need to run 'env default' command on modified env variable   Rasmus Villemoes
• [PATCH] riscv: cpu: Use CONFIG_IS_ENABLED(CPU) instead of plain ifdef   Leo Liang
• [PATCH] configs: sama7d65_curiosity: Resync with savedefconfig   Mihai Sain
  • [PATCH] configs: sama7d65_curiosity: Resync with savedefconfig   Eugen Hristev
• [PATCH] Fix detection of odd memory configurations on sunxi   Rudi Horn
  • [PATCH] Fix detection of odd memory configurations on sunxi   Jernej Škrabec
    • [PATCH] Fix detection of odd memory configurations on sunxi   Rudi Horn
• [PATCH 4/4] riscv: Increase Microchip Icicle's SYS_BOOTM_LEN   Leo Liang
• [PATCH] mach-snapdragon: fix erroneous lmb allocations   Casey Connolly
  • [PATCH] mach-snapdragon: fix erroneous lmb allocations   Tom Rini
  • [PATCH] mach-snapdragon: fix erroneous lmb allocations   Casey Connolly
• [PATCH 1/4] xilinx: mbv: Disable OF_HAS_PRIOR_STAGE   Leo Liang
• [PATCH 2/4] xilinx: mbv: Add missing mmu-type cpu property   Leo Liang
• [PATCH 3/4] xilinx: mbv: Fix dt properties in interrupt controller node   Leo Liang
• [PATCH 4/4] xilinx: mbv: Use separate DTB for binman nodes   Leo Liang
• [PATCH] board: spacemit: Add SpacemiT MUSE Pi Pro   Leo Liang
• [PATCH] efi: serial: Use correct EFI status type   Andrew Goodbody
• [PATCH] arm: imx: imx9: soc: Fix env location when booting from USB   João Paulo Gonçalves
  • [PATCH] arm: imx: imx9: soc: Fix env location when booting from USB   João Paulo Gonçalves
• [PATCH v2] arm: imx: imx9: soc: Fix env location when booting from USB   João Paulo Gonçalves
  • [PATCH v2] arm: imx: imx9: soc: Fix env location when booting from USB   Frieder Schrempf
    • [PATCH v2] arm: imx: imx9: soc: Fix env location when booting from USB   João Paulo Gonçalves
• [PATCH 0/6] Use correct LDO5 control registers for PCA9450   Frieder Schrempf
  • [PATCH 1/6] Revert "pmic: pca9450: Add optional SD_VSEL GPIO for LDO5"   Frieder Schrempf
  • [PATCH 2/6] pmic: pca9450: Fix enable register for LDO5   Frieder Schrempf
  • [PATCH 3/6] pmic: pca9450: Fix control register for LDO5   Frieder Schrempf
  • [PATCH 4/6] pmic: pca9450: Handle hardware with fixed SD_VSEL for LDO5   Frieder Schrempf
  • [PATCH 5/6] arm: dts: imx8mp-data-modul-edm-sbc: Remove deprecated sd-vsel-gpios   Frieder Schrempf
    • [PATCH 5/6] arm: dts: imx8mp-data-modul-edm-sbc: Remove deprecated sd-vsel-gpios   Marek Vasut
  • [PATCH 6/6] arm: dts: imx8mp-dhcom-som: Remove deprecated sd-vsel-gpios   Frieder Schrempf
    • [PATCH 6/6] arm: dts: imx8mp-dhcom-som: Remove deprecated sd-vsel-gpios   Marek Vasut
• Seeking advice on API return type inconsistency   Andrew Goodbody
  • Seeking advice on API return type inconsistency   Quentin Schulz
    • Seeking advice on API return type inconsistency   Andrew Goodbody
      • Seeking advice on API return type inconsistency   Tom Rini
      • Seeking advice on API return type inconsistency   Heinrich Schuchardt
      • Seeking advice on API return type inconsistency   Andrew Goodbody
      • Seeking advice on API return type inconsistency   Tom Rini
      • Seeking advice on API return type inconsistency   Andrew Goodbody
      • Seeking advice on API return type inconsistency   Michal Suchánek
      • Seeking advice on API return type inconsistency   Tom Rini
      • Seeking advice on API return type inconsistency   Andrew Goodbody
• [PATCH 2/3] sunxi: spl: initialise timer before clocks   Jernej Škrabec
  • [PATCH 2/3] sunxi: spl: initialise timer before clocks   Jernej Škrabec
  • [PATCH 2/3] sunxi: spl: initialise timer before clocks   Jernej Škrabec
• [PATCH 1/3] sunxi: a133: dram: fix data type for address variable   Jernej Škrabec
• [PATCH 3/3] sunxi: H616: dram: fix LPDDR3 mode register settings   Jernej Škrabec
  • [PATCH 3/3] sunxi: H616: dram: fix LPDDR3 mode register settings   Jernej Škrabec
• [PATCH 1/2] pinctrl: sunxi: a523: change Ethernet pin function name   Jernej Škrabec
• [PATCH 2/2] sunxi: a527: radxa/avaota: enable Ethernet   Jernej Škrabec
• [PATCH 0/2] sunxi: A64: enable AXP driver support   Jernej Škrabec
• [PATCH v1 0/2] sunxi: support signed images in SPL without SPL_DM   Lukas Schmid
  • [PATCH v1 1/2] rsa: allow operation without SPL_DM by falling back to software   Lukas Schmid
  • [PATCH v1 2/2] sunxi: u-boot.dtsi: add support for signed SPL and U-Boot images   Lukas Schmid
• [PATCH] serial: lpuart: Return value from correct variable   Andrew Goodbody
• [PATCH 0/2] serial: msm-geni: Fix Smatch reported issues   Andrew Goodbody
  • [PATCH 1/2] serial: msm-geni: Detect error from get_clk_div_rate   Andrew Goodbody
    • [PATCH 1/2] serial: msm-geni: Detect error from get_clk_div_rate   Casey Connolly
  • [PATCH 2/2] serial: msm-geni: No need to NULL check priv   Andrew Goodbody
    • [PATCH 2/2] serial: msm-geni: No need to NULL check priv   Casey Connolly
  • [PATCH 0/2] serial: msm-geni: Fix Smatch reported issues   Casey Connolly
• [PATCH] arm: socfpga: Correct how we set BOOTFILE   Tom Rini
  • [PATCH] arm: socfpga: Correct how we set BOOTFILE   Tom Rini
  • [PATCH] arm: socfpga: Correct how we set BOOTFILE   Tom Rini
• [ANN] U-Boot v2025.10-rc2 released   Tom Rini
  • [ANN] U-Boot v2025.10-rc2 released   Tom Rini
• [PATCH v5 00/10] arm64: stack backtraces   Tom Rini
• [PATCH 1/7] arch: arm: dts: k3-am625-phyboard-lyra: Disable unused watchdogs in U-Boot   Tom Rini
• [PATCH] pci: Add missing <linux/sizes.h> to pcie_iproc.c   Tom Rini
• [PATCH] pci: Tighten some PCI controller dependencies   Tom Rini
• [PATCH] nvme: Tighten requirements on NVME_APPLE driver   Tom Rini
• [PATCH] arm: bcm235xx: Remove this SoC   Tom Rini
• [PATCH] sandbox: Add more dummy functions to mimic other architectures   Tom Rini
• [PATCH v2] clk: cdce9xx: Fix use of dev_read_u32_default   Tom Rini
• [PATCH] gpio: dwapb_gpio: Using wrong function to free memory   Tom Rini
• [PATCH] arm: dts: mediatek: remove useless SPI property must_tx   Tom Rini
• [PATCH] pinctrl: gpio: sx150x: fix compilation warnings.   Tom Rini
• [PATCH] pinctrl: sx150x: reformat and fixup Copyright header   Tom Rini
• [PATCH] sunxi: Enable SPL/SPI boot for OLinuXino Lime2   Eric Anderson
• [PATCH] tools: fit_info: Make usage() static   Ilias Apalodimas
• [PATCH] tools: imx8image: Make imx8image_check_params() static   Ilias Apalodimas
  • [PATCH] tools: imx8image: Make imx8image_check_params() static   Peng Fan
• [PATCH] tools: aisimage: Make aisimage_check_params() static   Ilias Apalodimas
• [GIT PULL] u-boot-riscv/master   Leo Liang
  • [GIT PULL] u-boot-riscv/master   Tom Rini
    • [GIT PULL] u-boot-riscv/master   Leo Liang
      • [GIT PULL] u-boot-riscv/master   Martin Herren
      • [GIT PULL] u-boot-riscv/master   Leo Liang
• [PATCH 0/2] soc: ti: k3-navss-ringacc: Fix Smatch reported issues   Andrew Goodbody
  • [PATCH 1/2] soc: ti: k3-navss-ringacc: NULL check before dereference   Andrew Goodbody
  • [PATCH 2/2] soc: ti: k3-navss-ringacc: Do not use uninitialised variable   Andrew Goodbody
• [PATCH v1 1/5] binman: Fix FIT image overlap issues   Neha Malcom Francis
• [PATCH] sound: maxim_codec: Fix coding mistake   Andrew Goodbody
• [PATCH] sound: rt5677: Cannot test unsigned for being negative   Andrew Goodbody
• [PATCH v1 2/5] binman: Fix FIT image overlap issues for testFitSplitElf   Neha Malcom Francis
• [PATCH v1 3/5] arm: dts: k3-am6xx: Fix FIT image memory overlap in binman configurations   Neha Malcom Francis
• [PATCH 0/2] spi: cadence_qspi: Fix Smatch reported issues   Andrew Goodbody
  • [PATCH 1/2] spi: cadence_qspi: Off by 1 in test for timeout   Andrew Goodbody
  • [PATCH 2/2] spi: cadence_qspi: Do not return unset error code   Andrew Goodbody
• [PATCH] spi: exynos: Remove extra term from test   Andrew Goodbody
• [PATCH] mtd: rawnand: stm32_fmc2: set available OOB bytes per page   Christophe Kerello
  • [PATCH] mtd: rawnand: stm32_fmc2: set available OOB bytes per page   Patrice CHOTARD
• [PATCH] bootstd: rauc: Change global method to check any partition   Martin Schwan
  • [PATCH] bootstd: rauc: Change global method to check any partition   Wadim Egorov
  • [PATCH] bootstd: rauc: Change global method to check any partition   Tom Rini
• [PATCH v3 0/9] ram: k3-ddrss: Support partial inline ECC   Neha Malcom Francis
  • [PATCH v3 2/9] ram: k3-ddrss: s/K3_DDRSS_MAX_ECC_REGIONS/K3_DDRSS_MAX_ECC_REG   Neha Malcom Francis
  • [PATCH v3 3/9] ram: k3-ddrss: Add comment about ecc_reserved_space   Neha Malcom Francis
  • [PATCH v3 4/9] ram: k3-ddrss: Add support for a partial inline ECC region   Neha Malcom Francis
  • [PATCH v3 5/9] ram: k3-ddrss: Add CONFIG_K3_MULTI_DDR   Neha Malcom Francis
  • [PATCH v3 6/9] ram: k3-ddrss: Add support for number of controllers under MSMC   Neha Malcom Francis
  • [PATCH v3 7/9] ram: k3-ddrss: Add support for MSMC calculation of DDR inline ECC regions   Neha Malcom Francis
  • [PATCH v3 8/9] ram: k3-ddrss: Add support for partial inline ECC in multi-DDR systems   Neha Malcom Francis
  • [PATCH v3 9/9] ram: k3-ddrss: Support multiple ECC regions for a single controller   Neha Malcom Francis
• [PATCH v3 1/9] ram: k3-ddrss: Use DDR address instead of system address for ecc_regions   Neha Malcom Francis
• [PATCH v2 0/2] lwip: add Kconfig to decode and print ICMP unreachable messages   Jerome Forissier
  • [PATCH v2 1/2] lwip: icmp: allow reporting ICMP destination unreachable   Jerome Forissier
  • [PATCH v2 2/2] net: lwip: add Kconfig option to show ICMP unreachable errors   Jerome Forissier
• [PATCH RFC] rockchip: add /chosen/bootsource to U-Boot proper DT   Quentin Schulz
  • [PATCH RFC] rockchip: add /chosen/bootsource to U-Boot proper DT   Tom Rini
    • [PATCH RFC] rockchip: add /chosen/bootsource to U-Boot proper DT   Quentin Schulz
      • [PATCH RFC] rockchip: add /chosen/bootsource to U-Boot proper DT   Tom Rini
  • [PATCH RFC] rockchip: add /chosen/bootsource to U-Boot proper DT   Tom Rini
• [PATCH v3 03/22] ram: k3-ddrss: Add support for DDR in self-refresh   Markus Schneider-Pargmann
• [PATCH] spi: ich: Do not use uninitialised value   Andrew Goodbody
• [PATCH] mmc: stm32_sdmmc2: avoid infinite while loop   Christophe Kerello
  • [PATCH] mmc: stm32_sdmmc2: avoid infinite while loop   Patrice CHOTARD
• riscv: v2025.10-rc2 fails on QEMU with "Failed to reserve memory for fdt"   Vivian Wang
  • riscv: v2025.10-rc2 fails on QEMU with "Failed to reserve memory for fdt"   Sughosh Ganu
    • riscv: v2025.10-rc2 fails on QEMU with "Failed to reserve memory for fdt"   Vivian Wang
      • riscv: v2025.10-rc2 fails on QEMU with "Failed to reserve memory for fdt"   Sughosh Ganu
      • riscv: v2025.10-rc2 fails on QEMU with "Failed to reserve memory for fdt"   Auer, Lukas
• [PATCH] drivers: led: Add WS28XX compatible LED driver   Andri Yngvason
  • [PATCH] drivers: led: Add WS28XX compatible LED driver   Tom Rini
    • [PATCH] drivers: led: Add WS28XX compatible LED driver   Andri Yngvason
      • [PATCH] drivers: led: Add WS28XX compatible LED driver   Tom Rini
      • [PATCH] drivers: led: Add WS28XX compatible LED driver   Peter Robinson
• [PATCH] spi: npcm-fiu: Remove repeated test   Andrew Goodbody
• [PATCH 1/1] clk: introduce of_clk_detect_critical helper   Christian Marangi
  • [PATCH 1/1] clk: introduce of_clk_detect_critical helper   Maxim Kochetkov
  • [PATCH 1/1] clk: introduce of_clk_detect_critical helper   Maxim Kochetkov
    • [PATCH 1/1] clk: introduce of_clk_detect_critical helper   Quentin Schulz
• [PATCH] spi: fspi: Logical or used instead of logical and   Andrew Goodbody
• [PATCH] env: Correct Kconfig type for ENV_MMC_SW_PARTITION   Tom Rini
  • [PATCH] env: Correct Kconfig type for ENV_MMC_SW_PARTITION   Marek Vasut
  • [PATCH] env: Correct Kconfig type for ENV_MMC_SW_PARTITION   Tom Rini
• [PATCH 1/3] env: fat: Add support for NVME   Fabio Estevam
  • [PATCH 2/3] env: ext4: Add support for NVME   Fabio Estevam
  • [PATCH 3/3] env: fat: Standardize the interface type check   Fabio Estevam
• [PATCH] net: Add SYS_FAULT_MII_ADDR to Kconfig   Tom Rini
  • [PATCH] net: Add SYS_FAULT_MII_ADDR to Kconfig   Jerome Forissier
    • [PATCH] net: Add SYS_FAULT_MII_ADDR to Kconfig   Tom Rini
• [PATCH 1/2] sandbox: Improve dummy local_irq_save implementation   Tom Rini
  • [PATCH 2/2] sandbox: Add generic asm/atomic.h   Tom Rini
• [PATCH] efi_loader: Make EFI_VARIABLES_PRESEED depend on !COMPILE_TEST   Tom Rini
  • Re: [PATCH] efi_loader: Make EFI_VARIABLES_PRESEED depend on !COMPILE_TEST   Heinrich Schuchardt
  • [PATCH] efi_loader: Make EFI_VARIABLES_PRESEED depend on !COMPILE_TEST   Ilias Apalodimas
• [PATCH 1/1] serial-uclass: set GD_FLG_SERIAL_READY only when cur_serial_dev is assigned   Maxim Kochetkov
• [PATCH 1/1] common: spl: fix compilation warning   Leo Yu-Chi Liang
• [PATCH] arm: spi: atmel_qspi: fix race condition in transfer completion check   Eugen Hristev
• [PATCH] mfd: atmel-smc: Ensure match is initialised   Eugen Hristev
• [PATCH 0/2] PHYTEC imx8m boards: enable OP-TEE as default   Yannic Moog
  • [PATCH 2/2] doc: phytec: update imx8m docs for optee builds   Yannic Moog
• [PATCH 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Yannic Moog
• [PATCH 0/4] Switch to upstream devicetree for TH1520 platform   Yao Zi
  • [PATCH 1/4] configs: th1520_lpi4a: Enlarge SYS_MALLOC_F_LEN to 0x10000   Yao Zi
  • [PATCH 2/4] clk: thead: th1520-ap: Mark drivers as DM_FLAG_PRE_RELOC   Yao Zi
  • [PATCH 3/4] pinctrl: th1520: Mark driver as DM_FLAG_PRE_RELOC   Yao Zi
  • [PATCH 4/4] dts: th1520: Switch to upstream devicetree   Yao Zi
• [PATCH 0/2] Add compatibility for scmi clock protocol version 3.0   Kamlesh Gurudasani
  • [PATCH 1/2] clk: scmi: fix set_parent support when CCF is not being used   Kamlesh Gurudasani
    • [PATCH 1/2] clk: scmi: fix set_parent support when CCF is not being used   Peng Fan
      • [PATCH 1/2] clk: scmi: fix set_parent support when CCF is not being used   Kamlesh Gurudasani
  • [PATCH 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Kamlesh Gurudasani
    • [PATCH 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Peng Fan
• [RFC 0/1] mach-k3: Rework spl/get_boot_device()   Wadim Egorov
  • [RFC 1/1] arm: mach-k3: Rework spl/get_boot_device()   Wadim Egorov
• [PATCH] tpm: tis_infineon: Cannot test unsigned for being negative   Andrew Goodbody
  • [PATCH] tpm: tis_infineon: Cannot test unsigned for being negative   Ilias Apalodimas
• [PATCH 0/4] bootstd: rauc: Fix segfault when scanning device with unsupported layout   Martin Schwan
  • [PATCH 2/4] bootstd: rauc: Don't null bootflow->bootmeth_priv   Martin Schwan
  • [PATCH 3/4] bootstd: rauc: Move freeing private struct to its own function   Martin Schwan
  • [PATCH 4/4] bootstd: rauc: Free private data when booting   Martin Schwan
  • [PATCH 0/4] bootstd: rauc: Fix segfault when scanning device with unsupported layout   Wadim Egorov
• [PATCH 1/4] bootstd: rauc: Fix segfault when cleaning up slots   Martin Schwan
• [PATCH v4 0/6] A series of patch for enable sc7180 android boot   Casey Connolly
  • [PATCH v4 0/6] A series of patch for enable sc7180 android boot   george chan
• [PATCH v2] qcom_defconfig: Add VID/PID to represent fastboot device   Casey Connolly
  • [PATCH v2] qcom_defconfig: Add VID/PID to represent fastboot device   Sumit Garg
• [PATCH v2 0/5] power: rk8xx: allow to customize RK806 reset mode -- cover   Quentin Schulz
  • [PATCH v2 1/5] dt-bindings: mfd: rk806: Allow to customize PMIC reset mode   Quentin Schulz
  • [PATCH v2 2/5] arm64: dts: rockchip: add header for RK8XX PMIC constants   Quentin Schulz
  • [PATCH v2 3/5] arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Jaguar   Quentin Schulz
  • [PATCH v2 4/5] arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Tiger   Quentin Schulz
  • [PATCH v2 5/5] power: rk8xx: allow to customize RK806 reset mode   Quentin Schulz
• [PULL] Please pull qcom-fixes-13Aug2025   Casey Connolly
  • [PULL] Please pull qcom-fixes-13Aug2025   Tom Rini
• [PATCH] usb: cdns3: Do not access memory after free   Andrew Goodbody
  • [PATCH] usb: cdns3: Do not access memory after free   Marek Vasut
    • [PATCH] usb: cdns3: Do not access memory after free   Andrew Goodbody
• [GIT PULL] u-boot-sunxi/master for v2025.10   Tom Rini
• [PATCH 1/2] arm: v7m: Allow SYS_ARCH_TIMER here   Tom Rini
  • [PATCH 2/2] timer: Mark this as incompatible with SYS_ARCH_TIMER   Tom Rini
    • [PATCH 2/2] timer: Mark this as incompatible with SYS_ARCH_TIMER   Marius Dinu
      • [PATCH 2/2] timer: Mark this as incompatible with SYS_ARCH_TIMER   Tom Rini
      • [PATCH 2/2] timer: Mark this as incompatible with SYS_ARCH_TIMER   Marius Dinu
• [PATCH v4] arm64: dts: renesas: r8a779g3: Describe generic SPI NOR support on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
• [PATCH v2] arm64: dts: renesas: r8a779g3: Invert microSD voltage selector on Retronix R-Car V4H Sparrow Hawk EVTB1   Marek Vasut
• [PATCH v2] arm64: dts: renesas: r8a779g3: Set VDDQ18_25_AVB voltage on Retronix R-Car V4H Sparrow Hawk EVTB1   Marek Vasut
• [PATCH] board: phytec: common: k3: Making setup_mac_from_eeprom optional   John Ma
  • [PATCH] board: phytec: common: k3: Making setup_mac_from_eeprom optional   Wadim Egorov
• [PATCH v3] configs: Remove redundant CONFIG_TEXT_BASE assignments for Renesas defconfigs   Marek Vasut
• [PATCH] remoteproc: k3-r5: Add support for single cpu mode   Hari Nagalla
• [PATCH v2 0/3] socfpga: Agilex5: Fix dcache usage in SPL and SMC mailbox flow   Boon Khai Ng
  • [PATCH v2 1/3] arch: arm: mach-socfpga: smc: Add dcache flushing and invalidation in smc_send_mailbox()   Boon Khai Ng
  • [PATCH v2 2/3] cache: Check dcache availability before calling cache functions   Boon Khai Ng
    • [PATCH v2 2/3] cache: Check dcache availability before calling cache functions   Tom Rini
  • [PATCH v2 3/3] configs: agilex5: Enable config SPL_SYS_DCACHE_OFF   Boon Khai Ng
• [PATCH v2 1/2] bootstd: Add implementation for bootmeth rauc   Wadim Egorov
  • [PATCH v2 1/2] bootstd: Add implementation for bootmeth rauc   Wadim Egorov
    • [PATCH v2 1/2] bootstd: Add implementation for bootmeth rauc   Tom Rini
• CONFIG_SYS_EARLY_PCI_INIT for PCI-attached eMMC   Jan Kiszka
  • CONFIG_SYS_EARLY_PCI_INIT for PCI-attached eMMC   Fabio Estevam
    • CONFIG_SYS_EARLY_PCI_INIT for PCI-attached eMMC   Mark Kettenis
      • CONFIG_SYS_EARLY_PCI_INIT for PCI-attached eMMC   Fabio Estevam
      • CONFIG_SYS_EARLY_PCI_INIT for PCI-attached eMMC   Heinrich Schuchardt
      • CONFIG_SYS_EARLY_PCI_INIT for PCI-attached eMMC   Tom Rini
      • CONFIG_SYS_EARLY_PCI_INIT for PCI-attached eMMC   Jan Kiszka
• [PATCH] configs: stm32mp25: Enable OF_UPSTREAM_BUILD_VENDOR   Patrice Chotard
  • [PATCH] configs: stm32mp25: Enable OF_UPSTREAM_BUILD_VENDOR   Marek Vasut
    • [PATCH] configs: stm32mp25: Enable OF_UPSTREAM_BUILD_VENDOR   Patrice CHOTARD
• [PATCH v2 1/2] power: pmic: pca9450: Add support for system reset   Primoz Fiser
  • [PATCH v2 2/2] power: pmic: pca9450: Add support for reset status   Primoz Fiser
    • [PATCH v2 2/2] power: pmic: pca9450: Add support for reset status   Paul Geurts
    • [PATCH v2 2/2] power: pmic: pca9450: Add support for reset status   Paul Geurts
  • [PATCH v2 1/2] power: pmic: pca9450: Add support for system reset   Paul Geurts
  • [PATCH v2 1/2] power: pmic: pca9450: Add support for system reset   Paul Geurts
• [GIT PULL, v2] u-boot-riscv/master   Leo Liang
  • [GIT PULL, v2] u-boot-riscv/master   Tom Rini
  • [GIT PULL, v2] u-boot-riscv/master   Tom Rini
• [PATCH] mach-sc5xx: generate U-Boot proper in ADI ldr format   Philip Molloy
• [PATCH] bloblist: fix missing OR between licenses in the SPDX-License-Identifier   Max Merchel
• [PATCH] tools/libfdt/fdt_rw: sync SPDX-License-Identifier with libfdt   Max Merchel
  • [PATCH] tools/libfdt/fdt_rw: sync SPDX-License-Identifier with libfdt   Quentin Schulz
• [PATCH] net: add missing SPDX-License-Identifier for files originating from LiMon   Max Merchel
• [PATCH] mmc: sdhci-cadence6: fix SPDX-License-Identifier to GPL-2.0-or-later   Max Merchel
  • [PATCH] mmc: sdhci-cadence6: fix SPDX-License-Identifier to GPL-2.0-or-later   Peng Fan
• [PATCH v2 0/2] PHYTEC imx8m boards: enable OP-TEE as default   Yannic Moog
  • [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Yannic Moog
  • [PATCH v2 2/2] doc: phytec: update imx8m docs for optee builds   Yannic Moog
• [PATCH v2] configs: stm32mp25: Enable OF_UPSTREAM_BUILD_VENDOR   Patrice Chotard
  • [PATCH v2] configs: stm32mp25: Enable OF_UPSTREAM_BUILD_VENDOR   Marek Vasut
    • [PATCH v2] configs: stm32mp25: Enable OF_UPSTREAM_BUILD_VENDOR   Patrice CHOTARD
• [PATCH 0/5] Rockchip RK3368 drivers improve   WeiHao Li
  • [PATCH 1/5] clk: rockchip: rk3368: Add bus clk get/set   WeiHao Li
  • [PATCH 2/5] clk: rockchip: rk3368: add SCLK for mmc clock get/set   WeiHao Li
  • [PATCH 3/5] clk: rockchip: rk3368: Add VOP clock get/set   WeiHao Li
  • [PATCH 4/5] video: rockchip: Add bridge support for VOP   WeiHao Li
  • [PATCH 5/5] video: rockchip: add RK3368 VOP support   WeiHao Li
• [PATCH v2] mach-sc5xx: generate U-Boot proper in ADI ldr format   Philip Molloy
• [PATCH v2] Add imx8mp-libra-fpsc board   Benjamin Hahn
  • [PATCH v2] Add imx8mp-libra-fpsc board   Yannic Moog
• [PATCH v5 2/4] mach-k3: add runtime configuration of MMU table   Anshul Dalal
• [PATCH v5 3/4] mach-k3: add dynamic mmu fixups for SPL stage   Anshul Dalal
• [U-Boot, v5, 1/1] misc: fs_loader: Add request_firmware_into_buf_via_script() for flexible firmware loading via U-Boot script   Lucien.Jheng
  • [U-Boot, v5, 1/1] misc: fs_loader: Add request_firmware_into_buf_via_script() for flexible firmware loading via U-Boot script   Marek Vasut
    • [U-Boot, v5, 1/1] misc: fs_loader: Add request_firmware_into_buf_via_script() for flexible firmware loading via U-Boot script   Lucien.Jheng
• [PATCH v1] remoteproc: k3: update compatible for am654 syscon   Tom Rini
  • [PATCH v1] remoteproc: k3: update compatible for am654 syscon   Anshul Dalal
• [PATCH] imx: imx93_evk: Fix conflict SPL early malloc address   Jérémie Dautheribes
  • [PATCH] imx: imx93_evk: Fix conflict SPL early malloc address   Fabio Estevam
    • [PATCH] imx: imx93_evk: Fix conflict SPL early malloc address   Jérémie Dautheribes
      • [PATCH] imx: imx93_evk: Fix conflict SPL early malloc address   Fabio Estevam
• [PATCH 1/2] Kconfig: Convert SYS_EARLY_PCI_INIT to Kconfig   Fabio Estevam
  • [PATCH 2/2] qemu_arm: Select CONFIG_SYS_EARLY_PCI_INIT   Fabio Estevam
    • [PATCH 2/2] qemu_arm: Select CONFIG_SYS_EARLY_PCI_INIT   Tom Rini
      • [PATCH 2/2] qemu_arm: Select CONFIG_SYS_EARLY_PCI_INIT   Jan Kiszka
      • [PATCH 2/2] qemu_arm: Select CONFIG_SYS_EARLY_PCI_INIT   Tom Rini
  • [PATCH 1/2] Kconfig: Convert SYS_EARLY_PCI_INIT to Kconfig   Tom Rini
• [PATCH v2 0/4] cmd: nand: various updates   david regan
  • [PATCH v2 1/4] cmd: nand: bug fix MTD_OOB_AUTO to MTD_OPS_AUTO_OOB   david regan
  • [PATCH v2 2/4] cmd: nand: more descriptive help info   david regan
  • [PATCH v2 3/4] cmd: nand: nand dump display update   david regan
  • [PATCH v2 4/4] cmd: nand: nand dump with ecc option   david regan
• [PATCH v2 1/2] Kconfig: Convert SYS_EARLY_PCI_INIT to Kconfig   Fabio Estevam
  • [PATCH v2 2/2] qemu_arm: Select CONFIG_SYS_EARLY_PCI_INIT   Fabio Estevam
    • [PATCH v2 2/2] qemu_arm: Select CONFIG_SYS_EARLY_PCI_INIT   Tom Rini
    • [PATCH v2 2/2] qemu_arm: Select CONFIG_SYS_EARLY_PCI_INIT   Jan Kiszka
• [PATCH v3 0/6] Fix handling of optional blobs in binman   Tim Harvey
  • [PATCH v3 0/6] Fix handling of optional blobs in binman   Yannic Moog
    • [PATCH v3 0/6] Fix handling of optional blobs in binman   Yannic Moog
      • [PATCH v3 0/6] Fix handling of optional blobs in binman   Tim Harvey
• [PATCH v1] configs: agilex5: Increase watchdog timeout   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1] configs: agilex5: Increase watchdog timeout   Chee, Tien Fong
• [PATCH v1] riscv: dts: starfive: prune redundant jh7110-common overrides   E Shattow
  • [PATCH v1] riscv: dts: starfive: prune redundant jh7110-common overrides   Hal Feng
• [PATCH] i2c: omap24xx_i2c: remove unused members of struct omap_i2c   Rasmus Villemoes
• [PATCH] bootstd: rauc: Do not select BOOTMETH_GLOBAL   Martin Schwan
• [PATCH 0/4] Update SoM detection related code and configs   Wadim Egorov
  • [PATCH 2/4] board: phytec: common: k3: Use CONFIG_PHYTEC_EEPROM_BUS   Wadim Egorov
  • [PATCH 3/4] board: phytec: phycore-am62a: Update SoM detection Kconfig options   Wadim Egorov
  • [PATCH 4/4] configs: phycore_am62ax_a53_defconfig: Resync after savedefconfig   Wadim Egorov
• [PATCH 1/4] board: phytec: common: Add PHYTEC_EEPROM_BUS to Kconfig   Wadim Egorov
• [PATCH] video: mxsfb: fix pixel clock polarity   Sam Meredith
• [PATCH] arm: mach-k3: am625: Unlock MMR registers again   Daniel Schultz
• [PATCH] cmd: Remove default prompt from output   Daniel Schultz
  • [PATCH] cmd: Remove default prompt from output   Tom Rini
    • [PATCH] cmd: Remove default prompt from output   Quentin Schulz
• [PATCH v2] imx8: Add ahab_commit command for imx8   John Ripple
  • [PATCH v2] imx8: Add ahab_commit command for imx8   Peng Fan
    • [PATCH v2] imx8: Add ahab_commit command   John Ripple
• [PATCH v6 8/8] Drop the special am335x_boneblack_vboot target   Sascha Silbe
  • [PATCH] am335x_evm: re-enable legacy image format   Sascha Silbe
  • [PATCH v6 8/8] Drop the special am335x_boneblack_vboot target   Tom Rini
    • legacy image format on BBB / Debian (was: Re: [PATCH v6 8/8] Drop the special am335x_boneblack_vboot target)   Sascha Silbe
• [PATCH] ARM: dts: pxa1908: convert to OF_UPSTREAM   Duje Mihanović
  • [PATCH] ARM: dts: pxa1908: convert to OF_UPSTREAM   Tom Rini
• [PATCH] drivers: rtc: max313xx: Add delay after setting date   Ben Hoelker
  • [PATCH] drivers: rtc: max313xx: Add delay after setting date   Chris Packham
• [U-Boot, v6, 1/1] misc: fs_loader: Add request_firmware_into_buf_via_script() for flexible firmware loading via U-Boot script   Marek Vasut
  • [U-Boot, v6, 1/1] misc: fs_loader: Add request_firmware_into_buf_via_script() for flexible firmware loading via U-Boot script   Lucien.Jheng
  • [U-Boot, v6, 1/1] misc: fs_loader: Add request_firmware_into_buf_via_script() for flexible firmware loading via U-Boot script   Lucien.Jheng
• [PATCH] sandbox: fix linker error for SDL build   alison at she-devel.com
  • [PATCH] sandbox: fix linker error for SDL build   Tom Rini
• [PATCH v2] misc: fs_loader: Initialize actread variable   alif.zakuan.yuslaimi at altera.com
• [PATCH] usb: dwc3: Add versal2 compatibility string to dwc3 glue ids   Venkatesh Yadav Abbarapu
  • [PATCH] usb: dwc3: Add versal2 compatibility string to dwc3 glue ids   Marek Vasut
    • [PATCH] usb: dwc3: Add versal2 compatibility string to dwc3 glue ids   Abbarapu, Venkatesh
• [PATCH] configs: versal2: Add usb_pgood_delay for versal2 boards   Venkatesh Yadav Abbarapu
• [PATCH 1/1] arm: Fix swtiching typo   Heinrich Schuchardt
  • [PATCH 1/1] arm: Fix swtiching typo   Quentin Schulz
    • [PATCH 1/1] arm: Fix swtiching typo   Heinrich Schuchardt
• [PATCH] usb: dwc2: fix reset logic in dwc2_core_reset   Patrice CHOTARD
  • [PATCH] usb: dwc2: fix reset logic in dwc2_core_reset   Marek Vasut
• [PATCH v2] net: axi_emac: Fix timeout test   Andrew Goodbody
  • [PATCH v2] net: axi_emac: Fix timeout test   Anand Moon
    • [PATCH v2] net: axi_emac: Fix timeout test   Michal Simek
      • [PATCH v2] net: axi_emac: Fix timeout test   Anand Moon
• [PATCH v3 5/5] mtd: spinand: winbond: add Winbond W25N04KV flash support   Frieder Schrempf
  • [PATCH v3 5/5] mtd: spinand: winbond: add Winbond W25N04KV flash support   Frieder Schrempf
• [PATCH] board: phytec: phycore_am6xx: Add rauc to bootmeths   Wadim Egorov
  • [PATCH] board: phytec: phycore_am6xx: Add rauc to bootmeths   Martin Schwan
• [PATCH v2 0/2] phy: cadence: Fix two Smatch reported issues   Andrew Goodbody
  • [PATCH v2 1/2] phy: cadence: sierra: Remove variable that is not assigned to   Andrew Goodbody
  • [PATCH v2 2/2] phy: cadence: torrent: Set an error code for return   Andrew Goodbody
• [PATCH v2 0/2] Add compatibility for scmi clock protocol version 3.0   Kamlesh Gurudasani
  • [PATCH v2 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Kamlesh Gurudasani
• [PATCH v2 1/2] clk: scmi: fix set_parent support when CCF is not being used   Kamlesh Gurudasani
• Please pull net-20250818   Jerome Forissier
  • Please pull net-20250818   Tom Rini
• [PATCH] boot: Add LEGACY_IMAGE_FORMAT to DISTRO_DEFAULTS   Tom Rini
  • [PATCH] boot: Add LEGACY_IMAGE_FORMAT to DISTRO_DEFAULTS   Sascha Silbe
• [PATCH] test: Update logic for video test   Tom Rini
• [PATCH] mach-k3: am62*: Fix backup from eMMC boot mode   Judith Mendez
• [PATCH] misc: fs_loader: Add QSPI RAW partition loading support   Naresh Kumar Ravulapalli
• [PATCH] arm: dts: socfpga: Enable driver model for watchdog timer   Naresh Kumar Ravulapalli
• [PATCH] arch: arm: dts: stratix10: Add NAND IP to base dtsi   Naresh Kumar Ravulapalli
• [PATCH] mtd: spi: Add ISSI QSPI to lightweight SPI flash stack   Naresh Kumar Ravulapalli
• [PATCH] configs: socfpga: Add CRC32 support   Naresh Kumar Ravulapalli
• [PATCH] arch: arm: socfpga: Remove speed and mode from flash probe   Naresh Kumar Ravulapalli
• [PATCH] doc: misc: fs_loader: Add example serial flash config   Naresh Kumar Ravulapalli
• [PATCH] configs: socfpga: Remove SYS_BOOTM_LEN from N5X VAB config   Naresh Kumar Ravulapalli
• [PATCH] drivers: clk: agilex: Correct EMAC clock source selection   Naresh Kumar Ravulapalli
• [PATCH 0/4] Add SMMU support for SoCFPGA devices   Naresh Kumar Ravulapalli
  • [PATCH 1/4] arch: arm: socfpga: Add SMMU initialization and setup   Naresh Kumar Ravulapalli
  • [PATCH 2/4] arch: arm: socfpga: Add SMMU checking functions   Naresh Kumar Ravulapalli
  • [PATCH 3/4] drivers: fpga: Check bitstream address doesn't exceed 512MB   Naresh Kumar Ravulapalli
  • [PATCH 4/4] arch: arm: socfpga: Move SMMU init to before booting SSBL   Naresh Kumar Ravulapalli
• [PATCH] mtd: nand: cadence: Fix device assignment to avoid warm reset issue   Michael Nazzareno Trimarchi
  • [PATCH] mtd: nand: cadence: Fix device assignment to avoid warm reset issue   dinesh.maniyam at altera.com
  • [PATCH] mtd: nand: cadence: Fix device assignment to avoid warm reset issue   Maniyam, Dinesh
• [PATCH] board: phytec: phycore-imx93: Fix EEPROM bus mismatch in SPL   Primoz Fiser
  • [PATCH] board: phytec: phycore-imx93: Fix EEPROM bus mismatch in SPL   Wadim Egorov
    • [PATCH] board: phytec: phycore-imx93: Fix EEPROM bus mismatch in SPL   Primoz Fiser
• [PATCH v3 0/2] Add compatibility for scmi clock protocol version 3.0   Kamlesh Gurudasani
• [PATCH v3 1/2] clk: scmi: fix set_parent support when CCF is not being used   Kamlesh Gurudasani
• [PATCH v3 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Kamlesh Gurudasani
• [PATCH v3 12/12] timer: p8700: Add support for reading time from memory-mapped mtime   Uros Stajic
• [PATCH v2] mtd: nand: cadence: Fix device assignment to avoid warm reset issue   Michael Nazzareno Trimarchi
  • [PATCH v2] mtd: nand: cadence: Fix device assignment to avoid warm reset issue   dinesh.maniyam at altera.com
  • [PATCH v2] mtd: nand: cadence: Fix device assignment to avoid warm reset issue   Michael Nazzareno Trimarchi
    • [PATCH v2] mtd: nand: cadence: Fix device assignment to avoid warm reset issue   Maniyam, Dinesh
• [PATCH v3] mtd: nand: cadence: Fix device assignment to avoid warm reset issue   dinesh.maniyam at altera.com
• [PATCH] ufs: amd-versal2: Configure RMMI and M-PHY registers for HS mode   Michal Simek
• [PATCH] arm64: versal2: Define BOOTENV_DEV_SHARED_XSPI when distro is disabled   Michal Simek
• [PATCH] arm64: zynqmp: Add missing ethernet alias for kr260-revB   Michal Simek
• [PATCH v2 0/3] fpga: Remove lattice and ACEX1 support   Michal Simek
• [PATCH v2] CI: Wire mbv32 combinations   Michal Simek
• [PATCH 1/3] clk: zynqmp: Mark zynqmp_clk_ops as const   Michal Simek
• [PATCH V5 0/4] cmd: env: select: Add output for available environment targets   Christoph Niedermaier

Last message date: Tue Aug 19 11:36:37 CEST 2025
Archived on: Tue Aug 19 11:52:24 CEST 2025

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...