February 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Feb 1 07:22:10 CET 2025
Ending: Fri Feb 28 23:11:01 CET 2025
Messages: 3000

• [PATCH v2 0/4] net: use strnstr() for lwip_strnstr()   Heinrich Schuchardt
  • [PATCH v2 1/4] net: lwip: tftp: fix find_option()   Heinrich Schuchardt
    • [PATCH v2 1/4] net: lwip: tftp: fix find_option()   Jerome Forissier
  • [PATCH v2 2/4] lib: implement strnstr()   Heinrich Schuchardt
  • [PATCH v2 3/4] test: unit tests for strstr() and strnstr()   Heinrich Schuchardt
  • [PATCH v2 4/4] net: use strnstr() for lwip_strnstr()   Heinrich Schuchardt
• [PATCH v2 0/2] FIX: Re-enable MUX_MMIO on J721E/J7200   Siddharth Vadapalli
  • [PATCH v2 1/2] configs: j721e_evm_a72_defconfig: Re-enable MUX_MMIO at U-Boot proper   Siddharth Vadapalli
  • [PATCH v2 2/2] configs: j7200_evm_a72_defconfig: Re-enable MUX_MMIO at U-Boot proper   Siddharth Vadapalli
    • [PATCH v2 2/2] configs: j7200_evm_a72_defconfig: Re-enable MUX_MMIO at U-Boot proper   Dutta, Anurag
  • [PATCH v2 0/2] FIX: Re-enable MUX_MMIO on J721E/J7200   Tom Rini
• [PATCH v2] zynqmp: Dynamic setting mmcdev and mmcroot   egyszeregy at freemail.hu
  • [PATCH v2] zynqmp: Dynamic setting mmcdev and mmcroot   Michal Simek
    • [PATCH v2] zynqmp: Dynamic setting mmcdev and mmcroot   Szőke Benjamin
      • [PATCH v2] zynqmp: Dynamic setting mmcdev and mmcroot   Michal Simek
• [PATCH v2 1/1] cmd/setexpr: support concatenation of direct strings   Heinrich Schuchardt
  • [PATCH v2 1/1] cmd/setexpr: support concatenation of direct strings   Tom Rini
    • [PATCH v2 1/1] cmd/setexpr: support concatenation of direct strings   Heinrich Schuchardt
• [PATCH] tools: imx8image: Fix potential memory leak   Maks Mishin
• [PATCH] tools: ublimage: Fix memory leak in parse_cfg_file()   Maks Mishin
  • [PATCH] tools: ublimage: Fix memory leak in parse_cfg_file()   Tom Rini
• [PATCH] tools: imx8mimage: Fix potential memory leak   Maks Mishin
  • [PATCH] tools: imx8mimage: Fix potential memory leak   Fabio Estevam
• [PATCH] efi_loader: Fix potential deref-after-null   Maks Mishin
  • [PATCH] efi_loader: Fix potential deref-after-null   Heinrich Schuchardt
• [PATCH] net: lwip: move eth_init() out of new_netif()   E Shattow
• [PATCH 1/1] riscv: AVAILABLE_HARTS is not compatible with XIP   Leo Liang
• [PATCH v2 1/1] cmd: sbi: add bhyve SBI implementation ID   Leo Liang
• [PATCH v4 0/5] rpi: Tidy up booting   Peter Robinson
• [RFC PATCH 1/3] riscv: add a generic implementation for cleanup_before_linux()   Leo Liang
• [RFC PATCH 2/3] riscv: cpu: generic: fallback to generic cleanup_before_linux()   Leo Liang
• [RFC PATCH 3/3] riscv: cpu: jh7110: fallback to generic cleanup_before_linux()   Leo Liang
• [RFC PATCH 1/2] riscv: Add CONFIG_SPL_OPTEE_LOAD_ADDR   Leo Liang
• [RFC PATCH 2/2] riscv: dts: binman.dtsi: Include OP-TEE OS image   Leo Liang
• [PATCH 0/2] Add support for Infineon S28HL256T and S28HL02GT   tkuw584924 at gmail.com
  • [PATCH 1/2] mtd: spi-nor-ids: Add support for S28HL256T   tkuw584924 at gmail.com
    • [PATCH 1/2] mtd: spi-nor-ids: Add support for S28HL256T   Tudor Ambarus
  • [PATCH 2/2] mtd: spi-nor-ids: Add support for S28HL02GT   tkuw584924 at gmail.com
    • [PATCH 2/2] mtd: spi-nor-ids: Add support for S28HL02GT   Tudor Ambarus
• [PATCH 1/4] test/py: Shorten u_boot_console   Love Kumar
  • [PATCH 1/4] test/py: Shorten u_boot_console   Simon Glass
• dtc: "syntax error" linked to &{label/subnode} syntax   Patrice CHOTARD
  • dtc: "syntax error" linked to &{label/subnode} syntax   Patrice CHOTARD
• [GIT PULL] u-boot-riscv/master   Leo Liang
  • [GIT PULL] u-boot-riscv/master   Tom Rini
  • [GIT PULL] u-boot-riscv/master   Leo Liang
    • [GIT PULL] u-boot-riscv/master   Tom Rini
• [PATCH] configs: versal: update initial stack pointer   Padmarao Begari
  • [PATCH] configs: versal: update initial stack pointer   Michal Simek
• [PATCH] xilinx: Remove SYS_MALLOC_F_LEN setup via board Kconfig   Michal Simek
• [PATCH] arm64: zynqmp: enable u-boot itb generation via binman if SPL is enabled   Michal Simek
• [PATCH] arm64: zynqmp: Describe ethernet controllers via aliases on SOM   Michal Simek
• [PATCH v3 0/4] net: use strnstr() for lwip_strnstr()   Heinrich Schuchardt
  • [PATCH v3 1/4] net: lwip: tftp: fix find_option()   Heinrich Schuchardt
  • [PATCH v3 2/4] lib: implement strnstr()   Heinrich Schuchardt
    • [PATCH v3 2/4] lib: implement strnstr()   Ilias Apalodimas
  • [PATCH v3 3/4] test: unit tests for strstr() and strnstr()   Heinrich Schuchardt
    • [PATCH v3 3/4] test: unit tests for strstr() and strnstr()   Ilias Apalodimas
  • [PATCH v3 4/4] net: use strnstr() for lwip_strnstr()   Heinrich Schuchardt
    • [PATCH v3 4/4] net: use strnstr() for lwip_strnstr()   Ilias Apalodimas
• [PATCH v2 2/7] ARM: dts: at91: sam9x60: Define pinctrl node with its label   Manikandan.M at microchip.com
• [PATCH] rtc: emul_rtc: Make emul_rtc_probe() static   Michal Simek
  • [PATCH] rtc: emul_rtc: Make emul_rtc_probe() static   Tom Rini
• [PATCH] fpga: Avoid ignored-qualifiers warning   Michal Simek
• [PATCH] fpga: Make do_fpga_loads() static   Michal Simek
  • [PATCH] fpga: Make do_fpga_loads() static   Alexander Dahl
  • [PATCH] fpga: Make do_fpga_loads() static   Michal Simek
• [U-Boot][PATCH v5 0/5] Improve fpga cmd usage information   Michal Simek
• [PATCH] xilinx: Enable mkfwumdata tool for a/b update   Michal Simek
• [PATCH v2] xilinx: Enable meminfo command with mapping   Michal Simek
• [PATCH] xilinx: Enable MBEDTLS/LWIP/WGET and WGET_HTTPS   Michal Simek
  • [PATCH] xilinx: Enable MBEDTLS/LWIP/WGET and WGET_HTTPS   Michal Simek
• [PATCH 2/3] board: phytec: phycore_am64x: Add support for 1 GB RAM variant and ECC   Daniel Schultz
• [PATCH 3/3] configs: phycore_am64x_r5_defconfig: Enable PHYTEC_SOM_DETECTION   Daniel Schultz
  • [PATCH 3/3] configs: phycore_am64x_r5_defconfig: Enable PHYTEC_SOM_DETECTION   Tom Rini
• [PATCH 1/3] arch: arm: dts: phyboard-electra-uboot.dtsi: Add bootph props to i2c   Daniel Schultz
• [PATCH v2 0/4] FAT file renaming   Daniel Venzin
  • [PATCH v2 1/4] fs: Add unimplemented rename hook to FS layer   Daniel Venzin
  • [PATCH v2 2/4] efi_loader: Support for file renaming   Daniel Venzin
  • [PATCH v2 3/4] fs: fat: Refactor delete_dentry_long interface   Daniel Venzin
  • [PATCH v2 4/4] fs: fat: Support basic file rename   Daniel Venzin
  • [PATCH v2 0/4] FAT file renaming   Tom Rini
• [PATCH v4 0/5] Add pmem node for preserving distro ISO's   Sughosh Ganu
  • [PATCH v4 1/5] fdt: add support for adding pmem nodes   Sughosh Ganu
    • [PATCH v4 1/5] fdt: add support for adding pmem nodes   Ilias Apalodimas
  • [PATCH v4 2/5] efi_loader: add a function to remove memory from the EFI map   Sughosh Ganu
  • [PATCH v4 3/5] efi_loader: preserve installer images in pmem   Sughosh Ganu
  • [PATCH v4 4/5] blkmap: store type of blkmap slice in corresponding structure   Sughosh Ganu
    • [PATCH v4 4/5] blkmap: store type of blkmap slice in corresponding structure   Ilias Apalodimas
  • [PATCH v4 5/5] blkmap: add pmem nodes for blkmap memory mapped slices   Sughosh Ganu
    • [PATCH v4 5/5] blkmap: add pmem nodes for blkmap memory mapped slices   Ilias Apalodimas
      • Re: [PATCH v4 5/5] blkmap: add pmem nodes for blkmap memory mapped slices   Heinrich Schuchardt
      • [PATCH v4 5/5] blkmap: add pmem nodes for blkmap memory mapped slices   Ilias Apalodimas
      • [PATCH v4 5/5] blkmap: add pmem nodes for blkmap memory mapped slices   Tobias Waldekranz
• [PATCH 6/7] spi: atmel-quadspi: Add support for classic SPI mode   Alexander Dahl
• [RFC PATCH v2 1/3] Introduce coroutines framework   Ahmad Fatoum
• u-boot in restricted environment: networking over serial   Ahmad Fatoum
  • u-boot in restricted environment: networking over serial   Ferenc Fejes
    • u-boot in restricted environment: networking over serial   Ahmad Fatoum
• [PATCH v2 3/4] bloblist: add support for CONFIG_BLOBLIST_PASSAGE   Harrison Mutai
  • [PATCH v2 3/4] bloblist: add support for CONFIG_BLOBLIST_PASSAGE   Tom Rini
    • [PATCH v2 3/4] bloblist: add support for CONFIG_BLOBLIST_PASSAGE   Harrison Mutai
• [PATCH RFC 00/14] efi: implement EFISTUB support for ARM64 and Qualcomm   Simon Glass
  • [PATCH RFC 00/14] efi: implement EFISTUB support for ARM64 and Qualcomm   Simon Glass
• [PATCH] imx6q-lxr: Convert to OF_UPSTREAM   Fabio Estevam
  • [PATCH] imx6q-lxr: Convert to OF_UPSTREAM   Fabio Estevam
• [PATCH] env: fat: Avoid writing to read-only location   Ilias Apalodimas
  • [PATCH] env: fat: Avoid writing to read-only location   Tom Rini
• [PATCH] net: Kconfig: Select DM_RNG for LWIP   Michal Simek
  • [PATCH] net: Kconfig: Select DM_RNG for LWIP   Ilias Apalodimas
    • [PATCH] net: Kconfig: Select DM_RNG for LWIP   Michal Simek
      • [PATCH] net: Kconfig: Select DM_RNG for LWIP   Ilias Apalodimas
  • [PATCH] net: Kconfig: Select DM_RNG for LWIP   Jerome Forissier
  • [PATCH] net: Kconfig: Select DM_RNG for LWIP   Michal Simek
    • [PATCH] net: Kconfig: Select DM_RNG for LWIP   Jerome Forissier
• [PATCH v3 0/4] cmd/setexpr: support concatenation of direct strings   Heinrich Schuchardt
  • [PATCH v3 1/4] test: clean up setexpr_test_str()   Heinrich Schuchardt
  • [PATCH v3 2/4] test: remove available memory check in setexpr_test_str()   Heinrich Schuchardt
  • [PATCH v3 3/4] test: remove available memory check in setexpr_test_str_oper()   Heinrich Schuchardt
  • [PATCH v3 4/4] cmd/setexpr: support concatenation of direct strings   Heinrich Schuchardt
  • [PATCH v3 0/4] cmd/setexpr: support concatenation of direct strings   Tom Rini
• [PATCH RESEND] drivers: usb: gadget: composite: add checking for interface number   Vladimir Mitrofanov
• [PATCH] Add Kconfig option for altbootcmd when using CONFIG_BOOTCOUNT_LIMIT   Tomáš Peterka
  • [PATCH] Add Kconfig option for altbootcmd when using CONFIG_BOOTCOUNT_LIMIT   Tom Rini
• [PATCH] tools: image-host: Fix potential memory leaks   Maks Mishin
  • [PATCH] tools: image-host: Fix potential memory leaks   Tom Rini
• [PATCH] CI: Use different containers for concurrent runner   Simon Glass
  • [PATCH] CI: Use different containers for concurrent runner   Tom Rini
    • [PATCH] CI: Use different containers for concurrent runner   Simon Glass
• [PATCH 0/4] tools: Minor clean-ups for the command library   Simon Glass
  • [PATCH 1/4] u_boot_pylib: Correct case for test_result   Simon Glass
  • [PATCH 2/4] u_boot_pylib: Add an exception-class for errors   Simon Glass
  • [PATCH 3/4] u_boot_pylib: Fix pylint warnings in command   Simon Glass
  • [PATCH 4/4] u_boot_pylib: Add a function to run a single command   Simon Glass
• [PATCH] zynqmp: Save "bootseq" environment variable in dec format   egyszeregy at freemail.hu
  • [PATCH] zynqmp: Save "bootseq" environment variable in dec format   Simon Glass
    • [PATCH] zynqmp: Save "bootseq" environment variable in dec format   Szőke Benjamin
      • [PATCH] zynqmp: Save "bootseq" environment variable in dec format   Michal Simek
• [PATCH] cmd: ufetch: use 3-bit colour ANSI codes   Sam Day
  • [PATCH] cmd: ufetch: use 3-bit colour ANSI codes   Ferass El Hafidi
  • [PATCH] cmd: ufetch: use 3-bit colour ANSI codes   Alexey Minnekhanov
  • [PATCH] cmd: ufetch: use 3-bit colour ANSI codes   Caleb Connolly
• [PATCH] scripts: Fix potential null-deref   Maks Mishin
  • [PATCH] scripts: Fix potential null-deref   Tom Rini
• [PATCH 00/32] arm: Support building as an EFI app   Simon Glass
  • [PATCH 00/32] arm: Support building as an EFI app   Heinrich Schuchardt
    • [PATCH 00/32] arm: Support building as an EFI app   Simon Glass
• [PATCH 01/32] Convert build-efi script to Python   Simon Glass
  • [PATCH 01/32] Convert build-efi script to Python   Tom Rini
    • [PATCH 01/32] Convert build-efi script to Python   Simon Glass
      • [PATCH 01/32] Convert build-efi script to Python   Tom Rini
      • [PATCH 01/32] Convert build-efi script to Python   Simon Glass
      • [PATCH 01/32] Convert build-efi script to Python   Tom Rini
  • [PATCH 01/32] Convert build-efi script to Python   Heinrich Schuchardt
    • [PATCH 01/32] Convert build-efi script to Python   Simon Glass
• [PATCH 02/32] Makefile: Avoid using TEXT_BASE if not present   Simon Glass
  • [PATCH 02/32] Makefile: Avoid using TEXT_BASE if not present   Tom Rini
• [PATCH 03/32] video: Move vesa_setup_video_priv() into its own file   Simon Glass
  • [PATCH 03/32] video: Move vesa_setup_video_priv() into its own file   Tom Rini
• [PATCH 04/32] video: Use a local mode_info struct in the EFI driver   Simon Glass
• [PATCH 05/32] lib: Provide fdtdec_get_pci_bar32() only with PCI enabled   Simon Glass
  • [PATCH 05/32] lib: Provide fdtdec_get_pci_bar32() only with PCI enabled   Tom Rini
  • [PATCH 05/32] lib: Provide fdtdec_get_pci_bar32() only with PCI enabled   Matthias Brugger
• [PATCH 06/32] scripts: Update build-efi to support building U-Boot   Simon Glass
• [PATCH 07/32] scripts: Update build-efi to support arm64   Simon Glass
  • [PATCH 07/32] scripts: Update build-efi to support arm64   Heinrich Schuchardt
    • [PATCH 07/32] scripts: Update build-efi to support arm64   Simon Glass
      • [PATCH 07/32] scripts: Update build-efi to support arm64   Tom Rini
      • [PATCH 07/32] scripts: Update build-efi to support arm64   Simon Glass
• [PATCH 08/32] efi: Rename app and payload to include x86   Simon Glass
  • [PATCH 08/32] efi: Rename app and payload to include x86   Tom Rini
• [PATCH 09/32] efi: Allow board/efi Kconfig to be used outside x86   Simon Glass
  • [PATCH 09/32] efi: Allow board/efi Kconfig to be used outside x86   Tom Rini
• [PATCH 10/32] efi: x86: Move EFI SDRAM-handling into a common file   Simon Glass
  • [PATCH 10/32] efi: x86: Move EFI SDRAM-handling into a common file   Tom Rini
• [PATCH 11/32] efi: x86: Rework VENDOR_EFI option to permit other archs   Simon Glass
  • [PATCH 11/32] efi: x86: Rework VENDOR_EFI option to permit other archs   Tom Rini
    • [PATCH 11/32] efi: x86: Rework VENDOR_EFI option to permit other archs   Simon Glass
      • [PATCH 11/32] efi: x86: Rework VENDOR_EFI option to permit other archs   Tom Rini
• [PATCH 12/32] efi: x86: Allow setting the global_data pointer with EFI   Simon Glass
• [PATCH 13/32] efi: Tidy up setup of global_data   Simon Glass
• [PATCH 14/32] efi: Rename ImageBase to image_base   Simon Glass
  • [PATCH 14/32] efi: Rename ImageBase to image_base   Tom Rini
    • [PATCH 14/32] efi: Rename ImageBase to image_base   Simon Glass
      • [PATCH 14/32] efi: Rename ImageBase to image_base   Tom Rini
      • [PATCH 14/32] efi: Rename ImageBase to image_base   Simon Glass
      • [PATCH 14/32] efi: Rename ImageBase to image_base   Tom Rini
• [PATCH 15/32] efi: lmb: Avoid access to _start   Simon Glass
  • [PATCH 15/32] efi: lmb: Avoid access to _start   Tom Rini
    • [PATCH 15/32] efi: lmb: Avoid access to _start   Simon Glass
      • [PATCH 15/32] efi: lmb: Avoid access to _start   Tom Rini
      • [PATCH 15/32] efi: lmb: Avoid access to _start   Simon Glass
      • [PATCH 15/32] efi: lmb: Avoid access to _start   Tom Rini
• [PATCH 16/32] efi: arm: Don't do the EL2 switch when running under EFI   Simon Glass
  • [PATCH 16/32] efi: arm: Don't do the EL2 switch when running under EFI   Tom Rini
    • [PATCH 16/32] efi: arm: Don't do the EL2 switch when running under EFI   Simon Glass
• [PATCH 17/32] efi: arm: Avoid allocating page tables when running under EFI   Simon Glass
• [PATCH 18/32] efi: arm: Avoid enabling caches when running under EFI   Simon Glass
• [PATCH 19/32] efi: arm: Implement access to global_data for EFI   Simon Glass
• [PATCH 20/32] efi: arm: Omit the ARM start-up code in the EFI app   Simon Glass
  • [PATCH 20/32] efi: arm: Omit the ARM start-up code in the EFI app   Tom Rini
• [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Simon Glass
  • [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Tom Rini
    • [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Simon Glass
      • [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Tom Rini
      • [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Simon Glass
      • [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Tom Rini
      • [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Simon Glass
      • [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Tom Rini
      • [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Simon Glass
      • [PATCH 21/32] efi: arm: Drop exception code when running as an EFI app   Tom Rini
• [PATCH 22/32] efi: arm: Allow use of the EFI table in the app   Simon Glass
  • [PATCH 22/32] efi: arm: Allow use of the EFI table in the app   Heinrich Schuchardt
    • [PATCH 22/32] efi: arm: Allow use of the EFI table in the app   Simon Glass
      • [PATCH 22/32] efi: arm: Allow use of the EFI table in the app   Heinrich Schuchardt
      • [PATCH 22/32] efi: arm: Allow use of the EFI table in the app   Simon Glass
• [PATCH 23/32] efi: arm: Disable --gc-sections for the app   Simon Glass
  • [PATCH 23/32] efi: arm: Disable --gc-sections for the app   Tom Rini
• [PATCH 24/32] efi: arm: Drop startup code from the app   Simon Glass
  • [PATCH 24/32] efi: arm: Drop startup code from the app   Tom Rini
• [PATCH 25/32] efi: arm: Adjust how the monitor length is calculated   Simon Glass
  • [PATCH 25/32] efi: arm: Adjust how the monitor length is calculated   Tom Rini
• [PATCH 26/32] efi: arm: Select the EFI linker script for the app   Simon Glass
  • [PATCH 26/32] efi: arm: Select the EFI linker script for the app   Tom Rini
• [PATCH 27/32] efi: arm: Provide startup and relocation code   Simon Glass
  • [PATCH 27/32] efi: arm: Provide startup and relocation code   Tom Rini
• [PATCH 28/32] efi: Generate the app as a shared library   Simon Glass
  • [PATCH 28/32] efi: Generate the app as a shared library   Tom Rini
• [PATCH 29/32] efi: arm: Disable STATIC_RELA for the EFI app   Simon Glass
• [PATCH 30/32] efi: arm: Use EFI flags for all compilation with the app   Simon Glass
  • [PATCH 30/32] efi: arm: Use EFI flags for all compilation with the app   Tom Rini
• [PATCH 31/32] efi: arm: Simplify the crt0 file and update link script   Simon Glass
  • [PATCH 31/32] efi: arm: Simplify the crt0 file and update link script   Tom Rini
    • [PATCH 31/32] efi: arm: Simplify the crt0 file and update link script   Simon Glass
      • [PATCH 31/32] efi: arm: Simplify the crt0 file and update link script   Tom Rini
      • [PATCH 31/32] efi: arm: Simplify the crt0 file and update link script   Simon Glass
      • [PATCH 31/32] efi: arm: Simplify the crt0 file and update link script   Tom Rini
      • [PATCH 31/32] efi: arm: Simplify the crt0 file and update link script   Simon Glass
      • [PATCH 31/32] efi: arm: Simplify the crt0 file and update link script   Tom Rini
• [PATCH 32/32] efi: arm: Add an EFI app for arm64   Simon Glass
  • [PATCH 32/32] efi: arm: Add an EFI app for arm64   Tom Rini
• [PATCH RFC v2 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Andrew Davis
  • [PATCH RFC v2 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Tom Rini
  • [PATCH RFC v2 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Manorit Chawdhry
    • [PATCH RFC v2 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Andrew Davis
      • [PATCH RFC v2 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Manorit Chawdhry
      • [PATCH RFC v2 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Andrew Davis
      • [PATCH RFC v2 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Manorit Chawdhry
      • [PATCH RFC v2 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Andrew Davis
• [PATCH] dfu: Prevent set_dfu_alt_info() from overwriting a previous value   Jon Humphreys
  • [PATCH] dfu: Prevent set_dfu_alt_info() from overwriting a previous value   Ilias Apalodimas
  • [PATCH] dfu: Prevent set_dfu_alt_info() from overwriting a previous value   Mattijs Korpershoek
• [PATCH 0/2] EFI Capsule update explicitly sets dfu_alt_info   Jonathan Humphreys
• [PATCH 1/2] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Jonathan Humphreys
  • [PATCH 1/2] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Mattijs Korpershoek
  • [PATCH 1/2] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Ilias Apalodimas
• [PATCH 2/2] board: remove capsule update support in set_dfu_alt_info()   Jonathan Humphreys
  • [PATCH 2/2] board: remove capsule update support in set_dfu_alt_info()   Mattijs Korpershoek
• [PATCH v2 1/3] mbedtls: fix incorrect kconfig dependencies on mbedtls   Raymond Mao
  • [PATCH v2 2/3] mbedtls: access mbedtls private members in mscode and pkcs7 parser   Raymond Mao
  • [PATCH v2 3/3] mbedtls: refactor mbedtls build for XPL   Raymond Mao
    • [PATCH v2 3/3] mbedtls: refactor mbedtls build for XPL   Ilias Apalodimas
  • [PATCH v2 1/3] mbedtls: fix incorrect kconfig dependencies on mbedtls   Ilias Apalodimas
    • [PATCH v2 1/3] mbedtls: fix incorrect kconfig dependencies on mbedtls   Raymond Mao
      • [PATCH v2 1/3] mbedtls: fix incorrect kconfig dependencies on mbedtls   Tom Rini
      • [PATCH v2 1/3] mbedtls: fix incorrect kconfig dependencies on mbedtls   Raymond Mao
  • [PATCH v2 1/3] mbedtls: fix incorrect kconfig dependencies on mbedtls   Tom Rini
• [PATCH 00/19] vbe: Series part G   Tom Rini
• [PATCH 0/2] rockchip: Add minimal generic RK3328 and RK3399 boards   Jonas Karlman
  • [PATCH 1/2] board: rockchip: Add minimal generic RK3328 board   Jonas Karlman
  • [PATCH 2/2] board: rockchip: Add minimal generic RK3399 board   Jonas Karlman
• [PATCH v2 0/3] arm64: zynqmp: Update binman configurations   Michal Simek
  • [PATCH v2 1/3] arm64: zynqmp: Fix TEE loading address and add hash   Michal Simek
  • [PATCH v2 2/3] arm64: zynqmp: Use DTB address base from .config   Michal Simek
  • [PATCH v2 3/3] arm64: zynqmp: Describe images without TF-A   Michal Simek
• [PATCH 03/21] efi_loader: efi_setup: Add efi_start_obj_list() to efi_setup.c   Ilias Apalodimas
• [PATCH 04/21] efi_loader: efi_net: Add efi_net_do_start() to efi_net.c   Ilias Apalodimas
• [PATCH 05/21] efi_loader: efi_device_path: Let network device paths receive the net udevice as an argument   Ilias Apalodimas
• [PATCH 02/21] efi_loader: expose symbols to be used by the EFI network stack   Ilias Apalodimas
• [PATCH 00/21] EFI driver to support multiple network interfaces   Ilias Apalodimas
  • [PATCH 00/21] EFI driver to support multiple network interfaces   Adriano Córdova
    • [PATCH 00/21] EFI driver to support multiple network interfaces   Ilias Apalodimas
• [RFC PATCH 0/4] Fix page permission on arm64 architectures   Love Kumar
  • [RFC PATCH 0/4] Fix page permission on arm64 architectures   Ilias Apalodimas
    • [RFC PATCH 0/4] Fix page permission on arm64 architectures   Love Kumar
  • [RFC PATCH 0/4] Fix page permission on arm64 architectures   Simon Glass
    • [RFC PATCH 0/4] Fix page permission on arm64 architectures   Ilias Apalodimas
      • [RFC PATCH 0/4] Fix page permission on arm64 architectures   Simon Glass
      • [RFC PATCH 0/4] Fix page permission on arm64 architectures   Ilias Apalodimas
• [PATCH v2 0/3] Add support for K3 BIST   Neha Malcom Francis
  • [PATCH v2 2/3] DONOTMERGE: arm: dts: k3-j784s4-main: Add PBIST_14 node   Neha Malcom Francis
    • [PATCH v2 2/3] DONOTMERGE: arm: dts: k3-j784s4-main: Add PBIST_14 node   Kumar, Udit
  • [PATCH v2 3/3] arm: mach-k3: j784s4_init: Trigger LBIST and PBIST on MAIN R5 2_0   Neha Malcom Francis
    • [PATCH v2 3/3] arm: mach-k3: j784s4_init: Trigger LBIST and PBIST on MAIN R5 2_0   Kumar, Udit
    • [PATCH v2 3/3] arm: mach-k3: j784s4_init: Trigger LBIST and PBIST on MAIN R5 2_0   Manorit Chawdhry
      • [PATCH v2 3/3] arm: mach-k3: j784s4_init: Trigger LBIST and PBIST on MAIN R5 2_0   Neha Malcom Francis
• [PATCH v2 1/3] drivers: misc: k3_bist: Add K3 BIST driver   Neha Malcom Francis
  • [PATCH v2 1/3] drivers: misc: k3_bist: Add K3 BIST driver   Kumar, Udit
    • [PATCH v2 1/3] drivers: misc: k3_bist: Add K3 BIST driver   Neha Malcom Francis
• [PATCH 6/6] efi_loader: support file rename in SetInfo()   Ilias Apalodimas
• [PATCH] net: Kconfig: depend on DM_RNG for WGET_HTTPS   Jerome Forissier
  • [PATCH] net: Kconfig: depend on DM_RNG for WGET_HTTPS   Ilias Apalodimas
• Updated invitation: U-Boot community meeting @ Every 2 weeks from 9am to 10am on Tuesday (CST) (u-boot at lists.denx.de)   Tom Rini
• [PATCH v2] net: Kconfig: depend on DM_RNG for WGET_HTTPS   Jerome Forissier
  • [PATCH v2] net: Kconfig: depend on DM_RNG for WGET_HTTPS   Michal Simek
• [PATCH] py: Rename the rest of the boardenv files with "-" in their name   Tom Rini
  • [PATCH] py: Rename the rest of the boardenv files with "-" in their name   Tom Rini
• [PATCH v2 1/5] rockchip: io-domain: Add debug logging for regulators during probe   Quentin Schulz
  • [PATCH v2 1/5] rockchip: io-domain: Add debug logging for regulators during probe   Justin Klaassen
• [PATCH] CI: sifive_unleashed: Rename "spi-nor_qemu" variant to "spi_nor_qemu"   Tom Rini
• [PATCH v2 2/5] rockchip: io-domain: Add CONFIG_SPL_ROCKCHIP_IODOMAIN   Quentin Schulz
  • [PATCH v2 2/5] rockchip: io-domain: Add CONFIG_SPL_ROCKCHIP_IODOMAIN   Justin Klaassen
• [PATCH] rockchip: Enable OF_LIBFDT_OVERLAY by default   Chen-Yu Tsai
  • [PATCH] rockchip: Enable OF_LIBFDT_OVERLAY by default   Quentin Schulz
    • [PATCH] rockchip: Enable OF_LIBFDT_OVERLAY by default   Chen-Yu Tsai
      • [PATCH] rockchip: Enable OF_LIBFDT_OVERLAY by default   Quentin Schulz
• [PATCH] rockchip: rk3399: grf: Fix enum typos for UART2   Chen-Yu Tsai
  • [PATCH] rockchip: rk3399: grf: Fix enum typos for UART2   Quentin Schulz
  • [PATCH] rockchip: rk3399: grf: Fix enum typos for UART2   Paul Kocialkowski
  • [PATCH] rockchip: rk3399: grf: Fix enum typos for UART2   Kever Yang
• [PATCH v2 3/5] regulator: rk8xx: Add CONFIG_SPL_REGULATOR_RK8XX   Quentin Schulz
  • [PATCH v2 3/5] regulator: rk8xx: Add CONFIG_SPL_REGULATOR_RK8XX   Quentin Schulz
    • [PATCH v2 3/5] regulator: rk8xx: Add CONFIG_SPL_REGULATOR_RK8XX   Justin Klaassen
• [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Quentin Schulz
  • [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Chen-Yu Tsai
    • [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Paul Kocialkowski
• [PATCH v3 0/4] Enable bloblist support on Vexpress64   Harrison Mutai
  • [PATCH 1/4] bloblist: fix typo in code comments   Harrison Mutai
  • [PATCH 2/4] board: vexpress64: default to hardware device tree   Harrison Mutai
  • [PATCH 3/4] bloblist: add support for CONFIG_BLOBLIST_PASSAGE   Harrison Mutai
  • [PATCH 4/4] board: vexpress64: enable bloblist for SPL handoff   Harrison Mutai
  • [PATCH v3 0/4] Enable bloblist support on Vexpress64   Harrison Mutai
  • [PATCH v3 0/4] Enable bloblist support on Vexpress64   Tom Rini
• [PATCH 01/17] miiphy: Introduce mdio_init()   Paul Barker
  • [PATCH 01/17] miiphy: Introduce mdio_init()   Marek Vasut
• [PATCH 1/2] net: ravb: Drop empty init callback   Paul Barker
  • [PATCH 1/2] net: ravb: Drop empty init callback   Marek Vasut
• [PATCH] net: miiphybb: Convert ifdef DEBUG to debug()   Paul Barker
• [PATCH] net: miiphybb: Update debug() print   Paul Barker
• [PATCH v3 0/4] Introduce K3 remoteproc driver for M4 subsystem   Judith Mendez
• [PATCH 0/8] mediatek: final preparation for OF_UPSTREAM support   Tom Rini
• [PATCH v4] image: apply FDTOs on FDT image node without a load property   Tom Rini
• [PATCH 1/1] examples/api: improve determination of LOAD_ADDR   Tom Rini
• [PATCH 1/1] examples: eliminate CONFIG_STANDALONE_LOAD_ADDR   Tom Rini
• [PATCH] API: system info adds FLASH and clk fetches   Tom Rini
• [PATCH v1] examples: fix building on arm32   Tom Rini
• [PATCH] GitLab: Run sandbox on fast amd64 and fast arm64 hosts   Tom Rini
• [PATCH] Gitlab: Add results.xml to the list of artifacts as well.   Tom Rini
• [PATCH] sifive_unleashed: Rename "spi-nor_qemu" variant to "spi_nor_qemu"   Tom Rini
• [PATCH v2] zynqmp: Save "bootseq" environment variable in decimal format   egyszeregy at freemail.hu
  • [PATCH v2] zynqmp: Save "bootseq" environment variable in decimal format   Simon Glass
    • [PATCH v2] zynqmp: Save "bootseq" environment variable in decimal format   Michal Simek
• [PATCH v3 0/2] rockchip: rk3308-rock-s0: Fix SD-card boot on v1.1 hw revision   Jonas Karlman
  • [PATCH v3 1/2] arm64: dts: rockchip: Fix sdmmc access on rk3308-rock-s0 v1.1 boards   Jonas Karlman
  • [PATCH v3 2/2] rockchip: rk3308-rock-s0: Fix SD-card boot on v1.1 hw revision   Jonas Karlman
  • [PATCH v3 0/2] rockchip: rk3308-rock-s0: Fix SD-card boot on v1.1 hw revision   Kever Yang
• U-Boot community meeting @ Tue Feb 11, 2025 9am - 10am (CST) (u-boot at lists.denx.de)   Tom Rini
• [PATCH 0/6] Rework requirements.txt files   Tom Rini
  • [PATCH 1/6] python: Create requirements.txt files for each "project"   Tom Rini
  • [PATCH 2/6] CI: Be consistent in creating and starting our virtualenv   Tom Rini
  • [PATCH 3/6] CI: Consistently install our requirements.txt files   Tom Rini
  • [PATCH 4/6] CI: Invoke pip once rather than multiple times   Tom Rini
  • [PATCH 5/6] python: Recreate test/py and tools/buildman requirements.txt files   Tom Rini
  • [PATCH 6/6] Dockerfile: Update for having more requirements.txt files   Tom Rini
  • [PATCH 0/6] Rework requirements.txt files   Tom Rini
• [PATCH] buildman: Update tests for newer filelock module   Simon Glass
  • [PATCH] buildman: Update tests for newer filelock module   Tom Rini
  • [PATCH] buildman: Update tests for newer filelock module   Tom Rini
• [PATCH] mediatek: mt7986: rename pinctrl to pio in mt7986-u-boot.dtsi   Weijie Gao
• [PATCH] mediatek: mt7981: enable ethernet switch auto-detction   Weijie Gao
  • [PATCH] mediatek: mt7981: enable ethernet switch auto-detction   Tom Rini
• [PATCH] pinctrl: mediatek: support reading register base address by name   Weijie Gao
• [PATCH 00/29] VBE serial part H: Implement VBE on Rockchip RK3399   Simon Glass
  • [PATCH 16/29] rockchip: Set the skip-at-start property correctly   Simon Glass
    • [PATCH 16/29] rockchip: Set the skip-at-start property correctly   Jonas Karlman
      • [PATCH 16/29] rockchip: Set the skip-at-start property correctly   Simon Glass
  • [PATCH 00/29] VBE serial part H: Implement VBE on Rockchip RK3399   Jonas Karlman
    • [PATCH 00/29] VBE serial part H: Implement VBE on Rockchip RK3399   Simon Glass
• [PATCH 01/29] arm: Support a separate stack for VPL   Simon Glass
  • [PATCH 01/29] arm: Support a separate stack for VPL   Tom Rini
  • [PATCH 01/29] arm: Support a separate stack for VPL   Jonas Karlman
• [PATCH 02/29] spl: Adjust xPL symbols   Simon Glass
  • [PATCH 02/29] spl: Adjust xPL symbols   Tom Rini
• [PATCH 03/29] spl: Allow VBE to handle xPL size   Simon Glass
• [PATCH 04/29] vbe: Show the margin when using SPL_RELOC   Simon Glass
• [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Simon Glass
  • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Jonas Karlman
    • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Simon Glass
      • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Jonas Karlman
      • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Simon Glass
      • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Jonas Karlman
      • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Simon Glass
      • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Jonas Karlman
      • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Simon Glass
      • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Tom Rini
      • [PATCH 05/29] rockchip: Allow RAM init to happen in SPL on rk3399   Simon Glass
• [PATCH 06/29] rockchip: dts: Factor out arch and compression   Simon Glass
  • [PATCH 06/29] rockchip: dts: Factor out arch and compression   Jonas Karlman
• [PATCH 07/29] rockchip: Add an fdtmap   Simon Glass
• [PATCH 08/29] rockchip: Add more space below the stack pointer with kevin   Simon Glass
  • [PATCH 08/29] rockchip: Add more space below the stack pointer with kevin   Jonas Karlman
• [PATCH 09/29] rockchip: dts: Create a template for the FIT   Simon Glass
  • [PATCH 09/29] rockchip: dts: Create a template for the FIT   Jonas Karlman
• [PATCH 10/29] rockchip: dts: Un-indent the FIT template   Simon Glass
• [PATCH 11/29] rockchip: dts: Correct the OS for U-Boot   Simon Glass
  • [PATCH 11/29] rockchip: dts: Correct the OS for U-Boot   Jonas Karlman
• [PATCH 12/29] rockchip: Specify the phase in the image   Simon Glass
• [PATCH 13/29] rockchip: Provide a bootstd configuration   Simon Glass
• [PATCH 14/29] rockchip: Add SPL into the main FIT   Simon Glass
  • [PATCH 14/29] rockchip: Add SPL into the main FIT   Jonas Karlman
    • [PATCH 14/29] rockchip: Add SPL into the main FIT   Simon Glass
• [PATCH 15/29] rockchip: Include a compatible string in each configuration   Simon Glass
• [PATCH 17/29] rockchip: Add a template for SPL   Simon Glass
• [PATCH 18/29] rockchip: Add a VPL image   Simon Glass
• [PATCH 19/29] rockchip: Add TPL alternatives   Simon Glass
  • [PATCH 19/29] rockchip: Add TPL alternatives   Jonas Karlman
    • [PATCH 19/29] rockchip: Add TPL alternatives   Simon Glass
• [PATCH 20/29] rockchip: Update rk3399 bootph-tags for VPL   Simon Glass
  • [PATCH 20/29] rockchip: Update rk3399 bootph-tags for VPL   Jonas Karlman
• [PATCH 21/29] rockchip: Provide a VPL phase on rk3399   Simon Glass
  • [PATCH 21/29] rockchip: Provide a VPL phase on rk3399   Jonas Karlman
    • [PATCH 21/29] rockchip: Provide a VPL phase on rk3399   Simon Glass
      • [PATCH 21/29] rockchip: Provide a VPL phase on rk3399   Jonas Karlman
      • [PATCH 21/29] rockchip: Provide a VPL phase on rk3399   Simon Glass
• [PATCH 22/29] rockchip: Add symbols for spl_reloc   Simon Glass
• [PATCH 23/29] rockchip: Adjust rk3399 TPL-stack to the same as SPL   Simon Glass
  • [PATCH 23/29] rockchip: Adjust rk3399 TPL-stack to the same as SPL   Jonas Karlman
• [PATCH 24/29] rockchip: Allow SPL to set up SDRAM   Simon Glass
• [PATCH 25/29] rockchip: Add a generic rk3399 board   Simon Glass
  • [PATCH 25/29] rockchip: Add a generic rk3399 board   Jonas Karlman
    • [PATCH 25/29] rockchip: Add a generic rk3399 board   Simon Glass
• [PATCH 26/29] rockchip: Add documentation for VBE   Simon Glass
• [PATCH 27/29] gitlab: Add an VBE board to the sjg lab   Simon Glass
• [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
  • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
  • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Raymond Mao
    • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Raymond Mao
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Raymond Mao
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Raymond Mao
      • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
  • [PATCH 28/29] Revert "bloblist: Load the bloblist from the previous loader"   Michal Simek
• [PATCH 29/29] bloblist: Allow relocation at the end of the SPL phase   Simon Glass
  • [PATCH 29/29] bloblist: Allow relocation at the end of the SPL phase   Tom Rini
    • [PATCH 29/29] bloblist: Allow relocation at the end of the SPL phase   Simon Glass
      • [PATCH 29/29] bloblist: Allow relocation at the end of the SPL phase   Tom Rini
  • [PATCH 29/29] bloblist: Allow relocation at the end of the SPL phase   Raymond Mao
    • [PATCH 29/29] bloblist: Allow relocation at the end of the SPL phase   Simon Glass
      • [PATCH 29/29] bloblist: Allow relocation at the end of the SPL phase   Raymond Mao
      • [PATCH 29/29] bloblist: Allow relocation at the end of the SPL phase   Simon Glass
      • [PATCH 29/29] bloblist: Allow relocation at the end of the SPL phase   Tom Rini
• [PATCH v1] net: designware: support phy io micro voltage setting.   Michael Chang
  • [PATCH v1] net: designware: support phy io micro voltage setting.   Tom Rini
• [PATCH v2] board: starfive: Update the maintainer file for VisionFive 2 board   Hal Feng
  • [PATCH v2] board: starfive: Update the maintainer file for VisionFive 2 board   Tom Rini
    • [PATCH v2] board: starfive: Update the maintainer file for VisionFive 2 board   Hal Feng
    • [PATCH v2] board: starfive: Update the maintainer file for VisionFive 2 board   Simon Glass
      • [PATCH v2] board: starfive: Update the maintainer file for VisionFive 2 board   Hal Feng
• [PATCH v1] board: nuvoton: use an event to replace last_stage_init()   Michael Chang
  • [PATCH v1] board: nuvoton: use an event to replace last_stage_init()   Tom Rini
• [PATCH] rockchip: theobroma-systems: use HAVE_VENDOR_COMMON_LIB to simplify Makefile   Kever Yang
• [PATCH v1] board: starfive: Update the maintainer file for VisionFive 2 board   Hal Feng
• [PATCH v3 2/3] rockchip: sdram: Limit usable ram_top to max 4G   Kever Yang
• [PATCH v3 3/3] rockchip: sdram: Ensure ram_base is correct in SPL   Kever Yang
• [PATCH v2 1/3] arch: arm: dts: phyboard-electra-uboot.dtsi: Add bootph props to i2c   Wadim Egorov
  • [PATCH v2 2/3] board: phytec: phycore_am64x: Add support for 1 GB RAM variant and ECC   Wadim Egorov
    • [PATCH v2 2/3] board: phytec: phycore_am64x: Add support for 1 GB RAM variant and ECC   Dhruva Gole
      • [PATCH v2 2/3] board: phytec: phycore_am64x: Add support for 1 GB RAM variant and ECC   Wadim Egorov
  • [PATCH v2 3/3] configs: phycore_am64x_r5_defconfig: Enable PHYTEC_SOM_DETECTION   Wadim Egorov
    • [PATCH v2 3/3] configs: phycore_am64x_r5_defconfig: Enable PHYTEC_SOM_DETECTION   Dhruva Gole
  • [PATCH v2 1/3] arch: arm: dts: phyboard-electra-uboot.dtsi: Add bootph props to i2c   Dhruva Gole
  • [PATCH v2 1/3] arch: arm: dts: phyboard-electra-uboot.dtsi: Add bootph props to i2c   Tom Rini
• [PATCH 2/4] clk/qcom: Treat different GDSCs didderently   Alexey Minnekhanov
• [PATCH v1 0/6] Fix page permission on arm64 architectures   Ilias Apalodimas
  • [PATCH v1 1/6] meminfo: add memory details for armv8   Ilias Apalodimas
    • [PATCH v1 1/6] meminfo: add memory details for armv8   Jerome Forissier
      • [PATCH v1 1/6] meminfo: add memory details for armv8   Ilias Apalodimas
    • [PATCH v1 1/6] meminfo: add memory details for armv8   Caleb Connolly
  • [PATCH v1 2/6] doc: update meminfo with arch specific information   Ilias Apalodimas
    • [PATCH v1 2/6] doc: update meminfo with arch specific information   Tom Rini
    • [PATCH v1 2/6] doc: update meminfo with arch specific information   Ilias Apalodimas
    • [PATCH v1 2/6] doc: update meminfo with arch specific information   Simon Glass
      • [PATCH v1 2/6] doc: update meminfo with arch specific information   Ilias Apalodimas
  • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Ilias Apalodimas
    • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Ilias Apalodimas
      • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Michal Simek
      • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Ilias Apalodimas
      • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Tom Rini
    • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Richard Henderson
    • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Tom Rini
    • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Ilias Apalodimas
    • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Ilias Apalodimas
      • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Tom Rini
      • [PATCH v1 3/6] arm: Prepare linker scripts for memory permissions   Ilias Apalodimas
  • [PATCH v1 4/6] arm64: mmu_change_region_attr() add an option not to break PTEs   Ilias Apalodimas
  • [PATCH v1 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
    • [PATCH v1 5/6] treewide: Add a function to change page permissions   Heinrich Schuchardt
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Heinrich Schuchardt
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Simon Glass
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Simon Glass
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Simon Glass
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Simon Glass
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Tom Rini
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Tom Rini
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Simon Glass
      • Re: [PATCH v1 5/6] treewide: Add a function to change page permissions   Heinrich Schuchardt
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
      • [PATCH v1 5/6] treewide: Add a function to change page permissions   Tom Rini
  • [PATCH v1 6/6] arm64: Enable RW, RX and RO mappings for the relocated binary   Ilias Apalodimas
    • [PATCH v1 6/6] arm64: Enable RW, RX and RO mappings for the relocated binary   Jerome Forissier
      • [PATCH v1 6/6] arm64: Enable RW, RX and RO mappings for the relocated binary   Ilias Apalodimas
      • [PATCH v1 6/6] arm64: Enable RW, RX and RO mappings for the relocated binary   Tom Rini
  • [PATCH v1 0/6] Fix page permission on arm64 architectures   Neil Armstrong
  • [PATCH v1 0/6] Fix page permission on arm64 architectures   Simon Glass
• [PATCH 00/10] phyCORE-AM62x/AM64x: Add RAUC and Secure Boot   Daniel Schultz
  • [PATCH 01/10] board: phytec: common: k3: Introduce Configs to Sign Images   Daniel Schultz
  • [PATCH 02/10] board: phytec: common: k3: Introduce PHYTEC_K3_EMBED_RAUC_ENV   Daniel Schultz
  • [PATCH 03/10] board: phytec: common: k3: Introduce PHYTEC_K3_DOFITBOOT_DEFAULT   Daniel Schultz
  • [PATCH 04/10] board: Phytec: phycore_am6*: Add k3 Kconfig to A53   Daniel Schultz
  • [PATCH 05/10] arch: arm: dts: k3-am625-phycore-som-binman: Add custMpk and ti-degenerate keys with CONFIG entries   Daniel Schultz
  • [PATCH 06/10] arch: arm: dts: k3-am642-phycore-som-binman: Add custMpk and ti-degenerate keys with CONFIG entries   Daniel Schultz
  • [PATCH 07/10] include: env: phytec: k3_mmc: Use PHYTEC_K3_EMBED_RAUC_ENV to enable RAUC   Daniel Schultz
  • [PATCH 08/10] include: env: phytec: k3_mmc: Add support for FIT boot   Daniel Schultz
  • [PATCH 09/10] board: phytec: phycore_am62x: Update environment for fitboot   Daniel Schultz
  • [PATCH 10/10] board: phytec: phycore_am64x: Update environment for fitboot   Daniel Schultz
  • [PATCH 00/10] phyCORE-AM62x/AM64x: Add RAUC and Secure Boot   Tom Rini
    • [PATCH 00/10] phyCORE-AM62x/AM64x: Add RAUC and Secure Boot   Daniel Schultz
      • [PATCH 00/10] phyCORE-AM62x/AM64x: Add RAUC and Secure Boot   Tom Rini
      • [PATCH 00/10] phyCORE-AM62x/AM64x: Add RAUC and Secure Boot   Daniel Schultz
• [PATCH] Add 'bootsource' /chosen property   Quentin Schulz
  • [PATCH] Add 'bootsource' /chosen property   Simon Glass
    • [PATCH] Add 'bootsource' /chosen property   Quentin Schulz
      • [PATCH] Add 'bootsource' /chosen property   Simon Glass
      • [PATCH] Add 'bootsource' /chosen property   Quentin Schulz
      • [PATCH] Add 'bootsource' /chosen property   Simon Glass
      • [PATCH] Add 'bootsource' /chosen property   Mark Kettenis
      • [PATCH] Add 'bootsource' /chosen property   Simon Glass
      • [PATCH] Add 'bootsource' /chosen property   Quentin Schulz
      • [PATCH] Add 'bootsource' /chosen property   Daniel Golle
      • [PATCH] Add 'bootsource' /chosen property   Quentin Schulz
      • [PATCH] Add 'bootsource' /chosen property   Daniel Golle
      • [PATCH] Add 'bootsource' /chosen property   Quentin Schulz
      • [PATCH] Add 'bootsource' /chosen property   Simon Glass
      • [PATCH] Add 'bootsource' /chosen property   Ahmad Fatoum
• [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
  • [RFC PATCH v1 01/20] include: dt-bindings: clk: introduce bindings for rp1 clock   Oleksii Moisieiev
    • [RFC PATCH v1 01/20] include: dt-bindings: clk: introduce bindings for rp1 clock   Tom Rini
      • [RFC PATCH v1 01/20] include: dt-bindings: clk: introduce bindings for rp1 clock   Oleksii Moisieiev
  • [RFC PATCH v1 03/20] arch: arm: mach-bcm283x: add pcie memory region to BCM2712 memmap   Oleksii Moisieiev
  • [RFC PATCH v1 02/20] include: dt-bindings: mfd: introduce bindings for RP1 driver   Oleksii Moisieiev
  • [RFC PATCH v1 06/20] drivers: pci: take into account that ofnode_read_pci_vendev can fail   Oleksii Moisieiev
  • [RFC PATCH v1 05/20] drivers: net: macb: do not include arch/clk.h when clocks enabled   Oleksii Moisieiev
  • [RFC PATCH v1 04/20] arch: arm: mach-bcm283x: add BCM2712 board support   Oleksii Moisieiev
  • [RFC PATCH v1 08/20] board: raspberrypi: rpi: save board_type to the global_data   Oleksii Moisieiev
  • [RFC PATCH v1 07/20] drivers: core: of_addr: fix of_get_dma_range translation   Oleksii Moisieiev
  • [RFC PATCH v1 09/20] drivers: pci: add BCM2712 support for pcie_brcmstb driver   Oleksii Moisieiev
  • [RFC PATCH v1 11/20] drivers: gpio: add support of RP1 GPIO for Raspberry PI 5   Oleksii Moisieiev
  • [RFC PATCH v1 10/20] drivers: mfd: introduce RP1 chip driver for RPI5   Oleksii Moisieiev
  • [RFC PATCH v1 12/20] drivers: reset: introduce reset drivers for brcmstb   Oleksii Moisieiev
  • [RFC PATCH v1 13/20] drivers: clk: introduce clock driver for RP1   Oleksii Moisieiev
  • [RFC PATCH v1 14/20] drivers: net: macb: introduce ePCI connection support for macb   Oleksii Moisieiev
  • [RFC PATCH v1 17/20] HACK: drivers: mfd: set bar configuration for RP1 driver   Oleksii Moisieiev
  • [RFC PATCH v1 15/20] configs: add support for the Raspberrypi 5 board to default config   Oleksii Moisieiev
  • [RFC PATCH v1 16/20] board: raspberrypi: rpi: request RP1 in late_init   Oleksii Moisieiev
  • [RFC PATCH v1 18/20] drivers: pci: pcie_brcmstb: use bus_base to config PCI device   Oleksii Moisieiev
  • [RFC PATCH v1 19/20] drivers: pci: pcie_brcmstb: set correct reset state on pcie_remove   Oleksii Moisieiev
  • [RFC PATCH v1 20/20] bcm2712: enable linux kernel image header   Oleksii Moisieiev
  • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Simon Glass
    • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
      • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Simon Glass
      • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
      • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Tom Rini
      • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
      • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
  • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Etienne Dublé
    • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
  • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Peter Robinson
    • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
    • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Peter Robinson
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
  • [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
    • [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
      • [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
      • [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
      • [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
      • [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
• [RFC PATCH v1 11/20] drivers: gpio: add support of RP1 GPIO for Raspberry PI 5   Marek Behún
  • [RFC PATCH v1 11/20] drivers: gpio: add support of RP1 GPIO for Raspberry PI 5   Marek Behún
• [PATCH 2/3] rockchip: Fix SPL link error for Radxa ROCK Pi 4   Quentin Schulz
  • [PATCH 2/3] rockchip: Fix SPL link error for Radxa ROCK Pi 4   Jonas Karlman
• [PATCH 3/3] rockchip: Fix binman error   Quentin Schulz
  • [PATCH 3/3] rockchip: Fix binman error   Simon Glass
    • [PATCH 3/3] rockchip: Fix binman error   Quentin Schulz
      • [PATCH 3/3] rockchip: Fix binman error   Simon Glass
      • [PATCH 3/3] rockchip: Fix binman error   FUKAUMI Naoki
  • [PATCH 3/3] rockchip: Fix binman error   FUKAUMI Naoki
• [PATCH] test/py: usb: Fix format string for fstype command   Andrew Goodbody
  • [PATCH] test/py: usb: Fix format string for fstype command   Marek Vasut
  • [PATCH] test/py: usb: Fix format string for fstype command   Love Kumar
  • [PATCH] test/py: usb: Fix format string for fstype command   Tom Rini
• [PATCH] board: ti: am62px: tifs-rm-cfg/rm-cfg: Update DMA resource sharing for CPSW   Siddharth Vadapalli
  • [PATCH] board: ti: am62px: tifs-rm-cfg/rm-cfg: Update DMA resource sharing for CPSW   Tom Rini
• [PATCH] tools: mkenvimage: List -V parameter in help text   Marek Vasut
  • [PATCH] tools: mkenvimage: List -V parameter in help text   Tom Rini
• [PATCH] tools: mkenvimage: Add pure shell implementation of mkenvimage   Marek Vasut
  • [PATCH] tools: mkenvimage: Add pure shell implementation of mkenvimage   Simon Glass
    • [PATCH] tools: mkenvimage: Add pure shell implementation of mkenvimage   Marek Vasut
      • [PATCH] tools: mkenvimage: Add pure shell implementation of mkenvimage   Simon Glass
      • [PATCH] tools: mkenvimage: Add pure shell implementation of mkenvimage   Marek Vasut
      • [PATCH] tools: mkenvimage: Add pure shell implementation of mkenvimage   Alexander Dahl
      • [PATCH] tools: mkenvimage: Add pure shell implementation of mkenvimage   Marek Vasut
  • [PATCH] tools: mkenvimage: Add pure shell implementation of mkenvimage   Rasmus Villemoes
    • [PATCH] tools: mkenvimage: Add pure shell implementation of mkenvimage   Marek Vasut
• [PATCH 1/6] rockchip: mkimage: Split size_and_off and size_and_nimage   Quentin Schulz
  • [PATCH 1/6] rockchip: mkimage: Split size_and_off and size_and_nimage   Jonas Karlman
• [PATCH 2/6] rockchip: mkimage: Print image information for all embedded images   Quentin Schulz
  • [PATCH 2/6] rockchip: mkimage: Print image information for all embedded images   Jonas Karlman
    • [PATCH 2/6] rockchip: mkimage: Print image information for all embedded images   Quentin Schulz
• [PATCH] cmd: Fix potential memory leaks   Maks Mishin
  • [PATCH] cmd: Fix potential memory leaks   Tom Rini
• [PATCH 3/6] rockchip: mkimage: Print boot0 and boot1 parameters   Quentin Schulz
  • [PATCH 3/6] rockchip: mkimage: Print boot0 and boot1 parameters   Jonas Karlman
    • [PATCH 3/6] rockchip: mkimage: Print boot0 and boot1 parameters   Quentin Schulz
      • [PATCH 3/6] rockchip: mkimage: Print boot0 and boot1 parameters   Jonas Karlman
• [PATCH] tools: proftool: Fix potential memory leaks   Maks Mishin
  • [PATCH] tools: proftool: Fix potential memory leaks   Tom Rini
• [PATCH 4/6] rockchip: mkimage: Add option to change image offset alignment   Quentin Schulz
  • [PATCH 4/6] rockchip: mkimage: Add option to change image offset alignment   Jonas Karlman
• [PATCH 5/6] rockchip: mkimage: Add support for up to 4 input files   Quentin Schulz
  • [PATCH 5/6] rockchip: mkimage: Add support for up to 4 input files   Jonas Karlman
    • [PATCH 5/6] rockchip: mkimage: Add support for up to 4 input files   Quentin Schulz
• [PATCH 6/6] rockchip: mkimage: Add option for image load address and flag   Quentin Schulz
  • [PATCH 6/6] rockchip: mkimage: Add option for image load address and flag   Jonas Karlman
    • [PATCH 6/6] rockchip: mkimage: Add option for image load address and flag   Quentin Schulz
• [PATCH 2/5] rockchip: Improve ARMv7 support for ROCKCHIP_COMMON_STACK_ADDR   Quentin Schulz
  • [PATCH 2/5] rockchip: Improve ARMv7 support for ROCKCHIP_COMMON_STACK_ADDR   Jonas Karlman
  • [PATCH 2/5] rockchip: Improve ARMv7 support for ROCKCHIP_COMMON_STACK_ADDR   Alex Bee
    • [PATCH 2/5] rockchip: Improve ARMv7 support for ROCKCHIP_COMMON_STACK_ADDR   Jonas Karlman
• [PATCH v3 0/5] rockchip: rk3399: rk3399-nanopi-4: Fix SD power initialization in SPL   Justin Klaassen
  • [PATCH v3 1/5] rockchip: io-domain: Add debug logging for regulators during probe   Justin Klaassen
    • [PATCH v3 1/5] rockchip: io-domain: Add debug logging for regulators during probe   Quentin Schulz
  • [PATCH v3 2/5] rockchip: io-domain: Add CONFIG_SPL_ROCKCHIP_IODOMAIN   Justin Klaassen
    • [PATCH v3 2/5] rockchip: io-domain: Add CONFIG_SPL_ROCKCHIP_IODOMAIN   Quentin Schulz
  • [PATCH v3 3/5] regulator: rk8xx: Add CONFIG_SPL_REGULATOR_RK8XX   Justin Klaassen
  • [PATCH v3 4/5] rockchip: rk3399-nanopi-4: Allow MMC driver to control SD regulators   Justin Klaassen
  • [PATCH v3 5/5] rockchip: rk3399-nanopi-4: Enable IO-domain driver in SPL   Justin Klaassen
• [PULL] u-boot-sh/master   Marek Vasut
  • [PULL] u-boot-sh/master   Tom Rini
  • [PULL] u-boot-sh/master   Marek Vasut
    • [PULL] u-boot-sh/master   Tom Rini
• [PATCH] gitlab: Add a Zynq Zybo to the sjg lab   Simon Glass
• [PATCH] armv7m: kconfig adds the NVIC option and masks the GIC option when NVIC is selected   Tom Rini
• [PATCH] arm: kconfig should not display the STATIC_MACH_TYPE option when SUPPORT_PASSING_ATAGS is not selected   Tom Rini
• [PATCH] arm64: configs: Remove SYS_BOOTM_LEN for TI devices   Tom Rini
• [PATCH, RESEND] mediatek: mt7986: rename pinctrl to pio in mt7986-u-boot.dtsi   Weijie Gao
  • [PATCH, RESEND] mediatek: mt7986: rename pinctrl to pio in mt7986-u-boot.dtsi   Tom Rini
• [PATCH v4 0/6] Introduce K3 remoteproc driver for M4 subsystem   Judith Mendez
  • [PATCH v4 1/6] remoteproc: k3-m4: Introduce K3 remote proc driver for M4 subsystem   Judith Mendez
  • [PATCH v4 4/6] board: ti: am62x: Add remoteproc specific env support   Judith Mendez
  • [PATCH v4 5/6] board: ti: am62px: Add remoteproc specific env support   Judith Mendez
  • [PATCH v4 6/6] configs: am6*_evm_a53_defconfig: Enable remoteproc support   Judith Mendez
    • [PATCH v4 6/6] configs: am6*_evm_a53_defconfig: Enable remoteproc support   Andrew Davis
      • [PATCH v4 6/6] configs: am6*_evm_a53_defconfig: Enable remoteproc support   Judith Mendez
• [PATCH v4 2/6] remoteproc: k3-r5: Add support for R5F cores on AM64x SoCs   Judith Mendez
• [PATCH v4 3/6] board: ti: am64x: Add remoteproc specific env support   Judith Mendez
• [PATCH 1/2] pinctrl: mediatek: mt7988: remove _base from reg-names   Weijie Gao
  • [PATCH 2/2] pinctrl: mediatek: support reading register base address by name   Weijie Gao
  • [PATCH 1/2] pinctrl: mediatek: mt7988: remove _base from reg-names   Tom Rini
• [GIT PULL] amd/xilinx patches for v2025.04-rc2   Michal Simek
  • [GIT PULL] amd/xilinx patches for v2025.04-rc2   Tom Rini
    • [GIT PULL] amd/xilinx patches for v2025.04-rc2   Michal Simek
      • [GIT PULL] amd/xilinx patches for v2025.04-rc2   Tom Rini
• [PATCH v4] usb: gadget: g_dnl: Fix NULLPTR dereference when serial# is unset   Mattijs Korpershoek
• [PATCH] boot: android: handle boot images with missing DTB   Mattijs Korpershoek
• [PATCH v1] arch: arm: dts: agilex5: Enable I2C3   alif.zakuan.yuslaimi at intel.com
  • [PATCH v1] arch: arm: dts: agilex5: Enable I2C3   Chee, Tien Fong
• [PATCH] pci: dw_common: Set INCREASE_REGION_SIZE flag based on limit address   Neil Armstrong
  • [PATCH] pci: dw_common: Set INCREASE_REGION_SIZE flag based on limit address   Neil Armstrong
    • [PATCH] pci: dw_common: Set INCREASE_REGION_SIZE flag based on limit address   Tom Rini
• [PATCH] clk: versal: Update the reference clocks as per bindings   Venkatesh Yadav Abbarapu
  • [PATCH] clk: versal: Update the reference clocks as per bindings   Michal Simek
• [PATCH] tpm: unconstify tpm_tis_chip_data   Ilias Apalodimas
  • [PATCH] tpm: unconstify tpm_tis_chip_data   Tom Rini
• [PATCH] amd: versal2: Enable reset and power domain drivers   Venkatesh Yadav Abbarapu
  • [PATCH] amd: versal2: Enable reset and power domain drivers   Michal Simek
• Enabling test/py/tests/test_spi.py more?   Love Kumar
  • Enabling test/py/tests/test_spi.py more?   Tom Rini
    • Enabling test/py/tests/test_spi.py more?   Tom Rini
• [PATCH 1/1] configs: microchip_mpfs_icicle: set DEFAULT_FDT_FILE   Heinrich Schuchardt
  • [PATCH 1/1] configs: microchip_mpfs_icicle: set DEFAULT_FDT_FILE   Leo Liang
• [PATCH] common: Fix memory leak and incorrect comparison   Maks Mishin
  • [PATCH] common: Fix memory leak and incorrect comparison   Tom Rini
• 2025.04-rc1 breaks booting 6.13 on VisionFive 2 v1.2A   Andreas Schwab
• [PATCH v2 0/2] EFI Capsule update explicitly sets dfu_alt_info   Jonathan Humphreys
• [PATCH v2 1/2] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Jonathan Humphreys
  • [PATCH v2 1/2] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Michal Simek
    • [PATCH v2 1/2] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Mattijs Korpershoek
• [PATCH v2 2/2] board: remove capsule update support in set_dfu_alt_info()   Jonathan Humphreys
  • [PATCH v2 2/2] board: remove capsule update support in set_dfu_alt_info()   Neil Armstrong
• [PATCH 0/8] EFI net driver - series 1/2: Support multiple EFI net objects   Adriano Cordova
  • [PATCH 1/8] legacy-net: wget: fix wget_info handling after new tcp legacy stack   Adriano Cordova
  • [PATCH 2/8] efi_loader: expose symbols to be used by the EFI network stack   Adriano Cordova
  • [PATCH 3/8] efi_loader: efi_setup: Add efi_start_obj_list() to efi_setup.c   Adriano Cordova
  • [PATCH 4/8] efi_loader: efi_net: Add efi_net_do_start() to efi_net.c   Adriano Cordova
  • [PATCH 5/8] efi_loader: efi_device_path: Pass net udevice as argument   Adriano Cordova
  • [PATCH 6/8] efi_loader: efi_net: Add device path cache   Adriano Cordova
  • [PATCH 7/8] efi_loader: efi_net: Add dhcp cache   Adriano Cordova
  • [PATCH 8/8] efi_loader: efi_net: Add support for multiple efi_net_obj   Adriano Cordova
• [PATCH] arm64: zynqmp: versal: Consistently use enum tcm_mode   Marek Vasut
  • [PATCH] arm64: zynqmp: versal: Consistently use enum tcm_mode   Love Kumar
  • [PATCH] arm64: zynqmp: versal: Consistently use enum tcm_mode   Michal Simek
• [PATCH] lib: ecdsa: fix prevent memory leak in ecdsa_add_verify_data   Anton Moryakov
  • [PATCH] lib: ecdsa: fix prevent memory leak in ecdsa_add_verify_data   Anton Moryakov
• [PATCH] common: fix: add NULL checks for malloc_cache_aligned in   Anton Moryakov
  • [PATCH] common: fix: add NULL checks for malloc_cache_aligned in   Tom Rini
• [PATCH] common: fix: add NULL checks for xrealloc in make_string   Anton Moryakov
  • [PATCH] common: fix: add NULL checks for xrealloc in make_string   Tom Rini
• [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
  • [PATCH v3 2/2] CI: Use different git-directories for concurrent runners   Simon Glass
    • [PATCH v3 2/2] CI: Use different git-directories for concurrent runners   Tom Rini
  • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
  • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
    • [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
      • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
      • [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
      • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
      • [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
      • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
      • [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
      • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
      • [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
      • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
      • [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
      • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
      • [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
      • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
      • [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
      • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
      • [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
      • [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
• [PATCH v2] board: nuvoton: use an event to replace last_stage_init()   Michael Chang
  • [PATCH v2] board: nuvoton: use an event to replace last_stage_init()   Tom Rini
• Security vulnerabilities report to Das-U-Boot   Jonathan Bar Or
  • Security vulnerabilities report to Das-U-Boot   Tom Rini
    • Security vulnerabilities report to Das-U-Boot   Jonathan Bar Or
      • Security vulnerabilities report to Das-U-Boot   Tom Rini
      • Security vulnerabilities report to Das-U-Boot   Gao Xiang
      • Security vulnerabilities report to Das-U-Boot   Jonathan Bar Or
      • Security vulnerabilities report to Das-U-Boot   Tom Rini
      • Security vulnerabilities report to Das-U-Boot   Jonathan Bar Or
      • Security vulnerabilities report to Das-U-Boot   Miquel Raynal
      • Security vulnerabilities report to Das-U-Boot   Jonathan Bar Or
      • Security vulnerabilities report to Das-U-Boot   Jonathan Bar Or
      • Security vulnerabilities report to Das-U-Boot   Jonathan Bar Or
      • Security vulnerabilities report to Das-U-Boot   Tom Rini
      • Security vulnerabilities report to Das-U-Boot   Jonathan Bar Or
• [PATCH] xilinx: zynq: Guard code around SPL_FS_LOAD_PAYLOAD_NAME   Michal Simek
  • [PATCH] xilinx: zynq: Guard code around SPL_FS_LOAD_PAYLOAD_NAME   Michal Simek
• [PATCH] xilinx: Enable mkfwumdata tool for a/b update for Kria   Michal Simek
  • [PATCH] xilinx: Enable mkfwumdata tool for a/b update for Kria   Michal Simek
• [PATCH 0/4] phyCORE-AM62x/AM64x: Sign Images with External Keys   Daniel Schultz
  • [PATCH 1/4] board: phytec: common: k3: Introduce Configs to Sign Images   Daniel Schultz
    • [PATCH 1/4] board: phytec: common: k3: Introduce Configs to Sign Images   Andrew Davis
      • [PATCH 1/4] board: phytec: common: k3: Introduce Configs to Sign Images   Daniel Schultz
  • [PATCH 2/4] board: Phytec: phycore_am6*: Add k3 Kconfig to A53   Daniel Schultz
  • [PATCH 3/4] arch: arm: dts: k3-am625-phycore-som-binman: Add custMpk and ti-degenerate keys with CONFIG entries   Daniel Schultz
  • [PATCH 4/4] arch: arm: dts: k3-am642-phycore-som-binman: Add custMpk and ti-degenerate keys with CONFIG entries   Daniel Schultz
• [PATCH v2 1/1] configs: SiFive Unmatched: add 'nvme scan' to preboot   Heinrich Schuchardt
• [PATCH 0/7] board: samsung: e850-96: Enable Standard Boot   Minkyu Kang
• [PATCH v3 0/6] FAT file renaming   Daniel Venzin
  • [PATCH v3 1/6] fs: Add unimplemented rename hook to FS layer   Daniel Venzin
    • [PATCH v3 1/6] fs: Add unimplemented rename hook to FS layer   Heinrich Schuchardt
    • [PATCH v3 1/6] fs: Add unimplemented rename hook to FS layer   Heinrich Schuchardt
  • [PATCH v3 2/6] efi_loader: Support for file renaming   Daniel Venzin
    • [PATCH v3 2/6] efi_loader: Support for file renaming   Heinrich Schuchardt
  • [PATCH v3 3/6] fs: fat: Refactor delete_dentry_long interface   Daniel Venzin
    • [PATCH v3 3/6] fs: fat: Refactor delete_dentry_long interface   Heinrich Schuchardt
  • [PATCH v3 4/6] fs: fat: Support basic file rename   Daniel Venzin
    • [PATCH v3 4/6] fs: fat: Support basic file rename   Heinrich Schuchardt
      • [PATCH v3 4/6] fs: fat: Support basic file rename   Heinrich Schuchardt
  • [PATCH v3 5/6] cmd: fat: Add fatrnfile command   Daniel Venzin
    • [PATCH v3 5/6] cmd: fat: Add fatrnfile command   Heinrich Schuchardt
  • [PATCH v3 6/6] test/py: fs: Add fstest/rnfile test   Daniel Venzin
• [PATCH] board: kobol: helios4: enable ddr odt0 on write for both chip-select   Josua Mayer
• [PATCH 01/19] mbedtls: Add SHA symbols for VPL   Raymond Mao
• [PATCH 0/6] board: starfive: DeepComputing FML13V01   Heinrich Schuchardt
  • [PATCH 2/6] riscv: dts: starfive: DeepComputing FML13V01 binman config   Heinrich Schuchardt
    • [PATCH 2/6] riscv: dts: starfive: DeepComputing FML13V01 binman config   Heinrich Schuchardt
      • [PATCH 2/6] riscv: dts: starfive: DeepComputing FML13V01 binman config   E Shattow
    • [PATCH 2/6] riscv: dts: starfive: DeepComputing FML13V01 binman config   Simon Glass
      • [PATCH 2/6] riscv: dts: starfive: DeepComputing FML13V01 binman config   Heinrich Schuchardt
      • [PATCH 2/6] riscv: dts: starfive: DeepComputing FML13V01 binman config   Simon Glass
  • [PATCH 3/6] riscv: dts: jh7110: add DeepComputing FML13V01 device-tree   Heinrich Schuchardt
    • [PATCH 3/6] riscv: dts: jh7110: add DeepComputing FML13V01 device-tree   Sumit Garg
    • [PATCH 3/6] riscv: dts: jh7110: add DeepComputing FML13V01 device-tree   Hal Feng
  • [PATCH 4/6] board: starfive: DeepComputing FML13V01 fdt selection   Heinrich Schuchardt
    • [PATCH 4/6] board: starfive: DeepComputing FML13V01 fdt selection   Hal Feng
• [PATCH 1/6] configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig   Heinrich Schuchardt
  • [PATCH 1/6] configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig   Sumit Garg
  • [PATCH 1/6] configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig   Hal Feng
• [PATCH 5/6] board: starfive: spl: support DeepComputing FML13V01   Heinrich Schuchardt
• [PATCH 6/6] doc: add DeepComputing FML13V01 documentation   Heinrich Schuchardt
  • [PATCH 6/6] doc: add DeepComputing FML13V01 documentation   Heinrich Schuchardt
• Help needed: How to Specify MTD Partitions on NAND in a Device Tree   Mauri Sandberg
  • Help needed: How to Specify MTD Partitions on NAND in a Device Tree   Weijie Gao
    • Help needed: How to Specify MTD Partitions on NAND in a Device Tree   Mauri Sandberg
      • Help needed: How to Specify MTD Partitions on NAND in a Device Tree   Mauri Sandberg
      • Help needed: How to Specify MTD Partitions on NAND in a Device Tree   Weijie Gao
• [PATCH v2 00/29] test: Complete the suite migration   Simon Glass
  • [PATCH v2 01/29] test: Drop sandbox_set_enable_memio() from mux-cmd test   Simon Glass
  • [PATCH v2 02/29] test: Fix a stray asterisk in ut_run_list()   Simon Glass
  • [PATCH v2 03/29] test: Add up the number of tests manually   Simon Glass
  • [PATCH v2 04/29] test: Keep track of suite duration   Simon Glass
  • [PATCH v2 05/29] test: Show the average time per test   Simon Glass
  • [PATCH v2 06/29] test: Leave out the prefix when printing test names   Simon Glass
  • [PATCH v2 07/29] test: Support an init/uninit functions for test suites   Simon Glass
  • [PATCH v2 08/29] test: Tweak FDT-overlay tests   Simon Glass
  • [PATCH v2 09/29] test: Move env-test rule into test/   Simon Glass
  • [PATCH v2 10/29] test: Move optee-test rule into test/   Simon Glass
  • [PATCH v2 11/29] test: Move fdt-overlay-test rule into test/   Simon Glass
  • [PATCH v2 12/29] test: Make all tests depend on UNIT_TEST   Simon Glass
  • [PATCH v2 13/29] test: Move fdt_overlay init into a function   Simon Glass
  • [PATCH v2 14/29] test: Update fdt_overlay test to use fdtdec functions   Simon Glass
  • [PATCH v2 15/29] test: Update fdt_overlay to do init from tests   Simon Glass
  • [PATCH v2 16/29] test: Drop the function for running fdt_overlay tests   Simon Glass
  • [PATCH v2 17/29] test: Update bootstd to do init from tests   Simon Glass
  • [PATCH v2 18/29] test: Drop the function for running bootstd tests   Simon Glass
  • [PATCH v2 19/29] test: Update optee to do init and uninit from tests   Simon Glass
  • [PATCH v2 20/29] test: Split optee tests into three functions   Simon Glass
  • [PATCH v2 21/29] test: Drop the function for running optee tests   Simon Glass
  • [PATCH v2 22/29] test: Rename optee test-file   Simon Glass
  • [PATCH v2 23/29] test: Drop support for test commands   Simon Glass
  • [PATCH v2 24/29] test: Make cmd_ut_category() static   Simon Glass
  • [PATCH v2 25/29] test: Drop suites.h   Simon Glass
  • [PATCH v2 26/29] test: Allow running a selection of suites   Simon Glass
  • [PATCH v2 27/29] test: Move code out of cmd_ut_category()   Simon Glass
  • [PATCH v2 28/29] test: Do flag-processing in the correct place   Simon Glass
  • [PATCH v2 29/29] test: Update documentation   Simon Glass
  • [PATCH v2 00/29] test: Complete the suite migration   Tom Rini
• [PATCH] Azure: Add missing "set -e" to docs job   Tom Rini
  • [PATCH] Azure: Add missing "set -e" to docs job   Tom Rini
• [PATCH v4 0/2] led: add function naming option from linux   Tom Rini
• [PATCH 1/3] bootstd: Fix memleak on errors in bootmeth_setup_iter_order()   Sam Protsenko
  • [PATCH 1/3] bootstd: Fix memleak on errors in bootmeth_setup_iter_order()   Sam Protsenko
    • [PATCH 1/3] bootstd: Fix memleak on errors in bootmeth_setup_iter_order()   Simon Glass
• [PATCH 0/2] Remove "saveenv" functionality from am57xx evms   Anurag Dutta
  • [PATCH 1/2] configs: am57xx_hs: Remove saved environments   Anurag Dutta
  • [PATCH 2/2] configs: am57xx: Remove saved environments   Anurag Dutta
  • [PATCH 0/2] Remove "saveenv" functionality from am57xx evms   Tom Rini
    • [PATCH 0/2] Remove "saveenv" functionality from am57xx evms   Kumar, Udit
      • [PATCH 0/2] Remove "saveenv" functionality from am57xx evms   Tom Rini
      • [PATCH 0/2] Remove "saveenv" functionality from am57xx evms   Kumar, Udit
  • [PATCH 0/2] Remove "saveenv" functionality from am57xx evms   Tom Rini
• [PATCH v4 05/12] power-domain: Add refcounting   Fabio Estevam
• [PATCH] configs: clearfog,helios4: disable sdhci sdma   Josua Mayer
• [PATCH v2] configs: clearfog,helios4: disable sdhci sdma   Josua Mayer
  • [PATCH v2] configs: clearfog,helios4: disable sdhci sdma   Stefan Roese
    • [PATCH v2] configs: clearfog,helios4: disable sdhci sdma   Josua Mayer
• [PATCH] CI: Use different git-directory for each runner   Simon Glass
  • [PATCH] CI: Use different git-directory for each runner   Tom Rini
• [PATCH v2 00/29] arm: Support building as an EFI app   Simon Glass
  • [PATCH v2 00/29] arm: Support building as an EFI app   Tom Rini
    • [PATCH v2 00/29] arm: Support building as an EFI app   Simon Glass
      • [PATCH v2 00/29] arm: Support building as an EFI app   Tom Rini
      • [PATCH v2 00/29] arm: Support building as an EFI app   Simon Glass
      • [PATCH v2 00/29] arm: Support building as an EFI app   Simon Glass
      • [PATCH v2 00/29] arm: Support building as an EFI app   Simon Glass
• [PATCH v2 01/29] Makefile: Avoid using TEXT_BASE if not present   Simon Glass
  • [PATCH v2 01/29] Makefile: Avoid using TEXT_BASE if not present   Tom Rini
    • [PATCH v2 01/29] Makefile: Avoid using TEXT_BASE if not present   Simon Glass
      • [PATCH v2 01/29] Makefile: Avoid using TEXT_BASE if not present   Tom Rini
      • [PATCH v2 01/29] Makefile: Avoid using TEXT_BASE if not present   Simon Glass
• [PATCH v2 02/29] video: Move vesa_setup_video_priv() into its own file   Simon Glass
• [PATCH v2 03/29] video: Use a local mode_info struct in the EFI driver   Simon Glass
• [PATCH v2 04/29] lib: Provide fdtdec_get_pci_bar32() only with PCI enabled   Simon Glass
• [PATCH v2 05/29] efi: Rename app and payload to include x86   Simon Glass
• [PATCH v2 06/29] efi: Allow board/efi Kconfig to be used outside x86   Simon Glass
• [PATCH v2 07/29] efi: x86: Move EFI SDRAM-handling into a common file   Simon Glass
• [PATCH v2 08/29] treewide: Rename VENDOR_EFI to ARCH_EFI   Simon Glass
• [PATCH v2 09/29] efi: x86: Rework VENDOR_EFI option to permit other archs   Simon Glass
• [PATCH v2 10/29] efi: x86: Allow setting the global_data pointer with EFI   Simon Glass
• [PATCH v2 11/29] efi: Tidy up setup of global_data   Simon Glass
• [PATCH v2 12/29] efi: Rename ImageBase to image_base   Simon Glass
• [PATCH v2 13/29] efi: lmb: Avoid access to _start   Simon Glass
• [PATCH v2 14/29] efi: arm: Don't do the EL2 switch when running under EFI   Simon Glass
• [PATCH v2 15/29] efi: arm: Avoid allocating page tables when running under EFI   Simon Glass
• [PATCH v2 16/29] efi: arm: Avoid enabling caches when running under EFI   Simon Glass
• [PATCH v2 17/29] efi: arm: Implement access to global_data for EFI   Simon Glass
  • [PATCH v2 17/29] efi: arm: Implement access to global_data for EFI   Tom Rini
• [PATCH v2 18/29] efi: arm: Omit the ARM start-up code in the EFI app   Simon Glass
• [PATCH v2 19/29] efi: arm: Drop exception code when running as an EFI app   Simon Glass
• [PATCH v2 20/29] efi: arm: x86: Allow use of the EFI table in the app   Simon Glass
• [PATCH v2 21/29] efi: arm: Disable --gc-sections for the app   Simon Glass
• [PATCH v2 22/29] efi: arm: Drop startup code from the app   Simon Glass
• [PATCH v2 23/29] efi: arm: Adjust how the monitor length is calculated   Simon Glass
  • [PATCH v2 23/29] efi: arm: Adjust how the monitor length is calculated   Tom Rini
• [PATCH v2 24/29] efi: arm: Provide startup and relocation code   Simon Glass
• [PATCH v2 25/29] efi: Generate the app as a shared library   Simon Glass
  • [PATCH v2 25/29] efi: Generate the app as a shared library   Tom Rini
    • [PATCH v2 25/29] efi: Generate the app as a shared library   Simon Glass
      • [PATCH v2 25/29] efi: Generate the app as a shared library   Tom Rini
• [PATCH v2 26/29] efi: arm: Disable STATIC_RELA for the EFI app   Simon Glass
  • [PATCH v2 26/29] efi: arm: Disable STATIC_RELA for the EFI app   Tom Rini
• [PATCH v2 27/29] efi: arm: Use EFI flags for all compilation with the app   Simon Glass
• [PATCH v2 28/29] efi: arm: Simplify the crt0 file and update link script   Simon Glass
• [PATCH v2 29/29] efi: arm: Add an EFI app for arm64   Simon Glass
• [PATCH 0/3] rockchip: rk3399-gru: Fix missing TPL and SPL banner on debug UART   Jonas Karlman
  • [PATCH 2/3] rockchip: rk3399-gru: Enable TPL_GPIO for bob and kevin   Jonas Karlman
    • [PATCH 2/3] rockchip: rk3399-gru: Enable TPL_GPIO for bob and kevin   Kever Yang
  • [PATCH 3/3] Revert "rockchip: rk3399: Fix TPL build of bob and kevin"   Jonas Karlman
    • [PATCH 3/3] Revert "rockchip: rk3399: Fix TPL build of bob and kevin"   Kever Yang
  • [PATCH 0/3] rockchip: rk3399-gru: Fix missing TPL and SPL banner on debug UART   Simon Glass
    • [PATCH 0/3] rockchip: rk3399-gru: Fix missing TPL and SPL banner on debug UART   Tom Rini
      • [PATCH 0/3] rockchip: rk3399-gru: Fix missing TPL and SPL banner on debug UART   Jonas Karlman
• [PATCH 1/3] Revert "rockchip: rk3399: Drop unneeded bob and kevin board specific code"   Jonas Karlman
  • [PATCH 1/3] Revert "rockchip: rk3399: Drop unneeded bob and kevin board specific code"   Kever Yang
• [PATCH 02/12] rockchip: rk3399-gru: Use SYS_SPI_U_BOOT_OFFS value in offset prop   Simon Glass
  • [PATCH 02/12] rockchip: rk3399-gru: Use SYS_SPI_U_BOOT_OFFS value in offset prop   Jonas Karlman
    • [PATCH 02/12] rockchip: rk3399-gru: Use SYS_SPI_U_BOOT_OFFS value in offset prop   Simon Glass
• [PATCH v3 00/29] arm: Support building as an EFI app   Simon Glass
• [PATCH v3 01/29] Makefile: Avoid using TEXT_BASE if not present   Simon Glass
• [PATCH v3 02/29] video: Move vesa_setup_video_priv() into its own file   Simon Glass
  • [PATCH v3 02/29] video: Move vesa_setup_video_priv() into its own file   Tom Rini
• [PATCH v3 03/29] video: Use a local mode_info struct in the EFI driver   Simon Glass
  • [PATCH v3 03/29] video: Use a local mode_info struct in the EFI driver   Caleb Connolly
• [PATCH v3 04/29] lib: Provide fdtdec_get_pci_bar32() only with PCI enabled   Simon Glass
• [PATCH v3 05/29] efi: Rename app and payload to include x86   Simon Glass
• [PATCH v3 06/29] efi: Allow board/efi Kconfig to be used outside x86   Simon Glass
• [PATCH v3 07/29] efi: x86: Move EFI SDRAM-handling into a common file   Simon Glass
• [PATCH v3 08/29] treewide: Rename VENDOR_EFI to ARCH_EFI   Simon Glass
  • [PATCH v3 08/29] treewide: Rename VENDOR_EFI to ARCH_EFI   Tom Rini
• [PATCH v3 09/29] efi: x86: Rework VENDOR_EFI option to permit other archs   Simon Glass
  • [PATCH v3 09/29] efi: x86: Rework VENDOR_EFI option to permit other archs   Tom Rini
• [PATCH v3 10/29] efi: x86: Allow setting the global_data pointer with EFI   Simon Glass
• [PATCH v3 11/29] efi: Tidy up setup of global_data   Simon Glass
• [PATCH v3 12/29] efi: Rename ImageBase to image_base   Simon Glass
  • [PATCH v3 12/29] efi: Rename ImageBase to image_base   Tom Rini
• [PATCH v3 13/29] efi: lmb: Avoid access to _start   Simon Glass
• [PATCH v3 14/29] efi: arm: Don't do the EL2 switch when running under EFI   Simon Glass
• [PATCH v3 15/29] efi: arm: Avoid allocating page tables when running under EFI   Simon Glass
• [PATCH v3 16/29] efi: arm: Avoid enabling caches when running under EFI   Simon Glass
• [PATCH v3 17/29] efi: arm: Implement access to global_data for EFI   Simon Glass
  • [PATCH v3 17/29] efi: arm: Implement access to global_data for EFI   Tom Rini
• [PATCH v3 18/29] efi: arm: Omit the ARM start-up code in the EFI app   Simon Glass
• [PATCH v3 19/29] efi: arm: Drop exception-level code when running as EFI app   Simon Glass
  • [PATCH v3 19/29] efi: arm: Drop exception-level code when running as EFI app   Tom Rini
• [PATCH v3 20/29] efi: arm: x86: Allow use of the EFI table in the app   Simon Glass
• [PATCH v3 21/29] efi: arm: Disable --gc-sections for the app   Simon Glass
• [PATCH v3 22/29] efi: arm: Drop startup code from the app   Simon Glass
• [PATCH v3 23/29] efi: arm: Adjust how the monitor length is calculated   Simon Glass
  • [PATCH v3 23/29] efi: arm: Adjust how the monitor length is calculated   Tom Rini
• [PATCH v3 24/29] efi: arm: Provide startup and relocation code   Simon Glass
• [PATCH v3 25/29] efi: Generate the app as a shared library   Simon Glass
• [PATCH v3 26/29] efi: arm: Disable STATIC_RELA for the EFI app   Simon Glass
  • [PATCH v3 26/29] efi: arm: Disable STATIC_RELA for the EFI app   Tom Rini
• 回复：[PATCH v1] linker_lists:Update the alignment using CONFIG_LINKER_LIST_ALIGN   黄利亚
• [PATCH 0/2] boot: improve error handling fit_find_config_node   Heinrich Schuchardt
  • [PATCH 1/2] boot: continue in fit_find_config_node()   Heinrich Schuchardt
    • [PATCH 1/2] boot: continue in fit_find_config_node()   Simon Glass
      • [PATCH 1/2] boot: continue in fit_find_config_node()   Heinrich Schuchardt
      • [PATCH 1/2] boot: continue in fit_find_config_node()   Simon Glass
      • [PATCH 1/2] boot: continue in fit_find_config_node()   Heinrich Schuchardt
      • [PATCH 1/2] boot: continue in fit_find_config_node()   Simon Glass
      • [PATCH 1/2] boot: continue in fit_find_config_node()   Heinrich Schuchardt
      • [PATCH 1/2] boot: continue in fit_find_config_node()   Simon Glass
• [PATCH 2/2] boot: correct error message in fit_find_config_node()   Heinrich Schuchardt
• [PATCH v2 01/24] net: ravb: Drop empty init callback   Marek Vasut
  • [PATCH v2 02/24] net: sh_eth: Drop empty init callback   Marek Vasut
    • [PATCH v2 02/24] net: sh_eth: Drop empty init callback   Paul Barker
  • [PATCH v2 03/24] net: designware: Drop NULL priv assignment   Marek Vasut
    • [PATCH v2 03/24] net: designware: Drop NULL priv assignment   Paul Barker
  • [PATCH v2 04/24] net: ravb: Reorder bb_miiphy functions   Marek Vasut
    • [PATCH v2 04/24] net: ravb: Reorder bb_miiphy functions   Paul Barker
  • [PATCH v2 05/24] net: sh_eth: Reorder bb_miiphy functions   Marek Vasut
  • [PATCH v2 06/24] arm: mvebu: a38x: Reorder bb_miiphy functions   Marek Vasut
  • [PATCH v2 07/24] net: designware: Reorder bb_miiphy functions   Marek Vasut
  • [PATCH v2 08/24] arm: mvebu: a38x: Call bb_miiphy init directly in driver probe   Marek Vasut
  • [PATCH v2 09/24] net: miiphybb: Drop bb_miiphy_init()   Marek Vasut
    • [PATCH v2 09/24] net: miiphybb: Drop bb_miiphy_init()   Paul Barker
  • [PATCH v2 10/24] net: miiphybb: Drop .init callback   Marek Vasut
    • [PATCH v2 10/24] net: miiphybb: Drop .init callback   Paul Barker
  • [PATCH v2 11/24] net: designware: Drop bus index   Marek Vasut
  • [PATCH v2 12/24] net: designware: Extract bbmiiphy initialization into dedicated function   Marek Vasut
  • [PATCH v2 13/24] miiphy: Introduce mdio_init()   Marek Vasut
    • [PATCH v2 13/24] miiphy: Introduce mdio_init()   Paul Barker
      • [PATCH v2 13/24] miiphy: Introduce mdio_init()   Paul Barker
  • [PATCH v2 14/24] net: miiphybb: Introduce bb_miiphy_alloc()/bb_miiphy_free() wrappers   Marek Vasut
    • [PATCH v2 14/24] net: miiphybb: Introduce bb_miiphy_alloc()/bb_miiphy_free() wrappers   Paul Barker
  • [PATCH v2 15/24] arm: mvebu: a38x: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
  • [PATCH v2 16/24] net: ravb: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
    • [PATCH v2 16/24] net: ravb: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Paul Barker
      • [PATCH v2 16/24] net: ravb: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
  • [PATCH v2 17/24] net: sh_eth: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
  • [PATCH v2 18/24] net: designware: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
  • [PATCH v2 19/24] net: miiphybb: Use container_of() in bb_miiphy_getbus()   Marek Vasut
    • [PATCH v2 19/24] net: miiphybb: Use container_of() in bb_miiphy_getbus()   Paul Barker
  • [PATCH v2 20/24] net: miiphybb: Drop name field from struct bb_miiphy_bus   Marek Vasut
    • [PATCH v2 20/24] net: miiphybb: Drop name field from struct bb_miiphy_bus   Paul Barker
  • [PATCH v2 21/24] arm: mvebu: a38x: Drop use of miiphy_get_dev_by_name()   Marek Vasut
  • [PATCH v2 22/24] net: ravb: Drop use of miiphy_get_dev_by_name()   Marek Vasut
    • [PATCH v2 22/24] net: ravb: Drop use of miiphy_get_dev_by_name()   Paul Barker
  • [PATCH v2 23/24] net: sh_eth: Drop use of miiphy_get_dev_by_name()   Marek Vasut
  • [PATCH v2 24/24] net: miiphybb: Drop bb_miiphy_buses and bb_miiphy_buses_num   Marek Vasut
    • [PATCH v2 24/24] net: miiphybb: Drop bb_miiphy_buses and bb_miiphy_buses_num   Paul Barker
  • [PATCH v2 01/24] net: ravb: Drop empty init callback   Peter Robinson
  • [PATCH v2 01/24] net: ravb: Drop empty init callback   Paul Barker
• [PATCH 06/12] rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom image   Simon Glass
  • [PATCH 06/12] rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom image   Tom Rini
    • [PATCH 06/12] rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom image   Simon Glass
      • [PATCH 06/12] rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom image   Jonas Karlman
      • [PATCH 06/12] rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom image   Tom Rini
      • [PATCH 06/12] rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom image   Tom Rini
      • [PATCH 06/12] rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom image   Simon Glass
• [PATCH] configs: Migrate CONFIG_BOOTCOUNT_ALTBOOTCMD to defconfig   Tom Rini
• [PATCH] u-boot-initial-env: Add missing dependencies   Tom Rini
  • [PATCH] u-boot-initial-env: Add missing dependencies   Tom Rini
• [PATCH] tools: Fix handle leak in mmap_fdt function   Maks Mishin
  • [PATCH] tools: Fix handle leak in mmap_fdt function   Tom Rini
• [PATCH] ARM: renesas: Enable USBHS UDC and UMS on Renesas R-Car Gen3 Salvator-X(S)   Marek Vasut
• [PATCH 0/4] riscv: dts: starfive: simplify binman config   Heinrich Schuchardt
  • [PATCH 1/4] riscv: dts: add OF_LIST handling to binman.dtsi   Heinrich Schuchardt
    • [PATCH 1/4] riscv: dts: add OF_LIST handling to binman.dtsi   Simon Glass
  • [PATCH 2/4] board: starfive: spl: strip off 'starfive/' prefix   Heinrich Schuchardt
  • [PATCH 3/4] riscv: dts: starfive: remove duplicate itb entries   Heinrich Schuchardt
    • [PATCH 3/4] riscv: dts: starfive: remove duplicate itb entries   Simon Glass
  • [PATCH 4/4] configs: starfive: default to jh7110-starfive-visionfive-2-v1.3b   Heinrich Schuchardt
    • [PATCH 4/4] configs: starfive: default to jh7110-starfive-visionfive-2-v1.3b   E Shattow
      • [PATCH 4/4] configs: starfive: default to jh7110-starfive-visionfive-2-v1.3b   E Shattow
      • [PATCH 4/4] configs: starfive: default to jh7110-starfive-visionfive-2-v1.3b   E Shattow
• [PATCH] tools: Fix potential null-deref with result of strtok_r   Maks Mishin
  • [PATCH] tools: Fix potential null-deref with result of strtok_r   Tom Rini
• [PATCH v2 0/6] test: A few quality-of-life improvements   Simon Glass
  • [PATCH v2 1/6] test/py: Shorten u_boot_console   Simon Glass
  • [PATCH v2 4/6] test/py: Drop assigning ubman to cons   Simon Glass
  • [PATCH v2 0/6] test: A few quality-of-life improvements   Tom Rini
• [PATCH v2 2/6] test/py: Drop u_boot_ prefix on test files   Simon Glass
  • [PATCH v2 2/6] test/py: Drop u_boot_ prefix on test files   Mattijs Korpershoek
• [PATCH v2 3/6] test/py: Drop importing utils as util   Simon Glass
  • [PATCH v2 3/6] test/py: Drop importing utils as util   Mattijs Korpershoek
• [PATCH v2 5/6] test/py: Show info about module-loading   Simon Glass
  • [PATCH v2 5/6] test/py: Show info about module-loading   Tom Rini
    • [PATCH v2 5/6] test/py: Show info about module-loading   Simon Glass
      • [PATCH v2 5/6] test/py: Show info about module-loading   Tom Rini
      • [PATCH v2 5/6] test/py: Show info about module-loading   Simon Glass
      • [PATCH v2 5/6] test/py: Show info about module-loading   Tom Rini
• [PATCH v2 6/6] test: Make net tests depend on CONFIG_CMD_NET   Simon Glass
• [PATCH 0/3] arm: mvebu: add solidrun cn913x based boards   Josua Mayer
  • [PATCH 1/3] u-boot: drivers: marvell: rtc: adding rtc driver   Josua Mayer
    • [PATCH 1/3] u-boot: drivers: marvell: rtc: adding rtc driver   Stefan Roese
• [PATCH 2/3] mvebu: armada-8k: set fdtfile env from DEFAULT_FDT_FILE   Josua Mayer
  • [PATCH 2/3] mvebu: armada-8k: set fdtfile env from DEFAULT_FDT_FILE   Stefan Roese
• [PATCH 3/3] board: solidrun: add cn9130 based boards   Josua Mayer
  • [PATCH 3/3] board: solidrun: add cn9130 based boards   Stefan Roese
• [PATCH v2 00/35] VBE serial part H: Implement VBE on Rockchip RK3399   Simon Glass
  • [PATCH v2 02/35] spl: Add an SPL_HAVE_INIT_STACK option   Simon Glass
    • [PATCH v2 02/35] spl: Add an SPL_HAVE_INIT_STACK option   Jonas Karlman
      • [PATCH v2 02/35] spl: Add an SPL_HAVE_INIT_STACK option   Simon Glass
  • [PATCH v2 30/35] rockchip: Set the skip-at-start property correctly   Simon Glass
    • [PATCH v2 30/35] rockchip: Set the skip-at-start property correctly   Jonas Karlman
      • [PATCH v2 30/35] rockchip: Set the skip-at-start property correctly   Simon Glass
• [PATCH v2 01/35] tpl: Rename TPL_NEEDS_SEPARATE_STACK to TPL_HAVE_INIT_STACK   Simon Glass
  • [PATCH v2 01/35] tpl: Rename TPL_NEEDS_SEPARATE_STACK to TPL_HAVE_INIT_STACK   Jonas Karlman
    • [PATCH v2 01/35] tpl: Rename TPL_NEEDS_SEPARATE_STACK to TPL_HAVE_INIT_STACK   Simon Glass
• [PATCH v2 03/35] spl: Use CONFIG_VAL() to obtain the SPL stack   Simon Glass
  • [PATCH v2 03/35] spl: Use CONFIG_VAL() to obtain the SPL stack   Tom Rini
  • [PATCH v2 03/35] spl: Use CONFIG_VAL() to obtain the SPL stack   Jonas Karlman
    • [PATCH v2 03/35] spl: Use CONFIG_VAL() to obtain the SPL stack   Simon Glass
• [PATCH v2 04/35] arm: Support a separate stack for VPL   Simon Glass
  • [PATCH v2 04/35] arm: Support a separate stack for VPL   Jonas Karlman
    • [PATCH v2 04/35] arm: Support a separate stack for VPL   Simon Glass
• [PATCH v2 05/35] spl: Adjust xPL symbols   Simon Glass
• [PATCH v2 06/35] spl: Allow VBE to handle xPL size   Simon Glass
• [PATCH v2 07/35] vbe: Show the margin when using SPL_RELOC   Simon Glass
• [PATCH v2 08/35] rockchip: Allow RAM init to happen in SPL on rk3399   Simon Glass
• [PATCH v2 09/35] rockchip: dts: Correct the OS for U-Boot   Simon Glass
• [PATCH v2 10/35] rockchip: dts: Factor out arch and compression   Simon Glass
• [PATCH v2 11/35] rockchip: dts: Add an fdtmap   Simon Glass
  • [PATCH v2 11/35] rockchip: dts: Add an fdtmap   Jonas Karlman
• [PATCH v2 12/35] rockchip: dts: Create a template for the FIT   Simon Glass
  • [PATCH v2 12/35] rockchip: dts: Create a template for the FIT   Jonas Karlman
    • [PATCH v2 12/35] rockchip: dts: Create a template for the FIT   Simon Glass
• [PATCH v2 13/35] rockchip: dts: Un-indent the FIT template   Simon Glass
  • [PATCH v2 13/35] rockchip: dts: Un-indent the FIT template   Jonas Karlman
• [PATCH v2 14/35] rockchip: dts: Use the new binman template for the SPI image too   Simon Glass
  • [PATCH v2 14/35] rockchip: dts: Use the new binman template for the SPI image too   Jonas Karlman
    • [PATCH v2 14/35] rockchip: dts: Use the new binman template for the SPI image too   Simon Glass
      • [PATCH v2 14/35] rockchip: dts: Use the new binman template for the SPI image too   Jonas Karlman
• [PATCH v2 15/35] rockchip: dts: Specify the phase in the image   Simon Glass
• [PATCH v2 16/35] rockchip: Provide a bootstd configuration   Simon Glass
  • [PATCH v2 16/35] rockchip: Provide a bootstd configuration   Jonas Karlman
    • [PATCH v2 16/35] rockchip: Provide a bootstd configuration   Simon Glass
• [PATCH v2 17/35] rockchip: Add SPL into the main FIT   Simon Glass
• [PATCH v2 18/35] rockchip: Include a compatible string in each configuration   Simon Glass
  • [PATCH v2 18/35] rockchip: Include a compatible string in each configuration   Jonas Karlman
• [PATCH v2 19/35] rockchip: Add a template for SPL   Simon Glass
  • [PATCH v2 19/35] rockchip: Add a template for SPL   Jonas Karlman
• [PATCH v2 20/35] rockchip: Add a VPL image   Simon Glass
• [PATCH v2 21/35] rockchip: Add TPL alternatives   Simon Glass
• [PATCH v2 22/35] rockchip: Update rk3399 bootph-tags for VPL   Simon Glass
• [PATCH v2 23/35] rockchip: Provide a VPL phase on rk3399   Simon Glass
• [PATCH v2 24/35] rockchip: Add symbols for spl_reloc   Simon Glass
• [PATCH v2 25/35] rockchip: rk3399: Adjust initial TPL-stack to match SPL   Simon Glass
• [PATCH v2 26/35] rockchip: Allow SPL to set up SDRAM   Simon Glass
• [PATCH v2 27/35] rockchip: Add a generic-ddr3 rk3399 board   Simon Glass
• [PATCH v2 28/35] rockchip: Add documentation for VBE   Simon Glass
• [PATCH v2 29/35] gitlab: Add an VBE board to the sjg lab   Simon Glass
• [PATCH v2 31/35] vbe: Add a bootmeth driver for abrec   Simon Glass
• [PATCH v2 32/35] rockchip: Update binman image for new skip-at-start setup   Simon Glass
• [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
  • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
    • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
      • [PATCH v2 33/35] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
• [PATCH v2 34/35] rockchip: Relocate bloblist at the end of the SPL phase   Simon Glass
• [PATCH v2 35/35] bloblist: Allow using a different bloblist address   Simon Glass
  • [PATCH v2 35/35] bloblist: Allow using a different bloblist address   Tom Rini
    • [PATCH v2 35/35] bloblist: Allow using a different bloblist address   Simon Glass
      • [PATCH v2 35/35] bloblist: Allow using a different bloblist address   Tom Rini
      • [PATCH v2 35/35] bloblist: Allow using a different bloblist address   Simon Glass
      • [PATCH v2 35/35] bloblist: Allow using a different bloblist address   Tom Rini
      • [PATCH v2 35/35] bloblist: Allow using a different bloblist address   Simon Glass
      • [PATCH v2 35/35] bloblist: Allow using a different bloblist address   Tom Rini
      • [PATCH v2 35/35] bloblist: Allow using a different bloblist address   Simon Glass
• [PATCH 1/2] u_boot_pylib: Move gitutil into the library   Simon Glass
  • [PATCH 2/2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Simon Glass
    • [PATCH 2/2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Tom Rini
  • (subset) [PATCH 1/2] u_boot_pylib: Move gitutil into the library   Tom Rini
• [PATCH 0/2] net: dwc_eth_qos_rockchip: Fix disable of delay for RK356x and RK3588   Jonas Karlman
  • [PATCH 1/2] net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK356x   Jonas Karlman
    • [PATCH 1/2] net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK356x   Quentin Schulz
      • [PATCH 1/2] net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK356x   Jonas Karlman
      • [PATCH 1/2] net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK356x   Quentin Schulz
    • [PATCH 1/2] net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK356x   Kever Yang
  • [PATCH 2/2] net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK3588   Jonas Karlman
    • [PATCH 2/2] net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK3588   Kever Yang
• [PATCH] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Marek Vasut
  • [PATCH] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Quentin Schulz
• [PATCH] ARM: dts: stm32: Add support for environment in eMMC on STM32MP13xx DHCOR SoM   Marek Vasut
• [PATCH v3] board: nuvoton: use an event to replace last_stage_init()   Michael Chang
  • [PATCH v3] board: nuvoton: use an event to replace last_stage_init()   Tom Rini
• [PATCH v3] board: starfive: Update the maintainer file for VisionFive 2 board   Hal Feng
  • [PATCH v3] board: starfive: Update the maintainer file for VisionFive 2 board   Leo Liang
• Please pull u-boot-samsung master   Minkyu Kang
  • Please pull u-boot-samsung master   Tom Rini
• [PATCH v3 0/7] Align pio3 pinctrl node with Linux   Manikandan Muralidharan
  • [PATCH v3 1/7] ARM: dts: at91: sam9x60: Add AIC node   Manikandan Muralidharan
  • [PATCH v3 2/7] ARM: dts: at91: sam9x60: Define pinctrl node with its label   Manikandan Muralidharan
  • [PATCH v3 3/7] ARM: dts: at91: sam9x60: Move pinmux node to board DTS   Manikandan Muralidharan
  • [PATCH v3 7/7] ARM: dts: at91: Align pinctrl node with Linux Devicetree   Manikandan Muralidharan
  • [PATCH v3 0/7] Align pio3 pinctrl node with Linux   Eugen Hristev
• [PATCH v3 4/7] ARM: dts: at91: sam9x60: Add missing pinctrl node properties   Manikandan Muralidharan
• [PATCH v3 5/7] pinctrl: at91: Bind GPIO driver to the pinctrl DT node   Manikandan Muralidharan
• [PATCH v3 6/7] pinctrl: at91: Add support to align with Linux Devicetree   Manikandan Muralidharan
• [PATCH v1] board: verdin-am62: add dram_init_banksize   Stefan Eichenberger
  • [PATCH v1] board: verdin-am62: add dram_init_banksize   Francesco Dolcini
  • [PATCH v1] board: verdin-am62: add dram_init_banksize   Tom Rini
    • [PATCH v1] board: verdin-am62: add dram_init_banksize   Francesco Dolcini
      • [PATCH v1] board: verdin-am62: add dram_init_banksize   Tom Rini
  • [PATCH v1] board: verdin-am62: add dram_init_banksize   Tom Rini
• [PATCH 1/2] arch: arm: dts: k3-am625-phycore-som-binman: Add custMpk to all images   Daniel Schultz
  • [PATCH 2/2] arch: arm: dts: k3-am642-phycore-som-binman: Add custMpk to all images   Daniel Schultz
  • [PATCH 1/2] arch: arm: dts: k3-am625-phycore-som-binman: Add custMpk to all images   Wadim Egorov
• [PATCH v2] usb: gadget: f_mass_storage: Add schedule() in sleep_thread()   Patrice CHOTARD
  • [PATCH v2] usb: gadget: f_mass_storage: Add schedule() in sleep_thread()   Marek Vasut
    • [PATCH v2] usb: gadget: f_mass_storage: Add schedule() in sleep_thread()   Mattijs Korpershoek
      • [PATCH v2] usb: gadget: f_mass_storage: Add schedule() in sleep_thread()   Patrice CHOTARD
  • [PATCH v2] usb: gadget: f_mass_storage: Add schedule() in sleep_thread()   Mattijs Korpershoek
• [PATCH v5 0/9] Restore USB and add UMS support for STiH407-B2260   Patrice CHOTARD
  • [PATCH v5 0/9] Restore USB and add UMS support for STiH407-B2260   Marek Vasut
    • [PATCH v5 0/9] Restore USB and add UMS support for STiH407-B2260   Mattijs Korpershoek
      • [PATCH v5 0/9] Restore USB and add UMS support for STiH407-B2260   Patrice CHOTARD
  • [PATCH v5 0/9] Restore USB and add UMS support for STiH407-B2260   Mattijs Korpershoek
• [PATCH v2 0/4] riscv: dts: starfive: simplify binman config   Heinrich Schuchardt
  • [PATCH v2 1/4] riscv: dts: add OF_LIST handling to binman.dtsi   Heinrich Schuchardt
  • [PATCH v2 2/4] board: starfive: spl: strip off 'starfive/' prefix   Heinrich Schuchardt
    • [PATCH v2 2/4] board: starfive: spl: strip off 'starfive/' prefix   Leo Liang
  • [PATCH v2 3/4] riscv: dts: starfive: remove duplicate itb entries   Heinrich Schuchardt
  • [PATCH v2 4/4] riscv: dts: starfive: don't use a default configuration   Heinrich Schuchardt
    • [PATCH v2 4/4] riscv: dts: starfive: don't use a default configuration   Simon Glass
      • [PATCH v2 4/4] riscv: dts: starfive: don't use a default configuration   Heinrich Schuchardt
  • [PATCH v2 0/4] riscv: dts: starfive: simplify binman config   Hal Feng
• [PATCH v4 0/7] AM62,AM62-LP,AM62A,AM62P,J722S: USB DFU and UMS   Siddharth Vadapalli
  • [PATCH v4 1/7] configs: am62ax_evm_a53_defconfig: enable USB DFU support   Siddharth Vadapalli
  • [PATCH v4 2/7] board: ti: am62px: env: include environment for DFU Boot   Siddharth Vadapalli
  • [PATCH v4 3/7] configs: am62x_r5_usbdfu: extend for AM62Px   Siddharth Vadapalli
  • [PATCH v4 4/7] configs: am62px_evm_a53_defconfig: enable USB DFU support   Siddharth Vadapalli
  • [PATCH v4 5/7] board: ti: j722s: env: include environment for DFU   Siddharth Vadapalli
  • [PATCH v4 6/7] configs: j722s_evm_a53_defconfig: enable USB DFU support   Siddharth Vadapalli
  • [PATCH v4 7/7] configs: am62x_a53_usbdfu: enable USB MASS Storage command   Siddharth Vadapalli
  • [PATCH v4 0/7] AM62,AM62-LP,AM62A,AM62P,J722S: USB DFU and UMS   Tom Rini
• [PATCH v3 0/3] Add support for USB DFU boot on AM62Px   Siddharth Vadapalli
• [PATCH] configs: am62ax_evm_a53_defconfig: enable USB DFU support   Siddharth Vadapalli
• [RFC PATCH] xilinx: dfu: Fill directly update_info.dfu_string   Michal Simek
• [PATCH v3 0/5] boards: siemens: iot2050: SM variant, sysinfo support, fixes & cleanups   Baocheng Su
  • [PATCH v3 1/5] smbios: Fill UUID from sysinfo when available   Baocheng Su
  • [PATCH v3 2/5] sysinfo: Add API for accessing data elements   Baocheng Su
  • [PATCH v3 3/5] sysinfo: Add SYSID_BOARD_RAM_SIZE_MB   Baocheng Su
  • [PATCH v3 4/5] sysinfo: Add driver for IOT2050 boards   Baocheng Su
  • [PATCH v3 5/5] board: siemens: iot2050: Use sysinfo for board initialization   Baocheng Su
    • [PATCH v3 5/5] board: siemens: iot2050: Use sysinfo for board initialization   Jan Kiszka
      • [PATCH v3 5/5] board: siemens: iot2050: Use sysinfo for board initialization   Su, Bao Cheng
• [PATCH RFC 1/6] tools: binman: ftest.py: fake ext blobs per default   Simon Glass
  • [PATCH RFC 1/6] tools: binman: ftest.py: fake ext blobs per default   Yannic Moog
    • [PATCH RFC 1/6] tools: binman: ftest.py: fake ext blobs per default   Simon Glass
      • [PATCH RFC 1/6] tools: binman: ftest.py: fake ext blobs per default   Yannic Moog
      • [PATCH RFC 1/6] tools: binman: ftest.py: fake ext blobs per default   Simon Glass
      • [PATCH RFC 1/6] tools: binman: ftest.py: fake ext blobs per default   Yannic Moog
• [PATCH RFC 5/6] binman: test: assert optional blobs don't cause non-functionality   Simon Glass
• [PATCH RFC 0/6] Fix handling of optional blobs in binman   Simon Glass
• [PATCH RFC 6/6] binman: doc: update Optional entries   Simon Glass
  • [PATCH RFC 6/6] binman: doc: update Optional entries   Yannic Moog
    • [PATCH RFC 6/6] binman: doc: update Optional entries   Simon Glass
      • [PATCH RFC 6/6] binman: doc: update Optional entries   Yannic Moog
      • [PATCH RFC 6/6] binman: doc: update Optional entries   Simon Glass
      • [PATCH RFC 6/6] binman: doc: update Optional entries   Yannic Moog
      • [PATCH RFC 6/6] binman: doc: update Optional entries   Simon Glass
      • [PATCH RFC 6/6] binman: doc: update Optional entries   Yannic Moog
      • [PATCH RFC 6/6] binman: doc: update Optional entries   Simon Glass
• [PATCH RFC 4/6] binman: fix faked optional entry handling   Simon Glass
• [PATCH RFC 3/6] tools: binman: ftest: fix tests that require non-faked ext blobs   Simon Glass
  • [PATCH RFC 3/6] tools: binman: ftest: fix tests that require non-faked ext blobs   Yannic Moog
• [PATCH RFC 2/6] tools: binman: ftest: pass allow_fake_blob to _DoReadFileDtb   Simon Glass
• [PATCH] efi_loader: efi_var_file: specify absolute path   Caleb Connolly
  • [PATCH] efi_loader: efi_var_file: specify absolute path   Heinrich Schuchardt
    • [PATCH] efi_loader: efi_var_file: specify absolute path   Caleb Connolly
• [PATCH 1/4] configs: phycore_am64x_a53_defconfig: Enable ENV_IS_IN_SPI_FLASH   Daniel Schultz
  • [PATCH 3/4] board: Phytec: phycore_am64x: Increase size for Image in SPI   Daniel Schultz
    • [PATCH 3/4] board: Phytec: phycore_am64x: Increase size for Image in SPI   Wadim Egorov
  • [PATCH 4/4] board: Phytec: phycore_am62x: Increase size for Image in SPI   Daniel Schultz
    • [PATCH 4/4] board: Phytec: phycore_am62x: Increase size for Image in SPI   Wadim Egorov
  • [PATCH 1/4] configs: phycore_am64x_a53_defconfig: Enable ENV_IS_IN_SPI_FLASH   Wadim Egorov
  • [PATCH 1/4] configs: phycore_am64x_a53_defconfig: Enable ENV_IS_IN_SPI_FLASH   Tom Rini
• [PATCH 2/4] configs: phycore_am62x_a53_defconfig: Enable ENV_IS_IN_SPI_FLASH   Daniel Schultz
  • [PATCH 2/4] configs: phycore_am62x_a53_defconfig: Enable ENV_IS_IN_SPI_FLASH   Wadim Egorov
• [PATCH 0/6] roc-pc-rk3399: Add SPL_DFU support   Arnaud Patard
  • [PATCH 0/6] roc-pc-rk3399: Add SPL_DFU support   Peter Robinson
• [PATCH 2/6] arch/arm/mach-rockchip/spl-boot-order.c: Add DFU boot media   Arnaud Patard
• [PATCH 3/6] arch/arm/mach-rockchip/rk3399/rk3399.c: Add gadget device to boot devices   Arnaud Patard
• [PATCH 4/6] include/configs/rk3399_common.h: define CFG_EXTRA_ENV_SETTINGS in XPL build   Arnaud Patard
  • [PATCH 4/6] include/configs/rk3399_common.h: define CFG_EXTRA_ENV_SETTINGS in XPL build   Quentin Schulz
• [PATCH 5/6] arch/arm/dts/rk3399-roc-pc-u-boot.dtsi: Prepare for SPL DFU   Arnaud Patard
  • [PATCH 5/6] arch/arm/dts/rk3399-roc-pc-u-boot.dtsi: Prepare for SPL DFU   Quentin Schulz
• [PATCH 6/6] configs/roc-pc-rk3399_defconfig: Enable SPL DFU for roc-pc-rk3399   Arnaud Patard
• [PATCH 1/6] drivers/Makefile: Fix TPL build with dwc3 generic   Tom Rini
  • [PATCH 1/6] drivers/Makefile: Fix TPL build with dwc3 generic   Arnaud Patard
  • [PATCH 1/6] drivers/Makefile: Fix TPL build with dwc3 generic   Arnaud Patard
    • [PATCH 1/6] drivers/Makefile: Fix TPL build with dwc3 generic   Tom Rini
    • [PATCH 1/6] drivers/Makefile: Fix TPL build with dwc3 generic   Quentin Schulz
      • [PATCH 1/6] drivers/Makefile: Fix TPL build with dwc3 generic   Arnaud Patard
• [PATCH] efi: Make FDT extra space configurable   Pawel Kochanowski
  • [PATCH] efi: Make FDT extra space configurable   Ilias Apalodimas
    • [PATCH] efi: Make FDT extra space configurable   Heinrich Schuchardt
      • [PATCH] efi: Make FDT extra space configurable   Simon Glass
      • [PATCH] efi: Make FDT extra space configurable   Heinrich Schuchardt
      • [PATCH] efi: Make FDT extra space configurable   Simon Glass
      • [PATCH] efi: Make FDT extra space configurable   Ilias Apalodimas
      • [PATCH] efi: Make FDT extra space configurable   Simon Glass
• [PATCH v4 0/3] clk: add a stub clock driver   Caleb Connolly
  • [PATCH v4 1/3] clk: add stub clock driver   Caleb Connolly
  • [PATCH v4 2/3] qcom_defconfig: enable stub clock   Caleb Connolly
  • [PATCH v4 3/3] clk: stub: add sm8150 compatible id   Caleb Connolly
    • [PATCH v4 3/3] clk: stub: add sm8150 compatible id   Neil Armstrong
  • [PATCH v4 0/3] clk: add a stub clock driver   Caleb Connolly
• [PATCH 0/2] Qualcomm: fix sdcard support on SM8250   Caleb Connolly
  • [PATCH 1/2] power: regulator: add additional supported LDOs for pm8150l   Caleb Connolly
    • [PATCH 1/2] power: regulator: add additional supported LDOs for pm8150l   Neil Armstrong
  • [PATCH 2/2] pinctrl: qcom: sm8250: fix pin count   Caleb Connolly
    • [PATCH 2/2] pinctrl: qcom: sm8250: fix pin count   Neil Armstrong
  • [PATCH 0/2] Qualcomm: fix sdcard support on SM8250   Caleb Connolly
  • [PATCH 0/2] Qualcomm: fix sdcard support on SM8250   Amit Pundir
  • [PATCH 0/2] Qualcomm: fix sdcard support on SM8250   Caleb Connolly
• [PATCH] rockchip: nanopi-r4s: Enable second usb port and fix crash   Justin Klaassen
  • [PATCH] rockchip: nanopi-r4s: Enable second usb port and fix crash   Kever Yang
    • [PATCH] rockchip: nanopi-r4s: Enable second usb port and fix crash   Justin Klaassen
  • [PATCH] rockchip: nanopi-r4s: Enable second usb port and fix crash   Kever Yang
• Git commit failed with mbedtls/framework   Tom Rini
• [PATCH 0/3] arm: meson: extend sm calls to support Amlogic chip_id v1, v2   Evgeny Bachinin
  • [PATCH 3/3] arch: arm: meson: support Amlogic chip_id v1 and v2   Evgeny Bachinin
  • [PATCH 0/3] arm: meson: extend sm calls to support Amlogic chip_id v1, v2   Viacheslav
  • [PATCH 0/3] arm: meson: extend sm calls to support Amlogic chip_id v1, v2   neil.armstrong at linaro.org
• [PATCH 1/3] arm: meson: unify type being used for socinfo   Evgeny Bachinin
• [PATCH 2/3] arm: meson: sm: get rid of SM_CHIP_ID_SIZE   Evgeny Bachinin
• [PATCH v1] configs: starfive: use LwIP network stack and enable wget command   E Shattow
  • [PATCH v1] configs: starfive: use LwIP network stack and enable wget command   Leo Liang
• [PATCH v5 00/10] Introduce K3 remoteproc driver for M4 subsystem   Judith Mendez
  • [PATCH v5 01/10] remoteproc: k3-m4: Introduce K3 remote proc driver for M4 subsystem   Judith Mendez
  • [PATCH v5 02/10] remoteproc: k3-r5: Add support for R5F cores on AM64x SoCs   Judith Mendez
  • [PATCH v5 03/10] board: ti: am64x: Add remoteproc specific env support   Judith Mendez
  • [PATCH v5 04/10] board: ti: am62x: Add remoteproc specific env support   Judith Mendez
  • [PATCH v5 05/10] board: ti: am62px: Add remoteproc specific env support   Judith Mendez
  • [PATCH v5 06/10] remoteproc: Enable ARM64 remoteproc driver by default for K3 ARCH   Judith Mendez
  • [PATCH v5 07/10] spl: Enable SPL remoteproc by default for K3 ARCH   Judith Mendez
  • [PATCH v5 08/10] cmd: Enable CMD remoteproc by default for K3 ARCH   Judith Mendez
  • [PATCH v5 09/10] arm: mach-k3: Enable remoteproc drivers by default for K3 ARCH   Judith Mendez
  • [PATCH v5 10/10] configs: am6*/j7*: Remove remoteproc configs   Judith Mendez
  • [PATCH v5 00/10] Introduce K3 remoteproc driver for M4 subsystem   Judith Mendez
    • [PATCH v5 00/10] Introduce K3 remoteproc driver for M4 subsystem   Tom Rini
      • [PATCH v5 00/10] Introduce K3 remoteproc driver for M4 subsystem   Judith Mendez
  • [PATCH v5 00/10] Introduce K3 remoteproc driver for M4 subsystem   Tom Rini
• [PATCH] include: env: phytec: Add optargs to K3 files   Tom Rini
• [PATCH 0/2] Enable MCU ESM reset   Tom Rini
• (subset) [PATCH 0/8] Reverts and fixes for board failures   Tom Rini
  • (subset) [PATCH 0/8] Reverts and fixes for board failures   Ilias Apalodimas
    • (subset) [PATCH 0/8] Reverts and fixes for board failures   Tom Rini
• [ANN] U-Boot v2025.04-rc2 released   Tom Rini
  • [ANN] U-Boot v2025.04-rc2 released   Heinrich Schuchardt
    • [ANN] U-Boot v2025.04-rc2 released   Michal Simek
    • [ANN] U-Boot v2025.04-rc2 released   Tom Rini
  • [ANN] U-Boot v2025.04-rc2 released   Alexander Dahl
  • [ANN] U-Boot v2025.04-rc2 released   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
  • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heiko Schocher
    • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
  • New Defects reported by Coverity Scan for Das U-Boot   Raymond Mao
    • New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
  • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
    • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heiko Schocher
      • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Quentin Schulz
      • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heiko Schocher
• [PATCH v1] net: designware: Add npcm8xx sgmii pcs support   Jim Liu
  • [PATCH v1] net: designware: Add npcm8xx sgmii pcs support   Tom Rini
• [PATCH v2 1/2] rockchip: Fix TPL link error   FUKAUMI Naoki
  • [PATCH v2 2/2] rockchip: Fix SPL link error for Radxa ROCK Pi 4   FUKAUMI Naoki
    • [PATCH v2 2/2] rockchip: Fix SPL link error for Radxa ROCK Pi 4   Quentin Schulz
  • [PATCH v2 1/2] rockchip: Fix TPL link error   Quentin Schulz
• [PATCH 0/7] rockchip: Add boot from USB OTG port   FUKAUMI Naoki
  • [PATCH 4/7] rockchip: Add DFU to SPL for RK3568   FUKAUMI Naoki
• [PATCH 1/7] rockchip: Change memory location of FIT and U-Boot proper   FUKAUMI Naoki
• [PATCH 2/7] rockchip: Add DFU to SPL   FUKAUMI Naoki
• [PATCH 3/7] rockchip: Add DFU to SPL for RK3588   FUKAUMI Naoki
• [PATCH 5/7] rockchip: Add DFU to SPL for RK3399   FUKAUMI Naoki
• [PATCH 6/7] rockchip: Add DFU to SPL for RK3328   FUKAUMI Naoki
• [PATCH 7/7] rockchip: Add DFU to SPL for RK3308   FUKAUMI Naoki
• [PATCH 0/6] rockchip: Add DFU to boot from USB for Radxa boards   FUKAUMI Naoki
  • [PATCH 1/6] rockchip: Add DFU to boot from USB for Radxa ROCK 5B   FUKAUMI Naoki
  • [PATCH 2/6] rockchip: Add DFU to boot from USB for Radxa ROCK 3A   FUKAUMI Naoki
  • [PATCH 3/6] rockchip: Add DFU to boot from USB for Radxa ROCK 3B   FUKAUMI Naoki
  • [PATCH 4/6] rockchip: Add DFU to boot from USB for Radxa ZERO 3E/3W   FUKAUMI Naoki
  • [PATCH 5/6] rockchip: Add DFU to boot from USB for Radxa ROCK Pi E v1/v3   FUKAUMI Naoki
  • [PATCH 6/6] rockchip: Add DFU to boot from USB for Radxa ROCK Pi S   FUKAUMI Naoki
• [PATCH v2 1/2] arch: arm: dts: k3-am625-phycore-som-binman: Add custMpk to overlays   Daniel Schultz
  • [PATCH v2 2/2] arch: arm: dts: k3-am642-phycore-som-binman: Add custMpk to overlays   Daniel Schultz
    • [PATCH v2 2/2] arch: arm: dts: k3-am642-phycore-som-binman: Add custMpk to overlays   Wadim Egorov
    • [PATCH v2 2/2] arch: arm: dts: k3-am642-phycore-som-binman: Add custMpk to overlays   Daniel Schultz
  • [PATCH v2 1/2] arch: arm: dts: k3-am625-phycore-som-binman: Add custMpk to overlays   Wadim Egorov
  • [PATCH v2 1/2] arch: arm: dts: k3-am625-phycore-som-binman: Add custMpk to overlays   Tom Rini
• [PATCH v1] arch: meson: sm: add retrieve SoC chipid   Viacheslav
• [PATCH] mbedtls/external: remove broken git submodule   ZHANG Yuntian
  • [PATCH] mbedtls/external: remove broken git submodule   Tom Rini
• [uU PATCH 0/3] FIT Image Boot Fixes for am57xx_hs_evm   Anurag Dutta
  • [uU PATCH 1/3] include: configs: Override get_fit_config to get FIT config for AM57x   Anurag Dutta
  • [uU PATCH 2/3] configs: omap5: Enable custom mmc boot to distroboot for AM57x   Anurag Dutta
  • [uU PATCH 3/3] include: configs: omap5: Add support for FDT overlay   Anurag Dutta
  • [uU PATCH 0/3] FIT Image Boot Fixes for am57xx_hs_evm   Tom Rini
• [PATCH] configs: stm32f769-disco: Fix console cmdline   Linus Walleij
  • [PATCH] configs: stm32f769-disco: Fix console cmdline   Patrice CHOTARD
• [RESEND PATCH 0/3] FIT Image Boot Fixes for am57xx_hs_evm   Anurag Dutta
  • [RESEND PATCH 2/3] configs: omap5: Enable custom mmc boot to distroboot for AM57x   Anurag Dutta
  • [RESEND PATCH 3/3] include: configs: omap5: Add support for FDT overlay   Anurag Dutta
  • [RESEND PATCH 0/3] FIT Image Boot Fixes for am57xx_hs_evm   Tom Rini
• [RESEND PATCH 1/3] include: configs: Override get_fit_config to get FIT config for AM57x   Anurag Dutta
• [PATCH] efi_loader: remove comparisons to string literals from runtime   Ilias Apalodimas
  • [PATCH] efi_loader: remove comparisons to string literals from runtime   Heinrich Schuchardt
  • [PATCH] efi_loader: remove comparisons to string literals from runtime   Mark Kettenis
    • [PATCH] efi_loader: remove comparisons to string literals from runtime   Ilias Apalodimas
      • [PATCH] efi_loader: remove comparisons to string literals from runtime   Mark Kettenis
      • [PATCH] efi_loader: remove comparisons to string literals from runtime   Ilias Apalodimas
  • [PATCH] efi_loader: remove comparisons to string literals from runtime   Ilias Apalodimas
    • [PATCH] efi_loader: remove comparisons to string literals from runtime   Ilias Apalodimas
    • [PATCH] efi_loader: remove comparisons to string literals from runtime   Mark Kettenis
• [PATCH 0/3] rockchip: remove u-boot.rom generation and use binaries from simple-bin in simple-bin-image   Quentin Schulz
  • [PATCH 1/3] rockchip: rk3399: do not generate u-boot.rom anymore   Quentin Schulz
    • [PATCH 1/3] rockchip: rk3399: do not generate u-boot.rom anymore   Jonas Karlman
  • [PATCH 2/3] rockchip: rk3288: do not generate u-boot.rom anymore   Quentin Schulz
    • [PATCH 2/3] rockchip: rk3288: do not generate u-boot.rom anymore   Jonas Karlman
  • [PATCH 3/3] rockchip: avoid rebuilding most binaries for u-boot-rockchip-spi.bin   Quentin Schulz
    • [PATCH 3/3] rockchip: avoid rebuilding most binaries for u-boot-rockchip-spi.bin   Jonas Karlman
      • [PATCH 3/3] rockchip: avoid rebuilding most binaries for u-boot-rockchip-spi.bin   Quentin Schulz
  • [PATCH 0/3] rockchip: remove u-boot.rom generation and use binaries from simple-bin in simple-bin-image   Simon Glass
    • [PATCH 0/3] rockchip: remove u-boot.rom generation and use binaries from simple-bin in simple-bin-image   Simon Glass
      • [PATCH 0/3] rockchip: remove u-boot.rom generation and use binaries from simple-bin in simple-bin-image   Quentin Schulz
      • [PATCH 0/3] rockchip: remove u-boot.rom generation and use binaries from simple-bin in simple-bin-image   Simon Glass
      • [PATCH 0/3] rockchip: remove u-boot.rom generation and use binaries from simple-bin in simple-bin-image   Quentin Schulz
      • [PATCH 0/3] rockchip: remove u-boot.rom generation and use binaries from simple-bin in simple-bin-image   Simon Glass
• [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Sughosh Ganu
  • [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Alexander Dahl
    • [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Sughosh Ganu
      • [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Tom Rini
      • [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Sughosh Ganu
      • [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Tom Rini
      • [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Sughosh Ganu
      • [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Tom Rini
      • [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Sughosh Ganu
      • [PATCH v4 05/15] lmb: notify of any changes to the LMB memory map   Tom Rini
• [PATCH v2 0/4] Add support for BR Xylinx Zynq boards in mainline U-Boot.   Bernhard Messerklinger
  • [PATCH v2 4/4] board/BuR/zynq: initial commit   Bernhard Messerklinger
    • [PATCH v2 4/4] board/BuR/zynq: initial commit   Michal Simek
• [PATCH v2 1/4] board/BuR/common: use strlcpy instead of strncpy   Bernhard Messerklinger
• [PATCH v2 2/4] board/BuR/common: add parameter for reset controller I2C bus selection   Bernhard Messerklinger
• [PATCH v2 3/4] board/BuR/common: split br_resetc_bmode function   Bernhard Messerklinger
• [PATCH v2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Marek Vasut
  • [PATCH v2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Quentin Schulz
    • [PATCH v2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Marek Vasut
      • [PATCH v2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Quentin Schulz
  • [PATCH v2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Mattijs Korpershoek
  • [PATCH v2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Tom Rini
• [PATCH v2 1/1] tools: use cryptographically safe RNG   Heinrich Schuchardt
  • [PATCH v2 1/1] tools: use cryptographically safe RNG   Tom Rini
• [RFC] Raspberry Pi: copy /system/linux, {serial, revision} from firmware   Fiona Klute
  • [RFC] Raspberry Pi: copy /system/linux, {serial, revision} from firmware   Simon Glass
    • [RFC] Raspberry Pi: copy /system/linux, {serial, revision} from firmware   Matthias Brugger
      • [RFC] Raspberry Pi: copy /system/linux, {serial, revision} from firmware   Simon Glass
  • [RFC] Raspberry Pi: copy /system/linux, {serial, revision} from firmware   Peter Robinson
• [PATCH v2] arm: Remove redundant loading of image copy start offse   Tom Rini
• [PATCH] tools: fix NULL_AFTER_DEREF in image-host.c   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20250211   Mattijs Korpershoek
  • [GIT PULL] Please pull u-boot-dfu-20250211   Tom Rini
• xPL Proposal   Simon Glass
  • xPL Proposal   Tom Rini
    • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • Generic U-Boot (was: Re: xPL Proposal)   Caleb Connolly
      • Generic U-Boot   Caleb Connolly
      • Generic U-Boot   Tom Rini
      • Generic U-Boot (was: Re: xPL Proposal)   Tom Rini
    • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • Rate of change in the project (Was: Re: xPL Proposal)   Tom Rini
      • Rate of change in the project (Was: Re: xPL Proposal)   Simon Glass
      • Rate of change in the project (Was: Re: xPL Proposal)   Tom Rini
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
  • xPL Proposal   Marek Vasut
    • xPL Proposal   Simon Glass
  • xPL Proposal   Tom Rini
    • xPL Proposal   Simon Glass
      • xPL Proposal   Tom Rini
      • xPL Proposal   Jonas Karlman
  • xPL Proposal   Tom Rini
  • xPL Proposal   Tom Rini
• [PATCH] scripts: kconfig: Fix potential NULL pointer dereference in   Anton Moryakov
  • [PATCH] scripts: kconfig: Fix potential NULL pointer dereference in   Tom Rini
• [PATCH] power: regulator: tps65941: Fix voltage calculation for ldo   Udit Kumar
  • [PATCH] power: regulator: tps65941: Fix voltage calculation for ldo   Neha Malcom Francis
  • [PATCH] power: regulator: tps65941: Fix voltage calculation for ldo   Tom Rini
• [PATCH v1] gpio: pca953x: support pcal6408 and pcal6416   Francesco Dolcini
  • [PATCH v1] gpio: pca953x: support pcal6408 and pcal6416   Tom Rini
• [PATCH v2 0/5] rng: msm: fixes for MSM8916   Sam Day
  • [PATCH v2 1/5] clk/qcom: apq8016: use BIT macro for clk en_vals   Sam Day
    • [PATCH v2 1/5] clk/qcom: apq8016: use BIT macro for clk en_vals   Heinrich Schuchardt
  • [PATCH v2 2/5] clk/qcom: apq8016: add PRNG_AHB_CLK   Sam Day
  • [PATCH v2 3/5] rng: msm: don't enable PRNG if it's already enabled   Sam Day
  • [PATCH v2 4/5] clk/qcom: apq8016: improve clk_enable logging   Sam Day
  • [PATCH v2 5/5] rng: msm: keep core clock disabled when PRNG not in use   Sam Day
    • [PATCH v2 5/5] rng: msm: keep core clock disabled when PRNG not in use   Neil Armstrong
  • [PATCH v2 0/5] rng: msm: fixes for MSM8916   Caleb Connolly
• [PATCH v3 3/3] mtd: nand: raw: atmel: Fix pulse read timing for certain NAND flashes   Alexander Dahl
  • [PATCH v3 3/3] mtd: nand: raw: atmel: Fix pulse read timing for certain NAND flashes   Eugen Hristev
    • [PATCH v3 3/3] mtd: nand: raw: atmel: Fix pulse read timing for certain NAND flashes   Michael Nazzareno Trimarchi
      • [PATCH v3 3/3] mtd: nand: raw: atmel: Fix pulse read timing for certain NAND flashes   Eugen Hristev
• [PATCH v1] led: fix coverity scan error   Heiko Schocher
  • [PATCH v1] led: fix coverity scan error   Tom Rini
• [RFC PATCH 0/2 v1] Propagate bootph* property to all parent nodes   Moteen Shah
  • [RFC PATCH 1/2 v1] arch: arm: Kconfig: Add config to use subnode's bootph property for binding drivers   Moteen Shah
    • [RFC PATCH 1/2 v1] arch: arm: Kconfig: Add config to use subnode's bootph property for binding drivers   Kumar, Udit
      • [RFC PATCH 1/2 v1] arch: arm: Kconfig: Add config to use subnode's bootph property for binding drivers   Moteen Shah
    • [RFC PATCH 1/2 v1] arch: arm: Kconfig: Add config to use subnode's bootph property for binding drivers   Simon Glass
      • [EXTERNAL] Re: [RFC PATCH 1/2 v1] arch: arm: Kconfig: Add config to use subnode's bootph property for binding drivers   Moteen Shah
      • [EXTERNAL] Re: [RFC PATCH 1/2 v1] arch: arm: Kconfig: Add config to use subnode's bootph property for binding drivers   Simon Glass
  • [RFC PATCH 2/2 v1] drivers: core: lists.c: Bind drivers using bootph* property in subnodes   Moteen Shah
    • [RFC PATCH 2/2 v1] drivers: core: lists.c: Bind drivers using bootph* property in subnodes   Simon Glass
      • [EXTERNAL] Re: [RFC PATCH 2/2 v1] drivers: core: lists.c: Bind drivers using bootph* property in subnodes   Moteen Shah
    • [RFC PATCH 2/2 v1] drivers: core: lists.c: Bind drivers using bootph* property in subnodes   Kumar, Udit
  • [RFC PATCH 0/2 v1] Propagate bootph* property to all parent nodes   Quentin Schulz
    • [RFC PATCH 0/2 v1] Propagate bootph* property to all parent nodes   Moteen Shah
      • [RFC PATCH 0/2 v1] Propagate bootph* property to all parent nodes   Quentin Schulz
      • [RFC PATCH 0/2 v1] Propagate bootph* property to all parent nodes   Simon Glass
      • [RFC PATCH 0/2 v1] Propagate bootph* property to all parent nodes   Quentin Schulz
• [PATCH] fs/erofs: fix an integer overflow in symlink resolution   Gao Xiang
  • [PATCH] fs/erofs: fix an integer overflow in symlink resolution   Jonathan Bar Or
  • [PATCH] fs/erofs: fix an integer overflow in symlink resolution   Gao Xiang
    • [PATCH] fs/erofs: fix an integer overflow in symlink resolution   Jonathan Bar Or
• [PATCH 0/6] Add preload_check_sign tool   Paul HENRYS
  • [PATCH 1/6] rsa: Add rsa_verify_openssl() to use openssl for host builds   Paul HENRYS
  • [PATCH 3/6] boot: Add support of the pre-load signature for host tools   Paul HENRYS
  • [PATCH 4/6] tools: Add preload_check_sign to authenticate images with a pre-load   Paul HENRYS
  • [PATCH 6/6] binman: Authenticate the image when testing the preload signature   Paul HENRYS
  • [PATCH 0/6] Add preload_check_sign tool   Tom Rini
    • [PATCH 0/6] Add preload_check_sign tool   Tom Rini
      • [PATCH 0/6] Add preload_check_sign tool   Paul HENRYS
      • [PATCH 0/6] Add preload_check_sign tool   Tom Rini
• [PATCH 2/6] image: Add an inline declaration of unmap_sysmem()   Paul HENRYS
• [PATCH 5/6] configs: Enable the pre-load signature in tools-only_defconfig   Paul HENRYS
• [PATCH v1 5/5] ARM: tegra124: dts: mark HOST1X and DC with pre-relocation flag   Svyatoslav Ryhel
  • [PATCH v1 5/5] ARM: tegra124: dts: mark HOST1X and DC with pre-relocation flag   Svyatoslav Ryhel
    • [PATCH v1 5/5] ARM: tegra124: dts: mark HOST1X and DC with pre-relocation flag   Simon Glass
• [PATCH 1/2] Raspberry Pi: Keep warnings from firmware in DT, if any   Fiona Klute
  • [PATCH 1/2] Raspberry Pi: Keep warnings from firmware in DT, if any   Matthias Brugger
• [PATCH 2/2] Raspberry Pi: Copy Bluetooth device address in DT   Fiona Klute
• Please pull u-boot-net-20250212   Jerome Forissier
  • Please pull u-boot-net-20250212   Tom Rini
    • Please pull u-boot-net-20250212   Jerome Forissier
• [PATCH v1] mtd: rawnand: meson: always use OOB bytes during write   Arseniy Krasnov
• [PATCH v2 1/6] dts: ipq9574-rdp433-u-boot: add override dtsi   Caleb Connolly
• [PATCH v2 2/6] clk/qcom: add initial clock driver for ipq9574   Caleb Connolly
• [PATCH v2 3/6] pinctrl: qcom: Add ipq9574 pinctrl driver   Caleb Connolly
• [PATCH v2 5/6] qcom_defconfig: enable ipq9574 clock & pinctrl driver   Caleb Connolly
• [PATCH v2 6/6] configs: add ipq9574_mmc_defconfig   Caleb Connolly
• [PATCH v2 0/6] Add initial support for IPQ9574 based boards   Caleb Connolly
• [PATCH 0/7] [U-Boot] spi: atmel-quadspi: Refresh and add classic mode support   Eugen Hristev
• [PATCH 1/2] spi: ca_sflash: Remove redundant dependency   Eugen Hristev
• [PATCH 2/2] spi: atmel-quadspi: Depend on SPI_MEM   Eugen Hristev
• [PATCH RFC] binman: Handle some newer pylint warnings   Tom Rini
  • [PATCH RFC] binman: Handle some newer pylint warnings   Tom Rini
    • [PATCH RFC] binman: Handle some newer pylint warnings   Simon Glass
      • [PATCH RFC] binman: Handle some newer pylint warnings   Tom Rini
• [PATCH] tools/patman: Don't call a non-existent suite   Tom Rini
  • [PATCH] tools/patman: Don't call a non-existent suite   Tom Rini
• [PATCH] tools/microcode-tool.py: Disable some new pylint warnings   Tom Rini
• [PATCH] buildman: Fix some newer pylint warnings   Tom Rini
• [PATCH] tools: binman: ti_board_cfg: Fix pylint error over 'br'   Tom Rini
  • [PATCH] tools: binman: ti_board_cfg: Fix pylint error over 'br'   Neha Malcom Francis
  • [PATCH] tools: binman: ti_board_cfg: Fix pylint error over 'br'   Tom Rini
• [PATCH] binman: Switch to setuptools   Tom Rini
  • [PATCH] binman: Switch to setuptools   Tom Rini
• [PATCH] dtoc: Switch to setuptools   Tom Rini
  • [PATCH] dtoc: Switch to setuptools   Tom Rini
• [PATCH] test/py: Have test_usb.py raise an Exception with unsupported filesystems   Tom Rini
  • [PATCH] test/py: Have test_usb.py raise an Exception with unsupported filesystems   Tom Rini
• [PATCH] test/py: Rework how test_ums.py handles (not) having write enabled   Tom Rini
  • [PATCH] test/py: Rework how test_ums.py handles (not) having write enabled   Tom Rini
• [PATCH] test/py: Rework test_spi.py to assert we found output   Tom Rini
  • [PATCH] test/py: Rework test_spi.py to assert we found output   Tom Rini
• [PATCH] Dockerfile: Add missing 'rm -rf /tmp/coreboot-24.08'   Tom Rini
• [resend v2 00/19] Add Cadence NAND Driver support   Maniyam, Dinesh
  • [resend v2 00/19] Add Cadence NAND Driver support   Maniyam, Dinesh
  • [resend v2 00/19] Add Cadence NAND Driver support   Maniyam, Dinesh
    • [resend v2 00/19] Add Cadence NAND Driver support   Maniyam, Dinesh
• [PATCH v3 0/8] Introduce J742S2 SoC and EVM   Manorit Chawdhry
  • [PATCH v3 1/8] tools: binman: control.py: Delete template nodes after parsing   Manorit Chawdhry
    • [PATCH v3 1/8] tools: binman: control.py: Delete template nodes after parsing   Simon Glass
  • [PATCH v3 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Manorit Chawdhry
  • [PATCH v3 3/8] arm: dts: k3-j784s4-ddr: Refactor J784s4 ddr file to a common file   Manorit Chawdhry
  • [PATCH v3 4/8] soc: Add information to identify the J742S2 SoC family   Manorit Chawdhry
  • [PATCH v3 5/8] arm: mach-k3: j742s2: Introduce clock and device files for J742S2 SoC   Manorit Chawdhry
  • [PATCH v3 6/8] board: ti: Introduce basic board files for the J742S2 family   Manorit Chawdhry
  • [PATCH v3 7/8] arm: dts: Introduce J742S2 U-boot DTS files   Manorit Chawdhry
  • [PATCH v3 8/8] configs: Introduce configs for J742S2   Manorit Chawdhry
• [PATCH] arm: mediatek: build u-boot-mtk.bin only if needed   Weijie Gao
  • [PATCH] arm: mediatek: build u-boot-mtk.bin only if needed   Tom Rini
• [PATCH] arm: mediatek: compile dts files only for matched target   Weijie Gao
  • [PATCH] arm: mediatek: compile dts files only for matched target   Tom Rini
    • [PATCH] arm: mediatek: compile dts files only for matched target   Weijie Gao
• [PATCH] arm: mediatek: remove CONFIG_MT8512   Weijie Gao
  • [PATCH] arm: mediatek: remove CONFIG_MT8512   Tom Rini
• [PATCH] remoteproc: k3-dsp: Flush D cache after loading firmware   Beleswar Padhi
  • [PATCH] remoteproc: k3-dsp: Flush D cache after loading firmware   Tom Rini
• [PATCH v2] fs/erofs: fix an integer overflow in symlink resolution   Gao Xiang
  • [PATCH v2] fs/erofs: fix an integer overflow in symlink resolution   Tom Rini
    • [PATCH v2] fs/erofs: fix an integer overflow in symlink resolution   Jonathan Bar Or
    • [PATCH v2] fs/erofs: fix an integer overflow in symlink resolution   Tom Rini
• [PATCH 1/1] tpm: fixed the nv_define_space command in TPMv2   Michel Alex
  • [PATCH 1/1] tpm: fixed the nv_define_space command in TPMv2   Ilias Apalodimas
    • [PATCH 1/1] tpm: fixed the nv_define_space command in TPMv2   Michel Alex
    • [PATCH 1/1] tpm: fixed the nv_define_space command in TPMv2   Ilias Apalodimas
• [PATCH 0/4] lmb: miscellaneous fixes and improvements   Sughosh Ganu
  • [PATCH 1/4] lmb: check if a region can be reserved by lmb_reserve()   Sughosh Ganu
    • [PATCH 1/4] lmb: check if a region can be reserved by lmb_reserve()   Heinrich Schuchardt
      • [PATCH 1/4] lmb: check if a region can be reserved by lmb_reserve()   Sughosh Ganu
  • [PATCH 2/4] lmb: handle scenario of of encompassing overlap   Sughosh Ganu
    • [PATCH 2/4] lmb: handle scenario of of encompassing overlap   Quentin Schulz
      • [PATCH 2/4] lmb: handle scenario of of encompassing overlap   Sughosh Ganu
    • [PATCH 2/4] lmb: handle scenario of of encompassing overlap   Simon Glass
      • [PATCH 2/4] lmb: handle scenario of of encompassing overlap   Sughosh Ganu
      • [PATCH 2/4] lmb: handle scenario of of encompassing overlap   Simon Glass
  • [PATCH 3/4] lmb: check for a region's coalescing with all existing regions   Sughosh Ganu
    • [PATCH 3/4] lmb: check for a region's coalescing with all existing regions   Quentin Schulz
      • [PATCH 3/4] lmb: check for a region's coalescing with all existing regions   Sughosh Ganu
  • [PATCH 4/4] lmb: build lmb_map_update_notify() only with EFI_LOADER   Sughosh Ganu
    • [PATCH 4/4] lmb: build lmb_map_update_notify() only with EFI_LOADER   Tom Rini
    • [PATCH 4/4] lmb: build lmb_map_update_notify() only with EFI_LOADER   Alexander Dahl
  • [PATCH 0/4] lmb: miscellaneous fixes and improvements   Sughosh Ganu
• [PATCH 1/2] bloblist: refactor xferlist and bloblist   Raymond Mao
  • [PATCH 2/2] bloblist: kconfig for mandatory incoming standard passage   Raymond Mao
• [PATCH] imx: fix imx8mm_evk config   Ludwig Nussel
  • [PATCH] imx: fix imx8mm_evk config   Fabio Estevam
  • [PATCH] imx: fix imx8mm_evk config   Fabio Estevam
    • [PATCH] imx: fix imx8mm_evk config   Peng Fan
      • [PATCH] imx: fix imx8mm_evk config   Fabio Estevam
• Please pull u-boot-tegra misc   Svyatoslav Ryhel
  • Please pull u-boot-tegra misc   Tom Rini
• [ANN] Adding contributor repositories   Tom Rini
• [PATCH v3 0/3] EFI Capsule update explicitly sets dfu_alt_info   Jonathan Humphreys
  • [PATCH v3 1/3] xilinx: dfu: Fill directly update_info.dfu_string   Jonathan Humphreys
    • [PATCH v3 1/3] xilinx: dfu: Fill directly update_info.dfu_string   Mattijs Korpershoek
    • [PATCH v3 1/3] xilinx: dfu: Fill directly update_info.dfu_string   Ilias Apalodimas
  • [PATCH v3 2/3] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Jonathan Humphreys
    • [PATCH v3 2/3] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Mattijs Korpershoek
    • [PATCH v3 2/3] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Ilias Apalodimas
      • [PATCH v3 2/3] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Jon Humphreys
      • [PATCH v3 2/3] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Ilias Apalodimas
  • [PATCH v3 3/3] board: remove capsule update support in set_dfu_alt_info()   Jonathan Humphreys
    • [PATCH v3 3/3] board: remove capsule update support in set_dfu_alt_info()   Ilias Apalodimas
  • [PATCH v3 0/3] EFI Capsule update explicitly sets dfu_alt_info   Michal Simek
• Detect i2c in SPL for AST2600   CW1 Huang(黃志偉)
• [BUG report] spl: image size check fails in spl_load()   Anshul Dalal
  • [BUG report] spl: image size check fails in spl_load()   Sean Anderson
    • [BUG report] spl: image size check fails in spl_load()   Anshul Dalal
      • [BUG report] spl: image size check fails in spl_load()   Sean Anderson
      • [BUG report] spl: image size check fails in spl_load()   Anshul Dalal
      • [BUG report] spl: image size check fails in spl_load()   Sean Anderson
• [RFC PATCH 00/10] Uthreads   Jerome Forissier
  • [RFC PATCH 02/10] arm: add initjmp()   Jerome Forissier
    • [RFC PATCH 02/10] arm: add initjmp()   Heinrich Schuchardt
      • [RFC PATCH 02/10] arm: add initjmp()   Jerome Forissier
  • [RFC PATCH 03/10] riscv: add initjmp()   Jerome Forissier
  • [RFC PATCH 04/10] sandbox: add initjmp()   Jerome Forissier
  • [RFC PATCH 05/10] test: lib: add initjmp() test   Jerome Forissier
  • [RFC PATCH 06/10] uthread: add cooperative multi-tasking interface   Jerome Forissier
    • [RFC PATCH 06/10] uthread: add cooperative multi-tasking interface   Heinrich Schuchardt
    • [RFC PATCH 06/10] uthread: add cooperative multi-tasking interface   Yao Zi
      • [RFC PATCH 06/10] uthread: add cooperative multi-tasking interface   Jerome Forissier
  • [RFC PATCH 07/10] lib: time: hook uthread_schedule() into udelay()   Jerome Forissier
  • [RFC PATCH 08/10] dm: usb: move bus initialization into new static function usb_init_bus()   Jerome Forissier
  • [RFC PATCH 09/10] dm: usb: initialize and scan multiple buses simultaneously with uthread   Jerome Forissier
  • [RFC PATCH 10/10] test: lib: add uthread test   Jerome Forissier
    • [RFC PATCH 10/10] test: lib: add uthread test   Yao Zi
      • [RFC PATCH 10/10] test: lib: add uthread test   Jerome Forissier
• [RFC PATCH 01/10] arch: introduce symbol HAVE_INITJMP   Jerome Forissier
  • [RFC PATCH 01/10] arch: introduce symbol HAVE_INITJMP   Heinrich Schuchardt
    • [RFC PATCH 01/10] arch: introduce symbol HAVE_INITJMP   Jerome Forissier
• [PATCH] feat: Add CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig   Tom Rini
  • [PATCH] feat: Add CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig   Fabio Estevam
• [PATCH] lib: lmb: conditionally include EFI loader notification   1425075683 at qq.com
  • [PATCH] lib: lmb: conditionally include EFI loader notification   Heinrich Schuchardt
• [PATCH v4 00/29] arm: Support building as an EFI app   Simon Glass
  • [PATCH v4 00/29] arm: Support building as an EFI app   Tom Rini
• [PATCH v4 01/29] Makefile: Avoid using TEXT_BASE with the EFI APP   Simon Glass
  • [PATCH v4 01/29] Makefile: Avoid using TEXT_BASE with the EFI APP   Tom Rini
• [PATCH v4 02/29] video: Move vesa_setup_video_priv() into its own file   Simon Glass
• [PATCH v4 03/29] video: Use a local mode_info struct in the EFI driver   Simon Glass
• [PATCH v4 04/29] lib: Provide fdtdec_get_pci_bar32() only with PCI enabled   Simon Glass
• [PATCH v4 05/29] efi: Rename app and payload to include x86   Simon Glass
• [PATCH v4 06/29] efi: Allow board/efi Kconfig to be used outside x86   Simon Glass
• [PATCH v4 07/29] efi: x86: Move EFI SDRAM-handling into a common file   Simon Glass
• [PATCH v4 08/29] treewide: Rename VENDOR_EFI to ARCH_EFI   Simon Glass
• [PATCH v4 09/29] efi: x86: Rework VENDOR_EFI option to permit other archs   Simon Glass
• [PATCH v4 10/29] efi: x86: Allow setting the global_data pointer with EFI   Simon Glass
• [PATCH v4 11/29] efi: Tidy up setup of global_data   Simon Glass
• [PATCH v4 12/29] efi: Rename ImageBase to image_base   Simon Glass
• [PATCH v4 13/29] efi: lmb: Avoid access to _start   Simon Glass
• [PATCH v4 14/29] efi: arm: Don't do the EL2 switch when running under EFI   Simon Glass
• [PATCH v4 15/29] efi: arm: Avoid allocating page tables when running under EFI   Simon Glass
• [PATCH v4 16/29] efi: arm: Avoid enabling caches when running under EFI   Simon Glass
• [PATCH v4 17/29] efi: arm: Implement access to global_data for EFI   Simon Glass
• [PATCH v4 18/29] efi: arm: Omit the ARM start-up code in the EFI app   Simon Glass
• [PATCH v4 19/29] efi: arm: Drop exception-level code when running as EFI app   Simon Glass
• [PATCH v4 20/29] efi: arm: x86: Allow use of the EFI table in the app   Simon Glass
• [PATCH v4 21/29] efi: arm: Disable --gc-sections for the app   Simon Glass
• [PATCH v4 22/29] efi: arm: Drop startup code from the app   Simon Glass
• [PATCH v4 23/29] efi: arm: Adjust how the monitor length is calculated   Simon Glass
• [PATCH v4 24/29] efi: arm: Provide startup and relocation code   Simon Glass
• [PATCH v4 25/29] efi: Generate the app as a shared library   Simon Glass
• [PATCH v4 26/29] efi: arm: Disable STATIC_RELA for the EFI app   Simon Glass
• [PATCH v4 27/29] efi: arm: Use EFI flags for all compilation with the app   Simon Glass
• [PATCH v4 28/29] efi: arm: Simplify the crt0 file and update link script   Simon Glass
• [PATCH v4 29/29] efi: arm: Add an EFI app for arm64   Simon Glass
• [PATCH 1/1] tools: binman: etype: Allow to replace 'NAME' in node names   Simon Glass
  • [PATCH 1/1] tools: binman: etype: Allow to replace 'NAME' in node names   Paul HENRYS
    • [PATCH 1/1] tools: binman: etype: Allow to replace 'NAME' in node names   Simon Glass
• [PATCH v3 00/46] pxe: Support read_all() for extlinux and PXE   Simon Glass
  • [PATCH v3 00/46] pxe: Support read_all() for extlinux and PXE   Tom Rini
    • [PATCH v3 00/46] pxe: Support read_all() for extlinux and PXE   Simon Glass
      • [PATCH v3 00/46] pxe: Support read_all() for extlinux and PXE   Tom Rini
      • [PATCH v3 00/46] pxe: Support read_all() for extlinux and PXE   Simon Glass
      • [PATCH v3 00/46] pxe: Support read_all() for extlinux and PXE   Tom Rini
      • [PATCH v3 00/46] pxe: Support read_all() for extlinux and PXE   Tom Rini
      • [PATCH v3 00/46] pxe: Support read_all() for extlinux and PXE   Simon Glass
• [PATCH 4/4] test: Make net tests depend on CONFIG_CMD_NET   Simon Glass
  • [PATCH 4/4] test: Make net tests depend on CONFIG_CMD_NET   Tom Rini
    • [PATCH 4/4] test: Make net tests depend on CONFIG_CMD_NET   Simon Glass
• [PATCH 19/21] py/tests: test_efi_selftest: Add test for counting EFI netdevices   Simon Glass
  • [PATCH 19/21] py/tests: test_efi_selftest: Add test for counting EFI netdevices   Tom Rini
    • [PATCH 19/21] py/tests: test_efi_selftest: Add test for counting EFI netdevices   Simon Glass
• [PATCH 1/1] efi_driver: create a parent device for all EFI block devices   Heinrich Schuchardt
  • [PATCH 1/1] efi_driver: create a parent device for all EFI block devices   Simon Glass
    • [PATCH 1/1] efi_driver: create a parent device for all EFI block devices   Simon Glass
  • [PATCH 1/1] efi_driver: create a parent device for all EFI block devices   Ilias Apalodimas
• [PATCH v1 0/1] video: bridge-uclass: add get_display_timing ops   Svyatoslav Ryhel
  • [PATCH v1 1/1] video: bridge-uclass: add get_display_timing ops   Svyatoslav Ryhel
    • [PATCH v1 1/1] video: bridge-uclass: add get_display_timing ops   Simon Glass
      • [PATCH v1 1/1] video: bridge-uclass: add get_display_timing ops   Svyatoslav Ryhel
      • [PATCH v1 1/1] video: bridge-uclass: add get_display_timing ops   Simon Glass
      • [PATCH v1 1/1] video: bridge-uclass: add get_display_timing ops   Svyatoslav Ryhel
      • [PATCH v1 1/1] video: bridge-uclass: add get_display_timing ops   Simon Glass
      • [PATCH v1 1/1] video: bridge-uclass: add get_display_timing ops   Svyatoslav Ryhel
      • [PATCH v1 1/1] video: bridge-uclass: add get_display_timing ops   Simon Glass
• [PATCH] efi_loader: Clean up usage of structure jmp_buf_data   Yao Zi
  • [PATCH] efi_loader: Clean up usage of structure jmp_buf_data   Heinrich Schuchardt
    • [PATCH] efi_loader: Clean up usage of structure jmp_buf_data   Yao Zi
      • [PATCH] efi_loader: Clean up usage of structure jmp_buf_data   Heinrich Schuchardt
      • [PATCH] efi_loader: Clean up usage of structure jmp_buf_data   Yao Zi
      • [PATCH] efi_loader: Clean up usage of structure jmp_buf_data   Heinrich Schuchardt
• [PATCH v1 0/1] core: ofnode: add of_graph parsing helpers   Svyatoslav Ryhel
  • [PATCH v1 1/1] core: ofnode: add of_graph parsing helpers   Svyatoslav Ryhel
    • [PATCH v1 1/1] core: ofnode: add of_graph parsing helpers   Simon Glass
      • [PATCH v1 1/1] core: ofnode: add of_graph parsing helpers   Svyatoslav Ryhel
      • [PATCH v1 1/1] core: ofnode: add of_graph parsing helpers   Simon Glass
      • [PATCH v1 1/1] core: ofnode: add of_graph parsing helpers   Svyatoslav Ryhel
• Can't get U-Boot working on Geniatech XPI-3566-ZERO   MIZSEI Zoltán
• [PATCH v2 0/1] spi: soft_spi: Add support for SPI_3WIRE   Tom Rini
• [PATCH 0/3] binman: x86: Tidy up skip-at-start settings   Simon Glass
  • [PATCH 1/3] x86: Stop working around skip-at-start   Simon Glass
  • [PATCH 2/3] binman: Read the skip-at-start value on startup   Simon Glass
  • [PATCH 3/3] binman: x86: Write skip-at-start when end-at-4gb is used   Simon Glass
• [PATCH v3 00/30] upl: Prerequite patches for updated spec   Patrick Rudolph
  • [PATCH v3 00/30] upl: Prerequite patches for updated spec   Simon Glass
• [PATCH 0/3] lmb: move lmb_map_update_notify() to EFI   Heinrich Schuchardt
  • [PATCH 1/3] lmb: avoid superfluous value check in lmb_map_update_notify()   Heinrich Schuchardt
    • [PATCH 1/3] lmb: avoid superfluous value check in lmb_map_update_notify()   Ilias Apalodimas
  • [PATCH 2/3] lmb: move lmb_map_update_notify() to EFI   Heinrich Schuchardt
    • [PATCH 2/3] lmb: move lmb_map_update_notify() to EFI   Sughosh Ganu
      • [PATCH 2/3] lmb: move lmb_map_update_notify() to EFI   Heinrich Schuchardt
    • [PATCH 2/3] lmb: move lmb_map_update_notify() to EFI   Ilias Apalodimas
    • [PATCH 2/3] lmb: move lmb_map_update_notify() to EFI   Alexander Dahl
  • [PATCH 3/3] efi_loader: make efi_add_memory_map_pg() static   Heinrich Schuchardt
    • [PATCH 3/3] efi_loader: make efi_add_memory_map_pg() static   Ilias Apalodimas
• [PATCH v2 0/2] core: ofnode: add of_graph parsing helpers   Svyatoslav Ryhel
  • [PATCH v2 1/2] core: ofnode: add of_graph parsing helpers   Svyatoslav Ryhel
  • [PATCH v2 2/2] test: dm: add ofnode_graph tests   Svyatoslav Ryhel
• [PATCH] mmc: Avoid uniniting twice   Simon Glass
• [PATCH] Revert "efi_memory: do not add U-Boot memory to the memory map"   Simon Glass
  • [PATCH] Revert "efi_memory: do not add U-Boot memory to the memory map"   Tom Rini
    • [PATCH] Revert "efi_memory: do not add U-Boot memory to the memory map"   Simon Glass
• [PATCH] Gitlab: Add missing symlink for qemu_arm64_lwip boardenv file   Tom Rini
  • [PATCH] Gitlab: Add missing symlink for qemu_arm64_lwip boardenv file   Jerome Forissier
  • [PATCH] Gitlab: Add missing symlink for qemu_arm64_lwip boardenv file   Tom Rini
• [PATCH v1 0/1] tegra20: add Acer Iconia Tab A500 support   Svyatoslav Ryhel
  • [PATCH v1 1/1] board: acer: picasso: add Acer Iconia Tab A500 support   Svyatoslav Ryhel
    • [PATCH v1 1/1] board: acer: picasso: add Acer Iconia Tab A500 support   Quentin Schulz
      • [PATCH v1 1/1] board: acer: picasso: add Acer Iconia Tab A500 support   Svyatoslav Ryhel
      • [PATCH v1 1/1] board: acer: picasso: add Acer Iconia Tab A500 support   Quentin Schulz
      • [PATCH v1 1/1] board: acer: picasso: add Acer Iconia Tab A500 support   Svyatoslav Ryhel
• [PATCH v2 00/28] x86: Improve operation under QEMU   Simon Glass
  • [PATCH v2 01/28] x86: Expand x86_64 early memory   Simon Glass
  • [PATCH v2 02/28] x86: qemu: Switch to bochs display   Simon Glass
  • [PATCH v2 03/28] x86: qemu: Enable dhrystone   Simon Glass
  • [PATCH v2 04/28] x86: qemu: Avoid accessing BSS too early   Simon Glass
  • [PATCH v2 05/28] x86: Drop mpspec from the SPL build   Simon Glass
  • [PATCH v2 06/28] x86: Add some log categories   Simon Glass
  • [PATCH v2 07/28] x86: Drop use of CONFIG_REALMODE_DEBUG   Simon Glass
  • [PATCH v2 08/28] x86: Avoid clearing the VESA display   Simon Glass
  • [PATCH v2 09/28] x86: Add 64-bit entries to the GDT   Simon Glass
  • [PATCH v2 10/28] x86: Use defines for the cache flags   Simon Glass
  • [PATCH v2 11/28] x86: spl: Drop duplicate CPU init   Simon Glass
  • [PATCH v2 12/28] x86: Drop the message about features missing in 64-bit   Simon Glass
  • [PATCH v2 13/28] x86: Include stdbool.h in interrupt header   Simon Glass
  • [PATCH v2 14/28] x86: Tidy up the GDT size in start/16.S   Simon Glass
  • [PATCH v2 15/28] x86: Disable paging before changing to long mode   Simon Glass
  • [PATCH v2 16/28] x86: Use the same GDT when jumping to long mode   Simon Glass
  • [PATCH v2 17/28] x86: Use a simple jump into long mode   Simon Glass
  • [PATCH v2 18/28] x86: Rename the _D dirty flag   Simon Glass
  • [PATCH v2 19/28] x86: Support CPU functions in long mode   Simon Glass
  • [PATCH v2 20/28] x86: Tidy up address size in MTRR calculations   Simon Glass
  • [PATCH v2 21/28] Add a 64-bit version of is_power_of_2()   Simon Glass
  • [PATCH v2 22/28] x86: Support MTRRs of 4GB on 32-bit machines   Simon Glass
  • [PATCH v2 23/28] x86: emulation: Set an MTRR for the RAM   Simon Glass
  • [PATCH v2 24/28] scripts: Expand a few options   Simon Glass
  • [PATCH v2 25/28] test/py: Add a helper to send characters   Simon Glass
  • [PATCH v2 26/28] test/py: Allow tests to be filtered by role   Simon Glass
    • [PATCH v2 26/28] test/py: Allow tests to be filtered by role   Tom Rini
      • [PATCH v2 26/28] test/py: Allow tests to be filtered by role   Simon Glass
      • [PATCH v2 26/28] test/py: Allow tests to be filtered by role   Tom Rini
      • [PATCH v2 26/28] test/py: Allow tests to be filtered by role   Simon Glass
      • [PATCH v2 26/28] test/py: Allow tests to be filtered by role   Tom Rini
      • [PATCH v2 26/28] test/py: Allow tests to be filtered by role   Simon Glass
      • [PATCH v2 26/28] test/py: Allow tests to be filtered by role   Tom Rini
      • [PATCH v2 26/28] test/py: Allow tests to be filtered by role   Simon Glass
  • [PATCH v2 27/28] RFC: test/py: Deal with timeouts   Simon Glass
    • [PATCH v2 27/28] RFC: test/py: Deal with timeouts   Tom Rini
  • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
    • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Heiko Schocher
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Heiko Schocher
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Heiko Schocher
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
      • [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Heiko Schocher
  • [PATCH v2 00/28] x86: Improve operation under QEMU   Paolo Bonzini
    • [PATCH v2 00/28] x86: Improve operation under QEMU   Simon Glass
  • [PATCH v2 00/28] x86: Improve operation under QEMU   Tom Rini
    • [PATCH v2 00/28] x86: Improve operation under QEMU   Simon Glass
      • [PATCH v2 00/28] x86: Improve operation under QEMU   Tom Rini
• [PATCH 0/2] net: tsec: Improve receive error path   J. Neuschäfer via B4 Relay
  • [PATCH 1/2] net: tsec: Reorder tsec_recv and tsec_free_pkt   J. Neuschäfer via B4 Relay
  • [PATCH 2/2] net: tsec: Re-arm packet buffer in error case   J. Neuschäfer via B4 Relay
• [XGMAC dt bindings v1 1/1] dt: net: add DWC XGMAC binding   Ng, Boon Khai
  • [XGMAC dt bindings v1 1/1] dt: net: add DWC XGMAC binding   Tom Rini
    • [XGMAC dt bindings v1 1/1] dt: net: add DWC XGMAC binding   Ng, Boon Khai
      • [XGMAC dt bindings v1 1/1] dt: net: add DWC XGMAC binding   Tom Rini
• [PATCH] configs: j784s4-am69: Enable UFS   Udit Kumar
• [PATCH 0/2] arm: mach-k3: j722s: Enable ESM to support watchdogs   Keerthy
  • [PATCH 1/2] arm: mach-k3: j722s: Initialize MCU & MAIN Domain ESMs   Keerthy
    • [PATCH 1/2] arm: mach-k3: j722s: Initialize MCU & MAIN Domain ESMs   Kumar, Udit
  • [PATCH 2/2] configs: j722s_evm_r5_defconfig: Enable the ESM Configs to support watchdog   Keerthy
• [PATCH] gpio: 74x146: depend on DM_SPI   J. Neuschäfer via B4 Relay
• [PATCH v2 2/3] common: board: make initcalls static   Jerome Forissier
• [PATCH] board: freescale: fix LS1021a build   blemouzy.ml at gmail.com
  • [PATCH] board: freescale: fix LS1021a build   Peng Fan
    • [PATCH] board: freescale: fix LS1021a build   Benjamin Lemouzy
• [PATCH 0/2] PowerPC MPC8xxx compile-time checks   J. Neuschäfer via B4 Relay
  • [PATCH 1/2] powerpc: mpc83xx: Check the size of peripheral structs   J. Neuschäfer via B4 Relay
• [PATCH 2/2] powerpc: mpc8xxx_spi: Catch bad chip variants earlier   J. Neuschäfer via B4 Relay
• [PATCH 1/3] ARM: dts: stm32: drop "st,button1" compatible   Dario Binacchi
  • [PATCH 2/3] ARM: dts: stm32: drop "st,led1" compatible   Dario Binacchi
    • [PATCH 2/3] ARM: dts: stm32: drop "st,led1" compatible   Patrice CHOTARD
  • [PATCH 3/3] board: stm32f746-disco: drop board_late_init()   Dario Binacchi
    • [PATCH 3/3] board: stm32f746-disco: drop board_late_init()   Patrice CHOTARD
  • [PATCH 1/3] ARM: dts: stm32: drop "st,button1" compatible   Patrice CHOTARD
• [PATCH v2 0/6] This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().   Gabriel Dalimonte
  • [PATCH v2 1/6] fs: fat: factor out dentry link create/delete   Gabriel Dalimonte
  • [PATCH v2 2/6] fs: add rename infrastructure   Gabriel Dalimonte
    • [PATCH v2 2/6] fs: add rename infrastructure   Ilias Apalodimas
  • [PATCH v2 3/6] fs: fat: add rename   Gabriel Dalimonte
  • [PATCH v2 4/6] fs: fat: update parent dirs metadata on dentry create/delete   Gabriel Dalimonte
  • [PATCH v2 5/6] efi_loader: move path out of file_handle   Gabriel Dalimonte
    • [PATCH v2 5/6] efi_loader: move path out of file_handle   Ilias Apalodimas
  • [PATCH v2 6/6] efi_loader: support file rename in SetInfo()   Gabriel Dalimonte
    • [PATCH v2 6/6] efi_loader: support file rename in SetInfo()   Ilias Apalodimas
      • [PATCH v2 6/6] efi_loader: support file rename in SetInfo()   Ilias Apalodimas
• [PATCH u-boot-test-hooks] py/konsulko-labgrid: Add sample rpi_arm64 / rpi_4 boardenv file   Tom Rini
  • [PATCH u-boot-test-hooks] py/konsulko-labgrid: Add sample rpi_arm64 / rpi_4 boardenv file   Tom Rini
• [PATCH v4 0/5] boards: siemens: iot2050: SM variant, sysinfo support, fixes & cleanups   Baocheng Su
  • [PATCH v4 1/5] smbios: Fill UUID from sysinfo when available   Baocheng Su
  • [PATCH v4 2/5] sysinfo: Add API for accessing data elements   Baocheng Su
  • [PATCH v4 3/5] sysinfo: Add SYSID_BOARD_RAM_SIZE_MB   Baocheng Su
  • [PATCH v4 4/5] sysinfo: Add driver for IOT2050 boards   Baocheng Su
  • [PATCH v4 5/5] board: siemens: iot2050: Use sysinfo for board initialization   Baocheng Su
  • [PATCH v4 0/5] boards: siemens: iot2050: SM variant, sysinfo support, fixes & cleanups   Tom Rini
• [PATCH 00/10] Add Synopsys MIPI I3C Driver support   dinesh.maniyam at intel.com
  • [PATCH 01/10] dt-bindings: i3c: Add YAML schema for Cadence I3C controller   dinesh.maniyam at intel.com
    • [PATCH 01/10] dt-bindings: i3c: Add YAML schema for Cadence I3C controller   Michal Simek
      • [PATCH 01/10] dt-bindings: i3c: Add YAML schema for Cadence I3C controller   Maniyam, Dinesh
    • [PATCH 01/10] dt-bindings: i3c: Add YAML schema for Cadence I3C controller   Frank Li
      • [PATCH 01/10] dt-bindings: i3c: Add YAML schema for Cadence I3C controller   Maniyam, Dinesh
    • [PATCH 01/10] dt-bindings: i3c: Add YAML schema for Cadence I3C controller   Tom Rini
      • [PATCH 01/10] dt-bindings: i3c: Add YAML schema for Cadence I3C controller   Maniyam, Dinesh
  • [PATCH 02/10] drivers: i3c: Add new i3c uclass id   dinesh.maniyam at intel.com
    • [PATCH 02/10] drivers: i3c: Add new i3c uclass id   Simon Glass
      • [PATCH 02/10] drivers: i3c: Add new i3c uclass id   Maniyam, Dinesh
  • [PATCH 03/10] drivers: i3c: Add driver for MIPI DWI3C   dinesh.maniyam at intel.com
  • [PATCH 04/10] drivers: Enabled Kconfig and Makefile for I3C support   dinesh.maniyam at intel.com
  • [PATCH 05/10] drivers: i3c: Enabled Kconfig and Makefile for DWI3C   dinesh.maniyam at intel.com
  • [PATCH 06/10] drivers: i3c: Add i3c uclass driver.   dinesh.maniyam at intel.com
  • [PATCH 07/10] drivers: i3c: master: Enable probe i3c without slave device   dinesh.maniyam at intel.com
  • [PATCH 08/10] i3c: master: dw-i3c-master: Fix OD_TIMING for spike filter   dinesh.maniyam at intel.com
  • [PATCH 09/10] cmd: Add i3c command support.   dinesh.maniyam at intel.com
    • [PATCH 09/10] cmd: Add i3c command support.   Simon Glass
      • [PATCH 09/10] cmd: Add i3c command support.   Maniyam, Dinesh
  • [PATCH 10/10] cmd: Enabled Kconfig and Makefile for DWI3C cmd support   dinesh.maniyam at intel.com
• [PATCH] clk: versal: Store driver data in data section   Padmarao Begari
  • [PATCH] clk: versal: Store driver data in data section   Michal Simek
• [PATCH v2 00/26] SoCFPGA: Add Boot Support for Agilex 5 in U-Boot   alif.zakuan.yuslaimi at intel.com
  • [PATCH v2 01/26] arm: socfpga: agilex5: Add new driver model for system manager in Agilex5   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 01/26] arm: socfpga: agilex5: Add new driver model for system manager in Agilex5   Chee, Tien Fong
  • [PATCH v2 02/26] arm: socfpga: misc: Exclude Agilex5 from clock manager base address retrieval   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 02/26] arm: socfpga: misc: Exclude Agilex5 from clock manager base address retrieval   Chee, Tien Fong
  • [PATCH v2 03/26] drivers: clk: agilex5: Configure intosc as boot_clk source   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 03/26] drivers: clk: agilex5: Configure intosc as boot_clk source   Chee, Tien Fong
  • [PATCH v2 04/26] drivers: clk: agilex5: Replace status polling with wait_for_bit_le32()   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 04/26] drivers: clk: agilex5: Replace status polling with wait_for_bit_le32()   Chee, Tien Fong
  • [PATCH v2 05/26] drivers: clk: agilex5: Set PLL to asynchronous mode   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 05/26] drivers: clk: agilex5: Set PLL to asynchronous mode   Chee, Tien Fong
  • [PATCH v2 06/26] arm: socfpga: agilex5: Add warm reset mask for Agilex5   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 06/26] arm: socfpga: agilex5: Add warm reset mask for Agilex5   Chee, Tien Fong
  • [PATCH v2 07/26] arm: socfpga: Disable GIC for Agilex5   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 07/26] arm: socfpga: Disable GIC for Agilex5   Chee, Tien Fong
  • [PATCH v2 08/26] arm: socfpga: Add handoff data support for SoCFPGA Agilex5 device   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 08/26] arm: socfpga: Add handoff data support for SoCFPGA Agilex5 device   Chee, Tien Fong
  • [PATCH v2 09/26] arm: dts: agilex5: Add HPS cache coherency unit configuration settings   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 09/26] arm: dts: agilex5: Add HPS cache coherency unit configuration settings   Chee, Tien Fong
  • [PATCH v2 10/26] arm: dts: agilex5: Add firewall configure settings   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 10/26] arm: dts: agilex5: Add firewall configure settings   Chee, Tien Fong
  • [PATCH v2 11/26] arm: dts: agilex5: Enable XGMAC   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 11/26] arm: dts: agilex5: Enable XGMAC   Chee, Tien Fong
  • [PATCH v2 12/26] arch: arm: Enable PSCI reset driver for Agilex5   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 12/26] arch: arm: Enable PSCI reset driver for Agilex5   Chee, Tien Fong
  • [PATCH v2 13/26] arm: socfpga: agilex5: Enable cache flush for system memory cache in CCU   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 13/26] arm: socfpga: agilex5: Enable cache flush for system memory cache in CCU   Chee, Tien Fong
  • [PATCH v2 14/26] arm: socfpga: agilex5: Add SMMU initialization   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 14/26] arm: socfpga: agilex5: Add SMMU initialization   Chee, Tien Fong
  • [PATCH v2 15/26] arm: socfpga: agilex5: Update CPU info   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 15/26] arm: socfpga: agilex5: Update CPU info   Chee, Tien Fong
  • [PATCH v2 16/26] arm: socfpga: Export board ID as U-Boot environment   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 16/26] arm: socfpga: Export board ID as U-Boot environment   Chee, Tien Fong
  • [PATCH v2 17/26] configs: agilex5: Add configuration for malloc pool   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 17/26] configs: agilex5: Add configuration for malloc pool   Chee, Tien Fong
  • [PATCH v2 18/26] arm: socfpga: smc: Add memory coherency support to mailbox command   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 18/26] arm: socfpga: smc: Add memory coherency support to mailbox command   Chee, Tien Fong
  • [PATCH v2 19/26] ddr: altera: Add DDR driver for Agilex5 series   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 19/26] ddr: altera: Add DDR driver for Agilex5 series   Chee, Tien Fong
  • [PATCH v2 20/26] arm: socfpga: agilex5: Add SPL for Agilex5 SoCFPGA   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 20/26] arm: socfpga: agilex5: Add SPL for Agilex5 SoCFPGA   Chee, Tien Fong
  • [PATCH v2 21/26] arm: armv8: Improve SPL data save and restore implementation   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 21/26] arm: armv8: Improve SPL data save and restore implementation   Chee, Tien Fong
  • [PATCH v2 22/26] configs: socfpga: soc64: agilex5: Use common ARMv8 linker script   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 22/26] configs: socfpga: soc64: agilex5: Use common ARMv8 linker script   Chee, Tien Fong
  • [PATCH v2 23/26] configs: socfpga: soc64: agilex5: Enable XGMAC   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 23/26] configs: socfpga: soc64: agilex5: Enable XGMAC   Chee, Tien Fong
  • [PATCH v2 24/26] arm: socfpga: soc64: Add support for board_boot_order()   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 24/26] arm: socfpga: soc64: Add support for board_boot_order()   Chee, Tien Fong
  • [PATCH v2 25/26] configs: socfpga: soc64: agilex5: Enable QSPI boot with UBI / UBIFS   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 25/26] configs: socfpga: soc64: agilex5: Enable QSPI boot with UBI / UBIFS   Chee, Tien Fong
  • [PATCH v2 26/26] configs: agilex5: Enable watchdog autostart   alif.zakuan.yuslaimi at intel.com
    • [PATCH v2 26/26] configs: agilex5: Enable watchdog autostart   Chee, Tien Fong
• [PATCH v3 0/8] Add initial support for IPQ9574 based boards   Varadarajan Narayanan
  • [PATCH v3 1/8] doc: board/qualcomm: document RDP building/flashing   Varadarajan Narayanan
    • [PATCH v3 1/8] doc: board/qualcomm: document RDP building/flashing   Caleb Connolly
      • [PATCH v3 1/8] doc: board/qualcomm: document RDP building/flashing   Varadarajan Narayanan
  • [PATCH v3 2/8] dts: ipq9574-rdp433-u-boot: add override dtsi   Varadarajan Narayanan
    • [PATCH v3 2/8] dts: ipq9574-rdp433-u-boot: add override dtsi   Caleb Connolly
      • [PATCH v3 2/8] dts: ipq9574-rdp433-u-boot: add override dtsi   Varadarajan Narayanan
  • [PATCH v3 3/8] clk/qcom: add initial clock driver for ipq9574   Varadarajan Narayanan
  • [PATCH v3 4/8] pinctrl: qcom: Handle get_function_mux failure   Varadarajan Narayanan
  • [PATCH v3 5/8] pinctrl: qcom: Add ipq9574 pinctrl driver   Varadarajan Narayanan
  • [PATCH v3 6/8] mmc: msm_sdhci: Reset clocks before reconfiguration   Varadarajan Narayanan
  • [PATCH v3 7/8] qcom_defconfig: enable ipq9574 clock & pinctrl driver   Varadarajan Narayanan
    • [PATCH v3 7/8] qcom_defconfig: enable ipq9574 clock & pinctrl driver   Sumit Garg
  • [PATCH v3 8/8] configs: add qcom_ipq9574_mmc_defconfig   Varadarajan Narayanan
    • [PATCH v3 8/8] configs: add qcom_ipq9574_mmc_defconfig   Sumit Garg
      • [PATCH v3 8/8] configs: add qcom_ipq9574_mmc_defconfig   Varadarajan Narayanan
• [PATCH] dma: ti: k3-udma: Avoid Memory leak issues during dma memcpy   Prasanth Babu Mantena
• [PATCH 0/2] J784S4: Enable USB DFU boot, DFU flash and UMS configs   Siddharth Vadapalli
  • [PATCH 1/2] configs: j784s4_evm_r5_defconfig: enable USB DFU boot   Siddharth Vadapalli
  • [PATCH 2/2] configs: j784s4_evm_a72_defconfig: enable USB DFU boot, DFU flash and UMS   Siddharth Vadapalli
• 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Alice Guo (OSS)
  • Re: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Marek Vasut
    • 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Alice Guo (OSS)
      • Re: 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Marek Vasut
      • 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Peng Fan
      • Re: 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Marek Vasut
• [PATCH v5 00/20] imx: add i.MX95 support   Alice Guo (OSS)
  • [PATCH v5 01/20] mailbox: add i.MX Messaging Unit (MU) driver   Alice Guo (OSS)
  • [PATCH v5 02/20] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
  • [PATCH v5 03/20] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
  • [PATCH v5 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Alice Guo (OSS)
  • [PATCH v5 05/20] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Alice Guo (OSS)
  • [PATCH v5 06/20] scmi_protocols: add SCMI Performance domain management protocol message IDs   Alice Guo (OSS)
  • [PATCH v5 07/20] clk: scmi: add the command CLOCK_PARENT_SET   Alice Guo (OSS)
  • [PATCH v5 08/20] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo (OSS)
  • [PATCH v5 09/20] sandbox: add SCMI clock control permissions to sandbox   Alice Guo (OSS)
  • [PATCH v5 10/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
  • [PATCH v5 11/20] imx9: scmi: add i.MX95 SoC and clock related code   Alice Guo (OSS)
  • [PATCH v5 12/20] spl: imx: use trampoline buffer to load images to secure region   Alice Guo (OSS)
  • [PATCH v5 13/20] imx9: add i.MX95 Kconfig and Makefile   Alice Guo (OSS)
  • [PATCH v5 14/20] imx: Kconfig: IMX8_ROMAPI is not configured for i.MX95   Alice Guo (OSS)
  • [PATCH v5 15/20] binman: add a new entry type for packing DDR PHY firmware images   Alice Guo (OSS)
    • [PATCH v5 15/20] binman: add a new entry type for packing DDR PHY firmware images   Simon Glass
  • [PATCH v5 16/20] tools: imx8image: add i.MX95 support   Alice Guo (OSS)
  • [PATCH v5 17/20] imx: add V2X container support on i.MX95   Alice Guo (OSS)
  • [PATCH v5 18/20] doc: imx: add document for i.MX95 Image Container Format   Alice Guo (OSS)
  • [PATCH v5 19/20] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
    • [PATCH v5 19/20] imx95_evk: add i.MX95 19x19 EVK board basic support   Fabio Estevam
  • [PATCH v5 20/20] Makefile: add some files to CLEAN_FILES   Alice Guo (OSS)
• [PULL next] u-boot-at91-2025.07-a   Eugen Hristev
  • [PULL next] u-boot-at91-2025.07-a   Tom Rini
• [PATCH] versal2: Fix .*get_bootmode function name   Michal Simek
  • [PATCH] versal2: Fix .*get_bootmode function name   Michal Simek
• [PATCH] arm64: versal2: Show major and minor silicon version   Michal Simek
  • [PATCH] arm64: versal2: Show major and minor silicon version   Michal Simek
• [PATCH] serial: ns16550: Fix pointer type mismatch   J. Neuschäfer via B4 Relay
  • [PATCH] serial: ns16550: Fix pointer type mismatch   Tom Rini
• [PATCH] common: board_r: Initialize interrupts before watchdog   J. Neuschäfer via B4 Relay
  • [PATCH] common: board_r: Initialize interrupts before watchdog   Simon Glass
    • [PATCH] common: board_r: Initialize interrupts before watchdog   J. Neuschäfer
      • [PATCH] common: board_r: Initialize interrupts before watchdog   Simon Glass
      • PowerPC MPC83XX timer issues (Re: [PATCH] common: board_r: Initialize interrupts before watchdog)   J. Neuschäfer
• [PATCH v3 0/2] core: ofnode: add of_graph parsing helpers   Svyatoslav Ryhel
  • [PATCH v3 1/2] core: ofnode: add of_graph parsing helpers   Svyatoslav Ryhel
  • [PATCH v3 2/2] test: dm: add ofnode_graph tests   Svyatoslav Ryhel
• Reminder: Next U-Boot community meeting 25 February 2025 (-0600)   Tom Rini
• Invitation: U-Boot community meeting @ Every 2 weeks from 10am to 11am on Tuesday (EST) (u-boot at lists.denx.de)   Jesse T
• [PATCH] fs/squashfs: fix potential integer overflows   joaomarcos.costa at bootlin.com
  • [PATCH] fs/squashfs: fix potential integer overflows   Tom Rini
• [PATCH v2 00/13] Add support for Ethboot for AM68-SK AM62p-SK   Chintan Vankar
  • [PATCH v2 01/13] net: tftp: Increase TFTP pkt string length to include null character   Chintan Vankar
    • [PATCH v2 01/13] net: tftp: Increase TFTP pkt string length to include null character   Sverdlin, Alexander
    • [PATCH v2 01/13] net: tftp: Increase TFTP pkt string length to include null character   Vankar, Chintan
      • [PATCH v2 01/13] net: tftp: Increase TFTP pkt string length to include null character   Sverdlin, Alexander
      • [PATCH v2 01/13] net: tftp: Increase TFTP pkt string length to include null character   Sverdlin, Alexander
  • [PATCH v2 03/13] arm: mach-k3: am62x: am625_init: Remove explicit probing of CPSW driver   Chintan Vankar
  • [PATCH v2 04/13] arm: mach-k3: j721s2: Update SoC auto-gen data to enable Ethernet boot   Chintan Vankar
  • [PATCH v2 05/13] arm: mach-k3: j721s2_spl: Alias Ethernet boot to CPGMAC   Chintan Vankar
  • [PATCH v2 06/13] configs: am68: Add configs for enabling Ethboot in R5SPL   Chintan Vankar
    • [PATCH v2 06/13] configs: am68: Add configs for enabling Ethboot in R5SPL   Andrew Davis
  • [PATCH v2 07/13] configs: am68: Enable configs required for Ethernet boot   Chintan Vankar
  • [PATCH v2 08/13] arm: dts: k3-am68-sk-base-board-u-boot: Add bootph-all property to necessary nodes   Chintan Vankar
    • [PATCH v2 08/13] arm: dts: k3-am68-sk-base-board-u-boot: Add bootph-all property to necessary nodes   Sverdlin, Alexander
  • [PATCH v2 09/13] arm: mach-k3: am62p: Update SoC auto-gen data to enable CPSW boot   Chintan Vankar
  • [PATCH v2 10/13] board: ti: am62px: evm: Enable cache for AM62p   Chintan Vankar
    • [PATCH v2 10/13] board: ti: am62px: evm: Enable cache for AM62p   Sverdlin, Alexander
  • [PATCH v2 11/13] configs: am62p: Add configs for enabling ETHBOOT in R5SPL   Chintan Vankar
  • [PATCH v2 12/13] configs: am62p: Enable configs required for Ethboot   Chintan Vankar
  • [PATCH v2 13/13] arch: arm: dts: k3-am62p5-sk-u-boot: Add bootph-all property to necessary nodes   Chintan Vankar
    • [PATCH v2 13/13] arch: arm: dts: k3-am62p5-sk-u-boot: Add bootph-all property to necessary nodes   Sverdlin, Alexander
• [PATCH v2 02/13] net: ti: am65-cpsw-nuss: Define and switch to bind method for CPSW driver   Chintan Vankar
  • [PATCH v2 02/13] net: ti: am65-cpsw-nuss: Define and switch to bind method for CPSW driver   Sverdlin, Alexander
    • [PATCH v2 02/13] net: ti: am65-cpsw-nuss: Define and switch to bind method for CPSW driver   Chintan Vankar
• [PATCH] tools: Fix pylint 3.3.4 errors   Simon Glass
  • [PATCH] tools: Fix pylint 3.3.4 errors   Tom Rini
• [PATCH] pinctrl: rockchip: rk3328: Fix pinmux for GPIO2-B and GPIO3-B pins   Kever Yang
• [PATCH v2 1/2] bloblist: refactor xferlist and bloblist   Raymond Mao
  • [PATCH v2 2/2] bloblist: kconfig for mandatory incoming standard passage   Raymond Mao
  • [PATCH v2 1/2] bloblist: refactor xferlist and bloblist   Tom Rini
• Pull request: u-boot-rockchip-20250220   Kever Yang
  • Pull request: u-boot-rockchip-20250220   Tom Rini
• [PATCH v4 0/8] Add initial support for IPQ9574 based boards   Varadarajan Narayanan
  • [PATCH v4 1/7] doc: board/qualcomm: document RDP building/flashing   Varadarajan Narayanan
    • [PATCH v4 1/7] doc: board/qualcomm: document RDP building/flashing   Caleb Connolly
  • [PATCH v4 2/7] dts: ipq9574-rdp433-u-boot: add override dtsi   Varadarajan Narayanan
    • [PATCH v4 2/7] dts: ipq9574-rdp433-u-boot: add override dtsi   Caleb Connolly
      • [PATCH v4 2/7] dts: ipq9574-rdp433-u-boot: add override dtsi   Varadarajan Narayanan
  • [PATCH v4 3/7] clk/qcom: add initial clock driver for ipq9574   Varadarajan Narayanan
  • [PATCH v4 4/7] pinctrl: qcom: Handle get_function_mux failure   Varadarajan Narayanan
  • [PATCH v4 5/7] pinctrl: qcom: Add ipq9574 pinctrl driver   Varadarajan Narayanan
    • [PATCH v4 5/7] pinctrl: qcom: Add ipq9574 pinctrl driver   Caleb Connolly
  • [PATCH v4 6/7] mmc: msm_sdhci: Reset clocks before reconfiguration   Varadarajan Narayanan
  • [PATCH v4 7/7] configs: add qcom_ipq9574_mmc_defconfig   Varadarajan Narayanan
    • [PATCH v4 7/7] configs: add qcom_ipq9574_mmc_defconfig   Sumit Garg
• [PATCH] lib: uuid: support more efi protocols in uuid_guid_get_str()   Heinrich Schuchardt
  • [PATCH] lib: uuid: support more efi protocols in uuid_guid_get_str()   Ilias Apalodimas
• [PATCH v3 2/2] efi_loader: efi_net: let efi_net_set_dp properly update the device path   Heinrich Schuchardt
  • [PATCH v3 2/2] efi_loader: efi_net: let efi_net_set_dp properly update the device path   Adriano Córdova
    • [PATCH v3 2/2] efi_loader: efi_net: let efi_net_set_dp properly update the device path   Adriano Córdova
• [PATCH v2 0/6] lmb: miscellaneous fixes and improvements   Sughosh Ganu
  • [PATCH v2 1/6] lmb: check if a region can be reserved by lmb_reserve()   Sughosh Ganu
    • [PATCH v2 1/6] lmb: check if a region can be reserved by lmb_reserve()   Heinrich Schuchardt
  • [PATCH v2 2/6] lmb: handle scenario of encompassing overlap   Sughosh Ganu
    • [PATCH v2 2/6] lmb: handle scenario of encompassing overlap   Heinrich Schuchardt
  • [PATCH v2 3/6] lmb: check for a region's coalescing with all existing regions   Sughosh Ganu
    • [PATCH v2 3/6] lmb: check for a region's coalescing with all existing regions   Heinrich Schuchardt
  • [PATCH v2 4/6] lmb: remove superfluous address overlap check from lmb_add_region_flags()   Sughosh Ganu
    • [PATCH v2 4/6] lmb: remove superfluous address overlap check from lmb_add_region_flags()   Heinrich Schuchardt
      • [PATCH v2 4/6] lmb: remove superfluous address overlap check from lmb_add_region_flags()   Sughosh Ganu
  • [PATCH v2 5/6] lmb: use a common function to check if regions overlap or are adjacent   Sughosh Ganu
  • [PATCH v2 6/6] lmb: optimise the lmb allocation functions   Sughosh Ganu
    • [PATCH v2 6/6] lmb: optimise the lmb allocation functions   Heinrich Schuchardt
      • [PATCH v2 6/6] lmb: optimise the lmb allocation functions   Sughosh Ganu
• [PATCH 1/1] scripts: typos in event_dump.py   Heinrich Schuchardt
• [PATCH] configs: am65x_evm_r5_usbdfu_defconfig: Fix USB DFU boot   Siddharth Vadapalli
  • [PATCH] configs: am65x_evm_r5_usbdfu_defconfig: Fix USB DFU boot   Hrushikesh Salunke
    • [PATCH] configs: am65x_evm_r5_usbdfu_defconfig: Fix USB DFU boot   Tom Rini
      • [EXTERNAL] Re: [PATCH] configs: am65x_evm_r5_usbdfu_defconfig: Fix USB DFU boot   Hrushikesh Salunke
• [PATCH] riscv: timer: Add thead,c900-clint compatible   Yao Zi
  • [PATCH] riscv: timer: Add thead,c900-clint compatible   Yao Zi
• [PATCH] dt-bindings: trivial-devices: Add ti,tps53681   Michal Simek
  • [PATCH] dt-bindings: trivial-devices: Add ti,tps53681   Rob Herring (Arm)
• [PATCH] tiny-printf: emit \0 as %c   A. Sverdlin
• [PATCH v2] dma: ti: k3-udma: Avoid Memory leak issues during dma memcpy   Prasanth Babu Mantena
  • [PATCH v2] dma: ti: k3-udma: Avoid Memory leak issues during dma memcpy   Tom Rini
• [PATCH v2 0/6] Fix page permission on arm64 architectures   Ilias Apalodimas
  • [PATCH v2 1/6] meminfo: add memory details for armv8   Ilias Apalodimas
  • [PATCH v2 2/6] doc: update meminfo with arch specific information   Ilias Apalodimas
  • [PATCH v2 3/6] arm: Prepare linker scripts for memory permissions   Ilias Apalodimas
    • [PATCH v2 3/6] arm: Prepare linker scripts for memory permissions   Richard Henderson
  • [PATCH v2 4/6] arm64: mmu_change_region_attr() add an option not to break PTEs   Ilias Apalodimas
    • [PATCH v2 4/6] arm64: mmu_change_region_attr() add an option not to break PTEs   Richard Henderson
  • [PATCH v2 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
    • [PATCH v2 5/6] treewide: Add a function to change page permissions   Richard Henderson
    • [PATCH v2 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
  • [PATCH v2 6/6] arm64: Enable RW, RX and RO mappings for the relocated binary   Ilias Apalodimas
    • [PATCH v2 6/6] arm64: Enable RW, RX and RO mappings for the relocated binary   Richard Henderson
• [PATCH] spi: cadence_ospi: Add device reset via OSPI controller   Venkatesh Yadav Abbarapu
• [PATCH 1/1] mtd: mtdpart: Support MTD_SIZE_REMAINING with unallocated memory area   Alexander Stein
  • [PATCH 1/1] mtd: mtdpart: Support MTD_SIZE_REMAINING with unallocated memory area   Tom Rini
• Pull request efi-2025-04-rc3   Heinrich Schuchardt
  • Pull request efi-2025-04-rc3   Tom Rini
• [PATCH v2 0/3] rockchip: remove u-boot.rom generation and use binaries from simple-bin in simple-bin-spi image   Quentin Schulz
  • [PATCH v2 1/3] rockchip: rk3399: do not generate u-boot.rom anymore   Quentin Schulz
    • [PATCH v2 1/3] rockchip: rk3399: do not generate u-boot.rom anymore   Simon Glass
  • [PATCH v2 2/3] rockchip: rk3288: do not generate u-boot.rom anymore   Quentin Schulz
    • [PATCH v2 2/3] rockchip: rk3288: do not generate u-boot.rom anymore   Simon Glass
  • [PATCH v2 3/3] rockchip: avoid rebuilding most binaries for u-boot-rockchip-spi.bin   Quentin Schulz
    • [PATCH v2 3/3] rockchip: avoid rebuilding most binaries for u-boot-rockchip-spi.bin   Simon Glass
• [PATCH v2 0/3] video: bridge-uclass: add get_display_timing ops   Svyatoslav Ryhel
  • [PATCH v2 1/3] video: bridge-uclass: add get_display_timing ops   Svyatoslav Ryhel
    • [PATCH v2 1/3] video: bridge-uclass: add get_display_timing ops   Dang Huynh
  • [PATCH v2 2/3] video: bridge: add transparent LVDS de/encoder bridge   Svyatoslav Ryhel
  • [PATCH v2 3/3] test: dm: add video bridge tests   Svyatoslav Ryhel
• [PATCH v4] rockchip: rk3308-rock-s0: Fix SD-card boot on v1.1 hw revision   Jonas Karlman
• [PATCH 00/12] Support to run U-Boot on sc7180 Trogdor Chromebooks   Stephen Boyd
  • [PATCH 01/12] clk: qcom: Add driver for sc7180   Stephen Boyd
  • [PATCH 02/12] pinctrl: qcom: Add driver for sc7180   Stephen Boyd
  • [PATCH 03/12] spi: Add Qualcomm GENI SPI driver   Stephen Boyd
  • [PATCH 04/12] coreboot: Move coreboot logic out of x86 to a generic place   Stephen Boyd
    • [PATCH 04/12] coreboot: Move coreboot logic out of x86 to a generic place   Tom Rini
      • [PATCH 04/12] coreboot: Move coreboot logic out of x86 to a generic place   Stephen Boyd
      • [PATCH 04/12] coreboot: Move coreboot logic out of x86 to a generic place   Caleb Connolly
      • [PATCH 04/12] coreboot: Move coreboot logic out of x86 to a generic place   Simon Glass
  • [PATCH 05/12] arm: Support running U-Boot as a coreboot payload on ARM64   Stephen Boyd
    • [PATCH 05/12] arm: Support running U-Boot as a coreboot payload on ARM64   Tom Rini
      • [PATCH 05/12] arm: Support running U-Boot as a coreboot payload on ARM64   Stephen Boyd
      • [PATCH 05/12] arm: Support running U-Boot as a coreboot payload on ARM64   Tom Rini
  • [PATCH 06/12] cmd/cbsysinfo: Skip the CMOS 'option_table' if it isn't present   Stephen Boyd
  • [PATCH 07/12] cmd/cbsysinfo: Allow on ARM as well   Stephen Boyd
    • [PATCH 07/12] cmd/cbsysinfo: Allow on ARM as well   Tom Rini
      • [PATCH 07/12] cmd/cbsysinfo: Allow on ARM as well   Stephen Boyd
  • [PATCH 08/12] coreboot: Parse sku_id/fw_config from coreboot tables   Stephen Boyd
  • [PATCH 09/12] pstore: Add pstore address from coreboot tables   Stephen Boyd
  • [PATCH 10/12] coreboot: Add /firmware/coreboot node to DT   Stephen Boyd
  • [PATCH 11/12] bootstd: cros: Return negative error code   Stephen Boyd
    • [PATCH 11/12] bootstd: cros: Return negative error code   Simon Glass
  • [PATCH 12/12] mach-snapdragon: Support booting as a coreboot payload   Stephen Boyd
  • [PATCH 00/12] Support to run U-Boot on sc7180 Trogdor Chromebooks   Caleb Connolly
    • [PATCH 00/12] Support to run U-Boot on sc7180 Trogdor Chromebooks   Stephen Boyd
      • [PATCH 00/12] Support to run U-Boot on sc7180 Trogdor Chromebooks   Caleb Connolly
      • [PATCH 00/12] Support to run U-Boot on sc7180 Trogdor Chromebooks   Stephen Boyd
      • [PATCH 00/12] Support to run U-Boot on sc7180 Trogdor Chromebooks   Caleb Connolly
      • [PATCH 00/12] Support to run U-Boot on sc7180 Trogdor Chromebooks   Stephen Boyd
• [PATCH] CI: Update to pylint 3.3.4   Tom Rini
  • [PATCH] CI: Update to pylint 3.3.4   Tom Rini
• [PATCH v2 0/6] rockchip: ROCKCHIP_COMMON_STACK_ADDR improvements   Jonas Karlman
  • [PATCH v2 2/6] rockchip: Make ROCKCHIP_COMMON_STACK_ADDR depend on TPL   Jonas Karlman
  • [PATCH v2 3/6] rockchip: Improve ARMv7 support for ROCKCHIP_COMMON_STACK_ADDR   Jonas Karlman
  • [PATCH v2 4/6] rockchip: Move imply ROCKCHIP_COMMON_STACK_ADDR under SoC Kconfig symbol   Jonas Karlman
  • [PATCH v2 5/6] rockchip: Move imply ROCKCHIP_EXTERNAL_TPL under SoC Kconfig symbol   Jonas Karlman
  • [PATCH v2 6/6] rockchip: Add RK3576 support for ROCKCHIP_COMMON_STACK_ADDR   Jonas Karlman
• [PATCH v2 1/6] rockchip: Move imply TPL_ROCKCHIP_COMMON_BOARD under SoC Kconfig symbol   Jonas Karlman
• [PATCH 0/3] Add support for RAM boot from maskrom mode   Jonas Karlman
  • [PATCH 1/3] rockchip: Move TEXT_BASE to 8 MiB offset from start of DRAM   Jonas Karlman
  • [PATCH 2/3] rockchip: Add support for RAM boot from maskrom mode   Jonas Karlman
  • [PATCH 3/3] rockchip: Enable RAM boot using ROCKCHIP_MASKROM_IMAGE   Jonas Karlman
• [PATCH] crypto: fsl_hash: fix flush dcache alignment in caam_hash()   blemouzy.ml at gmail.com
  • [PATCH] crypto: fsl_hash: fix flush dcache alignment in caam_hash()   Peng Fan
    • [PATCH] crypto: fsl_hash: fix flush dcache alignment in caam_hash()   Benjamin Lemouzy
• [PATCH v1] arm: socfpga: soc64: boot_scratch_cold 8 and 9 usage documentation   alif.zakuan.yuslaimi at intel.com
  • [PATCH v1] arm: socfpga: soc64: boot_scratch_cold 8 and 9 usage documentation   Chee, Tien Fong
• [PATCH v6 0/8] Add Starfive JH7110 Cadence USB driver   E Shattow
  • [PATCH v6 0/8] Add Starfive JH7110 Cadence USB driver   Marek Vasut
• [UBOOT PATCH] xilinx: versal: Add firmware access to CRP Boot mode register   Venkatesh Yadav Abbarapu
  • [UBOOT PATCH] xilinx: versal: Add firmware access to CRP Boot mode register   Michal Simek
• 回复: [EXT] Re: [PATCH v4 05/20] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Alice Guo (OSS)
  • Re: 回复: [EXT] Re: [PATCH v4 05/20] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Marek Vasut
• [UBOOT PATCH] spi: spi-uclass: Fix reduced read speed when parallel config is enabled   Venkatesh Yadav Abbarapu
  • [UBOOT PATCH] spi: spi-uclass: Fix reduced read speed when parallel config is enabled   Marek Vasut
    • [UBOOT PATCH] spi: spi-uclass: Fix reduced read speed when parallel config is enabled   Kummari, Prasad
  • [UBOOT PATCH] spi: spi-uclass: Fix reduced read speed when parallel config is enabled   Kumar, Udit
• [PATCH v3 0/4] riscv: dts: starfive: simplify binman config   Heinrich Schuchardt
  • [PATCH v3 2/4] riscv: dts: no default configuration for MULTI_DTB_FIT   Heinrich Schuchardt
    • [PATCH v3 2/4] riscv: dts: no default configuration for MULTI_DTB_FIT   E Shattow
  • [PATCH v3 3/4] board: starfive: spl: strip off 'starfive/' prefix   Heinrich Schuchardt
    • [PATCH v3 3/4] board: starfive: spl: strip off 'starfive/' prefix   E Shattow
      • [PATCH v3 3/4] board: starfive: spl: strip off 'starfive/' prefix   Heinrich Schuchardt
      • [PATCH v3 3/4] board: starfive: spl: strip off 'starfive/' prefix   E Shattow
      • [PATCH v3 3/4] board: starfive: spl: strip off 'starfive/' prefix   Heinrich Schuchardt
      • [PATCH v3 3/4] board: starfive: spl: strip off 'starfive/' prefix   E Shattow
      • [PATCH v3 3/4] board: starfive: spl: strip off 'starfive/' prefix   Heinrich Schuchardt
      • [PATCH v3 3/4] board: starfive: spl: strip off 'starfive/' prefix   E Shattow
  • [PATCH v3 4/4] riscv: dts: starfive: remove duplicate itb entries   Heinrich Schuchardt
    • [PATCH v3 4/4] riscv: dts: starfive: remove duplicate itb entries   E Shattow
• [PATCH v3 1/4] riscv: dts: add OF_LIST handling to binman.dtsi   Heinrich Schuchardt
  • [PATCH v3 1/4] riscv: dts: add OF_LIST handling to binman.dtsi   E Shattow
• [PATCH 0/8] Add support for sam9x7 SoC and SAM9X75 Curiosity board   Manikandan Muralidharan
  • [PATCH 1/8] clk: at91: sam9x60-pll: add support for core clock frequency inputs   Manikandan Muralidharan
  • [PATCH 2/8] clk: at91: sam9x60-pll: add support for HW PLL freq dividers   Manikandan Muralidharan
  • [PATCH 3/8] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family   Manikandan Muralidharan
  • [PATCH 4/8] ARM: at91: Add sam9x7 soc   Manikandan Muralidharan
  • [PATCH 5/8] ARM: dts: at91: sam9x7: Add initial DT for sam9x7 SoC   Manikandan Muralidharan
    • [PATCH 5/8] ARM: dts: at91: sam9x7: Add initial DT for sam9x7 SoC   Sumit Garg
      • [PATCH 5/8] ARM: dts: at91: sam9x7: Add initial DT for sam9x7 SoC   Manikandan.M at microchip.com
      • [PATCH 5/8] ARM: dts: at91: sam9x7: Add initial DT for sam9x7 SoC   Eugen Hristev
  • [PATCH 6/8] ARM: dts: at91: sam9x75_curiosity: add sam9x75 curiosity board   Manikandan Muralidharan
    • [PATCH 6/8] ARM: dts: at91: sam9x75_curiosity: add sam9x75 curiosity board   Sumit Garg
  • [PATCH 7/8] board: sam9x75_curiosity: Add support for sam9x75 curiosity   Manikandan Muralidharan
  • [PATCH 8/8] configs: sam9x75_curiosity: Add initial mmc default config   Manikandan Muralidharan
• [U-Boot][PATCH v1] cmd/fpga: use config node for loadmk   Ibai Erkiaga
• [RFC PATCH] power: regulator: Avoid probing of regulators at pre-ram stage   Udit Kumar
  • [RFC PATCH] power: regulator: Avoid probing of regulators at pre-ram stage   Quentin Schulz
    • [RFC PATCH] power: regulator: Avoid probing of regulators at pre-ram stage   Jonas Karlman
      • [RFC PATCH] power: regulator: Avoid probing of regulators at pre-ram stage   Kumar, Udit
• [RFC PATCH 0/3] Risc-V 32 bit/64 bit images   Mayuresh Chitale
  • [RFC PATCH 1/3] riscv: image: Add new image type for RV64   Mayuresh Chitale
  • [RFC PATCH 2/3] riscv: Select appropriate image type   Mayuresh Chitale
  • [RFC PATCH 3/3] riscv: booti/bootm: Verify image arch type   Mayuresh Chitale
    • [RFC PATCH 3/3] riscv: booti/bootm: Verify image arch type   Heinrich Schuchardt
      • [RFC PATCH 3/3] riscv: booti/bootm: Verify image arch type   Mayuresh Chitale
• [PATCH] spl: return kernel image header size in os boot   Anshul Dalal
  • [PATCH] spl: return kernel image header size in os boot   Tom Rini
    • [EXTERNAL] Re: [PATCH] spl: return kernel image header size in os boot   Anshul Dalal
      • [EXTERNAL] Re: [PATCH] spl: return kernel image header size in os boot   Tom Rini
  • [PATCH] spl: return kernel image header size in os boot   Sean Anderson
• [PATCH 1/2] ARM: imx: Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on Data Modul i.MX8M Mini eDM SBC   Marek Vasut
  • [PATCH 2/2] ARM: imx: Fix CONFIG_BOOTCOUNT_ALTBOOTCMD duplication on Data Modul i.MX8M eDM SBC   Marek Vasut
    • [PATCH 2/2] ARM: imx: Fix CONFIG_BOOTCOUNT_ALTBOOTCMD duplication on Data Modul i.MX8M eDM SBC   Fabio Estevam
  • [PATCH 1/2] ARM: imx: Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on Data Modul i.MX8M Mini eDM SBC   Tom Rini
• [PATCH] ARM: imx: Fix CONFIG_BOOTCOUNT_ALTBOOTCMD duplication on DH i.MX8MP DHCOM   Marek Vasut
  • [PATCH] ARM: imx: Fix CONFIG_BOOTCOUNT_ALTBOOTCMD duplication on DH i.MX8MP DHCOM   Fabio Estevam
• [PATCH] ARM: stm32: Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM   Marek Vasut
  • [PATCH] ARM: stm32: Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM   Tom Rini
• [PATCH v3 1/2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Marek Vasut
  • [PATCH v3 2/2] env: mmc: Clean up env_mmc_load() ifdeffery   Marek Vasut
    • [PATCH v3 2/2] env: mmc: Clean up env_mmc_load() ifdeffery   Quentin Schulz
      • [PATCH v3 2/2] env: mmc: Clean up env_mmc_load() ifdeffery   Marek Vasut
    • [PATCH v3 2/2] env: mmc: Clean up env_mmc_load() ifdeffery   Mattijs Korpershoek
  • [PATCH v3 1/2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Quentin Schulz
    • [PATCH v3 1/2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Marek Vasut
      • [PATCH v3 1/2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Quentin Schulz
  • [PATCH v3 1/2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Mattijs Korpershoek
  • [PATCH v3 1/2] env: mmc: Make redundant env in both eMMC boot partitions consider DT properties   Tom Rini
• [u-boot-test-hooks PATCH 1/3] labgrid: Deal with strange Python error   Simon Glass
  • [u-boot-test-hooks PATCH 2/3] ellesmere: Add QEMU config for riscv, arm, x86   Simon Glass
  • [u-boot-test-hooks PATCH 3/3] RFC: Add some network info for ellesmere lab   Simon Glass
    • [u-boot-test-hooks PATCH 3/3] RFC: Add some network info for ellesmere lab   Tom Rini
• [u-boot-test-hooks PATCH 1/2] labgrid-sjg: Add kea lab   Simon Glass
  • [u-boot-test-hooks PATCH 2/2] labgrid-sjg: Add systemd scripts   Simon Glass
    • [u-boot-test-hooks PATCH 2/2] labgrid-sjg: Add systemd scripts   Tom Rini
• [PATCH] configs: enable CONFIG_PCI_REGION_MULTI_ENTRY=y in sifive_unmatched_defconfig   Yuri Zaporozhets
• Orange Pi 5b defconfig   Cenk Uluisik
  • Orange Pi 5b defconfig   Quentin Schulz
• [PATCH] net: dwc: xgmac: Allow DMA buffers above 4GB   Nikunj Kela
• Please pull u-boot-tegra picasso   Svyatoslav Ryhel
  • Please pull u-boot-tegra picasso   Tom Rini
• [PATCH 1/2] imx8mq: imx8mq_evk: fix DEFAULT_FDT_FILE   Peng Fan (OSS)
  • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Peng Fan (OSS)
    • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Fabio Estevam
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Fabio Estevam
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Peng Fan
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Tom Rini
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Fabio Estevam
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Fabio Estevam
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Tom Rini
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Fabio Estevam
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Peng Fan
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Tom Rini
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Fabio Estevam
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Peng Fan
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Fabio Estevam
      • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Peng Fan
    • [PATCH 2/2] imx8mm: imx8mm_evk: fix BOOTSTD boot   Fabio Estevam
• Incorrect include path in cmd/setexpr.c   Ahmed Kilany
• [PATCH] ARM: imx: Introduce DH i.MX6 DHSOM board specific defconfigs   Marek Vasut
  • [PATCH] ARM: imx: Introduce DH i.MX6 DHSOM board specific defconfigs   Fabio Estevam
• [PATCH] ARM: stm32: Introduce DH STM32MP15xx DHSOM board specific defconfigs   Marek Vasut
• [PATCH v3 00/23] net: miiphybb: Get rid of global bb_miiphy_buses[]   Marek Vasut
  • [PATCH v3 01/23] net: ravb: Drop empty init callback   Marek Vasut
  • [PATCH v3 02/23] net: sh_eth: Drop empty init callback   Marek Vasut
  • [PATCH v3 03/23] net: designware: Drop NULL priv assignment   Marek Vasut
  • [PATCH v3 04/23] net: ravb: Reorder bb_miiphy functions   Marek Vasut
  • [PATCH v3 05/23] net: sh_eth: Reorder bb_miiphy functions   Marek Vasut
    • [PATCH v3 05/23] net: sh_eth: Reorder bb_miiphy functions   Paul Barker
  • [PATCH v3 06/23] arm: mvebu: a38x: Reorder bb_miiphy functions   Marek Vasut
    • [PATCH v3 06/23] arm: mvebu: a38x: Reorder bb_miiphy functions   Paul Barker
  • [PATCH v3 07/23] net: designware: Reorder bb_miiphy functions   Marek Vasut
    • [PATCH v3 07/23] net: designware: Reorder bb_miiphy functions   Paul Barker
  • [PATCH v3 08/23] arm: mvebu: a38x: Call bb_miiphy init directly in driver probe   Marek Vasut
    • [PATCH v3 08/23] arm: mvebu: a38x: Call bb_miiphy init directly in driver probe   Paul Barker
  • [PATCH v3 09/23] net: miiphybb: Drop bb_miiphy_init() and .init callback   Marek Vasut
  • [PATCH v3 10/23] net: designware: Drop bus index   Marek Vasut
    • [PATCH v3 10/23] net: designware: Drop bus index   Paul Barker
  • [PATCH v3 11/23] net: designware: Extract bbmiiphy initialization into dedicated function   Marek Vasut
    • [PATCH v3 11/23] net: designware: Extract bbmiiphy initialization into dedicated function   Paul Barker
  • [PATCH v3 12/23] net: miiphy: Introduce mdio_init()   Marek Vasut
  • [PATCH v3 13/23] net: miiphybb: Introduce bb_miiphy_alloc()/bb_miiphy_free() wrappers   Marek Vasut
  • [PATCH v3 14/23] arm: mvebu: a38x: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
    • [PATCH v3 14/23] arm: mvebu: a38x: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Paul Barker
  • [PATCH v3 15/23] net: ravb: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
    • [PATCH v3 15/23] net: ravb: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Paul Barker
  • [PATCH v3 16/23] net: sh_eth: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
    • [PATCH v3 16/23] net: sh_eth: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Paul Barker
  • [PATCH v3 17/23] net: designware: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
    • [PATCH v3 17/23] net: designware: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Paul Barker
  • [PATCH v3 18/23] net: miiphybb: Use container_of() in bb_miiphy_getbus()   Marek Vasut
  • [PATCH v3 19/23] net: miiphybb: Drop name field from struct bb_miiphy_bus   Marek Vasut
  • [PATCH v3 20/23] arm: mvebu: a38x: Drop use of miiphy_get_dev_by_name()   Marek Vasut
    • [PATCH v3 20/23] arm: mvebu: a38x: Drop use of miiphy_get_dev_by_name()   Paul Barker
  • [PATCH v3 21/23] net: ravb: Drop use of miiphy_get_dev_by_name()   Marek Vasut
  • [PATCH v3 22/23] net: sh_eth: Drop use of miiphy_get_dev_by_name()   Marek Vasut
    • [PATCH v3 22/23] net: sh_eth: Drop use of miiphy_get_dev_by_name()   Paul Barker
  • [PATCH v3 23/23] net: miiphybb: Drop bb_miiphy_buses and bb_miiphy_buses_num   Marek Vasut
  • [PATCH v3 00/23] net: miiphybb: Get rid of global bb_miiphy_buses[]   Paul Barker
    • [PATCH v3 00/23] net: miiphybb: Get rid of global bb_miiphy_buses[]   Marek Vasut
• [PATCH] riscv: dts: spacemit: Update UART compatible for k1   Junhui Liu
  • [PATCH] riscv: dts: spacemit: Update UART compatible for k1   Yixun Lan
• [PATCH v2 00/11] Rockchip VOP2 support   Dang Huynh
  • [PATCH v2 01/11] video: rockchip: dw-mipi-dsi: Depend on CONFIG_VIDEO_BRIDGE   Dang Huynh
    • [PATCH v2 01/11] video: rockchip: dw-mipi-dsi: Depend on CONFIG_VIDEO_BRIDGE   Svyatoslav Ryhel
  • [PATCH v2 02/11] video: rockchip: dw_mipi_dsi: Improve pixel clock calculations   Dang Huynh
  • [PATCH v2 03/11] video: rockchip: dw_mipi_dsi: Proceed when external PHY is not defined   Dang Huynh
    • [PATCH v2 03/11] video: rockchip: dw_mipi_dsi: Proceed when external PHY is not defined   Svyatoslav Ryhel
  • [PATCH v2 04/11] video: rockchip: dw-mipi-dsi: Add get_display_timing support   Dang Huynh
    • [PATCH v2 04/11] video: rockchip: dw-mipi-dsi: Add get_display_timing support   Svyatoslav Ryhel
  • [PATCH v2 05/11] video: Add BOE TH101MB31IG002-28A MIPI-DSI panel   Dang Huynh
    • [PATCH v2 05/11] video: Add BOE TH101MB31IG002-28A MIPI-DSI panel   Svyatoslav Ryhel
  • [PATCH v2 06/11] video: rockchip: Add VOP2 support   Dang Huynh
    • [PATCH v2 06/11] video: rockchip: Add VOP2 support   Chaoyi Chen
  • [PATCH v2 07/11] video: rockchip: vop2: Add video bridge support   Dang Huynh
    • [PATCH v2 07/11] video: rockchip: vop2: Add video bridge support   Svyatoslav Ryhel
  • [PATCH v2 08/11] dts: rockchip: rk356x: Prerelocate VOP in U-Boot proper   Dang Huynh
  • [PATCH v2 09/11] configs: quartz64: Enable vidconsole   Dang Huynh
  • [PATCH v2 10/11] video: rockchip: Add HDMI support for RK3568   Dang Huynh
  • [PATCH v2 11/11] configs: pinetab2-rk3566: Enable video and USB keyboard   Dang Huynh
  • [PATCH v2 00/11] Rockchip VOP2 support   Piotr Zalewski
• [PATCH] amd: versal2: Add the UFS boot mode support   Venkatesh Yadav Abbarapu
  • [PATCH] amd: versal2: Add the UFS boot mode support   neil.armstrong at linaro.org
• [PATCH 00/17] Various toolchain compatibility fixes/improvements   Sam Edwards
  • [PATCH 01/17] arm: Remove stray .mmutable reference in linker script   Sam Edwards
    • [PATCH 01/17] arm: Remove stray .mmutable reference in linker script   Ilias Apalodimas
  • [PATCH 02/17] arm: Exclude eabi_compat from LTO   Sam Edwards
  • [PATCH 03/17] arm: Add __aeabi_memclr in eabi_compat   Sam Edwards
  • [PATCH 04/17] arm: Add aligned-memory aliases to eabi_compat   Sam Edwards
  • [PATCH 05/17] arm: Discard unwanted sections in linker script   Sam Edwards
  • [PATCH 06/17] arm: Use -mstrict-align when the MMU is off   Sam Edwards
    • [PATCH 06/17] arm: Use -mstrict-align when the MMU is off   Heinrich Schuchardt
    • [PATCH 06/17] arm: Use -mstrict-align when the MMU is off   Mark Kettenis
  • [PATCH 07/17] arm: Replace 'adrl' in EFI crt0   Sam Edwards
    • [PATCH 07/17] arm: Replace 'adrl' in EFI crt0   Heinrich Schuchardt
      • [PATCH 07/17] arm: Replace 'adrl' in EFI crt0   Sam Edwards
  • [PATCH 08/17] x86: Fix call64's section flags   Sam Edwards
  • [PATCH 09/17] spl: riscv: opensbi: Error on misaligned FDT   Sam Edwards
    • [PATCH 09/17] spl: riscv: opensbi: Error on misaligned FDT   Heinrich Schuchardt
      • [PATCH 09/17] spl: riscv: opensbi: Error on misaligned FDT   Tom Rini
      • [PATCH 09/17] spl: riscv: opensbi: Error on misaligned FDT   Sam Edwards
  • [PATCH 10/17] spl: Align FDT load address   Sam Edwards
    • [PATCH 10/17] spl: Align FDT load address   Heinrich Schuchardt
      • [PATCH 10/17] spl: Align FDT load address   Tom Rini
      • [PATCH 10/17] spl: Align FDT load address   Heinrich Schuchardt
      • [PATCH 10/17] spl: Align FDT load address   Tom Rini
      • [PATCH 10/17] spl: Align FDT load address   Sam Edwards
  • [PATCH 11/17] makefile: Fix symbol typo in binary_size_check   Sam Edwards
    • [PATCH 11/17] makefile: Fix symbol typo in binary_size_check   Heinrich Schuchardt
      • [PATCH 11/17] makefile: Fix symbol typo in binary_size_check   Simon Glass
  • [PATCH 12/17] makefile: Avoid objcopy --gap-fill for .hex/.srec   Sam Edwards
  • [PATCH 13/17] makefile: Add `norelro` linker option   Sam Edwards
  • [PATCH 14/17] makefile: Add READELF command variable   Sam Edwards
    • [PATCH 14/17] makefile: Add READELF command variable   Heinrich Schuchardt
    • [PATCH 14/17] makefile: Add READELF command variable   Ilias Apalodimas
  • [PATCH 15/17] efi_loader: Remove ENTRY(_start) from linker script   Sam Edwards
    • [PATCH 15/17] efi_loader: Remove ENTRY(_start) from linker script   Heinrich Schuchardt
      • [PATCH 15/17] efi_loader: Remove ENTRY(_start) from linker script   Sam Edwards
  • [PATCH 16/17] efi_loader: Move .dynamic out of .text in EFI   Sam Edwards
    • [PATCH 16/17] efi_loader: Move .dynamic out of .text in EFI   Heinrich Schuchardt
  • [PATCH 17/17] scripts/Makefile.lib: efi: Preserve the .dynstr section as well   Sam Edwards
    • [PATCH 17/17] scripts/Makefile.lib: efi: Preserve the .dynstr section as well   Heinrich Schuchardt
• Need help with booting from SPI Flash   Matwey V. Kornilov
  • Need help with booting from SPI Flash   Quentin Schulz
    • Need help with booting from SPI Flash   Matwey V. Kornilov
      • Need help with booting from SPI Flash   Quentin Schulz
      • Need help with booting from SPI Flash   Matwey V. Kornilov
• [PATCH] spi: Introduce initial eeprom driver mode support   Loureiro, Joao
• [PATCH v3 0/4] core: ofnode: add of_graph parsing helpers   Svyatoslav Ryhel
  • [PATCH v3 1/4] video: bridge-uclass: add get_display_timing ops   Svyatoslav Ryhel
  • [PATCH v3 2/4] video: bridge-uclass: add inline fallbacks of video bridge functions   Svyatoslav Ryhel
  • [PATCH v3 3/4] video: bridge: add transparent LVDS de/encoder bridge   Svyatoslav Ryhel
  • [PATCH v3 4/4] test: dm: add video bridge tests   Svyatoslav Ryhel
• [PATCH v2 1/3] ARM: dts: stm32: drop "st,button1" compatible   Dario Binacchi
  • [PATCH v2 2/3] ARM: dts: stm32: drop "st,led1" compatible   Dario Binacchi
    • [PATCH v2 2/3] ARM: dts: stm32: drop "st,led1" compatible   Patrice CHOTARD
  • [PATCH v2 3/3] board: stm32f746-disco: drop board_late_init()   Dario Binacchi
  • [PATCH v2 1/3] ARM: dts: stm32: drop "st,button1" compatible   Patrice CHOTARD
• [PATCH v2] board: odroid-n2: Update docs for signing   Neil Armstrong
• [PATCH 0/2] tools: mkimage: Add Amlogic Boot Image type   Neil Armstrong
  • [PATCH 0/2] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
• [PATCH] mmc: Fix size calculation for sector addressed MMC version 4   Tom Rini
• [PATCH v2 1/6] rsa: Add rsa_verify_openssl() to use openssl for host builds   Paul HENRYS
  • [PATCH v2 2/6] image: Add an inline declaration of unmap_sysmem()   Paul HENRYS
  • [PATCH v2 3/6] boot: Add support of the pre-load signature for host tools   Paul HENRYS
  • [PATCH v2 4/6] tools: Add preload_check_sign to authenticate images with a pre-load   Paul HENRYS
  • [PATCH v2 5/6] configs: Enable the pre-load signature in tools-only_defconfig   Paul HENRYS
  • [PATCH v2 6/6] binman: Authenticate the image when testing the preload signature   Paul HENRYS
• [PATCH v3 00/44] x86: Improve operation under QEMU   Simon Glass
  • [PATCH v3 01/44] x86: Expand x86_64 early memory   Simon Glass
  • [PATCH v3 02/44] x86: qemu: Switch to bochs display   Simon Glass
  • [PATCH v3 03/44] x86: qemu: Enable dhrystone   Simon Glass
  • [PATCH v3 04/44] x86: qemu: Avoid accessing BSS too early   Simon Glass
  • [PATCH v3 05/44] x86: Drop mpspec from the SPL build   Simon Glass
  • [PATCH v3 06/44] x86: Add some log categories   Simon Glass
  • [PATCH v3 07/44] x86: Drop use of CONFIG_REALMODE_DEBUG   Simon Glass
  • [PATCH v3 08/44] x86: Avoid clearing the VESA display   Simon Glass
  • [PATCH v3 09/44] x86: Add 64-bit entries to the GDT   Simon Glass
  • [PATCH v3 10/44] x86: Use defines for the cache flags   Simon Glass
  • [PATCH v3 11/44] x86: spl: Drop duplicate CPU init   Simon Glass
  • [PATCH v3 12/44] x86: Drop the message about features missing in 64-bit   Simon Glass
  • [PATCH v3 13/44] x86: Include stdbool.h in interrupt header   Simon Glass
  • [PATCH v3 14/44] x86: Tidy up the GDT size in start/16.S   Simon Glass
  • [PATCH v3 15/44] x86: Disable paging before changing to long mode   Simon Glass
  • [PATCH v3 16/44] x86: Use the same GDT when jumping to long mode   Simon Glass
  • [PATCH v3 17/44] x86: Use a simple jump into long mode   Simon Glass
  • [PATCH v3 18/44] x86: Rename the _D dirty flag   Simon Glass
  • [PATCH v3 19/44] x86: Support CPU functions in long mode   Simon Glass
  • [PATCH v3 20/44] x86: Add functions to convert between mtrr size and mask   Simon Glass
  • [PATCH v3 21/44] x86: Update mtrr command to support 64-bit values   Simon Glass
  • [PATCH v3 22/44] x86: Update cpuid_eax et al to work on amd64   Simon Glass
  • [PATCH v3 23/44] x86: Correct msr operation on amd64   Simon Glass
  • [PATCH v3 24/44] x86: Allow adding non-aligned size for MTRR   Simon Glass
  • [PATCH v3 25/44] x86: emulation: Set an MTRR for the RAM   Simon Glass
  • [PATCH v3 26/44] x86: qemu: Support environment and cat command   Simon Glass
  • [PATCH v3 27/44] test/py: Correct sizing of created disks   Simon Glass
  • [PATCH v3 28/44] test/py: Add a helper to send characters   Simon Glass
  • [PATCH v3 29/44] test/py: Allow tests to be filtered by role   Simon Glass
  • [PATCH v3 30/44] x86: e820: Add a function to dump the e820 table   Simon Glass
  • [PATCH v3 31/44] x86: Add a new API for e820   Simon Glass
  • [PATCH v3 32/44] x86: qemu: Use the new e820 API   Simon Glass
  • [PATCH v3 33/44] x86: emulation: Support BLOBLIST_TABLES properly   Simon Glass
  • [PATCH v3 34/44] x86: Support a 64-bit ramdisk address   Simon Glass
  • [PATCH v3 35/44] acpi: Mark struct acpi_rsdp as packed   Simon Glass
  • [PATCH v3 36/44] boot: Consider non-bootable partitions   Simon Glass
    • [PATCH v3 36/44] boot: Consider non-bootable partitions   Heinrich Schuchardt
  • [PATCH v3 37/44] boot: Handle running out of labels   Simon Glass
  • [PATCH v3 38/44] boot: Support IO UARTs for earlycon and console   Simon Glass
  • [PATCH v3 39/44] sandbox: acpi: Correct mapping in FADT   Simon Glass
    • [PATCH v3 39/44] sandbox: acpi: Correct mapping in FADT   Heinrich Schuchardt
  • [PATCH v3 40/44] acpi: Add a checksum to the DMAR table   Simon Glass
  • [PATCH v3 41/44] test: acpi: Correct memory leaks   Simon Glass
  • [PATCH v3 42/44] acpi: Support checking checksums   Simon Glass
  • [PATCH v3 43/44] RFC: test/py: Deal with timeouts   Simon Glass
  • [PATCH v3 44/44] test: Add a test for booting Ubuntu 24.04   Simon Glass
  • [PATCH v3 00/44] x86: Improve operation under QEMU   Tom Rini
• [PATCH v1] arm: dts: npcm7xx: correct the timer node   Jim Liu
• [PATCH v2] amd: versal2: Add the UFS boot mode support   Venkatesh Yadav Abbarapu
• [PATCH v5 0/7] Add initial support for IPQ9574 based boards   Varadarajan Narayanan
  • [PATCH v5 1/7] doc: board/qualcomm: document RDP building/flashing   Varadarajan Narayanan
  • [PATCH v5 2/7] dts: ipq9574-rdp433-u-boot: add override dtsi   Varadarajan Narayanan
  • [PATCH v5 3/7] clk/qcom: add initial clock driver for ipq9574   Varadarajan Narayanan
    • [PATCH v5 3/7] clk/qcom: add initial clock driver for ipq9574   Caleb Connolly
      • [PATCH v5 3/7] clk/qcom: add initial clock driver for ipq9574   Varadarajan Narayanan
  • [PATCH v5 4/7] pinctrl: qcom: Handle get_function_mux failure   Varadarajan Narayanan
  • [PATCH v5 5/7] pinctrl: qcom: Add ipq9574 pinctrl driver   Varadarajan Narayanan
  • [PATCH v5 6/7] mmc: msm_sdhci: Reset clocks before reconfiguration   Varadarajan Narayanan
  • [PATCH v5 7/7] configs: add qcom_ipq9574_mmc_defconfig   Varadarajan Narayanan
• [PATCH v1] led: fix next coverity scan error   Heiko Schocher
  • [PATCH v1] led: fix next coverity scan error   Quentin Schulz
    • [PATCH v1] led: fix next coverity scan error   Heiko Schocher
      • [PATCH v1] led: fix next coverity scan error   Tom Rini
      • [PATCH v1] led: fix next coverity scan error   Quentin Schulz
• [PATCH v3 00/15] Add support for Ethboot for AM68-SK, AM62p-SK   Chintan Vankar
  • [PATCH v3 01/15] net: ti: am65-cpsw-nuss: Define bind method for CPSW driver   Chintan Vankar
    • [PATCH v3 01/15] net: ti: am65-cpsw-nuss: Define bind method for CPSW driver   Roger Quadros
  • [PATCH v3 02/15] arm: mach-k3: am62x: am625_init: Remove explicit probing of CPSW driver   Chintan Vankar
    • [PATCH v3 02/15] arm: mach-k3: am62x: am625_init: Remove explicit probing of CPSW driver   Roger Quadros
  • [PATCH v3 03/15] arm: mach-k3: j721s2: Update SoC auto-gen data to enable Ethernet boot   Chintan Vankar
    • [PATCH v3 03/15] arm: mach-k3: j721s2: Update SoC auto-gen data to enable Ethernet boot   Neha Malcom Francis
  • [PATCH v3 04/15] arm: mach-k3: j721s2_spl: Alias Ethernet boot to CPGMAC   Chintan Vankar
  • [PATCH v3 06/15] configs: am68: Add configs for enabling Ethboot in R5SPL   Chintan Vankar
  • [PATCH v3 07/15] configs: am68: Enable configs required for Ethernet boot   Chintan Vankar
  • [PATCH v3 08/15] arm: mach-k3: am62p: Update SoC auto-gen data to enable CPSW boot   Chintan Vankar
  • [PATCH v3 09/15] board: ti: am62px: evm: Enable cache for AM62p   Chintan Vankar
  • [PATCH v3 10/15] configs: am62p: Add configs for enabling ETHBOOT in R5SPL   Chintan Vankar
  • [PATCH v3 11/15] configs: am62p: Enable configs required for Ethboot   Chintan Vankar
  • [PATCH v3 12/15] arch: arm: mach-k3: r5: j722s: Update SoC autogenerated data to enable Ethernet boot   Chintan Vankar
  • [PATCH v3 13/15] board: ti: j722s: evm: Enable cache for J722s   Chintan Vankar
    • [PATCH v3 13/15] board: ti: j722s: evm: Enable cache for J722s   Sverdlin, Alexander
  • [PATCH v3 14/15] configs: j722s_evm_r5: Add configs to enable Ethboot in R5SPL   Chintan Vankar
  • [PATCH v3 15/15] configs: j722s_evm_a53: Enable configs required for Ethernet boot   Chintan Vankar
• [PATCH v3 05/15] net: ti: Kconfig: Enable SPL_SYSCON config for CPSW   Chintan Vankar
  • [PATCH v3 05/15] net: ti: Kconfig: Enable SPL_SYSCON config for CPSW   Sverdlin, Alexander
• [PATCH 1/3] binman: build_from_git: Add argument specifying branch   Leonard Anderweit
  • [PATCH 2/3] binman: build_from_git: Add optional make path inside git repo   Leonard Anderweit
    • [PATCH 2/3] binman: build_from_git: Add optional make path inside git repo   Simon Glass
  • [PATCH 3/3] binman: cst: Build from source   Leonard Anderweit
    • [PATCH 3/3] binman: cst: Build from source   Simon Glass
  • [PATCH 1/3] binman: build_from_git: Add argument specifying branch   Simon Glass
• [PATCH] lib: rsa: add NULL check for 'algo' in   Anton Moryakov
• [PATCH v2] spl: return header size to spl_load in os boot   Anshul Dalal
• [PATCH v2 00/14] Uthreads   Jerome Forissier
  • [PATCH v2 01/14] arch: introduce symbol HAVE_INITJMP   Jerome Forissier
    • [PATCH v2 01/14] arch: introduce symbol HAVE_INITJMP   Ilias Apalodimas
    • [PATCH v2 01/14] arch: introduce symbol HAVE_INITJMP   Heinrich Schuchardt
      • [PATCH v2 01/14] arch: introduce symbol HAVE_INITJMP   Jerome Forissier
  • [PATCH v2 02/14] arm: add initjmp()   Jerome Forissier
    • [PATCH v2 02/14] arm: add initjmp()   Ilias Apalodimas
    • [PATCH v2 02/14] arm: add initjmp()   Heinrich Schuchardt
      • [PATCH v2 02/14] arm: add initjmp()   Jerome Forissier
      • [PATCH v2 02/14] arm: add initjmp()   Heinrich Schuchardt
      • [PATCH v2 02/14] arm: add initjmp()   Jerome Forissier
      • [PATCH v2 02/14] arm: add initjmp()   Tom Rini
  • [PATCH v2 03/14] riscv: add initjmp()   Jerome Forissier
  • [PATCH v2 04/14] sandbox: add initjmp()   Jerome Forissier
  • [PATCH v2 05/14] test: lib: add initjmp() test   Jerome Forissier
    • [PATCH v2 05/14] test: lib: add initjmp() test   Ilias Apalodimas
    • [PATCH v2 05/14] test: lib: add initjmp() test   Heinrich Schuchardt
      • [PATCH v2 05/14] test: lib: add initjmp() test   Jerome Forissier
  • [PATCH v2 06/14] uthread: add cooperative multi-tasking interface   Jerome Forissier
    • [PATCH v2 06/14] uthread: add cooperative multi-tasking interface   Ilias Apalodimas
      • [PATCH v2 06/14] uthread: add cooperative multi-tasking interface   Jerome Forissier
    • [PATCH v2 06/14] uthread: add cooperative multi-tasking interface   Heinrich Schuchardt
      • [PATCH v2 06/14] uthread: add cooperative multi-tasking interface   Jerome Forissier
  • [PATCH v2 07/14] cyclic: invoke uthread_schedule() from schedule()   Jerome Forissier
    • [PATCH v2 07/14] cyclic: invoke uthread_schedule() from schedule()   Stefan Roese
      • [PATCH v2 07/14] cyclic: invoke uthread_schedule() from schedule()   Jerome Forissier
      • [PATCH v2 07/14] cyclic: invoke uthread_schedule() from schedule()   Stefan Roese
    • [PATCH v2 07/14] cyclic: invoke uthread_schedule() from schedule()   Ilias Apalodimas
  • [PATCH v2 08/14] lib: time: hook uthread_schedule() into udelay()   Jerome Forissier
    • [PATCH v2 08/14] lib: time: hook uthread_schedule() into udelay()   Ilias Apalodimas
      • [PATCH v2 08/14] lib: time: hook uthread_schedule() into udelay()   Yao Zi
      • [PATCH v2 08/14] lib: time: hook uthread_schedule() into udelay()   Jerome Forissier
      • [PATCH v2 08/14] lib: time: hook uthread_schedule() into udelay()   Ilias Apalodimas
  • [PATCH v2 09/14] doc: develop: add documentation for uthreads   Jerome Forissier
  • [PATCH v2 10/14] test: lib: add uthread test   Jerome Forissier
    • [PATCH v2 10/14] test: lib: add uthread test   Ilias Apalodimas
  • [PATCH v2 11/14] dm: usb: move bus initialization into new static function usb_init_bus()   Jerome Forissier
    • [PATCH v2 11/14] dm: usb: move bus initialization into new static function usb_init_bus()   Ilias Apalodimas
  • [PATCH v2 12/14] dm: usb: initialize and scan multiple buses simultaneously with uthread   Jerome Forissier
    • [PATCH v2 12/14] dm: usb: initialize and scan multiple buses simultaneously with uthread   Simon Glass
      • [PATCH v2 12/14] dm: usb: initialize and scan multiple buses simultaneously with uthread   Jerome Forissier
  • [PATCH v2 13/14] cmd: add spawn and wait commands   Jerome Forissier
  • [PATCH v2 14/14] test: dm: add test for spawn and wait commands   Jerome Forissier
    • [PATCH v2 14/14] test: dm: add test for spawn and wait commands   Simon Glass
      • [PATCH v2 14/14] test: dm: add test for spawn and wait commands   Jerome Forissier
• [ANN] U-Boot v2025.04-rc3 released   Tom Rini
  • [ANN] U-Boot v2025.04-rc3 released   Tom Rini
• Pull request: SoCFPGA changes for u-boot-socfpga-next-20250225   Tom Rini
  • Pull request: SoCFPGA changes for u-boot-socfpga-next-20250225   Chee, Tien Fong
• [PATCH 0/7] binman: Check code-coverage requirements   Simon Glass
  • [PATCH 1/7] binman: Exclude dist-packages and site-packages   Simon Glass
  • [PATCH 2/7] binman: Drop GetRootSkipAtStart()   Simon Glass
  • [PATCH 3/7] binman: fit: Drop unused code   Simon Glass
  • [PATCH 4/7] binman: Drop algo check in CheckSetHashValue()   Simon Glass
  • [PATCH 5/7] binman: Workaround lz4 cli padding in test cases   Simon Glass
  • [PATCH 6/7] binman: Workaround missing test coverage   Simon Glass
  • [PATCH 7/7] CI: Run code-coverage test for Binman   Simon Glass
  • [PATCH 0/7] binman: Check code-coverage requirements   Tom Rini
    • [PATCH 0/7] binman: Check code-coverage requirements   Simon Glass
      • [PATCH 0/7] binman: Check code-coverage requirements   Tom Rini
      • [PATCH 0/7] binman: Check code-coverage requirements   Simon Glass
      • [PATCH 0/7] binman: Check code-coverage requirements   Tom Rini
      • [PATCH 0/7] binman: Check code-coverage requirements   Simon Glass
      • [PATCH 0/7] binman: Check code-coverage requirements   Tom Rini
• [PATCH RFC] doc: Include pytests directly in documentation   Tom Rini
• [PATCH 0/5] Update DDR Configurations   Santhosh Kumar K
  • [PATCH 1/5] arm: dts: k3-am64: Update DDR Configurations   Santhosh Kumar K
  • [PATCH 2/5] arm: dts: k3-am62x: Update DDR Configurations   Santhosh Kumar K
  • [PATCH 3/5] arm: dts: k3-am62-lp: Update DDR Configurations   Santhosh Kumar K
  • [PATCH 4/5] arm: dts: k3-am62a: Update DDR Configurations   Santhosh Kumar K
  • [PATCH 5/5] arm: dts: k3-am62p: Update DDR Configurations   Santhosh Kumar K
• [PATCH v6 0/7] Add initial support for IPQ9574 based boards   Varadarajan Narayanan
  • [PATCH v6 1/7] doc: board/qualcomm: document RDP building/flashing   Varadarajan Narayanan
  • [PATCH v6 2/7] dts: ipq9574-rdp433-u-boot: add override dtsi   Varadarajan Narayanan
  • [PATCH v6 3/7] clk/qcom: add initial clock driver for ipq9574   Varadarajan Narayanan
  • [PATCH v6 4/7] pinctrl: qcom: Handle get_function_mux failure   Varadarajan Narayanan
  • [PATCH v6 5/7] pinctrl: qcom: Add ipq9574 pinctrl driver   Varadarajan Narayanan
  • [PATCH v6 6/7] mmc: msm_sdhci: Reset clocks before reconfiguration   Varadarajan Narayanan
  • [PATCH v6 7/7] configs: add qcom_ipq9574_mmc_defconfig   Varadarajan Narayanan
• Halting auto-boot process in the U-Boot shell https://lore.kernel.org/u-boot/20220614060203.33600-1-heinrich.schuchardt at canonical.com/   Kummari, Prasad
  • Halting auto-boot process in the U-Boot shell https://lore.kernel.org/u-boot/20220614060203.33600-1-heinrich.schuchardt at canonical.com/   Heinrich Schuchardt
    • Halting auto-boot process in the U-Boot shell https://lore.kernel.org/u-boot/20220614060203.33600-1-heinrich.schuchardt at canonical.com/   Michal Simek
      • Halting auto-boot process in the U-Boot shell https://lore.kernel.org/u-boot/20220614060203.33600-1-heinrich.schuchardt at canonical.com/   Heinrich Schuchardt
      • Halting auto-boot process in the U-Boot shell https://lore.kernel.org/u-boot/20220614060203.33600-1-heinrich.schuchardt at canonical.com/   Michal Simek
      • Halting auto-boot process in the U-Boot shell https://lore.kernel.org/u-boot/20220614060203.33600-1-heinrich.schuchardt at canonical.com/   Simon Glass
      • Halting auto-boot process in the U-Boot shell https://lore.kernel.org/u-boot/20220614060203.33600-1-heinrich.schuchardt at canonical.com/   Michal Simek
• [PATCH 1/1] cmd: simplify eficonfig_init()   Heinrich Schuchardt
  • [PATCH 1/1] cmd: simplify eficonfig_init()   Ilias Apalodimas
• [PATCH v2] led: fix next coverity scan error   Heiko Schocher
  • [PATCH v2] led: fix next coverity scan error   Quentin Schulz
• [PATCH 0/2] Enable USB MSC Boot for AM62, AM62A and AM62P   Siddharth Vadapalli
  • [PATCH 1/2] configs: am62x_r5: introduce fragment for USB MSC boot   Siddharth Vadapalli
  • [PATCH 2/2] configs: am62x_a53: introduce fragment for USB MSC boot   Siddharth Vadapalli
  • [PATCH 0/2] Enable USB MSC Boot for AM62, AM62A and AM62P   Javier Tia
• [PATCH 0/2] sunxi: clk/mmc: Fix T113-s3 MMC performance   Andre Przywara
  • [PATCH 1/2] sunxi: mmc: Fix T113-s3 MMC clock divider   Andre Przywara
    • [PATCH 1/2] sunxi: mmc: Fix T113-s3 MMC clock divider   Jernej Škrabec
    • [PATCH 1/2] sunxi: mmc: Fix T113-s3 MMC clock divider   Peng Fan
      • [PATCH 1/2] sunxi: mmc: Fix T113-s3 MMC clock divider   Tom Rini
      • [PATCH 1/2] sunxi: mmc: Fix T113-s3 MMC clock divider   Peng Fan
  • [PATCH 2/2] sunxi: sun50i_h6: clock: fix PLL_PERIPH0 rate calculation   Andre Przywara
    • [PATCH 2/2] sunxi: sun50i_h6: clock: fix PLL_PERIPH0 rate calculation   Jernej Škrabec
    • [PATCH 2/2] sunxi: sun50i_h6: clock: fix PLL_PERIPH0 rate calculation   Peng Fan
• [PATCH v2 0/7] Bring support for Xiaomi Mi Pad 1 (Tegra K1)   Svyatoslav Ryhel
  • [PATCH v2 1/7] pinctrl: tegra: add Tegra K1 support   Svyatoslav Ryhel
  • [PATCH v2 2/7] video: tegra20: dc: dsi: add Tegra K1 compatible   Svyatoslav Ryhel
  • [PATCH v2 3/7] video: tegra20: mipi: add Tegra K1 support   Svyatoslav Ryhel
  • [PATCH v2 4/7] video: add TI LP855x backlight driver   Svyatoslav Ryhel
  • [PATCH v2 5/7] video: panel: add Sharp LQ079L1SX01 MIPI DSI panel driver   Svyatoslav Ryhel
  • [PATCH v2 6/7] ARM: tegra124: implement BCT patching   Svyatoslav Ryhel
  • [PATCH v2 7/7] board: xiaomi: mocha: add Xiaomi Mi Pad A0101 support   Svyatoslav Ryhel
• [PATCH v2 00/12] Tegra DSI/DC code refinement   Svyatoslav Ryhel
  • [PATCH v2 01/12] video: tegra20: dc: switch to newer clk API   Svyatoslav Ryhel
  • [PATCH v2 02/12] video: tegra20: dc: remove hardcoded Tegra 2 specific parts   Svyatoslav Ryhel
  • [PATCH v2 03/12] video: tegra20: dc: remove excessive headers   Svyatoslav Ryhel
  • [PATCH v2 04/12] video: tegra20: dc: improve code quality   Svyatoslav Ryhel
  • [PATCH v2 05/12] video: tegra20: dsi: check for panels among child nodes   Svyatoslav Ryhel
  • [PATCH v2 06/12] video: tegra20: dsi: switch to newer clk API   Svyatoslav Ryhel
  • [PATCH v2 07/12] video: tegra20: dsi: align ganged mode implementation   Svyatoslav Ryhel
  • [PATCH v2 08/12] video: tegra20: dsi: make SOL delay calculation mode independent   Svyatoslav Ryhel
  • [PATCH v2 09/12] video: tegra20: dsi: calculate packet parameters for video mode   Svyatoslav Ryhel
  • [PATCH v2 10/12] video: tegra20: dsi: calculate lanes for ganged mode   Svyatoslav Ryhel
  • [PATCH v2 11/12] video: tegra20: dsi: pass source on DSI configuration   Svyatoslav Ryhel
  • [PATCH v2 12/12] ARM: tegra: endeavoru: adjust panel node   Svyatoslav Ryhel
• [PATCH] miiphy: define mii_devs with LIST_HEAD()   Weijie Gao
• [PATCH 0/2] rng: msm: support newer SoCs   Neil Armstrong
  • [PATCH 0/2] rng: msm: support newer SoCs   Tom Rini
    • [PATCH 0/2] rng: msm: support newer SoCs   Tom Rini
      • [PATCH 0/2] rng: msm: support newer SoCs   Caleb Connolly
      • [PATCH 0/2] rng: msm: support newer SoCs   Neil Armstrong
• [PATCH 1/3] pci_auto: Downgrade prefetch if necessary   Patrick Rudolph
  • [PATCH 2/3] emulation: qemu-sbsa: Select SYS_PCI_64BIT   Patrick Rudolph
  • [PATCH 3/3] emulation: qemu-sbsa: Enable PCI enumeration   Patrick Rudolph
• [PATCH] tools: add HOSTCFLAGS from openssl pkg-config   Raymond Mao
• [PULL] Please pull qcom-fixes-2025.04-rc4   Caleb Connolly
  • [PULL] Please pull qcom-fixes-2025.04-rc4   Caleb Connolly
    • [PULL] Please pull qcom-fixes-2025.04-rc4   Tom Rini
• [PATCH] usb: dwc3: am62: Use UCLASS_NOP for glue driver   Mattijs Korpershoek
  • [PATCH] usb: dwc3: am62: Use UCLASS_NOP for glue driver   Siddharth Vadapalli
    • [PATCH] usb: dwc3: am62: Use UCLASS_NOP for glue driver   Mattijs Korpershoek
      • [PATCH] usb: dwc3: am62: Use UCLASS_NOP for glue driver   Siddharth Vadapalli
      • [PATCH] usb: dwc3: am62: Use UCLASS_NOP for glue driver   Mattijs Korpershoek
• [PATCH 1/3] mbedtls: fix incorrect kconfig dependencies on mbedtls   Raymond Mao
  • [PATCH 1/3] mbedtls: fix incorrect kconfig dependencies on mbedtls   Raymond Mao
• [PATCH] scripts/checkpatch.pl: Upgrade IS_ENABLED_CONFIG to error for U-Boot   Tom Rini
• Watchdog behavior   Matwey V. Kornilov
• [resend v3 00/19] Add Cadence NAND Driver support   dinesh.maniyam at intel.com
  • [resend v3 01/19] dt: nand: add cadence nand dt-bindings   dinesh.maniyam at intel.com
  • [resend v3 02/19] arm: dts: agilex5: Enabled cdns-nand dts setting   dinesh.maniyam at intel.com
  • [resend v3 03/19] drivers: mtd: nand: Add driver for Cadence Nand   dinesh.maniyam at intel.com
  • [resend v3 04/19] drivers: mtd: nand: cadence: Add support for read status command   dinesh.maniyam at intel.com
  • [resend v3 05/19] drivers: mtd: nand: cadence: Add support for readid command   dinesh.maniyam at intel.com
  • [resend v3 06/19] drivers: mtd: nand: cadence: Add support for NAND_CMD_PARAM   dinesh.maniyam at intel.com
  • [resend v3 07/19] drivers: mtd: nand: cadence: Add support for NAND_CMD_RESET   dinesh.maniyam at intel.com
  • [resend v3 08/19] drivers: mtd: nand: cadence: Support cmd SET_FEATURES & GET_FEATURES   dinesh.maniyam at intel.com
  • [resend v3 09/19] drivers: mtd: nand: cadence: Flush & invalidate dma descriptor   dinesh.maniyam at intel.com
  • [resend v3 10/19] drivers: mtd: nand: cadence: Poll for desc complete status   dinesh.maniyam at intel.com
  • [resend v3 11/19] drivers: mtd: nand: cadence: Use bounce buffer   dinesh.maniyam at intel.com
  • [resend v3 12/19] drivers: nand: Enabled Kconfig and Makefile for cdns-nand   dinesh.maniyam at intel.com
  • [resend v3 13/19] configs: nand2_defconfig: Enable configs for nand boot   dinesh.maniyam at intel.com
  • [resend v3 14/19] drivers: mtd: nand: base: Add support for Hardware ECC for check bad block   dinesh.maniyam at intel.com
  • [resend v3 15/19] drivers: mtd: nand: spl: Add support for nand SPL load image   dinesh.maniyam at intel.com
  • [resend v3 16/19] drivers: mtd: nand: Enabled Kconfig and Makefile for Cadence-SPL   dinesh.maniyam at intel.com
  • [resend v3 17/19] drivers: mtd: nand: Enabled Kconfig and Makefile for SPL_NAND_FRAMEWORK   dinesh.maniyam at intel.com
    • [resend v3 17/19] drivers: mtd: nand: Enabled Kconfig and Makefile for SPL_NAND_FRAMEWORK   Michael Nazzareno Trimarchi
      • [resend v3 17/19] drivers: mtd: nand: Enabled Kconfig and Makefile for SPL_NAND_FRAMEWORK   Maniyam, Dinesh
      • [resend v3 17/19] drivers: mtd: nand: Enabled Kconfig and Makefile for SPL_NAND_FRAMEWORK   Michael Nazzareno Trimarchi
      • [resend v3 17/19] drivers: mtd: nand: Enabled Kconfig and Makefile for SPL_NAND_FRAMEWORK   Maniyam, Dinesh
  • [resend v3 18/19] drivers: mtd: nand: Kconfig: Add SYS_NAND_PAGE_SIZE dependency   dinesh.maniyam at intel.com
  • [resend v3 19/19] drivers: mtd: nand: Kconfig: Enabled self-init for cdns-nand SPL   dinesh.maniyam at intel.com
  • [resend v3 00/19] Add Cadence NAND Driver support   Michael Nazzareno Trimarchi
    • [resend v3 00/19] Add Cadence NAND Driver support   Maniyam, Dinesh
• [PATCH v2 0/5] Syncing up on skip-at-start   Simon Glass
  • [PATCH v2 1/5] Revert "dm: core: Simplify dm_probe_devices()"   Simon Glass
  • [PATCH v2 2/5] samsung: snow: Use BLOBLIST_FIXED   Simon Glass
    • [PATCH v2 2/5] samsung: snow: Use BLOBLIST_FIXED   Tom Rini
      • [PATCH v2 2/5] samsung: snow: Use BLOBLIST_FIXED   Simon Glass
      • [PATCH v2 2/5] samsung: snow: Use BLOBLIST_FIXED   Tom Rini
      • [PATCH v2 2/5] samsung: snow: Use BLOBLIST_FIXED   Simon Glass
      • [PATCH v2 2/5] samsung: snow: Use BLOBLIST_FIXED   Tom Rini
  • [PATCH v2 3/5] binman: Rename Entry.end_4gb   Simon Glass
  • [PATCH v2 4/5] binman: Honour the skip-at-start property more faithfully   Simon Glass
  • [PATCH v2 5/5] x86: Stop working around skip-at-start   Simon Glass
  • [PATCH v2 0/5] Syncing up on skip-at-start   Tom Rini
• [PATCH v3 00/12] drivers: Driver support for ADI SC5xx SoCs   Greg Malysa
  • [PATCH v3 01/12] pinctrl: Add support for ADI SC5XX-family pinctrl   Greg Malysa
  • [PATCH v3 02/12] doc: Add dt-bindings and descriptions for ADI SC5xx-family pinctrl   Greg Malysa
  • [PATCH v3 03/12] gpio: Add support for SC5XX-family processor GPIO driver   Greg Malysa
  • [PATCH v3 04/12] gpio: Add support for ADI ADP5588 GPIO expander chips   Greg Malysa
  • [PATCH v3 05/12] usb: musb-new: Add support for Analog Devices SC5xx SoCs   Greg Malysa
  • [PATCH v3 06/12] i2c: Add support for ADI SC5XX-family I2C peripheral   Greg Malysa
  • [PATCH v3 07/12] net: Add support for ADI SC5xx SoCs with DWC QoS ethernet   Greg Malysa
  • [PATCH v3 08/12] watchdog: Add support for ADI SC5XX-family watchdog peripheral   Greg Malysa
    • [PATCH v3 08/12] watchdog: Add support for ADI SC5XX-family watchdog peripheral   Stefan Roese
  • [PATCH v3 09/12] dma: Add driver for ADI SC5xx-family SoC MDMA functionality   Greg Malysa
  • [PATCH v3 10/12] remoteproc: Add in SHARC loading for ADI SC5XX-family processors   Greg Malysa
  • [PATCH v3 11/12] spi: Add support for ADI SC5XX-family processor SPI peripherals   Greg Malysa
  • [PATCH v3 12/12] mmc: Add support for ADI SC5XX-family processor SDHCI peripherals   Greg Malysa
• [PATCH v2 0/4] USB-PD TCPM improvements   Sebastian Reichel
  • [PATCH v2 1/4] usb: tcpm: improve handling of some power-supplies   Sebastian Reichel
  • [PATCH v2 2/4] usb: tcpm: avoid resets for missing source capability messages   Sebastian Reichel
  • [PATCH v2 3/4] usb: tcpm: print error on hard reset   Sebastian Reichel
  • [PATCH v2 0/4] USB-PD TCPM improvements   Anand Moon
• [PATCH v2 4/4] usb: tcpm: improve data role mismatch error recovery   Sebastian Reichel
• [PULL] u-boot-sh/next   Marek Vasut
  • [PULL] u-boot-sh/next   Tom Rini
• [PATCH] test: event: Correct usage of IS_ENABLED() macro in test/common/event.c   Tom Rini
• [PATCH] x86: apl: Correct usage of IS_ENABLED() macro in acpi-pmc-uclass.c   Tom Rini
• [PATCH] cmd: mvebu/bubt: Correct usage of IS_ENABLED() macro   Tom Rini
  • [PATCH] cmd: mvebu/bubt: Correct usage of IS_ENABLED() macro   Stefan Roese
• [PATCH] clk: rockchip: Correct usage of IS_ENABLED() macro   Tom Rini
  • [PATCH] clk: rockchip: Correct usage of IS_ENABLED() macro   Kever Yang
• [PATCH] x86: Correct usage of IS_ENABLED() macro in arch/x86/lib/spl.c   Tom Rini
• [PATCH] gpio: x86: Correct usage of IS_ENABLED() macro in intel_pinctrl_defs.h   Tom Rini
• [PATCH v2 1/3] binman: build_from_git: Add argument specifying branch   Leonard Anderweit
  • [PATCH v2 2/3] binman: build_from_git: Add optional make path inside git repo   Leonard Anderweit
  • [PATCH v2 3/3] binman: cst: Build from source   Leonard Anderweit
• [PATCH v2 00/15] Support to run U-Boot on sc7180 Trogdor Chromebooks   Stephen Boyd
  • [PATCH v2 01/15] bootstd: cros: Return negative error code   Stephen Boyd
  • [PATCH v2 02/15] clk: qcom: Add driver for sc7180   Stephen Boyd
    • [PATCH v2 02/15] clk: qcom: Add driver for sc7180   Neil Armstrong
  • [PATCH v2 03/15] pinctrl: qcom: Add driver for sc7180   Stephen Boyd
    • [PATCH v2 03/15] pinctrl: qcom: Add driver for sc7180   Neil Armstrong
  • [PATCH v2 04/15] spi: Add Qualcomm GENI SPI driver   Stephen Boyd
    • [PATCH v2 04/15] spi: Add Qualcomm GENI SPI driver   Neil Armstrong
  • [PATCH v2 05/15] coreboot: Move coreboot logic out of x86 to a generic place   Stephen Boyd
  • [PATCH v2 06/15] arm: Support running U-Boot as a coreboot payload on ARM64   Stephen Boyd
    • [PATCH v2 06/15] arm: Support running U-Boot as a coreboot payload on ARM64   Tom Rini
  • [PATCH v2 07/15] cmd/cbsysinfo: Skip the CMOS 'option_table' when not present   Stephen Boyd
  • [PATCH v2 08/15] cmd/cbsysinfo: Allow on ARM as well   Stephen Boyd
    • [PATCH v2 08/15] cmd/cbsysinfo: Allow on ARM as well   Tom Rini
  • [PATCH v2 09/15] coreboot: Parse sku_id/fw_config from coreboot tables   Stephen Boyd
  • [PATCH v2 10/15] pstore: Add pstore address from coreboot tables   Stephen Boyd
  • [PATCH v2 11/15] coreboot: Add /firmware/coreboot node to DT   Stephen Boyd
  • [PATCH v2 12/15] coreboot: Move timestamp parsing to generic place   Stephen Boyd
  • [PATCH v2 13/15] mach-snapdragon: Support booting as a coreboot payload   Stephen Boyd
  • [PATCH v2 14/15] cmd: ximg: Support LZO compressed images   Stephen Boyd
    • [PATCH v2 14/15] cmd: ximg: Support LZO compressed images   Tom Rini
  • [PATCH v2 15/15] cmd: ximg: Support LZ4 compressed images   Stephen Boyd
    • [PATCH v2 15/15] cmd: ximg: Support LZ4 compressed images   Tom Rini
• [PATCH v4 0/3] EFI Capsule update explicitly sets dfu_alt_info   Jonathan Humphreys
• [PATCH v4 1/3] xilinx: dfu: Fill directly update_info.dfu_string   Jonathan Humphreys
  • [PATCH v4 1/3] xilinx: dfu: Fill directly update_info.dfu_string   Heinrich Schuchardt
    • [PATCH v4 1/3] xilinx: dfu: Fill directly update_info.dfu_string   Michal Simek
      • [PATCH v4 1/3] xilinx: dfu: Fill directly update_info.dfu_string   Heinrich Schuchardt
      • [PATCH v4 1/3] xilinx: dfu: Fill directly update_info.dfu_string   Jon Humphreys
• [PATCH v4 2/3] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Jonathan Humphreys
• [PATCH v4 3/3] board: remove capsule update support in set_dfu_alt_info()   Jonathan Humphreys
  • [PATCH v4 3/3] board: remove capsule update support in set_dfu_alt_info()   Wadim Egorov
• [PATCH] arm: mvebu: Fix typos in Kconfig help text   Chris Packham
  • [PATCH] arm: mvebu: Fix typos in Kconfig help text   Stefan Roese
• [PATCH] MAINTAINERS, git-mailrc: socfpga: Update email to Altera   tien.fong.chee at intel.com
  • [PATCH] MAINTAINERS, git-mailrc: socfpga: Update email to Altera   Tom Rini
    • [PATCH] MAINTAINERS, git-mailrc: socfpga: Update email to Altera   Chee, Tien Fong
      • [PATCH] MAINTAINERS, git-mailrc: socfpga: Update email to Altera   Tom Rini
• [RFC PATCH] UFS: Remove the timeout while send command   Venkatesh Yadav Abbarapu
  • [RFC PATCH] UFS: Remove the timeout while send command   neil.armstrong at linaro.org
• [PATCH] board: ti: j784s4: Update Resource Management configs   Neha Malcom Francis
  • [PATCH] board: ti: j784s4: Update Resource Management configs   Kumar, Udit
• [PATCH v2 0/8] Add support for sam9x7 SoC and SAM9X75 Curiosity board   Manikandan Muralidharan
  • [PATCH v2 2/8] clk: at91: sam9x60-pll: add support for core clock frequency inputs   Manikandan Muralidharan
  • [PATCH v2 3/8] clk: at91: sam9x60-pll: add support for HW PLL freq dividers   Manikandan Muralidharan
  • [PATCH v2 4/8] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family   Manikandan Muralidharan
  • [PATCH v2 5/8] ARM: at91: Add sam9x7 soc   Manikandan Muralidharan
  • [PATCH v2 6/8] ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board   Manikandan Muralidharan
  • [PATCH v2 7/8] board: sam9x75_curiosity: Add support for sam9x75 curiosity   Manikandan Muralidharan
  • [PATCH v2 8/8] configs: sam9x75_curiosity: Add initial mmc default config   Manikandan Muralidharan
• [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Manikandan Muralidharan
  • [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Sumit Garg
    • [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Manikandan.M at microchip.com
      • [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Eugen Hristev
      • [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Manikandan.M at microchip.com
      • [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Sumit Garg
      • [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Eugen Hristev
      • [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Sumit Garg
  • [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Alexander Dahl
    • [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Sumit Garg
• [PATCH 0/2] power: regulator: add qcom usb vbus   Rui Miguel Silva
  • [PATCH 1/2] mach-snapdragon: of_fixup: fix property length at writing   Rui Miguel Silva
    • [PATCH 1/2] mach-snapdragon: of_fixup: fix property length at writing   Neil Armstrong
  • [PATCH 2/2] power: regulator: add qcom-usb-vbus   Rui Miguel Silva
• [PATCH 1/2] imx93_evk: Pass kernel_addr_r   Fabio Estevam
  • [PATCH 2/2] imx8mp_evk: Pass kernel_addr_r   Fabio Estevam
    • [PATCH 2/2] imx8mp_evk: Pass kernel_addr_r   Peng Fan
  • [PATCH 1/2] imx93_evk: Pass kernel_addr_r   Peng Fan
    • [PATCH 1/2] imx93_evk: Pass kernel_addr_r   Fabio Estevam
• [PATCH v5 0/6] Add pmem node for preserving distro ISO's   Sughosh Ganu
  • [PATCH v5 1/6] fdt: add support for adding pmem nodes   Sughosh Ganu
  • [PATCH v5 2/6] efi_loader: add a function to remove memory from the EFI map   Sughosh Ganu
  • [PATCH v5 3/6] efi_loader: preserve installer images in pmem   Sughosh Ganu
  • [PATCH v5 4/6] blkmap: store type of blkmap slice in corresponding structure   Sughosh Ganu
    • [PATCH v5 4/6] blkmap: store type of blkmap slice in corresponding structure   Tobias Waldekranz
    • [PATCH v5 4/6] blkmap: store type of blkmap slice in corresponding structure   Ilias Apalodimas
  • [PATCH v5 5/6] blkmap: add an attribute to preserve the mem mapping   Sughosh Ganu
    • [PATCH v5 5/6] blkmap: add an attribute to preserve the mem mapping   Tobias Waldekranz
    • [PATCH v5 5/6] blkmap: add an attribute to preserve the mem mapping   Ilias Apalodimas
  • [PATCH v5 6/6] blkmap: pass information on ISO image to the OS   Sughosh Ganu
    • [PATCH v5 6/6] blkmap: pass information on ISO image to the OS   Sughosh Ganu
    • [PATCH v5 6/6] blkmap: pass information on ISO image to the OS   Tobias Waldekranz
      • [PATCH v5 6/6] blkmap: pass information on ISO image to the OS   Sughosh Ganu
• [PATCH v2] configs: am65x_evm_r5_usbdfu_defconfig: Fix USB DFU boot   Hrushikesh Salunke
• [PATCH] MAINTAINERS: .mailmap: Update Sumit Garg's email address   Sumit Garg
• [PATCH v3 0/6] Fix page permission on arm64 architectures   Ilias Apalodimas
  • [PATCH v3 1/6] meminfo: add memory details for armv8   Ilias Apalodimas
  • [PATCH v3 2/6] doc: update meminfo with arch specific information   Ilias Apalodimas
  • [PATCH v3 3/6] arm: Prepare linker scripts for memory permissions   Ilias Apalodimas
  • [PATCH v3 4/6] arm64: mmu_change_region_attr() add an option not to break PTEs   Ilias Apalodimas
    • [PATCH v3 4/6] arm64: mmu_change_region_attr() add an option not to break PTEs   Ilias Apalodimas
  • [PATCH v3 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
  • [PATCH v3 6/6] arm64: Enable RW, RX and RO mappings for the relocated binary   Ilias Apalodimas
• [GIT PULL] Please pull u-boot-imx-master-20250227   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-master-20250227   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20250127   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-next-20250127   Tom Rini
• [PATCH] tools: imximage: Fix potential memory leak   Fabio Estevam
• [PATCH v2] siemens: common: Make DDR_SI_TEST depend on TARGET_CAPRICORN   Fabio Estevam
• [PATCH v3] ARM: dts: imxrt1050: Migrate to OF_UPSTREAM   Fabio Estevam
• [PATCH 0/5] Simplifiy retrieving FDT from SBI in S-Mode   Yao Zi
  • [PATCH 1/5] riscv: lib: Add a default implementation of board_fdt_blob_setup   Yao Zi
  • [PATCH 2/5] board: qemu: riscv: Remove duplicated board_fdt_blob_setup   Yao Zi
  • [PATCH 3/5] board: starfive: Remove duplicated board_fdt_blob_setup   Yao Zi
  • [PATCH 4/5] board: sifive: Remove duplicated board_fdt_blob_setup   Yao Zi
  • [PATCH 5/5] riscv: select OF_HAS_PRIOR_STAGE by default if SBI is enabled   Yao Zi
• [PATCH] mmc: fsl_esdhc: Migrate ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE to Kconfig   Tom Rini
  • [PATCH] mmc: fsl_esdhc: Migrate ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE to Kconfig   Peng Fan
• [PATCH 0/5] net: lwip: root certificates   Jerome Forissier
  • [PATCH 1/5] net: lwip: extend wget to support CA (root) certificates   Jerome Forissier
    • [PATCH 1/5] net: lwip: extend wget to support CA (root) certificates   Ilias Apalodimas
  • [PATCH 2/5] lwip: tls: enforce checking of server certificates based on CA availability   Jerome Forissier
    • [PATCH 2/5] lwip: tls: enforce checking of server certificates based on CA availability   Ilias Apalodimas
  • [PATCH 3/5] lwip: tls: warn when no CA exists amd log certificate validation errors   Jerome Forissier
    • [PATCH 3/5] lwip: tls: warn when no CA exists amd log certificate validation errors   Ilias Apalodimas
  • [PATCH 4/5] net: lwip: add support for built-in root certificates   Jerome Forissier
    • [PATCH 4/5] net: lwip: add support for built-in root certificates   Jerome Forissier
  • [PATCH 5/5] configs: qemu_arm64_lwip_defconfig: enable WGET_CACERT and MBEDTLS_LIB_X509_PEM   Jerome Forissier
    • [PATCH 5/5] configs: qemu_arm64_lwip_defconfig: enable WGET_CACERT and MBEDTLS_LIB_X509_PEM   Ilias Apalodimas
  • [PATCH 0/5] net: lwip: root certificates   Simon Glass
    • [PATCH 0/5] net: lwip: root certificates   Jerome Forissier
  • [PATCH 0/5] net: lwip: root certificates   Tom Rini
    • [PATCH 0/5] net: lwip: root certificates   Jerome Forissier
      • [PATCH 0/5] net: lwip: root certificates   Ilias Apalodimas
      • [PATCH 0/5] net: lwip: root certificates   Jerome Forissier
• [PATCH] imx9: container.cfg: Guard tee.bin inclusion   Fabio Estevam
  • [PATCH] imx9: container.cfg: Guard tee.bin inclusion   Peng Fan
• [PATCH] mach-k3: common_fdt: create a reserved memory node   Bryan Brattlof
  • [PATCH] mach-k3: common_fdt: create a reserved memory node   Andrew Davis
    • [PATCH] mach-k3: common_fdt: create a reserved memory node   Bryan Brattlof
• [PATCH v3 0/4] xPL-stack cleanup   Simon Glass
  • [PATCH v3 2/4] spl: Add an SPL_HAVE_INIT_STACK option   Simon Glass
• [PATCH v3 1/4] tpl: Rename TPL_NEEDS_SEPARATE_STACK to TPL_HAVE_INIT_STACK   Simon Glass
• [PATCH v3 3/4] spl: Use CONFIG_VAL() to obtain the SPL stack   Simon Glass
• [PATCH v3 4/4] arm: Support a separate stack for VPL   Simon Glass
• [PATCH] qconfig: Correct unhashable-type error with --scan-source   Simon Glass
• [PATCH] patman: Show the base commit and branch   Simon Glass
• [PATCH] cmd: Drop last reference to CMD_REISERFS   Tom Rini
  • [PATCH] cmd: Drop last reference to CMD_REISERFS   Peter Robinson
• [PATCH 1/2] usb: gadget: Remove final remnants of CONFIG_USB_DEVICE   Tom Rini
  • [PATCH 2/2] usb: gadget: Remove the legacy usbtty driver   Tom Rini
    • [PATCH 2/2] usb: gadget: Remove the legacy usbtty driver   Mattijs Korpershoek
  • [PATCH 1/2] usb: gadget: Remove final remnants of CONFIG_USB_DEVICE   Mattijs Korpershoek
• [PATCH] Kconfig: Introduce CONFIG_WERROR   Paul Barker
  • [PATCH] Kconfig: Introduce CONFIG_WERROR   Paul Barker
• [PATCH] pinctrl: renesas: Fix RZN1 symbol name   Marek Vasut
  • [PATCH] pinctrl: renesas: Fix RZN1 symbol name   Paul Barker
    • [PATCH] pinctrl: renesas: Fix RZN1 symbol name   Marek Vasut
• [PATCH v2] board: ti: j784s4: Update Resource Management configs   Neha Malcom Francis
  • [PATCH v2] board: ti: j784s4: Update Resource Management configs   Kumar, Udit
• [PATCH V2] board: freescale: fix LS1021a build   Peng Fan (OSS)
• [PATCH v6 0/6] Add pmem node for preserving distro ISO's   Sughosh Ganu
  • [PATCH v6 1/6] fdt: add support for adding pmem nodes   Sughosh Ganu
  • [PATCH v6 2/6] efi_loader: add a function to remove memory from the EFI map   Sughosh Ganu
  • [PATCH v6 3/6] efi_loader: preserve installer images in pmem   Sughosh Ganu
  • [PATCH v6 4/6] blkmap: store type of blkmap slice in corresponding structure   Sughosh Ganu
  • [PATCH v6 5/6] blkmap: add an attribute to preserve the mem mapping   Sughosh Ganu
  • [PATCH v6 6/6] blkmap: pass information on ISO image to the OS   Sughosh Ganu
• [PATCH v2] usb: dwc3: am62: Use UCLASS_NOP for glue driver   Mattijs Korpershoek
• [PATCH] Revert "mtd: spi-nor: Remove recently added SST special case"   Prasad Kummari
• [PATCH v1 0/2] Support Apalis/Colibri imx6 v1.2   Francesco Dolcini
  • [PATCH v1 0/2] Support Apalis/Colibri imx6 v1.2   Ernest Van Hoecke
    • [PATCH v1 1/2] board: toradex: apalis/colibri imx6: Detect new v1.2 SoM variant   Ernest Van Hoecke
    • [PATCH v1 2/2] toradex: apalis/colibri imx6: Select correct DTB for SoM v1.2+   Ernest Van Hoecke
    • [PATCH v1 0/2] Support Apalis/Colibri imx6 v1.2   Fabio Estevam
• [PATCH v2] Kconfig: Introduce CONFIG_WERROR   Paul Barker
• Re-installation of device-tree as EFI configuration table   Sughosh Ganu
  • Re-installation of device-tree as EFI configuration table   Heinrich Schuchardt
    • Re-installation of device-tree as EFI configuration table   Sughosh Ganu
• [PATCH v6 00/20] imx: add i.MX95 support   Alice Guo (OSS)
  • [PATCH v6 01/20] mailbox: add i.MX Messaging Unit (MU) driver   Alice Guo (OSS)
    • [PATCH v6 01/20] mailbox: add i.MX Messaging Unit (MU) driver   Marek Vasut
  • [PATCH v6 02/20] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
    • [PATCH v6 02/20] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
  • [PATCH v6 03/20] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
    • [PATCH v6 03/20] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Marek Vasut
  • [PATCH v6 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Alice Guo (OSS)
    • [PATCH v6 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Marek Vasut
  • [PATCH v6 05/20] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Alice Guo (OSS)
  • [PATCH v6 06/20] scmi_protocols: add SCMI Performance domain management protocol message IDs   Alice Guo (OSS)
  • [PATCH v6 07/20] clk: scmi: add the command CLOCK_PARENT_SET   Alice Guo (OSS)
  • [PATCH v6 08/20] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo (OSS)
    • [PATCH v6 08/20] clk: scmi: check the clock state/parent/rate control permissions   Marek Vasut
  • [PATCH v6 09/20] sandbox: add SCMI clock control permissions to sandbox   Alice Guo
  • [PATCH v6 10/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
    • [PATCH v6 10/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Marek Vasut
  • [PATCH v6 11/20] imx9: scmi: add i.MX95 SoC and clock related code   Alice Guo (OSS)
  • [PATCH v6 12/20] spl: imx: use trampoline buffer to load images to secure region   Alice Guo (OSS)
  • [PATCH v6 13/20] imx9: add i.MX95 Kconfig and Makefile   Alice Guo (OSS)
  • [PATCH v6 14/20] imx: Kconfig: IMX8_ROMAPI is not configured for i.MX95   Alice Guo (OSS)
  • [PATCH v6 15/20] binman: add a new entry type for packing DDR PHY firmware images   Alice Guo (OSS)
  • [PATCH v6 16/20] tools: imx8image: add i.MX95 support   Alice Guo (OSS)
  • [PATCH v6 17/20] imx: add V2X container support on i.MX95   Alice Guo (OSS)
  • [PATCH v6 18/20] doc: imx: add document for i.MX95 Image Container Format   Alice Guo (OSS)
  • [PATCH v6 19/20] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
  • [PATCH v6 20/20] Makefile: add some files to CLEAN_FILES   Alice Guo
• [PATCH] rockchip: rk3308: Drop unused rk_board_init()   Kever Yang
• [PATCH] rockchip: nanopi-r3s-rk3566: disable unneeded CONFIG_NVME_PCI   Kever Yang
• [PATCH v2] pinctrl: renesas: Drop special RZN1 entry from Makefile   Marek Vasut
  • [PATCH v2] pinctrl: renesas: Drop special RZN1 entry from Makefile   Paul Barker
• [PATCH v4 0/4] xPL-stack cleanup   Simon Glass
  • [PATCH v4 2/4] spl: Add an SPL_HAVE_INIT_STACK option   Simon Glass
• [PATCH v4 1/4] tpl: Rename TPL_NEEDS_SEPARATE_STACK to TPL_HAVE_INIT_STACK   Simon Glass
• [PATCH v4 3/4] spl: Use CONFIG_VAL() to obtain the SPL stack   Simon Glass
• [PATCH v4 4/4] arm: Support a separate stack for VPL   Simon Glass
• [PATCH v3 1/4] net: phy: Port set/clear bits from Linux   Paul Barker
  • [PATCH v3 2/4] net: phy: ksz90x1: Handle ksz9131 LED errata   Paul Barker
  • [PATCH v3 3/4] net: phy: ksz90x1: Load skew values from device tree   Paul Barker
  • [PATCH v3 4/4] net: phy: ksz90x1: Simplify ksz9131_config_rgmii_delay   Paul Barker
• [PATCH] smbios: add support for type 9 system slot   Raymond Mao
• [PATCH] MAINTAINERS: Update contact information for Greg Malysa   Greg Malysa
• [PATCH 1/2] arm: mach-sc5xx: Remove manual bss_clear   Greg Malysa
  • [PATCH 2/2] arm: mach-sc5xx: Remove inappropriate board-specific functions   Greg Malysa
• [PATCH] configs: mvebu_espressobin_ultra-88f3720_defconfig: disable SATA   Benjamin Schneider
• [PATCH v2] MAINTAINERS: Update contact information for Greg Malysa   Greg Malysa