April 2014 Archives by thread
Starting: Tue Apr 1 01:10:18 CEST 2014
Ending: Wed Apr 30 23:43:49 CEST 2014
Messages: 2098
- [U-Boot] [PATCH 04/10] power: Explicitly select pmic device's bus
Heiko Schocher
- [U-Boot] [PATCH 04/10] power: Explicitly select pmic device's bus
Heiko Schocher
- [U-Boot] [PATCH v4 6/9] i2c, davinci: convert driver to new mutlibus/mutliadapter framework
Heiko Schocher
- [U-Boot] [ANN] U-Boot v2014.04-rc3 released
Wolfgang Denk
- [U-Boot] [PATCH] powerpc: mpc8xx: delete an unused source file
Wolfgang Denk
- [U-Boot] [PATCH 2/3] dfu: add static alt num count in dfu_config_entities()
Przemyslaw Marczak
- [U-Boot] [PATCH] ARMv8: fix bug for flush data cache by set/way
Leo Yan
- [U-Boot] [PATCH v3 13/13] common: fixed linker-list example
Lukasz Majewski
- [U-Boot] [PATCH 1/1] imx-common: cpu: add fdt_file environment variable
Marek Vasut
- [U-Boot] [PATCH 0/4] vybrid/tower fixes and enhancements
Stefan Agner
- [U-Boot] [PATCH 1/2] arm: mxs: Adjust the load address of U-Boot and SPL for HAB
Stefano Babic
- [U-Boot] [PATCH 2/2] arm: mxs: Add support for generating signed BootStream
Stefano Babic
- [U-Boot] [PATCH] ARM: mxs: Add OCOTP driver
Stefano Babic
- [U-Boot] [PATCH] woodburn_sd: Remove CONFIG_BOOT_INTERNAL
Stefano Babic
- [U-Boot] [PATCH] ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x
Stefano Babic
- [U-Boot] [PATCH 1/2] pci: mx6: Implement power callback
Stefano Babic
- [U-Boot] [PATCH V2 2/2] ARM: mx6: Add PCIe on SabreSDP
Stefano Babic
- [U-Boot] [PATCH V2 1/4] arm: mx5: Fix memory slowness on MX53QSB
Stefano Babic
- [U-Boot] [PATCH V3 2/4] arm: mx5: Avoid hardcoding memory sizes on MX53QSB
Stefano Babic
- [U-Boot] [PATCH V2 3/4] arm: mx5: Fix memory slowness on M53EVK
Stefano Babic
- [U-Boot] [PATCH V3 4/4] arm: mx5: Avoid hardcoding memory sizes on M53EVK
Stefano Babic
- [U-Boot] [PATCH 2/2] arm: mxs: Add serial console support into SPL
Stefano Babic
- [U-Boot] [PATCH 1/2] arm: mxs: Properly set GD pointer in SPL
Stefano Babic
- [U-Boot] [PATCH v4 1/2] RiOTboard: add new board
Stefano Babic
- [U-Boot] [PATCH v7] socfpga: Adding Scan Manager driver
Pavel Machek
- [U-Boot] [PATCH 3/3] dfu: Introduction of the "dfu_checksum_method" env variable for checksum method setting
Lukasz Majewski
- [U-Boot] [PATCH 3/3] dfu: Introduction of the "dfu_checksum_method" env variable for checksum method setting
Lukasz Majewski
- [U-Boot] [PATCH] ARMv8: fix bug for flush data cache by set/way
FengHua
- [U-Boot] Xilinx Zed Board resets with Master
Michal Simek
- [U-Boot] ahci: Fix cache align error messages
Roger Quadros
- [U-Boot] ahci: Fix cache align error messages
Eli Nidam
- [U-Boot] [PATCH] ahci: Fix data abort on multiple scsi resets.
Roger Quadros
- [U-Boot] ahci: Fix data abort on multiple scsi resets.
Tom Rini
- [U-Boot] [PATCH v5 1/6] part_efi: move uuid<->string conversion functions into lib/uuid.c
Przemyslaw Marczak
- [U-Boot] [PATCH v5 6/6] trats/trats2: enable CONFIG_RANDOM_UUID
Przemyslaw Marczak
- [U-Boot] [PATCH v5 6/6] trats/trats2: enable CONFIG_RANDOM_UUID
Minkyu Kang
- [U-Boot] [PATCH v6 1/6] part_efi: move uuid<->string conversion functions into lib/uuid.c
Przemyslaw Marczak
- [U-Boot] [PATCH v6 2/6] lib: uuid: code refactor for proper maintain between uuid bin and string
Przemyslaw Marczak
- [U-Boot] [U-Boot, v6, 2/6] lib: uuid: code refactor for proper maintain between uuid bin and string
Tom Rini
- [U-Boot] [PATCH v6 4/6] new commands: uuid and guid - generate random unique identifier
Przemyslaw Marczak
- [U-Boot] [U-Boot, v6, 4/6] new commands: uuid and guid - generate random unique identifier
Tom Rini
- [U-Boot] [PATCH v6 5/6] cmd:gpt: randomly generate each partition uuid if undefined
Przemyslaw Marczak
- [U-Boot] [U-Boot, v6, 5/6] cmd:gpt: randomly generate each partition uuid if undefined
Tom Rini
- [U-Boot] [PATCH v6 6/6] trats/trats2: enable CONFIG_RANDOM_UUID
Przemyslaw Marczak
- [U-Boot] [U-Boot, v6, 6/6] trats/trats2: enable CONFIG_RANDOM_UUID
Tom Rini
- [U-Boot] [U-Boot, v6, 1/6] part_efi: move uuid<->string conversion functions into lib/uuid.c
Tom Rini
- [U-Boot] [U-Boot, v6, 1/6] part_efi: move uuid<->string conversion functions into lib/uuid.c
Przemyslaw Marczak
- [U-Boot] [PATCH v5 2/6] lib: uuid: code refactor for proper maintain between uuid bin and string
Przemyslaw Marczak
- [U-Boot] [PATCH v5 3/6] lib: uuid: add functions to generate UUID version 4
Przemyslaw Marczak
- [U-Boot] [PATCH v5 4/6] new commands: uuid and guid - generate random unique identifier
Przemyslaw Marczak
- [U-Boot] [PATCH v5 5/6] cmd:gpt: randomly generate each partition uuid if undefined
Przemyslaw Marczak
- [U-Boot] [PATCH] axs101 - increase EEPROM page write delay from 32 to 64 msec
Alexey Brodkin
- [U-Boot] why not enable ICache in vexpress_aemv8a.h
York Sun
- [U-Boot] pull request for u-boot-tegra/master info ARM/master
Stephen Warren
- [U-Boot] [PATCH v3 8/9] spi: davinci: add support for multiple bus and chip select
Karicheri, Muralidharan
- [U-Boot] [PATCH 7/10] driver/mtd/spi:Read 8KB data chunk during u-boot load in SPL
Scott Wood
- [U-Boot] [PATCH 6/10] driver/ifc: define nand_spl_load_image() for SPL
Scott Wood
- [U-Boot] [PATCH 5/10] common/env: Point default environment for GD
Scott Wood
- [U-Boot] [PATCH 8/10] Makefile: Add support of RAMBOOT_SPLPBL
Scott Wood
- [U-Boot] NAND SPL on imx6
Otavio Salvador
- [U-Boot] [PATCH 9/10] board/b4qds:Add support of 2 stage NAND boot-loader
Scott Wood
- [U-Boot] [PATCH v3 04/13] dfu: fix boards wo USB cable detection
Lukasz Majewski
- [U-Boot] [PATCH v3 06/13] USB: gadget: added a saner gadget downloader registration API
Lukasz Majewski
- [U-Boot] [PATCH v3 12/13] ums: always initialize mmc before ums_disk_init()
Lukasz Majewski
- [U-Boot] NAND SPL on imx6
Stefano Babic
- [U-Boot] [Question] bardrate both in gd_t and bd_t
Masahiro Yamada
- [U-Boot] [PATCH v2 1/2] imx: add rules for U-Boot DTB support
Stefano Babic
- [U-Boot] [PATCH] armv8: Flush dcache before switching to EL2
FengHua
- [U-Boot] CONFIG_REMAKE_ELF for aarch64
FengHua
- [U-Boot] [PATCH] config:trats2: Change u-boot's TEXT_BASE from 0x78100000 to 0x43e00000
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH 01/2] powerpc/mpc85xx:Avoid fix address of bootpg section
Prabhakar Kushwaha
- [U-Boot] [PATCH] omap3: igep00x0: fix NAND_BOOT for igep_0020 and igep_0030
Gupta, Pekon
- [U-Boot] Xilinx Zed Board resets with Master
Tim Sander
- [U-Boot] Modify go to allow chain loading a second u-boot
Helmut Raiger
- [U-Boot] Modify go to allow chain loading a second u-boot
Simon Glass
- [U-Boot] Modify go to allow chain loading a second u-boot
Helmut Raiger
- [U-Boot] Modify go to allow chain loading a second u-boot
Rob Herring
- [U-Boot] [PATCH] fs/fat: correct FAT16/12 file finding in root dir
Josh Wu
- [U-Boot] [PATCH] board/t104xrdb: Add support of CPLD
Prabhakar Kushwaha
- [U-Boot] [PATCH][v5] board/t104xrdb: Add support of CPLD
Prabhakar Kushwaha
- [U-Boot] [u-boot-release] [PATCH][v5] board/t104xrdb: Add support of CPLD
York Sun
- [U-Boot] [PATCH v3 0/3] enable support for x16 NAND devices
Pekon Gupta
- [U-Boot] [PATCH v3 1/3] mtd: nand: don't use read_buf for 8-bit ONFI transfers
Pekon Gupta
- [U-Boot] [PATCH v3 2/3] mtd: nand: omap: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width
Pekon Gupta
- [U-Boot] [PATCH v3 3/3] omap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT
Pekon Gupta
- [U-Boot] [PATCH] am33xx: add support for beaglebone NAND cape
Pekon Gupta
- [U-Boot] [PATCH v2 1/5] TI:omap5: Move CONFIG_ENV_SIZE to board config files
Tom Rini
- [U-Boot] [PATCH v2 2/5] TI:armv7: Change Falcon Mode DT load address
Tom Rini
- [U-Boot] [U-Boot, v2, 2/5] TI:armv7: Change Falcon Mode DT load address
Tom Rini
- [U-Boot] [PATCH v2 3/5] spi: ti_qspi: Add delay for successful bulk erase.
Tom Rini
- [U-Boot] [PATCH v2 3/5] spi: ti_qspi: Add delay for successful bulk erase.
Jagan Teki
- [U-Boot] [PATCH v2 3/5] spi: ti_qspi: Add delay for successful bulk erase.
Tom Rini
- [U-Boot] [PATCH v2 3/5] spi: ti_qspi: Add delay for successful bulk erase.
Sourav Poddar
- [U-Boot] [U-Boot, v2, 3/5] spi: ti_qspi: Add delay for successful bulk erase.
Tom Rini
- [U-Boot] [PATCH v2 4/5] SPL:SPI: Add Falcon Mode support
Tom Rini
- [U-Boot] [U-Boot,v2,4/5] SPL:SPI: Add Falcon Mode support
Tom Rini
- [U-Boot] [PATCH v2 5/5] dra7xx_evm: Add QSPI_4 support, qspiboot build target
Tom Rini
- [U-Boot] [U-Boot, v2, 5/5] dra7xx_evm: Add QSPI_4 support, qspiboot build target
Tom Rini
- [U-Boot] [U-Boot, v2, 1/5] TI:omap5: Move CONFIG_ENV_SIZE to board config files
Tom Rini
- [U-Boot] Start the deprecation process for generic board
Marek Vasut
- [U-Boot] Chain loading an u-boot from an u-boot
Simon Glass
- [U-Boot] Chain loading an u-boot from an u-boot
Stefano Babic
- [U-Boot] Chain loading an u-boot from an u-boot
Helmut Raiger
- [U-Boot] [PATCH 0/7] omap3: zoom1: long pending cleanups :(
Nishanth Menon
- [U-Boot] [PATCH 1/7] omap3: zoom1: enable CONFIG_SYS_GENERIC_BOARD
Nishanth Menon
- [U-Boot] [PATCH 2/7] OMAP3: zoom1: Configure GPMC for Ethernet
Nishanth Menon
- [U-Boot] [PATCH 3/7] OMAP3: zoom1: enable LAN9211
Nishanth Menon
- [U-Boot] [PATCH 4/7] omap3: zoom1: enable common network commands
Nishanth Menon
- [U-Boot] [PATCH 5/7] omap3: zoom1: disable JFFS2 and enable FS_GENERIC
Nishanth Menon
- [U-Boot] [PATCH 5/7] omap3: zoom1: disable JFFS2 and enable FS_GENERIC
Tom Rini
- [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz
Nishanth Menon
- [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz
Tom Rini
- [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz
Nishanth Menon
- [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz
Tom Rini
- [U-Boot] [PATCH 6/7] omap3: zoom1: enable bootz
Nishanth Menon
- [U-Boot] [PATCH 7/7] omap3: zoom1: fix default console
Nishanth Menon
- [U-Boot] [PATCH 0/7] omap3: zoom1: long pending cleanups :(
Tom Rini
- [U-Boot] [PATCH 0/7] omap3: zoom1: long pending cleanups :(
Nishanth Menon
- [U-Boot] [PATCH V2 0/8] omap3: zoom1: long pending cleanups :(
Nishanth Menon
- [U-Boot] [PATCH V2 0/8] omap3: zoom1: long pending cleanups :(
Tom Rini
- [U-Boot] [PATCH 0/11] Dump Orphan boards
Masahiro Yamada
- [U-Boot] [PATCH 02/11] powerpc: remove MBX and MBX860T boards support
Masahiro Yamada
- [U-Boot] [U-Boot, 02/11] powerpc: remove MBX and MBX860T boards support
Tom Rini
- [U-Boot] [PATCH 03/11] powerpc: remove genietv board support
Masahiro Yamada
- [U-Boot] [U-Boot,03/11] powerpc: remove genietv board support
Tom Rini
- [U-Boot] [PATCH 04/11] powerpc: remove ADS860, FADS823, FADS850SAR, FADS860T support
Masahiro Yamada
- [U-Boot] [U-Boot, 04/11] powerpc: remove ADS860, FADS823, FADS850SAR, FADS860T support
Tom Rini
- [U-Boot] [PATCH 05/11] powerpc: remove RPXClassic, RPXlite boards support
Masahiro Yamada
- [U-Boot] [U-Boot, 05/11] powerpc: remove RPXClassic, RPXlite boards support
Tom Rini
- [U-Boot] [PATCH 06/11] powerpc: remove RPXsuper board support
Masahiro Yamada
- [U-Boot] [U-Boot,06/11] powerpc: remove RPXsuper board support
Tom Rini
- [U-Boot] [PATCH 08/11] powerpc: remove MOUSSE board support
Masahiro Yamada
- [U-Boot] [U-Boot,08/11] powerpc: remove MOUSSE board support
Tom Rini
- [U-Boot] [PATCH 11/11] arm: remove mx31ads board support
Masahiro Yamada
- [U-Boot] [PATCH 11/11] arm: remove mx31ads board support
Wolfgang Denk
- [U-Boot] [PATCH 11/11] arm: remove mx31ads board support
Masahiro Yamada
- [U-Boot] [PATCH 11/11] arm: remove mx31ads board support
Tom Rini
- [U-Boot] [PATCH 01/11] powerpc: remove NX823 board support
Masahiro Yamada
- [U-Boot] [U-Boot,01/11] powerpc: remove NX823 board support
Tom Rini
- [U-Boot] [PATCH 07/11] powerpc: remove rsdproto board support
Masahiro Yamada
- [U-Boot] [U-Boot,07/11] powerpc: remove rsdproto board support
Tom Rini
- [U-Boot] [PATCH 09/11] powerpc: remove EVB64260 board support
Masahiro Yamada
- [U-Boot] [U-Boot,09/11] powerpc: remove EVB64260 board support
Tom Rini
- [U-Boot] [PATCH 10/11] arm: remove lubbock board support
Masahiro Yamada
- [U-Boot] [U-Boot,10/11] arm: remove lubbock board support
Tom Rini
- [U-Boot] [PATCH] boards.cfg: move more boards with invalid emails to Orphan
Masahiro Yamada
- [U-Boot] boards.cfg: move more boards with invalid emails to Orphan
Tom Rini
- [U-Boot] [PATCH v7] nand/denali: Adding Denali NAND driver support
Masahiro Yamada
- [U-Boot] CONFIG_LOADADDR vs CONFIG_SYS_LOAD_ADDR
Masahiro Yamada
- [U-Boot] [Question] i.MX6 HIgh Assurance Boot (Secure Boot) support in U-Boot versions >= 2013
Igor Bezukh
- [U-Boot] altera socfpga: mmc boot fails as soon as I enable DEBUG
Pavel Machek
- [U-Boot] Socfpga preloader signing patch
Pavel Machek
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] Fix USB keyboard polling via control endpoint
Adrian Cox
- [U-Boot] [PATCH] build:arm: Remove setting of CROSS_COMPILE environment variable
Lukasz Majewski
- [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD
Xuebing Wang
- [U-Boot] Bug in buildsystem for SPL LDSCRIPT
Andreas Bießmann
- [U-Boot] Different Port for TFTP communication
Mario Albrecht
- [U-Boot] FEC_MXC leftovers
Nikolay Dimitrov
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] CONFIG_SYS_XIP_BOOT for when it's a choice?
Wolfgang Denk
- [U-Boot] [PATCH] ARMv8: fix bug for flush data cache by set/way
Scott Wood
- [U-Boot] mx28: U-Boot fails to boot with VDD5V only power configuration
Ankur Patel
- [U-Boot] [PATCH v3 1/4]drivers: mmc: dwmmc: enable support for DT
Minkyu Kang
- [U-Boot] {PATCH v3 3/4] arm: exynos: clock: Remove exynos4x12_set_mmc_clk function
Minkyu Kang
- [U-Boot] How to disable MAC address for usb_ether
Xuebing Wang
- [U-Boot] Fwd: [Question] i.MX6 HIgh Assurance Boot (Secure Boot) support in U-Boot versions >= 2013
Igor Bezukh
- [U-Boot] Latest u-boot release on BeagleBone Black for FreeBSD
Xuebing Wang
- [U-Boot] Antw: Re: [Question] How is the Falcon mode working
Stefano Babic
- [U-Boot] U-Boot Loop
Tran, Dang
- [U-Boot] mmc changes in v2014.04-rc3 cause problems when using mmc in SPL
Hans de Goede
- [U-Boot] Different Port for TFTP communication
Nikolay Dimitrov
- [U-Boot] [PATCH v2 2/2] mx6: add example DTB for mx6qsabreauto
Masahiro Yamada
- [U-Boot] [BeagleBone Black] AM335x CPU frequency
Xuebing Wang
- [U-Boot] data abort in omap_gpio
Andreas Bießmann
- [U-Boot] Data abort in omap_gpio
Andreas Bießmann
- [U-Boot] [PATCH 04/11] MX6: add common SPL configuration
Tim Harvey
- [U-Boot] [PATCH 09/11] IMX: add additional function for pinmux using an array
Tim Harvey
- [U-Boot] [PATCH 07/11] MX6: use macro building for MX6Q/MX6DL iomux regs
Tim Harvey
- [U-Boot] AP94 u-boot network failure
donce donce
- [U-Boot] Different Port for TFTP communication
Nikolay Dimitrov
- [U-Boot] [PATCH] Enable big-endian processors to use EHCI interrupt transfers
Adrian Cox
- [U-Boot] [PATCH] Enable big-endian processors to use EHCI interrupt transfers
Adrian Cox
- [U-Boot] How can I save U-Boot env vars to HUSH shell vars.
James Chargin
- [U-Boot] How can I save U-Boot env vars to HUSH shell vars.
Wolfgang Denk
- [U-Boot] How can I save U-Boot env vars to HUSH shell vars.
James Chargin
- [U-Boot] How can I save U-Boot env vars to HUSH shell vars.
Wolfgang Denk
- [U-Boot] How can I save U-Boot env vars to HUSH shell vars.
James Chargin
- [U-Boot] How can I save U-Boot env vars to HUSH shell vars.
Wolfgang Denk
- [U-Boot] [PATCH] Powerpc/mpc8536DS: Increase SPI/SD uboot Image size to 768K
Haijun Zhang
- [U-Boot] [PATCH] Powerpc/mpc8536DS: Increase SPI/SD uboot Image size to 768K
York Sun
- [U-Boot] [PATCH 1/2] musb-new, dfu: first send request answer then call completions
Heiko Schocher
- [U-Boot] [PATCH 1/2] musb-new, dfu: first send request answer then call completions
Marek Vasut
- [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function
Heiko Schocher
- [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function
Marek Vasut
- [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function
Pantelis Antoniou
- [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function
Lukasz Majewski
- [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function
Heiko Schocher
- [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function
Lukasz Majewski
- [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function
Heiko Schocher
- [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function
Lukasz Majewski
- [U-Boot] [PATCH 2/2] dfu, nand: add medium specific polltimeout function
Marek Vasut
- [U-Boot] [u-boot][coreboot-x86] Incremental Make fails
Hua Yanghao
- [U-Boot] mx28: U-Boot fails to boot with VDD5V only power configuration
Ankur Patel
- [U-Boot] [RFC] am33xx: add spread spectrum clock (SSC) support
Yegor Yefremov
- [U-Boot] board/freescale/mx6slevk: Add support for SPI NOR on the Freescale MCIMX6SLEVK Board
Sam Catch
- [U-Boot] Strange CFI flash problem
Matthias Weißer
- [U-Boot] [PATCH] board: samsung: delete unused source files
Mateusz Zalega
- [U-Boot] [PATCH v4 6/6] PPC 85xx: Add qemu-ppce500 machine
Alexander Graf
- [U-Boot] [PATCH 1/1] Read mmc device memory capacity from EXT_CSD if memory is addressed by sector
Frank Bormann
- [U-Boot] [PATCH] AR8035/phy: Enable autonegotiation function for ar8035
Scott Wood
- [U-Boot] board/freescale/mx6slevk: Add support for SPI NOR on the Freescale MCIMX6SLEVK Board
Nikolay Dimitrov
- [U-Boot] [PATCH v2 1/9] sunxi: initial sun7i clocks and timer support.
Ian Campbell
- [U-Boot] [PATCH v2 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work
Heiko Schocher
- [U-Boot] [PATCH v2 2/2] arm: kzm9g: Add CONFIG_SYS_GENERIC_BOARD
Heiko Schocher
- [U-Boot] [PATCH 0/3] mpc83xx: add support for the ids8313 board
Heiko Schocher
- [U-Boot] Micron PC28F00AP30 flash support
Andy Pont
- [U-Boot] [PATCH 6/9] fdt_support: add 'const' qualifier for unchanged argument.
Masahiro Yamada
- [U-Boot] [PATCH] kbuild: create a build directory automatically for out-of-tree build
Masahiro Yamada
- [U-Boot] am33xx : bit-flip correction in oob
Belisko Marek
- [U-Boot] [PATCH] bootm: set max decompression size for LZO
Kees Cook
- [U-Boot] Interrupt autoboot by GPIO
Florian Meier
- [U-Boot] [U-boot] 2014.04 release code boot failed on ARMv8 FVP model
TigerLiu at via-alliance.com
- [U-Boot] [PATCH] ARM: exynos: remove the unused code
Jaehoon Chung
- [U-Boot] ocotp
Nogradi Peter
- [U-Boot] FSL eSPI driver is a mess, hack attached.
York Sun
- [U-Boot] [PATCH v7 3/3] T1040QDS/U-QE: Add u-qe support to t1040qds
York Sun
- [U-Boot] [PATCH v7 3/3] T1040QDS/U-QE: Add u-qe support to t1040qds
York Sun
- [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB
yasuhisa umano
- [U-Boot] [PATCH 2/2] usb: r8a66597: Fix initilization size of r8a66597 info, structure
yasuhisa umano
- [U-Boot] [U-boot] Is there generic code to detect nand chip's ecc bits?
TigerLiu at via-alliance.com
- [U-Boot] [PATCH 06/11] MX6: add struct for sharing data between SPL and uboot
Stefano Babic
- [U-Boot] support for maxim dallas rtcds1347
RAGHAVENDRA GANIGA
- [U-Boot] [PATCH 1/2 v2] usb: r8a66597: Fix initialization hub that using R8A66597_MAX_ROOT_HUB
Yasuhisa Umano
- [U-Boot] [PATCH 2/2 v2] usb: r8a66597: Fix initilization size of r8a66597 info structure
Yasuhisa Umano
- [U-Boot] [PATCH v2 7/8] cmd_mmc.c: Add bootbus mmc sub-command
Michael Trimarchi
- [U-Boot] FIT image AES support and PPC4xx/85xx boards
Tom Rini
- [U-Boot] cosmetic: README.scrapyard: sort in reverse chronological order
Tom Rini
- [U-Boot] cosmetic: README.scrapyard: fix false removed date and commit
Tom Rini
- [U-Boot] board: esd: remove remainders of dead boards
Tom Rini
- [U-Boot] mtd: delete unused files
Tom Rini
- [U-Boot] floppy: delete unused files
Tom Rini
- [U-Boot] board: samsung: delete unused source files
Tom Rini
- [U-Boot] board: evb64260: delete an unused source file
Tom Rini
- [U-Boot] board: altera: delete unused source files
Tom Rini
- [U-Boot] board: ppmc8260: delete an unused source file
Tom Rini
- [U-Boot] board: sandpoint: delete an unused source file
Tom Rini
- [U-Boot] standalone: delete an unused source file
Tom Rini
- [U-Boot] board: Marvell: delete an unused source file
Tom Rini
- [U-Boot] board: prodrive: delete unused source files
Tom Rini
- [U-Boot] board: dave: delete unused source files
Tom Rini
- [U-Boot] board: hidden_dragon: remove an unused source file
Tom Rini
- [U-Boot] kbuild: use boolean macros to select tegra*-common directory
Tom Rini
- [U-Boot] kbuild: do not use $(BOARD) to specify exact object name
Tom Rini
- [U-Boot] [PATCH 0/3 v2] ARM: OMAP: replace custom sr32() by standard I/O accessors
Tom Rini
- [U-Boot] [PATCH 0/3] OMAP3: support fake USB Ethernet MAC address for OMAP3 BeagleBoard-XM
Tom Rini
- [U-Boot] [U-Boot, v3, 01/10] fw_env.c: Switch get_config to use '%ms' in sscanf
Tom Rini
- [U-Boot] [U-Boot, v3, 02/10] env_mmc.c: Allow environment to be used within SPL
Tom Rini
- [U-Boot] [U-Boot, v3, 03/10] env_mmc.c: Remove NULL check on tmp_env1/2
Tom Rini
- [U-Boot] [U-Boot, v3, 04/10] mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPL
Tom Rini
- [U-Boot] [U-Boot, v3, 05/10] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL
Tom Rini
- [U-Boot] [U-Boot, v3, 06/10] am335x_evm: Make SPL_OS also check the boot_os variable for falcon mode
Tom Rini
- [U-Boot] [U-Boot, v3, 07/10] README: Add CONFIG_SPL_OS_BOOT to README
Tom Rini
- [U-Boot] [U-Boot, v3, 08/10] README.falcon: Document environment variables for falcon mode
Tom Rini
- [U-Boot] [U-Boot, v3, 09/10] a3m071: Make spl_start_uboot test like getenv_yesno does
Tom Rini
- [U-Boot] [U-Boot, v3, 10/10] spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what to boot
Tom Rini
- [U-Boot] [U-Boot, v2, 1/3] TI: Add, use a DEFAULT_LINUX_BOOT_ENV environment string
Tom Rini
- [U-Boot] [U-Boot, v2, 2/3] am335x_evm: Update the ramdisk args, we pass things in just fine via DT
Tom Rini
- [U-Boot] [U-Boot, v2, 3/3] am43xx_evm: Update the ramdisk args, we pass things in just fine via DT
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [trini at ti.com: [PATCH] ARM:tegra20: Remove aes debug prints]
Tom Warren
- [U-Boot] [U-Boot, V2, 2/4] aes: Move the AES-128-CBC encryption function to common code
Stephen Warren
- [U-Boot] [PATCH v3 0/9] sunxi: initial upstreamining effort
Ian Campbell
- [U-Boot] [linux-sunxi] Uboot error: address not aligned in v7_dcache_inval_range
Ian Campbell
- [U-Boot] [PATCH] rtc: add support maxim dallas rtc ds1347
RAGHAVENDRA GANIGA
- [U-Boot] [linux-sunxi] Re: [PATCH 2/3] net/designware: invalidate entire descriptor in dw_eth_send
Ian Campbell
- [U-Boot] [PATCH 2/2] patman: Avoid duplicate sign-offs
Simon Glass
- [U-Boot] patchwork down again?
York Sun
- [U-Boot] Some PowerPC boards are broken
Masahiro Yamada
- [U-Boot] Some PowerPC boards are broken
Heiko Schocher
- [U-Boot] [PATCH][v2] powerpc/T4QDS: add two stage boot of nand/sd
shh.xie at gmail.com
- [U-Boot] [PATCH] powerpc/85xx: add T4080 SoC support
Shengzhou Liu
- [U-Boot] [PATCH ][v3] powerpc/T4QDS: add two stage boot of nand/sd
shh.xie at gmail.com
- [U-Boot] [RFC PATCH 0/3] Remove CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD}
Masahiro Yamada
- [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support
Masahiro Yamada
- [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support
Wolfgang Denk
- [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support
Masahiro Yamada
- [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support
Stephen Warren
- [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support
Masahiro Yamada
- [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support
Wolfgang Denk
- [U-Boot] [RFC PATCH 1/3] env: drop CONFIG_ENV_VARS_UBOOT_CONFIG support
Masahiro Yamada
- [U-Boot] [RFC PATCH 2/3] cmd_pxe: remove SoC, ARCH path from pxe_default_path
Masahiro Yamada
- [U-Boot] [RFC PATCH 2/3] cmd_pxe: remove SoC, ARCH path from pxe_default_path
Rob Herring
- [U-Boot] [RFC PATCH 2/3] cmd_pxe: remove SoC, ARCH path from pxe_default_path
Stephen Warren
- [U-Boot] [RFC PATCH 3/3] mkconfig: Do not define CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD} in config.h.
Masahiro Yamada
- [U-Boot] [RFC PATCH 3/3] mkconfig: Do not define CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD} in config.h.
Stephen Warren
- [U-Boot] [RFC PATCH 3/3] mkconfig: Do not define CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD} in config.h.
Lukasz Majewski
- [U-Boot] [PATCH 1/2] powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb
Aneesh Bansal
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB
Aneesh Bansal
- [U-Boot] [PATCH] powerpc/fman/memac: use default MDIO_HOLD value
shh.xie at gmail.com
- [U-Boot] [PATCH] exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DT
andrey.konovalov at linaro.org
- [U-Boot] [PATCH] exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DT
Marek Vasut
- [U-Boot] [PATCH 1/8] wandboard: Convert to generic board
Fabio Estevam
- [U-Boot] [PATCH 2/8] mx53loco: Convert to generic board
Fabio Estevam
- [U-Boot] [PATCH 4/8] mx53ard: Convert to generic board
Fabio Estevam
- [U-Boot] [PATCH 5/8] mx53smd: Convert to generic board
Fabio Estevam
- [U-Boot] [PATCH 7/8] udoo: Convert to generic board
Fabio Estevam
- [U-Boot] [PATCH 1/8] wandboard: Convert to generic board
Stefano Babic
- [U-Boot] [PATCH 1/8] wandboard: Convert to generic board
Stefano Babic
- [U-Boot] [PATCH 1/8] wandboard: Convert to generic board
Fabio Estevam
- [U-Boot] [PATCH 1/8] wandboard: Convert to generic board
Stefano Babic
- [U-Boot] [PATCH 3/8] mx6sabre_common: Convert to generic board
Fabio Estevam
- [U-Boot] [PATCH 6/8] mx53evk: Convert to generic board
Fabio Estevam
- [U-Boot] [PATCH 8/8] hummingboard: Convert to generic board
Fabio Estevam
- [U-Boot] [PATCH] doc: README.generic-board: Fix typo
Fabio Estevam
- [U-Boot] [PATCH] doc: README.generic-board: Fix typo
Simon Glass
- [U-Boot] [PATCH 1/6] ARM: tegra: allow pinmux mux option not to be set by init tables
Stephen Warren
- [U-Boot] [PATCH 6/6] ARM: tegra: update Venice2 pinmux
Stephen Warren
- [U-Boot] [PATCH 2/6] ARM: tegra: add GPIO initialization table function
Stephen Warren
- [U-Boot] [PATCH 3/6] ARM: tegra: add function to enable input clamping on tristate
Stephen Warren
- [U-Boot] [PATCH 4/6] ARM: tegra: make use of GPIO init table on Jetson TK1
Stephen Warren
- [U-Boot] [PATCH 5/6] ARM: tegra: clamp inputs on Jetson TK1
Stephen Warren
- [U-Boot] [PATCH 0/4] ventana: Add LTC3676 PMIC support
Tim Harvey
- [U-Boot] [PATCH 3/4] power: Add support for LTC3676 PMIC
Tim Harvey
- [U-Boot] [PATCH 3/4] power: Add support for LTC3676 PMIC
Stefano Babic
- [U-Boot] [PATCH 4/4] [PATCH] ventana: Add support for the LTC3676 PMIC
Tim Harvey
- [U-Boot] [PATCH 4/4] [PATCH] ventana: Add support for the LTC3676 PMIC
Stefano Babic
- [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics
Tim Harvey
- [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics
Stefano Babic
- [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics
Tim Harvey
- [U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics
Stefano Babic
- [U-Boot] [PATCH 2/4] ventana: use non-generic pfuze100 init
Tim Harvey
- [U-Boot] [PATCH 0/4] imx25: Add hardware support
dietho at gmx.de
- [U-Boot] [PATCH 3/4] zmx25: Add extended support for the cpu and base boards
dietho at gmx.de
- [U-Boot] [PATCH 4/4] Update of the company logo
dietho at gmx.de
- [U-Boot] [PATCH 1/4] imx25: Add new hardware registers
dietho at gmx.de
- [U-Boot] [PATCH 2/4] video: Add support for imx25 lcd controller
dietho at gmx.de
- [U-Boot] [PATCH] powerpc/t208x: enable errata A006261, A006593, A006379
Shengzhou Liu
- [U-Boot] High Assurance Booting
Jyoti Dubey
- [U-Boot] [PATCH 01/2] powerpc/mpc85xx:Avoid fix address of bootpg section
York Sun
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx:Update MONITOR_LEN for 768KB u-boot size
York Sun
- [U-Boot] [PATCH 1/2] driver/ddr/fsl: Add DDR4 support to Freescale DDR driver
York Sun
- [U-Boot] [PATCH 2/2] mpc85xx/T1040QDS_D4: Add DDR4 support
York Sun
- [U-Boot] [PATCH] fsl/usb: Workaround for USB erratum-A007075
York Sun
- [U-Boot] [PATCH][v2] board/b4860qds:Slow MDC clock to comply IEEE specs in PBI config
York Sun
- [U-Boot] powerpc/t208xqds: fix nor chip selection when nand boot
York Sun
- [U-Boot] [PATCH] driver/mmc: fix compile warnings
York Sun
- [U-Boot] [U-BOOT] [PATCH v3] powerpc/t104xrdb: Unification of T104xRDB header files
York Sun
- [U-Boot] [PATCH v2] powerpc/cpu/mpc85xx: Add MAC address for layer 2 switch
York Sun
- [U-Boot] [PATCH v7 1/3] QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR
York Sun
- [U-Boot] [PATCH v7 2/3] QE/U-QE: Add U-QE support
York Sun
- [U-Boot] [PATCH v7 3/3] T1040QDS/U-QE: Add u-qe support to t1040qds
York Sun
- [U-Boot] [PATCH] t1040rdb/qe: add QE support for T1040RDB
York Sun
- [U-Boot] [PATCH][v2] powerpc/p1010rdb: SECURE BOOT enabled for NAND
York Sun
- [U-Boot] [PATCH 2/3] powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399
York Sun
- [U-Boot] [PATCH][v2] powerpc/mpc8xxx: SECURE BOOT- Disable law 0 for non PBL platforms
York Sun
- [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for BSC9132QDS
York Sun
- [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS
York Sun
- [U-Boot] [PATCH 1/4][v7] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS
York Sun
- [U-Boot] [PATCH 2/4] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T4240QDS and T4160QDS
York Sun
- [U-Boot] [PATCH 3/4] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080QDS
York Sun
- [U-Boot] [PATCH 4/4] powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T1040QDS and T1040RDB
York Sun
- [U-Boot] [PATCH] fsl/usb: Fix phy type for Second USB controller
York Sun
- [U-Boot] [PATCH] driver/fsl_ifc: Add a function to finalize CS0 address binding
York Sun
- [U-Boot] [PATCH] net/phy: Fix PHY id for VSC8514
York Sun
- [U-Boot] [PATCH] powerpc/85xx: Fix e6500 L2 cache stash IDs
York Sun
- [U-Boot] [PATCH 1/2 v2] mpc85xx: Add support for the supplement configuration unit register
York Sun
- [U-Boot] Please pull u-boot-mpc85xx master
York Sun
- [U-Boot] [PATCH V2] 4xx: add support for new PMC440 revision with cleanup
Stefan Roese
- [U-Boot] Please pull u-boot-ppc4xx/master
Stefan Roese
- [U-Boot] [PATCH] kbuild: Fix trailing whitespaces
Michal Simek
- [U-Boot] iMX6 PCie inbound traffic not working
"David Müller (ELSOFT AG)"
- [U-Boot] MMC: proposal to support multiple physical partitions
Steve Rae
- [U-Boot] iMX6 PCie inbound traffic not working
"David Müller (ELSOFT AG)"
- [U-Boot] [PATCH 1/9] fpga: spartan2: Avoid CamelCase
Michal Simek
- [U-Boot] [PATCH 0/18] ARM zynq changes
Michal Simek
- [U-Boot] [PATCH 1/2] net: zynq: Use predefined macros instead of hardcoded value
Michal Simek
- [U-Boot] [PATCH] i2c: zynq: Fixed compilation errors when using DEBUG
Michal Simek
- [U-Boot] [PATCH] sf: params: Added support for Spansion S25FL512S_512K
Michal Simek
- [U-Boot] [PATCH] fat: Define MAX_CLUSTSIZE only if not defined in config
Michal Simek
- [U-Boot] [PATCH] env_eeprom: Assign default environment during board_init_f
Michal Simek
- [U-Boot] [PATCH 1/2] serial: zynq: Remove sparse warnings
Michal Simek
- [U-Boot] ARM: zynq: sdhci clock frequency init question
Krunal Desai
- [U-Boot] [PATCH] Start the deprecation process for generic board
York Sun
- [U-Boot] Open Source Organizational Culture
Storm-Olsen, Marius
- [U-Boot] [PATCH] sh: delete an unused source file
Masahiro Yamada
- [U-Boot] [RFC] Kconfig: MAINTAINERS file or not?
Masahiro Yamada
- [U-Boot] [PATCH v4 6/6] PPC 85xx: Add qemu-ppce500 machine
York Sun
- [U-Boot] IPv6 in U-BOOT
chris packham
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [PATCH] ARM: exynos: remove the unused code
Jaehoon Chung
- [U-Boot] [PATCHv2] ARM: exynos: remove the unused code
Jaehoon Chung
- [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Masahiro Yamada
- [U-Boot] Unable to create BOOT.BIN using zynq-boot-bin.py
Heshsham Abdul Basit
- [U-Boot] [Question] Linux Boot with u-boot 2014.04 on Zynq board
Masahiro Yamada
Last message date:
Wed Apr 30 23:43:49 CEST 2014
Archived on: Tue May 6 20:49:15 CEST 2014
This archive was generated by
Pipermail 0.09 (Mailman edition).