November 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Nov 1 00:00:08 CET 2012
Ending: Fri Nov 30 23:10:01 CET 2012
Messages: 2435

• [U-Boot] Merging device trees at runtime for module-based systems   Daniel Mack
  • [U-Boot] Merging device trees at runtime for module-based systems   Stephen Warren
    • [U-Boot] Merging device trees at runtime for module-based systems   Daniel Mack
  • [U-Boot] Merging device trees at runtime for module-based systems   Mitch Bradley
  • [U-Boot] Merging device trees at runtime for module-based systems   Grant Likely
• [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Simon Glass
  • [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Simon Glass
    • [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Tom Rini
    • [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Andy Fleming
    • [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Simon Glass
    • [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Tom Rini
• [U-Boot] [PATCH 1/2] WIP: Changes to patman libraries   Simon Glass
  • [U-Boot] [PATCH 1/2] WIP: Changes to patman libraries   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] WIP: Changes to patman libraries   Simon Glass
      • [U-Boot] [PATCH 1/2] WIP: Changes to patman libraries   Simon Glass
• [U-Boot] [PATCH] common: Link with GCC instead of LD   Wolfgang Denk
  • [U-Boot] [PATCH] common: Link with GCC instead of LD   Tom Rini
• [U-Boot] [PATCH 20/20] x86: config: Enable AHCI support for coreboot   Simon Glass
  • [U-Boot] [PATCH] usb gadget ether: Fix warning in is_eth_addr_valid()   Tom Rini
  • [U-Boot] [PATCH] usb gadget ether: Fix warning in is_eth_addr_valid()   Joe Hershberger
  • [U-Boot] [PATCH] usb gadget ether: Fix warning in is_eth_addr_valid()   Tom Rini
• [U-Boot] [PATCH] common: Link with GCC instead of LD   Wolfgang Denk
  • [U-Boot] [PATCH] common: Link with GCC instead of LD   Marek Vasut
    • [U-Boot] [PATCH] common: Link with GCC instead of LD   Wolfgang Denk
      • [U-Boot] [PATCH] common: Link with GCC instead of LD   Marek Vasut
• [U-Boot] [PATCH] WIP: cbfs: Add docbook template   Marek Vasut
  • [U-Boot] [PATCH] WIP: cbfs: Add docbook template   Simon Glass
    • [U-Boot] [PATCH] WIP: cbfs: Add docbook template   Marek Vasut
• [U-Boot] [PATCH 05/14] fdt: Export fdtdec_find_alias_node() function   Simon Glass
• [U-Boot] [PATCH 09/14] fdt: Add polarity-aware gpio functions to fdtdec   Simon Glass
  • [U-Boot] [PATCH 09/14] fdt: Add polarity-aware gpio functions to fdtdec   Stephen Warren
    • [U-Boot] [PATCH 09/14] fdt: Add polarity-aware gpio functions to fdtdec   Simon Glass
    • [U-Boot] [PATCH 09/14] fdt: Add polarity-aware gpio functions to fdtdec   Stephen Warren
    • [U-Boot] [PATCH 09/14] fdt: Add polarity-aware gpio functions to fdtdec   Simon Glass
    • [U-Boot] [PATCH v2 05/14] fdt: Remove fdtdec_find_alias_node() function   Simon Glass
    • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Tom Rini
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Simon Glass
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Wolfgang Denk
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Simon Glass
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Simon Glass
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Wolfgang Denk
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Simon Glass
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Wolfgang Denk
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Simon Glass
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Wolfgang Denk
      • [U-Boot] [PATCH 6/7] fs: Add a Coreboot Filesystem (CBFS) driver and commands   Simon Glass
    • [U-Boot] [PATCH] am33xx: pmic: Add support for tps65217   Tom Rini
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Marek Vasut
• [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Marek Vasut
  • [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Tom Rini
  • [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Andy Fleming
  • [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Marek Vasut
  • [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Tom Rini
• [U-Boot] [PATCH 0/6] m68k: Fixes for the m68k   Marek Vasut
  • [U-Boot] [PATCH 0/6] m68k: Fixes for the m68k   Jin Zhengxiong-R64188
• [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Marek Vasut
  • [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Huang Changming-R66093
  • [U-Boot] [PATCH v2 1/1] Coldfire: add amcore board support   Jin Zhengxiong-R64188
• [U-Boot] Merging device trees at runtime for module-based systems   David Gibson
  • [U-Boot] Merging device trees at runtime for module-based systems   Daniel Mack
    • [U-Boot] Merging device trees at runtime for module-based systems   David Gibson
      • [U-Boot] Merging device trees at runtime for module-based systems   Daniel Mack
    • [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Andy Fleming
      • [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Huang Changming-R66093
      • [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Jaehoon Chung
      • [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Huang Changming-R66093
      • [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Marek Vasut
      • [U-Boot] [PATCH] powerpc/esdhc: force the bus width to 4bit   Lukasz Majewski
  • [U-Boot] Linker errors from .u_boot_list in powerpc   Andy Fleming
• [U-Boot] Merging device trees at runtime for module-based systems   Stephen Warren
  • [U-Boot] Merging device trees at runtime for module-based systems   Mitch Bradley
  • [U-Boot] Merging device trees at runtime for module-based systems   David Gibson
    • [U-Boot] [RFC] mmc: Properly determine maximum supported bus width   Andy Fleming
    • [U-Boot] [RFC] mmc: Properly determine maximum supported bus width   Jaehoon Chung
    • [U-Boot] [RFC] mmc: Properly determine maximum supported bus width   Stephen Warren
    • [U-Boot] [RFC] mmc: Properly determine maximum supported bus width   Stephen Warren
    • [U-Boot] [RFC] mmc: Properly determine maximum supported bus width   Fleming Andy-AFLEMING
    • [U-Boot] [RFC] mmc: Properly determine maximum supported bus width   Stephen Warren
    • [U-Boot] [RFC] mmc: Properly determine maximum supported bus width   Andy Fleming
• [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
  • [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
    • [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
    • [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
    • [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Simon Glass
    • [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
      • [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
      • [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
      • [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Wolfgang Denk
      • [U-Boot] [PATCH 2/2] WIP: tegra: i2c: Enable new CONFIG_SYS_I2C framework   Stephen Warren
      • [U-Boot] [PATCH] powerpc/corenet_ds: move SATA config to board configuration   Roy Zang
      • [U-Boot] [PATCH] powerpc/corenet_ds: move SATA config to board configuration   Tabi Timur-B04825
• [U-Boot] [PATCH] fs: zfs: fix illegal use of fp   Stefan Roese
  • [U-Boot] [PATCH] at91: move get_chip_id() and get_extension_chip_id() to cpu.c, which can share with all at91 board.   Josh Wu
  • [U-Boot] [PATCH] at91: move get_chip_id() and get_extension_chip_id() to cpu.c, which can share with all at91 board.   Andreas Bießmann
  • [U-Boot] [PATCH] at91: move get_chip_id() and get_extension_chip_id() to cpu.c, which can share with all at91 board.   Andreas Bießmann
  • [U-Boot] [PATCH v2 0/4] ANSI terminal Bootmenu   Pali Rohár
  • [U-Boot] [PATCH v2 1/4] menu: Added support to use user defined functions   Pali Rohár
  • [U-Boot] [PATCH v2 2/4] New command bootmenu: ANSI terminal Boot Menu support   Pali Rohár
  • [U-Boot] [PATCH v2 2/4] New command bootmenu: ANSI terminal Boot Menu support   Wolfgang Denk
  • [U-Boot] [PATCH v2 2/4] New command bootmenu: ANSI terminal Boot Menu support   Pali Rohár
  • [U-Boot] [PATCH v2 3/4] New command clear: Clear the ANSI terminal   Pali Rohár
  • [U-Boot] [PATCH v2 3/4] New command clear: Clear the ANSI terminal   Wolfgang Denk
  • [U-Boot] [PATCH v2 4/4] RX-51: Add support for bootmenu   Pali Rohár
  • [PATCH 1/3] Put both OMAP5 cores into HYP mode   Ian Molton
    • [U-Boot] [PATCH] powerpc/corenet_ds: move SATA config to board configuration   Tabi Timur-B04825
      • [U-Boot] [PATCH] powerpc/corenet_ds: move SATA config to board configuration   Zang Roy-R61911
      • [U-Boot] PCIe on the i.MX6?   Carolyn Smith
      • [U-Boot] PCIe on the i.MX6?   Fabio Estevam
      • [U-Boot] PCIe on the i.MX6?   Carolyn Smith
      • [U-Boot] [PATCH v3 0/18] Add environment call-back and flags capability   Joe Hershberger
      • [U-Boot] [PATCH v3 01/18] Make linux kernel string funcs available to tools   Joe Hershberger
      • [U-Boot] [PATCH v3 02/18] env: Refactor do_apply to a flag   Joe Hershberger
      • [U-Boot] [PATCH v3 03/18] env: Consolidate common code in hsearch_r()   Joe Hershberger
      • [U-Boot] [PATCH v3 04/18] env: Refactor apply into change_ok   Joe Hershberger
      • [U-Boot] [PATCH v3 05/18] env: Use getenv_yesno() more generally   Joe Hershberger
      • [U-Boot] [PATCH v3 06/18] env: Hide '.' variables in env print by default   Joe Hershberger
      • [U-Boot] [PATCH v3 06/18] env: Hide '.' variables in env print by default   Luka Perkov
      • [U-Boot] [PATCH v3 06/18] env: Hide '.' variables in env print by default   Wolfgang Denk
      • [U-Boot] [PATCH v3 07/18] env: Add support for callbacks to environment vars   Joe Hershberger
      • [U-Boot] [PATCH v3 08/18] env: Add a command to view callbacks   Joe Hershberger
      • [U-Boot] [PATCH v3 11/18] env: Add a loadaddr env handler   Joe Hershberger
      • [U-Boot] [PATCH v3 12/18] env: Add a console env handler   Joe Hershberger
      • [U-Boot] [PATCH v3 13/18] env: Add a silent env handler   Joe Hershberger
      • [U-Boot] [PATCH v3 14/18] env: Add environment variable flags   Joe Hershberger
      • [U-Boot] [PATCH v3 15/18] tools/env: Add environment variable flags support   Joe Hershberger
      • [U-Boot] [PATCH v3 16/18] env: Add a command to display details about env flags   Joe Hershberger
      • [U-Boot] [PATCH v3 17/18] env: Add support for access control to .flags   Joe Hershberger
      • [U-Boot] [PATCH v3 0/18] Add environment call-back and flags capability   Wolfgang Denk
      • [U-Boot] [PATCH v3 0/18] Add environment call-back and flags capability   Joe Hershberger
      • [U-Boot] [PATCH v3 09/18] env: Add a bootfile env handler   Joe Hershberger
      • [U-Boot] [PATCH v3 10/18] env: Add a baudrate env handler   Joe Hershberger
      • [U-Boot] [PATCH v3 18/18] env: Handle write-once ethaddr and serial# generically   Joe Hershberger
• [U-Boot] hashtable lib and escaping   Mats Kärrman
  • [U-Boot] hashtable lib and escaping   Wolfgang Denk
    • [U-Boot] hashtable lib and escaping   Mats Kärrman
      • [U-Boot] hashtable lib and escaping   Wolfgang Denk
      • [U-Boot] hashtable lib and escaping   Mats Kärrman
      • [U-Boot] hashtable lib and escaping   Wolfgang Denk
      • [U-Boot] hashtable lib and escaping   Mats Kärrman
      • [U-Boot] [PATCH 1/2] powerpc/85xx: update the work-around for P4080 erratum SERDES-9   Timur Tabi
      • [U-Boot] [PATCH 2/2] powerpc/85xx: implement check for erratum A-004580 work-around   Timur Tabi
      • [U-Boot] [PATCH 1/2] serial: Remove the "serial" console device   Joe Hershberger
      • [U-Boot] [PATCH 1/2] serial: Remove the "serial" console device   Marek Vasut
      • [U-Boot] [PATCH 1/2] serial: Remove the "serial" console device   Joe Hershberger
      • [U-Boot] [PATCH 1/2] serial: Remove the "serial" console device   Marek Vasut
      • [U-Boot] [PATCH 1/2] serial: Remove the "serial" console device   Joe Hershberger
      • [U-Boot] [PATCH 1/2] serial: Remove the "serial" console device   Marek Vasut
      • [U-Boot] [PATCH 2/2] serial: Make nulldev a serial device   Joe Hershberger
      • [U-Boot] [PATCH 2/2] serial: Make nulldev a serial device   Marek Vasut
      • [U-Boot] [PATCH 2/2] serial: Make nulldev a serial device   Joe Hershberger
      • [U-Boot] [PATCH 2/2] serial: Make nulldev a serial device   Marek Vasut
      • [U-Boot] [PATCH 2/2] serial: Make nulldev a serial device   Joe Hershberger
      • [U-Boot] [PATCH 2/2] serial: Make nulldev a serial device   Marek Vasut
      • [U-Boot] [PATCH 2/2] serial: Make nulldev a serial device   Joe Hershberger
      • [U-Boot] [PATCH 2/2] serial: Make nulldev a serial device   Marek Vasut
• [U-Boot] [PATCH v4 6/6] tegra: Enable NAND on Seaboard   Stephen Warren
  • [U-Boot] [PATCH v4 6/6] tegra: Enable NAND on Seaboard   Lucas Stach
    • [U-Boot] [PATCH v4 6/6] tegra: Enable NAND on Seaboard   Simon Glass
      • [U-Boot] [PATCH] ARM: tegra: TrimSlice: add support for USB1 port   Stephen Warren
      • [U-Boot] [PATCH] ARM: tegra: TrimSlice: add support for USB1 port   Lucas Stach
      • [U-Boot] [PATCH] ARM: tegra: TrimSlice: add support for USB1 port   Stephen Warren
      • [U-Boot] [PATCH] ARM: tegra: TrimSlice: add support for USB1 port   Lucas Stach
      • [U-Boot] [PATCH] ARM: tegra: TrimSlice: add support for USB1 port   Stephen Warren
      • [U-Boot] [PATCH] ARM: tegra: TrimSlice: add support for USB1 port   Lucas Stach
      • [U-Boot] [PATCH] ARM: tegra: TrimSlice: add support for USB1 port   Stephen Warren
      • [U-Boot] [PATCH] ARM: tegra: TrimSlice: add support for USB1 port   Simon Glass
      • [U-Boot] [PATCH 1/2] ubi: Only read the actual size of the VID header   Joe Hershberger
      • [U-Boot] [PATCH 2/2] nand: Move the sub-page read support enable to a flag   Joe Hershberger
      • [U-Boot] [PATCH 2/2] nand: Move the sub-page read support enable to a flag   Scott Wood
      • [U-Boot] [PATCH v2 1/2] ubi: Only read the actual size of the VID header   Joe Hershberger
      • [U-Boot] [PATCH v2 1/2] ubi: Only read the actual size of the VID header   Stefan Roese
      • [U-Boot] [PATCH v2 1/2] ubi: Only read the actual size of the VID header   Joe Hershberger
      • [U-Boot] [PATCH] tegra: add CONSOLE_MUX support to tegra-kbc   Allen Martin
      • [U-Boot] [PATCH] tegra: add CONSOLE_MUX support to tegra-kbc   Marek Vasut
      • [U-Boot] [PATCH] tegra: add CONSOLE_MUX support to tegra-kbc   Simon Glass
      • [U-Boot] [PATCH 01/10] arm: Compile cache_disable() with -O2 to avoid failure   Simon Glass
      • [U-Boot] [PATCH 02/10] arm: move flush_dcache_all() to just before disable cache   Simon Glass
      • [U-Boot] [PATCH 03/10] arm: Keep track of the tlb size as well as its location   Simon Glass
      • [U-Boot] [PATCH 04/10] arm: Move fdt check earlier so that board_early_init_f() can use it   Simon Glass
      • [U-Boot] [PATCH 04/10] arm: Move fdt check earlier so that board_early_init_f() can use it   Wolfgang Denk
      • [U-Boot] [PATCH 04/10] arm: Move fdt check earlier so that board_early_init_f() can use it   Simon Glass
      • [U-Boot] [PATCH 05/10] arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading   Simon Glass
      • [U-Boot] [PATCH 05/10] arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading   Wolfgang Denk
      • [U-Boot] [PATCH 05/10] arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading   Simon Glass
      • [U-Boot] [PATCH 06/10] arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCD   Simon Glass
      • [U-Boot] [PATCH 06/10] arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCD   Wolfgang Denk
      • [U-Boot] [PATCH 06/10] arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCD   Simon Glass
      • [U-Boot] [PATCH 07/10] arm: Add option to display customised memory information   Simon Glass
      • [U-Boot] [PATCH 07/10] arm: Add option to display customised memory information   Wolfgang Denk
      • [U-Boot] [PATCH 07/10] arm: Add option to display customised memory information   Simon Glass
      • [U-Boot] [PATCH 08/10] arm: Make interrupts.o and reset.o in libarm also appear in SPL   Simon Glass
      • [U-Boot] [PATCH 09/10] arm: Move bootstage record for board_init_f() to after arch_cpu_init()   Simon Glass
      • [U-Boot] [PATCH 09/10] arm: Move bootstage record for board_init_f() to after arch_cpu_init()   Wolfgang Denk
      • [U-Boot] [PATCH 09/10] arm: Move bootstage record for board_init_f() to after arch_cpu_init()   Simon Glass
      • [U-Boot] [PATCH 09/10] arm: Move bootstage record for board_init_f() to after arch_cpu_init()   Wolfgang Denk
      • [U-Boot] [PATCH 09/10] arm: Move bootstage record for board_init_f() to after arch_cpu_init()   Simon Glass
      • [U-Boot] [PATCH 10/10] arm: Tabify code for MMC initialization   Simon Glass
      • [U-Boot] [PATCH 01/10] arm: Compile cache_disable() with -O2 to avoid failure   Marek Vasut
      • [U-Boot] [PATCH 01/10] arm: Compile cache_disable() with -O2 to avoid failure   Wolfgang Denk
      • [U-Boot] [PATCH 01/10] arm: Compile cache_disable() with -O2 to avoid failure   Simon Glass
      • [U-Boot] [PATCH 01/10] arm: Compile cache_disable() with -O2 to avoid failure   Wolfgang Denk
      • [U-Boot] [PATCH 01/10] arm: Compile cache_disable() with -O2 to avoid failure   Simon Glass
      • [U-Boot] [PATCH v2] Add a simple load option to setexpr   Joe Hershberger
      • [U-Boot] [PATCH] ubifs: Allow ubifsmount volume reference by number   Joe Hershberger
      • [U-Boot] [PATCH] ubifs: Allow ubifsmount volume reference by number   Vikram Narayanan
      • [U-Boot] [PATCH] ubifs: Allow ubifsmount volume reference by number   Joe Hershberger
      • [U-Boot] [PATCH] ubifs: Allow ubifsmount volume reference by number   Vikram Narayanan
      • [U-Boot] [PATCH] ubifs: Allow ubifsmount volume reference by number   Joe Hershberger
      • [U-Boot] [PATCH] ubifs: Allow ubifsmount volume reference by number   Vikram Narayanan
      • [U-Boot] [PATCH] ubifs: Allow ubifsmount volume reference by number   Joe Hershberger
      • [U-Boot] [PATCH] net: Fix endianness bug in link-local   Joe Hershberger
      • [U-Boot] [PATCH] net: Fix endianness bug in link-local   Kim Phillips
      • [U-Boot] [PATCH] net: Fix endianness bug in link-local   Joe Hershberger
      • [U-Boot] [PATCH v2] net: Fix endianness bug in link-local   Joe Hershberger
      • [U-Boot] [PATCH v2] net: Fix endianness bug in link-local   Kim Phillips
  • [U-Boot] SMSC LAN9514 on TI DM37x board   Felix Radensky
    • [U-Boot] SMSC LAN9514 on TI DM37x board   Felix Radensky
    • [U-Boot] SMSC LAN9514 on TI DM37x board   Marek Vasut
    • [U-Boot] SMSC LAN9514 on TI DM37x board   Felix Radensky
    • [U-Boot] SMSC LAN9514 on TI DM37x board   Ilya Yanok
    • [U-Boot] SMSC LAN9514 on TI DM37x board   Felix Radensky
• [U-Boot] ping failed; host 192.168.1.101 is not alive   akdas75
  • [U-Boot] ping failed; host 192.168.1.101 is not alive   akdas75
    • [U-Boot] ping failed; host 192.168.1.101 is not alive   Anatolij Gustschin
    • [U-Boot] ping failed; host 192.168.1.101 is not alive   akdas75
      • [U-Boot] ping failed; host 192.168.1.101 is not alive   akdas75
• [U-Boot] generic mmc bug in reading sd card capacity   victor
  • [U-Boot] generic mmc bug in reading sd card capacity   Romain Izard
• [U-Boot] [PATCH v5 0/5] arm:exynos: Support for display drivers   Minkyu Kang
• [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support   Minkyu Kang
• [U-Boot] [PATCH 0/6 V8] EXYNOS5: Enable SPI support   Minkyu Kang
  • [U-Boot] [PATCH 0/6 V8] EXYNOS5: Enable SPI support   Hatim Rv
• [U-Boot] U-Boot: AM335x Booting with environment in NAND: ECC cause failures...   Ulf Samuelsson
  • [U-Boot] U-Boot: AM335x Booting with environment in NAND: ECC cause failures...   Tom Rini
  • [U-Boot] [PATCH] omap3/mem.c: remove unused defines   Andreas Bießmann
  • [U-Boot] [PATCH 1/4] arm/km: fix memory settings   Holger Brunck
  • [U-Boot] [PATCH 3/4] km/common: cosmetic change reported from checkpatch   Holger Brunck
  • [U-Boot] [PATCH 3/4] km/common: cosmetic change reported from checkpatch   Prafulla Wadaskar
  • [U-Boot] [PATCH 1/4] arm/km: fix memory settings   Prafulla Wadaskar
  • [U-Boot] [PATCH 1/4] arm/km: fix memory settings   Holger Brunck
  • [U-Boot] [PATCH 1/4] arm/km: fix memory settings   Prafulla Wadaskar
  • [U-Boot] [PATCH 2/4] km/common: drop unneeded std* environment variables   Holger Brunck
  • [U-Boot] [PATCH 4/4] arm/km: remove duplicate code   Holger Brunck
  • [U-Boot] [PATCH 4/4] arm/km: remove duplicate code   Prafulla Wadaskar
  • [U-Boot] [PATCH] mmc: at91sam9x5: support to save environment in mmc   Josh Wu
  • [U-Boot] [PATCH] mmc: at91sam9x5: support to save environment in mmc   Andreas Bießmann
• [U-Boot] which toolchain version for Microblaze   Michal Simek
• [U-Boot] [PATCH v2 0/3] EXYNOS: Add support for Exynos4x12   Chander Kashyap
  • [U-Boot] [PATCH v2 0/3] EXYNOS: Add support for Exynos4x12   Marek Vasut
• [U-Boot] USB mass storage gadget patch   victor
  • [U-Boot] USB mass storage gadget patch   Lukasz Majewski
    • [U-Boot] USB mass storage gadget patch   victor
    • [U-Boot] USB mass storage gadget patch   victor
    • [U-Boot] USB mass storage gadget patch   victor
      • [U-Boot] USB mass storage gadget patch   Lukasz Majewski
      • [U-Boot] USB mass storage gadget patch   victor
      • [U-Boot] USB mass storage gadget patch   victor
      • [U-Boot] USB mass storage gadget patch   victor
      • [U-Boot] [PATCH 0/5 V9] EXYNOS5: Enable SPI support   Hatim Ali
      • [U-Boot] [PATCH 1/5 V9] EXYNOS: Add clock for SPI   Hatim Ali
      • [U-Boot] [PATCH 2/5 V9] EXYNOS5: Add base address for SPI   Hatim Ali
      • [U-Boot] [PATCH 3/5 V9] SPI: Add SPI Driver for EXYNOS.   Hatim Ali
      • [U-Boot] [PATCH 4/5 V9] EXYNOS5: Enable SPI   Hatim Ali
      • [U-Boot] [PATCH 5/5 V9] EXYNOS5: Enable SPI booting.   Hatim Ali
      • [U-Boot] [PATCH 0/5 V9] EXYNOS5: Enable SPI support   Minkyu Kang
• [U-Boot] USB mass storage gadget patch   victor
  • [U-Boot] [PATCH] mtd/nand/Makefile: simplify ifdefs   Andreas Bießmann
• [U-Boot] [PATCH] avr32: allow multi block mmc access for all boards   Andreas Bießmann
• [U-Boot] [PATCH v4 0/4] am335x_evm: Enable UART{1,2,3,4,5}   Matthias Fuchs
  • [U-Boot] [PATCH v4 0/4] am335x_evm: Enable UART{1,2,3,4,5}   Andrew Bradford
    • [U-Boot] [PATCH v4 0/4] am335x_evm: Enable UART{1,2,3,4,5}   Tom Rini
• [U-Boot] [PATCH] 4xx: Fix PCI memory mapping on CPCI405 boards   Matthias Fuchs
• [U-Boot] [PATCH v2] am335x: add initial AM335x IDK board support   Matthias Fuchs
  • [U-Boot] [PATCH v2] am335x: add initial AM335x IDK board support   Tom Rini
  • [U-Boot] [PATCH v2] common/lcd: use lcd_setcolreg() to setup CLUT   Andreas Bießmann
  • [U-Boot] [PATCH v3 0/2] rework common/lcd   Andreas Bießmann
  • [U-Boot] [PATCH v3 1/2] video: atmel: implement lcd_setcolreg funtion   Andreas Bießmann
  • [U-Boot] [PATCH v3 1/2] video: atmel: implement lcd_setcolreg funtion   Marek Vasut
  • [U-Boot] [PATCH v3 1/2] video: atmel: implement lcd_setcolreg funtion   Bo Shen
  • [U-Boot] [PATCH v3 1/2] video: atmel: implement lcd_setcolreg funtion   Marek Vasut
  • [U-Boot] [PATCH v3 1/2] video: atmel: implement lcd_setcolreg funtion   Bo Shen
  • [U-Boot] [PATCH v3 1/2] video: atmel: implement lcd_setcolreg funtion   Andreas Bießmann
  • [U-Boot] [PATCH v4] video: atmel: implement lcd_setcolreg funtion   Bo Shen
  • [U-Boot] [PATCH v4] video: atmel: implement lcd_setcolreg funtion   Marek Vasut
  • [U-Boot] [PATCH v4] video: atmel: implement lcd_setcolreg funtion   Bo Shen
  • [U-Boot] [Patch v5] video: atmel: implement lcd_setcolreg function   Bo Shen
  • [U-Boot] [Patch v5] video: atmel: implement lcd_setcolreg function   Anatolij Gustschin
  • [U-Boot] [PATCH v3 2/2] common/lcd: use lcd_setcolreg() to setup CLUT   Andreas Bießmann
  • [U-Boot] [PATCH] patman: Add additional tags to ignore   Simon Glass
  • [U-Boot] [PATCH] patman: Add additional tags to ignore   Tom Rini
  • [U-Boot] [PATCH 1/3] tpm: Add casts for proper compilation   Simon Glass
  • [U-Boot] [PATCH 2/3] tpm: Add Infineon slb9635_i2c TPM driver   Simon Glass
  • [U-Boot] [PATCH 2/3] tpm: Add Infineon slb9635_i2c TPM driver   Wolfgang Denk
  • [U-Boot] [PATCH 2/3] tpm: Add Infineon slb9635_i2c TPM driver   Simon Glass
  • [U-Boot] [PATCH 3/3] exynos: Enable I2C TPM for smdk5250   Simon Glass
  • [U-Boot] [PATCH 1/3] tpm: Add casts for proper compilation   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] tpm: Add casts for proper compilation   Simon Glass
  • [U-Boot] [PATCH 1/3] tpm: Add casts for proper compilation   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] tpm: Add casts for proper compilation   Simon Glass
  • [U-Boot] [PATCH 1/3] tpm: Add casts for proper compilation   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] tpm: Add casts for proper compilation   Simon Glass
  • [U-Boot] [PATCH 1/2] mmc: tegra: support 4-bit operation too on 8-bit slots   Stephen Warren
  • [U-Boot] [PATCH 2/2] ARM: tegra: enable 8-bit SD slots in board files   Stephen Warren
  • [U-Boot] [PATCH v4 0/4] am335x_evm: Enable UART{1,2,3,4,5}   Tom Rini
  • [U-Boot] [PATCH v5 5/5] New board support: Nokia RX-51 aka N900   Tom Rini
  • [U-Boot] Please pull u-boot-ti/master   Tom Rini
    • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
    • [U-Boot] [RFC PATCH 00/50] net: net subsystem ops cleanup   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 01/50] net: Pull out ops from struct eth_device   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 02/50] net: 4xx_enet: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 03/50] net: altera_tse: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 04/50] net: dm9000x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 05/50] net: armada100_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 06/50] net: at91_emac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 07/50] net: ax88180: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 08/50] net: bfin_mac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 09/50] net: calxedaxgmac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 10/50] net: cpsw: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 11/50] net: cs8900: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 12/50] net: davinci_emac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 13/50] net: dc2114x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 14/50] net: designware: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 15/50] net: dnet: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 16/50] net: e1000: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 17/50] net: eepro100: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 18/50] net: enc28j60: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 19/50] net: ep93xx_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 20/50] net: ethoc: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 21/50] net: fec_mxc: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 22/50] net: ftgmac100: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 23/50] net: greth.c: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 24/50] net: fsl_mcdmafec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 25/50] net: inca-ip_sw: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 26/50] net: ks8695eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 27/50] net: lan91c96: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 28/50] net: macb: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 29/50] net: mcffec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 30/50] net: mpc5xxx_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 31/50] net: mvgbe: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 32/50] net: mpc512x_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 33/50] net: natsemi: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 34/50] net: ne2000: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 35/50] net: npe: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 36/50] net: ns8382x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 37/50] net: pcnet: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 38/50] net: plb2800_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 39/50] net: rtl8139: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 40/50] net: rtl8169: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 41/50] net: smc91111: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 42/50] net: smc911x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 43/50] net: tsec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 44/50] net: tsi108_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 45/50] net: uli526x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 46/50] net: xilinx_axi_emac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 47/50] net: xilinx_emaclite: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 48/50] net: zynq_gem: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 49/50] net: xilinx_ll_temac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 50/50] net: sh_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 00/50] net: net subsystem ops cleanup   Marek Vasut
    • [U-Boot] [RFC PATCH 00/50] net: net subsystem ops cleanup   Wolfgang Denk
    • [U-Boot] [RFC PATCH 00/50] net: net subsystem ops cleanup   Tomas Hlavacek
    • [U-Boot] [RFC PATCH 00/50] net: net subsystem ops cleanup   Joe Hershberger
    • [U-Boot] [RFC PATCH 00/50] net: net subsystem ops cleanup   Tomas Hlavacek
    • [U-Boot] [PATCH v2 00/67] net: net subsystem ops cleanup   Tomas Hlavacek
    • [U-Boot] [PATCH v2 01/67] net: dm: Pull out ops from struct eth_device   Tomas Hlavacek
    • [U-Boot] [PATCH v2 02/67] net: 4xx_enet: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 03/67] net: altera_tse: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 04/67] net: dm9000x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 05/67] net: armada100_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 06/67] net: at91_emac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 07/67] net: ax88180: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 08/67] net: bfin_mac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 09/67] net: calxedaxgmac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 10/67] net: cs8900: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 11/67] net: davinci_emac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 12/67] net: dc2114x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 13/67] net: designware: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 14/67] net: dnet: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 15/67] net: e1000: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 16/67] net: eepro100: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 17/67] net: enc28j60: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 18/67] net: ep93xx_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 19/67] net: ethoc: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 20/67] net: fec_mxc: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 21/67] net: ftgmac100: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 22/67] net: greth.c: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 23/67] net: fsl_mcdmafec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 24/67] net: inca-ip_sw: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 25/67] net: ks8695eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 26/67] net: lan91c96: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 27/67] net: macb: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 28/67] net: mcffec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 29/67] net: mpc5xxx_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 30/67] net: mvgbe: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 31/67] net: mpc512x_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 32/67] net: natsemi: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 33/67] net: ne2000: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 34/67] net: npe: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 35/67] net: ns8382x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 36/67] net: pcnet: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 37/67] net: plb2800_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 38/67] net: rtl8139: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 39/67] net: rtl8169: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 40/67] net: smc91111: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 41/67] net: smc911x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 42/67] net: tsec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 43/67] net: tsi108_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 44/67] net: uli526x: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 45/67] net: xilinx_axi_emac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 46/67] net: xilinx_emaclite: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 47/67] net: zynq_gem: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 48/67] net: xilinx_ll_temac: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 49/67] net: sh_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 50/67] net: au1x00_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 51/67] net: mpc8220_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 52/67] net: mpc8260_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 53/67] net: mpc8260_scc: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 54/67] net: mpc85xx_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 55/67] net: mpc8xx_scc: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 56/67] net: db64360/mv_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 57/67] net: mpc8xx_fec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 58/67] net: db64460/mv_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 59/67] net: cpci750/mv_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 60/67] net: evb64260: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 61/67] net: p3mx/mv_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 62/67] net: cpsw: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 63/67] net: fm_eth: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 64/67] net: ftmac100: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 65/67] net: qe: uec: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 66/67] net: usb: asix: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 67/67] net: usb: smsc95xx: Pull out init of struct eth_ops   Tomas Hlavacek
    • [U-Boot] [PATCH v2 00/67] net: net subsystem ops cleanup   Wolfgang Denk
    • [U-Boot] [PATCH v2 00/67] net: net subsystem ops cleanup   Langer Thomas (LQDE RD ST PON SW)
    • [U-Boot] [PATCH v2 00/67] net: net subsystem ops cleanup   Tomas Hlavacek
• [U-Boot] [Drivers PATCH 01/19] mtd/st_smi: Clear error flags while initiating a fresh write   Vipin Kumar
  • [U-Boot] [Drivers PATCH 03/19] mtd/st_smi: Avoid issuing multiple WE commands   Vipin Kumar
  • [U-Boot] [Drivers PATCH 04/19] mtd/st_smi: Write to flash in a tight loop   Vipin Kumar
  • [U-Boot] [Drivers PATCH 06/19] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
  • [U-Boot] [Drivers PATCH 07/19] sdhci: Add sdhci support for spear devices   Vipin Kumar
  • [U-Boot] [Drivers PATCH 08/19] net/designware: Do not select MIIPORT for RGMII interface   Vipin Kumar
  • [U-Boot] [Drivers PATCH 10/19] usb/gadget/designware_otg: Add support for designware otg   Vipin Kumar
  • [U-Boot] [Drivers PATCH 11/19] usb/host/ehci: Add support for EHCI on spear   Vipin Kumar
  • [U-Boot] [Drivers PATCH 12/19] usbtty: adapt buffers for large packet support   Vipin Kumar
  • [U-Boot] [Drivers PATCH 13/19] net/macb: Add arch specific routine to get mdio control   Vipin Kumar
  • [U-Boot] [Drivers PATCH 14/19] net/macb: workaround for transmission hang issue   Vipin Kumar
  • [U-Boot] [Drivers PATCH 15/19] misc/crypto: Add support for C3   Vipin Kumar
  • [U-Boot] [Drivers PATCH 16/19] armv7/ltimer: Add support for local timer on armv7 cpus   Vipin Kumar
  • [U-Boot] [Drivers PATCH 17/19] imls: Add support to list images in NAND device   Vipin Kumar
    • [U-Boot] [Drivers PATCH 17/19] imls: Add support to list images in NAND device   Scott Wood
      • [U-Boot] [Drivers PATCH 17/19] imls: Add support to list images in NAND device   Vipin Kumar
      • [U-Boot] [Drivers PATCH 17/19] imls: Add support to list images in NAND device   Scott Wood
  • [U-Boot] [Drivers PATCH 18/19] u-boot/spl: Add u-boot-spl.img to u-boot targets   Vipin Kumar
  • [U-Boot] [Drivers PATCH 19/19] arm/boards: Define a new config option CONFIG_BOOT_PARAMS_P   Vipin Kumar
• [U-Boot] [SPEAr13xx PATCH 1/7] spear1340: Add support for spear1340 SoC   Vipin Kumar
  • [U-Boot] [SPEAr13xx PATCH 6/7] spear1340evb: Add SPL support   Vipin Kumar
  • [U-Boot] [SPEAr13xx PATCH 7/7] spear1310evb: Add SPL support   Vipin Kumar
• [U-Boot] [SPEAr Enhancement PATCH 1/9] spear: Add cache support   Vipin Kumar
  • [U-Boot] [SPEAr Enhancement PATCH 5/9] spear320: Add support for SD/MMC   Vipin Kumar
  • [U-Boot] [SPEAr Enhancement PATCH 6/9] spear320-hmi: Add support for hmi machine   Vipin Kumar
  • [U-Boot] [SPEAr Enhancement PATCH 7/9] spear6xx/spear3xx: Add support to boot via NAND device   Vipin Kumar
  • [U-Boot] [SPEAr Enhancement PATCH 8/9] spear/spl: Add support to boot from Parallel NOR device   Vipin Kumar
  • [U-Boot] [SPEAr Enhancement PATCH 9/9] spear300evb: Add SPL support   Vipin Kumar
• [U-Boot] [SPEAr Fixes PATCH 01/11] SPEAr: Remove extra spear board configurations   Vipin Kumar
  • [U-Boot] [SPEAr Fixes PATCH 06/11] spear: Read ethaddr from I2C memory   Vipin Kumar
  • [U-Boot] [SPEAr Fixes PATCH 07/11] spear: Cleanup SoC area   Vipin Kumar
  • [U-Boot] [SPEAr Fixes PATCH 08/11] spear/spl: Cleanup spear SPL   Vipin Kumar
  • [U-Boot] [SPEAr Fixes PATCH 09/11] spear: Add POST memory support   Vipin Kumar
  • [U-Boot] [SPEAr Fixes PATCH 10/11] spear: Enable ehci support   Vipin Kumar
  • [U-Boot] [SPEAr Fixes PATCH 11/11] spear3xx: FIX: Enable access to memory for spear310 and spear320   Vipin Kumar
• [U-Boot] [Drivers PATCH 02/19] mtd/st_smi: Add support for Micron N25Q128 Flash   Vipin Kumar
• [U-Boot] [SPEAr13xx PATCH 2/7] spear1310: Add support for spear1310 SoC   Vipin Kumar
• [U-Boot] [SPEAr Enhancement PATCH 2/9] spear3xx: Add pinmux support   Vipin Kumar
• [U-Boot] [SPEAr Fixes PATCH 02/11] spear/configs: Split config files hierarchically into plat, arch, soc and board   Vipin Kumar
• [U-Boot] [SPEAr13xx PATCH 3/7] spear1340evb: Add support for evb machine   Vipin Kumar
• [U-Boot] [SPEAr Enhancement PATCH 3/9] spear320plc: Correct the MACB interface   Vipin Kumar
• [U-Boot] [SPEAr Fixes PATCH 03/11] spear/include: Clean up the spear include files   Vipin Kumar
• [U-Boot] [SPEAr13xx PATCH 4/7] spear1310evb: Add support for evb machine   Vipin Kumar
• [U-Boot] [SPEAr Fixes PATCH 04/11] spear/board: Cleanup spear related board files   Vipin Kumar
• [U-Boot] [SPEAr Enhancement PATCH 4/9] spear/configs: Modify several configurations   Vipin Kumar
• [U-Boot] [Drivers PATCH 05/19] mtd/st_smi: Use page sizes respective to flash   Vipin Kumar
• [U-Boot] [SPEAr13xx PATCH 5/7] spear1340lcad: Add support for LCAD machine   Vipin Kumar
• [U-Boot] [SPEAr Fixes PATCH 05/11] spear: Append MISC_ as prefix to misc register bitmasks   Vipin Kumar
• [U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Allen Martin
  • [U-Boot] [PATCH v2 2/3] tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h   Marek Vasut
• [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Stephen Warren
  • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Simon Glass
    • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Marek Vasut
    • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Stephen Warren
    • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Marek Vasut
    • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Stephen Warren
    • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Marek Vasut
    • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Stephen Warren
    • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Marek Vasut
    • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Simon Glass
    • [U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines   Stephen Warren
• [U-Boot] [PATCH 1/8] tegra: usb: convert USB_PORTS_MAX to be a define   Marek Vasut
• [U-Boot] [PATCH] nand/fsl: add NAND_NO_SUBPAGE_WRITE to eLBC and IFC drivers   Scott Wood
  • [U-Boot] [PATCH 0/17] Various patches in common/   Simon Glass
  • [U-Boot] [PATCH 01/17] arm: Add new bootstage step for the main loop   Simon Glass
  • [U-Boot] [PATCH 01/17] arm: Add new bootstage step for the main loop   Wolfgang Denk
  • [U-Boot] [PATCH 01/17] arm: Add new bootstage step for the main loop   Simon Glass
  • [U-Boot] [PATCH 02/17] Add gettime command   Simon Glass
  • [U-Boot] [PATCH 02/17] Add gettime command   Luka Perkov
  • [U-Boot] [PATCH 02/17] Add gettime command   Simon Glass
  • [U-Boot] [PATCH 02/17] Add gettime command   Wolfgang Denk
  • [U-Boot] [PATCH 02/17] Add gettime command   Simon Glass
  • [U-Boot] [PATCH 03/17] Add a command to read raw blocks from a partition   Simon Glass
  • [U-Boot] [PATCH 04/17] Fix use of conditional LMB   Simon Glass
  • [U-Boot] [PATCH 05/17] stdio: remove useless strncpy   Simon Glass
  • [U-Boot] [PATCH 05/17] stdio: remove useless strncpy   Wolfgang Denk
  • [U-Boot] [PATCH 05/17] stdio: remove useless strncpy   Simon Glass
  • [U-Boot] [PATCH 06/17] env: Add the ability to merge the saved env with the default.   Simon Glass
  • [U-Boot] [PATCH 06/17] env: Add the ability to merge the saved env with the default.   Wolfgang Denk
  • [U-Boot] [PATCH 06/17] env: Add the ability to merge the saved env with the default.   Simon Glass
  • [U-Boot] [PATCH 07/17] Add coreboot version to u-boot's version command   Simon Glass
  • [U-Boot] [PATCH 08/17] Update time command to avoid using get_timer_masked()   Simon Glass
  • [U-Boot] [PATCH 09/17] Add sha256 command for hashing   Simon Glass
  • [U-Boot] [PATCH 09/17] Add sha256 command for hashing   Wolfgang Denk
  • [U-Boot] [PATCH 09/17] Add sha256 command for hashing   Simon Glass
  • [U-Boot] [PATCH 10/17] edid: Library of EDID decode and print   Simon Glass
  • [U-Boot] [PATCH 11/17] edid: Add I2C command for printing the EDID   Simon Glass
  • [U-Boot] [PATCH 12/17] fdt: edid: Enable fdt_add_edid() function when CONFIG_LCD defined   Simon Glass
  • [U-Boot] [PATCH 13/17] mmc: Fix incorrect handling of 'read' & 'write' commands   Simon Glass
  • [U-Boot] [PATCH 14/17] console: Call overwrite_console before searching for console devices   Simon Glass
  • [U-Boot] [PATCH 14/17] console: Call overwrite_console before searching for console devices   Wolfgang Denk
  • [U-Boot] [PATCH 14/17] console: Call overwrite_console before searching for console devices   Simon Glass
  • [U-Boot] [PATCH 14/17] console: Call overwrite_console before searching for console devices   Wolfgang Denk
  • [U-Boot] [PATCH 15/17] Add console command to access io space registers   Simon Glass
  • [U-Boot] [PATCH 15/17] Add console command to access io space registers   Wolfgang Denk
  • [U-Boot] [PATCH 15/17] Add console command to access io space registers   Vadim Bendebury
  • [U-Boot] [PATCH 16/17] console: Enable function to display console info   Simon Glass
  • [U-Boot] [PATCH 16/17] console: Enable function to display console info   Wolfgang Denk
  • [U-Boot] [PATCH 16/17] console: Enable function to display console info   Simon Glass
  • [U-Boot] [PATCH 17/17] tpm: Add TPM stress test   Simon Glass
  • [U-Boot] [PATCH 17/17] tpm: Add TPM stress test   Wolfgang Denk
  • [U-Boot] [PATCH 17/17] tpm: Add TPM stress test   Simon Glass
  • [U-Boot] [PATCH 17/17] tpm: Add TPM stress test   Marek Vasut
  • [U-Boot] [PATCH 17/17] tpm: Add TPM stress test   Simon Glass
  • [U-Boot] [PATCH 17/17] tpm: Add TPM stress test   Marek Vasut
  • [U-Boot] [PATCH 17/17] tpm: Add TPM stress test   Wolfgang Denk
  • [U-Boot] Loading a userland file   Grant
    • [U-Boot] Loading a userland file   Grant
• [U-Boot] [PATCH v3 0/18] Add environment call-back and flags capability   Wolfgang Denk
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
  • [U-Boot] [PATCH V2] ARM: Fix malloc area size for versatile and integrator   Marek Vasut
• [U-Boot] Custodian branch base commits   Albert ARIBAUD
  • [U-Boot] Custodian branch base commits   Stephen Warren
    • [U-Boot] Custodian branch base commits   Albert ARIBAUD
• [U-Boot] [RFC PATCH v3 0/13] Port of MUSB driver from Linux (changes from Linux)   Ilya Yanok
  • [U-Boot] [PATCH v4 0/13] Port of MUSB driver from Linux (changes from Linux)   Ilya Yanok
  • [U-Boot] [PATCH v4 01/13] linux/usb/ch9.h: update with the version from Linux tree   Ilya Yanok
  • [U-Boot] [PATCH v4 02/13] usb: use linux/usb/ch9.h instead of usbdescriptors.h   Ilya Yanok
  • [U-Boot] [PATCH v4 03/13] musb-new: port of Linux musb driver   Ilya Yanok
  • [U-Boot] [PATCH v4 04/13] musb-new: dsps backend driver   Ilya Yanok
  • [U-Boot] [PATCH v4 0/13] Port of MUSB driver from Linux (changes from Linux)   Marek Vasut
  • [U-Boot] [PATCH v4 0/13] Port of MUSB driver from Linux (changes from Linux)   Ilya Yanok
  • [U-Boot] [PATCH v4 01/13] linux/usb/ch9.h: update with the version from Linux tree   Ilya Yanok
  • [U-Boot] [PATCH v4 03/13] musb-new: port of Linux musb driver   Ilya Yanok
  • [U-Boot] [PATCH v4 04/13] musb-new: dsps backend driver   Ilya Yanok
  • [U-Boot] [PATCH v4 05/13] am33xx: init OTG hardware and new musb gadget driver   Ilya Yanok
  • [U-Boot] [PATCH v4 06/13] am335x_evm: enable both musb gadget and host   Ilya Yanok
  • [U-Boot] [PATCH v4 07/13] musb-new: am35x backend driver   Ilya Yanok
  • [U-Boot] [PATCH v4 08/13] OMAP3: am35x_def.h: add USB defines   Ilya Yanok
  • [U-Boot] [PATCH v4 09/13] OMAP3: am35x: add musb functions   Ilya Yanok
  • [U-Boot] [PATCH v4 10/13] am3517_evm: switch to musb-new   Ilya Yanok
  • [U-Boot] [PATCH v4 11/13] musb-new: omap2plus backend driver   Ilya Yanok
  • [U-Boot] [PATCH v4 12/13] omap3_beagle: add musb-new init   Ilya Yanok
  • [U-Boot] [PATCH v4 13/13] omap3_beagle: use new MUSB intstead of the old one   Ilya Yanok
  • [U-Boot] [PATCH v4 0/13] Port of MUSB driver from Linux (changes from Linux)   Marek Vasut
  • [U-Boot] [PATCH v4 02/13] usb: use linux/usb/ch9.h instead of usbdescriptors.h   Ilya Yanok
  • [U-Boot] [PATCH v1 7/8] am33xx_spl_bch: simple SPL nand loader for AM33XX   Ilya Yanok
    • [U-Boot] [PATCH v1 7/8] am33xx_spl_bch: simple SPL nand loader for AM33XX   Tom Rini
    • [U-Boot] [PATCH] TPM: remove dead code   Wolfgang Denk
    • [U-Boot] [PATCH] TPM: remove dead code   Simon Glass
    • [U-Boot] [PATCH] TPM: remove dead code   Wolfgang Denk
    • [U-Boot] [PATCH] TPM: remove dead code   Simon Glass
    • [U-Boot] [PATCH] TPM: remove dead code   Wolfgang Denk
    • [U-Boot] [PATCH] TPM: remove dead code   Simon Glass
    • [U-Boot] [PATCH] TPM: remove dead code   Wolfgang Denk
    • [U-Boot] [PATCH] TPM: remove dead code   Simon Glass
    • [U-Boot] [PATCH] TPM: remove dead code   Wolfgang Denk
    • [U-Boot] [PATCH] TPM: remove dead code   Simon Glass
    • [U-Boot] Signing Images - was: TPM: remove dead code   Wolfgang Denk
    • [U-Boot] Signing Images - was: TPM: remove dead code   Simon Glass
    • [U-Boot] [PATCH] TPM: remove dead code   Wolfgang Denk
    • [U-Boot] [PATCH] TPM: remove dead code   Simon Glass
    • [U-Boot] [PATCH] TPM: remove dead code   Simon Glass
    • [U-Boot] [PATCH] TPM: remove dead code   Tom Rini
    • [U-Boot] [PATCH] TPM: remove dead code   Simon Glass
  • [U-Boot] [PATCH 07/15] x86: Add functions to access MSRs   Simon Glass
    • [U-Boot] [PATCH 0/20] Final patch set for basic coreboot x86 implementation   Simon Glass
    • [U-Boot] [PATCH 01/20] x86: Initialise SPI if enabled   Simon Glass
    • [U-Boot] [PATCH 02/20] x86: Reorder x86's post relocation memory layout   Simon Glass
    • [U-Boot] [PATCH 03/20] x86: Make the upper bound on relocated symbols closed instead of open   Simon Glass
    • [U-Boot] [PATCH 04/20] x86: Make calculate_relocation_address an overridable function   Simon Glass
    • [U-Boot] [PATCH 05/20] x86: Override calculate_relocation_address to use the e820 map   Simon Glass
    • [U-Boot] [PATCH 06/20] x86: Add back cold- and warm-boot flags   Simon Glass
    • [U-Boot] [PATCH 07/20] x86: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading   Simon Glass
    • [U-Boot] [PATCH 08/20] x86: Add support for CONFIG_OF_CONTROL   Simon Glass
    • [U-Boot] [PATCH 09/20] x86: coreboot: Set CONFIG_ARCH_DEVICE_TREE correctly   Simon Glass
    • [U-Boot] [PATCH 10/20] x86: fdt: Create basic .dtsi file for coreboot   Simon Glass
    • [U-Boot] [PATCH 11/20] x86: Emit port 80 post codes in show_boot_progress()   Simon Glass
    • [U-Boot] [PATCH 12/20] x86: Fix MTRR clear to detect which MTRR to use   Simon Glass
    • [U-Boot] [PATCH 13/20] x86: Issue SMI to finalize Coreboot in final stage   Simon Glass
    • [U-Boot] [PATCH 14/20] x86: Provide tick counter and frequency reference for Intel core architecture   Simon Glass
    • [U-Boot] [PATCH 15/20] x86: Provide a way to throttle port80 accesses   Simon Glass
    • [U-Boot] [PATCH 16/20] x86: Remove coreboot_ from file name   Simon Glass
    • [U-Boot] [PATCH 17/20] x86: drop unused code in coreboot.c   Simon Glass
    • [U-Boot] [PATCH 18/20] video: Check for valid FB pointer before clearing   Simon Glass
    • [U-Boot] [PATCH 19/20] x86: Remove video_init() prototype from u-boot-x86.h   Simon Glass
    • [U-Boot] [PATCH 20/20] x86: coreboot: Enable video display   Simon Glass
    • [U-Boot] [PATCH 1/3] lzma: update to lzma sdk 9.20   Simon Glass
    • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Simon Glass
    • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Wolfgang Denk
    • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Wolfgang Denk
    • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Pavel Machek
    • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Wolfgang Denk
    • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Han Shen(沈涵)
    • [U-Boot] [PATCH 3/3] Add stricmp() and strnicmp()   Simon Glass
    • [U-Boot] [PATCH 3/3] Add stricmp() and strnicmp()   Wolfgang Denk
    • [U-Boot] [PATCH 3/3] Add stricmp() and strnicmp()   Simon Glass
    • [U-Boot] [PATCH 3/3] Add stricmp() and strnicmp()   Albert ARIBAUD
    • [U-Boot] [PATCH 3/3] Add stricmp() and strnicmp()   Simon Glass
    • [U-Boot] [PATCH 3/3] Add stricmp() and strnicmp()   Simon Glass
    • [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Tom Rini
      • [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Joe Hershberger
      • [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Tom Rini
    • [U-Boot] [PATCH v4 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Tom Rini
      • [U-Boot] [PATCH v4 00/24] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
• [U-Boot] [PATCH] mmc: add no simultaenous power and vdd   RgC
  • [U-Boot] [PATCH] mmc: add no simultaenous power and vdd   Wolfgang Denk
    • [U-Boot] [PATCH] mmc: add no simultaenous power and vdd   RgC
  • [U-Boot] [PATCH v2] mmc: add no simultaenous power and vdd   RgC
    • [U-Boot] [PATCH v1 0/1] Factorize ARM startup code as mush as possible.   Albert ARIBAUD
    • [U-Boot] [PATCH v1] arm: move generic startup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v1] arm: move generic startup code in crt0.S   Wolfgang Denk
    • [U-Boot] [PATCH v1] arm: move generic startup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.   Albert ARIBAUD
    • [U-Boot] [PATCH v2 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v2 2/2] arm: remove useless code in start.S files   Albert ARIBAUD
    • [U-Boot] [PATCH v2 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v2 1/2] arm: move C runtime setup code in crt0.S   Vikram Narayanan
    • [U-Boot] [PATCH v2 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v2 1/2] arm: move C runtime setup code in crt0.S   Andreas Bießmann
    • [U-Boot] [PATCH v2 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v2 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.   Albert ARIBAUD
    • [U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.   Tom Rini
    • [U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.   Sughosh Ganu
    • [U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.   Sughosh Ganu
    • [U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.   Albert ARIBAUD
    • [U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.   Sughosh Ganu
    • [U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.   Albert ARIBAUD
    • [U-Boot] [PATCH v3 0/2] Factorize ARM startup code as mush as possible.   Albert ARIBAUD
    • [U-Boot] [PATCH v3 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v3 2/2] arm: remove useless code in start.S files   Albert ARIBAUD
    • [U-Boot] [PATCH v3 1/2] arm: move C runtime setup code in crt0.S   Simon Glass
    • [U-Boot] [PATCH v3 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v3 0/2] Factorize ARM startup code as mush as possible.   Albert ARIBAUD
    • [U-Boot] [PATCH v4 0/2] Factorize ARM startup code as mush as possible.   Albert ARIBAUD
    • [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v4 2/2] arm: remove useless code in start.S files   Albert ARIBAUD
    • [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S   Simon Glass
    • [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
    • [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S   Simon Glass
  • [U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link.   Sambul
    • [U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link.   Prafulla Wadaskar
    • [U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link.   Sam Bulka
    • [U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link.   Luka Perkov
    • [U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link.   Daniel Stodden
• [U-Boot] [PATCH] mx53loco: Add support for SEIKO 4.3'' WVGA panel   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/4] ARM: bcm2835: add mailbox driver   Albert ARIBAUD
• [U-Boot] [PATCH] arm: atmel: cpux9k2: add missing cache configs   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] socfpga/spl: Remove timer_init from spl_board_init   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2] mmc: add bcm2835 driver   Stephen Warren
• [U-Boot] [PATCH V2 3/4] lcd: calculate line_length after lcd_ctrl_init()   Anatolij Gustschin
  • [U-Boot] [PATCH v3] fs/fs.c: do_fsload: measure throughput   Tom Rini
• [U-Boot] [PATCH V2 4/4] video: add a driver for the bcm2835   Anatolij Gustschin
  • [U-Boot] [PATCH V2 4/4] video: add a driver for the bcm2835   Stephen Warren
    • [U-Boot] [PATCH V2 4/4] video: add a driver for the bcm2835   Anatolij Gustschin
    • [U-Boot] [PATCH] fs: handle CONFIG_NEEDS_MANUAL_RELOC   Tom Rini
    • [U-Boot] [PATCH] cmd_fdt.c: Use %p when printing pointers   Tom Rini
    • [U-Boot] [PATCH] lib/vsprintf.c: don't special-case pointers to address null   Tom Rini
    • [U-Boot] [PATCH] git-mailrc: Change x86 maintainer to Simon   Tom Rini
    • [U-Boot] [PATCH 0/2] Standardize on run-time board ID variables   Tom Rini
    • [U-Boot] [PATCH] Add board_name to CONFIG_ENV_VARS_UBOOT_CONFIG   Tom Rini
    • [U-Boot] [PATCH 1/2] ZFS: Fix compile warning in cmd_zfs.c (GCC 4.6.4 from ELDK 5.2.1)   Tom Rini
    • [U-Boot] [PATCH v3 0/22] AHCI / SATA Improvements   Tom Rini
    • [U-Boot] [PATCH 1/3] fs: fix do_fsload() handling of optional arguments   Tom Rini
    • [U-Boot] [PATCH] fs: rename fsload command to load   Tom Rini
    • [U-Boot] [PATCH v2 00/32] Initial sparse fix series   Tom Rini
    • [U-Boot] v2013.01-rc1 released   Tom Rini
      • [U-Boot] v2013.01-rc1 released   Wolfgang Denk
      • [U-Boot] v2013.01-rc1 released   Tom Rini
      • [U-Boot] v2013.01-rc1 released   Michael Walle
      • [U-Boot] v2013.01-rc1 released   Prafulla Wadaskar
  • [PATCH] Makefile: use EXTRAVERSION for -rc? tag   Wolfgang Denk
• [U-Boot] [PATCH v3 1/2] m68k: add support for mcf5307 cpu   angelo
  • [U-Boot] [PATCH v3 1/2] m68k: add support for mcf5307 cpu   Wolfgang Denk
    • [U-Boot] [PATCH v3 1/2] m68k: add support for mcf5307 cpu   Angelo Dureghello
    • [U-Boot] [PATCH v3 1/2] m68k: add support for mcf5307 cpu   Angelo Dureghello
      • [U-Boot] [PATCH v3 1/2] m68k: add support for mcf5307 cpu   Wolfgang Denk
• [U-Boot] [PATCH v3 2/2] amcore: add support for amcore board   angelo
  • [U-Boot] [PATCH v3 2/2] amcore: add support for amcore board   Wolfgang Denk
    • [U-Boot] [PATCH v3 2/2] amcore: add support for amcore board   Angelo Dureghello
      • [U-Boot] [PATCH v3 2/2] amcore: add support for amcore board   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
  • [U-Boot] Pull request: u-boot-arm/master   Stephen Warren
  • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
  • [U-Boot] [PATCH v4 1/4] mvgbe: allow non-sequential PHY addresses   Albert ARIBAUD
  • [U-Boot] [PATCH v4 2/4] mv88e61xx: refactor PHY and SWITCH level-code   Albert ARIBAUD
  • [U-Boot] [PATCH v4 3/4] kirkwood: make MPP arrays static const   Albert ARIBAUD
  • [U-Boot] [PATCH v4 4/4] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
  • [U-Boot] [PATCH v4 4/4] ARM: lacie_kw: add support for WIRELESS_SPACE   Prafulla Wadaskar
  • [U-Boot] [PATCH v4 4/4] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
  • [U-Boot] [PATCH v4 4/4] ARM: lacie_kw: add support for WIRELESS_SPACE   Prafulla Wadaskar
  • [U-Boot] [PATCH v4 3/4] kirkwood: make MPP arrays static const   Prafulla Wadaskar
  • [U-Boot] [PATCH v4 2/4] mv88e61xx: refactor PHY and SWITCH level-code   Prafulla Wadaskar
  • [U-Boot] [PATCH v4 1/4] mvgbe: allow non-sequential PHY addresses   Prafulla Wadaskar
  • [U-Boot] [PATCH v5 0/3] Add support for the LaCie Wireless Space   Albert ARIBAUD
  • [U-Boot] [PATCH v5 1/3] mv88e61xx: refactor PHY and SWITCH level-code   Albert ARIBAUD
  • [U-Boot] [PATCH v5 2/3] kirkwood: make MPP arrays static const   Albert ARIBAUD
  • [U-Boot] [PATCH v5 3/3] ARM: lacie_kw: add support for WIRELESS_SPACE   Albert ARIBAUD
• [U-Boot] [PATCH] sh: fix trigger_address_error()   Shimoda, Yoshihiro
  • [U-Boot] [PATCH] sh: fix trigger_address_error()   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: add support for sh7752evb board   Shimoda, Yoshihiro
  • [U-Boot] [PATCH] sh: add support for sh7752evb board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] serial_sh: Add support Renesas SH7752   Shimoda, Yoshihiro
  • [U-Boot] [PATCH] serial_sh: Add support Renesas SH7752   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh_eth: add support for SH7752   Shimoda, Yoshihiro
  • [U-Boot] [PATCH] net: sh_eth: add support for SH7752   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v7 09/16] arm: Add control over cachability of memory regions   Dennis Lan (dlan)
  • [U-Boot] [PATCH v7 09/16] arm: Add control over cachability of memory regions   Simon Glass
    • [U-Boot] [PATCH] nios2: use builtin functions for control registers access   Thomas Chou
    • [U-Boot] [PATCH] nios2: remove asm/status_led.h   Thomas Chou
    • [U-Boot] [PULL] please pull u-boot-avr32/master   Andreas Bießmann
    • [U-Boot] [PULL] please pull u-boot-avr32/master   Tom Rini
• [U-Boot] [PATCH] video: atmel: implement lcd_setcolreg funtion   Andreas Bießmann
  • [U-Boot] [PATCH] video: atmel: implement lcd_setcolreg funtion   Andreas Bießmann
  • [PATCH] mmc: Correct computing the SD capacity   Romain Izard
    • [U-Boot] [PATCH 0/4] Add DT based ethernet driver for SMDK5250   Hatim Ali
    • [U-Boot] [PATCH 1/4] EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250   Hatim Ali
    • [U-Boot] [PATCH 1/4] EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250   Simon Glass
    • [U-Boot] [PATCH 2/4] fdt: exynos5: Add DT node definition for SROM and SMSC9215   Hatim Ali
    • [U-Boot] [PATCH 2/4] fdt: exynos5: Add DT node definition for SROM and SMSC9215   Simon Glass
    • [U-Boot] [PATCH 3/4] exynos5: Add DT based driver for SMSC92xx ethernet   Hatim Ali
    • [U-Boot] [PATCH 3/4] exynos5: Add DT based driver for SMSC92xx ethernet   Simon Glass
    • [U-Boot] [PATCH 3/4] exynos5: Add DT based driver for SMSC92xx ethernet   Hatim Rv
    • [U-Boot] [PATCH 3/4] exynos5: Add DT based driver for SMSC92xx ethernet   Simon Glass
    • [U-Boot] [PATCH 4/4] exynos5: fdt: Enable FDT for exynos5 based SMDK5250 board   Hatim Ali
    • [U-Boot] [PATCH 4/4] exynos5: fdt: Enable FDT for exynos5 based SMDK5250 board   Simon Glass
    • [U-Boot] [PULL] please pull u-boot-atmel/master   Andreas Bießmann
    • [U-Boot] [PULL] please pull u-boot-atmel/master   Albert ARIBAUD
    • [U-Boot] [PULL] please pull u-boot-atmel/master   Andreas Bießmann
• [U-Boot] [PATCH 2/3] mmc: sdhci: add the DMA select for SDMA   Rommel G Custodio
  • [U-Boot] [PATCH 2/3] mmc: sdhci: add the DMA select for SDMA   Jaehoon Chung
    • [U-Boot] [PATCH 2/3] mmc: sdhci: add the DMA select for SDMA   Rommel Custodio
    • [U-Boot] [PATCH v2 2/2] nand: Move the sub-page read support enable to a flag   Joe Hershberger
    • [U-Boot] [U-Boot, v2, 2/2] nand: Move the sub-page read support enable to a flag   Scott Wood
    • [U-Boot] [PATCH v5 00/26] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
    • [U-Boot] [PATCH v5 01/26] pmic:i2c: Handle PMIC I2C transmission comprising of two bytes   Lukasz Majewski
    • [U-Boot] [PATCH v5 02/26] pmic:i2c: Add I2C sensor byte order (big/little) to PMIC framework   Lukasz Majewski
    • [U-Boot] [PATCH v5 03/26] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C   Lukasz Majewski
    • [U-Boot] [PATCH v5 04/26] pmic: Extend PMIC framework to support multiple instances of PMIC devices   Lukasz Majewski
    • [U-Boot] [PATCH v5 05/26] pmic: Introduce power_init_board() method at ./lib/board.c file   Lukasz Majewski
    • [U-Boot] [PATCH v5 06/26] pmic: Enable power_board_init() support at TRATS   Lukasz Majewski
    • [U-Boot] [PATCH v5 06/26] pmic: Enable power_board_init() support at TRATS   Minkyu Kang
    • [U-Boot] [PATCH v5 07/26] pmic:chrg: Common information about charger and battery (power_chrg.h)   Lukasz Majewski
    • [U-Boot] [PATCH v5 08/26] pmic: Move pmic related code to ./drivers/power directory   Lukasz Majewski
    • [U-Boot] [PATCH v5 09/26] pmic: Extend struct pmic to support battery and charger related operations   Lukasz Majewski
    • [U-Boot] [PATCH v5 10/26] pmic:battery: Support for Trats Battery at PMIC framework   Lukasz Majewski
    • [U-Boot] [PATCH v5 11/26] pmic:muic: Support for MUIC built into MAX8997 device   Lukasz Majewski
    • [U-Boot] [PATCH v5 12/26] pmic:fuel-gauge: Support for MAX17042 fuel-gauge   Lukasz Majewski
    • [U-Boot] [PATCH v5 13/26] pmic:max8997: Function for calculating LDO internal register value   Lukasz Majewski
    • [U-Boot] [PATCH v5 14/26] arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board   Lukasz Majewski
    • [U-Boot] [PATCH v5 14/26] arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board   Minkyu Kang
    • [U-Boot] [PATCH v5 15/26] arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board   Lukasz Majewski
    • [U-Boot] [PATCH v5 15/26] arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board   Minkyu Kang
    • [U-Boot] [PATCH v5 16/26] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board   Lukasz Majewski
    • [U-Boot] [PATCH v5 16/26] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board   Minkyu Kang
    • [U-Boot] [PATCH v5 17/26] arm:trats:pmic: Enable battery support at Samsung's TRATS board   Lukasz Majewski
    • [U-Boot] [PATCH v5 17/26] arm:trats:pmic: Enable battery support at Samsung's TRATS board   Minkyu Kang
    • [U-Boot] [PATCH v5 18/26] pmic:max8997: Support for MAX8997 internal charger control   Lukasz Majewski
    • [U-Boot] [PATCH v5 19/26] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board   Lukasz Majewski
    • [U-Boot] [PATCH v5 19/26] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board   Minkyu Kang
    • [U-Boot] [PATCH v5 19/26] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board   Lukasz Majewski
    • [U-Boot] [PATCH v5 20/26] arm:trats:pmic: Support for charging battery at Samsung's TRATS board   Lukasz Majewski
    • [U-Boot] [PATCH v5 20/26] arm:trats:pmic: Support for charging battery at Samsung's TRATS board   Minkyu Kang
    • [U-Boot] [PATCH v5 20/26] arm:trats:pmic: Support for charging battery at Samsung's TRATS board   Lukasz Majewski
    • [U-Boot] [PATCH v5 21/26] pmic: Extend PMIC framework to support battery related commands   Lukasz Majewski
    • [U-Boot] [PATCH v5 22/26] power:pmic: Rename ./drivers/power/pmic_* to ./drivers/power/power_* files   Lukasz Majewski
    • [U-Boot] [PATCH v5 23/26] power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER   Lukasz Majewski
    • [U-Boot] [PATCH v5 24/26] power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWER   Lukasz Majewski
    • [U-Boot] [PATCH v5 25/26] arm:goni:pmic: Adjust GONI target platform board to new PMIC framework   Lukasz Majewski
    • [U-Boot] [PATCH v5 25/26] arm:goni:pmic: Adjust GONI target platform board to new PMIC framework   Minkyu Kang
    • [U-Boot] [PATCH v5 26/26] arm:universal_c210:pmic: Adjust C210 Universal target platform board to new PMIC framework   Lukasz Majewski
    • [U-Boot] [PATCH v5 26/26] arm:universal_c210:pmic: Adjust C210 Universal target platform board to new PMIC framework   Minkyu Kang
• [U-Boot] [PATCH v3 2/2] amcore: add support for amcore board   Wolfgang Denk
  • [U-Boot] [PATCH v3 2/2] amcore: add support for amcore board   Angelo Dureghello
• [U-Boot] [PATCH 5/5] mpc iim: Switch to common fsl_iim   Benoît Thébaudeau
• [U-Boot] [PATCH v2] mx5: Mark lowlevel_init board-specific code   Benoît Thébaudeau
  • [U-Boot] [PATCH v2] mx5: Mark lowlevel_init board-specific code   Stefano Babic
    • [U-Boot] [PATCH v2] mx5: Mark lowlevel_init board-specific code   Benoît Thébaudeau
      • [U-Boot] [PATCH v2] mx5: Mark lowlevel_init board-specific code   Stefano Babic
  • [U-Boot] [PATCH v2] mx5: Mark lowlevel_init board-specific code   Stefano Babic
• [U-Boot] [PATCH 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Benoît Thébaudeau
  • [U-Boot] [PATCH 02/13] ehci-mxc: Clean up   Benoît Thébaudeau
  • [U-Boot] [PATCH 03/13] ehci-mx5: Clean up   Benoît Thébaudeau
  • [U-Boot] [PATCH 04/13] ehci-mx5: Fix OC_DIS usage   Benoît Thébaudeau
  • [U-Boot] [PATCH 05/13] ehci-mx5: Fix OPM usage   Benoît Thébaudeau
  • [U-Boot] [PATCH 06/13] ehci-mx5: Fix *PM usage for i.MX53   Benoît Thébaudeau
  • [U-Boot] [PATCH 07/13] ehci-mx5: Add missing OC_DIS for i.MX53   Benoît Thébaudeau
  • [U-Boot] [PATCH 08/13] ehci-mxc: Make EHCI power/oc polarities configurable   Benoît Thébaudeau
  • [U-Boot] [PATCH 09/13] ehci-mxc: Make i.MX25 EHCI configurable   Benoît Thébaudeau
  • [U-Boot] [PATCH 10/13] ehci-mxc: Define host offsets   Benoît Thébaudeau
  • [U-Boot] [PATCH 11/13] ehci-mxc: Add support for i.MX35   Benoît Thébaudeau
  • [U-Boot] [PATCH 12/13] mx35pdk: Add support for OTG   Benoît Thébaudeau
    • [U-Boot] [PATCH 12/13] mx35pdk: Add support for OTG   Stefano Babic
    • [U-Boot] [PATCH 12/13] mx35pdk: Add support for OTG   Stefano Babic
      • [U-Boot] [PATCH 12/13] mx35pdk: Add support for OTG   Benoît Thébaudeau
      • [U-Boot] [PATCH 12/13] mx35pdk: Add support for OTG   Stefano Babic
  • [U-Boot] [PATCH 13/13] ehci-mx5: Make board_ehci_hcd_init() optional   Benoît Thébaudeau
    • [U-Boot] [PATCH 13/13] ehci-mx5: Make board_ehci_hcd_init() optional   Marek Vasut
      • [U-Boot] [PATCH 13/13] ehci-mx5: Make board_ehci_hcd_init() optional   Benoît Thébaudeau
  • [U-Boot] [PATCH 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Marek Vasut
    • [U-Boot] [PATCH 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Stefano Babic
  • [U-Boot] [PATCH v2 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 02/13] ehci-mxc: Clean up   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 03/13] ehci-mx5: Clean up   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 04/13] ehci-mx5: Fix OC_DIS usage   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 05/13] ehci-mx5: Fix OPM usage   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 06/13] ehci-mx5: Fix *PM usage for i.MX53   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 07/13] ehci-mx5: Add missing OC_DIS for i.MX53   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 08/13] ehci-mxc: Make EHCI power/oc polarities configurable   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 09/13] ehci-mxc: Make i.MX25 EHCI configurable   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 10/13] ehci-mxc: Define host offsets   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 11/13] ehci-mxc: Add support for i.MX35   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 12/13] mx35pdk: Add support for OTG   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 13/13] ehci-mx5/6: Make board_ehci_hcd_init() optional   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Stefano Babic
      • [U-Boot] [PATCH v2 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Albert ARIBAUD
      • [U-Boot] [PATCH v2 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Albert ARIBAUD
      • [U-Boot] [PATCH v2 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 01/13] mx31: Move EHCI definitions to ehci-fsl.h   stefano babic
    • [U-Boot] [PATCH v3 01/13] mx31: Move EHCI definitions to ehci-fsl.h   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 02/13] ehci-mxc: Clean up   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 02/13] ehci-mxc: Clean up   Stefano Babic
      • [U-Boot] [PATCH v3 03/13] ehci-mx5: Clean up   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 04/13] ehci-mx5: Fix OC_DIS usage   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 05/13] ehci-mx5: Fix OPM usage   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 06/13] ehci-mx5: Fix *PM usage for i.MX53   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 07/13] ehci-mx5: Add missing OC_DIS for i.MX53   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 08/13] ehci-mxc: Make EHCI power/oc polarities configurable   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 09/13] ehci-mxc: Make i.MX25 EHCI configurable   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 10/13] ehci-mxc: Define host offsets   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 11/13] ehci-mxc: Add support for i.MX35   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 12/13] mx35pdk: Add support for OTG   Benoît Thébaudeau
      • [U-Boot] [PATCH v3 13/13] ehci-mx5/6: Make board_ehci_hcd_init() optional   Benoît Thébaudeau
• [U-Boot] [PATCH 1/3] nand: Clean up nand_util   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/3] nand: Fix nand_erase_opts() offset check   Benoît Thébaudeau
    • [U-Boot] [U-Boot,2/3] nand: Fix nand_erase_opts() offset check   Scott Wood
      • [U-Boot] [U-Boot,2/3] nand: Fix nand_erase_opts() offset check   Benoît Thébaudeau
      • [U-Boot] [U-Boot,2/3] nand: Fix nand_erase_opts() offset check   Scott Wood
  • [U-Boot] [PATCH 3/3] nand: Add torture feature   Benoît Thébaudeau
    • [U-Boot] [PATCH 3/3] nand: Add torture feature   Scott Wood
    • [U-Boot] [PATCH v2] nand: Add torture feature   Benoît Thébaudeau
      • [U-Boot] [PATCH v2] nand: Add torture feature   Scott Wood
  • [U-Boot] [U-Boot,1/3] nand: Clean up nand_util   Scott Wood
    • [U-Boot] [U-Boot,1/3] nand: Clean up nand_util   Scott Wood
      • [U-Boot] [U-Boot,1/3] nand: Clean up nand_util   Andreas Bießmann
      • [U-Boot] [U-Boot,1/3] nand: Clean up nand_util   Tom Rini
• [U-Boot] [PATCH 1/2] tegra: i2c: Add function to know about current bus   Simon Glass
  • [U-Boot] [PATCH 1/2] tegra: i2c: Add function to know about current bus   Heiko Schocher
  • [U-Boot] [PATCH] pxa: Disable dcache on palmld, palmtc, zipitz2   Simon Glass
    • [U-Boot] [PATCH] pxa: Disable dcache on palmld, palmtc, zipitz2   Marek Vasut
• [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Benoît Thébaudeau
  • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Marek Vasut
    • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Benoît Thébaudeau
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Marek Vasut
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Lucas Stach
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Benoît Thébaudeau
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Marek Vasut
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Marek Vasut
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Lucas Stach
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Marek Vasut
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Lucas Stach
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Marek Vasut
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Benoît Thébaudeau
      • [U-Boot] usb: ehci: Take advantage of the new multi-controller feature for MXC   Marek Vasut
• [U-Boot] [PATCH v2 10/25] common/misc: sparse fixes   Henrik Nordström
  • [U-Boot] [PATCH] common: fix help command breakage   Kim Phillips
    • [U-Boot] [PATCH] common: fix help command breakage   Henrik Nordström
      • [U-Boot] [PATCH] common: fix help command breakage   Simon Glass
    • [U-Boot] [PATCH] common: fix help command breakage   Anatolij Gustschin
      • [U-Boot] [PATCH] common: fix help command breakage   Anatolij Gustschin
      • [U-Boot] [PATCH] common: fix help command breakage   Wolfgang Denk
    • [U-Boot] [PATCH] common: fix help command breakage   Wolfgang Denk
      • [U-Boot] [PATCH] common/command.c: revert chanches from commit 199adb60   Anatolij Gustschin
      • [U-Boot] [PATCH] common/command.c: revert chanches from commit 199adb60   Anatolij Gustschin
      • [U-Boot] [PATCH] common/command.c: revert chanches from commit 199adb60   Albert ARIBAUD
      • [U-Boot] [PATCH] common/command.c: revert chanches from commit 199adb60   Anatolij Gustschin
      • [U-Boot] [PATCH v2 1/2] cbfs: Remove mention of CREDITS files   Simon Glass
      • [U-Boot] [PATCH v2 2/2] cbfs: Add docbook template   Simon Glass
• [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Pavel Machek
  • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Marek Vasut
    • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Pavel Machek
      • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Marek Vasut
      • [U-Boot] [PATCH 2/3] md5: Fix gcc-4.7 build problem in md5   Simon Glass
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Stephen Warren
      • [U-Boot] [PATCH 2/3] common: rework bouncebuf implementation   Stephen Warren
      • [U-Boot] [PATCH 2/3] common: rework bouncebuf implementation   Simon Glass
      • [U-Boot] [PATCH 2/3] common: rework bouncebuf implementation   Stephen Warren
      • [U-Boot] [PATCH 2/3] common: rework bouncebuf implementation   Stephen Warren
      • [U-Boot] [PATCH 3/3] mmc: tegra: use bounce buffer APIs   Stephen Warren
      • [U-Boot] [PATCH 3/3] mmc: tegra: use bounce buffer APIs   Simon Glass
      • [U-Boot] [PATCH 3/3] mmc: tegra: use bounce buffer APIs   Stephen Warren
      • [U-Boot] [PATCH 3/3] mmc: tegra: use bounce buffer APIs   Simon Glass
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Simon Glass
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Stephen Warren
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Marek Vasut
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Stephen Warren
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Marek Vasut
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Stephen Warren
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Marek Vasut
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Stephen Warren
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Marek Vasut
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Stephen Warren
      • [U-Boot] [PATCH 1/3] common: add ifdefs around bouncebuf.c body   Marek Vasut
      • [U-Boot] [PATCH 1/2] tegra: Remove unnecessary CONFIG_SYS_NAND_BASE   Simon Glass
      • [U-Boot] [PATCH 2/2] tegra: config: seaboard: Move tegra-common-post to correct place   Simon Glass
      • [U-Boot] [PATCH 2/2] tegra: config: seaboard: Move tegra-common-post to correct place   Stephen Warren
      • [U-Boot] [PATCH 1/2] tegra: Remove unnecessary CONFIG_SYS_NAND_BASE   Tom Warren
      • [U-Boot] [PATCH 1/2] tegra: Remove unnecessary CONFIG_SYS_NAND_BASE   Simon Glass
      • [U-Boot] [PATCH] tegra: use generic fs commands in BOOTCOMMAND   Stephen Warren
      • [U-Boot] [PATCH] tegra: use generic fs commands in BOOTCOMMAND   Simon Glass
      • [U-Boot] [PATCH] tegra: use generic fs commands in BOOTCOMMAND   Stephen Warren
      • [U-Boot] [PATCH v2 1/2] tegra: Remove unnecessary CONFIG_SYS_NAND_BASE   Simon Glass
• [U-Boot] [PATCH] libfdt: introduce fdt type annotation for use by endian checkers   David Gibson
  • [U-Boot] [PATCH 3/4 v2] dtc/libfdt: introduce fdt types for annotation by endian checkers   Kim Phillips
    • [U-Boot] [PATCH 3/4 v2] dtc/libfdt: introduce fdt types for annotation by endian checkers   Jon Loeliger
    • [U-Boot] [PATCH v2 1/4] dtc/tests: don't include fdt.h prior to libfdt.h   Kim Phillips
    • [U-Boot] [PATCH v2 2/4] dtc/fdtdump: include libfdt_env.h prior to fdt.h   Kim Phillips
    • [U-Boot] [PATCH v3 3/4] dtc/libfdt: introduce fdt types for annotation by endian checkers   Kim Phillips
    • [U-Boot] [PATCH v3 3/4] dtc/libfdt: introduce fdt types for annotation by endian checkers   David Gibson
    • [U-Boot] [PATCH v3 3/4] dtc/libfdt: introduce fdt types for annotation by endian checkers   Kim Phillips
    • [U-Boot] [PATCH v3 3/4] dtc/libfdt: introduce fdt types for annotation by endian checkers   David Gibson
    • [U-Boot] [PATCH v4 3/4] dtc/libfdt: introduce fdt types for annotation by endian checkers   Kim Phillips
• [U-Boot] UBIFS fails on SheevaPlug   Dimax
  • [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
    • [U-Boot] UBIFS fails on SheevaPlug   Dimax
    • [U-Boot] UBIFS fails on SheevaPlug   Andreas Bießmann
    • [U-Boot] UBIFS fails on SheevaPlug   Dimax
    • [U-Boot] UBIFS fails on SheevaPlug   Vikram Narayanan
    • [U-Boot] [PATCH 0/5 v2] Add DT based ethernet driver for SMDK5250   Hatim Ali
    • [U-Boot] [PATCH 1/5 v2] EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250   Hatim Ali
    • [U-Boot] [PATCH 2/5 v2] fdt: exynos5: Add DT node definition for SROM and SMSC9215   Hatim Ali
    • [U-Boot] [PATCH 3/5 v2] exynos5: Add DT based driver for SMC911X ethernet   Hatim Ali
    • [U-Boot] [PATCH 4/5] exynos5: config: Rename the smdk5250.h to exynos5250-dt.h   Hatim Ali
    • [U-Boot] [PATCH 5/5] SMDK5250: config: Add configuration file for SMDK5250 board   Hatim Ali
    • [U-Boot] [PATCH 0/5 v2] Add DT based ethernet driver for SMDK5250   Simon Glass
    • [U-Boot] [PATCH 0/8] Add TMU support for Exynos5250 based SMDK5250   Hatim Ali
    • [U-Boot] [PATCH 1/8] EXYNOS5: FDT: Add TMU device node values   Hatim Ali
    • [U-Boot] [PATCH 1/8] EXYNOS5: FDT: Add TMU device node values   Simon Glass
    • [U-Boot] [PATCH 2/8] EXYNOS5: TMU: Add driver for Thermal Management Unit   Hatim Ali
    • [U-Boot] [PATCH 2/8] EXYNOS5: TMU: Add driver for Thermal Management Unit   Simon Glass
    • [U-Boot] [PATCH 3/8] EXYNOS5: Power down API for Thermal Management Unit   Hatim Ali
    • [U-Boot] [PATCH 3/8] EXYNOS5: Power down API for Thermal Management Unit   Simon Glass
    • [U-Boot] [PATCH 4/8] GEN: Add a poll function to monitor events   Hatim Ali
    • [U-Boot] [PATCH 4/8] GEN: Add a poll function to monitor events   Simon Glass
    • [U-Boot] [PATCH 5/8] EXYNOS5: TMU: Add TMU status polling   Hatim Ali
    • [U-Boot] [PATCH 5/8] EXYNOS5: TMU: Add TMU status polling   Simon Glass
    • [U-Boot] [PATCH 6/8] EXYNOS5: Config: Enable support for Exynos TMU driver   Hatim Ali
    • [U-Boot] [PATCH 6/8] EXYNOS5: Config: Enable support for Exynos TMU driver   Simon Glass
    • [U-Boot] [PATCH 7/8] GEN: TMU: Add u-boot command to read current temp   Hatim Ali
    • [U-Boot] [PATCH 7/8] GEN: TMU: Add u-boot command to read current temp   Simon Glass
    • [U-Boot] [PATCH 8/8] EXYNOS5: Config: Enable tmu command   Hatim Ali
    • [U-Boot] [PATCH 8/8] EXYNOS5: Config: Enable tmu command   Simon Glass
    • [U-Boot] [PATCH 0/8] Add TMU support for Exynos5250 based SMDK5250   Simon Glass
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Allen Martin
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Stephen Warren
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Marek Vasut
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Simon Glass
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Marek Vasut
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Allen Martin
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Marek Vasut
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Stephen Warren
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Marek Vasut
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Allen Martin
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Marek Vasut
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Allen Martin
    • [U-Boot] [PATCH] USB: add arrow key support to usb_kbd   Simon Glass
    • [U-Boot] [PATCH V2 1/4] Replace CONFIG_MMC_BOUNCE_BUFFER with CONFIG_BOUNCE_BUFFER in configs   Stephen Warren
    • [U-Boot] [PATCH V2 2/4] bouncebuf: remove dummy implementation   Stephen Warren
    • [U-Boot] [PATCH V2 2/4] bouncebuf: remove dummy implementation   Simon Glass
    • [U-Boot] [PATCH V2 3/4] common: rework bouncebuf implementation   Stephen Warren
    • [U-Boot] [PATCH V2 3/4] common: rework bouncebuf implementation   Simon Glass
    • [U-Boot] [PATCH V2 4/4] mmc: tegra: use bounce buffer APIs   Stephen Warren
    • [U-Boot] [PATCH V2 4/4] mmc: tegra: use bounce buffer APIs   Simon Glass
    • [U-Boot] [PATCH V2 1/4] Replace CONFIG_MMC_BOUNCE_BUFFER with CONFIG_BOUNCE_BUFFER in configs   Simon Glass
    • [U-Boot] [PATCH V2 1/4] Replace CONFIG_MMC_BOUNCE_BUFFER with CONFIG_BOUNCE_BUFFER in configs   Stephen Warren
    • [U-Boot] [PATCH] am335x_evm: Fix Ethernet LED issue on BeagleBone   Andrew Bradford
    • [U-Boot] [PATCH] am335x_evm: Fix Ethernet LED issue on BeagleBone   Andrew Bradford
    • [U-Boot] [PATCH v3 2/9] x86: Allow excluding reset vector code from u-boot   Simon Glass
    • [U-Boot] [PATCH v2] video: Provide an API to access video parameters   Anatolij Gustschin
    • [U-Boot] [PATCH v2 0/8] NAND support for AM33XX   Ilya Yanok
    • [U-Boot] [PATCH v2 1/8] OMAP: include sys_proto.h from boot-common   Ilya Yanok
    • [U-Boot] [PATCH v2 2/8] am335x_evm: add nand pinmux definition   Ilya Yanok
    • [U-Boot] [PATCH v2 3/8] am33xx: NAND support   Ilya Yanok
    • [U-Boot] [PATCH v2 3/8] am33xx: NAND support   Peter Korsgaard
    • [U-Boot] [PATCH v2 3/8] am33xx: NAND support   Ilya Yanok
    • [U-Boot] [PATCH v2 3/8] am33xx: NAND support   Peter Korsgaard
    • [U-Boot] [PATCH v2 3/8] am33xx: NAND support   Tom Rini
    • [U-Boot] [PATCH v2 4/8] am335x_evm: enable NAND support   Ilya Yanok
    • [U-Boot] [PATCH v2 5/8] am33xx: add ELM support   Ilya Yanok
    • [U-Boot] [PATCH v2 6/8] omap_gpmc: BCH8 support (ELM based)   Ilya Yanok
    • [U-Boot] [PATCH v2 6/8] omap_gpmc: BCH8 support (ELM based)   Andreas Bießmann
    • [U-Boot] [PATCH v2 6/8] omap_gpmc: BCH8 support (ELM based)   Tom Rini
    • [U-Boot] [PATCH v2 6/8] omap_gpmc: BCH8 support (ELM based)   Andreas Bießmann
    • [U-Boot] [PATCH v2 7/8] am33xx_spl_bch: simple SPL nand loader for AM33XX   Ilya Yanok
    • [U-Boot] [PATCH v2 8/8] am335x_evm: enable SPL NAND support   Ilya Yanok
    • [U-Boot] [PATCH v5 0/13] Port of MUSB driver from Linux (changes from Linux)   Ilya Yanok
    • [U-Boot] [PATCH v5 01/13] linux/usb/ch9.h: update with the version from Linux tree   Ilya Yanok
    • [U-Boot] [PATCH v5 02/13] usb: use linux/usb/ch9.h instead of usbdescriptors.h   Ilya Yanok
    • [U-Boot] [PATCH v5 03/13] musb-new: port of Linux musb driver   Ilya Yanok
    • [U-Boot] [PATCH v5 04/13] musb-new: dsps backend driver   Ilya Yanok
    • [U-Boot] [PATCH v5 05/13] am33xx: init OTG hardware and new musb gadget driver   Ilya Yanok
    • [U-Boot] [PATCH v5 06/13] am335x_evm: enable both musb gadget and host   Ilya Yanok
    • [U-Boot] [PATCH v5 07/13] musb-new: am35x backend driver   Ilya Yanok
    • [U-Boot] [PATCH v5 08/13] OMAP3: am35x_def.h: add USB defines   Ilya Yanok
    • [U-Boot] [PATCH v5 09/13] OMAP3: am35x: add musb functions   Ilya Yanok
    • [U-Boot] [PATCH v5 10/13] am3517_evm: switch to musb-new   Ilya Yanok
    • [U-Boot] [PATCH v5 11/13] musb-new: omap2plus backend driver   Ilya Yanok
    • [U-Boot] [PATCH v5 12/13] omap3_beagle: add musb-new init   Ilya Yanok
    • [U-Boot] [PATCH v5 13/13] omap3_beagle: use new MUSB intstead of the old one   Ilya Yanok
    • [U-Boot] [PATCH v2 2/7] video: Implement additional video API functions in cfb_console   Anatolij Gustschin
• [U-Boot] [PATCH 0/7] lcd/video: Add parameter API and compressed bitmaps   Anatolij Gustschin
  • [U-Boot] [PATCH 0/7] lcd/video: Add parameter API and compressed bitmaps   Simon Glass
• [U-Boot] [PATCH] MAKEALL: Add spear platform target to compile all SPEAr boards   Anatolij Gustschin
• [U-Boot] OMAP4/Panda: u-boot upgrade v2012.04.01 -> v2012.10 breaks RTC wakeups   Kevin Hilman
  • [U-Boot] OMAP4/Panda: u-boot upgrade v2012.04.01 -> v2012.10 breaks RTC wakeups   Santosh Shilimkar
    • [U-Boot] OMAP4/Panda: u-boot upgrade v2012.04.01 -> v2012.10 breaks RTC wakeups   R Sricharan
      • [U-Boot] OMAP4/Panda: u-boot upgrade v2012.04.01 -> v2012.10 breaks RTC wakeups   Kevin Hilman
      • [U-Boot] [PATCH] part: check each variable for capability calculation   Chang-Ming.Huang at freescale.com
• [U-Boot] S-o-b entries for bcm2708 SDHCI driver in the downstream R.Pi Linux kernel   Stephen Warren
  • [U-Boot] S-o-b entries for bcm2708 SDHCI driver in the downstream R.Pi Linux kernel   Oleksandr Tymoshenko
    • [U-Boot] S-o-b entries for bcm2708 SDHCI driver in the downstream R.Pi Linux kernel   Stephen Warren
      • [U-Boot] S-o-b entries for bcm2708 SDHCI driver in the downstream R.Pi Linux kernel   Oleksandr Tymoshenko
• [U-Boot] mcf523x, issue in cpu_init   Angelo Dureghello
  • [U-Boot] [PATCH 0/8 v2] Add TMU support for Exynos5250 based SMDK5250   Hatim Ali
  • [U-Boot] [PATCH 1/8 v2] EXYNOS5: FDT: Add TMU device node values   Hatim Ali
  • [U-Boot] [PATCH 2/8 v2] EXYNOS5: TMU: Add driver for Thermal Management Unit   Hatim Ali
  • [U-Boot] [PATCH 2/8 v2] EXYNOS5: TMU: Add driver for Thermal Management Unit   Simon Glass
  • [U-Boot] [PATCH 3/8 v2] EXYNOS5: Power down API for Thermal Management Unit   Hatim Ali
  • [U-Boot] [PATCH 4/8 v2] Add a poll function to monitor events   Hatim Ali
  • [U-Boot] [PATCH 5/8 v2] EXYNOS5: TMU: Add TMU status polling   Hatim Ali
  • [U-Boot] [PATCH 6/8 v2] EXYNOS5: Config: Enable support for Exynos TMU driver   Hatim Ali
  • [U-Boot] [PATCH 7/8 v2] TMU: Add u-boot command to read current temp   Hatim Ali
  • [U-Boot] [PATCH 7/8 v2] TMU: Add u-boot command to read current temp   Simon Glass
  • [U-Boot] [PATCH 8/8 v2] EXYNOS5: Config: Enable tmu command   Hatim Ali
  • [U-Boot] [PATCH 0/8 v2] Add TMU support for Exynos5250 based SMDK5250   Simon Glass
• [U-Boot] [PATCH 00/46] Enhance spear support   Stefan Roese
  • [U-Boot] [PATCH 00/46] Enhance spear support   Vipin Kumar
  • [U-Boot] [PATCH 00/46] Enhance spear support   Vipin Kumar
• [U-Boot] SMSC LAN9514 on TI DM37x board   Marek Vasut
  • [U-Boot] [PATCH] microblaze: Remove asm/bitops.h from asm/posix_types.h   Michal Simek
• [U-Boot] [PATCH 1/4] microblaze: Fix compilation warning in ext2_find_next_zero_bit   Michal Simek
  • [U-Boot] [PATCH 1/4] microblaze: Fix compilation warning in ext2_find_next_zero_bit   Marek Vasut
    • [U-Boot] [PATCH 1/4] microblaze: Fix compilation warning in ext2_find_next_zero_bit   Michal Simek
      • [U-Boot] [PATCH v2] microblaze: Fix compilation failure because of missing libdts   Michal Simek
• [U-Boot] PCIe on the i.MX6?   Greg Topmiller
  • [U-Boot] PCIe on the i.MX6?   Carolyn Smith
    • [U-Boot] PCIe on the i.MX6?   Greg Topmiller
    • [U-Boot] PCIe on the i.MX6?   Carolyn Smith
    • [U-Boot] PCIe on the i.MX6?   Greg Topmiller
• [U-Boot] [PATCH] mx35pdk:Use IMX_GPIO_NR macro   Ashok Kumar Reddy
  • [U-Boot] [PATCH] mx35pdk:Use IMX_GPIO_NR macro   Stefano Babic
• [U-Boot] [PATCH] configs:Remove unused macro CONFIG_DISCOVER_PHY   Ashok Kumar Reddy
  • [U-Boot] [PATCH] configs:Remove unused macro CONFIG_DISCOVER_PHY   Stefano Babic
• [U-Boot] [RFC, PATCH] mmc: prepare SDHCI_HOST_CONTROL for SDMA operation   Rommel G Custodio
  • [U-Boot] [RFC, PATCH] mmc: prepare SDHCI_HOST_CONTROL for SDMA operation   Jaehoon Chung
• [U-Boot] [PATCH v5 0/7] SPL: Port SPL framework to powerpc   Anatolij Gustschin
• [U-Boot] [PATCH v6 1/7] powerpc: Extract EPAPR_MAGIC constants into processor.h   Anatolij Gustschin
• [U-Boot] [PATCH] patman: Issue empty change logs for unchanged patches   Anatolij Gustschin
  • [U-Boot] [PATCH] powerpc/mpc8xxx: Fix compiling error caused in DDR driver   York Sun
  • [U-Boot] [u-boot-release] [PATCH] powerpc/mpc8xxx: Fix compiling error caused in DDR driver   Fleming Andy-AFLEMING
  • [U-Boot] [u-boot-release] [PATCH] powerpc/mpc8xxx: Fix compiling error caused in DDR driver   York Sun
  • [U-Boot] [PATCH 0/6] EXYNOS5: FDT Support for I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/6] EXYNOS5: FDT: Add I2C device node data   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/6] EXYNOS5: FDT: Add I2C device node data   Simon Glass
  • [U-Boot] [PATCH 2/6] EXYNOS5 : FDT: Add Aliases for I2C device   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/6] EXYNOS5 : FDT: Add Aliases for I2C device   Simon Glass
  • [U-Boot] [PATCH 3/6] EXYNOS5: FDT: Add compatible string for I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/6] EXYNOS5: FDT: Add compatible string for I2C   Simon Glass
  • [U-Boot] [PATCH 4/6] FDT: Api to find compatible id for a given node   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/6] FDT: Api to find compatible id for a given node   Simon Glass
  • [U-Boot] [PATCH 5/6] I2C: Driver changes for FDT support   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/6] I2C: Driver changes for FDT support   Simon Glass
  • [U-Boot] [PATCH 5/6] I2C: Driver changes for FDT support   Rajeshwari Birje
  • [U-Boot] [PATCH 5/6] I2C: Driver changes for FDT support   Simon Glass
  • [U-Boot] [PATCH 6/6] SMDK5250: Populate I2C data using FDT.   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/6] SMDK5250: Populate I2C data using FDT.   Simon Glass
  • [U-Boot] [PATCH 0/5] EXYNOS5: FDT support for Sound   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/5] EXYNOS5: FDT: Add sound device node data   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/5] EXYNOS5: FDT: Add sound device node data   Simon Glass
  • [U-Boot] [PATCH 2/5] EXYNOS5: FDT: Add sound and codec device node informations   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/5] EXYNOS5: FDT: Add sound and codec device node informations   Simon Glass
  • [U-Boot] [PATCH 3/5] EXYNOS5: FDT: Add compatible strings for sound   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/5] EXYNOS5: FDT: Add compatible strings for sound   Simon Glass
  • [U-Boot] [PATCH 4/5] Sound: Add FDT support to driver   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/5] Sound: Add FDT support to driver   Simon Glass
  • [U-Boot] [PATCH 5/5] Sound: Add FDT support to CMD.   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/5] Sound: Add FDT support to CMD.   Simon Glass
  • [U-Boot] [PATCH V3 1/4] ARM: bcm2835: add mailbox driver   Stephen Warren
  • [U-Boot] [PATCH V3 2/4] ARM: rpi_b: use bcm2835 mbox driver to get memory size   Stephen Warren
  • [U-Boot] [PATCH V3 3/4] lcd: calculate line_length after lcd_ctrl_init()   Stephen Warren
  • [U-Boot] [PATCH V3 3/4] lcd: calculate line_length after lcd_ctrl_init()   Anatolij Gustschin
  • [U-Boot] [PATCH V3 3/4] lcd: calculate line_length after lcd_ctrl_init()   Albert ARIBAUD
  • [U-Boot] [PATCH V3 4/4] video: add a driver for the bcm2835   Stephen Warren
  • [U-Boot] [PATCH V3 4/4] video: add a driver for the bcm2835   Anatolij Gustschin
  • [U-Boot] [PATCH V2 1/2] mmc: add bcm2835 driver   Stephen Warren
  • [U-Boot] [PATCH V2 2/2] ARM: rpi_b: enable SD controller, add related env/cmds   Stephen Warren
  • [U-Boot] [PATCH V2 1/2] mmc: add bcm2835 driver   Albert ARIBAUD
  • [U-Boot] [PATCH V2 1/2] mmc: add bcm2835 driver   Stephen Warren
  • [U-Boot] [PATCH V2 1/2] mmc: add bcm2835 driver   Albert ARIBAUD
  • [U-Boot] [PATCH] driver/mtd/IFC:Wait tWB time, poll R/B before command execution   Prabhakar Kushwaha
  • [U-Boot] [PATCH 0/8 v3] Add TMU support for Exynos5250 based SMDK5250   Hatim Ali
  • [U-Boot] [PATCH 1/8 v3] EXYNOS5: FDT: Add TMU device node values   Hatim Ali
  • [U-Boot] [PATCH 2/8 v3] EXYNOS5: TMU: Add driver for Thermal Management Unit   Hatim Ali
  • [U-Boot] [PATCH 3/8 v3] EXYNOS5: Power down API for Thermal Management Unit   Hatim Ali
  • [U-Boot] [PATCH 4/8 v3] Add a poll function to monitor events   Hatim Ali
  • [U-Boot] [PATCH 5/8 v3] EXYNOS5: TMU: Add TMU status polling   Hatim Ali
  • [U-Boot] [PATCH 6/8 v3] EXYNOS5: Config: Enable support for Exynos TMU driver   Hatim Ali
  • [U-Boot] [PATCH 7/8 v3] TMU: Add u-boot command to read current temp   Hatim Ali
  • [U-Boot] [PATCH 8/8 v3] EXYNOS5: Config: Enable tmu command   Hatim Ali
  • [U-Boot] [PATCH 0/8 v3] Add TMU support for Exynos5250 based SMDK5250   Simon Glass
  • [U-Boot] [PATCH 0/8 v3] Add TMU support for Exynos5250 based SMDK5250   Hatim Rv
• [U-Boot] [PATCH v2 09/25] common/cmd_*.c: sparse fixes   Wolfgang Denk
  • [U-Boot] [PATCH v2 09/25] common/cmd_*.c: sparse fixes   Kim Phillips
• [U-Boot] [PATCH v2 13/25] lib/zlib: sparse fixes   Wolfgang Denk
  • [U-Boot] [PATCH v2 13/25] lib/zlib: sparse fixes   Kim Phillips
    • [U-Boot] [PATCH v2 13/25] lib/zlib: sparse fixes   Tom Rini
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
  • [U-Boot] Pull request: u-boot-staging   Tom Rini
• [U-Boot] Kirkwood register and interrupt issues   Bernhard Schuster
• [U-Boot] where would i find the u-boot repo with TI DM8148 support?   Robert P. J. Day
  • [U-Boot] where would i find the u-boot repo with TI DM8148 support?   Alexandre Belloni
  • [U-Boot] where would i find the u-boot repo with TI DM8148 support?   John Rigby
    • [U-Boot] U-Boot NAND-Access   Peter Niklas
      • [U-Boot] U-Boot NAND-Access   Wolfgang Denk
      • [U-Boot] U-Boot NAND-Access   Scott Wood
      • [U-Boot] U-Boot NAND-Access   Peter Niklas
      • [U-Boot] U-Boot NAND-Access   Scott Wood
      • [U-Boot] [PATCH 1/2] hush: Treat trailing || and && as incomplete statements   Joe Hershberger
      • [U-Boot] [PATCH 1/2] hush: Treat trailing || and && as incomplete statements   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] hush: Treat trailing || and && as incomplete statements   Joe Hershberger
      • [U-Boot] [PATCH 2/2] hush: Prevent pipe errors from being silently ignored   Joe Hershberger
      • [U-Boot] [PATCH] Allow CONFIG_BOARD_SIZE_LIMIT to be specified in hex   Joe Hershberger
      • [U-Boot] [PATCH] powerpc/mpc85xx: Fix a bug introduced by CONFIG_PPC_SPINTABLE_COMPATIBLE   York Sun
• [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property   Kim Phillips
  • [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property   Simon Glass
  • [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property   Jerry Van Baren
    • [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property   Kim Phillips
      • [U-Boot] [PATCH v6 00/26] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
      • [U-Boot] [PATCH v6 02/26] pmic:i2c: Add I2C sensor byte order (big/little) to PMIC framework   Lukasz Majewski
      • [U-Boot] [PATCH v6 03/26] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C   Lukasz Majewski
      • [U-Boot] [PATCH v6 04/26] pmic: Extend PMIC framework to support multiple instances of PMIC devices   Lukasz Majewski
      • [U-Boot] [PATCH v6 04/26] pmic: Extend PMIC framework to support multiple instances of PMIC devices   Anatolij Gustschin
      • [U-Boot] [PATCH v6 04/26] pmic: Extend PMIC framework to support multiple instances of PMIC devices   Lukasz Majewski
      • [U-Boot] [PATCH v6 05/26] pmic: Introduce power_init_board() method at ./lib/board.c file   Lukasz Majewski
      • [U-Boot] [PATCH v6 06/26] pmic: Enable power_board_init() support at TRATS   Lukasz Majewski
      • [U-Boot] [PATCH v6 07/26] pmic:chrg: Common information about charger and battery (power_chrg.h)   Lukasz Majewski
      • [U-Boot] [PATCH v6 08/26] pmic: Move pmic related code to ./drivers/power directory   Lukasz Majewski
      • [U-Boot] [PATCH v6 09/26] pmic: Extend struct pmic to support battery and charger related operations   Lukasz Majewski
      • [U-Boot] [PATCH v6 10/26] pmic:battery: Support for Trats Battery at PMIC framework   Lukasz Majewski
      • [U-Boot] [PATCH v6 10/26] pmic:battery: Support for Trats Battery at PMIC framework   Anatolij Gustschin
      • [U-Boot] [PATCH v6 11/26] pmic:muic: Support for MUIC built into MAX8997 device   Lukasz Majewski
      • [U-Boot] [PATCH v6 11/26] pmic:muic: Support for MUIC built into MAX8997 device   Anatolij Gustschin
      • [U-Boot] [PATCH v6 12/26] pmic:fuel-gauge: Support for MAX17042 fuel-gauge   Lukasz Majewski
      • [U-Boot] [PATCH v6 13/26] pmic:max8997: Function for calculating LDO internal register value   Lukasz Majewski
      • [U-Boot] [PATCH v6 14/26] arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v6 15/26] arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v6 16/26] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v6 17/26] arm:trats:pmic: Enable battery support at Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v6 18/26] pmic:max8997: Support for MAX8997 internal charger control   Lukasz Majewski
      • [U-Boot] [PATCH v6 19/26] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v6 20/26] arm:trats:pmic: Support for charging battery at Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v6 21/26] pmic: Extend PMIC framework to support battery related commands   Lukasz Majewski
      • [U-Boot] [PATCH v6 22/26] power:pmic: Rename ./drivers/power/pmic_* to ./drivers/power/power_* files   Lukasz Majewski
      • [U-Boot] [PATCH v6 23/26] power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER   Lukasz Majewski
      • [U-Boot] [PATCH v6 24/26] power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWER   Lukasz Majewski
      • [U-Boot] [PATCH v6 25/26] arm:goni:pmic: Adjust GONI target platform board to new PMIC framework   Lukasz Majewski
      • [U-Boot] [PATCH v6 26/26] arm:universal_c210:pmic: Adjust C210 Universal target platform board to new PMIC framework   Lukasz Majewski
      • [U-Boot] [PATCH v6 01/26] pmic:i2c: Handle PMIC I2C transmission comprising of two bytes   Lukasz Majewski
      • [U-Boot] [PATCH v4 0/7] gpt: GUID Partition Table (GPT) restoration   Piotr Wilczek
      • [U-Boot] [PATCH v4 3/7] gpt:doc: GPT (GUID Partition Table) documentation   Piotr Wilczek
      • [U-Boot] [PATCH v4 3/7] gpt:doc: GPT (GUID Partition Table) documentation   Stephen Warren
      • [U-Boot] [PATCH v4 4/7] gpt: The leXX_to_int() calls replaced with ones defined at <compiler.h>   Piotr Wilczek
      • [U-Boot] [PATCH v4 6/7] gpt: Support for new "gpt" command   Piotr Wilczek
      • [U-Boot] [PATCH v4 6/7] gpt: Support for new "gpt" command   Stephen Warren
      • [U-Boot] [PATCH v4 6/7] gpt: Support for new "gpt" command   Piotr Wilczek
      • [U-Boot] [PATCH v4 6/7] gpt: Support for new "gpt" command   Stephen Warren
      • [U-Boot] [PATCH v4 6/7] gpt: Support for new "gpt" command   Piotr Wilczek
      • [U-Boot] [PATCH v4 6/7] gpt: Support for new "gpt" command   Stephen Warren
      • [U-Boot] [PATCH v4 7/7] gpt: Enable support for GPT partition table restoration at Samsung's Trats   Piotr Wilczek
      • [U-Boot] [PATCH v4 4/7] gpt: The leXX_to_int() calls replaced with ones defined at <compiler.h>   Stephen Warren
      • [U-Boot] [PATCH v4 0/7] gpt: GUID Partition Table (GPT) restoration   Tom Rini
      • [U-Boot] [PATCH v4 1/7] vsprintf:fix: Change type returned by ustrtoul   Piotr Wilczek
      • [U-Boot] [PATCH v4 1/7] vsprintf:fix: Change type returned by ustrtoul   Stephen Warren
      • [U-Boot] [PATCH v4 2/7] part:efi: Move part_efi.h file to ./include   Piotr Wilczek
      • [U-Boot] [PATCH v4 2/7] part:efi: Move part_efi.h file to ./include   Stephen Warren
      • [U-Boot] [PATCH v4 2/7] part:efi: Move part_efi.h file to ./include   Tom Rini
      • [U-Boot] [PATCH v4 2/7] part:efi: Move part_efi.h file to ./include   Lukasz Majewski
      • [U-Boot] [PATCH v4 5/7] gpt: Support for GPT (GUID Partition Table) restoration   Piotr Wilczek
      • [U-Boot] [PATCH v4 5/7] gpt: Support for GPT (GUID Partition Table) restoration   Stephen Warren
      • [U-Boot] [PATCH v4 5/7] gpt: Support for GPT (GUID Partition Table) restoration   Piotr Wilczek
      • [U-Boot] [PATCH v4 5/7] gpt: Support for GPT (GUID Partition Table) restoration   Lukasz Majewski
      • [U-Boot] [PATCH v4 5/7] gpt: Support for GPT (GUID Partition Table) restoration   Stephen Warren
      • [U-Boot] [PATCH v4 5/7] gpt: Support for GPT (GUID Partition Table) restoration   Stephen Warren
      • [U-Boot] [PATCH v4 5/7] gpt: Support for GPT (GUID Partition Table) restoration   Piotr Wilczek
• [U-Boot] Pull request - microblaze   Michal Simek
  • [U-Boot] Pull request - microblaze   Tom Rini
• [U-Boot] [PATCH 00/46] Enhance spear support   Stefan Roese
  • [U-Boot] [PATCH 00/46] Enhance spear support   Albert ARIBAUD
    • [U-Boot] [PATCH 00/46] Enhance spear support   Stefan Roese
      • [U-Boot] [PATCH 00/46] Enhance spear support   Wolfgang Denk
      • [U-Boot] [PATCH 00/46] Enhance spear support   Albert ARIBAUD
      • [U-Boot] [PATCH 00/46] Enhance spear support   Armando Visconti
      • [U-Boot] [PATCH 00/46] Enhance spear support   Vipin Kumar
      • [U-Boot] [PATCH 00/46] Enhance spear support   Wolfgang Denk
      • [U-Boot] [PATCH 00/46] Enhance spear support   Armando Visconti
      • [U-Boot] [PATCH 00/46] Enhance spear support   Wolfgang Denk
      • [U-Boot] [PATCH 00/46] Enhance spear support   Armando Visconti
• [U-Boot] updated observations related to OMAP in u-boot   Robert P. J. Day
  • [U-Boot] Documentation about Falcon Mode   Otavio Salvador
    • [U-Boot] Documentation about Falcon Mode   Anatolij Gustschin
      • [U-Boot] Documentation about Falcon Mode   Marek Vasut
      • [U-Boot] Documentation about Falcon Mode   Henrik Nordström
    • [U-Boot] Documentation about Falcon Mode   Stefano Babic
      • [U-Boot] Documentation about Falcon Mode   Marek Vasut
      • [U-Boot] Documentation about Falcon Mode   Stefano Babic
      • [U-Boot] Documentation about Falcon Mode   Marek Vasut
• [U-Boot] [STATUS] ARM: u-boot-arm/master has merged u-boot/master up to 59852d03   Albert ARIBAUD
• [U-Boot] [PATCH V1 2/5] mx6: use CONFIG_MX6 instead of CONFIG_MX6Q   Stefano Babic
• [U-Boot] [PATCH V1 3/5] imx-common: cpu: add imx_ddr_size   Stefano Babic
• [U-Boot] [PATCH V1 4/5] arch-mx6: add mx6dl_pins.h   Stefano Babic
• [U-Boot] [PATCH V1 1/5] mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite   Stefano Babic
• [U-Boot] [PATCH V1 5/5] imximage.cfg: run files through C preprocessor   Stefano Babic
• [U-Boot] [PATCH V3 0/9] separate miiphy from ethernet   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
  • [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost)   Albert ARIBAUD
  • [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost)   Yann Vernier
• [U-Boot] [PATCH 2/2] socfpga/spl: Remove malloc.h   Albert ARIBAUD
• [U-Boot] analyze/change assembly code   Albert ARIBAUD
  • [U-Boot] analyze/change assembly code   Gerlando Falauto
• [U-Boot] [PATCH v2] arm1136: Fix enable_caches()   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-nios/master   Thomas Chou
  • [U-Boot] Pull request: u-boot-nios/master   Tom Rini
    • [U-Boot] [PATCH v2] mx51evk: Fix build error when CONFIG_VIDEO is disabled   Anatolij Gustschin
    • [U-Boot] [PATCH v2] mx51evk: Fix build error when CONFIG_VIDEO is disabled   Anatolij Gustschin
    • [U-Boot] [PATCH v2] mx51evk: Fix build error when CONFIG_VIDEO is disabled   Anatolij Gustschin
    • [U-Boot] [PATCH v2] mx51evk: Fix build error when CONFIG_VIDEO is disabled   Anatolij Gustschin
    • [U-Boot] [PATCH v2] mx53loco: Fix build error when CONFIG_VIDEO is disabled   Anatolij Gustschin
    • [U-Boot] [PATCH v2] mx53loco: Fix build error when CONFIG_VIDEO is disabled   Anatolij Gustschin
• [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Angelo Dureghello
  • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Angelo Dureghello
    • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Marek Vasut
    • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Wolfgang Denk
      • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Angelo Dureghello
      • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Henrik Nordström
      • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Wolfgang Denk
      • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Angelo Dureghello
      • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Wolfgang Denk
      • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Angelo Dureghello
      • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Angelo Dureghello
      • [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes   Wolfgang Denk
      • [U-Boot] [PATCH 1/3] fw_env: fix type of len   Mike Frysinger
      • [U-Boot] [PATCH 2/3] fw_env: fix incorrect usage of open(O_CREAT)   Mike Frysinger
      • [U-Boot] [PATCH 3/3] fw_env: fix building w/out a config.h   Mike Frysinger
      • [U-Boot] [PATCH 3/3] fw_env: fix building w/out a config.h   Peter Korsgaard
• [U-Boot] [PATCH] cmd_mmc.c: Fix typo, "dislay" -> "display"   Robert P. J. Day
  • [U-Boot] [PATCH] cmd_mmc.c: Fix typo, "dislay" -> "display"   Benoît Thébaudeau
    • [U-Boot] [PATCH] cmd_mmc.c: Fix typo, "dislay" -> "display"   Robert P. J. Day
      • [U-Boot] [PATCH] cmd_mmc.c: Fix typo, "dislay" -> "display"   Wolfgang Denk
      • [U-Boot] [PATCH] cmd_mmc.c: Fix typo, "dislay" -> "display"   Robert P. J. Day
  • [U-Boot] [PATCH] cmd_mmc.c: Fix typo, "dislay" -> "display"   Anatolij Gustschin
• [U-Boot] any value in defining specifically a beagleboard xM config file?   Robert P. J. Day
  • [U-Boot] any value in defining specifically a beagleboard xM config file?   Wolfgang Denk
    • [U-Boot] any value in defining specifically a beagleboard xM config file?   Robert P. J. Day
  • [U-Boot] any value in defining specifically a beagleboard xM config file?   Robert Nelson
• [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue   Andreas Puls
  • [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue   Vasily Khoruzhick
    • [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue   Rommel G Custodio
      • [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue   Andreas Puls
      • [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue   Andreas Puls
      • [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue   Marek Vasut
    • [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue   Andreas Puls
  • [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue   Marek Vasut
    • [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue   Andreas Puls
• [U-Boot] [PATCH] cmd_led.c: Standardize format of help and usage info.   Robert P. J. Day
  • [U-Boot] [PATCH] ARM: at91sam9m10/9g10: increase the size for u-boot   Bo Shen
  • [U-Boot] [PATCH] ARM: at91sam9263: increase the size for u-boot   Bo Shen
• [U-Boot] Want to burn a u-boot to a customized board   narke
  • [U-Boot] Want to burn a u-boot to a customized board   Angelo Dureghello
    • [U-Boot] Want to burn a u-boot to a customized board   woody
    • [U-Boot] Want to burn a u-boot to a customized board   narke
• [U-Boot] [PATCH] omap3_beagle.h: Fix comment for true/false return value.   Robert P. J. Day
  • [U-Boot] [PATCH] Add README for the "Falcon" mode   Stefano Babic
  • [U-Boot] [PATCH] Add README for the "Falcon" mode   Andreas Bießmann
  • [U-Boot] [PATCH] Add README for the "Falcon" mode   Stefano Babic
  • [U-Boot] [PATCH] Add README for the "Falcon" mode   Andreas Bießmann
  • [U-Boot] [PATCH v2 1/2] Add README for the "Falcon" mode   Stefano Babic
  • [U-Boot] [PATCH v2 1/2] Add README for the "Falcon" mode   Thomas Weber
  • [U-Boot] [PATCH v2 1/2] Add README for the "Falcon" mode   Andreas Bießmann
  • [U-Boot] [PATCH v2 1/2] Add README for the "Falcon" mode   Stefano Babic
  • [U-Boot] [PATCH v2 1/2] Add README for the "Falcon" mode   Otavio Salvador
  • [U-Boot] [PATCH v2 1/2] Add README for the "Falcon" mode   Stefano Babic
  • [U-Boot] [PATCH v2 1/2] Add README for the "Falcon" mode   Otavio Salvador
  • [U-Boot] [PATCH v3 1/3] Add README for the "Falcon" mode   Stefano Babic
  • [U-Boot] [PATCH v3 2/3] OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define   Stefano Babic
  • [U-Boot] [PATCH v3 3/3] SPL: Change description for spl command   Stefano Babic
  • [U-Boot] [PATCH v3 3/3] SPL: Change description for spl command   Andreas Bießmann
  • [U-Boot] [PATCH v3 1/3] Add README for the "Falcon" mode   Otavio Salvador
  • [U-Boot] [PATCH v3 1/3] Add README for the "Falcon" mode   Stefano Babic
  • [U-Boot] [PATCH v3 1/3] Add README for the "Falcon" mode   Andreas Bießmann
  • [U-Boot] [PATCH v3 1/3] Add README for the "Falcon" mode   Stefano Babic
  • [U-Boot] [PATCH v4 1/3] Add README for the "Falcon" mode   Stefano Babic
  • [U-Boot] [PATCH v4 1/3] Add README for the "Falcon" mode   Vikram Narayanan
  • [U-Boot] [PATCH v4 1/3] Add README for the "Falcon" mode   Andreas Bießmann
  • [U-Boot] [PATCH v4 1/3] Add README for the "Falcon" mode   Vikram Narayanan
  • [U-Boot] [PATCH v4 1/3] Add README for the "Falcon" mode   Stefano Babic
• [U-Boot] wanting a couple clarifications on the boards.cfg file   Robert P. J. Day
  • [U-Boot] wanting a couple clarifications on the boards.cfg file   Henrik Nordström
    • [U-Boot] wanting a couple clarifications on the boards.cfg file   Robert P. J. Day
  • [U-Boot] [PATCH] mv-common.h: increase malloc arena to 4MiB   Dimax
    • [U-Boot] [PATCH 1/7] i2c: Use __weak instead of __attribute__((weak, alias))   Marek Vasut
    • [U-Boot] [PATCH 2/7] i2c: Staticize local functions in mxc i2c driver   Marek Vasut
    • [U-Boot] [PATCH 3/7] i2c: kerneldoc: Add kerneldoc annotations to cmd_i2c.c   Marek Vasut
    • [U-Boot] [PATCH 4/7] i2c: mxs: Abstract out the MXS I2C speed setup   Marek Vasut
    • [U-Boot] [PATCH 4/7] i2c: mxs: Abstract out the MXS I2C speed setup   Wolfgang Denk
    • [U-Boot] [PATCH 4/7] i2c: mxs: Abstract out the MXS I2C speed setup   Marek Vasut
    • [U-Boot] [PATCH 5/7] i2c: mxs: Implement i2c_get/set_bus_speed()   Marek Vasut
    • [U-Boot] [PATCH 6/7] i2c: mxs: Use i2c_set_bus_speed() in i2c_init()   Marek Vasut
    • [U-Boot] [PATCH 7/7] i2c: mxs: Fix TIMING2 register value   Marek Vasut
    • [U-Boot] [PATCH 1/7] i2c: Use __weak instead of __attribute__((weak, alias))   Wolfgang Denk
    • [U-Boot] [PATCH 1/7] i2c: Use __weak instead of __attribute__((weak, alias))   Marek Vasut
• [U-Boot] MPC8306SOM U-Boot issue   Easwar Balasubramanian
  • [U-Boot] MPC8306SOM U-Boot issue   Wolfgang Denk
    • [U-Boot] [PATCH v2] ARM: at91 series: increase size for u-boot and change bootargs   Bo Shen
    • [U-Boot] [PATCH v2] ARM: at91 series: increase size for u-boot and change bootargs   Andreas Bießmann
    • [U-Boot] [PATCH v2] ARM: at91 series: increase size for u-boot and change bootargs   Bo Shen
• [U-Boot] U-Boot 2012.10 - pxa270 CPU Unknown / no turbo   Andreas Puls
  • [U-Boot] U-Boot 2012.10 - pxa270 CPU Unknown / no turbo   Marek Vasut
    • [U-Boot] U-Boot 2012.10 - pxa270 CPU Unknown / no turbo   Andreas Puls
      • [U-Boot] U-Boot 2012.10 - pxa270 CPU Unknown / no turbo   Marek Vasut
      • [U-Boot] U-Boot 2012.10 - pxa270 CPU Unknown / no turbo   Andreas Puls
      • [U-Boot] U-Boot 2012.10 - pxa270 CPU Unknown / no turbo   Marek Vasut
      • [U-Boot] [PATCH v2 2/2] OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define   Stefano Babic
      • [U-Boot] [PATCH v2 2/2] OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define   Thomas Weber
• [U-Boot] Silence "make clean"   Wolfgang Denk
  • [U-Boot] Silence "make clean"   Marek Vasut
    • [U-Boot] Silence "make clean"   Wolfgang Denk
      • [U-Boot] Silence "make clean"   Andreas Bießmann
      • [U-Boot] Silence "make clean"   Marek Vasut
      • [U-Boot] Silence "make clean"   Andreas Bießmann
      • [U-Boot] Silence "make clean"   Marek Vasut
      • [U-Boot] [PATCH] Makefile: silence 'make clean'   Andreas Bießmann
      • [U-Boot] [PATCH] Makefile: silence 'make clean'   Anatolij Gustschin
      • [U-Boot] [PATCH] Makefile: silence 'make clean'   Dirk Behme
      • [U-Boot] [PATCH v7 00/26] pmic: Redesign PMIC framework to support multiple instances of devices   Lukasz Majewski
      • [U-Boot] [PATCH v7 01/26] pmic:i2c: Handle PMIC I2C transmission comprising of two bytes   Lukasz Majewski
      • [U-Boot] [PATCH v7 02/26] pmic:i2c: Add I2C sensor byte order (big/little) to PMIC framework   Lukasz Majewski
      • [U-Boot] [PATCH v7 03/26] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C   Lukasz Majewski
      • [U-Boot] [PATCH v7 04/26] pmic: Extend PMIC framework to support multiple instances of PMIC devices   Lukasz Majewski
      • [U-Boot] [PATCH v7 05/26] pmic: Introduce power_init_board() method at ./lib/board.c file   Lukasz Majewski
      • [U-Boot] [PATCH v7 06/26] pmic: Enable power_board_init() support at TRATS   Lukasz Majewski
      • [U-Boot] [PATCH v7 07/26] pmic:chrg: Common information about charger and battery (power_chrg.h)   Lukasz Majewski
      • [U-Boot] [PATCH v7 08/26] pmic: Move pmic related code to ./drivers/power directory   Lukasz Majewski
      • [U-Boot] [PATCH v7 09/26] pmic: Extend struct pmic to support battery and charger related operations   Lukasz Majewski
      • [U-Boot] [PATCH v7 10/26] pmic:battery: Support for Trats Battery at PMIC framework   Lukasz Majewski
      • [U-Boot] [PATCH v7 11/26] pmic:muic: Support for MUIC built into MAX8997 device   Lukasz Majewski
      • [U-Boot] [PATCH v7 12/26] pmic:fuel-gauge: Support for MAX17042 fuel-gauge   Lukasz Majewski
      • [U-Boot] [PATCH v7 13/26] pmic:max8997: Function for calculating LDO internal register value   Lukasz Majewski
      • [U-Boot] [PATCH v7 14/26] arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v7 15/26] arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v7 16/26] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v7 17/26] arm:trats:pmic: Enable battery support at Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v7 18/26] pmic:max8997: Support for MAX8997 internal charger control   Lukasz Majewski
      • [U-Boot] [PATCH v7 19/26] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v7 20/26] arm:trats:pmic: Support for charging battery at Samsung's TRATS board   Lukasz Majewski
      • [U-Boot] [PATCH v7 21/26] pmic: Extend PMIC framework to support battery related commands   Lukasz Majewski
      • [U-Boot] [PATCH v7 22/26] power:pmic: Rename ./drivers/power/pmic_* to ./drivers/power/power_* files   Lukasz Majewski
      • [U-Boot] [PATCH v7 23/26] power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER   Lukasz Majewski
      • [U-Boot] [PATCH v7 24/26] power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWER   Lukasz Majewski
      • [U-Boot] [PATCH v7 25/26] arm:goni:pmic: Adjust GONI target platform board to new PMIC framework   Lukasz Majewski
      • [U-Boot] [PATCH v7 26/26] arm:universal_c210:pmic: Adjust C210 Universal target platform board to new PMIC framework   Lukasz Majewski
      • [U-Boot] [PATCH v7 00/26] pmic: Redesign PMIC framework to support multiple instances of devices   Anatolij Gustschin
      • [U-Boot] [PATCH] Pass sdrc timing values through board_sdrc_timings structure   Peter Barada
• [U-Boot] [PATCH] omap3: Add a few comments to "#endif"s for readability.   Robert P. J. Day
• [U-Boot] [PATCH] omap4: Add comments on some "#endif"s for readability.   Robert P. J. Day
  • [U-Boot] [PATCH] omap4: Add comments on some "#endif"s for readability.   R Sricharan
• [U-Boot] [PATCH] nand_spl: fix u-boot.lst breakage   Scott Wood
  • [U-Boot] [PATCH] nand_spl: fix u-boot.lst breakage   Marek Vasut
    • [U-Boot] [PATCH] nand_spl: fix u-boot.lst breakage   Wolfgang Denk
  • [U-Boot] [PATCH] nand_spl: fix u-boot.lst breakage   Anatolij Gustschin
• [U-Boot] [PATCH v3] powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot   Scott Wood
• [U-Boot] [PATCH v2 00/22] Convert p1_p2_rdb_pc to new spl   Scott Wood
  • [U-Boot] [PATCH] omap: emif: configure emif only when required   Lokesh Vutla
  • [U-Boot] [PATCH] omap: emif: configure emif only when required   R Sricharan
  • [U-Boot] [PATCH] omap: emif: configure emif only when required   Lokesh Vutla
  • [U-Boot] [PATCH 0/6 V2] EXYNOS5: FDT Support for I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/6 V2] SMDK5250: Initialise I2C using FDT   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/6 V2] SMDK5250: Initialise I2C using FDT   Simon Glass
  • [U-Boot] [PATCH 6/6 V2] SMDK5250: Initialise I2C using FDT   Heiko Schocher
  • [U-Boot] [PATCH 0/6 V2] EXYNOS5: FDT Support for I2C   Simon Glass
  • [U-Boot] [PATCH 1/6 V2] EXYNOS5: FDT: Add I2C device node data   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/6 V2] EXYNOS5: FDT: Add I2C device node data   Heiko Schocher
  • [U-Boot] [PATCH 1/6 V2] EXYNOS5: FDT: Add I2C device node data   Rajeshwari Birje
  • [U-Boot] [PATCH 1/6 V2] EXYNOS5: FDT: Add I2C device node data   Minkyu Kang
  • [U-Boot] [PATCH 1/6 V2] EXYNOS5: FDT: Add I2C device node data   Heiko Schocher
  • [U-Boot] [PATCH 1/6 V2] EXYNOS5: FDT: Add I2C device node data   Simon Glass
  • [U-Boot] [PATCH 1/6 V2] EXYNOS5: FDT: Add I2C device node data   Minkyu Kang
  • [U-Boot] [PATCH 2/6 V2] EXYNOS5 : FDT: Add Aliases for I2C device   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/6 V2] EXYNOS5 : FDT: Add Aliases for I2C device   Heiko Schocher
  • [U-Boot] [PATCH 3/6 V2] EXYNOS5: FDT: Add compatible string for I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/6 V2] EXYNOS5: FDT: Add compatible string for I2C   Heiko Schocher
  • [U-Boot] [PATCH 4/6 V2] FDT: Api to find compatible id for a given node   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/6 V2] FDT: Api to find compatible id for a given node   Heiko Schocher
  • [U-Boot] [PATCH 5/6 V2] I2C: Driver changes for FDT support   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/6 V2] I2C: Driver changes for FDT support   Simon Glass
  • [U-Boot] [PATCH 5/6 V2] I2C: Driver changes for FDT support   Heiko Schocher
  • [U-Boot] [PATCH 5/6 V2] I2C: Driver changes for FDT support   Rajeshwari Birje
  • [U-Boot] [PATCH 5/6 V2] I2C: Driver changes for FDT support   Heiko Schocher
• [U-Boot] Bug in netconsole?   Nick Thompson
  • [U-Boot] Bug in netconsole?   Joe Hershberger
    • [U-Boot] [PATCH] Video: fix compiler warnings in bus_vcxk   Jens Scharsig (BuS Elektronik)
    • [U-Boot] [PATCH] Video: fix compiler warnings in bus_vcxk   Anatolij Gustschin
    • [U-Boot] [PATCH V3 00/12] Blackfin: add new processor and board   Bob Liu
    • [U-Boot] [PATCH V3 01/12] Blackfin: Bf60x: new processor header files   Bob Liu
    • [U-Boot] [PATCH V3 02/12] Blackfin: bf60x: add serial support   Bob Liu
    • [U-Boot] [PATCH V3 03/12] Blackfin: bf60x: add dma support   Bob Liu
    • [U-Boot] [PATCH V3 04/12] Blackfin: bf60x: support big cplb page   Bob Liu
    • [U-Boot] [PATCH V3 05/12] Blackfin: bf60x: add rsi/sdh support   Bob Liu
    • [U-Boot] [PATCH V3 06/12] Blackfin: bf609-ezkit: implement soft switch   Bob Liu
    • [U-Boot] [PATCH V3 07/12] Blackfin: spi: add bf6xx spi driver   Bob Liu
    • [U-Boot] [PATCH V3 08/12] Blackfin: bf60x: add gpio support   Bob Liu
    • [U-Boot] [PATCH V3 09/12] Blackfin: bf60x: core support   Bob Liu
    • [U-Boot] [PATCH V3 10/12] blackfin: bf609: add board support   Bob Liu
    • [U-Boot] [PATCH V3 11/12] Blackfin: bf60x: add hw watchdog support   Bob Liu
    • [U-Boot] [PATCH V3 12/12] Blackfin: bf60x: add resume from hibernate   Bob Liu
  • [U-Boot] [PATCH V2] M68K: eb_cpu5282: general update and enhanced board support   esw at bus-elektronik.de
    • [U-Boot] [PATCH V2] M68K: eb_cpu5282: general update and enhanced board support   Anatolij Gustschin
• [U-Boot] [PATCH V2] M68K: eb_cpu5282: general update and enhanced board support   Anatolij Gustschin
• [U-Boot] [PATCH] README: Explain how to generate the CHANGELOG file.   Robert P. J. Day
• [U-Boot] [PATCH] fs: zfs: fix illegal use of fp   Anatolij Gustschin
• [U-Boot] [PATCH v3] fs/fs.c: do_fsload: measure throughput   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
  • [U-Boot] Pull request: u-boot-staging   Tom Rini
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
  • [U-Boot] Pull request: u-boot-video/master   Tom Rini
• [U-Boot] how are "CONFIG_*" variables processed by Makefiles?   Robert P. J. Day
  • [U-Boot] how are "CONFIG_*" variables processed by Makefiles?   Benoît Thébaudeau
    • [U-Boot] how are "CONFIG_*" variables processed by Makefiles?   Robert P. J. Day
• [U-Boot] what does it mean when "SOBJS" refers to a C source file?   Robert P. J. Day
  • [U-Boot] what does it mean when "SOBJS" refers to a C source file?   Albert ARIBAUD
    • [U-Boot] what does it mean when "SOBJS" refers to a C source file?   Robert P. J. Day
      • [U-Boot] what does it mean when "SOBJS" refers to a C source file?   Albert ARIBAUD
      • [U-Boot] [PATCH v2 4/4] dtc/libfdt: uintXX_t to fdtXX_t conversion   Kim Phillips
• [U-Boot] U-Boot serial booting still supported?   andyjjones
  • [U-Boot] U-Boot serial booting still supported?   Wolfgang Denk
    • [U-Boot] [PATCH] usb: r8a6659: Fix build by missing of parenthesis   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] usb: r8a6659: Fix build by missing of parenthesis   Marek Vasut
• [U-Boot] [PATCH 2/2] usb: r8a66597: Switched from variable to only macro   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 2/2] usb: r8a66597: Switched from variable to only macro   Marek Vasut
• [U-Boot] P2020rdb :- process hangs while invalidate_tlb's   vidya Krishnamoorthy
  • [U-Boot] [PATCH] include/linux/byteorder: Always defines __fswab64, __swab64p and __swab64s   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2] include/linux/byteorder: Always defines __fswab64, __swab64p and __swab64s   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2] include/linux/byteorder: Always defines __fswab64, __swab64p and __swab64s   Kim Phillips
  • [U-Boot] [PATCH v2] include/linux/byteorder: Always defines __fswab64, __swab64p and __swab64s   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 0/6] Bring new I2C framwork to Samsung Trats board   Piotr Wilczek
  • [U-Boot] [PATCH 1/6] exynos:clock: Add i2c clock   Piotr Wilczek
  • [U-Boot] [PATCH 2/6] exynos:cpu: Add Exynos4 I2C spacing   Piotr Wilczek
  • [U-Boot] [PATCH 3/6] exynos:pinmux: Add pinmux support for i2c   Piotr Wilczek
  • [U-Boot] [PATCH 4/6] drivers:i2c: Modify I2C driver for Exynos4   Piotr Wilczek
  • [U-Boot] [PATCH 5/6] WIP: i2c: s3c24x0: modify driver for new I2C framework   Piotr Wilczek
  • [U-Boot] [PATCH 5/6] WIP: i2c: s3c24x0: modify driver for new I2C framework   Heiko Schocher
  • [U-Boot] [PATCH 5/6] WIP: i2c: s3c24x0: modify driver for new I2C framework   Piotr Wilczek
  • [U-Boot] [PATCH 6/6] WIP: arm: trats: add support for new I2C framework   Piotr Wilczek
  • [U-Boot] [PATCH 6/6] WIP: arm: trats: add support for new I2C framework   Heiko Schocher
  • [U-Boot] [PATCH 6/6] WIP: arm: trats: add support for new I2C framework   Piotr Wilczek
  • [U-Boot] [PATCH v2 0/6] Bring new I2C framwork to Samsung Trats board   Piotr Wilczek
  • [U-Boot] [PATCH v2 2/6] exynos:cpu: Add Exynos4 I2C spacing   Piotr Wilczek
  • [U-Boot] [PATCH v2 4/6] drivers:i2c: Modify I2C driver for Exynos4   Piotr Wilczek
  • [U-Boot] [PATCH v2 5/6] drivers:i2c:s3c24x0: modify driver for new I2C framework   Piotr Wilczek
  • [U-Boot] [PATCH v2 6/6] arm:trats: add support for new I2C framework   Piotr Wilczek
• [U-Boot] [PATCH] OMAP: Tweak omap-common/Makefile since reset.S -> reset.c   Robert P. J. Day
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
  • [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
    • [U-Boot] please pull u-boot-samsung master   Minkyu Kang
      • [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH] Fix handling of some broken test expressions   Domenico Andreoli
• [U-Boot] [SPL mode] Question   Lukasz Majewski
  • [U-Boot] [SPL mode] Question   Andreas Bießmann
    • [U-Boot] [SPL mode] Question   Lukasz Majewski
  • [U-Boot] [SPL mode] Question   Stefano Babic
• [U-Boot] ★ Rodolfo Romão te mandou uma mensagem.   Badoo
  • [U-Boot] [PATCH 1/4] mx5: Align SPI CS naming with i.MX53 reference manual   Fabio Estevam
  • [U-Boot] [PATCH 3/4] spi: mxc_spi: Fix handling of chip select   Fabio Estevam
  • [U-Boot] [PATCH 1/4] mx5: Align SPI CS naming with i.MX53 reference manual   Stefano Babic
  • [U-Boot] [PATCH 2/4] mx5: Print CSPI clock in 'clock' command   Fabio Estevam
  • [U-Boot] [PATCH 2/4] mx5: Print CSPI clock in 'clock' command   Dirk Behme
  • [U-Boot] [PATCH 2/4] mx5: Print CSPI clock in 'clock' command   Fabio Estevam
  • [U-Boot] [PATCH 2/4] mx5: Print CSPI clock in 'clock' command   Stefano Babic
  • [U-Boot] [PATCH 4/4] spi: mxc_spi: Fix spi clock glitch durant reset   Fabio Estevam
  • [U-Boot] [PATCH 4/4] spi: mxc_spi: Fix spi clock glitch durant reset   Stefano Babic
• [U-Boot] [U-Boot, v2] README: Reference nand monitor commands in U-Boot README   Scott Wood
• [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Scott Wood
  • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Scott Wood
      • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Scott Wood
    • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Scott Wood
      • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Scott Wood
      • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Fabio Estevam
      • [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5   Matt Sealey
• [U-Boot] driver/mtd:IFC NAND:Initialise internal SRAM before any write   Scott Wood
• [U-Boot] nand: Extending the nand_ecclayout struct based on Linux 3.5   Scott Wood
  • [U-Boot] nand: Extending the nand_ecclayout struct based on Linux 3.5   Scott Wood
• [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   Scott Wood
  • [U-Boot] [PATCH V2] omap: emif: configure emif only when required   Lokesh Vutla
• [U-Boot] [PATCH v2 6/8] omap_gpmc: BCH8 support (ELM based)   Andreas Bießmann
  • [U-Boot] [PATCH v2 6/8] omap_gpmc: BCH8 support (ELM based)   Peter Korsgaard
    • [U-Boot] [PATCH v2 6/8] omap_gpmc: BCH8 support (ELM based)   Andreas Bießmann
      • [U-Boot] [PATCH v2 6/8] omap_gpmc: BCH8 support (ELM based)   Peter Korsgaard
      • [U-Boot] [PATCH] mx6: clock: Only show CSPI clock if CSPI is enabled   Fabio Estevam
      • [U-Boot] [PATCH] mx6: clock: Only show CSPI clock if CSPI is enabled   Dirk Behme
• [U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX35   Benoît Thébaudeau
  • [U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX35   Stefano Babic
  • [U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX35   Stefano Babic
    • [U-Boot] [RFC, PATCH] omap: Invalidate first page to avoid speculation   Vincent Stehlé
    • [U-Boot] [RFC, PATCH] omap: Invalidate first page to avoid speculation   Albert ARIBAUD
    • [U-Boot] [RFC, PATCH v2] omap: Invalidate first page to avoid speculation   Vincent Stehlé
    • [U-Boot] [PATCH 1/2] ARM: cache: introduce weak arm_setup_identity_mapping   Vincent Stehlé
    • [U-Boot] [PATCH 1/2] ARM: cache: introduce weak arm_setup_identity_mapping   Tom Rini
    • [U-Boot] [PATCH 2/2] ARM: OMAP5: redefine arm_setup_identity_mapping   Vincent Stehlé
    • [U-Boot] [PATCH 2/2] ARM: OMAP5: redefine arm_setup_identity_mapping   Tom Rini
    • [U-Boot] [RFC, PATCH v3] omap: Invalidate first page to avoid speculation   Vincent Stehlé
    • [U-Boot] [PATCH 1/2] ARM: cache: introduce weak arm_setup_identity_mapping   Vincent Stehlé
    • [U-Boot] [PATCH 2/2] ARM: OMAP5: redefine arm_setup_identity_mapping   Vincent Stehlé
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Fabio Estevam
    • [U-Boot] [PATCH 2/8] mx53loco: Configure CONFIG_BOOTDELAY to one second   Fabio Estevam
    • [U-Boot] [PATCH 3/8] mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second   Fabio Estevam
    • [U-Boot] [PATCH 3/8] mx6qsabrelite: Configure CONFIG_BOOTDELAY to one second   Liu Hui-R64343
    • [U-Boot] [PATCH 4/8] mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second   Fabio Estevam
    • [U-Boot] [PATCH 4/8] mx6qsabre_common: Configure CONFIG_BOOTDELAY to one second   Liu Hui-R64343
    • [U-Boot] [PATCH 5/8] mx51evk: Configure CONFIG_BOOTDELAY to one second   Fabio Estevam
    • [U-Boot] [PATCH 6/8] mx25pdk: Configure CONFIG_BOOTDELAY to one second   Fabio Estevam
    • [U-Boot] [PATCH 7/8] mx31pdk: Configure CONFIG_BOOTDELAY to one second   Fabio Estevam
    • [U-Boot] [PATCH 8/8] mx35pdk: Configure CONFIG_BOOTDELAY to one second   Fabio Estevam
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Stefano Babic
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Marek Vasut
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Stefano Babic
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Otavio Salvador
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Marek Vasut
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Otavio Salvador
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Marek Vasut
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Scott Wood
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Marek Vasut
    • [U-Boot] [PATCH 1/8] mx28evk: Configure CONFIG_BOOTDELAY to one second   Scott Wood
• [U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX25   Benoît Thébaudeau
  • [U-Boot] [PATCH] ehci-mxc: Fix host power mask bit for i.MX25   Stefano Babic
  • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
    • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
      • [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
      • [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Simon Glass
      • [U-Boot] [PATCH 01/57] Add architecture-specific global data   Simon Glass
      • [U-Boot] [PATCH 02/57] at91: Move at91 global data into arch_global_data   Simon Glass
      • [U-Boot] [PATCH 03/57] arm: Move timer_rate_hz into arch_global_data   Simon Glass
      • [U-Boot] [PATCH 04/57] arm: Move tbu to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 05/57] arm: Move tbl to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 06/57] arm: Move lastinc to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 07/57] arm: Move timer_reset_value to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 08/57] ixp: Move timestamp to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 08/57] ixp: Move timestamp to arch_global_data   Marek Vasut
      • [U-Boot] [PATCH 09/57] nds32: Drop tlb_addr from global data   Simon Glass
      • [U-Boot] [PATCH 10/57] arm: Move tlb_addr to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 11/57] x86: Move gdt_addr, new_gd_addr to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 12/57] x86: Remove reset_status, relocoff from global_data   Simon Glass
      • [U-Boot] [PATCH 13/57] x86: Move new_gd_addr to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 13/57] x86: Move new_gd_addr to arch_global_data   Graeme Russ
      • [U-Boot] [PATCH 14/57] ppc: Move brg_clk to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 15/57] ppc: Remove extra pci_clk fields from global_data   Simon Glass
      • [U-Boot] [PATCH 16/57] ppc: Move clock fields to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 17/57] ppc: Move mpc83xx clock fields to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 18/57] ppc: Move lbc_clk and cpu to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 19/57] ppc: m68k: Move i2c1_clk, i2c2_clk to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 20/57] ppc: Move CONFIG_QE to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 21/57] ppc: Move used_laws to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 22/57] ppc: Move used_tlb_cams to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 23/57] ppc: Move mpc5xxx clocks to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 24/57] ppc: Move mpc512x clocks to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 25/57] ppc: Move mpc8220 clocks to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 26/57] ppc: Move reset_status to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 27/57] ppc: Move arbiter fields to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 28/57] ppc: Move dp_alloc_base, dp_alloc_top to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 29/57] arm: Move uart_clk to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 30/57] ppc: Move mirror_hack to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 31/57] ppc: Remove console_addr from global data   Simon Glass
      • [U-Boot] [PATCH 32/57] ppc: Move fpga_state to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 33/57] ppc: Move wdt_last to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 34/57] ppc: Move kbd_status to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 35/57] ppc: arm: Move sdhc_clk into arch_global_data   Simon Glass
      • [U-Boot] [PATCH 36/57] sparc: Drop kbd_status and reset_status from global_data   Simon Glass
      • [U-Boot] [PATCH 37/57] m68k: Move CONFIG_EXTRA_CLOCK to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 38/57] mips: Move per_clk and dev_clk to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 39/57] avr32: Move stack_end to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 40/57] avr32: Move cpu_hz to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 41/57] sandbox: Move ram_buf to arch_global_data   Simon Glass
      • [U-Boot] [PATCH 42/57] Add generic global_data   Simon Glass
      • [U-Boot] [PATCH 43/57] Only use fb_base if we have a display   Simon Glass
      • [U-Boot] [PATCH 44/57] arm: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 45/57] avr32: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 46/57] blackfin: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 47/57] m68k: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 48/57] microblaze: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 49/57] mips: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 50/57] nds32: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 51/57] nios2: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 51/57] nios2: Use generic global_data   Thomas Chou
      • [U-Boot] [PATCH 52/57] openrisc: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 53/57] powerpc: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 54/57] sandbox: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 55/57] sh: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 56/57] sparc: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 57/57] x86: Use generic global_data   Simon Glass
      • [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Wolfgang Denk
      • [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Simon Glass
      • [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Simon Glass
• [U-Boot] [PATCH] update .gitignore file   Luka Perkov
  • [U-Boot] [PATCH] update .gitignore file   Albert ARIBAUD
    • [U-Boot] [PATCH] update .gitignore file   Albert ARIBAUD
      • [U-Boot] [PATCH] update .gitignore file   Luka Perkov
      • [U-Boot] [PATCH] update .gitignore file   Albert ARIBAUD
      • [U-Boot] [PATCH] update .gitignore file   Wolfgang Denk
• [U-Boot] [PATCH v2] add include/u-boot.lst to .gitignore   Luka Perkov
• [U-Boot] Moschip ethernet adapter is not seen as ethernet device   valdez valdez
• [U-Boot] [PATCH 0/14] fdt: Add various device tree utilities and features   Jerry Van Baren
  • [U-Boot] [PATCH 0/14] fdt: Add various device tree utilities and features   Simon Glass
• [U-Boot] Custodian branch base commits   Jerry Van Baren
  • [U-Boot] [PATCH] OMAP3 SPI : Fixed bugs related to SPI transfer   Ajoy Kumar Das
  • [U-Boot] [PATCH] OMAP3 SPI : Fixed bugs related to SPI transfer   Peter Korsgaard
  • [U-Boot] [PATCH] OMAP3 SPI : Fixed bugs related to SPI transfer   Ajoy Das
• [U-Boot] Moschip ethernet adapter is not seen as ethernet device   valdez valdez
  • [U-Boot] Moschip ethernet adapter is not seen as ethernet device   valdez valdez
• [U-Boot] sam9x5 can't find Nand flash   alex
  • [U-Boot] sam9x5 can't find Nand flash   Bo Shen
    • [U-Boot] [PATCH 0/5 v2] Add DT based ethernet driver for SMDK5250   Hatim Rv
• [U-Boot] sam9x5 can't find Nand flash   alex
  • [U-Boot] sam9x5 can't find Nand flash   Bo Shen
    • [U-Boot] sam9x5 can't find Nand flash   alex
      • [U-Boot] sam9x5 can't find Nand flash   Andreas Bießmann
      • [U-Boot] sam9x5 can't find Nand flash   Bo Shen
      • [U-Boot] sam9x5 can't find Nand flash   Andreas Bießmann
      • [U-Boot] sam9x5 can't find Nand flash   Andreas Bießmann
      • [U-Boot] sam9x5 can't find Nand flash   Bo Shen
      • [U-Boot] sam9x5 can't find Nand flash   Bo Shen
      • [U-Boot] sam9x5 can't find Nand flash   alex
      • [U-Boot] sam9x5 can't find Nand flash   Bo Shen
• [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment   Yann Vernier
  • [U-Boot] [PATCH] arm: ks8695: more macros for register values   Yann Vernier
  • [U-Boot] [PATCH] arm: ks8695: more macros for register values   Yann Vernier
  • [U-Boot] [PATCH] arm: ks8695: more macros for register values   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Pull request: u-boot-fdt   Jerry Van Baren
  • [U-Boot] Pull request: u-boot-fdt   Tom Rini
• [U-Boot] [PATCH v2 03/10] x86: Allow excluding reset vector code from u-boot   Wolfgang Denk
  • [U-Boot] [PATCH v2 03/10] x86: Allow excluding reset vector code from u-boot   Simon Glass
    • [U-Boot] [PATCH] serial: serial_sh: bugfix: autoboot fails if serial console is not connected   Tetsuyuki Kobayashi
    • [U-Boot] [PATCH] serial: serial_sh: bugfix: autoboot fails if serial console is not connected   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] board/freescale/common/cds_pci_ft.c: Fix rotate wrong cells in interrupt-map property   Jiang Bin
• [U-Boot] analyze/change assembly code   Marek Vasut
  • [U-Boot] analyze/change assembly code   Gerlando Falauto
    • [U-Boot] analyze/change assembly code   Marek Vasut
      • [U-Boot] analyze/change assembly code   Albert ARIBAUD
      • [U-Boot] analyze/change assembly code   Gerlando Falauto
      • [U-Boot] [PATCH] twl4030: fix 'could could' in error messages   Peter Meerwald
• [U-Boot] [PATCH 00/46] Enhance spear support   Vipin Kumar
  • [U-Boot] [PATCH] coldfire: eb_cpu5282: fix: boot from internal flash   Jens Scharsig (BuS Elektronik)
  • [U-Boot] [PATCH v2 1/6] exynos:clock: Add i2c clock   Piotr Wilczek
  • [U-Boot] [PATCH v2 3/6] exynos:pinmux: Add pinmux support for i2c   Piotr Wilczek
• [U-Boot] [PATCH 0/4] EXYNOS5: Add GPIO numbering feature   Rajeshwari Birje
  • [U-Boot] [PATCH 0/8] Adding boottime support   Lee Jones
  • [U-Boot] [PATCH 1/8] u8500: Correct unnecessary mathematical roll-over   Lee Jones
  • [U-Boot] [PATCH 1/8] u8500: Correct unnecessary mathematical roll-over   Wolfgang Denk
  • [U-Boot] [PATCH 1/8] u8500: Correct unnecessary mathematical roll-over   Lee Jones
  • [U-Boot] [PATCH 1/8] u8500: Correct unnecessary mathematical roll-over   Wolfgang Denk
  • [U-Boot] [PATCH 1/8] u8500: Correct unnecessary mathematical roll-over   Lee Jones
  • [U-Boot] [PATCH 2/8] u8500: Add utimer support   Lee Jones
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Lee Jones
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Wolfgang Denk
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Lee Jones
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Wolfgang Denk
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Lee Jones
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Wolfgang Denk
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Lee Jones
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Wolfgang Denk
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Simon Glass
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Lee Jones
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Simon Glass
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Lee Jones
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Wolfgang Denk
  • [U-Boot] [PATCH 3/8] boottime: Add core boottime measurement support   Lee Jones
  • [U-Boot] [PATCH 4/8] boottime: Apply some key boottime tags into common code   Lee Jones
  • [U-Boot] [PATCH 4/8] boottime: Apply some key boottime tags into common code   Wolfgang Denk
  • [U-Boot] [PATCH 4/8] boottime: Apply some key boottime tags into common code   Lee Jones
  • [U-Boot] [PATCH 4/8] boottime: Apply some key boottime tags into common code   Wolfgang Denk
  • [U-Boot] [PATCH 4/8] boottime: Apply some key boottime tags into common code   Lee Jones
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Lee Jones
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Otavio Salvador
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Lee Jones
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Wolfgang Denk
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Lee Jones
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Wolfgang Denk
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Lee Jones
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Wolfgang Denk
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Lee Jones
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Wolfgang Denk
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Lee Jones
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Wolfgang Denk
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Lee Jones
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Wolfgang Denk
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Lee Jones
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Wolfgang Denk
  • [U-Boot] [PATCH 5/8] arm: Add boottime support for the ARM architecture   Lee Jones
  • [U-Boot] [PATCH 6/8] arm: Add some boottime tags into prime booting locations   Lee Jones
  • [U-Boot] [PATCH 7/8] href: Enable boottime functionality   Lee Jones
  • [U-Boot] [PATCH 8/8] snowball: Enable boottime functionality   Lee Jones
  • [U-Boot] [PATCH 0/8] Adding boottime support   Wolfgang Denk
  • [U-Boot] [PATCH 0/8] Adding boottime support   Lee Jones
  • [U-Boot] [PATCH 0/2] arm: rmobile: kzm9g: Adjust initial hardware setting   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Adjust SDRAM setting   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Adjust SDRAM setting   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 2/2] arm: rmobile: kzm9g: Adjust ETM trace clock   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH 2/2] arm: rmobile: kzm9g: Adjust ETM trace clock   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 0/2] [RFC] DEBUG: relocate to fixed address   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH 1/2] DEBUG: fix relocation address   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH 1/2] DEBUG: fix relocation address   Wolfgang Denk
  • [U-Boot] [PATCH 2/2] DEBUG: make u-boot_r which is linked for fixed relocation address   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH 0/2] [RFC] DEBUG: relocate to fixed address   Wolfgang Denk
  • [U-Boot] [PATCH 0/2] [RFC] DEBUG: relocate to fixed address   Scott Wood
  • [U-Boot] [PATCH 0/2] [RFC] DEBUG: relocate to fixed address   Henrik Nordström
  • [U-Boot] [PATCH 0/2] [RFC] DEBUG: relocate to fixed address   Wolfgang Denk
  • [U-Boot] [PATCH 0/2] [RFC] DEBUG: relocate to fixed address   Wolfgang Denk
• [U-Boot] [PATCH v0] davinci: fixed cpu reset   Davide Bonfanti
  • [U-Boot] [PATCH 1/4] Optimized nand_read_buf for kirkwood   Phil Sutter
  • [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Phil Sutter
  • [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Scott Wood
  • [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Phil Sutter
  • [U-Boot] [PATCH 3/4] env_nand.c: do warn only if really no valid environment could be loaded   Phil Sutter
  • [U-Boot] [PATCH 3/4] env_nand.c: do warn only if really no valid environment could be loaded   Scott Wood
  • [U-Boot] [PATCH 3/4] env_nand.c: do warn only if really no valid environment could be loaded   Scott Wood
  • [U-Boot] [PATCH 4/4] common/env_nand.c: calculate crc only when readenv was OK   Phil Sutter
  • [U-Boot] [PATCH 1/4] Optimized nand_read_buf for kirkwood   Prafulla Wadaskar
  • [U-Boot] [PATCH 1/4] Optimized nand_read_buf for kirkwood   Phil Sutter
  • [U-Boot] [PATCH 1/4] Optimized nand_read_buf for kirkwood   Phil Sutter
  • [U-Boot] [PATCH 1/4] Optimized nand_read_buf for kirkwood   Scott Wood
  • [U-Boot] [PATCH] .gitignore: ignore generated u-boot.lst   Vincent Stehlé
  • [U-Boot] [PATCH] .gitignore: ignore generated u-boot.lst   Luka Perkov
  • [U-Boot] [PATCH] .gitignore: ignore generated u-boot.lst   Vincent Stehlé
  • [U-Boot] [PATCH] .gitignore: ignore generated u-boot.lst   Luka Perkov
  • [U-Boot] [PATCH] .gitignore: update path for generated u-boot.lst   Vincent Stehlé
  • [U-Boot] [PATCH] .gitignore: update path for generated u-boot.lst   Luka Perkov
  • [U-Boot] [PATCH] mx28: Fix typo in POWER_MINPWR_VBG_OFF   Marek Vasut
  • [U-Boot] [PATCH] mx28: Fix typo in POWER_MINPWR_VBG_OFF   Stefano Babic
  • [U-Boot] [PATCH] mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET   Marek Vasut
  • [U-Boot] [PATCH] mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSET   Stefano Babic
• [U-Boot] [PATCH v3 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Jaehoon Chung
  • [U-Boot] [PATCH v3 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Fleming Andy-AFLEMING
• [U-Boot] [PATCH] Exynos: clock: support get_mmc_clk for exynos   Jaehoon Chung
• [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   manohar.betham at smartplayin.com
  • [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   Marek Vasut
    • [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   manohar.betham at smartplayin.com
      • [U-Boot] [PATCH 0/4] Support for SATA on EXYNOS5   Vasanth Ananthan
      • [U-Boot] [PATCH 1/4] Exynos5: Add clock support for SATA   Vasanth Ananthan
      • [U-Boot] [PATCH 2/4] Exynos5: Add base addresses for SATA   Vasanth Ananthan
      • [U-Boot] [PATCH 2/4] Exynos5: Add base addresses for SATA   Kyungmin Park
      • [U-Boot] [PATCH 3/4] Drivers: block: Support for SATA in Exynos5   Vasanth Ananthan
      • [U-Boot] [PATCH 4/4] SMDK55250: Enable SATA   Vasanth Ananthan
      • [U-Boot] [PATCH v2 0/23] Various patches in common/   Simon Glass
      • [U-Boot] [PATCH v2 01/23] Add new bootstage step for the main loop   Simon Glass
      • [U-Boot] [PATCH v2 02/23] Add gettime command   Simon Glass
      • [U-Boot] [PATCH v2 03/23] Add a command to read raw blocks from a partition   Simon Glass
      • [U-Boot] [PATCH v2 04/23] Fix use of conditional LMB   Simon Glass
      • [U-Boot] [PATCH v2 05/23] stdio: remove useless strncpy   Simon Glass
      • [U-Boot] [PATCH v2 06/23] Update time command to avoid using get_timer_masked()   Simon Glass
      • [U-Boot] [PATCH v2 07/23] sha1: Use const where possible, and unsigned for input len   Simon Glass
      • [U-Boot] [PATCH v2 08/23] sha256: Use const where possible and add watchdog function   Simon Glass
      • [U-Boot] [PATCH v2 09/23] Add stricmp() and strnicmp()   Simon Glass
      • [U-Boot] [PATCH v2 09/23] Add stricmp() and strnicmp()   Scott Wood
      • [U-Boot] [PATCH v2 10/23] Add generic hash API   Simon Glass
      • [U-Boot] [PATCH v2 11/23] sha1sum: Use generic hash layer   Simon Glass
      • [U-Boot] [PATCH v2 12/23] Add hash command to perform hashing using various algorithms   Simon Glass
      • [U-Boot] [PATCH v2 13/23] edid: Library of EDID decode and print   Simon Glass
      • [U-Boot] [PATCH v2 14/23] edid: Add I2C command for printing the EDID   Simon Glass
      • [U-Boot] [PATCH v2 15/23] fdt: edid: Enable fdt_add_edid() function when CONFIG_LCD defined   Simon Glass
      • [U-Boot] [PATCH v2 16/23] mmc: Fix incorrect handling of 'read' & 'write' commands   Simon Glass
      • [U-Boot] [PATCH v2 17/23] Add console command to access io space registers   Simon Glass
      • [U-Boot] [PATCH v2 18/23] console: Enable function to display console info   Simon Glass
      • [U-Boot] [PATCH v2 19/23] tpm: Add TPM stress test   Simon Glass
      • [U-Boot] [PATCH v2 20/23] Add command to show DRAM configuration   Simon Glass
      • [U-Boot] [PATCH v2 21/23] exynos: Enable hashing functions and EDID for smdk5250   Simon Glass
      • [U-Boot] [PATCH v2 22/23] x86: coreboot: Enable io command   Simon Glass
      • [U-Boot] [PATCH v2 23/23] x86: Add coreboot version to u-boot's version command   Simon Glass
• [U-Boot] fsl mx28evk spi nor probe problem   Sinan Akman
  • [U-Boot] fsl mx28evk spi nor probe problem   Fabio Estevam
    • [U-Boot] fsl mx28evk spi nor probe problem   Sinan Akman
• [U-Boot] Quer on JTAG.   Manukumar
  • [U-Boot] Quer on JTAG.   Wolfgang Denk
• [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   Graeme Russ
  • [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   manohar.betham at smartplayin.com
    • [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   Graeme Russ
      • [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   manohar.betham at smartplayin.com
      • [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   manohar.betham at smartplayin.com
      • [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   manohar.betham at smartplayin.com
      • [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   Graeme Russ
      • [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen   manohar.betham at smartplayin.com
  • [U-Boot] ERROR: CTL:TIMEOUT - USB porting issue for UBoot on S3C2450   rui Yang
    • [U-Boot] [PATCH 1/3] video: tegra: Update line length to match resolution   Thierry Reding
    • [U-Boot] [PATCH 2/3] tegra: Enable LCD on Medcom-Wide   Thierry Reding
    • [U-Boot] [PATCH 2/3] tegra: Enable LCD on Medcom-Wide   Simon Glass
    • [U-Boot] [PATCH 3/3] tegra: Enable LCD on TEC   Thierry Reding
    • [U-Boot] [PATCH 3/3] tegra: Enable LCD on TEC   Simon Glass
    • [U-Boot] [PATCH 1/3] video: tegra: Update line length to match resolution   Simon Glass
    • [U-Boot] [PATCH] Check eth_get_dev() for null on NetLoop entry   Josef Holzmayr
    • [U-Boot] [PATCH 0/6 V3] EXYNOS5: FDT Support for I2C   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/6 V3] EXYNOS5: FDT: Add I2C device node data   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/6 V3] EXYNOS5: FDT: Add I2C device node data   Simon Glass
    • [U-Boot] [PATCH 2/6 V3] EXYNOS5 : FDT: Add Aliases for I2C device   Rajeshwari Shinde
    • [U-Boot] [PATCH 3/6 V3] EXYNOS5: FDT: Add compatible string for I2C   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/6 V3] EXYNOS5: FDT : Decode peripheral id   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/6 V3] EXYNOS5: FDT : Decode peripheral id   Simon Glass
    • [U-Boot] [PATCH 5/6 V3] I2C: Driver changes for FDT support   Rajeshwari Shinde
    • [U-Boot] [PATCH 5/6 V3] I2C: Driver changes for FDT support   Simon Glass
    • [U-Boot] [PATCH 6/6 V3] SMDK5250: Initialise I2C using FDT   Rajeshwari Shinde
    • [U-Boot] [PATCH v2 0/4] Support for SATA on EXYNOS5   Vasanth Ananthan
    • [U-Boot] [PATCH v2 1/4] Exynos5: Add clock support for SATA   Vasanth Ananthan
    • [U-Boot] [PATCH v2 2/4] Exynos5: Add base addresses for SATA   Vasanth Ananthan
    • [U-Boot] [PATCH v2 3/4] Drivers: block: Support for SATA in Exynos5   Vasanth Ananthan
    • [U-Boot] [PATCH v2 3/4] Drivers: block: Support for SATA in Exynos5   Luka Perkov
    • [U-Boot] [PATCH v2 4/4] SMDK55250: Enable SATA   Vasanth Ananthan
    • [U-Boot] [RFC/PATCH 0/4] BCH8 support for OMAP3   Andreas Bießmann
    • [U-Boot] [RFC/PATCH 1/4] omap3/cpu.h: add BCH support   Andreas Bießmann
    • [U-Boot] [RFC/PATCH 2/4] omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel   Andreas Bießmann
    • [U-Boot] [RFC/PATCH 3/4] omap_gpmc: add support for hw assisted BCH8   Andreas Bießmann
    • [U-Boot] [RFC/PATCH 3/4] omap_gpmc: add support for hw assisted BCH8   Scott Wood
    • [U-Boot] [RFC/PATCH 4/4] tricorder: enable hw assisted BCH8 in SPL and u-boot   Andreas Bießmann
    • [U-Boot] [PATCH 1/2] OMAP3: fix panel timing on the mt_ventoux board   Stefano Babic
    • [U-Boot] [PATCH 2/2] OMAP3: TAM3517: add macros for reading eeprom   Stefano Babic
    • [U-Boot] [PATCH v4 2/3] OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define   Stefano Babic
    • [U-Boot] [PATCH v4 3/3] SPL: Change description for spl command   Stefano Babic
• [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation   Angelo Dureghello
• [U-Boot] [PATCH] MAINTAINERS: Add a pointer to the custodians page.   Robert P. J. Day
  • [U-Boot] [Patch 1/2] MIPS: fix a latent bug on initialize $gp   Zhi-zhou Zhang
  • [U-Boot] [Patch 2/2] MIPS: do not modify variable before relocate_code   Zhi-zhou Zhang
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
  • [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
  • [U-Boot] MX6 solo support   Fabio Estevam
    • [U-Boot] MX6 solo support   Eric Nelson
      • [U-Boot] [PATCH] mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers   Marek Vasut
      • [U-Boot] [PATCH] mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers   Otavio Salvador
      • [U-Boot] [PATCH] mx28: Rename regs-power.h to regs-power-mx28.h   Marek Vasut
      • [U-Boot] [PATCH] mx28: Rename regs-power.h to regs-power-mx28.h   Otavio Salvador
      • [U-Boot] [PATCH] mx28: Rename regs-power.h to regs-power-mx28.h   Marek Vasut
      • [U-Boot] [PATCH] mx23: Add POWER and CLKCTRL register definitions   Marek Vasut
      • [U-Boot] [PATCH] mx23: Add POWER and CLKCTRL register definitions   Otavio Salvador
      • [U-Boot] [PATCH] mx23: Add POWER and CLKCTRL register definitions   Marek Vasut
      • [U-Boot] [PATCH] mx23: Add POWER and CLKCTRL register definitions   Otavio Salvador
      • [U-Boot] [PATCH] mx23: Add POWER and CLKCTRL register definitions   Marek Vasut
      • [U-Boot] [PATCH] mx23: Add POWER and CLKCTRL register definitions   Otavio Salvador
      • [U-Boot] [PATCH] mx23: Add POWER and CLKCTRL register definitions   Marek Vasut
• [U-Boot] [PATCH] ARM v7: Flush icache when executing a program with go   Henrik Nordström
  • [U-Boot] [PATCH] ARM v7: Flush icache when executing a program with go   Wolfgang Denk
    • [U-Boot] [PATCH] ARM v7: Flush icache when executing a program with go   Henrik Nordström
• [U-Boot] [PATCH 0/2] Makefile mkconfig: Ease board name maintenance on shared boards   Henrik Nordström
  • [U-Boot] [PATCH 0/2] Makefile mkconfig: Ease board name maintenance on shared boards   Tom Rini
  • [U-Boot] [PATCH 0/2] Makefile mkconfig: Ease board name maintenance on shared boards   Henrik Nordström
• [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Henrik Nordström
  • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Henrik Nordström
      • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Henrik Nordström
      • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Tom Rini
      • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Henrik Nordström
      • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Tom Rini
      • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Henrik Nordström
      • [U-Boot] [PATCH 1/2] mkconfig: Make CONFIG_SYS_BOARD_NAME default to the configured target name   Tom Rini
• [U-Boot] [PATCH 2/2] Makefile: Accept target names in all lower case to ease matching   Henrik Nordström
  • [U-Boot] [PATCH 2/2] Makefile: Accept target names in all lower case to ease matching   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] Makefile: Accept target names in all lower case to ease matching   Henrik Nordström
      • [U-Boot] [PATCH 2/2] Makefile: Accept target names in all lower case to ease matching   Wolfgang Denk
      • [U-Boot] [PATCH 2/2] Makefile: Accept target names in all lower case to ease matching   Henrik Nordström
• [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Henrik Nordström
  • [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Luka Perkov
  • [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Henrik Nordström
  • [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Luka Perkov
  • [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Henrik Nordström
  • [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Marek Vasut
  • [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Henrik Nordström
  • [U-Boot] mksunxiboot tool & SPL parameters   Henrik Nordström
  • [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Wolfgang Denk
    • [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Graeme Russ
      • [U-Boot] [PATCH 00/22] ARM: Allwinner sunXi (A10 & A13) SoC support   Henrik Nordström
• [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Henrik Nordström
  • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Luka Perkov
  • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Henrik Nordström
  • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Wolfgang Denk
  • [U-Boot] [PATCH 01/22] Re: Copyright on board makefiles.   Henrik Nordström
  • [U-Boot] [PATCH 01/22] Re: Copyright on board makefiles.   Wolfgang Denk
  • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Wolfgang Denk
  • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Marek Vasut
    • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Henrik Nordström
      • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Marek Vasut
      • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Wolfgang Denk
  • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Wolfgang Denk
    • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Henrik Nordström
      • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Stefan Roese
  • [U-Boot] [PATCH 01/22] ARM: sunxi: Basic Allwinner A10/A13 (sun4i/sun5i) support   Wolfgang Denk
• [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver   Henrik Nordström
  • [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver   Luka Perkov
  • [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver   Henrik Nordström
  • [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver   Luka Perkov
  • [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver   Wolfgang Denk
  • [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver   Wolfgang Denk
  • [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver   Marek Vasut
  • [U-Boot] [PATCH 02/22] ARM: sunxi: MMC driver   Wolfgang Denk
• [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver   Henrik Nordström
  • [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver   Luka Perkov
  • [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver   Henrik Nordström
  • [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver   Marek Vasut
  • [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver   Wolfgang Denk
  • [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver   Heiko Schocher
    • [U-Boot] [PATCH 03/22] ARM sunxi: I2C driver   Henrik Nordström
• [U-Boot] [PATCH 05/22] power: Add AXP209 Power Management controller (I2C)   Henrik Nordström
  • [U-Boot] [PATCH 05/22] power: Add AXP209 Power Management controller (I2C)   Luka Perkov
  • [U-Boot] [PATCH 05/22] power: Add AXP209 Power Management controller (I2C)   Marek Vasut
  • [U-Boot] [PATCH 05/22] power: Add AXP209 Power Management controller (I2C)   Wolfgang Denk
• [U-Boot] [PATCH 06/22] ARM sunxi: Basic GPIO driver   Henrik Nordström
  • [U-Boot] [PATCH 06/22] ARM sunxi: Basic GPIO driver   Luka Perkov
  • [U-Boot] [PATCH 06/22] ARM sunxi: Basic GPIO driver   Marek Vasut
  • [U-Boot] [PATCH 06/22] ARM sunxi: Basic GPIO driver   Wolfgang Denk
    • [U-Boot] [PATCH 06/22] ARM sunxi: Basic GPIO driver   Marek Vasut
    • [U-Boot] [PATCH 06/22] ARM sunxi: Basic GPIO driver   Henrik Nordström
• [U-Boot] [PATCH 07/22] tools: mksunixboot adding a Allwinner boot header   Henrik Nordström
  • [U-Boot] [PATCH 07/22] tools: mksunixboot adding a Allwinner boot header   Luka Perkov
  • [U-Boot] [PATCH 07/22] tools: mksunixboot adding a Allwinner boot header   Wolfgang Denk
• [U-Boot] [PATCH 08/22] net: Add sunxi (Allwinner) wemac driver   Henrik Nordström
• [U-Boot] [PATCH 09/22] ARM: sun4i: Enable ethernet support (wemac) on A10 boards   Henrik Nordström
  • [U-Boot] [PATCH 09/22] ARM: sun4i: Enable ethernet support (wemac) on A10 boards   Luka Perkov
• [U-Boot] [PATCH 10/22] sunxi: Add more network commands and netconsole support   Henrik Nordström
  • [U-Boot] [PATCH 10/22] sunxi: Add more network commands and netconsole support   Luka Perkov
• [U-Boot] [PATCH 11/22] ARM: sunxi: U-Boot SPL capable of booting directly from MMC   Henrik Nordström
  • [U-Boot] [PATCH 11/22] ARM: sunxi: U-Boot SPL capable of booting directly from MMC   Luka Perkov
• [U-Boot] [PATCH 12/22] ARM sunxi: SPL support for Olimex A13-OLinuXino board   Henrik Nordström
  • [U-Boot] [PATCH 12/22] ARM sunxi: SPL support for Olimex A13-OLinuXino board   Luka Perkov
• [U-Boot] [PATCH 13/22] ARM sunxi: SPL support for Mele A1000 board   Henrik Nordström
• [U-Boot] [PATCH 14/22] ARM sunxi: SPL support for Cubieboard board   Henrik Nordström
• [U-Boot] [PATCH 15/22] ARM sunxi: SPL support for Hackberry 1GB board   Henrik Nordström
• [U-Boot] [PATCH 16/22] ARM sunxi: SPL support for a13_mid board   Henrik Nordström
• [U-Boot] [PATCH 17/22] ARM sunxi: SPL support for Mini-X board   Henrik Nordström
• [U-Boot] [PATCH 18/22] ARM sunxi: SPL support for hyundai A7HD board   Henrik Nordström
• [U-Boot] [PATCH 19/22] ARM sunxi: SPL support for MK802 board   Henrik Nordström
• [U-Boot] [PATCH 20/22] ARM sunxi: SPL support for Rikomagic MK802II board   Henrik Nordström
• [U-Boot] [PATCH 21/22] ARM sunxi: SPL support for Mele A3700 board   Henrik Nordström
• [U-Boot] [PATCH 22/22] ARM sunxi: SPL support for Olinuxino A13 Micro   Henrik Nordström
• [U-Boot] [PATCH 04/22] ARM: sunxi: watchdog support   Henrik Nordström
• [U-Boot] [Patch 1/2] MIPS: fix a latent bug on initialize $gp   Daniel Schwierzeck
  • [U-Boot] [Patch 1/2] MIPS: fix a latent bug on initialize $gp   Zhi-zhou Zhang
    • [U-Boot] [Patch 1/2] MIPS: fix a latent bug on initialize $gp   Daniel Schwierzeck
      • [U-Boot] [Patch 1/2] MIPS: fix a latent bug on initialize $gp   Zhi-zhou Zhang
  • [U-Boot] [Patch 2/2] MIPS: do not modify variable before relocate_code   Daniel Schwierzeck
• [U-Boot] [PATCH 1/2] tegra: display: add board pinmux   Marc Dietrich
  • [U-Boot] [PATCH 2/2] tegra: enable LCD on PAZ00   Marc Dietrich
    • [U-Boot] [PATCH 2/2] tegra: enable LCD on PAZ00   Stephen Warren
      • [U-Boot] [PATCH 2/2] tegra: enable LCD on PAZ00   Marc Dietrich
      • [U-Boot] [PATCH 2/2] tegra: enable LCD on PAZ00   Tom Warren
      • [U-Boot] [PATCH 2/2] tegra: enable LCD on PAZ00   Stephen Warren
      • [U-Boot] [PATCH 2/2] tegra: enable LCD on PAZ00   Stephen Warren
      • [U-Boot] [PATCH 2/2] tegra: enable LCD on PAZ00   Marek Vasut
      • [U-Boot] [PATCH 1/2] tegra: display: add board pinmux   Tom Warren
      • [U-Boot] [PATCH 1/2] tegra: display: add board pinmux   Marc Dietrich
      • [U-Boot] [PATCH] fsl/sata: remove read only bit writing in host control register   Roy Zang
      • [U-Boot] [PATCH v4 2/9] x86: Allow excluding reset vector code from u-boot   Simon Glass
      • [U-Boot] [PATCH v4 8/9] x86: Remove coreboot start16 code   Simon Glass
      • [U-Boot] [PATCH v4 9/9] x86: coreboot: Enable LPC TPM   Simon Glass
      • [U-Boot] [PATCH v4 9/9] x86: coreboot: Enable LPC TPM   Marek Vasut
      • [U-Boot] [PATCH v4 2/9] x86: Allow excluding reset vector code from u-boot   Wolfgang Denk
      • [U-Boot] [PATCH v4 2/9] x86: Allow excluding reset vector code from u-boot   Simon Glass
      • [U-Boot] [PATCH v4 2/9] x86: Allow excluding reset vector code from u-boot   Wolfgang Denk
• [U-Boot] u-boot-atmel and u-boot-at91   alex
  • [U-Boot] u-boot-atmel and u-boot-at91   Andreas Bießmann
    • [U-Boot] u-boot-atmel and u-boot-at91   Andreas Bießmann
      • [U-Boot] [PATCH v2] powerpc/corenet_ds: move SATA config to board configuration   Roy Zang
      • [U-Boot] [PATCH] am335x: disable internal delay for RGMII mode   yegorslists at googlemail.com
      • [U-Boot] [PATCH] am335x: cpsw: make phy address configurable   yegorslists at googlemail.com
  • [PATCH] phy: export genphy_parse_link()   Yegor Yefremov
  • [U-Boot] [RFC] export genphy_parse_link()   Yegor Yefremov
    • [U-Boot] [RFC] export genphy_parse_link()   Marek Vasut
      • [U-Boot] [RFC] export genphy_parse_link()   Yegor Yefremov
      • [U-Boot] [RFC] export genphy_parse_link()   Yegor Yefremov
• [U-Boot] [PATCH 3/5] Add fuse API and commands   Benoît Thébaudeau
  • [U-Boot] [PATCH 3/5] Add fuse API and commands   Dirk Behme
    • [U-Boot] [PATCH 3/5] Add fuse API and commands   Eric Nelson
      • [U-Boot] [PATCH 3/5] Add fuse API and commands   Benoît Thébaudeau
      • [U-Boot] [PATCH 3/5] Add fuse API and commands   Eric Nelson
      • [U-Boot] [PATCH 3/5] Add fuse API and commands   Benoît Thébaudeau
      • [U-Boot] [PATCH 3/5] Add fuse API and commands   Eric Nelson
      • [U-Boot] [PATCH 0/4] fs:ext4:fix: Fixes for ext4write command   Lukasz Majewski
      • [U-Boot] [PATCH 1/4] fs:ext4:write: Add lldiv and do_div to perform 64-32 bits division   Lukasz Majewski
      • [U-Boot] [PATCH 2/4] fs:ext4:write: Store block device descriptor in file system structure   Lukasz Majewski
      • [U-Boot] [PATCH 3/4] fs:ext4:fix: Code refactoring to suppress compiler warnings   Lukasz Majewski
      • [U-Boot] [PATCH 4/4] arm:trats: Adjust Samsung's TRATS config file   Lukasz Majewski
• [U-Boot] [PATCH 2/4] apf27: add support for the armadeus APF27 board   Albert ARIBAUD
• [U-Boot] [PATCH 3/4] apf27: add spl support for the apf27   Albert ARIBAUD
  • [U-Boot] [PATCH v5 2/9] x86: Allow excluding reset vector code from u-boot   Simon Glass
  • [U-Boot] [PATCH v5 8/9] x86: Remove coreboot start16 code   Simon Glass
  • [U-Boot] [PATCH v5 2/9] x86: Allow excluding reset vector code from u-boot   Wolfgang Denk
  • [U-Boot] [PATCH v5 2/9] x86: Allow excluding reset vector code from u-boot   Simon Glass
  • [U-Boot] [PATCH v5 2/9] x86: Allow excluding reset vector code from u-boot   Graeme Russ
  • [U-Boot] [PATCH v5 2/9] x86: Allow excluding reset vector code from u-boot   Wolfgang Denk
  • [U-Boot] [PATCH v5 2/9] x86: Allow excluding reset vector code from u-boot   Simon Glass
  • [U-Boot] [PATCH v5 2/9] x86: Allow excluding reset vector code from u-boot   Wolfgang Denk
  • [U-Boot] [PATCH v2 03/22] powerpc/mpc85xx: move debug tlb entry after TLB is in known state   Andy Fleming
• [U-Boot] Pull request: nand flash   Scott Wood
  • [U-Boot] Pull request: nand flash   Tom Rini
  • [U-Boot] [PATCH 1/2] patman: Add spaces back into patman test   Doug Anderson
  • [U-Boot] [PATCH 1/2] patman: Add spaces back into patman test   Simon Glass
  • [U-Boot] [PATCH 2/2] patman: Allow tests to run even if patman is in the path   Doug Anderson
  • [U-Boot] [PATCH 2/2] patman: Allow tests to run even if patman is in the path   Simon Glass
  • [U-Boot] [PATCH] patman: Look for checkpatch in the scripts directory   Doug Anderson
  • [U-Boot] [PATCH] patman: Look for checkpatch in the scripts directory   Simon Glass
  • [U-Boot] U-Boot for MIPS AR7161   Drassal, Allan
    • [U-Boot] U-Boot for MIPS AR7161   Daniel Schwierzeck
      • [U-Boot] U-Boot for MIPS AR7161   Drassal, Allan
      • [U-Boot] [PATCH V4 1/7] ARM: bcm2835: add mailbox driver   Stephen Warren
      • [U-Boot] [PATCH V4 2/7] ARM: rpi_b: use bcm2835 mbox driver to get memory size   Stephen Warren
      • [U-Boot] [PATCH V4 4/7] ARM: rpi_b: disable rpi_b dcache explicitly   Stephen Warren
      • [U-Boot] [PATCH V4 5/7] video: add a driver for the bcm2835   Stephen Warren
      • [U-Boot] [PATCH V4 6/7] mmc: add bcm2835 driver   Stephen Warren
      • [U-Boot] [PATCH V4 6/7] mmc: add bcm2835 driver   Albert ARIBAUD
      • [U-Boot] [PATCH V4 6/7] mmc: add bcm2835 driver   Stephen Warren
      • [U-Boot] [PATCH V4 6/7] mmc: add bcm2835 driver   Albert ARIBAUD
      • [U-Boot] [PATCH V4 6/7] mmc: add bcm2835 driver   Andy Fleming
      • [U-Boot] [PATCH V4 7/7] ARM: rpi_b: enable SD controller, add related env/cmds   Stephen Warren
      • [U-Boot] [PATCH V4 3/7] lcd: calculate line_length after lcd_ctrl_init()   Stephen Warren
      • [U-Boot] [PATCH] gpio: remove duplicate function signature   Nikita Kiryanov
      • [U-Boot] [PATCH] gpio: add gpio_is_valid() to omap_gpio API   Nikita Kiryanov
      • [U-Boot] [PATCH V2] gpio: add gpio_is_valid() to omap_gpio API   Nikita Kiryanov
      • [U-Boot] [PATCH] powerpc/p4080ds: fix PCI-e x8 link training down failure   Yuanquan Chen
• [U-Boot] Reg Bootstrapping on x86-64 for tizen   manohar.betham at smartplayin.com
  • [U-Boot] Reg Bootstrapping on x86-64 for tizen   Wolfgang Denk
    • [U-Boot] Reg Bootstrapping on x86-64 for tizen   Simon Glass
      • [U-Boot] Reg Bootstrapping on x86-64 for tizen   manohar.betham at smartplayin.com
• [U-Boot] RFD: ARM: enable HYP mode on OMAP5   Ian Molton
• [U-Boot] [PATCH v2 1/5] imx iim: Homogenize and fix register definitions   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 2/5] imx iim: Add useful fuse definitions   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 3/5] Add fuse API and commands   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 4/5] Add fsl_iim driver   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 5/5] mpc iim: Switch to common fsl_iim   Benoît Thébaudeau
• [U-Boot] [PATCH v2 3/5] Add fuse API and commands   Benoît Thébaudeau
• [U-Boot] [PATCH v5 00/11] S3C24XX: Add support to MINI2416 board   José Miguel Gonçalves
  • [U-Boot] [PATCH v5 00/11] S3C24XX: Add support to MINI2416 board   Scott Wood
  • [U-Boot] [PATCH v5 00/11] S3C24XX: Add support to MINI2416 board   Marek Vasut
• [U-Boot] arm: empty isb() in set_cr   Joe Kulikauskas
  • [U-Boot] [PATCH 0/4] enable USB OHCI on sam9x5ek boards   Richard Genoud
  • [U-Boot] [PATCH 1/4] usb documentation: fix typo   Richard Genoud
  • [U-Boot] [PATCH 2/4] ARM: at91sam9x5: enable USB OHCI support for 9x5ek board.   Richard Genoud
  • [U-Boot] [PATCH 3/4] at91sam9x5ek: regroup FAT/DOS features   Richard Genoud
  • [U-Boot] [PATCH 4/4] at91sam9x5ek: add USB OHCI configuration   Richard Genoud
  • [U-Boot] [PATCH 0/4] enable USB OHCI on sam9x5ek boards   Bo Shen
  • [U-Boot] [PATCH 0/4] enable USB OHCI on sam9x5ek boards   Richard Genoud
• [U-Boot] [PATCH 1/2 v2] tegra: display: add board pinmux   Marc Dietrich
  • [U-Boot] [PATCH 2/2 v2] tegra: enable LCD on PAZ00   Marc Dietrich
    • [U-Boot] [PATCH 2/2 v2] tegra: enable LCD on PAZ00   Tom Warren
    • [U-Boot] [PATCH] Remove unused CONFIG_PHYS_SDRAM_1_SIZE   Thomas Weber
    • [U-Boot] [RFC/PATCHv2] OMAP3: Remove unused PHYS_SDRAM_1_SIZE   Thomas Weber
  • [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
    • [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
    • [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
    • [U-Boot] [PATCH 2/2] mmc: Split device init to decouple OCR-polling delay   Andy Fleming
      • [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
      • [U-Boot] Please pull u-boot-mmc.git   Tom Rini
  • [U-Boot] [PATCH 0/5] Various x86 patches   Simon Glass
• [U-Boot] [PATCH 4/5] x86: Remove duplicate PCI init   Simon Glass
  • [U-Boot] [PATCH 3/5] x86: Put global data on the stack   Simon Glass
• [U-Boot] [PATCH 2/5] x86: Forward declate gd_t   Simon Glass
  • [U-Boot] [PATCH 2/5] x86: Forward declate gd_t   Marek Vasut
    • [U-Boot] [PATCH 2/5] x86: Forward declate gd_t   Simon Glass
      • [U-Boot] [PATCH 2/5] x86: Forward declate gd_t   Marek Vasut
      • [U-Boot] [PATCH 2/5] x86: Forward declate gd_t   Graeme Russ
      • [U-Boot] [PATCH 2/5] x86: Forward declate gd_t   Marek Vasut
      • [U-Boot] [PATCH V4 00/11] imximage series   Troy Kisky
      • [U-Boot] [PATCH V4 06/11] imximage: move set_imx_hdr to struct data_src   Troy Kisky
      • [U-Boot] [PATCH V4 06/11] imximage: move set_imx_hdr to struct data_src   Liu Hui-R64343
      • [U-Boot] [PATCH V4 10/11] imximage: use parse_helper functions   Troy Kisky
      • [U-Boot] [PATCH V4 10/11] imximage: use parse_helper functions   Liu Hui-R64343
      • [U-Boot] [PATCH V4 00/11] imximage series   Wolfgang Denk
      • [U-Boot] [PATCH V4 00/11] imximage series   Troy Kisky
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Troy Kisky
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Wolfgang Denk
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Troy Kisky
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Wolfgang Denk
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Troy Kisky
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Wolfgang Denk
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Troy Kisky
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Wolfgang Denk
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Troy Kisky
      • [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Liu Hui-R64343
      • [U-Boot] [PATCH V4 02/11] imximage: make header variable length   Troy Kisky
      • [U-Boot] [PATCH V4 02/11] imximage: make header variable length   Liu Hui-R64343
      • [U-Boot] [PATCH V4 03/11] imximage: remove static imximage_version   Troy Kisky
      • [U-Boot] [PATCH V4 03/11] imximage: remove static imximage_version   Liu Hui-R64343
      • [U-Boot] [PATCH V4 04/11] imximage: prepare to move static variables to struct data_src   Troy Kisky
      • [U-Boot] [PATCH V4 04/11] imximage: prepare to move static variables to struct data_src   Wolfgang Denk
      • [U-Boot] [PATCH V4 04/11] imximage: prepare to move static variables to struct data_src   Troy Kisky
      • [U-Boot] [PATCH V4 04/11] imximage: prepare to move static variables to struct data_src   Wolfgang Denk
      • [U-Boot] [PATCH V4 05/11] imximage: change parameters for set_dcd_val/set_imx_hdr   Troy Kisky
      • [U-Boot] [PATCH V4 05/11] imximage: change parameters for set_dcd_val/set_imx_hdr   Liu Hui-R64343
      • [U-Boot] [PATCH V4 07/11] imximage: move set_dcd_val to struct data_src   Troy Kisky
      • [U-Boot] [PATCH V4 07/11] imximage: move set_dcd_val to struct data_src   Liu Hui-R64343
      • [U-Boot] [PATCH V4 08/11] imximage: enable word writes for version2 header   Troy Kisky
      • [U-Boot] [PATCH V4 08/11] imximage: enable word writes for version2 header   Wolfgang Denk
      • [U-Boot] [PATCH V4 08/11] imximage: enable word writes for version2 header   Troy Kisky
      • [U-Boot] [PATCH V4 08/11] imximage: enable word writes for version2 header   Liu Hui-R64343
      • [U-Boot] [PATCH V4 09/11] tools: add parse_helper file   Troy Kisky
      • [U-Boot] [PATCH V4 09/11] tools: add parse_helper file   Wolfgang Denk
      • [U-Boot] [PATCH V4 09/11] tools: add parse_helper file   Liu Hui-R64343
      • [U-Boot] [PATCH V4 11/11] parse_helper: add expression evaluation   Troy Kisky
      • [U-Boot] [PATCH V4 11/11] parse_helper: add expression evaluation   Liu Hui-R64343
  • [U-Boot] [PATCH 5/5] x86: Add ilog2 to bitops   Simon Glass
  • [U-Boot] [PATCH 1/5] x86: Fix compilation on 64-built built machines   Simon Glass
    • [U-Boot] [PATCH 1/5] x86: Fix compilation on 64-bit build machines   Simon Glass
    • [U-Boot] [PATCH 1/5] x86: Fix compilation on 64-bit build machines   Simon Glass
    • [U-Boot] [PATCH 1/5] x86: Fix compilation on 64-bit build machines   Graeme Russ
    • [U-Boot] [PATCH 1/5] x86: Fix compilation on 64-bit build machines   Graeme Russ
    • [U-Boot] [PATCH 2/5] x86: Forward declare gd_t   Simon Glass
    • [U-Boot] [PATCH 2/5] x86: Forward declare gd_t   Graeme Russ
    • [U-Boot] [PATCH 2/5] x86: Forward declare gd_t   Simon Glass
    • [U-Boot] [PATCH 3/5] x86: Put global data on the stack   Simon Glass
    • [U-Boot] [PATCH 4/5] x86: Remove duplicate PCI init   Simon Glass
    • [U-Boot] [PATCH 5/5] x86: Add ilog2 to bitops   Simon Glass
• [U-Boot] Older x86 patches   Simon Glass
  • [U-Boot] Older x86 patches   Graeme Russ
    • [U-Boot] Older x86 patches   Simon Glass
    • [U-Boot] [PATCH V5 1/2] mmc: add bcm2835 driver   Stephen Warren
    • [U-Boot] [PATCH V5 1/2] mmc: add bcm2835 driver   Andy Fleming
    • [U-Boot] [PATCH V5 2/2] ARM: rpi_b: enable SD controller, add related env/cmds   Stephen Warren
    • [U-Boot] [PATCH 0/7 V2] EXYNOS5: FDT support for Sound   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/7 V2] FDT: Declare API in header file.   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/7 V2] FDT: Declare API in header file.   Simon Glass
    • [U-Boot] [PATCH 2/7 V2] EXYNOS5: FDT: Add sound device node data   Rajeshwari Shinde
    • [U-Boot] [PATCH 2/7 V2] EXYNOS5: FDT: Add sound device node data   Simon Glass
    • [U-Boot] [PATCH 3/7 V2] EXYNOS5: FDT: Add sound and codec device node   Rajeshwari Shinde
    • [U-Boot] [PATCH 3/7 V2] EXYNOS5: FDT: Add sound and codec device node   Simon Glass
    • [U-Boot] [PATCH 4/7 V2] EXYNOS5: FDT: Add compatible strings for sound   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/7 V2] EXYNOS5: FDT: Add compatible strings for sound   Simon Glass
    • [U-Boot] [PATCH 5/7 V2] Sound: Add FDT support to driver   Rajeshwari Shinde
    • [U-Boot] [PATCH 5/7 V2] Sound: Add FDT support to driver   Simon Glass
    • [U-Boot] [PATCH 6/7 V2] Sound: WM8994: Add FDT support to codec   Rajeshwari Shinde
    • [U-Boot] [PATCH 6/7 V2] Sound: WM8994: Add FDT support to codec   Simon Glass
    • [U-Boot] [PATCH 7/7 V2] Sound: Add FDT support to CMD.   Rajeshwari Shinde
    • [U-Boot] [PATCH 7/7 V2] Sound: Add FDT support to CMD.   Simon Glass
    • [U-Boot] [PATCH v6 2/9] x86: Allow excluding reset vector code from u-boot   Simon Glass
    • [U-Boot] [PATCH v6 8/9] x86: Remove coreboot start16 code   Simon Glass
    • [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
    • [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
    • [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
    • [U-Boot] Please pull u-boot-mpc85xx.git   Tom Rini
    • [U-Boot] [PATCH 1/2] cfi_flash: Add manufact_match helper function   Stefan Roese
    • [U-Boot] [PATCH 2/2] cfi_flash: Read PPB sector protection from device for AMD/Spansion chips   Stefan Roese
    • [U-Boot] [PATCH 1/2] phy: export genphy_parse_link()   yegorslists at googlemail.com
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   yegorslists at googlemail.com
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Marek Vasut
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Yegor Yefremov
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Marek Vasut
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Henrik Nordström
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Yegor Yefremov
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Marek Vasut
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Yegor Yefremov
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Marek Vasut
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Yegor Yefremov
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Marek Vasut
    • [U-Boot] [PATCH 2/2] net: add ICPlus PHY driver   Yegor Yefremov
    • [U-Boot] [PATCHv2 0/4]enable USB OHCI on sam9x5ek boards   Richard Genoud
    • [U-Boot] [PATCHv2 1/4] usb documentation: fix typo   Richard Genoud
    • [U-Boot] [PATCHv2 2/4] at91sam9x5: enable USB support for 9x5ek board.   Richard Genoud
    • [U-Boot] [PATCHv2 2/4] at91sam9x5: enable USB support for 9x5ek board.   Bo Shen
    • [U-Boot] [PATCHv2 2/4] at91sam9x5: enable USB support for 9x5ek board.   Richard Genoud
    • [U-Boot] [PATCHv2 3/4] at91sam9x5ek: regroup FAT/DOS features   Richard Genoud
    • [U-Boot] [PATCHv2 4/4] at91sam9x5ek: add USB configuration   Richard Genoud
    • [U-Boot] [PATCHv2 4/4] at91sam9x5ek: add USB configuration   Bo Shen
    • [U-Boot] [PATCH 0/9] DFU on am35xx_evm (against u-boot-usb)   Pantelis Antoniou
    • [U-Boot] [PATCH 1/9] Remove obsolete header file   Pantelis Antoniou
    • [U-Boot] [PATCH 1/9] Remove obsolete header file   Tom Rini
    • [U-Boot] [PATCH 1/9] Remove obsolete header file   Marek Vasut
    • [U-Boot] [PATCH 1/9] Remove obsolete header file   Tom Rini
    • [U-Boot] [PATCH 2/9] Fix bug when both DFU & ETHER are defined   Pantelis Antoniou
    • [U-Boot] [PATCH 2/9] Fix bug when both DFU & ETHER are defined   Marek Vasut
    • [U-Boot] [PATCH 2/9] Fix bug when both DFU & ETHER are defined   Pantelis Antoniou
    • [U-Boot] [PATCH 2/9] Fix bug when both DFU & ETHER are defined   Marek Vasut
    • [U-Boot] [PATCH 4/9] Fix crash when wrong number of arguments given   Pantelis Antoniou
    • [U-Boot] [PATCH 5/9] Generate appropriate responses for DFU   Pantelis Antoniou
    • [U-Boot] [PATCH 5/9] Generate appropriate responses for DFU   Marek Vasut
    • [U-Boot] [PATCH 5/9] Generate appropriate responses for DFU   Pantelis Antoniou
    • [U-Boot] [PATCH 7/9] Add a partition type target   Pantelis Antoniou
    • [U-Boot] [PATCH 7/9] Add a partition type target   Marek Vasut
    • [U-Boot] [PATCH 7/9] Add a partition type target   Pantelis Antoniou
    • [U-Boot] [PATCH 7/9] Add a partition type target   Marek Vasut
    • [U-Boot] [PATCH 8/9] Issue connect/disconnect as appropriate   Pantelis Antoniou
    • [U-Boot] [PATCH 8/9] Issue connect/disconnect as appropriate   Marek Vasut
    • [U-Boot] [PATCH 8/9] Issue connect/disconnect as appropriate   Tom Rini
    • [U-Boot] [PATCH 9/9] Add DFU config   Pantelis Antoniou
    • [U-Boot] [PATCH 9/9] Add DFU config   Marek Vasut
    • [U-Boot] [PATCH 9/9] Add DFU config   Tom Rini
    • [U-Boot] [PATCH 9/9] Add DFU config   Pantelis Antoniou
    • [U-Boot] [PATCH 3/9] Only perform DFU board_usb_init() for TRATS   Pantelis Antoniou
    • [U-Boot] [PATCH 3/9] Only perform DFU board_usb_init() for TRATS   Marek Vasut
    • [U-Boot] [PATCH 3/9] Only perform DFU board_usb_init() for TRATS   Pantelis Antoniou
    • [U-Boot] [PATCH 3/9] Only perform DFU board_usb_init() for TRATS   Marek Vasut
    • [U-Boot] [PATCH 6/9] Properly zero out timeout value   Pantelis Antoniou
    • [U-Boot] [PATCH 6/9] Properly zero out timeout value   Marek Vasut
    • [U-Boot] [PATCH 6/9] Properly zero out timeout value   Pantelis Antoniou
    • [U-Boot] [PATCH 6/9] Properly zero out timeout value   Marek Vasut
• [U-Boot] bug in mmc driver   Ben-tal, Omer
  • [U-Boot] bug in mmc driver   Rommel Custodio
    • [U-Boot] [PATCH] cm-t35: add USB host support   Nikita Kiryanov
    • [U-Boot] [PATCH] cm-t35: add USB host support   Marek Vasut
• [U-Boot] [PATCH 14/14] fdt: Set kernaddr if fdt indicates a kernel is present   Dennis Lan (dlan)
  • [U-Boot] [PATCH 14/14] fdt: Set kernaddr if fdt indicates a kernel is present   Simon Glass
    • [U-Boot] [PATCH] fdt: Correct global_data condition in main   Simon Glass
    • [U-Boot] [PATCH] fdt: Correct global_data condition in main   Wolfgang Denk
    • [U-Boot] [PATCH] fdt: Correct global_data condition in main   Tom Rini
    • [U-Boot] [PATCH v2] fdt: Correct global_data condition in main   Simon Glass
    • [U-Boot] [PATCH v2] fdt: Correct global_data condition in main   Jerry Van Baren
• [U-Boot] arm-linux-ld: assertion failure   Quentin Strydom
  • [U-Boot] arm-linux-ld: assertion failure   Wolfgang Denk
• [U-Boot] U-Boot for MIPS AR7161   Dmytro
  • [U-Boot] U-Boot for MIPS AR7161   Luka Perkov
  • [U-Boot] U-Boot for MIPS AR7161   Drassal, Allan
  • [U-Boot] [PATCH 1/3] tegra: only define TEGRA_DEVICE_SETTINGS if not already defined   Stephen Warren
  • [U-Boot] [PATCH 3/3] tegra: seaboard: remove custom TEGRA_DEVICE_SETTINGS   Stephen Warren
  • [U-Boot] [PATCH 1/3] tegra: only define TEGRA_DEVICE_SETTINGS if not already defined   Simon Glass
  • [U-Boot] [PATCH 1/3] tegra: only define TEGRA_DEVICE_SETTINGS if not already defined   Stephen Warren
  • [U-Boot] [PATCH 1/3] tegra: only define TEGRA_DEVICE_SETTINGS if not already defined   Simon Glass
  • [U-Boot] [PATCH 1/3] tegra: only define TEGRA_DEVICE_SETTINGS if not already defined   Tom Warren
  • [U-Boot] [PATCH 1/3] tegra: only define TEGRA_DEVICE_SETTINGS if not already defined   Stephen Warren
  • [U-Boot] [PATCH 1/3] tegra: only define TEGRA_DEVICE_SETTINGS if not already defined   Tom Warren
  • [U-Boot] [PATCH 1/3] tegra: only define TEGRA_DEVICE_SETTINGS if not already defined   Stephen Warren
  • [U-Boot] [PATCH 2/3] tegra: add LCD into default TEGRA_DEVICE_SETTINGS   Stephen Warren
  • [U-Boot] Please pull u-boot-x86.git   Simon Glass
    • [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] Switch from mmcboot to ramboot?   Grant
  • [U-Boot] Switch from mmcboot to ramboot?   Lukasz Majewski
    • [U-Boot] Switch from mmcboot to ramboot?   Grant
      • [U-Boot] Switch from mmcboot to ramboot?   Lukasz Majewski
      • [U-Boot] [PATCH] dfu: Handle large transfers correctly   Pantelis Antoniou
      • [U-Boot] [PATCH] dfu: Handle large transfers correctly   Marek Vasut
      • [U-Boot] [PATCH] dfu: Handle large transfers correctly   Lukasz Majewski
      • [U-Boot] [PATCH] dfu: Handle large transfers correctly   Pantelis Antoniou
      • [U-Boot] [PATCH] dfu: Handle large transfers correctly   Lukasz Majewski
• [U-Boot] [Pull] u-boot-fdt/master   Jerry Van Baren
  • [U-Boot] [Pull] u-boot-fdt/master   Tom Rini
  • [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Simon Glass
  • [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Jae hoon Chung
  • [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Jaehoon Chung
  • [U-Boot] [PATCH 0/6 V4] EXYNOS5: FDT Support for I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/6 V4] EXYNOS5: FDT: Add I2C device node data   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/6 V4] EXYNOS5 : FDT: Add Aliases for I2C device   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/6 V4] EXYNOS5: FDT: Add compatible string for I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/6 V4] EXYNOS5: FDT : Decode peripheral id   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/6 V4] EXYNOS5: FDT : Decode peripheral id   Simon Glass
  • [U-Boot] [PATCH 5/6 V4] I2C: Driver changes for FDT support   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/6 V4] I2C: Driver changes for FDT support   Heiko Schocher
  • [U-Boot] [PATCH 5/6 V4] I2C: Driver changes for FDT support   Rajeshwari Birje
  • [U-Boot] [PATCH 6/6 V4] SMDK5250: Initialise I2C using FDT   Rajeshwari Shinde
  • [U-Boot] [PATCH 0/6 V4] EXYNOS5: FDT Support for I2C   Rajeshwari Birje
  • [U-Boot] [PATCH 00/10] USB: Gadget & DFU related fixes   Pantelis Antoniou
  • [U-Boot] [PATCH 00/10] USB: Gadget & DFU related fixes   Marek Vasut
  • [U-Boot] [PATCH 00/10] USB: Gadget & DFU related fixes   Pantelis Antoniou
  • [U-Boot] [PATCH 02/10] usb: Fix bug when both DFU & ETHER are defined   Pantelis Antoniou
  • [U-Boot] [PATCH 02/10] usb: Fix bug when both DFU & ETHER are defined   Marek Vasut
  • [U-Boot] [PATCH 03/10] g_dnl: Issue connect/disconnect as appropriate   Pantelis Antoniou
  • [U-Boot] [PATCH 04/10] g_dnl: Properly terminate string list.   Pantelis Antoniou
  • [U-Boot] [PATCH 04/10] g_dnl: Properly terminate string list.   Lukasz Majewski
  • [U-Boot] [PATCH 04/10] g_dnl: Properly terminate string list.   Marek Vasut
  • [U-Boot] [PATCH 04/10] g_dnl: Properly terminate string list.   Pantelis Antoniou
  • [U-Boot] [PATCH 04/10] g_dnl: Properly terminate string list.   Marek Vasut
  • [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Pantelis Antoniou
  • [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Lukasz Majewski
  • [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Tom Rini
  • [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Lukasz Majewski
  • [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Tom Rini
  • [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Lukasz Majewski
  • [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Tom Rini
  • [U-Boot] [PATCH 06/10] dfu: Fix crash when wrong number of arguments given   Pantelis Antoniou
  • [U-Boot] [PATCH 06/10] dfu: Fix crash when wrong number of arguments given   Lukasz Majewski
  • [U-Boot] [PATCH 07/10] dfu: Send correct DFU response from composite_setup   Pantelis Antoniou
  • [U-Boot] [PATCH 08/10] dfu: Properly zero out timeout value   Pantelis Antoniou
  • [U-Boot] [PATCH 08/10] dfu: Properly zero out timeout value   Lukasz Majewski
  • [U-Boot] [PATCH 09/10] dfu: Add a partition type target   Pantelis Antoniou
  • [U-Boot] [PATCH 10/10] dfu: Support larger than memory transfers.   Pantelis Antoniou
  • [U-Boot] [PATCH 00/10] USB: Gadget & DFU related fixes   Marek Vasut
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Pantelis Antoniou
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Tom Rini
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Pantelis Antoniou
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Pantelis Antoniou
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Pantelis Antoniou
  • [U-Boot] [PATCH 01/10] usb: Remove obsolete header file   Pantelis Antoniou
  • [U-Boot] [PATCH] mmc: Add an mmcsilent option   Pantelis Antoniou
  • [U-Boot] [PATCH] mmc: Add an mmcsilent option   Wolfgang Denk
  • [U-Boot] [PATCH] mmc: Add an mmcsilent option   Andy Fleming
  • [U-Boot] [PATCH] mmc: Add an mmcsilent option   Pantelis Antoniou
  • [U-Boot] [PATCH] mmc: Add an mmcsilent option   Tom Rini
  • [U-Boot] [PATCH 0/2] AM335x_EVM DFU support   Pantelis Antoniou
  • [U-Boot] [PATCH 1/2] am335x_evm: Define CONFIG_SYS_CACHELINE_SIZE   Pantelis Antoniou
  • [U-Boot] [PATCH 1/2] am335x_evm: Define CONFIG_SYS_CACHELINE_SIZE   Marek Vasut
  • [U-Boot] [PATCH 1/2] am335x_evm: Define CONFIG_SYS_CACHELINE_SIZE   Tom Rini
  • [U-Boot] [PATCH 2/2] am335x_evm: Add DFU config   Pantelis Antoniou
  • [U-Boot] [PATCH 2/2] am335x_evm: Add DFU config   Tom Rini
  • [U-Boot] [PATCH 0/6 V3] XYNOS5: FDT support for Sound   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/6 V3] EXYNOS5: FDT: Add sound device node data   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/6 V3] EXYNOS5: FDT: Add sound and codec device node   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/6 V3] EXYNOS5: FDT: Add compatible strings for sound   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/6 V3] Sound: Add FDT support to driver   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/6 V3] Sound: Add FDT support to driver   Simon Glass
  • [U-Boot] [PATCH 5/6 V3] Sound: WM8994: Add FDT support to codec   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/6 V3] Sound: WM8994: Add FDT support to codec   Simon Glass
  • [U-Boot] [PATCH 6/6 V3] Sound: Add FDT support to CMD.   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/6 V3] Sound: Add FDT support to CMD.   Simon Glass
  • [U-Boot] [PATCH] EXYNOS: Add L2 Cache Support.   Rajeshwari Shinde
  • [U-Boot] [PATCH] EXYNOS: Add L2 Cache Support.   Kyungmin Park
  • [U-Boot] [PATCH] EXYNOS: Add L2 Cache Support.   Rajeshwari Birje
• [U-Boot] [PATCH] tegra: remove custom TEGRA_DEVICE_SETTINGS for board files   Marc Dietrich
  • [U-Boot] [PATCH] tegra: remove custom TEGRA_DEVICE_SETTINGS for board files   Stephen Warren
• [U-Boot] [PATCH v0] mmc: forced sector mode when accessing OCR register   Davide Bonfanti
  • [U-Boot] [PATCH v0] mmc: forced sector mode when accessing OCR register   Jae hoon Chung
    • [U-Boot] [PATCH v0] mmc: forced sector mode when accessing OCR register   davide.bonfanti at bticino.it
• [U-Boot] [PATCH v0] davinci, mmc: Added a delay reading ext CSD register   Davide Bonfanti
  • [U-Boot] [PATCH v0] davinci, mmc: Added a delay reading ext CSD register   Tom Rini
    • [U-Boot] [PATCH] dfu: Handle large transfers correctly (take #2)   Pantelis Antoniou
    • [U-Boot] [PATCH] dfu: Handle large transfers correctly (take #2)   Marek Vasut
• [U-Boot] mtd/cfi: SST39VF3201B flash model not properly handled   Angelo Dureghello
  • [U-Boot] mtd/cfi: SST39VF3201B flash model not properly handled   Stefan Roese
    • [U-Boot] mtd/cfi: SST39VF3201B flash model not properly handled   Angelo Dureghello
      • [U-Boot] [PATCH 1/2] README.scrapyard: add missing commit IDs   Wolfgang Denk
      • [U-Boot] [PATCH 2/2] ARM: ns9750dev: remove remainders of dead board   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] README.scrapyard: add missing commit IDs   Graeme Russ
      • [U-Boot] [PATCH 1/2] README.scrapyard: add missing commit IDs   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] README.scrapyard: add missing commit IDs   Graeme Russ
      • [U-Boot] [PATCH] pxa25x_udc: Remove usbdescriptors.h   Lukasz Dalek
      • [U-Boot] [PATCH] pxa25x_udc: Remove usbdescriptors.h   Marek Vasut
      • [U-Boot] [PATCH] pxa25x_udc: Remove usbdescriptors.h   Łukasz Dałek
      • [U-Boot] [PATCH] pxa25x_udc: Remove usbdescriptors.h   Marek Vasut
      • [U-Boot] [PATCH v7] h2200: Add USB CDC ethernet support   Lukasz Dalek
      • [U-Boot] [PATCH v2 5/5] x86: Select stdio devices for coreboot   Simon Glass
      • [U-Boot] [PATCH v2 01/12] x86: Allow compiling out realmode/bios code   Simon Glass
      • [U-Boot] [PATCH v2 01/12] x86: Allow compiling out realmode/bios code   Graeme Russ
      • [U-Boot] [PATCH v2 01/12] x86: Allow compiling out realmode/bios code   Simon Glass
      • [U-Boot] [PATCH v2 01/12] x86: Allow compiling out realmode/bios code   Graeme Russ
      • [U-Boot] [PATCH v2 01/12] x86: Allow compiling out realmode/bios code   Simon Glass
      • [U-Boot] [PATCH v2 01/12] x86: Allow compiling out realmode/bios code   Graeme Russ
      • [U-Boot] [PATCH v3 01/12] x86: Allow compiling out realmode/bios code   Simon Glass
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH] EXYNOS5: Add L2 Cache Support.   Rajeshwari Shinde
• [U-Boot] [PATCHv3 0/4] enable USB on sam9x5ek boards   richard.genoud at gmail.com
• [U-Boot] [PATCHv3 1/4] usb documentation: fix typo   richard.genoud at gmail.com
• [U-Boot] [PATCHv3 2/4] at91sam9x5: enable USB support for 9x5ek board.   richard.genoud at gmail.com
  • [U-Boot] [PATCHv3 2/4] at91sam9x5: enable USB support for 9x5ek board.   Bo Shen
• [U-Boot] [PATCHv3 3/4] at91sam9x5ek: regroup FAT/DOS features   richard.genoud at gmail.com
  • [U-Boot] [PATCHv3 3/4] at91sam9x5ek: regroup FAT/DOS features   Bo Shen
• [U-Boot] [PATCHv3 4/4] at91sam9x5ek: add USB configuration   richard.genoud at gmail.com
  • [U-Boot] [PATCHv3 4/4] at91sam9x5ek: add USB configuration   Bo Shen
    • [U-Boot] [PATCH] mxs: Silence elftosb   Marek Vasut
    • [U-Boot] [PATCH] mxs: Silence elftosb   Otavio Salvador
    • [U-Boot] [PATCH] mxs: i2c: Implement algorithm to set up arbitrary i2c speed   Marek Vasut
    • [U-Boot] [PATCH] mxs: i2c: Implement algorithm to set up arbitrary i2c speed   Wolfgang Denk
    • [U-Boot] [PATCH] mxs: i2c: Implement algorithm to set up arbitrary i2c speed   Marek Vasut
    • [U-Boot] [PATCH v2] mxs: i2c: Implement algorithm to set up arbitrary i2c speed   Marek Vasut
    • [U-Boot] [PATCH 1/2] mxs: Implement common function to setup VDDx   Marek Vasut
    • [U-Boot] [PATCH 2/2] mxs: Properly setup VDDD in power supply setup code   Marek Vasut
    • [U-Boot] [PATCH 1/2] mxs: Implement common function to setup VDDx   Otavio Salvador
    • [U-Boot] [PATCH 1/2] mxs: Implement common function to setup VDDx   Marek Vasut
    • [U-Boot] [PATCH 1/2] mxs: Implement common function to setup VDDx   Otavio Salvador
    • [U-Boot] [PATCH v3 03/12] x86: video: Add coreboot framebuffer support   Simon Glass
    • [U-Boot] [PATCH 0/9] USB: Gadget & DFU related fixes (v3)   Pantelis Antoniou
    • [U-Boot] [PATCH 1/9] usb: Fix bug when both DFU & ETHER are defined   Pantelis Antoniou
    • [U-Boot] [PATCH 2/9] g_dnl: Issue connect/disconnect as appropriate   Pantelis Antoniou
    • [U-Boot] [PATCH 3/9] g_dnl: Properly terminate string list.   Pantelis Antoniou
    • [U-Boot] [PATCH 4/9] dfu: Only perform DFU board_usb_init() for TRATS   Pantelis Antoniou
    • [U-Boot] [PATCH 4/9] dfu: Only perform DFU board_usb_init() for TRATS   Lukasz Majewski
    • [U-Boot] [PATCH 5/9] dfu: Fix crash when wrong number of arguments given   Pantelis Antoniou
    • [U-Boot] [PATCH 5/9] dfu: Fix crash when wrong number of arguments given   Lukasz Majewski
    • [U-Boot] [PATCH 6/9] dfu: Send correct DFU response from composite_setup   Pantelis Antoniou
    • [U-Boot] [PATCH 7/9] dfu: Properly zero out timeout value   Pantelis Antoniou
    • [U-Boot] [PATCH 8/9] dfu: Add a partition type target   Pantelis Antoniou
    • [U-Boot] [PATCH 9/9] dfu: Support larger than memory transfers.   Pantelis Antoniou
    • [U-Boot] [PATCH] mxs: Staticize SPL functions   Marek Vasut
    • [U-Boot] [PATCH v3 0/9] USB: Gadget & DFU related fixes   Pantelis Antoniou
    • [U-Boot] [PATCH v3 1/9] usb: Fix bug when both DFU & ETHER are defined   Pantelis Antoniou
    • [U-Boot] [PATCH v3 2/9] g_dnl: Issue connect/disconnect as appropriate   Pantelis Antoniou
    • [U-Boot] [PATCH v3 3/9] g_dnl: Properly terminate string list.   Pantelis Antoniou
    • [U-Boot] [PATCH v3 4/9] dfu: Only perform DFU board_usb_init() for TRATS   Pantelis Antoniou
    • [U-Boot] [PATCH v3 5/9] dfu: Fix crash when wrong number of arguments given   Pantelis Antoniou
    • [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Pantelis Antoniou
    • [U-Boot] [PATCH v3 7/9] dfu: Properly zero out timeout value   Pantelis Antoniou
    • [U-Boot] [PATCH v3 8/9] dfu: Add a partition type target   Pantelis Antoniou
    • [U-Boot] [PATCH v3 9/9] dfu: Support larger than memory transfers.   Pantelis Antoniou