January 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jan 1 00:05:11 CET 2012
Ending: Tue Jan 31 23:49:37 CET 2012
Messages: 2509

• [U-Boot] [PATCH] [trivial] env: remove value from boolean defines   Mike Frysinger
• [U-Boot] [PATCH] [trivial] common.h: remove value from bool defines   Mike Frysinger
• [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Wolfgang Denk
  • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Simon Glass
    • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Wolfgang Denk
      • [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected   Marek Vasut
      • [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected   Marek Vasut
      • [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected   Fabio Estevam
      • [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected   Marek Vasut
      • [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected   Stefano Babic
      • [U-Boot] add nand spl boot for qi_lb60 board   Xiangfu Liu
      • [U-Boot] add nand spl boot for qi_lb60 board   Scott Wood
      • [U-Boot] add nand spl boot for qi_lb60 board   Scott Wood
      • [U-Boot] add nand spl boot for qi_lb60 board   Xiangfu Liu
      • [U-Boot] add nand spl boot for qi_lb60 board   Scott Wood
      • [U-Boot] add nand spl boot for qi_lb60 board   Xiangfu Liu
      • [U-Boot] add nand spl boot for qi_lb60 board   Scott Wood
      • [U-Boot] add nand spl boot for qi_lb60 board   Xiangfu Liu
  • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Simon Glass
    • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Graeme Russ
      • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Wolfgang Denk
      • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Simon Glass
      • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Wolfgang Denk
      • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Graeme Russ
      • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Simon Glass
      • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Wolfgang Denk
      • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Simon Glass
      • [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Simon Glass
      • [U-Boot] [PATCH] Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
      • [U-Boot] [PATCH] Change kernel address in dataflash to match u-boot's size   Marek Vasut
      • [U-Boot] [PATCH] Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
      • [U-Boot] [PATCH 00/17] x86: Rework of board init code (plus support patches)   Graeme Russ
      • [U-Boot] [PATCH 01/17] x86: Import glibc memcpy implementation   Graeme Russ
      • [U-Boot] [PATCH 01/17] x86: Import glibc memcpy implementation   Simon Glass
      • [U-Boot] [PATCH v2 01/17] x86: Import glibc memcpy implementation   Graeme Russ
      • [U-Boot] [PATCH v2 02/17] x86: Speed up copy-to-RAM and clear BSS operations   Graeme Russ
      • [U-Boot] [PATCH v2 02/17] x86: Speed up copy-to-RAM and clear BSS operations   Graeme Russ
      • [U-Boot] [PATCH v2 02/17] x86: Speed up copy-to-RAM and clear BSS operations   Simon Glass
      • [U-Boot] [PATCH v2 03/17] x86: Remove GDR related magic numbers   Graeme Russ
      • [U-Boot] [PATCH v2 03/17] x86: Remove GDR related magic numbers   Simon Glass
      • [U-Boot] [PATCH v2 03/17] x86: Remove GDR related magic numbers   Simon Glass
      • [U-Boot] [PATCH v2 04/17] x86: Rework Global Descriptor Table loading   Graeme Russ
      • [U-Boot] [PATCH v2 04/17] x86: Rework Global Descriptor Table loading   Simon Glass
      • [U-Boot] [PATCH v2 05/17] x86: Simplify Flash-to-RAM code execution transition   Graeme Russ
      • [U-Boot] [PATCH v2 05/17] x86: Simplify Flash-to-RAM code execution transition   Simon Glass
      • [U-Boot] [PATCH v2 06/17] x86: Rework relocation calculations   Graeme Russ
      • [U-Boot] [PATCH v2 06/17] x86: Rework relocation calculations   Simon Glass
      • [U-Boot] [PATCH v2 07/17] x86: Use fs for global data   Graeme Russ
      • [U-Boot] [PATCH v2 07/17] x86: Use fs for global data   Simon Glass
      • [U-Boot] [PATCH v2 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot   Graeme Russ
      • [U-Boot] [PATCH v2 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot   Simon Glass
      • [U-Boot] [PATCH v2 09/17] x86: Create weak init_cache() and default enable_caches() functions   Graeme Russ
      • [U-Boot] [PATCH v2 09/17] x86: Create weak init_cache() and default enable_caches() functions   Simon Glass
      • [U-Boot] [PATCH v2 10/17] x86: Allow cache before copy to RAM   Graeme Russ
      • [U-Boot] [PATCH v2 10/17] x86: Allow cache before copy to RAM   Simon Glass
      • [U-Boot] [PATCH v2 11/17] x86: Tweak IDT and GDT for alignment and readability   Graeme Russ
      • [U-Boot] [PATCH v2 11/17] x86: Tweak IDT and GDT for alignment and readability   Simon Glass
      • [U-Boot] [PATCH v2 12/17] CHECKPATCH: arch/x86/lib/*   Graeme Russ
      • [U-Boot] [PATCH v2 12/17] CHECKPATCH: arch/x86/lib/*   Simon Glass
      • [U-Boot] [PATCH v2 13/17] x86: Move do_go_exec() out of board.c   Graeme Russ
      • [U-Boot] [PATCH v2 13/17] x86: Move do_go_exec() out of board.c   Simon Glass
      • [U-Boot] [PATCH v2 14/17] x86: Move setup_pcat_compatibility() out of board.c   Graeme Russ
      • [U-Boot] [PATCH v2 14/17] x86: Move setup_pcat_compatibility() out of board.c   Simon Glass
      • [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c   Graeme Russ
      • [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c   Simon Glass
      • [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c   Graeme Russ
      • [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c   Simon Glass
      • [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c   Simon Glass
      • [U-Boot] [PATCH v2 16/17] x86: Split init functions out of board.c   Graeme Russ
      • [U-Boot] [PATCH v2 16/17] x86: Split init functions out of board.c   Simon Glass
      • [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop   Graeme Russ
      • [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop   Simon Glass
      • [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop   Graeme Russ
      • [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop   Simon Glass
      • [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop   Simon Glass
      • [U-Boot] [PATCH v2 01/17] x86: Import glibc memcpy implementation   Simon Glass
      • [U-Boot] [PATCH 02/17] x86: Speed up copy-to-RAM and clear BSS operations   Graeme Russ
      • [U-Boot] [PATCH 02/17] x86: Speed up copy-to-RAM and clear BSS operations   Simon Glass
      • [U-Boot] [PATCH 02/17] x86: Speed up copy-to-RAM and clear BSS operations   Graeme Russ
      • [U-Boot] [PATCH 03/17] x86: Remove GDR related magic numbers   Graeme Russ
      • [U-Boot] [PATCH 03/17] x86: Remove GDR related magic numbers   Simon Glass
      • [U-Boot] [PATCH 03/17] x86: Remove GDR related magic numbers   Graeme Russ
      • [U-Boot] [PATCH 04/17] x86: Rework Global Descriptor Table loading   Graeme Russ
      • [U-Boot] [PATCH 04/17] x86: Rework Global Descriptor Table loading   Simon Glass
      • [U-Boot] [PATCH 04/17] x86: Rework Global Descriptor Table loading   Graeme Russ
      • [U-Boot] [PATCH 05/17] x86: Simplify Flash-to-RAM code execution transition   Graeme Russ
      • [U-Boot] [PATCH 05/17] x86: Simplify Flash-to-RAM code execution transition   Simon Glass
      • [U-Boot] [PATCH 05/17] x86: Simplify Flash-to-RAM code execution transition   Graeme Russ
      • [U-Boot] [PATCH 06/17] x86: Rework relocation calcuations   Graeme Russ
      • [U-Boot] [PATCH 06/17] x86: Rework relocation calcuations   Simon Glass
      • [U-Boot] [PATCH 07/17] x86: Use fs for global data   Graeme Russ
      • [U-Boot] [PATCH 07/17] x86: Use fs for global data   Simon Glass
      • [U-Boot] [PATCH 07/17] x86: Use fs for global data   Graeme Russ
      • [U-Boot] [PATCH 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot   Graeme Russ
      • [U-Boot] [PATCH 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot   Simon Glass
      • [U-Boot] [PATCH 09/17] x86: Create weak init_cache() function   Graeme Russ
      • [U-Boot] [PATCH 09/17] x86: Create weak init_cache() function   Simon Glass
      • [U-Boot] [PATCH 09/17] x86: Create weak init_cache() function   Graeme Russ
      • [U-Boot] [PATCH 10/17] x86: Allow cache before copy to RAM   Graeme Russ
      • [U-Boot] [PATCH 10/17] x86: Allow cache before copy to RAM   Simon Glass
      • [U-Boot] [PATCH 10/17] x86: Allow cache before copy to RAM   Graeme Russ
      • [U-Boot] [PATCH 11/17] CHECKPATCH: arch/x86/cpu/*   Graeme Russ
      • [U-Boot] [PATCH 11/17] CHECKPATCH: arch/x86/cpu/*   Simon Glass
      • [U-Boot] [PATCH 11/17] CHECKPATCH: arch/x86/cpu/*   Graeme Russ
      • [U-Boot] [PATCH 12/17] CHECKPATCH: arch/x86/lib/*   Graeme Russ
      • [U-Boot] [PATCH 12/17] CHECKPATCH: arch/x86/lib/*   Simon Glass
      • [U-Boot] [PATCH 13/17] x86: Move do_go_exec() out of board.c   Graeme Russ
      • [U-Boot] [PATCH 13/17] x86: Move do_go_exec() out of board.c   Simon Glass
      • [U-Boot] [PATCH 14/17] x86: Move setup_pcat_compatibility() out of board.c   Graeme Russ
      • [U-Boot] [PATCH 14/17] x86: Move setup_pcat_compatibility() out of board.c   Simon Glass
      • [U-Boot] [PATCH 14/17] x86: Move setup_pcat_compatibility() out of board.c   Graeme Russ
      • [U-Boot] [PATCH 15/17] x86: Move relocation code out of board.c   Graeme Russ
      • [U-Boot] [PATCH 16/17] x86: Simplify board.c   Graeme Russ
      • [U-Boot] [PATCH 16/17] x86: Simplify board.c   Simon Glass
      • [U-Boot] [PATCH 16/17] x86: Simplify board.c   Graeme Russ
      • [U-Boot] [PATCH 17/17] x86: Tweak initialisation procedure   Graeme Russ
      • [U-Boot] [PATCH 17/17] x86: Tweak initialisation procedure   Simon Glass
      • [U-Boot] [PATCH 17/17] x86: Tweak initialisation procedure   Graeme Russ
  • [U-Boot] NAND boot looks broken on P1020RDB   Felix Radensky
    • [U-Boot] NAND boot looks broken on P1020RDB   Aggrwal Poonam-B10812
    • [U-Boot] [PATCH] ppc4xx: Setup HICB on Io64   Dirk Eibach
    • [U-Boot] [PATCH] ppc4xx: Setup HICB on Io64   Stefan Roese
• [U-Boot] Secure update of uboot devices?   Wolfgang Denk
  • [U-Boot] Secure update of uboot devices?   Andreas Bäck
    • [U-Boot] Secure update of uboot devices?   Mike Frysinger
    • [U-Boot] Secure update of uboot devices?   Wolfgang Denk
      • [U-Boot] [PATCH v4 0/4] mmc: Implement central card-detection.   Thierry Reding
      • [U-Boot] [PATCH v4 1/4] mmc: Change board_mmc_getcd() function prototype.   Thierry Reding
      • [U-Boot] [PATCH v4 1/4] mmc: Change board_mmc_getcd() function prototype.   Jason Liu
      • [U-Boot] [PATCH v4 2/4] mmc: Implement card detection.   Thierry Reding
      • [U-Boot] [PATCH v4 2/4] mmc: Implement card detection.   Jason Liu
      • [U-Boot] [PATCH v4 4/4] mmc: tegra2: Implement card-detect hook.   Thierry Reding
      • [U-Boot] [PATCH v4 0/4] mmc: Implement central card-detection.   Andy Fleming
      • [U-Boot] [PATCH v4 3/4] mmc: fsl_esdhc: Implement card-detect hook.   Thierry Reding
      • [U-Boot] [PATCH v4 3/4] mmc: fsl_esdhc: Implement card-detect hook.   Jason Liu
    • [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.   Thierry Reding
      • [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.   Andy Fleming
• [U-Boot] initcall revisited - A new idea to discuss   Graeme Russ
  • [U-Boot] initcall revisited - A new idea to discuss   Wolfgang Denk
    • [U-Boot] initcall revisited - A new idea to discuss   Graeme Russ
      • [U-Boot] initcall revisited - A new idea to discuss   Wolfgang Denk
      • [U-Boot] initcall revisited - A new idea to discuss   Graeme Russ
      • [U-Boot] initcall revisited - A new idea to discuss   Graeme Russ
      • [U-Boot] initcall revisited - A new idea to discuss   Simon Glass
      • [U-Boot] initcall revisited - A new idea to discuss   Graeme Russ
      • [U-Boot] initcall revisited - A new idea to discuss   Hebbar, Gururaja
      • [U-Boot] initcall revisited - A new idea to discuss   Wolfgang Denk
      • [U-Boot] initcall revisited - A new idea to discuss   Wolfgang Denk
      • [U-Boot] initcall revisited - A new idea to discuss   Simon Glass
      • [U-Boot] initcall revisited - A new idea to discuss   Wolfgang Denk
      • [U-Boot] initcall revisited - A new idea to discuss   Simon Glass
  • [U-Boot] CONFIG_ENV_SIZE_REDUND   Frans Meulenbroeks
    • [U-Boot] [PATCH] fw_env.h: added a few missing defines   Frans Meulenbroeks
    • [U-Boot] [PATCH] fw_env.h: added a few missing defines   Wolfgang Denk
    • [U-Boot] tools/env/fw_env.h comment/code mismatch   Frans Meulenbroeks
      • [U-Boot] tools/env/fw_env.h comment/code mismatch   Wolfgang Denk
      • [U-Boot] [PATCH] fw_env: use vars from the board config   Frans Meulenbroeks
      • [U-Boot] [PATCH] fw_env: use vars from the board config   Marek Vasut
      • [U-Boot] [PATCH 0/6] Cleanups and updates for cm-t35/3730   Igor Grinberg
      • [U-Boot] [PATCH 1/6] cm-t35: cleanup the config file   Igor Grinberg
      • [U-Boot] [PATCH 1/6] cm-t35: cleanup the config file   Igor Grinberg
      • [U-Boot] [PATCH 2/6] cm-t35: various cleanups   Igor Grinberg
      • [U-Boot] [PATCH 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Igor Grinberg
      • [U-Boot] [PATCH 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Tom Rini
      • [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Igor Grinberg
      • [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Wolfgang Denk
      • [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Nikita Kiryanov
      • [U-Boot] [PATCH v3 3/6] cm-t35: add EEPROM module and pass Linux a serial number   Igor Grinberg
      • [U-Boot] [PATCH 4/6] omap3: make get_board_rev() function weak   Igor Grinberg
      • [U-Boot] [PATCH 4/6] omap3: make get_board_rev() function weak   Tom Rini
      • [U-Boot] [PATCH v2 4/6] omap3: make get_board_rev() function weak   Igor Grinberg
      • [U-Boot] [PATCH 5/6] cm-t35: pass correct revision information to Linux   Igor Grinberg
      • [U-Boot] [PATCH 6/6] cm-t35: use the new EEPROM module to read the MAC address   Igor Grinberg
      • [U-Boot] [PATCH v2 6/6] cm-t35: use the new EEPROM module to read the MAC address   Igor Grinberg
      • [U-Boot] [PATCH 0/6] Cleanups and updates for cm-t35/3730   Tom Rini
      • [U-Boot] [PATCH 0/6] Cleanups and updates for cm-t35/3730   Tom Rini
• [U-Boot] stuck after redirecting stdout to nc   ran shalit
  • [U-Boot] stuck after redirecting stdout to nc   Mike Frysinger
    • [U-Boot] stuck after redirecting stdout to nc   Ran Shalit
    • [U-Boot] stuck after redirecting stdout to nc   Wolfgang Denk
    • [U-Boot] stuck after redirecting stdout to nc   Ran Shalit
    • [U-Boot] stuck after redirecting stdout to nc   Wolfgang Denk
• [U-Boot] [PATCH] fw_env: use vars from the board config   Marek Vasut
  • [U-Boot] [PATCH resend] OMAP3: Remove unused define CONFIG_OMAP3_*_DDR   Thomas Weber
  • [U-Boot] [PATCH resend] OMAP3: Remove unused define CONFIG_OMAP3_*_DDR   Tom Rini
• [U-Boot] [PATCH] fat: reset VFAT short alias checksum on first match   Sergei Shtylyov
  • [U-Boot] [PATCH] fat: reset VFAT short alias checksum on first match   Wolfgang Denk
• [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
  • [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Albert ARIBAUD
• [U-Boot] [PATCH] kirkwood_spi: fix setting of irq mask   Michael Walle
  • [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes   Simon Glass
    • [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
    • [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes   Simon Glass
    • [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes   Russell King - ARM Linux
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Michael Walle
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Wolfgang Denk
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Michael Walle
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Wolfgang Denk
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Michael Walle
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Wolfgang Denk
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Michael Walle
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Michael Walle
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Michael Walle
    • [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl   Michael Walle
• [U-Boot] [PATCH] Add support for MMC to fw_printenv/setenv   Christian Daudt
  • [U-Boot] [PATCH] Add support for MMC to fw_printenv/setenv   Mike Frysinger
    • [U-Boot] [PATCH v3 0/3] Added SPL support   Chandan Nath
    • [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Chandan Nath
    • [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Igor Grinberg
    • [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Kumar Nath, Chandan
    • [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Igor Grinberg
    • [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Wolfgang Denk
    • [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Tom Rini
    • [U-Boot] [PATCH v3 1/3] ARM:AM33XX: Fix ddr and timer register offset   Chandan Nath
    • [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support   Chandan Nath
    • [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support   Igor Grinberg
    • [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support   Tom Rini
    • [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support   Igor Grinberg
    • [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support   Tom Rini
• [U-Boot] 4k page ONFI NAND   Vipin Kumar
  • [U-Boot] 4k page ONFI NAND   Scott Wood
    • [U-Boot] [PATCH] beagle: add eeprom expansion board info for bct brettl3   Peter Meerwald
    • [U-Boot] [PATCH] beagle: add eeprom expansion board info for bct brettl3   Tom Rini
• [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config   Tom Rini
• [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900   Tom Rini
  • [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900   Pali Rohár
    • [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900   Tom Rini
  • [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu   Tom Rini
    • [U-Boot] [PATCH v2 6/6] overo: add SPL support / CONFIG_SYS_TEXT_BASE changed to 0x80100000   Tom Rini
    • [U-Boot] [PATCH v2 0/6] overo: add SPL support   Tom Rini
      • [U-Boot] [PATCH v2 0/6] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes   Dmitry Torokhov
  • [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes   Russell King - ARM Linux
• [U-Boot] [PATCH] arm, davinci: Change byte order of RTC kick register values   Tom Rini
• [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes   Olof Johansson
  • [U-Boot] [PATCH v5] ARMV7: Add support For Logic OMAP35x/DM37x modules   Tom Rini
  • [U-Boot] [PATCH] omap4: fix boot issue on ES2.0 Panda   Tom Rini
• [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes   Dmitry Torokhov
• [U-Boot] [PATCH] OMAP MMC: Add delay before waiting for status   Tom Rini
  • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Tom Rini
  • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Peter Bigot
  • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Tom Rini
  • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Peter Bigot
  • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Peter Bigot
  • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Andreas Müller
• [U-Boot] [PATCH] MX28: Fix MXSBOOT segfault if no params specified   Marek Vasut
• [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Marek Vasut
  • [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Scott Wood
    • [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Marek Vasut
• [U-Boot] User Question   Bishop, Mark
  • [U-Boot] User Question   Marek Vasut
  • [U-Boot] User Question   Mike Frysinger
• [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip   Matthew L. Creech
  • [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip   Scott Wood
    • [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip   Matthew L. Creech
    • [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip   Scott Wood
    • [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip   Matthew L. Creech
• [U-Boot] [RFC PATCH v2 0/15] bootstage: record and publish boot progress timing   Simon Glass
  • [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Simon Glass
  • [U-Boot] [PATCH V2 2/2] Exynos: Fix ARM Clock frequency calculation   Minkyu Kang
  • [U-Boot] [PATCH V2 1/2] Exynos: PWM: Add TCMPB3 field in pwm structure   Minkyu Kang
  • [U-Boot] [PATCH] Origen: Select SCLKMPLL as FIMD0 parent clock   Minkyu Kang
    • [U-Boot] SPL Linux Boot - updated   Stefano Babic
    • [U-Boot] [PATCH V12 03/14] omap-common: Add NAND SPL linux booting   Stefano Babic
    • [U-Boot] [PATCH V12 04/14] devkit8000/spl: init GPMC for dm9000 in SPL   Stefano Babic
    • [U-Boot] [PATCH V12 04/14] devkit8000/spl: init GPMC for dm9000 in SPL   Simon Schwarz
    • [U-Boot] [PATCH V13 04/14] devkit8000/spl: init GPMC for dm9000 in SPL   Stefano Babic
    • [U-Boot] [PATCH V12 05/14] omap-common/spl: Add linux boot to SPL   Stefano Babic
    • [U-Boot] [PATCH V12 06/14] omap/spl: change output of spl_parse_image_header   Stefano Babic
    • [U-Boot] [PATCH V12 07/14] devkit8000: Implement and activate direct OS boot   Stefano Babic
    • [U-Boot] [PATCH V12 08/14] Add cache functions to SPL for armv7   Stefano Babic
    • [U-Boot] [PATCH V12 08/14] Add cache functions to SPL for armv7   Aneesh V
    • [U-Boot] [PATCH V12 08/14] Add cache functions to SPL for armv7   Stefano Babic
    • [U-Boot] [PATCH V12 09/14] OMAP3: SPL: do not call I2C init if no I2C is set.   Stefano Babic
    • [U-Boot] [PATCH V12 10/14] OMAP3: move SPL files to be used by other architectures.   Stefano Babic
    • [U-Boot] [PATCH V12 11/14] TI: SPL: make SPL available for other SOCs as TI   Stefano Babic
    • [U-Boot] [PATCH V12 12/14] SPL: call cleanup_before_linux() before booting Linux   Stefano Babic
    • [U-Boot] [PATCH V12 13/14] Fix build OMAP4/5   Stefano Babic
    • [U-Boot] [PATCH V12 14/14] OMAP3: twister: add support to boot Linux from SPL   Stefano Babic
    • [U-Boot] [PATCH V12 15/15] SPL: wrong prototype for omap_rev_string   Stefano Babic
    • [U-Boot] [PATCH V12 01/14] Add cmd_spl command   Stefano Babic
    • [U-Boot] [PATCH V12 02/14] devki8000: add config for spl command   Stefano Babic
    • [U-Boot] [PATCH V12 02/14] devki8000: add config for spl command   Andreas Bießmann
    • [U-Boot] [PATCH V12 02/14] devki8000: add config for spl command   stefano babic
    • [U-Boot] [PATCH V13 02/14] devkit8000: add config for spl command   Stefano Babic
    • [U-Boot] [PATCH V2 4/4] ARM: omap3: Added Teejet mt_ventoux   Stefano Babic
    • [U-Boot] [PATCH V2 4/4] ARM: omap3: Added Teejet mt_ventoux   Tom Rini
    • [U-Boot] [PATCH V2 4/4] ARM: omap3: Added Teejet mt_ventoux   Stefano Babic
• [U-Boot] [PATCH] MX28: Fix MXSBOOT segfault if no params specified   Stefano Babic
• [U-Boot] [PATCH] m28evk: Use GENERATED_GBL_DATA_SIZE   Stefano Babic
• [U-Boot] [PATCH V12 08/14] Add cache functions to SPL for armv7   Stefano Babic
  • [U-Boot] [PATCH] cmd_nand: add biterror insertion command for NAND Flash   Holger Brunck
  • [U-Boot] [PATCH] cmd_nand: add biterror insertion command for NAND Flash   Scott Wood
  • [U-Boot] [PATCH] cmd_nand: add biterror insertion command for NAND Flash   Holger Brunck
  • [U-Boot] [PATCH] cmd_nand: add biterror insertion command for NAND Flash   Scott Wood
  • [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config   Grant Erickson
  • [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config   Tom Rini
  • [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config   Grant Erickson
  • [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config   Wolfgang Denk
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
  • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
  • [U-Boot] [GIT PULL] Pull request: u-boot-imx   Fabio Estevam
    • [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
  • [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH] USB: move keyboard polling into kbd driver   Allen Martin
  • [U-Boot] [PATCH] USB: move keyboard polling into kbd driver   Allen Martin
• [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect   Allen Martin
  • [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect   Allen Martin
• [U-Boot] M28 U-Boot config   Marek Vasut
• [U-Boot] Help with Cross-Compiling U-boot for PPC   Will Khan
  • [U-Boot] Help with Cross-Compiling U-boot for PPC   Peter Barada
• [U-Boot] [PATCH 2/2] mtd/nand: Fix IFC driver to support 2K NAND page   Scott Wood
• [U-Boot] [PATCH 1/2] mtd/nand:Fix wrong address read in is_blank()   Scott Wood
• [U-Boot] [PATCH] mpc8313erdb: fix mtdparts address   Scott Wood
  • [U-Boot] [PATCH] mpc8313erdb: fix mtdparts address   Kim Phillips
• [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Scott Wood
  • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Tom Rini
  • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Marek Vasut
  • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Tom Rini
  • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Scott Wood
  • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Tom Rini
  • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Scott Wood
  • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Tom Rini
  • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Scott Wood
  • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Mike Frysinger
    • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Scott Wood
      • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Mike Frysinger
      • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Tom Rini
      • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Tom Rini
      • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Mike Frysinger
      • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Tom Rini
      • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Scott Wood
      • [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Mike Frysinger
      • [U-Boot] [PATCH v3 0/7] overo: add SPL support   Andreas Müller
      • [U-Boot] [PATCH v3 1/7] drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts   Andreas Müller
      • [U-Boot] [PATCH v3 1/7] drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts   Heiko Schocher
      • [U-Boot] [PATCH v3 2/7] board/overo/overo.c: replace printf with one argument by puts   Andreas Müller
      • [U-Boot] [PATCH v3 3/7] include/configs/omap3_overo.h: several cleanups   Andreas Müller
      • [U-Boot] [PATCH v3 4/7] drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM   Andreas Müller
      • [U-Boot] [PATCH v3 4/7] drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM   Heiko Schocher
      • [U-Boot] [PATCH v3 4/7] drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM   Tom Rini
      • [U-Boot] [PATCH v3 5/7] OMAP SPL: call timer_init in s_init to make udelay work earlier   Andreas Müller
      • [U-Boot] [PATCH v3 6/7] omap_rev_string: output to stdout   Andreas Müller
      • [U-Boot] [PATCH v3 6/7] omap_rev_string: output to stdout   Tom Rini
      • [U-Boot] [PATCH v3 6/7] omap_rev_string: output to stdout   Tom Rini
      • [U-Boot] [PATCH v3 7/7] overo: add SPL support   Andreas Müller
      • [U-Boot] [PATCH v3 7/7] overo: add SPL support   Tom Rini
      • [U-Boot] [PATCH v3 0/7] overo: add SPL support   Tom Rini
    • [U-Boot] A Problem of u-boot on TI PandaBoard porting   Qiao.HelloWorld at gmail.com
      • [U-Boot] A Problem of u-boot on TI PandaBoard porting   John Rigby
      • [U-Boot] A Problem of u-boot on TI PandaBoard porting   Qiao.HelloWorld at gmail.com
      • [U-Boot] A Problem of u-boot on TI PandaBoard porting   Peter Barada
      • [U-Boot] A Problem of u-boot on TI PandaBoard porting   Ira W. Snyder
      • [U-Boot] A Problem of u-boot on TI PandaBoard porting   Qiao.HelloWorld at gmail.com
      • [U-Boot] [PATCH] ARMV7: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH v3 0/3] ARMV7: Exynos4: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH v3 1/3] ARMV7: Exynos4: Add watchdog.h for Exynos4   HeungJun, Kim
      • [U-Boot] [PATCH v3 2/3] ARMV7: Exynos4: Add supoort power for Exynos4   HeungJun, Kim
      • [U-Boot] [PATCH v3 3/3] ARMV7: Exynos4: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH v3 3/3] ARMV7: Exynos4: Add support for TRATS board   Minkyu Kang
      • [U-Boot] [PATCH v3 3/3] ARMV7: Exynos4: Add support for TRATS board   Kim, Heungjun
      • [U-Boot] [PATCH v3 3/3] ARMV7: Exynos4: Add support for TRATS board   Minkyu Kang
      • [U-Boot] [PATCH v3 RESEND] ARMV7: Exynos4: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH v3 RESEND] ARMV7: Exynos4: Add support for TRATS board   Kim, Heungjun
      • [U-Boot] [PATCH v3 RESEND 3/3] ARMV7: Exynos4: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH v4 0/4] ARMV7: Exynos4: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH v4 1/4] ARMV7: Exynos4: Add watchdog.h for Exynos4   HeungJun, Kim
      • [U-Boot] [PATCH v4 2/4] ARMV7: Exynos4: Add supoort power for Exynos4   HeungJun, Kim
      • [U-Boot] [PATCH v4 3/4] ARMV7: Exynos4: Fix toolchain optimization problem for using volatile   HeungJun, Kim
      • [U-Boot] [PATCH v4 4/4] ARMV7: Exynos4: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH v5 0/3] ARMV7: Exynos4: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH v5 1/3] ARMV7: Exynos4: Add watchdog.h for Exynos4   HeungJun, Kim
      • [U-Boot] [PATCH v5 2/3] ARMV7: Exynos4: Add supoort power for Exynos4   HeungJun, Kim
      • [U-Boot] [PATCH v5 3/3] ARMV7: Exynos4: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH v5 0/3] ARMV7: Exynos4: Add support for TRATS board   Minkyu Kang
  • [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Chander Kashyap
    • [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Minkyu Kang
      • [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Chander Kashyap
      • [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Wolfgang Denk
      • [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Chander Kashyap
      • [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Minkyu Kang
      • [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Chander Kashyap
      • [U-Boot] [PATCH] ARMV7: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH] ARMV7: Add support for TRATS board   Wolfgang Denk
      • [U-Boot] [PATCH] ARMV7: Add support for TRATS board   Kim, Heungjun
      • [U-Boot] [PATCH] ARMV7: Add support for TRATS board   Wolfgang Denk
      • [U-Boot] [PATCH] doc: Add Tom Rini to git-mailrc   Igor Grinberg
      • [U-Boot] [PATCH] doc: Add Tom Rini to git-mailrc   Tom Rini
      • [U-Boot] [PATCH] doc: Add Tom Rini to git-mailrc   Wolfgang Denk
• [U-Boot] expection for help with ethernet driver for DP83849   黄金明
  • [U-Boot] expection for help with ethernet driver for DP83849   Kim Phillips
• [U-Boot] [PATCH] common/image.c: align usage of fdt_high with initrd_high   Wolfgang Denk
• [U-Boot] [PATCH] phy: add phy_smsc_init() declaration   Wolfgang Denk
• [U-Boot] [PATCH] fw_env.c: use default env values if config file cannot be opened   Wolfgang Denk
  • [U-Boot] [PATCH] fw_env.c: use default env values if config file cannot be opened   Frans Meulenbroeks
• [U-Boot] [PATCH 1/4] fpga: add definition for Xilinx Spartan-6 XC6SLX4   Wolfgang Denk
• [U-Boot] [PATCH 2/4] FPGA: use debug() instead of module debug printf   Wolfgang Denk
• [U-Boot] [PATCH 3/4] fpga: Spartan-3: let print the progress if configured   Wolfgang Denk
• [U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux   Wolfgang Denk
  • [U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux   Tom Rini
• [U-Boot] [PATCH V3 1/2] ext4fs ls load support   Wolfgang Denk
• [U-Boot] [PATCH V3 2/2] ext4fs write support   Wolfgang Denk
• [U-Boot] [PATCH V3 1/2] ext4fs ls load support   Wolfgang Denk
• [U-Boot] [PATCH] env: factor out the env_get_char_spec() function   Wolfgang Denk
• [U-Boot] [PATCH] [trivial] common.h: remove value from bool defines   Wolfgang Denk
• [U-Boot] [PATCH] [trivial] env: remove value from boolean defines   Wolfgang Denk
• [U-Boot] [PATCH] tools/mkenvimage.c: Fix a merge issue   Wolfgang Denk
• [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Stephen Warren
    • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Simon Glass
      • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Tom Warren
      • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Stephen Warren
      • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Simon Glass
      • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Stephen Warren
      • [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] [PATCH] tools/env: allow overwrite of ethaddr on default   Wolfgang Denk
  • [U-Boot] [PATCH] tools/env: allow overwrite of ethaddr on default   Andreas Bießmann
    • [U-Boot] Toradex Colibri, PXA-270 (ARM)   Daniel Mack
      • [U-Boot] Toradex Colibri, PXA-270 (ARM)   Wolfgang Denk
    • [U-Boot] [PATCH] tools/env: allow overwrite of ethaddr on default   Mike Frysinger
• [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Wolfgang Denk
  • [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
    • [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Wolfgang Denk
      • [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
      • [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Michal Simek
      • [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Wolfgang Denk
      • [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Michal Simek
      • [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
• [U-Boot] [PATCH] ext2: Cache line align indirection buffers   Wolfgang Denk
• [U-Boot] [PATCH v2 1/3] fs/fat: Fix FAT detection to support non-DOS partition tables   Wolfgang Denk
• [U-Boot] [PATCH v2 2/3] fs/fat: Improve error handling   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] usb_storage: Fix EHCI "out of buffer pointers" with CD-ROM   Wolfgang Denk
• [U-Boot] [PATCH] avoid flash writes for new keys, with no values with fw_setenv   Wolfgang Denk
• [U-Boot] [PATCH] FAT: update the second FAT when writing a file   Wolfgang Denk
• [U-Boot] [PATCH v3] cmd_fat: add FAT write command   Wolfgang Denk
• [U-Boot] [PATCH 09/10] Correctly handle input files beginning with several newlines   Wolfgang Denk
• [U-Boot] [PATCHv2 03/10] mkenvimage: Correct the includes and add a missing one   Wolfgang Denk
  • [U-Boot] [PATCHv2 1/8] Strip mkenvimage   David Wagner
  • [U-Boot] [PATCHv3 2/8] mkenvimage: correct and clarify comments and error messages   David Wagner
  • [U-Boot] [PATCHv3 3/8] mkenvimage: Correct the includes and add a missing one   David Wagner
  • [U-Boot] [PATCHv3 3/8] mkenvimage: Correct the includes and add a missing one   Mike Frysinger
  • [U-Boot] [PATCHv4 3/8] mkenvimage: Correct an include and add a missing one   David Wagner
  • [U-Boot] [PATCHv4 3/8] mkenvimage: Correct an include and add a missing one   Mike Frysinger
  • [U-Boot] [PATCHv2 4/8] mkenvimage: More error handling   David Wagner
  • [U-Boot] [PATCHv2 4/8] mkenvimage: More error handling   Mike Frysinger
  • [U-Boot] [PATCHv3 4/8] mkenvimage: More error handling   David Wagner
  • [U-Boot] [PATCHv3 4/8] mkenvimage: More error handling   Mike Frysinger
  • [U-Boot] [PATCHv4 4/8] mkenvimage: More error handling   David Wagner
  • [U-Boot] [PATCHv3 5/8] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"   David Wagner
  • [U-Boot] [PATCHv3 5/8] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"   Mike Frysinger
  • [U-Boot] [PATCHv3 5/8] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"   David Wagner
  • [U-Boot] [PATCHv3 5/8] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"   Mike Frysinger
  • [U-Boot] [PATCHv2 6/8] mkenvimage: Use mmap() when reading from a regular file   David Wagner
  • [U-Boot] [PATCHv2 6/8] mkenvimage: Use mmap() when reading from a regular file   Mike Frysinger
  • [U-Boot] [PATCHv3 6/8] mkenvimage: Use mmap() when reading from a regular file   David Wagner
  • [U-Boot] [PATCHv2 7/8] mkenvimage: Don't try to detect comments in the input file   David Wagner
  • [U-Boot] [PATCHv3 8/8] mkenvimage: Really set the redundant byte when applicable   David Wagner
  • [U-Boot] [PATCHv2 1/8] Strip mkenvimage   Mike Frysinger
• [U-Boot] [PATCH v3 1/2] net: add Calxeda xgmac driver   Wolfgang Denk
• [U-Boot] [PATCH v3 2/2] ARM: highbank: enable networking and pxe   Wolfgang Denk
  • [U-Boot] [PATCH] Fix logic for selection of CONFIG_SYS_DEF_EEPROM_ADDR   Moffett, Kyle D
  • [U-Boot] [PATCH] fw_env.h: fix comment   Frans Meulenbroeks
• [U-Boot] SMSC 9215 MII mode   Bishop, Mark
  • [U-Boot] SMSC 9215 MII mode   Marek Vasut
• [U-Boot] [PATCH v2 1/3] fs/fat: Fix FAT detection to support non-DOS partition tables   Wolfgang Denk
  • [U-Boot] [RFC] [PATCH] DaVinci/i2c: allow multiple buses   Tom Rini
    • [U-Boot] [RFC] [PATCH] DaVinci/i2c: allow multiple buses   Heiko Schocher
      • [U-Boot] [RFC] [PATCH] DaVinci/i2c: allow multiple buses   Jérôme Carretero
• [U-Boot] [PATCH] [trivial] common.h: remove value from bool defines   Wolfgang Denk
• [U-Boot] [PATCH] Fix logic for selection of CONFIG_SYS_DEF_EEPROM_ADDR   Wolfgang Denk
• [U-Boot] AES128 in U-Boot   Mike Frysinger
  • [U-Boot] AES128 in U-Boot   Simon Glass
• [U-Boot] Starting point of uboot learning from scratch..pls help<eom>   Mike Frysinger
• [U-Boot] Uboot build system question   Mike Frysinger
• [U-Boot] [PATCH V5] nand_spl_simple: store ecc data on the stack   Scott Wood
• [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files   Mike Frysinger
  • [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files   Stefan Kristiansson
    • [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files   Mike Frysinger
• [U-Boot] [PATCH] MAKEALL: display SPL size if present   Scott Wood
• [U-Boot] [PATCH] tools/env: fix cross-compilation   Mike Frysinger
  • [U-Boot] [PATCH] tools/env: fix cross-compilation   Grant Erickson
  • [U-Boot] [PATCH] tools/env: fix cross-compilation   Mike Frysinger
• [U-Boot] [PATCH] lib/string: added strndup   Mike Frysinger
  • [U-Boot] [PATCH] lib/string: added strndup   Wolfgang Denk
    • [U-Boot] [PATCH] lib/string: added strndup   Mike Frysinger
• [U-Boot] [PATCH] NAND: remove NAND_MAX_CHIPS definitions   Scott Wood
  • [U-Boot] [PATCH] NAND: remove NAND_MAX_CHIPS definitions   Marek Vasut
• [U-Boot] [PATCH] NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS   Scott Wood
  • [U-Boot] [PATCH v2] Add support for MMC to fw_printenv/setenv   Christian Daudt
    • [U-Boot] [PATCH v2] Add support for MMC to fw_printenv/setenv   Mike Frysinger
      • [U-Boot] [PATCH v4] cmd_fat: add FAT write command   Donggeun Kim
      • [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Simon Glass
      • [U-Boot] [PATCH 1/9] usb: Fix strict-aliasing warning in host/ohci-hcd.c   Simon Glass
      • [U-Boot] [PATCH 1/9] usb: Fix strict-aliasing warning in host/ohci-hcd.c   Mike Frysinger
      • [U-Boot] [PATCH 1/9] usb: Fix strict-aliasing warning in host/ohci-hcd.c   Simon Glass
      • [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc   Simon Glass
      • [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc   Wolfgang Denk
      • [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc   Simon Glass
      • [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc   Wolfgang Denk
      • [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc   Simon Glass
      • [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc   Mike Frysinger
      • [U-Boot] [PATCH 3/9] mpc5xxx: Fix strict-aliasing warnings in usb_ohci.c   Simon Glass
      • [U-Boot] [PATCH 4/9] ppc4xx: Fix strict-aliasing warnings in usb_ohci.c   Simon Glass
      • [U-Boot] [PATCH 5/9] sandbox: sort header files in os.c   Simon Glass
      • [U-Boot] [PATCH 5/9] sandbox: sort header files in os.c   Mike Frysinger
      • [U-Boot] [PATCH 5/9] sandbox: sort header files in os.c   Simon Glass
      • [U-Boot] [PATCH 6/9] sandbox: Add required header to os.c   Simon Glass
      • [U-Boot] [PATCH 6/9] sandbox: Add required header to os.c   Mike Frysinger
      • [U-Boot] [PATCH 6/9] sandbox: Add required header to os.c   Simon Glass
      • [U-Boot] [PATCH 7/9] Remove CONFIG_SYS_EXTBDINFO from snapper9260.h   Simon Glass
      • [U-Boot] [PATCH 8/9] m68k: Change memsz to a signed char to avoid warning   Simon Glass
      • [U-Boot] [PATCH 8/9] m68k: Change memsz to a signed char to avoid warning   Mike Frysinger
      • [U-Boot] [PATCH 9/9] ppc: Change memsz variable to signed char   Simon Glass
      • [U-Boot] [PATCH 9/9] ppc: Change memsz variable to signed char   Mike Frysinger
      • [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Wolfgang Denk
      • [U-Boot] [PATCH 0/9] Fix a few warnings that bug me   Simon Glass
• [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support   Mike Frysinger
  • [U-Boot] Regarding HUSH support in uboot   amruth vamadev
    • [U-Boot] Regarding HUSH support in uboot   Wolfgang Denk
      • [U-Boot] Regarding HUSH support in uboot   amruth vamadev
      • [U-Boot] Regarding HUSH support in uboot   Wolfgang Denk
      • [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs   Govindraj.R
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj.R
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Marek Vasut
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Marek Vasut
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Marek Vasut
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Marek Vasut
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Marek Vasut
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Marek Vasut
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Govindraj
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Stefano Babic
      • [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c   Igor Grinberg
      • [U-Boot] [PATCH v2 4/4] OMAP3+: ehci-omap: enable usb host ports for beagle/panda   Govindraj.R
      • [U-Boot] [PATCH v2 2/4] OMAP3+: Clock: Adding ehci clock enabling   Govindraj.R
      • [U-Boot] [PATCH v2 3/4] OMAP4: clock-common: Move the usb dppl configuration to new func   Govindraj.R
      • [U-Boot] [PATCH] Revert "common.h: remove value from bool defines"   Wolfgang Denk
      • [U-Boot] [PATCH] Revert "common.h: remove value from bool defines"   Wolfgang Denk
      • [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board   Xiangfu Liu
      • [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board   Scott Wood
      • [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board   Xiangfu Liu
      • [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board   Daniel Schwierzeck
      • [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board   Scott Wood
      • [U-Boot] [PATCH v3] add nand spl boot for qi_lb60 board   Xiangfu Liu
      • [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board   Wolfgang Denk
      • [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board   Minkyu Kang
      • [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board   HeungJun, Kim
      • [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board   Wolfgang Denk
      • [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board   Wolfgang Denk
      • [U-Boot] Parameter restriction in mxsboot tool   Robert Deliën
      • [U-Boot] Parameter restriction in mxsboot tool   Marek Vasut
  • [U-Boot] Multi-os on OMAP4430 mp   Clemens Fischer
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Robert Deliën
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Marek Vasut
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Robert Deliën
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Marek Vasut
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Robert Deliën
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Fabio Estevam
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Robert Deliën
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Marek Vasut
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Robert Deliën
    • [U-Boot] Possible Denx m28evk ethernet problem + solution   Marek Vasut
• [U-Boot] [PATCH 05/15] common/main.c: Fix function readline   Mike Frysinger
  • [U-Boot] [PATCH 05/15] common/main.c: Fix function readline   Pali Rohár
    • [U-Boot] [PATCH 1/3] tegra2: Fix conflicting pinmux for UARTA   Stephen Warren
    • [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)   Stephen Warren
    • [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)   Simon Glass
    • [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)   Stephen Warren
    • [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)   Simon Glass
    • [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)   Stephen Warren
    • [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)   Simon Glass
    • [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)   Stephen Warren
    • [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)   Simon Glass
    • [U-Boot] [PATCH 1/3] tegra2: Fix conflicting pinmux for UARTA   Simon Glass
    • [U-Boot] [PATCH 2/3] tegra2: Fix default RAM size selection in odmdata   Stephen Warren
    • [U-Boot] [PATCH 2/3] tegra2: Fix default RAM size selection in odmdata   Simon Glass
    • [U-Boot] [PATCH] ns16550: tegra: Specify debugging serial port at boot.   Stephen Warren
    • [U-Boot] [PATCH] ns16550: tegra: Specify debugging serial port at boot.   Doug Anderson
• [U-Boot] Possible Denx m28evk ethernet problem + solution   Marek Vasut
• [U-Boot] Secure update of uboot devices?   Kim Phillips
  • [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC   Simon Glass
  • [U-Boot] [RFC PATCH v2 01/28] arm: Change board baud_rate to ulong   Simon Glass
  • [U-Boot] [RFC PATCH v2 02/28] x86: Change board baud_rate to ulong   Simon Glass
  • [U-Boot] [RFC PATCH v2 03/28] arm: Only display frame buffer info if there is LCD/video support   Simon Glass
  • [U-Boot] [RFC PATCH v2 03/28] arm: Only display frame buffer info if there is LCD/video support   Albert ARIBAUD
  • [U-Boot] [RFC PATCH v2 04/28] x86: Remove compiler warning in sc520_timer.c   Simon Glass
  • [U-Boot] [RFC PATCH v2 05/28] x86: Remove dead code in eNET   Simon Glass
  • [U-Boot] [RFC PATCH v2 06/28] x86: Add initial memory barrier macros   Simon Glass
  • [U-Boot] [RFC PATCH v2 07/28] ppc: Add initial memory barrier macros   Simon Glass
  • [U-Boot] [RFC PATCH v2 08/28] Introduce generic global_data   Simon Glass
  • [U-Boot] [RFC PATCH v2 09/28] Introduce generic u-boot.h file   Simon Glass
  • [U-Boot] [RFC PATCH v2 10/28] Introduce generic link symbol file   Simon Glass
  • [U-Boot] [RFC PATCH v2 11/28] arm: Use sections header to obtain link symbols   Simon Glass
  • [U-Boot] [RFC PATCH v2 12/28] x86: Change stub example to use asm-generic/sections.h   Simon Glass
  • [U-Boot] [RFC PATCH v2 13/28] Introduce a basic initcall implementation   Simon Glass
  • [U-Boot] [RFC PATCH v2 14/28] Define CONFIG_SYS_LEGACY_BOARD everywhere   Simon Glass
  • [U-Boot] [RFC PATCH v2 15/28] Introduce generic pre-relocation board_f.c   Simon Glass
  • [U-Boot] [RFC PATCH v2 16/28] Introduce generic post-relocation board_r.c   Simon Glass
  • [U-Boot] [RFC PATCH v2 17/28] Add spl load feature   Simon Glass
  • [U-Boot] [RFC PATCH v2 18/28] arm: Enable generic board support   Simon Glass
  • [U-Boot] [RFC PATCH v2 19/28] Add CONFIG_SYS_SYM_OFFSETS to support offset symbols   Simon Glass
  • [U-Boot] [RFC PATCH v2 20/28] x86: Use sections header to obtain link symbols   Simon Glass
  • [U-Boot] [RFC PATCH v2 21/28] Add x86 fields to generic global_data   Simon Glass
  • [U-Boot] [RFC PATCH v2 22/28] x86: Enable generic board support   Simon Glass
  • [U-Boot] [RFC PATCH v2 23/28] Add ppc fields to generic global data   Simon Glass
  • [U-Boot] [RFC PATCH v2 24/28] Adjust board_f for ppc   Simon Glass
  • [U-Boot] [RFC PATCH v2 25/28] Adjust board_r.c for PowerPC   Simon Glass
  • [U-Boot] [RFC PATCH v2 26/28] ppc: Enable generic board board   Simon Glass
  • [U-Boot] [RFC PATCH v2 27/28] tegra: Mark board init files for ARMv4t   Simon Glass
  • [U-Boot] [RFC PATCH v2 27/28] tegra: Mark board init files for ARMv4t   Stephen Warren
  • [U-Boot] [RFC PATCH v2 27/28] tegra: Mark board init files for ARMv4t   Simon Glass
  • [U-Boot] [RFC PATCH v2 28/28] tegra: Enable generic board for Seaboard.   Simon Glass
  • [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC   Simon Glass
  • [U-Boot] [PATCH] Remove execute permissions from source files   Thomas Weber
  • [U-Boot] [PATCH] Remove execute permissions from source files   Mike Frysinger
• [U-Boot] I want to recommend a good website to you   mike zenon
  • [U-Boot] [PATCH v2] common/image.c: align usage of fdt_high with initrd_high   Shawn Guo
  • [U-Boot] [PATCH v2] common/image.c: align usage of fdt_high with initrd_high   Shawn Guo
  • [U-Boot] [RFC PATCH 01/19] Introduce generic global_data   Simon Glass
    • [U-Boot] [RFC PATCH 01/19] Introduce generic global_data   Graeme Russ
      • [U-Boot] [RFC PATCH 01/19] Introduce generic global_data   Simon Glass
      • [U-Boot] [RFC PATCH 01/19] Introduce generic global_data   Andreas Bießmann
      • [U-Boot] [RFC PATCH 01/19] Introduce generic global_data   Simon Glass
    • [U-Boot] initcall revisited - A new idea to discuss   Simon Glass
      • [U-Boot] initcall revisited - A new idea to discuss   Graeme Russ
• [U-Boot] [PATCH V3 2/2] ext4fs write support   Mike Frysinger
• [U-Boot] [PATCH V3 1/2] ext4fs ls load support   Mike Frysinger
• [U-Boot] [PATCH] Add a CBFS driver and commands to u-boot   Mike Frysinger
• [U-Boot] [PATCH 2/2] usb/gadget: add the fastboot gadget   Mike Frysinger
• [U-Boot] [PATCH] x86: Set up the PCI busses when initializing the coreboot "board"   Mike Frysinger
• [U-Boot] [PATCH 2/4] dfu: generic backend parts   Mike Frysinger
  • [U-Boot] [PATCH 2/4] dfu: generic backend parts   Andrzej Pietrasiewicz
    • [U-Boot] [PATCH 2/4] dfu: generic backend parts   Mike Frysinger
• [U-Boot] [PATCH v3] Add 'patman' patch generation, checking and submission script   Mike Frysinger
  • [U-Boot] [PATCH v3] Add 'patman' patch generation, checking and submission script   Simon Glass
• [U-Boot] [PATCH 3/4] x86: Force the lib_sysinfo structure to be in the .data section   Mike Frysinger
• [U-Boot] [PATCH 01/14] Add AES crypto library   Mike Frysinger
  • [U-Boot] [PATCH 01/14] Add AES crypto library   Marek Vasut
    • [U-Boot] [PATCH 01/14] Add AES crypto library   Mike Frysinger
      • [U-Boot] [PATCH 01/14] Add AES crypto library   Marek Vasut
      • [U-Boot] [PATCH 01/14] Add AES crypto library   Simon Glass
• [U-Boot] [PATCH 03/14] tegra: Add crypto library for warmboot code   Mike Frysinger
  • [U-Boot] [PATCH 03/14] tegra: Add crypto library for warmboot code   Simon Glass
• [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Mike Frysinger
  • [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Simon Glass
• [U-Boot] [PATCH 2/2] api: storage: Share attributes with block_dev_desc   Mike Frysinger
• [U-Boot] [RFC PATCH v2 02/15] bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress()   Mike Frysinger
• [U-Boot] [RFC PATCH v2 01/15] bootstage: Create an initial header for boot progress integers   Mike Frysinger
  • [U-Boot] [RFC PATCH v2 01/15] bootstage: Create an initial header for boot progress integers   Simon Glass
  • [U-Boot] [RFC PATCH v2 01/15] bootstage: Create an initial header for boot progress integers   Mike Frysinger
  • [U-Boot] [RFC PATCH v2 01/15] bootstage: Create an initial header for boot progress integers   Simon Glass
• [U-Boot] [RFC PATCH v2 03/15] bootstage: Use show_boot_error() for -ve progress numbers   Mike Frysinger
• [U-Boot] [RFC PATCH v2 04/15] bootstage: Convert progress numbers 1-9 into enums   Mike Frysinger
  • [U-Boot] [RFC PATCH v2 04/15] bootstage: Convert progress numbers 1-9 into enums   Simon Glass
• [U-Boot] [RFC PATCH v2 05/15] bootstage: Convert progress numbers 10-19 to enums   Mike Frysinger
  • [U-Boot] [RFC PATCH v2 05/15] bootstage: Convert progress numbers 10-19 to enums   Simon Glass
• [U-Boot] [RFC PATCH v2 11/15] bootstage: Define an optional microsecond timer   Mike Frysinger
  • [U-Boot] [RFC PATCH v2 11/15] bootstage: Define an optional microsecond timer   Simon Glass
  • [U-Boot] [RFC PATCH v2 11/15] bootstage: Define an optional microsecond timer   Mike Frysinger
  • [U-Boot] [RFC PATCH v2 11/15] bootstage: Define an optional microsecond timer   Simon Glass
• [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Mike Frysinger
  • [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Simon Glass
    • [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Mike Frysinger
      • [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Simon Glass
      • [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Mike Frysinger
      • [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Simon Glass
      • [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Mike Frysinger
      • [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Simon Glass
• [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm   Mike Frysinger
  • [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm   Simon Glass
    • [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm   Mike Frysinger
      • [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm   Simon Glass
      • [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm   Mike Frysinger
      • [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm   Simon Glass
• [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled   Mike Frysinger
  • [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled   Andy Fleming
• [U-Boot] [PATCH v3 03/16] Add gpio_request() to asm-generic header   Mike Frysinger
  • [U-Boot] [PATCH v3 03/16] Add gpio_request() to asm-generic header   Kim Phillips
• [U-Boot] [PATCH] sandbox: Add tap based networking   Mike Frysinger
  • [U-Boot] [PATCH] lzma: fix printf warnings   Mike Frysinger
  • [U-Boot] [PATCH] Blackfin: add in/out le32 variants   Mike Frysinger
  • [U-Boot] [PATCH] post: add blackfin to the post_time_ms list   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: br4: new board port   Mike Frysinger
  • [U-Boot] [PATCH v2] Blackfin: pr1: new board port   Mike Frysinger
  • [U-Boot] [PATCH v2] Blackfin: pr1: new board port   Dimitar Penev
  • [U-Boot] [PATCH v2] Blackfin: br4: new board port   Mike Frysinger
  • [U-Boot] [PATCH v2] Blackfin: br4: new board port   Dimitar Penev
• [U-Boot] Porting board from FSL to mainline U-Boot   stefano babic
• [U-Boot] v2011.12 and later do not boot on dreamplug.   Ian Campbell
  • [U-Boot] v2011.12 and later do not boot on dreamplug.   Ian Campbell
  • [U-Boot] v2011.12 and later do not boot on dreamplug.   Ian Campbell
    • [U-Boot] v2011.12 and later do not boot on dreamplug.   Jason
      • [U-Boot] v2011.12 and later do not boot on dreamplug.   Ian Campbell
      • [U-Boot] v2011.12 and later do not boot on dreamplug.   Jason
    • [U-Boot] Bug#655102: v2011.12 and later do not boot on dreamplug.   Holger Brunck
      • [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register   Ian Campbell
      • [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register   Prafulla Wadaskar
      • [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register   Ian Campbell
      • [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register   Ian Campbell
• [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Simon Glass
  • [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Marek Vasut
    • [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Simon Glass
  • [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled   Andy Fleming
    • [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled   Simon Glass
      • [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
      • [U-Boot] Please pull u-boot-mmc.git   Wolfgang Denk
• [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.   Andy Fleming
  • [U-Boot] [PATCH] fsl_esdhc: fix PIO mode transfers   Andy Fleming
  • [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support   Chander Kashyap
  • [U-Boot] [PATCH v2 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro   Chander Kashyap
  • [U-Boot] [PATCH v2 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Chander Kashyap
  • [U-Boot] [PATCH v2 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Minkyu Kang
  • [U-Boot] [PATCH v2 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Chander Kashyap
  • [U-Boot] [PATCH v2 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
  • [U-Boot] [PATCH v2 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
  • [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support   Simon Glass
  • [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support   Chander Kashyap
  • [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support   Kyungmin Park
  • [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support   Chander Kashyap
  • [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support   Wolfgang Denk
  • [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support   Chander Kashyap
  • [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support   HeungJun, Kim
  • [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH v4] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
  • [U-Boot] [PATCH v4] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Stefano Babic
• [U-Boot] [PING] Re: [PATCH V3] ARM: fix s3c2410 timer code   "David Müller (ELSOFT AG)"
• [U-Boot] [PING] Re: [PATCH] ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board   "David Müller (ELSOFT AG)"
• [U-Boot] [PING] Re: [PATCH 0/4] use CFI driver for all MPL boards   "David Müller (ELSOFT AG)"
• [U-Boot] [PATCH v2 1/3] image: add support for Android's boot image format   Sebastian Andrzej Siewior
• [U-Boot] [PATCH 0/4] use CFI driver for all MPL boards   Stefan Roese
• [U-Boot] [PATCH V3] ARM: fix s3c2410 timer code   Andreas Bießmann
• [U-Boot] OMAP3 performance regression in 2011.12   Joe Woodward
  • [U-Boot] OMAP3 performance regression in 2011.12   Tom Rini
    • [U-Boot] OMAP3 performance regression in 2011.12   Joe Woodward
    • [U-Boot] OMAP3 performance regression in 2011.12   Joe Woodward
    • [U-Boot] OMAP3 performance regression in 2011.12   Aneesh V
    • [U-Boot] OMAP3 performance regression in 2011.12   Måns Rullgård
• [U-Boot] net: re-enumerating usb-ethernet devices hangs the system   Wolfgang Grandegger
  • [U-Boot] net: re-enumerating usb-ethernet devices hangs the system   Vincent Palatin
    • [U-Boot] [PATCH 1/4] PXA: PXA27x Matrix keypad driver   Vasily Khoruzhick
    • [U-Boot] [PATCH 4/4] zipitz2: fix boot issue introduced by PXA low level init rework   Vasily Khoruzhick
    • [U-Boot] [PATCH 2/4] zipitz2: enable pxa27x_mkp driver   Vasily Khoruzhick
    • [U-Boot] [PATCH 3/4] zipitz2: use pxa_mmc_gen as MMC driver   Vasily Khoruzhick
• [U-Boot] [PATCH 1/4] PXA: PXA27x Matrix keypad driver   Marek Vasut
• [U-Boot] [PATCH 2/4] zipitz2: enable pxa27x_mkp driver   Marek Vasut
• [U-Boot] [PATCH 3/4] zipitz2: use pxa_mmc_gen as MMC driver   Marek Vasut
• [U-Boot] [PATCH 4/4] zipitz2: fix boot issue introduced by PXA low level init rework   Marek Vasut
  • [U-Boot] Add ext4 write support   uma.shankar at samsung.com
  • [U-Boot] [PATCH V4 0/2] *** Add ext4 filesystem support in uboot ***   uma.shankar at samsung.com
  • [U-Boot] Add ext4 write support   Kim Phillips
  • [U-Boot] Add ext4 write support   Mike Frysinger
  • [U-Boot] [PATCH V4 1/2] ext4fs ls load support   uma.shankar at samsung.com
  • [U-Boot] [PATCH V4 2/2] ext4fs write support   uma.shankar at samsung.com
  • [U-Boot] [PATCH V4 2/2] ext4fs write support   Mike Frysinger
  • [U-Boot] [PATCH V4 2/2] ext4fs write support   Wolfgang Denk
  • [U-Boot] [PATCH V4 2/2] ext4fs write support   Mike Frysinger
  • [U-Boot] [PATCH 1/2] Flush the date cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2] Flush the date cache before disabling it.   Mike Frysinger
  • [U-Boot] [PATCH 1/2] Flush the date cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Marek Vasut
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Marek Vasut
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Marek Vasut
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Marek Vasut
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Marek Vasut
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Marek Vasut
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Marek Vasut
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Marek Vasut
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Tom Rini
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Heiko Schocher
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Aneesh V
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Heiko Schocher
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Tom Rini
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Heiko Schocher
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Tom Rini
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Aneesh V
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Aneesh V
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Aneesh V
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Aneesh V
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Aneesh V
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Tom Rini
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Heiko Schocher
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Tom Rini
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Christian Riesch
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Tom Rini
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Heiko Schocher
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2 V4] arm926: Flush the data cache before disabling it   Sughosh Ganu
  • [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.   James W.
  • [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.   Sughosh Ganu
  • [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.   Tom Rini
  • [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.   Sughosh Ganu
  • [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.   Christian Riesch
  • [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.   Sughosh Ganu
  • [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.   Heiko Schocher
  • [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.   Sughosh Ganu
  • [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.   Sughosh Ganu
  • [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.   Heiko Schocher
  • [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.   Sughosh Ganu
  • [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.   Christian Riesch
  • [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.   Christian Riesch
  • [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.   Heiko Schocher
  • [U-Boot] [PATCH 2/2 V3] Changes to move hawkboard to the new spl infrastructure.   Sughosh Ganu
  • [U-Boot] [PATCH 2/2 V3] Changes to move hawkboard to the new spl infrastructure.   Christian Riesch
  • [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure   Sughosh Ganu
  • [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure   Heiko Schocher
  • [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure   Sughosh Ganu
  • [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure   Christian Riesch
  • [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure   Christian Riesch
  • [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure   Sughosh Ganu
  • [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure   Christian Riesch
  • [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them   Vincent Palatin
  • [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them   Marek Vasut
  • [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them   Vincent Palatin
  • [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them   Wolfgang Grandegger
  • [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them   Marek Vasut
  • [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them   Remy Bohmer
  • [U-Boot] [PATCH] USB: fix USB keyboard polling parameter   Vincent Palatin
  • [U-Boot] [PATCH] USB: fix USB keyboard polling parameter   Marek Vasut
  • [U-Boot] [PATCH] USB: fix USB keyboard polling parameter   Vincent Palatin
  • [U-Boot] [PATCH] USB: fix USB keyboard polling parameter   Marek Vasut
  • [U-Boot] [PATCH] USB: fix USB keyboard polling parameter   Remy Bohmer
• [U-Boot] [PATCH] mx28: fix clearing of IRQs in power init   Zach Sadecki
• [U-Boot] [PATCH] mx28: fix clearing of IRQs in power init   Zach Sadecki
  • [U-Boot] [PATCH] mx28: fix clearing of IRQs in power init   Marek Vasut
  • [U-Boot] [PATCH] mx28: fix clearing of IRQs in power init   Stefano Babic
• [U-Boot] [PATCH 1/7] tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE   Stephen Warren
• [U-Boot] [PATCH 3/7] tegra: Add I2C support to funcmux   Stephen Warren
  • [U-Boot] [PATCH 3/7] tegra: Add I2C support to funcmux   Simon Glass
    • [U-Boot] [PATCH 3/7] tegra: Add I2C support to funcmux   Simon Glass
• [U-Boot] [PATCH 6/7] tegra: Select I2C ordering for Seaboard   Stephen Warren
• [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard   Stephen Warren
• [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Stephen Warren
  • [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Simon Glass
    • [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Stephen Warren
    • [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Heiko Schocher
    • [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Simon Glass
    • [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Heiko Schocher
    • [U-Boot] [PATCH v2 5/9] sandbox: sort header files in os.c   Simon Glass
    • [U-Boot] [PATCH v2 6/9] sandbox: Add required header to os.c   Simon Glass
    • [U-Boot] [PATCH v2 5/9] sandbox: sort header files in os.c   Mike Frysinger
    • [U-Boot] [PATCH v2 5/9] sandbox: sort header files in os.c   Simon Glass
    • [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC   Simon Glass
    • [U-Boot] [PATCH 1/7] tegra: Adjust funcmux config test to permit expansion   Simon Glass
    • [U-Boot] [PATCH 2/7] tegra: Add I2C support to funcmux   Simon Glass
    • [U-Boot] [PATCH 3/7] tegra: Enhance funcmux to support options   Simon Glass
    • [U-Boot] [PATCH 4/7] tegra: Add SDMMC support to funcmux   Simon Glass
    • [U-Boot] [PATCH 5/7] tegra: Use funcmux for MMC on tamonten   Simon Glass
    • [U-Boot] [PATCH 5/7] tegra: Use funcmux for MMC on tamonten   Thierry Reding
    • [U-Boot] [PATCH 5/7] tegra: Use funcmux for MMC on tamonten   Simon Glass
    • [U-Boot] [PATCH 6/7] tegra: Use funcmux for MMC on harmony   Simon Glass
    • [U-Boot] [PATCH 7/7] tegra: Use funcmux for MMC on seaboard   Simon Glass
    • [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC   Stephen Warren
    • [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC   Simon Glass
    • [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC   Stephen Warren
    • [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC   Simon Glass
    • [U-Boot] [PATCH] usb: add numeric keypad support to HID driver   Vincent Palatin
    • [U-Boot] [PATCH] usb: add numeric keypad support to HID driver   Marek Vasut
    • [U-Boot] [PATCH] usb: add numeric keypad support to HID driver   Vincent Palatin
    • [U-Boot] [PATCH] usb: add numeric keypad support to HID driver   Remy Bohmer
    • [U-Boot] [PATCH v2] tegra: mmc: Support operation with dcache enabled   Simon Glass
    • [U-Boot] [PATCH v2] tegra: mmc: Support operation with dcache enabled   Stephen Warren
    • [U-Boot] [PATCH v3] tegra2: Enable data cache   Simon Glass
    • [U-Boot] [PATCH v3] tegra2: Enable data cache   Stephen Warren
• [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU   Stephen Warren
  • [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU   Simon Glass
    • [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU   Stephen Warren
      • [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU   Simon Glass
• [U-Boot] [PATCH 06/14] tegra: Add EMC support for optimal memory timings   Stephen Warren
  • [U-Boot] [PATCH 06/14] tegra: Add EMC support for optimal memory timings   Simon Glass
    • [U-Boot] [PATCH 06/14] tegra: Add EMC support for optimal memory timings   Simon Glass
• [U-Boot] [PATCH 1/4] powerpc/83xx/km: update SDRAM parameters for km8321 boards   Kim Phillips
• [U-Boot] [GIT PULL] Please pull u-boot-mpc83xx: new 8321 tuge1, GPIO support, fixes   Kim Phillips
  • [U-Boot] [GIT PULL] Please pull u-boot-mpc83xx: new 8321 tuge1, GPIO support, fixes   Wolfgang Denk
    • [U-Boot] [PATCH v4 0/5] Added SPL support   Chandan Nath
    • [U-Boot] [PATCH v4 5/5] ARM:AM33XX: Add SPL support for AM335X EVM   Chandan Nath
    • [U-Boot] [PATCH v4 5/5] ARM:AM33XX: Add SPL support for AM335X EVM   Igor Grinberg
    • [U-Boot] [PATCH v4 0/5] Added SPL support   Tom Rini
    • [U-Boot] [PATCH v4 1/5] ARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX   Chandan Nath
    • [U-Boot] [PATCH v4 1/5] ARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX   Thomas Weber
    • [U-Boot] [PATCH v4 2/5] ARM:AM33XX: Fix ddr and timer register offset   Chandan Nath
    • [U-Boot] [PATCH v4 3/5] ARM:AM33XX: Fixing AM335X config parameters   Chandan Nath
    • [U-Boot] [PATCH v4 4/5] ARM:AM33XX: Add mmc/sd support   Chandan Nath
    • [U-Boot] [PATCH] da850evm: drop NET_MULTI reference   Prabhakar Lad
    • [U-Boot] [PATCH] da850evm: drop NET_MULTI reference   Christian Riesch
    • [U-Boot] [PATCH] da850evm: drop NET_MULTI reference   Prabhakar Lad
    • [U-Boot] [PATCH] da850evm: drop NET_MULTI reference   Mike Frysinger
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
  • [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
    • [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high   Shawn Guo
    • [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high   Shawn Guo
    • [U-Boot] [PATCH] imx: mx6q: add aipstz init for off platform periph   Jason Liu
    • [U-Boot] [PATCH] imx: mx6q: add aipstz init for off platform periph   Stefano Babic
    • [U-Boot] [PATCH 1/8] powerpc/srio: Correct the register defined errors in the struct ccsr_rio_t   Liu Gang
    • [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO   Liu Gang
    • [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO   Tabi Timur-B04825
    • [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO   Liu Gang-B34182
    • [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO   Wolfgang Denk
    • [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO   Liu Gang
    • [U-Boot] [PATCH 7/8] powerpc/boot: Slave reads ENV from master when boot from SRIO   Liu Gang
    • [U-Boot] [PATCH 8/8] powerpc/boot: Slave core in holdoff when boot from SRIO   Liu Gang
    • [U-Boot] [PATCH 1/8] powerpc/srio: Correct the register defined errors in the struct ccsr_rio_t   Wolfgang Denk
    • [U-Boot] [PATCH 1/8] powerpc/srio: Correct the register defined errors in the struct ccsr_rio_t   Kumar Gala
    • [U-Boot] [PATCH 1/8] powerpc/srio: Correct the register defined errors in the struct ccsr_rio_t   Liu Gang
    • [U-Boot] [PATCH 2/8] powerpc/env: Correct the compilation errors when defined CONFIG_ENV_IS_NOWHERE   Liu Gang
    • [U-Boot] [PATCH 2/8] powerpc/env: Correct the compilation errors when defined CONFIG_ENV_IS_NOWHERE   Tabi Timur-B04825
    • [U-Boot] [PATCH 2/8] powerpc/env: Correct the compilation errors when defined CONFIG_ENV_IS_NOWHERE   Liu Gang-B34182
    • [U-Boot] [PATCH 2/8] powerpc/env: Correct the compilation errors when defined CONFIG_ENV_IS_NOWHERE   Wolfgang Denk
    • [U-Boot] [PATCH 3/8] powerpc/boot: Document for the boot from SRIO   Liu Gang
    • [U-Boot] [PATCH 4/8] powerpc/boot: Master module for boot from SRIO   Liu Gang
    • [U-Boot] [PATCH 4/8] powerpc/boot: Master module for boot from SRIO   Wolfgang Denk
    • [U-Boot] [PATCH 4/8] powerpc/boot: Master module for boot from SRIO   Liu Gang
    • [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO   Liu Gang
    • [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO   Tabi Timur-B04825
    • [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO   Liu Gang-B34182
    • [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO   Wolfgang Denk
    • [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO   Liu Gang
    • [U-Boot] [PATCH] arm, davinci: Add support for the Calimain board from OMICRON electronics   Christian Riesch
    • [U-Boot] [PATCH] arm, davinci: Add support for the Calimain board from OMICRON electronics   Tom Rini
    • [U-Boot] [PATCH] arm, davinci: Add support for the Calimain board from OMICRON electronics   Heiko Schocher
    • [U-Boot] [PATCH] arm, davinci: Add support for the Calimain board from OMICRON electronics   Christian Riesch
• [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Fabio Estevam
  • [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Dirk Behme
    • [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Stefano Babic
• [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies   Stephen Warren
  • [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies   Simon Glass
    • [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies   Stephen Warren
      • [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies   Simon Glass
• [U-Boot] [PATCH 08/14] tegra: Set up PMU for Nvidia boards   Stephen Warren
  • [U-Boot] [PATCH 08/14] tegra: Set up PMU for Nvidia boards   Simon Glass
• [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation   Stephen Warren
  • [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation   Simon Glass
  • [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation   Yen Lin
• [U-Boot] [PATCH 12/14] tegra: Set vdd_core and vdd_cpu to high   Stephen Warren
  • [U-Boot] [PATCH 12/14] tegra: Set vdd_core and vdd_cpu to high   Simon Glass
• [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony   Stephen Warren
  • [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony   Simon Glass
    • [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony   Stephen Warren
      • [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony   Simon Glass
      • [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony   Stephen Warren
      • [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony   Simon Glass
      • [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony   Stephen Warren
      • [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony   Simon Glass
      • [U-Boot] [PATCH 1/3] m28evk: Remove CONFIG_NET_MULTI option   Fabio Estevam
      • [U-Boot] [PATCH 2/3] efika0: Remove CONFIG_NET_MULTI option   Fabio Estevam
      • [U-Boot] [PATCH v2 2/3] efika: Remove CONFIG_NET_MULTI option   Fabio Estevam
      • [U-Boot] [PATCH v2 2/3] efika: Remove CONFIG_NET_MULTI option   Marek Vasut
      • [U-Boot] [PATCH 3/3] flea3: Remove CONFIG_NET_MULTI option   Fabio Estevam
      • [U-Boot] [PATCH 1/3] m28evk: Remove CONFIG_NET_MULTI option   Marek Vasut
      • [U-Boot] [PATCH 1/3] m28evk: Remove CONFIG_NET_MULTI option   Fabio Estevam
      • [U-Boot] [PATCH 1/3] m28evk: Remove CONFIG_NET_MULTI option   Stefano Babic
      • [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Doug Anderson
      • [U-Boot] [PATCH 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Doug Anderson
      • [U-Boot] [PATCH 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Doug Anderson
      • [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Mike Frysinger
      • [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Doug Anderson
      • [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Mike Frysinger
      • [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Wolfgang Denk
      • [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Doug Anderson
      • [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Wolfgang Denk
      • [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Doug Anderson
      • [U-Boot] [PATCH v3 0/3] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Doug Anderson
      • [U-Boot] [PATCH v3 1/3] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Doug Anderson
      • [U-Boot] [PATCH v3 2/3] bootm: Move silencing of linux console to deprecated config option.   Doug Anderson
      • [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Doug Anderson
      • [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Mike Frysinger
      • [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Doug Anderson
      • [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Mike Frysinger
      • [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Doug Anderson
      • [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Mike Frysinger
      • [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Wolfgang Denk
      • [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Doug Anderson
      • [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Wolfgang Denk
      • [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Doug Anderson
      • [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Wolfgang Denk
      • [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.   Doug Anderson
      • [U-Boot] [PATCH v2 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Doug Anderson
      • [U-Boot] [PATCH v2 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Mike Frysinger
      • [U-Boot] [PATCH v2 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE   Wolfgang Denk
      • [U-Boot] [PATCH v2 2/2] bootm: Move silencing of linux console to deprecated config option.   Doug Anderson
      • [U-Boot] [PATCH v2 2/2] bootm: Move silencing of linux console to deprecated config option.   Wolfgang Denk
      • [U-Boot] [PATCH 2/2] bootm: Move silencing of linux console to deprecated config option.   Doug Anderson
      • [U-Boot] [PATCH 2/2] bootm: Move silencing of linux console to deprecated config option.   Wolfgang Denk
      • [U-Boot] [PATCH 2/2] bootm: Move silencing of linux console to deprecated config option.   Mike Frysinger
• [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Stephen Warren
  • [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Simon Glass
    • [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Stephen Warren
      • [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Simon Glass
• [U-Boot] [PATCH v2 2/2] bootm: Move silencing of linux console to deprecated config option.   Mike Frysinger
• [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Wolfgang Denk
  • [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Doug Anderson
    • [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Mike Frysinger
  • [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Mike Frysinger
• [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack   Scott Wood
  • [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack   Tom Rini
  • [U-Boot] [PATCH] cmd_source: introduce run_script()   Michael Walle
  • [U-Boot] [PATCH] cmd_source: introduce run_script()   Mike Frysinger
  • [U-Boot] [PATCH] cmd_source: introduce run_script()   Michael Walle
  • [U-Boot] [PATCH] cmd_source: introduce run_script()   Michael Walle
  • [U-Boot] [PATCH] cmd_source: introduce run_script()   Michael Walle
• [U-Boot] [PATCH v2 1/8] nand: Merge BCH code from Linux nand driver   Scott Wood
• [U-Boot] [PATCH v2 2/8] nand: Add more NAND types from Linux nand driver   Scott Wood
• [U-Boot] [PATCH v2 3/8] nand: cleanup whitespace   Scott Wood
• [U-Boot] [PATCH v2 4/8] nand: Merge changes from Linux nand driver   Scott Wood
• [U-Boot] [PATCH v2 6/8] nand: Merge changes to BBT from Linux nand driver   Scott Wood
• [U-Boot] [PATCH v2 7/8] nand: Sanitize ONFI strings.   Scott Wood
• [U-Boot] [PATCH 4/5 v2] mtd/nand: Add ONFI support for FSL NAND controller   Scott Wood
  • [U-Boot] [PATCH v3 5/9] sandbox: sort header files in os.c   Simon Glass
  • [U-Boot] [PATCH v3 6/9] sandbox: Add required header to os.c   Simon Glass
  • [U-Boot] [PATCH v3 6/9] sandbox: Add required header to os.c   Mike Frysinger
  • [U-Boot] [PATCH v3 5/9] sandbox: sort header files in os.c   Mike Frysinger
  • [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Simon Glass
  • [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options   Simon Glass
  • [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options   Mike Frysinger
  • [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options   Simon Glass
  • [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options   Mike Frysinger
  • [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Simon Glass
  • [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Mike Frysinger
  • [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Simon Glass
  • [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Mike Frysinger
  • [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Mike Frysinger
  • [U-Boot] [PATCH v2 4/8] sandbox: Enable GPIO driver   Simon Glass
  • [U-Boot] [PATCH v2 4/8] sandbox: Enable GPIO driver   Mike Frysinger
  • [U-Boot] [PATCH v2 4/8] sandbox: Enable GPIO driver   Simon Glass
  • [U-Boot] [PATCH v2 5/8] sandbox: Add concept of sandbox state   Simon Glass
  • [U-Boot] [PATCH v2 6/8] sandbox: Allow processing instead of or before main loop   Simon Glass
  • [U-Boot] [PATCH v2 6/8] sandbox: Allow processing instead of or before main loop   Mike Frysinger
  • [U-Boot] [PATCH v2 6/8] sandbox: Allow processing instead of or before main loop   Simon Glass
  • [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call   Simon Glass
  • [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call   Mike Frysinger
  • [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call   Simon Glass
  • [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call   Mike Frysinger
  • [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call   Simon Glass
  • [U-Boot] [PATCH v2 8/8] sandbox: Add basic command line parsing   Simon Glass
  • [U-Boot] [PATCH v2 8/8] sandbox: Add basic command line parsing   Mike Frysinger
  • [U-Boot] [PATCH v2 8/8] sandbox: Add basic command line parsing   Simon Glass
  • [U-Boot] [PATCH v2 8/8] sandbox: Add basic command line parsing   Mike Frysinger
  • [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Mike Frysinger
  • [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Simon Glass
  • [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Mike Frysinger
• [U-Boot] [PATCH v2] linkage.h: move from blackfin to common includes   Mike Frysinger
  • [U-Boot] [PATCH v2] linkage.h: move from blackfin to common includes   Macpaul Lin
• [U-Boot] [PATCH 1/3] linkage.h: move from blackfin to common includes   Fabio Estevam
  • [U-Boot] [PATCH 1/3] linkage.h: move from blackfin to common includes   Mike Frysinger
• [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO   Tabi Timur-B04825
  • [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO   Liu Gang-B34182
• [U-Boot] [PATCH I2C] fix: error ATMEL_FIO_BASE undeclared, if use I2C_Soft on AT91   Heiko Schocher
• [U-Boot] [GIT PULL] Pull request: i2c   Heiko Schocher
  • [U-Boot] [GIT PULL] Pull request: i2c   Wolfgang Denk
• [U-Boot] [PATCH v4] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Stefano Babic
  • [U-Boot] Help needed on Colibri T20 - Iris Board   Stéphane Carvalho
    • [U-Boot] Help needed on Colibri T20 - Iris Board   Wolfgang Denk
      • [U-Boot] Help needed on Colibri T20 - Iris Board   Marek Vasut
      • [U-Boot] Help needed on Colibri T20 - Iris Board   Simon Glass
      • [U-Boot] Help needed on Colibri T20 - Iris Board   Stéphane Carvalho
      • [U-Boot] Help needed on Colibri T20 - Iris Board   Simon Glass
• [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Dirk Behme
  • [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Simon Glass
    • [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Stefan Roese
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Fabio Estevam
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Marek Vasut
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Heiko Schocher
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Kumar Gala
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Stefano Babic
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Tom Rini
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Stefano Babic
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Mike Frysinger
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Stefano Babic
    • [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files   Mike Frysinger
    • [U-Boot] [PATCH v2] configs: Remove CONFIG_NET_MULTI from board files   Fabio Estevam
    • [U-Boot] [PATCH v2] configs: Remove CONFIG_NET_MULTI from board files   Tom Rini
    • [U-Boot] [PATCH v2] configs: Remove CONFIG_NET_MULTI from board files   Mike Frysinger
    • [U-Boot] [PATCH v2] configs: Remove CONFIG_NET_MULTI from board files   Stefano Babic
    • [U-Boot] [PATCH v3 0/4] Add SMDK5250 board support   Chander Kashyap
    • [U-Boot] [PATCH v3 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro   Chander Kashyap
    • [U-Boot] [PATCH v3 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Chander Kashyap
    • [U-Boot] [PATCH v3 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Minkyu Kang
    • [U-Boot] [PATCH v3 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
    • [U-Boot] [PATCH v3 3/4] EXYNOS: Add SMDK5250 board support   Minkyu Kang
    • [U-Boot] [PATCH v3 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
    • [U-Boot] [PATCH v3 3/4] EXYNOS: Add SMDK5250 board support   Wolfgang Denk
    • [U-Boot] [PATCH v3 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
    • [U-Boot] [PATCH V3] mmc: access mxcmmc from mx31 boards   Helmut Raiger
    • [U-Boot] [PATCH 1/2] mmc: access mxcmmc from mx31 boards   Helmut Raiger
    • [U-Boot] [PATCH 1/2] mmc: access mxcmmc from mx31 boards   Stefano Babic
    • [U-Boot] [PATCH 1/2] mmc: access mxcmmc from mx31 boards   Stefano Babic
    • [U-Boot] [PATCH 2/2] tt01: add MMC support   Helmut Raiger
    • [U-Boot] [PATCH 2/2] imx: tt01: add MMC support   Helmut Raiger
    • [U-Boot] [PATCH 2/2] tt01: add MMC support   Stefano Babic
    • [U-Boot] [PATCH V2] tt01: add MMC support   Helmut Raiger
    • [U-Boot] [PATCH 1/2] fsl_pmic.h: add regulator mode 0 and 1 bits   Helmut Raiger
    • [U-Boot] [PATCH 1/2] fsl_pmic.h: add regulator mode 0 and 1 bits   Stefano Babic
    • [U-Boot] [PATCH V3 1/2] mc13783.h: create and add regulator mode 0 and 1   Helmut Raiger
    • [U-Boot] [PATCH V3 2/2] tt01: add MMC support   Helmut Raiger
    • [U-Boot] [PATCH V3 2/2] tt01: add MMC support   Stefano Babic
    • [U-Boot] [PATCH V3 2/2] tt01: add MMC support   Helmut Raiger
    • [U-Boot] [PATCH V4] tt01: add MMC support   Helmut Raiger
    • [U-Boot] [PATCH V4] tt01: add MMC support   Stefano Babic
    • [U-Boot] [PATCH V3 1/2] mc13783.h: create and add regulator mode 0 and 1   Stefano Babic
    • [U-Boot] [PATCH 2/2] tt01: add MMC support   Helmut Raiger
• [U-Boot] u-boot-imx on Freescale MX28EVK   Matthias Fuchs
  • [U-Boot] u-boot-imx on Freescale MX28EVK   Fabio Estevam
    • [U-Boot] u-boot-imx on Freescale MX28EVK   Wolfgang Denk
    • [U-Boot] u-boot-imx on Freescale MX28EVK   Fabio Estevam
    • [U-Boot] u-boot-imx on Freescale MX28EVK   Matthias Fuchs
    • [U-Boot] u-boot-imx on Freescale MX28EVK   Fabio Estevam
    • [U-Boot] u-boot-imx on Freescale MX28EVK   Matthias Fuchs
    • [U-Boot] u-boot-imx on Freescale MX28EVK   Robert Deliën
    • [U-Boot] u-boot-imx on Freescale MX28EVK   Matthias Fuchs
    • [U-Boot] u-boot-imx on Freescale MX28EVK   Robert Deliën
    • [U-Boot] u-boot-imx on Freescale MX28EVK   Matthias Fuchs
• [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Andreas Müller
  • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Tom Rini
    • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Peter Bigot
    • [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Doug Anderson
    • [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Mike Frysinger
    • [U-Boot] [PATCH v3] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Doug Anderson
    • [U-Boot] [PATCH v3] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Mike Frysinger
    • [U-Boot] [PATCH v3] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Doug Anderson
    • [U-Boot] [PATCH v4] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Doug Anderson
    • [U-Boot] [PATCH v4] bootm: Avoid 256-byte overflow in fixup_silent_linux()   Mike Frysinger
    • [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Kumar Gala
    • [U-Boot] [PATCH v2] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Fabio Estevam
    • [U-Boot] [PATCH v2] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Kumar Gala
    • [U-Boot] [PATCH v2] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Stefano Babic
    • [U-Boot] [PATCH v2] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Stefano Babic
    • [U-Boot] [PATCH 0/3] devkit3250: add Timll DevKit3250 board initial support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 1/3 v6] arm926ejs: add NXP LPC32x0 cpu series support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 1/3 v6] arm926ejs: add NXP LPC32x0 cpu series support   Marek Vasut
    • [U-Boot] [PATCH 2/3] serial: add LPC32X0 high-speed UART devices support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 2/3] serial: add LPC32X0 high-speed UART devices support   Marek Vasut
    • [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support   Marek Vasut
    • [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support   Marek Vasut
    • [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support   Vladimir Zapolskiy
    • [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board   Vladimir Zapolskiy
    • [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board   Marek Vasut
    • [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board   Vladimir Zapolskiy
    • [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board   Marek Vasut
    • [U-Boot] bootm not taking dtb   JR Rivers
    • [U-Boot] bootm not taking dtb   JR Rivers
    • [U-Boot] bootm not taking dtb   Aggrwal Poonam-B10812
    • [U-Boot] bootm not taking dtb   JR Rivers
    • [U-Boot] bootm not taking dtb   Wolfgang Denk
    • [U-Boot] bootm not taking dtb   Wolfgang Denk
    • [U-Boot] bootm not taking dtb   JR Rivers
    • [U-Boot] [PATCH v2 1/4] PXA: PXA27x Matrix keypad driver   Vasily Khoruzhick
    • [U-Boot] [PATCH v2 2/4] zipitz2: enable pxa27x_mkp driver   Vasily Khoruzhick
    • [U-Boot] [PATCH v2 2/4] zipitz2: enable pxa27x_mkp driver   Marek Vasut
    • [U-Boot] [PATCH v2 3/4] zipitz2: use pxa_mmc_gen as MMC driver   Vasily Khoruzhick
    • [U-Boot] [PATCH v2 3/4] zipitz2: use pxa_mmc_gen as MMC driver   Marek Vasut
    • [U-Boot] [PATCH v2 4/4] zipitz2: fix boot issue introduced by PXA low level init rework   Vasily Khoruzhick
    • [U-Boot] [PATCH v2 1/4] PXA: PXA27x Matrix keypad driver   Marek Vasut
• [U-Boot] [PATCH v2 4/4] zipitz2: fix boot issue introduced by PXA low level init rework   Marek Vasut
• [U-Boot] [PATCH] nand_spl: store ecc data on the stack   Scott Wood
  • [U-Boot] [PATCH] nand_spl: store ecc data on the stack   Stefan Roese
    • [U-Boot] [PATCH v2 0/7] tegra: Enhance funcmux to support I2C and MMC   Simon Glass
    • [U-Boot] [PATCH v2 1/7] tegra: Adjust funcmux config test to permit expansion   Simon Glass
    • [U-Boot] [PATCH v2 2/7] tegra: Add enum to select from available funcmux configs   Simon Glass
    • [U-Boot] [PATCH v2 3/7] tegra: Add I2C support to funcmux   Simon Glass
    • [U-Boot] [PATCH v2 4/7] tegra: Add SDMMC support to funcmux   Simon Glass
    • [U-Boot] [PATCH v2 5/7] tegra: Use funcmux for MMC on tamonten   Simon Glass
    • [U-Boot] [PATCH v2 6/7] tegra: Use funcmux for MMC on harmony   Simon Glass
    • [U-Boot] [PATCH v2 7/7] tegra: Use funcmux for MMC on seaboard   Simon Glass
    • [U-Boot] [PATCH v2 0/7] tegra: Enhance funcmux to support I2C and MMC   Stephen Warren
    • [U-Boot] [PATCH v2 0/2] fdt: Deal correctly with alias nodes   Simon Glass
    • [U-Boot] [PATCH v2 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Simon Glass
    • [U-Boot] [PATCH v2 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Stephen Warren
    • [U-Boot] [PATCH v2 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Simon Glass
    • [U-Boot] [PATCH v2 2/2] fdt: Add tests for fdtdec   Simon Glass
    • [U-Boot] [PATCH v2 2/2] fdt: Add tests for fdtdec   Stephen Warren
    • [U-Boot] [PATCH v2 2/2] fdt: Add tests for fdtdec   Simon Glass
    • [U-Boot] [PATCH v2] skat91: add support for SK-AT91SAM9/SIM508 board   Vladimir Zapolskiy
    • [U-Boot] [PATCH 0/3 v2] devkit3250: add Timll DevKit3250 board initial support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 1/3 v7] arm926ejs: add NXP LPC32x0 cpu series support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 1/3 v7] arm926ejs: add NXP LPC32x0 cpu series support   Marek Vasut
    • [U-Boot] [PATCH 1/3 v7] arm926ejs: add NXP LPC32x0 cpu series support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 1/3 v7] arm926ejs: add NXP LPC32x0 cpu series support   Marek Vasut
    • [U-Boot] [PATCH 2/3 v2] serial: add LPC32X0 high-speed UART devices support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 2/3 v2] serial: add LPC32X0 high-speed UART devices support   Marek Vasut
    • [U-Boot] [PATCH 2/3 v2] serial: add LPC32X0 high-speed UART devices support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 3/3 v4] devkit3250: add Timll DevKit3250 board initial support   Vladimir Zapolskiy
    • [U-Boot] [PATCH 3/3 v4] devkit3250: add Timll DevKit3250 board initial support   Marek Vasut
    • [U-Boot] [PATCH 3/3 v4] devkit3250: add Timll DevKit3250 board initial support   Vladimir Zapolskiy
    • [U-Boot] [PATCH v4 0/20] tegra: Add fdt definitions and USB driver   Simon Glass
    • [U-Boot] [PATCH v4 01/20] fdt: Tidy up a few fdtdec problems   Simon Glass
    • [U-Boot] [PATCH v4 01/20] fdt: Tidy up a few fdtdec problems   Stephen Warren
    • [U-Boot] [PATCH v4 01/20] fdt: Tidy up a few fdtdec problems   Jerry Van Baren
    • [U-Boot] [PATCH v4 02/20] fdt: Add functions to access phandles, arrays and bools   Simon Glass
    • [U-Boot] [PATCH v4 02/20] fdt: Add functions to access phandles, arrays and bools   Stephen Warren
    • [U-Boot] [PATCH v4 02/20] fdt: Add functions to access phandles, arrays and bools   Jerry Van Baren
    • [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions   Simon Glass
    • [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions   Stephen Warren
    • [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions   Simon Glass
    • [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions   Stephen Warren
    • [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions   Simon Glass
    • [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions   Stephen Warren
    • [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions   Simon Glass
    • [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned   Simon Glass
    • [U-Boot] [PATCH v4 05/20] arm: fdt: Add skeleton device tree file from kernel   Simon Glass
    • [U-Boot] [PATCH v4 06/20] tegra: fdt: Add Tegra2x device tree file from kernel   Simon Glass
    • [U-Boot] [PATCH v4 06/20] tegra: fdt: Add Tegra2x device tree file from kernel   Stephen Warren
    • [U-Boot] [PATCH v4 06/20] tegra: fdt: Add Tegra2x device tree file from kernel   Simon Glass
    • [U-Boot] [PATCH v4 06/20] tegra: fdt: Add Tegra2x device tree file from kernel   Stephen Warren
    • [U-Boot] [PATCH v4 07/20] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel   Simon Glass
    • [U-Boot] [PATCH v4 07/20] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel   Stephen Warren
    • [U-Boot] [PATCH v4 07/20] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel   Simon Glass
    • [U-Boot] [PATCH v4 08/20] fdt: Add staging area for device tree binding documentation   Simon Glass
    • [U-Boot] [PATCH v4 08/20] fdt: Add staging area for device tree binding documentation   Stephen Warren
    • [U-Boot] [PATCH v4 08/20] fdt: Add staging area for device tree binding documentation   Simon Glass
    • [U-Boot] [PATCH v4 09/20] fdt: Add tegra-usb bindings file from linux   Simon Glass
    • [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding   Simon Glass
    • [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding   Stephen Warren
    • [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding   Olof Johansson
    • [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding   Simon Glass
    • [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding   Olof Johansson
    • [U-Boot] [PATCH v4 11/20] tegra: fdt: Add clock bindings   Simon Glass
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Stephen Warren
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Olof Johansson
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Stephen Warren
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Olof Johansson
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Mitch Bradley
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Stephen Warren
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Mitch Bradley
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Grant Likely
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Simon Glass
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Stephen Warren
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Peter De Schrijver
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Stephen Warren
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Colin Cross
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Stephen Warren
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Colin Cross
    • [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding   Peter De Schrijver
    • [U-Boot] [PATCH v4 12/20] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
    • [U-Boot] [PATCH v4 12/20] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
    • [U-Boot] [PATCH v4 12/20] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
    • [U-Boot] [PATCH v4 13/20] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Simon Glass
    • [U-Boot] [PATCH v4 14/20] usb: Add support for txfifo threshold   Simon Glass
    • [U-Boot] [PATCH v4 14/20] usb: Add support for txfifo threshold   Remy Bohmer
    • [U-Boot] [PATCH v4 15/20] fdt: Add function to return peripheral/clock ID   Simon Glass
    • [U-Boot] [PATCH v4 16/20] tegra: usb: Add support for Tegra USB peripheral   Simon Glass
    • [U-Boot] [PATCH v4 16/20] tegra: usb: Add support for Tegra USB peripheral   Remy Bohmer
    • [U-Boot] [PATCH v4 16/20] tegra: usb: Add support for Tegra USB peripheral   Stephen Warren
    • [U-Boot] [PATCH v4 16/20] tegra: usb: Add support for Tegra USB peripheral   Simon Glass
    • [U-Boot] [PATCH v4 17/20] tegra: usb: Add USB support to nvidia boards   Simon Glass
    • [U-Boot] [PATCH v4 17/20] tegra: usb: Add USB support to nvidia boards   Stephen Warren
    • [U-Boot] [PATCH v4 17/20] tegra: usb: Add USB support to nvidia boards   Simon Glass
    • [U-Boot] [PATCH v4 18/20] tegra: usb: Add common USB defines for tegra2 boards   Simon Glass
    • [U-Boot] [PATCH v4 19/20] tegra: usb: Enable USB on Seaboard   Simon Glass
    • [U-Boot] [PATCH v4 20/20] tegra: fdt: Enable FDT support for Seaboard   Simon Glass
    • [U-Boot] [PATCH v4 0/20] tegra: Add fdt definitions and USB driver   Simon Glass
    • [U-Boot] [PATCH v2 0/9] Unified command execution in one place   Simon Glass
      • [U-Boot] [PATCH v2 0/9] Unified command execution in one place   Stefan Roese
• [U-Boot] [PATCH v2 0/9] Unified command execution in one place   Stefan Roese
  • [U-Boot] [PATCH v2 0/9] Unified command execution in one place   Simon Glass
• [U-Boot] Please pull u-boot-staging/sr at denx.de   Stefan Roese
• [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Stefan Roese
• [U-Boot] Please pull u-boot-staging/sr at denx.de - UPDATE   Stefan Roese
  • [U-Boot] Please pull u-boot-staging/sr at denx.de - UPDATE   Wolfgang Denk
    • [U-Boot] [PATCH v2] arm, davinci: Add support for the Calimain board from OMICRON electronics   Christian Riesch
    • [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation   Dirk Behme
    • [U-Boot] [PATCH 2/3] imximage: Add support for i.MX6   Dirk Behme
    • [U-Boot] [PATCH 2/3] imximage: Add support for i.MX6   Jason Hui
    • [U-Boot] [PATCH 2/3] imximage: Add support for i.MX6   Stefano Babic
    • [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation   Jason Hui
    • [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation   Dirk Behme
    • [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation   Stefano Babic
    • [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation   Stefano Babic
    • [U-Boot] [PATCH 3/3] imximage: Sort bootops alphabetically   Dirk Behme
    • [U-Boot] [PATCH 3/3] imximage: Sort bootops alphabetically   Jason Hui
    • [U-Boot] [PATCH 3/3] imximage: Sort bootops alphabetically   Stefano Babic
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Dirk Behme
    • [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support   Dirk Behme
    • [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support   Fabio Estevam
    • [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support   Marek Vasut
    • [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support   Fabio Estevam
    • [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support   Dirk Behme
    • [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support   Mike Frysinger
    • [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support   Mike Frysinger
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Marek Vasut
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Dirk Behme
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Marek Vasut
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Fabio Estevam
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Stefano Babic
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Dirk Behme
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Eric Nelson
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Stefano Babic
    • [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver   Mike Frysinger
    • [U-Boot] [PATCH v2 0/7] tegra: Add I2C driver and associated parts   Simon Glass
    • [U-Boot] [PATCH v2 1/7] tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE   Simon Glass
    • [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes   Simon Glass
    • [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes   Stephen Warren
    • [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes   Simon Glass
    • [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes   Stephen Warren
    • [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes   Simon Glass
    • [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot   Simon Glass
    • [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot   Heiko Schocher
    • [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot   Simon Glass
    • [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot   Stephen Warren
    • [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot   Simon Glass
    • [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot   Stephen Warren
    • [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver   Simon Glass
    • [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver   Heiko Schocher
    • [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver   Simon Glass
    • [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver   Heiko Schocher
    • [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver   Stephen Warren
    • [U-Boot] [PATCH v2 5/7] tegra: Initialise I2C on Nvidia boards   Simon Glass
    • [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard   Simon Glass
    • [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard   Stephen Warren
    • [U-Boot] [PATCH v2 7/7] tegra: Enable I2C on Seaboard   Simon Glass
    • [U-Boot] [PATCH v2 0/7] tegra: Add I2C driver and associated parts   Heiko Schocher
    • [U-Boot] [PATCH v2 0/7] tegra: Add I2C driver and associated parts   Simon Glass
  • [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard   Simon Glass
    • [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard   Stephen Warren
      • [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard   Simon Glass
    • [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard   Heiko Schocher
      • [U-Boot] [PATCH] post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU   Kumar Gala
      • [U-Boot] [PATCH] post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU   Wolfgang Denk
      • [U-Boot] [PATCH] post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU   Wolfgang Denk
• [U-Boot] [GIT PULL] please pull u-boot-mpc85xx   Kumar Gala
  • [U-Boot] [GIT PULL] please pull u-boot-mpc85xx   Paul Gortmaker
    • [U-Boot] [GIT PULL] please pull u-boot-mpc85xx   Kumar Gala
  • [U-Boot] [GIT PULL] please pull u-boot-mpc85xx   Wolfgang Denk
• [U-Boot] compile the u-boot   Jilin Zhou
  • [U-Boot] compile the u-boot   Albert ARIBAUD
    • [U-Boot] compile the u-boot   Jilin Zhou
      • [U-Boot] compile the u-boot   Wolfgang Denk
      • [U-Boot] mx28evk_config integration   Robert Deliën
      • [U-Boot] mx28evk_config integration   Fabio Estevam
      • [U-Boot] mx28evk_config integration   Stefano Babic
      • [U-Boot] mx28evk_config integration   Robert Deliën
      • [U-Boot] mx28evk_config integration   Marek Vasut
      • [U-Boot] mx28evk_config integration   Robert Deliën
      • [U-Boot] mx28evk_config integration   Stefano Babic
      • [U-Boot] mx28evk_config integration   Marek Vasut
      • [U-Boot] mx28evk_config integration   Fabio Estevam
      • [U-Boot] mx28evk_config integration   Robert Deliën
      • [U-Boot] mx28evk_config integration   Robert Deliën
      • [U-Boot] [PATCH 0/3 v3] devkit3250: add Timll DevKit3250 board initial support   Vladimir Zapolskiy
      • [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support   Vladimir Zapolskiy
      • [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support   Marek Vasut
      • [U-Boot] [PATCH 3/3 v5] devkit3250: add Timll DevKit3250 board initial support   Vladimir Zapolskiy
      • [U-Boot] [PATCH 3/3 v5] devkit3250: add Timll DevKit3250 board initial support   Marek Vasut
      • [U-Boot] [PATCH 2/3 v3] serial: add LPC32X0 high-speed UART devices support   Vladimir Zapolskiy
      • [U-Boot] [PATCH 2/3 v3] serial: add LPC32X0 high-speed UART devices support   Marek Vasut
• [U-Boot] [PATCH 1/2] nand: Introduce CONFIG_SYS_NAND_SELF_INIT   Scott Wood
  • [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init   Scott Wood
    • [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init   Mike Frysinger
      • [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init   Scott Wood
      • [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init   Scott Wood
      • [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init   Mike Frysinger
      • [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init   Scott Wood
      • [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init   Mike Frysinger
      • [U-Boot] [PATCH v3 1/4] PXA: PXA27x Matrix keypad driver   Vasily Khoruzhick
      • [U-Boot] [PATCH v3 2/4] zipitz2: enable pxa27x_mkp driver   Vasily Khoruzhick
      • [U-Boot] [PATCH v3 3/4] zipitz2: use pxa_mmc_gen as MMC driver   Vasily Khoruzhick
      • [U-Boot] [PATCH v3 3/4] zipitz2: use pxa_mmc_gen as MMC driver   Marek Vasut
      • [U-Boot] [PATCH v3 3/4] zipitz2: use pxa_mmc_gen as MMC driver   Vasily Khoruzhick
      • [U-Boot] [PATCH v3 3/4] zipitz2: use pxa_mmc_gen as MMC driver   Marek Vasut
      • [U-Boot] [PATCH v3 4/4] zipitz2: fix boot issue introduced by PXA low level init rework   Vasily Khoruzhick
      • [U-Boot] [PATCH v3 4/4] zipitz2: fix boot issue introduced by PXA low level init rework   Marek Vasut
      • [U-Boot] [PATCH v3 1/4] PXA: PXA27x Matrix keypad driver   Marek Vasut
      • [U-Boot] [PATCH v3 1/4] PXA: PXA27x Matrix keypad driver   Vasily Khoruzhick
      • [U-Boot] [PATCH v3 1/4] PXA: PXA27x Matrix keypad driver   Marek Vasut
      • [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Add the ethernet function support   Dirk Behme
      • [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Add the ethernet function support   Stefano Babic
      • [U-Boot] [PATCH] i.mx6: mx6x_pins: Fix uart txd definitions   Dirk Behme
      • [U-Boot] [PATCH] i.mx6q: configs: Add fdt_high and initrd_high variables   Dirk Behme
      • [U-Boot] [PATCH] i.mx6q: configs: Add fdt_high and initrd_high variables   Jason Hui
      • [U-Boot] [PATCH] i.mx6q: configs: Add fdt_high and initrd_high variables   Stefano Babic
      • [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Setup uart1 pinmux   Dirk Behme
      • [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Setup uart1 pinmux   Jason Hui
      • [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Setup uart1 pinmux   Stefano Babic
      • [U-Boot] [PATCH] i.mx6: mx6x_pins: Fix uart txd definitions   Jason Hui
      • [U-Boot] [PATCH 1/3] ARM: I2C: I2C Multi byte address support   Patil, Rachna
      • [U-Boot] [PATCH 1/3] ARM: I2C: I2C Multi byte address support   Heiko Schocher
      • [U-Boot] [PATCH 1/3] ARM: I2C: I2C Multi byte address support   Patil, Rachna
      • [U-Boot] [PATCH 2/3] ARM: AM33XX: Add AM33XX I2C driver support   Patil, Rachna
      • [U-Boot] [PATCH 3/3] ARM: AM33XX: Add i2c support   Patil, Rachna
      • [U-Boot] [PATCH 3/3] ARM: AM33XX: Add i2c support   Kumar Nath, Chandan
      • [U-Boot] [PATCH 3/3] ARM: AM33XX: Add i2c support   Patil, Rachna
      • [U-Boot] [PATCH 1/5] net: fec_mxc: Add 1000 Mbps selection   Dirk Behme
      • [U-Boot] [PATCH 2/5] net: fec_mxc: Increase autonegotiation timeout   Dirk Behme
      • [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Dirk Behme
      • [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Marek Vasut
      • [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Mike Frysinger
      • [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Dirk Behme
      • [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Dirk Behme
      • [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Mike Frysinger
      • [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Mike Frysinger
      • [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed   Dirk Behme
      • [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall   Dirk Behme
      • [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall   Marek Vasut
      • [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall   Troy Kisky
      • [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall   Stefano Babic
      • [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall   Troy Kisky
      • [U-Boot] [PATCH 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Dirk Behme
      • [U-Boot] [PATCH 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Jason Hui
      • [U-Boot] [PATCH 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Troy Kisky
      • [U-Boot] [PATCH 1/5] net: fec_mxc: Add 1000 Mbps selection   Marek Vasut
• [U-Boot] Bug of NOR Flash CFI Driver   Robert Ding
  • [U-Boot] Bug of NOR Flash CFI Driver   Wolfgang Denk
    • [U-Boot] [PATCH] [v2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000   Timur Tabi
    • [U-Boot] [PATCH] [v2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000   Wolfgang Denk
    • [U-Boot] [PATCH] [v2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000   Timur Tabi
    • [U-Boot] [PATCH] [v2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000   Timur Tabi
    • [U-Boot] [PATCH V3 4/4] ARM: omap3: Added Teejet mt_ventoux   Stefano Babic
    • [U-Boot] [PATCH 2/2] eXMeritus HWW-1U-1A: Minor environment variable tweaks   Kumar Gala
    • [U-Boot] [PATCH 1/2] eXMeritus HWW-1U-1A: Add support for the AT24C128N I2C EEPROM   Kumar Gala
    • [U-Boot] [PATCH] MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC   Kumar Gala
    • [U-Boot] [PATCH 85xx-next 0/8] Updates for Wind River sbc8548 board   Kumar Gala
    • [U-Boot] [PATCH] fsl_lbc: add printout of LCRR and LBCR to local bus regs   Kumar Gala
• [U-Boot] mx28: bug in mxs_spi driver   Matthias Fuchs
• [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Wolfgang Denk
  • [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Eric Miao
    • [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Eric Miao
  • [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Philip Balister
    • [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Wolfgang Denk
• [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()   Wolfgang Denk
  • [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()   Simon Glass
    • [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()   Wolfgang Denk
      • [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()   Simon Glass
      • [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()   Simon Glass
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
  • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH 1/9] Strip mkenvimage   Wolfgang Denk
• [U-Boot] [PATCH 0/9] mkenvimage: v10/v11 diff split into several patches   Wolfgang Denk
  • [U-Boot] [PATCH 0/9] mkenvimage: v10/v11 diff split into several patches   David Wagner
• [U-Boot] [PATCH v2 1/9] openrisc: Add architecture header files   Wolfgang Denk
• [U-Boot] [PATCH v2 2/9] openrisc: Add architecture image support   Wolfgang Denk
• [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files   Wolfgang Denk
• [U-Boot] [PATCH v2 4/9] openrisc: Add library functions   Wolfgang Denk
• [U-Boot] [PATCH v2 5/9] openrisc: Add board info printout to cmd_bdinfo   Wolfgang Denk
• [U-Boot] [PATCH v2 6/9] openrisc: Add support for standalone programs   Wolfgang Denk
• [U-Boot] [PATCH v2 7/9] openrisc: Add openrisc-generic example board   Wolfgang Denk
• [U-Boot] [PATCH v2 8/9] openrisc: Add architecture to MAKEALL   Wolfgang Denk
• [U-Boot] [PATCH v2 9/9] openrisc: Add MAINTAINERS entry   Wolfgang Denk
• [U-Boot] [PATCH v2] net: allow setting env enetaddr from net device setting   Wolfgang Denk
• [U-Boot] Fwd: [PATCH v6 1/2] Introduce generic TPM support in u-boot   Wolfgang Denk
  • [U-Boot] [PATCH v2 0/20] tegra: warmboot (suspend / resume) support   Simon Glass
  • [U-Boot] [PATCH v2 01/20] fdt: Add function to locate an array in the device tree   Simon Glass
  • [U-Boot] [PATCH v2 02/20] i2c: Add TPS6586X driver   Simon Glass
  • [U-Boot] [PATCH v2 02/20] i2c: Add TPS6586X driver   Heiko Schocher
  • [U-Boot] [PATCH v2 03/20] Add AES crypto library   Simon Glass
  • [U-Boot] [PATCH v2 04/20] tegra: Move ap20.h header into arch location   Simon Glass
  • [U-Boot] [PATCH v2 05/20] tegra: Add functions to access low-level Osc/PLL details   Simon Glass
  • [U-Boot] [PATCH v2 06/20] tegra: Add crypto library for warmboot code   Simon Glass
  • [U-Boot] [PATCH v2 07/20] tegra: Add flow, gp_padctl, fuse, sdram headers   Simon Glass
  • [U-Boot] [PATCH v2 08/20] tegra: Add tegra_get_chip_type() to detect SKU   Simon Glass
  • [U-Boot] [PATCH v2 08/20] tegra: Add tegra_get_chip_type() to detect SKU   Stephen Warren
  • [U-Boot] [PATCH v2 09/20] tegra: Add EMC support for optimal memory timings   Simon Glass
  • [U-Boot] [PATCH v2 09/20] tegra: Add EMC support for optimal memory timings   Stephen Warren
  • [U-Boot] [PATCH v2 09/20] tegra: Add EMC support for optimal memory timings   Simon Glass
  • [U-Boot] [PATCH v2 09/20] tegra: Add EMC support for optimal memory timings   Stephen Warren
  • [U-Boot] [PATCH v2 10/20] tegra: Add PMU to manage power supplies   Simon Glass
  • [U-Boot] [PATCH v2 11/20] tegra: Set up PMU for Nvidia boards   Simon Glass
  • [U-Boot] [PATCH v2 12/20] tegra: Add warmboot implementation   Simon Glass
  • [U-Boot] [PATCH v2 12/20] tegra: Add warmboot implementation   Stephen Warren
  • [U-Boot] [PATCH v2 13/20] tegra: Setup PMC scratch info from ap20 setup   Simon Glass
  • [U-Boot] [PATCH v2 14/20] tegra: Set up warmboot code on Nvidia boards   Simon Glass
  • [U-Boot] [PATCH v2 15/20] Tegra2: Turn off power detect in board init   Simon Glass
  • [U-Boot] [PATCH v2 16/20] tegra: Add EMC settings for Seaboard   Simon Glass
  • [U-Boot] [PATCH v2 17/20] fdt: tegra: Add EMC node to device tree   Simon Glass
  • [U-Boot] [PATCH v2 18/20] tegra: i2c: Add function to find DVC bus   Simon Glass
  • [U-Boot] [PATCH v2 18/20] tegra: i2c: Add function to find DVC bus   Heiko Schocher
  • [U-Boot] [PATCH v2 19/20] tegra: fdt: Add EMC data for Tegra2 Seaboard   Simon Glass
  • [U-Boot] [PATCH v2 19/20] tegra: fdt: Add EMC data for Tegra2 Seaboard   Simon Glass
  • [U-Boot] [PATCH v2 20/20] tegra: Enable LP0 on Seaboard   Simon Glass
  • [U-Boot] [PATCH v2 20/20] tegra: Enable LP0 on Seaboard   Mike Frysinger
  • [U-Boot] [PATCH v2 20/20] tegra: Enable LP0 on Seaboard   Stephen Warren
  • [U-Boot] [PATCH v2 0/20] tegra: warmboot (suspend / resume) support   Mike Frysinger
  • [U-Boot] [PATCH v2] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
  • [U-Boot] [PATCH v2] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
  • [U-Boot] [PATCH v2] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
  • [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation   Simon Glass
    • [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation   Stephen Warren
      • [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation   Yen Lin
      • [U-Boot] [PATCH 0/6] tegra: Add NAND flash support   Simon Glass
      • [U-Boot] [PATCH 1/6] fdt: Add debugging to fdtdec_get_int/addr()   Simon Glass
      • [U-Boot] [PATCH 2/6] tegra: Add NAND support to funcmux   Simon Glass
      • [U-Boot] [PATCH 2/6] tegra: Add NAND support to funcmux   Stephen Warren
      • [U-Boot] [PATCH 3/6] tegra: fdt: Add NAND controller binding and definitions   Simon Glass
      • [U-Boot] [PATCH 3/6] tegra: fdt: Add NAND controller binding and definitions   Stephen Warren
      • [U-Boot] [PATCH 4/6] tegra: fdt: Add NAND definitions to fdt   Simon Glass
      • [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver   Simon Glass
      • [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver   Mike Frysinger
      • [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver   Simon Glass
      • [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver   Mike Frysinger
      • [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver   Jim Lin
      • [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver   Stephen Warren
      • [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver   Scott Wood
      • [U-Boot] [PATCH 6/6] tegra: Enable NAND on Seaboard   Simon Glass
      • [U-Boot] [PATCHv5 1/7] mkenvimage: correct and clarify comments and error messages   David Wagner
      • [U-Boot] [PATCHv5 2/7] mkenvimage: Correct an include and add a missing one   David Wagner
      • [U-Boot] [PATCHv5 2/7] mkenvimage: Correct an include and add a missing one   Mike Frysinger
      • [U-Boot] [PATCHv5 3/7] mkenvimage: More error handling   David Wagner
      • [U-Boot] [PATCHv5 3/7] mkenvimage: More error handling   Mike Frysinger
      • [U-Boot] [PATCHv5 4/7] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"   David Wagner
      • [U-Boot] [PATCHv5 4/7] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"   Mike Frysinger
      • [U-Boot] [PATCHv5 5/7] mkenvimage: Use mmap() when reading from a regular file   David Wagner
      • [U-Boot] [PATCHv5 5/7] mkenvimage: Use mmap() when reading from a regular file   Mike Frysinger
      • [U-Boot] [PATCHv5 6/7] mkenvimage: Don't try to detect comments in the input file   David Wagner
      • [U-Boot] [PATCHv5 6/7] mkenvimage: Don't try to detect comments in the input file   Mike Frysinger
      • [U-Boot] [PATCHv5 7/7] mkenvimage: Really set the redundant byte when applicable   David Wagner
      • [U-Boot] [PATCHv5 7/7] mkenvimage: Really set the redundant byte when applicable   Mike Frysinger
      • [U-Boot] [PATCHv5 1/7] mkenvimage: correct and clarify comments and error messages   Mike Frysinger
      • [U-Boot] [PATCH v2] main: unify command parsing functions   Michael Walle
  • [U-Boot] Bug in cfb_console driver   Pali Rohár
    • [U-Boot] [PATCH v4 0/9] Unified command execution in one place   Simon Glass
    • [U-Boot] [PATCH v4 1/9] Remove CMD_PXE's static on run_command()   Simon Glass
    • [U-Boot] [PATCH v4 2/9] Rename run_command() to builtin_run_command()   Simon Glass
    • [U-Boot] [PATCH v4 3/9] Rename run_command2() to run_command()   Simon Glass
    • [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()   Simon Glass
    • [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()   Michael Walle
    • [U-Boot] [PATCH v4 5/9] Don't include standard parser if hush is used   Simon Glass
    • [U-Boot] [PATCH v4 6/9] Create a single cmd_call() function to handle command execution   Simon Glass
    • [U-Boot] [PATCH v4 7/9] Remove interleave of non-U-Boot code in hush   Simon Glass
    • [U-Boot] [PATCH v4 8/9] Add cmd_process() to process commands in one place   Simon Glass
    • [U-Boot] [PATCH v4 9/9] Convert cmd_usage() calls in common to use a return value   Simon Glass
• [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board   Albert ARIBAUD
  • [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board   Stefano Babic
    • [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board   Albert ARIBAUD
      • [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board   Stefano Babic
      • [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board   Albert ARIBAUD
    • [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board   Tom Rini
      • [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board   Stefano Babic
• [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Matthias Fuchs
  • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Marek Vasut
    • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Matthias Fuchs
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Alexander Keller
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Fabio Estevam
    • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Fabio Estevam
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Fabio Estevam
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Fabio Estevam
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Matthias Fuchs
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Fabio Estevam
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Matthias Fuchs
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Fabio Estevam
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Matthias Fuchs
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Fabio Estevam
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Marek Vasut
  • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Stefano Babic
    • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Fabio Estevam
      • [U-Boot] [PATCH] mx28: fix i.MX28 spi driver   Stefano Babic
      • [U-Boot] [PATCH] omap3: board.c - Fix compile warnings   Pali Rohár
      • [U-Boot] [PATCH] omap3: board.c - Fix compile warnings   Marek Vasut
      • [U-Boot] [PATCH] omap3: board.c - Fix compile warnings   Marek Vasut
      • [U-Boot] [PATCH] omap3: board.c - Fix compile warnings   Pali Rohár
      • [U-Boot] [PATCH] omap3: board.c - Fix compile warnings   Marek Vasut
      • [U-Boot] [PATCH] omap3: board.c - Fix compile warnings   Tom Rini
      • [U-Boot] [PATCH] omap3: board.c - Fix compile warnings   Marek Vasut
      • [U-Boot] [PATCH v4 1/3] PXA: PXA27x Matrix keypad driver   Vasily Khoruzhick
      • [U-Boot] [PATCH v4 3/3] zipitz2: use pxa_mmc_gen as MMC driver   Vasily Khoruzhick
      • [U-Boot] [PATCH v4 3/3] zipitz2: use pxa_mmc_gen as MMC driver   Marek Vasut
      • [U-Boot] [PATCH v4 1/3] PXA: PXA27x Matrix keypad driver   Marek Vasut
      • [U-Boot] [PATCH v4 2/3] zipitz2: enable pxa27x_mkp driver   Vasily Khoruzhick
      • [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard   Simon Glass
      • [U-Boot] [PATCH 01/17] fdt: Add function to look up a phandle's register address   Simon Glass
      • [U-Boot] [PATCH 02/17] fdt: Add header guard to fdtdec.h   Simon Glass
      • [U-Boot] [PATCH 03/17] fdt: Correct GPIO name access in fdtdec   Simon Glass
      • [U-Boot] [PATCH 04/17] tegra: Add display support to funcmux   Simon Glass
      • [U-Boot] [PATCH 04/17] tegra: Add display support to funcmux   Mike Frysinger
      • [U-Boot] [PATCH 05/17] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
      • [U-Boot] [PATCH 06/17] tegra: Add support for PWFM   Simon Glass
      • [U-Boot] [PATCH 07/17] tegra: Add SOC support for display/lcd   Simon Glass
      • [U-Boot] [PATCH 08/17] tegra: Add LCD driver   Simon Glass
      • [U-Boot] [PATCH 09/17] tegra: Add LCD support to Nvidia boards   Simon Glass
      • [U-Boot] [PATCH 10/17] arm: Add control over cachability of memory regions   Simon Glass
      • [U-Boot] [PATCH 11/17] lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU   Simon Glass
      • [U-Boot] [PATCH 11/17] lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU   Mike Frysinger
      • [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
      • [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update   Mike Frysinger
      • [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
      • [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update   Mike Frysinger
      • [U-Boot] [PATCH 13/17] tegra: Align LCD frame buffer to section boundary   Simon Glass
      • [U-Boot] [PATCH 14/17] tegra: Support control of cache settings for LCD   Simon Glass
      • [U-Boot] [PATCH 15/17] tegra: fdt: Add LCD definitions for Seaboard   Simon Glass
      • [U-Boot] [PATCH 16/17] lcd: Add CONSOLE_SCROLL_LINES option to speed console   Simon Glass
      • [U-Boot] [PATCH 17/17] tegra: Enable display/lcd support on Seaboard   Simon Glass
      • [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script   Simon Glass
      • [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script   Simon Glass
      • [U-Boot] [PATCH v3 0/15] bootstage: record and publish boot progress timing   Simon Glass
      • [U-Boot] [PATCH v3 01/15] bootstage: Create an initial header for boot progress integers   Simon Glass
      • [U-Boot] [PATCH v3 02/15] bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress()   Simon Glass
      • [U-Boot] [PATCH v3 03/15] bootstage: Use show_boot_error() for -ve progress numbers   Simon Glass
      • [U-Boot] [PATCH v3 04/15] bootstage: Convert progress numbers 1-9 into enums   Simon Glass
      • [U-Boot] [PATCH v3 05/15] bootstage: Convert progress numbers 10-19 to enums   Simon Glass
      • [U-Boot] [PATCH v3 06/15] bootstage: Convert progress numbers 20-41 to enums   Simon Glass
      • [U-Boot] [PATCH v3 07/15] bootstage: Convert IDE progress numbers to enums   Simon Glass
      • [U-Boot] [PATCH v3 08/15] bootstage: Convert NAND progress numbers to enums   Simon Glass
      • [U-Boot] [PATCH v3 09/15] bootstage: Convert net progress numbers to enums   Simon Glass
      • [U-Boot] [PATCH v3 10/15] bootstage: Convert FIT progress numbers to enums   Simon Glass
      • [U-Boot] [PATCH v3 11/15] timer: add microsecond boot func   Simon Glass
      • [U-Boot] [PATCH v3 12/15] bootstage: Replace show_boot_progress/error() with bootstage_...()   Simon Glass
      • [U-Boot] [PATCH v3 13/15] bootstage: Implement core microsecond boot time measurement   Simon Glass
      • [U-Boot] [PATCH v3 14/15] bootstage: Plumb in bootstage calls for basic operations   Simon Glass
      • [U-Boot] [PATCH v3 15/15] bootstage: arm: Add bootstage calls in board and bootm   Simon Glass
      • [U-Boot] [PATCH] arm, davinci: add workaround for not resetting DMA bus and VPSS modules   Heiko Schocher
      • [U-Boot] [PATCH] arm, davinci: add timer defines for tcr field   Heiko Schocher
      • [U-Boot] [PATCH] common, image: introduce new uimage types   Heiko Schocher
      • [U-Boot] [PATCH] common, image: introduce new uimage types   Mike Frysinger
      • [U-Boot] [PATCH] common, image: introduce new uimage types   Heiko Schocher
      • [U-Boot] [PATCH] common, image: introduce new uimage types   Wolfgang Denk
      • [U-Boot] [PATCH] common, image: introduce new uimage types   Heiko Schocher
      • [U-Boot] [PATCH 0/3] common, menu: enhancements   Heiko Schocher
      • [U-Boot] [PATCH 1/3] common: add possibility for readline_into_buffer timeout   Heiko Schocher
      • [U-Boot] [PATCH 1/3] common: add possibility for readline_into_buffer timeout   Mike Frysinger
      • [U-Boot] [PATCH 1/3] common: add possibility for readline_into_buffer timeout   Heiko Schocher
      • [U-Boot] [PATCH 1/3 v2] common: add possibility for readline_into_buffer timeout   Heiko Schocher
      • [U-Boot] [PATCH 1/3 v2] common: add possibility for readline_into_buffer timeout   Mike Frysinger
      • [U-Boot] [PATCH 2/3] common, menu: add statusline support   Heiko Schocher
      • [U-Boot] [PATCH 2/3] common, menu: add statusline support   Mike Frysinger
      • [U-Boot] [PATCH 2/3] common, menu: add statusline support   Heiko Schocher
      • [U-Boot] [PATCH 2/3 v2] common, menu: add statusline support   Heiko Schocher
      • [U-Boot] [PATCH 2/3 v2] common, menu: add statusline support   Mike Frysinger
      • [U-Boot] [PATCH 3/3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined   Heiko Schocher
      • [U-Boot] [PATCH 3/3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined   Mike Frysinger
      • [U-Boot] [PATCH 3/3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined   Heiko Schocher
      • [U-Boot] [PATCH 3/3 v2] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined   Heiko Schocher
      • [U-Boot] [PATCH 3/3 v2] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined   Jason Hobbs
      • [U-Boot] [PATCH 3/3 v3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined   Heiko Schocher
      • [U-Boot] [PATCH] arm, davinci: cam_enc_4xx board updates   Heiko Schocher
      • [U-Boot] [PATCH] arm, davinci: cam_enc_4xx board updates   Tom Rini
      • [U-Boot] [PATCH] arm, davinci: cam_enc_4xx board updates   Heiko Schocher
      • [U-Boot] [PATCH v2] arm, davinci: cam_enc_4xx board updates   Heiko Schocher
• [U-Boot] LL TEMAC V8 refactored   Stephan Linz
  • [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
  • [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot   Mike Frysinger
  • [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
  • [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot   Mike Frysinger
  • [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
  • [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot   Wolfgang Denk
  • [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
  • [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot   Wolfgang Denk
  • [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
  • [U-Boot] [PATCH] net: ll_temac: Remove useless memory erasing   Stephan Linz
  • [U-Boot] [PATCH] net: ll_temac: Remove useless memory erasing   Mike Frysinger
  • [U-Boot] [PATCH] net: ll_temac: Remove useless memory erasing   Stephan Linz
  • [U-Boot] [PATCH] net: ll_temac: Remove useless memory erasing   Wolfgang Denk
  • [U-Boot] [PATCH 2/5] microblaze: Enable several ethernet driver compilation   Stephan Linz
  • [U-Boot] [PATCH 3/5] microblaze: Wire up LL_TEMAC driver initialization   Stephan Linz
  • [U-Boot] [PATCH 4/5] microblaze: Enable phylib and mii support   Stephan Linz
  • [U-Boot] [PATCH 5/5] microblaze: Add faked LL_TEMAC driver configuration   Stephan Linz
  • [U-Boot] [PATCH] USB: relax usbcore reset timings   Remy Bohmer
  • [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect   Remy Bohmer
• [U-Boot] [PATCH] USB: move keyboard polling into kbd driver   Remy Bohmer
  • [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Remy Bohmer
    • [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Tom Rini
      • [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Govindraj
      • [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Stefano Babic
      • [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Govindraj
      • [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Stefano Babic
      • [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Tom Rini
      • [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Govindraj
      • [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Stefano Babic
      • [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize   Mike Frysinger
      • [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize   Thomas Chou
      • [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize   Wolfgang Denk
      • [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize   Mike Frysinger
      • [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize   Wolfgang Denk
      • [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize   Mike Frysinger
      • [U-Boot] [PATCH 1/2] net: punt bd->bi_ip_addr   Mike Frysinger
      • [U-Boot] [PATCH] add new board vl_ma2sc   Jens Scharsig
      • [U-Boot] [PATCH] add new board vl_ma2sc   Heiko Schocher
      • [U-Boot] [PATCH] add new board vl_ma2sc   Jens Scharsig
      • [U-Boot] [PATCH] add new board vl_ma2sc   Heiko Schocher
      • [U-Boot] [PATCH] add new board vl_ma2sc   Mike Frysinger
      • [U-Boot] [PATCH V2] add new board vl_ma2sc   Jens Scharsig
      • [U-Boot] [PATCH] edminiv2: add hush parser and long help   Albert ARIBAUD
      • [U-Boot] [PATCH] edminiv2: add hush parser and long help   Prafulla Wadaskar
      • [U-Boot] [PATCH V2] edminiv2: add hush parser, cmdline editing and long help   Albert ARIBAUD
      • [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2   Albert ARIBAUD
      • [U-Boot] [PATCH 1/4] Rename ehci-kirkwood as ehci-marvell   Albert ARIBAUD
      • [U-Boot] [PATCH 2/4] Remove kirkwood-specifics from marvell EHCI driver   Albert ARIBAUD
      • [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2   Prafulla Wadaskar
      • [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2   Albert ARIBAUD
      • [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2   Prafulla Wadaskar
      • [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2   Albert ARIBAUD
      • [U-Boot] [PATCH 3/4] orion5x: add USB host ehci-marvell support   Albert ARIBAUD
      • [U-Boot] [PATCH 4/4] edminiv2: add USB host support   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: Add Prep subcommand support to bootm   Simon Schwarz
      • [U-Boot] [PATCH] arm: Add Prep subcommand support to bootm   Stefano Babic
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] [PATCH V13 04/14] devkit8000/spl: init GPMC for dm9000 in SPL   Stefano Babic
  • [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards   Stefano Babic
  • [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards   Wolfgang Denk
• [U-Boot] OMAP3 performance regression in 2011.12   Joe Woodward
  • [U-Boot] OMAP3 performance regression in 2011.12   Philip Balister
    • [U-Boot] OMAP3 performance regression in 2011.12   Andreas Müller
• [U-Boot] SPI Test   Marek Vasut
  • [U-Boot] SPI Test   Matthias Fuchs
    • [U-Boot] SPI Test   Marek Vasut
      • [U-Boot] [PATCH] arm, davinci: add PLL0 prediv to da850 lowlevel setup   Ben Gardiner
      • [U-Boot] [PATCH] arm, davinci: add PLL0 prediv to da850 lowlevel setup   Heiko Schocher
      • [U-Boot] [PATCH] arm, davinci: add PLL0 prediv to da850 lowlevel setup   Christian Riesch
      • [U-Boot] [PATCH] arm, davinci: add PLL0 prediv to da850 lowlevel setup   Tom Rini
• [U-Boot] [GIT PULL] please pull u-boot-mpc85xx   Tabi Timur-B04825
  • [U-Boot] [GIT PULL] please pull u-boot-mpc85xx   Timur Tabi
    • [U-Boot] [RESEND PATCH v3 0/6] Introduce generic relocation feature   Simon Glass
    • [U-Boot] [RESEND PATCH v3 1/6] Create reloc.h and include it where needed   Simon Glass
    • [U-Boot] [RESEND PATCH v3 2/6] define CONFIG_SYS_SKIP_RELOC for all archs   Simon Glass
    • [U-Boot] [RESEND PATCH v3 3/6] Add generic relocation feature   Simon Glass
    • [U-Boot] [RESEND PATCH v3 4/6] arm: Add processor function library   Simon Glass
    • [U-Boot] [RESEND PATCH v3 5/6] arm: Move over to generic relocation   Simon Glass
    • [U-Boot] [RESEND PATCH v3 6/6] arm: Remove unused code in start.S   Simon Glass
• [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Zach Sadecki
  • [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Wolfgang Denk
    • [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Dirk Behme
      • [U-Boot] [PATCH 2/2] net: move bootfile init into eth_initialize   Mike Frysinger
• [U-Boot] Uboot for PowerPC MPC8313   Ankur Singh
  • [U-Boot] [PATCH v3 0/9] tegra: Enable keyboard with matrix keyboard driver   Simon Glass
  • [U-Boot] [PATCH v3 1/9] fdt: Add fdtdec functions to read byte array   Simon Glass
  • [U-Boot] [PATCH v3 1/9] fdt: Add fdtdec functions to read byte array   Mike Frysinger
  • [U-Boot] [PATCH v3 1/9] fdt: Add fdtdec functions to read byte array   Simon Glass
  • [U-Boot] [PATCH v3 1/9] fdt: Add fdtdec functions to read byte array   Mike Frysinger
  • [U-Boot] [PATCH v3 2/9] input: Add linux/input.h for key code support   Simon Glass
  • [U-Boot] [PATCH v3 3/9] input: Add generic keyboard input handler   Simon Glass
  • [U-Boot] [PATCH v3 4/9] tegra: Add keyboard support to funcmux   Simon Glass
  • [U-Boot] [PATCH v3 4/9] tegra: Add keyboard support to funcmux   Stephen Warren
  • [U-Boot] [PATCH v3 5/9] tegra: fdt: Add keyboard controller definition   Simon Glass
  • [U-Boot] [PATCH v3 5/9] tegra: fdt: Add keyboard controller definition   Stephen Warren
  • [U-Boot] [PATCH v3 6/9] tegra: fdt: Add keyboard definitions for Seaboard   Simon Glass
  • [U-Boot] [PATCH v3 7/9] tegra: Add tegra keyboard driver   Simon Glass
  • [U-Boot] [PATCH v3 7/9] tegra: Add tegra keyboard driver   Stephen Warren
  • [U-Boot] [PATCH v3 8/9] tegra: Switch on console mux and use environment for console   Simon Glass
  • [U-Boot] [PATCH v3 9/9] tegra: Enable keyboard for Seaboard   Simon Glass
  • [U-Boot] [PATCH 0/3] Bring in new I2C framework   Simon Glass
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Simon Glass
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Mike Frysinger
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Tabi Timur-B04825
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Mike Frysinger
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Timur Tabi
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Simon Glass
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Timur Tabi
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Simon Glass
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Timur Tabi
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Heiko Schocher
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Simon Glass
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Heiko Schocher
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Simon Glass
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Simon Glass
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Timur Tabi
  • [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support   Heiko Schocher
  • [U-Boot] [PATCH 2/3] i2c: common changes for multibus/multiadapter support   Simon Glass
  • [U-Boot] [PATCH 3/3] WIP: tegra: i2c: Enable new I2C framework   Simon Glass
  • [U-Boot] [PATCH 3/3] WIP: tegra: i2c: Enable new I2C framework   Heiko Schocher
  • [U-Boot] [PATCH 0/3] Bring in new I2C framework   Heiko Schocher
  • [U-Boot] [PATCH] common, menu: do not trigger timeout again, if a line is read   Heiko Schocher
  • [U-Boot] [PATCH] common, menu: do not trigger timeout again, if a line is read   Jason Hobbs
  • [U-Boot] [PATCH] common, menu: do not trigger timeout again, if a line is read   Mike Frysinger
  • [U-Boot] [PATCH] common, menu: do not trigger timeout again, if a line is read   Heiko Schocher
  • [U-Boot] [PATCH v2] common, menu: do not timeout again if an item was selected but not found   Heiko Schocher
  • [U-Boot] [PATCH 1/8 v2] powerpc/srio: Rewrite the struct ccsr_rio   Liu Gang
  • [U-Boot] [PATCH 2/8 v2] powerpc/corenet_ds: Correct the compilation errors about ENV   Liu Gang
  • [U-Boot] [PATCH 3/8 v2] powerpc/corenet_ds: Document for the boot from SRIO   Liu Gang
  • [U-Boot] [PATCH 4/8 v2] powerpc/corenet_ds: Master module for boot from SRIO   Liu Gang
  • [U-Boot] [PATCH 5/8 v2] powerpc/corenet_ds: Slave module for boot from SRIO   Liu Gang
  • [U-Boot] [PATCH 7/8 v2] powerpc/corenet_ds: Slave reads ENV from master when boot from SRIO   Liu Gang
  • [U-Boot] [PATCH 8/8 v2] powerpc/corenet_ds: Slave core in holdoff when boot from SRIO   Liu Gang
  • [U-Boot] [PATCH 6/8 v2] powerpc/corenet_ds: Slave uploads ucode when boot from SRIO   Liu Gang
• [U-Boot] [PATCH 1/2] image: add support for Android's boot image format   Aneesh V
  • [U-Boot] [PATCH] imx6: mx6qarm2: updated   Stefano Babic
  • [U-Boot] [PATCH] imx6: mx6qarm2: updated   Dirk Behme
  • [U-Boot] [PATCH] imx6: mx6qarm2: updated   Fabio Estevam
  • [U-Boot] [PATCH] imx6: mx6qarm2: updated   Stefano Babic
  • [U-Boot] [PATCH V2] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype   Stefano Babic
  • [U-Boot] [PATCH V2] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype   Jason Hui
  • [U-Boot] [PATCH V2] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype   Stefano Babic
  • [U-Boot] [PATCH V3] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype   Stefano Babic
  • [U-Boot] [PATCH V3] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype   Jason Hui
• [U-Boot] OMAP3 performance regression in 2011.12   Aneesh V
  • [U-Boot] [PATCH v3 0/2] fdt: Deal correctly with alias nodes   Simon Glass
  • [U-Boot] [PATCH v3 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Simon Glass
  • [U-Boot] [PATCH v3 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Jerry Van Baren
  • [U-Boot] [PATCH v3 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Simon Glass
  • [U-Boot] [PATCH v3 2/2] fdt: Add tests for fdtdec   Simon Glass
  • [U-Boot] [PATCH v3 2/2] fdt: Add tests for fdtdec   Jerry Van Baren
  • [U-Boot] mxc_spi refactoring (for mx6q)   Eric Nelson
  • [U-Boot] [PATCH 5/6] mx6q: mx6qsabrelite: Provide default chip-select for serial flash   Eric Nelson
  • [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash   Eric Nelson
  • [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash   Jason Hui
  • [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash   Dirk Behme
  • [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash   Jason Hui
  • [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash   Stefano Babic
  • [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash   Eric Nelson
  • [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash   Eric Nelson
  • [U-Boot] mxc_spi refactoring (for mx6q)   Marek Vasut
  • [U-Boot] mxc_spi refactoring (for mx6q)   Dirk Behme
  • [U-Boot] [PATCH 1/6] mxc_spi: move machine specifics into CPU headers   Eric Nelson
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Marek Vasut
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Marek Vasut
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Marek Vasut
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Stefano Babic
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Marek Vasut
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Stefano Babic
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
  • [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Stefano Babic
  • [U-Boot] [PATCH 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Eric Nelson
  • [U-Boot] [PATCH 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Eric Nelson
• [U-Boot] U-Boot not auto booting   Michael Aldridge
• [U-Boot] [PATCH] nand_util: correct YAFFS image write function   Liu, Wentao
  • [U-Boot] [PATCH] nand_util: correct YAFFS image write function   Kassey Lee
    • [U-Boot] [PATCH] nand_util: correct YAFFS image write function   Scott Wood
      • [U-Boot] [PATCH] nand_util: correct YAFFS image write function   Lei Wen
• [U-Boot] [PATCH 1/2] S5P: support generic watchdog timer   Minkyu Kang
  • [U-Boot] [PATCH 1/2] S5P: support generic watchdog timer   Minkyu Kang
• [U-Boot] [PATCH 2/2] TRATS: use the generic watchdog timer   Minkyu Kang
  • [U-Boot] [PATCH 2/2] TRATS: use the generic watchdog timer   Minkyu Kang
• [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature   Albert ARIBAUD
  • [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH] ORIGEN: remove duplicated MACH_TYPE define   Minkyu Kang
  • [U-Boot] [PATCH] ORIGEN: remove duplicated MACH_TYPE define   Minkyu Kang
    • [U-Boot] [PATCH v2 1/3] ARM: I2C: I2C Multi byte address support   Patil, Rachna
    • [U-Boot] [PATCH v2 1/3] ARM: I2C: I2C Multi byte address support   Heiko Schocher
    • [U-Boot] [PATCH v2 1/3] ARM: I2C: I2C Multi byte address support   Tom Rini
    • [U-Boot] [PATCH v2 2/3] ARM: AM33XX: Add AM33XX I2C driver support   Patil, Rachna
    • [U-Boot] [PATCH v2 3/3] ARM: AM33XX: Add i2c support   Patil, Rachna
    • [U-Boot] [PATCH 1/3] mx28evk: add RTC support   Matthias Fuchs
    • [U-Boot] [PATCH 1/3] mx28evk: add RTC support   Marek Vasut
    • [U-Boot] [PATCH 1/3] mx28evk: add RTC support   Fabio Estevam
    • [U-Boot] [PATCH 1/3] mx28evk: add RTC support   Marek Vasut
    • [U-Boot] [PATCH 1/3] mx28evk: add RTC support   Fabio Estevam
    • [U-Boot] [PATCH 2/3] mx28evk: add USB support   Matthias Fuchs
    • [U-Boot] [PATCH 2/3] mx28evk: add USB support   Fabio Estevam
    • [U-Boot] [PATCH 2/3] mx28evk: add USB support   Fabio Estevam
    • [U-Boot] [PATCH 3/3] mx28evk: add SPI support   Matthias Fuchs
    • [U-Boot] [PATCH 3/3] mx28evk: add SPI support   Marek Vasut
    • [U-Boot] [PATCH 3/3] mx28evk: add SPI support   Matthias Fuchs
    • [U-Boot] [PATCH 3/3] mx28evk: add SPI support   Marek Vasut
    • [U-Boot] [PATCH 3/3] mx28evk: add SPI support   Fabio Estevam
• [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo   Matthias Fuchs
  • [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo   Fabio Estevam
    • [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo   Matthias Fuchs
    • [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo   Fabio Estevam
• [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo   Matthias Fuchs
• [U-Boot] [u-boot]: Uboot for MPC8641D uboot getting hanged just before relocating to ram   Purva Singh
  • [U-Boot] [PATCH] OMAP3: Correct get_sdr_cs_offset mask   Tom Rini
• [U-Boot] pull request: u-boot-tegra/master   Tom Warren
  • [U-Boot] pull request: u-boot-tegra/master   Albert ARIBAUD
    • [U-Boot] pull request: u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding   Simon Glass
  • [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding   Olof Johansson
    • [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding   Stephen Warren
    • [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding   Simon Glass
    • [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Dirk Behme
    • [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Simon Glass
    • [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Dirk Behme
    • [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back   Simon Glass
• [U-Boot] [PATCH v3] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Wolfgang Grandegger
  • [U-Boot] [PATCH v3] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
    • [U-Boot] mx6qsabrelite U-Boot from SPI-NOR   Eric Nelson
      • [U-Boot] mx6qsabrelite U-Boot from SPI-NOR   Wolfgang Grandegger
      • [U-Boot] mx6qsabrelite U-Boot from SPI-NOR   Eric Nelson
      • [U-Boot] [PATCH] README: update (C) entry   Wolfgang Denk
• [U-Boot] [PATCH] tt01: add MMC and video support --> howto avoid LOGO blobs   Helmut Raiger
  • [U-Boot] [PATCH] tt01: add video support and setup for release   Helmut Raiger
  • [U-Boot] [PATCH 1/3] tt01: fix environment size   Helmut Raiger
  • [U-Boot] [PATCH 2/3] tt01: add video support   Helmut Raiger
  • [U-Boot] [PATCH 3/3] tt01: fix hush parser config, add release config   Helmut Raiger
• [U-Boot] uboot configuration for uImage   manishdkanchan
• [U-Boot] [RFC] CDC Ethernet support + USB Gadget in U-boot   subhashini
• [U-Boot] fdt patches for Tegra   Tom Warren
  • [U-Boot] fdt patches for Tegra   Jerry Van Baren
  • [U-Boot] fdt patches for Tegra   Jerry Van Baren
    • [U-Boot] [PATCH 00/28] Add link-local addressing support   Joe Hershberger
    • [U-Boot] [PATCH 05/28] net: Move CDP out of net.c   Joe Hershberger
    • [U-Boot] [PATCH 05/28] net: Move CDP out of net.c   Simon Glass
    • [U-Boot] [PATCH 08/28] net: Move RARP receive logic out of net.c   Joe Hershberger
    • [U-Boot] [PATCH 08/28] net: Move RARP receive logic out of net.c   Simon Glass
    • [U-Boot] [PATCH 10/28] net: cosmetic: Improve variable names and code readability   Joe Hershberger
    • [U-Boot] [PATCH 10/28] net: cosmetic: Improve variable names and code readability   Simon Glass
    • [U-Boot] [PATCH 28/28] net: Allow filtering on debug traces in the net subsystem   Joe Hershberger
    • [U-Boot] [PATCH 00/28] Add link-local addressing support   Stefano Babic
    • [U-Boot] [PATCH 00/28] Add link-local addressing support   Joe Hershberger
    • [U-Boot] [PATCH 00/28] Add link-local addressing support   Stefano Babic
    • [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface   Joe Hershberger
    • [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface   Simon Glass
    • [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface   Joe Hershberger
    • [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface   Simon Glass
    • [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface   Joe Hershberger
    • [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance   Joe Hershberger
    • [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance   Simon Glass
    • [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance   Joe Hershberger
    • [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance   Simon Glass
    • [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance   Stefano Babic
    • [U-Boot] [PATCH 03/28] net: Move mv64x6x_eth_initialize() to board_eth_init()   Joe Hershberger
    • [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net   Joe Hershberger
    • [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net   Simon Glass
    • [U-Boot] [PATCH 06/28] net: Move ARP out of net.c   Joe Hershberger
    • [U-Boot] [PATCH 06/28] net: Move ARP out of net.c   Simon Glass
    • [U-Boot] [PATCH 07/28] net: Move PING out of net.c   Joe Hershberger
    • [U-Boot] [PATCH 07/28] net: Move PING out of net.c   Simon Glass
    • [U-Boot] [PATCH 09/28] net: cosmetic: Un-typedef variables in net   Joe Hershberger
    • [U-Boot] [PATCH 11/28] net: Refactor IP, UPD, and ICMP header writing functions   Joe Hershberger
    • [U-Boot] [PATCH 11/28] net: Refactor IP, UPD, and ICMP header writing functions   Simon Glass
    • [U-Boot] [PATCH 12/28] net: Refactor packet length computations   Joe Hershberger
    • [U-Boot] [PATCH 12/28] net: Refactor packet length computations   Simon Glass
    • [U-Boot] [PATCH 13/28] net: Refactor bootp packet length computations   Joe Hershberger
    • [U-Boot] [PATCH 13/28] net: Refactor bootp packet length computations   Simon Glass
    • [U-Boot] [PATCH 13/28] net: Refactor bootp packet length computations   Joe Hershberger
    • [U-Boot] [PATCH 14/28] net: Refactor ping recieve handler   Joe Hershberger
    • [U-Boot] [PATCH 15/28] net: Refactor to call NetSendPacket() instead of calling eth_send()   Joe Hershberger
    • [U-Boot] [PATCH 16/28] net: Refactor to protect access to the NetState variable   Joe Hershberger
    • [U-Boot] [PATCH 17/28] net: Refactor to separate the UDP handler from the ARP handler   Joe Hershberger
    • [U-Boot] [PATCH 18/28] net: Add NetUpdateEther() to handle ARP or Ping replies (VLAN or SNAP)   Joe Hershberger
    • [U-Boot] [PATCH 19/28] net: Don't write the "serverip" env var if told not to in the config   Joe Hershberger
    • [U-Boot] [PATCH 20/28] net: Fix compile warning if CONFIG_BOOTP_SERVERIP is not defined   Joe Hershberger
    • [U-Boot] [PATCH 21/28] net: Remove unneeded static allocation for MAC address in PingSend()   Joe Hershberger
    • [U-Boot] [PATCH 22/28] net: Fix net buffer initialization   Joe Hershberger
    • [U-Boot] [PATCH 23/28] net: Refactor NetSendUDPPacket to share more code   Joe Hershberger
    • [U-Boot] [PATCH 24/28] net: Don't copy every packet that waits for an ARP   Joe Hershberger
    • [U-Boot] [PATCH 25/28] net: Add option CONFIG_BOOTP_CAN_FAIL   Joe Hershberger
    • [U-Boot] [PATCH 26/28] net: Add link-local addressing support   Joe Hershberger
    • [U-Boot] [PATCH 27/28] net: Work-around for brain-damaged Cisco routers with arp-proxy   Joe Hershberger
• [U-Boot] usage of i2c command in hush script   Sridhar Addagada
• [U-Boot] About mtest on boot   Érico Porto
  • [U-Boot] About mtest on boot   Anatolij Gustschin
    • [U-Boot] About mtest on boot   Érico Porto
    • [U-Boot] About mtest on boot   Érico Porto
    • [U-Boot] About mtest on boot   Érico Porto
• [U-Boot] [u-boot]   periyasamy samy
  • [U-Boot] New MIPS64R2 Target in QEMU   Zain Ahmed
    • [U-Boot] [PATCH] mtd/nand:Fix wrong usage of is_blank() in fsl_ifc_run_command   Prabhakar Kushwaha
    • [U-Boot] [PATCH] [v2] mtd/nand: Fix IFC driver to support 2K NAND page   Prabhakar Kushwaha
    • [U-Boot] [PATCH] sandbox: add ifdef protection to os.h   Mike Frysinger
    • [U-Boot] [PATCH] sandbox: add ifdef protection to os.h   Simon Glass
    • [U-Boot] [PATCH 1/3] cmd_mem: replace custom PRINTF() with debug()   Mike Frysinger
    • [U-Boot] [PATCH 2/3] cmd_mem: cmp: unify size code paths   Mike Frysinger
    • [U-Boot] [PATCH 3/3] cmd_mem: cmp: convert while() to for() loop   Mike Frysinger
• [U-Boot] USBTTY for CONFIG_USB_GADGET   Michael Schwartz
  • [U-Boot] USBTTY for CONFIG_USB_GADGET   Stefano Babic
    • [U-Boot] [PATCH v2] main: unify command parsing functions   Michael Walle
    • [U-Boot] [PATCH v2] main: unify command parsing functions   Michael Walle
    • [U-Boot] [PATCH v2] main: unify command parsing functions   Simon Glass
• [U-Boot] LL TEMAC v9 refactored   Stephan Linz
  • [U-Boot] [PATCH 1/6] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
  • [U-Boot] [PATCH 1/6] net: ll_temac: Add LL TEMAC driver to u-boot   Michal Simek
  • [U-Boot] [PATCH 1/6] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
  • [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation   Stephan Linz
  • [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation   Mike Frysinger
  • [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation   Stephan Linz
  • [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation   Mike Frysinger
  • [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation   Wolfgang Denk
  • [U-Boot] [PATCH 3/6] microblaze: Wire up LL_TEMAC driver initialization   Stephan Linz
  • [U-Boot] [PATCH 4/6] microblaze: Enable phylib and mii support   Stephan Linz
  • [U-Boot] [PATCH 5/6] microblaze: Enable TFTP put command   Stephan Linz
  • [U-Boot] [PATCH 6/6] microblaze: Add faked LL_TEMAC driver configuration   Stephan Linz
  • [U-Boot] [PATCH] integrator: stop calling pci_init() twice   Linus Walleij
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
  • [U-Boot] uboot configuration for uImage   manish kanchan
• [U-Boot] device tree compilation problems.   hanumant
  • [U-Boot] device tree compilation problems.   Simon Glass
    • [U-Boot] device tree compilation problems.   Wolfgang Denk
      • [U-Boot] [PATCH] mx28: Show CPU frequency   Fabio Estevam
      • [U-Boot] [PATCH] mx28: Show CPU frequency   Marek Vasut
      • [U-Boot] [PATCH] mx28: Show CPU frequency   Fabio Estevam
      • [U-Boot] [PATCH] mx28: Show CPU frequency   Stefano Babic
      • [U-Boot] [PATCH] mx28: Show CPU frequency   Marek Vasut
      • [U-Boot] [PATCH] mx28: Show CPU frequency   Stefano Babic
• [U-Boot] [U-Boot-Users]   periyasamy samy
  • [U-Boot] [U-Boot-Users]   Prabhakar Lad
  • [U-Boot] [U-Boot-Users]   Wolfgang Denk
    • [U-Boot] [PATCH 0/6] sandbox: spi/sf emulation   Mike Frysinger
    • [U-Boot] [PATCH 1/6] sandbox: add lseek helper   Mike Frysinger
    • [U-Boot] [PATCH 1/6] sandbox: add lseek helper   Simon Glass
    • [U-Boot] [PATCH 2/6] sandbox: add getopt support   Mike Frysinger
    • [U-Boot] [PATCH 3/6] sandbox: SPI emulation bus   Mike Frysinger
    • [U-Boot] [PATCH 3/6] sandbox: SPI emulation bus   Simon Glass
    • [U-Boot] [PATCH 3/6] sandbox: SPI emulation bus   Mike Frysinger
    • [U-Boot] [PATCH 4/6] sandbox: new SPI flash driver   Mike Frysinger
    • [U-Boot] [PATCH 4/6] sandbox: new SPI flash driver   Simon Glass
    • [U-Boot] [PATCH 4/6] sandbox: new SPI flash driver   Mike Frysinger
    • [U-Boot] [PATCH 5/6] sandbox: enable new spi/sf layers   Mike Frysinger
    • [U-Boot] [PATCH 6/6] sandbox: add getenv support   Mike Frysinger
    • [U-Boot] [PATCH 6/6] sandbox: add getenv support   Simon Glass
    • [U-Boot] [PATCH 6/6] sandbox: add getenv support   Mike Frysinger
    • [U-Boot] [PATCH v3 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL   Simon Glass
    • [U-Boot] [PATCH v3 2/8] sandbox: config: Enable fdt and snprintf() options   Simon Glass
    • [U-Boot] [PATCH v3 3/8] sandbox: gpio: Add basic driver for simulating GPIOs   Simon Glass
    • [U-Boot] [PATCH v3 4/8] sandbox: Enable GPIO driver   Simon Glass
    • [U-Boot] [PATCH v3 5/8] sandbox: Add concept of sandbox state   Simon Glass
    • [U-Boot] [PATCH v3 5/8] sandbox: Add concept of sandbox state   Mike Frysinger
    • [U-Boot] [PATCH v3 6/8] sandbox: Allow processing instead of or before main loop   Simon Glass
    • [U-Boot] [PATCH v3 7/8] sandbox: Add flags for open() call   Simon Glass
    • [U-Boot] [PATCH v3 7/8] sandbox: Add flags for open() call   Mike Frysinger
    • [U-Boot] [PATCH v3 8/8] sandbox: Add basic command line parsing   Simon Glass
    • [U-Boot] [PATCH v4 0/4] Add SMDK5250 board support   Chander Kashyap
    • [U-Boot] [PATCH v4 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro   Chander Kashyap
    • [U-Boot] [PATCH v4 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Chander Kashyap
    • [U-Boot] [PATCH v4 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
    • [U-Boot] [PATCH v4 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
    • [U-Boot] [PATCH v4 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
    • [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Patil, Rachna
    • [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support   Heiko Schocher
    • [U-Boot] [PATCH v3 2/3] ARM: AM33XX: Add AM33XX I2C driver support   Patil, Rachna
    • [U-Boot] [PATCH v3 2/3] ARM: AM33XX: Add AM33XX I2C driver support   Heiko Schocher
    • [U-Boot] [PATCH v3 3/3] ARM: AM33XX: Add i2c support   Patil, Rachna
    • [U-Boot] [PATCH v3 3/3] ARM: AM33XX: Add i2c support   Heiko Schocher
• [U-Boot] About mtest on boot   Érico Porto
  • [U-Boot] About mtest on boot   Wolfgang Denk
    • [U-Boot] About mtest on boot   Érico Porto
    • [U-Boot] About mtest on boot   Wolfgang Denk
    • [U-Boot] About mtest on boot   Érico Porto
    • [U-Boot] [PATCH V2 0/6] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Eric Nelson
    • [U-Boot] [PATCH V2 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
    • [U-Boot] [PATCH V2 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Stefano Babic
    • [U-Boot] [PATCH V2 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Eric Nelson
    • [U-Boot] [PATCH V2 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Stefano Babic
    • [U-Boot] [PATCH V2 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Eric Nelson
    • [U-Boot] [PATCH V2 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Stefano Babic
    • [U-Boot] [PATCH V2 5/6] mx6q: mx6qsabrelite: Provide default chip-select for serial flash   Eric Nelson
    • [U-Boot] [PATCH V2 5/6] mx6q: mx6qsabrelite: Provide default chip-select for serial flash   Stefano Babic
    • [U-Boot] [PATCH V2 6/6] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash   Eric Nelson
    • [U-Boot] [PATCH V2 0/6] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Fabio Estevam
    • [U-Boot] [PATCH V2 0/6] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Eric Nelson
    • [U-Boot] [PATCH V2 1/6] mxc_spi: move machine specifics into CPU headers   Eric Nelson
    • [U-Boot] [PATCH V2 1/6] mxc_spi: move machine specifics into CPU headers   Stefano Babic
    • [U-Boot] gen_atmel_mci: CMDR 000d1052 (18) ARGR 0000ec00 (SR: 0000c0d7) XFER DTIP never unset, ignoring   Silent Hill
• [U-Boot] serial : Device tree support for multiple serial devices.   hanumant
  • [U-Boot] serial : Device tree support for multiple serial devices.   Simon Glass
    • [U-Boot] serial : Device tree support for multiple serial devices.   hanumant
• [U-Boot] u-boot script "test"   Sridhar Addagada
  • [U-Boot] u-boot script "test"   Wolfgang Denk
    • [U-Boot] u-boot script "test"   Sridhar Addagada
      • [U-Boot] [PATCH v4] tools/env: add posibility to inject configuration   Andreas Bießmann
      • [U-Boot] [PATCH] SMDK5250: Add ethernet support   Chander Kashyap
      • [U-Boot] [PATCH] SMDK5250: Add ethernet support   Simon Glass
      • [U-Boot] [PATCH] SMDK5250: Add ethernet support   Mike Frysinger
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
      • [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only   Pali Rohár
      • [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only   Marek Vasut
      • [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only   Tom Rini
      • [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only   Tom Rini
      • [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c   Pali Rohár
      • [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c   Marek Vasut
      • [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c   Pali Rohár
      • [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c   Marek Vasut
      • [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c   Pali Rohár
      • [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c   Marek Vasut
      • [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c   Pali Rohár
      • [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c   Marek Vasut
      • [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c   Pali Rohár
      • [U-Boot] [PATCH 03/14] Add power bus message definitions in twl4030.h   Pali Rohár
      • [U-Boot] [PATCH 03/14] Add power bus message definitions in twl4030.h   Marek Vasut
      • [U-Boot] [PATCH 03/14] Add power bus message definitions in twl4030.h   Pali Rohár
      • [U-Boot] [PATCH 03/14] Add power bus message definitions in twl4030.h   Igor Grinberg
      • [U-Boot] [PATCH 04/14] Fix function readline in main.c   Pali Rohár
      • [U-Boot] [PATCH 04/14] Fix function readline in main.c   Marek Vasut
      • [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Pali Rohár
      • [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Marek Vasut
      • [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup   Pali Rohár
      • [U-Boot] [PATCH 06/14] cfb_console: Add function console_clear and console_clear_line   Pali Rohár
      • [U-Boot] [PATCH 06/14] cfb_console: Add function console_clear and console_clear_line   Marek Vasut
      • [U-Boot] [PATCH 06/14] cfb_console: Add function console_clear and console_clear_line   Pali Rohár
      • [U-Boot] [PATCH 06/14] cfb_console: Add function console_clear and console_clear_line   Marek Vasut
      • [U-Boot] [PATCH 07/14] cfb_console: Add functions for moving with cursor   Pali Rohár
      • [U-Boot] [PATCH 08/14] cfb_console: Add support for some ANSI terminal escape codes   Pali Rohár
      • [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal   Pali Rohár
      • [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal   Marek Vasut
      • [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal   Pali Rohár
      • [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal   Marek Vasut
      • [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD   Pali Rohár
      • [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD   Marek Vasut
      • [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD   Pali Rohár
      • [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD   Marek Vasut
      • [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD   Pali Rohár
      • [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR   Pali Rohár
      • [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR   Marek Vasut
      • [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR   Pali Rohár
      • [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR   Marek Vasut
      • [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR   Pali Rohár
      • [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR   Marek Vasut
      • [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR   Pali Rohár
      • [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR   Marek Vasut
      • [U-Boot] [PATCH 12/14] New board support: Nokia RX-51 aka N900   Pali Rohár
      • [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support   Pali Rohár
      • [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support   Marek Vasut
      • [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support   Pali Rohár
      • [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support   Sergey Lapin
      • [U-Boot] [PATCH 14/14] RX-51: Add support for bootmenu   Pali Rohár
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Graeme Russ
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Sergey Lapin
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Sergey Lapin
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Sergey Lapin
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Pali Rohár
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Marek Vasut
      • [U-Boot] [PATCH 00/14] Nokia RX-51 support   Graeme Russ
      • [U-Boot] [PATCH V3 0/6] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Eric Nelson
      • [U-Boot] [PATCH V3 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Eric Nelson
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Eric Nelson
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Fabio Estevam
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Mike Frysinger
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Eric Nelson
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Mike Frysinger
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Eric Nelson
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Matthias Fuchs
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Mike Frysinger
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Eric Nelson
      • [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS   Mike Frysinger
      • [U-Boot] [PATCH V3 5/6] mx6q: mx6qsabrelite: Provide default chip-select for serial flash   Eric Nelson
      • [U-Boot] [PATCH V3 6/6] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash   Eric Nelson
      • [U-Boot] [PATCH V3 1/6] mxc_spi: move machine specifics into CPU headers   Eric Nelson
      • [U-Boot] [PATCH V3 2/6] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
    • [U-Boot] bootelf command for Pandaboard   Boban Petrovic
      • [U-Boot] bootelf command for Pandaboard   Wolfgang Denk
      • [U-Boot] [RFC] mx28: Fix reboot from the kernel   Fabio Estevam
      • [U-Boot] [RFC] mx28: Fix reboot from the kernel   Marek Vasut
      • [U-Boot] [RFC] mx28: Fix reboot from the kernel   Fabio Estevam
      • [U-Boot] [RFC] mx28: Fix reboot from the kernel   Marek Vasut
      • [U-Boot] [RFC] mx28: Fix reboot from the kernel   Fabio Estevam
      • [U-Boot] [RFC] mx28: Fix reboot from the kernel   Marek Vasut
      • [U-Boot] [RFC] mx28: Fix reboot from the kernel   Matthias Fuchs
      • [U-Boot] [RFC] mx28: Fix reboot from the kernel   Stefano Babic
• [U-Boot] non SPL boot on beagleboard-xm   Peter Meerwald
  • [U-Boot] non SPL boot on beagleboard-xm   Tom Rini
    • [U-Boot] non SPL boot on beagleboard-xm   Peter Meerwald
    • [U-Boot] non SPL boot on beagleboard-xm   Tom Rini
    • [U-Boot] non SPL boot on beagleboard-xm   Peter Meerwald
    • [U-Boot] non SPL boot on beagleboard-xm   Tom Rini
    • [U-Boot] non SPL boot on beagleboard-xm   Marek Vasut
    • [U-Boot] [PATCH v5 1/3] PXA: PXA27x Matrix keypad driver   Vasily Khoruzhick
    • [U-Boot] [PATCH v5 2/3] zipitz2: enable pxa27x_mkp driver   Vasily Khoruzhick
    • [U-Boot] [PATCH v5 3/3] zipitz2: use pxa_mmc_gen as MMC driver   Vasily Khoruzhick
    • [U-Boot] [PATCH v5 1/3] PXA: PXA27x Matrix keypad driver   Marek Vasut
    • [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver   Simon Glass
    • [U-Boot] [PATCH v5 01/18] fdt: Add basic support for decoding GPIO definitions   Simon Glass
    • [U-Boot] [PATCH v5 02/18] arm: fdt: Ensure that an embedded fdt is word-aligned   Simon Glass
    • [U-Boot] [PATCH v5 03/18] arm: fdt: Add skeleton device tree file from kernel   Simon Glass
    • [U-Boot] [PATCH v5 04/18] tegra: fdt: Add Tegra2x device tree file from kernel   Simon Glass
    • [U-Boot] [PATCH v5 05/18] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel   Simon Glass
    • [U-Boot] [PATCH v5 06/18] fdt: Add staging area for device tree binding documentation   Simon Glass
    • [U-Boot] [PATCH v5 07/18] fdt: Add tegra-usb bindings file from linux   Simon Glass
    • [U-Boot] [PATCH v5 08/18] tegra: fdt: Add additional USB binding   Simon Glass
    • [U-Boot] [PATCH v5 09/18] tegra: fdt: Add clock bindings   Simon Glass
    • [U-Boot] [PATCH v5 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
    • [U-Boot] [PATCH v5 11/18] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Simon Glass
    • [U-Boot] [PATCH v5 12/18] usb: Add support for txfifo threshold   Simon Glass
    • [U-Boot] [PATCH v5 13/18] fdt: Add function to return peripheral/clock ID   Simon Glass
    • [U-Boot] [PATCH v5 14/18] tegra: usb: Add support for Tegra USB peripheral   Simon Glass
    • [U-Boot] [PATCH v5 15/18] tegra: usb: Add USB support to nvidia boards   Simon Glass
    • [U-Boot] [PATCH v5 16/18] tegra: usb: Add common USB defines for tegra2 boards   Simon Glass
    • [U-Boot] [PATCH v5 17/18] tegra: usb: Enable USB on Seaboard   Simon Glass
    • [U-Boot] [PATCH v5 18/18] tegra: fdt: Enable FDT support for Seaboard   Simon Glass
  • [U-Boot] u-boot-atmel support for SMSC9514   Wilson Perez
    • [U-Boot] u-boot-atmel support for SMSC9514   Wolfgang Denk
    • [U-Boot] u-boot-atmel support for SMSC9514   Marek Vasut
  • [U-Boot] Last version for AT91RM9200-DK   Digital Shadow
    • [U-Boot] Last version for AT91RM9200-DK   Marek Vasut
      • [U-Boot] [PATCH v5 0/4] Add SMDK5250 board support   Chander Kashyap
      • [U-Boot] [PATCH v5 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro   Chander Kashyap
      • [U-Boot] [PATCH v5 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Chander Kashyap
      • [U-Boot] [PATCH v5 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
      • [U-Boot] [PATCH v5 0/4] Add SMDK5250 board support   Chander Kashyap
      • [U-Boot] [PATCH v5 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
      • [U-Boot] [PATCH v6 0/4] Add SMDK5250 board support   Chander Kashyap
      • [U-Boot] [PATCH v6 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro   Chander Kashyap
      • [U-Boot] [PATCH v6 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs   Chander Kashyap
      • [U-Boot] [PATCH v6 3/4] EXYNOS: Add SMDK5250 board support   Chander Kashyap
      • [U-Boot] [PATCH v6 3/4] EXYNOS: Add SMDK5250 board support   Igor Grinberg
      • [U-Boot] [PATCH v6 4/4] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
      • [U-Boot] [PATCH] TRATS: Fix uart gpio config   Chander Kashyap
      • [U-Boot] [PATCH] TRATS: Fix uart gpio config   Marek Vasut
      • [U-Boot] [PATCH] TRATS: Fix uart gpio config   Minkyu Kang
• [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [U-Boot-Users] cross compiler   periyasamy samy
    • [U-Boot] [U-Boot-Users] cross compiler   Marek Vasut
• [U-Boot] [PATCH] am3517evm: remove rootfstype kernel parameter for MMC boot device   Yegor Yefremov
  • [U-Boot] [PATCH] am3517evm: remove rootfstype kernel parameter for MMC boot device   Tom Rini
    • [U-Boot] SPL Framework: Add support for U_BOOT_CMD   Prabhakar Lad
    • [U-Boot] SPL Framework: Add support for U_BOOT_CMD   Christian Riesch
    • [U-Boot] SPL Framework: Add support for U_BOOT_CMD   Prabhakar Lad
    • [U-Boot] SPL Framework: Add support for U_BOOT_CMD   Christian Riesch
    • [U-Boot] SPL Framework: Add support for U_BOOT_CMD   Tom Rini
    • [U-Boot] SPL Framework: Add support for U_BOOT_CMD   Scott Wood
    • [U-Boot] SPL Framework: Add support for U_BOOT_CMD   Tom Rini
    • [U-Boot] SPL Framework: Add support for U_BOOT_CMD   Wolfgang Denk
    • [U-Boot] SPL Framework: Add support for U_BOOT_CMD   Christian Riesch
  • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Andreas Müller
    • [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms   Tom Rini
• [U-Boot] SPL Linux Boot   Stefano Babic
  • [U-Boot] SPL Linux Boot   Tom Rini
    • [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver   Ajay Bhargav
    • [U-Boot] [PATCH 2/3] USB: Armada100: ECHI Driver for Armada100 SOCs   Ajay Bhargav
    • [U-Boot] [PATCH 2/3] USB: Armada100: ECHI Driver for Armada100 SOCs   Prafulla Wadaskar
    • [U-Boot] [PATCH 2/3] USB: Armada100: ECHI Driver for Armada100 SOCs   Ajay Bhargav
    • [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver   Prafulla Wadaskar
    • [U-Boot] [PATCH 3/3] Armada100: gplugD: Add USB command support   Ajay Bhargav
    • [U-Boot] [PATCH 3/3] Armada100: gplugD: Add USB command support   Prafulla Wadaskar
    • [U-Boot] [PATCH 3/3] Armada100: gplugD: Add USB command support   Ajay Bhargav
    • [U-Boot] [PATCH 1/2] at91: modified NAND flash timing on meesc board   Daniel Gorsulowski
    • [U-Boot] [PATCH 2/2] at91: modified NAND flash timing on otc570 board   Daniel Gorsulowski
• [U-Boot] mx28 spl power cpu clock configuration   Robert Deliën
• [U-Boot] mx28 spl power cpu clock configuration   Marek Vasut
  • [U-Boot] mx28 spl power cpu clock configuration   Fabio Estevam
    • [U-Boot] mx28 spl power cpu clock configuration   Robert Deliën
      • [U-Boot] mx28 spl power cpu clock configuration   Marek Vasut
      • [U-Boot] mx28 spl power cpu clock configuration   Robert Deliën
      • [U-Boot] mx28 spl power cpu clock configuration   Marek Vasut
      • [U-Boot] mx28 spl power cpu clock configuration   Robert Deliën
      • [U-Boot] mx28 spl power cpu clock configuration   Marek Vasut
      • [U-Boot] mx28 spl power cpu clock configuration   Robert Deliën
      • [U-Boot] mx28 spl power cpu clock configuration   Fabio Estevam
      • [U-Boot] mx28 spl power cpu clock configuration   Marek Vasut
      • [U-Boot] mx28 spl power cpu clock configuration   Fabio Estevam
      • [U-Boot] mx28 spl power cpu clock configuration   Marek Vasut
      • [U-Boot] mx28 spl power cpu clock configuration   Robert Deliën
    • [U-Boot] mx28 spl power cpu clock configuration   Marek Vasut
      • [U-Boot] mx28 spl power cpu clock configuration   Fabio Estevam
      • [U-Boot] mx28 spl power cpu clock configuration   Marek Vasut
      • [U-Boot] mx28 spl power cpu clock configuration   Robert Deliën
• [U-Boot] u-boot script "test"   James Chargin
  • [U-Boot] [PATCH v6 1/3] PXA: PXA27x Matrix keypad driver   Vasily Khoruzhick
  • [U-Boot] [PATCH v6 2/3] zipitz2: enable pxa27x_mkp driver   Vasily Khoruzhick
  • [U-Boot] [PATCH v6 3/3] zipitz2: use pxa_mmc_gen as MMC driver   Vasily Khoruzhick
  • [U-Boot] [PATCH v6 1/3] PXA: PXA27x Matrix keypad driver   Marek Vasut
  • [U-Boot] [PATCH v6 1/3] PXA: PXA27x Matrix keypad driver   Vasily Khoruzhick
  • [U-Boot] [PATCH v6 1/3] PXA: PXA27x Matrix keypad driver   Marek Vasut
  • [U-Boot] [PATCH 1/2] ARM: tegra: Define Tegra20 CAR binding   Stephen Warren
  • [U-Boot] [PATCH 2/2] ARM: tegra: Add clock binding to tegra-seabaord.dts   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: tegra: Define Tegra20 CAR binding   Simon Glass
  • [U-Boot] [PATCH 1/2] ARM: tegra: Define Tegra20 CAR binding   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: tegra: Define Tegra20 CAR binding   Simon Glass
  • [U-Boot] u-boot on beagleboard finds incorrect memory size.   wilsonjonathan
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Tom Rini
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   wilsonjonathan
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Tom Rini
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   wilsonjonathan
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Tom Rini
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Robert Nelson
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Tom Rini
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   wilsonjonathan
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   wilsonjonathan
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Tom Rini
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Robert Nelson
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Tom Rini
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Robert Nelson
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Robert Nelson
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Tom Rini
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Robert Nelson
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   wilsonjonathan
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Tom Rini
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   Robert Nelson
    • [U-Boot] u-boot on beagleboard finds incorrect memory size.   wilsonjonathan
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] U-Boot for EVAL-SPEAR1310-CPU   Zeeshan Aslam
  • [U-Boot] U-Boot for EVAL-SPEAR1310-CPU   Wolfgang Denk
  • [U-Boot] [RFC Patch] e1000: Fix PCI memory addressing and fix for receive data polling   Ralf Rösch
• [U-Boot] [PATCH] TRATS: set gpio of UART correctly   Minkyu Kang
  • [U-Boot] [RFC Patch] e1000: Fix PCI memory addressing and fix for receive data polling   Ralf Rösch
    • [U-Boot] [RFC Patch] e1000: Fix PCI memory addressing and fix for receive data polling   Stefano Babic
  • [U-Boot] changes in uEnv.txt does not work   manish kanchan
• [U-Boot] Question regarding NAND environment   Peter Barada
  • [U-Boot] Question regarding NAND environment   Scott Wood
    • [U-Boot] Question regarding NAND environment   Peter Barada
      • [U-Boot] Question regarding NAND environment   Scott Wood
      • [U-Boot] Question regarding NAND environment   Peter Barada
      • [U-Boot] Question regarding NAND environment   Tom Rini
• [U-Boot] Pull request: nand flash   Scott Wood
  • [U-Boot] [PATCH 1/4] net: fec_mxc: add 1000 Mbps selection   Troy Kisky
  • [U-Boot] [PATCH 1/4] net: fec_mxc: add 1000 Mbps selection   Dirk Behme
  • [U-Boot] [PATCH 1/4] net: fec_mxc: add 1000 Mbps selection   Andy Fleming
  • [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support   Troy Kisky
  • [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support   Andy Fleming
  • [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support   Troy Kisky
  • [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021   Troy Kisky
  • [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021   Mike Frysinger
  • [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021   Troy Kisky
  • [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021   Andy Fleming
  • [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021   Troy Kisky
  • [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021   Andy Fleming
  • [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021   Troy Kisky
  • [U-Boot] [PATCH 4/4] i.mx6q: mx6qsabrelite: Update the network configuration   Troy Kisky
  • [U-Boot] [U-Boot-Users]-compilation error   periyasamy samy
    • [U-Boot] [U-Boot-Users]-compilation error   Christian Riesch
• [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver   Ajay Bhargav
  • [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver   Wolfgang Denk
    • [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver   Ajay Bhargav
      • [U-Boot] [PATCH] * Fix: watchdog timed out, if flash blank (0xFF) blocks   Jens Scharsig (BuS Elektronik)
      • [U-Boot] [PATCH]powerpc/8xxx:Add MPH controller support in USB device-tree fixup   Ramneek Mehresh
• [U-Boot] Pull request: Davinci uboot   Hadli, Manjunath
  • [U-Boot] Pull request: Davinci uboot   Christian Riesch
    • [U-Boot] Pull request: Davinci uboot   Tom Rini
  • [PATCH] ulpi: Modify the ulpi framework to accept port number   Govindraj.R
  • [U-Boot] [UPDATED] Please pull u-boot-ti/master   Tom Rini
    • [U-Boot] [UPDATED] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] beagle-xm boot logo / DSS in u-boot   Peter Meerwald
  • [U-Boot] [PATCHv2] OMAP3: Add Corscience Tricorder board   Thomas Weber
• [U-Boot] Changes in uEnv.txt does not work   manishdkanchan
  • [U-Boot] Changes in uEnv.txt does not work   Tom Rini
  • [U-Boot] How to make a u-boot that supports a particular board.   jagan
    • [U-Boot] How to make a u-boot that supports a particular board.   Sergey Lapin
• [U-Boot] [PREVIEW] LL TEMAC v10 refactored -- for evaluation only   Stephan Linz
  • [U-Boot] [PATCH 1/8] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
  • [U-Boot] [PATCH 2/8] microblaze: Enable several ethernet driver compilation   Stephan Linz
    • [U-Boot] [PATCH 2/8] microblaze: Enable several ethernet driver compilation   Michal Simek
    • [U-Boot] [PATCH 2/8] microblaze: Enable several ethernet driver compilation   Stephan Linz
  • [U-Boot] [PATCH 3/8] microblaze: Enable phylib and mii support   Stephan Linz
  • [U-Boot] [PATCH 4/8] microblaze: Enable TFTP put command   Stephan Linz
  • [U-Boot] [PATCH 5/8] microblaze: Xilinx BSP to U-Boot conversion matrix   Stephan Linz
  • [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration   Stephan Linz
    • [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration   Michal Simek
    • [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration   Stephan Linz
  • [U-Boot] [PATCH 7/8] microblaze: Wire up LL_TEMAC driver initialization   Stephan Linz
  • [U-Boot] [PATCH 8/8] microblaze: ll_temac: export xilinx_ll_temac_eth_init() for evaluation   Stephan Linz
    • [U-Boot] [PATCH V4 0/7] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Eric Nelson
    • [U-Boot] [PATCH V4 1/7] mxc_spi: move machine specifics into CPU headers   Eric Nelson
    • [U-Boot] [PATCH V4 1/7] mxc_spi: move machine specifics into CPU headers   Marek Vasut
    • [U-Boot] [PATCH V4 1/7] mxc_spi: move machine specifics into CPU headers   Eric Nelson
    • [U-Boot] [PATCH V4 2/7] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
    • [U-Boot] [PATCH V4 3/7] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Eric Nelson
    • [U-Boot] [PATCH V4 4/7] sf command: allow default bus and chip selects   Eric Nelson
    • [U-Boot] [PATCH V4 4/7] sf command: allow default bus and chip selects   Mike Frysinger
    • [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration   Eric Nelson
    • [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration   Marek Vasut
    • [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration   Eric Nelson
    • [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration   Mike Frysinger
    • [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration   Mike Frysinger
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Eric Nelson
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Marek Vasut
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Eric Nelson
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Marek Vasut
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Eric Nelson
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Marek Vasut
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Eric Nelson
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Marek Vasut
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Eric Nelson
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Marek Vasut
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Dirk Behme
    • [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Eric Nelson
    • [U-Boot] [PATCH V4 7/7] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash   Eric Nelson
• [U-Boot] [PATCH V4 0/7] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Eric Nelson
  • [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
• [U-Boot] Fwd: Re: U-Boot not auto booting   Helmut Raiger
  • [U-Boot] [PATCH] integrator: rewrite the AP PCI driver   Linus Walleij
  • [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Eric Nelson
  • [U-Boot] [PATCH 1/3] mxc_spi: move machine specifics into CPU headers   Eric Nelson
  • [U-Boot] [PATCH 1/3] mxc_spi: move machine specifics into CPU headers   Jason Hui
  • [U-Boot] [PATCH 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Eric Nelson
  • [U-Boot] [PATCH 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Jason Hui
  • [U-Boot] [PATCH 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Eric Nelson
  • [U-Boot] [PATCH 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Stefano Babic
  • [U-Boot] MX6q SPI refactoring and related patches   Eric Nelson
  • [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Jason Liu
  • [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Jason Hui
  • [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Eric Nelson
  • [U-Boot] [PATCH 2/3] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
  • [U-Boot] [PATCH 2/3] mx6q: Add support for ECSPI through mxc_spi driver   Jason Hui
  • [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects   Eric Nelson
  • [U-Boot] [PATCH 1/2] sf command: allow default bus and chip selects   Eric Nelson
  • [U-Boot] [PATCH 1/2] sf command: allow default bus and chip selects   Matthias Fuchs
  • [U-Boot] [PATCH 2/2] README: Add description of SPI Flash (SF) command configuration   Eric Nelson
  • [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects   Mike Frysinger
  • [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects   Eric Nelson
  • [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects   Dirk Behme
  • [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects   Mike Frysinger
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Eric Nelson
  • [U-Boot] [PATCH] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash   Eric Nelson
  • [U-Boot] [PATCH] omap_hsmmc: Wait for CMDI to be clear   Tom Rini
  • [U-Boot] [PATCH] omap_hsmmc: Wait for CMDI to be clear   Andreas Müller
  • [U-Boot] [PATCH] integrator: rewrite the AP PCI driver   Linus Walleij
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Marek Vasut
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Matthias Fuchs
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Marek Vasut
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Matthias Fuchs
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Fabio Estevam
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Marek Vasut
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Robert Deliën
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Marek Vasut
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Marek Vasut
  • [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup   Robert Deliën
  • [U-Boot] [PATCH] i.MX28: Make the stabilization delays shorter   Marek Vasut
  • [U-Boot] Can u-Boot Ran from RAM?   Bud Miljkovic
  • [U-Boot] Can u-Boot Ran from RAM?   Eric Nelson
  • [U-Boot] Can u-Boot Ran from RAM?   Mike Frysinger
  • [U-Boot] [PATCH V4] AT91: pio: Add PIO3 features   Hong Xu
  • [U-Boot] Memory testing of flash   vk
    • [U-Boot] Memory testing of flash   Wolfgang Denk
  • [U-Boot] flash post test   vk
• [U-Boot] SPL Linux Boot   Stefano Babic
  • [U-Boot] SPL Linux Boot   Tom Rini
    • [U-Boot] [PATCH] i.mx: i.mx5: update imx_get_mac_from_fuse function   Jason Liu
    • [U-Boot] [PATCH] i.mx: i.mx5: update imx_get_mac_from_fuse function   Fabio Estevam
    • [U-Boot] [PATCH] i.mx: i.mx5: update imx_get_mac_from_fuse function   Stefano Babic
    • [U-Boot] [PATCH v5 0/7] Change ARM926EJ-S startup code, hawkboard and calimain   Christian Riesch
    • [U-Boot] [PATCH v5 1/7] arm, davinci: Add lowlevel_init for SoCs other than DM644X   Christian Riesch
    • [U-Boot] [PATCH v5 2/7] arm, arm926ejs: Do cpu critical inits only for boards that require it   Christian Riesch
    • [U-Boot] [PATCH v5 3/7] arm, arm926ejs: Flush the data cache before disabling it   Christian Riesch
    • [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs   Christian Riesch
    • [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs   Sughosh Ganu
    • [U-Boot] [PATCH v5 5/7] arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined   Christian Riesch
    • [U-Boot] [PATCH v5 6/7] Changes to move hawkboard to the new spl infrastructure   Christian Riesch
    • [U-Boot] [PATCH v5 7/7] arm, davinci: Add support for the Calimain board from OMICRON electronics   Christian Riesch
• [U-Boot] mx28: booting u-boot via USB   Matthias Fuchs
  • [U-Boot] mx28: booting u-boot via USB   Sergey Lapin
    • [U-Boot] mx28: booting u-boot via USB   Matthias Fuchs
  • [U-Boot] mx28: booting u-boot via USB   Fabio Estevam
    • [U-Boot] mx28: booting u-boot via USB   Matthias Fuchs
• [U-Boot] Memory testing of flash   Wolfgang Denk
  • [U-Boot] [PATCH] OMAP SPL: Fix missing timer_init() call in OMAP4 s_init()   Nicolas Dechesne
  • [U-Boot] [PATCH V6 - Part 1 - 1/1] mx6q: define GPIO macros for translating between ordinals and port:index   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 2 - 1/3] mxc_spi: move machine specifics into CPU headers   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 2 - 2/3] mx6q: Add support for ECSPI through mxc_spi driver   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 2 - 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Mike Frysinger
  • [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 3 - 1/2] sf command: allow default bus and chip selects   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 2 - 2/2] README: Add description of SPI Flash (SF) command configuration   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 4 - 1/1] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 5 - 1/1] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash   Eric Nelson
  • [U-Boot] [PATCH V6 - Part 2 - 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)   Eric Nelson
  • [U-Boot] [PATCH 1/2] sf: eeprom_m95xxx: fix up style   Mike Frysinger
  • [U-Boot] [PATCH 2/2] sf: eeprom_m95xxx: set a sane default timeout   Mike Frysinger
  • [U-Boot] [PATCH 1/2] sf: drop unused/duplicate command defines   Mike Frysinger
  • [U-Boot] [PATCH 2/2] sf: spansion: inline useless id defines   Mike Frysinger
• [U-Boot] slow flash write with Freescale P1020 and PC28F256J3 NOR-flash   Daniel Nilsson
  • [U-Boot] slow flash write with Freescale P1020 and PC28F256J3 NOR-flash   Christian Riesch
    • [U-Boot] [PATCH 0/5 v2] sandbox: spi/sf emulation   Mike Frysinger
    • [U-Boot] [PATCH 4/5 v2] sandbox: new SPI flash driver   Mike Frysinger
    • [U-Boot] [PATCH 5/5 v2] sandbox: enable new spi/sf layers   Mike Frysinger
    • [U-Boot] [PATCH 1/5 v2] sandbox: add lseek helper   Mike Frysinger
    • [U-Boot] [PATCH 2/5 v2] sandbox: add getopt support   Mike Frysinger
    • [U-Boot] [PATCH 3/5 v2] sandbox: SPI emulation bus   Mike Frysinger
    • [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support   Tom Rini
    • [U-Boot] [PATCH 2/2] SPL: Enable YMODEM support on BeagleBone and AM335x EVM   Tom Rini
    • [U-Boot] [PATCH] integrator: update the Integrator/CP config   Linus Walleij