February 2020 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Feb 1 04:15:13 CET 2020
Ending: Sat Feb 29 18:47:06 CET 2020
Messages: 2991

• [PATCH 013/108] acpi: Add a binding for ACPI settings in the device tree   Simon Glass
  • Antwort: Re: [PATCH 013/108] acpi: Add a binding for ACPI settings in the device tree   Wolfgang Wallner
• Pull request: u-boot-rockchip-20200130   Kever Yang
  • Pull request: u-boot-rockchip-20200130   Tom Rini
• [Patchv4 1/3] mmc: meson-gx: Fix clk phase tuning for MMC   Neil Armstrong
  • [Patchv4 1/3] mmc: meson-gx: Fix clk phase tuning for MMC   Anand Moon
• [PATCH v2 0/2] gpio: add possibility to search for gpio label name   Heiko Schocher
  • [PATCH v2 1/2] sandbox, test: add test for GPIO_HOG function   Heiko Schocher
    • [PATCH v2 1/2] sandbox, test: add test for GPIO_HOG function   Simon Glass
  • [PATCH v2 2/2] gpio: search for gpio label if gpio is not found through bank name   Heiko Schocher
    • [PATCH v2 2/2] gpio: search for gpio label if gpio is not found through bank name   Simon Glass
      • [PATCH v2 2/2] gpio: search for gpio label if gpio is not found through bank name   Heiko Schocher
      • [PATCH v2 2/2] gpio: search for gpio label if gpio is not found through bank name   Simon Glass
• [PATCH] serial_lpuart: make clock failure less verbose   Lukasz Majewski
  • [PATCH] serial_lpuart: make clock failure less verbose   Giulio Benetti
• [PATCH v2 02/10] mmc: Add init() API   Peng Fan
  • [PATCH v2 02/10] mmc: Add init() API   Sekhar Nori
    • [PATCH v2 02/10] mmc: Add init() API   Michal Simek
  • [PATCH v2 02/10] mmc: Add init() API   Faiz Abbas
    • [PATCH v2 02/10] mmc: Add init() API   Peng Fan
      • [PATCH v2 02/10] mmc: Add init() API   Faiz Abbas
      • [PATCH v2 02/10] mmc: Add init() API   Wolfgang Denk
      • [PATCH v2 02/10] mmc: Add init() API   Tom Rini
      • [PATCH v2 02/10] mmc: Add init() API   Wolfgang Denk
      • [PATCH v2 02/10] mmc: Add init() API   Wolfgang Denk
      • [PATCH v2 02/10] mmc: Add init() API   Wolfgang Denk
      • [PATCH v2 02/10] mmc: Add init() API   Tom Rini
• [GIT PULL] UniPhier SoC updates for v2020.04 (2nd)   Tom Rini
• [PATCH] configs: imxrt1050-evk: enable D/I cache   Giulio Benetti
  • [PATCH] configs: imxrt1050-evk: enable D/I cache   Giulio Benetti
• [PATCH 1/1] efi_loader: architecture specific UEFI setup   Heinrich Schuchardt
  • [PATCH 1/1] efi_loader: architecture specific UEFI setup   Atish Patra
  • [PATCH 1/1] efi_loader: architecture specific UEFI setup   Heinrich Schuchardt
• [PATCH] cmd: Handle CONFIG_(SPL_)ENV_SUPPORT for toggling the nvedit object   Tom Rini
• [PATCH 1/2] mmc: update guard for legacy part_init() call   Thomas Hebb
  • [PATCH 1/2] mmc: update guard for legacy part_init() call   Tom Rini
    • [PATCH 1/2] mmc: update guard for legacy part_init() call   Tom Hebb
• [PATCH 2/2] spl: get rid of SPL_LIBDISK_SUPPORT   Thomas Hebb
  • [PATCH 2/2] spl: get rid of SPL_LIBDISK_SUPPORT   Felix Brack
  • [PATCH 2/2] spl: get rid of SPL_LIBDISK_SUPPORT   Simon Glass
• [PATCH v2 1/2] spl: Kconfig: Replace CONFIG_SPL_NET_SUPPORT with CONFIG_SPL_NET   Tom Rini
• [PATCH 1/1] test: test_efi_fit: fix pylint warnings   Heinrich Schuchardt
• [PATCH 1/1] test: efi_selftest: fix pylint warnings   Heinrich Schuchardt
• [PATCH 0/3] Support SDMA mode on RPI4 target - 32bit   Matthias Brugger
• [PATCH v2 07/11] riscv: Add initial Sipeed Maix support   Sean Anderson
• Fix for build error /uboot/driver/video/simplefb.c   ARJUN C R
  • Fix for build error /uboot/driver/video/simplefb.c   ARJUN C R
• [PATCH v2] cmd: Handle CONFIG_(SPL_|TPL_)ENV_SUPPORT for toggling nvedit object   Nathan Rossi
  • [PATCH v2] cmd: Handle CONFIG_(SPL_|TPL_)ENV_SUPPORT for toggling nvedit object   Wolfgang Denk
    • [PATCH v2] cmd: Handle CONFIG_(SPL_|TPL_)ENV_SUPPORT for toggling nvedit object   Nathan Rossi
• [PATCH] riscv: Remove unnecessary instruction   Bin Meng
• SDL 2.0 in gitlab   Simon Glass
  • SDL 2.0 in gitlab   Tom Rini
    • SDL 2.0 in gitlab   Simon Glass
• [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Sean Anderson
  • [PATCH 2/4] arm: Move asm/utils.h to log2.h   Sean Anderson
    • [PATCH 2/4] arm: Move asm/utils.h to log2.h   Sean Anderson
    • [PATCH 2/4] arm: Move asm/utils.h to log2.h   Simon Glass
      • [PATCH 2/4] arm: Move asm/utils.h to log2.h   Marek Vasut
      • [PATCH 2/4] arm: Move asm/utils.h to log2.h   Simon Glass
      • [PATCH 2/4] arm: Move asm/utils.h to log2.h   Sean Anderson
      • [PATCH 2/4] arm: Move asm/utils.h to log2.h   Simon Glass
  • [PATCH 3/4] wdt: Remove dependencies on CONFIG_DW_WDT_* from Designware WDT   Sean Anderson
    • [PATCH 3/4] wdt: Remove dependencies on CONFIG_DW_WDT_* from Designware WDT   Sean Anderson
  • [PATCH 4/4] wdt: Add DM support for Designware WDT   Sean Anderson
    • [PATCH 4/4] wdt: Add DM support for Designware WDT   Sean Anderson
      • [PATCH 4/4] wdt: Add DM support for Designware WDT   Simon Glass
      • [PATCH 4/4] wdt: Add DM support for Designware WDT   Sean Anderson
      • [PATCH 4/4] wdt: Add DM support for Designware WDT   Simon Glass
  • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Marek Vasut
    • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Sean Anderson
      • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Marek Vasut
      • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Sean Anderson
      • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Marek Vasut
      • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Sean Anderson
      • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Marek Vasut
      • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Sean Anderson
      • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Marek Vasut
  • [PATCH 1/4] wdt: Add CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Sean Anderson
• [PULL] u-boot-socfpga/master   Marek Vasut
  • [PULL] u-boot-socfpga/master   Tom Rini
    • [PULL] u-boot-socfpga/master   Marek Vasut
      • [PULL] u-boot-socfpga/master   Marek Vasut
      • [PULL] u-boot-socfpga/master   Tom Rini
      • [PULL] u-boot-socfpga/master   Marek Vasut
      • [PULL] u-boot-socfpga/master   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
  • [PULL] u-boot-usb/master   Tom Rini
• [PATCH 4/9] ARM: dts: stm32mp1: move FDCAN to PLL4_R   Marek Vasut
  • [PATCH 4/9] ARM: dts: stm32mp1: move FDCAN to PLL4_R   Patrick DELAUNAY
    • [PATCH 4/9] ARM: dts: stm32mp1: move FDCAN to PLL4_R   Marek Vasut
      • [PATCH 4/9] ARM: dts: stm32mp1: move FDCAN to PLL4_R   Patrick DELAUNAY
      • [PATCH 4/9] ARM: dts: stm32mp1: move FDCAN to PLL4_R   Marek Vasut
  • [PATCH 4/9] ARM: dts: stm32mp1: move FDCAN to PLL4_R   Patrick DELAUNAY
• [PATCH v2 1/2] riscv: Try to get cpu frequency from device tree   Sean Anderson
  • [PATCH v2 2/2] riscv: Enable cpu clock if it is present   Sean Anderson
    • [PATCH v2 2/2] riscv: Enable cpu clock if it is present   Bin Meng
  • [PATCH v2 1/2] riscv: Try to get cpu frequency from device tree   Bin Meng
• [PATCH] serial: Set baudrate on boot   Sean Anderson
  • [PATCH] serial: Set baudrate on boot   Simon Glass
    • [PATCH] serial: Set baudrate on boot   Sean Anderson
• [PATCH v3 00/12] riscv: Add Sipeed Maix support   Sean Anderson
  • [PATCH v3 01/12] clk: Always use the supplied struct clk   Sean Anderson
    • [PATCH v3 01/12] clk: Always use the supplied struct clk   Lukasz Majewski
      • [PATCH v3 01/12] clk: Always use the supplied struct clk   Rick Chen
  • [PATCH v3 02/12] clk: Check that ops of composite clock components, exist before calling   Sean Anderson
    • [PATCH v3 02/12] clk: Check that ops of composite clock components, exist before calling   Lukasz Majewski
  • [PATCH v3 03/12] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
    • [PATCH v3 03/12] clk: Unconditionally recursively en-/dis-able clocks   Lukasz Majewski
  • [PATCH v3 04/12] reset: Add generic reset driver   Sean Anderson
    • [PATCH v3 04/12] reset: Add generic reset driver   Simon Glass
      • [PATCH v3 04/12] reset: Add generic reset driver   Sean Anderson
    • [PATCH v3 04/12] reset: Add generic reset driver   Bin Meng
      • [PATCH v3 04/12] reset: Add generic reset driver   Sean Anderson
  • [PATCH v3 05/12] dm: Add support for simple-pm-bus   Sean Anderson
    • [PATCH v3 05/12] dm: Add support for simple-pm-bus   Simon Glass
      • [PATCH v3 05/12] dm: Add support for simple-pm-bus   Sean Anderson
      • [PATCH v3 05/12] dm: Add support for simple-pm-bus   Simon Glass
    • [PATCH v3 05/12] dm: Add support for simple-pm-bus   Bin Meng
  • [PATCH v3 06/12] riscv: Add headers for asm/global_data.h   Sean Anderson
    • [PATCH v3 06/12] riscv: Add headers for asm/global_data.h   Bin Meng
  • [PATCH v3 07/12] riscv: Add option to support RISC-V privileged spec 1.9.1   Sean Anderson
    • [PATCH v3 07/12] riscv: Add option to support RISC-V privileged spec 1.9.1   Bin Meng
      • [PATCH v3 07/12] riscv: Add option to support RISC-V privileged spec 1.9.1   Sean Anderson
      • [PATCH v3 07/12] riscv: Add option to support RISC-V privileged spec 1.9.1   Bin Meng
      • [PATCH v3 07/12] riscv: Add option to support RISC-V privileged spec 1.9.1   Sean Anderson
      • [PATCH v3 07/12] riscv: Add option to support RISC-V privileged spec 1.9.1   Bin Meng
      • [PATCH v3 07/12] riscv: Add option to support RISC-V privileged spec 1.9.1   Sean Anderson
  • [PATCH v3 08/12] riscv: Allow use of reset drivers   Sean Anderson
    • [PATCH v3 08/12] riscv: Allow use of reset drivers   Bin Meng
  • [PATCH v3 09/12] riscv: Add K210 pll support   Sean Anderson
  • [PATCH v3 10/12] riscv: Add K210 clock support   Sean Anderson
    • [PATCH v3 10/12] riscv: Add K210 clock support   Lukasz Majewski
  • [PATCH v3 11/12] riscv: Add device tree for K210   Sean Anderson
    • [PATCH v3 11/12] riscv: Add device tree for K210   Bin Meng
      • [PATCH v3 11/12] riscv: Add device tree for K210   Sean Anderson
      • [PATCH v3 11/12] riscv: Add device tree for K210   Bin Meng
  • [PATCH v3 12/12] riscv: Add initial Sipeed Maix support   Sean Anderson
    • [PATCH v3 12/12] riscv: Add initial Sipeed Maix support   Bin Meng
      • [PATCH v3 12/12] riscv: Add initial Sipeed Maix support   Sean Anderson
      • [PATCH v3 12/12] riscv: Add initial Sipeed Maix support   Bin Meng
      • [PATCH v3 12/12] riscv: Add initial Sipeed Maix support   Sean Anderson
• [PATCH] x86: Correct error return value in mrccache_get_region()   Simon Glass
  • [PATCH] x86: Correct error return value in mrccache_get_region()   Bin Meng
    • [PATCH] x86: Correct error return value in mrccache_get_region()   Bin Meng
• [PATCH 1/1 v1] cmd: gpio: Correct do_gpio() return value   Simon Glass
  • [PATCH 1/1 v1] cmd: gpio: Correct do_gpio() return value   Tom Rini
• [PATCH v2] dm: uclass: don't assign aliased seq numbers   Simon Glass
  • [PATCH v2] dm: uclass: don't assign aliased seq numbers   Michael Walle
    • [PATCH v2] dm: uclass: don't assign aliased seq numbers   Michal Simek
• [PATCH 02/21] dm: pci: Update the PCI read_config() method to const dev *   Tan, Ley Foon
  • [PATCH 02/21] dm: pci: Update the PCI read_config() method to const dev *   sjg at google.com
• [RFC] azure: Move to vs2017-win2016 platform build host   Bin Meng
  • [RFC] azure: Move to vs2017-win2016 platform build host   Bin Meng
  • [RFC] azure: Move to vs2017-win2016 platform build host   Bin Meng
    • [RFC] azure: Move to vs2017-win2016 platform build host   Bin Meng
• [PATCH v3 1/4] serial: ns16550: Support run-time configuration   Bin Meng
  • [PATCH v3 1/4] serial: ns16550: Support run-time configuration   Bin Meng
    • [PATCH v3 1/4] serial: ns16550: Support run-time configuration   Bin Meng
• [PATCH v3 2/4] x86: Update coreboot serial table struct   Bin Meng
• [PATCH v3 3/4] x86: serial: Add a coreboot serial driver   Bin Meng
• [PATCH v3 4/4] x86: Move coreboot over to use the coreboot UART   Bin Meng
• [PATCH 1/2] x86: serial: Use NS16550_DYNAMIC in Slim Bootloader   Bin Meng
  • [PATCH 1/2] x86: serial: Use NS16550_DYNAMIC in Slim Bootloader   Bin Meng
• [PATCH 2/2] doc: intel: Update serial driver changes in slimbootloader.rst   Bin Meng
  • [PATCH 2/2] doc: intel: Update serial driver changes in slimbootloader.rst   Bin Meng
• [PATCH] x86: use invd instead of wbinvd in real mode start code   Bin Meng
  • [PATCH] x86: use invd instead of wbinvd in real mode start code   Bin Meng
• [PATCH] x86: limit the fs segment to the pointer size   Bin Meng
  • [PATCH] x86: limit the fs segment to the pointer size   Bin Meng
• [PATCH 1/1] doc: Chromebook Coral: fix build warnings   Bin Meng
  • [PATCH 1/1] doc: Chromebook Coral: fix build warnings   Bin Meng
• [PATCH v1 1/2] x86: edison: Enable command line editing   Bin Meng
  • [PATCH v1 1/2] x86: edison: Enable command line editing   Bin Meng
• [PATCH v1 2/2] x86: edison: Switch to ACPI mode   Bin Meng
  • [PATCH v1 2/2] x86: edison: Switch to ACPI mode   Bin Meng
    • [PATCH v1 2/2] x86: edison: Switch to ACPI mode   Andy Shevchenko
  • [PATCH v1 2/2] x86: edison: Switch to ACPI mode   Bin Meng
• [PATCH 1/3] gpio: intel_gpio: Pass pinctrl device to pcr_clrsetbits32()   Bin Meng
  • Antwort: Re: [PATCH 1/3] gpio: intel_gpio: Pass pinctrl device to pcr_clrsetbits32()   Wolfgang Wallner
    • [PATCH 1/3] gpio: intel_gpio: Pass pinctrl device to pcr_clrsetbits32()   Bin Meng
• [PATCH 2/3] gpio: intel_gpio: Clear tx state bit when setting output   Bin Meng
• [PATCH 3/3] gpio: intel_gpio: Fix register/bit offsets intel_gpio_get_value()   Bin Meng
• [PATCH 1/2] configs: ls2080ardb: Make QSPI_MC_INIT access flash memory as per spi-mem   Kuldeep Singh
  • [PATCH 2/2] configs: ls2080ardb: Make BOOTCOMMAND access flash memory as per spi-mem   Kuldeep Singh
• [PATCH] ls1021a: Set CONFIG_SYS_BOOTMAPSZ to the memory for relocation   Alison Wang
  • [PATCH] ls1021a: Set CONFIG_SYS_BOOTMAPSZ to the memory for relocation   Tom Rini
• net: porting qe driver to DM   Heiko Schocher
  • net: porting qe driver to DM   Ran Wang
    • net: porting qe driver to DM   Qiang Zhao
      • net: porting qe driver to DM   Heiko Schocher
• [PATCH v2 1/4] clock_imx8mq: Delete not used init_usb_clk()   Jon Nettleton
  • [PATCH v2 1/4] clock_imx8mq: Delete not used init_usb_clk()   Lokesh Vutla
    • [PATCH v2 1/4] clock_imx8mq: Delete not used init_usb_clk()   Peng Fan
  • [PATCH v2 1/4] clock_imx8mq: Delete not used init_usb_clk()   Fabio Estevam
    • [PATCH v2 1/4] clock_imx8mq: Delete not used init_usb_clk()   Peng Fan
• [RFC PATCH] spi: ich: Drop while loop in hardware sequencing erase case   Bin Meng
• [PATCH 1/2] rk3399: Add boot flash script offet, size   Jagan Teki
  • [PATCH 2/2] rockchip: Add SF distro bootcmd   Jagan Teki
    • [PATCH 2/2] rockchip: Add SF distro bootcmd   Tom Rini
• [PATCH] ls1043a: Remove "fdt_high" environment variable   Wen He
  • [PATCH] ls1043a: Remove "fdt_high" environment variable   Tom Rini
    • [PATCH] ls1043a: Remove "fdt_high" environment variable   Priyanka Jain (OSS)
• [RFC PATCH 1/4] x86: apl: Add the term "Interrupt Timer Subsystem" to ITSS files   Bin Meng
  • [RFC PATCH 1/4] x86: apl: Add the term "Interrupt Timer Subsystem" to ITSS files   Bin Meng
• [RFC PATCH 2/4] x86: Move itss.h from Apollo Lake to the generic x86 include directory   Bin Meng
  • [RFC PATCH 2/4] x86: Move itss.h from Apollo Lake to the generic x86 include directory   Bin Meng
• [RFC PATCH 3/4] x86: Move itss.c from Apollo Lake to a more generic location   Bin Meng
  • [RFC PATCH 3/4] x86: Move itss.c from Apollo Lake to a more generic location   Bin Meng
    • Antwort: Re: [RFC PATCH 3/4] x86: Move itss.c from Apollo Lake to a more generic location   Wolfgang Wallner
      • [RFC PATCH 3/4] x86: Move itss.c from Apollo Lake to a more generic location   Bin Meng
• [RFC PATCH 4/4] x86: itss: Remove apl-prefix   Bin Meng
  • [RFC PATCH 4/4] x86: itss: Remove apl-prefix   Bin Meng
• [PATCH v3 0/3] Ethernet support for Raspberry Pi 4   LABBE Corentin
  • [PATCH v3 0/3] Ethernet support for Raspberry Pi 4   LABBE Corentin
  • [PATCH v3 0/3] Ethernet support for Raspberry Pi 4   Jaehoon Chung
    • [PATCH v3 0/3] Ethernet support for Raspberry Pi 4   Jaehoon Chung
      • [PATCH v3 0/3] Ethernet support for Raspberry Pi 4   LABBE Corentin
• [PATCH v2 0/3] gpio: intel_gpio: Fix Intel gpio driver   Wolfgang Wallner
  • [PATCH v2 1/3] gpio: intel_gpio: Pass pinctrl device to pcr_clrsetbits32()   Wolfgang Wallner
    • [PATCH v2 1/3] gpio: intel_gpio: Pass pinctrl device to pcr_clrsetbits32()   Bin Meng
      • [PATCH v2 1/3] gpio: intel_gpio: Pass pinctrl device to pcr_clrsetbits32()   Bin Meng
  • [PATCH v2 2/3] gpio: intel_gpio: Clear tx state bit when setting output   Wolfgang Wallner
    • [PATCH v2 2/3] gpio: intel_gpio: Clear tx state bit when setting output   Bin Meng
  • [PATCH v2 3/3] gpio: intel_gpio: Fix register/bit offsets intel_gpio_get_value()   Wolfgang Wallner
    • [PATCH v2 3/3] gpio: intel_gpio: Fix register/bit offsets intel_gpio_get_value()   Andy Shevchenko
      • [PATCH v2 3/3] gpio: intel_gpio: Fix register/bit offsets intel_gpio_get_value()   Bin Meng
    • [PATCH v2 3/3] gpio: intel_gpio: Fix register/bit offsets intel_gpio_get_value()   Bin Meng
  • [PATCH v2 0/3] gpio: intel_gpio: Fix Intel gpio driver   Andy Shevchenko
    • Antwort: Re: [PATCH v2 0/3] gpio: intel_gpio: Fix Intel gpio driver   Wolfgang Wallner
      • [PATCH v2 0/3] gpio: intel_gpio: Fix Intel gpio driver   Andy Shevchenko
      • [PATCH v2 0/3] gpio: intel_gpio: Fix Intel gpio driver   Bin Meng
      • [PATCH v2 0/3] gpio: intel_gpio: Fix Intel gpio driver   Andy Shevchenko
• [PATCH] Kconfig: update LOGLEVEL range   marek.bykowski at gmail.com
  • [PATCH] Kconfig: update LOGLEVEL range   Tom Rini
• [PATCH 1/2] rockchip: rk3399: split roc-rk3399-pc out of evb_rk3399   sunil at amarulasolutions.com
  • [PATCH 2/2] board: roc-rk3399-pc: Add support for onboard LED's and push button to indicate power mode   sunil at amarulasolutions.com
• [PATCH 0/5] x86: Improve support for chain-loading U-Boot   Bin Meng
  • [PATCH 0/5] x86: Improve support for chain-loading U-Boot   Andy Shevchenko
    • [PATCH 0/5] x86: Improve support for chain-loading U-Boot   Simon Glass
• [PATCH 1/5] x86: fsp: Allow skipping init code when chain loading   Bin Meng
  • [PATCH 1/5] x86: fsp: Allow skipping init code when chain loading   Simon Glass
    • [PATCH 1/5] x86: fsp: Allow skipping init code when chain loading   Bin Meng
      • [PATCH 1/5] x86: fsp: Allow skipping init code when chain loading   Simon Glass
      • [PATCH 1/5] x86: fsp: Allow skipping init code when chain loading   Bin Meng
      • [PATCH 1/5] x86: fsp: Allow skipping init code when chain loading   Simon Glass
• [PATCH 3/5] x86: cpu: Skip init code when chain loading   Bin Meng
  • [PATCH 3/5] x86: cpu: Skip init code when chain loading   Simon Glass
• [PATCH 4/5] dm: Avoid initing built-in devices when chain loading   Bin Meng
  • [PATCH 4/5] dm: Avoid initing built-in devices when chain loading   Simon Glass
• [PATCH 5/5] pci: Avoid auto-config when chain loading   Bin Meng
  • [PATCH 5/5] pci: Avoid auto-config when chain loading   Simon Glass
• [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI   Jagan Teki
  • [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI   Tom Rini
    • [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI   Anatolij Gustschin
• [PATCH 0/3] Enable octal read support for mt35xu* flashes   Kuldeep Singh
  • [PATCH 1/3] mtd: spi-nor: Enable SPI_NOR_OCTAL_READ flag for mt35xu*   Kuldeep Singh
  • [PATCH 2/3] arm: dts: ls1028a: Add RX, TX buswidth in qspi to use octal mode   Kuldeep Singh
  • [PATCH 3/3] arm: dts: lx2160a: Add RX, TX buswidth in qspi to use octal mode   Kuldeep Singh
• [PATCH] mx7ulp: Only enable LDO if it is not already enabled   Stefano Babic
  • [PATCH] mx7ulp: Only enable LDO if it is not already enabled   Fabio Estevam
• [PATCH v2 05/13] dm: irq: Add support for interrupt controller types   Bin Meng
• [PATCH v2 01/13] x86: Add a clock driver for Intel devices   Bin Meng
• [PATCH v2 02/13] x86: apl: Use the clock driver   Bin Meng
• [PATCH v2 03/13] x86: apl: Drop the I2C config in FSP-S   Bin Meng
• [PATCH v2 04/13] x86: coral: Update i2c and rtc status   Bin Meng
• [PATCH v2 1/2] mx7ulp: Remove duplicated definitions   Fabio Estevam
  • [PATCH v2 2/2] mx7ulp: Only enable LDO if it is not already enabled   Fabio Estevam
    • [PATCH v2 2/2] mx7ulp: Only enable LDO if it is not already enabled   Peng Fan
      • [PATCH v2 2/2] mx7ulp: Only enable LDO if it is not already enabled   Fabio Estevam
  • [PATCH v2 1/2] mx7ulp: Remove duplicated definitions   Peng Fan
• [PATCH v2 06/13] x86: Give each driver an IRQ type   Bin Meng
• [PATCH v2 07/13] x86: itss: Add of-platdata support   Bin Meng
• [PATCH] azure: Move to vs2017-win2016 platform build host   Tom Rini
  • [PATCH] azure: Move to vs2017-win2016 platform build host   Bin Meng
    • [PATCH] azure: Move to vs2017-win2016 platform build host   Bin Meng
• [PATCH 1/2] x86: itss: Add a Kconfig option to enable/disable ITSS driver   Wolfgang Wallner
  • [PATCH 2/2] x86: apl: Include ITSS driver   Wolfgang Wallner
    • [PATCH 2/2] x86: apl: Include ITSS driver   Simon Glass
    • [PATCH 2/2] x86: apl: Include ITSS driver   Bin Meng
      • [PATCH 2/2] x86: apl: Include ITSS driver   Bin Meng
  • [PATCH 1/2] x86: itss: Add a Kconfig option to enable/disable ITSS driver   Simon Glass
  • [PATCH 1/2] x86: itss: Add a Kconfig option to enable/disable ITSS driver   Bin Meng
  • [PATCH 1/2] x86: itss: Add a Kconfig option to enable/disable ITSS driver   Bin Meng
    • [PATCH 1/2] x86: itss: Add a Kconfig option to enable/disable ITSS driver   Bin Meng
• [PATCH v2 00/32] sandbox: Move to SDL2   Simon Glass
  • [PATCH v2 00/32] sandbox: Move to SDL2   Simon Glass
    • [PATCH v2 01/32] sandbox: Sort the help options   Simon Glass
    • [PATCH v2 02/32] video: Support truetype fonts on a 32-bit display   Simon Glass
    • [PATCH v2 03/32] video: sandbox: Enable all colour depths   Simon Glass
    • [PATCH v2 04/32] mailbox: Rename free() to rfree()   Simon Glass
    • [PATCH v2 05/32] power-domain: Rename free() to rfree()   Simon Glass
    • [PATCH v2 06/32] reset: Rename free() to rfree()   Simon Glass
    • [PATCH v2 07/32] gpio: Rename free() to rfree()   Simon Glass
    • [PATCH v2 08/32] clk: Rename free() to rfree()   Simon Glass
    • [PATCH v2 09/32] dma: Rename free() to rfree()   Simon Glass
    • [PATCH v2 10/32] mtd: Rename free() to rfree()   Simon Glass
    • [PATCH v2 11/32] sandbox: Rename 'free' variable   Simon Glass
    • [PATCH v2 12/32] sandbox: Use a prefix for all allocation functions   Simon Glass
    • [PATCH v2 13/32] exports: Add the malloc.h header   Simon Glass
    • [PATCH v2 14/32] string: Allow arch override of strndup() also   Simon Glass
    • [PATCH v2 15/32] sandbox: Rename strdup() functions   Simon Glass
    • [PATCH v2 16/32] sandbox: Drop use of special os_malloc() where possible   Simon Glass
    • [PATCH v2 17/32] sandbox: Drop os_realloc()   Simon Glass
    • [PATCH v2 18/32] sandbox: Ensure that long-options array is terminated   Simon Glass
    • [PATCH v2 19/32] sandbox: Add a new header for the system malloc()   Simon Glass
    • [PATCH v2 20/32] sound: Add a new stop_play() method   Simon Glass
    • [PATCH v2 21/32] sandbox: sound: Handle errors better in sound_beep()   Simon Glass
    • [PATCH v2 22/32] sandbox: Add comments to the sdl struct   Simon Glass
    • [PATCH v2 23/32] sandbox: sdl: Improve error handling   Simon Glass
    • [PATCH v2 24/32] sandbox: sdl: Support waiting for audio to complete   Simon Glass
    • [PATCH v2 25/32] gitlab: Disable SDL when building sandbox   Simon Glass
      • [PATCH v2 25/32] gitlab: Disable SDL when building sandbox   sjg at google.com
    • [PATCH v2 26/32] sandbox: sdl: Move to use SDL2   Simon Glass
      • [PATCH v2 26/32] sandbox: sdl: Move to use SDL2   sjg at google.com
    • [PATCH v2 27/32] sandbox: sdl: Add an option to double the screen size   Simon Glass
      • [PATCH v2 27/32] sandbox: sdl: Add an option to double the screen size   sjg at google.com
    • [PATCH v2 28/32] sandbox: Support changing the LCD colour depth   Simon Glass
      • [PATCH v2 28/32] sandbox: Support changing the LCD colour depth   sjg at google.com
    • [PATCH v2 29/32] dm: core: Require users of devres to include the header   Simon Glass
      • [PATCH v2 29/32] dm: core: Require users of devres to include the header   sjg at google.com
    • [PATCH v2 30/32] dm: core: Create a new header file for 'compat' features   Simon Glass
      • [PATCH v2 30/32] dm: core: Create a new header file for 'compat' features   sjg at google.com
    • [PATCH v2 31/32] dm: core: Drop the inclusion of linux/compat.h in dm.h   Simon Glass
      • [PATCH v2 31/32] dm: core: Drop the inclusion of linux/compat.h in dm.h   sjg at google.com
    • [PATCH v2 32/32] sandbox: Complete migration away from os_malloc()   Simon Glass
      • [PATCH v2 32/32] sandbox: Complete migration away from os_malloc()   sjg at google.com
• [PATCH 0/2] arm: k3-j721e: Fix uart boot   Lokesh Vutla
  • [PATCH 1/2] arm: dts: k3-j721e-r5-common-proc-board: Disable power-domains for mcu uart   Lokesh Vutla
  • [PATCH 2/2] configs: j721e_evm_r5: Enable early cons   Lokesh Vutla
• [PATCH v2 1/2] rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399   sunil at amarulasolutions.com
  • [PATCH v2 2/2] board: roc-pc-rk3399: Add support for onboard LED's and push button to indicate power mode   sunil at amarulasolutions.com
    • [PATCH v2 2/2] board: roc-pc-rk3399: Add support for onboard LED's and push button to indicate power mode   Kever Yang
  • [PATCH v2 1/2] rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399   Kever Yang
• [PATCH v2] imx: support for conga-QMX8 board   Oliver Graute
  • [RFC 1/2] hack to boot with 2020.01   Oliver Graute
    • [RFC 1/2] hack to boot with 2020.01   Simon Glass
    • [RFC 1/2] hack to boot with 2020.01   Tom Rini
      • [RFC 1/2] hack to boot with 2020.01   Oliver Graute
  • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Oliver Graute
    • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Neil Armstrong
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Lokesh Vutla
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Oliver Graute
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Lokesh Vutla
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Oliver Graute
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Anatolij Gustschin
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Anatolij Gustschin
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Lokesh Vutla
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Oliver Graute
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Neil Armstrong
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Anatolij Gustschin
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Anatolij Gustschin
      • [RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"   Lokesh Vutla
• [PATCH] board: stih410-b2260: remove fdt_high and initrd_high   Patrice Chotard
  • [PATCH] board: stih410-b2260: remove fdt_high and initrd_high   Tom Rini
  • [PATCH] board: stih410-b2260: remove fdt_high and initrd_high   Patrick DELAUNAY
  • [PATCH] board: stih410-b2260: remove fdt_high and initrd_high   Patrick DELAUNAY
• [PATCH v1 0/2] Update board environment for STM32 MCU's boards   Patrice Chotard
  • [PATCH v1 2/2] board: stm32: remove fdt_high and fdt_highinitrd_high   Patrice Chotard
    • [PATCH v1 2/2] board: stm32: remove fdt_high and fdt_highinitrd_high   Patrick DELAUNAY
    • [PATCH v1 2/2] board: stm32: remove fdt_high and fdt_highinitrd_high   Patrick DELAUNAY
• [PATCH v1 1/2] board: stm32: fix extra env setings addresses   Patrice Chotard
  • [PATCH v1 1/2] board: stm32: fix extra env setings addresses   Patrick DELAUNAY
  • [PATCH v1 1/2] board: stm32: fix extra env setings addresses   Patrick DELAUNAY
• [PATCH v4 1/2] Kconfig: add btrfs to distro boot   Petr Vorel
• [PATCH 1/3] watchdog: omap_wdt: Fix WDT timeout configuration   Lokesh Vutla
  • [PATCH 1/3] watchdog: omap_wdt: Fix WDT timeout configuration   Lokesh Vutla
• [PATCH 2/3] watchdog: omap_wdt: Fix WDT reloading   Lokesh Vutla
• [PATCH 3/3] watchdog: omap_wdt: Fix WDT coding style   Lokesh Vutla
• [PATCH v1] imx: set CONFIG_FEC_MXC_PHYADDR to -1   Fabio Estevam
  • [PATCH v1] imx: set CONFIG_FEC_MXC_PHYADDR to -1   Oliver Graute
  • [PATCH v1] imx: set CONFIG_FEC_MXC_PHYADDR to -1   Fabio Estevam
    • [PATCH v1] imx: set CONFIG_FEC_MXC_PHYADDR to -1   Oliver Graute
      • [PATCH v1] imx: set CONFIG_FEC_MXC_PHYADDR to -1   Fabio Estevam
• [PATCHv5 0/5]Odroid n2 using eMMC would fail to boot up   Anand Moon
  • [PATCHv5 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Anand Moon
    • [PATCHv5 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Jerome Brunet
      • [PATCHv5 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Anand Moon
      • [PATCHv5 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Jerome Brunet
      • [PATCHv5 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Anand Moon
  • [PATCHv5 2/5] mmc: meson-gx: Use proper compatible string as per the dts   Anand Moon
  • [PATCHv5 3/5] arm: dts: gx: Move common nodes to the -u-boot.dtsi   Anand Moon
  • [PATCHv5 4/5] arm: dts: g12: Move common nodes to the -u-boot.dtsi   Anand Moon
  • [PATCHv5 5/5] arm: dts: s400: Move common nodes to the -u-boot.dtsi   Anand Moon
• U-Boot Logo showing incorrect colors with eLCDIF   Fabio Estevam
  • U-Boot Logo showing incorrect colors with eLCDIF   Anatolij Gustschin
    • U-Boot Logo showing incorrect colors with eLCDIF   Fabio Estevam
      • U-Boot Logo showing incorrect colors with eLCDIF   Fabio Estevam
      • U-Boot Logo showing incorrect colors with eLCDIF   Anatolij Gustschin
• [gitlab-ci-runner PATCH] Dockerfile: Add libsdl2-dev   Simon Glass
  • [gitlab-ci-runner PATCH] Dockerfile: Add libsdl2-dev   Bin Meng
  • [gitlab-ci-runner PATCH] Dockerfile: Add libsdl2-dev   Tom Rini
• [PATCH 1/2] mx6ul_evk: Move CONFIG_FEC_MXC to defconfig   Fabio Estevam
  • [PATCH 2/2] mx6ul_evk: Remove FEC related board code   Fabio Estevam
    • [PATCH 2/2] mx6ul_evk: Remove FEC related board code   Peng Fan
  • [PATCH 1/2] mx6ul_evk: Move CONFIG_FEC_MXC to defconfig   Peng Fan
• [PATCH] serial: ns16550: Correct NS16550_DYNAMIC for non-x86   Simon Glass
  • [PATCH] serial: ns16550: Correct NS16550_DYNAMIC for non-x86   Bin Meng
    • [PATCH] serial: ns16550: Correct NS16550_DYNAMIC for non-x86   Simon Glass
      • [PATCH] serial: ns16550: Correct NS16550_DYNAMIC for non-x86   Bin Meng
• [PATCH v2 08/13] dm: irq: Add support for requesting interrupts   Bin Meng
  • [PATCH v2 08/13] dm: irq: Add support for requesting interrupts   Simon Glass
    • [PATCH v2 08/13] dm: irq: Add support for requesting interrupts   Bin Meng
• [PATCH v3] dm: uclass: don't assign aliased seq numbers   Michael Walle
  • [PATCH v3] dm: uclass: don't assign aliased seq numbers   Simon Glass
  • [PATCH v3] dm: uclass: don't assign aliased seq numbers   Michal Simek
    • [PATCH v3] dm: uclass: don't assign aliased seq numbers   Michael Walle
      • [PATCH v3] dm: uclass: don't assign aliased seq numbers   Michal Simek
      • [PATCH v3] dm: uclass: don't assign aliased seq numbers   Michael Walle
      • [PATCH v3] dm: uclass: don't assign aliased seq numbers   Michal Simek
• [PATCH] mx6ullevk: Enable Ethernet support   Fabio Estevam
  • [PATCH] mx6ullevk: Enable Ethernet support   Peng Fan
• [PATCH] mx6ulz_14x14_evk: Disable CONFIG_NET   Fabio Estevam
• [RFC PATCH 00/10] arm: add support for SoC S5P4418   Stefan Bosch
  • [RFC PATCH 01/10] arm: add mach-nexell (header files)   Stefan Bosch
  • [RFC PATCH 02/10] arm: add mach-nexell (all files except header files)   Stefan Bosch
  • [RFC PATCH 03/10] i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)   Stefan Bosch
    • [RFC PATCH 03/10] i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)   Heiko Schocher
      • [RFC PATCH 03/10] i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)   Stefan B.
      • [RFC PATCH 03/10] i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)   Stefan B.
      • [RFC PATCH 03/10] i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)   Heiko Schocher
  • [RFC PATCH 04/10] video: add nexell video driver (soc: displaytop)   Stefan Bosch
  • [RFC PATCH 05/10] video: add nexell video driver (soc: mlc, mipi)   Stefan Bosch
  • [RFC PATCH 06/10] video: add nexell video driver (soc: lvds, hdmi)   Stefan Bosch
  • [RFC PATCH 07/10] video: add nexell video driver (soc: dpc, makefile)   Stefan Bosch
  • [RFC PATCH 08/10] video: add nexell video driver (display/video driver)   Stefan Bosch
  • [RFC PATCH 09/10] arm: add support for SoC s5p4418 (cpu) / nanopi2 board   Stefan Bosch
    • [RFC PATCH 09/10] arm: add support for SoC s5p4418 (cpu) / nanopi2 board   Tom Rini
  • [RFC PATCH 10/10] arm: add (default) config for nanopi2 board   Stefan Bosch
  • [RFC PATCH 00/10] arm: add support for SoC S5P4418   Tom Rini
  • [RFC PATCH 00/10] arm: add support for SoC S5P4418   Amit Tomer
    • [RFC PATCH 00/10] arm: add support for SoC S5P4418   Stefan B.
• [PATCH v2] cmd: Add command to dump drivers and compatible strings   Sean Anderson
  • [PATCH v2] cmd: Add command to dump drivers and compatible strings   Bin Meng
  • [PATCH v2] cmd: Add command to dump drivers and compatible strings   Simon Glass
• [PATCH] video: add opt out option for VIDEO_BBP selection   Anatolij Gustschin
  • [PATCH] video: add opt out option for VIDEO_BBP selection   Tom Rini
    • [PATCH] video: add opt out option for VIDEO_BBP selection   Anatolij Gustschin
      • [PATCH] video: add opt out option for VIDEO_BBP selection   Tom Rini
• [U-Boot] [PATCH] fit: Do not automatically decompress ramdisk images   Rasmus Villemoes
• [PATCH v2 00/17] x86: coral: Add support for Cr50   Simon Glass
  • [PATCH v2 01/17] dm: core: Allow iterating devices without uclass_get()   Simon Glass
    • [PATCH v2 01/17] dm: core: Allow iterating devices without uclass_get()   Bin Meng
  • [PATCH v2 02/17] dm: core: Add a function to find a device by drvdata   Simon Glass
    • [PATCH v2 02/17] dm: core: Add a function to find a device by drvdata   Bin Meng
  • [PATCH v2 03/17] dm: core: Change syscon to use helper function   Simon Glass
    • [PATCH v2 03/17] dm: core: Change syscon to use helper function   Bin Meng
  • [PATCH v2 04/17] tegra: i2c: Change driver to use helper function   Simon Glass
    • [PATCH v2 04/17] tegra: i2c: Change driver to use helper function   Heiko Schocher
    • [PATCH v2 04/17] tegra: i2c: Change driver to use helper function   Bin Meng
  • [PATCH v2 05/17] x86: Add a clock driver for Intel devices   Simon Glass
    • [PATCH v2 05/17] x86: Add a clock driver for Intel devices   Bin Meng
  • [PATCH v2 06/17] x86: apl: Use the clock driver   Simon Glass
  • [PATCH v2 07/17] x86: apl: Drop the I2C config in FSP-S   Simon Glass
    • [PATCH v2 07/17] x86: apl: Drop the I2C config in FSP-S   Bin Meng
  • [PATCH v2 08/17] x86: coral: Update i2c and rtc status   Simon Glass
    • [PATCH v2 08/17] x86: coral: Update i2c and rtc status   Bin Meng
  • [PATCH v2 09/17] dm: irq: Add support for interrupt controller types   Simon Glass
    • [PATCH v2 09/17] dm: irq: Add support for interrupt controller types   Bin Meng
  • [PATCH v2 10/17] x86: Give each driver an IRQ type   Simon Glass
    • [PATCH v2 10/17] x86: Give each driver an IRQ type   Bin Meng
  • [PATCH v2 11/17] x86: itss: Add of-platdata support   Simon Glass
    • [PATCH v2 11/17] x86: itss: Add of-platdata support   Bin Meng
  • [PATCH v2 12/17] dm: irq: Add support for requesting interrupts   Simon Glass
    • [PATCH v2 12/17] dm: irq: Add support for requesting interrupts   Bin Meng
  • [PATCH v2 13/17] x86: Add support for ACPI general-purpose events   Simon Glass
    • [PATCH v2 13/17] x86: Add support for ACPI general-purpose events   Bin Meng
      • [PATCH v2 13/17] x86: Add support for ACPI general-purpose events   Simon Glass
  • [PATCH v2 14/17] x86: coral: Add I2C and TPM device-tree definitions   Simon Glass
    • [PATCH v2 14/17] x86: coral: Add I2C and TPM device-tree definitions   Bin Meng
  • [PATCH v2 15/17] tpm: Add more TPM2 definitions   Simon Glass
    • [PATCH v2 15/17] tpm: Add more TPM2 definitions   Bin Meng
  • [PATCH v2 16/17] tpm: Add a driver for H1/Cr50   Simon Glass
    • [PATCH v2 16/17] tpm: Add a driver for H1/Cr50   Bin Meng
  • [PATCH v2 17/17] x86: coral: Enable TPM   Simon Glass
    • [PATCH v2 17/17] x86: coral: Enable TPM   Bin Meng
• [PATCH 0/2] x86: serial: Use NS16550_DYNAMIC in Slim Bootloader   Bin Meng
  • [PATCH 0/2] x86: serial: Use NS16550_DYNAMIC in Slim Bootloader   Park, Aiden
• [PATCH 0/9] TI: AM654/J721e: Add support to boot from OSPI   Lokesh Vutla
• [GIT PULL] TI changes for v2020.04-rc2   Lokesh Vutla
  • [GIT PULL] TI changes for v2020.04-rc2   Tom Rini
• [PATCH v4 00/10] am57xx: Implement Android 10 boot flow   Lokesh Vutla
• [PATCH] gpio: pca953x_gpio: Add support for 24 bit IO expander   Lokesh Vutla
• [PATCH 0/4] J721e: Add I2C nodes   Lokesh Vutla
• [PATCH 0/7] J721e: Add support for DFU boot mode   Lokesh Vutla
• [PATCH v2 00/12] TI: AM654/J721e: Add support to boot from OSPI   Vignesh Raghavendra
  • [PATCH v2 01/12] drivers: Descend to drivers/soc unconditionally   Vignesh Raghavendra
  • [PATCH v2 02/12] ARM: mach-k3: arm64-mmu: map 64bit FSS MMIO space in A53 MMU   Vignesh Raghavendra
  • [PATCH v2 03/12] ARM: mach-k3: sysfw-loader: Use SPI memmapped addr when loading SYSFW   Vignesh Raghavendra
  • [PATCH v2 04/12] ARM: dts: k3-am65: Add OSPI DT nodes   Vignesh Raghavendra
  • [PATCH v2 05/12] ARM: dts: k3-j721e: Add OSPI DT nodes   Vignesh Raghavendra
  • [PATCH v2 06/12] configs: am65x_evm: Setup mtdparts for OSPI   Vignesh Raghavendra
  • [PATCH v2 07/12] configs: j721e_evm: Setup mtdparts for OSPI   Vignesh Raghavendra
  • [PATCH v2 08/12] configs: j721e_evm_defconfig: Enable OSPI configs   Vignesh Raghavendra
  • [PATCH v2 09/12] configs: am65x_evm_defconfig: Enable OSPI configs   Vignesh Raghavendra
  • [PATCH v2 10/12] board: ti: Update AM65x and J721e READMEs for OSPI boot   Vignesh Raghavendra
  • [PATCH v2 11/12] configs: ama65x_hs_evm: Enable OSPI related configs   Vignesh Raghavendra
  • [PATCH v2 12/12] configs: j721e_hs_evm: Enable OSPI related configs   Vignesh Raghavendra
  • [PATCH v2 00/12] TI: AM654/J721e: Add support to boot from OSPI   Andreas Dannenberg
  • [PATCH v2 00/12] TI: AM654/J721e: Add support to boot from OSPI   Lokesh Vutla
• [PATCH v5 02/10] lib: elf: Move the generic elf loading/validating functions to lib   Keerthy
• [PATCH] configs: lx2160a: Define ENV_ADDR value   Kuldeep Singh
• [PATCH v7 00/10] Add support for loading main_r5fss0_core0   Keerthy
  • [PATCH v7 01/10] env: nowhere: set default enviroment   Keerthy
  • [PATCH v7 02/10] lib: elf: Move the generic elf loading/validating functions to lib   Keerthy
    • [PATCH v7 02/10] lib: elf: Move the generic elf loading/validating functions to lib   Tom Rini
  • [PATCH v7 03/10] arm: k3: Add support for loading non linux remote cores   Keerthy
  • [PATCH v7 04/10] armv7R: K3: r5_mpu: Enable execute permission for MCU0 BTCM   Keerthy
  • [PATCH v7 05/10] armv7R: K3: Add support for jumping to firmware   Keerthy
  • [PATCH v7 06/10] arm: dts: k3-j721e-r5-u-boot: Add fs_loader node   Keerthy
  • [PATCH v7 07/10] arm: dts: k3-j721e-r5: Enable r5fss0 cluster in SPL   Keerthy
  • [PATCH v7 08/10] include: configs: j721e_evm: Add env variables for mcu_r5fss0_core0 & main_r5fss0_core0   Keerthy
  • [PATCH v7 09/10] configs: j721e_evm_r5: Enable R5F remoteproc support   Keerthy
  • [PATCH v7 10/10] configs: j721e_evm_r5_defconfig: Remove saving ENV in eMMC   Keerthy
  • [PATCH v7 00/10] Add support for loading main_r5fss0_core0   Lokesh Vutla
    • [PATCH v7 00/10] Add support for loading main_r5fss0_core0   keerthy
• [PATCH] configs: lx2160a: Define ENV_SECT_SIZE   Kuldeep Singh
• [PATCH v2 04/10] mmc: sdhci: Expose sdhci_init() as non-static   Faiz Abbas
  • [PATCH v2 04/10] mmc: sdhci: Expose sdhci_init() as non-static   Peng Fan
    • [PATCH v2 04/10] mmc: sdhci: Expose sdhci_init() as non-static   Faiz Abbas
      • [PATCH v2 04/10] mmc: sdhci: Expose sdhci_init() as non-static   Jaehoon Chung
      • [PATCH v2 04/10] mmc: sdhci: Expose sdhci_init() as non-static   Faiz Abbas
      • [PATCH v2 04/10] mmc: sdhci: Expose sdhci_init() as non-static   Jaehoon Chung
      • [PATCH v2 04/10] mmc: sdhci: Expose sdhci_init() as non-static   Jaehoon Chung
      • [PATCH v2 04/10] mmc: sdhci: Expose sdhci_init() as non-static   Faiz Abbas
      • [PATCH v2 04/10] mmc: sdhci: Expose sdhci_init() as non-static   Jaehoon Chung
• Please pull u-boot-x86   Bin Meng
  • Please pull u-boot-x86   Tom Rini
  • Please pull u-boot-x86   Bin Meng
    • Please pull u-boot-x86   Tom Rini
      • Please pull u-boot-x86   Anatolij Gustschin
      • Please pull u-boot-x86   Tom Rini
• [EXT] Re: [Patch v4 0/7] Transition of fsl qspi driver to spi-mem framework   Kuldeep Singh
  • [EXT] Re: [Patch v4 0/7] Transition of fsl qspi driver to spi-mem framework   Kuldeep Singh
• [U-Boot] [PATCH v2 03/10] tiny-printf: Reorder code to support %p   Vignesh Raghavendra
  • [U-Boot] [PATCH v2 03/10] tiny-printf: Reorder code to support %p   Simon Glass
• [PATCH v3 3/4] arm64: dts: sync Allwinner H6 files   Andre Heider
  • [PATCH v3 3/4] arm64: dts: sync Allwinner H6 files   Andre Heider
• [PATCH] x86: Move P2SB from Apollo Lake to a more generic location   Wolfgang Wallner
  • [PATCH] x86: Move P2SB from Apollo Lake to a more generic location   Bin Meng
    • [PATCH] x86: Move P2SB from Apollo Lake to a more generic location   Bin Meng
• [PATCH v4 0/4] arm64: sun50i: Add support for Orange Pi 3   Andre Heider
  • [PATCH v4 1/4] sunxi: board: extract creating a unique sid into a helper function   Andre Heider
  • [PATCH v4 2/4] arm: sunxi: add a config option to fixup a Bluetooth address   Andre Heider
  • [PATCH v4 3/4] arm64: dts: sync Allwinner H6 files   Andre Heider
  • [PATCH v4 4/4] arm64: dts: sun50i: Add support for Orange Pi 3   Andre Heider
• [PATCH 4/4] configs: lx2160a: Enable FSPI support   Priyanka Jain
• [PATCH v2] cli: Make the sandbox board_run_command the default   Bin Meng
  • [PATCH v2] cli: Make the sandbox board_run_command the default   sjg at google.com
• [PATCH v2] cmd: Ensure sf operates on spi flash   Bin Meng
  • [PATCH v2] cmd: Ensure sf operates on spi flash   Sean Anderson
• [PATCH 0/9] mmc: sdhci: code clean-up and fix cache coherency problem.   Masahiro Yamada
  • [PATCH 2/9] dma-mapping: fix the prototype of dma_unmap_single()   Masahiro Yamada
    • [PATCH 2/9] dma-mapping: fix the prototype of dma_unmap_single()   Simon Glass
      • [PATCH 2/9] dma-mapping: fix the prototype of dma_unmap_single()   Masahiro Yamada
    • [PATCH 2/9] dma-mapping: fix the prototype of dma_unmap_single()   Rick Chen
  • [PATCH 0/9] mmc: sdhci: code clean-up and fix cache coherency problem.   Peng Fan
    • [PATCH 0/9] mmc: sdhci: code clean-up and fix cache coherency problem.   Masahiro Yamada
• [PATCH 1/9] dma-mapping: fix the prototype of dma_map_single()   Masahiro Yamada
  • [PATCH 1/9] dma-mapping: fix the prototype of dma_map_single()   Simon Glass
    • [PATCH 1/9] dma-mapping: fix the prototype of dma_map_single()   Masahiro Yamada
      • [PATCH 1/9] dma-mapping: fix the prototype of dma_map_single()   Simon Glass
  • [PATCH 1/9] dma-mapping: fix the prototype of dma_map_single()   Rick Chen
• [PATCH 3/9] mmc: sdhci: put the aligned buffer pointer to struct sdhci_host   Masahiro Yamada
• [PATCH 4/9] mmc: sdhci: reduce code duplication for aligned buffer   Masahiro Yamada
• [PATCH 5/9] mmc: sdhci: use lower_32_bit2() and upper_32_bits() for setting adma_addr   Masahiro Yamada
• [PATCH 6/9] mmc: sdhci: remove unneeded casts   Masahiro Yamada
• [PATCH 7/9] mmc: add mmc_get_dma_dir() helper   Masahiro Yamada
• [PATCH 8/9] mmc: sdhci: use dma_map_single() instead of flush_cache() before DMA   Masahiro Yamada
• [PATCH 9/9] mmc: sdhci: fix missing cache invalidation after reading by DMA   Masahiro Yamada
• [PATCH] ARM: uniphier: enable CONFIG_MMC_SDHCI_ADMA for uniphier_v8_defconfig   Masahiro Yamada
  • [PATCH] ARM: uniphier: enable CONFIG_MMC_SDHCI_ADMA for uniphier_v8_defconfig   Masahiro Yamada
• [U-Boot Patch v2 0/4] Fix currently available support for flash on HiFive Unleashed   Bin Meng
  • [U-Boot Patch v2 0/4] Fix currently available support for flash on HiFive Unleashed   Sagar Kadam
• [U-Boot Patch v2 1/4] fu540: dtsi: spi: add num-cs info to device tree   Bin Meng
  • [U-Boot Patch v2 1/4] fu540: dtsi: spi: add num-cs info to device tree   Sagar Kadam
    • [U-Boot Patch v2 1/4] fu540: dtsi: spi: add num-cs info to device tree   Bin Meng
• [U-Boot Patch v2 2/4] spi: fu540: add claim and release method to spi-sifive.c   Bin Meng
  • [U-Boot Patch v2 2/4] spi: fu540: add claim and release method to spi-sifive.c   Sagar Kadam
    • [U-Boot Patch v2 2/4] spi: fu540: add claim and release method to spi-sifive.c   Bin Meng
• [U-Boot Patch v2 3/4] dts: u-boot.dtsi: override flash tx-rx width   Bin Meng
  • [U-Boot Patch v2 3/4] dts: u-boot.dtsi: override flash tx-rx width   Sagar Kadam
    • [U-Boot Patch v2 3/4] dts: u-boot.dtsi: override flash tx-rx width   Bin Meng
      • [U-Boot Patch v2 3/4] dts: u-boot.dtsi: override flash tx-rx width   Sagar Kadam
• [U-Boot Patch v2 4/4] bdinfo: fu540: print fdt base address for debugging   Bin Meng
  • [U-Boot Patch v2 4/4] bdinfo: fu540: print fdt base address for debugging   Sagar Kadam
• [RFC] mx6cuboxi: Enable OF_CONTROL and DM in SPL   Baruch Siach
  • [RFC] mx6cuboxi: Enable OF_CONTROL and DM in SPL   Walter Lozano
• [PATCH] riscv: Try to get cpu frequency from device tree   Sean Anderson
  • [PATCH] riscv: Try to get cpu frequency from device tree   Bin Meng
    • [PATCH] riscv: Try to get cpu frequency from device tree   Sean Anderson
• [PATCH 1/1] doc: fix AX25-AE350 RISC-V documentation   Bin Meng
  • [PATCH 1/1] doc: fix AX25-AE350 RISC-V documentation   Heinrich Schuchardt
    • [PATCH 1/1] doc: fix AX25-AE350 RISC-V documentation   Bin Meng
    • [PATCH 1/1] doc: fix AX25-AE350 RISC-V documentation   Rick Chen
• [PATCH] doc: fix opensbi build steps for AX25-AE350   Bin Meng
• [PATCH v3 05/10] riscv: sifive: fu540: add DDR4 info   Bin Meng
• [U-Boot] [PATCH] qemu-riscv64_smode, sifive-fu540: fix extlinux (define preboot)   Bin Meng
• [U-Boot] [PATCH] board: ax25-ae350: Print board information.   Bin Meng
  • [U-Boot] [PATCH] board: ax25-ae350: Print board information.   Rick Chen
    • [U-Boot] [PATCH] board: ax25-ae350: Print board information.   Bin Meng
• [PATCH v3] riscv: add Kconfig entries for the F and D ISA extensions support   Bin Meng
  • [PATCH v3] riscv: add Kconfig entries for the F and D ISA extensions support   Eric Lin
  • [PATCH v3] riscv: add Kconfig entries for the F and D ISA extensions support   Bin Meng
• [PATCH] mx6cuboxi: don't disable fdt relocation   Baruch Siach
  • [PATCH] mx6cuboxi: don't disable fdt relocation   Fabio Estevam
    • [PATCH] mx6cuboxi: don't disable fdt relocation   Tom Rini
• [PATCH] tpm2: ftpm: A driver for firmware TPM running inside TEE   Thirupathaiah Annapureddy
  • [PATCH] tpm2: ftpm: A driver for firmware TPM running inside TEE   Simon Glass
    • [PATCH] tpm2: ftpm: A driver for firmware TPM running inside TEE   sjg at google.com
• [PATCH] image: fdt: check "status" of "/reserved-memory" subnodes   Thirupathaiah Annapureddy
  • [PATCH] image: fdt: check "status" of "/reserved-memory" subnodes   Simon Glass
    • [PATCH] image: fdt: check "status" of "/reserved-memory" subnodes   Simon Glass
• [PATCH v1 1/5] colibri_vf: enable relocation of fdt and initrd   Igor Opaniuk
  • [PATCH v1 2/5] colibri_imx7: enable relocation of fdt and initrd   Igor Opaniuk
    • [PATCH v1 2/5] colibri_imx7: enable relocation of fdt and initrd   Oleksandr Suvorov
  • [PATCH v1 3/5] apalis_imx6: enable relocation of fdt and initrd   Igor Opaniuk
    • [PATCH v1 3/5] apalis_imx6: enable relocation of fdt and initrd   Oleksandr Suvorov
  • [PATCH v1 4/5] colibri-imx6ull: enable relocation of fdt and initrd   Igor Opaniuk
    • [PATCH v1 4/5] colibri-imx6ull: enable relocation of fdt and initrd   Oleksandr Suvorov
  • [PATCH v1 5/5] colibri_imx6: enable relocation of fdt and initrd   Igor Opaniuk
    • [PATCH v1 5/5] colibri_imx6: enable relocation of fdt and initrd   Oleksandr Suvorov
    • [PATCH v1 5/5] colibri_imx6: enable relocation of fdt and initrd   Oleksandr Suvorov
  • [PATCH v1 1/5] colibri_vf: enable relocation of fdt and initrd   Oleksandr Suvorov
• [PATCH] video: enable VIDEO_ANSI and all VIDEO_BBP options   Anatolij Gustschin
  • [PATCH] video: enable VIDEO_ANSI and all VIDEO_BBP options   Tom Rini
• [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
  • [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Tom Rini
    • [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   David Abdurachmanov
      • [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Tom Rini
      • [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
      • [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Tom Rini
      • [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   David Abdurachmanov
      • [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
      • [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
• [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Rasmus Villemoes
  • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Simon Glass
    • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Rasmus Villemoes
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Simon Glass
  • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Wolfgang Denk
    • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Rasmus Villemoes
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Rasmus Villemoes
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Wolfgang Denk
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Wolfgang Denk
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Rasmus Villemoes
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Wolfgang Denk
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Rasmus Villemoes
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Rasmus Villemoes
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Martin Hundebøll
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Wolfgang Denk
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Wolfgang Denk
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Wolfgang Denk
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Rasmus Villemoes
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Rasmus Villemoes
      • [PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"   Tom Rini
• [PATCH v3 00/17] x86: coral: Add support for Cr50   Simon Glass
  • [PATCH v3 01/17] dm: core: Allow iterating devices without uclass_get()   Simon Glass
  • [PATCH v3 02/17] dm: core: Add a function to find a device by drvdata   Simon Glass
  • [PATCH v3 03/17] dm: core: Change syscon to use helper function   Simon Glass
  • [PATCH v3 04/17] tegra: i2c: Change driver to use helper function   Simon Glass
    • [PATCH v3 04/17] tegra: i2c: Change driver to use helper function   Stephen Warren
  • [PATCH v3 05/17] x86: Add a clock driver for Intel devices   Simon Glass
  • [PATCH v3 06/17] x86: apl: Use the clock driver   Simon Glass
  • [PATCH v3 07/17] x86: apl: Drop the I2C config in FSP-S   Simon Glass
  • [PATCH v3 08/17] x86: coral: Update i2c and rtc status   Simon Glass
  • [PATCH v3 09/17] dm: irq: Add support for interrupt controller types   Simon Glass
  • [PATCH v3 10/17] x86: Give each driver an IRQ type   Simon Glass
  • [PATCH v3 11/17] x86: itss: Add of-platdata support   Simon Glass
  • [PATCH v3 12/17] dm: irq: Add support for requesting interrupts   Simon Glass
  • [PATCH v3 13/17] x86: Add support for ACPI general-purpose events   Simon Glass
  • [PATCH v3 14/17] x86: coral: Add I2C and TPM device-tree definitions   Simon Glass
  • [PATCH v3 15/17] tpm: Add more TPM2 definitions   Simon Glass
  • [PATCH v3 16/17] tpm: Add a driver for H1/Cr50   Simon Glass
    • [PATCH v3 16/17] tpm: Add a driver for H1/Cr50   Bin Meng
  • [PATCH v3 17/17] x86: coral: Enable TPM   Simon Glass
  • [PATCH v3 00/17] x86: coral: Add support for Cr50   Bin Meng
    • [PATCH v3 00/17] x86: coral: Add support for Cr50   Simon Glass
      • [PATCH v3 00/17] x86: coral: Add support for Cr50   Bin Meng
      • [PATCH v3 00/17] x86: coral: Add support for Cr50   Simon Glass
• [v8 1/8] rtc: pcf8563: Add driver model support   Biwen Li
  • [v8 1/8] rtc: pcf8563: Add driver model support   Priyanka Jain
    • [v8 1/8] rtc: pcf8563: Add driver model support   Biwen Li
• [PATCH v3 07/32] gpio: Rename free() to rfree()   Simon Glass
  • [PATCH v3 07/32] gpio: Rename free() to rfree()   sjg at google.com
• [PATCH 2/3] sunxi: Add Libre Computer ALL-H3-IT H5 board   Chen-Yu Tsai
• [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Heinrich Schuchardt
  • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Ard Biesheuvel
    • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Heinrich Schuchardt
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Heinrich Schuchardt
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Daniel Kiper
    • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Atish Patra
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Alexander Graf
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Atish Patra
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Alexander Graf
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Ard Biesheuvel
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Atish Patra
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Chang, Abner (HPS SW/FW Technologist)
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Heinrich Schuchardt
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Chang, Abner (HPS SW/FW Technologist)
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Ard Biesheuvel
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Atish Patra
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Ard Biesheuvel
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Atish Patra
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Chang, Abner (HPS SW/FW Technologist)
  • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Alexander Graf
    • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Chang, Abner (HPS SW/FW Technologist)
    • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Ard Biesheuvel
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Chang, Abner (HPS SW/FW Technologist)
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Ard Biesheuvel
      • [PATCH v2 1/1] efi_loader: architecture specific UEFI setup   Chang, Abner (HPS SW/FW Technologist)
• pull request of u-boot-fsl-qoriq for v2020.04-rc2   Priyanka Jain
  • pull request of u-boot-fsl-qoriq for v2020.04-rc2   Tom Rini
• [PATCH v3 0/2] gpio: add possibility to search for gpio label name   Heiko Schocher
  • [PATCH v3 1/2] sandbox, test: add test for GPIO_HOG function   Heiko Schocher
    • [PATCH v3 1/2] sandbox, test: add test for GPIO_HOG function   Simon Glass
  • [PATCH v3 2/2] gpio: search for gpio label if gpio is not found through bank name   Heiko Schocher
    • [PATCH v3 2/2] gpio: search for gpio label if gpio is not found through bank name   Simon Glass
• [v8 7/8] dm: arm64: ls1046a: add i2c DM support   Priyanka Jain
• [v8 6/8] dm: arm64: ls1043a: add i2c DM support   Priyanka Jain
• [PATCH] configs: ls1012ardb: Enable CONFIG_SYS_RELOC_GD_ENV_ADDR   Priyanka Jain
• [PATCH v4 2/3] arm: ls1028a: use the new flexspi driver   Priyanka Jain
• [PATCH v4] board: fsl: lx2160a: Add support to reset to eMMC   Priyanka Jain (OSS)
• [PATCH 1/4] arm: dts: ls1028a: Add FSPI node properties   Priyanka Jain
• [PATCH] configs: ls1021a: Reserve low memory for CMA   Priyanka Jain (OSS)
• [PATCH 1/1] armv8: lx2160a: Updates secure boot headers offset   Priyanka Jain (OSS)
• [PATCH 1/2] armv8: ls1088a: Updates secure boot headers offset   Priyanka Jain (OSS)
• [PATCH 1/1] board: ls1012ardb: do not use imply CONFIG_   Priyanka Jain (OSS)
• [PATCH] board_f: Make clear_bss generic   Ovidiu Panait
  • [PATCH] board_f: Make clear_bss generic   Tom Rini
• [PATCH] mmc: fsl_esdhc: actually enable cache snooping on mpc830x   Peng Fan
  • [PATCH] mmc: fsl_esdhc: actually enable cache snooping on mpc830x   Y.b. Lu
    • [PATCH] mmc: fsl_esdhc: actually enable cache snooping on mpc830x   Rasmus Villemoes
• [PATCH v2] mx6sxsabresd: Keep only one target   Peng Fan
  • [PATCH v2] mx6sxsabresd: Keep only one target   sbabic at denx.de
• dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Heiko Schocher
  • dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Simon Glass
    • dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Heiko Schocher
      • dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Simon Glass
      • dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Heiko Schocher
      • dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Simon Glass
      • dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Mario Six
      • dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Heiko Schocher
      • dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Heiko Schocher
      • dm, serial: problem with using ns16550 driver before relocation on mpc83xx   Simon Glass
• [GIT PULL] Raspberry Pi updates for v2020.04   Matthias Brugger
  • [GIT PULL] Raspberry Pi updates for v2020.04   Tom Rini
• Time frame for "Refactor the architecture parts of mt7628 "?   Mauro Condarelli
• fw_printenv resulting in bad crc, using default environment   Robert Varga
  • fw_printenv resulting in bad crc, using default environment   Anatolij Gustschin
    • [EXT] Re: fw_printenv resulting in bad crc, using default environment   Robert Varga
• [PATCH] imx8mm/mn: Add missing root clock entry for ARM core clock   Schrempf Frieder
  • [PATCH] imx8mm/mn: Add missing root clock entry for ARM core clock   Fabio Estevam
• [PATCH v3 02/10] arm: k3: Add support for loading non linux remote cores   Lokesh Vutla
• [PATCH 1/2] menu: Make some parts of the menu available to other components   Schrempf Frieder
  • [PATCH 1/2] menu: Make some parts of the menu available to other components   Schrempf Frieder
• [RESEND v8 6/8] dm: arm64: ls1043a: add i2c DM support   Biwen Li
  • [RESEND v8 7/8] dm: arm64: ls1046a: add i2c DM support   Biwen Li
• [U-Boot] Sharing a hardware lab   Simon Glass
  • [U-Boot] Sharing a hardware lab   Stephen Warren
    • [U-Boot] Sharing a hardware lab   Simon Glass
    • [U-Boot] Sharing a hardware lab   Tom Rini
      • [U-Boot] Sharing a hardware lab   Simon Glass
  • [U-Boot] Sharing a hardware lab   Heiko Schocher
    • [U-Boot] Sharing a hardware lab   Simon Glass
      • [U-Boot] Sharing a hardware lab   Heiko Schocher
      • [U-Boot] Sharing a hardware lab   Simon Glass
      • [U-Boot] Sharing a hardware lab   Harald Seiler
• [PATCH v2 1/2] menu: Add a function to set the default by matching the item data   Schrempf Frieder
  • [PATCH v2 2/2] pxe: Get default selection from board type if label matches   Schrempf Frieder
    • [PATCH v2 2/2] pxe: Get default selection from board type if label matches   Simon Glass
  • [PATCH v2 1/2] menu: Add a function to set the default by matching the item data   Simon Glass
• Problem building u-boot   Olivier BERTON
  • Problem building u-boot   Jerry Van Baren
• [PATCH v1] imx: imx8qm: enable relocation of fdt and initrd   Oliver Graute
  • [PATCH v1] imx: imx8qm: enable relocation of fdt and initrd   Tom Rini
    • [PATCH v1] imx: imx8qm: enable relocation of fdt and initrd   Oliver Graute
      • [PATCH v1] imx: imx8qm: enable relocation of fdt and initrd   Tom Rini
• uEnv.txt not read on eMMC Beaglebone black   Benjamin Freeman
  • uEnv.txt not read on eMMC Beaglebone black   Benjamin Freeman
• [PATCH 1/3] video: add support for drawing 8bpp bitmap on 32bpp framebuffer   Anatolij Gustschin
  • [PATCH 2/3] splash: fix banner output on small displays   Anatolij Gustschin
  • [PATCH 3/3] imx: mx6ul_14x14_evk: configure for 24bpp display   Anatolij Gustschin
    • [PATCH 3/3] imx: mx6ul_14x14_evk: configure for 24bpp display   Fabio Estevam
• [PATCH] doc: dm: debugging: Fix the steps for activating debug   sjg at google.com
• [PATCH 21/21] test: Add a way to check each line of console output   sjg at google.com
• [PATCH 20/21] test: Enable console recording in tests   sjg at google.com
• [PATCH 19/21] console: Add a function to read a line of the output / eof   sjg at google.com
  • [PATCH 19/21] console: Add a function to read a line of the output / eof   Heinrich Schuchardt
    • [PATCH 19/21] console: Add a function to read a line of the output / eof   Tom Rini
      • [PATCH 19/21] console: Add a function to read a line of the output / eof   Tom Rini
• [PATCH 18/21] sandbox: pmic: Correct i2c pmic emulator platdata method   sjg at google.com
• [PATCH 17/21] bloblist: Zero records when adding   sjg at google.com
• [PATCH 16/21] bloblist: Tidy up a few comments and code-style nits   sjg at google.com
• [PATCH 15/21] bloblist: Add a new function to add or check size   sjg at google.com
• [PATCH 14/21] dm: core: Drop uclass_find_next_free_req_seq() conditions   sjg at google.com
• [PATCH 12/21] dm: core: Add a way to read platdata for all child devices   sjg at google.com
• [PATCH 13/21] dm: core: Add a way to iterate through children, probing each   sjg at google.com
• [PATCH 11/21] dm: core: Add ofnode_get_chosen_prop()   sjg at google.com
• [PATCH 10/21] dm: core: Reimplement ofnode_read_size()   sjg at google.com
• [PATCH 09/21] dm: core: Add ofnode_read_prop()   sjg at google.com
• [PATCH 08/21] dm: core: Rename ofnode_get_chosen_prop()   sjg at google.com
• [PATCH 07/21] dm: core: Update comment for ofnode_get_chosen_node()   sjg at google.com
• [PATCH 06/21] test: Add underscore prefix to macro parameters   sjg at google.com
• [PATCH 05/21] dm: core: Use const device for the dev_read_...() interface   sjg at google.com
• [PATCH 04/21] dm: core: Use const device for the devfdt...() interface   sjg at google.com
• [PATCH 03/21] dm: pci: Update a few more interfaces for const udevice *   sjg at google.com
• [PATCH 01/21] dm: core: Use const where possible in device.h   sjg at google.com
• [PATCH] dtc: add ability to make nodes conditional on them being referenced   sjg at google.com
• [PATCH] buildman: Enable buildman on aarch64 hosts   sjg at google.com
• [PATCH V3 2/2] cmd: tpm: add a subcommand device   sjg at google.com
• [PATCH V3 1/2] tpm: add a helper to iterate on all tpm devices   sjg at google.com
• [PATCH 1/1] pci: definition of pci_addr_t and pci_size_t   Heinrich Schuchardt
  • [PATCH 1/1] pci: definition of pci_addr_t and pci_size_t   Simon Glass
    • [PATCH 1/1] pci: definition of pci_addr_t and pci_size_t   Heinrich Schuchardt
      • [PATCH 1/1] pci: definition of pci_addr_t and pci_size_t   Simon Glass
• [PATCH v2 1/1] pci: definition of pci_addr_t and pci_size_t   Heinrich Schuchardt
  • [PATCH v2 1/1] pci: definition of pci_addr_t and pci_size_t   Simon Glass
  • [PATCH v2 1/1] pci: definition of pci_addr_t and pci_size_t   Tom Rini
• qnap nas uboot emmc flash   tonyp
• Pull request for UEFI sub-system for efi-2020-04-rc2   Heinrich Schuchardt
  • Pull request for UEFI sub-system for efi-2020-04-rc2   Tom Rini
• [Patch v2] configs: lx2160a: Enable FSPI support   Kuldeep Singh
• [PATCH v3 1/2] menu: Add a function to set the default by matching the item data   Schrempf Frieder
  • [PATCH v3 2/2] pxe: Get default selection from board type if label matches   Schrempf Frieder
    • [PATCH v3 2/2] pxe: Get default selection from board type if label matches   Simon Glass
      • [PATCH v3 2/2] pxe: Get default selection from board type if label matches   Schrempf Frieder
  • [PATCH v3 1/2] menu: Add a function to set the default by matching the item data   Simon Glass
    • [PATCH v3 1/2] menu: Add a function to set the default by matching the item data   Schrempf Frieder
• Support UBI u-boot   Andy Pont
  • Support UBI u-boot   JH
    • [yocto] Support UBI u-boot   Gabriele Zampieri
      • [yocto] Support UBI u-boot   JH
      • [yocto] Support UBI u-boot   JH
      • [yocto] Support UBI u-boot   Gabriele Zampieri
      • [yocto] Support UBI u-boot   JH
      • [yocto] Support UBI u-boot   Gabriele Zampieri
      • [yocto] Support UBI u-boot   JH
      • [yocto] Support UBI u-boot   JH
      • [yocto] Support UBI u-boot   JH
      • [OE-core] [yocto] Support UBI u-boot   Quentin Schulz
  • Support UBI u-boot   JH
• [PATCH] mips: vcoreiii: Ajust CONFIG_SYS_MEMTEST_END   Lars Povlsen
  • [PATCH] mips: vcoreiii: Ajust CONFIG_SYS_MEMTEST_END   Daniel Schwierzeck
• [PATCH] mips: vcoreiii: Fix cache coherency issues   Lars Povlsen
  • [PATCH] mips: vcoreiii: Fix cache coherency issues   Daniel Schwierzeck
• [PATCH 0/2] Fix usb host boot mode in AM437x-gp-evm   Faiz Abbas
  • [PATCH 1/2] configs: am43xx_evm_usbhost: Add configs for USB Host boot mode   Faiz Abbas
  • [PATCH 2/2] configs: am43xx_evm_usbhost_boot: Add device for environment   Faiz Abbas
  • [PATCH 0/2] Fix usb host boot mode in AM437x-gp-evm   Lokesh Vutla
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Nico Becker
  • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
    • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Nico Becker
      • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Nico Becker
      • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Simon Goldschmidt
      • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Simon Goldschmidt
      • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Simon Goldschmidt
      • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Dalon L Westergreen
• [PATCH 1/2] board: solidrun lx2160a-cex7: new board   Baruch Siach
  • [PATCH 1/2] board: solidrun lx2160a-cex7: new board   Priyanka Jain (OSS)
• [PATCH] tools: env: remove include of env.h   Martin Hundebøll
• [PATCH] tools: env: enable PIC for static library   Martin Hundebøll
• [PATCH] net: phy: dp83867: Clean force link good bit   Michal Simek
  • [PATCH] net: phy: dp83867: Clean force link good bit   Grygorii Strashko
  • [PATCH] net: phy: dp83867: Clean force link good bit   Michal Simek
• [PATCH] net: zynq: Free allocated buffers in case of error   Michal Simek
  • [PATCH] net: zynq: Free allocated buffers in case of error   Michal Simek
• [PATCH] test: aes: fix memleak   Philippe Reynes
  • [PATCH] test: aes: fix memleak   Tom Rini
• [PATCH v4 00/17] x86: coral: Add support for Cr50   Simon Glass
  • [PATCH v4 01/17] dm: core: Allow iterating devices without uclass_get()   Simon Glass
  • [PATCH v4 02/17] dm: core: Add a function to find a device by drvdata   Simon Glass
  • [PATCH v4 03/17] dm: core: Change syscon to use helper function   Simon Glass
  • [PATCH v4 04/17] tegra: i2c: Change driver to use helper function   Simon Glass
  • [PATCH v4 05/17] x86: Add a clock driver for Intel devices   Simon Glass
  • [PATCH v4 06/17] x86: apl: Use the clock driver   Simon Glass
  • [PATCH v4 07/17] x86: apl: Drop the I2C config in FSP-S   Simon Glass
  • [PATCH v4 08/17] x86: coral: Update i2c and rtc status   Simon Glass
  • [PATCH v4 09/17] dm: irq: Add support for interrupt controller types   Simon Glass
  • [PATCH v4 10/17] x86: Give each driver an IRQ type   Simon Glass
  • [PATCH v4 11/17] x86: itss: Add of-platdata support   Simon Glass
  • [PATCH v4 12/17] dm: irq: Add support for requesting interrupts   Simon Glass
  • [PATCH v4 13/17] x86: Add support for ACPI general-purpose events   Simon Glass
  • [PATCH v4 14/17] x86: coral: Add I2C and TPM device-tree definitions   Simon Glass
  • [PATCH v4 15/17] tpm: Add more TPM2 definitions   Simon Glass
  • [PATCH v4 16/17] tpm: Add a driver for H1/Cr50   Simon Glass
  • [PATCH v4 17/17] x86: coral: Enable TPM   Simon Glass
  • [PATCH v4 00/17] x86: coral: Add support for Cr50   Bin Meng
• [PATCH v3] cmd: Add command to dump drivers and compatible strings   Sean Anderson
  • [PATCH v3] cmd: Add command to dump drivers and compatible strings   Simon Glass
    • [PATCH v3] cmd: Add command to dump drivers and compatible strings   Bin Meng
      • [PATCH v3] cmd: Add command to dump drivers and compatible strings   Sean Anderson
      • [PATCH v3] cmd: Add command to dump drivers and compatible strings   Simon Glass
• FYI: Please pull u-boot-dm   Simon Glass
  • FYI: Please pull u-boot-dm   Tom Rini
    • FYI: Please pull u-boot-dm   Simon Glass
  • FYI: Please pull u-boot-dm   Stephen Warren
    • FYI: Please pull u-boot-dm   Simon Glass
      • FYI: Please pull u-boot-dm   Simon Glass
      • FYI: Please pull u-boot-dm   Simon Glass
      • FYI: Please pull u-boot-dm   Tom Rini
      • FYI: Please pull u-boot-dm   Stephen Warren
      • FYI: Please pull u-boot-dm   Tom Rini
      • FYI: Please pull u-boot-dm   Stephen Warren
      • FYI: Please pull u-boot-dm   Tom Rini
      • FYI: Please pull u-boot-dm   Stephen Warren
  • FYI: Please pull u-boot-dm   Tom Rini
    • FYI: Please pull u-boot-dm   Tom Rini
      • FYI: Please pull u-boot-dm   Simon Glass
      • FYI: Please pull u-boot-dm   Anatolij Gustschin
      • FYI: Please pull u-boot-dm   Tom Rini
      • FYI: Please pull u-boot-dm   Simon Glass
• [PATCH v4 6/6] board: presidio-asic: Add basic G3 engr. development board support   Alex Nemirovsky
  • [PATCH v4 6/6] board: presidio-asic: Add basic G3 engr. development board support   Tom Rini
• [PATCH] configs: fix typos in khadas-edge defconfigs   Jared Baldridge
• [PATCH 1/2] configs: arm64: ls1012afrdm Enable CONFIG_BLK   Ran Wang
  • [PATCH 2/2] configs: arm: ls1021aiot: enable CONFIG_DM_USB support   Ran Wang
• [PATCH] efi_loader: add some description about UEFI secure boot   AKASHI Takahiro
  • [PATCH] efi_loader: add some description about UEFI secure boot   Ilias Apalodimas
  • [PATCH] efi_loader: add some description about UEFI secure boot   Heinrich Schuchardt
• Modifying uboot of Jetson TX2 board to add additional UART   vinmean
  • Modifying uboot of Jetson TX2 board to add additional UART   vinmean
• arm: imx6: configure NoC on i.MX6DQP   Bernhard Messerklinger
• [PATCH] ARM: ti: Increase the allocated size for MLO.raw   Faiz Abbas
  • [PATCH] ARM: ti: Increase the allocated size for MLO.raw   Tom Rini
• [PATCH v1] colibri_imx7: add README file   Igor Opaniuk
  • [PATCH v1] colibri_imx7: add README file   Oleksandr Suvorov
  • [PATCH v1] colibri_imx7: add README file   Bin Meng
    • [PATCH v1] colibri_imx7: add README file   Igor Opaniuk
• [PATCH] net: phy: dp83867: Do not check sgmii if rgmii is already used   Michal Simek
  • [PATCH] net: phy: dp83867: Do not check sgmii if rgmii is already used   Grygorii Strashko
    • [PATCH] net: phy: dp83867: Do not check sgmii if rgmii is already used   Michal Simek
      • [PATCH] net: phy: dp83867: Do not check sgmii if rgmii is already used   Grygorii Strashko
      • [PATCH] net: phy: dp83867: Do not check sgmii if rgmii is already used   Michal Simek
      • [PATCH] net: phy: dp83867: Do not check sgmii if rgmii is already used   Grygorii Strashko
      • [PATCH] net: phy: dp83867: Do not check sgmii if rgmii is already used   Michal Simek
      • [PATCH] net: phy: dp83867: Do not check sgmii if rgmii is already used   Grygorii Strashko
      • [PATCH] net: phy: dp83867: Do not check sgmii if rgmii is already used   Michal Simek
• [PATCH] lib: Improve _parse_integer_fixup_radix base 16 detection   Michal Simek
  • [PATCH] lib: Improve _parse_integer_fixup_radix base 16 detection   Michal Simek
    • [PATCH] lib: Improve _parse_integer_fixup_radix base 16 detection   Tom Rini
      • [PATCH] lib: Improve _parse_integer_fixup_radix base 16 detection   Michal Simek
• [PATCH] net: convert NET_MAXDEFRAG to Kconfig   Rasmus Villemoes
  • [PATCH] net: convert NET_MAXDEFRAG to Kconfig   Simon Glass
  • [PATCH] net: convert NET_MAXDEFRAG to Kconfig   Tom Rini
• [PATCH 1/4] i2c: Make deblock delay and SCL clock configurable   Marek Vasut
  • [PATCH 2/4] i2c: Export i2c_deblock_gpio_loop()   Marek Vasut
    • [PATCH 2/4] i2c: Export i2c_deblock_gpio_loop()   Heiko Schocher
  • [PATCH 3/4] i2c: Add option to send start condition after deblocking   Marek Vasut
    • [PATCH 3/4] i2c: Add option to send start condition after deblocking   Heiko Schocher
      • [PATCH 3/4] i2c: Add option to send start condition after deblocking   Marek Vasut
  • [PATCH 4/4] i2c: gpio: Run deblock sequence on probe   Marek Vasut
    • [PATCH 4/4] i2c: gpio: Run deblock sequence on probe   Heiko Schocher
      • [PATCH 4/4] i2c: gpio: Run deblock sequence on probe   Marek Vasut
  • [PATCH 1/4] i2c: Make deblock delay and SCL clock configurable   Heiko Schocher
• enabling CONFIG_FIT_SIGNATURE breaks U-Boot   Rasmus Villemoes
  • enabling CONFIG_FIT_SIGNATURE breaks U-Boot   Rasmus Villemoes
    • enabling CONFIG_FIT_SIGNATURE breaks U-Boot   Rasmus Villemoes
• [PATCH] azure: Use our own GRUB binaries   Tom Rini
  • [PATCH] azure: Use our own GRUB binaries   Tom Rini
• [PATCH 1/2] dm: i2c-gpio: rework gpio get/set functions   Michael Auchter
  • [PATCH 1/2] dm: i2c-gpio: rework gpio get/set functions   Heiko Schocher
• [PATCH 2/2] dm: i2c-gpio: add support for clock stretching   Michael Auchter
  • [PATCH 2/2] dm: i2c-gpio: add support for clock stretching   Heiko Schocher
• [PATCH] azure/gitlab: Update to Docker to have SDL2 available   Tom Rini
  • [PATCH] azure/gitlab: Update to Docker to have SDL2 available   Tom Rini
• [PATCH 1/1] gitlab: use our own GRUB   Tom Rini
• [PATCH 1/1] doc: board: add Rockchip to doc/board/index.rst   Heinrich Schuchardt
  • [PATCH 1/1] doc: board: add Rockchip to doc/board/index.rst   Tom Rini
• [PATCH 1/1] efi_loader: fix efi_install_fdt() description   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/6] fat: write: fix broken write to fragmented files   Tom Rini
• [U-Boot] [PATCH v4 2/6] fat: write: adjust data written in each partial write   Tom Rini
• [U-boot, 1/4] eth: mtk-eth: add sgmii mode support in mediatek eth driver   Tom Rini
• [U-boot, 2/4] eth: mtk-eth: add mt7622 support in mediatek eth driver   Tom Rini
• [U-boot, 3/4] arm: dts: mediatek: add ethernet and sgmii dts node for mt7622   Tom Rini
• [U-boot,4/4] configs: mediatek: enable mt7622 ethernet support   Tom Rini
• [PATCH] cmd/elf.c: Add SPDX tag   Tom Rini
• [PATCH] mpc8xx: Expose show_regs()   Tom Rini
• [PATCH v4 1/6] MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc.   Tom Rini
• [PATCH v4 2/6] gpio: do not include <asm/arch/gpio.h> for Cortina CAxxxx SoCs   Tom Rini
• [PATCH v4 3/6] gpio: cortina_gpio: add DM_GPIO driver for CAxxxx SoCs   Tom Rini
• [PATCH v4 4/6] watchdog: cortina_wdt: add support for HW WDT on CAxxxx SoCs   Tom Rini
• [PATCH v4 5/6] serial: serial_cortina: add UART DM driver for CAxxxx SoCs   Tom Rini
• [PATCH v3] eth: mtk-eth: aarch64: fix build warnings on ethernet-driver   Tom Rini
• Something wrong with gitlab.denx.de   Bin Meng
• [PATCH v3][ 1/6] board: tbs2910: disable loadb and loads commands   Denis 'GNUtoo' Carikli
  • [PATCH v3][ 3/6] board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfig   Denis 'GNUtoo' Carikli
  • [PATCH v3][ 4/6] board: tbs2910: enable CONFIG_DISTRO_DEFAULTS   Denis 'GNUtoo' Carikli
    • [PATCH v3][ 4/6] board: tbs2910: enable CONFIG_DISTRO_DEFAULTS   Soeren Moch
      • [PATCH v3][ 4/6] board: tbs2910: enable CONFIG_DISTRO_DEFAULTS   Tom Rini
      • [PATCH v3][ 4/6] board: tbs2910: enable CONFIG_DISTRO_DEFAULTS   Denis 'GNUtoo' Carikli
      • [PATCH v3][ 4/6] board: tbs2910: enable CONFIG_DISTRO_DEFAULTS   Tom Rini
  • [PATCH v3][ 5/6] board: tbs2910: Enable distro_boot support.   Denis 'GNUtoo' Carikli
  • [PATCH v3][ 6/6] boards: tbs2910: add README   Denis 'GNUtoo' Carikli
    • [PATCH v3][ 6/6] boards: tbs2910: add README   Soeren Moch
    • [PATCH v3][ 6/6] boards: tbs2910: add README   Bin Meng
• [PATCH v3][ 2/6] board: tbs2910: disable CONFIG_GZIP   Denis 'GNUtoo' Carikli
• [PATCH v3 0/6] Introduce DSA Ethernet switch class and Felix driver   Vladimir Oltean
• [PATCH] sandbox: p2sb: Silence compiler warning   Simon Glass
  • [PATCH] sandbox: p2sb: Silence compiler warning   Bin Meng
    • [PATCH] sandbox: p2sb: Silence compiler warning   Stephen Warren
      • [PATCH] sandbox: p2sb: Silence compiler warning   Tom Rini
      • [PATCH] sandbox: p2sb: Silence compiler warning   Simon Glass
      • [PATCH] sandbox: p2sb: Silence compiler warning   Tom Rini
• [PATCH 001/108] cpu: Support querying the address width   Bin Meng
• [PATCH 002/108] spi: Add SPI mode enums   Bin Meng
• [PATCH 003/108] tpm: cr50: Release locality on exit   Bin Meng
• [PATCH 004/108] tpm: cr50: Tidy up various comments   Bin Meng
• [PATCH 005/108] tpm: cr50: Use the correct GPIO binding   Bin Meng
• [PATCH 006/108] tpm: Don't cleanup unless an error happens   Bin Meng
• [PATCH 007/108] dm: pci: Allow disabling auto-config for a device   Bin Meng
  • [PATCH 007/108] dm: pci: Allow disabling auto-config for a device   Simon Glass
    • [PATCH 007/108] dm: pci: Allow disabling auto-config for a device   Bin Meng
      • [PATCH 007/108] dm: pci: Allow disabling auto-config for a device   Simon Glass
      • [PATCH 007/108] dm: pci: Allow disabling auto-config for a device   Bin Meng
• [PATCH 008/108] x86: Correct wording of coreboot source code   Bin Meng
• [PATCH 009/108] x86: apl: Move p2sb ofdata reading to the correct method   Bin Meng
  • Antwort: Re: [PATCH 009/108] x86: apl: Move p2sb ofdata reading to the correct method   Wolfgang Wallner
• [PATCH 010/108] pci: Adjust dm_pci_read_bar32() to return errors correctly   Bin Meng
• [PATCH 011/108] x86: apl: Add Global NVS table header   Bin Meng
• [PATCH 012/108] dm: core: Add basic ACPI support   Bin Meng
• [PATCH 014/108] acpi: Add a simple sandbox test   Bin Meng
• [PATCH 015/108] x86: Move acpi_table header to main include/ directory   Bin Meng
• [PATCH 1/1] log: correct CONFIG_LOG_TEST prerequisites   Heinrich Schuchardt
  • [PATCH 1/1] log: correct CONFIG_LOG_TEST prerequisites   Bin Meng
  • [PATCH 1/1] log: correct CONFIG_LOG_TEST prerequisites   Simon Glass
• [PATCH 1/1] net: designware: speed should be in a debug message   Heinrich Schuchardt
  • [PATCH 1/1] net: designware: speed should be in a debug message   Bin Meng
    • [PATCH 1/1] net: designware: speed should be in a debug message   Heinrich Schuchardt
      • [PATCH 1/1] net: designware: speed should be in a debug message   Bin Meng
      • [PATCH 1/1] net: designware: speed should be in a debug message   Heinrich Schuchardt
• [PATCH 1/1] log: syslog driver   Heinrich Schuchardt
  • [PATCH 1/1] log: syslog driver   Simon Glass
    • [PATCH 1/1] log: syslog driver   Heinrich Schuchardt
• [PATCHv6 0/5] Odroid n2 using eMMC would fail to boot up   Anand Moon
  • [PATCHv6 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Anand Moon
    • [PATCHv6 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Neil Armstrong
      • [PATCHv6 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Anand Moon
      • [PATCHv6 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Neil Armstrong
      • [PATCHv6 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Anand Moon
      • [PATCHv6 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Neil Armstrong
      • [PATCHv6 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Anand Moon
      • [PATCHv6 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Jerome Brunet
      • [PATCHv6 1/5] mmc: meson-gx: Fix clk phase tuning for MMC   Anand Moon
  • [PATCHv6 2/5] mmc: meson-gx: Use proper compatible string as per the dts   Anand Moon
    • [PATCHv6 2/5] mmc: meson-gx: Use proper compatible string as per the dts   Neil Armstrong
      • [PATCHv6 2/5] mmc: meson-gx: Use proper compatible string as per the dts   Anand Moon
      • [PATCHv6 2/5] mmc: meson-gx: Use proper compatible string as per the dts   Neil Armstrong
  • [PATCHv6 3/5] arm: dts: gx: Move common nodes to the -u-boot.dtsi   Anand Moon
    • [PATCHv6 3/5] arm: dts: gx: Move common nodes to the -u-boot.dtsi   Neil Armstrong
      • [PATCHv6 3/5] arm: dts: gx: Move common nodes to the -u-boot.dtsi   Anand Moon
      • [PATCHv6 3/5] arm: dts: gx: Move common nodes to the -u-boot.dtsi   Neil Armstrong
  • [PATCHv6 4/5] arm: dts: g12: Move common nodes to the -u-boot.dtsi   Anand Moon
    • [PATCHv6 4/5] arm: dts: g12: Move common nodes to the -u-boot.dtsi   Neil Armstrong
      • [PATCHv6 4/5] arm: dts: g12: Move common nodes to the -u-boot.dtsi   Anand Moon
  • [PATCHv6 5/5] arm: dts: s400: Move common nodes to the -u-boot.dtsi   Anand Moon
    • [PATCHv6 5/5] arm: dts: s400: Move common nodes to the -u-boot.dtsi   Neil Armstrong
      • [PATCHv6 5/5] arm: dts: s400: Move common nodes to the -u-boot.dtsi   Anand Moon
• [U-Boot] logging   Heinrich Schuchardt
  • [U-Boot] logging   Simon Glass
• [PATCH v3 1/6] net: introduce DSA class for Ethernet switches   Vladimir Oltean
• [U-Boot] [PATCH] net: eth-uclass: Remove warning about ROM MAC address   Joe Hershberger
• [PATCH 00/11] Add DM/DTS support for omap video driver   Dario Binacchi
  • [PATCH 01/11] video: omap: use BIT() macro   Dario Binacchi
    • [PATCH 01/11] video: omap: use BIT() macro   Lokesh Vutla
  • [PATCH 02/11] video: omap: add missing bitfield masks   Dario Binacchi
    • [PATCH 02/11] video: omap: add missing bitfield masks   Lokesh Vutla
  • [PATCH 03/11] video: omap: fix coding style on use of spaces   Dario Binacchi
  • [PATCH 04/11] video: omap: fix bitfields order   Dario Binacchi
  • [PATCH 05/11] video: omap: rename LCD controller registers   Dario Binacchi
  • [PATCH 06/11] video: omap: fix debug message   Dario Binacchi
    • [PATCH 06/11] video: omap: fix debug message   Lokesh Vutla
  • [PATCH 07/11] video: omap: add loop exit conditions to the dpll setup   Dario Binacchi
    • [PATCH 07/11] video: omap: add loop exit conditions to the dpll setup   Lokesh Vutla
  • [PATCH 08/11] video: omap: create two routines to set the pixel clock rate   Dario Binacchi
  • [PATCH 09/11] video: omap: add support for DM/DTS   Dario Binacchi
    • [PATCH 09/11] video: omap: add support for DM/DTS   Lokesh Vutla
  • [PATCH 10/11] arm: fdt: omap: update dts panel node   Dario Binacchi
    • [PATCH 10/11] arm: fdt: omap: update dts panel node   Lokesh Vutla
      • [PATCH 10/11] arm: fdt: omap: update dts panel node   Tom Rini
      • [PATCH 10/11] arm: fdt: omap: update dts panel node   Tom Rini
      • [PATCH 10/11] arm: fdt: omap: update dts panel node   dariobin at libero.it
  • [PATCH 11/11] fdt: video: omap: add framebuffer and panel bindings   Dario Binacchi
    • [PATCH 11/11] fdt: video: omap: add framebuffer and panel bindings   Simon Glass
  • [PATCH 00/11] Add DM/DTS support for omap video driver   Adam Ford
• [PATCH] omap: move GPIO_TO_PIN macro to asm/arch-am33xx/gpio   Dario Binacchi
  • [PATCH] omap: move GPIO_TO_PIN macro to asm/arch-am33xx/gpio   Lokesh Vutla
• [PATCH] dm: fix design.rst document   Dario Binacchi
  • [PATCH] dm: fix design.rst document   Bin Meng
  • [PATCH] dm: fix design.rst document   Tom Rini
• [PATCH 1/1] log: output for CONFIG_LOG=n   Heinrich Schuchardt
  • [PATCH 1/1] log: output for CONFIG_LOG=n   Sean Anderson
    • [PATCH 1/1] log: output for CONFIG_LOG=n   Heinrich Schuchardt
      • [PATCH 1/1] log: output for CONFIG_LOG=n   Simon Glass
      • [PATCH 1/1] log: output for CONFIG_LOG=n   Heinrich Schuchardt
      • [PATCH 1/1] log: output for CONFIG_LOG=n   Simon Glass
• [PATCH] arm: mach-k3: Fix nomenclature on Silicon Revisions   Lokesh Vutla
  • [PATCH] arm: mach-k3: Fix nomenclature on Silicon Revisions   Lokesh Vutla
• [PATCH] board: lx2160aqds: Add board fixup for PCIe nodes.   Vikas Singh
• [Patch v2 1/2] configs: ls2080ardb: Make MC_INIT access flash memory as per spi-mem   Kuldeep Singh
• [Patch v2 2/2] configs: ls2080ardb: Make BOOT command access flash memory as per spi-mem   Kuldeep Singh
• [U-Boot] Pull request: u-boot-riscv/master   uboot at andestech.com
  • [U-Boot] Pull request: u-boot-riscv/master   Tom Rini
• [RESEND] sunxi: Add Inet 86V Rev 2 support   agriveaux at deutnet.info
  • [PATCH] sunxi: Add Inet 86V Rev 2 support   agriveaux at deutnet.info
    • [PATCH] sunxi: Add Inet 86V Rev 2 support   Maxime Ripard
    • [PATCH] sunxi: Add Inet 86V Rev 2 support   agriveaux at deutnet.info
• [PATCH v1 1/5] arm: xea: defconfig: Define space for redundant envs in SPI-NOR flash   sbabic at denx.de
• [U-Boot, 08/13] board: ge: bx50v3: Enable DM PWM for backlight   sbabic at denx.de
• [PATCH 1/1] tools: imx8m_image: fix warning message   sbabic at denx.de
• [PATCH v2 1/2] gpio: Let DM_74X164 be built without CONFIG_SPL_GPIO   sbabic at denx.de
• [PATCH v3 3/7] toradex: tdx-cfg-block: add Verdin iMX8M Mini/Nano support   sbabic at denx.de
• [PATCH V2 4/4] mx7dsabre: Fix usbtog probe when use dfu or ums   sbabic at denx.de
• [PATCH v3 2/7] toradex: tdx-cfg-block: add Apalis iMX8X support   sbabic at denx.de
• [U-Boot, 07/13] board: ge: bx50v3: override panel   sbabic at denx.de
• [U-Boot, 13/13] board: ge: bx50v3, imx53ppd: configure CONFIG_SYS_BOOTMAPSZ   sbabic at denx.de
• [PATCH V2 2/4] warp7: remove unused usb configs   sbabic at denx.de
• [PATCH v2 2/2] mx6ul_14x14_evk: Move CONFIG_DM_74X164 to defconfig   sbabic at denx.de
• [PATCH v1 4/5] arm: xea: spl: Add GPIO0_0 setup on spl_board_init   sbabic at denx.de
• [U-Boot, 09/13] board: ge: mx53ppd: Use DM for ethernet   sbabic at denx.de
• [U-Boot, 10/13] board: ge: bx50v3: use DM for uart   sbabic at denx.de
• [PATCH v3 6/7] board: toradex: verdin-imx8mm: add MAINTAINERS   sbabic at denx.de
• [U-Boot, 06/13] board: ge: mx53ppd: enable DM_VIDEO   sbabic at denx.de
• [PATCH v1 2/5] arm: xea: Provide function to set L2 switch 'local-mac-address' property   sbabic at denx.de
• [PATCH] mx7ulp_com: Remove unneeded SoC definitions   sbabic at denx.de
• [PATCH 1/3] ARM: imx: novena: Move defconfig bits to arch Kconfig   sbabic at denx.de
• [U-Boot, 01/13] misc: i2c_eeprom: set offset len and chip addr offset mask   sbabic at denx.de
• [PATCH V2 3/4] arm: dts: imx7s-warp7: Move u-boot specific node in u-boot.dtsi   sbabic at denx.de
• [PATCH v1 5/5] arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental disablement   sbabic at denx.de
• [PATCH] imx6: aristainetos: fix NAND detection with latest mainline   sbabic at denx.de
• [PATCH 2/3] ARM: imx: novena: Enable DM ethernet   sbabic at denx.de
• [PATCH] imx: mx6ul_14x14_evk: turn of backlight and LCD before booting OS   sbabic at denx.de
• [U-Boot, 03/13] board: ge: bx50v3, imx53ppd: use DM I2C   sbabic at denx.de
• [PATCH 2/4] mx6sabresd: Convert PCI to driver model   sbabic at denx.de
• [U-Boot, 12/13] board: ge: bx50v3, mx53ppd: fix firstboot detection   sbabic at denx.de
• [PATCH 3/3] ARM: imx: novena: Enable DM thermal   sbabic at denx.de
• [PATCH v1 3/5] arm: xea: config: Enable support for XEA board specific device tree tweaks   sbabic at denx.de
• [U-Boot, 05/13] board: ge: mx53ppd: add i2c eeprom bootcount storage   sbabic at denx.de
• [PATCH v3 4/7] board: toradex: Add Verdin iMX8M Mini support   sbabic at denx.de
• [PATCH v3 1/7] arm: dts: imx8mm-pinfunc: sync latest linux-next pin func header   sbabic at denx.de
• [PATCH v3 5/7] board: toradex: verdin-imx8mm: add README   sbabic at denx.de
• [PATCH V2 1/4] warp7: Fix the pmic_get() parameter in the DM case   sbabic at denx.de
• [PATCH 1/4] mx6sabre_common: Remove FEC related settings   sbabic at denx.de
• [PATCH v3 7/7] imx: imx8mm_evk: spelling in readme file   sbabic at denx.de
• [U-Boot, 04/13] board: ge: bx50v3: add i2c eeprom bootcount storage   sbabic at denx.de
• [U-Boot, 02/13] board: ge: bx50v3, imx53ppd: add eeprom partitions   sbabic at denx.de
• [PATCH] cmd: mdc/mwc: normalize disjoint MX_CYCLIC usage   sbabic at denx.de
• [U-Boot, 11/13] board: ge: mx53ppd: use DM for uart   sbabic at denx.de
• [PATCH 3/4] mx6sabresd: Convert ethernet to driver model   Stefano Babic
• [PATCH 4/4] mx6sabreauto: Convert to DM_ETH   Stefano Babic
• [PATCH v2 06/10] mmc: am654_sdhci: Implement workaround for card detect   Faiz Abbas
  • [PATCH v2 06/10] mmc: am654_sdhci: Implement workaround for card detect   Simon Goldschmidt
    • [PATCH v2 06/10] mmc: am654_sdhci: Implement workaround for card detect   Simon Glass
• [u-boot PATCH] board: ti: am57xx-idk: Prevent boot for invalid configuation   Roger Quadros
  • [u-boot PATCH] board: ti: am57xx-idk: Prevent boot for invalid configuation   Lokesh Vutla
• [PATCH] regulator: fix: Move code to enable gpio regulator to pre_probe from ofdata_to_platdata   Lukasz Majewski
  • [PATCH] regulator: fix: Move code to enable gpio regulator to pre_probe from ofdata_to_platdata   Tom Rini
• [MAINTENANCE] Downtime on lists.denx.de / gitlab.denx.de   Wolfgang Denk
• rpmb driver in u-boot   王帅卿
• [PATCH] stm32mp1: remove fdt_high and initrd_high in environment   Patrick Delaunay
  • [PATCH] stm32mp1: remove fdt_high and initrd_high in environment   Tom Rini
  • [PATCH] stm32mp1: remove fdt_high and initrd_high in environment   Patrick DELAUNAY
• [PATCH 8/9] doc: add board documentation for stm32mp1   Patrick DELAUNAY
  • [PATCH 8/9] doc: add board documentation for stm32mp1   Patrice CHOTARD
• [PATCH v3 01/10] misc: add driver for the Sifive otp controller   Pragnesh Patel
• [PATCH 2/5] cmd: env: use ENV_IS_IN_DEVICE in env info   Patrick DELAUNAY
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200210   Stefano Babic
  • [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200210   Tom Rini
• [PATCH v2] mx6sabresd: Convert ethernet to driver model   Alifer Moraes
  • [PATCH v2] mx6sabresd: Convert ethernet to driver model   Fabio Estevam
• [PATCH v3 01/20] mips: add support to restore exception vector base before booting linux   Daniel Schwierzeck
  • [PATCH v3 01/20] mips: add support to restore exception vector base before booting linux   Daniel Schwierzeck
• [PATCH v3 02/20] mips: mtmips: add predefined i-cache/d-cache size and linesize   Daniel Schwierzeck
• [PATCH v3 03/20] mips: add an option to support initialize SRAM for initial stack   Daniel Schwierzeck
• [PATCH 016/108] acpi: Add an __ACPI__ preprocessor symbol   Bin Meng
• [PATCH 017/108] acpi: Add a central location for table version numbers   Bin Meng
• [PATCH 018/108] acpi: Add support for DMAR   Bin Meng
• [PATCH 019/108] acpi: Move acpi_fill_header() to generic code   Bin Meng
• [PATCH 020/108] acpi: Add a method to write tables for a device   Bin Meng
• [PATCH v3 04/20] mips: start.S: avoid overwriting outside gd when clearing global data in stack   Daniel Schwierzeck
• [PATCH v3 05/20] sysreset: add reset controller based reboot driver   Daniel Schwierzeck
  • [PATCH v3 05/20] sysreset: add reset controller based reboot driver   Bin Meng
• [PATCH v3 06/20] mips: mtmips: make use of sysreset-resetctrl for mt7628 soc   Daniel Schwierzeck
• [PATCH v3 07/20] configs: enable CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips boards   Daniel Schwierzeck
• [PATCH v3 08/20] mips: add a mtmips-specific field to architecture-specific global data   Daniel Schwierzeck
• [PATCH v3 09/20] mips: add a option to support not reserving malloc space on initial stack   Daniel Schwierzeck
• [PATCH v1] dfu: Reset timeout in case of DFU request   Andy Shevchenko
  • [PATCH v1] dfu: Reset timeout in case of DFU request   Andy Shevchenko
• [PATCH v3 10/20] mips: mtmips: rewrite lowlevel codes of mt7628   Daniel Schwierzeck
  • [PATCH v3 10/20] mips: mtmips: rewrite lowlevel codes of mt7628   Daniel Schwierzeck
• [PATCH v2 0/7] cmd: env: add option for quiet output on env info   Patrick Delaunay
• [PATCH v2 1/7] cmd: env: add option for quiet output on env info   Patrick Delaunay
• [PATCH v2 2/7] cmd: env: use ENV_IS_IN_DEVICE in env info   Patrick Delaunay
• [PATCH v2 3/7] cmd: env: check real location for env info command   Patrick Delaunay
  • [PATCH v2 3/7] cmd: env: check real location for env info command   Simon Glass
• [PATCH v2 4/7] stm32mp1: use the command env info in env_check   Patrick Delaunay
• [PATCH v2 5/7] stm32mp1: configs: activate CMD_ERASEENV   Patrick Delaunay
• [PATCH v2 6/7] configs: sandbox: Enable sub command 'env info'   Patrick Delaunay
  • [PATCH v2 6/7] configs: sandbox: Enable sub command 'env info'   Simon Glass
• [PATCH v2 7/7] test: env: add test for env info sub-command   Patrick Delaunay
  • [PATCH v2 7/7] test: env: add test for env info sub-command   Stephen Warren
    • [PATCH v2 7/7] test: env: add test for env info sub-command   Patrick DELAUNAY
• Please pull u-boot-video   Anatolij Gustschin
  • Please pull u-boot-video   Tom Rini
• [PATCH v3 13/20] mips: add an option to enable u_boot_list section for SPL loaders in u-boot-spl.lds   Daniel Schwierzeck
• [PATCH v3 11/20] dts: mtmips: add alternative pinmux node for uart2   Daniel Schwierzeck
• [PATCH v3 12/20] mips: enable support for appending dtb to spl binary   Daniel Schwierzeck
• [PATCH v3 00/20] Refactor the architecture parts of mt7628   Daniel Schwierzeck
  • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Mauro Condarelli
    • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Daniel Schwierzeck
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Mauro Condarelli
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Stefan
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Mauro Condarelli
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Stefan
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Daniel Schwierzeck
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Stefan
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Mauro Condarelli
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Daniel Schwierzeck
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Mauro Condarelli
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Stefan
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Mauro Condarelli
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Stefan
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Daniel Schwierzeck
      • [PATCH v3 00/20] Refactor the architecture parts of mt7628   Stefan
• [PATCH] eth: Fix crash while enabling fixed-phy   Mikle Lappo
• [PATCH] eth: Fixed-phy support in r-car   Mikle Lappo
• PCI / PCIe related dts issues   Tom Rini
• [PATCH] ARM: keystone2: enable initrd fixup for LPAE addressing   Lokesh Vutla
  • [PATCH] ARM: keystone2: enable initrd fixup for LPAE addressing   Tom Rini
    • [PATCH] ARM: keystone2: enable initrd fixup for LPAE addressing   Lokesh Vutla
      • [PATCH] ARM: keystone2: enable initrd fixup for LPAE addressing   Tom Rini
  • [PATCH] ARM: keystone2: enable initrd fixup for LPAE addressing   Lokesh Vutla
• [PATCH 1/1] test: log functions with CONFIG_LOG=n   Heinrich Schuchardt
  • [PATCH 1/1] test: log functions with CONFIG_LOG=n   Simon Glass
    • [PATCH 1/1] test: log functions with CONFIG_LOG=n   Heinrich Schuchardt
• [PATCH] arm: dts: lx2160aqds: Enable FSPI node properties   Kuldeep Singh
• [PATCH v4 00/17] riscv: Add Sipeed Maix support   Sean Anderson
  • [PATCH v4 01/17] clk: Always use the supplied struct clk   Sean Anderson
  • [PATCH v4 02/17] clk: Check that ops of composite clock components exist before calling   Sean Anderson
  • [PATCH v4 03/17] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
    • [PATCH v4 03/17] clk: Unconditionally recursively en-/dis-able clocks   Rick Chen
      • [PATCH v4 03/17] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
      • [PATCH v4 03/17] clk: Unconditionally recursively en-/dis-able clocks   Rick Chen
  • [PATCH v4 04/17] reset: Add generic reset driver   Sean Anderson
    • [PATCH v4 04/17] reset: Add generic reset driver   Simon Glass
  • [PATCH v4 05/17] dm: Add support for simple-pm-bus   Sean Anderson
    • [PATCH v4 05/17] dm: Add support for simple-pm-bus   Simon Glass
      • [PATCH v4 05/17] dm: Add support for simple-pm-bus   Sean Anderson
  • [PATCH v4 06/17] spi: dw: Add device tree properties for fields in CTRL1   Sean Anderson
    • [PATCH v4 06/17] spi: dw: Add device tree properties for fields in CTRL1   Simon Glass
    • [PATCH v4 06/17] spi: dw: Add device tree properties for fields in CTRL1   Rick Chen
      • [PATCH v4 06/17] spi: dw: Add device tree properties for fields in CTRL1   Sean Anderson
  • [PATCH v4 07/17] spi: dw: Add mem_ops   Sean Anderson
    • [PATCH v4 07/17] spi: dw: Add mem_ops   Rick Chen
      • [PATCH v4 07/17] spi: dw: Add mem_ops   Sean Anderson
      • [PATCH v4 07/17] spi: dw: Add mem_ops   Rick Chen
      • [PATCH v4 07/17] spi: dw: Add mem_ops   Sean Anderson
      • [PATCH v4 07/17] spi: dw: Add mem_ops   Bin Meng
  • [PATCH v4 08/17] riscv: Add headers for asm/global_data.h   Sean Anderson
    • [PATCH v4 08/17] riscv: Add headers for asm/global_data.h   Bin Meng
  • [PATCH v4 09/17] riscv: Add option to support RISC-V privileged spec 1.9.1   Sean Anderson
    • [PATCH v4 09/17] riscv: Add option to support RISC-V privileged spec 1.9.1   Bin Meng
  • [PATCH v4 10/17] riscv: Allow use of reset drivers   Sean Anderson
  • [PATCH v4 11/17] riscv: Add K210 pll support   Sean Anderson
  • [PATCH v4 12/17] riscv: Add a bypass clock for K210   Sean Anderson
    • [PATCH v4 12/17] riscv: Add a bypass clock for K210   Rick Chen
      • [PATCH v4 12/17] riscv: Add a bypass clock for K210   Sean Anderson
      • [PATCH v4 12/17] riscv: Add a bypass clock for K210   Rick Chen
  • [PATCH v4 13/17] riscv: Add K210 clock support   Sean Anderson
  • [PATCH v4 14/17] riscv: Try to get cpu frequency from device tree   Sean Anderson
    • [PATCH v4 14/17] riscv: Try to get cpu frequency from device tree   Bin Meng
      • [PATCH v4 14/17] riscv: Try to get cpu frequency from device tree   Sean Anderson
  • [PATCH v4 15/17] riscv: Enable cpu clock if it is present   Sean Anderson
  • [PATCH v4 16/17] riscv: Add device tree for K210   Sean Anderson
  • [PATCH v4 17/17] riscv: Add Sipeed Maix support   Sean Anderson
• [Patch v2 0/3] Enable octal read support for mt35xu* flashes   Kuldeep Singh
  • [Patch v2 3/3] arm: dts: lx2160a: Add RX, TX buswidth in qspi to use octal mode   Kuldeep Singh
• [Patch v2 1/3] mtd: spi-nor-ids: Enable SPI_NOR_OCTAL_READ flag for mt35xu*   Kuldeep Singh
  • [Patch v2 1/3] mtd: spi-nor-ids: Enable SPI_NOR_OCTAL_READ flag for mt35xu*   Vignesh Raghavendra
• [Patch v2 2/3] arm: dts: ls1028a: Add RX, TX buswidth in qspi to use octal mode   Kuldeep Singh
• [PATCH] Add CONFIG_OF_SEPARATE in sifive_fu540_defconfig   Pragnesh Patel
  • [PATCH] Add CONFIG_OF_SEPARATE in sifive_fu540_defconfig   Bin Meng
    • [PATCH] Add CONFIG_OF_SEPARATE in sifive_fu540_defconfig   Pragnesh Patel
• [PATCH] configs: ls1046a: Define ENV_ADDR value   Kuldeep Singh
  • [PATCH] configs: ls1088a: Correct ENV_ADDR value   Kuldeep Singh
  • [PATCH] configs: ls2080a: Correct ENV_ADDR value   Kuldeep Singh
• [PATCH 0/3] RFC: add fdt_add_pubkey tool   Rasmus Villemoes
  • [PATCH 1/3] test_vboot.py: remove extraneous -k option to fit_check_sign   Rasmus Villemoes
    • [PATCH 1/3] test_vboot.py: remove extraneous -k option to fit_check_sign   Simon Glass
  • [PATCH 2/3] tools: add fdt_add_pubkey   Rasmus Villemoes
    • [PATCH 2/3] tools: add fdt_add_pubkey   Alex Kiernan
      • [PATCH 2/3] tools: add fdt_add_pubkey   Rasmus Villemoes
      • [PATCH 2/3] tools: add fdt_add_pubkey   Alex Kiernan
    • [PATCH 2/3] tools: add fdt_add_pubkey   Simon Glass
  • [PATCH 3/3] test_vboot.py: include test of fdt_add_pubkey tool   Rasmus Villemoes
• [PATCH v2] colibri_imx7: add readme.rst doc   Igor Opaniuk
  • [PATCH v2] colibri_imx7: add readme.rst doc   Bin Meng
  • [PATCH v2] colibri_imx7: add readme.rst doc   Max Krummenacher
• [PATCH] arm64: zynqmp: Print multiboot register value in EL3   Michal Simek
• [PATCH 1/1] common/console.c: discard volatile   Heinrich Schuchardt
  • [PATCH 1/1] common/console.c: discard volatile   Simon Glass
• [PATCH v1 1/3] verdix-imx8mm: convert readme to reStructuredText   Igor Opaniuk
  • [PATCH v1 2/3] apalis-imx8: convert readme to reStructuredText   Igor Opaniuk
  • [PATCH v1 3/3] colibri-imx8x: convert readme to reStructuredText   Igor Opaniuk
• dm: core: Board failing to boot since commit 82de42fa1468 (parent data/probe)   Wolfgang Wallner
  • dm: core: Board failing to boot since commit 82de42fa1468 (parent data/probe)   Simon Glass
    • dm: core: Board failing to boot since commit 82de42fa1468 (parent data/probe)   Bin Meng
      • Antwort: Re: dm: core: Board failing to boot since commit 82de42fa1468 (parent data/probe)   Wolfgang Wallner
      • dm: core: Board failing to boot since commit 82de42fa1468 (parent data/probe)   Simon Glass
      • dm: core: Board failing to boot since commit 82de42fa1468 (parent data/probe)   Bin Meng
• [PATCH resend 0/2] gpio: mpc8xxx: honour shadow register when writing gpdat   Rasmus Villemoes
• [PATCH v3 1/5] doc: board: colibri_imx7: add readme.rst   Igor Opaniuk
  • [PATCH v3 2/5] doc: board: verdin-imx8mm: convert readme to reST   Igor Opaniuk
    • [PATCH v3 2/5] doc: board: verdin-imx8mm: convert readme to reST   Heinrich Schuchardt
  • [PATCH v3 3/5] doc: board: apalis-imx8: convert readme to reST   Igor Opaniuk
    • [PATCH v3 3/5] doc: board: apalis-imx8: convert readme to reST   Heinrich Schuchardt
  • [PATCH v3 4/5] doc: board: colibri-imx8x: convert readme to reST   Igor Opaniuk
    • [PATCH v3 4/5] doc: board: colibri-imx8x: convert readme to reST   Heinrich Schuchardt
  • [PATCH v3 5/5] doc: board: add rockchip subfolder   Igor Opaniuk
    • [PATCH v3 5/5] doc: board: add rockchip subfolder   Heinrich Schuchardt
      • [PATCH v3 5/5] doc: board: add rockchip subfolder   Heinrich Schuchardt
  • [PATCH v3 1/5] doc: board: colibri_imx7: add readme.rst   Heinrich Schuchardt
    • [PATCH v3 1/5] doc: board: colibri_imx7: add readme.rst   Igor Opaniuk
      • [PATCH v3 1/5] doc: board: colibri_imx7: add readme.rst   Igor Opaniuk
      • [PATCH v3 1/5] doc: board: colibri_imx7: add readme.rst   Heinrich Schuchardt
      • [PATCH v3 1/5] doc: board: colibri_imx7: add readme.rst   Igor Opaniuk
• [PATCH resend 0/5] spi: mpc8xxx_spi: bug fixes, real ->set_speed and a pseudo-gpio driver   Rasmus Villemoes
  • [PATCH resend 1/5] gpio/mpc83xx_spisel_boot.c: gpio driver for SPISEL_BOOT signal   Rasmus Villemoes
  • [PATCH resend 2/5] gazerbeam: add clocks property to SPI node   Rasmus Villemoes
  • [PATCH resend 3/5] mpc8xxx_spi: put max_cs to use   Rasmus Villemoes
  • [PATCH resend 5/5] mpc8xxx_spi: implement real ->set_speed   Rasmus Villemoes
  • [PATCH resend 4/5] mpc8xxx_spi: always use 8-bit characters, don't read or write garbage   Rasmus Villemoes
• [PATCH v3 12/21] actions: add Cubieboard7 README   Tom Rini
• [PATCH v3 00/21] Actions S700 SoC support   Manivannan Sadhasivam
  • [PATCH v3 00/21] Actions S700 SoC support   Amit Tomer
  • [PATCH v3 00/21] Actions S700 SoC support   Manivannan Sadhasivam
• [PATCH] travis/gitlab/azure: Ensure we use python3 always   Tom Rini
  • [PATCH] travis/gitlab/azure: Ensure we use python3 always   Tom Rini
• [PATCH] sandbox: Update PCI nodes in dts files   Tom Rini
• [BUG] binman: Add a library to access binman entries   Simon Glass
  • [BUG] binman: Add a library to access binman entries   Frank Wunderlich
    • [BUG] binman: Add a library to access binman entries   Simon Glass
      • [BUG] binman: Add a library to access binman entries   Frank Wunderlich
      • [BUG] binman: Add a library to access binman entries   Simon Glass
      • Aw: Re: [BUG] binman: Add a library to access binman entries   Frank Wunderlich
      • [BUG] binman: Add a library to access binman entries   Simon Glass
      • [BUG] binman: Add a library to access binman entries   Frank Wunderlich
• [PATCH] Revert "gitlab: Disable SDL when building sandbox"   Simon Glass
  • [PATCH] Revert "gitlab: Disable SDL when building sandbox"   Tom Rini
• [PATCH] arm: K3: j721e: Fix boot parameter table index memory address   Lokesh Vutla
  • [PATCH] arm: K3: j721e: Fix boot parameter table index memory address   Lokesh Vutla
• [PATCH] armV7R: K3: am654: Activate early console functionality   Lokesh Vutla
  • [PATCH] armV7R: K3: am654: Activate early console functionality   Lokesh Vutla
• [PATCH v4 00/20] Refactor the architecture parts of mt7628   Weijie Gao
• [PATCH v4 01/20] mips: add support to restore exception vector base before booting linux   Weijie Gao
• [PATCH v4 02/20] mips: mtmips: add predefined i-cache/d-cache size and linesize   Weijie Gao
• [PATCH v4 03/20] mips: add an option to support initialize SRAM for initial stack   Weijie Gao
• [PATCH v4 04/20] mips: start.S: avoid overwriting outside gd when clearing global data in stack   Weijie Gao
• [PATCH v4 05/20] sysreset: add reset controller based reboot driver   Weijie Gao
• [PATCH v4 06/20] mips: mtmips: make use of sysreset-resetctrl for mt7628 soc   Weijie Gao
• [PATCH v4 07/20] configs: enable CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips boards   Weijie Gao
• [PATCH v4 08/20] mips: add a mtmips-specific field to architecture-specific global data   Weijie Gao
• [PATCH v4 09/20] mips: add a option to support not reserving malloc space on initial stack   Weijie Gao
• [PATCH v4 10/20] mips: mtmips: rewrite lowlevel codes of mt7628   Weijie Gao
• [PATCH v4 11/20] dts: mtmips: add alternative pinmux node for uart2   Weijie Gao
• [PATCH v4 12/20] mips: enable support for appending dtb to spl binary   Weijie Gao
• [PATCH v4 13/20] mips: add an option to enable u_boot_list section for SPL loaders in u-boot-spl.lds   Weijie Gao
• [PATCH v4 14/20] lib: enable lzma decompression support for SPL build   Weijie Gao
• [PATCH v4 15/20] Makefile: add support to generate LZMA compressed u-boot image   Weijie Gao
• [PATCH v4 16/20] tools: binman: add etype file for u-boot-lzma-img   Weijie Gao
• [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Weijie Gao
  • [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Simon Goldschmidt
    • [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Weijie Gao
      • [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Stefan Roese
      • [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Simon Goldschmidt
      • [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Weijie Gao
      • [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Simon Goldschmidt
      • [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Simon Goldschmidt
      • [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Stefan
      • [PATCH v4 17/20] spl: nor: add lzma decompression support for legacy image   Simon Goldschmidt
• [PATCH v4 18/20] mips: mtmips: add SPL support   Weijie Gao
  • [PATCH v4 18/20] mips: mtmips: add SPL support   Stefan Roese
  • [PATCH v4 18/20] mips: mtmips: add SPL support   Weijie Gao
    • [PATCH v4 18/20] mips: mtmips: add SPL support   Stefan Roese
• [PATCH v4 19/20] mips: mtmips: enable SPL for all boards   Weijie Gao
• [PATCH v4 20/20] mips: mtmips: add support for mt7628-rfb   Weijie Gao
• [PATCH v2] board: lx2160a: Correct board fixup for PCIe nodes   Vikas Singh
• [PATCH v8 0/9] Add support for loading main_r5fss0_core0   Keerthy
  • [PATCH v8 1/9] lib: elf: Move the generic elf loading/validating functions to lib   Keerthy
  • [PATCH v8 2/9] arm: k3: Add support for loading non linux remote cores   Keerthy
  • [PATCH v8 3/9] armv7R: K3: r5_mpu: Enable execute permission for MCU0 BTCM   Keerthy
  • [PATCH v8 4/9] armv7R: K3: Add support for jumping to firmware   Keerthy
  • [PATCH v8 5/9] arm: dts: k3-j721e-r5-u-boot: Add fs_loader node   Keerthy
  • [PATCH v8 6/9] arm: dts: k3-j721e-r5: Enable r5fss0 cluster in SPL   Keerthy
  • [PATCH v8 7/9] include: configs: j721e_evm: Add env variables for mcu_r5fss0_core0 & main_r5fss0_core0   Keerthy
  • [PATCH v8 8/9] configs: j721e_evm_r5: Enable R5F remoteproc support   Keerthy
  • [PATCH v8 9/9] configs: j721e_evm_r5_defconfig: Remove saving ENV in eMMC   Keerthy
  • [PATCH v8 0/9] Add support for loading main_r5fss0_core0   Lokesh Vutla
• [PATCH v5 00/20] Refactor the architecture parts of mt7628   Weijie Gao
  • [PATCH v5 00/20] Refactor the architecture parts of mt7628   Simon Goldschmidt
    • [PATCH v5 00/20] Refactor the architecture parts of mt7628   Weijie Gao
      • [PATCH v5 00/20] Refactor the architecture parts of mt7628   Simon Goldschmidt
• [PATCH v5 01/20] mips: add support to restore exception vector base before booting linux   Weijie Gao
• [PATCH v5 02/20] mips: mtmips: add predefined i-cache/d-cache size and linesize   Weijie Gao
• [PATCH v5 03/20] mips: add an option to support initialize SRAM for initial stack   Weijie Gao
• [PATCH v5 04/20] mips: start.S: avoid overwriting outside gd when clearing global data in stack   Weijie Gao
• [PATCH v5 05/20] sysreset: add reset controller based reboot driver   Weijie Gao
• [PATCH v5 06/20] mips: mtmips: make use of sysreset-resetctrl for mt7628 soc   Weijie Gao
• [PATCH v5 07/20] configs: enable CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips boards   Weijie Gao
• [PATCH v5 08/20] mips: add a mtmips-specific field to architecture-specific global data   Weijie Gao
• [PATCH v5 09/20] mips: add a option to support not reserving malloc space on initial stack   Weijie Gao
• [PATCH v5 10/20] mips: mtmips: rewrite lowlevel codes of mt7628   Weijie Gao
• [PATCH v5 11/20] dts: mtmips: add alternative pinmux node for uart2   Weijie Gao
• [PATCH v5 12/20] mips: enable support for appending dtb to spl binary   Weijie Gao
• [PATCH v5 13/20] mips: add an option to enable u_boot_list section for SPL loaders in u-boot-spl.lds   Weijie Gao
• [PATCH v5 14/20] lib: enable lzma decompression support for SPL build   Weijie Gao
• [PATCH v5 15/20] Makefile: add support to generate LZMA compressed u-boot image   Weijie Gao
• [PATCH v5 16/20] tools: binman: add etype file for u-boot-lzma-img   Weijie Gao
  • [PATCH v5 16/20] tools: binman: add etype file for u-boot-lzma-img   Simon Glass
• [PATCH v5 17/20] spl: nor: add lzma decompression support for legacy image   Weijie Gao
  • [PATCH v5 17/20] spl: nor: add lzma decompression support for legacy image   Simon Goldschmidt
• [PATCH v5 18/20] mips: mtmips: add SPL support   Weijie Gao
• [PATCH v5 19/20] mips: mtmips: enable SPL for all boards   Weijie Gao
• [PATCH v5 20/20] mips: mtmips: add support for mt7628-rfb   Weijie Gao
• [PATCH v4 1/2] menu: Add a function to set the default by matching the item data   Schrempf Frieder
  • [PATCH v4 2/2] pxe: Get default selection from board type if label matches   Schrempf Frieder
    • [PATCH v4 2/2] pxe: Get default selection from board type if label matches   Simon Glass
  • [PATCH v4 1/2] menu: Add a function to set the default by matching the item data   Schrempf Frieder
  • [PATCH v4 1/2] menu: Add a function to set the default by matching the item data   Simon Glass
• [PATCH] ARC: rework setting of ARC CPU specific compiler options   Eugeniy Paltsev
• [PATCH] arm: baltos: switch to driver model for the net and mdio driver   yegorslists at googlemail.com
• [PATCH v2] imx: imx8qm: enable relocation of fdt and initrd   Oliver Graute
  • [PATCH v2] imx: imx8qm: enable relocation of fdt and initrd   Tom Rini
• [PATCH 00/33] sandbox: Move to SDL2   Wolfgang Denk
  • [PATCH 00/33] sandbox: Move to SDL2   Simon Glass
• [PATCH] cmd: go: Flush cache before jumping to app/image   Stefan Roese
  • [PATCH] cmd: go: Flush cache before jumping to app/image   Daniel Schwierzeck
    • [PATCH] cmd: go: Flush cache before jumping to app/image   Mauro Condarelli
      • [PATCH] cmd: go: Flush cache before jumping to app/image   Stefan
      • [PATCH] cmd: go: Flush cache before jumping to app/image   Mauro Condarelli
      • [PATCH] cmd: go: Flush cache before jumping to app/image   Stefan
    • [PATCH] cmd: go: Flush cache before jumping to app/image   Stefan
• [PATCH v3 0/7] cmd: env: add option for quiet output on env info   Patrick Delaunay
  • [PATCH v3 3/7] cmd: env: check real location for env info command   Patrick Delaunay
  • [PATCH v3 6/7] configs: sandbox: Enable sub command 'env info'   Patrick Delaunay
• [PATCH v3 1/7] cmd: env: add option for quiet output on env info   Patrick Delaunay
• [PATCH v3 2/7] cmd: env: use ENV_IS_IN_DEVICE in env info   Patrick Delaunay
• [PATCH v3 4/7] stm32mp1: use the command env info in env_check   Patrick Delaunay
• [PATCH v3 5/7] stm32mp1: configs: activate CMD_ERASEENV   Patrick Delaunay
• [PATCH v3 7/7] test: env: add test for env info sub-command   Patrick Delaunay
• [PATCH 10/33] mtd: Rename free() to rfree()   Masahiro Yamada
  • [PATCH 10/33] mtd: Rename free() to rfree()   Simon Glass
    • [PATCH 10/33] mtd: Rename free() to rfree()   Simon Goldschmidt
      • [PATCH 10/33] mtd: Rename free() to rfree()   Simon Glass
• [PATCH] mips: cmd: go: Flush cache before jumping to app/image   Stefan Roese
  • [PATCH] mips: cmd: go: Flush cache before jumping to app/image   Mauro Condarelli
  • [PATCH] mips: cmd: go: Flush cache before jumping to app/image   Daniel Schwierzeck
• [PATCH v4 0/6] doc: board: toradex reST documentation   Igor Opaniuk
  • [PATCH v4 1/6] doc: board: toradex: add colibri_imx7.rst   Igor Opaniuk
    • [PATCH v4 1/6] doc: board: toradex: add colibri_imx7.rst   Bin Meng
      • [PATCH v4 1/6] doc: board: toradex: add colibri_imx7.rst   Igor Opaniuk
  • [PATCH v4 2/6] doc: board: verdin-imx8mm: convert readme to reST   Igor Opaniuk
  • [PATCH v4 3/6] doc: board: apalis-imx8: convert readme to reST   Igor Opaniuk
  • [PATCH v4 4/6] doc: board: colibri-imx8x: convert readme to reST   Igor Opaniuk
  • [PATCH v4 5/6] toradex: MAINTAINERS: entries for new reST docs   Igor Opaniuk
  • [PATCH v4 6/6] doc: board: add rockchip subfolder   Igor Opaniuk
• [Question] SPL_SPI Invalid bus 0. SPI Probe failed.   dvo
• [PATCH v5 0/6] doc: board: toradex reST documentation   Igor Opaniuk
  • [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst   Igor Opaniuk
    • [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst   Oleksandr Suvorov
    • [PATCH v5 1/6] doc: board: toradex: add colibri_imx7.rst   Bin Meng
  • [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST   Igor Opaniuk
    • [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST   Oleksandr Suvorov
    • [PATCH v5 2/6] doc: board: verdin-imx8mm: convert readme to reST   Bin Meng
  • [PATCH v5 3/6] doc: board: apalis-imx8: convert readme to reST   Igor Opaniuk
    • [PATCH v5 3/6] doc: board: apalis-imx8: convert readme to reST   Oleksandr Suvorov
    • [PATCH v5 3/6] doc: board: apalis-imx8: convert readme to reST   Bin Meng
  • [PATCH v5 4/6] doc: board: colibri-imx8x: convert readme to reST   Igor Opaniuk
    • [PATCH v5 4/6] doc: board: colibri-imx8x: convert readme to reST   Oleksandr Suvorov
    • [PATCH v5 4/6] doc: board: colibri-imx8x: convert readme to reST   Bin Meng
  • [PATCH v5 5/6] toradex: MAINTAINERS: entries for new reST docs   Igor Opaniuk
    • [PATCH v5 5/6] toradex: MAINTAINERS: entries for new reST docs   Bin Meng
  • [PATCH v5 6/6] doc: board: add rockchip subfolder   Igor Opaniuk
    • [PATCH v5 6/6] doc: board: add rockchip subfolder   Oleksandr Suvorov
    • [PATCH v5 6/6] doc: board: add rockchip subfolder   Bin Meng
  • [PATCH v5 0/6] doc: board: toradex reST documentation   Bin Meng
• [PATCH v5] Add support for SoM "VoCore2".   Mauro Condarelli
  • [PATCH v5] Add support for SoM "VoCore2".   Daniel Schwierzeck
    • [PATCH v5] Add support for SoM "VoCore2".   Mauro Condarelli
      • [PATCH v5] Add support for SoM "VoCore2".   Mauro Condarelli
      • [PATCH v5] Add support for SoM "VoCore2".   Mauro Condarelli
      • [PATCH v5] Add support for SoM "VoCore2".   Weijie Gao
      • [PATCH v5] Add support for SoM "VoCore2".   Daniel Schwierzeck
  • [PATCH v5] Add support for SoM "VoCore2".   Weijie Gao
    • [PATCH v5] Add support for SoM "VoCore2".   Mauro Condarelli
      • [PATCH v5] Add support for SoM "VoCore2".   Mauro Condarelli
  • [PATCH v5] Add support for SoM "VoCore2".   Stefan
    • [PATCH v5] Add support for SoM "VoCore2".   Mauro Condarelli
      • [PATCH v5] Add support for SoM "VoCore2".   Stefan
      • [PATCH v5] Add support for SoM "VoCore2".   Mauro Condarelli
• [ADMIN] Change of Mailing List configuration   Wolfgang Denk
  • [ADMIN] Change of Mailing List configuration   Tom Rini
• [ANN] New PGP key for Tom Rini   Tom Rini
  • [ANN] New PGP key for Tom Rini   Tom Rini
• i.MX8QXP MEK does not boot   Fabio Estevam
  • i.MX8QXP MEK does not boot   Fabio Estevam
    • i.MX8QXP MEK does not boot   Peng Fan
      • i.MX8QXP MEK does not boot   Fabio Estevam
    • i.MX8QXP MEK does not boot   Anatolij Gustschin
      • i.MX8QXP MEK does not boot   Fabio Estevam
      • i.MX8QXP MEK does not boot   Fabio Estevam
• [PATCH v2 1/1] common/console.c: discard volatile   Heinrich Schuchardt
  • [PATCH v2 1/1] common/console.c: discard volatile   Tom Rini
• [PATCH 1/3 v2] ARC: nSIM: switch from ARC UART to DW UART   Alexey Brodkin
• [PATCH 2/3 v2] ARC: nsim_{700|700be|hs38be}_defconfigs: Disable networking   Alexey Brodkin
• [PATCH 3/3 v2] ARC: nsim_hs38: Add support of Virtio NET & BLK   Alexey Brodkin
• [PATCH] mx6slevk: Convert to DM_ETH   Pedro Jardim
• [PATCH v2 1/1] test: log functions with CONFIG_LOG=n   Heinrich Schuchardt
• [PATCH 00/10]   Patrick Delaunay
  • [PATCH 03/10] env: correctly handle result in env_init   Patrick Delaunay
  • [PATCH 07/10] env: ext4: fix possible compilation issue   Patrick Delaunay
  • [PATCH 08/10] env: ext4: introduce new function env_ext4_save_buffer   Patrick Delaunay
  • [PATCH 09/10] env: ext4: add support of command env erase   Patrick Delaunay
• [PATCH 01/10] env: add absolute path at CONFIG_ENV_EXT4_FILE   Patrick Delaunay
• [PATCH 02/10] env: ext4: set gd->env_valid   Patrick Delaunay
• [PATCH 04/10] sandbox: activate env in ext4 support   Patrick Delaunay
• [PATCH 05/10] sandbox: support the change of env location   Patrick Delaunay
• [PATCH 06/10] test: environment in ext4   Patrick Delaunay
• [PATCH 10/10] test: sandbox: add test for erase command   Patrick Delaunay
• [PATCH 00/10] stm32mp1: board and SOC identifications   Patrick Delaunay
  • [PATCH 03/10] arm: stm32mp: bsec: remove unneeded test   Patrick Delaunay
  • [PATCH 04/10] arm: stm32mp: bsec: add permanent lock support in bsec driver   Patrick Delaunay
  • [PATCH 05/10] board: stm32mp1: stboard: lock the OTP after programming   Patrick Delaunay
  • [PATCH 06/10] arm: stm32mp: improve the error message for smc   Patrick Delaunay
  • [PATCH 07/10] board: stm32mp1: add finished good in board identifier OTP   Patrick Delaunay
  • [PATCH 08/10] board: stm32mp1: display reference only for STMicroelectronics board   Patrick Delaunay
  • [PATCH 09/10] arm: stm32mp: add function get_soc_name   Patrick Delaunay
  • [PATCH 10/10] arm: stm32mp: fdt: update kernel device tree according the part number   Patrick Delaunay
• [PATCH 01/10] board: stm32mp1: update command stboard on misc_write result   Patrick Delaunay
• [PATCH 02/10] board: stm32mp1: read OTP in command stboard   Patrick Delaunay
• [RESEND PATCH 00/10] env: ext4: add test for env in ext4   Patrick Delaunay
  • [RESEND PATCH 02/10] env: ext4: set gd->env_valid   Patrick Delaunay
  • [RESEND PATCH 03/10] env: correctly handle result in env_init   Patrick Delaunay
  • [RESEND PATCH 04/10] sandbox: activate env in ext4 support   Patrick Delaunay
    • [RESEND PATCH 04/10] sandbox: activate env in ext4 support   Simon Glass
  • [RESEND PATCH 05/10] sandbox: support the change of env location   Patrick Delaunay
    • [RESEND PATCH 05/10] sandbox: support the change of env location   Simon Glass
  • [RESEND PATCH 06/10] test: environment in ext4   Patrick Delaunay
    • [RESEND PATCH 06/10] test: environment in ext4   Stephen Warren
  • [RESEND PATCH 07/10] env: ext4: fix possible compilation issue   Patrick Delaunay
  • [RESEND PATCH 08/10] env: ext4: introduce new function env_ext4_save_buffer   Patrick Delaunay
  • [RESEND PATCH 09/10] env: ext4: add support of command env erase   Patrick Delaunay
  • [RESEND PATCH 10/10] test: sandbox: add test for erase command   Patrick Delaunay
    • [RESEND PATCH 10/10] test: sandbox: add test for erase command   Simon Glass
    • [RESEND PATCH 10/10] test: sandbox: add test for erase command   Stephen Warren
• [RESEND PATCH 01/10] env: add absolute path at CONFIG_ENV_EXT4_FILE   Patrick Delaunay
• [PATCH V3] ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board   Patrick DELAUNAY
• [PATCH v2] mx6slevk: Convert to DM_ETH   Pedro Jardim
  • [PATCH v2] mx6slevk: Convert to DM_ETH   Fabio Estevam
• [U-Boot] Please pull ARC changes for v2020.04-rc2   Alexey Brodkin
  • [U-Boot] Please pull ARC changes for v2020.04-rc2   Tom Rini
• [PATCH 0/2] moveconfig fixes   Markus Klotzbuecher
  • [PATCH 1/2] moveconfig: replace unsafe eval with asteval   Markus Klotzbuecher
    • [PATCH 1/2] moveconfig: replace unsafe eval with asteval   Heinrich Schuchardt
    • [PATCH 1/2] moveconfig: replace unsafe eval with asteval   Tom Rini
  • [PATCH 2/2] moveconfig: convert ps.stderr to string   Markus Klotzbuecher
    • [PATCH 2/2] moveconfig: convert ps.stderr to string   Simon Glass
    • [PATCH 2/2] moveconfig: convert ps.stderr to string   Tom Rini
• [PATCH] travis: Switch over to using LLVM-10   Tom Rini
• [PATCH] ARM: uniphier: add sdscript, sdboot, sdupdate environment variables   Masahiro Yamada
  • [PATCH] ARM: uniphier: add sdscript, sdboot, sdupdate environment variables   Masahiro Yamada
• [PATCH v3] mips: cmd: go: Flush cache before jumping to app/image   Stefan Roese
• [PATCH] ram: rockchip: Fix Kconfig dependency for RAM_ROCKCHIP_DEBUG   Michal Simek
  • [PATCH] ram: rockchip: Fix Kconfig dependency for RAM_ROCKCHIP_DEBUG   Tom Rini
• [Uboot-stm32] [PATCH 1/9] ARM: dts: stm32mp1: DT alignment with kernel v5.4   Patrice CHOTARD
• [Uboot-stm32] [PATCH 3/9] ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7   Patrice CHOTARD
• [Uboot-stm32] [PATCH 4/9] ARM: dts: stm32mp1: move FDCAN to PLL4_R   Patrice CHOTARD
• [Uboot-stm32] [PATCH 5/9] ARM: dts: stm32mp1: correct ddr node   Patrice CHOTARD
• [Uboot-stm32] [PATCH 6/9] ARM: dts: stm32m1: add reg for pll nodes   Patrice CHOTARD
• [Uboot-stm32] [PATCH 7/9] board: stm32mp1: update readme   Patrice CHOTARD
• [PATCH 2/9] stm32mp1: pwr: use the last binding for pwr   Patrice CHOTARD
  • [PATCH 2/9] stm32mp1: pwr: use the last binding for pwr   Patrick DELAUNAY
• [PATCH] gadget: f_thor: add missing line breaks for pr_err()   Seung-Woo Kim
• [PATCH 0/7] ESM support for TI K3 SoCs   Tero Kristo
  • [PATCH 1/7] power: pmic: tps65941: Add support for probing the child devices   Tero Kristo
  • [PATCH 2/7] misc: k3_esm: Add support for Texas Instruments K3 ESM driver   Tero Kristo
  • [PATCH 3/7] misc: pmic_esm: Add support for PMIC ESM driver   Tero Kristo
  • [PATCH 4/7] arm: dts: k3-k721e: Add Main domain ESM support   Tero Kristo
    • [PATCH 4/7] arm: dts: k3-k721e: Add Main domain ESM support   Lokesh Vutla
      • [PATCH 4/7] arm: dts: k3-k721e: Add Main domain ESM support   Tero Kristo
  • [PATCH 5/7] arm: dts: k3-j721e: Add ESM PMIC support for tps659413 based board   Tero Kristo
  • [PATCH 6/7] arm: mach-k3: j721e_init: initialize ESM support   Tero Kristo
    • [PATCH 6/7] arm: mach-k3: j721e_init: initialize ESM support   Lokesh Vutla
      • [PATCH 6/7] arm: mach-k3: j721e_init: initialize ESM support   Tero Kristo
  • [PATCH 7/7] configs: j721e_evm_r5_defconfig: Enable ESM modules   Tero Kristo
• [PATCH v3] mx6slevk: Convert to DM_ETH   Pedro Jardim
  • [PATCH v3] mx6slevk: Convert to DM_ETH   Fabio Estevam
• [PATCH 9/9] stm32mp1: support of STM32MP15x Rev.Z   Patrice CHOTARD
  • [PATCH 9/9] stm32mp1: support of STM32MP15x Rev.Z   Patrick DELAUNAY
• [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Jens Rehsack
  • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Tom Rini
    • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Jens Rehsack
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Tom Rini
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Michal Simek
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Jens Rehsack
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Michal Simek
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Tom Rini
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Jens Rehsack
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Tom Rini
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Jens Rehsack
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Tom Rini
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Jens Rehsack
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Michal Simek
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Fabio Estevam
      • [PATCH] {Makefile,config.mk,a/Kconfig}: introduce SUPPLIER   Jens Rehsack
• [PATCH] am335x: evm: defconfig: disable spl tiny printf   moseschristopherb at gmail.com
  • [PATCH] am335x: evm: defconfig: disable spl tiny printf   Lokesh Vutla
    • [PATCH] am335x: evm: defconfig: disable spl tiny printf   Vignesh Raghavendra
• [PATCH] arm: dts: sort armada alphabetically   Josip Kelecic
• [PATCH] arm: xilinx: Fill DEVICE_TREE directly in Makefiles   Michal Simek
  • [PATCH] arm: xilinx: Fill DEVICE_TREE directly in Makefiles   Michal Simek
• [ANN] U-Boot v2020.04-rc2 released   Tom Rini
• [PATCH v2] mx6sabreauto: Convert to DM_ETH   Pedro Jardim
  • [PATCH v2] mx6sabreauto: Convert to DM_ETH   Fabio Estevam
• [PATCH] ARM: bootm: take into account gd->ram_top   Patrick Delaunay
  • [PATCH] ARM: bootm: take into account gd->ram_top   Simon Glass
    • [PATCH] ARM: bootm: take into account gd->ram_top   Patrick DELAUNAY
• [PATCH] dm: core: Move "/chosen" and "/firmware" node scan   Patrick Delaunay
• [PATCH] net: eth-uclass: Do not return error when no MAC is found   Fabio Estevam
• [PATCH v2] dm: core: Move "/chosen" and "/firmware" node scan   Patrick Delaunay
  • [PATCH v2] dm: core: Move "/chosen" and "/firmware" node scan   Michal Simek
  • [PATCH v2] dm: core: Move "/chosen" and "/firmware" node scan   Simon Glass
    • [PATCH v2] dm: core: Move "/chosen" and "/firmware" node scan   Patrick DELAUNAY
• [PATCH] i2c: designware_i2c: Correct the selection of speed mode   Simon Glass
  • [PATCH] i2c: designware_i2c: Correct the selection of speed mode   Heiko Schocher
  • [PATCH] i2c: designware_i2c: Correct the selection of speed mode   Heiko Schocher
• sandbox: CONFIG_SYS_RELOC_GD_ENV_ADDR?   AKASHI Takahiro
  • sandbox: CONFIG_SYS_RELOC_GD_ENV_ADDR?   Simon Glass
    • sandbox: CONFIG_SYS_RELOC_GD_ENV_ADDR?   Tom Rini
    • sandbox: CONFIG_SYS_RELOC_GD_ENV_ADDR?   AKASHI Takahiro
      • sandbox: CONFIG_SYS_RELOC_GD_ENV_ADDR?   Simon Glass
• [PATCH] arch: arm: Fix SZ_64K undeclared compilation error   Wasim Khan
  • [PATCH] arch: arm: Fix SZ_64K undeclared compilation error   Bharat Kumar Reddy
    • [PATCH] arch: arm: Fix SZ_64K undeclared compilation error   Priyanka Jain (OSS)
      • [PATCH] arch: arm: Fix SZ_64K undeclared compilation error   Tom Rini
  • [PATCH] arch: arm: Fix SZ_64K undeclared compilation error   Tom Rini
• [PATCH 0/3] Program GIC LPI configuration table   Wasim Khan
  • [PATCH 1/3] board: fsl: lx2160a: Program GIC LPI configuration table   Wasim Khan
  • [PATCH 2/3] configs: lx2160a: Enable GIC_V3_ITS config   Wasim Khan
  • [PATCH 3/3] board: fsl: lx2160a: Add GIC LPI memory reserve fixup   Wasim Khan
• [PATCH v2 00/11] mmc: sdhci: code clean-up and fix cache coherency problem   Masahiro Yamada
  • [PATCH v2 02/11] dma-mapping: fix the prototype of dma_unmap_single()   Masahiro Yamada
  • [PATCH v2 03/11] dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>   Masahiro Yamada
    • [PATCH v2 03/11] dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>   Masahiro Yamada
  • [PATCH v2 04/11] dma-mapping: add <asm/dma-mapping.h> for all architectures   Masahiro Yamada
  • [PATCH v2 05/11] mmc: sdhci: put the aligned buffer pointer to struct sdhci_host   Masahiro Yamada
  • [PATCH v2 06/11] mmc: sdhci: reduce code duplication for aligned buffer   Masahiro Yamada
  • [PATCH v2 07/11] mmc: sdhci: use lower_32_bit2() and upper_32_bits() for setting adma_addr   Masahiro Yamada
  • [PATCH v2 08/11] mmc: sdhci: remove unneeded casts   Masahiro Yamada
  • [PATCH v2 09/11] mmc: add mmc_get_dma_dir() helper   Masahiro Yamada
  • [PATCH v2 10/11] mmc: sdhci: use dma_map_single() instead of flush_cache() before DMA   Masahiro Yamada
  • [PATCH v2 11/11] mmc: sdhci: fix missing cache invalidation after reading by DMA   Masahiro Yamada
• [PATCH v2 01/11] dma-mapping: fix the prototype of dma_map_single()   Masahiro Yamada
• [PATCH 1/1] power: mfd: k3_avs: update am65xx MPU_VDD voltage values   Tero Kristo
  • [PATCH 1/1] power: mfd: k3_avs: update am65xx MPU_VDD voltage values   Lokesh Vutla
• [PATCH v3 00/11] mmc: sdhci: code clean-up and fix cache coherency problem   Masahiro Yamada
  • [PATCH v3 04/11] dma-mapping: add <asm/dma-mapping.h> for all architectures   Masahiro Yamada
  • [PATCH v3 05/11] mmc: sdhci: put the aligned buffer pointer to struct sdhci_host   Masahiro Yamada
    • [PATCH v3 05/11] mmc: sdhci: put the aligned buffer pointer to struct sdhci_host   Jaehoon Chung
  • [PATCH v3 08/11] mmc: sdhci: remove unneeded casts   Masahiro Yamada
    • [PATCH v3 08/11] mmc: sdhci: remove unneeded casts   Jaehoon Chung
  • [PATCH v3 09/11] mmc: add mmc_get_dma_dir() helper   Masahiro Yamada
    • [PATCH v3 09/11] mmc: add mmc_get_dma_dir() helper   Jaehoon Chung
  • [PATCH v3 10/11] mmc: sdhci: use dma_map_single() instead of flush_cache() before DMA   Masahiro Yamada
  • [PATCH v3 11/11] mmc: sdhci: fix missing cache invalidation after reading by DMA   Masahiro Yamada
• [PATCH v3 01/11] dma-mapping: fix the prototype of dma_map_single()   Masahiro Yamada
• [PATCH v3 02/11] dma-mapping: fix the prototype of dma_unmap_single()   Masahiro Yamada
• [PATCH v3 03/11] dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>   Masahiro Yamada
• [PATCH v3 06/11] mmc: sdhci: reduce code duplication for aligned buffer   Masahiro Yamada
  • [PATCH v3 06/11] mmc: sdhci: reduce code duplication for aligned buffer   Jaehoon Chung
• [PATCH v3 07/11] mmc: sdhci: use lower_32_bit2() and upper_32_bits() for setting adma_addr   Masahiro Yamada
  • [PATCH v3 07/11] mmc: sdhci: use lower_32_bit2() and upper_32_bits() for setting adma_addr   Jaehoon Chung
• [Uboot-stm32] [PATCH 1/4] board: stm32mp1: board: add include for dfu   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/4] board: stm32mp1: change dfu function to static   Patrice CHOTARD
• [PATCH 3/4] pinctrl: stmfx: update the result type of dm_i2c_reg_read   Patrice CHOTARD
  • [PATCH 3/4] pinctrl: stmfx: update the result type of dm_i2c_reg_read   Patrick DELAUNAY
• [PATCH 4/4] clk: stm32mp1: solve type issue in stm32mp1_lse_enable and stm32mp1_clktree   Patrice CHOTARD
  • [PATCH 4/4] clk: stm32mp1: solve type issue in stm32mp1_lse_enable and stm32mp1_clktree   Patrick DELAUNAY
• [PATCH] configs: versal: Add CONFIG_DISTRO_DEFAULTS to versal defconfig   Michal Simek
• [PATCHv2 0/7] ESM support for TI K3 SoCs   Tero Kristo
  • [PATCHv2 1/7] power: pmic: tps65941: Add support for probing the child devices   Tero Kristo
  • [PATCHv2 2/7] misc: k3_esm: Add support for Texas Instruments K3 ESM driver   Tero Kristo
    • [PATCHv2 2/7] misc: k3_esm: Add support for Texas Instruments K3 ESM driver   Tom Rini
  • [PATCHv2 3/7] misc: pmic_esm: Add support for PMIC ESM driver   Tero Kristo
  • [PATCHv2 4/7] arm: dts: k3-k721e: Add Main domain ESM support   Tero Kristo
  • [PATCHv2 5/7] arm: dts: k3-j721e: Add ESM PMIC support for tps659413 based board   Tero Kristo
  • [PATCHv2 6/7] board: ti: j721e: initialize ESM support   Tero Kristo
  • [PATCHv2 7/7] configs: j721e_evm_r5_defconfig: Enable ESM modules   Tero Kristo
  • [PATCHv2 0/7] ESM support for TI K3 SoCs   Lokesh Vutla
• [GIT PULL] TI changes for v2020.04-rc3   Lokesh Vutla
  • [GIT PULL] TI changes for v2020.04-rc3   Tom Rini
• [PATCH 0/2] Fix Ethernet boot in am437x-evm   Lokesh Vutla
• [PULL] Pull request: u-boot-stm32 u-boot-stm32-20200214   Patrick DELAUNAY
  • [PULL] Pull request: u-boot-stm32 u-boot-stm32-20200214   Tom Rini
• [PATCH] arm64: ls1012a: enable DM support for sata   Peng Ma
• [PATCH 1/9] ARM: dts: stm32mp1: DT alignment with kernel v5.4   Patrick DELAUNAY
• [PATCH 3/9] ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7   Patrick DELAUNAY
• [PATCH 5/9] ARM: dts: stm32mp1: correct ddr node   Patrick DELAUNAY
• [PATCH 6/9] ARM: dts: stm32m1: add reg for pll nodes   Patrick DELAUNAY
• [PATCH 7/9] board: stm32mp1: update readme   Patrick DELAUNAY
• [PATCH 1/4] board: stm32mp1: board: add include for dfu   Patrick DELAUNAY
• [PATCH 2/4] board: stm32mp1: change dfu function to static   Patrick DELAUNAY
• [PATCH] tools: mkimage: fix STM32 image format for big endian hosts   Patrick DELAUNAY
• [PATCH] sandbox: also restore terminal settings when killed by SIGINT   Rasmus Villemoes
  • [PATCH] sandbox: also restore terminal settings when killed by SIGINT   Simon Glass
• [PATCH 1/3] ARM: uniphier: move NAND reset assertion to U-Boot proper from SPL   Masahiro Yamada
  • [PATCH 2/3] ARM: uniphier: remove workaround for the NAND write protect   Masahiro Yamada
    • [PATCH 2/3] ARM: uniphier: remove workaround for the NAND write protect   Masahiro Yamada
  • [PATCH 3/3] ARM: uniphier: detect the base of micro support card at run-time   Masahiro Yamada
    • [PATCH 3/3] ARM: uniphier: detect the base of micro support card at run-time   Masahiro Yamada
  • [PATCH 1/3] ARM: uniphier: move NAND reset assertion to U-Boot proper from SPL   Masahiro Yamada
• [PATCH] misc: k3_avs: Fix possible NULL pointer deference   Vignesh Raghavendra
  • [PATCH] misc: k3_avs: Fix possible NULL pointer deference   Keerthy
  • [PATCH] misc: k3_avs: Fix possible NULL pointer deference   Lokesh Vutla
• [PATCH] usb: dwc3: Check that the request is valid in dwc3_gadget_giveback()   Vignesh Raghavendra
  • [PATCH] usb: dwc3: Check that the request is valid in dwc3_gadget_giveback()   Marek Vasut
    • [PATCH] usb: dwc3: Check that the request is valid in dwc3_gadget_giveback()   Vignesh Raghavendra
• [PATCH v6 0/7] rsa: extend rsa_verify() for UEFI secure boot   Tom Rini
  • [PATCH v6 0/7] rsa: extend rsa_verify() for UEFI secure boot   AKASHI Takahiro
    • [PATCH v6 0/7] rsa: extend rsa_verify() for UEFI secure boot   Tom Rini
• [PATCH v1 1/2] ARM: dts: imx8mm-verdin: dm-spl for pinctrl_usdhc1 node   Igor Opaniuk
  • [PATCH v1 2/2] ARM: dts: imx8mm-verdin: drop rgmii_rxc_dly/txc_dly   Igor Opaniuk
    • [PATCH v1 2/2] ARM: dts: imx8mm-verdin: drop rgmii_rxc_dly/txc_dly   Peng Fan
    • [PATCH v1 2/2] ARM: dts: imx8mm-verdin: drop rgmii_rxc_dly/txc_dly   Oleksandr Suvorov
  • [PATCH v1 1/2] ARM: dts: imx8mm-verdin: dm-spl for pinctrl_usdhc1 node   Peng Fan
  • [PATCH v1 1/2] ARM: dts: imx8mm-verdin: dm-spl for pinctrl_usdhc1 node   Oleksandr Suvorov
• RPI4: fail too boot with an initrd   LABBE Corentin
  • RPI4: fail too boot with an initrd   James Morse
    • RPI4: fail too boot with an initrd   LABBE Corentin
      • RPI4: fail too boot with an initrd   Matthias Brugger
      • RPI4: fail too boot with an initrd   LABBE Corentin
      • RPI4: fail too boot with an initrd   Matthias Brugger
      • RPI4: fail too boot with an initrd   LABBE Corentin
      • RPI4: fail too boot with an initrd   Matthias Brugger
      • RPI4: fail too boot with an initrd   Jaehoon Chung
• [PATCH v3 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Patrick DELAUNAY
  • [PATCH v3 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Marek Vasut
• [U-Boot] [PATCH] defconfig: k2x_hs: Remove DTB_RESELECT to fix DHCP issue   Andrew F. Davis
  • [U-Boot] [PATCH] defconfig: k2x_hs: Remove DTB_RESELECT to fix DHCP issue   Lokesh Vutla
• [PATCH v1 0/2] Add roc-rk3328-cc support   Loic Devulder
  • [PATCH v1 1/2] rockchip: rk3328: dts: add L2 cache entry   Loic Devulder
    • Re: [PATCH v1 1/2] rockchip: rk3328: dts: add L2 cache entry【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
  • [PATCH v1 2/2] rockchip: rk3328: add roc-rk3328-cc support   Loic Devulder
    • [PATCH v1 2/2] rockchip: rk3328: add roc-rk3328-cc support   Kever Yang
  • [PATCH v1 0/2] Add roc-rk3328-cc support   Peter Geis
• [PATCH 1/3] clk: imx: imx8mn: add enet clk   Alifer Moraes
  • [PATCH 2/3] clk: imx: imx8mn: add set_parent callback   Alifer Moraes
  • [PATCH 3/3] imx: imx8mn-evk: enable ethernet   Alifer Moraes
  • [PATCH 1/3] clk: imx: imx8mn: add enet clk   Lukasz Majewski
    • [PATCH 1/3] clk: imx: imx8mn: add enet clk   Alifer Moraes
      • [PATCH 1/3] clk: imx: imx8mn: add enet clk   Lukasz Majewski
• [PATCH] arm: dts: imx8mq-evk: add phy-reset-gpios for fec1   Alifer Moraes
  • [PATCH] arm: dts: imx8mq-evk: add phy-reset-gpios for fec1   Michael Nazzareno Trimarchi
    • [PATCH] arm: dts: imx8mq-evk: add phy-reset-gpios for fec1   Michael Nazzareno Trimarchi
• [PATCH] image.h: Change android_image_get_dtb* to use uint and not u32   Tom Rini
  • [PATCH] image.h: Change android_image_get_dtb* to use uint and not u32   Eugeniu Rosca
    • [PATCH] image.h: Change android_image_get_dtb* to use uint and not u32   Tom Rini
      • [PATCH] image.h: Change android_image_get_dtb* to use uint and not u32   Eugeniu Rosca
      • [PATCH] image.h: Change android_image_get_dtb* to use uint and not u32   Masahiro Yamada
      • [PATCH] image.h: Change android_image_get_dtb* to use uint and not u32   Eugeniu Rosca
      • [PATCH] image.h: Change android_image_get_dtb* to use uint and not u32   Tom Rini
• [PATCH v2] arm: dts: imx8mq-evk: add phy-reset-gpios for fec1   Alifer Moraes
• [PATCH 1/1] efi_loader: EFI_RNG_PROTOCOL   Heinrich Schuchardt
  • [PATCH 1/1] efi_loader: EFI_RNG_PROTOCOL   Sughosh Ganu
    • [PATCH 1/1] efi_loader: EFI_RNG_PROTOCOL   Heinrich Schuchardt
      • [PATCH 1/1] efi_loader: EFI_RNG_PROTOCOL   Sughosh Ganu
• NanoPi-M4 boot issue   Trevor Woerner
  • NanoPi-M4 boot issue   Trevor Woerner
• [PATCH v3 0/6] log: syslog logging driver   Heinrich Schuchardt
  • [PATCH v3 1/6] log: correct CONFIG_LOG_TEST prerequisites   Heinrich Schuchardt
  • [PATCH v3 2/6] log: syslog driver   Heinrich Schuchardt
    • [PATCH v3 2/6] log: syslog driver   Simon Glass
  • [PATCH v3 3/6] log: output for CONFIG_LOG=n   Heinrich Schuchardt
  • [PATCH v3 4/6] test: log functions with CONFIG_LOG=n   Heinrich Schuchardt
    • [PATCH v3 4/6] test: log functions with CONFIG_LOG=n   Simon Glass
  • [PATCH v3 5/6] test: log: test syslog logging driver   Heinrich Schuchardt
    • [PATCH v3 5/6] test: log: test syslog logging driver   Simon Glass
  • [PATCH v3 6/6] configs: sandbox: enable LOG_SYSLOG   Heinrich Schuchardt
    • [PATCH v3 6/6] configs: sandbox: enable LOG_SYSLOG   Simon Glass
• [PATCH] power-domain: fix hang in endless loop on i.MX8   Anatolij Gustschin
  • [PATCH] power-domain: fix hang in endless loop on i.MX8   Simon Glass
    • [PATCH] power-domain: fix hang in endless loop on i.MX8   Anatolij Gustschin
      • [PATCH] power-domain: fix hang in endless loop on i.MX8   Peng Fan
  • [PATCH] power-domain: fix hang in endless loop on i.MX8   Lokesh Vutla
  • [PATCH] power-domain: fix hang in endless loop on i.MX8   Oliver Graute
    • [PATCH] power-domain: fix hang in endless loop on i.MX8   Neil Armstrong
• [PATCH] rtc: m41t62: add compatible for m41st87   Marek Vasut
  • [PATCH] rtc: m41t62: add compatible for m41st87   Stefan Roese
• [PATCH 1/2] ARM: socfpga: Permit overriding the default timer frequency   Marek Vasut
  • [PATCH 2/2] ARM: socfpga: Add missing Denali NAND config options   Marek Vasut
  • [PATCH 1/2] ARM: socfpga: Permit overriding the default timer frequency   Simon Goldschmidt
    • [PATCH 1/2] ARM: socfpga: Permit overriding the default timer frequency   Marek Vasut
      • [PATCH 1/2] ARM: socfpga: Permit overriding the default timer frequency   Simon Goldschmidt
• sunxi_nand_spl reading zeros on NextThing C.H.I.P.   Yevhenii Hrabliuk
• [PATCH 1/1] clk: meson-g12a: missing break   Heinrich Schuchardt
  • [PATCH 1/1] clk: meson-g12a: missing break   Lukasz Majewski
  • [PATCH 1/1] clk: meson-g12a: missing break   Neil Armstrong
• [PATCH 1/1] x86: remove dead code in intel_clk_get_rate()   Heinrich Schuchardt
  • [PATCH 1/1] x86: remove dead code in intel_clk_get_rate()   Lukasz Majewski
  • [PATCH 1/1] x86: remove dead code in intel_clk_get_rate()   Simon Glass
  • [PATCH 1/1] x86: remove dead code in intel_clk_get_rate()   Bin Meng
• [PATCH 1/1] clk: ICS8N3QV01 remove superfluous code   Heinrich Schuchardt
  • [PATCH 1/1] clk: ICS8N3QV01 remove superfluous code   Lukasz Majewski
• [PATCH 1/1] dm: core: remove redundant if statement   Heinrich Schuchardt
  • [PATCH 1/1] dm: core: remove redundant if statement   Simon Glass
• [PATCH 1/1] dm: core: remove redundant assignment   Heinrich Schuchardt
  • [PATCH 1/1] dm: core: remove redundant assignment   Simon Glass
• [PATCH 1/1] arm: mvebu: drivers/ddr: remove redundant assignment   Heinrich Schuchardt
  • [PATCH 1/1] arm: mvebu: drivers/ddr: remove redundant assignment   Stefan Roese
• [PATCH 1/1] stm32mp1: rng: remove superfluous assignment   Heinrich Schuchardt
  • [PATCH 1/1] stm32mp1: rng: remove superfluous assignment   Sughosh Ganu
  • [PATCH 1/1] stm32mp1: rng: remove superfluous assignment   Patrick DELAUNAY
• [PATCH] Revert "sunxi: psci: avoid error address-of-packed-member"   Tomasz Duszynski
• [PATCH v2 00/13] Add DM/DTS support for omap video driver   Dario Binacchi
  • [PATCH v2 01/13] video: omap: use BIT() and GENMASK() macros   Dario Binacchi
  • [PATCH v2 02/13] video: omap: add missing bitfield masks   Dario Binacchi
  • [PATCH v2 03/13] video: omap: fix coding style on use of spaces   Dario Binacchi
  • [PATCH v2 04/13] video: omap: fix bitfields order   Dario Binacchi
  • [PATCH v2 05/13] video: omap: rename LCD controller registers   Dario Binacchi
  • [PATCH v2 06/13] video: omap: fix debug message   Dario Binacchi
  • [PATCH v2 07/13] video: omap: add loop exit conditions to the dpll setup   Dario Binacchi
  • [PATCH v2 08/13] video: omap: create two routines to set the pixel clock rate   Dario Binacchi
  • [PATCH v2 09/13] video: omap: add support for DM/DTS   Dario Binacchi
  • [PATCH v2 10/13] arm: dts: am335x: add 'u-boot, dm-pre-reloc' to panel   Dario Binacchi
    • [PATCH v2 10/13] arm: dts: am335x: add 'u-boot, dm-pre-reloc' to panel   Tom Rini
    • [PATCH v2 10/13] arm: dts: am335x: add 'u-boot,dm-pre-reloc' to panel   Felix Brack
      • [PATCH v2 10/13] arm: dts: am335x: add 'u-boot,dm-pre-reloc' to panel   dariobin at libero.it
  • [PATCH v2 11/13] fdt: video: omap: add framebuffer and panel bindings   Dario Binacchi
  • [PATCH v2 12/13] video: omap: fix pixel-per-line bitfield setting   Dario Binacchi
  • [PATCH v2 13/13] board: brxre1: fix building errors   Dario Binacchi
  • [PATCH v2 00/13] Add DM/DTS support for omap video driver   Lokesh Vutla
• [U-Boot] [RFC] cmd: add bootslot command to select/boot slot based on boot counts   Wolfgang Denk
• [PATCH v4 0/6] log: syslog logging driver   Heinrich Schuchardt
  • [PATCH v4 1/6] log: correct CONFIG_LOG_TEST prerequisites   Heinrich Schuchardt
  • [PATCH v4 2/6] log: syslog driver   Heinrich Schuchardt
  • [PATCH v4 3/6] log: output for CONFIG_LOG=n   Heinrich Schuchardt
  • [PATCH v4 4/6] test: log functions with CONFIG_LOG=n   Heinrich Schuchardt
  • [PATCH v4 5/6] test: log: test syslog logging driver   Heinrich Schuchardt
  • [PATCH v4 6/6] configs: sandbox: enable LOG_SYSLOG   Heinrich Schuchardt
• Which parameters are shared by kernel and u-boot?   JH
• [PATCH] arm: dts: k3-am654-base-board: Enable I2C nodes   Vignesh Raghavendra
  • [PATCH] arm: dts: k3-am654-base-board: Enable I2C nodes   Lokesh Vutla
• [PATCH v2] power-domain: fix hang in endless loop on i.MX8   Anatolij Gustschin
  • [PATCH v2] power-domain: fix hang in endless loop on i.MX8   Fabio Estevam
    • [PATCH v2] power-domain: fix hang in endless loop on i.MX8   Fabio Estevam
• [PATCH] Revert "dm: core: device: switch off power domain after device removal"   Neil Armstrong
  • [PATCH] Revert "dm: core: device: switch off power domain after device removal"   Anatolij Gustschin
    • [PATCH] Revert "dm: core: device: switch off power domain after device removal"   Neil Armstrong
• [PATCH] ARM: zynq: Rename defconfig to be align with ZynqMP and Versal   Michal Simek
• [PATCH] dt-bindings: net: dp83867: Remove binding doc from U-Boot tree   Michal Simek
  • [PATCH] dt-bindings: net: dp83867: Remove binding doc from U-Boot tree   Grygorii Strashko
• imx8m: composite clock wrong clock parent ?   Sébastien Szymanski
  • imx8m: composite clock wrong clock parent ?   Fabio Estevam
  • imx8m: composite clock wrong clock parent ?   Peng Fan
• [PATCH] image.h: use uint32_t instead of u32 in android_image_get_dtb*   Eugeniu Rosca
  • [PATCH] image.h: use uint32_t instead of u32 in android_image_get_dtb*   Masahiro Yamada
  • [PATCH] image.h: use uint32_t instead of u32 in android_image_get_dtb*   Sam Protsenko
• [PATCH] arm64: zynqmp: Enable cache command for mini mtest configuration   Michal Simek
• [PATCH 1/2] dm: core: Add a flag for power domain control on device removal   Anatolij Gustschin
  • [PATCH 2/2] video: meson: keep power domain up after booting   Anatolij Gustschin
    • [PATCH 2/2] video: meson: keep power domain up after booting   Neil Armstrong
  • [PATCH 1/2] dm: core: Add a flag for power domain control on device removal   Neil Armstrong
  • [PATCH 1/2] dm: core: Add a flag for power domain control on device removal   Simon Glass
    • [PATCH 1/2] dm: core: Add a flag for power domain control on device removal   Anatolij Gustschin
      • [PATCH 1/2] dm: core: Add a flag for power domain control on device removal   Simon Glass
• Fwd: use invd instead of wbinvd in real mode start code   Andy Shevchenko
  • use invd instead of wbinvd in real mode start code   Andy Shevchenko
    • use invd instead of wbinvd in real mode start code   Andy Shevchenko
      • use invd instead of wbinvd in real mode start code   Bin Meng
      • use invd instead of wbinvd in real mode start code   Andy Shevchenko
      • use invd instead of wbinvd in real mode start code   Bin Meng
      • use invd instead of wbinvd in real mode start code   Andy Shevchenko
      • use invd instead of wbinvd in real mode start code   Wolfgang Denk
      • use invd instead of wbinvd in real mode start code   Tom Rini
      • use invd instead of wbinvd in real mode start code   Andy Shevchenko
      • use invd instead of wbinvd in real mode start code   Andy Shevchenko
      • use invd instead of wbinvd in real mode start code   Tom Rini
      • use invd instead of wbinvd in real mode start code   Wolfgang Denk
      • use invd instead of wbinvd in real mode start code   Heiko Schocher
      • use invd instead of wbinvd in real mode start code   Andy Shevchenko
      • use invd instead of wbinvd in real mode start code   Heiko Schocher
      • use invd instead of wbinvd in real mode start code   Andy Shevchenko
      • use invd instead of wbinvd in real mode start code   Tom Rini
      • use invd instead of wbinvd in real mode start code   Andy Shevchenko
      • use invd instead of wbinvd in real mode start code   Wolfgang Denk
      • use invd instead of wbinvd in real mode start code   Tom Rini
      • use invd instead of wbinvd in real mode start code   Heiko Schocher
      • use invd instead of wbinvd in real mode start code   Tom Rini
• [PATCH 1/1] dm: pinctrl: include linux/errno.h in pinctrl.h   Sébastien Szymanski
  • [PATCH 1/1] dm: pinctrl: include linux/errno.h in pinctrl.h   Simon Glass
• [PATCH v1] Revert "x86: use invd instead of wbinvd in real mode start code"   Andy Shevchenko
  • [PATCH v1] Revert "x86: use invd instead of wbinvd in real mode start code"   Bin Meng
    • [PATCH v1] Revert "x86: use invd instead of wbinvd in real mode start code"   Andy Shevchenko
      • [PATCH v1] Revert "x86: use invd instead of wbinvd in real mode start code"   Bin Meng
  • [PATCH v1] Revert "x86: use invd instead of wbinvd in real mode start code"   Masahiro Yamada
    • [PATCH v1] Revert "x86: use invd instead of wbinvd in real mode start code"   Andy Shevchenko
• [PATCH V2 1/2] ARM: socfpga: Permit overriding the default timer frequency   Marek Vasut
  • [PATCH V2 2/2] ARM: socfpga: Add missing Denali NAND config options   Marek Vasut
    • [PATCH V2 2/2] ARM: socfpga: Add missing Denali NAND config options   Tan, Ley Foon
  • [PATCH V2 1/2] ARM: socfpga: Permit overriding the default timer frequency   Simon Goldschmidt
  • [PATCH V2 1/2] ARM: socfpga: Permit overriding the default timer frequency   Tan, Ley Foon
• [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Marek Vasut
  • [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Wolfgang Denk
    • [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Marek Vasut
      • [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Holger Brunck
      • [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Marek Vasut
      • [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Holger Brunck
      • [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Marek Vasut
      • [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Holger Brunck
  • [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Tan, Ley Foon
    • [PATCH] ARM: socfpga: Add initial support for the ABB SECU board   Marek Vasut
• [PATCH] imx8qxp_mek: Fix the console command line string   Fabio Estevam
• [PATCH] arm: mvebu: clearfog: add scsi target to distro-boot   Josua Mayer
  • [PATCH] arm: mvebu: clearfog: add scsi target to distro-boot   Stefan Roese
• [PATCH] Revert "dm: fdt: scan for devices under /firmware too"   Thirupathaiah Annapureddy
  • [PATCH] Revert "dm: fdt: scan for devices under /firmware too"   Michal Simek
• [PATCH v2 0/3] Support SDMA mode on RPI4 target - 32bit   Jaehoon Chung
  • [PATCH v2 1/3] mmc: sdhci: use phys2bus macro when dma address is accessed   Jaehoon Chung
    • [PATCH v2 1/3] mmc: sdhci: use phys2bus macro when dma address is accessed   Minkyu Kang
  • [PATCH v2 2/3] mmc: sdhci: not return error when SDMA is not supported   Jaehoon Chung
    • [PATCH v2 2/3] mmc: sdhci: not return error when SDMA is not supported   Minkyu Kang
  • [PATCH v2 3/3] configs: rpi_4_32b_defconfig: enable SDHCI_SDMA config   Jaehoon Chung
    • [PATCH v2 3/3] configs: rpi_4_32b_defconfig: enable SDHCI_SDMA config   Minkyu Kang
• [RFC] fixdep: faster CONFIG_search   Tom Rini
• [PATCH] kbuild: fixdep: Resync this with v4.17   Tom Rini
  • [PATCH] kbuild: fixdep: Resync this with v4.17   Masahiro Yamada
    • [PATCH] kbuild: fixdep: Resync this with v4.17   Masahiro Yamada
      • [PATCH] kbuild: fixdep: Resync this with v4.17   Tom Rini
• [PATCH v2 00/10] net: ti: icssg: Add prueth support   Keerthy
  • [PATCH v2 01/10] net: eth-uclass: eth_get_dev based on SEQ_ALIAS instead of probe order   Keerthy
    • [PATCH v2 01/10] net: eth-uclass: eth_get_dev based on SEQ_ALIAS instead of probe order   Simon Glass
  • [PATCH v2 02/10] soc: ti: pruss: add a misc driver for PRUSS in TI SoCs   Keerthy
  • [PATCH v2 03/10] remoteproc: pruss: add PRU remoteproc driver   Keerthy
  • [PATCH v2 04/10] net: ti: icssg-prueth: Add ICSSG ethernet driver   Keerthy
  • [PATCH v2 05/10] arm: dts: k3-am65-main: Add msmc_ram node   Keerthy
  • [PATCH v2 06/10] arm: dts: k3-am654-base-board-u-boot: Add icssg specific msmc_ram carveout nodes   Keerthy
  • [PATCH v2 07/10] arm: dts: k3-am65-main: Add scm_conf node   Keerthy
  • [PATCH v2 08/10] arm: dts: k3-am65-main: Add pruss nodes for ICSSG2   Keerthy
  • [PATCH v2 09/10] arm64: dts: ti: am654-base-board: add ICSSG2 Ethernet support   Keerthy
  • [PATCH v2 10/10] configs: am65x_evm_a53_defconfig: Enable CONFIG_TI_AM64_ICSSG_PRUETH   Keerthy
  • [PATCH v2 00/10] net: ti: icssg: Add prueth support   Keerthy
• u-boot saveenv corrupted other MTD parttions   JH
  • u-boot saveenv corrupted other MTD parttions   Andy Pont
• [PATCH v6] Add support for SoM "VoCore2".   Mauro Condarelli
  • [PATCH v6] Add support for SoM "VoCore2".   Stefan Roese
• [PATCH v4 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Patrick Delaunay
  • [PATCH v4 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Marek Vasut
    • [PATCH v4 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Simon Goldschmidt
• [PATCH v4 1/5] dm: clk: add stub when CONFIG_CLK is desactivated   Patrick Delaunay
• [PATCH v4 2/5] usb: host: dwc2: add phy support   Patrick Delaunay
• [PATCH v4 3/5] usb: host: dwc2: add clk support   Patrick Delaunay
• [PATCH v4 4/5] usb: host: dwc2: force reset assert   Patrick Delaunay
• [PATCH v4 5/5] usb: host: dwc2: add trace to have clean usb start   Patrick Delaunay
• [PATCH v2 1/8] phy: generic: add error trace to detect PHY issue in uclass   Patrick Delaunay
  • [PATCH v2 2/8] usb: gadget: dwc2: change trace level for phy errors managed by uclass   Patrick Delaunay
  • [PATCH v2 3/8] board: sunxi: change trace level for phy errors managed by uclass   Patrick Delaunay
    • [PATCH v2 3/8] board: sunxi: change trace level for phy errors managed by uclass   Marek Vasut
  • [PATCH v2 4/8] usb: host: ohci: change trace level for phy errors managed by uclass   Patrick Delaunay
  • [PATCH v2 5/8] usb: host: ehci-hcd: change trace level for phy errors managed by uclass   Patrick Delaunay
  • [PATCH v2 6/8] usb: dwc3: change trace level for phy errors managed by uclass   Patrick Delaunay
    • [PATCH v2 6/8] usb: dwc3: change trace level for phy errors managed by uclass   Marek Vasut
  • [PATCH v2 7/8] ata: dwc-ahci: change trace level for phy errors managed by uclass   Patrick Delaunay
  • [PATCH v2 8/8] usb: musb-new: sunxi: change trace level for phy errors managed by uclass   Patrick Delaunay
  • [PATCH v2 1/8] phy: generic: add error trace to detect PHY issue in uclass   Marek Vasut
    • [PATCH v2 1/8] phy: generic: add error trace to detect PHY issue in uclass   Patrick DELAUNAY
• [PATCH] include/eeprom.h: fix build errors   Rasmus Villemoes
  • [PATCH] include/eeprom.h: fix build errors   Tom Rini
• [U-Boot 1/1] eth: mtk-eth: add mt7531 switch support in mediatek eth driver   Landen Chao
  • Aw: [U-Boot 1/1] eth: mtk-eth: add mt7531 switch support in mediatek eth driver   Frank Wunderlich
• [PATCH] env: make file-scope env_ptr variables static   Rasmus Villemoes
• [RFC PATCH] powerpc, qe: add DTS support for parallel I/O ports   Heiko Schocher
• [RFC PATCH] net, qe: add DM support for QE UEC ethernet   Heiko Schocher
• [PATCH v2] doc: add board documentation for stm32mp1   Patrick Delaunay
• [PATCH] fixdep: fix U-Boot own code to handle only valid symbol characters   Masahiro Yamada
  • [PATCH] fixdep: fix U-Boot own code to handle only valid symbol characters   Masahiro Yamada
    • [PATCH] fixdep: fix U-Boot own code to handle only valid symbol characters   Tom Rini
  • [PATCH] fixdep: fix U-Boot own code to handle only valid symbol characters   Masahiro Yamada
• [PATCH B] fixdep: fix U-Boot own code to handle only valid symbol characters   Masahiro Yamada
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
  • [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [PATCH 00/16] xilinx: DT sync up   Michal Simek
  • [PATCH 01/16] ARM: dts: zc702: Fix I2C bus warnings   Michal Simek
  • [PATCH 02/16] ARM: dts: zynq: replace gpio-key, wakeup with wakeup-source property   Michal Simek
  • [PATCH 03/16] arm64: zynqmp: Replace gpio-key, wakeup with wakeup source   Michal Simek
  • [PATCH 04/16] arm64: zynqmp: Update Copyright years to 2020   Michal Simek
  • [PATCH 05/16] ARM: zynq: Fix spi name node   Michal Simek
  • [PATCH 06/16] arm64: zynqmp: Remove unused zynqmp-clk.dtsi   Michal Simek
  • [PATCH 07/16] arm64: zynqmp: Sync zynqmp fpga manager with mainline   Michal Simek
  • [PATCH 08/16] arm64: zynqmp: Add 'no-1-8-v' property for ZynqMP Boards   Michal Simek
  • [PATCH 09/16] arm64: zynqmp: Remove second copy of reset-controller   Michal Simek
  • [PATCH 10/16] arm64: dts: zynqmp: Add clk cells for sdhci   Michal Simek
  • [PATCH 11/16] arm64: zynqmp: Do not duplicate flash partition label property   Michal Simek
  • [PATCH 12/16] arm64: zynqmp: Sync DP subsystem   Michal Simek
  • [PATCH 13/16] arm64: zynqmp: Fix addresses in partition definitions   Michal Simek
  • [PATCH 14/16] arm64: zynqmp: Fix GIC compatible property   Michal Simek
  • [PATCH 15/16] arm64: zynqmp: Change bus naming to axi   Michal Simek
  • [PATCH 16/16] arm64: zynqmp: Move pinctrl node under firmware node   Michal Simek
• [RFC PATCH] serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()   Wolfgang Wallner
  • [RFC PATCH] serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()   Simon Glass
  • [RFC PATCH] serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()   Bin Meng
    • [RFC PATCH] serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()   Bin Meng
      • [RFC PATCH] serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()   Bin Meng
      • Antwort: Re: [RFC PATCH] serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()   Wolfgang Wallner
• [PATCH] net: phy: dp83867: Add SGMII mode type switching   Michal Simek
• [PATCH] env: Kconfig: Adding default values for Microblaze   Michal Simek
• [PATCH] common: fix regression on block cache init   Angelo Dureghello
• [PATCH] x86: p2sb: Drop 'apl' prefix   Wolfgang Wallner
  • [PATCH] x86: p2sb: Drop 'apl' prefix   Simon Glass
  • [PATCH] x86: p2sb: Drop 'apl' prefix   Bin Meng
    • [PATCH] x86: p2sb: Drop 'apl' prefix   Bin Meng
• [PATCH v3] dm: core: Move "/chosen" and "/firmware" node scan   Patrick Delaunay
  • [PATCH v3] dm: core: Move "/chosen" and "/firmware" node scan   Simon Glass
• [PATCH] ARM: zynq: Change zc770 xm011 Nand x16 configurations   Michal Simek
• [PATCH 0/2] ARM: zynq: Start to use unified configurations   Michal Simek
  • [PATCH 1/2] Makefile: Add environment variable DEVICE_TREE to header   Michal Simek
    • [PATCH 1/2] Makefile: Add environment variable DEVICE_TREE to header   Tom Rini
    • [PATCH 1/2] Makefile: Add environment variable DEVICE_TREE to header   Simon Glass
      • [PATCH 1/2] Makefile: Add environment variable DEVICE_TREE to header   Michal Simek
  • [PATCH 2/2] ARM: zynq: Switch to single zynq configurations   Michal Simek
• [PATCH v2] ARM: zynq: Rename defconfig to be align with ZynqMP and Versal   Michal Simek
  • [PATCH v2] ARM: zynq: Rename defconfig to be align with ZynqMP and Versal   Michal Simek
• [PATCH v1 0/2] display proper CPU frequency on hifive-unleashed   Sagar Shrikant Kadam
  • [PATCH v1 1/2] fu540: prci: add request and free clock handlers   Sagar Shrikant Kadam
    • [PATCH v1 1/2] fu540: prci: add request and free clock handlers   Sean Anderson
      • [PATCH v1 1/2] fu540: prci: add request and free clock handlers   Sagar Kadam
  • [PATCH v1 2/2] cpu: clk: riscv: populate proper CPU core clk frequency   Sagar Shrikant Kadam
    • [PATCH v1 2/2] cpu: clk: riscv: populate proper CPU core clk frequency   Bin Meng
      • [PATCH v1 2/2] cpu: clk: riscv: populate proper CPU core clk frequency   Sagar Kadam
      • [PATCH v1 2/2] cpu: clk: riscv: populate proper CPU core clk frequency   Sean Anderson
      • [PATCH v1 2/2] cpu: clk: riscv: populate proper CPU core clk frequency   Sagar Kadam
• [PATCH] tools: image-host.c: remove uboot_aes.h   Philippe Reynes
  • [PATCH] tools: image-host.c: remove uboot_aes.h   Andrew F. Davis
    • [PATCH] tools: image-host.c: remove uboot_aes.h   Bajjuri, Praneeth
  • [PATCH] tools: image-host.c: remove uboot_aes.h   Tom Rini
• [PATCH] mpc83xx, abb: remove suvd3 board   Heiko Schocher
  • [PATCH] mpc83xx, abb: remove suvd3 board   Simon Glass
    • [PATCH] mpc83xx, abb: remove suvd3 board   Priyanka Jain (OSS)
• [PATCH V3 1/2] ARM: socfpga: Permit overriding the default timer frequency   Marek Vasut
  • [PATCH V3 2/2] ARM: socfpga: Add missing Denali NAND config options   Marek Vasut
• [PATCH] doc: i2c: gpio: Document deblock sequence on probe   Marek Vasut
  • [PATCH] doc: i2c: gpio: Document deblock sequence on probe   Heiko Schocher
• [PATCH 0/5] i.MXRT1020 add basic support   Giulio Benetti
  • [PATCH 1/5] clk: imx: add i.IMXRT1020 clk driver   Giulio Benetti
    • [PATCH 1/5] clk: imx: add i.IMXRT1020 clk driver   Lukasz Majewski
  • [PATCH 2/5] Add i.MXRT1020 support   Giulio Benetti
    • [PATCH 2/5] Add i.MXRT1020 support   Lukasz Majewski
  • [PATCH 3/5] ARM: dts: imxrt1020: add dtsi file   Giulio Benetti
    • [PATCH 3/5] ARM: dts: imxrt1020: add dtsi file   Lukasz Majewski
      • [PATCH 3/5] ARM: dts: imxrt1020: add dtsi file   Giulio Benetti
  • [PATCH 4/5] dt-bindings: pinctrl: add i.MXRT1020 pins definition   Giulio Benetti
    • [PATCH 4/5] dt-bindings: pinctrl: add i.MXRT1020 pins definition   Lukasz Majewski
      • [PATCH 4/5] dt-bindings: pinctrl: add i.MXRT1020 pins definition   Giulio Benetti
      • [PATCH 4/5] dt-bindings: pinctrl: add i.MXRT1020 pins definition   Giulio Benetti
  • [PATCH 5/5] Add support for i.MXRT1020-EVK board   Giulio Benetti
    • [PATCH 5/5] Add support for i.MXRT1020-EVK board   Lukasz Majewski
• [PATCH] mx7dsabresd: Boot in non secure by default   Fabio Estevam
• [PATCH 1/2] rockchip: video: Use ofnode_decode_display_timing() to parse timing   Kever Yang
  • [PATCH 2/2] rockchip: video: Convert to use APIs which support live DT   Kever Yang
    • [PATCH 2/2] rockchip: video: Convert to use APIs which support live DT   Simon Glass
  • [PATCH 1/2] rockchip: video: Use ofnode_decode_display_timing() to parse timing   Simon Glass
• [PATCH 1/2] rockchip: elgin-rv1108: Use syscon API to get grf base   Kever Yang
  • [PATCH 2/2] rockchip: evb-rv1108: Use syscon API to get grf base   Kever Yang
    • [PATCH 2/2] rockchip: evb-rv1108: Use syscon API to get grf base   Simon Glass
  • [PATCH 1/2] rockchip: elgin-rv1108: Use syscon API to get grf base   Simon Glass
    • [PATCH 1/2] rockchip: elgin-rv1108: Use syscon API to get grf base   Otavio Salvador
• [PATCH 00/10] usb: Covert to support Live DT   Kever Yang
  • [PATCH 01/10] usb: dwc3-of-simple: Drop redundant inclding header file   Kever Yang
  • [PATCH 02/10] usb: ehci-msm: Use dev interface to get device address   Kever Yang
    • [PATCH 02/10] usb: ehci-msm: Use dev interface to get device address   Ramon Fried
  • [PATCH 03/10] usb: cdns3: Migrate to use ofnode API for bind function   Kever Yang
  • [PATCH 04/10] usb: dwc3-generic: Migrate to use ofnode API for bind function   Kever Yang
  • [PATCH 05/10] usb: dwc3-generic: Use dev_read_addr() instead of devfdt_get_addr()   Kever Yang
    • [PATCH 05/10] usb: dwc3-generic: Use dev_read_addr() instead of devfdt_get_addr()   Marek Vasut
      • [PATCH 05/10] usb: dwc3-generic: Use dev_read_addr() instead of devfdt_get_addr()   Kever Yang
    • [PATCH 05/10] usb: dwc3-generic: Use dev_read_addr() instead of devfdt_get_addr()   Simon Glass
      • Re: [PATCH 05/10] usb: dwc3-generic: Use dev_read_addr() instead of devfdt_get_addr()【请注意，邮件由sjg at google.com代发】   Kever Yang
  • [PATCH 06/10] usb: host: dwc3-sti-glue: Migrate to use ofnode API   Kever Yang
    • [PATCH 06/10] usb: host: dwc3-sti-glue: Migrate to use ofnode API   Patrice CHOTARD
      • [PATCH 06/10] usb: host: dwc3-sti-glue: Migrate to use ofnode API   Kever Yang
  • [PATCH 07/10] usb: musb-new: Migrate to use ofnode API   Kever Yang
  • [PATCH 08/10] usb: dwc3: core: reorder the header file including sequence   Kever Yang
    • [PATCH 08/10] usb: dwc3: core: reorder the header file including sequence   Marek Vasut
  • [PATCH 09/10] usb: Use ofnode as usb_get_dr_mode() parameter   Kever Yang
    • [PATCH 09/10] usb: Use ofnode as usb_get_dr_mode() parameter   Neil Armstrong
  • [PATCH 10/10] usb: Use ofnode as usb_get_maximum_speed() parameter   Kever Yang
• [PATCH v2 0/4] x86: Improve support for chain-loading U-Boot   Simon Glass
  • [PATCH v2 1/4] x86: fsp: Allow skipping init code when chain loading   Simon Glass
    • [PATCH v2 1/4] x86: fsp: Allow skipping init code when chain loading   Bin Meng
  • [PATCH v2 2/4] x86: apl: Skip init code when chain loading   Simon Glass
  • [PATCH v2 3/4] x86: cpu: Skip init code when chain loading   Simon Glass
  • [PATCH v2 4/4] pci: Avoid auto-config when chain loading   Simon Glass
  • [PATCH v2 0/4] x86: Improve support for chain-loading U-Boot   Andy Shevchenko
    • [PATCH v2 0/4] x86: Improve support for chain-loading U-Boot   Simon Glass
• [PATCH] bdinfo: Show information about fdt blob via bdinfo   Heiko Schocher
  • [PATCH] bdinfo: Show information about fdt blob via bdinfo   Simon Glass
• [PATCH] rockchip: make_fit_atf: use correct fdt_x references in config nodes   Kever Yang
• [PATCH] rockchip: make the global board_fit_config_name_match __weak   Kever Yang
• [PATCH 1/2] arm64: ls1028a: remove fdt_high environment variable   Yuantian Tang
• [PATCH 2/2] arm64: ls1046a: remove fdt_high environment variable   Yuantian Tang
• no boot methods seem to work   Pallinger Péter
• [PATCH 0/5] CMD_SAVEENV ifdef cleanup   Rasmus Villemoes
  • [PATCH 1/5] env: add SAVEENV as an alias of the CMD_SAVEENV symbol   Rasmus Villemoes
  • [PATCH 2/5] env_internal.h: add alternative ENV_SAVE_PTR macro   Rasmus Villemoes
  • [PATCH 3/5] env/fat.c: remove private CMD_SAVEENV logic   Rasmus Villemoes
    • [PATCH 3/5] env/fat.c: remove private CMD_SAVEENV logic   Wolfgang Denk
      • [PATCH 3/5] env/fat.c: remove private CMD_SAVEENV logic   Rasmus Villemoes
      • [PATCH 3/5] env/fat.c: remove private CMD_SAVEENV logic   Wolfgang Denk
      • [PATCH 3/5] env/fat.c: remove private CMD_SAVEENV logic   Tom Rini
      • [PATCH 3/5] env/fat.c: remove private CMD_SAVEENV logic   Rasmus Villemoes
  • [PATCH 4/5] env/ext4.c: remove CONFIG_CMD_SAVEENV ifdef   Rasmus Villemoes
  • [PATCH 5/5] env/sf.c: drop private CMD_SAVEENV logic   Rasmus Villemoes
  • [PATCH 0/5] CMD_SAVEENV ifdef cleanup   Wolfgang Denk
    • [PATCH 0/5] CMD_SAVEENV ifdef cleanup   Rasmus Villemoes
• [PATCH] rockchip: rk3399: add target type for evb based board   Kever Yang
• [Patch v4 4/7] imx: imx6sx: Remove unused 'num-cs' property   Priyanka Jain (OSS)
  • [Patch v4 4/7] imx: imx6sx: Remove unused 'num-cs' property   Fabio Estevam
    • [EXT] Re: [Patch v4 4/7] imx: imx6sx: Remove unused 'num-cs' property   Kuldeep Singh
• [PATCH] ARM: zynq: Fix addresses in partition definitions   Michal Simek
• [PATCH v2 00/21] Enable ARM Trusted Firmware for U-Boot   chee.hong.ang at intel.com
  • [PATCH v2 02/21] arm: socfpga: add fit source file for pack itb with ATF   chee.hong.ang at intel.com
  • [PATCH v2 03/21] arm: socfpga: Add function for checking description from FIT image   chee.hong.ang at intel.com
    • [PATCH v2 03/21] arm: socfpga: Add function for checking description from FIT image   Marek Vasut
      • [PATCH v2 03/21] arm: socfpga: Add function for checking description from FIT image   Dalon L Westergreen
      • [PATCH v2 03/21] arm: socfpga: Add function for checking description from FIT image   Marek Vasut
  • [PATCH v2 04/21] arm: socfpga: Load FIT image with ATF support   chee.hong.ang at intel.com
  • [PATCH v2 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   chee.hong.ang at intel.com
    • [PATCH v2 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   Marek Vasut
      • [PATCH v2 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   Ang, Chee Hong
      • [PATCH v2 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   Marek Vasut
      • [PATCH v2 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   Ang, Chee Hong
      • [PATCH v2 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   Marek Vasut
      • [PATCH v2 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   Ang, Chee Hong
      • [PATCH v2 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   Ang, Chee Hong
      • [PATCH v2 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   Marek Vasut
  • [PATCH v2 06/21] configs: socfpga: Enable FIT image loading with ATF support   chee.hong.ang at intel.com
    • [PATCH v2 06/21] configs: socfpga: Enable FIT image loading with ATF support   Marek Vasut
      • [PATCH v2 06/21] configs: socfpga: Enable FIT image loading with ATF support   Ang, Chee Hong
      • [PATCH v2 06/21] configs: socfpga: Enable FIT image loading with ATF support   Marek Vasut
      • [PATCH v2 06/21] configs: socfpga: Enable FIT image loading with ATF support   Simon Goldschmidt
      • [PATCH v2 06/21] configs: socfpga: Enable FIT image loading with ATF support   Westergreen, Dalon
  • [PATCH v2 07/21] arm: socfpga: Disable "spin-table" method for booting Linux   chee.hong.ang at intel.com
  • [PATCH v2 08/21] arm: socfpga: Add SMC helper function for Intel SOCFPGA (64bits)   chee.hong.ang at intel.com
    • [PATCH v2 08/21] arm: socfpga: Add SMC helper function for Intel SOCFPGA (64bits)   Marek Vasut
      • [PATCH v2 08/21] arm: socfpga: Add SMC helper function for Intel SOCFPGA (64bits)   Ang, Chee Hong
  • [PATCH v2 09/21] arm: socfpga: Define SMC function identifiers for PSCI SiP services   chee.hong.ang at intel.com
    • [PATCH v2 09/21] arm: socfpga: Define SMC function identifiers for PSCI SiP services   Marek Vasut
      • [PATCH v2 09/21] arm: socfpga: Define SMC function identifiers for PSCI SiP services   Ang, Chee Hong
      • [PATCH v2 09/21] arm: socfpga: Define SMC function identifiers for PSCI SiP services   Marek Vasut
  • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   chee.hong.ang at intel.com
    • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Marek Vasut
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Ang, Chee Hong
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Marek Vasut
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Ang, Chee Hong
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Marek Vasut
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Ang, Chee Hong
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Marek Vasut
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Ang, Chee Hong
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Marek Vasut
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Ang, Chee Hong
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Marek Vasut
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Ang, Chee Hong
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Ang, Chee Hong
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Simon Goldschmidt
      • [PATCH v2 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   Ang, Chee Hong
  • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   chee.hong.ang at intel.com
    • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Marek Vasut
      • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Ang, Chee Hong
      • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Marek Vasut
      • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Ang, Chee Hong
    • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Ang, Chee Hong
      • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Simon Goldschmidt
      • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Ang, Chee Hong
      • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Ang, Chee Hong
      • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Simon Goldschmidt
      • [PATCH v2 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   Ang, Chee Hong
  • [PATCH v2 12/21] arm: socfpga: Secure register access in PHY mode setup   chee.hong.ang at intel.com
    • [PATCH v2 12/21] arm: socfpga: Secure register access in PHY mode setup   Ang, Chee Hong
      • [PATCH v2 12/21] arm: socfpga: Secure register access in PHY mode setup   Marek Vasut
  • [PATCH v2 13/21] arm: socfpga: Secure register access for reading PLL frequency   chee.hong.ang at intel.com
    • [PATCH v2 13/21] arm: socfpga: Secure register access for reading PLL frequency   Ang, Chee Hong
      • [PATCH v2 13/21] arm: socfpga: Secure register access for reading PLL frequency   Ang, Chee Hong
      • [PATCH v2 13/21] arm: socfpga: Secure register access for reading PLL frequency   Marek Vasut
      • [PATCH v2 13/21] arm: socfpga: Secure register access for reading PLL frequency   Ang, Chee Hong
      • [PATCH v2 13/21] arm: socfpga: Secure register access for reading PLL frequency   Ang, Chee Hong
      • [PATCH v2 13/21] arm: socfpga: Secure register access for reading PLL frequency   Ang, Chee Hong
  • [PATCH v2 14/21] mmc: dwmmc: socfpga: Secure register access in MMC driver   chee.hong.ang at intel.com
    • [PATCH v2 14/21] mmc: dwmmc: socfpga: Secure register access in MMC driver   Ang, Chee Hong
  • [PATCH v2 15/21] net: designware: socfpga: Secure register access in MAC driver   chee.hong.ang at intel.com
    • [PATCH v2 15/21] net: designware: socfpga: Secure register access in MAC driver   Ang, Chee Hong
  • [PATCH v2 16/21] arm: socfpga: Secure register access in Reset Manager driver   chee.hong.ang at intel.com
    • [PATCH v2 16/21] arm: socfpga: Secure register access in Reset Manager driver   Ang, Chee Hong
  • [PATCH v2 17/21] arm: socfpga: stratix10: Initialize timer in SPL   chee.hong.ang at intel.com
  • [PATCH v2 18/21] arm: socfpga: Bridge reset invokes SMC service calls in EL2   chee.hong.ang at intel.com
  • [PATCH v2 19/21] arm: socfpga: stratix10: Add ATF support to FPGA reconfig driver   chee.hong.ang at intel.com
  • [PATCH v2 20/21] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold()   chee.hong.ang at intel.com
  • [PATCH v2 21/21] configs: socfpga: Add defconfig for Agilex and Stratix 10 without ATF support   chee.hong.ang at intel.com
• [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   chee.hong.ang at intel.com
  • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Marek Vasut
    • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Ang, Chee Hong
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Marek Vasut
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Westergreen, Dalon
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Marek Vasut
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Ang, Chee Hong
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Marek Vasut
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Ang, Chee Hong
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Marek Vasut
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Westergreen, Dalon
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Marek Vasut
      • [PATCH v2 01/21] configs: agilex: Remove CONFIG_OF_EMBED   Westergreen, Dalon
• [PATCH] rename keymile boards to ABB wcom   Holger Brunck
  • [PATCH] rename keymile boards to ABB wcom   Heiko Schocher
    • [PATCH] rename keymile boards to ABB wcom   Marek Vasut
  • [PATCH] rename keymile boards to ABB wcom   Wolfgang Denk
• [PATCH 1/3] ARM: dts: imx6sx: Sync with kernel 5.4.16   Fabio Estevam
  • [PATCH 2/3] ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16   Fabio Estevam
  • [PATCH 3/3] mx6sxsabresd: Enable DM_PCI   Fabio Estevam
• [PATCH v1 1/4] ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper   Igor Opaniuk
  • [PATCH v1 2/4] ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-proper   Igor Opaniuk
    • [PATCH v1 2/4] ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-proper   Oleksandr Suvorov
  • [PATCH v1 3/4] ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes   Igor Opaniuk
    • [PATCH v1 3/4] ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes   Oleksandr Suvorov
  • [PATCH v1 4/4] ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes   Igor Opaniuk
    • [PATCH v1 4/4] ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes   Oleksandr Suvorov
  • [PATCH v1 1/4] ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper   Oleksandr Suvorov
• [PATCH] imx: remove woodburn board   Stefano Babic
• m68k hangs silently   Angelo Dureghello
  • m68k hangs silently   Simon Glass
    • m68k hangs silently   Angelo Dureghello
• mkimage segfault on MacOS   Alexander von Gluck IV
• [PATCH] watchdog: mpc8xx_wdt: Allow selection of watchdog mode through environment   Christophe Leroy
• [PATCH] lx2160a : Add emmc in boot_targets environment variable   Meenakshi Aggarwal
• [PATCH] env: ti: boot: Fix Android boot on AM57x EVM   Sam Protsenko
  • [PATCH] env: ti: boot: Fix Android boot on AM57x EVM   Eugeniu Rosca
    • [PATCH] env: ti: boot: Fix Android boot on AM57x EVM   Sam Protsenko
• Pull request for UEFI sub-system for efi-2020-04-rc3   Heinrich Schuchardt
  • Pull request for UEFI sub-system for efi-2020-04-rc3   Tom Rini
• [RFC PATCH 0/2] Update reserved memory for simple framebuffer   Michael Trimarchi
  • [RFC PATCH 1/2] common: fdt: Add a function for reserving memory without kernel linear mapping   Michael Trimarchi
    • [RFC PATCH 1/2] common: fdt: Add a function for reserving memory without kernel linear mapping   Simon Glass
  • [RFC PATCH 2/2] video: meson: Use reserving memory function without kernel linear mapping   Michael Trimarchi
    • [RFC PATCH 2/2] video: meson: Use reserving memory function without kernel linear mapping   Simon Glass
      • [RFC PATCH 2/2] video: meson: Use reserving memory function without kernel linear mapping   Michael Nazzareno Trimarchi
• [PATCH V2] ARM: socfpga: Add initial support for the ABB SECU board   Marek Vasut
• Unwanted change in Kconfig for mpc8xx_wdt watchdog ?   Christophe Leroy
  • Unwanted change in Kconfig for mpc8xx_wdt watchdog ?   Patrice CHOTARD
• [PATCH 3/4 v5] watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup   Christophe Leroy
  • [PATCH 3/4 v5] watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup   Stefan Roese
    • [PATCH 3/4 v5] watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup   Christophe Leroy
• [PATCH 1/4 v5] watchdog: Implement generic watchdog_reset() version   Christophe Leroy
  • [PATCH 1/4 v5] watchdog: Implement generic watchdog_reset() version   Stefan Roese
    • [PATCH 1/4 v5] watchdog: Implement generic watchdog_reset() version   Christophe Leroy
      • [PATCH 1/4 v5] watchdog: Implement generic watchdog_reset() version   Stefan Roese
      • [PATCH 1/4 v5] watchdog: Implement generic watchdog_reset() version   Rasmus Villemoes
      • [PATCH 1/4 v5] watchdog: Implement generic watchdog_reset() version   Stefan Roese
• [PATCH 0/8] malloc: implement USE_DL_PREFIX using inline functions   Simon Goldschmidt
  • [PATCH 1/8] malloc: implement USE_DL_PREFIX via inline functions   Simon Goldschmidt
    • [PATCH 1/8] malloc: implement USE_DL_PREFIX via inline functions   Simon Glass
  • [PATCH 2/8] Revert "mtd: Rename free() to rfree()"   Simon Goldschmidt
    • [PATCH 2/8] Revert "mtd: Rename free() to rfree()"   Fabio Estevam
    • [PATCH 2/8] Revert "mtd: Rename free() to rfree()"   Simon Glass
  • [PATCH 3/8] Revert "dma: Rename free() to rfree()"   Simon Goldschmidt
    • [PATCH 3/8] Revert "dma: Rename free() to rfree()"   Simon Glass
  • [PATCH 4/8] Revert "clk: Rename free() to rfree()"   Simon Goldschmidt
    • [PATCH 4/8] Revert "clk: Rename free() to rfree()"   Simon Glass
  • [PATCH 5/8] Revert "gpio: Rename free() to rfree()"   Simon Goldschmidt
    • [PATCH 5/8] Revert "gpio: Rename free() to rfree()"   Simon Glass
  • [PATCH 6/8] Revert "reset: Rename free() to rfree()"   Simon Goldschmidt
    • [PATCH 6/8] Revert "reset: Rename free() to rfree()"   Simon Glass
  • [PATCH 7/8] Revert "power-domain: Rename free() to rfree()"   Simon Goldschmidt
    • [PATCH 7/8] Revert "power-domain: Rename free() to rfree()"   Simon Glass
  • [PATCH 8/8] Revert "mailbox: Rename free() to rfree()"   Simon Goldschmidt
    • [PATCH 8/8] Revert "mailbox: Rename free() to rfree()"   Simon Glass
  • [PATCH 0/8] malloc: implement USE_DL_PREFIX using inline functions   Simon Glass
• [PATCH 1/1] efi_loader: implement EFI_RT_PROPERTIES_TABLE   Heinrich Schuchardt
  • [PATCH 1/1] efi_loader: implement EFI_RT_PROPERTIES_TABLE   Ard Biesheuvel
• [PING][PATCH] Optionally: Set the serial# environment variable on the i.MX7.   Mark G
• Please pull mmc mmc-2-19-2020   Peng Fan
  • Please pull mmc mmc-2-19-2020   Tom Rini
    • Please pull mmc mmc-2-19-2020   Masahiro Yamada
      • Please pull mmc mmc-2-19-2020   Peng Fan
      • Please pull mmc mmc-2-19-2020   Masahiro Yamada
      • Please pull mmc mmc-2-19-2020   Tom Rini
• [PATCH v2 0/9] usb: Covert to support Live DT   Kever Yang
  • [PATCH v2 1/9] usb: dwc3-of-simple: Drop redundant inclding header file   Kever Yang
    • [PATCH v2 1/9] usb: dwc3-of-simple: Drop redundant inclding header file   Marek Vasut
  • [PATCH v2 2/9] usb: ehci-msm: Use dev interface to get device address   Kever Yang
  • [PATCH v2 3/9] usb: cdns3: Migrate to use ofnode API for bind function   Kever Yang
  • [PATCH v2 4/9] usb: dwc3-generic: Migrate to use ofnode API for bind function   Kever Yang
  • [PATCH v2 5/9] usb: dwc3-generic: Use dev_read_addr() instead of devfdt_get_addr()   Kever Yang
    • [PATCH v2 5/9] usb: dwc3-generic: Use dev_read_addr() instead of devfdt_get_addr()   Marek Vasut
  • [PATCH v2 6/9] usb: host: dwc3-sti-glue: Migrate to use ofnode API   Kever Yang
  • [PATCH v2 7/9] usb: musb-new: Migrate to use ofnode API   Kever Yang
  • [PATCH v2 8/9] usb: Use ofnode as usb_get_dr_mode() parameter   Kever Yang
  • [PATCH v2 9/9] usb: Use ofnode as usb_get_maximum_speed() parameter   Kever Yang
• [PATCH 0/6] rockchip: efuse: add support for more platfroms   Finley Xiao
  • [PATCH 1/6] rockchip: efuse: Add support for rk3288 efuse   Finley Xiao
    • [PATCH 1/6] rockchip: efuse: Add support for rk3288 efuse   Finley Xiao
    • [PATCH 1/6] rockchip: efuse: Add support for rk3288 efuse   Finley Xiao
  • [PATCH 1/2] rockchip: efuse: Add support for rk3328 non-secure efuse   Finley Xiao
    • [PATCH 1/2] rockchip: efuse: Add support for rk3328 non-secure efuse   Finley Xiao
  • [PATCH 2/2] rockchip: efuse: Add support for rk1808 non-secure efuse   Finley Xiao
    • [PATCH 2/2] rockchip: efuse: Add support for rk1808 non-secure efuse   Finley Xiao
  • [PATCH 0/6] rockchip: efuse: add support for more platfroms   Finley Xiao
• [PATCH 2/6] rockchip: efuse: Add support for rk3066a efuse   Finley Xiao
  • [PATCH 2/6] rockchip: efuse: Add support for rk3066a efuse   Finley Xiao
  • [PATCH 2/6] rockchip: efuse: Add support for rk3066a efuse   Finley Xiao
• [PATCH 0/6] rockchip: efuse: add support for more paltforms   Finley Xiao
  • [PATCH 3/6] rockchip: efuse: Add support for rk3188 efuse   Finley Xiao
  • [PATCH 4/6] rockchip: efuse: Add support for rk322x efuse   Finley Xiao
• [PATCH 0/3] Remove CONFIG_MMC_BROKEN_CD   Jaehoon Chung
  • [PATCH 0/3] Remove CONFIG_MMC_BROKEN_CD   Tom Rini
    • [PATCH 0/3] Remove CONFIG_MMC_BROKEN_CD   Jaehoon Chung
      • [PATCH 0/3] Remove CONFIG_MMC_BROKEN_CD   Jaehoon Chung
      • [PATCH 0/3] Remove CONFIG_MMC_BROKEN_CD   Tom Rini
      • [PATCH 0/3] Remove CONFIG_MMC_BROKEN_CD   Jaehoon Chung
      • [PATCH 0/3] Remove CONFIG_MMC_BROKEN_CD   Tom Rini
      • [PATCH 0/3] Remove CONFIG_MMC_BROKEN_CD   Jaehoon Chung
• [PATCH 1/3] mmc: jz_mmc; add MMC_CAP_NEEDS_POLL by default   Jaehoon Chung
• [PATCH 2/3] mmc: check the flags of host_caps about broken-cd   Jaehoon Chung
• [PATCH 3/3] mmc: Kconfig: remove MMC_BROKEN_CD configuration   Jaehoon Chung
• [PATCH v4 04/11] dma-mapping: add <asm/dma-mapping.h> for all architectures   Masahiro Yamada
• Try to use AHAB but ahab.c is not compiled   Oliver Graute
  • Try to use AHAB but ahab.c is not compiled   Oliver Graute
• [PATCH] watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOG   Christophe Leroy
  • [PATCH] watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOG   Stefan Roese
  • [PATCH] watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOG   Tom Rini
    • [PATCH] watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOG   Christophe Leroy
  • [PATCH] watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOG   Tom Rini
• [PATCH] bootcounter: add DM support for memory based bootcounter   Heiko Schocher
  • [PATCH] bootcounter: add DM support for memory based bootcounter   Simon Glass
    • [PATCH] bootcounter: add DM support for memory based bootcounter   Heiko Schocher
• spi_flash_read issue   dvo
  • spi_flash_read issue   Fabio Estevam
    • spi_flash_read issue   dvo
• [PATCH] cmd: Add unlz4 command   Yusuke Ashiduka
• Please pull mmc mmc-2-20-2020   Peng Fan
  • Please pull mmc mmc-2-20-2020   Tom Rini
• [PATCH 0/3] Unified Broadcom NAND controller for ARM   Nicolas Heemeryck
  • [PATCH 1/3] nand: brcmnand: add bcmbca support   Nicolas Heemeryck
  • [PATCH 2/3] configs: use unified bcmbca nand controller   Nicolas Heemeryck
  • [PATCH 3/3] brcmnand: drop arch specific nand controller   Nicolas Heemeryck
• [PATCH] net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII   Nicolas Saenz Julienne
  • [PATCH] net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII   Nicolas Saenz Julienne
  • [PATCH] net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII   Matthias Brugger
    • [PATCH] net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII   Nicolas Saenz Julienne
      • [PATCH] net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII   Nicolas Saenz Julienne
  • [PATCH] net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII   Florian Fainelli
    • [PATCH] net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII   Nicolas Saenz Julienne
• [Patch v5 0/7] Transition of fsl qspi driver to spi-mem framework   Kuldeep Singh
  • [Patch v5 1/7] spi: Transform the FSL QuadSPI driver to use the SPI MEM API   Kuldeep Singh
  • [Patch v5 2/7] treewide: Remove unused FSL QSPI config options for Layerscape platforms   Kuldeep Singh
  • [Patch v5 3/7] treewide: Remove unused FSL QSPI config options for IMX platforms   Kuldeep Singh
  • [Patch v5 4/7] configs: ls1043a: Move CONFIG_FSL_QSPI and SPI_FLASH_SPANSION to defconfig   Kuldeep Singh
  • [Patch v5 5/7] configs: ls1012a: Enable CONFIG_SPI_FLASH_SPANSION in defconfigs   Kuldeep Singh
  • [Patch v5 6/7] configs: ls1046a: Move SPI_FLASH_SPANSION to defconfig   Kuldeep Singh
  • [Patch v5 7/7] treewide: Update fsl qspi node dt properties as per spi-mem driver   Kuldeep Singh
• [PATCH 0/2] sunxi: clean up defconfig files   Andre Przywara
  • [PATCH 2/2] sunxi: Remove no longer needed default options from defconfigs   Andre Przywara
  • [PATCH 0/2] sunxi: clean up defconfig files   Maxime Ripard
• [PATCH 1/2] sunxi: Move common defconfig options to Kconfig   Andre Przywara
• [PATCH] board: nitrogen6x: migrate to CONFIG_DM_VIDEO   Troy Kisky
  • [PATCH] board: nitrogen6x: migrate to CONFIG_DM_VIDEO   Fabio Estevam
    • [PATCH] board: nitrogen6x: migrate to CONFIG_DM_VIDEO   Troy Kisky
      • [PATCH] board: nitrogen6x: migrate to CONFIG_DM_VIDEO   Fabio Estevam
• [PATCH 1/1] armv8: ls1028a: Update secure boot headers offset   Priyanka Singh
  • [PATCH 1/1] configs: ls1012ardb: secure boot: Add PFE config   Priyanka Singh
• Pull request: u-boot-rockchip-20200220   Kever Yang
  • Pull request: u-boot-rockchip-20200220   Tom Rini
• [PATCH 1/2] configs: socfpga: Add QSPI support for Cyclone 5   Ley Foon Tan
  • [PATCH 2/2] configs: socfpga: Add QSPI boot for Arria 10 SoCDK   Ley Foon Tan
• [PATCH] configs: socfpga: cyclone5: Enable CONFIG_NET_RANDOM_ETHADDR   Ley Foon Tan
• [PATCH 1/2] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs   Alex Nemirovsky
  • [PATCH 2/2] board: presidio-asic: Add eMMC board support   Alex Nemirovsky
• [PATCH 0/2] doc: build HTML docs in CI   Heinrich Schuchardt
• [PATCH 1/2] doc/Makefile: turn warnings into errors   Heinrich Schuchardt
  • [PATCH 1/2] doc/Makefile: turn warnings into errors   Tom Rini
    • [PATCH 1/2] doc/Makefile: turn warnings into errors   Heinrich Schuchardt
      • [PATCH 1/2] doc/Makefile: turn warnings into errors   Heinrich Schuchardt
      • [PATCH 1/2] doc/Makefile: turn warnings into errors   Tom Rini
  • [PATCH 1/2] doc/Makefile: turn warnings into errors   Bin Meng
• [PATCH 2/2] travis: build HTML docs   Heinrich Schuchardt
  • [PATCH 2/2] travis: build HTML docs   Bin Meng
  • [PATCH 2/2] travis: build HTML docs   Bin Meng
• [PATCH 1/1] .dockerignore: remove .git/ from build context   Heinrich Schuchardt
  • [PATCH 1/1] .dockerignore: remove .git/ from build context   Bin Meng
• [PATCH 1/1] Dockerfile: add imagemagick   Heinrich Schuchardt
  • [PATCH 1/1] Dockerfile: add imagemagick   Bin Meng
  • [PATCH 1/1] Dockerfile: add imagemagick   Tom Rini
• [PATCH 1/1] gitlab: build HTML documentation   Heinrich Schuchardt
  • [PATCH 1/1] gitlab: build HTML documentation   Bin Meng
• [PATCH 1/1] azure: build HTML documentation   Heinrich Schuchardt
  • [PATCH 1/1] azure: build HTML documentation   Bin Meng
• [PATCH v3 00/21] Enable ARM Trusted Firmware for U-Boot   chee.hong.ang at intel.com
  • [PATCH v3 01/21] configs: agilex: Remove CONFIG_OF_EMBED   chee.hong.ang at intel.com
  • [PATCH v3 02/21] arm: socfpga: add fit source file for pack itb with ATF   chee.hong.ang at intel.com
  • [PATCH v3 03/21] arm: socfpga: Add function for checking description from FIT image   chee.hong.ang at intel.com
  • [PATCH v3 04/21] arm: socfpga: Load FIT image with ATF support   chee.hong.ang at intel.com
  • [PATCH v3 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   chee.hong.ang at intel.com
  • [PATCH v3 06/21] configs: socfpga: Enable FIT image loading with ATF support   chee.hong.ang at intel.com
  • [PATCH v3 07/21] arm: socfpga: Disable "spin-table" method for booting Linux   chee.hong.ang at intel.com
  • [PATCH v3 08/21] arm: socfpga: Add SMC helper function for Intel SOCFPGA (64bits)   chee.hong.ang at intel.com
  • [PATCH v3 09/21] arm: socfpga: Define SMC function identifiers for PSCI SiP services   chee.hong.ang at intel.com
  • [PATCH v3 10/21] arm: socfpga: Add secure register access helper functions for SoC 64bits   chee.hong.ang at intel.com
  • [PATCH v3 11/21] arm: socfpga: Secure register access for clock manager (SoC 64bits)   chee.hong.ang at intel.com
  • [PATCH v3 12/21] arm: socfpga: Secure register access in PHY mode setup   chee.hong.ang at intel.com
  • [PATCH v3 13/21] arm: socfpga: Secure register access for reading PLL frequency   chee.hong.ang at intel.com
  • [PATCH v3 14/21] mmc: dwmmc: socfpga: Secure register access in MMC driver   chee.hong.ang at intel.com
  • [PATCH v3 15/21] net: designware: socfpga: Secure register access in MAC driver   chee.hong.ang at intel.com
  • [PATCH v3 16/21] arm: socfpga: Secure register access in Reset Manager driver   chee.hong.ang at intel.com
  • [PATCH v3 17/21] arm: socfpga: stratix10: Initialize timer in SPL   chee.hong.ang at intel.com
  • [PATCH v3 18/21] arm: socfpga: Bridge reset invokes SMC service calls in EL2   chee.hong.ang at intel.com
  • [PATCH v3 19/21] arm: socfpga: stratix10: Add ATF support to FPGA reconfig driver   chee.hong.ang at intel.com
  • [PATCH v3 20/21] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold()   chee.hong.ang at intel.com
  • [PATCH v3 21/21] configs: socfpga: Add defconfig for Agilex and Stratix 10 without ATF support   chee.hong.ang at intel.com
• [PATCH v7 0/7] rsa: extend rsa_verify() for UEFI secure boot   AKASHI Takahiro
  • [PATCH v7 1/7] lib: rsa: decouple rsa from FIT image verification   AKASHI Takahiro
  • [PATCH v7 2/7] rsa: add CONFIG_RSA_VERIFY_WITH_PKEY config   AKASHI Takahiro
  • [PATCH v7 3/7] include: image.h: add key info to image_sign_info   AKASHI Takahiro
  • [PATCH v7 4/7] lib: rsa: generate additional parameters for public key   AKASHI Takahiro
  • [PATCH v7 5/7] lib: rsa: add rsa_verify_with_pkey()   AKASHI Takahiro
  • [PATCH v7 6/7] test: add rsa_verify() unit test   AKASHI Takahiro
  • [PATCH v7 7/7] test: enable RSA library test on sandbox   AKASHI Takahiro
  • [PATCH v7 0/7] rsa: extend rsa_verify() for UEFI secure boot   Tom Rini
    • [PATCH v7 0/7] rsa: extend rsa_verify() for UEFI secure boot   AKASHI Takahiro
• [PATCH 1/2] efi_loader: Implement FileLoad2 for initramfs loading   Ilias Apalodimas
  • [PATCH 2/2] efi_selftest: add selftests for loadfile2 used to load initramfs   Ilias Apalodimas
• [PATCH] usb: gadget: Handle SPL_* configs   Lukasz Majewski
  • [PATCH] usb: gadget: Handle SPL_* configs   Nathan Rossi
• [PATCH] doc: Chromebook Coral: Fix typo for "Top of CAR region"   Wolfgang Wallner
  • [PATCH] doc: Chromebook Coral: Fix typo for "Top of CAR region"   Bin Meng
    • [PATCH] doc: Chromebook Coral: Fix typo for "Top of CAR region"   Bin Meng
• [PATCH 0/3] mediatek: pwm: add pwm driver for MediaTek SoCs   Sam Shih
  • [PATCH 1/3] mediatek: pwm: add pwm driver for MediaTek SoCs   Sam Shih
  • [PATCH 2/3] arm: dts: add pwm support for MediaTek SoCs   Sam Shih
  • [PATCH 3/3] arm: mediatek: remove unuse binman config   Sam Shih
    • Aw: [PATCH 3/3] arm: mediatek: remove unuse binman config   Frank Wunderlich
  • [PATCH 0/3] mediatek: pwm: add pwm driver for MediaTek SoCs   Frank Wunderlich
• [PATCH v2] env: ti: boot: Fix Android boot on AM57x EVM   Sam Protsenko
  • [PATCH v2] env: ti: boot: Fix Android boot on AM57x EVM   Sam Protsenko
  • [PATCH v2] env: ti: boot: Fix Android boot on AM57x EVM   Eugeniu Rosca
  • [PATCH v2] env: ti: boot: Fix Android boot on AM57x EVM   Lokesh Vutla
• [GIT] Pull request: u-boot-dfu (21.02.2020)   Lukasz Majewski
  • [GIT] Pull request: u-boot-dfu (21.02.2020)   Marek Vasut
    • [GIT] Pull request: u-boot-dfu (21.02.2020)   Tom Rini
      • [GIT] Pull request: u-boot-dfu (21.02.2020)   Marek Vasut
      • [GIT] Pull request: u-boot-dfu (21.02.2020)   Tom Rini
• [PATCH] net: phy: Fix overlong PHY timeout   Matthias Brugger
• [PATCH v2 0/5] make htmldocs in CI   Heinrich Schuchardt
  • [PATCH v2 1/5] doc: update doc/sphinx/kerneldoc.py   Heinrich Schuchardt
    • [PATCH v2 1/5] doc: update doc/sphinx/kerneldoc.py   Tom Rini
  • [PATCH v2 5/5] doc/Makefile: turn warnings into errors   Heinrich Schuchardt
    • [PATCH v2 5/5] doc/Makefile: turn warnings into errors   Bin Meng
    • [PATCH v2 5/5] doc/Makefile: turn warnings into errors   Tom Rini
• [PATCH v2 2/5] travis: build HTML docs   Heinrich Schuchardt
  • [PATCH v2 2/5] travis: build HTML docs   Bin Meng
  • [PATCH v2 2/5] travis: build HTML docs   Tom Rini
• [PATCH v2 3/5] gitlab: build HTML documentation   Heinrich Schuchardt
  • [PATCH v2 3/5] gitlab: build HTML documentation   Tom Rini
• [PATCH v2 4/5] azure: build HTML documentation   Heinrich Schuchardt
  • [PATCH v2 4/5] azure: build HTML documentation   Tom Rini
• [PATCH 1/1] travis-ci: provide env__efi_fit_tftp_file   Heinrich Schuchardt
  • [PATCH 1/1] travis-ci: provide env__efi_fit_tftp_file   Stephen Warren
• [PATCH] efi_selftest: Ensure we include the object directory for generated headers   Tom Rini
  • [PATCH] efi_selftest: Ensure we include the object directory for generated headers   Heinrich Schuchardt
    • [PATCH] efi_selftest: Ensure we include the object directory for generated headers   Tom Rini
      • [PATCH] efi_selftest: Ensure we include the object directory for generated headers   Heinrich Schuchardt
      • [PATCH] efi_selftest: Ensure we include the object directory for generated headers   Masahiro Yamada
      • [PATCH] efi_selftest: Ensure we include the object directory for generated headers   Tom Rini
• [PATCH 1/1] MAINTAINERS: set maintainer for doc/api/efi.rst   Heinrich Schuchardt
  • [PATCH 1/1] MAINTAINERS: set maintainer for doc/api/efi.rst   Tom Rini
• [PATCH 1/1] doc/efi: add load file 2 protocol to HTML documentation   Heinrich Schuchardt
• [PATCH v2 1/1] net: tftp: use correct printf codes   Heinrich Schuchardt
• [PATCH 1/1] doc: board: qemu-mips.rst: fix code examples   Heinrich Schuchardt
• [PATCH v3 00/13] Add DM/DTS support for omap video driver   Dario Binacchi
  • [PATCH v3 01/13] video: omap: use BIT() and GENMASK() macros   Dario Binacchi
  • [PATCH v3 02/13] video: omap: add missing bitfield masks   Dario Binacchi
  • [PATCH v3 03/13] video: omap: fix coding style on use of spaces   Dario Binacchi
  • [PATCH v3 04/13] video: omap: fix bitfields order   Dario Binacchi
  • [PATCH v3 05/13] video: omap: rename LCD controller registers   Dario Binacchi
  • [PATCH v3 06/13] video: omap: fix debug message   Dario Binacchi
  • [PATCH v3 07/13] video: omap: add loop exit conditions to the dpll setup   Dario Binacchi
  • [PATCH v3 08/13] video: omap: create two routines to set the pixel clock rate   Dario Binacchi
  • [PATCH v3 09/13] video: omap: add support for DM/DTS   Dario Binacchi
  • [PATCH v3 10/13] arm: dts: am335x: add 'u-boot, dm-pre-reloc' to panel   Dario Binacchi
    • [PATCH v3 10/13] arm: dts: am335x: add 'u-boot,dm-pre-reloc' to panel   LTEC AG
  • [PATCH v3 11/13] fdt: video: omap: add framebuffer and panel bindings   Dario Binacchi
  • [PATCH v3 12/13] video: omap: fix pixel-per-line bitfield setting   Dario Binacchi
  • [PATCH v3 13/13] board: brxre1: fix building errors   Dario Binacchi
  • [PATCH v3 00/13] Add DM/DTS support for omap video driver   Lokesh Vutla
• [PATCH v5 01/16] efi_loader: add CONFIG_EFI_SECURE_BOOT config option   Heinrich Schuchardt
  • [PATCH v5 01/16] efi_loader: add CONFIG_EFI_SECURE_BOOT config option   AKASHI Takahiro
• [PATCH v5 04/16] efi_loader: variable: support variable authentication   Heinrich Schuchardt
  • [PATCH v5 04/16] efi_loader: variable: support variable authentication   AKASHI Takahiro
  • [PATCH v5 04/16] efi_loader: variable: support variable authentication   Heinrich Schuchardt
    • [PATCH v5 04/16] efi_loader: variable: support variable authentication   AKASHI Takahiro
• [PATCH v5 16/16] travis: add packages for UEFI secure boot test   Heinrich Schuchardt
  • [PATCH v5 16/16] travis: add packages for UEFI secure boot test   AKASHI Takahiro
• [PATCH v5 00/16] efi_loader: add secure boot support   Heinrich Schuchardt
  • [PATCH v5 00/16] efi_loader: add secure boot support   Heinrich Schuchardt
  • [PATCH v5 00/16] efi_loader: add secure boot support   AKASHI Takahiro
• [PATCH v3 01/21] arm: actions: Add common framework for Actions Owl Semi SoCs   Manivannan Sadhasivam
• [PATCH v3 02/21] arm: actions: rename sysmap-s900 to sysmap-owl   Manivannan Sadhasivam
• [PATCH v3 03/21] clk: actions: Add common clock driver   Manivannan Sadhasivam
• [PATCH v3 04/21] arm: add support Actions Semi S700   Manivannan Sadhasivam
• [PATCH v3 05/21] arm: actions: add S700 SoC device tree   Manivannan Sadhasivam
• [PATCH v3 06/21] actions:s700: add u-boot specific dts file   Manivannan Sadhasivam
• [PATCH v3 07/21] arm: dts: sync dts for Action Semi S900   Manivannan Sadhasivam
• [PATCH v3 08/21] actions: s900: add u-boot specific dts file   Manivannan Sadhasivam
• [PATCH v3 09/21] arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock binding   Manivannan Sadhasivam
  • [PATCH v3 09/21] arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock binding   Andre Przywara
    • [PATCH v3 09/21] arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock binding   Manivannan Sadhasivam
• [PATCH v3 10/21] serial: actions: add uart support for s700   Manivannan Sadhasivam
• [PATCH v3 11/21] arm: add Cubieboard7 board support   Manivannan Sadhasivam
• [PATCH v3 15/21] reset: add driver for generic reset controllers   Manivannan Sadhasivam
  • [PATCH v3 15/21] reset: add driver for generic reset controllers   Andre Przywara
• [U-Boot] [PATCH 1/4 v4] watchdog: Implement generic watchdog_reset() version   Chris Packham
• [PATCH 000/108] RFC: dm: Add programatic generation of ACPI tables   Simon Glass
• [PATCH] watchdog: Handle timer wrap around   Chris Packham
  • [PATCH] watchdog: Handle timer wrap around   Stefan Roese
• [PATCH] spi: cadence-qspi: Move ref clock calculation to probe   Pratyush Yadav
  • [PATCH] spi: cadence-qspi: Move ref clock calculation to probe   Vignesh Raghavendra
    • [PATCH] spi: cadence-qspi: Move ref clock calculation to probe   Simon Goldschmidt
• [PATCH v4 00/14] RISC-V SiFive FU540 support SPL   Pragnesh Patel
  • [PATCH v4 01/14] misc: add driver for the SiFive otp controller   Pragnesh Patel
    • [PATCH v4 01/14] misc: add driver for the SiFive otp controller   Patrick DELAUNAY
      • [PATCH v4 01/14] misc: add driver for the SiFive otp controller   Pragnesh Patel
  • [PATCH v4 02/14] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
    • [PATCH v4 02/14] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Patrick DELAUNAY
      • [PATCH v4 02/14] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
  • [PATCH v4 03/14] riscv: Add _image_binary_end for SPL   Pragnesh Patel
  • [PATCH v4 04/14] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
  • [PATCH v4 05/14] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
  • [PATCH v4 06/14] sifive: fu540: add ddr driver   Pragnesh Patel
  • [PATCH v4 07/14] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
  • [PATCH v4 08/14] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
  • [PATCH v4 09/14] clk: sifive: fu540-prci: Add clock initialization for SPL   Pragnesh Patel
  • [PATCH v4 10/14] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
  • [PATCH v4 11/14] configs: fu540: Add config options for U-boot SPL   Pragnesh Patel
  • [PATCH v4 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Pragnesh Patel
  • [PATCH v4 13/14] sifive: fix palmer's email address   Pragnesh Patel
  • [PATCH v4 14/14] doc: update FU540 RISC-V documentation   Pragnesh Patel
• [PATCH] arm: imx6: configure NoC on i.MX6DQP   Bernhard Messerklinger
• [PATCH v2] arm: imx6: configure NoC on i.MX6DQP   Bernhard Messerklinger
  • [PATCH v2] arm: imx6: configure NoC on i.MX6DQP   Filip Brozović
• [PATCH] spi: nxp-fspi: Add 1us delay to make controller ready for next transaction   Kuldeep Singh
• [PATCH 0/3] clk: Fix ETH initialization on i.MX6Q boards using CCF   Lukasz Majewski
  • [PATCH 1/3] clk: imx6: Add definition for IMX6QDL_CLK_ENET clock   Lukasz Majewski
  • [PATCH 2/3] clk: imx: Add support for pllv3 enet clock   Lukasz Majewski
  • [PATCH 3/3] clk: imx6: Add definition for IMX6QDL_CLK_ENET_REF clock   Lukasz Majewski
• [U-Boot] [PATCH] usb: ehci-mx5: Fix bus enumeration for DM case   Lukasz Majewski
  • [U-Boot] [PATCH] usb: ehci-mx5: Fix bus enumeration for DM case   Marek Vasut
    • [U-Boot] [PATCH] usb: ehci-mx5: Fix bus enumeration for DM case   Lukasz Majewski
      • [U-Boot] [PATCH] usb: ehci-mx5: Fix bus enumeration for DM case   Marek Vasut
• [PATCH] Azure / GitLab: Update Docker image   Tom Rini
  • [PATCH] Azure / GitLab: Update Docker image   Tom Rini
• [PATCH] global_data.h: make <asm-generic/global_data.h> self-contained   Masahiro Yamada
• [PATCH] asm-generic/u-boot.h: make <asm-generic/u-boot.h> self-contained   Masahiro Yamada
• [PATCH] debug_uart.h: make <debug_uart.h> self-contained   Masahiro Yamada
• [PATCH] mmc: make <mmc.h> self-contained   Masahiro Yamada
  • [PATCH] mmc: make <mmc.h> self-contained   Jaehoon Chung
• [PATCH] spl.h: make <spl.h> self-contained   Masahiro Yamada
  • [PATCH] spl.h: make <spl.h> self-contained   Simon Glass
• [PATCH 1/1] README: replace reference to boards.cfg   Heinrich Schuchardt
  • [PATCH 1/1] README: replace reference to boards.cfg   Simon Glass
• [PATCHv2 1/4] kbuild: fixdep: Resync this with v4.17   Tom Rini
  • [PATCHv2 3/4] scripts/Makefile.lib: Restore PCI related warnings to DTC_FLAGS   Tom Rini
    • [PATCHv2 3/4] scripts/Makefile.lib: Restore PCI related warnings to DTC_FLAGS   Masahiro Yamada
  • [PATCHv2 4/4] scripts/Makefile.lib: Re-add -Wno-simple_bus_reg to DTC_FLAGS   Tom Rini
    • [PATCHv2 4/4] scripts/Makefile.lib: Re-add -Wno-simple_bus_reg to DTC_FLAGS   Masahiro Yamada
  • [PATCHv2 1/4] kbuild: fixdep: Resync this with v4.17   Masahiro Yamada
• [PATCHv2 2/4] kbuild: Re-sync DTC flag logic with v4.17   Tom Rini
  • [PATCHv2 2/4] kbuild: Re-sync DTC flag logic with v4.17   Masahiro Yamada
• [PATCH 1/7] misc: Add more -I$(objtree)/$(obj) lines   Tom Rini
  • [PATCH 2/7] mx31pdk: Move CONFIG_SPL_LDSCRIPT to defconfig   Tom Rini
    • [PATCH 2/7] mx31pdk: Move CONFIG_SPL_LDSCRIPT to defconfig   Magnus Lilja
  • [PATCH 3/7] Kconfig: Escape variables to make in default strings   Tom Rini
    • [PATCH 3/7] Kconfig: Escape variables to make in default strings   Masahiro Yamada
      • [PATCH 3/7] Kconfig: Escape variables to make in default strings   Tom Rini
  • [PATCH 4/7] Kconfig: Remove redundant variable sets   Tom Rini
    • [PATCH 4/7] Kconfig: Remove redundant variable sets   Masahiro Yamada
      • [PATCH 4/7] Kconfig: Remove redundant variable sets   Tom Rini
  • [PATCH 5/7] Azure / GitLab / Travis: Add Kconfig unit tests to a job   Tom Rini
    • [PATCH 5/7] Azure / GitLab / Travis: Add Kconfig unit tests to a job   Masahiro Yamada
  • [PATCH 6/7] scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc   Tom Rini
  • [PATCH 7/7] kconfig / kbuild: re-sync with Linux 4.18   Tom Rini
    • [PATCH 7/7] kconfig / kbuild: re-sync with Linux 4.18   Masahiro Yamada
      • [PATCH 7/7] kconfig / kbuild: re-sync with Linux 4.18   Tom Rini
• [PATCH v5 07/16] efi_loader: image_loader: support image authentication   Heinrich Schuchardt
  • [PATCH v5 07/16] efi_loader: image_loader: support image authentication   AKASHI Takahiro
    • [PATCH v5 07/16] efi_loader: image_loader: support image authentication   Heinrich Schuchardt
      • [PATCH v5 07/16] efi_loader: image_loader: support image authentication   AKASHI Takahiro
  • [PATCH v5 07/16] efi_loader: image_loader: support image authentication   Heinrich Schuchardt
    • [PATCH v5 07/16] efi_loader: image_loader: support image authentication   AKASHI Takahiro
• [PATCH] net: phy: marvell: Unify 88E151x series phy_driver   Clemens Gruber
• [RFC PATCH 0/1] Add boot hartid to a Device tree   Atish Patra
  • [RFC PATCH 1/1] riscv: Add boot hartid to Device tree   Atish Patra
    • [RFC PATCH 1/1] riscv: Add boot hartid to Device tree   Ard Biesheuvel
  • [RFC PATCH 0/1] Add boot hartid to a Device tree   Heinrich Schuchardt
    • [RFC PATCH 0/1] Add boot hartid to a Device tree   Ard Biesheuvel
      • [RFC PATCH 0/1] Add boot hartid to a Device tree   Atish Patra
      • [RFC PATCH 0/1] Add boot hartid to a Device tree   Chang, Abner (HPS SW/FW Technologist)
      • [RFC PATCH 0/1] Add boot hartid to a Device tree   Ard Biesheuvel
      • [RFC PATCH 0/1] Add boot hartid to a Device tree   Chang, Abner (HPS SW/FW Technologist)
      • [RFC PATCH 0/1] Add boot hartid to a Device tree   Ard Biesheuvel
• [PATCH 1/1] drivers/rng: add Amlogic hardware RNG driver   Heinrich Schuchardt
  • [PATCH 1/1] drivers/rng: add Amlogic hardware RNG driver   Neil Armstrong
    • [PATCH 1/1] drivers/rng: add Amlogic hardware RNG driver   Heinrich Schuchardt
  • [PATCH 1/1] drivers/rng: add Amlogic hardware RNG driver   Sughosh Ganu
    • [PATCH 1/1] drivers/rng: add Amlogic hardware RNG driver   Heinrich Schuchardt
      • [PATCH 1/1] drivers/rng: add Amlogic hardware RNG driver   Sughosh Ganu
      • [PATCH 1/1] drivers/rng: add Amlogic hardware RNG driver   Heinrich Schuchardt
• [PATCH 0/2] Update reserved memory for simple framebuffer   Michael Trimarchi
  • [PATCH 1/2] common: fdt: Add a function for reserving memory without kernel linear mapping   Michael Trimarchi
    • [PATCH 1/2] common: fdt: Add a function for reserving memory without kernel linear mapping   Simon Glass
      • [PATCH 1/2] common: fdt: Add a function for reserving memory without kernel linear mapping   Michael Nazzareno Trimarchi
  • [PATCH 2/2] video: meson: Use reserving memory function without kernel linear mapping   Michael Trimarchi
    • [PATCH 2/2] video: meson: Use reserving memory function without kernel linear mapping   Simon Glass
• [PATCH] dm: make uclass_find_first_device() return error when no defice is found   Masahiro Yamada
  • [PATCH] dm: make uclass_find_first_device() return error when no defice is found   Simon Glass
    • [PATCH] dm: make uclass_find_first_device() return error when no defice is found   Masahiro Yamada
      • [PATCH] dm: make uclass_find_first_device() return error when no defice is found   Simon Glass
• [PATCH 1/2] board: sama5d3_xplained: Fix SPL DTB read from NAND   Eugen Hristev
• [PATCH 2/2] board: sama5d3_xplained: Fix uboot size when loaded from NAND by SPL   Eugen Hristev
• [PATCH] net: zynq_gem: Add cache flush to zynq_gem_free_pkt   Michal Simek
• [PATCH 0/2] x86: apl: Add support for different number of cores   Wolfgang Wallner
  • [PATCH 2/2] x86: apl: Use cpu_x86_get_count() for cpu_ops.get_count   Wolfgang Wallner
    • [PATCH 2/2] x86: apl: Use cpu_x86_get_count() for cpu_ops.get_count   Bin Meng
  • [PATCH 0/2] x86: apl: Add support for different number of cores   Bin Meng
• [PATCH 1/2] x86: cpu_x86: Make cpu_x86_get_count() non-static   Wolfgang Wallner
  • [PATCH 1/2] x86: cpu_x86: Make cpu_x86_get_count() non-static   Bin Meng
• [PATCH] configs: stm32mp1: Resync with savedefconfig   Patrick Delaunay
• [PATCH] ARM: zynq: Remove single comment about QSPI   Michal Simek
  • [PATCH] ARM: zynq: Remove single comment about QSPI   Michal Simek
• [PATCH 1/4] nand: raw: Do not free xnand structure   Michal Simek
  • [PATCH 2/4] nand: raw: zynq: Do not try to probe driver if nand flash is disabled   Michal Simek
  • [PATCH 3/4] ARM: zynq: Do not report NOR flash detection failure   Michal Simek
  • [PATCH 4/4] ARM: zynq: Enable DM for CFI NOR flash   Michal Simek
• [PATCH] env: Make mmc as default option for CONFIG_ENV_FAT_INTERFACE   Michal Simek
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Kristian Amlie
  • [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Tom Rini
• Fixing low-speed USB keyboard detection   Stefan
  • Fixing low-speed USB keyboard detection   Soeren Moch
    • Fixing low-speed USB keyboard detection   Marek Vasut
      • Fixing low-speed USB keyboard detection   Soeren Moch
      • Fixing low-speed USB keyboard detection   Stefan
• [PATCH] doc: Makefile: remove target refcheckdocs   Patrick Delaunay
  • [PATCH] doc: Makefile: remove target refcheckdocs   Heinrich Schuchardt
    • [PATCH] doc: Makefile: remove target refcheckdocs   Tom Rini
      • [PATCH] doc: Makefile: remove target refcheckdocs   Patrick DELAUNAY
• [PATCH v3] doc: add board documentation for stm32mp1   Patrick Delaunay
• [PATCH] tiny-printf: revert patch to fix spl eth boot   Moses Christopher
• [PATCH] board: novtech: meerkat96: use correct mmc driver   Tom Rini
• [PATCH 1/1] scripts: add documentation-file-ref-check   Heinrich Schuchardt
  • [PATCH 1/1] scripts: add documentation-file-ref-check   Patrick DELAUNAY
    • [PATCH 1/1] scripts: add documentation-file-ref-check   Heinrich Schuchardt
• [PATCH 1/1] doc: fix references to driver-model   Heinrich Schuchardt
  • [PATCH 1/1] doc: fix references to driver-model   Simon Glass
  • [PATCH 1/1] doc: fix references to driver-model   Patrick DELAUNAY
    • [PATCH 1/1] doc: fix references to driver-model   Patrick DELAUNAY
      • [PATCH 1/1] doc: fix references to driver-model   Heinrich Schuchardt
• [PATCH 1/1] Kconfig: fix typos in CMD_BEDBUG description   Heinrich Schuchardt
  • [PATCH 1/1] Kconfig: fix typos in CMD_BEDBUG description   Simon Glass
  • [PATCH 1/1] Kconfig: fix typos in CMD_BEDBUG description   Patrick DELAUNAY
• [PATCH 1/1] include/ata.h: remove invalid links   Heinrich Schuchardt
  • [PATCH 1/1] include/ata.h: remove invalid links   Tom Rini
    • [PATCH 1/1] include/ata.h: remove invalid links   Heinrich Schuchardt
      • [PATCH 1/1] include/ata.h: remove invalid links   Tom Rini
      • [PATCH 1/1] include/ata.h: remove invalid links   Heinrich Schuchardt
• [PATCH] kbuild: remove unused dtc-version.sh script   Masahiro Yamada
• [PATCH] arm: mvebu: update RTC values for PCIe memory wrappers   Chris Packham
  • [PATCH] arm: mvebu: update RTC values for PCIe memory wrappers   Baruch Siach
    • [PATCH] arm: mvebu: update RTC values for PCIe memory wrappers   Chris Packham
      • [PATCH] arm: mvebu: update RTC values for PCIe memory wrappers   Chris Packham
• [PATCH v2 1/1] include/ata.h: remove invalid links   Heinrich Schuchardt
• pull request of u-boot-fsl-mpc85xx   Priyanka Jain
  • pull request of u-boot-fsl-mpc85xx   Tom Rini
• [v4 1/4] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"   Priyanka Jain
• [PATCH v6 00/16] efi_loader: add secure boot support   AKASHI Takahiro
  • [PATCH v6 01/16] efi_loader: add CONFIG_EFI_SECURE_BOOT config option   AKASHI Takahiro
  • [PATCH v6 02/16] efi_loader: add signature verification functions   AKASHI Takahiro
  • [PATCH v6 03/16] efi_loader: add signature database parser   AKASHI Takahiro
  • [PATCH v6 04/16] efi_loader: variable: support variable authentication   AKASHI Takahiro
  • [PATCH v6 05/16] efi_loader: variable: add secure boot state transition   AKASHI Takahiro
  • [PATCH v6 06/16] efi_loader: variable: add VendorKeys variable   AKASHI Takahiro
  • [PATCH v6 07/16] efi_loader: image_loader: support image authentication   AKASHI Takahiro
  • [PATCH v6 08/16] efi_loader: set up secure boot   AKASHI Takahiro
  • [PATCH v6 09/16] cmd: env: use appropriate guid for authenticated UEFI variable   AKASHI Takahiro
  • [PATCH v6 10/16] cmd: env: add "-at" option to "env set -e" command   AKASHI Takahiro
  • [PATCH v6 11/16] cmd: efidebug: add "test bootmgr" sub-command   AKASHI Takahiro
  • [PATCH v6 12/16] efi_loader, pytest: set up secure boot environment   AKASHI Takahiro
  • [PATCH v6 13/16] efi_loader, pytest: add UEFI secure boot tests (authenticated variables)   AKASHI Takahiro
  • [PATCH v6 14/16] efi_loader, pytest: add UEFI secure boot tests (image)   AKASHI Takahiro
  • [PATCH v6 15/16] sandbox: add extra configurations for UEFI and related tests   AKASHI Takahiro
  • [PATCH v6 16/16] travis: add packages for UEFI secure boot test   AKASHI Takahiro
    • [PATCH v6 16/16] travis: add packages for UEFI secure boot test   Tom Rini
      • [PATCH v6 16/16] travis: add packages for UEFI secure boot test   AKASHI Takahiro
• [PATCH 1/1] ata: sort ATA commands   Heinrich Schuchardt
• [PATCH 1/1] cmd: fat: remove unused includes   Heinrich Schuchardt
  • [PATCH 1/1] cmd: fat: remove unused includes   Simon Glass
• [PATCH v2] arm: mvebu: update RTC values for PCIe memory wrappers   Chris Packham
  • [PATCH v2] arm: mvebu: update RTC values for PCIe memory wrappers   Stefan Roese
• [PATCH 1/1] block: ide: use definitions from include/libata.h   Heinrich Schuchardt
• [PATCH v3 00/11] Add Support for eMMC boot in AM65x and J721e   Faiz Abbas
  • [PATCH v3 01/11] mmc: Add a saved_clock member   Faiz Abbas
  • [PATCH v3 02/11] mmc: Add a deferred_probe() API   Faiz Abbas
  • [PATCH v3 03/11] sdhci: Add sdhci_deferred_probe() API   Faiz Abbas
  • [PATCH v3 04/11] mmc: Merge SD_LEGACY and MMC_LEGACY bus modes   Faiz Abbas
  • [PATCH v3 05/11] mmc: am654_sdhci: Update output tap delay writes   Faiz Abbas
  • [PATCH v3 06/11] mmc: am654_sdhci: Implement workaround for card detect   Faiz Abbas
  • [PATCH v3 07/11] spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementation   Faiz Abbas
  • [PATCH v3 08/11] arm: K3: sysfw-loader: Add a config_pm_pre_callback()   Faiz Abbas
  • [PATCH v3 09/11] arm: dts: k3-j721e-r5-common-proc-board: Use unique names for dummy clocks   Faiz Abbas
  • [PATCH v3 10/11] configs: am65x_evm: Add CONFIG_SUPPORT_EMMC_BOOT   Faiz Abbas
  • [PATCH v3 11/11] configs: j721e_evm: Add Support for eMMC boot   Faiz Abbas
  • [PATCH v3 00/11] Add Support for eMMC boot in AM65x and J721e   Jaehoon Chung
• Status of "Refactor the architecture parts of mt7628" series?   Mauro Condarelli
• [PATCH v1] imx: Makefile: added missing ahab.o   Oliver Graute
  • [PATCH v1] imx: Makefile: added missing ahab.o   Fabio Estevam
    • [PATCH v1] imx: Makefile: added missing ahab.o   Oliver Graute
• [PATCH 1/2] configs: migrate CONFIG_SET_DFU_ALT_INFO to defconfigs   Patrick Delaunay
  • [PATCH 1/2] configs: migrate CONFIG_SET_DFU_ALT_INFO to defconfigs   Lukasz Majewski
    • [PATCH 1/2] configs: migrate CONFIG_SET_DFU_ALT_INFO to defconfigs   Jaehoon Chung
• [PATCH 2/2] configs: migrate CONFIG_SYS_MTDPARTS_RUNTIME to defconfigs   Patrick Delaunay
• [PATCH v2 0/2] Add command to display or save Linux PStore dumps   Frédéric Danis
  • [PATCH v2 1/2] cmd: Add command to display or save Linux PStore dumps   Frédéric Danis
  • [PATCH v2 2/2] test: Add PStore command tests   Frédéric Danis
• [PATCH] stm32mp1: add 800 MHz profile support   Patrick Delaunay
• [PATCH] ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1   Patrick Delaunay
• [PATCH] ARM: zynq: Do not include full zynq-7000.dtsi to cse-nor configuration   Michal Simek
• [PATCH v2 0/4] ARM: zynq: Switch to CFI DM driver   Michal Simek
  • [PATCH v2 1/4] nand: raw: Do not free xnand structure   Michal Simek
  • [PATCH v2 2/4] nand: raw: zynq: Do not try to probe driver if nand flash is disabled   Michal Simek
  • [PATCH v2 3/4] ARM: zynq: Do not report NOR flash detection failure   Michal Simek
  • [PATCH v2 4/4] ARM: zynq: Enable DM for CFI NOR flash   Michal Simek
• [cmd] "env import" command behaviour observation   Adarsh Babu Kalepalli
  • [cmd] "env import" command behaviour observation   Wolfgang Denk
• [PATCH] lx2160a : Remove default VID setting   Meenakshi Aggarwal
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Lukasz Majewski
  • [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Tom Rini
  • [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
    • [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Tom Rini
      • [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
• [PATCH 0/4] imx: Fixes for i.MX53 based HSC|DDC boards   Lukasz Majewski
  • [PATCH 2/4] dts: imx: Add fixed-link property to HSC and DDC (imx53) devices   Lukasz Majewski
  • [PATCH 3/4] config: imx: Enable CONFIG_PHY_FIXED on HSC and DDC i.MX53 boards   Lukasz Majewski
  • [PATCH 4/4] imx: pmic: Set proper pmic name for iMX53 HSC|DDC boards   Lukasz Majewski
    • [PATCH 4/4] imx: pmic: Set proper pmic name for iMX53 HSC|DDC boards   Jaehoon Chung
• [PATCH 1/4] config: cosmetic: Cleanup of imx53 - HSC and DDC config file   Lukasz Majewski
• [PATCH v2] imx: Makefile: added missing ahab.o   Oliver Graute
  • [PATCH v2] imx: Makefile: added missing ahab.o   Fabio Estevam
• [PATCH 00/15] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
  • [PATCH 02/15] spi: set mode bits for "spi-rx-dtr" and "spi-tx-dtr"   Pratyush Yadav
  • [PATCH 03/15] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
  • [PATCH 04/15] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
  • [PATCH 07/15] mtd: spi-nor-core: Add a ->setup() hook   Pratyush Yadav
  • [PATCH 10/15] mtd: spi-nor-core: Add support for DTR protocol   Pratyush Yadav
  • [PATCH 11/15] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH 01/15] dt-bindings: spi: allow expressing DTR capability   Pratyush Yadav
• [PATCH 05/15] spi: cadence-qspi: Do not calibrate when device tree sets read delay   Pratyush Yadav
• [PATCH 06/15] spi: cadence-qspi: Add support for octal DTR flashes   Pratyush Yadav
• [PATCH 08/15] mtd: spi-nor-core: Move SFDP related declarations to top   Pratyush Yadav
• [PATCH 09/15] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH 12/15] mtd: spi-nor-core: Parse xSPI Profile 1.0 table   Pratyush Yadav
• [PATCH 13/15] mtd: spi-nor-core: Use Read SR dummy cycle and address width from SFDP   Pratyush Yadav
• [PATCH 14/15] mtd: spi-nor-core: Enable octal DTR mode when possible   Pratyush Yadav
• [PATCH 15/15] mtd: spi-nor-core: Add support for Cypress Semper flash   Pratyush Yadav
• [NOT FOR MERGE PATCH 16/15] arm: dts: k3-j721e: Update OSPI settings for octal DTR mode   Pratyush Yadav
• [ANN] U-Boot v2020.04-rc3 released   Tom Rini
  • [ANN] U-Boot v2020.04-rc3 released   Andy Shevchenko
    • [ANN] U-Boot v2020.04-rc3 released   Bin Meng
      • [ANN] U-Boot v2020.04-rc3 released   Andy Shevchenko
    • [ANN] U-Boot v2020.04-rc3 released   Tom Rini
      • [ANN] U-Boot v2020.04-rc3 released   Lukasz Majewski
      • [ANN] U-Boot v2020.04-rc3 released   Andy Shevchenko
• [PATCH] raspberrypi: reserve first two pages in efi memory map   kevans at FreeBSD.org
  • [PATCH] raspberrypi: reserve first two pages in efi memory map   Matthias Brugger
    • [PATCH] raspberrypi: reserve first two pages in efi memory map   Kyle Evans
      • [PATCH] raspberrypi: reserve first two pages in efi memory map   Kyle Evans
• [U-Boot] [PATCH v2 08/10] bootstage: Correct relocation algorithm   Simon Glass
• [PATCH] watchdog: Don't select CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG at the same time   Christophe Leroy
  • [PATCH] watchdog: Don't select CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG at the same time   Stefan Roese
  • [PATCH] watchdog: Don't select CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG at the same time   Tom Rini
• [cmd]:"env edit" vs "env set",do we need both options for "env" command ??   Adarsh Babu Kalepalli
  • [cmd]:"env edit" vs "env set", do we need both options for "env" command ??   Wolfgang Denk
• [PATCH 00/18] i.MXRT1050 add LCDIF support   Giulio Benetti
  • [PATCH 02/18] clk: imx: imxrt1050-clk: fix typo in clock name "video:"   Giulio Benetti
  • [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Giulio Benetti
    • [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Fabio Estevam
      • [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Giulio Benetti
      • [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Fabio Estevam
      • [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Giulio Benetti
      • [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Fabio Estevam
  • [PATCH 04/18] videomodes: add helper function to convert from ctfb to display_timing   Giulio Benetti
  • [PATCH 05/18] sunxi: display: use common video_ctfb_mode_to_display_timing()   Giulio Benetti
  • [PATCH 06/18] video: mxsfb: add support for DM CLK   Giulio Benetti
  • [PATCH 07/18] video: mxsfb: add support for i.MXRT   Giulio Benetti
  • [PATCH 08/18] video: mxsfb: refactor for using display_timings   Giulio Benetti
  • [PATCH 09/18] video: mxsfb: enable setting HSYNC negative polarity   Giulio Benetti
  • [PATCH 10/18] video: mxsfb: enable setting VSYNC negative polarity   Giulio Benetti
  • [PATCH 11/18] video: mxsfb: enable setting PIXDATA on negative edge   Giulio Benetti
  • [PATCH 12/18] video: mxsfb: enable setting ENABLE negative polarity   Giulio Benetti
  • [PATCH 13/18] imxrt1050_evk: add 16bpp video support if video layer enabled   Giulio Benetti
  • [PATCH 14/18] ARM: dts: i.mxrt1050: add lcdif node   Giulio Benetti
  • [PATCH 15/18] ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux   Giulio Benetti
  • [PATCH 00/18] i.MXRT1050 add LCDIF support   Giulio Benetti
• [PATCH 01/18] clk: imx: pllv3: add enable_bit   Giulio Benetti
• [PATCH 16/18] arch: arm: dts: imxrt1050-evk: add lcdif node   Giulio Benetti
  • [PATCH 18/18] configs: imxrt1050-evk: temporary disable DCACHE   Giulio Benetti
• [PATCH 17/18] configs: imxrt1050-evk: enable video support/console   Giulio Benetti
• [PATCH] configs: am335x_evm: Use default log level   Sam Protsenko
  • [PATCH] configs: am335x_evm: Use default log level   Lokesh Vutla
    • [PATCH] configs: am335x_evm: Use default log level   Tom Rini
• [PATCH] configs: am335x_evm: Enable DFU over TFTP support   Sam Protsenko
• [PATCH] configs: am335x_evm: Enable Fastboot   Sam Protsenko
• [PATCH] rk3399: Add four clocks to clock driver needed by framebuffer   Wolfram Joost
• Pull request for UEFI sub-system for efi-2020-04-rc4   Heinrich Schuchardt
  • Pull request for UEFI sub-system for efi-2020-04-rc4   Tom Rini
• [U-Boot-Custodians] RFC: Migration target date for DM_ETH   Christophe Leroy
  • [U-Boot-Custodians] RFC: Migration target date for DM_ETH   Heinrich Schuchardt
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Ley Foon Tan
• [PATCH 1/1] doc: driver-model: there is no UCLASS_ETHERNET   Heinrich Schuchardt
  • [PATCH 1/1] doc: driver-model: there is no UCLASS_ETHERNET   Simon Glass
• [PATCH v5 0/6] log: syslog logging driver   Heinrich Schuchardt
  • [PATCH v5 1/6] log: correct CONFIG_LOG_TEST prerequisites   Heinrich Schuchardt
  • [PATCH v5 2/6] log: syslog driver   Heinrich Schuchardt
    • [PATCH v5 2/6] log: syslog driver   Simon Glass
  • [PATCH v5 3/6] log: output for CONFIG_LOG=n   Heinrich Schuchardt
  • [PATCH v5 4/6] test: log functions with CONFIG_LOG=n   Heinrich Schuchardt
  • [PATCH v5 5/6] test: log: test syslog logging driver   Heinrich Schuchardt
    • [PATCH v5 5/6] test: log: test syslog logging driver   Simon Glass
  • [PATCH v5 6/6] configs: sandbox: enable LOG_SYSLOG   Heinrich Schuchardt
• [PATCH 1/2] rpi: add an RPi Kconfig to configure size of initial page reservation   kevans at FreeBSD.org
  • [PATCH 1/2] rpi: Kconfig option for initial page reservation   kevans at FreeBSD.org
  • [PATCH 1/2] rpi: add an RPi Kconfig to configure size of initial page reservation   Kyle Evans
• [PATCH 2/2] rpi: use the newly-added RPI_EFI_NR_SPIN_PAGES   kevans at FreeBSD.org
• sunxi: Pine A64 LTS crashes for make pine64-lts_defconfig + CONFIG_LOG   Heinrich Schuchardt
• [PATCH][v4 1/6] board: tbs2910: disable loadb and loads commands   Denis 'GNUtoo' Carikli
  • [PATCH][v4 2/6] board: tbs2910: disable CONFIG_GZIP   Denis 'GNUtoo' Carikli
  • [PATCH][v4 3/6] board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfig   Denis 'GNUtoo' Carikli
  • [PATCH][v4 4/6] board: tbs2910: enable CONFIG_DISTRO_DEFAULTS   Denis 'GNUtoo' Carikli
  • [PATCH][v4 5/6] board: tbs2910: Enable distro_boot support.   Denis 'GNUtoo' Carikli
  • [PATCH][v4 6/6] board: tbs2910: add documentation   Denis 'GNUtoo' Carikli
• [GIT PULL] TI changes for v2020.04-rc4   Lokesh Vutla
  • [GIT PULL] TI changes for v2020.04-rc4   Tom Rini
• [PATCH v2 0/8] Cortina Access Drivers Package 2   Alex Nemirovsky
  • [PATCH v2 2/8] board: presidio-asic: Add eMMC board support   Alex Nemirovsky
  • [PATCH v2 3/8] i2c: i2c-cortina: added CAxxxx I2C support   Alex Nemirovsky
  • [PATCH v2 4/8] board: presidio-asic: Add I2C support   Alex Nemirovsky
  • [PATCH v2 5/8] led: led_cortina: Add CAxxx LED support   Alex Nemirovsky
  • [PATCH v2 6/8] board: presidio: add LED support   Alex Nemirovsky
  • [PATCH v2 7/8] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
  • [PATCH v2 8/8] board: presidio-asic: Add SPI NAND and NOR support   Alex Nemirovsky
• [PATCH v2 1/8] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs   Alex Nemirovsky
• [PATCH] common/board_f.c: use #ifdefs a little more consistently   Rasmus Villemoes
  • [PATCH] common/board_f.c: use #ifdefs a little more consistently   Simon Glass
    • [PATCH] common/board_f.c: use #ifdefs a little more consistently   Rasmus Villemoes
      • [PATCH] common/board_f.c: use #ifdefs a little more consistently   Tom Rini
      • [PATCH] common/board_f.c: use #ifdefs a little more consistently   Rasmus Villemoes
      • [PATCH] common/board_f.c: use #ifdefs a little more consistently   Tom Rini
      • caching BLOBLISTT_SPL_HANDOFF (was Re: [PATCH] common/board_f.c: use #ifdefs a little more consistently)   Rasmus Villemoes
• Starting u-boot in USB otg mode   mRbinG
  • Starting u-boot in USB otg mode   mRbinG
• [U-Boot] [PATCH 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Jonas Smedegaard
  • [U-Boot] [PATCH 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Lukasz Majewski
• [PATCH v2 0/6] arm64: meson: add libretech-pc support   Jerome Brunet
  • [PATCH v2 2/6] mmc: meson-gx: enable input clocks   Jerome Brunet
  • [PATCH v2 3/6] clk: meson: reset mmc clock on probe   Jerome Brunet
  • [PATCH v2 4/6] arm64: dts: meson: sync dt and bindings from v5.6-rc2   Jerome Brunet
  • [PATCH v2 5/6] arm64: dts: meson: import libretech-pc from linux v5.6-rc2   Jerome Brunet
  • [PATCH v2 6/6] arm64: dts: meson: add libretech-pc support   Jerome Brunet
• [PATCH v2 1/6] dt-bindings: leds: import common led bindings from linux v5.5   Jerome Brunet
• [PATCH] ARM: uniphier: enable CONFIG_MMC_HS400_SUPPORT for uniphier_v8_defconfig   Masahiro Yamada
  • [PATCH] ARM: uniphier: enable CONFIG_MMC_HS400_SUPPORT for uniphier_v8_defconfig   Masahiro Yamada
• [PATCH 0/4] remove (more) env callback code for SPL   Rasmus Villemoes
  • [PATCH 1/4] env: remove callback.o for an SPL build   Rasmus Villemoes
    • [PATCH 1/4] env: remove callback.o for an SPL build   Simon Glass
  • [PATCH 2/4] lib/hashtable.c: create helper for calling env_entry::callback   Rasmus Villemoes
    • [PATCH 2/4] lib/hashtable.c: create helper for calling env_entry::callback   Simon Glass
  • [PATCH 3/4] lib/hashtable.c: don't test ->callback in SPL   Rasmus Villemoes
    • [PATCH 3/4] lib/hashtable.c: don't test ->callback in SPL   Simon Glass
  • [PATCH 4/4] make env_entry::callback conditional on !CONFIG_SPL_BUILD   Rasmus Villemoes
    • [PATCH 4/4] make env_entry::callback conditional on !CONFIG_SPL_BUILD   Simon Glass
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Andy Shevchenko
  • [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Simon Glass
    • [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Andy Shevchenko
• [PATCH v1 1/3] dm: serial: Add clock member to struct serial_device_info   Andy Shevchenko
  • [PATCH v1 1/3] dm: serial: Add clock member to struct serial_device_info   Simon Glass
• [PATCH v1 2/3] serial: ns16550: Provide UART base clock speed in ->getinfo()   Andy Shevchenko
  • [PATCH v1 2/3] serial: ns16550: Provide UART base clock speed in ->getinfo()   Simon Glass
• [PATCH v1 3/3] x86: acpi: Let OS know that console already had been initialized   Andy Shevchenko
• [PATCH 0/2] block: ide: remove duplicate defines form include/ata.h   Heinrich Schuchardt
  • [PATCH 2/2] ide: remove duplicate defines form include/ata.h   Heinrich Schuchardt
    • [PATCH 2/2] ide: remove duplicate defines form include/ata.h   Simon Glass
• [PATCH 1/2] block: ide: use definitions from include/libata.h   Heinrich Schuchardt
  • [PATCH 1/2] block: ide: use definitions from include/libata.h   Simon Glass
• [PATCH 1/2] mx7dsabresd: Add myself as maintainer   Fabio Estevam
  • [PATCH 2/2] imx8qxp_mek: Add myself as maintainer   Fabio Estevam
• [v1 PATCH 0/1] Add boot hartid to a Device tree   Atish Patra
  • [v1 PATCH 1/1] riscv: Add boot hartid to Device tree   Atish Patra
• [PATCH] cmd: efidebug: fix a failure of "boot rm" sub-command   AKASHI Takahiro
  • [PATCH] cmd: efidebug: fix a failure of "boot rm" sub-command   Heinrich Schuchardt
• [PATCH] efi_loader: file: set a backend block device for file operations   AKASHI Takahiro
  • [PATCH] efi_loader: file: set a backend block device for file operations   Heinrich Schuchardt
• [PATCH] common: update_tftp: remove unnecessary build check   AKASHI Takahiro
  • [PATCH] common: update_tftp: remove unnecessary build check   Heinrich Schuchardt
• [PATCH] patman: Apply the cc limit to the cover letter also   Simon Glass
• [PATCH] x86: Cache write back at 32-bit entry point   Park, Aiden
  • [PATCH] x86: Cache write back at 32-bit entry point   Bin Meng
    • [PATCH] x86: Cache write back at 32-bit entry point   Park, Aiden
• [PATCH] net: zynq_gem: Use ulong instead of u32 data type   Michal Simek
• [PATCH] versal: drivers: clk: Fix invalid clock name queries   Michal Simek
• [PATCH] mtd: nand: Fix on-die ecc issues in arasan_nfc driver   Michal Simek
• [PATCH] board: ti: k3: Update the sysfw image gen repository   Lokesh Vutla
• [PATCH] firmware: tisci: Drop all deprecated messages   Lokesh Vutla
• [PATCH] dma: ti: k3-udma: Mark flow id as valid parameter for RX channel config   Lokesh Vutla
• [PATCH 1/3] ARM: dts: uniphier: rename DT nodes to follow json-schema   Masahiro Yamada
  • [PATCH 3/3] ARM: dts: uniphier: remove U-Boot own EEPROM compatible and property   Masahiro Yamada
    • [PATCH 3/3] ARM: dts: uniphier: remove U-Boot own EEPROM compatible and property   Masahiro Yamada
  • [PATCH 1/3] ARM: dts: uniphier: rename DT nodes to follow json-schema   Masahiro Yamada
• [PATCH 2/3] ARM: dts: uniphier: add reset-names to NAND controller node   Masahiro Yamada
  • [PATCH 2/3] ARM: dts: uniphier: add reset-names to NAND controller node   Masahiro Yamada
• [PATCH 1/2] misc: i2c_eeprom: remove pagewidth field from i2c_eeprom   Masahiro Yamada
  • [PATCH 2/2] misc: i2c_eeprom: store pagesize instead of pagewidth in i2c_eeprom_drv_data   Masahiro Yamada
• [PATCH 0/7] doc: Fix some errors pointed out by 'make refcheckdocs'   Patrick Delaunay
• [PATCH 1/7] README: update reference to *.README   Patrick Delaunay
  • [PATCH 1/7] README: update reference to *.README   Heinrich Schuchardt
• [PATCH 2/7] Kconfig: update reference to README.x86   Patrick Delaunay
• [PATCH 3/7] doc: update reference to README.imximage   Patrick Delaunay
• [PATCH 4/7] doc: update reference to README.imx8image   Patrick Delaunay
• [PATCH 5/7] doc: update reference to README.board   Patrick Delaunay
• [PATCH 6/7] doc: device-tree-bindings: update reference to binding directory   Patrick Delaunay
• [PATCH 7/7] arm: imx: update reference to README.mxc_hab   Patrick Delaunay
• [PATCH v2 1/1] scripts: add documentation-file-ref-check   Heinrich Schuchardt
• [PATCH v5 00/33] riscv: Add Sipeed Maix support   Sean Anderson
  • [PATCH v5 01/33] clk: Always use the supplied struct clk   Sean Anderson
  • [PATCH v5 02/33] clk: Check that ops of composite clock components exist before calling   Sean Anderson
  • [PATCH v5 03/33] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
  • [PATCH v5 04/33] clk: Add functions to register CCF clock structs   Sean Anderson
  • [PATCH v5 05/33] clk: Add K210 pll support   Sean Anderson
  • [PATCH v5 06/33] clk: Add a bypass clock for K210   Sean Anderson
  • [PATCH v5 07/33] clk: Add K210 clock support   Sean Anderson
  • [PATCH v5 08/33] doc: Fix typo in FIT documentation   Sean Anderson
  • [PATCH v5 09/33] dm: Add support for simple-pm-bus   Sean Anderson
  • [PATCH v5 10/33] dm: Fix error handling for dev_read_addr_ptr   Sean Anderson
  • [PATCH v5 11/33] reset: Add generic reset driver   Sean Anderson
  • [PATCH v5 12/33] lib: Always set errno in hcreate_r   Sean Anderson
  • [PATCH v5 13/33] pinctrl: Add support for Kendryte K210 FPIOA   Sean Anderson
  • [PATCH v5 14/33] gpio: sifive: Use generic reg read function   Sean Anderson
  • [PATCH v5 15/33] gpio: dw: Fix warnings about casting int to pointer   Sean Anderson
  • [PATCH v5 16/33] gpio: dw: Add a trailing underscore to generated name   Sean Anderson
  • [PATCH v5 17/33] gpio: dw: Return output value when direction is out   Sean Anderson
  • [PATCH v5 18/33] led: gpio: Default to using node name if label is absent   Sean Anderson
  • [PATCH v5 19/33] spi: dw: Add device tree properties for fields in CTRL1   Sean Anderson
  • [PATCH v5 20/33] spi: dw: Rename "cs-gpio" to "cs-gpios"   Sean Anderson
  • [PATCH v5 21/33] spi: dw: Use generic function to read reg address   Sean Anderson
  • [PATCH v5 22/33] spi: dw: Speed up transfer loops   Sean Anderson
  • [PATCH v5 23/33] spi: dw: Properly set rx_end when not recieving   Sean Anderson
    • [PATCH v5 23/33] spi: dw: Properly set rx_end when not recieving   Sean Anderson
  • [PATCH v5 24/33] spi: dw: Add mem_ops   Sean Anderson
  • [PATCH v5 25/33] wdt: Move asm/utils.h to log2.h   Sean Anderson
    • [PATCH v5 25/33] wdt: Move asm/utils.h to log2.h   Marek Vasut
      • [PATCH v5 25/33] wdt: Move asm/utils.h to log2.h   Sean Anderson
      • [PATCH v5 25/33] wdt: Move asm/utils.h to log2.h   Marek Vasut
  • [PATCH v5 26/33] riscv: Add headers for asm/global_data.h   Sean Anderson
  • [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Sean Anderson
  • [PATCH v5 28/33] riscv: Add option to support RISC-V privileged spec 1.9   Sean Anderson
  • [PATCH v5 29/33] riscv: Allow use of reset drivers   Sean Anderson
  • [PATCH v5 30/33] riscv: Try to get cpu frequency from a "clocks" node if it exists   Sean Anderson
  • [PATCH v5 31/33] riscv: Enable cpu clock if it is present   Sean Anderson
  • [PATCH v5 32/33] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
  • [PATCH v5 33/33] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH] serial: mcfuart: fix uart port index   Angelo Dureghello
• [PATCH] serial: mcfuart: renaming to a more appropriate name   Angelo Dureghello
• [GIT PULL] UniPhier SoC updates for v2020.04 (3rd)   Masahiro Yamada
• Pull request for UEFI sub-system for efi-2020-04-rc4 (2)   Heinrich Schuchardt
• [PATCH v2 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Jonas Smedegaard
  • [PATCH v2 2/2] sun50i: a64: A64-Teres-I board detect builtin keyboard   Jonas Smedegaard
• wrong email alias for Maxime Ripard   Jonas Smedegaard