September 2017 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Sep 1 00:10:46 UTC 2017
Ending: Sat Sep 30 23:28:22 UTC 2017
Messages: 3733

• [U-Boot] [PATCH v3 1/8] spi: add support of SPI flash commands   Wenyou.Yang at microchip.com
• [U-Boot] do_nand_status( ) patch   masonccyang at mxic.com.tw
• [U-Boot] [PATCH 03/23] efi_loader: support 16 protocols per efi_object   Heinrich Schuchardt
  • [U-Boot] [PATCH 03/23] efi_loader: support 16 protocols per efi_object   Alexander Graf
  • [U-Boot] [PATCH 03/23] efi_loader: support 16 protocols per efi_object   Rob Clark
    • [U-Boot] [PATCH 03/23] efi_loader: support 16 protocols per efi_object   Alexander Graf
• [U-Boot] Altera Arria10 socfpga image usage   Andre Renaud
• [U-Boot] [PATCH 2/2] ARM: Add a new arch + board for QEMU's 'virt' machine   Bin Meng
• [U-Boot] [PATCH 1/1] armv8: ls1012a: Memory Map modification of kernel, env   Bhaskar Upadhaya
  • [U-Boot] [PATCH 1/1] armv8: ls1012a: Memory Map modification of kernel, env   York Sun
• [U-Boot] [UBOOT] [PATCH] cmd: usb: ignore block devices under mass storage device   Lothar Waßmann
  • [U-Boot] [UBOOT] [PATCH] cmd: usb: ignore block devices under mass storage device   Suneel Garapati
  • [U-Boot] [UBOOT] [PATCH] cmd: usb: ignore block devices under mass storage device   Suneel Garapati
• [U-Boot] [U-BOOT][PATCH] drivers: ahci: write upper 32 bits for clb and fis registers   Suneel Garapati
• [U-Boot] [PATCH] misc: Kconfig: Add SPL_I2C_EEPROM option   Yang, Wenyou
  • [U-Boot] [PATCH] misc: Kconfig: Add SPL_I2C_EEPROM option   Tom Rini
• [U-Boot] [PATCH 0/2] misc: i2c_eeprom: Add compatibles   Yang, Wenyou
• [U-Boot] [PATCH 0/7] board: atmel: Convert to support DM_VIDEO   Yang, Wenyou
• [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial   Marek Vasut
  • [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial   Łukasz Majewski
    • [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial   Marek Vasut
      • [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial   Łukasz Majewski
  • [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial   Sam Protsenko
    • [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial   Sam Protsenko
• [U-Boot] [PATCH 1/2] armv8: layerscape: Allocate 66 MB DDR for secure memory   Sumit Garg
  • [U-Boot] [PATCH 2/2] armv8: sec_firmware: Add support for loadables in FIT   Sumit Garg
• [U-Boot] [PATCH v4 0/3] board: atmel: Set the ethernet mac address from eeprom   Wenyou Yang
  • [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder   Wenyou Yang
    • [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder   Simon Glass
    • [U-Boot] [U-Boot, v4, 1/3] board: atmel: Create board/$(VENDOR)/common folder   Tom Rini
  • [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address   Wenyou Yang
    • [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address   Simon Glass
    • [U-Boot] [U-Boot, v4, 2/3] board: sama5d2_xplained: Replace code to set mac address   Tom Rini
  • [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom   Wenyou Yang
    • [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom   Simon Glass
    • [U-Boot] [U-Boot, v4, 3/3] board: sama5d4_xplained: Set mac address from eeprom   Tom Rini
• [U-Boot] [PATCH] arm64: ls1043ardb: Add distro secure boot support   Sumit Garg
• [U-Boot] [PATCH v3] patman: add support for omitting bouncing addresses   Chris Packham
  • [U-Boot] [PATCH v3] patman: add support for omitting bouncing addresses   Dr. Philipp Tomsich
    • [U-Boot] [PATCH v3] patman: add support for omitting bouncing addresses   sjg at google.com
• [U-Boot] [PATCH 1/2] PCI: Add driver for a 'pci-host-ecam-generic' host controller   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/2] x86: ich-spi: Remove useless assignment in ich_spi_xfer()   Bin Meng
• [U-Boot] [PATCH 2/2] x86: ich-spi: Clear atomic preop only when SPI settings are not locked   Bin Meng
• [U-Boot] [PATCH] x86: baytrail: acpi: Add full reset bit to the reset register value in FADT   Bin Meng
• [U-Boot] [PATCH 1/3] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5   Sekhar Nori
  • [U-Boot] [PATCH 1/3] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5   Adam Ford
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Hannes Schmelzer
  • [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Jagan Teki
    • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Hannes Schmelzer
      • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Hannes Schmelzer
      • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Clément Péron
      • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Clément Péron
      • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Hannes Schmelzer
      • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
      • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
      • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Clément Péron
      • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Hannes Schmelzer
      • [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
• [U-Boot] [PATCH v2 1/1] usb: gadget: g_dnl: Sync internal SN variable with env   Sam Protsenko
  • [U-Boot] [PATCH v2 1/1] usb: gadget: g_dnl: Sync internal SN variable with env   Sam Protsenko
• [U-Boot] [PATCH] sunxi: Change SUNXI_GMAC to SUN7I_GMAC in sources   Mark Kettenis
  • [U-Boot] [PATCH] sunxi: Change SUNXI_GMAC to SUN7I_GMAC in sources   Jagan Teki
    • [U-Boot] [PATCH] sunxi: Change SUNXI_GMAC to SUN7I_GMAC in sources   Jagan Teki
• [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env   Sam Protsenko
  • [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env   Łukasz Majewski
    • [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env   Heiko Schocher
      • [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env   Sam Protsenko
      • [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env   Łukasz Majewski
  • [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env   Marek Vasut
  • [U-Boot] [U-Boot, v3, 1/1] usb: gadget: g_dnl: Sync internal SN variable with env   Tom Rini
• [U-Boot] [PATCH 00/23] efi_loader implement missing functions   Rob Clark
  • [U-Boot] [PATCH 00/23] efi_loader implement missing functions   Rob Clark
  • [U-Boot] [PATCH 00/23] efi_loader implement missing functions   Tom Rini
    • [U-Boot] [PATCH 00/23] efi_loader implement missing functions   Simon Glass
      • [U-Boot] [PATCH 00/23] efi_loader implement missing functions   Rob Clark
      • [U-Boot] [PATCH 00/23] efi_loader implement missing functions   Heinrich Schuchardt
      • [U-Boot] [PATCH 00/23] efi_loader implement missing functions   Rob Clark
• [U-Boot] [ANN] U-Boot v2017.09-rc3 released   Tom Rini
• [U-Boot] [PATCH] mmc: sunxi: Only update timing mode bit when enabling new timing mode   Jagan Teki
• [U-Boot] DA850evm SPI Flash Partitions between Linux and U-boot are Inconsistent   Sekhar Nori
  • [U-Boot] DA850evm SPI Flash Partitions between Linux and U-boot are Inconsistent   Adam Ford
• [U-Boot] [PATCH 1/5] pci: xilinx: Fix doc comments on config space accessors   Tuomas Tynkkynen
  • [U-Boot] [PATCH 2/5] pci: xilinx: Remove unused field 'hose' from struct xilinx_pcie   Tuomas Tynkkynen
    • [U-Boot] [PATCH 2/5] pci: xilinx: Remove unused field 'hose' from struct xilinx_pcie   Bin Meng
    • [U-Boot] [U-Boot, 2/5] pci: xilinx: Remove unused field 'hose' from struct xilinx_pcie   Tom Rini
  • [U-Boot] [PATCH 3/5] pci: tegra: Remove unused field 'hose' from struct tegra_pcie   Tuomas Tynkkynen
    • [U-Boot] [PATCH 3/5] pci: tegra: Remove unused field 'hose' from struct tegra_pcie   Bin Meng
    • [U-Boot] [U-Boot, 3/5] pci: tegra: Remove unused field 'hose' from struct tegra_pcie   Tom Rini
  • [U-Boot] [PATCH 4/5] pci: layerscape: Remove unused field 'hose' from struct ls_pcie   Tuomas Tynkkynen
    • [U-Boot] [PATCH 4/5] pci: layerscape: Remove unused field 'hose' from struct ls_pcie   Bin Meng
    • [U-Boot] [U-Boot, 4/5] pci: layerscape: Remove unused field 'hose' from struct ls_pcie   Tom Rini
  • [U-Boot] [PATCH 5/5] pci: Remove unnecessary 'default n' from Kconfig   Tuomas Tynkkynen
    • [U-Boot] [PATCH 5/5] pci: Remove unnecessary 'default n' from Kconfig   Bin Meng
    • [U-Boot] [U-Boot, 5/5] pci: Remove unnecessary 'default n' from Kconfig   Tom Rini
  • [U-Boot] [PATCH 1/5] pci: xilinx: Fix doc comments on config space accessors   Bin Meng
  • [U-Boot] [U-Boot, 1/5] pci: xilinx: Fix doc comments on config space accessors   Tom Rini
• [U-Boot] [PATCH v3] rpi: Enable USB keyboard support   Tom Rini
• [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional   Tom Rini
  • [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional   Felix Brack
    • [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional   Tom Rini
      • [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional   Felix Brack
      • [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional   Tom Rini
• [U-Boot] [PATCH v2] sunxi: Fix CONFIG_SUNXI_GMAC references   Jagan Teki
  • [U-Boot] [PATCH v2] sunxi: Fix CONFIG_SUNXI_GMAC references   Jagan Teki
• [U-Boot] [PATCH 0/2] Board for QEMU's '-machine virt' on ARM   Tom Rini
• [U-Boot] [Patch V2 0/4] Migrate DA850-evm to Driver Model   Adam Ford
  • [U-Boot] [Patch V2 1/4] spi: davinci_spi: Add da830-spi support for DM   Adam Ford
    • [U-Boot] [Patch V2 1/4] spi: davinci_spi: Add da830-spi support for DM   Jagan Teki
  • [U-Boot] [Patch V2 2/4] arm: da850-evm: Enable DM and device tree support for da850-evm   Adam Ford
    • [U-Boot] [Patch V2 2/4] arm: da850-evm: Enable DM and device tree support for da850-evm   Jagan Teki
  • [U-Boot] [Patch V2 3/4] arm: da850-evm: Enable MTD Parts   Adam Ford
    • [U-Boot] [Patch V2 3/4] arm: da850-evm: Enable MTD Parts   Jagan Teki
  • [U-Boot] [Patch V2 4/4] ARM: da850-evm: Enable DM_I2C   Adam Ford
    • [U-Boot] [Patch V2 4/4] ARM: da850-evm: Enable DM_I2C   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
  • [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
  • [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
    • [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Tom Rini
  • [U-Boot] [GIT PULL] u-boot-uniphier/master   Masahiro Yamada
    • [U-Boot] [GIT PULL] u-boot-uniphier/master   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
  • [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
    • [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
  • [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
    • [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support   Fabio Estevam
  • [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support   Stefan Agner
    • [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support   Fabio Estevam
      • [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support   Fabio Estevam
      • [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support   Stefan Agner
      • [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support   Vincent Prince
      • [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support   Stefan Agner
      • [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support   Vincent Prince
      • [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support   Stefan Agner
• [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
  • [U-Boot] Please pull u-boot-video/master   Tom Rini
    • [U-Boot] Please pull u-boot-video/master   Tom Rini
      • [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
  • [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
    • [U-Boot] Please pull u-boot-video/master   Tom Rini
  • [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
    • [U-Boot] Please pull u-boot-video/master   Tom Rini
• [U-Boot] [U-Boot, 1/2] configs: Migrate all of the existing USB symbols, except fastboot   Tom Rini
• [U-Boot] [U-Boot, 2/2] Kconfig: Migrate all of cmd/fastboot/Kconfig to defconfigs   Tom Rini
• [U-Boot] [PATCH V2] imx: mx7: Add support for USB and normal boot modes   Troy Kisky
• [U-Boot] [U-Boot, V3] Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig   Tom Rini
  • [U-Boot] [U-Boot, V3] Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig   Adam Ford
• [U-Boot] [PATCH V4] Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] ARM: socfpga: remove unneeded NAND config options   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: socfpga: remove unneeded NAND config options   Marek Vasut
    • [U-Boot] [PATCH] ARM: socfpga: remove unneeded NAND config options   Masahiro Yamada
      • [U-Boot] [PATCH] ARM: socfpga: remove unneeded NAND config options   Marek Vasut
• [U-Boot] [U-Boot, 1/2] Configs: Migrate I2C_BUS_MAX to CONFIG_SYS_I2C_BUS_MAX   Tom Rini
• [U-Boot] [U-Boot, 2/2] Convert CONFIG_SYS_I2C_BUS_MAX to Kconfig   Tom Rini
• [U-Boot] Convert CONFIG_SPL_OMAP3_ID_NAND to Kconfig   Tom Rini
• [U-Boot] Convert CONFIG_BCH to Kconfig   Tom Rini
• [U-Boot] [PATCH] Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig   Adam Ford
• [U-Boot] [PATCH 1/3] nvme: Fix wrong ndev->queues memset   Bin Meng
  • [U-Boot] [PATCH 2/3] nvme: Fix potential sign extension issue in nvme_blk_rw()   Bin Meng
    • [U-Boot] [PATCH 2/3] nvme: Fix potential sign extension issue in nvme_blk_rw()   Tom Rini
    • [U-Boot] [U-Boot, 2/3] nvme: Fix potential sign extension issue in nvme_blk_rw()   Tom Rini
  • [U-Boot] [PATCH 3/3] nvme: Remove dead codes in nvme_setup_io_queues()   Bin Meng
    • [U-Boot] [PATCH 3/3] nvme: Remove dead codes in nvme_setup_io_queues()   Tom Rini
    • [U-Boot] [U-Boot, 3/3] nvme: Remove dead codes in nvme_setup_io_queues()   Tom Rini
  • [U-Boot] [PATCH 1/3] nvme: Fix wrong ndev->queues memset   Tom Rini
  • [U-Boot] [U-Boot,1/3] nvme: Fix wrong ndev->queues memset   Tom Rini
• [U-Boot] [PATCH] part: mac: Suppress the error message after reading ddb   Bin Meng
• [U-Boot] [PATCH 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET   Bin Meng
  • [U-Boot] [PATCH 2/3] block: ide: Drop CONFIG_IDE_LED   Bin Meng
    • [U-Boot] [U-Boot,2/3] block: ide: Drop CONFIG_IDE_LED   Tom Rini
  • [U-Boot] [PATCH 3/3] block: Drop the ftide020 driver   Bin Meng
    • [U-Boot] [U-Boot,3/3] block: Drop the ftide020 driver   Tom Rini
  • [U-Boot] [U-Boot, 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET   Tom Rini
• [U-Boot] [PATCH] x86: theadorable-x86-common: Remove "ip=dhcp" from default environment   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
  • [U-Boot] Please pull u-boot-x86   Tom Rini
  • [U-Boot] Please pull u-boot-x86   Bin Meng
    • [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH 01/13] x86: tsc: Add Airmont reference clock values   Bin Meng
• [U-Boot] [PATCH 02/13] x86: fsp: Update struct common_buf for FSP spec 1.1   Bin Meng
• [U-Boot] [PATCH 03/13] x86: fsp: Add FSP_GRAPHICS_INFO_HOB   Bin Meng
• [U-Boot] [PATCH 04/13] x86: Add Video BIOS Table (VBT) related Kconfig options   Bin Meng
• [U-Boot] [PATCH 05/13] tools: binman: Add a new entry type for Intel VBT   Bin Meng
• [U-Boot] [PATCH 06/13] x86: dts: Include Intel Video BIOS Table in the ROM image   Bin Meng
• [U-Boot] [PATCH 07/13] x86: dm: video: Add a framebuffer driver that utilizes VBT   Bin Meng
• [U-Boot] [PATCH 08/13] x86: fsp: Update fsp command to show spec 1.1 header   Bin Meng
• [U-Boot] [PATCH v2 0/8] fs/fat: cleanups + readdir implementation   Rob Clark
  • [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata   Rob Clark
    • [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata   Łukasz Majewski
      • [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata   Rob Clark
      • [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata   Łukasz Majewski
    • [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata   Simon Glass
  • [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators   Rob Clark
    • [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators   Łukasz Majewski
    • [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators   Simon Glass
      • [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators   Rob Clark
      • [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators   Simon Glass
      • [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators   Rob Clark
  • [U-Boot] [PATCH v2 3/8] fat/fs: convert to directory iterators   Rob Clark
    • [U-Boot] [PATCH v2 3/8] fat/fs: convert to directory iterators   Łukasz Majewski
      • [U-Boot] [PATCH v2 3/8] fat/fs: convert to directory iterators   Simon Glass
      • [U-Boot] [PATCH v2 3/8] fat/fs: convert to directory iterators   Rob Clark
  • [U-Boot] [PATCH v2 4/8] fs: add fs_readdir()   Rob Clark
    • [U-Boot] [PATCH v2 4/8] fs: add fs_readdir()   Łukasz Majewski
      • [U-Boot] [PATCH v2 4/8] fs: add fs_readdir()   Simon Glass
      • [U-Boot] [PATCH v2 4/8] fs: add fs_readdir()   Rob Clark
  • [U-Boot] [PATCH v2 5/8] fs/fat: implement opendir/readdir/closedir   Rob Clark
    • [U-Boot] [PATCH v2 5/8] fs/fat: implement opendir/readdir/closedir   Łukasz Majewski
    • [U-Boot] [PATCH v2 5/8] fs/fat: implement opendir/readdir/closedir   Simon Glass
  • [U-Boot] [PATCH v2 6/8] fat/fs: remove a bunch of dead code   Rob Clark
    • [U-Boot] [PATCH v2 6/8] fat/fs: remove a bunch of dead code   Simon Glass
  • [U-Boot] [PATCH v2 7/8] fat/fs: move ls to generic implementation   Rob Clark
    • [U-Boot] [PATCH v2 7/8] fat/fs: move ls to generic implementation   Łukasz Majewski
    • [U-Boot] [PATCH v2 7/8] fat/fs: move ls to generic implementation   Simon Glass
      • [U-Boot] [PATCH v2 7/8] fat/fs: move ls to generic implementation   Rob Clark
  • [U-Boot] [PATCH v2 8/8] fs/fat: fix case for FAT shortnames   Rob Clark
    • [U-Boot] [PATCH v2 8/8] fs/fat: fix case for FAT shortnames   Łukasz Majewski
      • [U-Boot] [PATCH v2 8/8] fs/fat: fix case for FAT shortnames   Simon Glass
• [U-Boot] [PATCHi v2] omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environment   Derald D. Woods
  • [U-Boot] [PATCH v3] omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environment   Derald D. Woods
    • [U-Boot] [U-Boot, v3] omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environment   Tom Rini
• [U-Boot] [PATCH 1/3] GPT: create block device for sandbox testing   alison at peloton-tech.com
  • [U-Boot] [PATCH 2/3] add pytest for 'gpt guid' command in sandbox   alison at peloton-tech.com
  • [U-Boot] [PATCH 3/3] add pytests for 'gpt rename' and 'gpt swap'   alison at peloton-tech.com
    • [U-Boot] [PATCH 3/3] add pytests for 'gpt rename' and 'gpt swap'   Simon Glass
      • [U-Boot] [PATCH v2 1/3] add pytests for 'gpt rename' and 'gpt swap'   alison at peloton-tech.com
      • [U-Boot] [PATCH 1/1] add pytests for 'gpt rename' and 'gpt swap'   alison at peloton-tech.com
      • [U-Boot] [PATCH 1/1] add pytests for 'gpt rename' and 'gpt swap'   Simon Glass
      • [U-Boot] [U-Boot, 1/1] add pytests for 'gpt rename' and 'gpt swap'   Tom Rini
      • [U-Boot] [U-Boot, 1/1] add pytests for 'gpt rename' and 'gpt swap'   Stephen Warren
      • [U-Boot] [U-Boot, 1/1] add pytests for 'gpt rename' and 'gpt swap'   Tom Rini
      • [U-Boot] [U-Boot, 1/1] add pytests for 'gpt rename' and 'gpt swap'   Stephen Warren
  • [U-Boot] [PATCH 1/3] GPT: create block device for sandbox testing   Simon Glass
    • [U-Boot] [PATCH 0/2] GPT: create block device for guid testing   alison at peloton-tech.com
      • [U-Boot] [PATCH 1/2] GPT: create block device for sandbox testing   alison at peloton-tech.com
      • [U-Boot] [PATCH 1/2] GPT: create block device for sandbox testing   Simon Glass
      • [U-Boot] [U-Boot, 1/2] GPT: create block device for sandbox testing   Tom Rini
      • [U-Boot] [PATCH 2/2] add pytests for 'gpt guid' command in sandbox   alison at peloton-tech.com
      • [U-Boot] [PATCH 2/2] add pytests for 'gpt guid' command in sandbox   Simon Glass
      • [U-Boot] [U-Boot, 2/2] add pytests for 'gpt guid' command in sandbox   Tom Rini
• [U-Boot] omap3_logic: Move CONFIG_SYS_NAND_U_BOOT_OFFS to Kconfig   Tom Rini
• [U-Boot] Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is set   Tom Rini
• [U-Boot] [PATCH 1/2] configs: Migrate all of the existing USB symbols, except fastboot   Chris Packham
• [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:   Alexander Graf
    • [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:   Heinrich Schuchardt
      • [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:   Brüns, Stefan
    • [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:   Heinrich Schuchardt
• [U-Boot] [PATCH v1 1/2] x86: tangier: Enable ACPI support for Intel Tangier   Bin Meng
• [U-Boot] [PATCH v1 2/2] x86: edison: Bring ACPI minimal support to the board   Bin Meng
• [U-Boot] [PATCH 1/2] Makefile: Quiesce libfdt build   Bin Meng
  • [U-Boot] [PATCH 2/2] Makefile: Suppress output of python libfdt build command   Bin Meng
    • [U-Boot] [U-Boot, 2/2] Makefile: Suppress output of python libfdt build command   Tom Rini
  • [U-Boot] [U-Boot,1/2] Makefile: Quiesce libfdt build   Tom Rini
• [U-Boot] [PATCH] efi_loader: Fix efi_exit gd clobbering   Alexander Graf
• [U-Boot] [PATCH] mvebu: turris_omnia: Only set eth?addr env if CONFIG_CMD_NET   Marek Behún
  • [U-Boot] [PATCH] mvebu: turris_omnia: Only set eth?addr env if CONFIG_CMD_NET   Stefan Roese
    • [U-Boot] [PATCH] mvebu: turris_omnia: Only set eth?addr env if CONFIG_CMD_NET   Stefan Roese
• [U-Boot] [PATCH 1/2] Fix boards missing CONFIG_NAND after Kconfig migration   Adam Ford
• [U-Boot] [PATCH 2/2] Convert CONFIG_SYS_NAND_ECCSIZE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] Configs: Rename MTDIDS_DEFAULT and MTDPARTS_DEFAULT   Adam Ford
• [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code   Fabio Estevam
  • [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code   Łukasz Majewski
  • [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code   Stefan Agner
    • [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code   Fabio Estevam
• [U-Boot] [PATCH 0/9] Add single-device read-only BTRFS support   Marek Behún
  • [U-Boot] [PATCH 1/9] lib: Add CRC32-C   Marek Behún
    • [U-Boot] [PATCH 1/9] lib: Add CRC32-C   Łukasz Majewski
      • [U-Boot] [PATCH 1/9] lib: Add CRC32-C   Marek Behun
  • [U-Boot] [PATCH 2/9] fs: Create a common fs_devread for ext4/reiserfs/zfs   Marek Behún
  • [U-Boot] [PATCH 4/9] fs: btrfs: Add btrfs_tree.h and ctree.h from Linux (and modified)   Marek Behún
  • [U-Boot] [PATCH 5/9] fs: btrfs: Add disk-to-cpu and cpu-to-disk conversion functions   Marek Behún
  • [U-Boot] [PATCH 6/9] fs: btrfs: Add single-device read-only BTRFS implementation   Marek Behún
  • [U-Boot] [PATCH 7/9] fs: btrfs: Add U-Boot fs handlers.   Marek Behún
  • [U-Boot] [PATCH 8/9] cmd: Add the 'btrsubvol' command to list BTRFS subvolumes   Marek Behún
  • [U-Boot] [PATCH 9/9] mvebu: turris_omnia: Add CONFIG_CMD_BTRFS to defconfig   Marek Behún
• [U-Boot] [PATCH 3/9] include: Add a variadic macro to call a callback for all arguments   Marek Behún
• [U-Boot] [PATCH] git: mailrc: Update e-mail address   Lukasz Majewski
  • [U-Boot] git: mailrc: Update e-mail address   Tom Rini
• [U-Boot] [PATCH] crypto/fsl: fix obj-yy in Makefile   Clemens Gruber
  • [U-Boot] [PATCH] crypto/fsl: fix obj-yy in Makefile   Fabio Estevam
  • [U-Boot] crypto/fsl: fix obj-yy in Makefile   Tom Rini
• [U-Boot] [U-Boot,1/4] part: efi: Fix offset   Tom Rini
• [U-Boot] [U-Boot, 2/4] part: efi: rework the partition start and size in gpt_fill_pte   Tom Rini
• [U-Boot] [U-Boot, 3/4] part: efi: make gpt_fill_pte take the device descriptor   Tom Rini
• [U-Boot] [U-Boot,4/4] part: efi: Disable overlap check   Tom Rini
• [U-Boot] [U-Boot, 1/8] include/config_fallbacks.h: add default for CONFIG_SYS_CBSIZE   Tom Rini
• [U-Boot] [U-Boot, 2/8] include/configs: remove CONFIG_SYS_CBSIZE when the default value is used   Tom Rini
• [U-Boot] [U-Boot, 3/8] include/config_fallbacks.h: change fallback for CONFIG_SYS_PBSIZE   Tom Rini
• [U-Boot] [U-Boot, 4/8] include/configs: drop default definitions of CONFIG_SYS_PBSIZE   Tom Rini
• [U-Boot] [U-Boot, 5/8] include/config_fallbacks.h: add default for CONFIG_SYS_MAXARGS   Tom Rini
• [U-Boot] [U-Boot, 6/8] include/configs: drop default definitions of CONFIG_SYS_MAXARGS   Tom Rini
• [U-Boot] [U-Boot, 7/8] include/configs: remove default values of CONFIG_SYS_BARGSIZE   Tom Rini
• [U-Boot] [U-Boot, 8/8] include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions   Tom Rini
• [U-Boot] bch: don't use __BSD_VISIBLE to test for fls   Tom Rini
• [U-Boot] fix: fw_env: Prevent writing error message on special files, which don't support fsync   Tom Rini
• [U-Boot] [U-Boot,1/1] disk: part: fix typo   Tom Rini
• [U-Boot] [PATCH v2] part: mac: Suppress the error message after reading ddb   Bin Meng
  • [U-Boot] [U-Boot, v2] part: mac: Suppress the error message after reading ddb   Tom Rini
• [U-Boot] [PATCH 0/3] armv8: ls1088a: add pcie support   Zhiqiang Hou
  • [U-Boot] [PATCH 1/3] armv8: ls1088a: fix the MMU table for pcie config space   Zhiqiang Hou
    • [U-Boot] [PATCH 1/3] armv8: ls1088a: fix the MMU table for pcie config space   York Sun
  • [U-Boot] [PATCH 2/3] armv8: ls1088a: add PCIe dts node   Zhiqiang Hou
    • [U-Boot] [PATCH 2/3] armv8: ls1088a: add PCIe dts node   York Sun
  • [U-Boot] [PATCH 3/3] armv8: ls1088a: Enable PCIe in defconfigs   Zhiqiang Hou
    • [U-Boot] [PATCH 3/3] armv8: ls1088a: Enable PCIe in defconfigs   York Sun
      • [U-Boot] [PATCH 3/3] armv8: ls1088a: Enable PCIe in defconfigs   Z.q. Hou
    • [U-Boot] [PATCH 3/3] armv8: ls1088a: Enable PCIe in defconfigs   York Sun
• [U-Boot] [PATCH 1/2] tools: .gitignore: Sort in alphabetical order   Bin Meng
  • [U-Boot] [PATCH 2/2] tools: .gitignore: Add libfdt related files   Bin Meng
• [U-Boot] ** Can't read Driver Desriptor Block **   Bin Meng
  • [U-Boot] ** Can't read Driver Desriptor Block **   Heinrich Schuchardt
    • [U-Boot] ** Can't read Driver Desriptor Block **   Bin Meng
      • [U-Boot] ** Can't read Driver Desriptor Block **   Bin Meng
• [U-Boot] [PATCH 1/4] blk: Use macros for block device vendor/product/rev string size   Bin Meng
  • [U-Boot] [PATCH 2/4] block: ide: Fix block read/write with driver model   Bin Meng
  • [U-Boot] [PATCH 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted   Bin Meng
  • [U-Boot] [PATCH 4/4] cmd: ide: Make the first device the default one   Bin Meng
  • [U-Boot] [PATCH 1/4] blk: Use macros for block device vendor/product/rev string size   Tom Rini
• [U-Boot] [PATCH 01/19] configs: Add FPGA loadfs config for Arria 10   Chee, Tien Fong
• [U-Boot] [next PATCH v2 1/2] ARM: mvebu: Add SoC IDs for Marvell's integrated CPUs   Chris Packham
  • [U-Boot] [next PATCH v2 2/2] ARM: mvebu: add additional information to board_add_ram_info()   Chris Packham
    • [U-Boot] [next PATCH v2 2/2] ARM: mvebu: add additional information to board_add_ram_info()   Stefan Roese
    • [U-Boot] [next PATCH v2 2/2] ARM: mvebu: add additional information to board_add_ram_info()   Stefan Roese
  • [U-Boot] [next PATCH v2 1/2] ARM: mvebu: Add SoC IDs for Marvell's integrated CPUs   Stefan Roese
  • [U-Boot] [next PATCH v2 1/2] ARM: mvebu: Add SoC IDs for Marvell's integrated CPUs   Stefan Roese
• [U-Boot] [PATCH 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC   Stefan Mavrodiev
  • [U-Boot] [PATCH 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC   Stefan Mavrodiev
  • [U-Boot] [PATCH 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC   Jagan Teki
    • [U-Boot] [PATCH 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC   Stefan Mavrodiev
• [U-Boot] [RESEND PATCH v3 0/7] Add VID support for QDS and RDB platforms   Rajesh Bhagat
  • [U-Boot] [RESEND PATCH v3 3/7] board: common: vid: Add board specific vdd adjust API   Rajesh Bhagat
  • [U-Boot] [RESEND PATCH v3 4/7] board: common: vid: Move IR chip specific code in flag   Rajesh Bhagat
  • [U-Boot] [RESEND PATCH v3 5/7] Kconfig: Add LTC3882 voltage regulator config   Rajesh Bhagat
  • [U-Boot] [RESEND PATCH v3 6/7] board: common: vid: Add support for LTC3882 voltage regulator chip   Rajesh Bhagat
  • [U-Boot] [RESEND PATCH v3 7/7] ls1088a: Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v3 1/7] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
  • [U-Boot] [RESEND PATCH v3 1/7] armv8: lsch3: Add serdes and DDR voltage setup   York Sun
    • [U-Boot] [RESEND PATCH v3 1/7] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v3 2/7] board: common:vid: Add LS1088A VID Supported voltage values   Rajesh Bhagat
• [U-Boot] [PATCH 01/23] efi_loader: allow return value in EFI_CALL   Simon Glass
• [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA   Chee, Tien Fong
  • [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA   Marek Vasut
    • [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA   Chee, Tien Fong
      • [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA   Marek Vasut
      • [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA   Chee, Tien Fong
      • [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA   Marek Vasut
      • [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA   Chee, Tien Fong
      • [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA   Marek Vasut
      • [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA   Chee, Tien Fong
• [U-Boot] [PATCH 05/19] arm: socfpga: Enhance FPGA program support with at least 4 byte data   Chee, Tien Fong
• [U-Boot] [PATCH 07/19] arm: socfpga: Add DRAM bank size initialization function   Chee, Tien Fong
  • [U-Boot] [PATCH 07/19] arm: socfpga: Add DRAM bank size initialization function   Marek Vasut
    • [U-Boot] [PATCH 07/19] arm: socfpga: Add DRAM bank size initialization function   Chee, Tien Fong
• [U-Boot] [PATCH 1/1] efi_loader: helloworld.c: remove superfluous include   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_loader: helloworld.c: remove superfluous include   Alexander Graf
• [U-Boot] [PATCH v2 1/4] blk: Use macros for block device vendor/product/rev string size   Bin Meng
  • [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model   Bin Meng
    • [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model   Heinrich Schuchardt
    • [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model   Bin Meng
    • [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model   Simon Glass
  • [U-Boot] [PATCH v2 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted   Bin Meng
    • [U-Boot] [PATCH v2 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted   Simon Glass
      • [U-Boot] [PATCH v2 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted   Bin Meng
  • [U-Boot] [PATCH v2 4/4] cmd: ide: Make the first device the default one   Bin Meng
    • [U-Boot] [PATCH v2 4/4] cmd: ide: Make the first device the default one   Simon Glass
  • [U-Boot] [PATCH v2 1/4] blk: Use macros for block device vendor/product/rev string size   Simon Glass
• [U-Boot] [PATCH] armv8: Remove dependency of SERDES for LS CHASIS3   Sriram Dash
  • [U-Boot] [PATCH] armv8: Remove dependency of SERDES for LS CHASIS3   York Sun
    • [U-Boot] [PATCH] armv8: Remove dependency of SERDES for LS CHASIS3   Sriram Dash
• [U-Boot] [PATCH] armv8: fsl: ifc: Put IFC related code under CONFIG_FSL_IFC   Sriram Dash
  • [U-Boot] [PATCH] armv8: fsl: ifc: Put IFC related code under CONFIG_FSL_IFC   York Sun
• [U-Boot] [PATCH] armv8: fsl: i2c: Put I2C related code under CONFIG_SYS_I2C   Sriram Dash
  • [U-Boot] [PATCH] armv8: fsl: i2c: Put I2C related code under CONFIG_SYS_I2C   York Sun
• [U-Boot] [PATCH v5 1/9] armv8: Add scfg_clrsetbits_32(), scfg_clrbits_32()   Ran Wang
  • [U-Boot] [PATCH v5 2/9] armv8: Add workaround for USB erratum A-009008   Ran Wang
    • [U-Boot] [PATCH v5 2/9] armv8: Add workaround for USB erratum A-009008   York Sun
  • [U-Boot] [PATCH v5 3/9] armv8: Add workaround for USB erratum A-009798   Ran Wang
    • [U-Boot] [PATCH v5 3/9] armv8: Add workaround for USB erratum A-009798   York Sun
  • [U-Boot] [PATCH v5 4/9] armv8: Add workaround for USB erratum A-008997   Ran Wang
    • [U-Boot] [PATCH v5 4/9] armv8: Add workaround for USB erratum A-008997   Michael Lawnick
    • [U-Boot] [PATCH v5 4/9] armv8: Add workaround for USB erratum A-008997   York Sun
  • [U-Boot] [PATCH v5 5/9] armv8: Add workaround for USB erratum A-009007   Ran Wang
    • [U-Boot] [PATCH v5 5/9] armv8: Add workaround for USB erratum A-009007   York Sun
  • [U-Boot] [PATCH v5 6/9] armv7: Add workaround for USB erratum A-009008   Ran Wang
    • [U-Boot] [PATCH v5 6/9] armv7: Add workaround for USB erratum A-009008   York Sun
  • [U-Boot] [PATCH v5 7/9] armv7: Add workaround for USB erratum A-009798   Ran Wang
    • [U-Boot] [PATCH v5 7/9] armv7: Add workaround for USB erratum A-009798   York Sun
  • [U-Boot] [PATCH v5 8/9] armv7: Add workaround for USB erratum A-008997   Ran Wang
    • [U-Boot] [PATCH v5 8/9] armv7: Add workaround for USB erratum A-008997   York Sun
  • [U-Boot] [PATCH v5 9/9] armv7: Add workaround for USB erratum A-009007   Ran Wang
    • [U-Boot] [PATCH v5 9/9] armv7: Add workaround for USB erratum A-009007   York Sun
  • [U-Boot] [PATCH v5 1/9] armv8: Add scfg_clrsetbits_32(), scfg_clrbits_32()   York Sun
• [U-Boot] [PATCH 1/2] rockchip: rk3368: add ENV_MEM_LAYOUT to extra env settings   Andy Yan
  • [U-Boot] [PATCH 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board   Andy Yan
    • [U-Boot] [PATCH 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board   Simon Glass
    • [U-Boot] [U-Boot, 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board   Philipp Tomsich
    • [U-Boot] [U-Boot, 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board   Philipp Tomsich
    • [U-Boot] [U-Boot, 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/2] rockchip: rk3368: add ENV_MEM_LAYOUT to extra env settings   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/2] rockchip: rk3368: add ENV_MEM_LAYOUT to extra env settings   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/2] rockchip: rk3368: add ENV_MEM_LAYOUT to extra env settings   Philipp Tomsich
• [U-Boot] [PATCH v2 1/2] dm: core: add clocks node scan   Patrice CHOTARD
• [U-Boot] [PATCH v3 0/2] dm: core: add clocks node scan   patrice.chotard at st.com
  • [U-Boot] [PATCH v3 1/2] dm: core: add clocks node scan   patrice.chotard at st.com
    • [U-Boot] [PATCH v3 1/2] dm: core: add clocks node scan   Simon Glass
      • [U-Boot] [PATCH v3 1/2] dm: core: add clocks node scan   sjg at google.com
  • [U-Boot] [PATCH v3 2/2] dm: test: replace dm_scan_dt() by of dm_extended_scan_fdt() in dm_do_test   patrice.chotard at st.com
    • [U-Boot] [PATCH v3 2/2] dm: test: replace dm_scan_dt() by of dm_extended_scan_fdt() in dm_do_test   Simon Glass
      • [U-Boot] [PATCH v3 2/2] dm: test: replace dm_scan_dt() by of dm_extended_scan_fdt() in dm_do_test   sjg at google.com
• [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Tom Rini
  • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Paul Barker
    • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Simon Glass
      • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Tom Rini
    • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Tuomas Tynkkynen
      • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Paul Barker
  • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Peter Robinson
    • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Tom Rini
      • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Peter Robinson
      • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Tom Rini
      • [U-Boot] [ANN] U-Boot v2017.09-rc4 released   Peter Robinson
• [U-Boot] [PATCH v5 1/1] mmc: Add MMC support for stm32h7 Socs   patrice.chotard at st.com
  • [U-Boot] [PATCH v5 1/1] mmc: Add MMC support for stm32h7 Socs   Simon Glass
    • [U-Boot] [PATCH v5 1/1] mmc: Add MMC support for stm32h7 Socs   Jaehoon Chung
• [U-Boot] [PATCH v9 00/10] STiH410-B2260: add reset, usb and fastboot support   Patrice CHOTARD
  • [U-Boot] [PATCH v9 00/10] STiH410-B2260: add reset, usb and fastboot support   Patrice CHOTARD
• [U-Boot] [PATCH] gitignore: add intermediates from libfdt build   sjg at google.com
  • [U-Boot] [PATCH] gitignore: add intermediates from libfdt build   Bin Meng
    • [U-Boot] [PATCH] gitignore: add intermediates from libfdt build   Simon Glass
      • [U-Boot] [PATCH] gitignore: add intermediates from libfdt build   Tom Rini
      • [U-Boot] [PATCH] gitignore: add intermediates from libfdt build   Bin Meng
• [U-Boot] [PATCH v2] dm: core: Add livetree documentation   sjg at google.com
• [U-Boot] [PATCH] fdt: fix 'prop (...) not found!' error in 'fdt set' command   sjg at google.com
• [U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK   sjg at google.com
• [U-Boot] Please pull u-boot-dm   Simon Glass
  • [U-Boot] Please pull u-boot-dm   Tom Rini
  • [U-Boot] Please pull u-boot-dm   Simon Glass
    • [U-Boot] Please pull u-boot-dm   Tom Rini
  • [U-Boot] Please pull u-boot-dm   Simon Glass
    • [U-Boot] Please pull u-boot-dm   Tom Rini
  • [U-Boot] Please pull u-boot-dm   Simon Glass
    • [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] Bad URL for mailing list info in "Contacts" web page   Stefan Weil
  • [U-Boot] Bad URL for mailing list info in "Contacts" web page   Anatolij Gustschin
• [U-Boot] [Bug] Installation of sources fails on case insensitive filesystems   Stefan Weil
  • [U-Boot] [Bug] Installation of sources fails on case insensitive filesystems   Stefan Weil
• [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest   Pantelis Antoniou
  • [U-Boot] [PATCH v3 01/14] Introduce fdt_setprop_placeholder() method   Pantelis Antoniou
    • [U-Boot] [PATCH v3 01/14] Introduce fdt_setprop_placeholder() method   Simon Glass
      • [U-Boot] [PATCH v3 01/14] Introduce fdt_setprop_placeholder() method   sjg at google.com
  • [U-Boot] [PATCH v3 02/14] fdt: Introduce helper method fdt_overlay_apply_verbose()   Pantelis Antoniou
    • [U-Boot] [PATCH v3 02/14] fdt: Introduce helper method fdt_overlay_apply_verbose()   Simon Glass
      • [U-Boot] [PATCH v3 02/14] fdt: Introduce helper method fdt_overlay_apply_verbose()   sjg at google.com
  • [U-Boot] [PATCH v3 03/14] fdt: Switch to using the verbose overlay application method   Pantelis Antoniou
    • [U-Boot] [PATCH v3 03/14] fdt: Switch to using the verbose overlay application method   Simon Glass
      • [U-Boot] [PATCH v3 03/14] fdt: Switch to using the verbose overlay application method   Simon Glass
  • [U-Boot] [PATCH v3 04/14] fdt: Allow stacked overlays phandle references   Pantelis Antoniou
    • [U-Boot] [PATCH v3 04/14] fdt: Allow stacked overlays phandle references   Simon Glass
      • [U-Boot] [PATCH v3 04/14] fdt: Allow stacked overlays phandle references   sjg at google.com
  • [U-Boot] [PATCH v3 05/14] fit: Allow multiple images per property   Pantelis Antoniou
    • [U-Boot] [PATCH v3 05/14] fit: Allow multiple images per property   Simon Glass
      • [U-Boot] [PATCH v3 05/14] fit: Allow multiple images per property   sjg at google.com
  • [U-Boot] [PATCH v3 06/14] fit: Do not throw away extra configuration on fit_image_load()   Pantelis Antoniou
    • [U-Boot] [PATCH v3 06/14] fit: Do not throw away extra configuration on fit_image_load()   Simon Glass
      • [U-Boot] [PATCH v3 06/14] fit: Do not throw away extra configuration on fit_image_load()   sjg at google.com
  • [U-Boot] [PATCH v3 07/14] fit: Introduce methods for applying overlays on fit-load   Pantelis Antoniou
    • [U-Boot] [PATCH v3 07/14] fit: Introduce methods for applying overlays on fit-load   Simon Glass
      • [U-Boot] [PATCH v3 07/14] fit: Introduce methods for applying overlays on fit-load   sjg at google.com
  • [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc   Pantelis Antoniou
    • [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc   Łukasz Majewski
      • [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc   Pantelis Antoniou
    • [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc   Simon Glass
      • [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc   sjg at google.com
  • [U-Boot] [PATCH v3 09/14] doc: Document how to apply fdt overlays   Pantelis Antoniou
    • [U-Boot] [PATCH v3 09/14] doc: Document how to apply fdt overlays   Łukasz Majewski
    • [U-Boot] [PATCH v3 09/14] doc: Document how to apply fdt overlays   Simon Glass
      • [U-Boot] [PATCH v3 09/14] doc: Document how to apply fdt overlays   sjg at google.com
  • [U-Boot] [PATCH v3 10/14] doc: overlays: Tweak documentation regarding overlays   Pantelis Antoniou
    • [U-Boot] [PATCH v3 10/14] doc: overlays: Tweak documentation regarding overlays   Łukasz Majewski
    • [U-Boot] [PATCH v3 10/14] doc: overlays: Tweak documentation regarding overlays   Simon Glass
      • [U-Boot] [PATCH v3 10/14] doc: overlays: Tweak documentation regarding overlays   sjg at google.com
  • [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special   Pantelis Antoniou
    • [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special   Simon Glass
    • [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special   Stephen Warren
      • [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special   Stephen Warren
      • [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special   Tom Rini
      • [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special   Stephen Warren
      • [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special   Tom Rini
      • [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special   sjg at google.com
  • [U-Boot] [PATCH v3 12/14] config: sandbox: Add unit tests   Pantelis Antoniou
    • [U-Boot] [PATCH v3 12/14] config: sandbox: Add unit tests   Simon Glass
      • [U-Boot] [PATCH v3 12/14] config: sandbox: Add unit tests   sjg at google.com
  • [U-Boot] [PATCH v3 13/14] ut: fix fdt_getprop_u32() change   Pantelis Antoniou
    • [U-Boot] [PATCH v3 13/14] ut: fix fdt_getprop_u32() change   Simon Glass
      • [U-Boot] [PATCH v3 13/14] ut: fix fdt_getprop_u32() change   sjg at google.com
  • [U-Boot] [PATCH v3 14/14] test: overlay: Add unit test for stacked overlay   Pantelis Antoniou
    • [U-Boot] [PATCH v3 14/14] test: overlay: Add unit test for stacked overlay   Simon Glass
      • [U-Boot] [PATCH v3 14/14] test: overlay: Add unit test for stacked overlay   sjg at google.com
  • [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest   Simon Glass
    • [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest   Tom Rini
      • [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest   Tom Rini
      • [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest   Tom Rini
    • [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest   Tom Rini
• [U-Boot] [PATCH v2] video: ipuv3_fb: skip IPU shutdown if IPU was not enabled before   Anatolij Gustschin
  • [U-Boot] [PATCH v2] video: ipuv3_fb: skip IPU shutdown if IPU was not enabled before   Anatolij Gustschin
• [U-Boot] Please pull u-boot-sh/rmobile branch   Nobuhiro Iwamatsu
  • [U-Boot] Please pull u-boot-sh/rmobile branch   Tom Rini
• [U-Boot] [PATCH] doc: remove duplicate text in README.gpt   alison at peloton-tech.com
  • [U-Boot] doc: remove duplicate text in README.gpt   Tom Rini
• [U-Boot] [PATCH 0/3] Clean up make process for EFI payload   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/3] efi_loader: rename __efi_hello_world_*   Heinrich Schuchardt
    • [U-Boot] [PATCH 1/3] efi_loader: rename __efi_hello_world_*   Simon Glass
  • [U-Boot] [PATCH 2/3] scripts/Makefile.lib: generalize building built in EFI app   Heinrich Schuchardt
    • [U-Boot] [PATCH 2/3] scripts/Makefile.lib: generalize building built in EFI app   Simon Glass
  • [U-Boot] [PATCH 3/3] efi_loader: usage of always in Makefile   Heinrich Schuchardt
    • [U-Boot] [PATCH 3/3] efi_loader: usage of always in Makefile   Simon Glass
  • [U-Boot] [PATCH 0/3] Clean up make process for EFI payload   Andy Shevchenko
    • [U-Boot] [PATCH 0/3] Clean up make process for EFI payload   Heinrich Schuchardt
• [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Stefan Agner
  • [U-Boot] [PATCH v1 2/2] imx_common: detect USB serial downloader reliably   Stefan Agner
    • [U-Boot] [PATCH v1 2/2] imx_common: detect USB serial downloader reliably   Fabio Estevam
  • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Eric Nelson
    • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Stefan Agner
      • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Stefano Babic
      • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Eric Nelson
      • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Fabio Estevam
  • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Fabio Estevam
    • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Stefan Agner
  • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Stefano Babic
    • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Fabio Estevam
      • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Stefan Agner
      • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Fabio Estevam
      • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Stefan Agner
      • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Fabio Estevam
    • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Eric Nelson
      • [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized   Stefano Babic
• [U-Boot] [PATCH] include/configs: remove references to SMNAND_ENV_OFFSET   Adam Ford
  • [U-Boot] include/configs: remove references to SMNAND_ENV_OFFSET   Tom Rini
• [U-Boot] [U-Boot, 3/3] rockchip: firefly-rk3399: enable ATF and dwmmc   Kever Yang
  • [U-Boot] [U-Boot, 3/3] rockchip: firefly-rk3399: enable ATF and dwmmc   Dr. Philipp Tomsich
  • [U-Boot] [U-Boot, 3/3] rockchip: firefly-rk3399: enable ATF and dwmmc   Philipp Tomsich
• [U-Boot] rockchip: enable rk322x sysreset driver   Kever Yang
  • [U-Boot] rockchip: enable rk322x sysreset driver   Dr. Philipp Tomsich
  • [U-Boot] rockchip: enable rk322x sysreset driver   Philipp Tomsich
• [U-Boot] CONFIG_ENV_ADDR vs CONFIG_ENV_OFFSET   Adam Ford
• [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock   Eric Nelson
  • [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock   Eric Nelson
    • [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock   Fabio Estevam
      • [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock   Stefano Babic
      • [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock   Eric Nelson
      • [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock   Fabio Estevam
    • [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock   Peng Fan
    • [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock   Ye Li
      • [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock   Eric Nelson
• [U-Boot] video: ipu_common: fix build error   Eric Nelson
  • [U-Boot] video: ipu_common: fix build error   Eric Nelson
    • [U-Boot] video: ipu_common: fix build error   Peng Fan
      • [U-Boot] video: ipu_common: fix build error   Eric Nelson
      • [U-Boot] video: ipu_common: fix build error   Lothar Waßmann
      • [U-Boot] video: ipu_common: fix build error   Eric Nelson
  • [U-Boot] video: ipu_common: fix build error   Fabio Estevam
    • [U-Boot] video: ipu_common: fix build error   Eric Nelson
• [U-Boot] [PATCH] libfdt: Initialize the stack variable   Chee, Tien Fong
  • [U-Boot] [PATCH] libfdt: Initialize the stack variable   J. William Campbell
    • [U-Boot] [PATCH] libfdt: Initialize the stack variable   sjg at google.com
• [U-Boot] [PATCH 3/3] rockchip: evb-rv1108: add usb init function for dwc2 gadget   wlf
  • [U-Boot] [PATCH 3/3] rockchip: evb-rv1108: add usb init function for dwc2 gadget   Simon Glass
    • [U-Boot] [PATCH 3/3] rockchip: evb-rv1108: add usb init function for dwc2 gadget   wlf
• [U-Boot] [PATCH] arm64: ls1012ardb: Add distro boot support   Rajesh Bhagat
• [U-Boot] [PATCH] ARM: mvebu: add SAR frequency values for 1.8/2.0GHz   Chris Packham
  • [U-Boot] [PATCH] ARM: mvebu: add SAR frequency values for 1.8/2.0GHz   Chris Packham
    • [U-Boot] [PATCH] ARM: mvebu: add SAR frequency values for 1.8/2.0GHz   Stefan Roese
  • [U-Boot] [PATCH] ARM: mvebu: add SAR frequency values for 1.8/2.0GHz   Stefan Roese
• [U-Boot] [PATCH v2 1/2] env: Fix operation of 'make environ'   Simon Glass
  • [U-Boot] [U-Boot,v2,1/2] env: Fix operation of 'make environ'   Tom Rini
• [U-Boot] [PATCH v2 2/2] env: Add 'envtools' target to 'make help'   Simon Glass
  • [U-Boot] [U-Boot, v2, 2/2] env: Add 'envtools' target to 'make help'   Tom Rini
• [U-Boot] [PATCH] env: Fix operation of 'make environ'   Simon Glass
• [U-Boot] [PATCH v10 00/10] STiH410-B2260: add reset, usb and fastboot support   patrice.chotard at st.com
  • [U-Boot] [PATCH v10 02/10] ARM: dts: stih410-family: Add missing reset_names for mmc1 node   patrice.chotard at st.com
    • [U-Boot] [U-Boot, v10, 02/10] ARM: dts: stih410-family: Add missing reset_names for mmc1 node   Tom Rini
  • [U-Boot] [PATCH v10 03/10] mmc: sti_sdhci: Use reset framework   patrice.chotard at st.com
    • [U-Boot] [U-Boot, v10, 03/10] mmc: sti_sdhci: Use reset framework   Tom Rini
  • [U-Boot] [PATCH v10 04/10] usb: phy: Add STi USB2 PHY   patrice.chotard at st.com
    • [U-Boot] [U-Boot,v10,04/10] usb: phy: Add STi USB2 PHY   Tom Rini
      • [U-Boot] [U-Boot,v10,04/10] usb: phy: Add STi USB2 PHY   Marek Vasut
  • [U-Boot] [PATCH v10 06/10] STiH410-B2260: enable USB, fastboot, reset, PHY related flags   patrice.chotard at st.com
    • [U-Boot] [U-Boot, v10, 06/10] STiH410-B2260: enable USB, fastboot, reset, PHY related flags   Tom Rini
  • [U-Boot] [PATCH v10 07/10] usb: dwc3: Add dwc3 glue driver support for STi   patrice.chotard at st.com
    • [U-Boot] [U-Boot, v10, 07/10] usb: dwc3: Add dwc3 glue driver support for STi   Tom Rini
  • [U-Boot] [PATCH v10 08/10] ARM: dts: STiH410: set DWC3 dual role mode to peripheral   patrice.chotard at st.com
    • [U-Boot] [U-Boot, v10, 08/10] ARM: dts: STiH410: set DWC3 dual role mode to peripheral   Tom Rini
  • [U-Boot] [PATCH v10 09/10] ARM: dts: STiH410: update ehci and ohci compatible   patrice.chotard at st.com
    • [U-Boot] [U-Boot, v10, 09/10] ARM: dts: STiH410: update ehci and ohci compatible   Tom Rini
  • [U-Boot] [PATCH v10 10/10] board: STiH410-B2260: add fastboot support   patrice.chotard at st.com
    • [U-Boot] [U-Boot, v10, 10/10] board: STiH410-B2260: add fastboot support   Tom Rini
• [U-Boot] [PATCH v10 01/10] mmc: sti_sdhci: Rework sti_mmc_core_config()   patrice.chotard at st.com
  • [U-Boot] [U-Boot, v10, 01/10] mmc: sti_sdhci: Rework sti_mmc_core_config()   Tom Rini
• [U-Boot] [PATCH v10 05/10] STiH410-B2260: enable USB Host Networking   patrice.chotard at st.com
  • [U-Boot] [PATCH v10 05/10] STiH410-B2260: enable USB Host Networking   Simon Glass
  • [U-Boot] [U-Boot, v10, 05/10] STiH410-B2260: enable USB Host Networking   Tom Rini
• [U-Boot] rockchip: i2c: fix >32 byte reads   Philipp Tomsich
  • [U-Boot] rockchip: i2c: fix >32 byte reads   Philipp Tomsich
• [U-Boot] [PATCH] MAINTAINERS: add lcd files to video section   Anatolij Gustschin
• [U-Boot] rockchip: rk3288: update the mmc number for fastboot   Philipp Tomsich
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
  • [U-Boot] [PULL] Please pull u-boot-rockchip/master   Tom Rini
  • [U-Boot] [PULL] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
    • [U-Boot] [PULL] Please pull u-boot-rockchip/master   Tom Rini
  • [U-Boot] [PULL] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
    • [U-Boot] [PULL] Please pull u-boot-rockchip/master   Tom Rini
• [U-Boot] rockchip: timer: fix U_BOOT_DRIVER name   Philipp Tomsich
• [U-Boot] [U-Boot,v2,2/5] rockchip: rk322x: add sdram driver   Philipp Tomsich
  • [U-Boot] [U-Boot,v2,2/5] rockchip: rk322x: add sdram driver   Simon Glass
• [U-Boot] [U-Boot, 1/3] configs: rockchip: add USB configs for evb-rv1108 board   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/3] configs: rockchip: add USB configs for evb-rv1108 board   Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] ARM: dts: rockchip: add USB nodes for evb-rv1108   Philipp Tomsich
  • [U-Boot] [U-Boot, 2/3] ARM: dts: rockchip: add USB nodes for evb-rv1108   Philipp Tomsich
• [U-Boot] rockchip: rk322x: enable fastboot to set boot mode tag   Philipp Tomsich
  • [U-Boot] rockchip: rk322x: enable fastboot to set boot mode tag   Philipp Tomsich
• [U-Boot] [PATCH 0/2] clk: at91: utmi: Fix to set the main clock   Wenyou Yang
  • [U-Boot] [PATCH 1/2] clk: at91: utmi: Set the reference clock frequency   Wenyou Yang
    • [U-Boot] [U-Boot, 1/2] clk: at91: utmi: Set the reference clock frequency   Tom Rini
    • [U-Boot] [U-Boot, 1/2] clk: at91: utmi: Set the reference clock frequency   Tom Rini
  • [U-Boot] [PATCH 2/2] ARM: dts: at91: sama5: Add the sfr node   Wenyou Yang
    • [U-Boot] [U-Boot,2/2] ARM: dts: at91: sama5: Add the sfr node   Tom Rini
• [U-Boot] FSL PCIe LTSSM >= PCI_LTSSM_L0 equals link up   Joakim Tjernlund
  • [U-Boot] FSL PCIe LTSSM >= PCI_LTSSM_L0 equals link up   York Sun
    • [U-Boot] FSL PCIe LTSSM >= PCI_LTSSM_L0 equals link up   Mingkai Hu
• [U-Boot] Fix for SHA256 Password Bug   Charles Eidsness
• [U-Boot] rockchip: rk322x: Disable integrated macphy for saving power consuming   Philipp Tomsich
• [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro boot support   Rajesh Bhagat
  • [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro boot support   Rajesh Bhagat
• [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?   Joakim Tjernlund
  • [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?   Mingkai Hu
    • [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?   Joakim Tjernlund
  • [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?   Mingkai Hu
    • [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?   Joakim Tjernlund
      • [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?   Mingkai Hu
• [U-Boot] [PATCH] ARM: rmobile: Fix SD divider settings on Gen3   Marek Vasut
  • [U-Boot] ARM: rmobile: Fix SD divider settings on Gen3   Tom Rini
• [U-Boot] [PATCH v2 0/4] Clean up make process for EFI payload   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 2/4] scripts/Makefile.lib: generalize building built in EFI app   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 3/4] efi_loader: usage of always in Makefile   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 4/4] efi_loader: allow multiple source files for EFI apps   Heinrich Schuchardt
    • [U-Boot] [U-Boot, v2, 4/4] efi_loader: allow multiple source files for EFI apps   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/4] efi_loader: rename __efi_hello_world_*   Heinrich Schuchardt
• [U-Boot] [PATCH] env: Fix out of tree building of tools-all   Tom Rini
  • [U-Boot] [PATCH] env: Fix out of tree building of tools-all   Peter Robinson
  • [U-Boot] [PATCH] env: Fix out of tree building of tools-all   Tom Rini
• [U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line   Moritz Fischer
  • [U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line   Simon Glass
    • [U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line   Moritz Fischer
      • [U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line   Simon Glass
• [U-Boot] [PATCH 1/2] net: Add SMC911X driver to Kconfig   Adam Ford
  • [U-Boot] [PATCH 2/2] arm: omap3_logic: Migrate SMC911X to Kconfig   Adam Ford
• [U-Boot] USB Ethernet with device model   Maxime Ripard
  • [U-Boot] USB Ethernet with device model   Simon Glass
    • [U-Boot] USB Ethernet with device model   Maxime Ripard
      • [U-Boot] USB Ethernet with device model   Simon Glass
  • [U-Boot] USB Ethernet with device model   Vignesh R
• [U-Boot] rk3188/rock_defconfig sdmmc failures   Artturi Alm
  • [U-Boot] rk3188/rock_defconfig sdmmc failures   Heiko Stübner
• [U-Boot] [PATCH 1/2] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code   Fabio Estevam
  • [U-Boot] [PATCH 2/2] mx6sabresd: Add Serial Download Protocol support   Fabio Estevam
    • [U-Boot] [PATCH 2/2] mx6sabresd: Add Serial Download Protocol support   Stefano Babic
  • [U-Boot] [PATCH 1/2] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code   Stefano Babic
• [U-Boot] [PATCH V2 1/2] ARM: OMAP3: am3517_evm: Move header to ti_omap3_common.h   Adam Ford
  • [U-Boot] [PATCH V2 2/2] omap3: am3517_evm: Enable TI_COMMON_CMD_OPTION   Adam Ford
• [U-Boot] [PATCH v2 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready   Simon Glass
  • [U-Boot] [PATCH v2 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready   Bin Meng
    • [U-Boot] [PATCH v2 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready   Simon Glass
• [U-Boot] [PATCH 11/13] x86: braswell: Add FSP configuration   Simon Glass
  • [U-Boot] [PATCH 11/13] x86: braswell: Add FSP configuration   Bin Meng
    • [U-Boot] [PATCH 11/13] x86: braswell: Add FSP configuration   Simon Glass
  • [U-Boot] [PATCH 11/13] x86: braswell: Add FSP configuration   Bin Meng
• [U-Boot] [PATCH 5/5] x86: fsp: Configure SPI opcode registers before SPI is locked down   Simon Glass
  • [U-Boot] [PATCH 5/5] x86: fsp: Configure SPI opcode registers before SPI is locked down   Bin Meng
    • [U-Boot] [PATCH 5/5] x86: fsp: Configure SPI opcode registers before SPI is locked down   Simon Glass
• [U-Boot] [PATCH v3 0/6] x86: bootstage: Fix bootstage operation on link   Simon Glass
  • [U-Boot] [PATCH v3 1/6] board_f: Drop the timer after relocation   Simon Glass
    • [U-Boot] [PATCH v3 1/6] board_f: Drop the timer after relocation   Bin Meng
      • [U-Boot] [PATCH v3 1/6] board_f: Drop the timer after relocation   Bin Meng
  • [U-Boot] [PATCH v3 2/6] dm: x86: Allow TSC timer to be used before DM is ready   Simon Glass
    • [U-Boot] [PATCH v3 2/6] dm: x86: Allow TSC timer to be used before DM is ready   Bin Meng
  • [U-Boot] [PATCH v3 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready   Simon Glass
    • [U-Boot] [PATCH v3 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready   Bin Meng
  • [U-Boot] [PATCH v3 4/6] bootstage: Drop unused options   Simon Glass
    • [U-Boot] [PATCH v3 4/6] bootstage: Drop unused options   Bin Meng
  • [U-Boot] [PATCH v3 5/6] bootstage: Provide a separate record count setting for SPL   Simon Glass
    • [U-Boot] [PATCH v3 5/6] bootstage: Provide a separate record count setting for SPL   Bin Meng
      • [U-Boot] [PATCH v3 5/6] bootstage: Provide a separate record count setting for SPL   Bin Meng
  • [U-Boot] [PATCH v3 6/6] x86: Enable early timer for chromebook_link   Simon Glass
    • [U-Boot] [PATCH v3 6/6] x86: Enable early timer for chromebook_link   Bin Meng
• [U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229   Kever Yang
• [U-Boot] [PATCH 01/10] lib: add TPL_OF_LIBFDT option for TPL   Kever Yang
  • [U-Boot] [PATCH 01/10] lib: add TPL_OF_LIBFDT option for TPL   Simon Glass
  • [U-Boot] [U-Boot,01/10] lib: add TPL_OF_LIBFDT option for TPL   Philipp Tomsich
  • [U-Boot] [U-Boot,01/10] lib: add TPL_OF_LIBFDT option for TPL   Philipp Tomsich
• [U-Boot] [PATCH 02/10] arm: add option for TPL support in arm 32bit   Kever Yang
  • [U-Boot] [PATCH 02/10] arm: add option for TPL support in arm 32bit   Simon Glass
  • [U-Boot] [U-Boot, 02/10] arm: add option for TPL support in arm 32bit   Philipp Tomsich
  • [U-Boot] [U-Boot, 02/10] arm: add option for TPL support in arm 32bit   Philipp Tomsich
• [U-Boot] [PATCH 03/10] arm: add a separate stack for TPL   Kever Yang
  • [U-Boot] [PATCH 03/10] arm: add a separate stack for TPL   Simon Glass
  • [U-Boot] [U-Boot,03/10] arm: add a separate stack for TPL   Philipp Tomsich
  • [U-Boot] [U-Boot,03/10] arm: add a separate stack for TPL   Philipp Tomsich
• [U-Boot] [PATCH 04/10] rockchip: rk322x: enable tpl support   Kever Yang
  • [U-Boot] [PATCH 04/10] rockchip: rk322x: enable tpl support   Simon Glass
  • [U-Boot] [U-Boot,04/10] rockchip: rk322x: enable tpl support   Philipp Tomsich
  • [U-Boot] [U-Boot,04/10] rockchip: rk322x: enable tpl support   Philipp Tomsich
• [U-Boot] [PATCH 05/10] sysreset: enable driver support in SPL/TPL   Kever Yang
  • [U-Boot] [PATCH 05/10] sysreset: enable driver support in SPL/TPL   Simon Glass
    • [U-Boot] [PATCH 05/10] sysreset: enable driver support in SPL/TPL   Kever Yang
  • [U-Boot] [U-Boot, 05/10] sysreset: enable driver support in SPL/TPL   Philipp Tomsich
  • [U-Boot] [U-Boot, 05/10] sysreset: enable driver support in SPL/TPL   Philipp Tomsich
• [U-Boot] [PATCH 06/10] spl: add support to booting with OP-TEE   Kever Yang
  • [U-Boot] [PATCH 06/10] spl: add support to booting with OP-TEE   Simon Glass
  • [U-Boot] [U-Boot, 06/10] spl: add support to booting with OP-TEE   Philipp Tomsich
  • [U-Boot] [U-Boot, 06/10] spl: add support to booting with OP-TEE   Philipp Tomsich
• [U-Boot] [PATCH 07/10] rockchip: rk322x: dts: enable uart2 for SPL/TPL   Kever Yang
  • [U-Boot] [PATCH 07/10] rockchip: rk322x: dts: enable uart2 for SPL/TPL   Simon Glass
  • [U-Boot] [U-Boot, 07/10] rockchip: rk322x: dts: enable uart2 for SPL/TPL   Philipp Tomsich
  • [U-Boot] [U-Boot, 07/10] rockchip: rk322x: dts: enable uart2 for SPL/TPL   Philipp Tomsich
• [U-Boot] [PATCH 08/10] rockchip: evb-rk3229: add fit source file for itb   Kever Yang
  • [U-Boot] [PATCH 08/10] rockchip: evb-rk3229: add fit source file for itb   Simon Glass
  • [U-Boot] [U-Boot, 08/10] rockchip: evb-rk3229: add fit source file for itb   Philipp Tomsich
  • [U-Boot] [U-Boot, 08/10] rockchip: evb-rk3229: add fit source file for itb   Philipp Tomsich
• [U-Boot] [PATCH 09/10] rockchip: evb-rk3229: add README file for OP-TEE support   Kever Yang
  • [U-Boot] [PATCH 09/10] rockchip: evb-rk3229: add README file for OP-TEE support   Simon Glass
  • [U-Boot] [U-Boot, 09/10] rockchip: evb-rk3229: add README file for OP-TEE support   Philipp Tomsich
• [U-Boot] [PATCH 10/10] rockchip: evb-rk322x: update defconfig with tpl and optee support   Kever Yang
  • [U-Boot] [PATCH 10/10] rockchip: evb-rk322x: update defconfig with tpl and optee support   Simon Glass
  • [U-Boot] [U-Boot, 10/10] rockchip: evb-rk322x: update defconfig with tpl and optee support   Philipp Tomsich
  • [U-Boot] [U-Boot, 10/10] rockchip: evb-rk322x: update defconfig with tpl and optee support   Philipp Tomsich
• [U-Boot] [PATCH v2] misc: Kconfig: Add SPL_I2C_EEPROM option   Wenyou Yang
  • [U-Boot] [PATCH v2] misc: Kconfig: Add SPL_I2C_EEPROM option   Simon Glass
  • [U-Boot] [U-Boot,v2] misc: Kconfig: Add SPL_I2C_EEPROM option   Tom Rini
• [U-Boot] [PATCH v4 00/12] board: atmel: Add new board SAMA5D27-SOM1-EK board.   Wenyou Yang
  • [U-Boot] [PATCH v4 01/12] board: atmel: Create board/atmel/common folder   Wenyou Yang
  • [U-Boot] [PATCH v4 02/12] board: sama5d2_xplained: Replace code of setting mac addr   Wenyou Yang
  • [U-Boot] [PATCH v4 03/12] board: sama5d4_xplained: Set mac address from eeprom   Wenyou Yang
  • [U-Boot] [PATCH v4 04/12] lib: at91: Add logo files used via API of DM_VIDEO   Wenyou Yang
  • [U-Boot] [PATCH v4 05/12] atmel: common: Add function to display via DM_VIDEO's API   Wenyou Yang
  • [U-Boot] [PATCH v4 06/12] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2   Wenyou Yang
  • [U-Boot] [PATCH v4 07/12] ARM: at91: spl: Add mck function to lower rate while switching   Wenyou Yang
  • [U-Boot] [PATCH v4 08/12] ARM: at91: spl: Add boot device for boot from QSPI   Wenyou Yang
  • [U-Boot] [PATCH v4 09/12] board: sama5d2_xplained: Make SPL work on spiflash   Wenyou Yang
  • [U-Boot] [PATCH v4 10/12] ARM: at91: mach: Add missing defines of MPDDRC   Wenyou Yang
  • [U-Boot] [PATCH v4 11/12] ARM: at91: Get the Chip ID of SAMA5D2 SiP   Wenyou Yang
  • [U-Boot] [PATCH v4 12/12] board: atmel: Add SAMA5D27 SOM1 EK board   Wenyou Yang
• [U-Boot] [PATCH v2 1/2] tools: .gitignore: Sort in alphabetical order   Bin Meng
  • [U-Boot] [PATCH v2 2/2] tools: .gitignore: Add libfdt related files   Bin Meng
    • [U-Boot] [U-Boot, v2, 2/2] tools: .gitignore: Add libfdt related files   Tom Rini
  • [U-Boot] [U-Boot, v2, 1/2] tools: .gitignore: Sort in alphabetical order   Tom Rini
• [U-Boot] [PATCH][v2]board/ls2080ardb: Update board env based on SoC   Priyanka Jain
  • [U-Boot] [PATCH][v2]board/ls2080ardb: Update board env based on SoC   York Sun
    • [U-Boot] [PATCH][v2]board/ls2080ardb: Update board env based on SoC   Priyanka Jain
• [U-Boot] [PATCH v3 1/4] blk: Use macros for block device vendor/product/rev string size   Bin Meng
  • [U-Boot] [PATCH v3 2/4] block: ide: Fix block read/write with driver model   Bin Meng
    • [U-Boot] [PATCH v3 2/4] block: ide: Fix block read/write with driver model   Bin Meng
      • [U-Boot] [PATCH v3 2/4] block: ide: Fix block read/write with driver model   Tom Rini
      • [U-Boot] [PATCH v3 2/4] block: ide: Fix block read/write with driver model   Bin Meng
  • [U-Boot] [PATCH v3 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted   Bin Meng
  • [U-Boot] [PATCH v3 4/4] cmd: ide: Make the first device the default one   Bin Meng
• [U-Boot] [PATCH] Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED"   Paul Barker
  • [U-Boot] [PATCH] Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED"   Jonathan Gray
  • [U-Boot] [PATCH] Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED"   Simon Glass
  • [U-Boot] Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED"   Tom Rini
• [U-Boot] [PATCH] rockchip: rk3328: fix syscon id table   Kever Yang
  • [U-Boot] rockchip: rk3328: fix syscon id table   Philipp Tomsich
  • [U-Boot] rockchip: rk3328: fix syscon id table   Philipp Tomsich
  • [U-Boot] rockchip: rk3328: fix syscon id table   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: pinctrl: use fdtdec_get_int_array() to get interrupt   Kever Yang
  • [U-Boot] [PATCH] rockchip: pinctrl: use fdtdec_get_int_array() to get interrupt   Dr. Philipp Tomsich
• [U-Boot] [PATCH v3 0/2] rockchip: rk3229: add sdram support   Kever Yang
  • [U-Boot] [PATCH v3 1/2] rockchip: rk322x: add sdram driver   Kever Yang
    • [U-Boot] [U-Boot,v3,1/2] rockchip: rk322x: add sdram driver   Philipp Tomsich
  • [U-Boot] [PATCH v3 2/2] rockchip: dts: rk3229: remove dram channel info   Kever Yang
    • [U-Boot] [U-Boot, v3, 2/2] rockchip: dts: rk3229: remove dram channel info   Philipp Tomsich
• [U-Boot] [PATCH v2 1/5] rockchip: rk322x: update dram bank size   Kever Yang
  • [U-Boot] [PATCH v2 1/5] rockchip: rk322x: update dram bank size   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 0/5] configs: at91: Remove value of CONFIG_SYS_EXTRA_OPTIONS option   Wenyou Yang
  • [U-Boot] [PATCH v2 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig   Wenyou Yang
  • [U-Boot] [PATCH v2 2/5] ARM: at91: Add the SoC options to Kconfig   Wenyou Yang
  • [U-Boot] [PATCH v2 3/5] ARM: at91: Remove hardware.h included in configs   Wenyou Yang
  • [U-Boot] [PATCH v2 4/5] ARM: at91: spl: Add macro CONFIG_XXXX_BOOT support   Wenyou Yang
  • [U-Boot] [PATCH v2 5/5] configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment   Wenyou Yang
• [U-Boot] Starting u-boot in USB otg mode   rivael_il
  • [U-Boot] Starting u-boot in USB otg mode   Kever Yang
    • [U-Boot] Starting u-boot in USB otg mode   rivael_il
      • [U-Boot] Starting u-boot in USB otg mode   Maxime Ripard
      • [U-Boot] Starting u-boot in USB otg mode   rivael_il
      • [U-Boot] Starting u-boot in USB otg mode   'Maxime Ripard'
      • [U-Boot] Starting u-boot in USB otg mode   rivael_il
      • [U-Boot] Starting u-boot in USB otg mode   'Maxime Ripard'
      • [U-Boot] Starting u-boot in USB otg mode   rivael_il
      • [U-Boot] Starting u-boot in USB otg mode   'Maxime Ripard'
• [U-Boot] [PATCH 0/4] move rockchip sdram driver to driver/ram   Kever Yang
  • [U-Boot] [PATCH 1/4] rockchip: rk3399: move sdram driver to driver/ram   Kever Yang
    • [U-Boot] [U-Boot, 1/4] rockchip: rk3399: move sdram driver to driver/ram   Philipp Tomsich
    • [U-Boot] [U-Boot, 1/4] rockchip: rk3399: move sdram driver to driver/ram   Philipp Tomsich
  • [U-Boot] [PATCH 2/4] rockchip: rk3188: move sdram driver to driver/ram   Kever Yang
    • [U-Boot] [U-Boot, 2/4] rockchip: rk3188: move sdram driver to driver/ram   Philipp Tomsich
    • [U-Boot] [U-Boot, 2/4] rockchip: rk3188: move sdram driver to driver/ram   Philipp Tomsich
  • [U-Boot] [PATCH 3/4] rockchip: rk3288: move sdram driver to driver/ram   Kever Yang
    • [U-Boot] [U-Boot, 3/4] rockchip: rk3288: move sdram driver to driver/ram   Philipp Tomsich
    • [U-Boot] [U-Boot, 3/4] rockchip: rk3288: move sdram driver to driver/ram   Philipp Tomsich
  • [U-Boot] [PATCH 4/4] rockchip: rk3328: move sdram driver to driver/ram   Kever Yang
    • [U-Boot] [U-Boot, 4/4] rockchip: rk3328: move sdram driver to driver/ram   Philipp Tomsich
    • [U-Boot] [U-Boot, 4/4] rockchip: rk3328: move sdram driver to driver/ram   Philipp Tomsich
  • [U-Boot] [PATCH 0/4] move rockchip sdram driver to driver/ram   Dr. Philipp Tomsich
• [U-Boot] [RFC] ipu_common: Let the MX6 IPU clock be calculated in run-time   Fabio Estevam
• [U-Boot] [PATCH v2 13/19] ARM: dts: rockchip: prefer u-boot, dm-pre-reloc rather than u-boot, dm-spl   Heiko Stübner
• [U-Boot] [PATCH 1/1] efi_loader: move efi_guid_t typedef to efi.h   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_loader: move efi_guid_t typedef to efi.h   Alexander Graf
    • [U-Boot] [PATCH 1/1] efi_loader: move efi_guid_t typedef to efi.h   Heinrich Schuchardt
• [U-Boot] [PATCH 0/5] vsprintf and short-wchar for EFI_LOADER   Heinrich Schuchardt
  • [U-Boot] [PATCH 0/5] vsprintf and short-wchar for EFI_LOADER   Tom Rini
    • [U-Boot] [PATCH 0/5] vsprintf and short-wchar for EFI_LOADER   Rob Clark
      • [U-Boot] [PATCH 0/5] vsprintf and short-wchar for EFI_LOADER   Tom Rini
• [U-Boot] [PATCH 1/1] vsprintf: vsprintf does not have parameter size   Heinrich Schuchardt
  • [U-Boot] [U-Boot, 1/1] vsprintf: vsprintf does not have parameter size   Tom Rini
• [U-Boot] [Patch v2] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE   York Sun
  • [U-Boot] [Patch v2] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE   Sumit Garg
    • [U-Boot] [Patch v2] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE   York Sun
      • [U-Boot] [Patch v2] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE   Sumit Garg
• [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time   Fabio Estevam
  • [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time   Eric Nelson
  • [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time   Stefano Babic
  • [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time   Anatolij Gustschin
    • [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time   Fabio Estevam
      • [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time   Anatolij Gustschin
  • [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time   Anatolij Gustschin
• [U-Boot] [PATCH v1] drivers: ahci: write upper 32 bits for clb and fis registers   Suneel Garapati
  • [U-Boot] [PATCH v1] drivers: ahci: write upper 32 bits for clb and fis registers   Simon Glass
  • [U-Boot] [U-Boot, v1] drivers: ahci: write upper 32 bits for clb and fis registers   Tom Rini
• [U-Boot] [PATCH v1] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
  • [U-Boot] [PATCH v1] cmd: usb: add blk devices to ignore list in tree graph   Simon Glass
    • [U-Boot] [PATCH v1] cmd: usb: add blk devices to ignore list in tree graph   Bin Meng
      • [U-Boot] [PATCH v1] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
• [U-Boot] [PATCH V3 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5   Adam Ford
  • [U-Boot] [PATCH V3 2/5] spi: davinci_spi: Add da830-spi support for DM   Adam Ford
  • [U-Boot] [PATCH V3 3/5] arm: da850-evm: Enable DM and device tree support for da850-evm   Adam Ford
    • [U-Boot] [U-Boot, V3, 3/5] arm: da850-evm: Enable DM and device tree support for da850-evm   Tom Rini
  • [U-Boot] [PATCH V3 4/5] arm: da850-evm: Enable MTD Parts   Adam Ford
  • [U-Boot] [PATCH V3 5/5] ARM: da850-evm: Enable DM_I2C   Adam Ford
• [U-Boot] ChormeBook Tegra TK1 HP 14 " running Mainline Kernel Linux (Ubuntu - Xenial) -- Signing Kernel Almost Done !!   Alexandre N. Perfeito
• [U-Boot] [PATCH 1/1] linker_lists: remove incorrect comment   Heinrich Schuchardt
  • [U-Boot] [U-Boot,1/1] linker_lists: remove incorrect comment   Tom Rini
• [U-Boot] [PATCH v2 00/16] dtoc: Add support for 64-bit addresses   Kever Yang
• [U-Boot] [PATCH 1/2] rockchip: sdhci: update reg map for of-platdata   Kever Yang
  • [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Kever Yang
    • [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Dr. Philipp Tomsich
      • [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Kever Yang
      • [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Dr. Philipp Tomsich
      • [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Simon Glass
      • [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Kever Yang
      • [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Simon Glass
      • [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Dr. Philipp Tomsich
    • [U-Boot] [U-Boot, 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Philipp Tomsich
    • [U-Boot] [U-Boot, 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Philipp Tomsich
    • [U-Boot] [U-Boot, 2/2] rockchip: ram: rk3399: update reg map for of-platdata   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/2] rockchip: sdhci: update reg map for of-platdata   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/2] rockchip: sdhci: update reg map for of-platdata   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/2] rockchip: sdhci: update reg map for of-platdata   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: firefly-rk3399: enable SPL_SYSRESET config   Kever Yang
  • [U-Boot] [PATCH] rockchip: firefly-rk3399: enable SPL_SYSRESET config   Dr. Philipp Tomsich
    • [U-Boot] [PATCH] rockchip: firefly-rk3399: enable SPL_SYSRESET config   Kever Yang
• [U-Boot] SPI NAND Support   Suresh Gupta
  • [U-Boot] SPI NAND support   Suresh Gupta
    • [U-Boot] SPI NAND support   Jagan Teki
      • [U-Boot] SPI NAND support   Suresh Gupta
• [U-Boot] [PATCH 1/3] spl: update bl31_entry() with new name and parameter   Kever Yang
  • [U-Boot] [PATCH 2/3] spl: remove SPL_ATF_TEXT_BASE config option   Kever Yang
    • [U-Boot] [U-Boot, 2/3] spl: remove SPL_ATF_TEXT_BASE config option   Philipp Tomsich
  • [U-Boot] [PATCH 3/3] rockchip: remove CONFIG_SPL_ATF_TEXT_BASE for all boards   Kever Yang
    • [U-Boot] [U-Boot, 3/3] rockchip: remove CONFIG_SPL_ATF_TEXT_BASE for all boards   Philipp Tomsich
  • [U-Boot] [PATCH 1/3] spl: update bl31_entry() with new name and parameter   Dr. Philipp Tomsich
  • [U-Boot] [U-Boot, 1/3] spl: update bl31_entry() with new name and parameter   Philipp Tomsich
• [U-Boot] [PATCH] ARM: rmobile: Disable CONFIG_ARCH_FIXUP_FDT_MEMORY   Marek Vasut
  • [U-Boot] ARM: rmobile: Disable CONFIG_ARCH_FIXUP_FDT_MEMORY   Tom Rini
• [U-Boot] [PATCH] spl: typo fix for SPL_ATF_SUPPORT description   Kever Yang
  • [U-Boot] spl: typo fix for SPL_ATF_SUPPORT description   Tom Rini
• [U-Boot] [PATCH v3] arm64: ls1012ardb: Add distro boot support   Rajesh Bhagat
• [U-Boot] [PATCH 1/5] dm: usb: Add a new USB controller operation 'get_max_xfer_size'   Bin Meng
  • [U-Boot] [PATCH 2/5] dm: usb: xhci: Implement get_max_xfer_size() operation   Bin Meng
    • [U-Boot] [PATCH 2/5] dm: usb: xhci: Implement get_max_xfer_size() operation   Stefan Roese
  • [U-Boot] [PATCH 3/5] dm: usb: ehci: Implement get_max_xfer_size() operation   Bin Meng
    • [U-Boot] [PATCH 3/5] dm: usb: ehci: Implement get_max_xfer_size() operation   Stefan Roese
  • [U-Boot] [PATCH 4/5] usb: storage: Refactor to use max_xfer_blk from struct us_data   Bin Meng
    • [U-Boot] [PATCH 4/5] usb: storage: Refactor to use max_xfer_blk from struct us_data   Stefan Roese
  • [U-Boot] [PATCH 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled   Bin Meng
    • [U-Boot] [PATCH 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled   Stefan Roese
    • [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled   Tom Rini
      • [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled   Bin Meng
      • [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled   Tom Rini
      • [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled   Marek Vasut
      • [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled   Tom Rini
  • [U-Boot] [PATCH 1/5] dm: usb: Add a new USB controller operation 'get_max_xfer_size'   Stefan Roese
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
  • [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] net: phy: realtek: fix enabling of the TX-delay for RTL8211F   Joe Hershberger
• [U-Boot] net: nfs: Drop CONFIG_NFS_READ_SIZE   Joe Hershberger
• [U-Boot] armv8: ls1043/ls1046aqds: add support for RGMII_TXID   Joe Hershberger
• [U-Boot] net: fix typos   Joe Hershberger
• [U-Boot] [PATCH 08/23] efi_loader: allow creating new handles   Rob Clark
• [U-Boot] [PATCH v5 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform   York Sun
  • [U-Boot] [PATCH v5 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform   York Sun
• [U-Boot] [PATCH] armv8: fsl-layerscape: Fix MC reserved memory calculation   York Sun
  • [U-Boot] [PATCH] armv8: fsl-layerscape: Fix MC reserved memory calculation   York Sun
• [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support   Rob Clark
  • [U-Boot] [PATCH] dm: video: Fix cache flushes   Rob Clark
  • [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support   Simon Glass
    • [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support   Rob Clark
      • [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support   Lothar Waßmann
      • [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support   Rob Clark
      • [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support   Rob Clark
      • [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support   Simon Glass
• [U-Boot] [PATCH] net: Correct size of NFS buffers   Joe Hershberger
  • [U-Boot] [PATCH] net: Correct size of NFS buffers   Tom Rini
• [U-Boot] [PATCH] rockchip: enable SPL_SYSRESET config for all sockchip SoCs   Kever Yang
  • [U-Boot] rockchip: enable SPL_SYSRESET config for all sockchip SoCs   Philipp Tomsich
  • [U-Boot] rockchip: enable SPL_SYSRESET config for all sockchip SoCs   Philipp Tomsich
  • [U-Boot] [PATCH] rockchip: enable SPL_SYSRESET config for all sockchip SoCs   Dr. Philipp Tomsich
    • [U-Boot] [PATCH] rockchip: enable SPL_SYSRESET config for all sockchip SoCs   Kever Yang
  • [U-Boot] rockchip: enable SPL_SYSRESET config for all sockchip SoCs   Philipp Tomsich
• [U-Boot] [PATCH] arm64: ls1012afrdm: Add distro boot support   Rajesh Bhagat
• [U-Boot] [PATCH] arm64: ls1012ardb: Add distro secure boot support   Sumit Garg
• [U-Boot] mv88e61xx autoneg doesn't work with new driver   Clément Péron
  • [U-Boot] mv88e61xx autoneg doesn't work with new driver   Chris Packham
  • [U-Boot] mv88e61xx autoneg doesn't work with new driver   Clément Péron
• [U-Boot] README: Fix typo in description of CONFIG_OF_EMBED   Tom Rini
• [U-Boot] [U-Boot,v3,1/5] Kconfig: drop CONFIG_USB_ETHER_DM9601   Tom Rini
• [U-Boot] [U-Boot,v3,2/5] Kconfig: drop CONFIG_USB_ETHER_RNDIS   Tom Rini
• [U-Boot] [U-Boot, v3, 3/5] usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v3, 4/5] usb: net: migrate USB Ethernet adapters to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v3, 5/5] usb: doc: update README.usb for new config options   Tom Rini
• [U-Boot] [PATCH] env: Migrate CONFIG_ENV_AES to Kconfig and deprecate   Tom Rini
  • [U-Boot] [PATCH] env: Migrate CONFIG_ENV_AES to Kconfig and deprecate   Tom Rini
• [U-Boot] [PATCH 00/13] sunxi: convert musb to the device model and enable usb_ether   Maxime Ripard
  • [U-Boot] [PATCH 01/13] usb: gadget: Move USBNET_DEVADDR option out of g_dnl   Maxime Ripard
    • [U-Boot] [PATCH 01/13] usb: gadget: Move USBNET_DEVADDR option out of g_dnl   Simon Glass
  • [U-Boot] [PATCH 02/13] usb: gadget: Move USBNET_HOST_ADDR to Kconfig   Maxime Ripard
    • [U-Boot] [PATCH 02/13] usb: gadget: Move USBNET_HOST_ADDR to Kconfig   Simon Glass
  • [U-Boot] [PATCH 03/13] usb: gadget: Convert USB_ETHER to Kconfig   Maxime Ripard
    • [U-Boot] [PATCH 03/13] usb: gadget: Convert USB_ETHER to Kconfig   Simon Glass
  • [U-Boot] [PATCH 04/13] usb: gadget: usb_ether: Move the interfaces to Kconfig   Maxime Ripard
    • [U-Boot] [PATCH 04/13] usb: gadget: usb_ether: Move the interfaces to Kconfig   Simon Glass
  • [U-Boot] [PATCH 05/13] usb: gadget: Make g_dnl USB settings common   Maxime Ripard
    • [U-Boot] [PATCH 05/13] usb: gadget: Make g_dnl USB settings common   Łukasz Majewski
    • [U-Boot] [PATCH 05/13] usb: gadget: Make g_dnl USB settings common   Simon Glass
  • [U-Boot] [PATCH 06/13] usb: gadget: usb_ether: Move settings to common   Maxime Ripard
    • [U-Boot] [PATCH 06/13] usb: gadget: usb_ether: Move settings to common   Łukasz Majewski
    • [U-Boot] [PATCH 06/13] usb: gadget: usb_ether: Move settings to common   Simon Glass
  • [U-Boot] [PATCH 07/13] sunxi: provide default USB gadget setup   Maxime Ripard
    • [U-Boot] [PATCH 07/13] sunxi: provide default USB gadget setup   Simon Glass
  • [U-Boot] [PATCH 08/13] sunxi: imply USB_GADGET   Maxime Ripard
    • [U-Boot] [PATCH 08/13] sunxi: imply USB_GADGET   Simon Glass
  • [U-Boot] [PATCH 09/13] cmd: fastboot: Rework fastboot dependency   Maxime Ripard
    • [U-Boot] [PATCH 09/13] cmd: fastboot: Rework fastboot dependency   Simon Glass
  • [U-Boot] [PATCH 10/13] musb: sunxi: switch to the device model   Maxime Ripard
    • [U-Boot] [PATCH 10/13] musb: sunxi: switch to the device model   Simon Glass
  • [U-Boot] [PATCH 11/13] sunxi: Register usb_ether   Maxime Ripard
    • [U-Boot] [PATCH 11/13] sunxi: Register usb_ether   Simon Glass
  • [U-Boot] [PATCH 12/13] sunxi: Imply USB_ETHER   Maxime Ripard
    • [U-Boot] [PATCH 12/13] sunxi: Imply USB_ETHER   Simon Glass
  • [U-Boot] [PATCH 13/13] sunxi: sina33: Sync the device tree with the kernel   Maxime Ripard
    • [U-Boot] [PATCH 13/13] sunxi: sina33: Sync the device tree with the kernel   Simon Glass
• [U-Boot] [PATCH] fdt: call fdt_fixup_ethernet after board/system fixups   Icenowy Zheng
  • [U-Boot] [PATCH] fdt: call fdt_fixup_ethernet after board/system fixups   Tom Rini
• [U-Boot] Enc: Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")   Alexandre N. Perfeito
  • [U-Boot] Enc: Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")   Simon Glass
• [U-Boot] [PATCH 0/2] Cleanup old DRA7 pinctrl macros   Suman Anna
  • [U-Boot] [PATCH 1/2] arm: am57xx: cl-som-am57x: Use new pinctrl macros   Suman Anna
    • [U-Boot] [U-Boot, 1/2] arm: am57xx: cl-som-am57x: Use new pinctrl macros   Tom Rini
  • [U-Boot] [PATCH 2/2] ARM: DRA7: Cleanup old pinctrl macros   Suman Anna
    • [U-Boot] [U-Boot,2/2] ARM: DRA7: Cleanup old pinctrl macros   Tom Rini
• [U-Boot] [PATCH] edison: Disable CONFIG_USB_HOST_ETHER   Tom Rini
  • [U-Boot] [PATCH] edison: Disable CONFIG_USB_HOST_ETHER   Tom Rini
• [U-Boot] [PATCH 1/2] davinci: da850evm: Make EEPROM MAC code configurable   Adam Ford
  • [U-Boot] [PATCH 2/2] Convert CONFIG_MAC_ADDR_IN_SPIFLASH et al to Kconfig   Adam Ford
    • [U-Boot] [U-Boot, 2/2] Convert CONFIG_MAC_ADDR_IN_SPIFLASH et al to Kconfig   Tom Rini
  • [U-Boot] [U-Boot, 1/2] davinci: da850evm: Make EEPROM MAC code configurable   Tom Rini
• [U-Boot] [PATCH v2 1/2] imx: add macro to detect whether USB PHY is active   Stefan Agner
  • [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably   Stefan Agner
    • [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably   Eric Nelson
      • [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably   Stefan Agner
      • [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably   Eric Nelson
    • [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably   Fabio Estevam
      • [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably   Eric Nelson
      • [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably   Stefan Agner
  • [U-Boot] [PATCH v2 1/2] imx: add macro to detect whether USB PHY is active   Eric Nelson
• [U-Boot] [PATCH v2 0/5] vsprintf and short-wchar   Rob Clark
  • [U-Boot] [PATCH v2 1/5] kbuild: Enable -fshort-wchar   Rob Clark
    • [U-Boot] [PATCH v2 1/5] kbuild: Enable -fshort-wchar   Masahiro Yamada
    • [U-Boot] [U-Boot,v2,1/5] kbuild: Enable -fshort-wchar   Tom Rini
  • [U-Boot] [PATCH v2 2/5] lib: add some utf16 handling helpers   Rob Clark
    • [U-Boot] [PATCH v2 2/5] lib: add some utf16 handling helpers   Alexander Graf
      • [U-Boot] [PATCH v2 2/5] lib: add some utf16 handling helpers   Rob Clark
      • [U-Boot] [PATCH v2 2/5] lib: add some utf16 handling helpers   Alexander Graf
    • [U-Boot] [U-Boot,v2,2/5] lib: add some utf16 handling helpers   Tom Rini
  • [U-Boot] [PATCH v2 3/5] vsprintf.c: add UTF-16 string (%ls) support   Rob Clark
    • [U-Boot] [PATCH v2 3/5] vsprintf.c: add UTF-16 string (%ls) support   Simon Glass
    • [U-Boot] [U-Boot, v2, 3/5] vsprintf.c: add UTF-16 string (%ls) support   Tom Rini
  • [U-Boot] [PATCH v2 4/5] vsprintf.c: add GUID printing   Rob Clark
    • [U-Boot] [PATCH v2 4/5] vsprintf.c: add GUID printing   Simon Glass
    • [U-Boot] [U-Boot,v2,4/5] vsprintf.c: add GUID printing   Tom Rini
  • [U-Boot] [PATCH v2 5/5] examples: add fallback memcpy   Rob Clark
    • [U-Boot] [U-Boot,v2,5/5] examples: add fallback memcpy   Tom Rini
• [U-Boot] VU#166743: Das U-Boot AES-CBC encryption   Blibbet
  • [U-Boot] VU#166743: Das U-Boot AES-CBC encryption   Tom Rini
• [U-Boot] [PATCH v3 0/9] fs/fat: cleanups + readdir implementation   Rob Clark
  • [U-Boot] [PATCH v3 1/9] fs/fat: split out helper to init fsdata   Rob Clark
    • [U-Boot] [U-Boot, v3, 1/9] fs/fat: split out helper to init fsdata   Tom Rini
  • [U-Boot] [PATCH v3 2/9] fs/fat: introduce new director iterators   Rob Clark
    • [U-Boot] [U-Boot, v3, 2/9] fs/fat: introduce new director iterators   Tom Rini
  • [U-Boot] [PATCH v3 3/9] fat/fs: convert to directory iterators   Rob Clark
    • [U-Boot] [PATCH v3 3/9] fat/fs: convert to directory iterators   Simon Glass
    • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Tom Rini
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Adam Ford
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Rob Clark
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Adam Ford
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Rob Clark
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Rob Clark
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Rob Clark
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Tom Rini
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Adam Ford
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Rob Clark
      • [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators   Adam Ford
  • [U-Boot] [PATCH v3 4/9] fs: add fs_readdir()   Rob Clark
    • [U-Boot] [PATCH v3 4/9] fs: add fs_readdir()   Simon Glass
    • [U-Boot] [U-Boot,v3,4/9] fs: add fs_readdir()   Tom Rini
  • [U-Boot] [PATCH v3 5/9] fs/fat: implement opendir/readdir/closedir   Rob Clark
    • [U-Boot] [PATCH v3 5/9] fs/fat: implement opendir/readdir/closedir   Simon Glass
    • [U-Boot] [U-Boot, v3, 5/9] fs/fat: implement opendir/readdir/closedir   Tom Rini
  • [U-Boot] [PATCH v3 6/9] fat/fs: remove a bunch of dead code   Rob Clark
    • [U-Boot] [U-Boot,v3,6/9] fat/fs: remove a bunch of dead code   Tom Rini
  • [U-Boot] [PATCH v3 7/9] fat/fs: move ls to generic implementation   Rob Clark
    • [U-Boot] [U-Boot, v3, 7/9] fat/fs: move ls to generic implementation   Tom Rini
  • [U-Boot] [PATCH v3 8/9] fs/fat: fix case for FAT shortnames   Rob Clark
    • [U-Boot] [PATCH v3 8/9] fs/fat: fix case for FAT shortnames   Simon Glass
    • [U-Boot] [U-Boot,v3,8/9] fs/fat: fix case for FAT shortnames   Tom Rini
  • [U-Boot] [PATCH v3 9/9] fs/fat: Clean up open-coded sector <-> cluster conversions   Rob Clark
    • [U-Boot] [PATCH v3 9/9] fs/fat: Clean up open-coded sector <-> cluster conversions   Simon Glass
    • [U-Boot] [U-Boot, v3, 9/9] fs/fat: Clean up open-coded sector <-> cluster conversions   Tom Rini
• [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes   Heinrich Schuchardt
  • [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes   Bin Meng
  • [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes   Heinrich Schuchardt
    • [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes   Bin Meng
      • [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes   Heinrich Schuchardt
      • [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes   Bin Meng
      • [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes   Heinrich Schuchardt
• [U-Boot] [PATCH v2 00/21] efi_loader: enough UEFI for standard distro boot   Rob Clark
  • [U-Boot] [PATCH v3 1/9] fs/fat: split out helper to init fsdata   Rob Clark
  • [U-Boot] [PATCH v2 01/21] part: move efi_guid_t   Rob Clark
    • [U-Boot] [PATCH v2 01/21] part: move efi_guid_t   Heinrich Schuchardt
    • [U-Boot] [PATCH v2 01/21] part: move efi_guid_t   Simon Glass
  • [U-Boot] [PATCH v3 2/9] fs/fat: introduce new director iterators   Rob Clark
    • [U-Boot] [PATCH v3 2/9] fs/fat: introduce new director iterators   Simon Glass
  • [U-Boot] [PATCH v2 02/21] part: extract MBR signature from partitions   Rob Clark
    • [U-Boot] [PATCH v2 02/21] part: extract MBR signature from partitions   Simon Glass
  • [U-Boot] [PATCH v2 03/21] efi: add some missing __packed   Rob Clark
    • [U-Boot] [PATCH v2 03/21] efi: add some missing __packed   Simon Glass
  • [U-Boot] [PATCH v3 3/9] fat/fs: convert to directory iterators   Rob Clark
  • [U-Boot] [PATCH v2 04/21] efi: add some more device path structures   Rob Clark
    • [U-Boot] [PATCH v2 04/21] efi: add some more device path structures   Simon Glass
  • [U-Boot] [PATCH v3 4/9] fs: add fs_readdir()   Rob Clark
  • [U-Boot] [PATCH v2 05/21] efi_loader: add device-path utils   Rob Clark
    • [U-Boot] [PATCH v2 05/21] efi_loader: add device-path utils   Simon Glass
      • [U-Boot] [PATCH v2 05/21] efi_loader: add device-path utils   Rob Clark
  • [U-Boot] [PATCH v3 5/9] fs/fat: implement opendir/readdir/closedir   Rob Clark
  • [U-Boot] [PATCH v2 06/21] efi_loader: drop redundant efi_device_path_protocol   Rob Clark
  • [U-Boot] [PATCH v3 6/9] fat/fs: remove a bunch of dead code   Rob Clark
  • [U-Boot] [PATCH v2 07/21] efi_loader: flesh out device-path to text   Rob Clark
  • [U-Boot] [PATCH v3 7/9] fat/fs: move ls to generic implementation   Rob Clark
  • [U-Boot] [PATCH v2 08/21] efi_loader: use proper device-paths for partitions   Rob Clark
  • [U-Boot] [PATCH v3 8/9] fs/fat: fix case for FAT shortnames   Rob Clark
  • [U-Boot] [PATCH v2 09/21] efi_loader: use proper device-paths for net   Rob Clark
  • [U-Boot] [PATCH v3 9/9] fs/fat: Clean up open-coded sector <-> cluster conversions   Rob Clark
  • [U-Boot] [PATCH v2 10/21] efi_loader: refactor boot device and loaded_image handling   Rob Clark
  • [U-Boot] [PATCH v2 11/21] efi_loader: add file/filesys support   Rob Clark
    • [U-Boot] [PATCH v2 11/21] efi_loader: add file/filesys support   Simon Glass
  • [U-Boot] [PATCH v2 12/21] efi_loader: support load_image() from a file-path   Rob Clark
  • [U-Boot] [PATCH v2 13/21] efi_loader: make pool allocations cacheline aligned   Rob Clark
  • [U-Boot] [PATCH v2 14/21] efi_loader: efi variable support   Rob Clark
    • [U-Boot] [PATCH v2 14/21] efi_loader: efi variable support   Simon Glass
      • [U-Boot] [PATCH v2 14/21] efi_loader: efi variable support   Rob Clark
  • [U-Boot] [PATCH v2 15/21] efi_loader: add bootmgr   Rob Clark
    • [U-Boot] [PATCH v2 15/21] efi_loader: add bootmgr   Simon Glass
  • [U-Boot] [PATCH v2 16/21] efi_loader: file_path should be variable length   Rob Clark
  • [U-Boot] [PATCH v2 17/21] efi_loader: set loaded image code/data type properly   Rob Clark
  • [U-Boot] [PATCH v2 18/21] efi_loader: print GUIDs   Rob Clark
  • [U-Boot] [PATCH v2 19/21] efi_loader: split out escape sequence based size query   Rob Clark
  • [U-Boot] [PATCH v2 20/21] efi_loader: Correctly figure out size for vidconsole   Rob Clark
  • [U-Boot] [PATCH v2 21/21] efi_loader: Some console improvements for vidconsole   Rob Clark
    • [U-Boot] [PATCH v2 21/21] efi_loader: Some console improvements for vidconsole   Simon Glass
  • [U-Boot] [PATCH v2 00/21] efi_loader: enough UEFI for standard distro boot   Rob Clark
• [U-Boot] [PATCH v4 1/4] blk: Use macros for block device vendor/product/rev string size   Bin Meng
  • [U-Boot] [PATCH v4 2/4] block: ide: Fix block read/write with driver model   Bin Meng
    • [U-Boot] [PATCH v4 2/4] block: ide: Fix block read/write with driver model   Tom Rini
  • [U-Boot] [PATCH v4 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted   Bin Meng
    • [U-Boot] [PATCH v4 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted   Tom Rini
  • [U-Boot] [PATCH v4 4/4] cmd: ide: Make the first device the default one   Bin Meng
    • [U-Boot] [PATCH v4 4/4] cmd: ide: Make the first device the default one   Tom Rini
  • [U-Boot] [PATCH v4 1/4] blk: Use macros for block device vendor/product/rev string size   Tom Rini
• [U-Boot] [PATCH v1 00/12] efi_loader+video: support for Shell.efi   Rob Clark
  • [U-Boot] [PATCH v1 01/12] efi_loader: add stub EFI_DEVICE_PATH_UTILITIES_PROTOCOL   Rob Clark
  • [U-Boot] [PATCH v1 02/12] efi_loader: add stub HII protocols   Rob Clark
  • [U-Boot] [PATCH v1 03/12] efi_loader: add EFI_UNICODE_COLLATION_PROTOCOL stub   Rob Clark
  • [U-Boot] [PATCH v1 04/12] efi_loader: start fleshing out HII   Rob Clark
  • [U-Boot] [PATCH v1 05/12] efi_loader: flesh out unicode protocol   Rob Clark
  • [U-Boot] [PATCH v1 06/12] efi_loader: start fleshing out efi_device_path_utilities   Rob Clark
  • [U-Boot] [PATCH v1 07/12] efi_loader: SIMPLE_TEXT_INPUT_EX plus wire up objects properly   Rob Clark
  • [U-Boot] [PATCH v1 08/12] efi_loader: console support for color attributes   Rob Clark
  • [U-Boot] [PATCH v1 09/12] dm: video: Fix cache flushes   Rob Clark
  • [U-Boot] [PATCH v1 10/12] dm: video: Add basic ANSI escape sequence support   Rob Clark
    • [U-Boot] [PATCH v1 10/12] dm: video: Add basic ANSI escape sequence support   Simon Glass
      • [U-Boot] [PATCH v1 10/12] dm: video: Add basic ANSI escape sequence support   Rob Clark
  • [U-Boot] [PATCH v1 11/12] dm: video: Add color ANSI escape sequence support   Rob Clark
  • [U-Boot] [PATCH v1 12/12] HACK: efi_loader: hacks for SCT   Rob Clark
• [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig   Lukasz Majewski
  • [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig   Tom Rini
    • [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig   Łukasz Majewski
      • [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig   Tom Rini
      • [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig   Łukasz Majewski
• [U-Boot] [PATCH] armv8: fsl-layerscape: Add back L3 flushing for all exception levels   York Sun
  • [U-Boot] [PATCH] armv8: fsl-layerscape: Add back L3 flushing for all exception levels   York Sun
• [U-Boot] [PATCH] rockchip: add support for backing to bootrom download mode   Andy Yan
  • [U-Boot] [PATCH] rockchip: add support for backing to bootrom download mode   Kever Yang
  • [U-Boot] rockchip: add support for backing to bootrom download mode   Philipp Tomsich
  • [U-Boot] rockchip: add support for backing to bootrom download mode   Philipp Tomsich
    • [U-Boot] rockchip: add support for backing to bootrom download mode   Andy Yan
      • [U-Boot] rockchip: add support for backing to bootrom download mode   Dr. Philipp Tomsich
      • [U-Boot] rockchip: add support for backing to bootrom download mode   Andy Yan
      • [U-Boot] rockchip: add support for backing to bootrom download mode   Dr. Philipp Tomsich
      • [U-Boot] rockchip: add support for backing to bootrom download mode   Andy Yan
      • [U-Boot] rockchip: add support for backing to bootrom download mode   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 00/19] rockchip: convert the RK3368 to OF_LIVE and validate on the RK3368-uQ7   Philipp Tomsich
  • [U-Boot] [PATCH v2 06/19] net: phy: micrel: Convert to livetree   Philipp Tomsich
    • [U-Boot] [PATCH v2 06/19] net: phy: micrel: Convert to livetree   Joe Hershberger
      • [U-Boot] [PATCH v2 06/19] net: phy: micrel: Convert to livetree   Dr. Philipp Tomsich
  • [U-Boot] [PATCH v2 07/19] rockchip: mmc: convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v2 08/19] rockchip: timer: implement timer_get_boot_us   Philipp Tomsich
  • [U-Boot] [PATCH v2 09/19] rockchip: timer: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v2 10/19] rockchip: clk: rk3368: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v2 11/19] rockchip: pinctrl: rk3368: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v2 12/19] rockchip: spi: Convert to livetree   Philipp Tomsich
    • [U-Boot] [PATCH v2 12/19] rockchip: spi: Convert to livetree   Jagan Teki
  • [U-Boot] [PATCH v2 13/19] rockchip: sdhci: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v2 14/19] rockchip: rk8xx: remove unused header includes   Philipp Tomsich
  • [U-Boot] [PATCH v2 15/19] rockchip: i2c: Convert to livetree   Philipp Tomsich
    • [U-Boot] [PATCH v2 15/19] rockchip: i2c: Convert to livetree   Heiko Schocher
    • [U-Boot] [PATCH v2 15/19] rockchip: i2c: Convert to livetree   Simon Glass
  • [U-Boot] [PATCH v2 16/19] rockchip: gpio: convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v2 17/19] rockchip: gpio: remove outdated/misleading comment   Philipp Tomsich
  • [U-Boot] [PATCH v2 18/19] rockchip: dts: rk3368-lion: add /chosen/tick-timer   Philipp Tomsich
  • [U-Boot] [PATCH v2 19/19] rockchip: lion-rk3368: defconfig: resync w/ OF_LIVE and BOOTSTAGE enabled   Philipp Tomsich
• [U-Boot] [PATCH v2 01/19] bootstage: adjust Makefile to allow including bootstage in SPL, but not in TPL   Philipp Tomsich
• [U-Boot] [PATCH v2 02/19] dm: timer: Convert to livetree   Philipp Tomsich
• [U-Boot] [PATCH v2 03/19] dm: timer: handle being called before dm_root is ready   Philipp Tomsich
• [U-Boot] [PATCH v2 04/19] dm: core: add dev_read_addr_ptr()   Philipp Tomsich
  • [U-Boot] [PATCH v2 04/19] dm: core: add dev_read_addr_ptr()   Simon Glass
• [U-Boot] [PATCH v2 05/19] net: designware: Convert to livetree   Philipp Tomsich
• [U-Boot] [PATCH v3] rk3288: Add Vyasa initial board support   Jagan Teki
• [U-Boot] [PATCH 1/2] board: lion_rk3368: update README flash instructions   Philipp Tomsich
  • [U-Boot] [PATCH 2/2] board: puma_rk3399: update README flash instructions   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3399: spl: remove hard-coded addresses for GRF and SGRF   Philipp Tomsich
  • [U-Boot] [PATCH] rockchip: rk3399: spl: remove hard-coded addresses for GRF and SGRF   Simon Glass
  • [U-Boot] [PATCH] rockchip: rk3399: spl: remove hard-coded addresses for GRF and SGRF   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3399: spl: convert to using BOOT_DEVICE_BOOTROM   Philipp Tomsich
  • [U-Boot] [PATCH] rockchip: rk3399: spl: convert to using BOOT_DEVICE_BOOTROM   Simon Glass
  • [U-Boot] rockchip: rk3399: spl: convert to using BOOT_DEVICE_BOOTROM   Philipp Tomsich
• [U-Boot] [PATCH 00/10] For the RK3399-Q7, we have a few additional features in the SPL boot   Philipp Tomsich
  • [U-Boot] [PATCH 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()   Philipp Tomsich
    • [U-Boot] [PATCH 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()   Simon Glass
  • [U-Boot] [PATCH 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order   Philipp Tomsich
    • [U-Boot] [PATCH 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order   Simon Glass
      • [U-Boot] [PATCH 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order   Dr. Philipp Tomsich
  • [U-Boot] [PATCH 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()   Philipp Tomsich
    • [U-Boot] [PATCH 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()   Simon Glass
      • [U-Boot] [PATCH 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()   Dr. Philipp Tomsich
  • [U-Boot] [PATCH 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order   Philipp Tomsich
    • [U-Boot] [PATCH 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order   Simon Glass
  • [U-Boot] [PATCH 07/10] rockchip: puma-rk3399: update board_init()   Philipp Tomsich
    • [U-Boot] [PATCH 07/10] rockchip: puma-rk3399: update board_init()   Simon Glass
  • [U-Boot] [PATCH 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE   Philipp Tomsich
    • [U-Boot] [PATCH 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE   Simon Glass
  • [U-Boot] [PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig   Philipp Tomsich
    • [U-Boot] [PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig   Simon Glass
      • [U-Boot] [PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig   Dr. Philipp Tomsich
      • [U-Boot] [PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig   Simon Glass
  • [U-Boot] [PATCH 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL   Philipp Tomsich
    • [U-Boot] [PATCH 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL   Simon Glass
• [U-Boot] [PATCH 01/10] rockchip: rk3399: make spl_board_init board-specific   Philipp Tomsich
  • [U-Boot] [PATCH 01/10] rockchip: rk3399: make spl_board_init board-specific   Simon Glass
• [U-Boot] [PATCH 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source   Philipp Tomsich
  • [U-Boot] [PATCH 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source   Simon Glass
• [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface   Philipp Tomsich
  • [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface   Kever Yang
    • [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface   Dr. Philipp Tomsich
      • [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface   Marek Vasut
      • [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface   Dr. Philipp Tomsich
• [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410: Maintainer changed   Jorge Ramirez-Ortiz
  • [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410: Maintainer changed   Fabio Estevam
    • [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410: Maintainer changed   Jorge Ramirez
• [U-Boot] [PATCH] efi_loader: Decouple EFI input/output from stdin/stdout   Rob Clark
• [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410c: Maintainer changed   Jorge Ramirez-Ortiz
  • [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410c: Maintainer changed   Tom Rini
    • [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410c: Maintainer changed   Nicolas Dechesne
  • [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410c: Maintainer changed   Mateusz Kulikowski
• [U-Boot] [PATCH 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1   Philipp Tomsich
  • [U-Boot] [PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator   Philipp Tomsich
    • [U-Boot] [PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator   Simon Glass
  • [U-Boot] [PATCH 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1   Simon Glass
• [U-Boot] [PATCH v2 0/2] Allwinner DE2 HDMI SimpleFB support   Icenowy Zheng
  • [U-Boot] [PATCH v2 1/2] video: sunxi: extract simplefb match code to a new file   Icenowy Zheng
    • [U-Boot] [linux-sunxi] [PATCH v2 1/2] video: sunxi: extract simplefb match code to a new file   Andre Przywara
  • [U-Boot] [PATCH v2 2/2] sunxi: setup simplefb for Allwinner DE2   Icenowy Zheng
    • [U-Boot] [PATCH v2 2/2] sunxi: setup simplefb for Allwinner DE2   Maxime Ripard
      • [U-Boot] [PATCH v2 2/2] sunxi: setup simplefb for Allwinner DE2   icenowy at aosc.io
      • [U-Boot] [PATCH v2 2/2] sunxi: setup simplefb for Allwinner DE2   Maxime Ripard
• [U-Boot] [ANN] U-Boot v2017.09 is released   Tom Rini
  • [U-Boot] [ANN] U-Boot v2017.09 is released   Wolfgang Denk
• [U-Boot] [PATCH v2] i2c: muxes: pca954x: Add support for GPIO reset line   Moritz Fischer
  • [U-Boot] [PATCH v2] i2c: muxes: pca954x: Add support for GPIO reset line   Heiko Schocher
    • [U-Boot] [PATCH v2] i2c: muxes: pca954x: Add support for GPIO reset line   Heiko Schocher
  • [U-Boot] [PATCH v2] i2c: muxes: pca954x: Add support for GPIO reset line   Simon Glass
• [U-Boot] [PATCH v2 1/2] rockchip: board: lion_rk3368: update README flash instructions   Klaus Goger
  • [U-Boot] [PATCH v2 2/2] rockchip: board: puma_rk3399: update README flash instructions   Klaus Goger
    • [U-Boot] [U-Boot, v2, 2/2] rockchip: board: puma_rk3399: update README flash instructions   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 2/2] rockchip: board: puma_rk3399: update README flash instructions   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 2/2] rockchip: board: puma_rk3399: update README flash instructions   Philipp Tomsich
  • [U-Boot] [U-Boot, v2, 1/2] rockchip: board: lion_rk3368: update README flash instructions   Philipp Tomsich
  • [U-Boot] [U-Boot, v2, 1/2] rockchip: board: lion_rk3368: update README flash instructions   Philipp Tomsich
  • [U-Boot] [U-Boot, v2, 1/2] rockchip: board: lion_rk3368: update README flash instructions   Philipp Tomsich
• [U-Boot] [PATCH v3 00/19] rockchip: convert the RK3368 to OF_LIVE and validate on the RK3368-uQ7   Philipp Tomsich
  • [U-Boot] [PATCH v3 05/19] net: designware: Convert to livetree   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 05/19] net: designware: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 06/19] net: phy: micrel: Convert to livetree   Philipp Tomsich
    • [U-Boot] [PATCH v3 06/19] net: phy: micrel: Convert to livetree   Simon Glass
    • [U-Boot] [U-Boot, v3, 06/19] net: phy: micrel: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 07/19] rockchip: mmc: convert to livetree   Philipp Tomsich
    • [U-Boot] [U-Boot,v3,07/19] rockchip: mmc: convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 08/19] rockchip: timer: implement timer_get_boot_us   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 08/19] rockchip: timer: implement timer_get_boot_us   Philipp Tomsich
  • [U-Boot] [PATCH v3 09/19] rockchip: timer: Convert to livetree   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 09/19] rockchip: timer: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 10/19] rockchip: clk: rk3368: Convert to livetree   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 10/19] rockchip: clk: rk3368: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 11/19] rockchip: pinctrl: rk3368: Convert to livetree   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 11/19] rockchip: pinctrl: rk3368: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 12/19] rockchip: spi: Convert to livetree   Philipp Tomsich
    • [U-Boot] [U-Boot,v3,12/19] rockchip: spi: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 13/19] rockchip: sdhci: Convert to livetree   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 13/19] rockchip: sdhci: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 14/19] rockchip: rk8xx: remove unused header includes   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 14/19] rockchip: rk8xx: remove unused header includes   Philipp Tomsich
  • [U-Boot] [PATCH v3 15/19] rockchip: i2c: Convert to livetree   Philipp Tomsich
    • [U-Boot] [U-Boot,v3,15/19] rockchip: i2c: Convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 16/19] rockchip: gpio: convert to livetree   Philipp Tomsich
    • [U-Boot] [U-Boot,v3,16/19] rockchip: gpio: convert to livetree   Philipp Tomsich
  • [U-Boot] [PATCH v3 17/19] rockchip: gpio: remove outdated/misleading comment   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 17/19] rockchip: gpio: remove outdated/misleading comment   Philipp Tomsich
  • [U-Boot] [PATCH v3 18/19] rockchip: dts: rk3368-lion: add /chosen/tick-timer   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 18/19] rockchip: dts: rk3368-lion: add /chosen/tick-timer   Philipp Tomsich
  • [U-Boot] [PATCH v3 19/19] rockchip: lion-rk3368: defconfig: resync w/ OF_LIVE and BOOTSTAGE enabled   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 19/19] rockchip: lion-rk3368: defconfig: resync w/ OF_LIVE and BOOTSTAGE enabled   Philipp Tomsich
• [U-Boot] [PATCH v3 01/19] bootstage: adjust Makefile to allow including bootstage in SPL, but not in TPL   Philipp Tomsich
  • [U-Boot] [U-Boot, v3, 01/19] bootstage: adjust Makefile to allow including bootstage in SPL, but not in TPL   Philipp Tomsich
• [U-Boot] [PATCH v3 02/19] dm: timer: Convert to livetree   Philipp Tomsich
  • [U-Boot] [U-Boot,v3,02/19] dm: timer: Convert to livetree   Philipp Tomsich
• [U-Boot] [PATCH v3 03/19] dm: timer: handle being called before dm_root is ready   Philipp Tomsich
  • [U-Boot] [U-Boot, v3, 03/19] dm: timer: handle being called before dm_root is ready   Philipp Tomsich
• [U-Boot] [PATCH v3 04/19] dm: core: add dev_read_addr_ptr()   Philipp Tomsich
  • [U-Boot] [U-Boot,v3,04/19] dm: core: add dev_read_addr_ptr()   Philipp Tomsich
• [U-Boot] [U-Boot,1/3] rk3288: vyasa: Add TPL support   Philipp Tomsich
• [U-Boot] [U-Boot,2/3] rk3288: vyasa: Add falcon mode support   Philipp Tomsich
  • [U-Boot] [U-Boot,2/3] rk3288: vyasa: Add falcon mode support   Philipp Tomsich
  • [U-Boot] [U-Boot,2/3] rk3288: vyasa: Add falcon mode support   Philipp Tomsich
• [U-Boot] [U-Boot,3/3] rk3288: spl: Add dram_init_banksize   Philipp Tomsich
  • [U-Boot] [U-Boot,3/3] rk3288: spl: Add dram_init_banksize   Philipp Tomsich
  • [U-Boot] [U-Boot,3/3] rk3288: spl: Add dram_init_banksize   Philipp Tomsich
• [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support   Philipp Tomsich
  • [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support   Philipp Tomsich
  • [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support   Philipp Tomsich
    • [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support   Dr. Philipp Tomsich
      • [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support   Jagan Teki
      • [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support   Dr. Philipp Tomsich
• [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget   Philipp Tomsich
  • [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget   Łukasz Majewski
    • [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget   Dr. Philipp Tomsich
      • [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget   Łukasz Majewski
  • [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget   Philipp Tomsich
• [U-Boot] [U-Boot,V9,2/4] usb: rockchip: add rockusb command   Philipp Tomsich
• [U-Boot] [U-Boot, V9, 3/4] rockchip:usb: add a simple readme for rockusb   Philipp Tomsich
• [U-Boot] [U-Boot, V9, 4/4] rockchip: rk3288: enable rockusb support on rk3288 based device   Philipp Tomsich
• [U-Boot] [PATCH] u-boot: Upgrade to 2017.09   Otavio Salvador
  • [U-Boot] [PATCH] u-boot: Upgrade to 2017.09   Marek Vasut
    • [U-Boot] [PATCH] u-boot: Upgrade to 2017.09   Otavio Salvador
      • [U-Boot] [PATCH] u-boot: Upgrade to 2017.09   Marek Vasut
      • [U-Boot] [PATCH] u-boot: Upgrade to 2017.09   Otavio Salvador
      • [U-Boot] [PATCH] u-boot: Upgrade to 2017.09   Marek Vasut
  • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Martin Jansa
    • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Martin Jansa
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Marek Vasut
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Martin Jansa
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Marek Vasut
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Martin Jansa
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Philip Balister
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Otavio Salvador
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Burton, Ross
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Tom Rini
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Marek Vasut
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Philip Balister
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Marek Vasut
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Moritz Fischer
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Martin Jansa
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Marek Vasut
    • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Khem Raj
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Łukasz Majewski
      • [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09   Randy MacLeod
• [U-Boot] [PATCH] lib: strto: fix incorrect handling of specified base   Rob Clark
  • [U-Boot] [PATCH] lib: strto: fix incorrect handling of specified base   Simon Glass
  • [U-Boot] lib: strto: fix incorrect handling of specified base   Tom Rini
• [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections   Dr. Philipp Tomsich
    • [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections   Heinrich Schuchardt
      • [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections   Bin Meng
      • [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections   Simon Glass
• [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused variables   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused variables   Simon Glass
  • [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused variables   Bin Meng
    • [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused variables   Bin Meng
• [U-Boot] [PATCH] nds32: board: Fix andestech adp-ae3xx.c make fail problem.   Andes
• [U-Boot] [PATCH] nds32: bootm: Fix warning of struct tag_serialnr declared   Andes
• [U-Boot] [PATCH] cmd: set filesize variable in ubi read   Heiko Schocher
  • [U-Boot] [PATCH] cmd: set filesize variable in ubi read   Holger Dengler
• [U-Boot] [PATCH v2 1/1] checkpatch: update from Linux v4.13-rc6   Heinrich Schuchardt
  • [U-Boot] [U-Boot, v2, 1/1] checkpatch: update from Linux v4.13-rc6   Tom Rini
    • [U-Boot] [PATCH 1/1] checkpatch.pl: Add warning for new __packed additions   Heinrich Schuchardt
      • [U-Boot] [U-Boot, 1/1] checkpatch.pl: Add warning for new __packed additions   Tom Rini
  • [U-Boot] [U-Boot, v2, 1/1] checkpatch: update from Linux v4.13-rc6   Tom Rini
• [U-Boot] u-boot ubifsload & verify uImage   Johann Obermayr
  • [U-Boot] u-boot ubifsload & verify uImage   Heiko Schocher
    • [U-Boot] u-boot ubifsload & verify uImage   Johann Obermayr
• [U-Boot] [RFC 1/1] efi_loader: fix building of helloworld.efi on x86_64   Heinrich Schuchardt
  • [U-Boot] [RFC 1/1] efi_loader: fix building of helloworld.efi on x86_64   Alexander Graf
  • [U-Boot] [RFC 1/1] efi_loader: fix building of helloworld.efi on x86_64   Bin Meng
    • [U-Boot] [RFC 1/1] efi_loader: fix building of helloworld.efi on x86_64   Heinrich Schuchardt
• [U-Boot] [PATCH v1] cmd: set filesize variable in ubi read   Heiko Schocher
  • [U-Boot] [PATCH v1] cmd: set filesize variable in ubi read   Holger Dengler
    • [U-Boot] [PATCH v1] cmd: set filesize variable in ubi read   Heiko Schocher
• [U-Boot] [PATCH] cmd: usb: check usb_stor_curr_dev in usb dev with no parameter   Patrick DELAUNAY
• [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning   Marek Vasut
    • [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning   Masahiro Yamada
      • [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning   Marek Vasut
• [U-Boot] [PATCH v2] cmd: usb: add check on usb_stor_curr_dev in usb dev command   Patrick Delaunay
  • [U-Boot] [PATCH v2] cmd: usb: add check on usb_stor_curr_dev in usb dev command   Patrick DELAUNAY
• [U-Boot] [RESEND PATCH v2] cmd: set filesize variable in ubi read   Holger Dengler
• [U-Boot] [PATCH] moveconfig: Use fd.write() instead of print >>   sjg at google.com
• [U-Boot] [PATCH] genconfig.py: Print defconfig next to warnings   sjg at google.com
• [U-Boot] [PATCH v2 2/2] dm: core: Show driver name with 'dm tree'   sjg at google.com
• [U-Boot] [PATCH v2 1/2] dm: core: Drop use of strlcpy()   sjg at google.com
• [U-Boot] [PATCH 2/2] sandbox: Convert SANDBOX_BITS_PER_LONG to Kconfig   sjg at google.com
• [U-Boot] [PATCH 1/2] sandbox: Introduce Kconfig option for 32/64 bit host   sjg at google.com
• [U-Boot] [PATCH v4] rk3288: Add Vyasa initial board support   Jagan Teki
  • [U-Boot] [U-Boot,v4] rk3288: Add Vyasa initial board support   Philipp Tomsich
• [U-Boot] [PATCH v4 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v4 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Tom Rini
  • [U-Boot] [PATCH v4 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Simon Glass
• [U-Boot] [U-Boot, v2, 01/13] arm: omap5+: Add board specific ldo powering   Tom Rini
• [U-Boot] [U-Boot, v2, 02/13] palmas: Add support for powering different ldos   Tom Rini
• [U-Boot] [U-Boot, v2, 03/13] arm: dra7: Kconfig: Select LP87565 related configs   Tom Rini
• [U-Boot] [U-Boot, v2, 04/13] arm: dra76: Add support for ES1.0 detection   Tom Rini
• [U-Boot] [U-Boot, v2, 05/13] board: ti: dra76-evm: Add epprom support   Tom Rini
• [U-Boot] [U-Boot, v2, 06/13] board: ti: dra76-evm: Add the pmic data   Tom Rini
• [U-Boot] [U-Boot,v2,07/13] board: ti: dra76-evm: Add DDR data   Tom Rini
• [U-Boot] [U-Boot, v2, 08/13] board: ti: dra76-evm: Add the pinmux data   Tom Rini
• [U-Boot] [U-Boot, v2, 09/13] board: ti: dra76-evm: Add support for powering on mmc ldo   Tom Rini
• [U-Boot] [U-Boot, v2, 10/13] env: ti: boot: Select dtb name for dra76   Tom Rini
• [U-Boot] [U-Boot, v2, 11/13] arm: dts: dra7: sync DT with latest Linux   Tom Rini
• [U-Boot] [U-Boot, v2, 12/13] arm: dts: Add u-boot specific compatibles   Tom Rini
• [U-Boot] [U-Boot,v2,13/13] board: ti: dra76: Add dt support   Tom Rini
• [U-Boot] board: ti: am571x: Add 666MHz support for AM571x IDK   Tom Rini
• [U-Boot] [U-Boot, 1/2] board: ti: am57xx: Add dt support for BeagleBoard-X15 revC   Tom Rini
• [U-Boot] [U-Boot, 2/2] env: ti: boot: Select dtb name for X15 revC   Tom Rini
• [U-Boot] [PATCH v3] i2c: muxes: pca954x: Add support for GPIO reset line   Moritz Fischer
  • [U-Boot] [PATCH v3] i2c: muxes: pca954x: Add support for GPIO reset line   Heiko Schocher
• [U-Boot] [PATCH 0/3] support enter download mode on rockchip platform   Andy Yan
  • [U-Boot] [PATCH 1/3] rockchip: make boot_mode releated codes reused across all platforms   Andy Yan
    • [U-Boot] [PATCH 1/3] rockchip: make boot_mode releated codes reused across all platforms   Simon Glass
    • [U-Boot] [PATCH 1/3] rockchip: make boot_mode releated codes reused across all platforms   Heiko Stuebner
      • [U-Boot] [PATCH 1/3] rockchip: make boot_mode releated codes reused across all platforms   Andy Yan
  • [U-Boot] [PATCH 2/3] rockchip: add support for backing to bootrom download mode   Andy Yan
    • [U-Boot] [PATCH 2/3] rockchip: add support for backing to bootrom download mode   Simon Glass
  • [U-Boot] [PATCH 3/3] rockchip: check download key before bootup   Andy Yan
    • [U-Boot] [PATCH 3/3] rockchip: check download key before bootup   Simon Glass
      • [U-Boot] [PATCH 3/3] rockchip: check download key before bootup   Andy Yan
      • [U-Boot] [PATCH 3/3] rockchip: check download key before bootup   Simon Glass
• [U-Boot] [PATCH v5 00/10] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 01/10] dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 02/10] fit: use 'const' for the input of fdt_offset() and locate_dtb_in_fit()   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 03/10] fit: fixed bug in locate_dtb_in_fit()   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 04/10] fit: If no matching config is found in fit_find_config_node(), use the default one   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 05/10] lzo: add a function to check the validity of the header   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 06/10] gzip: add a function to parse the header   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 07/10] lib: allow building lzo and gunzip for the SPL   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 08/10] fdtdec: sort include files   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v5 08/10] fdtdec: sort include files   Simon Glass
  • [U-Boot] [PATCH v5 09/10] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 10/10] omap: detect board before spl_early_init()   Jean-Jacques Hiblot
• [U-Boot] [RESEND PATCH 0/2] rockchip: rk3399-puma: migrate from 'rockchip, vbus-gpio' to a fixed regulator   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1   Philipp Tomsich
    • [U-Boot] [RESEND PATCH 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1   Simon Glass
    • [U-Boot] [U-Boot, RESEND, 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1   Philipp Tomsich
• [U-Boot] [RESEND PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator   Simon Glass
    • [U-Boot] [RESEND PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator   Dr. Philipp Tomsich
  • [U-Boot] [U-Boot, RESEND, 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator   Philipp Tomsich
• [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 2/6] rockchip: xhci: Convert to livetree   Philipp Tomsich
    • [U-Boot] [RESEND PATCH 2/6] rockchip: xhci: Convert to livetree   Simon Glass
  • [U-Boot] [RESEND PATCH 5/6] usb: host: ehci-generic: convert to livetree   Philipp Tomsich
    • [U-Boot] [RESEND PATCH 5/6] usb: host: ehci-generic: convert to livetree   Simon Glass
  • [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7   Marek Vasut
    • [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7   Dr. Philipp Tomsich
      • [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7   Dr. Philipp Tomsich
      • [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7   Marek Vasut
      • [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7   Marek Vasut
      • [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7   Dr. Philipp Tomsich
      • [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7   Marek Vasut
• [U-Boot] [RESEND PATCH 1/6] rockchip: clk: rk3399: Convert to livetree   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 1/6] rockchip: clk: rk3399: Convert to livetree   Simon Glass
  • [U-Boot] [U-Boot, RESEND, 1/6] rockchip: clk: rk3399: Convert to livetree   Philipp Tomsich
• [U-Boot] [RESEND PATCH 3/6] rockchip: efuse: change to use dev_read_addr_ptr   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 3/6] rockchip: efuse: change to use dev_read_addr_ptr   Simon Glass
  • [U-Boot] [U-Boot, RESEND, 3/6] rockchip: efuse: change to use dev_read_addr_ptr   Philipp Tomsich
• [U-Boot] [RESEND PATCH 4/6] usb: dwc2: convert to livetree   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 4/6] usb: dwc2: convert to livetree   Simon Glass
• [U-Boot] [RESEND PATCH 6/6] rockchip: defconfig: puma-rk3399: enable OF_LIVE (live tree)   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 6/6] rockchip: defconfig: puma-rk3399: enable OF_LIVE (live tree)   Simon Glass
  • [U-Boot] [U-Boot, RESEND, 6/6] rockchip: defconfig: puma-rk3399: enable OF_LIVE (live tree)   Philipp Tomsich
• [U-Boot] [RESEND PATCH 00/10] rockchip: puma-rk3399: support 'same-as-spl' for boot-order and always power-up eMMC/SPI   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 07/10] rockchip: puma-rk3399: update board_init()   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig   Philipp Tomsich
  • [U-Boot] [RESEND PATCH 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL   Philipp Tomsich
• [U-Boot] [RESEND PATCH 01/10] rockchip: rk3399: make spl_board_init board-specific   Philipp Tomsich
• [U-Boot] [RESEND PATCH 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source   Philipp Tomsich
• [U-Boot] [RESEND PATCH 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()   Philipp Tomsich
• [U-Boot] [RESEND PATCH 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order   Philipp Tomsich
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
  • [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
  • [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
    • [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH] Travis-CI: Update PATH   Tom Rini
  • [U-Boot] [PATCH] Travis-CI: Update PATH   Tom Rini
• [U-Boot] [U-Boot,v2,1/3] rockchip: rk3399: detect boot mode   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 3/4] rockchip: add BOOT_LOADER support for boot mode   Philipp Tomsich
• [U-Boot] [PATCH] efi_loader: fix events   Rob Clark
  • [U-Boot] efi_loader: fix events   Heinrich Schuchardt
    • [U-Boot] efi_loader: fix events   Rob Clark
• [U-Boot] [PATCH V3 1/5] mmc: uniphier-sd: Factor out register IO   Marek Vasut
  • [U-Boot] [PATCH V3 1/5] mmc: uniphier-sd: Factor out register IO   Marek Vasut
  • [U-Boot] [PATCH V3 1/5] mmc: uniphier-sd: Factor out register IO   Jaehoon Chung
    • [U-Boot] [PATCH V3 1/5] mmc: uniphier-sd: Factor out register IO   Masahiro Yamada
• [U-Boot] [PATCH 1/6] ARM: rmobile: dts: Add EHCI USB nodes to r8a7796   Marek Vasut
  • [U-Boot] [PATCH 3/6] ARM: rmobile: Move HSUSB configuration to board on ULCB   Marek Vasut
    • [U-Boot] [PATCH 3/6] ARM: rmobile: Move HSUSB configuration to board on ULCB   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 4/6] ARM: rmobile: Enable EHCI generic on Salvator-X   Marek Vasut
    • [U-Boot] [PATCH 4/6] ARM: rmobile: Enable EHCI generic on Salvator-X   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 5/6] ARM: rmobile: Enable EHCI generic on ULCB   Marek Vasut
    • [U-Boot] [PATCH 5/6] ARM: rmobile: Enable EHCI generic on ULCB   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 6/6] usb: Drop the EHCI RCar Gen3   Marek Vasut
    • [U-Boot] [PATCH 6/6] usb: Drop the EHCI RCar Gen3   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 1/6] ARM: rmobile: dts: Add EHCI USB nodes to r8a7796   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 1/6] ARM: rmobile: dts: Add EHCI USB nodes to r8a7796   Marek Vasut
    • [U-Boot] [PATCH 2/6] ARM: rmobile: Move HSUSB configuration to board on Salvator-X   Marek Vasut
    • [U-Boot] [PATCH 3/6] ARM: rmobile: Move HSUSB configuration to board on ULCB   Marek Vasut
    • [U-Boot] [PATCH 4/6] ARM: rmobile: Enable EHCI generic on Salvator-X   Marek Vasut
    • [U-Boot] [PATCH 5/6] ARM: rmobile: Enable EHCI generic on ULCB   Marek Vasut
    • [U-Boot] [PATCH 6/6] usb: Drop the EHCI RCar Gen3   Marek Vasut
• [U-Boot] [PATCH 2/6] ARM: rmobile: Move HSUSB configuration to board on Salvator-X   Marek Vasut
  • [U-Boot] [PATCH 2/6] ARM: rmobile: Move HSUSB configuration to board on Salvator-X   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configs   Marek Vasut
  • [U-Boot] [PATCH] ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configs   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH] ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configs   Marek Vasut
• [U-Boot] [PATCH] mtd: cfi: Zap cfi_flash_base in DM case   Marek Vasut
  • [U-Boot] [PATCH] mtd: cfi: Zap cfi_flash_base in DM case   Stefan Roese
• [U-Boot] [PATCH] mtd: cfi: Add support for status register polling   Marek Vasut
  • [U-Boot] [PATCH] mtd: cfi: Add support for status register polling   Stefan Roese
• [U-Boot] [PATCH] dm: gpio: Add DM compatibilty to GPIO driver for Davinci   Adam Ford
• [U-Boot] DA850EVM Maintainers (abandoned?)   Adam Ford
  • [U-Boot] DA850EVM Maintainers (abandoned?)   Tom Rini
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   Joakim Tjernlund
  • [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   York Sun
    • [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   Mingkai Hu
• [U-Boot] Compiling Mainline Kernel v4.4.70 Stable to ChormeBook Nvidia Tegra TK1 (Ubuntu-Xenial) -Uboot Not Booting (BlackScreen)   Alexandre N. Perfeito
  • [U-Boot] Compiling Mainline Kernel v4.4.70 Stable to ChormeBook Nvidia Tegra TK1 (Ubuntu-Xenial) -Uboot Not Booting (BlackScreen)   Simon Glass
• [U-Boot] [PATCH] ARM: zynq: Add support for SYZYGY Hub board   Tom McLeod
  • [U-Boot] [PATCH] ARM: zynq: Add support for SYZYGY Hub board   Tom McLeod
  • [U-Boot] [PATCH] ARM: zynq: Add support for SYZYGY Hub board   Michal Simek
    • [U-Boot] [PATCH] ARM: zynq: Add support for SYZYGY Hub board   Tom McLeod
  • [U-Boot] [PATCH v2] ARM: zynq: Add support for SYZYGY Hub board   Tom McLeod
• [U-Boot] [PATCH v2 00/14] sunxi: convert musb to the device model and enable usb_ether   Maxime Ripard
  • [U-Boot] [PATCH v2 01/14] usb: gadget: Move USBNET_DEVADDR option out of g_dnl   Maxime Ripard
    • [U-Boot] [PATCH v2 01/14] usb: gadget: Move USBNET_DEVADDR option out of g_dnl   Łukasz Majewski
  • [U-Boot] [PATCH v2 02/14] usb: gadget: Document USBNET_DEVADDR   Maxime Ripard
    • [U-Boot] [PATCH v2 02/14] usb: gadget: Document USBNET_DEVADDR   Simon Glass
    • [U-Boot] [PATCH v2 02/14] usb: gadget: Document USBNET_DEVADDR   Łukasz Majewski
  • [U-Boot] [PATCH v2 03/14] usb: gadget: Move USBNET_HOST_ADDR to Kconfig   Maxime Ripard
    • [U-Boot] [PATCH v2 03/14] usb: gadget: Move USBNET_HOST_ADDR to Kconfig   Simon Glass
    • [U-Boot] [PATCH v2 03/14] usb: gadget: Move USBNET_HOST_ADDR to Kconfig   Łukasz Majewski
  • [U-Boot] [PATCH v2 04/14] usb: gadget: Convert USB_ETHER to Kconfig   Maxime Ripard
    • [U-Boot] [PATCH v2 04/14] usb: gadget: Convert USB_ETHER to Kconfig   Simon Glass
    • [U-Boot] [PATCH v2 04/14] usb: gadget: Convert USB_ETHER to Kconfig   Łukasz Majewski
  • [U-Boot] [PATCH v2 05/14] usb: gadget: usb_ether: Move the interfaces to Kconfig   Maxime Ripard
    • [U-Boot] [PATCH v2 05/14] usb: gadget: usb_ether: Move the interfaces to Kconfig   Simon Glass
    • [U-Boot] [PATCH v2 05/14] usb: gadget: usb_ether: Move the interfaces to Kconfig   Łukasz Majewski
  • [U-Boot] [PATCH v2 06/14] usb: gadget: Make g_dnl USB settings common   Maxime Ripard
  • [U-Boot] [PATCH v2 07/14] usb: gadget: usb_ether: Move settings to common   Maxime Ripard
  • [U-Boot] [PATCH v2 08/14] sunxi: provide default USB gadget setup   Maxime Ripard
    • [U-Boot] [PATCH v2 08/14] sunxi: provide default USB gadget setup   Łukasz Majewski
  • [U-Boot] [PATCH v2 09/14] sunxi: imply USB_GADGET   Maxime Ripard
    • [U-Boot] [PATCH v2 09/14] sunxi: imply USB_GADGET   Łukasz Majewski
    • [U-Boot] [PATCH v2 09/14] sunxi: imply USB_GADGET   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 09/14] sunxi: imply USB_GADGET   Maxime Ripard
  • [U-Boot] [PATCH v2 10/14] cmd: fastboot: Rework fastboot dependency   Maxime Ripard
    • [U-Boot] [PATCH v2 10/14] cmd: fastboot: Rework fastboot dependency   Łukasz Majewski
  • [U-Boot] [PATCH v2 11/14] musb: sunxi: switch to the device model   Maxime Ripard
    • [U-Boot] [PATCH v2 11/14] musb: sunxi: switch to the device model   Łukasz Majewski
  • [U-Boot] [PATCH v2 12/14] sunxi: Register usb_ether   Maxime Ripard
    • [U-Boot] [PATCH v2 12/14] sunxi: Register usb_ether   Łukasz Majewski
  • [U-Boot] [PATCH v2 13/14] sunxi: Imply USB_ETHER   Maxime Ripard
    • [U-Boot] [PATCH v2 13/14] sunxi: Imply USB_ETHER   Łukasz Majewski
  • [U-Boot] [PATCH v2 14/14] sunxi: sina33: Sync the device tree with the kernel   Maxime Ripard
    • [U-Boot] [PATCH v2 14/14] sunxi: sina33: Sync the device tree with the kernel   Łukasz Majewski
  • [U-Boot] [PATCH v2 00/14] sunxi: convert musb to the device model and enable usb_ether   Łukasz Majewski
    • [U-Boot] [PATCH v2 00/14] sunxi: convert musb to the device model and enable usb_ether   Maxime Ripard
• [U-Boot] [U-Boot, v2, 2/3] rockchip: firefly-rk3399: add FIT for rk3399   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/3] rockchip: rk3399-evb: add script for atf fit   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 3/3] rockchip: evb-rk3399: update document for board bring up   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/4] rockchip: rk3229: move usb gadget into defconfig   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 2/4] rockchip: rk322x: update the sysreg number for boot mode   Philipp Tomsich
  • [U-Boot] [U-Boot, v2, 2/4] rockchip: rk322x: update the sysreg number for boot mode   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 4/4] rockchip: enable rockusb for all rockchip SoCs   Philipp Tomsich
• [U-Boot] [PATCH v2 0/3] mmc: sunxi: index hack removal   Maxime Ripard
  • [U-Boot] [PATCH v2 1/3] arm: sunxi: Move spl_boot_device in a separate function   Maxime Ripard
  • [U-Boot] [PATCH v2 2/3] sunxi: Use sunxi_get_boot_device   Maxime Ripard
  • [U-Boot] [PATCH v2 3/3] sunxi: Remove the MMC index hack   Maxime Ripard
  • [U-Boot] [PATCH v2 0/3] mmc: sunxi: index hack removal   Maxime Ripard
• [U-Boot] [PATCH] Convert CONFIG_EMIF4 et al to Kconfig   Adam Ford
  • [U-Boot] [PATCH] Convert CONFIG_EMIF4 et al to Kconfig   Simon Glass
  • [U-Boot] [PATCH] Convert CONFIG_EMIF4 et al to Kconfig   Stefano Babic
  • [U-Boot] Convert CONFIG_EMIF4 et al to Kconfig   Tom Rini
• [U-Boot] [PATCH] fs/fat: fix fatbuf leak   Rob Clark
  • [U-Boot] [PATCH] fs/fat: fix fatbuf leak   Simon Glass
  • [U-Boot] [PATCH] fs/fat: fix fatbuf leak   Łukasz Majewski
  • [U-Boot] [PATCH] fs/fat: fix fatbuf leak   Tom Rini
  • [U-Boot] fs/fat: fix fatbuf leak   Tom Rini
• [U-Boot] [PATCH] ARM: davinci: Update da8xxevm Maintainers   Adam Ford
  • [U-Boot] [PATCH] ARM: davinci: Update da8xxevm Maintainers   Tom Rini
    • [U-Boot] [PATCH] ARM: davinci: Update da8xxevm Maintainers   Adam Ford
      • [U-Boot] [PATCH] ARM: davinci: Update da8xxevm Maintainers   Tom Rini
  • [U-Boot] ARM: davinci: Update da8xxevm Maintainers   Tom Rini
• [U-Boot] [PATCH] ARM: dts: rmobile: Update DTS to match Linux 4.13   Marek Vasut
  • [U-Boot] [PATCH] ARM: dts: rmobile: Update DTS to match Linux 4.13   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] usb: xhci: Set number of event segments and entries to 1   Marek Vasut
  • [U-Boot] [PATCH] usb: xhci: Set number of event segments and entries to 1   Bin Meng
• [U-Boot] [PATCH] ARM: rmobile: dts: Add XHCI USB node to r8a7796   Marek Vasut
  • [U-Boot] [PATCH] ARM: rmobile: dts: Add XHCI USB node to r8a7796   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 00/22] mmc: Add support for HS200 and UHS modes   Marek Vasut
  • [U-Boot] [PATCH 00/22] mmc: Add support for HS200 and UHS modes   Jean-Jacques Hiblot
    • [U-Boot] [PATCH 00/22] mmc: Add support for HS200 and UHS modes   Marek Vasut
• [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Stefan Agner
  • [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably   Stefan Agner
  • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Eric Nelson
    • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Stefano Babic
      • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Stefan Agner
      • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Fabio Estevam
      • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Eric Nelson
  • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Stefan Agner
    • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Stefan Agner
    • [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably   Stefan Agner
      • [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably   Eric Nelson
      • [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably   Stefano Babic
      • [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably   Stefan Agner
      • [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably   Stefano Babic
    • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Eric Nelson
      • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Stefan Agner
    • [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active   Stefano Babic
• [U-Boot] [PATCH v2 3/3] rockchip: evb-rk3399: update document for board bring up   Kever Yang
• [U-Boot] [PATCH] rockchip: enable TPL_SYSRESET for all rockchip SoCs   Kever Yang
  • [U-Boot] [PATCH] rockchip: enable TPL_SYSRESET for all rockchip SoCs   Simon Glass
  • [U-Boot] rockchip: enable TPL_SYSRESET for all rockchip SoCs   Philipp Tomsich
  • [U-Boot] rockchip: enable TPL_SYSRESET for all rockchip SoCs   Philipp Tomsich
• [U-Boot] Uboot send pull request   uboot at andestech.com
  • [U-Boot] Uboot send pull request   Tom Rini
  • [U-Boot] Uboot send pull request   uboot at andestech.com
    • [U-Boot] Uboot send pull request   Tom Rini
  • [U-Boot] Uboot send pull request   uboot at andestech.com
    • [U-Boot] Uboot send pull request   Tom Rini
• [U-Boot] patman complains "ConfigParser.NoSectionError: No section: 'bounces'"   Bin Meng
  • [U-Boot] patman complains "ConfigParser.NoSectionError: No section: 'bounces'"   Simon Glass
• [U-Boot] [PATCH 1/3] nds32: ftmac100: support cache enable.   Andes
• [U-Boot] [PATCH 2/3] nds32: ftmac100 support cache enable.   Andes
• [U-Boot] [PATCH 3/3] nds32: ftmac100: Fix write mac addr fail problem.   Andes
• [U-Boot] [PATCH v2] blk: Remove various places that do flush cache after read   Bin Meng
  • [U-Boot] [PATCH v2] blk: Remove various places that do flush cache after read   Bin Meng
  • [U-Boot] [U-Boot, v2] blk: Remove various places that do flush cache after read   Tom Rini
• [U-Boot] [PATCH v2] cmd: blk: Use LBAFU in the common block command   Bin Meng
  • [U-Boot] [PATCH v2] cmd: blk: Use LBAFU in the common block command   Bin Meng
  • [U-Boot] [U-Boot, v2] cmd: blk: Use LBAFU in the common block command   Tom Rini
• [U-Boot] [PATCH v5 0/9] board: atmel: Add new board SAMA5D27-SOM1-EK board.   Wenyou Yang
  • [U-Boot] [PATCH v5 1/9] lib: at91: Add logo files used via API of DM_VIDEO   Wenyou Yang
    • [U-Boot] [PATCH v5 1/9] lib: at91: Add logo files used via API of DM_VIDEO   Simon Glass
  • [U-Boot] [PATCH v5 2/9] atmel: common: Add function to display via DM_VIDEO's API   Wenyou Yang
    • [U-Boot] [PATCH v5 2/9] atmel: common: Add function to display via DM_VIDEO's API   Simon Glass
  • [U-Boot] [PATCH v5 3/9] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2   Wenyou Yang
  • [U-Boot] [PATCH v5 4/9] ARM: at91: spl: Add mck function to lower rate while switching   Wenyou Yang
    • [U-Boot] [PATCH v5 4/9] ARM: at91: spl: Add mck function to lower rate while switching   Simon Glass
  • [U-Boot] [PATCH v5 5/9] board: sama5d2_xplained: Make SPL work on spiflash   Wenyou Yang
    • [U-Boot] [PATCH v5 5/9] board: sama5d2_xplained: Make SPL work on spiflash   Simon Glass
  • [U-Boot] [PATCH v5 6/9] ARM: at91: spl: Add boot device for boot from QSPI   Wenyou Yang
  • [U-Boot] [PATCH v5 7/9] ARM: at91: mach: Add missing defines of MPDDRC   Wenyou Yang
  • [U-Boot] [PATCH v5 8/9] ARM: at91: Get the Chip ID of SAMA5D2 SiP   Wenyou Yang
  • [U-Boot] [PATCH v5 9/9] board: atmel: Add SAMA5D27 SOM1 EK board   Wenyou Yang
    • [U-Boot] [PATCH v5 9/9] board: atmel: Add SAMA5D27 SOM1 EK board   Simon Glass
• [U-Boot] [PATCH v5 1/3] armv8:fsl-layerscape: Consolidate registers space defination for CCI-400 bus   York Sun
• [U-Boot] [PATCH v3 0/3] Allwinner DE2 HDMI SimpleFB support   Icenowy Zheng
  • [U-Boot] [PATCH v3 1/3] video: sunxi: extract simplefb match code to a new file   Icenowy Zheng
    • [U-Boot] [PATCH v3 1/3] video: sunxi: extract simplefb match code to a new file   Maxime Ripard
    • [U-Boot] [linux-sunxi] [PATCH v3 1/3] video: sunxi: extract simplefb match code to a new file   Siarhei Siamashka
  • [U-Boot] [PATCH v3 2/3] video: add an option for video simplefb via DT   Icenowy Zheng
    • [U-Boot] [PATCH v3 2/3] video: add an option for video simplefb via DT   Maxime Ripard
      • [U-Boot] [linux-sunxi] Re: [PATCH v3 2/3] video: add an option for video simplefb via DT   icenowy at aosc.io
      • [U-Boot] [linux-sunxi] Re: [PATCH v3 2/3] video: add an option for video simplefb via DT   Maxime Ripard
      • [U-Boot] [linux-sunxi] Re: [PATCH v3 2/3] video: add an option for video simplefb via DT   Vincent Legoll
      • [U-Boot] [linux-sunxi] Re: [PATCH v3 2/3] video: add an option for video simplefb via DT   Andre Przywara
  • [U-Boot] [PATCH v3 3/3] sunxi: setup simplefb for Allwinner DE2   Icenowy Zheng
    • [U-Boot] [PATCH v3 3/3] sunxi: setup simplefb for Allwinner DE2   Maxime Ripard
• [U-Boot] [Patch v2] QE: Set QE_IRAM_READY after uploading firmware   York Sun
• [U-Boot] [PATCH v3 1/3] SECURE_BOOT: Unify memory map for Layerscape based platforms   York Sun
• [U-Boot] [PATCH v3 2/3] LS2080ARDB: QSPI boot: Secure Boot image validation   York Sun
• [U-Boot] [PATCH v3 3/3] LS2080ARDB: Secure Boot defconfig for QSPI boot.   York Sun
• [U-Boot] [PATCH v3 1/5] tools: pblimage: Fix address calculation   York Sun
• [U-Boot] [PATCH v3 2/5] cmd: spl: Fix compiling warning   York Sun
• [U-Boot] [PATCH v3 3/5] spl: fit: Eanble GZIP support for image decompression   York Sun
• [U-Boot] [PATCH v3 4/5] spl: fit: Support both external and embedded data   York Sun
• [U-Boot] [PATCH v3 5/5] spl: fit: Add booting OS first   York Sun
• [U-Boot] [PATCH] armv8: fsl-lsch3: Make CCN-504 related code conditional   York Sun
• [U-Boot] [PATCH][v2]drivers:net:fsl-mc: Update MC address calculation   York Sun
• [U-Boot] [PATCH] armv8: fsl: Use correct conditional compile for ls1012a   York Sun
• [U-Boot] [PATCH] armv8: fsl-layerscape: Fix final MMU table for QSPI and IFC   York Sun
• [U-Boot] [PATCH v5 1/3] armv8: ls1088a: Add NXP LS1088A SoC support   York Sun
• [U-Boot] [PATCH v5 3/3] armv8: ls1088aqds: Add support of LS1088AQDS   York Sun
• [U-Boot] [U-Boot,1/3] image: Add TI PMMC image type   Tom Rini
• [U-Boot] [U-Boot, 2/3] ARM: k2g: Add FIT image handler for PMMC firmware   Tom Rini
• [U-Boot] [U-Boot, 3/3] configs: k2g_evm: Remove PMMC loading environment commands   Tom Rini
• [U-Boot] [U-Boot, 1/2] misc: i2c_eeprom: Add compatible for 24AA02E48   Tom Rini
• [U-Boot] [U-Boot, 2/2] misc: i2c_eeprom: Add compatible for AT24MAC402   Tom Rini
• [U-Boot] cosmetic: bootcount: correct comment for used scratch register   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] armv8: mmu: remove unused macro definition   Tom Rini
• [U-Boot] [U-Boot,v2,2/2] armv8: mmu: add space around operator   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM: OMAP3: am3517_evm: Move header to ti_omap3_common.h   Tom Rini
• [U-Boot] [U-Boot, 2/2] omap3: am3517_evm: Enable TI_COMMON_CMD_OPTION   Tom Rini
• [U-Boot] dma: import linux/dma-direction.h to consolidate enum dma_data_direction   Tom Rini
• [U-Boot] linux/io.h: import generic ioread* / iowrite* accessors from Linux   Tom Rini
• [U-Boot] davinci: da850-evm: switch to using TI_COMMON_CMD_OPTIONS   Tom Rini
• [U-Boot] ARM: DRA72x: Add support for detection of DRA71x SR 2.1   Tom Rini
• [U-Boot] [PATCH] patman: Fix error when the email blacklist is missing   Simon Glass
  • [U-Boot] [PATCH] patman: Fix error when the email blacklist is missing   Chris Packham
    • [U-Boot] [PATCH] patman: Fix error when the email blacklist is missing   Bin Meng
      • [U-Boot] [PATCH] patman: Fix error when the email blacklist is missing   Simon Glass
• [U-Boot] [PATCH v3 1/2] armv8: fsl-layerscape: Support to add RGMII for ls1088aqds   York Sun
• [U-Boot] [PATCH v3 2/2] armv8: ls1088aqds: Add support of EC1 and EC2   York Sun
• [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Bin Meng
  • [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig   Ran Wang
• [U-Boot] ARM i.MX6(A7/A9) embedded core board(CPU module) and custom solution   dairy at myzr.com.cn
• [U-Boot] [PATCH V2] dm: gpio: Add DM compatibilty to GPIO driver for Davinci   Adam Ford
  • [U-Boot] [PATCH V2] dm: gpio: Add DM compatibilty to GPIO driver for Davinci   Simon Glass
    • [U-Boot] [PATCH V2] dm: gpio: Add DM compatibilty to GPIO driver for Davinci   Adam Ford
      • [U-Boot] [PATCH V2] dm: gpio: Add DM compatibilty to GPIO driver for Davinci   Simon Glass
• [U-Boot] [PATCH] armv8: ls1043a: disable IFC in SPL only when QSPI is used   Yangbo Lu
  • [U-Boot] [PATCH] armv8: ls1043a: disable IFC in SPL only when QSPI is used   York Sun
    • [U-Boot] [PATCH] armv8: ls1043a: disable IFC in SPL only when QSPI is used   Y.b. Lu
• [U-Boot] [PATCH v6 0/9] board: atmel: Add new board SAMA5D27-SOM1-EK board.   Wenyou Yang
  • [U-Boot] [PATCH v6 1/9] lib: at91: Add logo files used via API of DM_VIDEO   Wenyou Yang
    • [U-Boot] [U-Boot, v6, 1/9] lib: at91: Add logo files used via API of DM_VIDEO   Tom Rini
  • [U-Boot] [PATCH v6 2/9] atmel: common: Add function to display via DM_VIDEO's API   Wenyou Yang
    • [U-Boot] [U-Boot, v6, 2/9] atmel: common: Add function to display via DM_VIDEO's API   Tom Rini
  • [U-Boot] [PATCH v6 3/9] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2   Wenyou Yang
    • [U-Boot] [U-Boot, v6, 3/9] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2   Tom Rini
  • [U-Boot] [PATCH v6 4/9] ARM: at91: spl: Add mck function to lower rate while switching   Wenyou Yang
    • [U-Boot] [U-Boot, v6, 4/9] ARM: at91: spl: Add mck function to lower rate while switching   Tom Rini
  • [U-Boot] [PATCH v6 5/9] board: sama5d2_xplained: Make SPL work on spiflash   Wenyou Yang
    • [U-Boot] [U-Boot, v6, 5/9] board: sama5d2_xplained: Make SPL work on spiflash   Tom Rini
  • [U-Boot] [PATCH v6 6/9] ARM: at91: spl: Add boot device for boot from QSPI   Wenyou Yang
    • [U-Boot] [U-Boot, v6, 6/9] ARM: at91: spl: Add boot device for boot from QSPI   Tom Rini
  • [U-Boot] [PATCH v6 7/9] ARM: at91: mach: Add missing defines of MPDDRC   Wenyou Yang
    • [U-Boot] [U-Boot, v6, 7/9] ARM: at91: mach: Add missing defines of MPDDRC   Tom Rini
  • [U-Boot] [PATCH v6 8/9] ARM: at91: Get the Chip ID of SAMA5D2 SiP   Wenyou Yang
    • [U-Boot] [U-Boot, v6, 8/9] ARM: at91: Get the Chip ID of SAMA5D2 SiP   Tom Rini
  • [U-Boot] [PATCH v6 9/9] board: atmel: Add SAMA5D27 SOM1 EK board   Wenyou Yang
    • [U-Boot] [U-Boot, v6, 9/9] board: atmel: Add SAMA5D27 SOM1 EK board   Tom Rini
• [U-Boot] [PATCH 1/2] ls1088ardb: Enable USB command RDB qspi-boot   Ashish Kumar
  • [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot   Ashish Kumar
    • [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot   Bin Meng
      • [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot   Ashish Kumar
      • [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot   Ran Wang
  • [U-Boot] [PATCH 1/2] ls1088ardb: Enable USB command RDB qspi-boot   Bin Meng
• [U-Boot] [PATCH 1/2] ls1088ardb: Add SCSI related configs in header file for RDB   Ashish Kumar
  • [U-Boot] [PATCH 2/2] ls1088aqds: Add SCSI related configs in header file for qds   Ashish Kumar
• [U-Boot] [PATCH] sf: Fix s25fs512s erase size and remove SECT_4K flag   Suresh Gupta
• [U-Boot] [PATCH] spi: fsl_qspi: Copy 16 byte aligned data in TX FIFO   Suresh Gupta
  • [U-Boot] [PATCH] spi: fsl_qspi: Copy 16 byte aligned data in TX FIFO   Jagan Teki
• [U-Boot] [PATCH] rockchip: rock-rk3188: do not use ARCH_MEMSET in TPL   Kever Yang
  • [U-Boot] [PATCH] rockchip: rock-rk3188: do not use ARCH_MEMSET in TPL   Simon Glass
• [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard   Bin Meng
  • [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard   Bin Meng
    • [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard   Marek Vasut
      • [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard   Tom Rini
      • [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard   Marek Vasut
  • [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard   Marek Vasut
• [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Lukasz Majewski
  • [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Fabio Estevam
    • [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Łukasz Majewski
    • [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Łukasz Majewski
  • [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Jagan Teki
    • [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Łukasz Majewski
• [U-Boot] [PATCH 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC   Kever Yang
  • [U-Boot] [PATCH 2/5] power: pmic: rk816: support rk816 pmic   Kever Yang
    • [U-Boot] [U-Boot,2/5] power: pmic: rk816: support rk816 pmic   Philipp Tomsich
    • [U-Boot] [U-Boot,2/5] power: pmic: rk816: support rk816 pmic   Philipp Tomsich
      • [U-Boot] [U-Boot,2/5] power: pmic: rk816: support rk816 pmic   Simon Glass
      • [U-Boot] [U-Boot,2/5] power: pmic: rk816: support rk816 pmic   Kever Yang
  • [U-Boot] [PATCH 3/5] power: pmic: rk805: support rk805 pmic   Kever Yang
    • [U-Boot] [U-Boot,3/5] power: pmic: rk805: support rk805 pmic   Philipp Tomsich
    • [U-Boot] [U-Boot,3/5] power: pmic: rk805: support rk805 pmic   Philipp Tomsich
    • [U-Boot] [U-Boot,3/5] power: pmic: rk805: support rk805 pmic   Philipp Tomsich
  • [U-Boot] [PATCH 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver   Kever Yang
    • [U-Boot] [U-Boot, 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver   Philipp Tomsich
    • [U-Boot] [U-Boot, 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver   Philipp Tomsich
  • [U-Boot] [PATCH 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes   Kever Yang
    • [U-Boot] [U-Boot, 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes   Philipp Tomsich
    • [U-Boot] [U-Boot, 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC   Philipp Tomsich
• [U-Boot] [PATCH 0/8] Add rockchip Saradc support   David Wu
  • [U-Boot] [PATCH 1/8] adc: Add driver for Rockchip Saradc   David Wu
    • [U-Boot] [U-Boot,1/8] adc: Add driver for Rockchip Saradc   Philipp Tomsich
      • [U-Boot] [U-Boot,1/8] adc: Add driver for Rockchip Saradc   David.Wu
    • [U-Boot] [U-Boot,1/8] adc: Add driver for Rockchip Saradc   Philipp Tomsich
  • [U-Boot] [PATCH 2/8] configs: rockchip: Enable the ROCKCHIP_SARADC config   David Wu
    • [U-Boot] [PATCH 2/8] configs: rockchip: Enable the ROCKCHIP_SARADC config   Dr. Philipp Tomsich
    • [U-Boot] [PATCH 2/8] configs: rockchip: Enable the ROCKCHIP_SARADC config   David.Wu
  • [U-Boot] [PATCH 3/8] clk: rockchip: Add rv1108 Saradc clock support   David Wu
    • [U-Boot] [U-Boot, 3/8] clk: rockchip: Add rv1108 Saradc clock support   Philipp Tomsich
    • [U-Boot] [U-Boot, 3/8] clk: rockchip: Add rv1108 Saradc clock support   Philipp Tomsich
  • [U-Boot] [PATCH 4/8] clk: rockchip: Add Saradc clock support for rk3288   David Wu
    • [U-Boot] [PATCH 4/8] clk: rockchip: Add Saradc clock support for rk3288   Dr. Philipp Tomsich
    • [U-Boot] [PATCH 4/8] clk: rockchip: Add Saradc clock support for rk3288   Dr. Philipp Tomsich
    • [U-Boot] [PATCH 4/8] clk: rockchip: Add Saradc clock support for rk3288   David.Wu
    • [U-Boot] [U-Boot, 4/8] clk: rockchip: Add Saradc clock support for rk3288   Philipp Tomsich
  • [U-Boot] [PATCH 5/8] clk: rockchip: Add rk3328 Saradc clock support   David Wu
    • [U-Boot] [U-Boot, 5/8] clk: rockchip: Add rk3328 Saradc clock support   Philipp Tomsich
    • [U-Boot] [U-Boot, 5/8] clk: rockchip: Add rk3328 Saradc clock support   Philipp Tomsich
  • [U-Boot] [PATCH 6/8] clk: rockchip: Add rk3368 Saradc clock support   David Wu
    • [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support   Philipp Tomsich
      • [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support   David.Wu
      • [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support   Dr. Philipp Tomsich
    • [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support   Philipp Tomsich
      • [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support   Dr. Philipp Tomsich
  • [U-Boot] [PATCH 7/8] clk: rockchip: Add rk3399 Saradc clock support   David Wu
    • [U-Boot] [U-Boot, 7/8] clk: rockchip: Add rk3399 Saradc clock support   Philipp Tomsich
    • [U-Boot] [U-Boot, 7/8] clk: rockchip: Add rk3399 Saradc clock support   Philipp Tomsich
  • [U-Boot] [PATCH 8/8] arm: dts: rv1108: Add Saradc node at dtsi level   David Wu
    • [U-Boot] [U-Boot, 8/8] arm: dts: rv1108: Add Saradc node at dtsi level   Philipp Tomsich
    • [U-Boot] [U-Boot, 8/8] arm: dts: rv1108: Add Saradc node at dtsi level   Philipp Tomsich
• [U-Boot] [PATCH] linux/kernel.h: import DIV_ROUND_{DOWN, UP}_ULL from Linux   Masahiro Yamada
• [U-Boot] [PATCH] spl: stash bootstage info before jump to next stage   Kever Yang
  • [U-Boot] [PATCH] spl: stash bootstage info before jump to next stage   Tom Rini
    • [U-Boot] [PATCH] spl: stash bootstage info before jump to next stage   Simon Glass
  • [U-Boot] spl: stash bootstage info before jump to next stage   Tom Rini
• [U-Boot] [GIT] Pull request: u-boot-dfu   Łukasz Majewski
  • [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH 0/6] Sync and consolidate Linux-derived printk, BUILD_BUG, BUG, WARN, etc.   Masahiro Yamada
  • [U-Boot] [PATCH 2/6] treewide: replace with error() with pr_err()   Masahiro Yamada
    • [U-Boot] [PATCH 2/6] treewide: replace with error() with pr_err()   Simon Glass
  • [U-Boot] [PATCH 0/6] Sync and consolidate Linux-derived printk, BUILD_BUG, BUG, WARN, etc.   Masahiro Yamada
• [U-Boot] [PATCH 1/6] printk: collect printk stuff into <linux/printk.h>   Masahiro Yamada
• [U-Boot] [PATCH 3/6] common.h: remove error()   Masahiro Yamada
• [U-Boot] [PATCH 4/6] vsprintf.h: include <linux/types.h>   Masahiro Yamada
• [U-Boot] [PATCH 5/6] bug.h: sync BUILD_BUG stuff with Linux 4.13   Masahiro Yamada
• [U-Boot] [PATCH 6/6] bug.h: move runtime BUG/WARN macros into <linux/bug.h>   Masahiro Yamada
• [U-Boot] [U-Boot, 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig   Tom Rini
  • [U-Boot] [U-Boot, 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig   Yang, Wenyou
• [U-Boot] [PATCH v2 0/9] Add STM32H7 SoC, Discovery and Evaluation board support   patrice.chotard at st.com
  • [U-Boot] [PATCH v2 1/9] pinctrl: stm32: add stm32h743-pinctrl compatible   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 1/9] pinctrl: stm32: add stm32h743-pinctrl compatible   Simon Glass
    • [U-Boot] [PATCH v2 1/9] pinctrl: stm32: add stm32h743-pinctrl compatible   Vikas Manocha
    • [U-Boot] [U-Boot, v2, 1/9] pinctrl: stm32: add stm32h743-pinctrl compatible   Tom Rini
  • [U-Boot] [PATCH v2 2/9] serial: stm32x7: add STM32H7 support   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 2/9] serial: stm32x7: add STM32H7 support   Simon Glass
    • [U-Boot] [PATCH v2 2/9] serial: stm32x7: add STM32H7 support   Vikas Manocha
      • [U-Boot] [PATCH v2 2/9] serial: stm32x7: add STM32H7 support   Patrice CHOTARD
    • [U-Boot] [U-Boot,v2,2/9] serial: stm32x7: add STM32H7 support   Tom Rini
  • [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs   Simon Glass
    • [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs   Vikas Manocha
      • [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs   Patrice CHOTARD
      • [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs   Patrice CHOTARD
      • [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs   Patrice CHOTARD
      • [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs   Vikas MANOCHA
    • [U-Boot] [U-Boot, v2, 3/9] dm: clk: add clk driver support for stm32h7 SoCs   Tom Rini
  • [U-Boot] [PATCH v2 4/9] dm: reset: add stm32 reset driver   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 4/9] dm: reset: add stm32 reset driver   Simon Glass
    • [U-Boot] [U-Boot,v2,4/9] dm: reset: add stm32 reset driver   Tom Rini
  • [U-Boot] [PATCH v2 5/9] dm: misc: add stm32 rcc driver   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 5/9] dm: misc: add stm32 rcc driver   Simon Glass
    • [U-Boot] [U-Boot,v2,5/9] dm: misc: add stm32 rcc driver   Tom Rini
  • [U-Boot] [PATCH v2 6/9] ARM: DTS: stm32: add stm32h743i-disco files   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 6/9] ARM: DTS: stm32: add stm32h743i-disco files   Simon Glass
    • [U-Boot] [U-Boot, v2, 6/9] ARM: DTS: stm32: add stm32h743i-disco files   Tom Rini
  • [U-Boot] [PATCH v2 7/9] ARM: DTS: stm32: add stm32h743i-eval files   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 7/9] ARM: DTS: stm32: add stm32h743i-eval files   Simon Glass
    • [U-Boot] [U-Boot, v2, 7/9] ARM: DTS: stm32: add stm32h743i-eval files   Tom Rini
  • [U-Boot] [PATCH v2 8/9] ARM: DTS: stm32: adapt stm32h7 dts files for U-boot   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 8/9] ARM: DTS: stm32: adapt stm32h7 dts files for U-boot   Simon Glass
    • [U-Boot] [U-Boot, v2, 8/9] ARM: DTS: stm32: adapt stm32h7 dts files for U-boot   Tom Rini
  • [U-Boot] [PATCH v2 9/9] board: Add stm32h7 SoC, discovery and evaluation boards support   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 9/9] board: Add stm32h7 SoC, discovery and evaluation boards support   Simon Glass
    • [U-Boot] [U-Boot, v2, 9/9] board: Add stm32h7 SoC, discovery and evaluation boards support   Tom Rini
• [U-Boot] [PATCH] arm: mach-omap2: Relax checks on OP-TEE location to allow pageable image   Andrew F. Davis
  • [U-Boot] [PATCH] arm: mach-omap2: Relax checks on OP-TEE location to allow pageable image   Lokesh Vutla
  • [U-Boot] arm: mach-omap2: Relax checks on OP-TEE location to allow pageable image   Tom Rini
• [U-Boot] [PATCH 01/15] image: add IH_OS_ARM_TRUSTED_FIRMWARE for ARM Trusted Firmware   Philipp Tomsich
  • [U-Boot] [PATCH 01/15] image: add IH_OS_ARM_TRUSTED_FIRMWARE for ARM Trusted Firmware   Simon Glass
• [U-Boot] [PATCH 02/15] spl: add a fdt_addr field to spl_image_info   Philipp Tomsich
  • [U-Boot] [PATCH 02/15] spl: add a fdt_addr field to spl_image_info   Simon Glass
• [U-Boot] [PATCH 03/15] spl: change load_addr and entry_point to uintptr_t   Philipp Tomsich
  • [U-Boot] [PATCH 03/15] spl: change load_addr and entry_point to uintptr_t   Simon Glass
• [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots   Philipp Tomsich
  • [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots   York Sun
    • [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots   Dr. Philipp Tomsich
      • [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots   York Sun
      • [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots   Dr. Philipp Tomsich
      • [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots   York Sun
  • [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots   Simon Glass
• [U-Boot] [PATCH 05/15] spl: fit: implement fdt_record_loadable   Philipp Tomsich
  • [U-Boot] [PATCH 05/15] spl: fit: implement fdt_record_loadable   Simon Glass
• [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images   Philipp Tomsich
  • [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images   Simon Glass
• [U-Boot] [PATCH 07/15] spl: atf: introduce spl_invoke_atf and make bl31_entry private   Philipp Tomsich
  • [U-Boot] [PATCH 07/15] spl: atf: introduce spl_invoke_atf and make bl31_entry private   Simon Glass
• [U-Boot] [PATCH 08/15] spl: rename config item SPL_ATF_SUPPORT to SPL_ATF   Philipp Tomsich
  • [U-Boot] [PATCH 08/15] spl: rename config item SPL_ATF_SUPPORT to SPL_ATF   Simon Glass
• [U-Boot] [PATCH 09/15] spl: atf: drop the SPL_ATF_TEXT_BASE configuration item   Philipp Tomsich
  • [U-Boot] [PATCH 09/15] spl: atf: drop the SPL_ATF_TEXT_BASE configuration item   Simon Glass
• [U-Boot] [PATCH 10/15] rockchip: dts: rk3399-puma: add /config/arm-trusted-firmware, reset-gpio property   Philipp Tomsich
  • [U-Boot] [PATCH 10/15] rockchip: dts: rk3399-puma: add /config/arm-trusted-firmware, reset-gpio property   Simon Glass
• [U-Boot] [PATCH 11/15] rockchip: defconfig: firefly-rk3399: sync up with SPL changes for ATF   Philipp Tomsich
  • [U-Boot] [PATCH 11/15] rockchip: defconfig: firefly-rk3399: sync up with SPL changes for ATF   Simon Glass
• [U-Boot] [PATCH 12/15] rockchip: board: puma-rk3399: update .its file to use new features   Philipp Tomsich
  • [U-Boot] [PATCH 12/15] rockchip: board: puma-rk3399: update .its file to use new features   Simon Glass
• [U-Boot] [PATCH 13/15] rockchip: board: lion-rk3368: update .its file   Philipp Tomsich
  • [U-Boot] [PATCH 13/15] rockchip: board: lion-rk3368: update .its file   Simon Glass
• [U-Boot] [PATCH 14/15] rockchip: defconfig: puma-rk3399: sync up with SPL changes for ATF   Philipp Tomsich
  • [U-Boot] [PATCH 14/15] rockchip: defconfig: puma-rk3399: sync up with SPL changes for ATF   Simon Glass
• [U-Boot] [PATCH 15/15] rockchip: defconfig: lion-rk3368: sync up with SPL changes for ATF   Philipp Tomsich
  • [U-Boot] [PATCH 15/15] rockchip: defconfig: lion-rk3368: sync up with SPL changes for ATF   Simon Glass
• [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression   Heinrich Schuchardt
  • [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression   York Sun
    • [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression   Heinrich Schuchardt
      • [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression   York Sun
      • [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression   Tom Rini
      • [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression   Heinrich Schuchardt
• [U-Boot] [PATCH] nios2: 10m50: Add CPU pre-relocation in device tree   Marek Vasut
• [U-Boot] [v2 PATCH 0/4] Switch odroid to use distro_bootcmd.   Vagrant Cascadian
  • [U-Boot] [v2 PATCH 1/4] Fix default console on odroid to only specify the device, as "console=" is redundant with the boot environment.   Vagrant Cascadian
  • [U-Boot] [v2 PATCH 2/4] Increase the default environment size on odroid, as config_distro_bootcmd requires a more space for the environment.   Vagrant Cascadian
  • [U-Boot] [v2 PATCH 3/4] Switch odroid to use config_distro_bootcmd.   Vagrant Cascadian
  • [U-Boot] [v2 PATCH 4/4] Inherit default value for bootdelay from distro_bootcmd on odroid.   Vagrant Cascadian
• [U-Boot] [v2 PATCH] Inherit default value for bootdelay from distro_bootcmd on odroid-xu3.   Vagrant Cascadian
• [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot   Rob Clark
  • [U-Boot] [PATCH v3 01/21] part: move efi_guid_t   Rob Clark
    • [U-Boot] [U-Boot,v3,01/21] part: move efi_guid_t   Heinrich Schuchardt
      • [U-Boot] [U-Boot,v3,01/21] part: move efi_guid_t   Heinrich Schuchardt
    • [U-Boot] [U-Boot,v3,01/21] part: move efi_guid_t   Alexander Graf
  • [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions   Rob Clark
    • [U-Boot] [U-Boot, v3, 02/21] part: extract MBR signature from partitions   Alexander Graf
  • [U-Boot] [PATCH v3 03/21] efi: add some missing __packed   Rob Clark
    • [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed   Heinrich Schuchardt
      • [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed   Rob Clark
    • [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed   Alexander Graf
  • [U-Boot] [PATCH v3 04/21] efi: add some more device path structures   Rob Clark
    • [U-Boot] [U-Boot, v3, 04/21] efi: add some more device path structures   Alexander Graf
  • [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils   Rob Clark
    • [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils   Alexander Graf
      • [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils   Rob Clark
    • [U-Boot] [U-Boot,v3,05/21] efi_loader: add device-path utils   Alexander Graf
  • [U-Boot] [PATCH v3 06/21] efi_loader: drop redundant efi_device_path_protocol   Rob Clark
    • [U-Boot] [U-Boot, v3, 06/21] efi_loader: drop redundant efi_device_path_protocol   Alexander Graf
  • [U-Boot] [PATCH v3 07/21] efi_loader: flesh out device-path to text   Rob Clark
    • [U-Boot] [U-Boot, v3, 07/21] efi_loader: flesh out device-path to text   Alexander Graf
  • [U-Boot] [PATCH v3 08/21] efi_loader: use proper device-paths for partitions   Rob Clark
    • [U-Boot] [U-Boot, v3, 08/21] efi_loader: use proper device-paths for partitions   Alexander Graf
  • [U-Boot] [PATCH v3 09/21] efi_loader: use proper device-paths for net   Rob Clark
    • [U-Boot] [U-Boot, v3, 09/21] efi_loader: use proper device-paths for net   Alexander Graf
  • [U-Boot] [PATCH v3 10/21] efi_loader: refactor boot device and loaded_image handling   Rob Clark
    • [U-Boot] [U-Boot, v3, 10/21] efi_loader: refactor boot device and loaded_image handling   Alexander Graf
  • [U-Boot] [PATCH v3 11/21] efi_loader: add file/filesys support   Rob Clark
    • [U-Boot] [U-Boot, v3, 11/21] efi_loader: add file/filesys support   Alexander Graf
  • [U-Boot] [PATCH v3 12/21] efi_loader: support load_image() from a file-path   Rob Clark
    • [U-Boot] [U-Boot, v3, 12/21] efi_loader: support load_image() from a file-path   Alexander Graf
  • [U-Boot] [PATCH v3 13/21] efi_loader: make pool allocations cacheline aligned   Rob Clark
    • [U-Boot] [U-Boot, v3, 13/21] efi_loader: make pool allocations cacheline aligned   Alexander Graf
  • [U-Boot] [PATCH v3 14/21] efi_loader: efi variable support   Rob Clark
    • [U-Boot] [U-Boot,v3,14/21] efi_loader: efi variable support   Alexander Graf
  • [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr   Rob Clark
    • [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr   Alexander Graf
      • [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr   Rob Clark
      • [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr   Simon Glass
      • [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr   Alexander Graf
      • [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr   Rob Clark
      • [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr   Simon Glass
    • [U-Boot] [U-Boot,v3,15/21] efi_loader: add bootmgr   Alexander Graf
  • [U-Boot] [PATCH v3 16/21] efi_loader: file_path should be variable length   Rob Clark
    • [U-Boot] [U-Boot, v3, 16/21] efi_loader: file_path should be variable length   Alexander Graf
  • [U-Boot] [PATCH v3 17/21] efi_loader: set loaded image code/data type properly   Rob Clark
    • [U-Boot] [U-Boot, v3, 17/21] efi_loader: set loaded image code/data type properly   Alexander Graf
  • [U-Boot] [PATCH v3 18/21] efi_loader: print GUIDs   Rob Clark
    • [U-Boot] [U-Boot,v3,18/21] efi_loader: print GUIDs   Alexander Graf
  • [U-Boot] [PATCH v3 19/21] efi_loader: split out escape sequence based size query   Rob Clark
    • [U-Boot] [U-Boot, v3, 19/21] efi_loader: split out escape sequence based size query   Alexander Graf
  • [U-Boot] [PATCH v3 20/21] efi_loader: Correctly figure out size for vidconsole   Rob Clark
    • [U-Boot] [U-Boot, v3, 20/21] efi_loader: Correctly figure out size for vidconsole   Alexander Graf
  • [U-Boot] [PATCH v3 21/21] efi_loader: Some console improvements for vidconsole   Rob Clark
    • [U-Boot] [U-Boot, v3, 21/21] efi_loader: Some console improvements for vidconsole   Alexander Graf
  • [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot   Alexander Graf
• [U-Boot] [PATCH 0/3] dm: video: enhancements for Shell.efi   Rob Clark
  • [U-Boot] [PATCH 1/3] dm: video: Fix cache flushes   Rob Clark
  • [U-Boot] [PATCH 3/3] dm: video: Add color ANSI escape sequence support   Rob Clark
  • [U-Boot] [PATCH 0/3] dm: video: enhancements for Shell.efi   Simon Glass
    • [U-Boot] [PATCH 0/3] dm: video: enhancements for Shell.efi   Rob Clark
  • [U-Boot] [PATCH 0/3] dm: video: enhancements for Shell.efi   Anatolij Gustschin
• [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support   Rob Clark
  • [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support   Simon Glass
    • [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support   Rob Clark
      • [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support   Simon Glass
      • [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support   Rob Clark
      • [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support   Simon Glass
• [U-Boot] [PATCH] serial: serial_sh: take into account port->clk_mode for SH7785/7786   Thomas Petazzoni
  • [U-Boot] [PATCH] serial: serial_sh: take into account port->clk_mode for SH7785/7786   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] serial: serial_sh: take into account port->clk_mode for SH7785/7786   Thomas Petazzoni
• [U-Boot] I/O accessors on SuperH and endianness   Thomas Petazzoni
• [U-Boot] undefined reference to `environment'   Thomas Petazzoni
  • [U-Boot] undefined reference to `environment'   Tom Rini
• [U-Boot] [PATCH] test: print_ut: Add test for %ls strings   Rob Clark
  • [U-Boot] [PATCH] test: print_ut: Add test for %ls strings   Simon Glass
    • [U-Boot] [PATCH] test: print_ut: Add test for %ls strings   sjg at google.com
• [U-Boot] [PATCH 1/3] nds32: mtd: add spi flash id MX25U16335E.   Andes
• [U-Boot] [PATCH 2/3] nds32: board: Support SPI driver.   Andes
• [U-Boot] [PATCH 3/3] nds32: spi: Support spi dm driver.   Andes
• [U-Boot] spl: add newline in debug output   Tom Rini
• [U-Boot] ARM: dts: ethernut5: Fix the build warning   Tom Rini
• [U-Boot] omap3: omap3_logic: Finish enabling fastboot on MUSB   Tom Rini
• [U-Boot] [U-Boot, v2] serial: nulldev: Add nulldev serial driver   Tom Rini
• [U-Boot] [U-Boot, V3] arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5   Tom Rini
• [U-Boot] [PATCH v3 0/5] configs: at91: Remove value of CONFIG_SYS_EXTRA_OPTIONS option   Wenyou Yang
  • [U-Boot] [PATCH v3 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig   Tom Rini
  • [U-Boot] [PATCH v3 2/5] ARM: at91: Add the SoC options to Kconfig   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 2/5] ARM: at91: Add the SoC options to Kconfig   Tom Rini
  • [U-Boot] [PATCH v3 3/5] ARM: at91: Remove hardware.h included in configs   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 3/5] ARM: at91: Remove hardware.h included in configs   Tom Rini
  • [U-Boot] [PATCH v3 4/5] ARM: at91: spl: Add macro CONFIG_XXXX_BOOT support   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 4/5] ARM: at91: spl: Add macro CONFIG_XXXX_BOOT support   Tom Rini
  • [U-Boot] [PATCH v3 5/5] configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 5/5] configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment   Tom Rini
• [U-Boot] [PATCH v2 0/3] support enter download mode on rockchip platform   Andy Yan
  • [U-Boot] [PATCH v2 1/3] rockchip: make boot_mode related codes reused across all platforms   Andy Yan
  • [U-Boot] [PATCH v2 2/3] rockchip: add support for enter to bootrom download mode   Andy Yan
  • [U-Boot] [PATCH v2 3/3] rockchip: check download key before bootup   Andy Yan
  • [U-Boot] [PATCH v2 0/3] support enter download mode on rockchip platform   Dr. Philipp Tomsich
    • [U-Boot] [PATCH v2 0/3] support enter download mode on rockchip platform   Andy Yan
      • [U-Boot] [PATCH v2 0/3] support enter download mode on rockchip platform   Dr. Philipp Tomsich
• [U-Boot] [User Contribution] Practical Aspects in U-Boot Programming   João Monteiro
• [U-Boot] [PATCH 1/1] test/py: u_boot_console_base.py: fix typo   Heinrich Schuchardt
  • [U-Boot] [U-Boot, 1/1] test/py: u_boot_console_base.py: fix typo   Tom Rini
• [U-Boot] [PATCH v2] arm: am33xx: Make pin multiplexing functions optional   Felix Brack
  • [U-Boot] [PATCH v2] arm: am33xx: Make pin multiplexing functions optional   Tom Rini
  • [U-Boot] [U-Boot, v2] arm: am33xx: Make pin multiplexing functions optional   Tom Rini
• [U-Boot] lib: disable hashtable and display options code in SPL   Tom Rini
• [U-Boot] [PATCH] Travis-CI: Switch back to using the top of tree dtc   Tom Rini
  • [U-Boot] [PATCH] Travis-CI: Switch back to using the top of tree dtc   Simon Glass
    • [U-Boot] [PATCH] Travis-CI: Switch back to using the top of tree dtc   sjg at google.com
• [U-Boot] [PATCH v2 0/7] Enable falcon boot for LS1043ARDB   York Sun
• [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data   York Sun
  • [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data   Simon Glass
    • [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data   York Sun
      • [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data   York Sun
      • [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data   Simon Glass
• [U-Boot] [PATCH v2 2/7] cmd: spl: fix compiling error when CONFIG_CMD_SPL_WRITE_SIZE not defined   York Sun
• [U-Boot] [PATCH v2 3/7] armv8: fsl-layerscape: Avoid running dram_init_banksize again   York Sun
  • [U-Boot] [PATCH v2 3/7] armv8: fsl-layerscape: Avoid running dram_init_banksize again   Simon Glass
• [U-Boot] [PATCH v2 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot   York Sun
• [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot   York Sun
  • [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot   Simon Glass
  • [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot   Albert ARIBAUD (U-Boot)
  • [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot   Łukasz Majewski
    • [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot   Marek Vasut
    • [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot   York Sun
• [U-Boot] [PATCH v2 6/7] armv8: ls1043ardb: Enable spl_board_init() function   York Sun
• [U-Boot] [PATCH v2 7/7] armv8: ls1043ardb_sdcard: Enable falcon boot   York Sun
  • [U-Boot] [PATCH v2 7/7] armv8: ls1043ardb_sdcard: Enable falcon boot   Simon Glass
• [U-Boot] [PATCH] spl: Fix compiling warning on gunzip argument   York Sun
  • [U-Boot] [PATCH] spl: Fix compiling warning on gunzip argument   Jean-Jacques Hiblot
    • [U-Boot] [PATCH] spl: Fix compiling warning on gunzip argument   York Sun
  • [U-Boot] spl: Fix compiling warning on gunzip argument   Tom Rini
    • [U-Boot] spl: Fix compiling warning on gunzip argument   Tom Rini
• [U-Boot] [PATCH] armv7: ls1021a: Fix marco CONFIG_LS102XA   York Sun
  • [U-Boot] [PATCH] armv7: ls1021a: Fix marco CONFIG_LS102XA   York Sun
• [U-Boot] [PATCH] config: ls1012aqds: Add USB EHCI support for ls1012aqds   York Sun
  • [U-Boot] [PATCH] config: ls1012aqds: Add USB EHCI support for ls1012aqds   York Sun
• [U-Boot] [U-Boot, 08/14] usb: dwc3: Add helper functions to enable snooping and burst settings   York Sun
• [U-Boot] [PATCH 0/8] test/py: Fixes for python 3.x   Paul Burton
  • [U-Boot] [PATCH 1/8] test/py: Make print statements python 3.x safe   Paul Burton
  • [U-Boot] [PATCH 2/8] test/py: Use range() rather than xrange()   Paul Burton
  • [U-Boot] [PATCH 3/8] test/py: Import 'configparser' lower case to be python 3.x safe   Paul Burton
    • [U-Boot] [PATCH 3/8] test/py: Import 'configparser' lower case to be python 3.x safe   Stephen Warren
  • [U-Boot] [PATCH 4/8] test/py: Import StringIO from io module for python 3.x   Paul Burton
  • [U-Boot] [PATCH 5/8] test/py: Encode/decode strings for stdio   Paul Burton
  • [U-Boot] [PATCH 6/8] test/py: fit: Open files as binary files   Paul Burton
  • [U-Boot] [PATCH 7/8] test/py: hush_if_test: Use open() in place of file()   Paul Burton
  • [U-Boot] [PATCH 8/8] test/py: vboot: Remove stderr redirect from openssl command   Paul Burton
    • [U-Boot] [PATCH 8/8] test/py: vboot: Remove stderr redirect from openssl command   Stephen Warren
      • [U-Boot] [PATCH 8/8] test/py: vboot: Remove stderr redirect from openssl command   Paul Burton
• [U-Boot] [PATCH] PCI: layerscape: Make the pcie link up status judgement more specific   York Sun
  • [U-Boot] [PATCH] PCI: layerscape: Make the pcie link up status judgement more specific   Xiaowei Bao
• [U-Boot] [PATCH 1/1] board/ls2081ardb: Update display information during boot   York Sun
• [U-Boot] [PATCH] armv8/ls1088a: configure PMU's PCTBENR to enable WDT   York Sun
• [U-Boot] [PATCH v2 1/2] LS1088A_QSPI: SECURE_BOOT: Images validation   York Sun
• [U-Boot] [PATCH v2 2/2] LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.   York Sun
• [U-Boot] [PATCH] LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA.   York Sun
• [U-Boot] [PATCH 1/3] armv8: fsl-layerscape: SPL size reduction   York Sun
• [U-Boot] [PATCH] board/ls2080ardb: Add mcmemsize variable in default env   York Sun
  • [U-Boot] [PATCH] board/ls2080ardb: Add mcmemsize variable in default env   Priyanka Jain
  • [U-Boot] [PATCH] board/ls2080ardb: Add mcmemsize variable in default env   York Sun
• [U-Boot] [PATCH] sf: Fix S25FL116K entry   Marek Vasut
  • [U-Boot] [PATCH] sf: Fix S25FL116K entry   Jagan Teki
• [U-Boot] [PATCH 1/4] arm64: ls1043ardb: Add sd_bootcmd for distro fallback in case of sdboot   York Sun
• [U-Boot] [PATCH v2 0/8] test/py: Fixes for python 3.x   Paul Burton
  • [U-Boot] [PATCH v2 1/8] test/py: Make print statements python 3.x safe   Paul Burton
  • [U-Boot] [PATCH v2 2/8] test/py: Use range() rather than xrange()   Paul Burton
  • [U-Boot] [PATCH v2 3/8] test/py: Import 'configparser' lower case to be python 3.x safe   Paul Burton
  • [U-Boot] [PATCH v2 4/8] test/py: Import StringIO from io module for python 3.x   Paul Burton
    • [U-Boot] [U-Boot, v2, 4/8] test/py: Import StringIO from io module for python 3.x   Tom Rini
      • [U-Boot] [U-Boot, v2, 4/8] test/py: Import StringIO from io module for python 3.x   Paul Burton
      • [U-Boot] [U-Boot, v2, 4/8] test/py: Import StringIO from io module for python 3.x   Stephen Warren
      • [U-Boot] [U-Boot, v2, 4/8] test/py: Import StringIO from io module for python 3.x   Tom Rini
  • [U-Boot] [PATCH v2 5/8] test/py: Encode/decode strings for stdio   Paul Burton
    • [U-Boot] [U-Boot, v2, 5/8] test/py: Encode/decode strings for stdio   Tom Rini
  • [U-Boot] [PATCH v2 6/8] test/py: fit: Open files as binary files   Paul Burton
  • [U-Boot] [PATCH v2 7/8] test/py: hush_if_test: Use open() in place of file()   Paul Burton
  • [U-Boot] [PATCH v2 8/8] test/py: vboot: Remove stderr redirect from openssl command   Paul Burton
• [U-Boot] [PATCH v2 00/13] Add asm-generic/io.h; virt_to_phys(), phys_to_virt() for all arches   Paul Burton
  • [U-Boot] [PATCH v2 01/13] Provide a generic io.h & address mapping functions   Paul Burton
    • [U-Boot] [PATCH v2 01/13] Provide a generic io.h & address mapping functions   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 02/13] arc: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 03/13] arm: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 04/13] m68k: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 05/13] microblaze: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 06/13] nds32: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 07/13] sh: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 08/13] x86: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 09/13] xtensa: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 10/13] mips: Use asm-generic/io.h   Paul Burton
    • [U-Boot] [PATCH v2 10/13] mips: Use asm-generic/io.h   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 11/13] nios2: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 12/13] powerpc: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH v2 13/13] sandbox: Use asm-generic/io.h   Paul Burton
• [U-Boot] [v2] armv8: ls1043a: disable IFC in SPL only when QSPI is used   Yangbo Lu
  • [U-Boot] [v2] armv8: ls1043a: disable IFC in SPL only when QSPI is used   York Sun
• [U-Boot] [PATCH v4 0/3] Allwinner DE2 HDMI SimpleFB support   Icenowy Zheng
  • [U-Boot] [PATCH v4 1/3] video: sunxi: extract simplefb match code to a new file   Icenowy Zheng
  • [U-Boot] [PATCH v4 2/3] video: add an option for video simplefb via DT   Icenowy Zheng
    • [U-Boot] [PATCH v4 2/3] video: add an option for video simplefb via DT   Maxime Ripard
      • [U-Boot] [PATCH v4 2/3] video: add an option for video simplefb via DT   Icenowy Zheng
      • [U-Boot] [PATCH v4 2/3] video: add an option for video simplefb via DT   Maxime Ripard
  • [U-Boot] [PATCH v4 3/3] sunxi: setup simplefb for Allwinner DE2   Icenowy Zheng
  • [U-Boot] [PATCH v4 0/3] Allwinner DE2 HDMI SimpleFB support   Peter Robinson
    • [U-Boot] [PATCH v4 0/3] Allwinner DE2 HDMI SimpleFB support   Maxime Ripard
      • [U-Boot] [PATCH v4 0/3] Allwinner DE2 HDMI SimpleFB support   icenowy at aosc.io
• [U-Boot] efi_loader: queued patches   Heinrich Schuchardt
  • [U-Boot] efi_loader: queued patches   Rob Clark
  • [U-Boot] efi_loader: queued patches   Rob Clark
• [U-Boot] [PATCH][v3]board/ls2080ardb: Update board env based on SoC   Priyanka Jain
  • [U-Boot] [PATCH][v3]board/ls2080ardb: Update board env based on SoC   York Sun
• [U-Boot] [PATCH v2 0/5] board: atmel: Convert to support video driver model   Wenyou Yang
  • [U-Boot] [PATCH v2 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO   Wenyou Yang
    • [U-Boot] [PATCH v2 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO   Simon Glass
  • [U-Boot] [PATCH v2 2/5] board: sama5d3xek: Convert to CONFIG_DM_VIDEO   Wenyou Yang
    • [U-Boot] [PATCH v2 2/5] board: sama5d3xek: Convert to CONFIG_DM_VIDEO   Simon Glass
  • [U-Boot] [PATCH v2 3/5] board: sama5d4ek: Convert to CONFIG_DM_VIDEO   Wenyou Yang
    • [U-Boot] [PATCH v2 3/5] board: sama5d4ek: Convert to CONFIG_DM_VIDEO   Simon Glass
  • [U-Boot] [PATCH v2 4/5] board: sama5d4_xplained: Convert to CONFIG_DM_VIDEO   Wenyou Yang
    • [U-Boot] [PATCH v2 4/5] board: sama5d4_xplained: Convert to CONFIG_DM_VIDEO   Simon Glass
  • [U-Boot] [PATCH v2 5/5] board: at91sam9x5ek: Convert to CONFIG_DM_VIDEO   Wenyou Yang
    • [U-Boot] [PATCH v2 5/5] board: at91sam9x5ek: Convert to CONFIG_DM_VIDEO   Simon Glass
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
  • [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] Pull request: u-boot-ubi/master   Heiko Schocher
  • [U-Boot] Pull request: u-boot-ubi/master   Tom Rini
• [U-Boot] [PATCH 16/23] efi_loader: implement DisconnectController   Heinrich Schuchardt
  • [U-Boot] [PATCH 16/23] efi_loader: implement DisconnectController   Simon Glass
    • [U-Boot] [PATCH 16/23] efi_loader: implement DisconnectController   Rob Clark
      • [U-Boot] [PATCH 16/23] efi_loader: implement DisconnectController   Simon Glass
• [U-Boot] [PATCH 15/23] efi_loader: implement ConnectController   Heinrich Schuchardt
  • [U-Boot] [PATCH 15/23] efi_loader: implement ConnectController   Simon Glass
• [U-Boot] [PATCH] net/tftp: fix build if CMD_BOOTEFI is not set   Jörg Krause
  • [U-Boot] [PATCH] net/tftp: fix build if CMD_BOOTEFI is not set   Bin Meng
• [U-Boot] [PATCH 1/1] efi_loader: provide comment for protocol GUIDs   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_loader: provide comment for protocol GUIDs   Simon Glass
• [U-Boot] [PATCH] spl: fit: Fixed incompatible type warning in spl_load_fit_image()   Jean-Jacques Hiblot
  • [U-Boot] [PATCH] spl: fit: Fixed incompatible type warning in spl_load_fit_image()   Tom Rini
    • [U-Boot] [PATCH] spl: fit: Fixed incompatible type warning in spl_load_fit_image()   Jean-Jacques Hiblot
      • [U-Boot] [PATCH] spl: fit: Fixed incompatible type warning in spl_load_fit_image()   York Sun
• [U-Boot] [PATCH 00/10] efi_loader: event services & API test   Heinrich Schuchardt
  • [U-Boot] [PATCH 02/10] efi_selftest: provide an EFI selftest application   Heinrich Schuchardt
    • [U-Boot] [PATCH 02/10] efi_selftest: provide an EFI selftest application   Simon Glass
  • [U-Boot] [PATCH 03/10] test/py: add a test calling the EFI selftest   Heinrich Schuchardt
    • [U-Boot] [PATCH 03/10] test/py: add a test calling the EFI selftest   Simon Glass
  • [U-Boot] [PATCH 04/10] efi_loader: implement queueing of the notification function   Heinrich Schuchardt
    • [U-Boot] [PATCH 04/10] efi_loader: implement queueing of the notification function   Simon Glass
      • [U-Boot] [PATCH 04/10] efi_loader: implement queueing of the notification function   Heinrich Schuchardt
  • [U-Boot] [PATCH 05/10] efi_loader: efi_set_timer: reset signaled state   Heinrich Schuchardt
    • [U-Boot] [PATCH 05/10] efi_loader: efi_set_timer: reset signaled state   Simon Glass
  • [U-Boot] [PATCH 06/10] efi_selftest: provide unit test for event services   Heinrich Schuchardt
    • [U-Boot] [PATCH 06/10] efi_selftest: provide unit test for event services   Simon Glass
  • [U-Boot] [PATCH 07/10] efi_loader: implement task priority level (TPL)   Heinrich Schuchardt
    • [U-Boot] [PATCH 07/10] efi_loader: implement task priority level (TPL)   Simon Glass
  • [U-Boot] [PATCH 08/10] efi_selftest: test task priority levels   Heinrich Schuchardt
    • [U-Boot] [PATCH 08/10] efi_selftest: test task priority levels   Simon Glass
      • [U-Boot] [PATCH 08/10] efi_selftest: test task priority levels   Heinrich Schuchardt
  • [U-Boot] [PATCH 09/10] efi_loader: notify when ExitBootServices is invoked   Heinrich Schuchardt
    • [U-Boot] [PATCH 09/10] efi_loader: notify when ExitBootServices is invoked   Simon Glass
  • [U-Boot] [PATCH 10/10] efi_selftest: check notification of ExitBootServices   Heinrich Schuchardt
    • [U-Boot] [PATCH 10/10] efi_selftest: check notification of ExitBootServices   Simon Glass
      • [U-Boot] [PATCH 10/10] efi_selftest: check notification of ExitBootServices   Heinrich Schuchardt
  • [U-Boot] [PATCH 00/10] efi_loader: event services & API test   Simon Glass
    • [U-Boot] [PATCH 00/10] efi_loader: event services & API test   Rob Clark
    • [U-Boot] [PATCH 00/10] efi_loader: event services & API test   Heinrich Schuchardt
      • [U-Boot] [PATCH 00/10] efi_loader: event services & API test   Simon Glass
• [U-Boot] [PATCH 01/10] efi_loader: allow return value in EFI_CALL   Heinrich Schuchardt
  • [U-Boot] [PATCH 01/10] efi_loader: allow return value in EFI_CALL   Simon Glass
• [U-Boot] [PATCH] arm: dts: Add missing u-boot specific dtsi for dra7-evm   Jean-Jacques Hiblot
  • [U-Boot] [PATCH] arm: dts: Add missing u-boot specific dtsi for dra7-evm   Lokesh Vutla
  • [U-Boot] arm: dts: Add missing u-boot specific dtsi for dra7-evm   Tom Rini
• [U-Boot] [PATCH] ARM: davinci: Remove CONFIG_SOC_DA830   Adam Ford
  • [U-Boot] ARM: davinci: Remove CONFIG_SOC_DA830   Tom Rini
• [U-Boot] [PATCH v6 00/10] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v6 01/10] dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v6 02/10] fit: use 'const' for the input of fdt_offset() and locate_dtb_in_fit()   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v6 03/10] fit: fixed bug in locate_dtb_in_fit()   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v6 04/10] fit: If no matching config is found in fit_find_config_node(), use the default one   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v6 05/10] lzo: add a function to check the validity of the header   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v6 06/10] gzip: add a function to parse the header   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v6 07/10] lib: allow building lzo for the SPL   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v6 08/10] fdtdec: sort include files   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v6 08/10] fdtdec: sort include files   Simon Glass
  • [U-Boot] [PATCH v6 09/10] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v6 10/10] omap: detect board before spl_early_init()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 05/16] dtoc: Add support for 32 or 64-bit addresses   Simon Glass
  • [U-Boot] [PATCH v2 05/16] dtoc: Add support for 32 or 64-bit addresses   sjg at google.com
• [U-Boot] [PATCH] cmd/gpt.c: Fix warning over memset args in allocate_disk_part   Tom Rini
  • [U-Boot] [PATCH] cmd/gpt.c: Fix warning over memset args in allocate_disk_part   Alison Chaiken
• [U-Boot] [PATCH 0/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Philipp Tomsich
  • [U-Boot] [PATCH 1/3] arm: make save_boot_params_ret prototype visible for AArch64   Philipp Tomsich
    • [U-Boot] [PATCH 1/3] arm: make save_boot_params_ret prototype visible for AArch64   Simon Glass
  • [U-Boot] [PATCH 3/3] rockchip: back-to-bootrom: allow passing a cmd to the bootrom   Philipp Tomsich
    • [U-Boot] [PATCH 3/3] rockchip: back-to-bootrom: allow passing a cmd to the bootrom   Simon Glass
• [U-Boot] [PATCH 2/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Philipp Tomsich
  • [U-Boot] [PATCH 2/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Andy Yan
    • [U-Boot] [PATCH 2/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
    • [U-Boot] [PATCH 2/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/4] mtd: nand: denali: allow to override corrupted revision register   Masahiro Yamada
  • [U-Boot] [PATCH 3/4] ARM: uniphier: remove bit field macros from sc64-regs.h   Masahiro Yamada
  • [U-Boot] [PATCH 4/4] ARM: uniphier: add GPU(Mali) reset deassert and clk enable   Masahiro Yamada
  • [U-Boot] [PATCH 1/4] mtd: nand: denali: allow to override corrupted revision register   Masahiro Yamada
• [U-Boot] [PATCH 2/4] ARM: uniphier: merge two defconfig files into uniphier_v7_defconfig   Masahiro Yamada
• [U-Boot] [PATCH 1/2] mtd: nand: do not check R/B# for CMD_READID in nand_command(_lp)   Masahiro Yamada
• [U-Boot] [PATCH 2/2] mtd: nand: do not check R/B# for CMD_SET_FEATURES in nand_command(_lp)   Masahiro Yamada
• [U-Boot] [PATCH] rockchip: puma_rk3399: increase serialno_str size   Klaus Goger
  • [U-Boot] rockchip: puma_rk3399: increase serialno_str size   Philipp Tomsich
  • [U-Boot] rockchip: puma_rk3399: increase serialno_str size   Philipp Tomsich
  • [U-Boot] rockchip: puma_rk3399: increase serialno_str size   Philipp Tomsich
• [U-Boot] Please pull u-boot-video/next   Anatolij Gustschin
  • [U-Boot] Please pull u-boot-video/next   Tom Rini
• [U-Boot] [PATCH] rockchip: board: lion-rk3368: avoid ATF overwriting active SPL stage   Philipp Tomsich
  • [U-Boot] [PATCH] rockchip: board: lion-rk3368: avoid ATF overwriting active SPL stage   Simon Glass
  • [U-Boot] rockchip: board: lion-rk3368: avoid ATF overwriting active SPL stage   Philipp Tomsich
• [U-Boot] [PATCH] Fix s25fl256s position in spi_flash_ids list   Vsevolod Gribov
  • [U-Boot] [PATCH] Fix s25fl256s position in spi_flash_ids list   Jagan Teki
• [U-Boot] [Patch v2] spl: Fix compiling warning on gunzip argument   York Sun
  • [U-Boot] [Patch v2] spl: Fix compiling warning on gunzip argument   York Sun
    • [U-Boot] [Patch v2] spl: Fix compiling warning on gunzip argument   Tom Rini
  • [U-Boot] [U-Boot, v2] spl: Fix compiling warning on gunzip argument   Tom Rini
• [U-Boot] [PATCH] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
  • [U-Boot] [PATCH] Makefile: Update minimum dtc version to 1.4.3   Stephen Warren
    • [U-Boot] [PATCH] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
  • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
    • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Marek Vasut
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Marek Vasut
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Marek Vasut
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Bin Meng
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Robert Nelson
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Marek Vasut
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Marek Vasut
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Łukasz Majewski
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Marek Vasut
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Simon Glass
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Marek Vasut
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Marek Vasut
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Marek Vasut
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Heinrich Schuchardt
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Łukasz Majewski
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Tom Rini
      • [U-Boot] Makefile: Update minimum dtc version to 1.4.3   Vagrant Cascadian
• [U-Boot] [PATCH] test/py: gpt: make use of infra-structure   Stephen Warren
  • [U-Boot] [PATCH] test/py: gpt: make use of infra-structure   Tom Rini
    • [U-Boot] [PATCH] test/py: gpt: make use of infra-structure   Alison Chaiken
      • [U-Boot] [PATCH] test/py: gpt: make use of infra-structure   Stephen Warren
• [U-Boot] [PATCH V2] test/py: gpt: make use of infra-structure   Stephen Warren
  • [U-Boot] [PATCH V2] test/py: gpt: make use of infra-structure   Tom Rini
  • [U-Boot] [U-Boot,V2] test/py: gpt: make use of infra-structure   Tom Rini
• [U-Boot] [PATCH] boston: Drop unused return value   Paul Burton
  • [U-Boot] [PATCH] boston: Drop unused return value   Daniel Schwierzeck
• [U-Boot] [PATCH] boston: Remove unused label in lowlevel_display   Paul Burton
  • [U-Boot] [PATCH] boston: Remove unused label in lowlevel_display   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: Drop unused PTR_COUNT_SHIFT from u-boot.lds   Paul Burton
  • [U-Boot] [PATCH] MIPS: Drop unused PTR_COUNT_SHIFT from u-boot.lds   Daniel Schwierzeck
• [U-Boot] [PATCH] ARM: rmobile: Place initial stack right below U-Boot   Marek Vasut
• [U-Boot] [PATCH] clk: rmobile: Add support for setting SDxCKCR   Marek Vasut
• [U-Boot] [PATCH] clk: rmobile: Add RPC hyperflash clock   Marek Vasut
• [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support   Marek Vasut
  • [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support   Marek Vasut
    • [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support   Jaehoon Chung
      • [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support   Masahiro Yamada
      • [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support   Marek Vasut
      • [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support   Masahiro Yamada
      • [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support   Marek Vasut
    • [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support   Jaehoon Chung
• [U-Boot] [PATCH] net: ravb: Add PHY reset GPIO support   Marek Vasut
  • [U-Boot] [PATCH] net: ravb: Add PHY reset GPIO support   Joe Hershberger
• [U-Boot] [PATCH] serial: sh: Enable clock if available   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: rmobile: Add PHY reset GPIO   Marek Vasut
• [U-Boot] [PATCH 1/3] ARM: rmobile: Remove SD clock configuration from board files   Marek Vasut
  • [U-Boot] [PATCH 2/3] ARM: rmobile: Remove AVB clock configuration from board files   Marek Vasut
  • [U-Boot] [PATCH 3/3] ARM: rmobile: Remove SCIF clock configuration from board files   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Enable DM regulator support   Marek Vasut
  • [U-Boot] [PATCH] ARM: rmobile: Enable DM regulator support   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] ARM: rmobile: Enable GPIO command   Marek Vasut
• [U-Boot] [PATCH 1/5] pinctrl: rmobile: Add Renesas RCar pincontrol driver   Marek Vasut
  • [U-Boot] [PATCH 5/5] ARM: rmobile: Zap Gen3 PFC tables   Marek Vasut
• [U-Boot] [PATCH 2/5] gpio: rmobile: Add Renesas RCar GPIO driver   Marek Vasut
• [U-Boot] [PATCH 3/5] ARM: rmobile: Switch to DM PFC pinmux and GPIO driver   Marek Vasut
• [U-Boot] [PATCH 4/5] ARM: rmobile: Zap ad-hoc PFC and GPIO setup in board files   Marek Vasut
• [U-Boot] [PATCH v2 16/16] dtoc: Add a header to the generated files   sjg at google.com
• [U-Boot] [PATCH v2 15/16] dtoc: Rename the auto-generated dt-structs.h file   sjg at google.com
• [U-Boot] [PATCH v2 14/16] dtoc: Support properties containing multiple phandle values   sjg at google.com
• [U-Boot] [PATCH v2 13/16] dtoc: Put phandle args in an array   sjg at google.com
• [U-Boot] [PATCH v2 12/16] dtoc: Put each phandle on a separate line   sjg at google.com
• [U-Boot] [PATCH v2 10/16] dtoc: Rename is_phandle() and adjust it to return more detail   sjg at google.com
• [U-Boot] [PATCH v2 11/16] dtoc: Rename the phandle struct   sjg at google.com
• [U-Boot] [PATCH v2 09/16] dtoc: Make is_phandle() a member function   sjg at google.com
• [U-Boot] [PATCH v2 08/16] dtoc: Use the Fdt's class's phandle map   sjg at google.com
• [U-Boot] [PATCH v2 07/16] dtoc: Update the Fdt class to record phandles   sjg at google.com
• [U-Boot] [PATCH v2 06/16] dtoc: Handle 'reg' properties with unusual sizes   sjg at google.com
• [U-Boot] [PATCH v2 04/16] dtoc: Avoid very long lines in output   sjg at google.com
• [U-Boot] [PATCH v2 03/16] dtoc: Add a 64-bit type and a way to convert cells into 64 bits   sjg at google.com
• [U-Boot] [PATCH v2 01/16] fdt: Sync libfdt up to upstream   sjg at google.com
• [U-Boot] [PATCH v2 02/16] dtoc: Adjust Node to record its parent   sjg at google.com
• [U-Boot] Please pull u-boot-fdt   Simon Glass
  • [U-Boot] Please pull u-boot-fdt   Tom Rini
• [U-Boot] [PATCH v2] net/tftp: fix build if CMD_BOOTEFI is not set   Jörg Krause
  • [U-Boot] [PATCH v2] net/tftp: fix build if CMD_BOOTEFI is not set   Bin Meng
  • [U-Boot] [U-Boot, v2] net/tftp: fix build if CMD_BOOTEFI is not set   Tom Rini
• [U-Boot] [PATCH] gpio: Kconfig: DM_GPIO depends on OF_CONTROL   Jörg Krause
• [U-Boot] [PATCH 09/13] x86: Add Intel Braswell SoC support   Bin Meng
• [U-Boot] [PATCH 10/13] x86: braswell: Add microcode for B0/C0/D0 stepping SoC   Bin Meng
• [U-Boot] [PATCH 12/13] x86: braswell: Disable PUNIT power configuration for B0 stepping   Bin Meng
• [U-Boot] [PATCH 13/13] x86: Support Intel Cherry Hill board   Bin Meng
• [U-Boot] [PATCH v2 0/8] Sync and consolidate Linux-derived printk, BUILD_BUG, BUG, WARN, etc.   Masahiro Yamada
  • [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()   Masahiro Yamada
    • [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()   Simon Glass
    • [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()   Masahiro Yamada
      • [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()   Tom Rini
      • [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()   Masahiro Yamada
      • [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()   Tom Rini
• [U-Boot] [PATCH v2 1/8] stdio.h: move printf() stuff from <common.h> to <stdio.h>   Masahiro Yamada
• [U-Boot] [PATCH v2 2/8] printk: collect printk stuff into <linux/printk.h> with loglevel support   Masahiro Yamada
• [U-Boot] [PATCH v2 4/8] common.h: remove error()   Masahiro Yamada
• [U-Boot] [PATCH v2 5/8] vsprintf.h: include <linux/types.h>   Masahiro Yamada
• [U-Boot] [PATCH v2 6/8] bug.h: sync BUILD_BUG stuff with Linux 4.13   Masahiro Yamada
• [U-Boot] [PATCH v2 7/8] bug.h: move runtime BUG/WARN macros into <linux/bug.h>   Masahiro Yamada
• [U-Boot] [PATCH v2 8/8] dm: define dev_*() log functions in DM header   Masahiro Yamada
  • [U-Boot] [PATCH v2 8/8] dm: define dev_*() log functions in DM header   Simon Glass
    • [U-Boot] [PATCH v2 8/8] dm: define dev_*() log functions in DM header   Masahiro Yamada
• [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG   Lokesh Vutla
  • [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG   Tom Rini
    • [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG   Simon Glass
      • [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG   Lokesh Vutla
      • [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG   Simon Glass
      • [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG   Lokesh Vutla
• [U-Boot] [PATCH] efi_loader: fix TEST_PROTOCOL case in OpenProtocol()   Rob Clark
  • [U-Boot] [PATCH] efi_loader: fix TEST_PROTOCOL case in OpenProtocol()   Heinrich Schuchardt
    • [U-Boot] [PATCH] efi_loader: fix TEST_PROTOCOL case in OpenProtocol()   Rob Clark
• [U-Boot] Adding new net command   Duncan Hare
• [U-Boot] [PATCH 00/13] log: Add a new logging feature   Simon Glass
  • [U-Boot] [PATCH 05/13] Drop the log buffer   Simon Glass
    • [U-Boot] [PATCH 05/13] Drop the log buffer   Bin Meng
  • [U-Boot] [PATCH 00/13] log: Add a new logging feature   Masahiro Yamada
    • [U-Boot] [PATCH 00/13] log: Add a new logging feature   Heinrich Schuchardt
      • [U-Boot] [PATCH 00/13] log: Add a new logging feature   Simon Glass
  • [U-Boot] [PATCH 00/13] log: Add a new logging feature   Wolfgang Denk
    • [U-Boot] [PATCH 00/13] log: Add a new logging feature   Simon Glass
• [U-Boot] [PATCH 01/13] Revert "sandbox: remove os_putc() and os_puts()"   Simon Glass
  • [U-Boot] [PATCH 01/13] Revert "sandbox: remove os_putc() and os_puts()"   Bin Meng
    • [U-Boot] [PATCH 01/13] Revert "sandbox: remove os_putc() and os_puts()"   Simon Glass
• [U-Boot] [PATCH 02/13] Revert "sandbox: Drop special case console code for sandbox"   Simon Glass
  • [U-Boot] [PATCH 02/13] Revert "sandbox: Drop special case console code for sandbox"   Bin Meng
    • [U-Boot] [PATCH 02/13] Revert "sandbox: Drop special case console code for sandbox"   Simon Glass
• [U-Boot] [PATCH 03/13] Move debug and logging support to a separate header   Simon Glass
  • [U-Boot] [PATCH 03/13] Move debug and logging support to a separate header   Bin Meng
• [U-Boot] [PATCH 04/13] mtdparts: Correct use of debug()   Simon Glass
  • [U-Boot] [PATCH 04/13] mtdparts: Correct use of debug()   Bin Meng
• [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Simon Glass
  • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Bin Meng
    • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Simon Glass
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Bin Meng
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Dr. Philipp Tomsich
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Simon Glass
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Bin Meng
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Simon Glass
  • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Masahiro Yamada
    • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Simon Glass
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Dr. Philipp Tomsich
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Masahiro Yamada
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Dr. Philipp Tomsich
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Masahiro Yamada
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Masahiro Yamada
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Simon Glass
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Masahiro Yamada
      • [U-Boot] [PATCH 06/13] log: Add an implemention of logging   Simon Glass
• [U-Boot] [PATCH 07/13] log: Add a console driver   Simon Glass
  • [U-Boot] [PATCH 07/13] log: Add a console driver   Bin Meng
    • [U-Boot] [PATCH 07/13] log: Add a console driver   Simon Glass
• [U-Boot] [PATCH 08/13] log: Add a 'log level' command   Simon Glass
  • [U-Boot] [PATCH 08/13] log: Add a 'log level' command   Bin Meng
• [U-Boot] [PATCH 09/13] log: Add a test command   Simon Glass
  • [U-Boot] [PATCH 09/13] log: Add a test command   Bin Meng
• [U-Boot] [PATCH 10/13] log: Plumb logging into the init sequence   Simon Glass
  • [U-Boot] [PATCH 10/13] log: Plumb logging into the init sequence   Bin Meng
• [U-Boot] [PATCH 11/13] log: sandbox: Enable logging   Simon Glass
  • [U-Boot] [PATCH 11/13] log: sandbox: Enable logging   Bin Meng
• [U-Boot] [PATCH 12/13] log: test: Add a pytest for logging   Simon Glass
• [U-Boot] [PATCH 13/13] log: Add documentation   Simon Glass
  • [U-Boot] [PATCH 13/13] log: Add documentation   Bin Meng
  • [U-Boot] [PATCH 13/13] log: Add documentation   Masahiro Yamada
    • [U-Boot] [PATCH 13/13] log: Add documentation   Simon Glass
• [U-Boot] [PATCH 1/1] x86: provide CONFIG_BUILD_ROM   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] x86: provide CONFIG_BUILD_ROM   Bin Meng
    • [U-Boot] [PATCH 1/1] x86: provide CONFIG_BUILD_ROM   Heinrich Schuchardt
      • [U-Boot] [PATCH 1/1] x86: provide CONFIG_BUILD_ROM   Bin Meng
• [U-Boot] [PATCH please test] fs/fat: reduce stack usage for SPL   Rob Clark
  • [U-Boot] [PATCH please test] fs/fat: reduce stack usage for SPL   Tom Rini
    • [U-Boot] [PATCH please test] fs/fat: reduce stack usage for SPL   Adam Ford
  • [U-Boot] [PATCHv2] fs/fat: Reduce stack usage   Tom Rini
    • [U-Boot] [PATCHv2] fs/fat: Reduce stack usage   Tom Rini
• [U-Boot] [PATCH] Travis-CI: Checkout only v1.4.3 of dtc   Tom Rini
  • [U-Boot] Travis-CI: Checkout only v1.4.3 of dtc   Tom Rini
• [U-Boot] [PATCH] TI: ARCH_OMAP2PLUS: Enable SPL_STACK_R and provide default value   Tom Rini
  • [U-Boot] TI: ARCH_OMAP2PLUS: Enable SPL_STACK_R and provide default value   Tom Rini
• [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Stephen Warren
    • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Tom Rini
    • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Stephen Warren
    • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Heinrich Schuchardt
      • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Stephen Warren
      • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Heinrich Schuchardt
      • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Stephen Warren
      • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Heinrich Schuchardt
      • [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu   Stephen Warren
• [U-Boot] [PATCH 1/4] dm: gpio: vybrid_gpio: Correct driver's use of bind() method   Simon Glass
  • [U-Boot] [PATCH 3/4] dm: gpio: Correct use of -ENODEV in drivers   Simon Glass
    • [U-Boot] [PATCH 3/4] dm: gpio: Correct use of -ENODEV in drivers   sjg at google.com
  • [U-Boot] [PATCH 4/4] dm: gpio: pca953x: Drop pointless data structure checks   Simon Glass
    • [U-Boot] [PATCH 4/4] dm: gpio: pca953x: Drop pointless data structure checks   sjg at google.com
  • [U-Boot] [PATCH 1/4] dm: gpio: vybrid_gpio: Correct driver's use of bind() method   sjg at google.com
• [U-Boot] [PATCH 2/4] dm: gpio: Add a comment about not copying some drivers   Simon Glass
  • [U-Boot] [PATCH 2/4] dm: gpio: Add a comment about not copying some drivers   sjg at google.com
• [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Simon Glass
  • [U-Boot] [PATCH 01/16] efi: Update efi_smbios_register() to return error code   Simon Glass
    • [U-Boot] [PATCH 01/16] efi: Update efi_smbios_register() to return error code   Heinrich Schuchardt
  • [U-Boot] [PATCH 02/16] efi: Move the init check inside efi_init_obj_list()   Simon Glass
    • [U-Boot] [PATCH 02/16] efi: Move the init check inside efi_init_obj_list()   Heinrich Schuchardt
  • [U-Boot] [PATCH 03/16] efi: Add error checking for efi_init_obj_list()   Simon Glass
    • [U-Boot] [PATCH 03/16] efi: Add error checking for efi_init_obj_list()   Heinrich Schuchardt
  • [U-Boot] [PATCH 04/16] efi: Add a TODO to efi_init_obj_list()   Simon Glass
    • [U-Boot] [PATCH 04/16] efi: Add a TODO to efi_init_obj_list()   Heinrich Schuchardt
  • [U-Boot] [PATCH 05/16] efi: Correct header order in efi_memory   Simon Glass
    • [U-Boot] [PATCH 05/16] efi: Correct header order in efi_memory   Heinrich Schuchardt
  • [U-Boot] [PATCH 06/16] efi: sandbox: Adjust memory setup for sandbox   Simon Glass
    • [U-Boot] [PATCH 06/16] efi: sandbox: Adjust memory setup for sandbox   Heinrich Schuchardt
  • [U-Boot] [PATCH 07/16] sandbox: smbios: Update to support sandbox   Simon Glass
  • [U-Boot] [PATCH 08/16] sandbox: Add a setjmp() implementation   Simon Glass
    • [U-Boot] [PATCH 08/16] sandbox: Add a setjmp() implementation   Heinrich Schuchardt
      • [U-Boot] [PATCH 08/16] sandbox: Add a setjmp() implementation   Rob Clark
      • [U-Boot] [PATCH 08/16] sandbox: Add a setjmp() implementation   Simon Glass
  • [U-Boot] [PATCH 09/16] efi: sandbox: Add required linker sections   Simon Glass
  • [U-Boot] [PATCH 10/16] efi: sandbox: Add distroboot support   Simon Glass
  • [U-Boot] [PATCH 11/16] Define board_quiesce_devices() in a shared location   Simon Glass
  • [U-Boot] [PATCH 12/16] Add a comment for board_quiesce_devices()   Simon Glass
  • [U-Boot] [PATCH 13/16] efi: sandbox: Add relocation constants   Simon Glass
    • [U-Boot] [PATCH 13/16] efi: sandbox: Add relocation constants   Heinrich Schuchardt
  • [U-Boot] [PATCH 14/16] efi: Add a comment about duplicated ELF constants   Simon Glass
  • [U-Boot] [PATCH 15/16] efi: sandbox: Enable EFI loader builder for sandbox   Simon Glass
  • [U-Boot] [PATCH 16/16] efi: sandbox: Add a simple 'bootefi test' command   Simon Glass
    • [U-Boot] [PATCH 16/16] efi: sandbox: Add a simple 'bootefi test' command   Heinrich Schuchardt
      • [U-Boot] [PATCH 16/16] efi: sandbox: Add a simple 'bootefi test' command   Simon Glass
  • [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Heinrich Schuchardt
    • [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Simon Glass
    • [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Rob Clark
      • [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Rob Clark
      • [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Rob Clark
      • [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Rob Clark
      • [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Rob Clark
      • [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Simon Glass
      • [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader   Simon Glass
• [U-Boot] [PATCH V4 0/5] Update DA850 to Device tree, SPI MTDPARTS, and DM   Adam Ford
  • [U-Boot] [PATCH V4 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5   Adam Ford
    • [U-Boot] [PATCH V4 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5   Jagan Teki
      • [U-Boot] [PATCH V4 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5   Adam Ford
    • [U-Boot] [U-Boot, V4, 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5   Tom Rini
  • [U-Boot] [PATCH V4 2/5] spi: davinci_spi: Add da830-spi support for DM   Adam Ford
    • [U-Boot] [U-Boot, V4, 2/5] spi: davinci_spi: Add da830-spi support for DM   Tom Rini
  • [U-Boot] [PATCH V4 3/5] arm: da850-evm: Enable DM and device tree support for da850-evm   Adam Ford
    • [U-Boot] [U-Boot, V4, 3/5] arm: da850-evm: Enable DM and device tree support for da850-evm   Tom Rini
  • [U-Boot] [PATCH V4 4/5] arm: da850-evm: Enable MTD Parts in SPI Flash   Adam Ford
    • [U-Boot] [U-Boot, V4, 4/5] arm: da850-evm: Enable MTD Parts in SPI Flash   Tom Rini
  • [U-Boot] [PATCH V4 5/5] ARM: da850-evm: Enable DM_I2C   Adam Ford
    • [U-Boot] [U-Boot,V4,5/5] ARM: da850-evm: Enable DM_I2C   Tom Rini
• [U-Boot] [PATCH 1/5] dm: video: bridge: add operation to read EDID   Vasily Khoruzhick
  • [U-Boot] [PATCH 2/5] video: anx9804: split out registers definitions into a separate header   Vasily Khoruzhick
  • [U-Boot] [PATCH 3/5] video: add anx6345 DM driver   Vasily Khoruzhick
  • [U-Boot] [PATCH 4/5] sunxi: video: split out PLL code   Vasily Khoruzhick
  • [U-Boot] [PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Vasily Khoruzhick
  • [U-Boot] [PATCH 1/5] dm: video: bridge: add operation to read EDID   Vasily Khoruzhick
• [U-Boot] [PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3   Vasily Khoruzhick
  • [U-Boot] [PATCH 2/3] video: pwm_backlight: make regulator optional   Vasily Khoruzhick
  • [U-Boot] [PATCH 3/3] dts: sunxi: add PWM node for sun50i   Vasily Khoruzhick
  • [U-Boot] [PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3   Vasily Khoruzhick
• [U-Boot] [PATCH 1/1] efi_loader: fix typo in include/efi.h   Heinrich Schuchardt
• [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot   Yangbo Lu
  • [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot   York Sun
    • [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot   Y.b. Lu
      • [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot   York Sun
  • [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot   York Sun
• [U-Boot] [PATCH] armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot   Yangbo Lu
  • [U-Boot] [PATCH] armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot   York Sun
• [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model   Wenyou Yang
  • [U-Boot] [PATCH v3 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO   Wenyou Yang
  • [U-Boot] [PATCH v3 2/5] board: sama5d3xek: Convert to CONFIG_DM_VIDEO   Wenyou Yang
  • [U-Boot] [PATCH v3 3/5] board: sama5d4ek: Convert to CONFIG_DM_VIDEO   Wenyou Yang
  • [U-Boot] [PATCH v3 4/5] board: sama5d4_xplained: Convert to CONFIG_DM_VIDEO   Wenyou Yang
  • [U-Boot] [PATCH v3 5/5] board: at91sam9x5ek: Convert to CONFIG_DM_VIDEO   Wenyou Yang
  • [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model   Anatolij Gustschin
• [U-Boot] [PATCH] armv8: ls1046aqds: Fix NAND offset for Fman ucode and env   Gong Qianyu
• [U-Boot] [PATCH 1/1] efi_loader: fix bug in efi_add_known_memory   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_loader: fix bug in efi_add_known_memory   Alexander Graf
    • [U-Boot] [PATCH 1/1] efi_loader: fix bug in efi_add_known_memory   Heinrich Schuchardt
• [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
  • [U-Boot] [PATCH 01/14] dm: usb: Fix broken usb_stop()   Bin Meng
    • [U-Boot] [PATCH 01/14] dm: usb: Fix broken usb_stop()   Stefan Roese
  • [U-Boot] [PATCH 02/14] dm: usb: Remove no longer needed blk_unbind_all()   Bin Meng
    • [U-Boot] [PATCH 02/14] dm: usb: Remove no longer needed blk_unbind_all()   Stefan Roese
  • [U-Boot] [PATCH 03/14] usb: xhci: Don't assume LS/FS devices are always behind a HS hub   Bin Meng
    • [U-Boot] [PATCH 03/14] usb: xhci: Don't assume LS/FS devices are always behind a HS hub   Stefan Roese
  • [U-Boot] [PATCH 04/14] usb: Handle audio extension endpoint descriptor in usb_parse_config()   Bin Meng
    • [U-Boot] [PATCH 04/14] usb: Handle audio extension endpoint descriptor in usb_parse_config()   Stefan Roese
  • [U-Boot] [PATCH 05/14] usb: xhci: Add interrupt transfer support   Bin Meng
    • [U-Boot] [PATCH 05/14] usb: xhci: Add interrupt transfer support   Stefan Roese
  • [U-Boot] [PATCH 06/14] usb: Only get 64 bytes device descriptor for full speed devices   Bin Meng
    • [U-Boot] [PATCH 06/14] usb: Only get 64 bytes device descriptor for full speed devices   Stefan Roese
  • [U-Boot] [PATCH 07/14] usb: Read device descriptor after device is addressed for xHCI   Bin Meng
    • [U-Boot] [PATCH 07/14] usb: Read device descriptor after device is addressed for xHCI   Stefan Roese
  • [U-Boot] [PATCH 08/14] usb: xhci: Fix max packet size for full speed device endpoint 0   Bin Meng
    • [U-Boot] [PATCH 08/14] usb: xhci: Fix max packet size for full speed device endpoint 0   Stefan Roese
  • [U-Boot] [PATCH 09/14] usb: hub: Clear port reset before usb_hub_port_connect_change()   Bin Meng
    • [U-Boot] [PATCH 09/14] usb: hub: Clear port reset before usb_hub_port_connect_change()   Stefan Roese
  • [U-Boot] [PATCH 10/14] usb: hub: Clear BH reset status change for a 3.0 hub   Bin Meng
    • [U-Boot] [PATCH 10/14] usb: hub: Clear BH reset status change for a 3.0 hub   Stefan Roese
  • [U-Boot] [PATCH 11/14] usb: xhci: Honor endpoint's interval   Bin Meng
    • [U-Boot] [PATCH 11/14] usb: xhci: Honor endpoint's interval   Stefan Roese
  • [U-Boot] [PATCH 12/14] usb: xhci: Program max burst size for endpoint   Bin Meng
    • [U-Boot] [PATCH 12/14] usb: xhci: Program max burst size for endpoint   Stefan Roese
  • [U-Boot] [PATCH 13/14] usb: xhci: Set 'Error Count' to 0 for isoch endpoints   Bin Meng
    • [U-Boot] [PATCH 13/14] usb: xhci: Set 'Error Count' to 0 for isoch endpoints   Stefan Roese
  • [U-Boot] [PATCH 14/14] usb: xhci: Set 'Average TRB Length' to 8 for control endpoints   Bin Meng
    • [U-Boot] [PATCH 14/14] usb: xhci: Set 'Average TRB Length' to 8 for control endpoints   Stefan Roese
  • [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support   Marek Vasut
    • [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support   Stefan Roese
      • [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support   Marek Vasut
      • [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support   Stefan Roese
      • [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
      • [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support   Stefan Roese
      • [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support   Bin Meng
• [U-Boot] [PATCH 1/2] arm: mvebu: fix boot from UART on ClearFog Base   Stefan Roese
  • [U-Boot] [PATCH 1/2] arm: mvebu: fix boot from UART on ClearFog Base   Baruch Siach
    • [U-Boot] [PATCH 1/2] arm: mvebu: fix boot from UART on ClearFog Base   Stefan Roese
      • [U-Boot] [PATCH 1/2] arm: mvebu: fix boot from UART on ClearFog Base   Baruch Siach
• [U-Boot] [PATCH 1/3] test/py: Document required tools/packages   Stephen Warren
  • [U-Boot] [PATCH 2/3] test/py: provide more information about test skip reason   Stephen Warren
    • [U-Boot] [U-Boot, 2/3] test/py: provide more information about test skip reason   Tom Rini
  • [U-Boot] [PATCH 3/3] test/py: add skip marker for reliance on tools   Stephen Warren
    • [U-Boot] [U-Boot, 3/3] test/py: add skip marker for reliance on tools   Tom Rini
  • [U-Boot] [U-Boot, 1/3] test/py: Document required tools/packages   Tom Rini
• [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI   Rob Clark
  • [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI   Rob Clark
    • [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI   Alexander Graf
  • [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI   Alexander Graf
  • [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI   Simon Glass
• [U-Boot] [PATCH] test/py: fix anchors in HTML status report   Stephen Warren
  • [U-Boot] test/py: fix anchors in HTML status report   Tom Rini
• [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Philipp Tomsich
  • [U-Boot] [PATCH v2 1/5] arm: make save_boot_params_ret prototype visible for AArch64   Philipp Tomsich
  • [U-Boot] [PATCH v2 2/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Philipp Tomsich
  • [U-Boot] [PATCH v2 3/5] rockchip: back-to-bootrom: rk3188: chain from SPL via TPL to the BROM   Philipp Tomsich
    • [U-Boot] [PATCH v2 3/5] rockchip: back-to-bootrom: rk3188: chain from SPL via TPL to the BROM   Simon Glass
  • [U-Boot] [PATCH v2 4/5] rockchip: back-to-bootrom: allow passing a cmd to the bootrom   Philipp Tomsich
    • [U-Boot] [PATCH v2 4/5] rockchip: back-to-bootrom: allow passing a cmd to the bootrom   Simon Glass
  • [U-Boot] [PATCH v2 5/5] rockchip: back-to-bootrom: do not compile bootrom.o in thumb mode   Philipp Tomsich
  • [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Andy Yan
    • [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Andy Yan
      • [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
      • [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Heiko Stübner
      • [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
      • [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
      • [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Heiko Stuebner
      • [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
      • [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Andy Yan
• [U-Boot] [U-Boot, RFC, 2/4] rockchip: timer: update for 32/64bit-aware OF_PLATDATA   Philipp Tomsich
• [U-Boot] [U-Boot, 4/4] rockchip: dts: rk3368: reduce the number of nodes seen in TPL   Philipp Tomsich
• [U-Boot] [U-Boot, RFC, 3/4] rockchip: rk3368: adjust DMC driver for 32/64bit-aware OF_PLATDATA   Philipp Tomsich
• [U-Boot] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
  • [U-Boot] Please pull u-boot-rockchip/master   Tom Rini
• [U-Boot] [PATCH 1/1] efi_loader: avoid obscure constants in efi_runtime.c   Heinrich Schuchardt
• [U-Boot] tftp reliability   Ran Shalit
  • [U-Boot] tftp reliability   Robert Moskowitz
  • [U-Boot] tftp reliability   Chris Packham
    • [U-Boot] tftp reliability   Ran Shalit
• [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type   André Przywara
• [U-Boot] [PATCH] sunxi: gpio: add missing compatible strings   André Przywara
• [U-Boot] [PATCH v2 1/1] test/py: provide example scripts for integrating qemu   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 1/1] test/py: provide example scripts for integrating qemu   Simon Glass
• [U-Boot] [PATCH v2] xyz-modem: Fix timeout loop waiting with WATCHDOG   Lokesh Vutla
• [U-Boot] [PATCH v2] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
  • [U-Boot] [PATCH v2] cmd: usb: add blk devices to ignore list in tree graph   Bin Meng
  • [U-Boot] [PATCH v2] cmd: usb: add blk devices to ignore list in tree graph   Stefan Roese
    • [U-Boot] [PATCH v2] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
• [U-Boot] [PATCH] spl: spl_mmc: add __maybe_unused to mmc_load_image_raw_sector()   Seung-Woo Kim
  • [U-Boot] [PATCH] spl: spl_mmc: add __maybe_unused to mmc_load_image_raw_sector()   Jaehoon Chung
• [U-Boot] [RESEND PATCH 1/5] dm: video: bridge: add operation to read EDID   Vasily Khoruzhick
  • [U-Boot] [RESEND PATCH 2/5] video: anx9804: split out registers definitions into a separate header   Vasily Khoruzhick
  • [U-Boot] [RESEND PATCH 3/5] video: add anx6345 DM driver   Vasily Khoruzhick
  • [U-Boot] [RESEND PATCH 4/5] sunxi: video: split out PLL code   Vasily Khoruzhick
  • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Vasily Khoruzhick
    • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Maxime Ripard
      • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Vasily Khoruzhick
      • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Jernej Škrabec
      • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Icenowy Zheng
      • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Vasily Khoruzhick
      • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Maxime Ripard
      • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   icenowy at aosc.io
      • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Vasily Khoruzhick
      • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Maxime Ripard
      • [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver   Vasily Khoruzhick
• [U-Boot] [RESEND PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3   Vasily Khoruzhick
  • [U-Boot] [RESEND PATCH 3/3] dts: sunxi: add PWM node for sun50i   Vasily Khoruzhick
    • [U-Boot] [RESEND PATCH 3/3] dts: sunxi: add PWM node for sun50i   Maxime Ripard
    • [U-Boot] [RESEND PATCH 3/3] dts: sunxi: add PWM node for sun50i   Andre Przywara
  • [U-Boot] [RESEND PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3   Andre Przywara
    • [U-Boot] [RESEND PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3   Icenowy Zheng
      • [U-Boot] [RESEND PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3   Andre Przywara
• [U-Boot] [RESEND PATCH 2/3] video: pwm_backlight: make regulator optional   Vasily Khoruzhick
• [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
  • [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph   Bin Meng
    • [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
      • [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph   Bin Meng
      • [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
      • [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph   Bin Meng
      • [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
• [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL   Stefano Babic
  • [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL   Anatolij Gustschin
  • [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL   Fabio Estevam
    • [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL   Anatolij Gustschin
      • [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL   Stefano Babic
      • [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL   Max Krummenacher
      • [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL   Anatolij Gustschin
      • [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL   Fabio Estevam
      • [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL   Anatolij Gustschin
• [U-Boot] [PATCH 1/1] kconfiglib: update with 'imply' support   Ulf Magnusson
• [U-Boot] [PATCH 00/14] Enable Stratix10 SoC support   chin.liang.see at intel.com
  • [U-Boot] [PATCH 01/14] arm: socfpga: stratix10: Add base address map for Statix10 SoC   chin.liang.see at intel.com
    • [U-Boot] [PATCH 01/14] arm: socfpga: stratix10: Add base address map for Statix10 SoC   Marek Vasut
      • [U-Boot] [PATCH 01/14] arm: socfpga: stratix10: Add base address map for Statix10 SoC   See, Chin Liang
  • [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC   chin.liang.see at intel.com
    • [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC   Dinh Nguyen
      • [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC   See, Chin Liang
    • [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC   Dinh Nguyen
      • [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC   See, Chin Liang
  • [U-Boot] [PATCH 03/14] arm: socfpga: stratix10: Add Clock Manager driver for Stratix10 SoC   chin.liang.see at intel.com
    • [U-Boot] [PATCH 03/14] arm: socfpga: stratix10: Add Clock Manager driver for Stratix10 SoC   Dinh Nguyen
      • [U-Boot] [PATCH 03/14] arm: socfpga: stratix10: Add Clock Manager driver for Stratix10 SoC   See, Chin Liang
  • [U-Boot] [PATCH 04/14] arm: socfpga: stratix10: Add Reset Manager driver for Stratix10 SoC   chin.liang.see at intel.com
    • [U-Boot] [PATCH 04/14] arm: socfpga: stratix10: Add Reset Manager driver for Stratix10 SoC   Dinh Nguyen
      • [U-Boot] [PATCH 04/14] arm: socfpga: stratix10: Add Reset Manager driver for Stratix10 SoC   See, Chin Liang
  • [U-Boot] [PATCH 05/14] arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC   chin.liang.see at intel.com
  • [U-Boot] [PATCH 06/14] arm: socfpga: stratix10: Add misc support for Stratix10 SoC   chin.liang.see at intel.com
    • [U-Boot] [PATCH 06/14] arm: socfpga: stratix10: Add misc support for Stratix10 SoC   Dinh Nguyen
      • [U-Boot] [PATCH 06/14] arm: socfpga: stratix10: Add misc support for Stratix10 SoC   See, Chin Liang
  • [U-Boot] [PATCH 07/14] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   chin.liang.see at intel.com
  • [U-Boot] [PATCH 08/14] arm: socfpga: stratix10: Add MMU support for Stratix10 SoC   chin.liang.see at intel.com
  • [U-Boot] [PATCH 09/14] arm: socfpga: Restructure the SPL file   chin.liang.see at intel.com
  • [U-Boot] [PATCH 10/14] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC   chin.liang.see at intel.com
  • [U-Boot] [PATCH 11/14] arm: socfpga: stratix10: Add timer support for Stratix10 SoC   chin.liang.see at intel.com
  • [U-Boot] [PATCH 12/14] ddr: altera: stratix10: Add DDR support for Stratix10 SoC   chin.liang.see at intel.com
  • [U-Boot] [PATCH 13/14] board: altera: stratix10: Add socdk board support for Stratix10 SoC   chin.liang.see at intel.com
  • [U-Boot] [PATCH 14/14] arm: socfpga: stratix10: Enable Stratix10 SoC build   chin.liang.see at intel.com
• [U-Boot] [PATCH v2 0/1] Update Kconfiglib with 'imply' support   Ulf Magnusson
  • [U-Boot] [PATCH v2 1/1] kconfiglib: update with 'imply' support   Ulf Magnusson
    • [U-Boot] [U-Boot, v2, 1/1] kconfiglib: update with 'imply' support   Tom Rini
• [U-Boot] [U-Boot,v2,00/14] Add rockchip SARADC support   David Wu
  • [U-Boot] [U-Boot,v2,01/14] adc: Add driver for Rockchip SARADC   David Wu
  • [U-Boot] [U-Boot, v2, 02/14] configs: rockchip: Enable the ROCKCHIP_SARADC config   David Wu
  • [U-Boot] [U-Boot, v2, 03/14] clk: rockchip: Add rv1108 SARADC clock support   David Wu
  • [U-Boot] [U-Boot, v2, 04/14] clk: rockchip: Add SARADC clock support for rk3288   David Wu
  • [U-Boot] [U-Boot, v2, 06/14] clk: rockchip: Add rk3368 SARADC clock support   David Wu
  • [U-Boot] [U-Boot, v2, 08/14] arm: dts: rv1108: Add SARADC node at dtsi level   David Wu
  • [U-Boot] [U-Boot,v2,09/14] arm: dts: Enable SARADC for rv1108-evb   David Wu
  • [U-Boot] [U-Boot, v2, 10/14] arm: dts: Enable SARADC for rk3288-popmetal   David Wu
  • [U-Boot] [U-Boot,v2,11/14] arm: dts: Enable SARADC for rk3328-evb   David Wu
  • [U-Boot] [U-Boot,v2,14/14] arm: dts: Enable SARADC for rk3399-evb   David Wu
  • [U-Boot] [U-Boot,v2,00/14] Add rockchip SARADC support   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, v2, 05/14] clk: rockchip: Add rk3328 SARADC clock support   David Wu
• [U-Boot] [U-Boot, v2, 07/14] clk: rockchip: Add rk3399 SARADC clock support   David Wu
• [U-Boot] [U-Boot, v2, 12/14] arm: dts: Enable SARADC for rk3368-px5-evb   David Wu
• [U-Boot] [U-Boot, v2, 13/14] arm: dts: Enable SARADC for rk3368-sheep   David Wu
• [U-Boot] [PATCH] dwc: ep0: Allocate and flush dwc->ep0_trb in a cache aligned manner   Faiz Abbas
• [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned   Faiz Abbas
  • [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned   Bin Meng
    • [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned   Faiz Abbas
  • [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned   Simon Glass
    • [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned   sjg at google.com
• [U-Boot] Disable axp209 auto start   Florian HESLOUIN
  • [U-Boot] Disable axp209 auto start   Chen-Yu Tsai
• [U-Boot] [PATCH] rockchip: pinctrl: rk3368: add pinctrl for SDMMC0   Philipp Tomsich
  • [U-Boot] [PATCH] rockchip: pinctrl: rk3368: add pinctrl for SDMMC0   Simon Glass
  • [U-Boot] rockchip: pinctrl: rk3368: add pinctrl for SDMMC0   Philipp Tomsich
• [U-Boot] [PATCH 1/1] scripts/checkpatch: add missing spelling.txt   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] scripts/checkpatch: add missing spelling.txt   Dan Murphy
  • [U-Boot] [U-Boot, 1/1] scripts/checkpatch: add missing spelling.txt   Tom Rini
• [U-Boot] [PATCH v2 1/1] x86: provide CONFIG_BUILD_ROM   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 1/1] x86: provide CONFIG_BUILD_ROM   Simon Glass
• [U-Boot] [PATCH] mx53loco: Let CONFIG_DISPLAY_CPUINFO be selected   Fabio Estevam
• [U-Boot] [PATCH 0/6] i.MX6Q: Add SPL_OF_CONTROL support   Jagan Teki
  • [U-Boot] [PATCH 1/6] i.MX6: engicam: Fix MAINTAINERS/README   Jagan Teki
  • [U-Boot] [PATCH 2/6] imx6ul: geam6ul/isiot: Fix to MMC devices   Jagan Teki
  • [U-Boot] [PATCH 3/6] i.MX6: engicam: Move set_fdt_file to common   Jagan Teki
  • [U-Boot] [PATCH 4/6] i.MX6Q: icorem6: Move spl load fit to common/spl   Jagan Teki
  • [U-Boot] [PATCH 5/6] i.MX6Q: icore: Add SPL_OF_CONTROL support   Jagan Teki
  • [U-Boot] [PATCH 6/6] i.MX6Q: icore: Add imx6q board for icore/icore_rqs   Jagan Teki
• [U-Boot] DDR training code for Armada 38x   Chris Packham
  • [U-Boot] DDR training code for Armada 38x   Stefan Roese
    • [U-Boot] DDR training code for Armada 38x   Chris Packham
      • [U-Boot] DDR training code for Armada 38x   Chris Packham
      • [U-Boot] DDR training code for Armada 38x   Stefan Roese
• [U-Boot] [PATCH v3 1/1] test/py: provide example scripts for integrating qemu   Heinrich Schuchardt
  • [U-Boot] [PATCH v3 1/1] test/py: provide example scripts for integrating qemu   Stephen Warren
    • [U-Boot] [PATCH v3 1/1] test/py: provide example scripts for integrating qemu   Heinrich Schuchardt
      • [U-Boot] [PATCH v3 1/1] test/py: provide example scripts for integrating qemu   Stephen Warren
• [U-Boot] [PATCH v2 0/6] Board for QEMU's '-machine virt' on ARM   Tuomas Tynkkynen
  • [U-Boot] [PATCH v2 1/6] pci: Add helper for implementing memory-mapped config space accesses   Tuomas Tynkkynen
    • [U-Boot] [PATCH v2 1/6] pci: Add helper for implementing memory-mapped config space accesses   Bin Meng
  • [U-Boot] [PATCH v2 2/6] pci: xilinx: Use pci_generic_mmap_{read, write}_config()   Tuomas Tynkkynen
    • [U-Boot] [PATCH v2 2/6] pci: xilinx: Use pci_generic_mmap_{read, write}_config()   Bin Meng
  • [U-Boot] [PATCH v2 3/6] pci: layerscape: Use pci_generic_mmap_{read, write}_config   Tuomas Tynkkynen
    • [U-Boot] [PATCH v2 3/6] pci: layerscape: Use pci_generic_mmap_{read, write}_config   Bin Meng
  • [U-Boot] [PATCH v2 4/6] PCI: Add driver for a 'pci-host-ecam-generic' host controller   Tuomas Tynkkynen
    • [U-Boot] [PATCH v2 4/6] PCI: Add driver for a 'pci-host-ecam-generic' host controller   Bin Meng
  • [U-Boot] [PATCH v2 5/6] ARM: Add a new arch + board for QEMU's 'virt' machine   Tuomas Tynkkynen
    • [U-Boot] [PATCH v2 5/6] ARM: Add a new arch + board for QEMU's 'virt' machine   Bin Meng
      • [U-Boot] [PATCH v2 5/6] ARM: Add a new arch + board for QEMU's 'virt' machine   Tuomas Tynkkynen
      • [U-Boot] [PATCH v2 5/6] ARM: Add a new arch + board for QEMU's 'virt' machine   Peter Robinson
  • [U-Boot] [PATCH v2 6/6] travis.yml: Add job for running test.py in qemu_arm   Tuomas Tynkkynen
    • [U-Boot] [PATCH v2 6/6] travis.yml: Add job for running test.py in qemu_arm   Bin Meng
• [U-Boot] Kconfiglib update and tools/moveconfig.py   Simon Glass
• [U-Boot] [PATCH 1/2] arm: dts: am3517_evm: Sync DTS files with Linux 4.13-RC5   Adam Ford
  • [U-Boot] [PATCH 1/2] arm: dts: am3517_evm: Sync DTS files with Linux 4.13-RC5   Derald D. Woods
  • [U-Boot] [U-Boot, 1/2] arm: dts: am3517_evm: Sync DTS files with Linux 4.13-RC5   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: omap3: am3517-evm: Add device tree and DM support   Adam Ford
  • [U-Boot] [PATCH 2/2] ARM: omap3: am3517-evm: Add device tree and DM support   Derald D. Woods
  • [U-Boot] [U-Boot, 2/2] ARM: omap3: am3517-evm: Add device tree and DM support   Tom Rini
• [U-Boot] Sandbox 'usb start' causes segment fault   Bin Meng
  • [U-Boot] Sandbox 'usb start' causes segment fault   Simon Glass
    • [U-Boot] Sandbox 'usb start' causes segment fault   Bin Meng
      • [U-Boot] Sandbox 'usb start' causes segment fault   Simon Glass
• [U-Boot] [PATCH v3 00/14] Add rockchip SARADC support   David Wu
  • [U-Boot] [PATCH v3 01/14] dm: adc: Add driver for Rockchip SARADC   David Wu
    • [U-Boot] [U-Boot, v3, 01/14] dm: adc: Add driver for Rockchip SARADC   Philipp Tomsich
  • [U-Boot] [PATCH v3 03/14] rockchip: clk: Add rv1108 SARADC clock support   David Wu
    • [U-Boot] [U-Boot, v3, 03/14] rockchip: clk: Add rv1108 SARADC clock support   Philipp Tomsich
  • [U-Boot] [PATCH v3 04/14] rockchip: clk: Add SARADC clock support for rk3288   David Wu
    • [U-Boot] [U-Boot, v3, 04/14] rockchip: clk: Add SARADC clock support for rk3288   Philipp Tomsich
  • [U-Boot] [PATCH v3 05/14] rockchip: clk: Add rk3328 SARADC clock support   David Wu
    • [U-Boot] [U-Boot, v3, 05/14] rockchip: clk: Add rk3328 SARADC clock support   Philipp Tomsich
  • [U-Boot] [PATCH v3 06/14] rockchip: clk: Add rk3368 SARADC clock support   David Wu
    • [U-Boot] [U-Boot, v3, 06/14] rockchip: clk: Add rk3368 SARADC clock support   Philipp Tomsich
  • [U-Boot] [PATCH v3 07/14] rockchip: clk: Add rk3399 SARADC clock support   David Wu
    • [U-Boot] [U-Boot, v3, 07/14] rockchip: clk: Add rk3399 SARADC clock support   Philipp Tomsich
  • [U-Boot] [PATCH v3 08/14] rockchip: dts: rv1108: Add SARADC node at dtsi level   David Wu
    • [U-Boot] [U-Boot, v3, 08/14] rockchip: dts: rv1108: Add SARADC node at dtsi level   Philipp Tomsich
  • [U-Boot] [PATCH v3 09/14] rockchip: dts: Enable SARADC for rv1108-evb   David Wu
    • [U-Boot] [U-Boot, v3, 09/14] rockchip: dts: Enable SARADC for rv1108-evb   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 09/14] rockchip: dts: Enable SARADC for rv1108-evb   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 09/14] rockchip: dts: Enable SARADC for rv1108-evb   Philipp Tomsich
  • [U-Boot] [PATCH v3 11/14] rockchip: dts: Enable SARADC for rk3328-evb   David Wu
    • [U-Boot] [U-Boot, v3, 11/14] rockchip: dts: Enable SARADC for rk3328-evb   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 11/14] rockchip: dts: Enable SARADC for rk3328-evb   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 11/14] rockchip: dts: Enable SARADC for rk3328-evb   Philipp Tomsich
  • [U-Boot] [PATCH v3 12/14] rockchip: dts: Enable SARADC for rk3368-px5-evb   David Wu
    • [U-Boot] [U-Boot, v3, 12/14] rockchip: dts: Enable SARADC for rk3368-px5-evb   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 12/14] rockchip: dts: Enable SARADC for rk3368-px5-evb   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 12/14] rockchip: dts: Enable SARADC for rk3368-px5-evb   Philipp Tomsich
  • [U-Boot] [PATCH v3 14/14] rockchip: dts: Enable SARADC for rk3399-evb   David Wu
    • [U-Boot] [U-Boot, v3, 14/14] rockchip: dts: Enable SARADC for rk3399-evb   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 14/14] rockchip: dts: Enable SARADC for rk3399-evb   Philipp Tomsich
    • [U-Boot] [U-Boot, v3, 14/14] rockchip: dts: Enable SARADC for rk3399-evb   Philipp Tomsich
• [U-Boot] [PATCH v3 02/14] rockchip: configs: Enable the ROCKCHIP_SARADC config   David Wu
  • [U-Boot] [U-Boot, v3, 02/14] rockchip: configs: Enable the ROCKCHIP_SARADC config   Philipp Tomsich
• [U-Boot] [PATCH v3 10/14] rockchip: dts: Enable SARADC for rk3288-popmetal   David Wu
  • [U-Boot] [U-Boot, v3, 10/14] rockchip: dts: Enable SARADC for rk3288-popmetal   Philipp Tomsich
  • [U-Boot] [U-Boot, v3, 10/14] rockchip: dts: Enable SARADC for rk3288-popmetal   Philipp Tomsich
  • [U-Boot] [U-Boot, v3, 10/14] rockchip: dts: Enable SARADC for rk3288-popmetal   Philipp Tomsich
• [U-Boot] [PATCH v3 13/14] rockchip: dts: Enable SARADC for rk3368-sheep   David Wu
  • [U-Boot] [U-Boot, v3, 13/14] rockchip: dts: Enable SARADC for rk3368-sheep   Philipp Tomsich
  • [U-Boot] [U-Boot, v3, 13/14] rockchip: dts: Enable SARADC for rk3368-sheep   Philipp Tomsich
  • [U-Boot] [U-Boot, v3, 13/14] rockchip: dts: Enable SARADC for rk3368-sheep   Philipp Tomsich
• [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest   Michal Simek
  • [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest   Stephen Warren
    • [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest   Michal Simek
      • [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest   Stephen Warren
      • [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest   Michal Simek
• [U-Boot] [PATCH] dm: ofnode: query correct property in livetree ofnode_get_addr_size   Klaus Goger
  • [U-Boot] [PATCH] dm: ofnode: query correct property in livetree ofnode_get_addr_size   Simon Glass
    • [U-Boot] [PATCH] dm: ofnode: query correct property in livetree ofnode_get_addr_size   sjg at google.com
• [U-Boot] [PATCH] rockchip: imply ADC and SARADC_ROCKCHIP on supported SoCs   Philipp Tomsich
  • [U-Boot] [PATCH] rockchip: imply ADC and SARADC_ROCKCHIP on supported SoCs   David.Wu
    • [U-Boot] [PATCH] rockchip: imply ADC and SARADC_ROCKCHIP on supported SoCs   Dr. Philipp Tomsich
      • [U-Boot] [PATCH] rockchip: imply ADC and SARADC_ROCKCHIP on supported SoCs   David.Wu
• [U-Boot] [PATCH v2] imx: imx7d: remove CamelCase from ENET_xMHz macros   Stefano Babic
• [U-Boot] [PATCH] pico-imx7d: Add "how to boot with NXP 4.1 Kernel"   Stefano Babic
• [U-Boot] [PATCH] imx6: drop duplicated bss memset and board_init_r() call   Stefano Babic
• [U-Boot] [PATCH] detect and setup solidrun hummingboard2   Stefano Babic
• [U-Boot] [PATCH] board: ge: bx50v3: set eth0 MAC address   Stefano Babic
• [U-Boot] [PATCH] README.imx6: Prefer loading SPL via the new SDP mechanism   Fabio Estevam
• [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support   Icenowy Zheng
  • [U-Boot] [PATCH v5 4/4] sunxi: setup simplefb for Allwinner DE2   Icenowy Zheng
• [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI   Icenowy Zheng
  • [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI   Maxime Ripard
    • [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI   Icenowy Zheng
      • [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI   Maxime Ripard
      • [U-Boot] [linux-sunxi] Re: [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI   icenowy at aosc.io
      • [U-Boot] [linux-sunxi] Re: [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI   Maxime Ripard
      • [U-Boot] [linux-sunxi] Re: [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI   icenowy at aosc.io
• [U-Boot] [PATCH v5 2/4] video: sunxi: extract simplefb match code to a new file   Icenowy Zheng
• [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT   Icenowy Zheng
  • [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT   Maxime Ripard
• [U-Boot] cmd/bootefi.c:285:3: error: ‘loaded_image_info’ undeclared   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_selftest: enable CONFIG_CMD_BOOTEFI_SELFTEST   Heinrich Schuchardt
    • [U-Boot] [PATCH 1/1] efi_selftest: enable CONFIG_CMD_BOOTEFI_SELFTEST   Simon Glass
  • [U-Boot] [PATCH 1/1] efi_loader: reenable selftest   Heinrich Schuchardt
    • [U-Boot] [PATCH 1/1] efi_loader: reenable selftest   Rob Clark
      • [U-Boot] [PATCH v2 1/1] efi_loader: reenable selftest   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 1/1] efi_loader: reenable selftest   Rob Clark
      • [U-Boot] [PATCH v2 1/1] efi_loader: reenable selftest   Simon Glass
  • [U-Boot] cmd/bootefi.c:285:3: error: ‘loaded_image_info’ undeclared   Rob Clark
• [U-Boot] [PATCH v2] defconfigs: Add a config for AM335x High Security EVM with UART Boot support   Andrew F. Davis
  • [U-Boot] [U-Boot, v2] defconfigs: Add a config for AM335x High Security EVM with UART Boot support   Tom Rini
• [U-Boot] [PATCH] arm: am33xx: security: adds auth support for encrypted images   Andrew F. Davis
  • [U-Boot] arm: am33xx: security: adds auth support for encrypted images   Tom Rini
• [U-Boot] [PATCH] configs: am43xx_evm: Avoid relocation onto firewall at the end of DRAM   Andrew F. Davis
  • [U-Boot] configs: am43xx_evm: Avoid relocation onto firewall at the end of DRAM   Tom Rini
• [U-Boot] [PATCH] defconfigs: Add a config for AM43xx High Security EVM with QSPI Boot support   Andrew F. Davis
  • [U-Boot] defconfigs: Add a config for AM43xx High Security EVM with QSPI Boot support   Tom Rini
• [U-Boot] [PATCH] configs: k2g_evm: Make findfdt command populate fdtfile variable   Andrew F. Davis
  • [U-Boot] configs: k2g_evm: Make findfdt command populate fdtfile variable   Tom Rini
• [U-Boot] [PATCH] efi_loader: fix efi_exit   Rob Clark
  • [U-Boot] efi_loader: fix efi_exit   Alexander Graf
• [U-Boot] [PATCH 1/2] wandboard: Add support for the latest revd1 revision   Fabio Estevam
  • [U-Boot] [PATCH 2/2] wandboard: Add support for the MX6QP variant   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] wandboard: Add support for the latest revd1 revision   Fabio Estevam
  • [U-Boot] [PATCH v2 2/2] wandboard: Add support for the MX6QP variant   Fabio Estevam
    • [U-Boot] [PATCH v2 2/2] wandboard: Add support for the MX6QP variant   Fabio Estevam
      • [U-Boot] [PATCH v2 2/2] wandboard: Add support for the MX6QP variant   Stefano Babic
• [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command   Lokesh Vutla
  • [U-Boot] configs: keystone2: env: Fix burn_uboot_spi command   Tom Rini
• [U-Boot] [PATCH v4] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
  • [U-Boot] [PATCH v4] cmd: usb: add blk devices to ignore list in tree graph   Bin Meng
    • [U-Boot] [PATCH v4] cmd: usb: add blk devices to ignore list in tree graph   Suneel Garapati
• [U-Boot] [PATCH V4 01/12] scripts: spl: fix typo   Peng Fan
  • [U-Boot] [PATCH V4 01/12] scripts: spl: fix typo   Stefano Babic
  • [U-Boot] [PATCH V4 01/12] scripts: spl: fix typo   Stefano Babic
• [U-Boot] [PATCH] nds32: Fix io.h warning message about readb   Andes
• [U-Boot] [PATCH] ARM: dts: OMAP5+: Enable all gpios in SPL   Lokesh Vutla
  • [U-Boot] ARM: dts: OMAP5+: Enable all gpios in SPL   Tom Rini
  • [U-Boot] ARM: dts: OMAP5+: Enable all gpios in SPL   Tom Rini
• [U-Boot] [PATCH v5] cmd: usb: add blk, emulation devices to ignore list as needed   Suneel Garapati
  • [U-Boot] [PATCH v5] cmd: usb: add blk, emulation devices to ignore list as needed   Simon Glass
• [U-Boot] [PATCH v2 1/2] ls1088ardb: Enable USB command RDB qspi-boot   Ran Wang
  • [U-Boot] [PATCH v2 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot   Ran Wang
  • [U-Boot] [PATCH v2 1/2] ls1088ardb: Enable USB command RDB qspi-boot   Bin Meng
    • [U-Boot] [PATCH v2 1/2] ls1088ardb: Enable USB command RDB qspi-boot   Ran Wang
• [U-Boot] [PATCH v3 0/3] sunxi: add PWM driver for H3 and A64   Vasily Khoruzhick
  • [U-Boot] [PATCH v2 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3   Vasily Khoruzhick
    • [U-Boot] [PATCH v2 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3   Andre Przywara
  • [U-Boot] [PATCH v2 2/3] video: pwm_backlight: make regulator optional   Vasily Khoruzhick
  • [U-Boot] [PATCH v2 3/3] dts: sunxi: add PWM node for sun50i   Vasily Khoruzhick
    • [U-Boot] [PATCH v2 3/3] dts: sunxi: add PWM node for sun50i   Maxime Ripard
      • [U-Boot] [PATCH v2 3/3] dts: sunxi: add PWM node for sun50i   Vasily Khoruzhick
      • [U-Boot] [PATCH v2 3/3] dts: sunxi: add PWM node for sun50i   Andre Przywara
  • [U-Boot] [PATCH v3 0/3] sunxi: add PWM driver for H3 and A64   Vasily Khoruzhick
    • [U-Boot] [PATCH v3 0/3] sunxi: add PWM driver for H3 and A64   Andre Przywara
• [U-Boot] [PATCH v2 0/5] sunxi: video: add DE2 LCD and ANX6345 drivers   Vasily Khoruzhick
  • [U-Boot] [PATCH v2 1/5] dm: video: bridge: add operation to read EDID   Vasily Khoruzhick
  • [U-Boot] [PATCH v2 2/5] video: anx9804: split out registers definitions into a separate header   Vasily Khoruzhick
  • [U-Boot] [PATCH v2 3/5] video: add anx6345 DM driver   Vasily Khoruzhick
  • [U-Boot] [PATCH v2 4/5] sunxi: video: split out PLL configuration code   Vasily Khoruzhick
  • [U-Boot] [PATCH v2 5/5] sunxi: video: add LCD support to DE2 driver   Vasily Khoruzhick
• [U-Boot] [PATCH 1/1] dm: clk: add missing .priv_auto_alloc_size() for stm32f7   patrice.chotard at st.com
  • [U-Boot] [PATCH 1/1] dm: clk: add missing .priv_auto_alloc_size() for stm32f7   Simon Glass
  • [U-Boot] [U-Boot, 1/1] dm: clk: add missing .priv_auto_alloc_size() for stm32f7   Tom Rini
• [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Philipp Tomsich
  • [U-Boot] [PATCH v3 3/6] arm: provide a PCS-compliant setjmp implementation   Philipp Tomsich
    • [U-Boot] [PATCH v3 3/6] arm: provide a PCS-compliant setjmp implementation   Alexander Graf
  • [U-Boot] [PATCH v3 4/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Philipp Tomsich
  • [U-Boot] [PATCH v3 5/6] rockchip: back-to-bootrom: rk3188: chain from SPL via TPL to the BROM   Philipp Tomsich
  • [U-Boot] [PATCH v3 6/6] rockchip: back-to-bootrom: allow passing a cmd to the bootrom   Philipp Tomsich
  • [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Heiko Stuebner
    • [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Heiko Stuebner
      • [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
      • [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
      • [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Heiko Stübner
      • [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Andy Yan
      • [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
    • [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Dr. Philipp Tomsich
• [U-Boot] [PATCH v3 1/6] arm: make save_boot_params_ret prototype visible for AArch64   Philipp Tomsich
• [U-Boot] [PATCH v3 2/6] arm: mark save_boot_params_ret as a function   Philipp Tomsich
• [U-Boot] [PATCH] arm: dts: omap3: sync DTS with Linux 4.14-rc1   karthik at techveda.org
  • [U-Boot] arm: dts: omap3: sync DTS with Linux 4.14-rc1   Tom Rini
• [U-Boot] setjmp/longjmp prototype in U-Boot   Dr. Philipp Tomsich
  • [U-Boot] setjmp/longjmp prototype in U-Boot   Alexander Graf
    • [U-Boot] setjmp/longjmp prototype in U-Boot   Simon Glass
• [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part   Stefan Roese
    • [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part   Heinrich Schuchardt
      • [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part   Stefan Roese
      • [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part   Simon Glass
      • [U-Boot] [U-Boot, 1/1] GPT: incomplete initialization in allocate_disk_part   Tom Rini
• [U-Boot] [PATCH 1/1] sandbox: avoid memory leak in os_dirent_ls   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] sandbox: avoid memory leak in os_dirent_ls   Simon Glass
    • [U-Boot] [PATCH 1/1] sandbox: avoid memory leak in os_dirent_ls   sjg at google.com
• [U-Boot] drivers/core/read.c:64:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]   Heinrich Schuchardt
  • [U-Boot] drivers/core/read.c:64:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]   Simon Glass
    • [U-Boot] drivers/core/read.c:64:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]   Simon Glass
• [U-Boot] [PATCH v2 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC   Stefan Mavrodiev
  • [U-Boot] [PATCH v2 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC   Maxime Ripard
• [U-Boot] u-boot Boot issue about rk3188   Andy Yan
  • [U-Boot] u-boot Boot issue about rk3188   Heiko Stübner
    • [U-Boot] u-boot Boot issue about rk3188   Andy Yan
      • [U-Boot] u-boot Boot issue about rk3188   Andy Yan
      • [U-Boot] u-boot Boot issue about rk3188   Heiko Stuebner
      • [U-Boot] u-boot Boot issue about rk3188   Andy Yan
      • [U-Boot] u-boot Boot issue about rk3188   Heiko Stübner
      • [U-Boot] u-boot Boot issue about rk3188   Andy Yan
      • [U-Boot] u-boot Boot issue about rk3188   Heiko Stübner
      • [U-Boot] u-boot Boot issue about rk3188   Paweł Jarosz
      • [U-Boot] u-boot Boot issue about rk3188   Andy Yan
      • [U-Boot] u-boot Boot issue about rk3188   Paweł Jarosz
      • [U-Boot] u-boot Boot issue about rk3188   Andy Yan
      • [U-Boot] u-boot Boot issue about rk3188   Paweł Jarosz
• [U-Boot] [PATCH 0/6] Add gmac support for rk3399-evb and rv1108-evb   David Wu
  • [U-Boot] [PATCH 1/6] rockchip: clk: Add mac clock set for rk3399   David Wu
    • [U-Boot] [U-Boot, 1/6] rockchip: clk: Add mac clock set for rk3399   Philipp Tomsich
  • [U-Boot] [PATCH 2/6] rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality   David Wu
    • [U-Boot] [U-Boot, 2/6] rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality   Philipp Tomsich
  • [U-Boot] [PATCH 3/6] rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb   David Wu
    • [U-Boot] [U-Boot, 3/6] rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb   Philipp Tomsich
  • [U-Boot] [PATCH 4/6] net: gmac_rockchip: Define the gmac grf register struct at gmac_rockchip.c   David Wu
    • [U-Boot] [U-Boot, 4/6] net: gmac_rockchip: Define the gmac grf register struct at gmac_rockchip.c   Philipp Tomsich
    • [U-Boot] [PATCH 4/6] net: gmac_rockchip: Define the gmac grf register struct at gmac_rockchip.c   Joe Hershberger
  • [U-Boot] [PATCH 5/6] net: gmac_rockchip: Use the proerty of "clock_in_out" to set mac clock   David Wu
    • [U-Boot] [U-Boot, 5/6] net: gmac_rockchip: Use the proerty of "clock_in_out" to set mac clock   Philipp Tomsich
  • [U-Boot] [PATCH 6/6] rockchip: gmac_rockchip: Add gmac support for rv1108   David Wu
    • [U-Boot] [U-Boot, 6/6] rockchip: gmac_rockchip: Add gmac support for rv1108   Philipp Tomsich
• [U-Boot] [PATCH v2 00/26] mmc: Add support for HS200 and UHS modes   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 01/26] mmc: dm: get the IO-line and main voltage regulators from the dts   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 02/26] mmc: split mmc_startup()   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 03/26] mmc: move the MMC startup for version above v4.0 in a separate function   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 04/26] mmc: make ext_csd part of struct mmc   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 05/26] mmc: add a function to read and test the ext csd (mmc >= 4)   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 06/26] mmc: introduce mmc modes   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 07/26] mmc: Add a function to dump the mmc capabilities   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 07/26] mmc: Add a function to dump the mmc capabilities   Jaehoon Chung
  • [U-Boot] [PATCH v2 08/26] mmc: use mmc modes to select the correct bus speed   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 09/26] cmd: mmc: display the mode name and current bus speed in the mmc info   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 10/26] mmc: refactor SD startup to make it easier to support new modes   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 11/26] mmc: refactor MMC startup to make it easier to support new modes   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 12/26] mmc: make mmc_set_ios() return status   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 13/26] mmc: Enable signal voltage to be selected from mmc core   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 13/26] mmc: Enable signal voltage to be selected from mmc core   Jaehoon Chung
  • [U-Boot] [PATCH v2 14/26] mmc: Add a new callback function to perform the 74 clocks cycle sequence   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 15/26] mmc: add power cyle support in mmc core   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 16/26] mmc: add a new mmc parameter to disable mmc clock   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 17/26] mmc: disable the mmc clock during power off   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 18/26] mmc: Add a execute_tuning() callback to the mmc operations.   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 19/26] mmc: add HS200 support in MMC core   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 20/26] mmc: Add support for UHS modes   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 21/26] mmc: disable UHS modes if Vcc cannot be switched on and off   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 22/26] mmc: Change mode when switching to a boot partition   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 23/26] mmc: Retry some MMC cmds on failure   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 23/26] mmc: Retry some MMC cmds on failure   Jaehoon Chung
  • [U-Boot] [PATCH v2 24/26] mmc: use the right voltage level for MMC DDR and HS200 modes   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 24/26] mmc: use the right voltage level for MMC DDR and HS200 modes   Jaehoon Chung
  • [U-Boot] [PATCH v2 25/26] mmc: add a library function to send tuning command   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 26/26] dm: mmc: Add a library function to parse generic dt binding   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 26/26] dm: mmc: Add a library function to parse generic dt binding   Jaehoon Chung
    • [U-Boot] [PATCH v2 26/26] dm: mmc: Add a library function to parse generic dt binding   Simon Glass
  • [U-Boot] [PATCH v2 00/26] mmc: Add support for HS200 and UHS modes   Jaehoon Chung
• [U-Boot] [PATCH] Remove "no previous prototype" warning   Diego Dorta
  • [U-Boot] [PATCH] Remove "no previous prototype" warning   Fabio Estevam
• [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 1/5] Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 1/5] Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"   Tom Rini
      • [U-Boot] [PATCH v2 1/5] Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"   Jaehoon Chung
  • [U-Boot] [PATCH v2 2/5] omap: Update the base address of the MMC controllers   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 2/5] omap: Update the base address of the MMC controllers   Tom Rini
  • [U-Boot] [PATCH v2 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)   Tom Rini
  • [U-Boot] [PATCH v2 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable   Tom Rini
  • [U-Boot] [PATCH v2 5/5] mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bit   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 5/5] mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bit   Tom Rini
  • [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA   Jaehoon Chung
    • [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA   Simon Glass
      • [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA   Jaehoon Chung
    • [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA   Vignesh R
• [U-Boot] [PATCH v3 0/2] power: Add a driver to handle the PBIAS cell of the TI SOCs   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v3 0/2] power: Add a driver to handle the PBIAS cell of the TI SOCs   Jaehoon Chung
• [U-Boot] [PATCH v3 1/2] dm: core: Add functions to get strings and the string count from a stringlist   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v3 1/2] dm: core: Add functions to get strings and the string count from a stringlist   Simon Glass
• [U-Boot] [PATCH v3 2/2] regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1   Jean-Jacques Hiblot
• [U-Boot] [PATCH 00/23] mmc: omap5: Add support for UHS and HS200 modes   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 01/23] mmc: omap_hsmmc: cleanup clock configuration   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 02/23] mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 03/23] mmc: omap_hsmmc: add support to set default io voltage   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 04/23] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 05/23] mmc: omap_hsmmc: Enable DDR mode support   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 06/23] mmc: omap_hsmmc: Add tuning support   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 07/23] mmc: omap_hsmmc: Workaround for errata id i802   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 08/23] mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 09/23] mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 10/23] ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 11/23] mmc: omap_hsmmc: Add support to set IODELAY values   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 12/23] mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 13/23] mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 14/23] mmc: omap_hsmmc: update mmc->clock with the actual bus speed   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 15/23] mmc: omap_hsmmc: implement send_init_stream callback   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 16/23] mmc: omap_hsmmc: allow mmc clock to be gated   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 17/23] mmc: omap_hsmmc: add signal voltage selection support   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 18/23] ARM: OMAP5: set mmc clock frequency to 192MHz   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 19/23] ARM: dts: DRA7: use new dra7-specific compatible string   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 20/23] ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 21/23] dts: am57xx-beagle-x15: disable UHS and HS200 support   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 22/23] dts: am57xx-idk: disable HS200 support   Jean-Jacques Hiblot
  • [U-Boot] [PATCH 23/23] ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1   Jean-Jacques Hiblot
    • [U-Boot] [PATCH] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Antony Antony
      • [U-Boot] [PATCH] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Maxime Ripard
      • [U-Boot] [PATCH v2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Antony Antony
      • [U-Boot] [PATCH v2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Maxime Ripard
      • [U-Boot] [PATCH v3] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Antony Antony
      • [U-Boot] [PATCH v3] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Maxime Ripard
• [U-Boot] [PATCH 1/1] efi_loader: provide function comments for boot services   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_loader: provide function comments for boot services   Simon Glass
    • [U-Boot] [PATCH 1/1] efi_loader: provide function comments for boot services   Heinrich Schuchardt
• [U-Boot] efi-next: next patches to merge   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: call EFI_EXIT in efi_copy_mem, efi_set_mem   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_loader: call EFI_EXIT in efi_copy_mem, efi_set_mem   Simon Glass
• [U-Boot] [PATCH 0/2] configs: apalis/colibri imx6: don't configure video in spl   Max Krummenacher
  • [U-Boot] [PATCH 1/2] configs: colibri_imx6: don't configure video in spl   Max Krummenacher
    • [U-Boot] [PATCH 1/2] configs: colibri_imx6: don't configure video in spl   Stefano Babic
  • [U-Boot] [PATCH 2/2] configs: apalis_imx6: don't configure video in spl   Max Krummenacher
• [U-Boot] [PATCH v2] imx: sys_proto: Add a prototype for board_mmc_get_env_dev()   Diego Dorta
  • [U-Boot] [PATCH v2] imx: sys_proto: Add a prototype for board_mmc_get_env_dev()   Fabio Estevam
  • [U-Boot] [PATCH v2] imx: sys_proto: Add a prototype for board_mmc_get_env_dev()   Stefano Babic
• [U-Boot] Invitation: Unibuild discussion @ Thu 21 Sep 2017 12:00 - 13:00 (MDT) (u-boot at lists.denx.de)   Simon Glass
• [U-Boot] Updated invitation: Unibuild discussion @ Thu 21 Sep 2017 12:00 - 13:30 (MDT) (u-boot at lists.denx.de)   sjg at google.com
  • [U-Boot] Updated invitation: Unibuild discussion @ Thu 21 Sep 2017 12:00 - 13:30 (MDT) (u-boot at lists.denx.de)   Simon Glass
• [U-Boot] [PATCH 0/4] arm: am57xx/dra7xx: Improve eMMC Linux boot   Sam Protsenko
  • [U-Boot] [PATCH 1/4] arm: am57xx: Fix Linux boot from eMMC   Sam Protsenko
    • [U-Boot] [PATCH 1/4] arm: am57xx: Fix Linux boot from eMMC   Tom Rini
    • [U-Boot] [U-Boot,1/4] arm: am57xx: Fix Linux boot from eMMC   Tom Rini
  • [U-Boot] [PATCH 2/4] arm: dra7xx: Fix Linux boot from eMMC   Sam Protsenko
    • [U-Boot] [PATCH 2/4] arm: dra7xx: Fix Linux boot from eMMC   Tom Rini
    • [U-Boot] [U-Boot,2/4] arm: dra7xx: Fix Linux boot from eMMC   Tom Rini
  • [U-Boot] [PATCH 3/4] env: ti: boot: Extract command for eMMC Linux boot   Sam Protsenko
    • [U-Boot] [PATCH 3/4] env: ti: boot: Extract command for eMMC Linux boot   Tom Rini
    • [U-Boot] [U-Boot, 3/4] env: ti: boot: Extract command for eMMC Linux boot   Tom Rini
  • [U-Boot] [PATCH 4/4] env: ti: boot: Show boot status information   Sam Protsenko
    • [U-Boot] [PATCH 4/4] env: ti: boot: Show boot status information   Tom Rini
    • [U-Boot] [U-Boot, 4/4] env: ti: boot: Show boot status information   Tom Rini
  • [U-Boot] [PATCH 0/4] arm: am57xx/dra7xx: Improve eMMC Linux boot   Sam Protsenko
    • [U-Boot] [PATCH 0/4] arm: am57xx/dra7xx: Improve eMMC Linux boot   Sam Protsenko
• [U-Boot] [PATCH 1/1] omap: Omit fastboot.userdata_size related errors   Sam Protsenko
• [U-Boot] Request For Comments: wget and TCP listener   Duncan Hare
  • [U-Boot] Request For Comments: wget and TCP listener   Simon Glass
• [U-Boot] [PATCH 1/2] disk: Provide API to get partition by name for specific type   Sam Protsenko
  • [U-Boot] [PATCH 2/2] omap: Fix warning when looking for userdata part   Sam Protsenko
    • [U-Boot] [PATCH 2/2] omap: Fix warning when looking for userdata part   Simon Glass
  • [U-Boot] [PATCH 1/2] disk: Provide API to get partition by name for specific type   Simon Glass
    • [U-Boot] [PATCH 1/2] disk: Provide API to get partition by name for specific type   Sam Protsenko
• [U-Boot] Armada 38x clearfog pci trouble   Влад Мао
  • [U-Boot] Armada 38x clearfog pci trouble   Влад Мао
  • [U-Boot] Armada 38x clearfog pci trouble   Stefan Roese
    • [U-Boot] Armada 38x clearfog pci trouble   Stefan Roese
      • [U-Boot] Armada 38x clearfog pci trouble   Bin Meng
      • [U-Boot] Armada 38x clearfog pci trouble   Stefan Roese
• [U-Boot] [PATCH 1/1] ARMv8: get new GD address from gd->new_gd directly   zijun_hu
  • [U-Boot] [PATCH 1/1] ARMv8: get new GD address from gd->new_gd directly   Simon Glass
• [U-Boot] [PATCH] armv8: Apply workaround for USB erratum A-009007 to LS1088A   Ran Wang
• [U-Boot] [PATCH 0/9] sunxi: A83T improvements   Chen-Yu Tsai
  • [U-Boot] [PATCH 4/9] sunxi: Switch MUSB to gadget mode on the Bananapi M3   Chen-Yu Tsai
    • [U-Boot] [PATCH 4/9] sunxi: Switch MUSB to gadget mode on the Bananapi M3   Maxime Ripard
      • [U-Boot] [PATCH 4/9] sunxi: Switch MUSB to gadget mode on the Bananapi M3   Chen-Yu Tsai
      • [U-Boot] [PATCH 4/9] sunxi: Switch MUSB to gadget mode on the Bananapi M3   Maxime Ripard
  • [U-Boot] [PATCH 5/9] sunxi: Switch MUSB to gadget mode on the Cubietruck Plus   Chen-Yu Tsai
  • [U-Boot] [PATCH 6/9] net: sun8i_emac: Support RX/TX delay chains   Chen-Yu Tsai
    • [U-Boot] [PATCH 6/9] net: sun8i_emac: Support RX/TX delay chains   Maxime Ripard
    • [U-Boot] [PATCH 6/9] net: sun8i_emac: Support RX/TX delay chains   Joe Hershberger
      • [U-Boot] [PATCH 6/9] net: sun8i_emac: Support RX/TX delay chains   Chen-Yu Tsai
  • [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs   Chen-Yu Tsai
    • [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs   Maxime Ripard
    • [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs   Joe Hershberger
  • [U-Boot] [PATCH 8/9] sunxi: Enable EMAC on the Cubietruck Plus   Chen-Yu Tsai
  • [U-Boot] [PATCH 9/9] sunxi: Enable EMAC on the Bananapi M3   Chen-Yu Tsai
• [U-Boot] [PATCH 1/9] sunxi: rename Bananapi M3 dts file name   Chen-Yu Tsai
  • [U-Boot] [PATCH 1/9] sunxi: rename Bananapi M3 dts file name   Maxime Ripard
• [U-Boot] [PATCH 2/9] sunxi: Enable eMMC on Cubietruck Plus   Chen-Yu Tsai
  • [U-Boot] [PATCH 2/9] sunxi: Enable eMMC on Cubietruck Plus   Maxime Ripard
• [U-Boot] [PATCH 3/9] sunxi: Fix USB PHY control register offset for A83T   Chen-Yu Tsai
  • [U-Boot] [PATCH 3/9] sunxi: Fix USB PHY control register offset for A83T   Maxime Ripard
• [U-Boot] How to bring in support for GnuBee on MediaTek MT7621A   Niklaus Giger
• [U-Boot] [PATCH] doc: Fix statements on case sensitivity for regulator prefix   Felix Brack
• [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function   David Müller (ELSOFT AG)
  • [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function   Marek Vasut
    • [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function   David Müller (ELSOFT AG)
      • [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function   Marek Vasut
  • [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function   Tim Harvey
• [U-Boot] Ambiguous regulator node name prefixes   Felix Brack
• [U-Boot] [PATCH] imx: Include <input.h> header file   Diego Dorta
  • [U-Boot] [PATCH] imx: Include <input.h> header file   Fabio Estevam
• [U-Boot] [PATCH v2 0/3] STiH410-B2260: update environment/configuration settings   patrice.chotard at st.com
  • [U-Boot] [PATCH v2 1/3] board: STiH410-B2260: update environment variable   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 1/3] board: STiH410-B2260: update environment variable   Simon Glass
  • [U-Boot] [PATCH v2 2/3] board: STiH410-B2260: fix sdram size   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 2/3] board: STiH410-B2260: fix sdram size   Simon Glass
      • [U-Boot] [PATCH v2 2/3] board: STiH410-B2260: fix sdram size   Patrice CHOTARD
  • [U-Boot] [PATCH v2 3/3] board: STiH410-B2260: set ramdisk_addr_r to 0x48000000   patrice.chotard at st.com
    • [U-Boot] [PATCH v2 3/3] board: STiH410-B2260: set ramdisk_addr_r to 0x48000000   Simon Glass
• [U-Boot] [PATCH] ARM: MV_EBU: Increase size of PCIe default mapping   VlaoMao
• [U-Boot] [PATCH] ARM: mvebu: handle unused DRAM banks with ECC enabled   Chris Packham
  • [U-Boot] [PATCH] ARM: mvebu: handle unused DRAM banks with ECC enabled   Joshua Scott
  • [U-Boot] [PATCH] ARM: mvebu: handle unused DRAM banks with ECC enabled   Stefan Roese
• [U-Boot] [PATCH] SPL: SPI: sunxi: add SPL FIT image support   Andre Przywara
  • [U-Boot] [PATCH] SPL: SPI: sunxi: add SPL FIT image support   Maxime Ripard
    • [U-Boot] [PATCH] SPL: SPI: sunxi: add SPL FIT image support   Jagan Teki
• [U-Boot] [PATCH 1/6] mx6sabresd: Avoid calling setup_display() from SPL code   Fabio Estevam
  • [U-Boot] [PATCH 2/6] cgtqmx6eval: Avoid calling setup_display() from SPL code   Fabio Estevam
    • [U-Boot] [PATCH 2/6] cgtqmx6eval: Avoid calling setup_display() from SPL code   Stefano Babic
  • [U-Boot] [PATCH 3/6] wandboard: Avoid calling setup_display() from SPL code   Fabio Estevam
    • [U-Boot] [PATCH 3/6] wandboard: Avoid calling setup_display() from SPL code   Stefano Babic
  • [U-Boot] [PATCH 4/6] mx6cuboxi: Avoid calling setup_display() from SPL code   Fabio Estevam
    • [U-Boot] [PATCH 4/6] mx6cuboxi: Avoid calling setup_display() from SPL code   Stefano Babic
  • [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code   Fabio Estevam
    • [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code   Stefano Babic
      • [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code   Fabio Estevam
      • [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code   Fabio Estevam
      • [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code   Stefano Babic
      • [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code   Anatolij Gustschin
      • [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code   Max Krummenacher
      • [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code   Stefano Babic
  • [U-Boot] [PATCH 6/6] colibri_imx6: Avoid calling setup_display() from SPL code   Fabio Estevam
    • [U-Boot] [PATCH 6/6] colibri_imx6: Avoid calling setup_display() from SPL code   Max Krummenacher
  • [U-Boot] [PATCH 1/6] mx6sabresd: Avoid calling setup_display() from SPL code   Stefano Babic
• [U-Boot] [PATCH 1/1] ARMv8: fix error in freeing stack frame   zijun_hu
  • [U-Boot] [PATCH 1/1] ARMv8: fix error in freeing stack frame   Simon Glass
• [U-Boot] FAT filesystems and mtools-created filesystems   Tuomas Tynkkynen
  • [U-Boot] FAT filesystems and mtools-created filesystems   Tuomas Tynkkynen
    • [U-Boot] FAT filesystems and mtools-created filesystems   Rob Clark
  • [U-Boot] FAT filesystems and mtools-created filesystems   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
    • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
      • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
      • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
    • [U-Boot] [PULL] u-boot-usb/master   Bin Meng
      • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
    • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
      • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
      • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] Please pull u-boot-video/imx   Anatolij Gustschin
• [U-Boot] [PATCH 0/4] cl-som-imx7: initial support   Uri Mashiach
  • [U-Boot] [PATCH 1/4] imx: mx7: fix the CCM_ macros   Uri Mashiach
  • [U-Boot] [PATCH 2/4] imx: mx7: DDR controller configuration for the i.MX7 architecture   Uri Mashiach
  • [U-Boot] [PATCH 3/4] imx: mx7: SPL support for i.MX7   Uri Mashiach
    • [U-Boot] [PATCH 3/4] imx: mx7: SPL support for i.MX7   Fabio Estevam
  • [U-Boot] [PATCH 4/4] arm: imx7d: add support for Compulab cl-som-imx7   Uri Mashiach
  • [U-Boot] [PATCH 0/4] cl-som-imx7: initial support   Fabio Estevam
• [U-Boot] [PATCH 1/1] Makefile: indicate dtc source location   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] Makefile: indicate dtc source location   Simon Glass
    • [U-Boot] [PATCH 1/1] Makefile: indicate dtc source location   Bin Meng
• [U-Boot] [PATCH v2 1/2] arm: mvebu: fix boot from UART on ClearFog Base   Baruch Siach
  • [U-Boot] [PATCH v2 1/2] arm: mvebu: fix boot from UART on ClearFog Base   Stefan Roese
• [U-Boot] [PATCH v2 2/2] arm: mvebu: clearfog: document boot from UART   Baruch Siach
  • [U-Boot] [PATCH v2 2/2] arm: mvebu: clearfog: document boot from UART   Stefan Roese
• [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed   Tom Rini
  • [U-Boot] [PATCH 1/5] scripts/dtc: Update to upstream version v1.4.3   Tom Rini
  • [U-Boot] [PATCH 2/5] scripts/dtc: Update to upstream version v1.4.4   Tom Rini
  • [U-Boot] [PATCH 3/5] scripts/dtc: Update to upstream version v1.4.4-50-gfe50bd1ecc1d   Tom Rini
  • [U-Boot] [PATCH 4/5] dtc: Switch to building and using our own dtc unless provided   Tom Rini
  • [U-Boot] [PATCH 5/5] tools/mkimage: Make the path to the dtc binary that mkimage calls configurable   Tom Rini
  • [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed   Marek Vasut
    • [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed   Tom Rini
      • [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed   Łukasz Majewski
      • [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed   Tom Rini
      • [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed   Marek Vasut
  • [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed   Wolfgang Denk
  • [U-Boot] [PATCH 0/5] REVERT Follow the Linux Kernel in building dtc as needed   Wolfgang Denk
    • [U-Boot] [PATCH 1/5] Revert "tools/mkimage: Make the path to the dtc binary that mkimage calls configurable"   Wolfgang Denk
    • [U-Boot] [PATCH 2/5] Revert "dtc: Switch to building and using our own dtc unless provided"   Wolfgang Denk
    • [U-Boot] [PATCH 3/5] Revert "scripts/dtc: Update to upstream version v1.4.4-50-gfe50bd1ecc1d"   Wolfgang Denk
    • [U-Boot] [PATCH 4/5] Revert "scripts/dtc: Update to upstream version v1.4.4"   Wolfgang Denk
    • [U-Boot] [PATCH 5/5] Revert "scripts/dtc: Update to upstream version v1.4.3"   Wolfgang Denk
    • [U-Boot] [PATCH 0/5] REVERT Follow the Linux Kernel in building dtc as needed   Tom Rini
      • [U-Boot] [PATCH 0/5] REVERT Follow the Linux Kernel in building dtc as needed   Wolfgang Denk
      • [U-Boot] [PATCH 0/5] REVERT Follow the Linux Kernel in building dtc as needed   Tom Rini
• [U-Boot] Make Menuconfig Fails   Duncan Hare
  • [U-Boot] Make Menuconfig Fails   Łukasz Majewski
• [U-Boot] [PATCH 00/17] efi_loader: Simple Network Protocol   Heinrich Schuchardt
  • [U-Boot] [PATCH 01/17] efi_loader: call EFI_EXIT in efi_copy_mem, efi_set_mem   Heinrich Schuchardt
  • [U-Boot] [PATCH 02/17] efi_loader: parameters of CopyMem and SetMem   Heinrich Schuchardt
  • [U-Boot] [PATCH 03/17] efi_loader: pass GUIDs as const efi_guid_t *   Heinrich Schuchardt
  • [U-Boot] [PATCH 05/17] efi_loader: incorrect definition of EFI_SIMPLE_NETWORK_PROTOCOL   Heinrich Schuchardt
  • [U-Boot] [PATCH 06/17] efi_loader: correct bits of receive_filters bit mask   Heinrich Schuchardt
  • [U-Boot] [PATCH 07/17] efi_loader: fill simple network protocol revision   Heinrich Schuchardt
  • [U-Boot] [PATCH 08/17] efi_loader: efi_net: hwaddr_size = 6   Heinrich Schuchardt
  • [U-Boot] [PATCH 09/17] efi_net: return EFI_UNSUPPORTED where appropriate   Heinrich Schuchardt
  • [U-Boot] [PATCH 10/17] efi_loader: use events for efi_net_receive   Heinrich Schuchardt
  • [U-Boot] [PATCH 11/17] efi_loader: implement WaitForPacket event   Heinrich Schuchardt
  • [U-Boot] [PATCH 12/17] efi_loader: fix efi_net_get_status   Heinrich Schuchardt
  • [U-Boot] [PATCH 13/17] efi_loader: size fields in SimpleNetworkProtocol   Heinrich Schuchardt
  • [U-Boot] [PATCH 14/17] efi_loader: fill return values in SimpleNetworkProtocol   Heinrich Schuchardt
  • [U-Boot] [PATCH 15/17] efi_selftest: correct definition of efi_st_error   Heinrich Schuchardt
  • [U-Boot] [PATCH 16/17] efi_selftest: allow printing MAC addresses   Heinrich Schuchardt
  • [U-Boot] [PATCH 17/17] efi_loader: supply EFI network test   Heinrich Schuchardt
• [U-Boot] [PATCH 04/17] efi_loader: wrong type in wait_for_event   Heinrich Schuchardt
• [U-Boot] [PATCH 1/3] fs-test: Add FAT16 support   Tuomas Tynkkynen
  • [U-Boot] [PATCH 2/3] fs/fat: Fix pathnames using '..' that lead to the root directory   Tuomas Tynkkynen
    • [U-Boot] [PATCH 2/3] fs/fat: Fix pathnames using '..' that lead to the root directory   Tom Rini
  • [U-Boot] [PATCH 3/3] fs-test: Add test for a filename using '..' to go back to the root   Tuomas Tynkkynen
    • [U-Boot] [PATCH 3/3] fs-test: Add test for a filename using '..' to go back to the root   Tom Rini
      • [U-Boot] [PATCH 3/3] fs-test: Add test for a filename using '..' to go back to the root   Rob Clark
      • [U-Boot] [PATCH 3/3] fs-test: Add test for a filename using '..' to go back to the root   Tuomas Tynkkynen
  • [U-Boot] [PATCH 1/3] fs-test: Add FAT16 support   Tom Rini
  • [U-Boot] [PATCH 1/3] fs-test: Add FAT16 support   Rob Clark
• [U-Boot] [PATCH] GPT: fix memory leaks identified by Coverity   alison at peloton-tech.com
  • [U-Boot] [PATCH] GPT: fix memory leaks identified by Coverity   Łukasz Majewski
    • [U-Boot] [PATCHv2] GPT: fix memory leaks identified by Coverity   alison at peloton-tech.com
      • [U-Boot] [PATCHv2] GPT: fix memory leaks identified by Coverity   Bin Meng
    • [U-Boot] [PATCHv2] GPT: fix memory leaks identified by Coverity   alison at peloton-tech.com
      • [U-Boot] [PATCHv2] GPT: fix memory leaks identified by Coverity   Tom Rini
• [U-Boot] ZynqMP qspi   Liam Beguin
  • [U-Boot] ZynqMP qspi   Liam Beguin
  • [U-Boot] ZynqMP qspi   Jagan Teki
    • [U-Boot] ZynqMP qspi   Siva Durga Prasad Paladugu
      • [U-Boot] ZynqMP qspi   Liam Beguin
• [U-Boot] [PATCH] Powerpc: Make pcie link state judge more specific   Bao Xiaowei
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
  • [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] tegra: fdt: create initial files and changes to support the tegra124 based nyan-kitty chromebase by acer   Benjamin Roszak
• [U-Boot] [PATCH v3 0/3] STiH410-B2260: update environment/configuration settings   patrice.chotard at st.com
  • [U-Boot] [PATCH v3 1/3] board: STiH410-B2260: update environment variable   patrice.chotard at st.com
  • [U-Boot] [PATCH v3 2/3] board: STiH410-B2260: fix sdram size   patrice.chotard at st.com
  • [U-Boot] [PATCH v3 3/3] board: STiH410-B2260: set ramdisk_addr_r to 0x48000000   patrice.chotard at st.com
• [U-Boot] [PATCH v4] spi: fsl_qspi: Add controller busy check before new spi operation   Jagan Teki
• [U-Boot] [PATCH v2] mtd/spi: Add MT35XU512ABA1G12 NOR flash support   Jagan Teki
• [U-Boot] [PATCH 1/1] ARMv8: make master CPU checking logic more clear   zijun_hu
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
  • [U-Boot] Pull request: u-boot-spi/master   Łukasz Majewski
    • [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
  • [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH] rockchip: rk3188: ram: add support for 16bit row address   Kever Yang
  • [U-Boot] rockchip: rk3188: ram: add support for 16bit row address   Philipp Tomsich
  • [U-Boot] rockchip: rk3188: ram: add support for 16bit row address   Philipp Tomsich
  • [U-Boot] [PATCH] rockchip: rk3188: ram: add support for 16bit row address   Dr. Philipp Tomsich
  • [U-Boot] rockchip: rk3188: ram: add support for 16bit row address   Philipp Tomsich
• [U-Boot] [PATCH v2 00/19] Add FPGA, SDRAM, SPL loads U-boot & booting to console   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v2 01/19] ARM: socfpga: add bindings doc for arria10 fpga manager   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 01/19] ARM: socfpga: add bindings doc for arria10 fpga manager   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 01/19] ARM: socfpga: add bindings doc for arria10 fpga manager   Marek Vasut
  • [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager   Marek Vasut
      • [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager   Chee, Tien Fong
      • [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager   Marek Vasut
      • [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager   Chee, Tien Fong
      • [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager   Marek Vasut
      • [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager   Chee, Tien Fong
    • [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager   Marek Vasut
      • [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager   Chee, Tien Fong
  • [U-Boot] [PATCH v2 03/19] dts: Add FPGA bitstream properties to Arria 10 DTS   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v2 04/19] arm: socfpga: Add Arria 10 SoCFPGA programming interface   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 04/19] arm: socfpga: Add Arria 10 SoCFPGA programming interface   Marek Vasut
      • [U-Boot] [PATCH v2 04/19] arm: socfpga: Add Arria 10 SoCFPGA programming interface   Chee, Tien Fong
  • [U-Boot] [PATCH v2 05/19] arm: socfpga: Enhance FPGA program write rbf data with size >= 4 bytes   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 05/19] arm: socfpga: Enhance FPGA program write rbf data with size >= 4 bytes   Marek Vasut
  • [U-Boot] [PATCH v2 06/19] dts: Enable fpga-mgr node build for Arria 10 SPL   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v2 07/19] fdt: Add compatible strings for Arria 10   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 07/19] fdt: Add compatible strings for Arria 10   Marek Vasut
  • [U-Boot] [PATCH v2 08/19] fs: Enable generic filesystems interface support in SPL.   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 08/19] fs: Enable generic filesystems interface support in SPL.   Marek Vasut
  • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Marek Vasut
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Chee, Tien Fong
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Marek Vasut
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Chee, Tien Fong
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Marek Vasut
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Chee, Tien Fong
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Chee, Tien Fong
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Marek Vasut
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Chee, Tien Fong
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Marek Vasut
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Chee, Tien Fong
      • [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash   Marek Vasut
  • [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name   Marek Vasut
      • [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name   Chee, Tien Fong
      • [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name   Marek Vasut
      • [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name   Chee, Tien Fong
  • [U-Boot] [PATCH v2 11/19] arm: socfpga: Add DRAM bank size initialization function   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 11/19] arm: socfpga: Add DRAM bank size initialization function   Marek Vasut
      • [U-Boot] [PATCH v2 11/19] arm: socfpga: Add DRAM bank size initialization function   Chee, Tien Fong
      • [U-Boot] [PATCH v2 11/19] arm: socfpga: Add DRAM bank size initialization function   Marek Vasut
  • [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10   Marek Vasut
      • [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10   Marek Vasut
      • [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10   Chee, Tien Fong
  • [U-Boot] [PATCH v2 13/19] configs: Add DDR Kconfig support for Arria 10   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v2 14/19] arm: socfpga: Enable build for DDR Arria 10   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 14/19] arm: socfpga: Enable build for DDR Arria 10   Marek Vasut
      • [U-Boot] [PATCH v2 14/19] arm: socfpga: Enable build for DDR Arria 10   Chee, Tien Fong
  • [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL   Marek Vasut
      • [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL   Chee, Tien Fong
      • [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL   Marek Vasut
      • [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL   Chee, Tien Fong
      • [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL   Marek Vasut
      • [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL   Chee, Tien Fong
  • [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10   Marek Vasut
      • [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10   Marek Vasut
      • [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10   Marek Vasut
      • [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10   Chee, Tien Fong
  • [U-Boot] [PATCH v2 17/19] arm: socfpga: Adding clock frequency info for U-boot   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 17/19] arm: socfpga: Adding clock frequency info for U-boot   Marek Vasut
      • [U-Boot] [PATCH v2 17/19] arm: socfpga: Adding clock frequency info for U-boot   Chee, Tien Fong
      • [U-Boot] [PATCH v2 17/19] arm: socfpga: Adding clock frequency info for U-boot   Chee, Tien Fong
  • [U-Boot] [PATCH v2 18/19] arm: socfpga: Adding SoCFPGA info for both SPL and U-boot   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot   Marek Vasut
      • [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot   Chee, Tien Fong
      • [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot   Marek Vasut
      • [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot   Chee, Tien Fong
• [U-Boot] [PATCH 00/15] spl: atf: update booting images via ATF to use info from FIT images   Michal Simek
• [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Lukasz Majewski
  • [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Jagan Teki
    • [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Łukasz Majewski
      • [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Łukasz Majewski
      • [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Jagan Teki
      • [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Łukasz Majewski
      • [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Jagan Teki
  • [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Jagan Teki
    • [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation   Łukasz Majewski
• [U-Boot] [PATCH] drivers: mmc: Avoid memory leak in case of failure   Suniel Mahesh
• [U-Boot] [PATCH V4 11/12] imx: mx6sabresd: enable dm drivers   Stefano Babic
  • [U-Boot] [PATCH V4 11/12] imx: mx6sabresd: enable dm drivers   Peng Fan
    • [U-Boot] [PATCH V4 11/12] imx: mx6sabresd: enable dm drivers   Peng Fan
• [U-Boot] u-boot-usb/master sandbox unit test failure   Stephen Warren
  • [U-Boot] u-boot-usb/master sandbox unit test failure   Marek Vasut
    • [U-Boot] u-boot-usb/master sandbox unit test failure   Stephen Warren
      • [U-Boot] u-boot-usb/master sandbox unit test failure   Bin Meng
      • [U-Boot] u-boot-usb/master sandbox unit test failure   Bin Meng
      • [U-Boot] u-boot-usb/master sandbox unit test failure   Bin Meng
      • [U-Boot] u-boot-usb/master sandbox unit test failure   Bin Meng
      • [U-Boot] u-boot-usb/master sandbox unit test failure   Stephen Warren
      • [U-Boot] u-boot-usb/master sandbox unit test failure   Marek Vasut
• [U-Boot] [PATCH] armv8: fsl-layerscape: Put SATA code under SATA configs   York Sun
• [U-Boot] [PATCH 1/1] board/ls2080ardb: Remove CONFIG_DISPLAY_BOARDINFO_LATE   York Sun
• [U-Boot] [PATCH 1/1] board/ls2081ardb: Update QSPI flash type from n25q512a to s25fs512s   York Sun
• [U-Boot] [PATCH] pci: layerscape: Fixup iommu-map for LS208xA   York Sun
• [U-Boot] [PATCH] mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definition   Fabio Estevam
  • [U-Boot] [PATCH] mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definition   Stefan Agner
• [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09   Peter Robinson
  • [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09   Fabio Estevam
    • [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09   Diego Dorta
      • [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09   Peter Robinson
      • [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09   Fabio Estevam
• [U-Boot] [PATCH v2 1/4] fs/ext4: Fix group descriptor checksum calculation   Tuomas Tynkkynen
  • [U-Boot] [PATCH v2 2/4] fs-test: Add FAT16 support   Tuomas Tynkkynen
    • [U-Boot] [PATCH v2 2/4] fs-test: Add FAT16 support   Tom Rini
  • [U-Boot] [PATCH v2 3/4] fs/fat: Fix pathnames using '..' that lead to the root directory   Tuomas Tynkkynen
  • [U-Boot] [PATCH v2 4/4] fs-test: Add test for a filename using '..' to go back to the root   Tuomas Tynkkynen
    • [U-Boot] [PATCH v2 4/4] fs-test: Add test for a filename using '..' to go back to the root   Tom Rini
  • [U-Boot] [PATCH v2 1/4] fs/ext4: Fix group descriptor checksum calculation   Tom Rini
    • [U-Boot] [PATCH v2 1/4] fs/ext4: Fix group descriptor checksum calculation   Tuomas Tynkkynen
      • [U-Boot] [PATCH v2 1/4] fs/ext4: Fix group descriptor checksum calculation   Tom Rini
• [U-Boot] [PATCH 1/2] video: test: Helper for writing strings   Rob Clark
  • [U-Boot] [PATCH 2/2] video: test: Add ANSI escape sequence tests   Rob Clark
    • [U-Boot] [PATCH 2/2] video: test: Add ANSI escape sequence tests   Anatolij Gustschin
  • [U-Boot] [PATCH 1/2] video: test: Helper for writing strings   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] pinctrl: rmobile: Add Renesas RCar pincontrol driver   Marek Vasut
  • [U-Boot] [PATCH 2/2] ARM: rmobile: Enable pinconf   Marek Vasut
  • [U-Boot] [PATCH 1/2] pinctrl: rmobile: Add Renesas RCar pincontrol driver   Marek Vasut
• [U-Boot] [PATCH v3 8/8] dm: define dev_*() log functions in DM header   Masahiro Yamada
• [U-Boot] [PATCH] linux/bitfield.h: import <linux/bitfields.h> from Linux 4.13   Masahiro Yamada
• [U-Boot] [PATCH] arm: mvebu: Remove theadorable_defconfig   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: Convert CONFIG_MVNETA to Kconfig   Stefan Roese
• [U-Boot] [PATCH] fs/fat: Fix 'CACHE: Misaligned operation at range' warnings   Tuomas Tynkkynen
  • [U-Boot] [PATCH] fs/fat: Fix 'CACHE: Misaligned operation at range' warnings   Tom Rini
• [U-Boot] [PATCH RESEND] DW SPI: Get clock value from Device Tree   Eugeniy Paltsev
• [U-Boot] [PATCH] sunxi: clk: fix N formula for CPUX clocks   Quentin Schulz
  • [U-Boot] [PATCH] sunxi: clk: fix N formula for CPUX clocks   Maxime Ripard
• [U-Boot] strange behaviors with setexpr syntax error and '==' != '-eq"   Clément Péron
  • [U-Boot] strange behaviors with setexpr syntax error and '==' != '-eq"   Wolfgang Denk
    • [U-Boot] strange behaviors with setexpr syntax error and '==' != '-eq"   Clément Péron
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
  • [U-Boot] Please pull u-boot-cfi-flash/master   Tom Rini
• [U-Boot] [PATCH] test/overlay: Fix various malloc/free leaks   Tom Rini
  • [U-Boot] [PATCH] test/overlay: Fix various malloc/free leaks   Langer, Thomas
    • [U-Boot] [PATCH] test/overlay: Fix various malloc/free leaks   Tom Rini
• [U-Boot] "usb storage" command issues   Stefan Roese
• [U-Boot] [PATCH] mmc: uniphier-sd: Update the file to match V3 patchset   Marek Vasut
  • [U-Boot] [PATCH] mmc: uniphier-sd: Update the file to match V3 patchset   Jaehoon Chung
  • [U-Boot] [PATCH] mmc: uniphier-sd: Update the file to match V3 patchset   Masahiro Yamada
  • [U-Boot] [PATCH] mmc: uniphier-sd: Update the file to match V3 patchset   Jaehoon Chung
• [U-Boot] [PATCH] ARM: rmobile: Switch to UniPhier SD driver on Gen3   Marek Vasut
• [U-Boot] [PATCH] test/dm: Fix string handling issues in the eth test   Tom Rini
  • [U-Boot] [PATCH] test/dm: Fix string handling issues in the eth test   Simon Glass
  • [U-Boot] [PATCH] test/dm: Fix string handling issues in the eth test   Joe Hershberger
• [U-Boot] [PATCH v2 00/14] log: Add a new logging feature   Simon Glass
  • [U-Boot] [PATCH v2 01/14] Revert "sandbox: remove os_putc() and os_puts()"   Simon Glass
  • [U-Boot] [PATCH v2 02/14] sandbox: Adjust pre-console address to avoid conflict   Simon Glass
  • [U-Boot] [PATCH v2 03/14] Revert "sandbox: Drop special case console code for sandbox"   Simon Glass
  • [U-Boot] [PATCH v2 04/14] Move debug and logging support to a separate header   Simon Glass
  • [U-Boot] [PATCH v2 05/14] mtdparts: Correct use of debug()   Simon Glass
  • [U-Boot] [PATCH v2 06/14] Drop the log buffer   Simon Glass
  • [U-Boot] [PATCH v2 07/14] log: Add an implemention of logging   Simon Glass
  • [U-Boot] [PATCH v2 08/14] log: Add a console driver   Simon Glass
  • [U-Boot] [PATCH v2 09/14] log: Add a 'log level' command   Simon Glass
  • [U-Boot] [PATCH v2 10/14] log: Add a test command   Simon Glass
  • [U-Boot] [PATCH v2 11/14] log: Plumb logging into the init sequence   Simon Glass
  • [U-Boot] [PATCH v2 12/14] log: sandbox: Enable logging   Simon Glass
  • [U-Boot] [PATCH v2 13/14] log: test: Add a pytest for logging   Simon Glass
  • [U-Boot] [PATCH v2 14/14] log: Add documentation   Simon Glass
• [U-Boot] [PATCH] cmd/nvedit.c: Update input handling to cover overflow cases   Tom Rini
• [U-Boot] [PATCH] cmd/pxe.c: Rework initrd and bootargs handling slightly   Tom Rini
• [U-Boot] [PATCH] cmd/time.c: Initialize 'repeatable' variable   Tom Rini
• [U-Boot] [PATCH] usb: kbd: Don't fail with iomux   Rob Clark
• [U-Boot] [PATCH] tools/fit_image.c: Update some return code paths   Tom Rini
• [U-Boot] [PATCH] fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls   Tom Rini
• [U-Boot] BUG: Environment is in SPI flash does not even compile (at least for Orange PI PC2   kope at madnet.sk
• [U-Boot] [PATCH v2 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC   Kever Yang
  • [U-Boot] [PATCH v2 2/5] power: pmic: rk816: support rk816 pmic   Kever Yang
    • [U-Boot] [U-Boot, v2, 2/5] power: pmic: rk816: support rk816 pmic   Philipp Tomsich
      • [U-Boot] [U-Boot, v2, 2/5] power: pmic: rk816: support rk816 pmic   Kever Yang
      • [U-Boot] [U-Boot, v2, 2/5] power: pmic: rk816: support rk816 pmic   Dr. Philipp Tomsich
  • [U-Boot] [PATCH v2 3/5] power: pmic: rk805: support rk805 pmic   Kever Yang
    • [U-Boot] [U-Boot, v2, 3/5] power: pmic: rk805: support rk805 pmic   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 3/5] power: pmic: rk805: support rk805 pmic   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 3/5] power: pmic: rk805: support rk805 pmic   Philipp Tomsich
  • [U-Boot] [PATCH v2 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver   Kever Yang
    • [U-Boot] [U-Boot, v2, 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver   Philipp Tomsich
  • [U-Boot] [PATCH v2 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes   Kever Yang
    • [U-Boot] [U-Boot, v2, 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes   Philipp Tomsich
  • [U-Boot] [PATCH v2 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC   Heiko Schocher
  • [U-Boot] [U-Boot, v2, 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: clk: rk3368: always run rkclk_init when driver probe   Kever Yang
• [U-Boot] [PATCH v2 0/4] move rockchip sdram driver to driver/ram   Kever Yang
  • [U-Boot] [PATCH v2 1/4] rockchip: rk3399: move sdram driver to driver/ram   Kever Yang
    • [U-Boot] [U-Boot, v2, 1/4] rockchip: rk3399: move sdram driver to driver/ram   Philipp Tomsich
  • [U-Boot] [PATCH v2 2/4] rockchip: rk3188: move sdram driver to driver/ram   Kever Yang
    • [U-Boot] [U-Boot, v2, 2/4] rockchip: rk3188: move sdram driver to driver/ram   Philipp Tomsich
  • [U-Boot] [PATCH v2 3/4] rockchip: rk3288: move sdram driver to driver/ram   Kever Yang
    • [U-Boot] [U-Boot, v2, 3/4] rockchip: rk3288: move sdram driver to driver/ram   Philipp Tomsich
  • [U-Boot] [PATCH v2 4/4] rockchip: rk3328: move sdram driver to driver/ram   Kever Yang
    • [U-Boot] [U-Boot, v2, 4/4] rockchip: rk3328: move sdram driver to driver/ram   Philipp Tomsich
• [U-Boot] [PATCH v4 0/2] rockchip: rk3229: add sdram and sd support   Kever Yang
  • [U-Boot] [PATCH v4 1/2] rockchip: rk322x: add sdram driver   Kever Yang
    • [U-Boot] [PATCH v4 1/2] rockchip: rk322x: add sdram driver   Dr. Philipp Tomsich
    • [U-Boot] [U-Boot,v4,1/2] rockchip: rk322x: add sdram driver   Philipp Tomsich
  • [U-Boot] [PATCH v4 2/2] rockchip: dts: rk3229: remove dram channel info   Kever Yang
    • [U-Boot] [U-Boot, v4, 2/2] rockchip: dts: rk3229: remove dram channel info   Philipp Tomsich
    • [U-Boot] [U-Boot, v4, 2/2] rockchip: dts: rk3229: remove dram channel info   Philipp Tomsich
    • [U-Boot] [U-Boot, v4, 2/2] rockchip: dts: rk3229: remove dram channel info   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: clk: fix typo in rk322x clock driver   Kever Yang
  • [U-Boot] rockchip: clk: fix typo in rk322x clock driver   Philipp Tomsich
  • [U-Boot] rockchip: clk: fix typo in rk322x clock driver   Philipp Tomsich
  • [U-Boot] rockchip: clk: fix typo in rk322x clock driver   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: rk3036: fix grf macro define   Kever Yang
  • [U-Boot] rockchip: rk3036: fix grf macro define   Philipp Tomsich
  • [U-Boot] rockchip: rk3036: fix grf macro define   Philipp Tomsich
  • [U-Boot] rockchip: rk3036: fix grf macro define   Philipp Tomsich
• [U-Boot] [PATCH] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters   Stefan Roese
  • [U-Boot] [PATCH] arm: mvebu: theadorable_debug_defconfig: Enable setexpr command   Stefan Roese
• [U-Boot] [PATCH] x86: theadorable-x86-xxx_defconfig: Enable setexpr command   Stefan Roese
• [U-Boot] [PATCH] rockchip: mkimage: add support for rk3128 soc   Kever Yang
  • [U-Boot] rockchip: mkimage: add support for rk3128 soc   Philipp Tomsich
  • [U-Boot] rockchip: mkimage: add support for rk3128 soc   Philipp Tomsich
  • [U-Boot] rockchip: mkimage: add support for rk3128 soc   Philipp Tomsich
• [U-Boot] [GIT PULL] u-boot-sunxi/master   Maxime Ripard
  • [U-Boot] [GIT PULL] u-boot-sunxi/master   Tom Rini
    • [U-Boot] [GIT PULL] u-boot-sunxi/master   Maxime Ripard
      • [U-Boot] [GIT PULL] u-boot-sunxi/master   Tom Rini
      • [U-Boot] [GIT PULL] u-boot-sunxi/master   Maxime Ripard
      • [U-Boot] [GIT PULL] u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH 0/8] rockchip: add new SoC support for RK3128   Kever Yang
  • [U-Boot] [PATCH 1/8] rockchip: rk3128: add device tree file   Kever Yang
    • [U-Boot] [U-Boot,1/8] rockchip: rk3128: add device tree file   Philipp Tomsich
  • [U-Boot] [PATCH 2/8] rockchip: rk3128: add soc basic support   Kever Yang
  • [U-Boot] [PATCH 3/8] rockchip: rk3128: add clock driver   Kever Yang
  • [U-Boot] [PATCH 4/8] rockchip: rk3128: add pinctrl driver   Kever Yang
  • [U-Boot] [PATCH 5/8] rockchip: rk3128: add sysreset driver   Kever Yang
    • [U-Boot] [U-Boot,5/8] rockchip: rk3128: add sysreset driver   Philipp Tomsich
  • [U-Boot] [PATCH 6/8] rockchip: rk3128: add evb-rk3128 support   Kever Yang
  • [U-Boot] [PATCH 7/8] rockchip: rk3128: add defconfig for evb-rk3128   Kever Yang
  • [U-Boot] [PATCH 8/8] rockchip: rk3128: add sdram driver   Kever Yang
• [U-Boot] [PATCH 1/1] sunxi: Fix A20-OLinuXino-MICRO dts for LAN8710   Maxime Ripard
  • [U-Boot] [PATCH 1/1] sunxi: Fix A20-OLinuXino-MICRO dts for LAN8710   Stefan Mavrodiev
  • [U-Boot] [PATCH 1/1] sunxi: Fix A20-OLinuXino-MICRO dts for LAN8710   Stefan Mavrodiev
    • [U-Boot] [PATCH 1/1] sunxi: Fix A20-OLinuXino-MICRO dts for LAN8710   Maxime Ripard
• [U-Boot] [PATCH v1 0/6] Update stm32x7 serial driver   patrice.chotard at st.com
  • [U-Boot] [PATCH v1 2/6] serial: stm32x7: remove stm32f7-usart and stm32h7-usart compatible   patrice.chotard at st.com
  • [U-Boot] [PATCH v1 0/6] Update stm32x7 serial driver   Vikas MANOCHA
• [U-Boot] [PATCH v1 1/6] serial: stm32x7: cleanup code   patrice.chotard at st.com
  • [U-Boot] [PATCH v1 1/6] serial: stm32x7: cleanup code   Bo Shen
    • [U-Boot] [PATCH v1 1/6] serial: stm32x7: cleanup code   Patrice CHOTARD
• [U-Boot] [PATCH v1 3/6] serial: stm32x7: prepare the ground to STM32F4 support   patrice.chotard at st.com
  • [U-Boot] [PATCH v1 3/6] serial: stm32x7: prepare the ground to STM32F4 support   Bo Shen
    • [U-Boot] [PATCH v1 3/6] serial: stm32x7: prepare the ground to STM32F4 support   Patrice CHOTARD
• [U-Boot] [PATCH v1 4/6] serial: stm32x7: add fifo support for STM32H7   patrice.chotard at st.com
• [U-Boot] [PATCH v1 5/6] serial: stm32x7: add STM32F4 support   patrice.chotard at st.com
  • [U-Boot] [PATCH v1 5/6] serial: stm32x7: add STM32F4 support   Bo Shen
    • [U-Boot] [PATCH v1 5/6] serial: stm32x7: add STM32F4 support   Patrice CHOTARD
      • [U-Boot] [PATCH v1 5/6] serial: stm32x7: add STM32F4 support   Bo Shen
• [U-Boot] [PATCH v1 6/6] serial: stm32x7: remove useless CONFIG_CLK and OF_CONTROL flag   patrice.chotard at st.com
• [U-Boot] ClearFog base USB keyboard   Влад Мао
• [U-Boot] [PATCH 1/4] mx6: soc: Include <asm/bootm.h> header file   Diego Dorta
  • [U-Boot] [PATCH 2/4] mx6sabresd: Include <asm/mach-imx/spi.h> header file   Diego Dorta
  • [U-Boot] [PATCH 3/4] usb: ehci-ci: Add a prototype for board_ehci_power()   Diego Dorta
  • [U-Boot] [PATCH 4/4] mx6sabresd: Include <usb/ehci-ci.h> header file   Diego Dorta
• [U-Boot] imx6qp wandboard getting stuck in U-Boot   Fabio Estevam
  • [U-Boot] imx6qp wandboard getting stuck in U-Boot   Fabio Estevam
    • [U-Boot] imx6qp wandboard getting stuck in U-Boot   Fabio Estevam
• [U-Boot] [PATCH v3 1/2] wandboard: Add support for the latest revd1 revision   Fabio Estevam
  • [U-Boot] [PATCH v3 2/2] wandboard: Add support for the MX6QP variant   Fabio Estevam
• [U-Boot] [PATCH v2 0/5] rk3288: Falcon mode support   Chakra Divi
  • [U-Boot] [PATCH v2 1/5] armv7: Move L2CTLR read/write to common   Chakra Divi
    • [U-Boot] [U-Boot, v2, 1/5] armv7: Move L2CTLR read/write to common   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 1/5] armv7: Move L2CTLR read/write to common   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 1/5] armv7: Move L2CTLR read/write to common   Philipp Tomsich
  • [U-Boot] [PATCH v2 2/5] armv7: rk3288: Move configure_l2ctlr to common   Chakra Divi
    • [U-Boot] [U-Boot, v2, 2/5] armv7: rk3288: Move configure_l2ctlr to common   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 2/5] armv7: rk3288: Move configure_l2ctlr to common   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 2/5] armv7: rk3288: Move configure_l2ctlr to common   Philipp Tomsich
  • [U-Boot] [PATCH v2 3/5] rk3288: vyasa: Add TPL support   Chakra Divi
    • [U-Boot] [U-Boot,v2,3/5] rk3288: vyasa: Add TPL support   Philipp Tomsich
    • [U-Boot] [U-Boot,v2,3/5] rk3288: vyasa: Add TPL support   Philipp Tomsich
  • [U-Boot] [PATCH v2 4/5] rk3288: vyasa: Add falcon mode support   Chakra Divi
    • [U-Boot] [U-Boot, v2, 4/5] rk3288: vyasa: Add falcon mode support   Philipp Tomsich
  • [U-Boot] [PATCH v2 5/5] rk3288: spl: Add dram_init_banksize   Chakra Divi
    • [U-Boot] [U-Boot,v2,5/5] rk3288: spl: Add dram_init_banksize   Philipp Tomsich
• [U-Boot] [PATCH] mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig   Fabio Estevam
  • [U-Boot] [PATCH] mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig   Peng Fan
• [U-Boot] [PATCH 1/1] evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSET   Heinrich Schuchardt
  • [U-Boot] [U-Boot, 1/1] evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSET   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/1] evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSET   Philipp Tomsich
  • [U-Boot] [U-Boot, 1/1] evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSET   Philipp Tomsich
• [U-Boot] [PATCH 1/1] rockchip: rk3399: spl: implicit declaration back_to_bootrom   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] rockchip: rk3399: spl: implicit declaration back_to_bootrom   Heinrich Schuchardt
    • [U-Boot] [PATCH 1/1] rockchip: rk3399: spl: implicit declaration back_to_bootrom   Dr. Philipp Tomsich
• [U-Boot] Rainbow Screen of Death - Raspberry PI Current u-boot master   Duncan Hare
• [U-Boot] [PATCH V2 1/2] pinctrl: rmobile: Add pinconf to Renesas RCar pincontrol driver   Marek Vasut
  • [U-Boot] [PATCH 2/2] ARM: rmobile: Enable pinconf   Marek Vasut
• [U-Boot] [PATCH 1/1] rockchip: provide installation instruction for Firefly-RK3399.   Heinrich Schuchardt
• [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()   Bin Meng
  • [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()   Marek Vasut
    • [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()   Bin Meng
      • [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()   Marek Vasut
      • [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()   Bin Meng
      • [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()   Marek Vasut
• [U-Boot] Ethernet problem with u-boot for APF27   Vincent P
  • [U-Boot] Ethernet problem with u-boot for APF27   Fabio Estevam
  • [U-Boot] Ethernet problem with u-boot for APF27   Vincent Paratte
• [U-Boot] [GIT PULL v2] u-boot-sunxi/master   Maxime Ripard
  • [U-Boot] [GIT PULL v2] u-boot-sunxi/master   Tom Rini
    • [U-Boot] [GIT PULL v2] u-boot-sunxi/master   Maxime Ripard
      • [U-Boot] [GIT PULL v2] u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH] cmd/fdt.c align data buffer to avoid unaligned word access   Bernhard Messerklinger
• [U-Boot] [PATCH] rockchip: rk322x: fix pd_bus hclk/pclk   Kever Yang
  • [U-Boot] rockchip: rk322x: fix pd_bus hclk/pclk   Philipp Tomsich
  • [U-Boot] rockchip: rk322x: fix pd_bus hclk/pclk   Philipp Tomsich
  • [U-Boot] rockchip: rk322x: fix pd_bus hclk/pclk   Philipp Tomsich
• [U-Boot] [PATCH] mmc: sdhci-cadence: set timing mode register depending on frequency   Masahiro Yamada
  • [U-Boot] [PATCH] mmc: sdhci-cadence: set timing mode register depending on frequency   Jaehoon Chung
• [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()   Simon Glass
  • [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()   Dr. Philipp Tomsich
    • [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()   Dr. Philipp Tomsich
      • [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()   Tom Rini
      • [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()   Dr. Philipp Tomsich
      • [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()   Tom Rini
  • [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()   Bin Meng
• [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer   Masahiro Yamada
  • [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer   Marek Vasut
    • [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer   Masahiro Yamada
      • [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer   Marek Vasut
      • [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer   Tom Rini
• [U-Boot] [PATCH v3 0/7] Enable falcon boot for LS1043ARDB   York Sun
• [U-Boot] [PATCH v3 1/7] spl: fix assignment of board info to global data   York Sun
• [U-Boot] [PATCH v3 2/7] cmd: spl: fix compiling error when CONFIG_CMD_SPL_WRITE_SIZE not defined   York Sun
• [U-Boot] [PATCH v3 3/7] armv8: fsl-layerscape: Avoid running dram_init_banksize again   York Sun
• [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot   York Sun
  • [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot   Łukasz Majewski
    • [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot   York Sun
      • [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot   Łukasz Majewski
      • [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot   York Sun
• [U-Boot] [PATCH v3 5/7] armv8: layerscape: Enable falcon boot   York Sun
  • [U-Boot] [PATCH v3 5/7] armv8: layerscape: Enable falcon boot   Łukasz Majewski
    • [U-Boot] [PATCH v3 5/7] armv8: layerscape: Enable falcon boot   York Sun
• [U-Boot] [PATCH v3 6/7] armv8: ls1043ardb: Enable spl_board_init() function   York Sun
• [U-Boot] [PATCH v3 7/7] armv8: ls1043ardb_sdcard: prepare falcon boot   York Sun
• [U-Boot] [PATCH] ls1021aiot: Move CONFIG_CMD_BOOTZ to Kconfig   Fabio Estevam
• [U-Boot] [PATCH 1/2] icore: configs: Fix merge conflict issue   Chakra Divi
  • [U-Boot] [PATCH 2/2] icorem6_rqs: env: Return mmc devno   Chakra Divi
• [U-Boot] [PATCH] scripts: Move Kconfig contents to cmd/Kconfig   Sam Protsenko
  • [U-Boot] [PATCH] scripts: Move Kconfig contents to cmd/Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] topic_miami: Remove CONFIG_CMD_BOOTZ undef   Fabio Estevam
• [U-Boot] Patman - Submitting to mailing list   Duncan Hare
  • [U-Boot] Patman - Submitting to mailing list   Chris Packham
  • [U-Boot] Patman - Submitting to mailing list   Łukasz Majewski
• [U-Boot] [PATCH v4 4/7] drivers/i2c/muxes/pca954x: Add pca9547 I2C mux support   Chris Packham
• [U-Boot] [PATCH] i2c: muxes: pca954x: look up width from chip_desc   Chris Packham
  • [U-Boot] [PATCH] i2c: muxes: pca954x: look up width from chip_desc   Marek Behún
  • [U-Boot] [PATCH] i2c: muxes: pca954x: look up width from chip_desc   Marek Behún
    • [U-Boot] [PATCH] i2c: muxes: pca954x: look up width from chip_desc   Chris Packham
• [U-Boot] [PATCH v2] linux/bitfield.h: import <linux/bitfield.h> from Linux 4.13   Masahiro Yamada
• [U-Boot] [PATCH v2] rockchip: rk3188: ram: add support for 16bit row address   Kever Yang
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master (take 2)   Jaehoon Chung
  • [U-Boot] [GIT PULL] Please pull u-boot-mmc master (take 2)   Tom Rini
• [U-Boot] [PATCH] dm: replace dm_dbg() with pr_debug()   Masahiro Yamada
• [U-Boot] Debugging SPL   Goldschmidt Simon
• [U-Boot] [PATCH] Revert "sunxi: imply USB_GADGET"   Icenowy Zheng
  • [U-Boot] [PATCH] Revert "sunxi: imply USB_GADGET"   Maxime Ripard
• [U-Boot] [PATCH 001/080] mpc8308rdb: Fix style violation   Mario Six
  • [U-Boot] [PATCH 002/080] mpc83xx: spd_sdram: Fix whitespace style violations   Mario Six
    • [U-Boot] [PATCH 002/080] mpc83xx: spd_sdram: Fix whitespace style violations   Wolfgang Denk
  • [U-Boot] [PATCH 005/080] lib: fdtdec: Fix whitespace style violations   Mario Six
  • [U-Boot] [PATCH 006/080] lib: fdtdec: Fix some style violations   Mario Six
  • [U-Boot] [PATCH 007/080] core: ofnode: Fix style violations   Mario Six
  • [U-Boot] [PATCH 008/080] core: read: Fix style violations   Mario Six
  • [U-Boot] [PATCH 009/080] core: Add {ofnode, dev}_translate_address functions   Mario Six
  • [U-Boot] [PATCH 010/080] core: Make device_is_compatible live-tree compatible   Mario Six
  • [U-Boot] [PATCH 011/080] clk: clk-uclass: Fix style violations   Mario Six
  • [U-Boot] [PATCH 012/080] clk: clk_fixed_rate: Fix style violation   Mario Six
  • [U-Boot] [PATCH 013/080] clk: Remove superfluous gd declarations   Mario Six
  • [U-Boot] [PATCH 015/080] spi: Remove obsolete spi_base_setup_slave_fdt   Mario Six
  • [U-Boot] [PATCH 017/080] spi: Remove spi_setup_slave_fdt   Mario Six
  • [U-Boot] [PATCH 018/080] spi: Remove CONFIG_OF_SPI_FLASH   Mario Six
  • [U-Boot] [PATCH 019/080] spi: sf_probe: Fix style violations   Mario Six
  • [U-Boot] [PATCH 020/080] spi: spi-uclass: Fix style violations   Mario Six
  • [U-Boot] [PATCH 021/080] sf_probe: Merge spi_flash_probe_tail into spi_flash_probe   Mario Six
  • [U-Boot] [PATCH 022/080] net: tsec: Fix style violations   Mario Six
  • [U-Boot] [PATCH 023/080] net: tsec: Fix memory leak in error path   Mario Six
  • [U-Boot] [PATCH 024/080] net: tsec: Make live-tree compatible   Mario Six
  • [U-Boot] [PATCH 025/080] i2c: fsl_i2c: Fix style violations   Mario Six
  • [U-Boot] [PATCH 026/080] i2c: fsl_i2c: Remove inline declarations   Mario Six
  • [U-Boot] [PATCH 027/080] i2c: fsl_i2c: Make live-tree compatible   Mario Six
  • [U-Boot] [PATCH 028/080] gpio: pca953x_gpio: Fix style violations   Mario Six
  • [U-Boot] [PATCH 029/080] gpio: pca953x_gpio: Make live-tree compatible   Mario Six
  • [U-Boot] [PATCH 030/080] serial: ns16550: Fix style violation   Mario Six
  • [U-Boot] [PATCH 031/080] serial: ns16550: Fix address translation   Mario Six
  • [U-Boot] [PATCH 032/080] gdsys: Post ppc4xx removal cleanup   Mario Six
  • [U-Boot] [PATCH 033/080] net: phy: marvell: Fix style violations   Mario Six
  • [U-Boot] [PATCH 034/080] net: phy: marvell 88e151x: Fix handling of bare RGMII interface type   Mario Six
  • [U-Boot] [PATCH 035/080] cfi_flash: Fix space between function name and parenthesis   Mario Six
  • [U-Boot] [PATCH 036/080] cfi_flash: Fix style of pointer declarations   Mario Six
  • [U-Boot] [PATCH 037/080] cfi_flash: Fix Parenthesis spacing   Mario Six
  • [U-Boot] [PATCH 038/080] cfi_flash: Fix whitespace with casting   Mario Six
  • [U-Boot] [PATCH 039/080] cfi_flash: Fix indent of case statements   Mario Six
  • [U-Boot] [PATCH 040/080] cfi_flash: Fix spacing around casts/operators   Mario Six
  • [U-Boot] [PATCH 041/080] cfi_flash: Fix missing/superfluous lines   Mario Six
  • [U-Boot] [PATCH 042/080] cfi_flash: Remove braces for single-statement blocks   Mario Six
  • [U-Boot] [PATCH 043/080] cfi_flash: Fix logical continuations   Mario Six
  • [U-Boot] [PATCH 044/080] cfi_flash: Use __func__ macro instead of function name   Mario Six
  • [U-Boot] [PATCH 045/080] cfi_flash: Fix comment style   Mario Six
  • [U-Boot] [PATCH 046/080] cfi_flash: Remove unnecessary braces   Mario Six
  • [U-Boot] [PATCH 047/080] cfi_flash: Add missing braces in blocks   Mario Six
  • [U-Boot] [PATCH 048/080] cfi_flash: Fix spelling of "Unknown"   Mario Six
  • [U-Boot] [PATCH 049/080] cfi_flash: Fix else after break   Mario Six
  • [U-Boot] [PATCH 050/080] cfi_flash: Fix placement of brace   Mario Six
  • [U-Boot] [PATCH 051/080] cfi_flash: Remove return from void function   Mario Six
  • [U-Boot] [PATCH 052/080] cfi_flash: Reduce the scope of some variables   Mario Six
    • [U-Boot] [PATCH 052/080] cfi_flash: Reduce the scope of some variables   Masahiro Yamada
  • [U-Boot] [PATCH 053/080] cfi_flash: Remove assignments from if conditions   Mario Six
  • [U-Boot] [PATCH 054/080] cfi_flash: Use u8 pointers instead of void pointers   Mario Six
  • [U-Boot] [PATCH 055/080] cfi_flash: Fix strings split across lines   Mario Six
  • [U-Boot] [PATCH 056/080] cfi_flash: Rename camel-case variables   Mario Six
  • [U-Boot] [PATCH 057/080] flash: Fix spelling of "ERR_TIMOUT"   Mario Six
  • [U-Boot] [PATCH 058/080] cfi_flash: Bound-check index before array access   Mario Six
  • [U-Boot] [PATCH 059/080] cfi_flash: Fix long lines   Mario Six
  • [U-Boot] [PATCH 060/080] cfi_flash: Fix indention   Mario Six
  • [U-Boot] [PATCH 061/080] cfi_flash: Always define cfi_flash_num_flash_banks   Mario Six
  • [U-Boot] [PATCH 062/080] mtd: cfi_flash: Make live-tree compatible   Mario Six
  • [U-Boot] [PATCH 063/080] gpio: mpc85xx_gpio: Fix style violations   Mario Six
  • [U-Boot] [PATCH 064/080] gpio: mpc85xx: Rename driver file to mpc8xxx   Mario Six
  • [U-Boot] [PATCH 065/080] gpio: mpc8xxx: Rename Kconfig option, structures, and functions   Mario Six
  • [U-Boot] [PATCH 066/080] gpio: mpc8xxx: Make compatible with more SoCs   Mario Six
  • [U-Boot] [PATCH 067/080] mpc83xx: Prepare usage of DM gpio driver   Mario Six
  • [U-Boot] [PATCH 068/080] gpio: mpc8xxx: Make live-tree compatible   Mario Six
  • [U-Boot] [PATCH 069/080] cmd: mdio: Fix style violations   Mario Six
  • [U-Boot] [PATCH 070/080] common: board_f: Fix style violations   Mario Six
  • [U-Boot] [PATCH 071/080] common: board_r: Fix style violations   Mario Six
  • [U-Boot] [PATCH 072/080] gdsys: mpc8308: Fix style violations   Mario Six
  • [U-Boot] [PATCH 073/080] gdsys: mpc8308: Use shadow register for output GPIO values   Mario Six
  • [U-Boot] [PATCH 074/080] strider, hrcon: Reset CAT phy on CON2 module   Mario Six
  • [U-Boot] [PATCH 075/080] gdsys:phy: Adapt fixup_88e1518() to latest Release Notes   Mario Six
  • [U-Boot] [PATCH 076/080] phy: Fix style violations   Mario Six
  • [U-Boot] [PATCH 077/080] i2c: ihs_i2c: Prepare DM conversion   Mario Six
  • [U-Boot] [PATCH 078/080] i2c: ihs_i2c: Make DM compatible   Mario Six
  • [U-Boot] [PATCH 079/080] i2c: ihs_i2c: Factor out send_buffer method   Mario Six
  • [U-Boot] [PATCH 080/080] clk: Makefile: Sort entries alphabetically   Mario Six
• [U-Boot] [PATCH 003/080] mpc83xx: spd_sdram: Fix style violations   Mario Six
• [U-Boot] [PATCH 004/080] include: dm: Fix 'devioe'/'devuce' typos   Mario Six
• [U-Boot] [PATCH 014/080] spi: Fix style violation and improve code   Mario Six
• [U-Boot] [PATCH 016/080] spi: Remove spi_flash_probe_fdt   Mario Six
• [U-Boot] [PATCH] sandbox: Add clrbits/setbits macros   Tom Rini
• [U-Boot] [PATCH] net: phy: marvell: Add functions to read PHY's extended registers   Lukasz Majewski
• [U-Boot] [PATCH v2 00/10] rockchip: puma-rk3399: support 'same-as-spl' for boot-order and always power-up eMMC/SPI   Philipp Tomsich
  • [U-Boot] [PATCH v2 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()   Philipp Tomsich
  • [U-Boot] [PATCH v2 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order   Philipp Tomsich
  • [U-Boot] [PATCH v2 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()   Philipp Tomsich
  • [U-Boot] [PATCH v2 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order   Philipp Tomsich
  • [U-Boot] [PATCH v2 07/10] rockchip: puma-rk3399: update board_init()   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 07/10] rockchip: puma-rk3399: update board_init()   Philipp Tomsich
  • [U-Boot] [PATCH v2 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE   Philipp Tomsich
  • [U-Boot] [PATCH v2 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig   Philipp Tomsich
  • [U-Boot] [PATCH v2 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL   Philipp Tomsich
    • [U-Boot] [U-Boot, v2, 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL   Philipp Tomsich
• [U-Boot] [PATCH v2 01/10] rockchip: rk3399: make spl_board_init board-specific   Philipp Tomsich
  • [U-Boot] [U-Boot, v2, 01/10] rockchip: rk3399: make spl_board_init board-specific   Philipp Tomsich
• [U-Boot] [PATCH v2 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source   Philipp Tomsich
  • [U-Boot] [U-Boot, v2, 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source   Philipp Tomsich
• [U-Boot] [PATCH] cmd: Make CMD_LZMA / CMD_UNZIP default y if CMD_BOOTI   Tom Rini
• [U-Boot] [PATCH] wget and enough TCP stack for fast netboot   Duncan Hare
• [U-Boot] [PATCH 1/2] mx25pdk: Use generic filesystem commands   Otavio Salvador
  • [U-Boot] [PATCH 2/2] mx25pdk: Remove duplicated define   Otavio Salvador
• [U-Boot] [PATCH] dm: video: make ANSI escape sequence support optional   Anatolij Gustschin
  • [U-Boot] [PATCH] dm: video: make ANSI escape sequence support optional   Rob Clark
• [U-Boot] booting sunxi in falcon mode   Bjørnar Ness
• [U-Boot] fsl_esdhc driver is broken with DM   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] fs/fat: Fix 'CACHE: Misaligned operation at range' warnings   Tuomas Tynkkynen
  • [U-Boot] [PATCH v2 1/2] fs/fat: Fix 'CACHE: Misaligned operation at range' warnings   Tom Rini
• [U-Boot] [PATCH v2 2/2] fs/fat: Check malloc return values and fix memory leaks   Tuomas Tynkkynen
  • [U-Boot] [PATCH v2 2/2] fs/fat: Check malloc return values and fix memory leaks   Tom Rini