September 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Sep 1 03:03:39 CEST 2014
Ending: Tue Sep 30 23:23:27 CEST 2014
Messages: 2574

• [U-Boot] [PATCH] Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg so that mx6sabresd files are consolidated into one place.   Otavio Salvador
• [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Otavio Salvador
  • [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Nitin Garg
    • [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Otavio Salvador
      • [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Nitin Garg
      • [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Otavio Salvador
      • [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Fabio Estevam
      • [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Nitin Garg
      • [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Otavio Salvador
      • [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Fabio Estevam
      • [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Nitin Garg
  • [U-Boot] [PATCH] Add support for i.MX6SL EVK board keypad   Otavio Salvador
    • [U-Boot] [PATCH] Add i.MX6 CPU temperature sensor support   Fabio Estevam
      • [U-Boot] [PATCH v3 0/6] Introduce low-level debug for ARM architecture   Masahiro Yamada
      • [U-Boot] [PATCH v3 1/6] vexpress64: kconfig: consolidate CONFIG_TARGET_VEXPRESS_AEMV8A_SEMI   Masahiro Yamada
      • [U-Boot] [PATCH v3 1/6] vexpress64: kconfig: consolidate CONFIG_TARGET_VEXPRESS_AEMV8A_SEMI   Masahiro YAMADA
      • [U-Boot] [PATCH v3 2/6] kconfig: armv8: move CONFIG_ARM64 to Kconfig   Masahiro Yamada
      • [U-Boot] [PATCH v3 3/6] arm: debug: import debug files from Linux 3.16   Masahiro Yamada
      • [U-Boot] [PATCH v3 4/6] arm: debug: replace license blocks with SPDX   Masahiro Yamada
      • [U-Boot] [PATCH v3 5/6] arm: debug: add Kconfig entries for lowlevel debug   Masahiro Yamada
      • [U-Boot] [PATCH v3 5/6] arm: debug: add Kconfig entries for lowlevel debug   Simon Glass
      • [U-Boot] [PATCH v3 5/6] arm: debug: add Kconfig entries for lowlevel debug   Masahiro Yamada
      • [U-Boot] [PATCH v3 5/6] arm: debug: add Kconfig entries for lowlevel debug   Simon Glass
      • [U-Boot] [PATCH v3 5/6] arm: debug: add Kconfig entries for lowlevel debug   Tom Rini
      • [U-Boot] [PATCH v3 5/6] arm: debug: add Kconfig entries for lowlevel debug   Simon Glass
      • [U-Boot] [PATCH v3 6/6] arm: debug: adjust for U-Boot   Masahiro Yamada
  • [U-Boot] [PATCH] Add i.MX6 CPU temperature sensor support   Fabio Estevam
  • [U-Boot] [PATCH] imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent   Fabio Estevam
    • [U-Boot] [PATCH] imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent   Eric Nelson
      • [U-Boot] [PATCH] imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent   Guillaume Gardet
      • [U-Boot] [PATCH] imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent   Stefano Babic
• [U-Boot] [PATCH 3/3] kconfig: zynq: Add ZYBO board   Masahiro Yamada
  • [U-Boot] [PATCH 3/3] kconfig: zynq: Add ZYBO board   Michal Simek
  • [U-Boot] [PATCH v4 1/2] blackfin: convert blackfin board_f and board_r to use generic board init functions   Sonic Zhang
    • [U-Boot] [PATCH v4 1/2] blackfin: convert blackfin board_f and board_r to use generic board init functions   Michal Simek
• [U-Boot] [PATCH 2/2] USB: gadget: s3c: get rid of debug compile warning   Bo Shen
  • [U-Boot] [PATCH 2/2] USB: gadget: s3c: get rid of debug compile warning   Marek Vasut
    • [U-Boot] [imx PATCH v2] Add i.MX6 CPU temperature sensor support   Nitin Garg
    • [U-Boot] [imx PATCH v2] Add i.MX6 CPU temperature sensor support   Fabio Estevam
• [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
  • [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Scott Wood
• [U-Boot] [PATCH v2 1/2] sandbox: Update minor documentation changes   Simon Glass
• [U-Boot] [PATCH v2 1/2] sandbox: Update minor documentation changes   Masahiro Yamada
  • [U-Boot] [PATCH v2 1/2] sandbox: Update minor documentation changes   Simon Glass
• [U-Boot] [PATCH 2/2] doc: Use KBUILD_OUTPUT instead of BUILD_DIR   Masahiro Yamada
  • [U-Boot] [PATCH] tools/genboardscfg.py: improve performance more by using Kconfiglib   Simon Glass
    • [U-Boot] [PATCH] tools/genboardscfg.py: improve performance more by using Kconfiglib   Wolfgang Denk
    • [U-Boot] [PATCH] tools/genboardscfg.py: improve performance more by using Kconfiglib   Masahiro Yamada
• [U-Boot] tools-only build broken   Simon Glass
  • [U-Boot] tools-only build broken   Ian Campbell
    • [U-Boot] tools-only build broken   Simon Glass
      • [U-Boot] tools-only build broken   Otavio Salvador
      • [U-Boot] tools-only build broken   Simon Glass
      • [U-Boot] tools-only build broken   Otavio Salvador
      • [U-Boot] tools-only build broken   Simon Glass
      • [U-Boot] tools-only build broken   Otavio Salvador
      • [U-Boot] tools-only build broken   Marek Vasut
      • [U-Boot] uboot env in mmc partition   Hannes Petermaier
      • [U-Boot] uboot env in mmc partition   Naitik Amin
      • [U-Boot] uboot env in mmc partition   Hannes Petermaier
      • [U-Boot] uboot env in mmc partition   Naitik Amin
      • [U-Boot] uboot env in mmc partition   Hannes Petermaier
      • [U-Boot] uboot env in mmc partition   Peter A. Bigot
      • [U-Boot] uboot env in mmc partition   Hannes Petermaier
      • [U-Boot] uboot env in mmc partition   Peter A. Bigot
      • [U-Boot] uboot env in mmc partition   Naitik Amin
      • [U-Boot] uboot env in mmc partition   Sachin Verma
      • [U-Boot] uboot env in mmc partition   Naitik Amin
  • [U-Boot] [PATCH 6/8] xtensa: add support for the xtensa processor architecture [2/2]   Simon Glass
    • [U-Boot] [PATCH 6/8] xtensa: add support for the xtensa processor architecture [2/2]   Max Filippov
• [U-Boot] [PATCH 12/25] dm: spi: Add documentation on how to convert over SPI drivers   Simon Glass
  • [U-Boot] [PATCH 12/25] dm: spi: Add documentation on how to convert over SPI drivers   Jagan Teki
    • [U-Boot] [PATCH 12/25] dm: spi: Add documentation on how to convert over SPI drivers   Simon Glass
  • [U-Boot] [PATCH v9 0/14] Add some missing buildman features and deprecate MAKEALL   Simon Glass
    • [U-Boot] [PATCH v9 0/14] Add some missing buildman features and deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v9 11/14] buildman: Add an option to show which boards caused which errors   Simon Glass
  • [U-Boot] [PATCH v9 11/14] buildman: Add an option to show which boards caused which errors   Tom Rini
    • [U-Boot] [PATCH v9 11/14] buildman: Add an option to show which boards caused which errors   Simon Glass
• [U-Boot] buildman: suspect issue with patman tags   Simon Glass
  • [U-Boot] How to recognize need for new configuration   Simon Glass
• [U-Boot] use CONFIG_PRE_CONSOLE_BUFFER   Simon Glass
• [U-Boot] [PATCH] Move board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg to board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg so that mx6sabresd files are consolidated into one place.   Wolfgang Denk
• [U-Boot] [PATCH] Support i.MX6 High Assurance Boot (HAB) authentication of images   Wolfgang Denk
• [U-Boot] [PATCH] Add support for i.MX6SL EVK board keypad   Wolfgang Denk
• [U-Boot] [PATCH 1/2] dfu: Provide means to find difference between dfu-util -e and -R   Lukasz Majewski
• [U-Boot] [PATCH] usb: ci_udc: implement dfu_usb_get_reset   Lukasz Majewski
• [U-Boot] [patch 2/2] spl: Lightweight UBI and UBI fastmap support   Thomas Gleixner
• [U-Boot] [PATCH v2] sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE   Hans de Goede
  • [U-Boot] [PATCH v2] sunxi: Correct typo CONFIG_FTDFILE => CONFIG_FDTFILE   Ian Campbell
    • [U-Boot] [PATCH 0/2] SPI: mxc_spi: slave initialisation fixes   Markus Niebel
    • [U-Boot] [PATCH 1/2] SPI: mxc_spi: remove second reset from ECSPI config handler   Markus Niebel
    • [U-Boot] [PATCH 1/2] SPI: mxc_spi: remove second reset from ECSPI config handler   Stefano Babic
    • [U-Boot] [PATCH 1/2] SPI: mxc_spi: remove second reset from ECSPI config handler   Jagan Teki
    • [U-Boot] [PATCH 2/2] SPI: mxc_spi: delay initialisation until claim bus   Markus Niebel
    • [U-Boot] [PATCH 2/2] SPI: mxc_spi: delay initialisation until claim bus   Jagan Teki
    • [U-Boot] [PATCH 2/2] SPI: mxc_spi: delay initialisation until claim bus   Jagan Teki
• [U-Boot] [PATCH] kbuild: force to define __UBOOT__ in all the C sources   Heiko Schocher
• [U-Boot] [PATCH] sf: Add support for flag status register on Micron chips   B48286 at freescale.com
  • [U-Boot] [PATCH v2 0/3] Add ISC SPDX, import Kconfiglib and improve genboardscfg.py   Masahiro Yamada
  • [U-Boot] [PATCH v2 2/3] tools: Import Kconfiglib   Masahiro Yamada
  • [U-Boot] [PATCH v2 2/3] tools: Import Kconfiglib (Superseded !!!)   Masahiro Yamada
  • [U-Boot] [PATCH v2 2/3] tools: Import Kconfiglib (Superseded !!!)   Tom Rini
  • [U-Boot] [PATCH v2 2/3] tools: Import Kconfiglib (Superseded !!!)   Ulf Magnusson
  • [U-Boot] [PATCH v2 2/3] tools: Import Kconfiglib (Superseded !!!)   Tom Rini
  • [U-Boot] [U-Boot,v2,2/3] tools: Import Kconfiglib   Tom Rini
  • [U-Boot] [PATCH v2 1/3] SPDX: Add ISC SPDX-License-Identifier   Masahiro Yamada
  • [U-Boot] [U-Boot,v2,1/3] SPDX: Add ISC SPDX-License-Identifier   Tom Rini
  • [U-Boot] [PATCH v2 3/3] tools/genboardscfg.py: improve performance more with Kconfiglib   Masahiro Yamada
  • [U-Boot] [PATCH v2 3/3] tools/genboardscfg.py: improve performance more with Kconfiglib   Simon Glass
  • [U-Boot] [U-Boot, v2, 3/3] tools/genboardscfg.py: improve performance more with Kconfiglib   Tom Rini
• [U-Boot] [PATCH v2] kconfig: zynq: Add ZYBO board   Michal Simek
  • [U-Boot] [PATCH v2] kconfig: zynq: Add ZYBO board   Masahiro Yamada
• [U-Boot] [PATCH] microblaze: Fix printf size_t format related warnings (again...)   Michal Simek
  • [U-Boot] [PATCH v8 00/12] Add support to Odroid U3/X2   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 02/12] exynos: pinmux: fix the gpio names for exynos4x12 mmc   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 04/12] board:samsung: check the boot device and init the right mmc driver.   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 05/12] samsung: misc: add function for setting $dfu_alt_info   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 06/12] samsung:board: misc_init_r: call set_dfu_alt_info()   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 09/12] samsung: misc: use board specific functions to set env board info   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 10/12] odroid: add board file for Odroid X2/U3 based on Samsung Exynos4412   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 12/12] odroid: kconfig: add odroid_defconfig   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 00/12] Add support to Odroid U3/X2   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 00/12] Add support to Odroid U3/X2   Minkyu Kang
  • [U-Boot] [PATCH v8 01/12] samsung: misc: fix soc revision setting in the set_board_info()   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 03/12] arch:exynos: boot mode: add get_boot_mode(), code cleanup   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 07/12] arm:reset: call the reset_misc() before the cpu reset   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 08/12] samsung: board: enable support of multiple board types   Przemyslaw Marczak
  • [U-Boot] [PATCH v8 11/12] odroid: add odroid U3/X2 device tree description   Przemyslaw Marczak
  • [U-Boot] [PATCH] tools: imximage: Fix the maximum DCD size for mx53/mx6   Fabio Estevam
  • [U-Boot] [PATCH] tools: imximage: Fix the maximum DCD size for mx53/mx6   Nitin Garg
  • [U-Boot] [PATCH] tools: imximage: Fix the maximum DCD size for mx53/mx6   Tom Rini
  • [U-Boot] [PATCH] tools: imximage: Fix the maximum DCD size for mx53/mx6   Nitin Garg
  • [U-Boot] [PATCH] tools: imximage: Fix the maximum DCD size for mx53/mx6   Nitin Garg
  • [U-Boot] [PATCH] tools: imximage: Fix the maximum DCD size for mx53/mx6   Stefano Babic
  • [U-Boot] [PATCH] kgdb: Remove first_entry for kgdb   Peng Fan
  • [U-Boot] kgdb: Remove first_entry for kgdb   Tom Rini
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Nitin Garg
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Fabio Estevam
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Otavio Salvador
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Wolfgang Denk
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Otavio Salvador
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Wolfgang Denk
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Michael Trimarchi
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Otavio Salvador
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Wolfgang Denk
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Wolfgang Denk
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Fabio Estevam
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Eric Nelson
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Fabio Estevam
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Stefano Babic
  • [U-Boot] [PATCH v2] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board dir   Fabio Estevam
• [U-Boot] [PATCH 6/8] ARMv8: PSCI: Fixup the device tree for PSCI v0.2   Mark Rutland
  • [U-Boot] [PATCH 6/8] ARMv8: PSCI: Fixup the device tree for PSCI v0.2   Mark Rutland
  • [U-Boot] [PATCH 6/8] ARMv8: PSCI: Fixup the device tree for PSCI v0.2   Stuart Yoder
    • [U-Boot] [PATCH 6/8] ARMv8: PSCI: Fixup the device tree for PSCI v0.2   Mark Rutland
• [U-Boot] [PATCH] mpc5xxx: Add stub implementation of cache functions   Wolfgang Denk
  • [U-Boot] [PATCH] mpc5xxx: Add stub implementation of cache functions   Tom Rini
    • [U-Boot] [U-boot] [Patch] mtd: nand: davinci_nand: correct keystone RBL layout definition   Ivan Khoronzhuk
    • [U-Boot] [U-Boot, U-boot] mtd: nand: davinci_nand: correct keystone RBL layout definition   Tom Rini
    • [U-Boot] [PATCH 0/2 v3] Add support for mx6 onchip temperature sensor   nitin.garg at freescale.com
    • [U-Boot] [PATCH 1/2 v3] Add i.MX6 CPU temperature sensor support   nitin.garg at freescale.com
    • [U-Boot] [PATCH 1/2 v3] Add i.MX6 CPU temperature sensor support   Stefano Babic
    • [U-Boot] [PATCH 1/2 v3] Add i.MX6 CPU temperature sensor support   Nitin Garg
    • [U-Boot] [PATCH 2/2 v3] Enable SoC Temperature sensor for mx6 Sabre boards.   nitin.garg at freescale.com
• [U-Boot] Please pull u-boot-dm.git   Simon Glass
  • [U-Boot] Please pull u-boot-dm.git   Tom Rini
    • [U-Boot] [PATCH v2] sun7i: Add support for Olimex A20-OLinuXino-LIME   FUKAUMI Naoki
    • [U-Boot] [PATCH v2] sun7i: Add support for Olimex A20-OLinuXino-LIME   Ian Campbell
    • [U-Boot] [PATCH 1/5] iMX6Q/DL:SABREAUTO/SABRESD: Move DDR and FDT configs to defconfig   Ye.Li
    • [U-Boot] [PATCH 2/5] iMX6Q:SABREAUTO: Rename the imximage.cfg to mx6q.cfg   Ye.Li
    • [U-Boot] [PATCH 2/5] iMX6Q:SABREAUTO: Rename the imximage.cfg to mx6q.cfg   Fabio Estevam
    • [U-Boot] [PATCH 2/5] iMX6Q:SABREAUTO: Rename the imximage.cfg to mx6q.cfg   Li Ye-B37916
    • [U-Boot] [PATCH 3/5] iMX6DL:SABRESD: Add new DDR script   Ye.Li
    • [U-Boot] [PATCH 3/5] iMX6DL:SABRESD: Add new DDR script   Fabio Estevam
    • [U-Boot] [PATCH 3/5] iMX6DL:SABRESD: Add new DDR script   Li Ye-B37916
    • [U-Boot] [PATCH 4/5] iMX6Solo:SABRESD: Add the i.MX6Solo SABRESD board support   Ye.Li
    • [U-Boot] [PATCH 4/5] iMX6Solo:SABRESD: Add the i.MX6Solo SABRESD board support   Fabio Estevam
    • [U-Boot] [PATCH 4/5] iMX6Solo:SABRESD: Add the i.MX6Solo SABRESD board support   Li Ye-B37916
    • [U-Boot] [PATCH 4/5] iMX6Solo:SABRESD: Add the i.MX6Solo SABRESD board support   Otavio Salvador
    • [U-Boot] [PATCH 4/5] iMX6Solo:SABRESD: Add the i.MX6Solo SABRESD board support   Li Ye-B37916
    • [U-Boot] [PATCH 4/5] iMX6Solo:SABRESD: Add the i.MX6Solo SABRESD board support   Fabio Estevam
    • [U-Boot] [PATCH 4/5] iMX6Solo:SABRESD: Add the i.MX6Solo SABRESD board support   Li Ye-B37916
    • [U-Boot] [PATCH 5/5] iMX6Solo:SABREAUTO: Add the i.MX6Solo SABREAUTO board support   Ye.Li
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
  • [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
    • [U-Boot] [PATCH] mtd: atmel_nand: Disable subpage NAND write when using Atmel PMECC   Boris BREZILLON
    • [U-Boot] [PATCH] mtd: atmel_nand: Disable subpage NAND write when using Atmel PMECC   Josh Wu
    • [U-Boot] mtd: atmel_nand: Disable subpage NAND write when using Atmel PMECC   Andreas Bießmann
    • [U-Boot] [PATCH] ARM: at91sam9n12ek: convert to generic board support   Josh Wu
    • [U-Boot] ARM: at91sam9n12ek: convert to generic board support   Andreas Bießmann
    • [U-Boot] [PATCH] ARM: at91sam9rlek: convert to generic board support   Josh Wu
    • [U-Boot] ARM: at91sam9rlek: convert to generic board support   Andreas Bießmann
• [U-Boot] [PATCH v4] arm: tegra: initial support for apalis t30   Marcel Ziswiler
  • [U-Boot] [PATCH v4] arm: tegra: initial support for apalis t30   Masahiro YAMADA
    • [U-Boot] [PATCH v4] arm: tegra: initial support for apalis t30   Marcel Ziswiler
      • [U-Boot] [PATCH v3 0/6] Add support for Panasonic UniPhier SoCs/boards   Masahiro Yamada
      • [U-Boot] [PATCH v3 3/6] arm: uniphier: add UniPhier SoC support code   Masahiro Yamada
      • [U-Boot] [PATCH v3 4/6] arm: uniphier: add Kconfig and defconfig   Masahiro Yamada
      • [U-Boot] [PATCH v3 1/6] nand: denali: add Denali NAND driver for SPL   Masahiro Yamada
      • [U-Boot] [PATCH v3 2/6] serial: add UniPhier serial driver   Masahiro Yamada
      • [U-Boot] [PATCH v3 5/6] MAINTAINERS: add me as a maintainer of UniPhier platform   Masahiro Yamada
      • [U-Boot] [PATCH v3 6/6] git-mailrc: add me as a maintainer of UniPhier platform   Masahiro Yamada
  • [U-Boot] Fwd: Recommended SH toolchain   Vasili Galka
    • [U-Boot] Fwd: Recommended SH toolchain   Tom Rini
      • [U-Boot] [PATCH v3 0/25] Add Marvell Armada XP MV78460 SoC support   Stefan Roese
      • [U-Boot] [PATCH v3 01/25] sf: Add M25PX64 SPI NOR flash ID   Stefan Roese
      • [U-Boot] [PATCH v3 02/25] arm: kirkwood: spi.h: Add some missing parenthesis   Stefan Roese
      • [U-Boot] [PATCH v3 03/25] spi: kirkwood_spi.c: Some fixes and cleanup   Stefan Roese
      • [U-Boot] [PATCH v3 04/25] spi: kirkwood_spi.c: Make global variable static   Stefan Roese
      • [U-Boot] [PATCH v3 05/25] spi: kirkwood_spi.c: cosmetic: Fix minor coding style issues   Stefan Roese
      • [U-Boot] [PATCH v3 06/25] arm: kirkwood: Move some SoC files into new arch/arm/mvebu-common   Stefan Roese
      • [U-Boot] [PATCH v3 07/25] arm: marvell: Move arch/kirkwood.h to arch/soc.h   Stefan Roese
      • [U-Boot] [PATCH v3 08/25] arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h   Stefan Roese
      • [U-Boot] [PATCH v3 09/25] arm: marvell: Rework timer.c to make it usable for other MVEBU platforms   Stefan Roese
      • [U-Boot] [PATCH v3 10/25] arm: mvebu: Add common mbus functions to use on Marvell SoCs   Stefan Roese
      • [U-Boot] [PATCH v3 11/25] spi: kirkwood_spi.c: Compile MPP (pin-mux) only for kirkwood SoC's   Stefan Roese
      • [U-Boot] [PATCH v3 12/25] arm: marvell: Extract kirkwood gpio functions into new common file gpio.c   Stefan Roese
      • [U-Boot] [PATCH v3 13/25] spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE   Stefan Roese
      • [U-Boot] [PATCH v3 13/25] spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE   Jagan Teki
      • [U-Boot] [PATCH v3 14/25] arm: kirkwood: Change naming of dram functions from km_foo() to mvebu_foo()   Stefan Roese
      • [U-Boot] [PATCH v3 15/25] net: mvneta.c: Add support for the ethernet controller of the Marvell Armada XP SoC   Stefan Roese
      • [U-Boot] [PATCH v3 16/25] net: phy.h: Make PHY autonegotiation timeout configurable   Stefan Roese
      • [U-Boot] [PATCH v3 17/25] i2c: mvtwsi: Add support for Marvell Armada XP   Stefan Roese
      • [U-Boot] [PATCH v3 18/25] arm: armada-xp: Add basic support for Marvell Armada XP SoC   Stefan Roese
      • [U-Boot] [PATCH v3 19/25] arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP board   Stefan Roese
      • [U-Boot] [PATCH v3 20/25] arm: armada-xp: Add basic support for the maxBCM board   Stefan Roese
      • [U-Boot] [PATCH v3 21/25] arm: kirkwood: Remove some dead code from cpu.c   Stefan Roese
      • [U-Boot] [PATCH v3 22/25] tools/kwboot: Sync with latest barebox version to support Armada XP   Stefan Roese
      • [U-Boot] [PATCH v3 23/25] tools: Compile kwboot for Marvell Armada XP as those SoCs are now supported   Stefan Roese
      • [U-Boot] [PATCH v3 24/25] tools: kwbimage: Add image version 1 support for Armada XP / 370   Stefan Roese
      • [U-Boot] [PATCH v3 25/25] Makefile: Add CONFIG_BUILD_TARGET to automatically build an special image   Stefan Roese
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
    • [U-Boot] [U-Boot, v10, 11/14] buildman: Add an option to show which boards caused which errors   Tom Rini
      • [U-Boot] [U-Boot, v10, 11/14] buildman: Add an option to show which boards caused which errors   Simon Glass
      • [U-Boot] [U-Boot, v10, 11/14] buildman: Add an option to show which boards caused which errors   Simon Glass
• [U-Boot] [PATCH] omap3_beagle: Add boot script support to omap3 beagle board   Guillaume Gardet
  • [U-Boot] [PATCH] mtd: nand: omap_gpmc: Enable multiple NAND flash devices   Rostislav Lisovy
  • [U-Boot] mtd: nand: omap_gpmc: Enable multiple NAND flash devices   Tom Rini
  • [U-Boot] [PATCH] mtd: nand: omap_gpmc: Fix 'bit-flip' errors   Rostislav Lisovy
  • [U-Boot] mtd: nand: omap_gpmc: Fix 'bit-flip' errors   Tom Rini
• [U-Boot] [PATCH] kconfig: remove redundant "SPL" from CONFIG_SYS_EXTRA_OPTIONS   Ian Campbell
  • [U-Boot] [PATCH 04/25] dm: spi: Move cmd device code into its own function   Simon Glass
    • [U-Boot] [PATCH v2 14/40] i2c: tegra: Implement i2c_get_bus_num_fdt()   Simon Glass
• [U-Boot] [PATCH v2 1/3] stv0991 : Add basic stv0991 architecture support.   vikasm
  • [U-Boot] Please pull u-boot-arc/master   Tom Rini
  • [U-Boot] [ANN] U-Boot v2014.10-rc2 released   Tom Rini
    • [U-Boot] [ANN] U-Boot v2014.10-rc2 released   Wolfgang Denk
    • [U-Boot] [PATCH v3 0/3] add support for new arch stv0991   Vikas Manocha
    • [U-Boot] [PATCH v3 1/3] stv0991: Add basic stv0991 architecture support   Vikas Manocha
    • [U-Boot] [PATCH v3 2/3] stv0991: enable ethernet support   Vikas Manocha
    • [U-Boot] [PATCH v3 3/3] stv0991: default + misc command configs enabled   Vikas Manocha
    • [U-Boot] [PATCH v3 0/3] add support for new arch stv0991   vikasm
    • [U-Boot] [PATCH 0/2] fix issue with mmc partition management   Peter A. Bigot
    • [U-Boot] [PATCH 1/2] env_mmc: remove condition on call to mmc_switch_part   Peter A. Bigot
    • [U-Boot] [PATCH 1/2] env_mmc: remove condition on call to mmc_switch_part   Stephen Warren
    • [U-Boot] [PATCH 1/2] env_mmc: remove condition on call to mmc_switch_part   Peter A. Bigot
    • [U-Boot] [PATCH v2] env_mmc: correct fini partition to match init partition   Peter A. Bigot
    • [U-Boot] [PATCH v2] env_mmc: correct fini partition to match init partition   Stephen Warren
    • [U-Boot] [PATCH v2] env_mmc: correct fini partition to match init partition   Peter A. Bigot
    • [U-Boot] [PATCH v2] env_mmc: correct fini partition to match init partition   Stephen Warren
    • [U-Boot] [PATCH v2] env_mmc: correct fini partition to match init partition   Peter A. Bigot
    • [U-Boot] [PATCH v3] env_mmc: correct fini partition to match init partition   Peter A. Bigot
    • [U-Boot] [PATCH v3] env_mmc: correct fini partition to match init partition   Igor Grinberg
    • [U-Boot] [PATCH v3] env_mmc: correct fini partition to match init partition   Dmitry Lifshitz
    • [U-Boot] [PATCH 2/2] mmc: restore capacity when switching to partition 0   Peter A. Bigot
    • [U-Boot] [PATCH 2/2] mmc: restore capacity when switching to partition 0   Stephen Warren
    • [U-Boot] [PATCH 2/2] mmc: restore capacity when switching to partition 0   Peter A. Bigot
    • [U-Boot] [PATCH 2/2] mmc: restore capacity when switching to partition 0   Stephen Warren
    • [U-Boot] [PATCH 2/2] mmc: restore capacity when switching to partition 0   Peter A. Bigot
    • [U-Boot] [PATCH 2/2] mmc: restore capacity when switching to partition 0   Tom Rini
    • [U-Boot] [PATCH 0/2] fix issue with mmc partition management   Tom Rini
• [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Steve Rae
  • [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format   Tom Rini
  • [U-Boot] SPL broken on i.mx31 platforms   Benoît Thébaudeau
    • [U-Boot] SPL broken on i.mx31 platforms   Tom Rini
      • [U-Boot] SPL broken on i.mx31 platforms   Magnus Lilja
      • [U-Boot] SPL broken on i.mx31 platforms   Benoît Thébaudeau
      • [U-Boot] SPL broken on i.mx31 platforms   Magnus Lilja
      • [U-Boot] [PATCH v2] imx: Support i.MX6 High Assurance Boot authentication   Nitin Garg
• [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Scott Wood
  • [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
    • [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Chin Liang See
  • [U-Boot] [PATCH] nand/denali: Adding Denali NAND driver support   Chin Liang See
    • [U-Boot] [PATCH] kconfig: fix a bug of savedefconfig   Masahiro Yamada
    • [U-Boot] [PATCH] kconfig: fix a bug of savedefconfig   Simon Glass
    • [U-Boot] [PATCH] kconfig: fix another bug of savedefconfig   Masahiro Yamada
    • [U-Boot] [PATCH 1/4] iMX6Q:arm2: Add the kernel FDT Loading support   Ye.Li
    • [U-Boot] [PATCH 2/4] iMX6Q:arm2: Change the mmcroot and mmcpart env value   Ye.Li
    • [U-Boot] [PATCH 3/4] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board   Ye.Li
    • [U-Boot] [PATCH 4/4] iMX6Q/DL:arm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards   Ye.Li
    • [U-Boot] [PATCH 4/4] iMX6Q/DL:arm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards   Nitin Garg
    • [U-Boot] [PATCH 1/2] iMX6Q/DL:ARM2: Change to use generic board   Ye.Li
    • [U-Boot] [PATCH 1/2] iMX6Q/DL:ARM2: Change to use generic board   Nitin Garg
    • [U-Boot] [PATCH 2/2] iMX6SLEVK: Change to use generic board   Ye.Li
    • [U-Boot] [PATCH 2/2] iMX6SLEVK: Change to use generic board   Nitin Garg
    • [U-Boot] [PATCH] powerpc/b4860: Updated default hwconfig so as to enable only CPC2   Shaveta Leekha
    • [U-Boot] [PATCH v2 1/2] usb: eth: add ASIX AX88179 DRIVER   Rene Griessl
    • [U-Boot] [PATCH v2 1/2] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
    • [U-Boot] [PATCH v2 1/2] usb: eth: add ASIX AX88179 DRIVER   René Griessl
    • [U-Boot] [PATCH v2 1/2] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
    • [U-Boot] [PATCH v2 1/2] usb: eth: add ASIX AX88179 DRIVER   René Griessl
    • [U-Boot] [PATCH v2 1/2] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
    • [U-Boot] [PATCH v2 2/2] usb: eth: enable ASIX AX88179 DRIVER for Arndale5250 board   Rene Griessl
• [U-Boot] Force check of RSA-Signature   Ulf Bartel
  • [U-Boot] Force check of RSA-Signature   Simon Glass
    • [U-Boot] Force check of RSA-Signature   Wolfgang Denk
      • [U-Boot] Force check of RSA-Signature   Simon Glass
      • [U-Boot] [PATCH] cmd_mem: add static to internally used functions   Masahiro Yamada
      • [U-Boot] [PATCH] cmd_mem: add static to internally used functions   Simon Glass
      • [U-Boot] cmd_mem: add static to internally used functions   Tom Rini
• [U-Boot] uboot env in mmc partition   Stephen Warren
  • [U-Boot] [Suspected Spam] Re: uboot env in mmc partition   Naitik Amin
    • [U-Boot] [PATCH] AM335x: igep0033: Convert to generic board and use ti_am335x_common.h.   Enric Balletbo i Serra
    • [U-Boot] AM335x: igep0033: Convert to generic board and use ti_am335x_common.h.   Tom Rini
    • [U-Boot] uboot env in mmc partition   Naitik Amin
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Detlev Zundel
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Detlev Zundel
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Detlev Zundel
  • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Marek Vasut
    • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Scott Wood
      • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Marek Vasut
      • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Tom Rini
      • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Simon Glass
      • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Tom Rini
      • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Jagan Teki
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Detlev Zundel
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Przemyslaw Marczak
  • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Alexey Brodkin
    • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Marek Vasut
      • [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Alexey Brodkin
• [U-Boot] mini summit talk proposal: "Getting SoC vendors to work with upstream u-boot"   Detlev Zundel
  • [U-Boot] [PATCH v3 0/4] Implement "sparse format" for fastboot   Steve Rae
  • [U-Boot] [PATCH v3 1/4] add code to handle Android sparse image format   Steve Rae
  • [U-Boot] [PATCH v3 1/4] add code to handle Android sparse image format   Wolfgang Denk
  • [U-Boot] [U-Boot, v3, 1/4] add code to handle Android sparse image format   Tom Rini
  • [U-Boot] [PATCH v3 2/4] update code which handles Android sparse image format   Steve Rae
  • [U-Boot] [U-Boot, v3, 2/4] update code which handles Android sparse image format   Tom Rini
  • [U-Boot] [PATCH v3 3/4] cleanup code which handles the Android sparse image format   Steve Rae
  • [U-Boot] [PATCH v3 3/4] cleanup code which handles the Android sparse image format   Wolfgang Denk
  • [U-Boot] [PATCH v3 3/4] cleanup code which handles the Android sparse image format   Tom Rini
  • [U-Boot] [PATCH v3 3/4] cleanup code which handles the Android sparse image format   Lukasz Majewski
  • [U-Boot] [PATCH v3 3/4] cleanup code which handles the Android sparse image format   Tom Rini
  • [U-Boot] [U-Boot, v3, 3/4] cleanup code which handles the Android sparse image format   Tom Rini
  • [U-Boot] [PATCH v3 4/4] implement the Android sparse image format   Steve Rae
  • [U-Boot] [U-Boot, v3, 4/4] implement the Android sparse image format   Tom Rini
  • [U-Boot] [U-boot] [Patch 0/6] keystone2: add k2l SoC and k2l_evm board support   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 1/6] ARM: keystone2: add K2L device hardware definitions   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 2/6] keystone2: clock: add K2L clock definitions and commands   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 3/6] keystone2: msmc: add MSMC cache coherency support for K2L SOC   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 4/6] ARM: keystone2: spl: add K2L SoC support   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 5/6] keystone2: enable OSR clock domain for K2L SoC   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 6/6] keystone2: k2l-evm: add board support   Ivan Khoronzhuk
  • [U-Boot] [PATCH 0/2] Sync compiler*.h with Linux 3.16   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] compiler*.h: sync include/linux/compiler*.h with Linux 3.16   Masahiro Yamada
  • [U-Boot] [U-Boot, 1/2] compiler*.h: sync include/linux/compiler*.h with Linux 3.16   Tom Rini
  • [U-Boot] [PATCH 2/2] standalone: use GCC_VERSION defined in compiler-gcc.h   Masahiro Yamada
  • [U-Boot] [U-Boot, 2/2] standalone: use GCC_VERSION defined in compiler-gcc.h   Tom Rini
• [U-Boot] [PATCH v6] mx6: add support of multi-processor command   York Sun
  • [U-Boot] [PATCH v6] mx6: add support of multi-processor command   Gabriel Huau
• [U-Boot] [PATCH v6] mx6: add support of multi-processor command   York Sun
  • [U-Boot] [PATCH v6] mx6: add support of multi-processor command   Gabriel Huau
    • [U-Boot] U-boot-arm/master (and next) fast-forwarded to u-boot/master   Albert ARIBAUD
      • [U-Boot] [PATCH] patman: make run results better visible   Vadim Bendebury
      • [U-Boot] [PATCH] patman: make run results better visible   Doug Anderson
      • [U-Boot] [PATCH] patman: make run results better visible   Vadim Bendebury
      • [U-Boot] [PATCH] patman: make run results better visible   Doug Anderson
      • [U-Boot] [PATCH v2] patman: make run results better visible   Vadim Bendebury
      • [U-Boot] [PATCH v2] patman: make run results better visible   Doug Anderson
      • [U-Boot] [PATCH v2] patman: make run results better visible   Simon Glass
      • [U-Boot] [PATCH v2] patman: make run results better visible   Simon Glass
• [U-Boot] [RFC] mainline u-boot on socfpga   Pavel Machek
  • [U-Boot] [RFCv2] mainline u-boot on socfpga   Pavel Machek
    • [U-Boot] [RFCv2] mainline u-boot on socfpga   Michal Simek
    • [U-Boot] [RFCv2] mainline u-boot on socfpga   Chin Liang See
    • [U-Boot] [RFCv2] mainline u-boot on socfpga   Chin Liang See
      • [U-Boot] [RFCv2] mainline u-boot on socfpga   Pavel Machek
      • [U-Boot] [PATCH v2 0/4] Kconfig: Fix various bugs   Masahiro Yamada
      • [U-Boot] [PATCH v2 1/4] kconfig: fix savedefconfig to output empty defconfig   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 1/4] kconfig: fix savedefconfig to output empty defconfig   Tom Rini
      • [U-Boot] [PATCH v2 2/4] kconfig: fix whitespace handling bug of savedefconfig   Masahiro Yamada
      • [U-Boot] [PATCH v2 2/4] kconfig: fix whitespace handling bug of savedefconfig   Simon Glass
      • [U-Boot] [PATCH v2 2/4] kconfig: fix whitespace handling bug of savedefconfig   Masahiro YAMADA
      • [U-Boot] [U-Boot, v2, 2/4] kconfig: fix whitespace handling bug of savedefconfig   Tom Rini
      • [U-Boot] [PATCH v2 3/4] kconfig: fix savedefconfig to handle TPL correctly   Masahiro Yamada
      • [U-Boot] [PATCH v2 3/4] kconfig: fix savedefconfig to handle TPL correctly   Simon Glass
      • [U-Boot] [PATCH v2 3/4] kconfig: fix savedefconfig to handle TPL correctly   Simon Glass
      • [U-Boot] [U-Boot, v2, 3/4] kconfig: fix savedefconfig to handle TPL correctly   Tom Rini
      • [U-Boot] [PATCH v2 4/4] kconfig: fix a bug of "make config"   Masahiro Yamada
      • [U-Boot] [PATCH v2 4/4] kconfig: fix a bug of "make config"   Simon Glass
      • [U-Boot] [U-Boot,v2,4/4] kconfig: fix a bug of "make config"   Tom Rini
      • [U-Boot] [PATCH] kconfig: show an error message when defconfig is not found   Masahiro Yamada
      • [U-Boot] [PATCH] kconfig: show an error message when defconfig is not found   Stephen Warren
      • [U-Boot] [PATCH] common: fix include guards for CONFIG_MP   Gabriel Huau
      • [U-Boot] [PATCH] common: fix include guards for CONFIG_MP   York Sun
      • [U-Boot] common: fix include guards for CONFIG_MP   Tom Rini
• [U-Boot] [PATCH] common: fix include guards for CONFIG_MP   York Sun
  • [U-Boot] [PATCH 1/2] arm: Make reset position-independent   Benoît Thébaudeau
  • [U-Boot] [PATCH 1/2] arm: Make reset position-independent   Benoît Thébaudeau
  • [U-Boot] [PATCH 1/2] arm: Make reset position-independent   Benoît Thébaudeau
  • [U-Boot] [PATCH 1/2] arm: Make reset position-independent   Magnus Lilja
  • [U-Boot] [PATCH 1/2] arm: Make reset position-independent   Fabio Estevam
  • [U-Boot] [PATCH 1/2] arm: Make reset position-independent   Albert ARIBAUD
  • [U-Boot] [PATCH 2/2] arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/2] arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG   Albert ARIBAUD
  • [U-Boot] [PATCH v7 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
  • [U-Boot] [PATCH v3 0/4] introduce get_maintainer.pl   Simon Glass
    • [U-Boot] [PATCH v3 0/4] introduce get_maintainer.pl   Stefan Roese
      • [U-Boot] [PATCH v3 0/4] introduce get_maintainer.pl   Masahiro YAMADA
    • [U-Boot] [PATCH v3 0/4] introduce get_maintainer.pl   Daniel Schwierzeck
      • [U-Boot] [PATCH v3 0/4] introduce get_maintainer.pl   Simon Glass
      • [U-Boot] [PATCH v7 0/13] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
      • [U-Boot] [PATCH v7 01/13] dm: Move pre-reloc init earlier to cope with board_early_init_f()   Simon Glass
      • [U-Boot] [PATCH v7 01/13] dm: Move pre-reloc init earlier to cope with board_early_init_f()   Simon Glass
      • [U-Boot] [PATCH v7 02/13] Set up stdio earlier when using driver model   Simon Glass
      • [U-Boot] [PATCH v7 02/13] Set up stdio earlier when using driver model   Simon Glass
      • [U-Boot] [PATCH v7 03/13] dm: Make driver model available before board_init()   Simon Glass
      • [U-Boot] [PATCH v7 03/13] dm: Make driver model available before board_init()   Simon Glass
      • [U-Boot] [PATCH v7 04/13] dm: tegra: Set up a pre-reloc malloc()   Simon Glass
      • [U-Boot] [PATCH v7 04/13] dm: tegra: Set up a pre-reloc malloc()   Simon Glass
      • [U-Boot] [PATCH v7 05/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
      • [U-Boot] [PATCH v7 05/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
      • [U-Boot] [PATCH v7 05/13] tegra: Convert tegra GPIO driver to use driver model   Simon Glass
      • [U-Boot] [PATCH v7 06/13] exynos: dts: Convert /include/ to #include   Simon Glass
      • [U-Boot] [PATCH v7 07/13] exynos: Bring in pinctrl dts files from Linux kernel   Simon Glass
      • [U-Boot] [PATCH v7 08/13] exynos: dts: Remove unused pinctrl information to save space   Simon Glass
      • [U-Boot] [PATCH v7 09/13] exynos: dts: Adjust device tree files for U-Boot   Simon Glass
      • [U-Boot] [PATCH v7 10/13] exynos: Tidy up GPIO headers   Simon Glass
      • [U-Boot] [PATCH v7 11/13] exynos: Tidy up GPIO defines   Simon Glass
      • [U-Boot] [PATCH v7 12/13] exynos: Make sure that GPIOs are requested   Simon Glass
      • [U-Boot] [PATCH v7 13/13] exynos: gpio: Convert to driver model   Simon Glass
      • [U-Boot] [PATCH v7 0/13] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] buildman fails if branch specifier contains a'/'   Steve Rae
  • [U-Boot] buildman fails if branch specifier contains a'/'   Simon Glass
    • [U-Boot] [PATCH v3] imx: Support i.MX6 High Assurance Boot authentication   Nitin Garg
    • [U-Boot] [PATCH v3] imx: Support i.MX6 High Assurance Boot authentication   Stefano Babic
    • [U-Boot] [PATCH v3] imx: Support i.MX6 High Assurance Boot authentication   Nitin Garg
    • [U-Boot] [PATCH][v2] powerpc/b4860: Updated default hwconfig so as to enable only   Shaveta Leekha
    • [U-Boot] [PATCH][v2] powerpc/b4860: Updated default hwconfig so as to enable only   York Sun
• [U-Boot] [PATCH] cfi_flash: don't hide write/erase errors   Baruch Siach
  • [U-Boot] [PATCH] dfu, usb: set usb descriptor to values defined in dfu spec 1.1   Heiko Schocher
  • [U-Boot] [PATCH] dfu, usb: set usb descriptor to values defined in dfu spec 1.1   Marek Vasut
  • [U-Boot] [PATCH] dfu, usb: set usb descriptor to values defined in dfu spec 1.1   Heiko Schocher
  • [U-Boot] [PATCH] dfu, usb: set usb descriptor to values defined in dfu spec 1.1   Lukasz Majewski
  • [U-Boot] [PATCH] dfu, usb: set usb descriptor to values defined in dfu spec 1.1   Heiko Schocher
  • [U-Boot] [PATCH] dfu, usb: set usb descriptor to values defined in dfu spec 1.1   Marek Vasut
  • [U-Boot] [PATCH] dfu, usb: set usb descriptor to values defined in dfu spec 1.1   Heiko Schocher
  • [U-Boot] [PATCH] dfu, usb: set usb descriptor to values defined in dfu spec 1.1   Marek Vasut
  • [U-Boot] [PATCH] B4860QDS: Enable mac command support   Shaveta Leekha
  • [U-Boot] [PATCH] B4860QDS: Enable mac command support   York Sun
  • [U-Boot] VxWorks Booting using U-boot as Bootloader   Ashish Khetan
    • [U-Boot] VxWorks Booting using U-boot as Bootloader   Hannes Petermaier
      • [U-Boot] VxWorks Booting using U-boot as Bootloader   Ashish Khetan
      • [U-Boot] VxWorks Booting using U-boot as Bootloader   Hannes Petermaier
      • [U-Boot] VxWorks Booting using U-boot as Bootloader   Ashish Khetan
      • [U-Boot] [PATCH v2] kconfig: show an error message when defconfig is not found   Masahiro Yamada
      • [U-Boot] [PATCH v2] kconfig: show an error message when defconfig is not found   Stephen Warren
      • [U-Boot] [U-Boot, v2] kconfig: show an error message when defconfig is not found   Tom Rini
• [U-Boot] [U-boot] [Patch 2/6] ARM: keystone2: clock: add K2E clock support   Murali Karicheri
  • [U-Boot] [U-boot] [Patch 2/6] ARM: keystone2: clock: add K2E clock support   Ivan Khoronzhuk
    • [U-Boot] [PATCH v2 1/5] iMX6Q:arm2: Add the kernel FDT Loading support   Ye.Li
    • [U-Boot] [PATCH v2 2/5] iMX6Q:arm2: Change the mmcroot and mmcpart env value   Ye.Li
    • [U-Boot] [PATCH v2 4/5] iMX6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD reset   Ye.Li
    • [U-Boot] [PATCH v2 5/5] iMX6Q/DL:arm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards   Ye.Li
    • [U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board   Ye.Li
• [U-Boot] [PATCH] MAINTAINERS: update the maintainer of Arndale board   Masahiro YAMADA
  • [U-Boot] [PATCH] MAINTAINERS: update the maintainer of Arndale board   Minkyu Kang
  • [U-Boot] Kernel XIP   Camilo Andres Roca Duarte
    • [U-Boot] Kernel XIP   Wolfgang Denk
      • [U-Boot] [U-boot] [Patch] ARM: keystone: ddr3: workaround for ddr3a/3b memory issue   Ivan Khoronzhuk
      • [U-Boot] [PATCH] buildman: fix typos of --dry-run help message   Masahiro Yamada
      • [U-Boot] [PATCH] buildman: fix typos of --dry-run help message   Simon Glass
      • [U-Boot] [PATCH] powerpc/mpc85xx: Serdes protocol "00" is supported   Ebony Zhu
      • [U-Boot] [PATCH] powerpc/mpc85xx: Serdes protocol "00" is supported   York Sun
      • [U-Boot] [PATCH 0/2] A little improvement of Kbuild script and Makefile cleanup   Masahiro Yamada
      • [U-Boot] [PATCH 1/2] scripts/Makefile.clean: clean also $(extra-m) and $(extra-)   Masahiro Yamada
      • [U-Boot] [U-Boot, 1/2] scripts/Makefile.clean: clean also $(extra-m) and $(extra-)   Tom Rini
      • [U-Boot] [PATCH 2/2] kbuild: standalone: simplify clean-files   Masahiro Yamada
      • [U-Boot] [U-Boot,2/2] kbuild: standalone: simplify clean-files   Tom Rini
      • [U-Boot] [PATCH v2] buildman: fix typos of --dry-run help message   Masahiro Yamada
      • [U-Boot] [PATCH v2] buildman: fix typos of --dry-run help message   Simon Glass
• [U-Boot] Problem writing to Samsung E-Die NAND on OpenRD-like platform   Wolfgang Wegner
• [U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board   Otavio Salvador
  • [U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board   Li Ye-B37916
    • [U-Boot] [U-Boot, U-boot] ARM: keystone: clock: use correct BWADJ field mask for PASSPLLCTL0   Tom Rini
    • [U-Boot] omap3_beagle: Add boot script support to omap3 beagle board   Tom Rini
    • [U-Boot] ARM: DRA72: DDR3: Add emif settings for 666MHz clock   Tom Rini
    • [U-Boot] [U-Boot, U-boot] keystone2: use readl/writel functions instead of redefinition   Tom Rini
    • [U-Boot] arm: am335x: add Kconfig range attribute to prevent invalid CONS_INDEX   Tom Rini
    • [U-Boot] Please pull u-boot-ti/master   Tom Rini
      • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
      • [U-Boot] [PATCH v5 0/14] Introduce driver model serial uclass   Simon Glass
      • [U-Boot] [PATCH v5 01/14] serial: Set up the 'priv' pointer when creating a serial device   Simon Glass
      • [U-Boot] [PATCH v5 01/14] serial: Set up the 'priv' pointer when creating a serial device   Simon Glass
      • [U-Boot] [PATCH v5 02/14] dm: fdt: Add a function to look up a chosen node   Simon Glass
      • [U-Boot] [PATCH v5 02/14] dm: fdt: Add a function to look up a chosen node   Simon Glass
      • [U-Boot] [PATCH v5 03/14] dm: Adjust lists_bind_fdt() to return the bound device   Simon Glass
      • [U-Boot] [PATCH v5 03/14] dm: Adjust lists_bind_fdt() to return the bound device   Simon Glass
      • [U-Boot] [PATCH v5 04/14] dm: Add a uclass for serial devices   Simon Glass
      • [U-Boot] [PATCH v5 04/14] dm: Add a uclass for serial devices   Simon Glass
      • [U-Boot] [PATCH v5 05/14] sandbox: Convert serial driver to use driver model   Simon Glass
      • [U-Boot] [PATCH v5 05/14] sandbox: Convert serial driver to use driver model   Simon Glass
      • [U-Boot] [PATCH v5 06/14] sandbox: serial: Support a coloured console   Simon Glass
      • [U-Boot] [PATCH v5 06/14] sandbox: serial: Support a coloured console   Simon Glass
      • [U-Boot] [PATCH v5 07/14] sandbox: dts: Add a serial console node   Simon Glass
      • [U-Boot] [PATCH v5 07/14] sandbox: dts: Add a serial console node   Simon Glass
      • [U-Boot] [PATCH v5 08/14] dm: exynos: Mark exynos5 console as pre-reloc   Simon Glass
      • [U-Boot] [PATCH v5 09/14] dm: exynos: Move serial to driver model   Simon Glass
      • [U-Boot] [PATCH v5 10/14] dm: serial: Move baud rate calculation to ns16550.c   Simon Glass
      • [U-Boot] [PATCH v5 10/14] dm: serial: Move baud rate calculation to ns16550.c   Simon Glass
      • [U-Boot] [PATCH v5 11/14] dm: serial: Collect common baud rate code in ns16550   Simon Glass
      • [U-Boot] [PATCH v5 11/14] dm: serial: Collect common baud rate code in ns16550   Simon Glass
      • [U-Boot] [PATCH v5 12/14] dm: serial: Add driver model support for ns16550   Simon Glass
      • [U-Boot] [PATCH v5 12/14] dm: serial: Add driver model support for ns16550   Simon Glass
      • [U-Boot] [PATCH v5 13/14] tegra: dts: Add serial port details   Simon Glass
      • [U-Boot] [PATCH v5 13/14] tegra: dts: Add serial port details   Simon Glass
      • [U-Boot] [PATCH v5 14/14] dm: tegra: Enable driver model for serial   Simon Glass
      • [U-Boot] [PATCH v5 14/14] dm: tegra: Enable driver model for serial   Simon Glass
      • [U-Boot] [PATCH v5 14/14] dm: tegra: Enable driver model for serial   Tom Rini
      • [U-Boot] [PATCH v5 14/14] dm: tegra: Enable driver model for serial   Otavio Salvador
      • [U-Boot] [PATCH v5 14/14] dm: tegra: Enable driver model for serial   Simon Glass
      • [U-Boot] [PATCH v5 0/14] Introduce driver model serial uclass   Simon Glass
• [U-Boot] About verify uboot   Simon Glass
  • [U-Boot] Uboot - verified boot - CONFIG_OF_SEPARATE   Simon Glass
    • [U-Boot] [PATCH v3 0/3] spi, sf: add mtdparts feature to spi and sf commands   Heiko Schocher
    • [U-Boot] [PATCH v3 1/3] mtd, spi: add MTD layer driver   Heiko Schocher
    • [U-Boot] [PATCH v3 2/3] mtd, nand: move common functions from cmd_nand.c to common place   Heiko Schocher
    • [U-Boot] [PATCH v3 3/3] spi, sf: use offset and size in sf cmd from mtdpartition   Heiko Schocher
    • [U-Boot] [PATCH v6 0/17] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   Alison Wang
    • [U-Boot] [PATCH v6 06/17] esdhc: Add CONFIG_SYS_FSL_ESDHC_LE and CONFIG_SYS_FSL_ESDHC_BE macros   Alison Wang
    • [U-Boot] [PATCH v6 07/17] ls102xa: esdhc: Add esdhc support for LS102xA   Alison Wang
    • [U-Boot] [PATCH v6 11/17] arm: ls102xa: Add basic support for LS1021AQDS board   Alison Wang
    • [U-Boot] [PATCH v6 12/17] arm: ls102xa: Add basic support for LS1021ATWR board   Alison Wang
    • [U-Boot] [PATCH v6 13/17] net: tsec: Remove tx snooping support from LS1   Alison Wang
    • [U-Boot] [PATCH v6 01/17] arm: ls102xa: Add Freescale LS102xA SoC support   Alison Wang
    • [U-Boot] [PATCH v6 01/17] arm: ls102xa: Add Freescale LS102xA SoC support   Wolfgang Denk
    • [U-Boot] [PATCH v6 01/17] arm: ls102xa: Add Freescale LS102xA SoC support   York Sun
    • [U-Boot] [PATCH v6 02/17] ls102xa: i2c: Add i2c support for LS102xA   Alison Wang
    • [U-Boot] [PATCH v6 03/17] net: Merge asm/fsl_enet.h into fsl_mdio.h   Alison Wang
    • [U-Boot] [PATCH v6 04/17] net: mdio: Use mb() to be compatible for both ARM and PowerPC   Alison Wang
    • [U-Boot] [PATCH v6 05/17] ls102xa: etsec: Add etsec support for LS102xA   Alison Wang
    • [U-Boot] [PATCH v6 08/17] driver/ddr/freescale: Add support of accumulate ECC   Alison Wang
    • [U-Boot] [PATCH v6 09/17] driver/ddr/freescale: Fix DDR3 driver for ARM   Alison Wang
    • [U-Boot] [PATCH v6 10/17] driver/ddr/fsl: Add support of overriding chip select write leveling   Alison Wang
    • [U-Boot] [PATCH v6 14/17] serial: lpuart: add 32-bit registers lpuart support   Alison Wang
    • [U-Boot] [PATCH v6 15/17] video: dcu: Add DCU driver support   Alison Wang
    • [U-Boot] [PATCH v6 16/17] video: dcu: Add Sii9022A HDMI Transmitter support   Alison Wang
    • [U-Boot] [PATCH v6 17/17] ls102xa: dcu: Add platform support for DCU on LS1021ATWR board   Alison Wang
    • [U-Boot] [PATCH v4 0/6] Add support for Panasonic UniPhier SoCs/boards   Masahiro Yamada
    • [U-Boot] [PATCH v4 3/6] arm: uniphier: add UniPhier SoC support code   Masahiro Yamada
    • [U-Boot] [PATCH v4 3/6] arm: uniphier: add UniPhier SoC support code   Simon Glass
    • [U-Boot] [PATCH v4 3/6] arm: uniphier: add UniPhier SoC support code   Masahiro YAMADA
    • [U-Boot] [PATCH v4 3/6] arm: uniphier: add UniPhier SoC support code   Simon Glass
    • [U-Boot] [PATCH v4 1/6] nand: denali: add Denali NAND driver for SPL   Masahiro Yamada
    • [U-Boot] [PATCH v4 1/6] nand: denali: add Denali NAND driver for SPL   Chin Liang See
    • [U-Boot] [PATCH v4 1/6] nand: denali: add Denali NAND driver for SPL   Masahiro Yamada
    • [U-Boot] [PATCH v4 1/6] nand: denali: add Denali NAND driver for SPL   Chin Liang See
    • [U-Boot] [PATCH v4 1/6] nand: denali: add Denali NAND driver for SPL   Masahiro Yamada
    • [U-Boot] [PATCH v4 1/6] nand: denali: add Denali NAND driver for SPL   Chin Liang See
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Masahiro Yamada
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Marek Vasut
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Masahiro Yamada
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Marek Vasut
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Simon Glass
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Masahiro YAMADA
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Masahiro Yamada
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Simon Glass
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Masahiro YAMADA
    • [U-Boot] [PATCH v4 2/6] serial: add UniPhier serial driver   Simon Glass
    • [U-Boot] [PATCH v4 4/6] arm: uniphier: add Kconfig and defconfig   Masahiro Yamada
    • [U-Boot] [PATCH v4 5/6] MAINTAINERS: add me as a maintainer of UniPhier platform   Masahiro Yamada
    • [U-Boot] [PATCH v4 5/6] MAINTAINERS: add me as a maintainer of UniPhier platform   Albert ARIBAUD
    • [U-Boot] [PATCH v4 5/6] MAINTAINERS: add me as a maintainer of UniPhier platform   Michal Simek
    • [U-Boot] [PATCH v4 6/6] git-mailrc: add me as a maintainer of UniPhier platform   Masahiro Yamada
    • [U-Boot] [PATCH v6 0/17] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support   Alison Wang
    • [U-Boot] [PATCH v6 01/17] arm: ls102xa: Add Freescale LS102xA SoC support   Alison Wang
    • [U-Boot] [PATCH v6 02/17] ls102xa: i2c: Add i2c support for LS102xA   Alison Wang
    • [U-Boot] [PATCH v6 03/17] net: Merge asm/fsl_enet.h into fsl_mdio.h   Alison Wang
    • [U-Boot] [PATCH v6 04/17] net: mdio: Use mb() to be compatible for both ARM and PowerPC   Alison Wang
    • [U-Boot] [PATCH v6 05/17] ls102xa: etsec: Add etsec support for LS102xA   Alison Wang
    • [U-Boot] [PATCH v6 06/17] esdhc: Add CONFIG_SYS_FSL_ESDHC_LE and CONFIG_SYS_FSL_ESDHC_BE macros   Alison Wang
    • [U-Boot] [PATCH v6 07/17] ls102xa: esdhc: Add esdhc support for LS102xA   Alison Wang
    • [U-Boot] [PATCH v6 08/17] driver/ddr/freescale: Add support of accumulate ECC   Alison Wang
    • [U-Boot] [PATCH v6 09/17] driver/ddr/freescale: Fix DDR3 driver for ARM   Alison Wang
    • [U-Boot] [PATCH v6 10/17] driver/ddr/fsl: Add support of overriding chip select write leveling   Alison Wang
    • [U-Boot] [PATCH v6 11/17] arm: ls102xa: Add basic support for LS1021AQDS board   Alison Wang
    • [U-Boot] [PATCH v6 12/17] arm: ls102xa: Add basic support for LS1021ATWR board   Alison Wang
    • [U-Boot] [PATCH v6 13/17] net: tsec: Remove tx snooping support from LS1   Alison Wang
    • [U-Boot] [PATCH v6 14/17] serial: lpuart: add 32-bit registers lpuart support   Alison Wang
    • [U-Boot] [PATCH v6 15/17] video: dcu: Add DCU driver support   Alison Wang
    • [U-Boot] [PATCH v6 16/17] video: dcu: Add Sii9022A HDMI Transmitter support   Alison Wang
    • [U-Boot] [PATCH v6 17/17] ls102xa: dcu: Add platform support for DCU on LS1021ATWR board   Alison Wang
    • [U-Boot] [UBOOT PATCH] ci_udc: Update the ci_udc driver to support bulk transfers   Siva Durga Prasad Paladugu
    • [U-Boot] [UBOOT PATCH] ci_udc: Update the ci_udc driver to support bulk transfers   Michal Simek
• [U-Boot] [PATCH] odroid: set MPLL clock to 880MHz   Minkyu Kang
  • [U-Boot] [PATCH] odroid: set MPLL clock to 880MHz   Przemyslaw Marczak
    • [U-Boot] [PATCH] odroid: set MPLL clock to 880MHz   Minkyu Kang
      • [U-Boot] [PATCH] odroid: set MPLL clock to 880MHz   Jaehoon Chung
      • [U-Boot] [PATCH] odroid: set MPLL clock to 880MHz   Lukasz Majewski
      • [U-Boot] [UBOOT PATCH] f_thor: Dont perform reset at the end of thor   Siva Durga Prasad Paladugu
      • [U-Boot] [UBOOT PATCH] f_thor: Dont perform reset at the end of thor   Michal Simek
      • [U-Boot] [PATCH] mtd: nand: Fix length bug in ioread16_rep() and iowrite16_rep()   Stefan Roese
      • [U-Boot] [PATCH] mtd: nand: Fix length bug in ioread16_rep() and iowrite16_rep()   Heiko Schocher
      • [U-Boot] [PATCH] mtd: nand: Fix length bug in ioread16_rep() and iowrite16_rep()   Stefan Roese
• [U-Boot] [PATCH v5] arm: tegra: initial support for apalis t30   Marcel Ziswiler
  • [U-Boot] [PATCH] powerpc/t104xrdb: Set DDR ODT to 75ohm   Priyanka Jain
  • [U-Boot] [PATCH] powerpc/t104xrdb: Set DDR ODT to 75ohm   York Sun
• [U-Boot] [PATCH V4 0/9] peach_pit: Add support for FIMD, DP and parade chip   Minkyu Kang
  • [U-Boot] [PATCH V4 0/9] peach_pit: Add support for FIMD, DP and parade chip   Ajay kumar
    • [U-Boot] [UBOOT PATCH] usb: gadget: f_thor: Allocate request up to THOR_PACKET_SIZE   Siva Durga Prasad Paladugu
    • [U-Boot] [UBOOT PATCH] usb: gadget: f_thor: Allocate request up to THOR_PACKET_SIZE   Michal Simek
• [U-Boot] [PATCH] dw_mmc: cleanups   Pavel Machek
  • [U-Boot] [PATCH] dw_mmc: cleanups   Marek Vasut
    • [U-Boot] [PATCH] dw_mmc: cleanups   Pavel Machek
      • [U-Boot] [PATCH] dw_mmc: cleanups   Marek Vasut
      • [U-Boot] [PATCH] dw_mmc: cleanups   Pavel Machek
  • [U-Boot] [PATCH] dw_mmc: cleanups   Jaehoon Chung
    • [U-Boot] [PATCH] dw_mmc: cleanups   Chin Liang See
      • [U-Boot] [PATCH v1 1/1] net: dns: fix for DNS queries sent to the wrong MAC address   Gerhard Sittig
      • [U-Boot] [PATCH V5 0/9] peach_pit: Add support for FIMD, DP and parade chip   Ajay Kumar
      • [U-Boot] [PATCH V5 1/9] exynos_fb: Remove usage of static defines   Ajay Kumar
      • [U-Boot] [PATCH V5 2/9] arm: exynos: Add RPLL for Exynos5420   Ajay Kumar
      • [U-Boot] [PATCH V5 3/9] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Ajay Kumar
      • [U-Boot] [PATCH V5 4/9] video: exynos_fimd: Add framework to disable FIMD sysmmu   Ajay Kumar
      • [U-Boot] [PATCH V5 5/9] video: Add driver for Parade PS8625 dP to LVDS bridge   Ajay Kumar
      • [U-Boot] [PATCH V5 6/9] ARM: exynos: Add missing declaration for gpio_direction_input   Ajay Kumar
      • [U-Boot] [PATCH V5 7/9] exynos5420: add callbacks needed for exynos_fb driver   Ajay Kumar
      • [U-Boot] [PATCH V5 8/9] ARM: exynos: peach_pit: Add DT nodes for fimd and parade bridge chip   Ajay Kumar
      • [U-Boot] [PATCH V5 9/9] CONFIGS: peach-pit: Enable display for peach_pit board   Ajay Kumar
      • [U-Boot] [PATCH V5 0/9] peach_pit: Add support for FIMD, DP and parade chip   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
  • [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-sunxi.git/master   Ian Campbell
  • [U-Boot] Please pull u-boot-sunxi.git/master   Albert ARIBAUD
    • [U-Boot] Please pull u-boot-sunxi.git/master   Ian Campbell
      • [U-Boot] [PATCH] OMAP4: Use generic 'load' command instead of 'fatload' for 'loadbootscript' and 'loadbootenv' as already done for 'loadimage' and 'loaduimage'.   Guillaume GARDET
      • [U-Boot] [PATCH] OMAP4: Use generic 'load' command instead of 'fatload' for 'loadbootscript' and 'loadbootenv' as already done for 'loadimage' and 'loaduimage'.   Guillaume Gardet
      • [U-Boot] [PATCH] OMAP4: Use generic 'load' command instead of 'fatload' for 'loadbootscript' and 'loadbootenv' as already done for 'loadimage' and 'loaduimage'.   Tom Rini
      • [U-Boot] OMAP4: Use generic 'load' command instead of 'fatload' for 'loadbootscript' and 'loadbootenv' as already done for 'loadimage' and 'loaduimage'.   Tom Rini
      • [U-Boot] [U-boot] [Patch v2 0/4] keystone2: generalize navigator driver usage   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 1/4] keystone2: keystone_nav: don't use hard addresses in qm_config   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 2/4] keystone2: keystone_nav: don't use hard addresses in netcp_pktdma   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 3/4] dma: keystone_nav: move keystone_nav driver to driver/dma/   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 4/4] dma: keystone_nav: generalize driver usage   Ivan Khoronzhuk
      • [U-Boot] [PATCH] mx6qsabreauto: Remove imx6q-sabreauto.dts   Fabio Estevam
      • [U-Boot] [PATCH] mx6qsabreauto: Remove imx6q-sabreauto.dts   Otavio Salvador
      • [U-Boot] [PATCH] mx6qsabreauto: Remove imx6q-sabreauto.dts   Masahiro Yamada
      • [U-Boot] [PATCH] mx6qsabreauto: Remove imx6q-sabreauto.dts   Stefano Babic
      • [U-Boot] [U-boot] [Patch v2] keystone: usb: add support of usb xhci   Ivan Khoronzhuk
  • [U-Boot] [PATCH v10 01/14] patman: Support the 'reverse' option for 'git log'   Simon Glass
    • [U-Boot] [PATCH v10 01/14] patman: Support the 'reverse' option for 'git log'   Masahiro YAMADA
    • [U-Boot] [PATCH v10 01/14] patman: Support the 'reverse' option for 'git log'   Masahiro YAMADA
      • [U-Boot] [PATCH v10 01/14] patman: Support the 'reverse' option for 'git log'   Simon Glass
  • [U-Boot] Please pull u-boot-x86.git branch 'patman'   Simon Glass
    • [U-Boot] Please pull u-boot-x86.git branch 'patman'   Tom Rini
      • [U-Boot] [U-boot] [Patch v2 0/6] keystone2: add k2l SoC and k2l_evm board support   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 1/6] ARM: keystone2: add K2L device hardware definitions   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 2/6] keystone2: clock: add K2L clock definitions and commands   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 3/6] keystone2: msmc: add MSMC cache coherency support for K2L SOC   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 4/6] ARM: keystone2: spl: add K2L SoC support   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 5/6] keystone2: enable OSR clock domain for K2L SoC   Ivan Khoronzhuk
      • [U-Boot] [U-boot] [Patch v2 6/6] keystone2: k2l-evm: add board support   Ivan Khoronzhuk
    • [U-Boot] Verified boot and Legacy Kernel Images   Simon Glass
      • [U-Boot] Verified boot and Legacy Kernel Images   mike
      • [U-Boot] [PATCH v3 0/18] buildman: Expand test coverage   Simon Glass
      • [U-Boot] [PATCH v3 01/18] patman: Add a way of recording terminal output for testing   Simon Glass
      • [U-Boot] [PATCH v3 01/18] patman: Add a way of recording terminal output for testing   Simon Glass
      • [U-Boot] [PATCH v3 02/18] buildman: Send builder output through a function for testing   Simon Glass
      • [U-Boot] [PATCH v3 02/18] buildman: Send builder output through a function for testing   Simon Glass
      • [U-Boot] [PATCH v3 03/18] buildman: Enhance basic test to check summary output   Simon Glass
      • [U-Boot] [PATCH v3 03/18] buildman: Enhance basic test to check summary output   Simon Glass
      • [U-Boot] [PATCH v3 04/18] patman: RunPipe() should not pipe stdout/stderr unless asked   Simon Glass
      • [U-Boot] [PATCH v3 04/18] patman: RunPipe() should not pipe stdout/stderr unless asked   Simon Glass
      • [U-Boot] [PATCH v3 05/18] buildman: Move the command line code into its own file   Simon Glass
      • [U-Boot] [PATCH v3 05/18] buildman: Move the command line code into its own file   Simon Glass
      • [U-Boot] [PATCH v3 06/18] buildman: Move full help code into the control module   Simon Glass
      • [U-Boot] [PATCH v3 06/18] buildman: Move full help code into the control module   Simon Glass
      • [U-Boot] [PATCH v3 07/18] patman: Provide a way to intercept commands for testing   Simon Glass
      • [U-Boot] [PATCH v3 07/18] patman: Provide a way to intercept commands for testing   Simon Glass
      • [U-Boot] [PATCH v3 08/18] buildman: Add a functional test   Simon Glass
      • [U-Boot] [PATCH v3 08/18] buildman: Add a functional test   Simon Glass
      • [U-Boot] [PATCH v3 09/18] buildman: Set up bsettings outside the control module   Simon Glass
      • [U-Boot] [PATCH v3 09/18] buildman: Set up bsettings outside the control module   Simon Glass
      • [U-Boot] [PATCH v3 10/18] buildman: Avoid looking at config file or toolchains in tests   Simon Glass
      • [U-Boot] [PATCH v3 10/18] buildman: Avoid looking at config file or toolchains in tests   Simon Glass
      • [U-Boot] [PATCH v3 11/18] buildman: Allow tests to have their own boards   Simon Glass
      • [U-Boot] [PATCH v3 11/18] buildman: Allow tests to have their own boards   Simon Glass
      • [U-Boot] [PATCH v3 12/18] buildman: Correct counting of build failures on retry   Simon Glass
      • [U-Boot] [PATCH v3 12/18] buildman: Correct counting of build failures on retry   Simon Glass
      • [U-Boot] [PATCH v3 13/18] buildman: Provide an internal option to clean the outpur dir   Simon Glass
      • [U-Boot] [PATCH v3 13/18] buildman: Provide an internal option to clean the outpur dir   Simon Glass
      • [U-Boot] [PATCH v3 14/18] patman: Start with a clean series when needed   Simon Glass
      • [U-Boot] [PATCH v3 14/18] patman: Start with a clean series when needed   Simon Glass
      • [U-Boot] [PATCH v3 15/18] buildman: Add additional functional tests   Simon Glass
      • [U-Boot] [PATCH v3 15/18] buildman: Add additional functional tests   Simon Glass
      • [U-Boot] [PATCH v3 16/18] buildman: Expand output test to cover directory prefixes   Simon Glass
      • [U-Boot] [PATCH v3 16/18] buildman: Expand output test to cover directory prefixes   Simon Glass
      • [U-Boot] [PATCH v3 17/18] buildman: Permit branch names with an embedded '/'   Simon Glass
      • [U-Boot] [PATCH v3 17/18] buildman: Permit branch names with an embedded '/'   Simon Glass
      • [U-Boot] [PATCH v3 18/18] buildman: Ignore conflicting tags   Simon Glass
      • [U-Boot] [PATCH v3 18/18] buildman: Ignore conflicting tags   Simon Glass
• [U-Boot] [PATCH 1/1] ARM: sheevaplug: fix uboot corruption   drEagle
  • [U-Boot] [PATCH V4 00/19] Introduce cm-fx6 board   Tom Rini
    • [U-Boot] [PATCH] generic_board: do not set gd->fdt_blob unless CONFIG_OF_CONTROL=y   Masahiro Yamada
    • [U-Boot] [PATCH] generic_board: do not set gd->fdt_blob unless CONFIG_OF_CONTROL=y   Simon Glass
    • [U-Boot] [PATCH] generic_board: do not set gd->fdt_blob unless CONFIG_OF_CONTROL=y   Masahiro YAMADA
    • [U-Boot] [PATCH] generic_board: do not set gd->fdt_blob unless CONFIG_OF_CONTROL=y   Simon Glass
    • [U-Boot] generic_board: do not set gd->fdt_blob unless CONFIG_OF_CONTROL=y   Tom Rini
• [U-Boot] [PATCH v10 02/14] patman: Fix indentation in terminal.py   Simon Glass
• [U-Boot] [PATCH v10 03/14] patman: Correct unit tests to run correctly   Simon Glass
• [U-Boot] [PATCH v10 04/14] patman: Remove the -a option   Simon Glass
  • [U-Boot] [PATCH v10 05/14] patman: Use --no-pager' to stop git from forking a pager   Simon Glass
• [U-Boot] [PATCH v10 06/14] patman: Avoid changing the order of tags   Simon Glass
• [U-Boot] [PATCH v10 07/14] buildman: Set the return code to indicate build result   Simon Glass
• [U-Boot] [PATCH v10 08/14] buildman: Allow make-flags variables to include '-' and '_'   Simon Glass
• [U-Boot] [PATCH v10 09/14] buildman: Implement an option to exclude boards from the build   Simon Glass
  • [U-Boot] [PATCH v10 10/14] buildman: Remove the directory prefix from each error line   Simon Glass
• [U-Boot] [PATCH v10 12/14] buildman: Separate out display of warnings and errors   Simon Glass
• [U-Boot] [PATCH v10 13/14] patman: Fix detection of git version   Simon Glass
• [U-Boot] [PATCH v3 3/4] mtd: nand: add Freescale vf610_nfc driver   Stefan Agner
  • [U-Boot] [PATCH v2] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
  • [U-Boot] [PATCH v2] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
  • [U-Boot] [PATCH RESEND] vf610twr: Tune DDR initialization settings   Stefan Agner
  • [U-Boot] [PATCH RESEND] vf610twr: Tune DDR initialization settings   Albert ARIBAUD
  • [U-Boot] [PATCH RESEND] vf610twr: Tune DDR initialization settings   Stefan Agner
  • [U-Boot] [PATCH RESEND] vf610twr: Tune DDR initialization settings   Stefano Babic
  • [U-Boot] [U-boot] [Patch] mtd: nand: davinci_nand: update write_page function for keystone RBL   Ivan Khoronzhuk
  • [U-Boot] [U-Boot, U-boot] mtd: nand: davinci_nand: update write_page function for keystone RBL   Tom Rini
• [U-Boot] passing board description structure when loading OS image   Ivan Krivonos
  • [U-Boot] passing board description structure when loading OS image   Wolfgang Denk
    • [U-Boot] [PATCH 0/10] Move some CONFIGs to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Stephen Warren
    • [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Masahiro YAMADA
    • [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Stephen Warren
    • [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Masahiro YAMADA
    • [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Masahiro YAMADA
    • [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Michal Simek
    • [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Daniel Schwierzeck
    • [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 10/10] kconfig: CONFIG_DEFAULT_DEVICE_TREE to kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 10/10] kconfig: CONFIG_DEFAULT_DEVICE_TREE to kconfig   Stephen Warren
    • [U-Boot] [PATCH 10/10] kconfig: CONFIG_DEFAULT_DEVICE_TREE to kconfig   Masahiro YAMADA
    • [U-Boot] [PATCH 10/10] kconfig: CONFIG_DEFAULT_DEVICE_TREE to kconfig   Fabio Estevam
    • [U-Boot] [PATCH 10/10] kconfig: CONFIG_DEFAULT_DEVICE_TREE to kconfig   Masahiro YAMADA
    • [U-Boot] [PATCH 01/10] kconfig: add blank Kconfig files   Masahiro Yamada
    • [U-Boot] [PATCH 01/10] kconfig: add blank Kconfig files   Simon Glass
    • [U-Boot] [PATCH 02/10] kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 02/10] kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig   Simon Glass
    • [U-Boot] [PATCH 03/10] kconfig: move CONFIG_CMD_BOOTM to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 03/10] kconfig: move CONFIG_CMD_BOOTM to Kconfig   Simon Glass
    • [U-Boot] [PATCH 04/10] kconfig: move CONFIG_CMD_CRC32 to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 04/10] kconfig: move CONFIG_CMD_CRC32 to Kconfig   Simon Glass
    • [U-Boot] [PATCH 05/10] kconfig: move CONFIG_CMD_EXPORTENV to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 05/10] kconfig: move CONFIG_CMD_EXPORTENV to Kconfig   Simon Glass
    • [U-Boot] [PATCH 06/10] kconfig: move CONFIG_CMD_GO to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 06/10] kconfig: move CONFIG_CMD_GO to Kconfig   Simon Glass
    • [U-Boot] [PATCH 07/10] kconfig: move CONFIG_CMD_IMPORTENV to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 07/10] kconfig: move CONFIG_CMD_IMPORTENV to Kconfig   Simon Glass
    • [U-Boot] [PATCH 08/10] kconfig: remove config_cmd_defaults.h   Masahiro Yamada
    • [U-Boot] [PATCH 08/10] kconfig: remove config_cmd_defaults.h   Simon Glass
    • [U-Boot] [PATCH 0/2] Refactoring the type defs in Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 1/2] kconfig: add CONFIG_SYS_{ARCH, CPU, ...} type def to arch/Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH 2/2] kconfig: remove redundant "string" type in arch and board Kconfigs   Masahiro Yamada
    • [U-Boot] [PATCH V5 08/19] arm: mx6: ddr: cleanup   Nikita Kiryanov
    • [U-Boot] [PATCH V5 13/19] arm: mx6: add support for Compulab cm-fx6 CoM   Nikita Kiryanov
    • [U-Boot] [PATCH V5 13/19] arm: mx6: add support for Compulab cm-fx6 CoM   Marek Vasut
    • [U-Boot] [PATCH 0/5] ARM: sheevaplug: refresh for 201410   Gerald Kerma
    • [U-Boot] [PATCH 1/5] ARM: sheevaplug: change env location   Gerald Kerma
    • [U-Boot] [PATCH 2/5] ARM: sheevaplug: add MVSATA driver   Gerald Kerma
    • [U-Boot] [PATCH 3/5] ARM: sheevaplug: add MTD defaults   Gerald Kerma
    • [U-Boot] [PATCH 4/5] ARM: sheevaplug: redefine MTDPARTS   Gerald Kerma
    • [U-Boot] [PATCH 5/5] ARM: sheevaplug: add HUSH parser   Gerald Kerma
    • [U-Boot] [PATCH 0/5] ARM: sheevaplug: refresh for 201410   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 0/5] ARM: sheevaplug: refresh for 201410   Prafulla Wadaskar
    • [U-Boot] [PATCH 0/5] ARM: sheevaplug: refresh for 201410   drEagle
    • [U-Boot] [PATCH 0/5] ARM: sheevaplug: refresh for 201410   drEagle
    • [U-Boot] [PATCH 0/5] ARM: sheevaplug: refresh for 201410   drEagle
• [U-Boot] [PATCH] e1000: fix no nvm build   Marcel Ziswiler
  • [U-Boot] [PATCH] e1000: fix no nvm build   Marek Vasut
  • [U-Boot] e1000: fix no nvm build   Tom Rini
• [U-Boot] [PATCH] e1000: add i211 and unprogrammed i210/i211 support   Marcel Ziswiler
  • [U-Boot] [PATCH] e1000: add i211 and unprogrammed i210/i211 support   Marek Vasut
    • [U-Boot] [PATCH] e1000: add i211 and unprogrammed i210/i211 support   Marcel Ziswiler
      • [U-Boot] [PATCH] e1000: add i211 and unprogrammed i210/i211 support   Marek Vasut
  • [U-Boot] relocation problem on powerpc   Chris Packham
    • [U-Boot] relocation problem on powerpc   Chris Packham
    • [U-Boot] relocation problem on powerpc   Chris Packham
      • [U-Boot] relocation problem on powerpc   Joakim Tjernlund
      • [U-Boot] relocation problem on powerpc   Joakim Tjernlund
      • [U-Boot] relocation problem on powerpc   Chris Packham
      • [U-Boot] relocation problem on powerpc   Joakim Tjernlund
      • [U-Boot] relocation problem on powerpc   Chris Packham
      • [U-Boot] [RFC PATCH v1] powerpc: Fix off-by-one error in relocation   Chris Packham
      • [U-Boot] [RFC PATCH v1] powerpc: Fix off-by-one error in relocation   Chris Packham
      • [U-Boot] relocation problem on powerpc   Wolfgang Denk
      • [U-Boot] relocation problem on powerpc   Chris Packham
      • [U-Boot] relocation problem on powerpc   Wolfgang Denk
      • [U-Boot] [PATCH] board/t1040qds: Add sgmii ports support in 0xA7 protocol   Priyanka Jain
      • [U-Boot] [PATCH] board/t1040qds: Add sgmii ports support in 0xA7 protocol   York Sun
      • [U-Boot] [PATCH] microblaze: remove #ident directive to fix build error   Masahiro Yamada
• [U-Boot] Recommended MIPS toolchain   Masahiro Yamada
  • [U-Boot] Recommended MIPS toolchain   Vasili Galka
  • [U-Boot] Recommended MIPS toolchain   Daniel Schwierzeck
    • [U-Boot] [PATCH 0/7] ARM: sunxi: Add basic support for Allwinner A31 (sun6i)   Chen-Yu Tsai
    • [U-Boot] [PATCH 1/7] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined   Chen-Yu Tsai
    • [U-Boot] [PATCH 1/7] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined   Chen-Yu Tsai
    • [U-Boot] [PATCH 1/7] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined   Ian Campbell
    • [U-Boot] [PATCH 2/7] ARM: sun6i: Add base address for the new controllers in A31   Chen-Yu Tsai
    • [U-Boot] [PATCH 2/7] ARM: sun6i: Add base address for the new controllers in A31   Ian Campbell
    • [U-Boot] [PATCH 3/7] ARM: sun6i: Add support for the new power control module found on the A31   Chen-Yu Tsai
    • [U-Boot] [PATCH 3/7] ARM: sun6i: Add support for the new power control module found on the A31   Ian Campbell
    • [U-Boot] [PATCH 3/7] ARM: sun6i: Add support for the new power control module found on the A31   Chen-Yu Tsai
    • [U-Boot] [PATCH 3/7] ARM: sun6i: Add support for the new power control module found on the A31   Hans de Goede
    • [U-Boot] [PATCH 4/7] ARM: sun6i: Add clock support   Chen-Yu Tsai
    • [U-Boot] [PATCH 4/7] ARM: sun6i: Add clock support   Ian Campbell
    • [U-Boot] [PATCH 4/7] ARM: sun6i: Add clock support   Chen-Yu Tsai
    • [U-Boot] [PATCH 4/7] ARM: sun6i: Add clock support   Ian Campbell
    • [U-Boot] [PATCH 4/7] ARM: sun6i: Add clock support   Chen-Yu Tsai
    • [U-Boot] [PATCH 4/7] ARM: sun6i: Add clock support   Hans de Goede
    • [U-Boot] [PATCH 4/7] ARM: sun6i: Add clock support   Ian Campbell
    • [U-Boot] [PATCH 4/7] ARM: sun6i: Add clock support   Hans de Goede
    • [U-Boot] [PATCH 4/7] ARM: sun6i: Add clock support   Olliver Schinagl
    • [U-Boot] [PATCH 5/7] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Chen-Yu Tsai
    • [U-Boot] [PATCH 5/7] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Ian Campbell
    • [U-Boot] [PATCH 5/7] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Chen-Yu Tsai
    • [U-Boot] [PATCH 5/7] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Chen-Yu Tsai
    • [U-Boot] [PATCH 5/7] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Ian Campbell
    • [U-Boot] [PATCH 5/7] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Chen-Yu Tsai
    • [U-Boot] [PATCH 5/7] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Ian Campbell
    • [U-Boot] [PATCH 6/7] ARM: sun6i: Setup the A31 UART0 muxing   Chen-Yu Tsai
    • [U-Boot] [PATCH 6/7] ARM: sun6i: Setup the A31 UART0 muxing   Ian Campbell
    • [U-Boot] [PATCH 6/7] ARM: sun6i: Setup the A31 UART0 muxing   Michael Trimarchi
    • [U-Boot] [PATCH 6/7] ARM: sun6i: Setup the A31 UART0 muxing   Chen-Yu Tsai
    • [U-Boot] [PATCH 7/7] ARM: sunxi: Add basic A31 support   Chen-Yu Tsai
    • [U-Boot] [PATCH 7/7] ARM: sunxi: Add basic A31 support   Ian Campbell
    • [U-Boot] [PATCH 7/7] ARM: sunxi: Add basic A31 support   Maxime Ripard
    • [U-Boot] [PATCH 7/7] ARM: sunxi: Add basic A31 support   Chen-Yu Tsai
    • [U-Boot] [PATCH 0/7] ARM: sunxi: Add basic support for Allwinner A31 (sun6i)   Hans de Goede
    • [U-Boot] [linux-sunxi] Re: [PATCH 0/7] ARM: sunxi: Add basic support for Allwinner A31 (sun6i)   Siarhei Siamashka
    • [U-Boot] [linux-sunxi] Re: [PATCH 0/7] ARM: sunxi: Add basic support for Allwinner A31 (sun6i)   Hans de Goede
    • [U-Boot] [linux-sunxi] Re: [PATCH 0/7] ARM: sunxi: Add basic support for Allwinner A31 (sun6i)   Chen-Yu Tsai
    • [U-Boot] [linux-sunxi] Re: [PATCH 0/7] ARM: sunxi: Add basic support for Allwinner A31 (sun6i)   Hans de Goede
  • [U-Boot] [PATCH v2 02/40] fdt: Add a function to count strings   Simon Glass
    • [U-Boot] [PATCH v2 03/40] fdt: Add a function to get the index of a string   Simon Glass
  • [U-Boot] [PATCH v2 04/40] fdt: Add functions to retrieve strings   Simon Glass
• [U-Boot] [PATCH v2 05/40] fdt: Add resource parsing functions   Simon Glass
• [U-Boot] [PATCH v2 06/40] fdt: Add a function to return PCI BDF triplet   Simon Glass
  • [U-Boot] [PATCH v2 07/40] fdt: Add a subnodes iterator macro   Simon Glass
    • [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD   Maxin B. John
    • [U-Boot] [PATCH] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD   Maxin B. John
    • [U-Boot] mtdcore: Fix a build error with CONFIG_CMD_MTDPARTS_SPREAD   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq   York Sun
  • [U-Boot] Please pull u-boot-fsl-qoriq   Tom Rini
    • [U-Boot] [Patch v3 1/5] fdt_support: Move of_read_number to fdt_support.h   York Sun
    • [U-Boot] [Patch v3 2/5] fdt_support: Make of_bus_default_count_cells non static   York Sun
    • [U-Boot] [Patch v3 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page   York Sun
    • [U-Boot] [Patch v3 4/5] ARMv8/ls2085a: Enable secondary cores   York Sun
    • [U-Boot] [Patch v3 5/5] ARMv8/ls2085a: Move u-boot location to make room for RCW   York Sun
    • [U-Boot] [u-boot-release] [Patch v3 1/5] fdt_support: Move of_read_number to fdt_support.h   York Sun
• [U-Boot] how to pass ubott version to kernel   tony moseby
  • [U-Boot] how to pass ubott version to kernel   Wolfgang Denk
    • [U-Boot] [PATCH] net: usb: Add SMSC copyright to smsc95xx driver   Simon Glass
    • [U-Boot] net: usb: Add SMSC copyright to smsc95xx driver   Tom Rini
• [U-Boot] [PATCH v7 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
  • [U-Boot] [PATCH v7 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Stefano Babic
    • [U-Boot] [PATCH v7 1/2] net: fec_mxc: Adjust RX DMA alignment for mx6solox   Fabio Estevam
      • [U-Boot] [PATCH v3 1/5] imx: mx6qarm2: Add the kernel FDT Loading support   Ye.Li
      • [U-Boot] [PATCH v3 2/5] imx: mx6qarm2: Change the mmcroot and mmcpart env value   Ye.Li
      • [U-Boot] [PATCH v3 2/5] imx: mx6qarm2: Change the mmcroot and mmcpart env value   Stefano Babic
      • [U-Boot] [PATCH v3 4/5] imx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD reset   Ye.Li
      • [U-Boot] [PATCH v3 4/5] imx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD reset   Stefano Babic
      • [U-Boot] [PATCH v3 1/5] imx: mx6qarm2: Add the kernel FDT Loading support   Stefano Babic
      • [U-Boot] [PATCH v3 3/5] imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board   Ye.Li
      • [U-Boot] [PATCH v3 3/5] imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board   Stefano Babic
      • [U-Boot] [PATCH v3 3/5] imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board   Stefano Babic
      • [U-Boot] [PATCH v3 5/5] imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards   Ye.Li
      • [U-Boot] [PATCH v3 5/5] imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards   Stefano Babic
• [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)   Simon Glass
  • [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)   Przemyslaw Marczak
    • [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)   Przemyslaw Marczak
      • [U-Boot] [PATCH 0/8] samsung: Use common config files with Samsung boards (help wanted)   Simon Glass
      • [U-Boot] [PATCH] mpc8xx: move common linker scripts into the CPU directory   Masahiro Yamada
      • [U-Boot] [PATCH] mpc8xx: move common linker scripts into the CPU directory   Stefan Roese
      • [U-Boot] mpc8xx: move common linker scripts into the CPU directory   Tom Rini
      • [U-Boot] [PATCH 1/2] fsl_sec : Move SEC CCSR definition to common include   Ruchika Gupta
      • [U-Boot] [PATCH 2/2] fsl_sec : Change accessor function to take care of endianness   Ruchika Gupta
      • [U-Boot] [PATCH v2 1/4] imx: mx6sabresd/sabreauto: Move MX6Q/DL DDR and FDT configs to defconfig   Ye.Li
      • [U-Boot] [PATCH v2 2/4] imx: mx6qsabreauto: Rename the imximage.cfg to mx6q.cfg   Ye.Li
      • [U-Boot] [PATCH v2 3/4] imx: mx6solosabresd: Add the i.MX6Solo SABRESD board support   Ye.Li
      • [U-Boot] [PATCH v2 4/4] imx: mx6solosabreauto: Add the i.MX6Solo SABREAUTO board support   Ye.Li
      • [U-Boot] [PATCH v2 1/2] imx: mx6q/dlarm2: Change to use generic board   Ye.Li
      • [U-Boot] [PATCH v2 1/2] imx: mx6q/dlarm2: Change to use generic board   Stefano Babic
      • [U-Boot] [PATCH v2 2/2] imx: mx6slevk: Change to use generic board   Ye.Li
      • [U-Boot] [PATCH v2 2/2] imx: mx6slevk: Change to use generic board   Stefano Babic
• [U-Boot] Spansion SPI flash read timeout with AM335x   Andy Pont
  • [U-Boot] [PATCH] generic board for socfpga   Albert ARIBAUD
    • [U-Boot] [PATCHv2] generic board for socfpga   Pavel Machek
    • [U-Boot] [PATCH] watchdog disable for socfpga   Pavel Machek
    • [U-Boot] [PATCH] base addresses for more subsystems   Pavel Machek
    • [U-Boot] [PATCH] cleanup drivers/net/phy/micrel.c   Pavel Machek
    • [U-Boot] [PATCH] cleanup drivers/net/phy/micrel.c   Chin Liang See
    • [U-Boot] [PATCH] base addresses for more subsystems   Chin Liang See
    • [U-Boot] [PATCH] fix compilation of socfpga_dw_mmc   Pavel Machek
    • [U-Boot] [PATCH] fix compilation of socfpga_dw_mmc   Marek Vasut
    • [U-Boot] [PATCH] watchdog disable for socfpga   Marek Vasut
    • [U-Boot] [PATCH] watchdog disable for socfpga   Pavel Machek
    • [U-Boot] [PATCH] watchdog disable for socfpga   Marek Vasut
    • [U-Boot] [PATCH] watchdog disable for socfpga   Pavel Machek
    • [U-Boot] [PATCH] watchdog disable for socfpga   Marek Vasut
    • [U-Boot] [PATCH] watchdog disable for socfpga   Chin Liang See
    • [U-Boot] [PATCH] watchdog disable for socfpga   Chin Liang See
    • [U-Boot] [PATCH] watchdog disable for socfpga   Marek Vasut
    • [U-Boot] [PATCHv2] generic board for socfpga   Chin Liang See
• [U-Boot] [PATCH 7/8] samsung: Move s5p_goni to use exynos-common config   Przemyslaw Marczak
  • [U-Boot] [PATCH 7/8] samsung: Move s5p_goni to use exynos-common config   Simon Glass
• [U-Boot] [PATCH 8/8] samsung: Move smdkc100 to use exynos-common config   Przemyslaw Marczak
  • [U-Boot] [PATCH] arch/arm: Add individual TLB size support.   Albert ARIBAUD
    • [U-Boot] [PATCH] arch/arm: Add individual TLB size support.   Li.Xiubo at freescale.com
    • [U-Boot] [PATCH] arch/arm: Add individual TLB size support.   Albert ARIBAUD
    • [U-Boot] [PATCH] arch/arm: Add individual TLB size support.   Albert ARIBAUD
  • [U-Boot] relocation problem on powerpc   Joakim Tjernlund
    • [U-Boot] [PATCH v1 0/2] usb: dfu: am335x: allow dfu in fullspeed mode only   Heiko Schocher
    • [U-Boot] [PATCH v1 1/2] usb: dfu: add config option to use in dfu mode fullspeed only   Heiko Schocher
    • [U-Boot] [PATCH v1 1/2] usb: dfu: add config option to use in dfu mode fullspeed only   Bin Liu
    • [U-Boot] [PATCH v1 1/2] usb: dfu: add config option to use in dfu mode fullspeed only   Lukasz Majewski
    • [U-Boot] [PATCH v1 1/2] usb: dfu: add config option to use in dfu mode fullspeed only   Heiko Schocher
    • [U-Boot] [PATCH v1 1/2] usb: dfu: add config option to use in dfu mode fullspeed only   Bin Liu
    • [U-Boot] [PATCH v1 1/2] usb: dfu: add config option to use in dfu mode fullspeed only   Heiko Schocher
    • [U-Boot] [PATCH v1 2/2] arm: am335x: siemens board use in DFU mode fullspeed only   Heiko Schocher
    • [U-Boot] [PATCH v1 0/2] usb: dfu: am335x: allow dfu in fullspeed mode only   Lukasz Majewski
    • [U-Boot] [PATCH v1 0/2] usb: dfu: am335x: allow dfu in fullspeed mode only   Bin Liu
    • [U-Boot] [PATCH v1 0/2] usb: dfu: am335x: allow dfu in fullspeed mode only   Lukasz Majewski
    • [U-Boot] [PATCH v1 0/2] usb: dfu: am335x: allow dfu in fullspeed mode only   Heiko Schocher
    • [U-Boot] [PATCH v1 0/2] usb: dfu: am335x: allow dfu in fullspeed mode only   Stockmann, Lukas
• [U-Boot] [PATCH v7 2/2] net: fec_mxc: Poll FEC_TBD_READY after polling TDAR   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: updated notes regarding NAND boot errata   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: base SPL MMDC calibration on width and size not board   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: add GW5520 support   Stefano Babic
• [U-Boot] [PATCH] sort drivers/mmc/Makefile   Pavel Machek
  • [U-Boot] [PATCH] sort drivers/mmc/Makefile   Chin Liang See
• [U-Boot] [PATCH 02/11] imx: ventana: added cputype env var   Stefano Babic
• [U-Boot] [PATCH] cleanup disk/part.c whitespace   Pavel Machek
  • [U-Boot] cleanup disk/part.c whitespace   Tom Rini
    • [U-Boot] relocation problem on powerpc   Joakim Tjernlund
      • [U-Boot] relocation problem on powerpc   Chris Packham
      • [U-Boot] [RFC PATCH v1] powerpc: add --bss-plt to LDFLAGS   Chris Packham
      • [U-Boot] [RFC PATCH v1] powerpc: add --bss-plt to LDFLAGS   Joakim Tjernlund
      • [U-Boot] [RFC PATCH v1] powerpc: add --bss-plt to LDFLAGS   York Sun
      • [U-Boot] [RFC PATCH v1] powerpc: add --bss-plt to LDFLAGS   Joakim Tjernlund
      • [U-Boot] [RFC PATCH v1] powerpc: add --bss-plt to LDFLAGS   York Sun
• [U-Boot] [PATCH V4 00/19] Introduce cm-fx6 board   Stefano Babic
  • [U-Boot] [PATCH V4 00/19] Introduce cm-fx6 board   Nikita Kiryanov
    • [U-Boot] [PATCH V4 00/19] Introduce cm-fx6 board   Stefano Babic
      • [U-Boot] [PATCH] mtd: nand: am335x: Fix 'bit-flip' errors in SPL   Rostislav Lisovy
• [U-Boot] [PATCH 0/2] imx: ventana: Add pci fixup for PLX switch   Stefano Babic
• [U-Boot] [PATCH 1/2] pci: add support for board_pci_fixup_dev function   Stefano Babic
• [U-Boot] [PATCH 2/2] imx: ventana: add pci fixup for PLX PEX860x switch GPIO   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: Avoid undefined behaviour   Stefano Babic
  • [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler   Albert ARIBAUD
    • [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler   Jeroen Hofstee
    • [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler   Albert ARIBAUD
    • [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler   Jeroen Hofstee
    • [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler   Jeroen Hofstee
    • [U-Boot] [PATCH v2 7/8] Makefile: default to cc for host compiler   Masahiro Yamada
• [U-Boot] [PATCH] iMX6: Disable the L2 before chaning the PL310 latency   Stefano Babic
• [U-Boot] [PATCH] imximage: Fix imximage IVT bug for EIM-NOR boot   Stefano Babic
  • [U-Boot] [PATCH] imx6: add Bachmann OT1200 board   Christian Gmeiner
  • [U-Boot] [PATCH] imx6: add Bachmann OT1200 board   Christian Gmeiner
  • [U-Boot] [PATCH] imx6: add Bachmann OT1200 board   Stefano Babic
  • [U-Boot] [PATCH] imx6: add Bachmann OT1200 board   Stefano Babic
  • [U-Boot] [PATCH] imx6: add Bachmann OT1200 board   Christian Gmeiner
• [U-Boot] [PATCH] mx6: Fix ECSPI typo in soc_boot_modes   Stefano Babic
• [U-Boot] [PATCH 1/2] arm: vf610: lpuart: fix status register handling   Stefano Babic
• [U-Boot] [PATCH 2/2] arm: vf610: lpuart: disable FIFO on initializaton   Stefano Babic
• [U-Boot] [PATCH] mx6dlsabresd: Use its own DCD table   Stefano Babic
• [U-Boot] [PATCH] imx: nitrogen6x: Replace 'fatload' by 'load' command in env settings to be filesystem independent   Stefano Babic
• [U-Boot] [PATCH v3 1/3] mx6: imx-regs: Provide a structure for GPC registers   Stefano Babic
• [U-Boot] [PATCH v3 2/3] pcie_imx: Add mx6solox support   Stefano Babic
• [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support   Stefano Babic
  • [U-Boot] [PATCH] README.imximage: Fix the maximum DCD size   Fabio Estevam
• [U-Boot] [PATCH] README.imximage: Fix the maximum DCD size   Stefano Babic
  • [U-Boot] [PATCH v2] README.imximage: Fix the maximum DCD size   Fabio Estevam
  • [U-Boot] [PATCH v2] README.imximage: Fix the maximum DCD size   Stefano Babic
• [U-Boot] commit 83e359adf9f578a58f20daf2e4425a754defac7b breaks mmc   Felipe Balbi
  • [U-Boot] commit 83e359adf9f578a58f20daf2e4425a754defac7b breaks mmc   Felipe Balbi
    • [U-Boot] commit 83e359adf9f578a58f20daf2e4425a754defac7b breaks mmc   Peter A. Bigot
• [U-Boot] Please pull u-boot-x86.git branch 'buildman'   Simon Glass
  • [U-Boot] Please pull u-boot-x86.git branch 'buildman'   Tom Rini
    • [U-Boot] [PATCH] imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support   Ye.Li
    • [U-Boot] [PATCH] imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support   Stefano Babic
    • [U-Boot] [PATCH] imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support   Li Ye-B37916
    • [U-Boot] [PATCH] imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support   Stefano Babic
  • [U-Boot] Policy for porting drivers from Linux   Chris Packham
    • [U-Boot] [PATCH 0/3] Add QSPI support for mx6sxsabresd board   Peng Fan
    • [U-Boot] [PATCH 2/3] QSPI: Enable write device registers   Peng Fan
    • [U-Boot] [PATCH 1/3] ARM:MX6SX Add QuadSPI support for mx6sxsabresd   Peng Fan
    • [U-Boot] [PATCH 1/3] ARM:MX6SX Add QuadSPI support for mx6sxsabresd   Fabio Estevam
    • [U-Boot] [PATCH 1/3] ARM:MX6SX Add QuadSPI support for mx6sxsabresd   Peng Fan
    • [U-Boot] [PATCH 3/3] QSPI: Enable QSPI AHB read for MX6SX   Peng Fan
    • [U-Boot] [PATCH] powerpc/BSC9131RDB: add mtdparts suppport   Ashish Kumar
    • [U-Boot] [PATCH] powerpc/BSC9132qds: add mtdparts suppport   Ashish Kumar
    • [U-Boot] [PATCH v2 0/2] usb: dfu: am335x: allow dfu in fullspeed mode only   Heiko Schocher
    • [U-Boot] [PATCH v2 1/2] usb: dfu: add fullspeed support for DFU   Heiko Schocher
    • [U-Boot] [PATCH v2 1/2] usb: dfu: add fullspeed support for DFU   Bin Liu
    • [U-Boot] [PATCH v2 1/2] usb: dfu: add fullspeed support for DFU   Lukasz Majewski
    • [U-Boot] [PATCH v2 1/2] usb: dfu: add fullspeed support for DFU   Lukasz Majewski
    • [U-Boot] [PATCH v2 2/2] arm: am335x: siemens board use in DFU mode fullspeed only   Heiko Schocher
    • [U-Boot] [PATCH v2 2/2] arm: am335x: siemens board use in DFU mode fullspeed only   Lukasz Majewski
    • [U-Boot] [GIT PULL] microblaze fixes   Michal Simek
    • [U-Boot] [GIT PULL] microblaze fixes   Tom Rini
    • [U-Boot] [PATCH 1/4] imx: mx6slevk: Add I2C1 support   Ye.Li
    • [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Ye.Li
    • [U-Boot] [PATCH 4/4] imx: mx6: Set Pfuze mode to decrease power number for DSM   Ye.Li
    • [U-Boot] [PATCH 4/4] imx: mx6: Set Pfuze mode to decrease power number for DSM   Fabio Estevam
    • [U-Boot] [PATCH 3/4] imx: mx6sabresd: Add clear print for pfuze200   Ye.Li
    • [U-Boot] [PATCH] kconfig: add sanity checks for SPL configuration   Masahiro Yamada
    • [U-Boot] [PATCH v2] kconfig: add sanity checks for SPL configuration   Masahiro Yamada
    • [U-Boot] [U-Boot, v2] kconfig: add sanity checks for SPL configuration   Tom Rini
    • [U-Boot] [PATCH] imx: Fix build of mx6sxsabresd   Stefano Babic
    • [U-Boot] [U-boot] [Patch v2] ARM: keystone: ddr3: workaround for ddr3a/3b memory issue   Ivan Khoronzhuk
    • [U-Boot] [U-Boot, U-boot, v2] ARM: keystone: ddr3: workaround for ddr3a/3b memory issue   Tom Rini
    • [U-Boot] [PATCH v3 0/8] add clang support for some ARM boards   Jeroen Hofstee
    • [U-Boot] [PATCH v3 7/8] Makefile: default to cc for host compiler   Jeroen Hofstee
    • [U-Boot] [PATCH v3 8/8] README.clang: build command with clang   Jeroen Hofstee
    • [U-Boot] [PATCH v3 0/8] add clang support for some ARM boards   Albert ARIBAUD
    • [U-Boot] [PATCH v3 0/8] add clang support for some ARM boards   Jeroen Hofstee
    • [U-Boot] [PATCH v3 0/8] add clang support for some ARM boards   Albert ARIBAUD
    • [U-Boot] [PATCH v3 0/8] add clang support for some ARM boards   Jeroen Hofstee
    • [U-Boot] [PATCH v3 0/8] add clang support for some ARM boards   Albert ARIBAUD
    • [U-Boot] [PATCH v3 0/8] add clang support for some ARM boards   Jeroen Hofstee
    • [U-Boot] [PATCH v3 0/8] add clang support for some ARM boards   Albert ARIBAUD
  • [U-Boot] [U-Boot, v2] buildman: Create parent directories as necessary   Simon Glass
    • [U-Boot] Please pull u-boot-dm.git   Simon Glass
      • [U-Boot] Please pull u-boot-dm.git   Simon Glass
      • [U-Boot] Please pull u-boot-dm.git   Tom Rini
• [U-Boot] arm kirkwood pending patches   Luka Perkov
  • [U-Boot] arm kirkwood pending patches   Prafulla Wadaskar
• [U-Boot] u-boot-socfpga repository   Marek Vasut
  • [U-Boot] u-boot-socfpga repository   Masahiro Yamada
    • [U-Boot] u-boot-socfpga repository   Michal Simek
      • [U-Boot] u-boot-socfpga repository   Masahiro Yamada
      • [U-Boot] U-Boot panasonic repo   Marek Vasut
      • [U-Boot] U-Boot panasonic repo   Michal Simek
      • [U-Boot] U-Boot panasonic repo   Marek Vasut
      • [U-Boot] U-Boot panasonic repo   Michal Simek
      • [U-Boot] U-Boot panasonic repo   Masahiro Yamada
      • [U-Boot] U-Boot panasonic repo   Albert ARIBAUD
      • [U-Boot] U-Boot panasonic repo   Masahiro YAMADA
      • [U-Boot] U-Boot panasonic repo   Wolfgang Denk
      • [U-Boot] U-Boot panasonic repo   Masahiro Yamada
      • [U-Boot] U-Boot panasonic repo   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   Pavel Machek
      • [U-Boot] u-boot-socfpga repository   Marek Vasut
      • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
      • [U-Boot] u-boot-socfpga repository   Marek Vasut
      • [U-Boot] u-boot-socfpga repository   Pavel Machek
      • [U-Boot] u-boot-socfpga repository   Chin Liang See
      • [U-Boot] u-boot-socfpga repository   Chin Liang See
      • [U-Boot] u-boot-socfpga repository   Tom Rini
      • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   Tom Rini
      • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   Marek Vasut
      • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
      • [U-Boot] u-boot-socfpga repository   Marek Vasut
      • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
      • [U-Boot] u-boot-socfpga repository   Tom Rini
      • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
      • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
      • [U-Boot] u-boot-socfpga repository   Michael Trimarchi
      • [U-Boot] u-boot-socfpga repository   David Hawkins
      • [U-Boot] u-boot-socfpga repository   Michael Trimarchi
      • [U-Boot] u-boot-socfpga repository   David Hawkins
      • [U-Boot] u-boot-socfpga repository   Michael Trimarchi
      • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
      • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   Chin Liang See
      • [U-Boot] mainline u-boot on socfpga   Pavel Machek
      • [U-Boot] u-boot-socfpga repository   David Hawkins
      • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
      • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   David Hawkins
      • [U-Boot] u-boot-socfpga repository   David Hawkins
      • [U-Boot] u-boot-socfpga repository   Michal Simek
      • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   Marek Vasut
      • [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Peng Fan
      • [U-Boot] [PATCH v2 2/2] imx:mx6sxsabresd add qspi support   Peng Fan
      • [U-Boot] [PATCH v2 2/2] imx:mx6sxsabresd add qspi support   Peng.Fan at freescale.com
      • [U-Boot] [PATCH v2 1/4] imx: mx6slevk: Add I2C1 support   Ye.Li
      • [U-Boot] [PATCH v2 2/4] imx: mx6slevk: Add PMIC Pfuze support   Ye.Li
      • [U-Boot] [PATCH v2 3/4] imx: mx6sabresd: Add clear print for pfuze200   Ye.Li
      • [U-Boot] [PATCH v2 4/4] imx: mx6: Set Pfuze mode to decrease power number for DSM   Ye.Li
      • [U-Boot] [PATCH v2 4/4] imx: mx6: Set Pfuze mode to decrease power number for DSM   Fabio Estevam
      • [U-Boot] [PATCH v2 4/4] imx: mx6: Set Pfuze mode to decrease power number for DSM   Li Ye-B37916
• [U-Boot] [PATCH 09/10] kconfig: move CONFIG_OF_* to Kconfig   Jaehoon Chung
  • [U-Boot] [PATCH v3 1/4] imx: mx6slevk: Add I2C1 support   Ye.Li
  • [U-Boot] [PATCH v3 2/4] imx: mx6slevk: Add PMIC Pfuze support   Ye.Li
  • [U-Boot] [PATCH v3 3/4] imx: mx6sabresd: Add clear print for pfuze200   Ye.Li
  • [U-Boot] [PATCH v3 3/4] imx: mx6sabresd: Add clear print for pfuze200   Stefano Babic
  • [U-Boot] [PATCH v3 3/4] imx: mx6sabresd: Add clear print for pfuze200   Li Ye-B37916
  • [U-Boot] [PATCH v3 4/4] imx: mx6: Set Pfuze mode to decrease power number for DSM   Ye.Li
  • [U-Boot] [PATCH v3 1/4] imx: mx6slevk: Add I2C1 support   Stefano Babic
  • [U-Boot] [PATCH v3 1/4] imx: mx6slevk: Add I2C1 support   Li Ye-B37916
  • [U-Boot] [PATCH 1/2] fsl_sec : Add hardware accelerated SHA256 and SHA1   Ruchika Gupta
  • [U-Boot] [PATCH 1/2] fsl_sec : Add hardware accelerated SHA256 and SHA1   York Sun
  • [U-Boot] [PATCH 2/2] mpc85xx: configs - Add hash command in freescale platforms   Ruchika Gupta
  • [U-Boot] [PATCH 2/2] mpc85xx: configs - Add hash command in freescale platforms   York Sun
  • [U-Boot] [PATCH 2/2] mpc85xx: configs - Add hash command in freescale platforms   Ruchika Gupta
  • [U-Boot] [Uboot 2012.10] AMCC's Riviera (PowerPC) linking .bss section at 0x10?   DangNhat PhamHuu
    • [U-Boot] [U-Boot, PATCH v3 1/2] arm: BeagleBone Black: enable fastboot support   Dileep Katta
    • [U-Boot] [U-Boot, PATCH v3 2/2] fastboot: Flash command support   Dileep Katta
    • [U-Boot] [U-Boot, PATCH v3 2/2] fastboot: Flash command support   Wolfgang Denk
    • [U-Boot] [U-Boot, PATCH v3 2/2] fastboot: Flash command support   Dileep Katta
    • [U-Boot] [PATCH 2/2 v2] fastboot: Flash command support   Dileep Katta
      • [U-Boot] [PATCH] am335x_evm: Add boot script support to am335x_evm   Guillaume GARDET
      • [U-Boot] [PATCH] am335x_evm: Add boot script support to am335x_evm   Guillaume Gardet
      • [U-Boot] am335x_evm: Add boot script support to am335x_evm   Tom Rini
• [U-Boot] [PATCH 5/8] config: Move arndale to use common exynos5250 file   Minkyu Kang
  • [U-Boot] [PATCH 5/8] config: Move arndale to use common exynos5250 file   Simon Glass
• [U-Boot] [PATCH 3/8] exynos: Move common smdk5420 things to common file   Minkyu Kang
  • [U-Boot] [PATCH 3/8] exynos: Move common smdk5420 things to common file   Simon Glass
    • [U-Boot] [PATCH V2] sf: Add support for flag status register on Micron chips   Mingkai.Hu
• [U-Boot] [PATCH v3 3/4] mtd: nand: add Freescale vf610_nfc driver   Stefano Babic
• [U-Boot] [PATCH v3 3/4] mtd: nand: add Freescale vf610_nfc driver   Stefano Babic
  • [U-Boot] [PATCH V2] sf: Add support for flag status register on Micron chips   Mingkai.Hu
  • [U-Boot] [PATCH] imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board   Guillaume GARDET
  • [U-Boot] [PATCH] imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board   Eric Nelson
  • [U-Boot] [PATCH] imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board   Eric Nelson
  • [U-Boot] [PATCH] imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board   Stefano Babic
  • [PATCH] versatileqemu ual build   Jeroen Hofstee
• [U-Boot] [PATCH v4 0/2] arm: vf610: add NAND flash support   Stefan Agner
• [U-Boot] [PATCH v4 1/2] mtd: nand: add Freescale vf610_nfc driver   Stefan Agner
  • [U-Boot] [PATCH v4 1/2] mtd: nand: add Freescale vf610_nfc driver   Bill Pringlemeir
    • [U-Boot] [PATCH v4 1/2] mtd: nand: add Freescale vf610_nfc driver   Stefano Babic
  • [U-Boot] [PATCH v4 1/2] mtd: nand: add Freescale vf610_nfc driver   Stefano Babic
• [U-Boot] [PATCH v4 2/2] arm: vf610: add NAND support for vf610twr   Stefan Agner
  • [U-Boot] [PATCH] usb: dfu: thor: gadget: Remove dead code   Lukasz Majewski
  • [U-Boot] [PATCH] usb: dfu: thor: gadget: Remove dead code   Marek Vasut
  • [U-Boot] [PATCH] usb: dfu: thor: gadget: Remove dead code   Jeroen Hofstee
  • [U-Boot] [PATCH] usb: dfu: thor: gadget: Remove dead code   Marek Vasut
  • [U-Boot] [PATCH] usb: dfu: thor: gadget: Remove dead code   Heiko Schocher
  • [U-Boot] [PATCH] usb: dfu: thor: gadget: Remove dead code   Lukasz Majewski
  • [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Albert ARIBAUD
    • [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Stephen Warren
    • [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Simon Glass
    • [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Albert ARIBAUD
    • [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Simon Glass
• [U-Boot] [PATCH 1/7] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined   Hans de Goede
  • [U-Boot] [PATCH 1/7] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined   Ian Campbell
    • [U-Boot] [PATCH 1/7] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined   Chen-Yu Tsai
• [U-Boot] fallback to other boot command (UBootBootCountLimit )   Arvid E. Picciani
  • [U-Boot] fallback to other boot command (UBootBootCountLimit )   Fabio Estevam
    • [U-Boot] [PATCH 1/2] driver/ddr/fsl: Fix DDR4 driver   York Sun
    • [U-Boot] [PATCH 2/2] board/ls1021aqds_d4: Add DDR4 support   York Sun
    • [U-Boot] [PATCH 2/2] board/ls1021aqds_d4: Add DDR4 support   Otavio Salvador
    • [U-Boot] [PATCH 2/2] board/ls1021aqds_d4: Add DDR4 support   York Sun
    • [U-Boot] [PATCH v10] nand/denali: Adding Denali NAND driver support   Chin Liang See
    • [U-Boot] [PATCH v10] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
    • [U-Boot] [PATCH v10] nand/denali: Adding Denali NAND driver support   Masahiro YAMADA
    • [U-Boot] [PATCH v10] nand/denali: Adding Denali NAND driver support   Scott Wood
    • [U-Boot] [PATCH v10] nand/denali: Adding Denali NAND driver support   Masahiro Yamada
    • [U-Boot] [PATCH] test: dfu: script: wrong md5sum on nand partitions   Heiko Schocher
    • [U-Boot] [PATCH] test: dfu: script: wrong md5sum on nand partitions   Stephen Warren
    • [U-Boot] [PATCH] test: dfu: script: wrong md5sum on nand partitions   Heiko Schocher
    • [U-Boot] [PATCH] test: dfu: script: wrong md5sum on nand partitions   Lukasz Majewski
    • [U-Boot] [PATCH] test: dfu: script: wrong md5sum on nand partitions   Heiko Schocher
    • [U-Boot] [PATCH] test: dfu: script: wrong md5sum on nand partitions   Lukasz Majewski
    • [U-Boot] [PATCH] test: dfu: script: wrong md5sum on nand partitions   Scott Wood
    • [U-Boot] [PATCH] powerpc/t4rdb: Add support of CPLD   Chunhe Lan
    • [U-Boot] [PATCH v2 1/1] net: dns: fix for DNS queries sent to the wrong MAC address   Gerhard Sittig
    • [U-Boot] [U-Boot, v2, 1/1] net: dns: fix for DNS queries sent to the wrong MAC address   Tom Rini
    • [U-Boot] [PATCH] powerpc/mpc85xx: Add DSP side awareness for Freescale Heterogeneous SoCs   Shaveta Leekha
    • [U-Boot] [PATCH] powerpc/mpc85xx: Add DSP side awareness for Freescale Heterogeneous SoCs   York Sun
  • [U-Boot] boot count feature with eMMC booting   jags gediya
    • [U-Boot] boot count feature with eMMC booting   Tom Rini
• [U-Boot] [PATCH v5 0/2] arm: vf610: add NAND flash support   Stefan Agner
  • [U-Boot] [PATCH v5 1/2] mtd: nand: add Freescale vf610_nfc driver   Stefan Agner
    • [U-Boot] [PATCH v5 1/2] mtd: nand: add Freescale vf610_nfc driver   Stefano Babic
• [U-Boot] [PATCH v5 2/2] arm: vf610: add NAND support for vf610twr   Stefan Agner
  • [U-Boot] [PATCH v5 2/2] arm: vf610: add NAND support for vf610twr   Stefano Babic
• [U-Boot] A minor question on a Driver Model function   Masahiro Yamada
  • [U-Boot] A minor question on a Driver Model function   Simon Glass
    • [U-Boot] A minor question on a Driver Model function   Igor Grinberg
      • [U-Boot] A minor question on a Driver Model function   Masahiro Yamada
      • [U-Boot] A minor question on a Driver Model function   Igor Grinberg
      • [U-Boot] A minor question on a Driver Model function   Bill Pringlemeir
      • [U-Boot] A minor question on a Driver Model function   Igor Grinberg
      • [U-Boot] A minor question on a Driver Model function   Bill Pringlemeir
      • [U-Boot] A minor question on a Driver Model function   Igor Grinberg
      • [U-Boot] A minor question on a Driver Model function   Masahiro Yamada
      • [U-Boot] A minor question on a Driver Model function   Igor Grinberg
    • [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
      • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
  • [U-Boot] [PULL] Please pull u-boot-imx   Albert ARIBAUD
    • [U-Boot] [PULL] Please pull u-boot-imx   Fabio Estevam
    • [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
  • [U-Boot] [PULL] Please pull u-boot-imx   Albert ARIBAUD
    • [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
      • [U-Boot] [PULL] Please pull u-boot-imx   Albert ARIBAUD
    • [U-Boot] [PULL] Please pull u-boot-imx   Nikita Kiryanov
  • [U-Boot] [PULL] Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] (no subject)   Mariusz Boguszewski
  • [U-Boot] (no subject)   Michael Trimarchi
    • [U-Boot] (no subject)   Michael Trimarchi
• [U-Boot] u-boot-socfpga repository   Wolfgang Denk
  • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
    • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
      • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
      • [U-Boot] u-boot-socfpga repository   Dinh Nguyen
      • [U-Boot] u-boot-socfpga repository   Tom Rini
      • [U-Boot] u-boot-socfpga repository   Chin Liang See
      • [U-Boot] u-boot-socfpga repository   Marek Vasut
      • [U-Boot] u-boot-socfpga repository   Chin Liang See
      • [U-Boot] u-boot-socfpga repository   Marek Vasut
      • [U-Boot] u-boot-socfpga repository   Wolfgang Denk
• [U-Boot] [PATCH 0/8] U-Boot port to Xtensa architecture   Max Filippov
  • [U-Boot] [PATCH v2 0/4] Refactoring the type defs in Kconfig and move CONFIG_ARM64 to Kconfig   Masahiro Yamada
  • [U-Boot] [PATCH v2 1/4] kconfig: add CONFIG_SYS_{ARCH, CPU, ...} type def to arch/Kconfig   Masahiro Yamada
  • [U-Boot] [PATCH v2 1/4] kconfig: add CONFIG_SYS_{ARCH, CPU, ...} type def to arch/Kconfig   Tom Rini
  • [U-Boot] [PATCH v2 2/4] kconfig: remove redundant "string" type in arch and board Kconfigs   Masahiro Yamada
  • [U-Boot] [PATCH v2 2/4] kconfig: remove redundant "string" type in arch and board Kconfigs   Tom Rini
  • [U-Boot] [PATCH v2 3/4] vexpress64: kconfig: consolidate CONFIG_TARGET_VEXPRESS_AEMV8A_SEMI   Masahiro Yamada
  • [U-Boot] [U-Boot, v2, 3/4] vexpress64: kconfig: consolidate CONFIG_TARGET_VEXPRESS_AEMV8A_SEMI   Tom Rini
  • [U-Boot] [PATCH v2 4/4] kconfig: armv8: move CONFIG_ARM64 to Kconfig   Masahiro Yamada
  • [U-Boot] [U-Boot, v2, 4/4] kconfig: armv8: move CONFIG_ARM64 to Kconfig   Tom Rini
  • [U-Boot] [PATCH v2 0/4] Refactoring the type defs in Kconfig and move CONFIG_ARM64 to Kconfig   Masahiro YAMADA
  • [U-Boot] [PATCH 1/2] mx6sxsabresd: Staticize i2c_pad_info1   Fabio Estevam
  • [U-Boot] [PATCH 2/2] mx6qsabreauto: Staticize when possible   Fabio Estevam
  • [U-Boot] [PATCH 2/2] mx6qsabreauto: Staticize when possible   Stefano Babic
  • [U-Boot] [PATCH 1/2] mx6sxsabresd: Staticize i2c_pad_info1   Stefano Babic
• [U-Boot] Generic bootcmd handling: Missing 'scsi scan'   Hans de Goede
  • [U-Boot] Generic bootcmd handling: Missing 'scsi scan'   Stephen Warren
    • [U-Boot] Generic bootcmd handling: Missing 'scsi scan'   Hans de Goede
      • [U-Boot] Generic bootcmd handling: Missing 'scsi scan'   Stephen Warren
      • [U-Boot] [PATCH v2 1/4] Reactivate the tracing feature   Simon Glass
      • [U-Boot] [PATCH v2 2/4] sandbox: Disable Ctrl-C   Simon Glass
      • [U-Boot] [U-Boot,v2,2/4] sandbox: Disable Ctrl-C   Tom Rini
      • [U-Boot] [PATCH v2 3/4] test: Remove tabs from trace test   Simon Glass
      • [U-Boot] [U-Boot,v2,3/4] test: Remove tabs from trace test   Tom Rini
      • [U-Boot] [PATCH v2 4/4] test: Add a test for command repeat   Simon Glass
      • [U-Boot] [U-Boot,v2,4/4] test: Add a test for command repeat   Tom Rini
      • [U-Boot] [U-Boot,v2,1/4] Reactivate the tracing feature   Tom Rini
      • [U-Boot] [PATCH v2 0/16] samsung: Use common config files with Samsung boards (please test)   Simon Glass
      • [U-Boot] [PATCH v2 01/16] Exynos: Use 900MHz ARM frequency in SPL for peach_pit   Simon Glass
      • [U-Boot] [PATCH v2 02/16] exynos5: Enable data cache   Simon Glass
      • [U-Boot] [PATCH v2 03/16] cros_ec: power: Add a tunnelled version of the tps65090 driver   Simon Glass
      • [U-Boot] [PATCH v2 04/16] cros_ec: exynos: Use the correct tps65090 driver in each case   Simon Glass
      • [U-Boot] [PATCH v2 05/16] dm: exynos: Split out the cros_ec drivers   Simon Glass
      • [U-Boot] [PATCH v2 06/16] exynos: dts: Add device tree node for cros_ec keyboard   Simon Glass
      • [U-Boot] [PATCH v2 07/16] exynos: Rename -dt config files to -common   Simon Glass
      • [U-Boot] [PATCH v2 08/16] exynos: Move common exynos settings into a common file   Simon Glass
      • [U-Boot] [PATCH v2 09/16] exynos: Move common smdk5420 things to common file   Simon Glass
      • [U-Boot] [PATCH v2 10/16] exynos: config: Move cros_ec and tps65090 out of smdk boards   Simon Glass
      • [U-Boot] [PATCH v2 11/16] config: Move arndale to use common exynos5250 file   Simon Glass
      • [U-Boot] [PATCH v2 12/16] config: Move smdkv310 to use common exynos4 file   Simon Glass
      • [U-Boot] [PATCH v2 13/16] samsung: Enable device tree for s5p_goni   Simon Glass
      • [U-Boot] [PATCH v2 13/16] samsung: Enable device tree for s5p_goni   Robert Baldyga
      • [U-Boot] [PATCH v2 14/16] samsung: Enable device tree for smdkc100   Simon Glass
      • [U-Boot] [PATCH v2 15/16] exynos: Enable pre-relocation malloc()   Simon Glass
      • [U-Boot] [PATCH v2 16/16] wip   Simon Glass
      • [U-Boot] [PATCH v2 16/16] wip   Simon Glass
      • [U-Boot] [PATCH v8 0/12] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
      • [U-Boot] [PATCH v8 01/12] dm: exynos: dts: Convert /include/ to #include   Simon Glass
      • [U-Boot] [PATCH v8 02/12] dm: exynos: Bring in pinctrl dts files from Linux kernel   Simon Glass
      • [U-Boot] [PATCH v8 03/12] dm: exynos: dts: Remove unused pinctrl information to save space   Simon Glass
      • [U-Boot] [PATCH v8 04/12] dm: exynos: dts: Adjust device tree files for U-Boot   Simon Glass
      • [U-Boot] [PATCH v8 05/12] dm: exynos: Add pinctrl settings for smdkc100   Simon Glass
      • [U-Boot] [PATCH v8 06/12] dm: exynos: Add pinctrl settings for s5p_goni   Simon Glass
      • [U-Boot] [PATCH v8 07/12] dm: exynos: Move smdkc100 to generic board   Simon Glass
      • [U-Boot] [PATCH v8 08/12] dm: exynos: Move s5p_goni to generic board   Simon Glass
      • [U-Boot] [PATCH v8 08/12] dm: exynos: Move s5p_goni to generic board   Robert Baldyga
      • [U-Boot] [PATCH v8 09/12] dm: exynos: Tidy up GPIO headers   Simon Glass
      • [U-Boot] [PATCH v8 10/12] dm: exynos: Tidy up GPIO defines   Simon Glass
      • [U-Boot] [PATCH v8 11/12] dm: exynos: Make sure that GPIOs are requested   Simon Glass
      • [U-Boot] [PATCH v8 12/12] dm: exynos: gpio: Convert to driver model   Simon Glass
      • [U-Boot] [PATCH v6 0/2] Introduce driver model serial uclass (exynos only)   Simon Glass
      • [U-Boot] [PATCH v6 1/2] dm: exynos: Mark exynos5 console as pre-reloc   Simon Glass
      • [U-Boot] [PATCH v6 2/2] dm: exynos: Move serial to driver model   Simon Glass
• [U-Boot] [PATCH 0/25] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
  • [U-Boot] [PATCH 1/2] buildman: Fix the logic for the bloat command   Simon Glass
  • [U-Boot] [PATCH 2/2] patman: Add a -m option to avoid copying the maintainers   Simon Glass
  • [U-Boot] [PATCH 2/2] patman: Add a -m option to avoid copying the maintainers   Simon Glass
  • [U-Boot] [PATCH 1/2] buildman: Fix the logic for the bloat command   Simon Glass
  • [U-Boot] [PATCH v2 1/4] imx: mx6sabre common: Factorize the Pfuze init function   Ye.Li
  • [U-Boot] [PATCH v2 2/4] imx: mx6sabresd: Use the pfuze common init function   Ye.Li
  • [U-Boot] [PATCH v2 3/4] imx: mx6sxsabresd: Use the pfuze common init function   Ye.Li
  • [U-Boot] [PATCH v2 4/4] imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support   Ye.Li
  • [U-Boot] [PATCH 0/3] imx:mx6: change CONFIG_SYS_FSL_ESDHC_ADDR   Peng Fan
  • [U-Boot] [PATCH 1/3] imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDR   Peng Fan
  • [U-Boot] [PATCH 1/3] imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDR   Stefano Babic
  • [U-Boot] [PATCH 2/3] imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDR   Peng Fan
  • [U-Boot] [PATCH 2/3] imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDR   Stefano Babic
  • [U-Boot] [PATCH 3/3] imx:mx6slevk: change CONFIG_SYS_FSL_ESDHC_ADDR   Peng Fan
  • [U-Boot] [PATCH 3/3] imx:mx6slevk: change CONFIG_SYS_FSL_ESDHC_ADDR   Stefano Babic
  • [U-Boot] [PATCH v4] imx: mx6sabre: pfuze: Add clear print for pfuze200   Ye.Li
  • [U-Boot] [PATCH v4] imx: mx6: Set Pfuze mode to decrease power number for DSM   Ye.Li
  • [U-Boot] [PATCH 1/3] imx: mx6sololite: Add I2C1 pad settings   Ye.Li
  • [U-Boot] [PATCH 2/3] imx: mx6slevk: Add I2C1 support   Ye.Li
  • [U-Boot] [PATCH 3/3] imx: mx6slevk: Add PMIC Pfuze support   Ye.Li
  • [U-Boot] [PATCH 1/2][v2] fsl_sec: Add hardware accelerated SHA256 and SHA1   Ruchika Gupta
  • [U-Boot] [PATCH 2/2][v3] mpc85xx: configs - Add hash command in freescale platforms   Ruchika Gupta
  • [U-Boot] [PATCH 2/2][v2] mpc85xx: configs - Add hash command in freescale platforms   Ruchika Gupta
  • [U-Boot] [PATCH] usb: ehci-mx6: Rename the USB register base address   Ye.Li
  • [U-Boot] [PATCH] usb: ehci-mx6: Rename the USB register base address   Stefano Babic
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 02/35] net: phy: Cleanup drivers/net/phy/micrel.c   Marek Vasut
  • [U-Boot] [PATCH 03/35] net: dwc: Fix cache alignment issues   Marek Vasut
  • [U-Boot] [PATCH 03/35] net: dwc: Fix cache alignment issues   Dinh Nguyen
  • [U-Boot] [PATCH 03/35] net: dwc: Fix cache alignment issues   Marek Vasut
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Marek Vasut
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Pavel Machek
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Pavel Machek
  • [U-Boot] [PATCH 06/35] mmc: dw_mmc: Fix cache alignment issue   Marek Vasut
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Pavel Machek
  • [U-Boot] [PATCH 07/35] tools: socfpga: Add socfpga preloader signing to mkimage   Marek Vasut
  • [U-Boot] [PATCH 08/35] arm: socfpga: Complete the list of base addresses   Marek Vasut
  • [U-Boot] [PATCH 09/35] arm: socfpga: Clean up base address file   Marek Vasut
  • [U-Boot] [PATCH 09/35] arm: socfpga: Clean up base address file   Pavel Machek
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Pavel Machek
  • [U-Boot] [PATCH 10/35] arm: socfpga: Add watchdog disable for socfpga   Marek Vasut
  • [U-Boot] [PATCH 10/35] arm: socfpga: Add watchdog disable for socfpga   Dinh Nguyen
  • [U-Boot] [PATCH 10/35] arm: socfpga: Add watchdog disable for socfpga   Marek Vasut
  • [U-Boot] [PATCH 11/35] arm: socfpga: sysmgr: Clean up system manager   Marek Vasut
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Pavel Machek
  • [U-Boot] [PATCH 12/35] arm: socfpga: clock: Implant order into bit definitions   Marek Vasut
  • [U-Boot] [PATCH 12/35] arm: socfpga: clock: Implant order into bit definitions   Wolfgang Denk
  • [U-Boot] [PATCH 12/35] arm: socfpga: clock: Implant order into bit definitions   Pavel Machek
  • [U-Boot] [PATCH 12/35] arm: socfpga: clock: Implant order into bit definitions   Marek Vasut
  • [U-Boot] [PATCH 12/35] arm: socfpga: clock: Implant order into bit definitions   Wolfgang Denk
  • [U-Boot] [PATCH 12/35] arm: socfpga: clock: Implant order into bit definitions   Marek Vasut
  • [U-Boot] [PATCH 13/35] arm: socfpga: clock: Drop nonsense inlining from clock manager code   Marek Vasut
  • [U-Boot] [PATCH 13/35] arm: socfpga: clock: Drop nonsense inlining from clock manager code   Dinh Nguyen
  • [U-Boot] [PATCH 13/35] arm: socfpga: clock: Drop nonsense inlining from clock manager code   Marek Vasut
  • [U-Boot] [PATCH 14/35] arm: socfpga: clock: Add missing stubs into board file   Marek Vasut
  • [U-Boot] [PATCH 14/35] arm: socfpga: clock: Add missing stubs into board file   Dinh Nguyen
  • [U-Boot] [PATCH 14/35] arm: socfpga: clock: Add missing stubs into board file   Pavel Machek
  • [U-Boot] [PATCH 15/35] arm: socfpga: clock: Add code to read clock configuration   Marek Vasut
  • [U-Boot] [PATCH 15/35] arm: socfpga: clock: Add code to read clock configuration   Dinh Nguyen
  • [U-Boot] [PATCH 15/35] arm: socfpga: clock: Add code to read clock configuration   Marek Vasut
  • [U-Boot] [PATCH 16/35] arm: socfpga: clock: Trim down code duplication   Marek Vasut
  • [U-Boot] [PATCH 16/35] arm: socfpga: clock: Trim down code duplication   Dinh Nguyen
  • [U-Boot] [PATCH 16/35] arm: socfpga: clock: Trim down code duplication   Pavel Machek
  • [U-Boot] [PATCH 17/35] arm: socfpga: mmc: Pick the clock from clock manager   Marek Vasut
  • [U-Boot] [PATCH 17/35] arm: socfpga: mmc: Pick the clock from clock manager   Dinh Nguyen
  • [U-Boot] [PATCH 18/35] arm: socfpga: timer: Pull the timer reload value from config file   Marek Vasut
  • [U-Boot] [PATCH 18/35] arm: socfpga: timer: Pull the timer reload value from config file   Pavel Machek
  • [U-Boot] [PATCH 18/35] arm: socfpga: timer: Pull the timer reload value from config file   Dinh Nguyen
  • [U-Boot] [PATCH 19/35] arm: socfpga: reset: Add EMAC reset functions   Marek Vasut
  • [U-Boot] [PATCH 19/35] arm: socfpga: reset: Add EMAC reset functions   Pavel Machek
  • [U-Boot] [PATCH 20/35] arm: socfpga: misc: Add proper ethernet initialization   Marek Vasut
  • [U-Boot] [PATCH 21/35] arm: socfpga: misc: Add SD controller init   Marek Vasut
  • [U-Boot] [PATCH 22/35] arm: socfpga: misc: Align print_cpuinfo() output   Marek Vasut
  • [U-Boot] [PATCH 23/35] arm: socfpga: board: Correctly set ATAG position   Marek Vasut
  • [U-Boot] [PATCH 24/35] arm: socfpga: board: Align checkboard() output   Marek Vasut
  • [U-Boot] [PATCH 24/35] arm: socfpga: board: Align checkboard() output   Pavel Machek
  • [U-Boot] [PATCH 25/35] arm: socfpga: fpga: Add SoCFPGA FPGA programming interface   Marek Vasut
  • [U-Boot] [PATCH 25/35] arm: socfpga: fpga: Add SoCFPGA FPGA programming interface   Wolfgang Denk
  • [U-Boot] [PATCH 25/35] arm: socfpga: fpga: Add SoCFPGA FPGA programming interface   Marek Vasut
  • [U-Boot] [PATCH 25/35] arm: socfpga: fpga: Add SoCFPGA FPGA programming interface   Michal Simek
  • [U-Boot] [PATCH 25/35] arm: socfpga: fpga: Add SoCFPGA FPGA programming interface   Marek Vasut
  • [U-Boot] [PATCH 25/35] arm: socfpga: fpga: Add SoCFPGA FPGA programming interface   Michal Simek
  • [U-Boot] [PATCH 25/35] arm: socfpga: fpga: Add SoCFPGA FPGA programming interface   Marek Vasut
  • [U-Boot] [PATCH 26/35] arm: socfpga: reset: Add function to reset FPGA bridges   Marek Vasut
  • [U-Boot] [PATCH 26/35] arm: socfpga: reset: Add function to reset FPGA bridges   Pavel Machek
  • [U-Boot] [PATCH 27/35] arm: socfpga: sysmgr: Add FPGA bits into system manager   Marek Vasut
  • [U-Boot] [PATCH 28/35] arm: cache: Add support for write-allocate D-Cache   Marek Vasut
  • [U-Boot] [PATCH 28/35] arm: cache: Add support for write-allocate D-Cache   Pavel Machek
  • [U-Boot] [PATCH 29/35] arm: socfpga: cache: Define cacheline size   Marek Vasut
  • [U-Boot] [PATCH 29/35] arm: socfpga: cache: Define cacheline size   Pavel Machek
  • [U-Boot] [PATCH 30/35] arm: socfpga: cache: Enable D-Cache   Marek Vasut
  • [U-Boot] [PATCH 30/35] arm: socfpga: cache: Enable D-Cache   Pavel Machek
  • [U-Boot] [PATCH 31/35] arm: socfpga: cache: Enable PL310 L2 cache   Marek Vasut
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Pavel Machek
  • [U-Boot] [PATCH 32/35] arm: socfpga: scu: Add SCU register file   Marek Vasut
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Pavel Machek
  • [U-Boot] [PATCH 33/35] arm: socfpga: nic301: Add NIC-301 GPV register file   Marek Vasut
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Pavel Machek
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Marek Vasut
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Dinh Nguyen
  • [U-Boot] [PATCH 04/35] net: dwc: Make the cache handling less cryptic   Marek Vasut
  • [U-Boot] [PATCH 34/35] arm: socfpga: pl310: Map SDRAM to 0x0   Marek Vasut
  • [U-Boot] [PATCH 35/35] arm: socfpga: nic301: Add NIC-301 configuration code   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Pavel Machek
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Dinh Nguyen
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   dinguyen
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Dinh Nguyen
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Chin Liang See
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Wolfgang Denk
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Chin Liang See
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Wolfgang Denk
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   dinguyen
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Dinh Nguyen
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Pavel Machek
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Chin Liang See
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Chin Liang See
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Chin Liang See
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Chin Liang See
  • [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 01/35] net: Remove unused CONFIG_DW_SEARCH_PHY from configs   Marek Vasut
  • [U-Boot] [PATCH 01/35] net: Remove unused CONFIG_DW_SEARCH_PHY from configs   Dinh Nguyen
  • [U-Boot] [PATCH 01/35] net: Remove unused CONFIG_DW_SEARCH_PHY from configs   Marek Vasut
  • [U-Boot] [PATCH 05/35] mmc: dw_mmc: cleanups   Marek Vasut
  • [U-Boot] [PATCH 05/35] mmc: dw_mmc: cleanups   Dinh Nguyen
  • [U-Boot] [PATCH 05/35] mmc: dw_mmc: cleanups   Marek Vasut
  • [U-Boot] [PATCH 3/5] fdt: add fdt_add_display_timings(..)   Christian Gmeiner
    • [U-Boot] [PATCH v2 0/30] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
    • [U-Boot] [PATCH v2 01/30] dm: Fix repeated comment in README   Simon Glass
    • [U-Boot] [PATCH v2 01/30] dm: Fix repeated comment in README   Simon Glass
    • [U-Boot] [PATCH v2 02/30] sandbox: Convert SPI flash emulation to use sf_params   Simon Glass
    • [U-Boot] [PATCH v2 02/30] sandbox: Convert SPI flash emulation to use sf_params   Simon Glass
    • [U-Boot] [PATCH v2 03/30] sandbox: config: Enable all SPI flash chips   Simon Glass
    • [U-Boot] [PATCH v2 03/30] sandbox: config: Enable all SPI flash chips   Simon Glass
    • [U-Boot] [PATCH v2 04/30] sandbox: dts: Add a SPI device and cros_ec device   Simon Glass
    • [U-Boot] [PATCH v2 05/30] dm: spi: Move cmd device code into its own function   Simon Glass
    • [U-Boot] [PATCH v2 05/30] dm: spi: Move cmd device code into its own function   Simon Glass
    • [U-Boot] [PATCH v2 06/30] spi: Add brackets and tidy defines in spi.h   Simon Glass
    • [U-Boot] [PATCH v2 06/30] spi: Add brackets and tidy defines in spi.h   Simon Glass
    • [U-Boot] [PATCH v2 07/30] dm: spi: Add a uclass for SPI   Simon Glass
    • [U-Boot] [PATCH v2 08/30] dm: sandbox: Add a SPI emulation uclass   Simon Glass
    • [U-Boot] [PATCH v2 09/30] dm: Remove spi_init() from board_r.c when using driver model   Simon Glass
    • [U-Boot] [PATCH v2 10/30] dm: Add spi.h header to a few files   Simon Glass
    • [U-Boot] [PATCH v2 11/30] dm: spi: Adjust cmd_spi to work with driver model   Simon Glass
    • [U-Boot] [PATCH v2 12/30] dm: sandbox: spi: Move to driver model   Simon Glass
    • [U-Boot] [PATCH v2 13/30] dm: spi: Add documentation on how to convert over SPI drivers   Simon Glass
    • [U-Boot] [PATCH v2 14/30] dm: spi: Rename soft_spi.c to soft_spi_legacy.c   Simon Glass
    • [U-Boot] [PATCH v2 15/30] dm: spi: Remove SPI_INIT feature   Simon Glass
    • [U-Boot] [PATCH v2 16/30] dm: spi: Add soft_spi implementation   Simon Glass
    • [U-Boot] [PATCH v2 17/30] dm: exynos: Convert SPI to driver model   Simon Glass
    • [U-Boot] [PATCH v2 18/30] exynos: universal_c210: Move to driver model soft_spi   Simon Glass
    • [U-Boot] [PATCH v2 19/30] sf: Add an empty entry to the parameter list   Simon Glass
    • [U-Boot] [PATCH v2 20/30] sf: Tidy up public and private header files   Simon Glass
    • [U-Boot] [PATCH v2 21/30] spi: Use error return value in sf_ops   Simon Glass
    • [U-Boot] [PATCH v2 22/30] dm: sf: Add a uclass for SPI flash   Simon Glass
    • [U-Boot] [PATCH v2 23/30] dm: Convert spi_flash_probe() and 'sf probe' to use driver model   Simon Glass
    • [U-Boot] [PATCH v2 24/30] dm: sf: sandbox: Convert SPI flash driver to driver model   Simon Glass
    • [U-Boot] [PATCH v2 25/30] dm: exynos: config: Use driver model for SPI flash   Simon Glass
    • [U-Boot] [PATCH v2 26/30] dm: spi: Add tests   Simon Glass
    • [U-Boot] [PATCH v2 27/30] dm: sf: Add tests for SPI flash   Simon Glass
    • [U-Boot] [PATCH v2 28/30] dm: cros_ec: Add support for driver model   Simon Glass
    • [U-Boot] [PATCH v2 29/30] dm: sandbox: cros_ec: Move sandbox cros_ec to driver module   Simon Glass
    • [U-Boot] [PATCH v2 30/30] dm: exynos: cros_ec: Move cros_ec_spi to driver model   Simon Glass
    • [U-Boot] [PATCH v2 0/30] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
    • [U-Boot] [PATCH v2 0/30] Introduce driver model support for SPI, SPI flash, cros_ec   Jagan Teki
    • [U-Boot] [PATCH v2 0/30] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
    • [U-Boot] [PATCH 0/10] dm: imx: Add driver model support for GPIO and serial on cm_fx6   Simon Glass
    • [U-Boot] [PATCH 01/10] dm: linker_lists: Add a way to declare multiple objects   Simon Glass
    • [U-Boot] [PATCH 02/10] dm: core: Allow a list of devices to be declared in one step   Simon Glass
    • [U-Boot] [PATCH 03/10] dm: core: Allow device_bind() to used without CONFIG_OF_CONTROL   Simon Glass
    • [U-Boot] [PATCH 04/10] dm: serial: Don't require device tree to configure a console   Simon Glass
    • [U-Boot] [PATCH 05/10] dm: serial: Put common code into separate functions   Simon Glass
    • [U-Boot] [PATCH 06/10] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
    • [U-Boot] [PATCH 06/10] dm: imx: Use gpio_request() to request GPIOs   Igor Grinberg
    • [U-Boot] [PATCH 06/10] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
    • [U-Boot] [PATCH 06/10] dm: imx: Use gpio_request() to request GPIOs   Igor Grinberg
    • [U-Boot] [PATCH 07/10] imximage.cfg: Remove copyright header   Simon Glass
    • [U-Boot] [PATCH 07/10] imximage.cfg: Remove copyright header   Igor Grinberg
    • [U-Boot] [PATCH 07/10] imximage.cfg: Remove copyright header   Simon Glass
    • [U-Boot] [PATCH 08/10] dm: imx: gpio: Support driver model in MXC gpio driver   Simon Glass
    • [U-Boot] [PATCH 08/10] dm: imx: gpio: Support driver model in MXC gpio driver   Igor Grinberg
    • [U-Boot] [PATCH 08/10] dm: imx: gpio: Support driver model in MXC gpio driver   Simon Glass
    • [U-Boot] [PATCH 09/10] dm: imx: serial: Support driver model in the MXC serial driver   Simon Glass
    • [U-Boot] [PATCH 10/10] dm: imx: Move cm_fx6 to use driver model for serial and GPIO   Simon Glass
    • [U-Boot] [PATCH 10/10] dm: imx: Move cm_fx6 to use driver model for serial and GPIO   Igor Grinberg
    • [U-Boot] [PATCH 10/10] dm: imx: Move cm_fx6 to use driver model for serial and GPIO   Simon Glass
    • [U-Boot] [PATCH 1/3] edid: add function to convert edid to fb_videomode   Christian Gmeiner
    • [U-Boot] [PATCH 2/3] fdt: add fdt_add_display_timings(..) and friends   Christian Gmeiner
    • [U-Boot] [PATCH 2/3] fdt: add fdt_add_display_timings(..) and friends   Simon Glass
    • [U-Boot] [PATCH 3/3] ot1200: patch dts with EDID data   Christian Gmeiner
    • [U-Boot] [PATCH v3] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board   nitin.garg at freescale.com
    • [U-Boot] [PATCH v3] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board   Stefano Babic
    • [U-Boot] [PATCH v3] imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board   Stefano Babic
  • [U-Boot] No boot file defined with u-boot from the xilinx repo   Manolis Ragkousis
  • [PATCH] config_distro_bootcmd: Run 'scsi scan' before trying scsi disks   Hans de Goede
    • [U-Boot] [PATCH] imx6: fix pl301_mx6qper1_bch clock gating setup   Anatolij Gustschin
    • [U-Boot] [PATCH] imx6: fix pl301_mx6qper1_bch clock gating setup   Nikita Kiryanov
    • [U-Boot] [PATCH] imx6: fix pl301_mx6qper1_bch clock gating setup   Anatolij Gustschin
    • [U-Boot] [PATCH v3 0/3] Add ISC SPDX, import Kconfiglib and improve genboardscfg.py   Masahiro Yamada
    • [U-Boot] [PATCH v3 2/3] tools: Import Kconfiglib   Masahiro Yamada
    • [U-Boot] [PATCH v3 1/3] SPDX: Add ISC SPDX-License-Identifier   Masahiro Yamada
    • [U-Boot] [PATCH v3 3/3] tools/genboardscfg.py: improve performance more with Kconfiglib   Masahiro Yamada
    • [U-Boot] [PATCH 0/4] ls102xa: HYP/non-sec: for ls102xa.   Xiubo Li
    • [U-Boot] [PATCH 1/4] ARM: HYP/non-sec: add the pen address byte reverting support.   Xiubo Li
    • [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.   Xiubo Li
    • [U-Boot] [PATCH 3/4] ls102xa: HYP/non-sec: support for ls102xa boards   Xiubo Li
    • [U-Boot] [PATCH 4/4] ARM: ls102xa: allow all the peripheral access permissions as R/W.   Xiubo Li
    • [U-Boot] [PATCH 0/4] ls102xa: HYP/non-sec: for ls102xa.   Li.Xiubo at freescale.com
    • [U-Boot] [PATCH 0/4] ls102xa: HYP/non-sec: for ls102xa.   Li.Xiubo at freescale.com
    • [U-Boot] [PATCH 0/3] Comment out invalid email addresses in MAINTAINERS   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] MAINTAINERS: comment out blank M: field   Masahiro Yamada
    • [U-Boot] [U-Boot,3/3] MAINTAINERS: comment out blank M: field   Tom Rini
    • [U-Boot] [PATCH 1/3] tools/genboardscfg.py: pick up also commented maitainers   Masahiro Yamada
    • [U-Boot] [U-Boot, 1/3] tools/genboardscfg.py: pick up also commented maitainers   Tom Rini
    • [U-Boot] [PATCH 2/3] MAINTAINERS: comment out invalid maintainers   Masahiro Yamada
    • [U-Boot] [PATCH 2/3] MAINTAINERS: comment out invalid maintainers   Simon Glass
    • [U-Boot] [U-Boot, 2/3] MAINTAINERS: comment out invalid maintainers   Tom Rini
• [U-Boot] Email address of SPEAr custodian is not working   Masahiro Yamada
  • [U-Boot] Email address of SPEAr custodian is not working   Viresh Kumar
    • [U-Boot] Email address of SPEAr custodian is not working   Masahiro Yamada
      • [U-Boot] [PATCH 0/1] config_distro_bootcmd: Run 'scsi scan' before trying scsi   Hans de Goede
      • [U-Boot] [PATCH] config_distro_bootcmd: Run 'scsi scan' before trying scsi disks   Hans de Goede
      • [U-Boot] [PATCH] config_distro_bootcmd: Run 'scsi scan' before trying scsi disks   Stephen Warren
      • [U-Boot] config_distro_bootcmd: Run 'scsi scan' before trying scsi disks   Tom Rini
      • [U-Boot] [PATCH v2 0/10] Move some CONFIGs to Kconfig   Masahiro Yamada
      • [U-Boot] [PATCH v2 01/10] kconfig: add blank Kconfig files   Masahiro Yamada
      • [U-Boot] [U-Boot,v2,01/10] kconfig: add blank Kconfig files   Tom Rini
      • [U-Boot] [PATCH v2 02/10] kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 02/10] kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig   Tom Rini
      • [U-Boot] [PATCH v2 03/10] kconfig: move CONFIG_CMD_BOOTM to Kconfig   Masahiro Yamada
      • [U-Boot] [PATCH v2 03/10] kconfig: move CONFIG_CMD_BOOTM to Kconfig   Simon Glass
      • [U-Boot] [U-Boot, v2, 03/10] kconfig: move CONFIG_CMD_BOOTM to Kconfig   Tom Rini
      • [U-Boot] [PATCH v2 04/10] kconfig: move CONFIG_CMD_CRC32 to Kconfig   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 04/10] kconfig: move CONFIG_CMD_CRC32 to Kconfig   Tom Rini
      • [U-Boot] [PATCH v2 05/10] kconfig: move CONFIG_CMD_EXPORTENV to Kconfig   Masahiro Yamada
      • [U-Boot] [PATCH v2 06/10] kconfig: move CONFIG_CMD_GO to Kconfig   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 06/10] kconfig: move CONFIG_CMD_GO to Kconfig   Tom Rini
      • [U-Boot] [PATCH v2 07/10] kconfig: move CONFIG_CMD_IMPORTENV to Kconfig   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 07/10] kconfig: move CONFIG_CMD_IMPORTENV to Kconfig   Tom Rini
      • [U-Boot] [PATCH v2 08/10] kconfig: remove config_cmd_defaults.h   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 08/10] kconfig: remove config_cmd_defaults.h   Tom Rini
      • [U-Boot] [PATCH v2 09/10] kconfig: move CONFIG_OF_* to Kconfig   Masahiro Yamada
      • [U-Boot] [PATCH v2 09/10] kconfig: move CONFIG_OF_* to Kconfig   Michal Simek
      • [U-Boot] [PATCH v2 10/10] kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig   Masahiro Yamada
• [U-Boot] Generic bootcmd handling: Missing 'scsi scan'   Hans de Goede
  • [U-Boot] [PATCH 0/3] ARM: atmel: add sama5d4ek board support   Bo Shen
  • [U-Boot] [PATCH 1/3] atmel_nand: if don't have gf table in rom code we will build it runtime   Bo Shen
  • [U-Boot] [PATCH 2/3] net: macb: enable GMAC IP without GE feature support   Bo Shen
  • [U-Boot] [PATCH 3/3] ARM: atmel: add sama5d4ek board support   Bo Shen
  • [U-Boot] [PATCH 0/3] ARM: atmel: add sama5d4ek board support   Nicolas Ferre
• [U-Boot] Congatec Conga-QEVAL board sd-card boot not working   Hänel-Baas, Alexander
  • [U-Boot] Congatec Conga-QEVAL board sd-card boot not working   Tobias Andresen
• [U-Boot] [PATCH 3/3] arm: mx35: use common timer functions   Stefano Babic
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Stefano Babic
  • [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
    • [U-Boot] [PATCH] linker_lists: fix comment   Masahiro Yamada
    • [U-Boot] [PATCH] linker_lists: fix comment   Marek Vasut
    • [U-Boot] linker_lists: fix comment   Tom Rini
• [U-Boot] AM335x not working anymore   Hannes Petermaier
  • [U-Boot] AM335x not working anymore   Tom Rini
    • [U-Boot] AM335x not working anymore   Jeroen Hofstee
      • [U-Boot] AM335x not working anymore   Jeroen Hofstee
      • [U-Boot] [PATCH] cmd_nand: Update (nand_info_t*)nand after arg_off(_size) call   Rostislav Lisovy
      • [U-Boot] cmd_nand: Update (nand_info_t*)nand after arg_off(_size) call   Tom Rini
      • [U-Boot] [PATCH] imx: Fix warning by building vf610twr_nand   Stefano Babic
      • [U-Boot] [PATCH] imx: Fix warning by building vf610twr_nand   Stefan Agner
      • [U-Boot] [PATCH 1/2] mx25pdk: Fix CONFIG_SYS_FSL_ESDHC_ADDR   Fabio Estevam
      • [U-Boot] [PATCH 2/2] mx25pdk: Add generic board support   Fabio Estevam
      • [U-Boot] [PATCH 2/2] mx25pdk: Add generic board support   Stefano Babic
      • [U-Boot] [PATCH 1/2] mx25pdk: Fix CONFIG_SYS_FSL_ESDHC_ADDR   Stefano Babic
• [U-Boot] [U-Boot,1/3] arm: pxa: use common timer functions   Andrew Ruder
  • [U-Boot] [PATCH 0/5] omap3: overo: Add foreign expansion board support   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH 0/5] omap3: overo: Add foreign expansion board support   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH 1/5] omap3: overo: Fix fdtfile test   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH 2/5] omap3: overo: Call bootm only after successful nand read   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH 3/5] omap3: overo: Move ethernet setup to board_eth_init function   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH 4/5] omap3: overo: Separate module and expansion board MUX configuration   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH 5/5] omap3: overo: Add usb host support   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH v4 0/5] add i.MX6 thermal sensor driver   Nitin Garg
  • [U-Boot] [PATCH v4 4/5] mx6: thermal: Check cpu temperature via thermal sensor   Nitin Garg
  • [U-Boot] [PATCH v4 5/5] mx6: thermal: Enable thermal sensor for mx6 sabre boards.   Nitin Garg
  • [U-Boot] [PATCH v4 1/5] mx6: crm_regs: Add bit definitions for anadig registers   Nitin Garg
  • [U-Boot] [PATCH v4 2/5] mx6: clock: Add api to enable pll3   Nitin Garg
  • [U-Boot] [PATCH v4 3/5] mx6: thermal: Add i.MX6 CPU thermal sensor support   Nitin Garg
  • [U-Boot] Reading a text file from another FAT partition   harsha kiran
    • [U-Boot] Reading a text file from another FAT partition   Wolfgang Denk
      • [U-Boot] Reading a text file from another FAT partition   harsha kiran
      • [U-Boot] Reading a text file from another FAT partition   Wolfgang Denk
      • [U-Boot] [PATCH v4] imx: Support i.MX6 High Assurance Boot authentication   Nitin Garg
      • [U-Boot] [PATCH v4] imx: Support i.MX6 High Assurance Boot authentication   Stefano Babic
      • [U-Boot] [PATCH v4] imx: Support i.MX6 High Assurance Boot authentication   Nitin Garg
      • [U-Boot] [PATCH v4] imx: Support i.MX6 High Assurance Boot authentication   Stefano Babic
      • [U-Boot] [PATCH v4] imx: Support i.MX6 High Assurance Boot authentication   Fabio Estevam
      • [U-Boot] [PATCH v4] imx: Support i.MX6 High Assurance Boot authentication   Nitin Garg
      • [U-Boot] [PATCH 1/2] mx51evk: Fix CONFIG_SYS_FSL_ESDHC_ADDR   Fabio Estevam
      • [U-Boot] [PATCH 1/2] mx51evk: Fix CONFIG_SYS_FSL_ESDHC_ADDR   Stefano Babic
      • [U-Boot] [PATCH 2/2] mx51evk: Add generic board support   Fabio Estevam
      • [U-Boot] [PATCH 2/2] mx51evk: Add generic board support   Stefano Babic
      • [U-Boot] [PATCH] Revert "ARM: SPL: do not set gd again"   Tom Rini
      • [U-Boot] [PATCH] Revert "ARM: SPL: do not set gd again"   Tom Rini
    • [U-Boot] cosmetic: README.scrapyard: add NIOS2 boards   Tom Rini
    • [U-Boot] Fix a few printf argument verification warnings   Tom Rini
    • [U-Boot] openrisc: Fix a few type cast related warnings   Tom Rini
    • [U-Boot] [U-Boot, v2, 01/40] vsprintf: Add modifier for phys_addr_t   Tom Rini
    • [U-Boot] kbuild: force to define __UBOOT__ in all the C sources   Tom Rini
      • [U-Boot] [PATCH v2 0/11] dm: imx: Add driver model support for GPIO and serial on cm_fx6   Simon Glass
      • [U-Boot] [PATCH v2 01/11] dm: linker_lists: Add a way to declare multiple objects   Simon Glass
      • [U-Boot] [PATCH v2 02/11] dm: core: Allow a list of devices to be declared in one step   Simon Glass
      • [U-Boot] [PATCH v2 03/11] dm: core: Allow device_bind() to used without CONFIG_OF_CONTROL   Simon Glass
      • [U-Boot] [PATCH v2 04/11] initcall: Display error number when an error occurs   Simon Glass
      • [U-Boot] [PATCH v2 04/11] initcall: Display error number when an error occurs   Igor Grinberg
      • [U-Boot] [PATCH v2 05/11] dm: serial: Don't require device tree to configure a console   Simon Glass
      • [U-Boot] [PATCH v2 06/11] dm: serial: Put common code into separate functions   Simon Glass
      • [U-Boot] [PATCH v2 07/11] dm: imx: Add error checking to setup_i2c()   Simon Glass
      • [U-Boot] [PATCH v2 07/11] dm: imx: Add error checking to setup_i2c()   Igor Grinberg
      • [U-Boot] [PATCH v2 07/11] dm: imx: Add error checking to setup_i2c()   Simon Glass
      • [U-Boot] [PATCH v2 07/11] dm: imx: Add error checking to setup_i2c()   Igor Grinberg
      • [U-Boot] [PATCH v2 08/11] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
      • [U-Boot] [PATCH v2 08/11] dm: imx: Use gpio_request() to request GPIOs   Igor Grinberg
      • [U-Boot] [PATCH v2 08/11] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
      • [U-Boot] [PATCH v2 08/11] dm: imx: Use gpio_request() to request GPIOs   Igor Grinberg
      • [U-Boot] [PATCH v2 08/11] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
      • [U-Boot] [PATCH v2 08/11] dm: imx: Use gpio_request() to request GPIOs   Igor Grinberg
      • [U-Boot] [PATCH v2 09/11] dm: imx: gpio: Support driver model in MXC gpio driver   Simon Glass
      • [U-Boot] [PATCH v2 09/11] dm: imx: gpio: Support driver model in MXC gpio driver   Igor Grinberg
      • [U-Boot] [PATCH v2 09/11] dm: imx: gpio: Support driver model in MXC gpio driver   Simon Glass
      • [U-Boot] [PATCH v2 09/11] dm: imx: gpio: Support driver model in MXC gpio driver   Igor Grinberg
      • [U-Boot] [PATCH v2 10/11] dm: imx: serial: Support driver model in the MXC serial driver   Simon Glass
      • [U-Boot] [PATCH v2 11/11] dm: imx: Move cm_fx6 to use driver model for serial and GPIO   Simon Glass
      • [U-Boot] [PATCH v2 11/11] dm: imx: Move cm_fx6 to use driver model for serial and GPIO   Igor Grinberg
      • [U-Boot] [PATCH] kconfiglib: change SPDX-License-Identifier to ISC   Masahiro Yamada
      • [U-Boot] [PATCH] kconfiglib: change SPDX-License-Identifier to ISC   Tom Rini
      • [U-Boot] [PATCH] powerpc/t104xrdb: Disable DTSEC1 and DTSEC2 on T1042RDB   Vijay Rai
      • [U-Boot] [PATCH] powerpc/t104xrdb: Disable DTSEC1 and DTSEC2 on T1042RDB   York Sun
      • [U-Boot] [PATCH] usb: gadget: fastboot: improve download progress bar   Bo Shen
      • [U-Boot] [PATCH] usb: gadget: fastboot: improve download progress bar   Marek Vasut
      • [U-Boot] [PATCH] usb: gadget: fastboot: improve download progress bar   Bo Shen
      • [U-Boot] [PATCH] usb: gadget: fastboot: improve download progress bar   Marek Vasut
      • [U-Boot] [PATCH] usb: gadget: fastboot: improve download progress bar   Bo Shen
      • [U-Boot] [PATCH] usb: gadget: fastboot: improve download progress bar   Marek Vasut
      • [U-Boot] [PATCH 0/3] Fixes and updates for goni platform   Robert Baldyga
      • [U-Boot] [PATCH 1/3] arm: goni: make board generic   Robert Baldyga
      • [U-Boot] [PATCH 1/3] arm: goni: make board generic   Simon Glass
      • [U-Boot] [PATCH 2/3] arm: goni: update SDRAM memory layout   Robert Baldyga
      • [U-Boot] [PATCH 3/3] arm: goni: update environmental variables   Robert Baldyga
• [U-Boot] [PATCH] imx: Fix warning by building vf610twr_nand   Stefano Babic
  • [U-Boot] [PATCH] powerpc/t104xrdb: Enable SPI flash Extend address support   Hou Zhiqiang
  • [U-Boot] [PATCH] powerpc/t104xrdb: Enable SPI flash Extend address support   Jagan Teki
  • [U-Boot] Gigabit support in UBOOT   sreejugr
    • [U-Boot] [PATCH] t104xrdb: Add Errata A_007662, A_008007 workaround in pbi.cfg   Priyanka Jain
    • [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot   Ruchika Gupta
    • [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot   York Sun
    • [U-Boot] [PATCH 0/2] Abolish MIN, MAX, MIN3, MAX   Masahiro Yamada
    • [U-Boot] [PATCH 1/2] cosmetic: replace MIN, MAX with min, max   Masahiro Yamada
    • [U-Boot] [PATCH 2/2] common.h: remove MIN, MAX, MIN3, MAX3 macros   Masahiro Yamada
    • [U-Boot] [PATCH] compulab: eeprom: add default eeprom bus   Nikita Kiryanov
    • [U-Boot] [PATCH] compulab: eeprom: add default eeprom bus   Igor Grinberg
    • [U-Boot] [PATCH] compulab: eeprom: add default eeprom bus   Albert ARIBAUD
    • [U-Boot] [PATCH] compulab: eeprom: add default eeprom bus   Nikita Kiryanov
    • [U-Boot] [PATCH] compulab: eeprom: add default eeprom bus   Albert ARIBAUD
    • [U-Boot] [PATCH v3 0/11] dm: imx: Add driver model support for GPIO and serial on cm_fx6   Simon Glass
    • [U-Boot] [PATCH v3 01/11] dm: linker_lists: Add a way to declare multiple objects   Simon Glass
    • [U-Boot] [PATCH v3 02/11] dm: core: Allow a list of devices to be declared in one step   Simon Glass
    • [U-Boot] [PATCH v3 03/11] dm: core: Allow device_bind() to used without CONFIG_OF_CONTROL   Simon Glass
    • [U-Boot] [PATCH v3 03/11] dm: core: Allow device_bind() to used without CONFIG_OF_CONTROL   Simon Glass
    • [U-Boot] [PATCH v3 04/11] initcall: Display error number when an error occurs   Simon Glass
    • [U-Boot] [PATCH v3 05/11] dm: serial: Don't require device tree to configure a console   Simon Glass
    • [U-Boot] [PATCH v3 05/11] dm: serial: Don't require device tree to configure a console   Simon Glass
    • [U-Boot] [PATCH v3 06/11] dm: serial: Put common code into separate functions   Simon Glass
    • [U-Boot] [PATCH v3 07/11] imx: Add error checking to setup_i2c()   Simon Glass
    • [U-Boot] [PATCH v3 07/11] imx: Add error checking to setup_i2c()   Igor Grinberg
    • [U-Boot] [PATCH v3 08/11] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
    • [U-Boot] [PATCH v3 08/11] dm: imx: Use gpio_request() to request GPIOs   Igor Grinberg
    • [U-Boot] [PATCH v3 09/11] dm: imx: gpio: Support driver model in MXC gpio driver   Simon Glass
    • [U-Boot] [PATCH v3 09/11] dm: imx: gpio: Support driver model in MXC gpio driver   Igor Grinberg
    • [U-Boot] [PATCH v3 09/11] dm: imx: gpio: Support driver model in MXC gpio driver   Simon Glass
    • [U-Boot] [PATCH v3 10/11] dm: imx: serial: Support driver model in the MXC serial driver   Simon Glass
    • [U-Boot] [PATCH v3 11/11] dm: imx: Move cm_fx6 to use driver model for serial and GPIO   Simon Glass
  • [U-Boot] Running updated U-boot.img/u-boot.bin from already loaded u-boot shell   harsha kiran
    • [U-Boot] Running updated U-boot.img/u-boot.bin from already loaded u-boot shell   Wolfgang Denk
• [U-Boot] Cannot boot fitImage on RPi   Jens Lucius
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Stephen Warren
  • [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Tom Warren
    • [U-Boot] [PATCH 0/3] Fixes for FreeBSD / clang   Jeroen Hofstee
    • [U-Boot] [PATCH 1/3] compiler_gcc: do not redefine __gnu_attributes   Jeroen Hofstee
    • [U-Boot] [PATCH 1/3] compiler_gcc: do not redefine __gnu_attributes   Masahiro Yamada
    • [U-Boot] [PATCH 1/3] compiler_gcc: do not redefine __gnu_attributes   Jeroen Hofstee
    • [U-Boot] [PATCH 1/3] compiler_gcc: do not redefine __gnu_attributes   Masahiro Yamada
    • [U-Boot] [PATCH 2/3] README.clang: update FreeBSD instructions   Jeroen Hofstee
    • [U-Boot] [PATCH 3/3] compiler.h: remove duplicated uninitialized_var   Jeroen Hofstee
    • [U-Boot] [PATCH 3/3] compiler.h: remove duplicated uninitialized_var   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] compiler.h: remove duplicated uninitialized_var   Jeroen Hofstee
    • [U-Boot] [PATCH 3/3] compiler.h: remove duplicated uninitialized_var   Tom Rini
    • [U-Boot] [U-Boot, 3/3] compiler.h: remove duplicated uninitialized_var   Tom Rini
    • [U-Boot] [PATCH v2 1/3] compiler_gcc: prevent redefining attributes   Jeroen Hofstee
    • [U-Boot] [PATCH v2 1/3] compiler_gcc: prevent redefining attributes   Masahiro Yamada
    • [U-Boot] [U-Boot, v2, 1/3] compiler_gcc: prevent redefining attributes   Tom Rini
    • [U-Boot] [PATCH v2 2/3] README.clang: update FreeBSD instructions   Jeroen Hofstee
    • [U-Boot] [U-Boot, v2, 2/3] README.clang: update FreeBSD instructions   Tom Rini
• [U-Boot] Need help with u-boot problem with usb-keyboard / kvm switch   Hans de Goede
  • [U-Boot] Need help with u-boot problem with usb-keyboard / kvm switch   Luc Verhaegen
    • [U-Boot] Need help with u-boot problem with usb-keyboard / kvm switch   Marek Vasut
    • [U-Boot] Need help with u-boot problem with usb-keyboard / kvm switch   Hans de Goede
      • [U-Boot] Need help with u-boot problem with usb-keyboard / kvm switch   Luc Verhaegen
  • [U-Boot] Need help with u-boot problem with usb-keyboard / kvm switch   Eric Nelson
    • [U-Boot] Need help with u-boot problem with usb-keyboard / kvm switch   Marek Vasut
    • [U-Boot] Need help with u-boot problem with usb-keyboard / kvm switch   Bo Shen
    • [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
      • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
      • [U-Boot] [PATCH v2 0/2] Abolish MIN, MAX, MIN3, MAX   Masahiro Yamada
      • [U-Boot] [PATCH v2 2/2] common.h: remove MIN, MAX, MIN3, MAX3 macros   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 2/2] common.h: remove MIN, MAX, MIN3, MAX3 macros   Tom Rini
      • [U-Boot] [PATCH v2 1/2] cosmetic: replace MIN, MAX with min, max   Masahiro Yamada
      • [U-Boot] [U-Boot, v2, 1/2] cosmetic: replace MIN, MAX with min, max   Tom Rini
• [U-Boot] [PATCH v2 2/2] doc: Use KBUILD_OUTPUT instead of BUILD_DIR   Masahiro Yamada
  • [U-Boot] [PATCH 0/7] Add SD boot support for LS1021AQDS/TWR board   Alison Wang
  • [U-Boot] [PATCH 2/7] ls102xa: pblimage: Add pblimage tool support for LS102xA   Alison Wang
  • [U-Boot] [PATCH 2/7] ls102xa: pblimage: Add pblimage tool support for LS102xA   Albert ARIBAUD
  • [U-Boot] [PATCH 2/7] ls102xa: pblimage: Add pblimage tool support for LS102xA   Huan Wang
  • [U-Boot] [OT] Re: [PATCH 2/7] ls102xa: pblimage: Add pblimage tool support for LS102xA   Albert ARIBAUD
  • [U-Boot] [OT] Re: [PATCH 2/7] ls102xa: pblimage: Add pblimage tool support for LS102xA   Huan Wang
  • [U-Boot] [PATCH 3/7] spl: Use u-boot.img instead of u-boot.bin when CONFIG_SPL_PBL_PAD is enabled   Alison Wang
  • [U-Boot] [PATCH 4/7] ls102xa: qixis: Add CONFIG_QIXIS_I2C_ACCESS macro   Alison Wang
  • [U-Boot] [PATCH 5/7] common: spl: Add interactive DDR debugger support for SPL   Alison Wang
  • [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Alison Wang
  • [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Albert ARIBAUD
  • [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Alison Wang
  • [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Huan Wang
  • [U-Boot] [PATCH 7/7] arm: ls102xa: Add SD boot support for LS1021ATWR board   Alison Wang
  • [U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool   Alison Wang
  • [U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool   Albert ARIBAUD
  • [U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool   Huan Wang
  • [U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool   Albert ARIBAUD
  • [U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool   Huan Wang
  • [U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool   York Sun
  • [U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool   Huan Wang
  • [U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool   York Sun
  • [U-Boot] [PATCH 1/7] spl: pbl: Add new SPL image for pblimage tool   Huan Wang
  • [U-Boot] [PATCH] kbuild: refactor some makefiles   Masahiro Yamada
  • [U-Boot] [PATCH] kbuild: refactor some makefiles   Marek Vasut
  • [U-Boot] kbuild: refactor some makefiles   Tom Rini
• [U-Boot] FW: [PATCH] usb: gadget: fastboot: improve download progress bar   Bo Shen
  • [U-Boot] FW: [PATCH] usb: gadget: fastboot: improve download progress bar   Marek Vasut
    • [U-Boot] FW: [PATCH] usb: gadget: fastboot: improve download progress bar   Bo Shen
      • [U-Boot] FW: [PATCH] usb: gadget: fastboot: improve download progress bar   Marek Vasut
      • [U-Boot] [PATCH] arm: ls102xa: Fixed a register definition error   Tang Yuantian
      • [U-Boot] [PATCH] arm: ls102xa: Fixed a register definition error   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: ls102xa: Fixed a register definition error   Yuantian Tang
      • [U-Boot] [PATCH] arm: ls102xa: Fixed a register definition error   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: ls102xa: Fixed a register definition error   Yuantian Tang
      • [U-Boot] [PATCH] arm: ls102xa: Fixed a register definition error   Huan Wang
    • [U-Boot] [PATCH 4/8] ARMv8: PSCI: Add linker section to hold PSCI code   Albert ARIBAUD
      • [U-Boot] [PATCH 4/8] ARMv8: PSCI: Add linker section to hold PSCI code   Marc Zyngier
      • [U-Boot] [PATCH 4/8] ARMv8: PSCI: Add linker section to hold PSCI code   Albert ARIBAUD
      • [U-Boot] [PATCH] ARM: HYP/non-sec: Make a variable as a local one   Tang Yuantian
      • [U-Boot] [PATCH] ARM: HYP/non-sec: Make a variable as a local one   Albert ARIBAUD
      • [U-Boot] [PATCH] ARM: HYP/non-sec: Make a variable as a local one   Yuantian Tang
    • [U-Boot] [PATCH 8/8] ARMv8: PSCI: Enable SMC   Albert ARIBAUD
      • [U-Boot] [PATCH 8/8] ARMv8: PSCI: Enable SMC   arnab.basu at freescale.com
    • [U-Boot] Please pull u-boot-ti/master   Tom Rini
      • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
      • [U-Boot] [PATCH] dm: avoid dev->req_seq overflow   Robert Baldyga
      • [U-Boot] [PATCH] dm: avoid dev->req_seq overflow   Simon Glass
      • [U-Boot] [PATCH] dm: avoid dev->req_seq overflow   Robert Baldyga
      • [U-Boot] [PATCH] dm: avoid dev->req_seq overflow   Simon Glass
• [U-Boot] [linux-sunxi] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Siarhei Siamashka
  • [U-Boot] [linux-sunxi] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Hans de Goede
    • [U-Boot] [linux-sunxi] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Arnd Gronenberg
    • [U-Boot] [linux-sunxi] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Siarhei Siamashka
      • [U-Boot] [linux-sunxi] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Siarhei Siamashka
• [U-Boot] compulab trimslice build error due to 52658fda7abc ("compulab: eeprom: add support for defining eeprom i2c bus")   Stephen Warren
  • [U-Boot] compulab trimslice build error due to 52658fda7abc ("compulab: eeprom: add support for defining eeprom i2c bus")   Igor Grinberg
    • [U-Boot] [PATCH 0/2] sama5d3xek: get GMAC working   Andreas Bießmann
    • [U-Boot] [PATCH 1/2] macb: simplify gmac initialisation   Andreas Bießmann
    • [U-Boot] [PATCH 2/2] sama5d3xek: run PHY's config   Andreas Bießmann
    • [U-Boot] [PATCH 0/2] sama5d3xek: get GMAC working   Bo Shen
    • [U-Boot] [PATCH v2] ARM: HYP/non-sec: Make variable gic_dist_addr as a local one   Tang Yuantian
    • [U-Boot] [PATCH v4 1/3] spi:rewrite the Freescale DSPI driver.   Chao Fu
    • [U-Boot] [PATCH v4 2/3] arm:vf610:Enable the DSPI for Freescale vf610 platform   Chao Fu
    • [U-Boot] [PATCH v4 3/3] arm:vf610:vf610-twr:Enable the DSPI for Freesacale vf610-twr board   Chao Fu
    • [U-Boot] [PATCH v4 1/3] spi:rewrite the Freescale DSPI driver.   Simon Glass
    • [U-Boot] [PATCH v2] usb: gadget: fastboot: improve download progress bar   Bo Shen
    • [U-Boot] [PATCH v2] usb: gadget: fastboot: improve download progress bar   Marek Vasut
    • [U-Boot] [PATCH v2] usb: gadget: fastboot: improve download progress bar   Lukasz Majewski
    • [U-Boot] mtd: atmel-nand: use pmecc_readl(b)/pmecc_writel to access the pmecc register   Andreas Bießmann
    • [U-Boot] [U-Boot,v2,1/2] ARM: atmel: sama5d3xek: add nor flash init function   Andreas Bießmann
    • [U-Boot] [U-Boot,v2,2/2] ARM: atmel: sama5d3xek: enable NOR flash support   Andreas Bießmann
    • [U-Boot] ARM: atmel: sama5d3: add timings register   Andreas Bießmann
    • [U-Boot] [U-Boot, 1/4] ARM: atmel: use pcr to enable or disable peripheral clock   Andreas Bießmann
    • [U-Boot] [U-Boot,2/4] ARM: atmel: add pcr related definition   Andreas Bießmann
    • [U-Boot] [U-Boot,3/4] USB: ohci-at91: use pcr to enable or disable clock   Andreas Bießmann
    • [U-Boot] [U-Boot,4/4] USB: ehci-atmel: use pcr to enable or disable clock   Andreas Bießmann
    • [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Andreas Bießmann
    • [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL   Guillaume GARDET
    • [U-Boot] [PATCH 1/5] Rename some defines containing FAT in their name to be filesystem generic MMCSD_MODE_FAT => MMCSD_MODE_FS CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION   Guillaume GARDET
    • [U-Boot] [PATCH 2/5] spl: Add EXT support to SPL   Guillaume GARDET
    • [U-Boot] [PATCH 3/5] doc: Update documentation according to the EXT SPL support patch set   Guillaume GARDET
    • [U-Boot] [PATCH 4/5] spl: do not hang in spl_register_fat_device but return error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT.   Guillaume GARDET
    • [U-Boot] [PATCH 5/5] TI:OMAP4: enable EXT support in SPL for OMAP4 boards   Guillaume GARDET
    • [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL   Guillaume Gardet
    • [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL   Tom Rini
    • [U-Boot] [PATCH 0/5] Add EXT filesystem support to SPL   Guillaume Gardet
    • [U-Boot] [PATCH] socfpga: Enable DWMMC for SOCFPGA   Chin Liang See
    • [U-Boot] [PATCH] socfpga: Enable DWMMC for SOCFPGA   Marek Vasut
    • [U-Boot] [PATCH] armv7: s5pc1xx: improve cache handling   Robert Baldyga
    • [U-Boot] [PATCH] socfpga: Enable SDMMC boot for SOCFPGA U-Boot   Chin Liang See
    • [U-Boot] [PATCH] socfpga: Enable SDMMC boot for SOCFPGA U-Boot   Marek Vasut
• [U-Boot] Many questions about U-Boot's Driver Model   Masahiro Yamada
  • [U-Boot] Many questions about U-Boot's Driver Model   Simon Glass
    • [U-Boot] Many questions about U-Boot's Driver Model   Masahiro YAMADA
      • [U-Boot] Many questions about U-Boot's Driver Model   Simon Glass
      • [U-Boot] [PATCH] ARNDALE: Enhance arndale config to be more flexible on boot.   Guillaume GARDET
      • [U-Boot] [PATCH] ARNDALE: Enhance arndale config to be more flexible on boot.   Guillaume Gardet
      • [U-Boot] [PATCH] ARNDALE: Enhance arndale config to be more flexible on boot.   Ian Campbell
      • [U-Boot] [PATCH] ARNDALE: Enhance arndale config to be more flexible on boot.   Guillaume Gardet
      • [U-Boot] [PATCH] ORIGEN: Enhance origen config to be more flexible on boot.   Guillaume GARDET
      • [U-Boot] [PATCH] ORIGEN: Enhance origen config to be more flexible on boot.   Guillaume GARDET
      • [U-Boot] [PATCH] ORIGEN: Enhance origen config to be more flexible on boot.   Guillaume Gardet
  • [U-Boot] After relocate the printf not working   nohabviktor
    • [U-Boot] After relocate the printf not working   Jeroen Hofstee
    • [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Albert ARIBAUD
      • [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Huan Wang
      • [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Albert ARIBAUD
      • [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Huan Wang
• [U-Boot] [U-Boot, 2/3] image: move all function comments to header file   Simon Glass
  • [U-Boot] [U-Boot, 2/3] image: move all function comments to header file   Masahiro YAMADA
    • [U-Boot] [U-Boot, 2/3] image: move all function comments to header file   Albert ARIBAUD
    • [U-Boot] [U-Boot, 2/3] image: move all function comments to header file   Simon Glass
      • [U-Boot] [PATCH] usb: f_mass_storage: set removable flag in do_inquiry based on LUN   Eric Nelson
      • [U-Boot] [PATCH] usb: f_mass_storage: set removable flag in do_inquiry based on LUN   Marek Vasut
      • [U-Boot] [PATCH] usb: f_mass_storage: set removable flag in do_inquiry based on LUN   Lukasz Majewski
      • [U-Boot] [PATCH] usb: f_mass_storage: set removable flag in do_inquiry based on LUN   Lukasz Majewski
      • [U-Boot] [PATCH] usb: f_mass_storage: set removable flag in do_inquiry based on LUN   Eric Nelson
      • [U-Boot] [PATCH fix for v2014.10 0/5] USB bug-fixes for v2014.10   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 1/5] usb: ehci: Properly set hub devnum and portnr with usb-1 hubs in the chain   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 1/5] usb: ehci: Properly set hub devnum and portnr with usb-1 hubs in the chain   Marek Vasut
      • [U-Boot] [PATCH fix for v2014.10 2/5] usb: ehci: Add missing cache flush to destroy_int_queue   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 2/5] usb: ehci: Add missing cache flush to destroy_int_queue   Michael Trimarchi
      • [U-Boot] [PATCH fix for v2014.10 3/5] usb: ehci: poll_int_queue check real qtd, not the overlay   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 4/5] usb: ehci: Make periodic_schedules a per controller variable   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 5/5] usb: kbd: Fix unaligned buffer usage in usb_kbd_setled()   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 0/5] USB keyboard: don't crash on "usb reset"   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 2/5] usb: kbd: On a "usb reset" call usb_kbd_deregister() before calling usb_stop()   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 2/5] usb: kbd: On a "usb reset" call usb_kbd_deregister() before calling usb_stop()   Marek Vasut
      • [U-Boot] [PATCH fix for v2014.10 2/5] usb: kbd: On a "usb reset" call usb_kbd_deregister() before calling usb_stop()   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 2/5] usb: kbd: On a "usb reset" call usb_kbd_deregister() before calling usb_stop()   Marek Vasut
      • [U-Boot] [PATCH fix for v2014.10 2/5] usb: kbd: On a "usb reset" call usb_kbd_deregister() before calling usb_stop()   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 3/5] usb: kbd: Remove check for already being registered   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 5/5] usb: kbd: Allow "usb reset" to continue when an usb kbd is used   Hans de Goede
      • [U-Boot] [PATCH fix for v2014.10 0/5] USB keyboard: don't crash on "usb reset"   Marek Vasut
      • [U-Boot] [PATCH fix for v2014.10 1/5] usb: kbd: Do not treat -ENODEV as an error for usb_kbd_deregister   Hans de Goede
      • [U-Boot] [PATCH 0/7] Add a better USB keyboard polling method   Hans de Goede
      • [U-Boot] [PATCH 1/7] usb: ehci: Do not disable an already disabled periodic schedule   Hans de Goede
      • [U-Boot] [PATCH 2/7] usb: ehci: Move interrupt packet length check to create_int_queue   Hans de Goede
      • [U-Boot] [PATCH 2/7] usb: ehci: Move interrupt packet length check to create_int_queue   Michael Trimarchi
      • [U-Boot] [PATCH 2/7] usb: ehci: Move interrupt packet length check to create_int_queue   Hans de Goede
      • [U-Boot] [PATCH 2/7] usb: ehci: Move interrupt packet length check to create_int_queue   Marek Vasut
      • [U-Boot] [PATCH 2/7] usb: ehci: Move interrupt packet length check to create_int_queue   Michael Trimarchi
      • [U-Boot] [PATCH 2/7] usb: ehci: Move interrupt packet length check to create_int_queue   Marek Vasut
      • [U-Boot] [PATCH 3/7] usb: ehci: Move cache invalidation to poll_int_queue   Hans de Goede
      • [U-Boot] [PATCH 4/7] usb: Make pollable int support available outside of ehci-hcd.c   Hans de Goede
      • [U-Boot] [PATCH 5/7] usb: kbd: Remove unused usb_kbd_generic_poll function   Hans de Goede
      • [U-Boot] [PATCH 6/7] usb: kbd: Cache pipe, interval and packetsize   Hans de Goede
      • [U-Boot] [PATCH 6/7] usb: kbd: Cache pipe, interval and packetsize   Michael Trimarchi
      • [U-Boot] [PATCH 6/7] usb: kbd: Cache pipe, interval and packetsize   Hans de Goede
      • [U-Boot] [PATCH 7/7] usb: kbd: Add (optional) support for using an interrupt queue for polling   Hans de Goede
      • [U-Boot] [PATCH 7/7] usb: kbd: Add (optional) support for using an interrupt queue for polling   Hans de Goede
      • [U-Boot] [PATCH 0/7] Add a better USB keyboard polling method   Marek Vasut
      • [U-Boot] [PATCH 0/2] Misc. USB fixes   Hans de Goede
      • [U-Boot] [PATCH 1/2] usb: Remove unnecessary portnr lookup from usb_new_device   Hans de Goede
      • [U-Boot] [PATCH 2/2] usb: Do not power-cycle usb devices on init   Hans de Goede
      • [U-Boot] [PATCH 0/2] Misc. USB fixes   Marek Vasut
• [U-Boot] [PATCH 2/2] config_distro_defaults.h: add CONFIG_API   Jeroen Hofstee
  • [U-Boot] [PATCH] cm_fx6: Remove CONFIG_NETMASK   Fabio Estevam
  • [U-Boot] [PATCH] cm_fx6: Remove CONFIG_NETMASK   Igor Grinberg
  • [U-Boot] [PATCH] cm_fx6: Remove CONFIG_NETMASK   Nikita Kiryanov
  • [U-Boot] [PATCH] cm_fx6: Remove CONFIG_NETMASK   Stefano Babic
  • [U-Boot] [PATCH 00/51] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH 02/51] net: phy: Cleanup drivers/net/phy/micrel.c   Marek Vasut
  • [U-Boot] [PATCH 04/51] net: dwc: Make the cache handling less cryptic   Marek Vasut
  • [U-Boot] [PATCH 05/51] mmc: dw_mmc: cleanups   Marek Vasut
  • [U-Boot] [PATCH 06/51] mmc: dw_mmc: Fix cache alignment issue   Marek Vasut
  • [U-Boot] [PATCH 07/51] tools: socfpga: Add socfpga preloader signing to mkimage   Marek Vasut
  • [U-Boot] [PATCH 09/51] arm: socfpga: Clean up base address file   Marek Vasut
  • [U-Boot] [PATCH V2 10/51] arm: socfpga: Add watchdog disable for socfpga   Marek Vasut
  • [U-Boot] [PATCH 11/51] arm: socfpga: sysmgr: Clean up system manager   Marek Vasut
  • [U-Boot] [PATCH 12/51] arm: socfpga: clock: Implant order into bit definitions   Marek Vasut
  • [U-Boot] [PATCH 13/51] arm: socfpga: clock: Drop nonsense inlining from clock manager code   Marek Vasut
  • [U-Boot] [PATCH 14/51] arm: socfpga: clock: Add missing stubs into board file   Marek Vasut
  • [U-Boot] [PATCH V2 15/51] arm: socfpga: clock: Add code to read clock configuration   Marek Vasut
  • [U-Boot] [PATCH 16/51] arm: socfpga: clock: Trim down code duplication   Marek Vasut
  • [U-Boot] [PATCH 17/51] arm: socfpga: clock: Clean up bit definitions   Marek Vasut
  • [U-Boot] [PATCH 18/51] arm: socfpga: clock: Sync with reference code   Marek Vasut
  • [U-Boot] [PATCH 19/51] arm: socfpga: mmc: Pick the clock from clock manager   Marek Vasut
  • [U-Boot] [PATCH 20/51] arm: socfpga: timer: Pull the timer reload value from config file   Marek Vasut
  • [U-Boot] [PATCH 21/51] arm: socfpga: reset: Add EMAC reset functions   Marek Vasut
  • [U-Boot] [PATCH 22/51] arm: socfpga: misc: Add proper ethernet initialization   Marek Vasut
  • [U-Boot] [PATCH 23/51] arm: socfpga: misc: Add SD controller init   Marek Vasut
  • [U-Boot] [PATCH 24/51] arm: socfpga: misc: Align print_cpuinfo() output   Marek Vasut
  • [U-Boot] [PATCH 25/51] arm: socfpga: board: Correctly set ATAG position   Marek Vasut
  • [U-Boot] [PATCH 26/51] arm: socfpga: board: Align checkboard() output   Marek Vasut
  • [U-Boot] [PATCH 27/51] fpga: altera: Clean up the printing and debug   Marek Vasut
  • [U-Boot] [PATCH 27/51] fpga: altera: Clean up the printing and debug   Michal Simek
  • [U-Boot] [PATCH 27/51] fpga: altera: Clean up the printing and debug   Marek Vasut
  • [U-Boot] [PATCH 28/51] fpga: altera: Clean up altera_validate function   Marek Vasut
  • [U-Boot] [PATCH 29/51] fpga: altera: More indentation trimdown   Marek Vasut
  • [U-Boot] [PATCH 30/51] fpga: altera: Move altera_validate to the top   Marek Vasut
  • [U-Boot] [PATCH 31/51] fpga: altera: Make altera_validate return normal values   Marek Vasut
  • [U-Boot] [PATCH 31/51] fpga: altera: Make altera_validate return normal values   Pavel Machek
  • [U-Boot] [PATCH 31/51] fpga: altera: Make altera_validate return normal values   Marek Vasut
  • [U-Boot] [PATCH 32/51] fpga: altera: Clean up enums in altera.h   Marek Vasut
  • [U-Boot] [PATCH 33/51] fpga: altera: Turn the switches into table lookup   Marek Vasut
  • [U-Boot] [PATCH V2 34/51] arm: socfpga: fpga: Add SoCFPGA FPGA programming interface   Marek Vasut
  • [U-Boot] [PATCH 35/51] arm: socfpga: reset: Add function to reset FPGA bridges   Marek Vasut
  • [U-Boot] [PATCH 36/51] arm: socfpga: sysmgr: Add FPGA bits into system manager   Marek Vasut
  • [U-Boot] [PATCH 37/51] arm: cache: Add support for write-allocate D-Cache   Marek Vasut
  • [U-Boot] [PATCH 38/51] arm: socfpga: cache: Define cacheline size   Marek Vasut
  • [U-Boot] [PATCH 39/51] arm: socfpga: cache: Enable D-Cache   Marek Vasut
  • [U-Boot] [PATCH 40/51] arm: socfpga: cache: Enable PL310 L2 cache   Marek Vasut
  • [U-Boot] [PATCH 41/51] arm: socfpga: scu: Add SCU register file   Marek Vasut
  • [U-Boot] [PATCH 42/51] arm: socfpga: nic301: Add NIC-301 GPV register file   Marek Vasut
  • [U-Boot] [PATCH 43/51] arm: socfpga: pl310: Map SDRAM to 0x0   Marek Vasut
  • [U-Boot] [PATCH 44/51] arm: socfpga: nic301: Add NIC-301 configuration code   Marek Vasut
  • [U-Boot] [PATCH 45/51] arm: socfpga: Enable DWMMC for SOCFPGA   Marek Vasut
  • [U-Boot] [PATCH 46/51] arm: socfpga: Enable SDMMC boot for SOCFPGA U-Boot   Marek Vasut
  • [U-Boot] [PATCH 47/51] arm: socfpga: Move cache_enable to CPU code   Marek Vasut
  • [U-Boot] [PATCH 48/51] arm: socfpga: Add command to control HPS-FPGA bridges   Marek Vasut
  • [U-Boot] [PATCH 49/51] arm: socfpga: Clean up SoCFPGA configuration   Marek Vasut
  • [U-Boot] [PATCH 50/51] arm: socfpga: Split SoCFPGA configuration   Marek Vasut
  • [U-Boot] [PATCH 50/51] arm: socfpga: Split SoCFPGA configuration   Dinh Nguyen
  • [U-Boot] [PATCH 50/51] arm: socfpga: Split SoCFPGA configuration   Pavel Machek
  • [U-Boot] [PATCH 50/51] arm: socfpga: Split SoCFPGA configuration   Marek Vasut
  • [U-Boot] [PATCH 50/51] arm: socfpga: Split SoCFPGA configuration   Marek Vasut
  • [U-Boot] [PATCH 51/51] arm: socfpga: Use CMD_FS_GENERIC   Marek Vasut
  • [U-Boot] [PATCH 51/51] arm: socfpga: Use CMD_FS_GENERIC   Michal Simek
  • [U-Boot] [PATCH 28/51] fpga: altera: Clean up altera_validate function   Pavel Machek
  • [U-Boot] [PATCH 00/51] arm: socfpga: Usability fixes   Stefan Roese
  • [U-Boot] [PATCH 00/51] arm: socfpga: Usability fixes   Pavel Machek
  • [U-Boot] [PATCH 00/51] arm: socfpga: Usability fixes   Marek Vasut
  • [U-Boot] [PATCH V2 01/51] net: Remove unused CONFIG_DW_SEARCH_PHY from configs   Marek Vasut
  • [U-Boot] [PATCH 03/51] net: dwc: Fix cache alignment issues   Marek Vasut
  • [U-Boot] [PATCH 08/51] arm: socfpga: Complete the list of base addresses   Marek Vasut
  • [U-Boot] [PATCH 0/3] usb: dwc2: Add and enable DWC2 driver   Marek Vasut
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Pavel Machek
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Pavel Machek
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Dinh Nguyen
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Dinh Nguyen
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Stephen Warren
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Stephen Warren
  • [U-Boot] [PATCH 1/3] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
  • [U-Boot] [PATCH 0/3] usb: dwc2: Add and enable DWC2 driver   Lukasz Majewski
  • [U-Boot] [PATCH 2/3] arm: socfpga: config: Enable USB support   Marek Vasut
  • [U-Boot] [PATCH 2/3] arm: socfpga: config: Enable USB support   Dinh Nguyen
  • [U-Boot] [PATCH 2/3] arm: socfpga: config: Enable USB support   Marek Vasut
  • [U-Boot] [PATCH 2/3] arm: socfpga: config: Enable USB support   Dinh Nguyen
  • [U-Boot] [PATCH 2/3] arm: socfpga: config: Enable USB support   Marek Vasut
  • [U-Boot] [PATCH 3/3] arm: rpi: Enable USB support on RPi   Marek Vasut
  • [U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
  • [U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena   Stefano Babic
  • [U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
  • [U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
  • [U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
  • [U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena   Tim Harvey
  • [U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
  • [U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
  • [U-Boot] [PATCH V3] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
  • [U-Boot] Pul request: u-boot-arm/master   Albert ARIBAUD
    • [U-Boot] Pul request: u-boot-arm/master   Tom Rini
    • [U-Boot] [PATCH 0/3] arm: add interrupt support   Georges Savoundararadj
    • [U-Boot] [PATCH 2/3] arm1176: move exception vectors after relocation   Georges Savoundararadj
    • [U-Boot] [PATCH 3/3] arm: enable_interrupts: set sp in IRQ/FIQ modes   Georges Savoundararadj
    • [U-Boot] [PATCH 0/3] arm: add interrupt support   Masahiro Yamada
    • [U-Boot] [PATCH 0/3] arm: add interrupt support   Georges Savoundararadj
    • [U-Boot] [PATCH 0/3] arm: add interrupt support   Masahiro YAMADA
    • [U-Boot] [PATCH 0/3] arm: add interrupt support   Albert ARIBAUD
    • [U-Boot] [PATCH 0/3] arm: add interrupt support   Albert ARIBAUD
    • [U-Boot] [PATCH v2 0/3] arm: fix exception handling   Georges Savoundararadj
    • [U-Boot] [PATCH v2 1/3] arm: make .vectors section allocatable   Georges Savoundararadj
    • [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Georges Savoundararadj
    • [U-Boot] [PATCH v2 3/3] arm: interrupt_init: set sp in IRQ/FIQ modes   Georges Savoundararadj
    • [U-Boot] [PATCH 1/3] arm: make .vectors section allocatable   Georges Savoundararadj
    • [U-Boot] [PATCH 1/3] arm: make .vectors section allocatable   Albert ARIBAUD
    • [U-Boot] [PATCH 1/3] arm: make .vectors section allocatable   Georges Savoundararadj
    • [U-Boot] [PATCH] powerpc/t104xrdb: make T104x board compliant in u-boot   Vijay Rai
    • [U-Boot] [PATCH] tools: remove reformat.py   Masahiro Yamada
    • [U-Boot] tools: remove reformat.py   Tom Rini
  • [U-Boot] uart test   shobin b
    • [U-Boot] uart test   Wolfgang Denk
      • [U-Boot] uart test   Michal Suchanek
  • [U-Boot] U-Boot Test Routine   Amin Sahebi
    • [U-Boot] [u-boot] [PATCH V1 1/1] mmc: sunxi: add SDHC support for sun6i/sun7i/sun8i   Wills Wang
    • [U-Boot] [u-boot] [PATCH V1 1/1] mmc: sunxi: add SDHC support for sun6i/sun7i/sun8i   Hans de Goede
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH v3 10/10] kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig   Masahiro Yamada
    • [U-Boot] [PATCH v3 10/10] kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig   Simon Glass
    • [U-Boot] [PATCH v3 10/10] kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig   Masahiro Yamada
    • [U-Boot] [PATCH v3 10/10] kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig   Simon Glass
    • [U-Boot] [U-Boot, v3, 10/10] kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig   Tom Rini
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Simon Glass
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Michal Simek
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Masahiro Yamada
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Tom Rini
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Simon Glass
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Tom Rini
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Stephen Warren
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Tom Rini
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Stephen Warren
    • [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v3, 09/10] kconfig: move CONFIG_OF_* to Kconfig   Tom Rini
    • [U-Boot] [PATCH] imx6: add Bachmann OT1200 board v2   Christian Gmeiner
    • [U-Boot] [PATCH] kconfiglib: change SPDX-License-Identifier to ISC   Christian Gmeiner
    • [U-Boot] [PATCH] kconfiglib: change SPDX-License-Identifier to ISC   Christian Gmeiner
    • [U-Boot] [PATCH] imx6: add Bachmann OT1200 board v2   Stefano Babic
• [U-Boot] Add support for Congatec Conga-QEVAl board   Hänel-Baas, Alexander
  • [U-Boot] Add support for Congatec Conga-QEVAl board   Otavio Salvador
    • [U-Boot] [U-boot] [Patch 0/5] keystone2: generalize keystone_net driver usage   Ivan Khoronzhuk
    • [U-Boot] [U-boot] [Patch 1/5] net: keystone_net: remove SoC specific emac_regs structure   Ivan Khoronzhuk
    • [U-Boot] [U-boot] [Patch 2/5] net: keystone_net: add support for NETCP v1.5   Ivan Khoronzhuk
    • [U-Boot] [U-boot] [Patch 3/5] net: keystone_net: move header file from arch to ti-common   Ivan Khoronzhuk
    • [U-Boot] [U-boot] [Patch 4/5] net: keystone_net: increase MDIO clock frequency   Ivan Khoronzhuk
    • [U-Boot] [U-boot] [Patch 5/5] net: keystone_net: remove redundant code from keystone_net.c   Ivan Khoronzhuk
    • [U-Boot] [WIP PATCH 0/2] arm: socfpga: Add Cadence QSPI support   Stefan Roese
    • [U-Boot] [WIP PATCH 0/2] arm: socfpga: Add Cadence QSPI support   Chin Liang See
    • [U-Boot] [WIP PATCH 0/2] arm: socfpga: Add Cadence QSPI support   Stefan Roese
    • [U-Boot] [WIP PATCH 1/2] spi: Add Cadence QSPI driver used by SoCFPGA   Stefan Roese
    • [U-Boot] [WIP PATCH 2/2] arm: socfpga: Add Cadence QSPI support to config header   Stefan Roese
    • [U-Boot] [PATCH] powerpc/BSC9131RDB: Add mtdparts suppport   Ashish Kumar
    • [U-Boot] [PATCH] powerpc/BSC9132qds: Add mtdparts suppport   Ashish Kumar
    • [U-Boot] [PATCH] powerpc/BSC9132qds: Add mtdparts suppport   Ashish Kumar
    • [U-Boot] [PATCH] powerpc/BSC9131RDB: Add mtdparts suppport   Ashish Kumar
    • [U-Boot] [PATCH] powerpc/BSC9131RDB: Add mtdparts suppport   Ashish Kumar
    • [U-Boot] [PATCH] powerpc/BSC9132qds: Add mtdparts suppport   Ashish Kumar
• [U-Boot] Please pull u-boot-x86.git branch misc   Simon Glass
  • [U-Boot] Please pull u-boot-x86.git branch misc   Masahiro YAMADA
    • [U-Boot] Please pull u-boot-x86.git branch misc   Simon Glass
      • [U-Boot] Please pull u-boot-x86.git branch misc   Masahiro YAMADA
      • [U-Boot] Please pull u-boot-x86.git branch misc   Tom Rini
  • [U-Boot] Please pull u-boot-x86.git branch misc   Tom Rini
    • [U-Boot] [PATCH 0/14] dm: omap: Provide access to driver model for am335x, and move boards   Simon Glass
    • [U-Boot] [PATCH 01/14] dm: gpio: Support numbered GPIOs   Simon Glass
    • [U-Boot] [PATCH 02/14] dm: serial: Reset the watchdog while waiting in getc()   Simon Glass
    • [U-Boot] [PATCH 03/14] dm: serial: ns16550: Correct logic for checking for character   Simon Glass
    • [U-Boot] [PATCH 04/14] dm: ns16550: Use an address instead of a pointer for the uart base   Simon Glass
    • [U-Boot] [PATCH 05/14] dm: ns16550: Correct the probe logic for platform data   Simon Glass
    • [U-Boot] [PATCH 06/14] dm: serial: Support CONFIG_CONS_INDEX if available   Simon Glass
    • [U-Boot] [PATCH 07/14] dm: dts: omap: Select correct console for beaglebone   Simon Glass
    • [U-Boot] [PATCH 08/14] dm: omap: gpio: Put _get_gpio_value() logic into its own function   Simon Glass
    • [U-Boot] [PATCH 09/14] dm: omap: gpio: Support driver model   Simon Glass
    • [U-Boot] [PATCH 10/14] dm: am33xx: Provide platform data for GPIOs   Simon Glass
    • [U-Boot] [PATCH 11/14] dm: am33xx: Provide platform data for serial   Simon Glass
    • [U-Boot] [PATCH 12/14] dm: omap: serial: Add driver model support   Simon Glass
    • [U-Boot] [PATCH 13/14] dm: am335x: Remove serial options from CONFIG_SYS_EXTRA_OPTIONS   Simon Glass
    • [U-Boot] [PATCH 14/14] dm: am33xx: Move to driver model for GPIO and serial   Simon Glass
    • [U-Boot] [PATCH 1/2] mx6qsabreauto: Add HDMI support   Fabio Estevam
    • [U-Boot] [PATCH 2/2] mx6sabre_common: Add HDMI config to common code   Fabio Estevam
• [U-Boot] enabling ecc on P2041 and QoreIQ familly not valid for memory >= 4GB   York Sun
• [U-Boot] [PATCH v6 0/4] Implement "fastboot flash" for eMMC   Steve Rae
  • [U-Boot] [PATCH v1] fastboot: handle flash write to GPT partition   Steve Rae
  • [U-Boot] [PATCH v1] fastboot: handle flash write to GPT partition   Marek Vasut
  • [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
  • [U-Boot] [PATCH 1/4] dm: rpi: Convert GPIO driver to driver model   Simon Glass
  • [U-Boot] [PATCH 2/4] dm: serial: Tidy up the pl01x driver   Simon Glass
  • [U-Boot] [PATCH 3/4] dm: serial: Support driver model in pl01x driver   Simon Glass
  • [U-Boot] [PATCH 4/4] dm: rpi: Move serial to driver model   Simon Glass
  • [U-Boot] Newbie question   Donald Dade
    • [U-Boot] Newbie question   Jeroen Hofstee
      • [U-Boot] [PATCH][v2] driver/mtd: Use generic timer API for FSL IFC, eLBC   Prabhakar Kushwaha
      • [U-Boot] [PATCH][v2] driver/mtd: Use generic timer API for FSL IFC, eLBC   Scott Wood
      • [U-Boot] [PATCH][v2] driver/mtd: Use generic timer API for FSL IFC, eLBC   York Sun
      • [U-Boot] [PATCH] powerpc/mpc85xx: Use IFC accessor function   Prabhakar Kushwaha
      • [U-Boot] [PATCH RESEND] cmd_nand: Update (nand_info_t*)nand after arg_off(_size) call   Rostislav Lisovy
      • [U-Boot] [PATCH RESEND] mtd: nand: am335x: Fix 'bit-flip' errors in SPL   Rostislav Lisovy
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Sean Cross
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
      • [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
      • [U-Boot] [PATCH] checkpatch: remove unnecessary + after {8,8}   Marek Vasut
      • [U-Boot] checkpatch: remove unnecessary + after {8,8}   Tom Rini
      • [U-Boot] [PATCH] odroid: clock: set aclk_cores to 200MHz   Przemyslaw Marczak
      • [U-Boot] [PATCH] i2c: mxs: Add I2C multibus support   Marek Vasut
      • [U-Boot] [PATCH] i2c: mxs: Add I2C multibus support   Heiko Schocher
      • [U-Boot] [PATCH] i2c: mxs: Add I2C multibus support   Otavio Salvador
      • [U-Boot] [PATCH] i2c: mxs: Add I2C multibus support   Marek Vasut
      • [U-Boot] [PATCH] i2c: mxs: Add I2C multibus support   Heiko Schocher
      • [U-Boot] [PATCH] i2c: mxs: Add I2C multibus support   Fabio Estevam
      • [U-Boot] [PATCH] i2c: mxs: Add I2C multibus support   Heiko Schocher
      • [U-Boot] [PATCH 1/4] arm: m28evk: Test if bootscript exists before loading it   Marek Vasut
      • [U-Boot] [PATCH 2/4] arm: m53evk: Test if bootscript exists before loading it   Marek Vasut
      • [U-Boot] [PATCH 2/4] arm: m53evk: Test if bootscript exists before loading it   Stefano Babic
      • [U-Boot] [PATCH 3/4] arm: m28evk: Enable FS_GENERIC   Marek Vasut
      • [U-Boot] [PATCH 3/4] arm: m28evk: Enable FS_GENERIC   Stefano Babic
      • [U-Boot] [PATCH 4/4] arm: m53evk: Enable FS_GENERIC   Marek Vasut
      • [U-Boot] [PATCH 4/4] arm: m53evk: Enable FS_GENERIC   Stefano Babic
      • [U-Boot] [PATCH 1/4] arm: m28evk: Test if bootscript exists before loading it   Stefano Babic
      • [U-Boot] [WIP PATCH 0/2 v2] arm: socfpga: Add Cadence QSPI support   Stefan Roese
      • [U-Boot] [WIP PATCH 1/4 v2] spi: Add Cadence QSPI driver used by SoCFPGA   Stefan Roese
      • [U-Boot] [WIP PATCH 1/4 v2] spi: Add Cadence QSPI driver used by SoCFPGA   Pavel Machek
      • [U-Boot] [WIP PATCH 1/4 v2] spi: Add Cadence QSPI driver used by SoCFPGA   Marek Vasut
      • [U-Boot] [WIP PATCH 0/2 v2] arm: socfpga: Add Cadence QSPI support   Marek Vasut
      • [U-Boot] [WIP PATCH 2/4 v2] arm: socfpga: Add Cadence QSPI support to config header   Stefan Roese
      • [U-Boot] [WIP PATCH 3/4 v2] arm: socfpga: Don't define CONFIG_SPI_FLASH_QUAD   Stefan Roese
      • [U-Boot] [WIP PATCH 4/4 v2] arm: socfpga: Don't enable dcache (because of cadence SPI driver problem)   Stefan Roese
      • [U-Boot] [WIP PATCH 4/4 v2] arm: socfpga: Don't enable dcache (because of cadence SPI driver problem)   Marek Vasut
      • [U-Boot] [WIP PATCH 4/4 v2] arm: socfpga: Don't enable dcache (because of cadence SPI driver problem)   Stefan Roese
      • [U-Boot] [WIP PATCH 4/4 v2] arm: socfpga: Don't enable dcache (because of cadence SPI driver problem)   Michael Trimarchi
      • [U-Boot] [PATCH 0/4] sata: ahci: fix OMAP L3 error   Roger Quadros
      • [U-Boot] [PATCH 1/4] ahci: Don't start command DMA engine before buffers are set   Roger Quadros
      • [U-Boot] [PATCH 2/4] OMAP5+: sata/scsi: Implement scsi_init()   Roger Quadros
      • [U-Boot] [PATCH 3/4] ARM: OMAP5+: sata: Move scsi_scan() to the right place   Roger Quadros
      • [U-Boot] [PATCH 4/4] common: spl_sata: perform SCSI scan before getting device   Roger Quadros
      • [U-Boot] [PATCH 1/2] common: Makefile: allow for spl builds with env_fat   Felipe Balbi
      • [U-Boot] [PATCH 2/2] arm: am43xx: switch over to CONFIG_ENV_IS_IN_FAT   Felipe Balbi
      • [U-Boot] [PATCH 2/2] arm: am43xx: switch over to CONFIG_ENV_IS_IN_FAT   Felipe Balbi
      • [U-Boot] [PATCH 1/2] common: Makefile: allow for spl builds with env_fat   Felipe Balbi
      • [U-Boot] [U-boot] [Patch] ARM: keystone: clock: fix main pll ratio div definitions   Ivan Khoronzhuk
  • [U-Boot] Please pull u-boot-dm.git   Simon Glass
    • [U-Boot] Please pull u-boot-dm.git   Tom Rini
      • [U-Boot] [PATCH v3 0/15] samsung: Use common config files with Samsung boards   Simon Glass
      • [U-Boot] [PATCH v3 01/15] Exynos: Use 900MHz ARM frequency in SPL for peach_pit   Simon Glass
      • [U-Boot] [PATCH v3 02/15] exynos5: Enable data cache   Simon Glass
      • [U-Boot] [PATCH v3 03/15] cros_ec: power: Add a tunnelled version of the tps65090 driver   Simon Glass
      • [U-Boot] [PATCH v3 03/15] cros_ec: power: Add a tunnelled version of the tps65090 driver   Minkyu Kang
      • [U-Boot] [PATCH v3 03/15] cros_ec: power: Add a tunnelled version of the tps65090 driver   Simon Glass
      • [U-Boot] [PATCH v3 04/15] cros_ec: exynos: Use the correct tps65090 driver in each case   Simon Glass
      • [U-Boot] [PATCH v3 05/15] dm: exynos: Split out the cros_ec drivers   Simon Glass
      • [U-Boot] [PATCH v3 06/15] exynos: dts: Add device tree node for cros_ec keyboard   Simon Glass
      • [U-Boot] [PATCH v3 07/15] exynos: Rename -dt config files to -common   Simon Glass
      • [U-Boot] [PATCH v3 08/15] exynos: Move common exynos settings into a common file   Simon Glass
      • [U-Boot] [PATCH v3 09/15] exynos: Move common smdk5420 things to common file   Simon Glass
      • [U-Boot] [PATCH v3 10/15] exynos: config: Move cros_ec and tps65090 out of smdk boards   Simon Glass
      • [U-Boot] [PATCH v3 11/15] config: Move arndale to use common exynos5250 file   Simon Glass
      • [U-Boot] [PATCH v3 12/15] config: Move smdkv310 to use common exynos4 file   Simon Glass
      • [U-Boot] [PATCH v3 13/15] samsung: Enable device tree for s5p_goni   Simon Glass
      • [U-Boot] [PATCH v3 14/15] samsung: Enable device tree for smdkc100   Simon Glass
      • [U-Boot] [PATCH v3 15/15] exynos: Enable pre-relocation malloc()   Simon Glass
      • [U-Boot] [PATCH v3 0/15] samsung: Use common config files with Samsung boards   Simon Glass
      • [U-Boot] [PATCH] sandbox: Fix README to indicate that vendor name is unset   Simon Glass
      • [U-Boot] [PATCH] sandbox: Fix README to indicate that vendor name is unset   Jagan Teki
      • [U-Boot] [RFC PATCH 0/14] RFC: dm: Implement driver model support in SPL   Simon Glass
      • [U-Boot] [RFC PATCH 01/14] dm: dts: Move omap device tree includes to correct place   Simon Glass
      • [U-Boot] [RFC PATCH 02/14] dm: Split the simple malloc() implementation into its own file   Simon Glass
      • [U-Boot] [RFC PATCH 03/14] dm: arm: spl: Allow simple malloc() in SPL   Simon Glass
      • [U-Boot] [RFC PATCH 04/14] dm: spl: Make simple malloc() available when enabled   Simon Glass
      • [U-Boot] [RFC PATCH 05/14] dm: spl: Allow driver model to be used   Simon Glass
      • [U-Boot] [RFC PATCH 06/14] dm: Allow device removal features to be dropped   Simon Glass
      • [U-Boot] [RFC PATCH 07/14] dm: Allow stdio registration to be dropped   Simon Glass
      • [U-Boot] [RFC PATCH 08/14] dm: Disable dm_warn() in SPL   Simon Glass
      • [U-Boot] [RFC PATCH 09/14] dm: tegra: Add platform data for the SPL uart   Simon Glass
      • [U-Boot] [RFC PATCH 09/14] dm: tegra: Add platform data for the SPL uart   Stephen Warren
      • [U-Boot] [RFC PATCH 09/14] dm: tegra: Add platform data for the SPL uart   Simon Glass
      • [U-Boot] [RFC PATCH 10/14] dm: tegra: Add platform data for the GPIO driver   Simon Glass
      • [U-Boot] [RFC PATCH 11/14] dm: arm: spl: Make driver model linker lists available   Simon Glass
      • [U-Boot] [RFC PATCH 12/14] dm: tegra: Don't used named GPIOs in SPL   Simon Glass
      • [U-Boot] [RFC PATCH 13/14] dm: tegra: Enable driver model in SPL and adjust the GPIO driver   Simon Glass
      • [U-Boot] [RFC PATCH 14/14] dm: Update documentation to include CONFIG_DM... options   Simon Glass
      • [U-Boot] [PATCH] ARM: rpi_b: query internal MAC address from firmware   Stephen Warren
      • [U-Boot] ARM: rpi_b: query internal MAC address from firmware   Jeroen Hofstee
      • [U-Boot] ARM: rpi_b: query internal MAC address from firmware   Stephen Warren
      • [U-Boot] ARM: rpi_b: query internal MAC address from firmware   Marek Vasut
      • [U-Boot] ARM: rpi_b: query internal MAC address from firmware   Stephen Warren
      • [U-Boot] ARM: rpi_b: query internal MAC address from firmware   Marek Vasut
• [U-Boot] u-boot bootargs not passing to kernel command line   Nilesh Kokane
  • [U-Boot] u-boot bootargs not passing to kernel command line   Wolfgang Denk
    • [U-Boot] u-boot bootargs not passing to kernel command line   Nilesh Kokane
      • [U-Boot] [PATCH] ARM: atmel: switch at91sam9263ek to generic board   Bo Shen
      • [U-Boot] [PATCH v2 00/10] ARM: sunxi: Add basic support for Allwinner A31 (sun6i)   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 01/10] ARM: sunxi: Use macro values for setting UART GPIO pull-ups   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 01/10] ARM: sunxi: Use macro values for setting UART GPIO pull-ups   Ian Campbell
      • [U-Boot] [PATCH v2 03/10] ARM: sun6i: Add base address for the new controllers in A31   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 04/10] ARM: sun6i: Add support for the power reset control module found on the A31   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 04/10] ARM: sun6i: Add support for the power reset control module found on the A31   Ian Campbell
      • [U-Boot] [PATCH v2 05/10] ARM: sun6i: Add clock support   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 05/10] ARM: sun6i: Add clock support   Ian Campbell
      • [U-Boot] [PATCH v2 06/10] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 06/10] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Ian Campbell
      • [U-Boot] [PATCH v2 07/10] ARM: sun6i: Define UART0 pins for A31   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 07/10] ARM: sun6i: Define UART0 pins for A31   Ian Campbell
      • [U-Boot] [PATCH v2 08/10] ARM: sun6i: Setup the A31 UART0 muxing   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 08/10] ARM: sun6i: Setup the A31 UART0 muxing   Ian Campbell
      • [U-Boot] [PATCH v2 09/10] ARM: sunxi: Add basic A31 support   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 09/10] ARM: sunxi: Add basic A31 support   Ian Campbell
      • [U-Boot] [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Ian Campbell
      • [U-Boot] [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Ian Campbell
      • [U-Boot] [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Ian Campbell
      • [U-Boot] [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Maxime Ripard
      • [U-Boot] [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Hans de Goede
      • [U-Boot] [linux-sunxi] Re: [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Ian Campbell
      • [U-Boot] [linux-sunxi] Re: [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Iain Paton
      • [U-Boot] [linux-sunxi] Re: [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Hans de Goede
      • [U-Boot] [linux-sunxi] Re: [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Ian Campbell
      • [U-Boot] [linux-sunxi] Re: [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Hans de Goede
      • [U-Boot] [linux-sunxi] Re: [PATCH v2 10/10] ARM: sun6i: Add Colombus board defconfig   Ian Campbell
      • [U-Boot] [PATCH v2 02/10] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined   Chen-Yu Tsai
• [U-Boot] [PATCH 1/5] usb: ehci: mxs: Add board-specific callbacks   Marek Vasut
  • [U-Boot] [PATCH 1/5] usb: ehci: mxs: Add board-specific callbacks   Stefano Babic
    • [U-Boot] [PATCH v2 0/9] Add a better USB keyboard polling method   Hans de Goede
    • [U-Boot] [PATCH v2 8/9] usb: kbd: Cache pipe, interval and packetsize   Hans de Goede
    • [U-Boot] [PATCH v2 9/9] usb: kbd: Add (optional) support for using an interrupt queue for polling   Hans de Goede
    • [U-Boot] [PATCH v2 0/9] Add a better USB keyboard polling method   Marek Vasut
    • [U-Boot] [PATCH v2 0/9] Add a better USB keyboard polling method   Hans de Goede
    • [U-Boot] [PATCH v2 0/9] Add a better USB keyboard polling method   Marek Vasut
    • [U-Boot] [PATCH v2 1/9] usb: ehci: Do not disable an already disabled periodic schedule   Hans de Goede
    • [U-Boot] [PATCH v2 2/9] usb: ehci: Move interrupt packet length check to create_int_queue   Hans de Goede
    • [U-Boot] [PATCH v2 3/9] usb: ehci: Move cache invalidation to poll_int_queue   Hans de Goede
    • [U-Boot] [PATCH v2 4/9] usb: Make pollable int support available outside of ehci-hcd.c   Hans de Goede
    • [U-Boot] [PATCH v2 5/9] usb: kbd: Remove unused usb_kbd_generic_poll function   Hans de Goede
    • [U-Boot] [PATCH v2 6/9] usb: kbd: Fix memleak on usb_kbd_deregister()   Hans de Goede
    • [U-Boot] [PATCH v2 7/9] stdio: Fix memleak on stdio_deregister   Hans de Goede
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
  • [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
    • [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
      • [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
      • [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
      • [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH 1/2] mini2440: remove board support   Jagan Teki
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Sean Cross
  • [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
    • [U-Boot] [PATCH] wandboard: Select CONFIG_CMD_FUSE   Fabio Estevam
    • [U-Boot] [Patch v2, 2/2] board/ls1021aqds_d4: Add DDR4 support   York Sun
• [U-Boot] [PATCH] cmd_mmc: fix bootpart-resize maxarg to 4   Wally Yeh
  • [U-Boot] [PATCH 2/4] qe: add u-qe support to arm board   Zhao Qiang
• [U-Boot] [PATCH v4 5/5] i.mx6q: mx6qsabrelite: Update the network configuration   Shelly-YunQing Ye
  • [U-Boot] [PATCH 0/2] Introduce CONFIG_SUPPORT_SPL/TPL   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] kconfig: add CONFIG_SUPPORT_SPL   Masahiro Yamada
  • [U-Boot] [PATCH 2/2] kconfig: add CONFIG_SUPPORT_TPL   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] blackfin: spi: move spi max chip select to spi.h   Scott Jiang
  • [U-Boot] [PATCH 2/2] spi: add common spi3 controller driver   Scott Jiang
  • [U-Boot] [U-Boot, v6, 1/4] usb/gadget: fastboot: add eMMC support for flash command   Tom Rini
  • [U-Boot] [U-Boot, v6, 2/4] usb/gadget: fastboot: add support for flash command   Tom Rini
  • [U-Boot] [U-Boot,v6,3/4] usb/gadget: fastboot: minor cleanup   Tom Rini
  • [U-Boot] [U-Boot, v6, 4/4] usb/gadget: fastboot: implement sparse format   Tom Rini
  • [U-Boot] tools/env: change stripping strategy to allow no-stripping   Tom Rini
• [U-Boot] [PATCH] cmd_mmc: fix bootpart-resize maxarg to 4   Wally Yeh
  • [U-Boot] [PATCH] cmd_mmc: fix bootpart-resize maxarg to 4   DEATHX
    • [U-Boot] [PATCH] ls102x: configs - Add hash command in freescale LS1 platforms   Ruchika Gupta
    • [U-Boot] [PATCH 1/3] crypto/fsl: Add command for encapsulating/decapsulating blobs   Ruchika Gupta
    • [U-Boot] [PATCH 2/3] mpc85xx: configs - Enable blob command in freescale platforms   Ruchika Gupta
    • [U-Boot] [PATCH 3/3] ls102x: Add support for secure boot and enable blob command   Ruchika Gupta
    • [U-Boot] [PATCH 1/3][v2] crypto/fsl: Add command for encapsulating/decapsulating blobs   Ruchika Gupta
    • [U-Boot] [PATCH 2/3][v2] mpc85xx: configs - Enable blob command in freescale platforms   Ruchika Gupta
    • [U-Boot] [PATCH 3/3][v2] ls102x: Add support for secure boot and enable blob command   Ruchika Gupta
    • [U-Boot] [PATCH 3/3][v2] ls102x: Add support for secure boot and enable blob command   Ruchika Gupta
    • [U-Boot] [Patch v3, 2/2] board/ls1021aqds: Add DDR4 support   York Sun
    • [U-Boot] [Patch v4, 2/2] board/ls1021aqds: Add DDR4 support   York Sun
• [U-Boot] Please pull u-boot-mpc85xx   York Sun
  • [U-Boot] Please pull u-boot-mpc85xx   Tom Rini
• [U-Boot] [PATCH v2] powerpc/t104xrdb: Add Support of rcw for T1042RDB in u-boot   York Sun
• [U-Boot] [PATCH v4] powerpc/t104xrdb: Add T1042RDB board support   York Sun
• [U-Boot] [PATCH] powerpc/8xxx: Fix in USB device-tree fixup   York Sun
  • [U-Boot] [PATCH] nand/denali: Document CONFIG symbols   Scott Wood
  • [U-Boot] [PATCH] driver/net/fm/memac_phy: set NEG bit for external MDIOs   Joe Hershberger
  • [U-Boot] [PATCH] Fman/mEMAC: mEMAC fix for 10G MAC and PHY   Joe Hershberger
    • [U-Boot] [PATCH] mtd: nand: mxs: Add ECC geometry for 2048b/112b NAND   Marek Vasut
    • [U-Boot] [PATCH 1/2] arm: m28evk: Zap superfluous tab in env   Marek Vasut
    • [U-Boot] [PATCH 2/2] arm: m53evk: Zap superfluous tab in env   Marek Vasut
    • [U-Boot] [PATCH] patman: Check commit_match before stripping leading whitespace   Scott Wood
    • [U-Boot] [PATCH] patman: Check commit_match before stripping leading whitespace   Simon Glass
    • [U-Boot] [PATCH] patman: Check commit_match before stripping leading whitespace   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
  • [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq   York Sun
  • [U-Boot] Please pull u-boot-fsl-qoriq   Tom Rini
• [U-Boot] [PATCH] board/ls2085a: Update env_addr after NOR flash relocation   York Sun
• [U-Boot] [PATCH] board/ls2085a: Add support of NOR and NAND flash for simulator   York Sun
  • [U-Boot] [PATCH] exynos: update maintainer of Snow and SMDK5420 board   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] powerpc/mpc85xx: modify erratum A007186   Zhao Qiang
  • [U-Boot] [PATCH 1/2] powerpc/mpc85xx: modify erratum A007186   York Sun
  • [U-Boot] [PATCH 2/2] powerpc/mpc85xx: modify erratum A007212   Zhao Qiang
  • [U-Boot] [PATCH 2/2] powerpc/mpc85xx: modify erratum A007212   York Sun
  • [U-Boot] [PATCH 2/2] powerpc/mpc85xx: modify erratum A007212   qiang.zhao at freescale.com
  • [U-Boot] [PATCH 2/2] powerpc/mpc85xx: modify erratum A007212   York Sun
  • [U-Boot] [PATCH 2/2] powerpc/mpc85xx: modify erratum A007212   qiang.zhao at freescale.com
  • [U-Boot] [PATCH 2/2] powerpc/mpc85xx: modify erratum A007212   York Sun
  • [U-Boot] [PATCH] spi:ls102xqds:Support for compatibility for QSPI and DSPI modules drivers   Chao Fu
  • [U-Boot] [PATCH] spi:ls102xqds:Support for compatibility for QSPI and DSPI modules drivers   Andreas Färber
  • [U-Boot] [PATCH V3 1/3] usb: eth: fix Makefile   Rene Griessl
  • [U-Boot] [PATCH V3 2/3] usb: eth: add ASIX AX88179 DRIVER   Rene Griessl
  • [U-Boot] [PATCH V3 2/3] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
  • [U-Boot] [PATCH V3 2/3] usb: eth: add ASIX AX88179 DRIVER   René Griessl
  • [U-Boot] [PATCH V3 2/3] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
  • [U-Boot] [PATCH V3 2/3] usb: eth: add ASIX AX88179 DRIVER   René Griessl
  • [U-Boot] [PATCH V3 2/3] usb: eth: add ASIX AX88179 DRIVER   Marek Vasut
  • [U-Boot] [PATCH V3 1/3] usb: eth: fix Makefile   Marek Vasut
  • [U-Boot] [PATCH V3 3/3] usb: eth: enable AX88179 DRIVER for ARNDALE 5250   Rene Griessl
• [U-Boot] Parsing of multi-line env vars broken   Wolfgang Denk
  • [U-Boot] [PATCH 3/4] qe: add qe support to ls1021aqds   Zhao Qiang
  • [U-Boot] [PATCH 4/4] qe: add qe support for ls1021a-twr board   Zhao Qiang
  • [U-Boot] [PATCH v2 0/2] Introduce CONFIG_SUPPORT_SPL/TPL   Masahiro Yamada
  • [U-Boot] [PATCH v2 1/2] kconfig: add CONFIG_SUPPORT_SPL   Masahiro Yamada
  • [U-Boot] [PATCH v2 1/2] kconfig: add CONFIG_SUPPORT_SPL   Simon Glass
  • [U-Boot] [PATCH v2 2/2] kconfig: add CONFIG_SUPPORT_TPL   Masahiro Yamada
  • [U-Boot] [PATCH] kconfig: fix another bug of "make savedefconfig"   Masahiro Yamada
  • [U-Boot] [PATCH] kconfig: fix another bug of "make savedefconfig"   Simon Glass
  • [U-Boot] [PATCH v2] exynos: update maintainer of Snow and SMDK5420 board   Masahiro Yamada
  • [U-Boot] [PATCH 0/7] kconfig: Move CONFIG_SYS_HZ and CONFIG_USE_PRIVATE_LIBGCC, bug fixes   Masahiro Yamada
  • [U-Boot] [PATCH 1/7] kconfig: move CONFIG_SYS_HZ to lib/Kconfig   Masahiro Yamada
  • [U-Boot] [PATCH 1/7] kconfig: move CONFIG_SYS_HZ to lib/Kconfig   Marek Vasut
  • [U-Boot] [PATCH 2/7] x86: set CONFIG_USE_PRIVATE_LIBGCC to y   Masahiro Yamada
  • [U-Boot] [PATCH 3/7] kbuild: drop CONFIG_USE_PRIVATE_LIBGCC=<path/to/libgcc> syntax   Masahiro Yamada
  • [U-Boot] [PATCH 4/7] kconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig   Masahiro Yamada
  • [U-Boot] [PATCH 5/7] kbuild: fix a bug of the u-boot-spl link rule   Masahiro Yamada
  • [U-Boot] [PATCH 6/7] kconfig: invoke silentoldconfig if spl, tpl/.config is updated   Masahiro Yamada
  • [U-Boot] [PATCH 7/7] mips: enable CONFIG_USE_PRIVATE_LIBGCC by default   Masahiro Yamada
  • [U-Boot] [PATCH v2 0/7] Add SD boot support for LS1021AQDS/TWR board   Alison Wang
  • [U-Boot] [PATCH v2 1/7] ls102xa: pblimage: Add pblimage tool support for LS102xA   Alison Wang
  • [U-Boot] [PATCH v2 2/7] spl: Use u-boot.img instead of u-boot.bin   Alison Wang
  • [U-Boot] [PATCH v2 3/7] arm: spl: Add I2C linker list in generic .lds   Alison Wang
  • [U-Boot] [PATCH v2 4/7] common: spl: Add interactive DDR debugger support for SPL   Alison Wang
  • [U-Boot] [PATCH v2 5/7] ls102xa: qixis: Add CONFIG_QIXIS_I2C_ACCESS macro   Alison Wang
  • [U-Boot] [PATCH v2 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Alison Wang
  • [U-Boot] [PATCH v2 7/7] arm: ls102xa: Add SD boot support for LS1021ATWR board   Alison Wang
  • [U-Boot] [U-boot] [Patch 0/5] keystone2: serdes: add seredes driver   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 1/5] soc: add soc specific drivers directory   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 2/5] soc: keystone_serdes: create a separate SGMII SerDes driver   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 3/5] soc: keystone_serdes: enhance to use cmu/comlane/lane specific configurations   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 4/5] soc: keystone_serdes: generalize to be used by other sub systems   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch 5/5] soc: keystone_serdes: generalize configuration mechanism   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch] configs: ks2_evm: enable misc_init_r   Ivan Khoronzhuk
  • [U-Boot] [PATCH for-next] arndale: Enable config_distro_defaults.h   Ian Campbell
  • [U-Boot] [PATCH for-next] arndale: Enable config_distro_defaults.h   Ian Campbell
  • [U-Boot] [PATCH] arndale: Use config_distro_bootcmd.h   Ian Campbell
  • [U-Boot] [PATCH v5 0/7] Add support for Panasonic UniPhier SoCs/boards   Masahiro Yamada
  • [U-Boot] [PATCH v5 1/7] mtd: denali: add Denali controller configs to Kconfig   Masahiro Yamada
  • [U-Boot] [PATCH v5 4/7] ARM: UniPhier: add UniPhier SoC support code   Masahiro Yamada
  • [U-Boot] [PATCH v5 2/7] mtd: denali: add Denali NAND driver for SPL   Masahiro Yamada
  • [U-Boot] [PATCH v5 3/7] serial: add UniPhier serial driver   Masahiro Yamada
  • [U-Boot] [PATCH v5 5/7] ARM: UniPhier: add Kconfig and defconfig   Masahiro Yamada
  • [U-Boot] [PATCH v5 6/7] MAINTAINERS: add me as a maintainer of UniPhier platform   Masahiro Yamada
  • [U-Boot] [PATCH v5 7/7] git-mailrc: add me as a maintainer of UniPhier platform   Masahiro Yamada
• [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Julien Castets
• [U-Boot] Please pull u-boot-dm.git branch for-tom   Simon Glass
  • [U-Boot] Please pull u-boot-dm.git branch for-tom   Felipe Balbi
    • [U-Boot] Please pull u-boot-dm.git branch for-tom   Masahiro YAMADA
  • [U-Boot] Please pull u-boot-dm.git branch for-tom   Tom Rini
• [U-Boot] [PATCH V2 1/2] ARM: rpi_b: query internal MAC address from firmware   Stephen Warren
  • [U-Boot] [PATCH V2 1/2] ARM: rpi_b: query internal MAC address from firmware   Marek Vasut
    • [U-Boot] [PATCH V2 1/2] ARM: rpi_b: query internal MAC address from firmware   Stephen Warren
      • [U-Boot] [PATCH V2 1/2] ARM: rpi_b: query internal MAC address from firmware   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: rpi_b: enable USB/DHCP/PXE in bootcmd   Stephen Warren
• [U-Boot] U-Boot panasonic repo   Masahiro YAMADA
  • [U-Boot] U-Boot panasonic repo   Wolfgang Denk
    • [U-Boot] U-Boot panasonic repo   Masahiro YAMADA
      • [U-Boot] U-Boot panasonic repo   Wolfgang Denk
      • [U-Boot] U-Boot panasonic repo   Masahiro YAMADA
• [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Wolfgang Denk
  • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Julien Castets
    • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Wolfgang Denk
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Julien Castets
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Wolfgang Denk
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Julien Castets
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Wolfgang Denk
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Marek Vasut
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Wolfgang Denk
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Julien Castets
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Wolfgang Denk
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Julien Castets
      • [U-Boot] [PATCH] tools: mkimage can read input on /dev/stdin   Wolfgang Denk
• [U-Boot] ARM, SPL: gd / sp setup mostly omap (and sunxi)   Jeroen Hofstee
• [U-Boot] [PATCH] lsxl: convert to generic board and fix typo   Michael Walle
• [U-Boot] [PATCH v2] powerpc/mpc85xx: modify erratum A007186   Zhao Qiang
• [U-Boot] [GENERIC_BOARD] env problems before relocation with ppc8360   Simon Glass
  • [U-Boot] [GENERIC_BOARD] env problems before relocation with ppc8360   Valentin Longchamp
• [U-Boot] [PATCH 0/4] Deep sleep patches for Freescale QorIQ platforms   Yuantian.Tang at freescale.com
  • [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   Yuantian.Tang at freescale.com
  • [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Make armv7_init_nonsec() usable before relocation   Yuantian.Tang at freescale.com
  • [U-Boot] [PATCH 3/4] arm: ls102xa: Fixed a register definition error   Yuantian.Tang at freescale.com
  • [U-Boot] [PATCH 4/4] arm: ls1021qds: Add deep sleep support   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2   Iain Paton
  • [U-Boot] [PATCH] sun7i: Add support for Olimex A20-OLinuXino-LIME2   Hans de Goede
• [U-Boot] [PATCH 0/4] dm: a collection of minor fixes in Driver-Model   Masahiro Yamada
  • [U-Boot] [PATCH 1/4] dm: fix comments   Masahiro Yamada
    • [U-Boot] [PATCH 1/4] dm: fix comments   Simon Glass
  • [U-Boot] [PATCH 3/4] dm: do not check dm_root before searching in uclass_root   Masahiro Yamada
    • [U-Boot] [PATCH 3/4] dm: do not check dm_root before searching in uclass_root   Simon Glass
      • [U-Boot] [PATCH 3/4] dm: do not check dm_root before searching in uclass_root   Masahiro YAMADA
      • [U-Boot] [PATCH 3/4] dm: do not check dm_root before searching in uclass_root   Simon Glass
      • [U-Boot] [PATCH 3/4] dm: do not check dm_root before searching in uclass_root   Masahiro Yamada
  • [U-Boot] [PATCH 4/4] dm: simplify the loop in lists_driver_lookup_name()   Masahiro Yamada
    • [U-Boot] [PATCH 4/4] dm: simplify the loop in lists_driver_lookup_name()   Simon Glass
    • [U-Boot] [PATCH 4/4] dm: simplify the loop in lists_driver_lookup_name()   Simon Glass
      • [U-Boot] [PATCH 4/4] dm: simplify the loop in lists_driver_lookup_name()   Igor Grinberg
• [U-Boot] [PATCH 2/4] dm: do not check the existence of uclass operation   Masahiro Yamada
  • [U-Boot] [PATCH 2/4] dm: do not check the existence of uclass operation   Simon Glass
• [U-Boot] environment expectations of config_distro_bootcmd.h   Ian Campbell
  • [U-Boot] environment expectations of config_distro_bootcmd.h   Stephen Warren
    • [U-Boot] environment expectations of config_distro_bootcmd.h   Otavio Salvador
      • [U-Boot] environment expectations of config_distro_bootcmd.h   Ian Campbell
• [U-Boot] Please sync u-boot-arm/master with u-boot/master   Masahiro YAMADA
• [U-Boot] [PATCH 0/5] powerpc: remove some orphan boards   Masahiro Yamada
  • [U-Boot] [PATCH 1/5] powerpc: ppc4xx: remove board support for KAREF and METROBOX   Masahiro Yamada
  • [U-Boot] [PATCH 4/5] powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7   Masahiro Yamada
  • [U-Boot] [PATCH 5/5] powerpc: mpc5xxx: remove board support for MVBC_P and MVSMR   Masahiro Yamada
• [U-Boot] [PATCH 2/5] powerpc: ppc4xx: remove board support for CRAYL1   Masahiro Yamada
• [U-Boot] [PATCH 3/5] powerpc: ppc4xx: remove board support for bluestone   Masahiro Yamada
• [U-Boot] [PATCH] sunxi: Fix gmac not working reliable on the Bananapi   Hans de Goede
  • [U-Boot] [linux-sunxi] [PATCH] sunxi: Fix gmac not working reliable on the Bananapi   Siarhei Siamashka
  • [U-Boot] [PATCH] sunxi: Fix gmac not working reliable on the Bananapi   Ian Campbell
• [U-Boot] [PATCH] ci_udc: force full-speed operation if !CONFIG_USB_GADGET_DUALSPEED   Eric Nelson
  • [U-Boot] [PATCH] ci_udc: force full-speed operation if !CONFIG_USB_GADGET_DUALSPEED   Marek Vasut
    • [U-Boot] [PATCH] ci_udc: force full-speed operation if !CONFIG_USB_GADGET_DUALSPEED   Eric Nelson
  • [U-Boot] [PATCH V2] usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED   Eric Nelson
    • [U-Boot] [PATCH V2] usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED   Felipe Balbi
      • [U-Boot] [PATCH V2] usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED   Eric Nelson
      • [U-Boot] [PATCH] usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED   Eric Nelson
      • [U-Boot] [PATCH] usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED   Felipe Balbi
      • [U-Boot] [PATCH] usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED   Marek Vasut
      • [U-Boot] [PATCH] usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED   Eric Nelson
      • [U-Boot] [PATCH] usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED   Marek Vasut
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi   Zoltan HERPAI
• [U-Boot] [linux-sunxi] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Siarhei Siamashka
  • [U-Boot] [linux-sunxi] [PATCH 5/7] sun4i: Add support for a number of new sun4i boards   Arnd Gronenberg
• [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Simon Glass
  • [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Thierry Reding
    • [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Simon Glass
• [U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards   Simon Glass
• [U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards   Simon Glass
  • [U-Boot] [PATCH v4 01/15] Exynos: Use 900MHz ARM frequency in SPL for peach_pit   Simon Glass
  • [U-Boot] [PATCH v4 02/15] exynos5: Enable data cache   Simon Glass
  • [U-Boot] [PATCH v4 03/15] cros_ec: power: Add a tunnelled version of the tps65090 driver   Simon Glass
  • [U-Boot] [PATCH v4 04/15] cros_ec: exynos: Use the correct tps65090 driver in each case   Simon Glass
  • [U-Boot] [PATCH v4 05/15] dm: exynos: Split out the cros_ec drivers   Simon Glass
  • [U-Boot] [PATCH v4 06/15] exynos: dts: Add device tree node for cros_ec keyboard   Simon Glass
  • [U-Boot] [PATCH v4 07/15] exynos: Rename -dt config files to -common   Simon Glass
  • [U-Boot] [PATCH v4 08/15] exynos: Move common exynos settings into a common file   Simon Glass
  • [U-Boot] [PATCH v4 09/15] exynos: Move common smdk5420 things to common file   Simon Glass
  • [U-Boot] [PATCH v4 10/15] exynos: config: Move cros_ec and tps65090 out of smdk boards   Simon Glass
  • [U-Boot] [PATCH v4 11/15] config: Move arndale to use common exynos5250 file   Simon Glass
  • [U-Boot] [PATCH v4 12/15] config: Move smdkv310 to use common exynos4 file   Simon Glass
  • [U-Boot] [PATCH v4 13/15] samsung: Enable device tree for s5p_goni   Simon Glass
  • [U-Boot] [PATCH v4 14/15] samsung: Enable device tree for smdkc100   Simon Glass
  • [U-Boot] [PATCH v4 15/15] exynos: Enable pre-relocation malloc()   Simon Glass
  • [U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards   Minkyu Kang
• [U-Boot] [PATCH 1/4] Add snoop disable for slave port 0, port 1 and port 2   Alison Wang
  • [U-Boot] [PATCH 2/4] arm: ls102xa: Remove bit reversing for SCFG registers   Alison Wang
    • [U-Boot] [PATCH 2/4] arm: ls102xa: Remove bit reversing for SCFG registers   Prabhakar Kushwaha
      • [U-Boot] [PATCH 2/4] arm: ls102xa: Remove bit reversing for SCFG registers   Huan Wang
  • [U-Boot] [PATCH 3/4] ls102xa: ifc: nor: fix the write issue when bytes unaligned.   Alison Wang
    • [U-Boot] [PATCH 3/4] ls102xa: ifc: nor: fix the write issue when bytes unaligned.   Prabhakar Kushwaha
  • [U-Boot] [PATCH 4/4] arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH] exynos: update maintainer of Snow and SMDK5420 board   Masahiro Yamada
  • [U-Boot] [PATCH] exynos: update maintainer of Snow and SMDK5420 board   Masahiro Yamada
• [U-Boot] [PATCH] powerpc/mpc85xx:Update RESET_VECTOR_ADDRESS for 768KB u-boot size   Ruchika Gupta
  • [U-Boot] [PATCH] powerpc/mpc85xx:Update RESET_VECTOR_ADDRESS for 768KB u-boot size   York Sun
• [U-Boot] [PATCH 1/3][v3] crypto/fsl: Add command for encapsulating/decapsulating blobs   Ruchika Gupta
  • [U-Boot] [PATCH 2/3][v3] mpc85xx: configs - Enable blob command in freescale platforms   Ruchika Gupta
  • [U-Boot] [PATCH 3/3][v3] ls102x: Add support for secure boot and enable blob command   Ruchika Gupta
• [U-Boot] [PATCH][v2] powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot   Ruchika Gupta
• [U-Boot] [PATCH 1/5] usb: ehci: mxs: Add board-specific callbacks   Stefano Babic
• [U-Boot] Generic Board Progress   Masahiro Yamada
  • [U-Boot] Generic Board Progress   Michal Simek
• [U-Boot] [PATCH v2] mvebu_mmc: Driver addition   Mario Schuknecht
• [U-Boot] Git reorganization   Detlev Zundel
• [U-Boot] [PATCH v4 1/3] spi:rewrite the Freescale DSPI driver.   Simon Glass
• [U-Boot] [PATCH v4 1/2] imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board   Ye.Li
  • [U-Boot] [PATCH v4 2/2] imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards   Ye.Li
    • [U-Boot] [PATCH v4 2/2] imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards   Stefano Babic
  • [U-Boot] [PATCH v4 1/2] imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board   Stefano Babic
• [U-Boot] UBI issues on SAMA5D31 NOR flash   Andy Pont
  • [U-Boot] UBI issues on SAMA5D31 NOR flash   Heiko Schocher
    • [U-Boot] UBI issues on SAMA5D31 NOR flash   Andy Pont
      • [U-Boot] UBI issues on SAMA5D31 NOR flash   Heiko Schocher
      • [U-Boot] UBI issues on SAMA5D31 NOR flash   Andy Pont
• [U-Boot] [PATCH] beagleboard: Remove side effects of i2c2 pullup resisters initialization code   Alexander Kochetkov
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi   jonsmirl at gmail.com
  • [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi   Hans de Goede
    • [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi   jonsmirl at gmail.com
    • [U-Boot] [linux-sunxi] [PATCH] sunxi: Fix gmac not working reliable on the Bananapi   Koen Kooi
• [U-Boot] [U-boot] [Patch v2 0/5] keystone2: generalize keystone_net driver usage   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2 1/5] net: keystone_net: remove SoC specific emac_regs structure   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2 2/5] net: keystone_net: add support for NETCP v1.5   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2 3/5] net: keystone_net: move header file from arch to ti-common   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2 4/5] net: keystone_net: increase MDIO clock frequency   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2 5/5] net: keystone_net: remove redundant code from keystone_net.c   Ivan Khoronzhuk
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
  • [U-Boot] [PATCH v3 01/29] sandbox: dts: Add a SPI device and cros_ec device   Simon Glass
  • [U-Boot] [PATCH v3 02/29] dm: core: Add functions for iterating through device children   Simon Glass
  • [U-Boot] [PATCH v3 03/29] dm: core: Allow parents to pass data to children during probe   Simon Glass
  • [U-Boot] [PATCH v3 04/29] dm: core: Add a clarifying comment on struct udevice's seq member   Simon Glass
  • [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI   Simon Glass
  • [U-Boot] [PATCH v3 06/29] dm: sandbox: Add a SPI emulation uclass   Simon Glass
  • [U-Boot] [PATCH v3 07/29] dm: Remove spi_init() from board_r.c when using driver model   Simon Glass
  • [U-Boot] [PATCH v3 08/29] dm: Add spi.h header to a few files   Simon Glass
  • [U-Boot] [PATCH v3 09/29] dm: spi: Adjust cmd_spi to work with driver model   Simon Glass
  • [U-Boot] [PATCH v3 10/29] dm: sandbox: spi: Move to driver model   Simon Glass
  • [U-Boot] [PATCH v3 11/29] dm: spi: Rename soft_spi.c to soft_spi_legacy.c   Simon Glass
  • [U-Boot] [PATCH v3 12/29] dm: spi: Remove SPI_INIT feature   Simon Glass
  • [U-Boot] [PATCH v3 13/29] dm: spi: Add soft_spi implementation   Simon Glass
  • [U-Boot] [PATCH v3 14/29] dm: exynos: Convert SPI to driver model   Simon Glass
  • [U-Boot] [PATCH v3 15/29] dm: spi: Add documentation on how to convert over SPI drivers   Simon Glass
  • [U-Boot] [PATCH v3 16/29] exynos: universal_c210: Move to driver model soft_spi   Simon Glass
  • [U-Boot] [PATCH v3 17/29] sf: Tidy up public and private header files   Simon Glass
  • [U-Boot] [PATCH v3 18/29] spi: Use error return value in sf_ops   Simon Glass
  • [U-Boot] [PATCH v3 19/29] dm: sf: Add a uclass for SPI flash   Simon Glass
  • [U-Boot] [PATCH v3 20/29] dm: Convert spi_flash_probe() and 'sf probe' to use driver model   Simon Glass
  • [U-Boot] [PATCH v3 21/29] dm: sf: sandbox: Convert SPI flash driver to driver model   Simon Glass
  • [U-Boot] [PATCH v3 22/29] dm: exynos: config: Use driver model for SPI flash   Simon Glass
  • [U-Boot] [PATCH v3 23/29] dm: spi: Add tests   Simon Glass
  • [U-Boot] [PATCH v3 24/29] dm: sf: Add tests for SPI flash   Simon Glass
  • [U-Boot] [PATCH v3 25/29] dm: tegra: dts: Add aliases for spi on tegra30 boards   Simon Glass
  • [U-Boot] [PATCH v3 26/29] dm: tegra: spi: Convert to driver model   Simon Glass
    • [U-Boot] [PATCH v3 26/29] dm: tegra: spi: Convert to driver model   Igor Grinberg
  • [U-Boot] [PATCH v3 27/29] dm: cros_ec: Add support for driver model   Simon Glass
  • [U-Boot] [PATCH v3 28/29] dm: sandbox: cros_ec: Move sandbox cros_ec to driver module   Simon Glass
  • [U-Boot] [PATCH v3 29/29] dm: exynos: cros_ec: Move cros_ec_spi to driver model   Simon Glass
• [U-Boot] [U-boot] [Patch v2 0/5] keystone2: serdes: add seredes driver   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2 2/5] net: keystone_net: use mdio_reset function   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2 3/5] net: keystone_net: register MDIO bus   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2 4/5] net: keystone_net: register eth PHYs on MDIO bus   Ivan Khoronzhuk
  • [U-Boot] [U-boot] [Patch v2 5/5] net: keystone_net: use general get link function   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 1/5] net: phy: print a number of phy that is not found   Ivan Khoronzhuk
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi   Siarhei Siamashka
• [U-Boot] [patch 2/2] spl: Lightweight UBI and UBI fastmap support   Richard Weinberger
  • [U-Boot] [patch 2/2] spl: Lightweight UBI and UBI fastmap support   Heiko Schocher
• [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard   Tom Everett
• [U-Boot] [PATCH 1/3] drivers: usb: fsl: Move USB Errata checking code   Nikhil Badola
• [U-Boot] [PATCH 2/3] drivers: usb: Make usb device-tree fixup code architecture independent   Nikhil Badola
• [U-Boot] [PATCH 3/3] drivers: usb: fsl: Add USB device-tree errata framework   Nikhil Badola
• [U-Boot] drivers/net/phy/icplus.c delete reason   Dvorkin Dmitry
  • [U-Boot] drivers/net/phy/icplus.c delete reason   Wolfgang Denk
  • [U-Boot] drivers/net/phy/icplus.c delete reason   Masahiro Yamada
• [U-Boot] [RFC PATCH] genboardscfg.py: use Python2 from default path   Wolfgang Denk
  • [U-Boot] [RFC PATCH] genboardscfg.py: use Python2 from default path   Masahiro Yamada
    • [U-Boot] [RFC PATCH] genboardscfg.py: use Python2 from default path   Wolfgang Denk
• [U-Boot] [PATCH] SPDX License cleanup for LiMon imported files   Wolfgang Denk
• [U-Boot] Activate generic board feature on all MPL boards   David Müller
  • [U-Boot] [PATCH 1/4] PIP405: convert to generic board   David Müller
  • [U-Boot] [PATCH 2/4] MIP405: convert to generic board   David Müller
  • [U-Boot] [PATCH 3/4] VCMA9: convert to generic board   David Müller
  • [U-Boot] [PATCH 4/4] PATI: convert to generic board   David Müller
• [U-Boot] [PATCH] ARM: mx6: gw_ventana: Remove superfluous memset of GD in board_init_f   Stefan Roese
  • [U-Boot] [PATCH] ARM: mx6: gw_ventana: Remove superfluous memset of GD in board_init_f   Tim Harvey
• [U-Boot] [PATCH] PATI: fix broken SPI access   David Müller
  • [U-Boot] [PATCH] PATI: fix broken SPI access   Jagan Teki
    • [U-Boot] [PATCH] PATI: fix broken SPI access   David Müller (ELSOFT AG)
      • [U-Boot] [PATCH] PATI: fix broken SPI access   Jagan Teki
      • [U-Boot] [PATCH] PATI: fix broken SPI access   Tom Rini
      • [U-Boot] [PATCH] PATI: fix broken SPI access   David Müller (ELSOFT AG)
      • [U-Boot] [PATCH] PATI: fix broken SPI access   Jagan Teki
• [U-Boot] [PATCH] VCMA9: remove EXT2 support   David Müller
• [U-Boot] [PATCH v1] imx6sx: Fix i.MX6SX HAB api function table offset   Nitin Garg
  • [U-Boot] [PATCH v1] imx6sx: Fix i.MX6SX HAB api function table offset   Fabio Estevam
• [U-Boot] [PATCH] mmc: Fix mmc bus width   Mario Schuknecht
• [U-Boot] [PATCH v1] imx6sx: Fix i.MX6SX HAB api function table offset   Nitin Garg
  • [U-Boot] [PATCH v1] imx6sx: Fix i.MX6SX HAB api function table offset   Fabio Estevam
  • [U-Boot] [PATCH v1] imx6sx: Fix i.MX6SX HAB api function table offset   Stefano Babic
    • [U-Boot] [PATCH v1] imx6sx: Fix i.MX6SX HAB api function table offset   Fabio Estevam
      • [U-Boot] [PATCH v1] imx6sx: Fix i.MX6SX HAB api function table offset   Stefano Babic
      • [U-Boot] [PATCH v1] imx6sx: Fix i.MX6SX HAB api function table offset   Fabio Estevam
• [U-Boot] Please increase the image size for km boards   York Sun
• [U-Boot] [PATCH v2] imx6sx: Fix i.MX6SX HAB api function table offset   Nitin Garg
• [U-Boot] [PATCH v3] imx6sx: Fix i.MX6SX HAB api function table offset   Nitin Garg
• [U-Boot] [PATCH fix for v2014.10 0/1] sunxi: Fix gmac not working reliable on the Bananapi   Hans de Goede
  • [U-Boot] [PATCH fix for v2014.10] sunxi: Fix gmac not working reliable on the Bananapi   Hans de Goede
• [U-Boot] [PATCH] mx6sxsabresd: Fix PCI reset and power GPIO assignments   Fabio Estevam
• [U-Boot] Boot reason in SPL for OMAP4   Gregoire Gentil
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Eric Nelson
  • [U-Boot] [PATCH 1/3] usb: gadget: fastboot: add max-download-size variable   Eric Nelson
  • [U-Boot] [PATCH 2/3] usb: gadget: fastboot: explicitly set radix of maximum download size   Eric Nelson
  • [U-Boot] [PATCH 3/3] usb: gadget: fastboot: terminate commands with NULL   Eric Nelson
  • [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Marek Vasut
    • [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Eric Nelson
• [U-Boot] OMAP4 video driver   Michael Trimarchi
• [U-Boot] [PATCH 1/1] ARM: sheevaplug: convert to generic board support   David du Colombier
  • [U-Boot] [PATCH 1/1] ARM: sheevaplug: convert to generic board support   David du Colombier
  • [U-Boot] [PATCH 1/1] ARM: sheevaplug: convert to generic board support   David du Colombier