July 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jul 1 01:29:20 CEST 2012
Ending: Tue Jul 31 23:20:03 CEST 2012
Messages: 2436

• [U-Boot] [PATCH] powerpc/mpc83xx: increment malloc heap size   Kim Phillips
  • [U-Boot] [PATCH] powerpc/mpc83xx: increment malloc heap size   Kim Phillips
  • [U-Boot] Modifying IP&mac address   Ran Shalit
    • [U-Boot] Modifying IP&mac address   Mike Frysinger
• [U-Boot] [PATCH v5] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Andreas Bießmann
  • [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
  • [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Andreas Bießmann
  • [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
  • [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Andreas Bießmann
  • [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
• [U-Boot] [PATCH] cfb_console: Add support for some ANSI terminal escape codes   Pali Rohár
  • [U-Boot] [PATCH] cfb_console: Add support for some ANSI terminal escape codes   Pali Rohár
    • [U-Boot] [PATCH 1/2] microblaze: expand and correct configuration comments   Stephan Linz
    • [U-Boot] [PATCH 1/2] microblaze: expand and correct configuration comments   Michal Simek
    • [U-Boot] [PATCH 2/2] microblaze: move ENV onto top of flash   Stephan Linz
    • [U-Boot] [PATCH 2/2] microblaze: move ENV onto top of flash   Michal Simek
    • [U-Boot] [PATCH 2/2] microblaze: move ENV onto top of flash   Stephan Linz
    • [U-Boot] [PATCH 2/2] microblaze: move ENV onto top of flash   Michal Simek
• [U-Boot] Is it possible to boot the U-boot from the another U-boot from the flash area   Ishwar Saunshi
  • [U-Boot] [PATCH v3 1/3] AM335x : Add USB support for AM335x in u-boot   Harman Sohanpal
  • [U-Boot] [PATCH v3 1/3] AM335x : Add USB support for AM335x in u-boot   Ilya Yanok
  • [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
    • [U-Boot] Pull request: u-boot-sh/master   Wolfgang Denk
• [U-Boot] [PATCH] video: support exynos fimd driver for various exynos series   Donghwa Lee
  • [U-Boot] [PATCH] video: support exynos fimd driver for various exynos series   Minkyu Kang
    • [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support   Bo Shen
    • [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support   Andreas Bießmann
    • [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support   Bo Shen
    • [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support   Andreas Bießmann
    • [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support   Nicolas Ferre
    • [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support   Andreas Bießmann
    • [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support   Nicolas Ferre
    • [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support   Andreas Bießmann
• [U-Boot] [PATCH v2] arm,davinci: update for enbw_cmc board   Heiko Schocher
  • [U-Boot] [PATCH v2] arm,davinci: update for enbw_cmc board   Tom Rini
  • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Simon Glass
      • [U-Boot] ARM CONFIG_OF_CONTROL status   Stephan Linz
      • [U-Boot] ARM CONFIG_OF_CONTROL status   Simon Glass
      • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
      • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
      • [U-Boot] ARM CONFIG_OF_CONTROL status   Stephan Linz
      • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Stephan Linz
• [U-Boot] [PATCH] microblaze: add missing undefs for UBI and UBIFS   Michal Simek
• [U-Boot] i.mx28 can't power off in imx-boot   alex
  • [U-Boot] i.mx28 can't power off in imx-boot   Marek Vasut
    • [U-Boot] i.mx28 can't power off in imx-boot   alex
• [U-Boot] i.MX6Q SabreLite: Ethernet does not work at Gigabit speed   Wolfgang Grandegger
• [U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices   Simon Guinot
  • [U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices   Prafulla Wadaskar
• [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Måns Rullgård
    • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Lucas Stach
      • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Måns Rullgård
      • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Mike Frysinger
      • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Mike Frysinger
      • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Mike Frysinger
      • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Albert ARIBAUD
  • [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available   Gary Thomas
• [U-Boot] [PATCH 04/10 V4] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Joonyoung Shim
• [U-Boot] [PATCH 08/10 V4] EXYNOS5: CLOCK: Add BPLL support   Joonyoung Shim
• [U-Boot] [PATCH 07/10 V4] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0   Joonyoung Shim
• [U-Boot] [PATCH 09/10 V4] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0   Joonyoung Shim
• [U-Boot] [PATCH 08/10 V4] EXYNOS5: CLOCK: Add BPLL support   Minkyu Kang
• [U-Boot] [PATCH 0/8] video: support newly exynos5 display feature   Donghwa Lee
• [U-Boot] [PATCH 1/8] EXYNOS5: support exynos5 lcd clock control   Donghwa Lee
• [U-Boot] [PATCH 2/8] EXYNOS5: support display system register control   Donghwa Lee
• [U-Boot] [PATCH 3/8] EXYNOS5: support display port phy control function   Donghwa Lee
• [U-Boot] [PATCH 4/8] EXYNOS5: add display port base address   Donghwa Lee
• [U-Boot] [PATCH 5/8] video: support exynos display port drivers   Donghwa Lee
• [U-Boot] [PATCH 6/8] video: add dp_enabled variable in vidinfo structure   Donghwa Lee
• [U-Boot] [PATCH 7/8] video: exynos fb driver supports display port feature   Donghwa Lee
• [U-Boot] [PATCH 8/8] video: support exynos pwm backlight driver   Donghwa Lee
• [U-Boot] [PATCH] video: fixed exynos_mipi_dsi_init() declaration   Donghwa Lee
  • [U-Boot] [PATCH] video: fixed exynos_mipi_dsi_init() declaration   Minkyu Kang
    • [U-Boot] [PATCH] video: fixed exynos_mipi_dsi_init() declaration   Donghwa Lee
      • [U-Boot] [PATCH 00/10 V5] EXYNOS5: Support for Exynos5250 Rev 1.0   Rajeshwari Shinde
      • [U-Boot] [PATCH 01/10 V5] ARCH: SPL: Add parametric board initializer   Rajeshwari Shinde
      • [U-Boot] [PATCH 02/10 V5] SMDK5250: SPL: Define parametric board initializer   Rajeshwari Shinde
      • [U-Boot] [PATCH 03/10 V5] SMDK5250: Add smdk5250-uboot-spl.lds   Rajeshwari Shinde
      • [U-Boot] [PATCH 04/10 V5] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Rajeshwari Shinde
      • [U-Boot] [PATCH 05/10 V5] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0   Rajeshwari Shinde
      • [U-Boot] [PATCH 06/10 V5] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0   Rajeshwari Shinde
      • [U-Boot] [PATCH 07/10 V5] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0   Rajeshwari Shinde
      • [U-Boot] [PATCH 08/10 V5] EXYNOS5: CLOCK: Add BPLL support   Rajeshwari Shinde
      • [U-Boot] [PATCH 09/10 V5] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0   Rajeshwari Shinde
      • [U-Boot] [PATCH 10/10 V5] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0   Rajeshwari Shinde
      • [U-Boot] [PATCH 00/10 V5] EXYNOS5: Support for Exynos5250 Rev 1.0   Minkyu Kang
      • [U-Boot] [PATCH 00/10 V5] EXYNOS5: Support for Exynos5250 Rev 1.0   Rajeshwari Birje
      • [U-Boot] [PATCH] cm-t35: fix incorrect NAND_ECC layout selection   Nikita Kiryanov
      • [U-Boot] [PATCH] cm-t35: fix incorrect NAND_ECC layout selection   Tom Rini
      • [U-Boot] [PATCH] cm-t35: fix incorrect NAND_ECC layout selection   Nikita Kiryanov
      • [U-Boot] [PATCH] beagle: make get_expansion_id(), get_board_revision(), beagle_display_init() static   Peter Meerwald
      • [U-Boot] [PATCH] beagle: fix termination of buddy env setting   Peter Meerwald
      • [U-Boot] [PATCH v7] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Alexandre Belloni
      • [U-Boot] [PATCH v7] AT91SAM9*: Change kernel address in dataflash to match u-boot's size   Andreas Bießmann
      • [U-Boot] [PATCH] doc/git-mailrc: update at91 and avr32   Andreas Bießmann
      • [U-Boot] [PATCH] doc/git-mailrc: update at91 and avr32   Mike Frysinger
• [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Tom Rini
  • [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Marek Vasut
    • [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Tom Rini
• [U-Boot] [PATCH] mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register   Stefano Babic
• [U-Boot] [PATCH] i.MX6 USDHC: Use the ESDHC clock   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
  • [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH] tools/mkenvimage.c: fix basename(3) usage   Wolfgang Denk
• [U-Boot] [STATUS] Final pull requests for -rc1?   Wolfgang Denk
  • [U-Boot] [STATUS] Final pull requests for -rc1?   Tom Rini
  • [U-Boot] [STATUS] Final pull requests for -rc1?   Ilya Yanok
  • [U-Boot] [STATUS] Final pull requests for -rc1?   Tom Rini
  • [U-Boot] [STATUS] Final pull requests for -rc1?   Marek Vasut
  • [U-Boot] [STATUS] Final pull requests for -rc1?   Ilya Yanok
  • [U-Boot] [GIT PULL] mpc83xx: minor fixes   Kim Phillips
    • [U-Boot] [GIT PULL] mpc83xx: minor fixes   Wolfgang Denk
    • [U-Boot] [STATUS] Final pull requests for -rc1?   Albert ARIBAUD
• [U-Boot] Issue with running commands   Sughosh Ganu
  • [U-Boot] Issue with running commands   Wolfgang Denk
  • [U-Boot] Issue with running commands   Christian Riesch
    • [U-Boot] Issue with running commands   Sughosh Ganu
    • [U-Boot] Issue with running commands   Graeme Russ
    • [U-Boot] Issue with running commands   Sughosh Ganu
    • [U-Boot] Issue with running commands   Prabhakar Lad
  • [U-Boot] Issue with running commands   Sughosh Ganu
  • [U-Boot] Issue with running commands   Sughosh Ganu
    • [U-Boot] [PATCH v2] nand: Hack to support 4k page in fsl_elbc_nand   Rafael Beims
      • [U-Boot] [PATCH v2] nand: Hack to support 4k page in fsl_elbc_nand   Scott Wood
    • [U-Boot] [PATCH v3 0/1] fsl_elbc support for 4k devices and factory badblock migration   Rafael Beims
• [U-Boot] [PATCH v3] nand: Hack to support 4k page in fsl_elbc_nand   Rafael Beims
  • [U-Boot] Please pull u-boot-atmel/master   Andreas Bießmann
  • [U-Boot] Please pull u-boot-atmel/master   Albert ARIBAUD
  • [U-Boot] Please pull u-boot-atmel/master   Andreas Bießmann
  • [U-Boot] Please pull u-boot-atmel/master - PLEASE HOLD ON   Albert ARIBAUD
  • [U-Boot] Please pull u-boot-atmel/master - go ahead   Albert ARIBAUD
  • [U-Boot] [PATCH] beagle: removed unused pr_debug #define   Peter Meerwald
• [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
  • [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot   Zhong Hongbo
  • [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot   Zhong Hongbo
  • [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot   Albert ARIBAUD
  • [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot   Zhong Hongbo
  • [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot   Albert ARIBAUD <albert.u.boot at aribaud.net> (by way of Albert ARIBAUD
  • [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot   Zhong Hongbo
  • [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot   Andreas Bießmann
  • [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot   Zhong Hongbo
• [U-Boot] [PATCH v5 00/13] split tegra20 arm7 code into separate SPL   Tom Warren
  • [U-Boot] [PATCH v5 00/13] split tegra20 arm7 code into separate SPL   Simon Glass
    • [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.   Zhong Hongbo
    • [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.   Zhong Hongbo
    • [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.   Minkyu Kang
    • [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.   Jaehoon Chung
    • [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.   Minkyu Kang
    • [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.   Zhong Hongbo
    • [U-Boot] [PATCH v3] arm : Atmel : add at91sam9x5ek board support   Bo Shen
    • [U-Boot] [PATCH v3] arm : Atmel : add at91sam9x5ek board support   Andreas Bießmann
• [U-Boot] [PATCH] mmc: dw-mmc: support DesignWare MMC controller   Jaehoon Chung
• [U-Boot] [PATCH 0/2] EXYNOS: support the DesignWare MMC Controller   Jaehoon Chung
• [U-Boot] [PATCH 1/2] EXYNOS: clock: add the get_mmc_clk function   Jaehoon Chung
• [U-Boot] [PATCH 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Jaehoon Chung
  • [U-Boot] [PATCH 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Rajeshwari Birje
    • [U-Boot] [PATCH 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Jaehoon Chung
    • [U-Boot] [PATCH 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Rajeshwari Birje
• [U-Boot] [PATCH 5/5] microblaze: Wire up fdt emaclite initialization   Michal Simek
  • [U-Boot] [PATCH v6 00/15] split tegra20 arm7 code into separate SPL   Allen Martin
  • [U-Boot] [PATCH v6 01/15] tegra20: rename tegra2 -> tegra20   Allen Martin
  • [U-Boot] [PATCH v6 02/15] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
  • [U-Boot] [PATCH v6 05/15] tegra20: make board mkdir commands unconditional   Allen Martin
  • [U-Boot] [PATCH v6 05/15] tegra20: make board mkdir commands unconditional   Stephen Warren
  • [U-Boot] [PATCH v6 07/15] ARM: Fix arm720t SPL build   Allen Martin
  • [U-Boot] [PATCH v6 09/15] ARM: add tegra20 support to arm720t   Allen Martin
  • [U-Boot] [PATCH v6 11/15] tegra20: move SDRAM param save to later in boot   Allen Martin
  • [U-Boot] [PATCH v6 12/15] tegra20: enable SPL for tegra20 boards   Allen Martin
  • [U-Boot] [PATCH v6 14/15] spl: fix SPL build of private libgcc   Allen Martin
  • [U-Boot] [PATCH v6 00/15] split tegra20 arm7 code into separate SPL   Thierry Reding
  • [U-Boot] [PATCH v6 00/15] split tegra20 arm7 code into separate SPL   Allen Martin
  • [U-Boot] [PATCH v6 03/15] tegra20: rename CONFIG_MACH_TEGRA_GENERIC   Allen Martin
  • [U-Boot] [PATCH v6 04/15] tegra20: tec: add tegra20-common-post.h   Allen Martin
  • [U-Boot] [PATCH v6 06/15] mkconfig: add support for SPL CPU   Allen Martin
  • [U-Boot] [PATCH v6 08/15] tegra20: remove timer_init from SPL build   Allen Martin
  • [U-Boot] [PATCH v6 10/15] tegra20: add u-boot-*-tegra.bin targets   Allen Martin
  • [U-Boot] [PATCH v6 13/15] arm: enable libgcc build for SPL   Allen Martin
  • [U-Boot] [PATCH v6 15/15] tegra20: Remove armv4t build flags   Allen Martin
  • [U-Boot] PCI Express Bus Scanning Issue   vaibhav kothari
  • [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
  • [U-Boot] [PATCH] arm/kirkwood: protect the ENV_SPI #defines   Prafulla Wadaskar
  • [U-Boot] [PATCH] arm/km: use spi claim bus to switch between SPI and NAND   Prafulla Wadaskar
• [U-Boot] [PATCH v2 0/4] mmc: Support designWare Controller   Jaehoon Chung
  • [U-Boot] [PATCH v2 0/4] mmc: Support designWare Controller   Jaehoon Chung
    • [U-Boot] [PATCH v2 0/4] mmc: Support designWare Controller   Minkyu Kang
• [U-Boot] [PATCH v2 1/4] mmc: dw-mmc: support DesignWare MMC Controller   Jaehoon Chung
• [U-Boot] [PATCH 2/4] EXYNOS: clock: add the get_mmc_clk function   Jaehoon Chung
• [U-Boot] [PATCH v2 3/4] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC   Jaehoon Chung
• [U-Boot] [PATCH v2 4/4] mmc: dw-mmc: add dw-mmc's confiuration at Makefile   Jaehoon Chung
  • [U-Boot] [PATCH v2 02/14] arm/km: add kmcoge5un board support   Prafulla Wadaskar
    • [U-Boot] [PATCH v2 02/14] arm/km: add kmcoge5un board support   Holger Brunck
  • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
    • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Wolfgang Denk
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Detlev Zundel
  • [U-Boot] [PATCH v2 04/14] arm/km: remove portl2.h and use km_kirkwood instead   Prafulla Wadaskar
  • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Prafulla Wadaskar
    • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Valentin Longchamp
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Detlev Zundel
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Prafulla Wadaskar
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Holger Brunck
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Wolfgang Denk
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Detlev Zundel
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Wolfgang Denk
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Detlev Zundel
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Holger Brunck
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Wolfgang Denk
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Wolfgang Denk
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Detlev Zundel
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Prafulla Wadaskar
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Joe Hershberger
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Detlev Zundel
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Valentin Longchamp
      • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Prafulla Wadaskar
    • [U-Boot] [PATCH 1/2] igep00x0: default to OMAP-specific serial driver   Enric Balletbò i Serra
• [U-Boot] [PATCH 2/2] igep00x0: default mmcrootfstype to EXT4   Enric Balletbò i Serra
• [U-Boot] arm, kirkwood: KWGBE_PORT_SERIAL_CONTROL1_REG define correct?   Heiko Schocher
  • [U-Boot] arm, kirkwood: KWGBE_PORT_SERIAL_CONTROL1_REG define correct?   Prafulla Wadaskar
• [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
  • [U-Boot] ARM CONFIG_OF_CONTROL status   Simon Glass
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
      • [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function   Lukasz Majewski
      • [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.   Lukasz Majewski
      • [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.   Marek Vasut
      • [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.   Lukasz Majewski
      • [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.   Mike Frysinger
      • [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.   Lukasz Majewski
      • [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.   Mike Frysinger
      • [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Lukasz Majewski
      • [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Marek Vasut
      • [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Lukasz Majewski
      • [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Marek Vasut
      • [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Lukasz Majewski
      • [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Marek Vasut
      • [U-Boot] [PATCH 3/7] dfu: DFU backend implementation   Lukasz Majewski
      • [U-Boot] [PATCH 3/7] dfu: DFU backend implementation   Marek Vasut
      • [U-Boot] [PATCH 3/7] dfu: DFU backend implementation   Lukasz Majewski
      • [U-Boot] [PATCH 3/7] dfu: DFU backend implementation   Marek Vasut
      • [U-Boot] [PATCH 3/7] dfu: DFU backend implementation   Lukasz Majewski
      • [U-Boot] [PATCH 3/7] dfu: DFU backend implementation   Marek Vasut
      • [U-Boot] [PATCH 3/7] dfu: DFU backend implementation   Mike Frysinger
      • [U-Boot] [PATCH 3/7] dfu: DFU backend implementation   Lukasz Majewski
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Marek Vasut
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Tom Rini
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Marek Vasut
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Tom Rini
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Marek Vasut
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Tom Rini
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Stephen Warren
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Tom Rini
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Stephen Warren
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Marek Vasut
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Mike Frysinger
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Marek Vasut
      • [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Marek Vasut
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Marek Vasut
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Mike Frysinger
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Marek Vasut
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Mike Frysinger
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Marek Vasut
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Mike Frysinger
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Marek Vasut
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Mike Frysinger
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Marek Vasut
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Mike Frysinger
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Mike Frysinger
      • [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
      • [U-Boot] [PATCH 6/7] arm:trats: Support for USB UDC driver at TRATS board.   Lukasz Majewski
      • [U-Boot] [PATCH 6/7] arm:trats: Support for USB UDC driver at TRATS board.   Minkyu Kang
      • [U-Boot] [PATCH 6/7] arm:trats: Support for USB UDC driver at TRATS board.   Lukasz Majewski
      • [U-Boot] [PATCH 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS   Lukasz Majewski
      • [U-Boot] [PATCH 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS   Minkyu Kang
      • [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function   Otavio Salvador
      • [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function   Marek Vasut
      • [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function   Lukasz Majewski
      • [U-Boot] [PATCH v2 1/7] dfu:usb: Support for g_dnl composite download gadget.   Lukasz Majewski
      • [U-Boot] [PATCH v2 1/7] dfu:usb: Support for g_dnl composite download gadget.   Marek Vasut
      • [U-Boot] [PATCH v2 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Lukasz Majewski
      • [U-Boot] [PATCH v2 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Marek Vasut
      • [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation   Lukasz Majewski
      • [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation   Marek Vasut
      • [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation   Wolfgang Denk
      • [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation   Lukasz Majewski
      • [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation   Wolfgang Denk
      • [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation   Lukasz Majewski
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Marek Vasut
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Tom Rini
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Tom Rini
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Tom Rini
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Marek Vasut
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Andy Fleming
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Wolfgang Denk
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Marek Vasut
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Wolfgang Denk
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Marek Vasut
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Wolfgang Denk
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
      • [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation   Wolfgang Denk
      • [U-Boot] [PATCH v2 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
      • [U-Boot] [PATCH v2 6/7] arm:trats: Support for USB UDC driver at TRATS board.   Lukasz Majewski
      • [U-Boot] [PATCH v2 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS   Lukasz Majewski
      • [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function   Lukasz Majewski
      • [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function   Tom Rini
      • [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function   Marek Vasut
      • [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function   Lukasz Majewski
      • [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function   Marek Vasut
      • [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function   Marek Vasut
      • [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function   Lukasz Majewski
      • [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function   Marek Vasut
      • [U-Boot] [PATCH v3 0/7] dfu:usb: DFU support via USB Download gadget   Lukasz Majewski
      • [U-Boot] [PATCH v3 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget   Lukasz Majewski
      • [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation   Lukasz Majewski
      • [U-Boot] [PATCH v3 4/7] dfu: MMC specific routines for DFU operation   Lukasz Majewski
      • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Lukasz Majewski
      • [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command   Stephen Warren
      • [U-Boot] [PATCH v3 6/7] arm:trats: Support for USB UDC driver at TRATS board.   Lukasz Majewski
      • [U-Boot] [PATCH v3 6/7] arm:trats: Support for USB UDC driver at TRATS board.   Minkyu Kang
      • [U-Boot] [PATCH v3 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS   Lukasz Majewski
      • [U-Boot] [PATCH v3 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS   Minkyu Kang
      • [U-Boot] [PATCH] arm:trats: loaduimage environment variable defied for TRATS target   Lukasz Majewski
      • [U-Boot] [PATCH] arm:trats: loaduimage environment variable defied for TRATS target   Minkyu Kang
  • [U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support   Joonyoung Shim
    • [U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support   Rajeshwari Birje
      • [U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support   Vivek Gautam
      • [U-Boot] u-boot-xlnx: missing fatload command   Elvis Dowson
• [U-Boot] [PATCH] arch-kirkwood: Ethernet port macro returning incorrect address   Heiko Schocher
• [U-Boot] [RFC][PATCH] net: nfs: make NFS_TIMEOUT configurable   Tetsuyuki Kobayashi
  • [U-Boot] [RFC][PATCH] net: nfs: make NFS_TIMEOUT configurable   Joe Hershberger
  • [U-Boot] [RFC][PATCH] net: nfs: make NFS_TIMEOUT configurable   Tetsuyuki Kobayashi
  • [U-Boot] [RFC][PATCH v2] net: nfs: make NFS_TIMEOUT configurable   Tetsuyuki Kobayashi
  • [U-Boot] [RFC][PATCH v2] net: nfs: make NFS_TIMEOUT configurable   Wolfgang Denk
  • [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable   Tetsuyuki Kobayashi
  • [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable   Tetsuyuki Kobayashi
  • [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable   Joe Hershberger
  • [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable   Tom Rini
  • [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable   Joe Hershberger
  • [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
  • [U-Boot] [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
  • [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
    • [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
    • [U-Boot] Pull request for u-boot-marvell.git - PLEASE HOLD ON   Albert ARIBAUD
    • [U-Boot] Pull request for u-boot-marvell.git - go ahead   Albert ARIBAUD
    • [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
    • [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
    • [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
    • [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
  • [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
  • [U-Boot] [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
    • [U-Boot] [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
      • [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
      • [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
      • [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
      • [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
      • [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
      • [U-Boot] [PATCH 2/2 V4] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
      • [U-Boot] [PATCH 2/2 V4] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
• [U-Boot] [PATCH 0/1] Correct ONFI chip size detection for LUN count > 1   Rafael Beims
• [U-Boot] [PATCH] nand: Support ONFI chip size detection for lun_count > 1   Rafael Beims
• [U-Boot] environment access before relocation does not work on (some) arm   Matthias Fuchs
  • [U-Boot] environment access before relocation does not work on (some) arm   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] igep00x0: default mmcrootfstype to EXT4   Enric Balletbò i Serra
• [U-Boot] [PATCH 1/2] igep00x0: default to OMAP-specific serial driver   Enric Balletbò i Serra
• [U-Boot] [PATCH] ext2fs: fix warning: 'blocknxt' may be used uninitialized   Kim Phillips
  • [U-Boot] [PATCH] ext2fs: fix warning: 'blocknxt' may be used uninitialized   Andreas Bießmann
    • [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized   Kim Phillips
      • [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized   Thierry Reding
      • [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized   Jason Cooper
      • [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized   Wolfgang Denk
      • [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized   Tom Rini
      • [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized   Thierry Reding
• [U-Boot] [PATCH] powerpc/mpc83xx: fix copyright string in serdes.c   Kim Phillips
• [U-Boot] [PATCH] imx: Remove unused Macro CONFIG_DISCOVER_PHY   Ashok
  • [U-Boot] [PATCH] imx: Remove unused Macro CONFIG_DISCOVER_PHY   Fabio Estevam
    • [U-Boot] [PATCH 1/1] igep0020: set OMAP MUX mcspi1_cs2 pin to GPIO 176 mode   Javier Martinez Canillas
    • [U-Boot] [PATCH 1/1] igep0020: set OMAP MUX mcspi1_cs2 pin to GPIO 176 mode   Enric Balletbò i Serra
    • [U-Boot] [PATCH 1/1] igep0020: set OMAP MUX mcspi1_cs2 pin to GPIO 176 mode   Tom Rini
    • [U-Boot] [PATCH 1/1] igep0020: set OMAP MUX mcspi1_cs2 pin to GPIO 176 mode   Javier Martinez Canillas
• [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size   Marek Vasut
  • [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size   Stefan Herbrechtsmeier
    • [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size   Schneider, Kolja
    • [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size   Stefan Herbrechtsmeier
    • [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size   Marek Vasut
    • [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size   Stefan Herbrechtsmeier
    • [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size   Marek Vasut
  • [U-Boot] ARM CONFIG_OF_CONTROL status   Simon Glass
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
      • [U-Boot] ARM CONFIG_OF_CONTROL status   Stephen Warren
      • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
    • [U-Boot] [RFC PATCH] net: emaclite: Support OF initialization   Simon Glass
      • [U-Boot] [RFC PATCH] net: emaclite: Support OF initialization   Michal Simek
• [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Ilya Yanok
  • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
• [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Ilya Yanok
  • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Tom Rini
    • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Ilya Yanok
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Ilya Yanok
    • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
• [U-Boot] [PATCH v4 0/1] fsl_elbc support for 4k devices and factory badblock migration   Rafael Beims
• [U-Boot] [PATCH v4] nand: Hack to support 4k page in fsl_elbc_nand   Rafael Beims
  • [U-Boot] [PATCH 00/12] ARM: rpi_b: many minor enhancements   Stephen Warren
  • [U-Boot] [PATCH 01/12] ARM: arm1176: enable instruction cache in arch_cpu_init()   Stephen Warren
  • [U-Boot] [PATCH 02/12] ARM: rpi_b: enable CONFIG_ARCH_CPU_INIT for icache   Stephen Warren
  • [U-Boot] [PATCH 03/12] ARM: rpi_b: define CONFIG_MACH_TYPE   Stephen Warren
  • [U-Boot] [PATCH 04/12] ARM: rpi_b: include config_cmd_default.h   Stephen Warren
  • [U-Boot] [PATCH 04/12] ARM: rpi_b: include config_cmd_default.h   Tom Rini
  • [U-Boot] [PATCH 05/12] ARM: rpi_b: enable CONFIG_OF_LIBFDT   Stephen Warren
  • [U-Boot] [PATCH 05/12] ARM: rpi_b: enable CONFIG_OF_LIBFDT   Tom Rini
  • [U-Boot] [PATCH 06/12] ARM: rpi_b: set bi_boot_params   Stephen Warren
  • [U-Boot] [PATCH 07/12] ARM: rpi_b: add ATAG support for bootm/bootz   Stephen Warren
  • [U-Boot] [PATCH 08/12] ARM: rpi_b: drop RAM size to 128M   Stephen Warren
  • [U-Boot] [PATCH 09/12] ARM: rpi_b: move stack to top of RAM   Stephen Warren
  • [U-Boot] [PATCH 10/12] ARM: rpi_b: re-order rpi_b.h to keep related defines adjacent   Stephen Warren
  • [U-Boot] [PATCH 11/12] ARM: bcm2835: implement reset using watchdog   Stephen Warren
  • [U-Boot] [PATCH 12/12] ARM: rpi_b: enabled bootz command   Stephen Warren
• [U-Boot] [PATCH 0/2] Add GPIO driver for BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 0/2] Add GPIO driver for BCM2835 SoC   Vikram Narayanan
• [U-Boot] [PATCH 08/12] ARM: rpi_b: drop RAM size to 128M   Stephen Warren
  • [U-Boot] [PATCH 00/10 V6] EXYNOS5: Support for Exynos5250 Rev 1.0   Rajeshwari Shinde
  • [U-Boot] [PATCH 01/10 V6] ARCH: SPL: Add parametric board initializer   Rajeshwari Shinde
  • [U-Boot] [PATCH 02/10 V6] SMDK5250: SPL: Define parametric board initializer   Rajeshwari Shinde
  • [U-Boot] [PATCH 03/10 V6] SMDK5250: Add smdk5250-uboot-spl.lds   Rajeshwari Shinde
  • [U-Boot] [PATCH 04/10 V6] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Rajeshwari Shinde
  • [U-Boot] [PATCH 05/10 V6] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0   Rajeshwari Shinde
  • [U-Boot] [PATCH 06/10 V6] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0   Rajeshwari Shinde
  • [U-Boot] [PATCH 07/10 V6] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0   Rajeshwari Shinde
  • [U-Boot] [PATCH 08/10 V6] EXYNOS5: CLOCK: Add BPLL support   Rajeshwari Shinde
  • [U-Boot] [PATCH 09/10 V6] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0   Rajeshwari Shinde
  • [U-Boot] [PATCH 10/10 V6] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0   Rajeshwari Shinde
  • [U-Boot] [PATCH 00/10 V6] EXYNOS5: Support for Exynos5250 Rev 1.0   Minkyu Kang
• [U-Boot] CONFIG_OF_EMBED/CONFIG_OF_SEPARATE and fdtcontroladdr   Michal Simek
  • [U-Boot] CONFIG_OF_EMBED/CONFIG_OF_SEPARATE and fdtcontroladdr   Simon Glass
• [U-Boot] uboot for vexpress-a15x2   Xiao Jiang
• [U-Boot] [PATCH V2 3/4] common lcd: simplify core functions   Nikita Kiryanov
  • [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
  • [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
  • [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
  • [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
  • [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
  • [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
  • [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Tom Rini
  • [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
  • [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
• [U-Boot] [PATCH 1/3] cm4008: set gd->ram_size in dram_init   Yann Vernier
  • [U-Boot] [PATCH 1/3] cm4008: set gd->ram_size in dram_init   Andreas Bießmann
    • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Yann Vernier
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Andreas Bießmann
• [U-Boot] [PATCH 2/3] cm4008: Fix ROM relocation.   Yann Vernier
  • [U-Boot] [PATCH 2/3] cm4008: Fix ROM relocation.   Andreas Bießmann
• [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Hornung, Michael
  • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Fabio Estevam
    • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Fabio Estevam
    • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Hornung, Michael
      • [U-Boot] [RESEND 00/11] Support for ST-Ericsson snowball board   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 01/11] snowball: Add support for ux500 based snowball board   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 01/11] snowball: Add support for ux500 based snowball board   Wolfgang Denk
      • [U-Boot] [RESEND 02/11] u8500: Moving prcmu to cpu directory   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 02/11] u8500: Moving prcmu to cpu directory   Wolfgang Denk
      • [U-Boot] [RESEND 03/11] snowball: Adding architecture dependent initialisation   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 04/11] snowball: Adding CPU clock initialisation   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 06/11] snowball: applying power to LAN and GBF controllers   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 07/11] u8500: Moving processor-specific functions to cpu area.   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 08/11] u8500: Enabling power to MMC device on AB8500 V2   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 09/11] u8500: Separating mmc config parameters from driver   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 10/11] armv7: Adding cpu specific cache managmenent   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine   mathieu.poirier at linaro.org
      • [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine   Wolfgang Denk
      • [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine   Mathieu Poirier
      • [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine   Fabio Estevam
      • [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine   Wolfgang Denk
      • [U-Boot] [PATCH 1/3] fdt: Add board specific dts inclusion   Stephan Linz
      • [U-Boot] [PATCH 3/3] microblaze: Wire up OF support for emaclite   Stephan Linz
      • [U-Boot] [PATCH 3/3] microblaze: Wire up OF support for emaclite   Simon Glass
      • [U-Boot] [PATCH 3/3] microblaze: Wire up OF support for emaclite   Michal Simek
      • [U-Boot] [PATCH 1/3] fdt: Add board specific dts inclusion   Michal Simek
      • [U-Boot] [PATCH 1/3] fdt: Add board specific dts inclusion   Simon Glass
      • [U-Boot] [PATCH 1/3] fdt: Add board specific dts inclusion   Michal Simek
      • [U-Boot] [PATCH 2/3] microblaze: Wire up dts configuration   Stephan Linz
      • [U-Boot] [PATCH 2/3] microblaze: Wire up dts configuration   Michal Simek
• [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Jorgen Lundman
  • [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Graeme Russ
• [U-Boot] [PATCH v3] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS   Eibach, Dirk
  • [U-Boot] [PATCH] arm: rmobile: kzm9g: Modify sdram area   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/5] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2 3/5] sh: Add support pin function control using GPIO   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2 4/5] serial: sh: Add support Renesas SH73A0   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2 5/5] arm: rmobile: Add supoprt for KMC KZM-A9-GT board   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2 5/5] arm: rmobile: Add supoprt for KMC KZM-A9-GT board   Tetsuyuki Kobayashi
    • [U-Boot] [PATCH v2 5/5] arm: rmobile: Add supoprt for KMC KZM-A9-GT board   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile   Tetsuyuki Kobayashi
    • [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: kzm9g: Adjust hardware setting in lowlevel_init.S   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel   Tetsuyuki Kobayashi
    • [U-Boot] [PATCH 1/3] arm: rmobile: kzm9g: Modify sdram area   Tetsuyuki Kobayashi
    • [U-Boot] [PATCH 2/3] arm: rmobile: kzm9g: Adjust low level hardware setting   Tetsuyuki Kobayashi
    • [U-Boot] [PATCH 3/3] arm: rmobile: kzm9g: change prompt to board specific   Tetsuyuki Kobayashi
    • [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel   Albert ARIBAUD
      • [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v2 0/5] arm: rmobile: kzm9g: enable booting Linux kernel   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v2 1/5] arm: rmobile: kzm9g: Modify sdram area   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v2 2/5] arm: rmobile: kzm9g: Adjust low level hardware setting   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v2 3/5] arm: rmobile: kzm9g: change prompt to board specific   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v2 4/5] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v2 5/5] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v2 0/5] arm: rmobile: kzm9g: enable booting Linux kernel   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v3 0/6] arm: rmobile: kzm9g: enable booting Linux kernel   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v3 2/6] arm: rmobile: kzm9g: Adjust low level hardware setting   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v3 3/6] arm: rmobile: kzm9g: change prompt to board specific   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v3 4/6] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v3 5/6] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v3 6/6] arm: rmobile: kzm9g: Modify bus controller setting for CS4   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v4 0/7] arm: rmobile: kzm9g: enable booting Linux kernel   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v4 1/7] arm: rmobile: kzm9g: Modify sdram area   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v4 1/7] arm: rmobile: kzm9g: Modify sdram area   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH v4 2/7] arm: rmobile: kzm9g: Adjust low level hardware setting   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v4 3/7] arm: rmobile: kzm9g: change prompt to board specific   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v4 3/7] arm: rmobile: kzm9g: change prompt to board specific   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH v4 4/7] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v4 4/7] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH v5] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v5] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH v4 5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v4 5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH v4 6/7] arm: rmobile: kzm9g: Modify bus controller setting for CS4   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v4 6/7] arm: rmobile: kzm9g: Modify bus controller setting for CS4   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH v4 7/7] arm: rmobile: kzm9g: enable reset command   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH v4 7/7] arm: rmobile: kzm9g: enable reset command   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support   Yann Vernier
  • [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support   Andreas Bießmann
    • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: use common cfi_flash support   Yann Vernier
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: use common cfi_flash support   Andreas Bießmann
      • [U-Boot] [PATCH v3] arm: cm4008, cm41xx: use common cfi_flash support   Yann Vernier
      • [U-Boot] [PATCH v3] arm: cm4008, cm41xx: use common cfi_flash support   Andreas Bießmann
      • [U-Boot] [PATCH v3] arm: cm4008, cm41xx: use common cfi_flash support   Albert ARIBAUD
    • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation   Yann Vernier
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation   Yann Vernier
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation   Andreas Bießmann
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation   Albert ARIBAUD
• [U-Boot] [PATCH 0/3] Update Micrel KSZ8695 support to usable state   Yann Vernier
• [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Hornung, Michael
  • [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Albert ARIBAUD
  • [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Albert ARIBAUD
  • [U-Boot] sha256_crypt for uboot   Albert ARIBAUD
    • [U-Boot] sha256_crypt for uboot   Richard Retanubun
      • [U-Boot] sha256_crypt for uboot   Albert ARIBAUD
      • [U-Boot] sha256_crypt for uboot   Richard Retanubun
      • [U-Boot] sha256_crypt for uboot   Albert ARIBAUD
      • [U-Boot] sha256_crypt for uboot   Wolfgang Denk
      • [U-Boot] Please pull u-boot-atmel/master   Andreas Bießmann
      • [U-Boot] Please pull u-boot-atmel/master   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2] Remove unused CONFIG_STACKSIZE   Albert ARIBAUD
    • [U-Boot] [PATCH 1/2] Remove unused CONFIG_STACKSIZE   Rob Herring
      • [U-Boot] [PATCH 1/2] Remove unused CONFIG_STACKSIZE   Albert ARIBAUD
• [U-Boot] USB detection   Manukumar
  • [U-Boot] USB detection   Albert ARIBAUD
    • [U-Boot] USB detection   Marek Vasut
    • [U-Boot] USB detection   Manukumar
    • [U-Boot] USB detection   Albert ARIBAUD
    • [U-Boot] USB detection   Marek Vasut
    • [U-Boot] USB detection   Manukumar
  • [U-Boot] [PATCH] kirkwood: implement kw_sdram_bs_set()   Albert ARIBAUD
    • [U-Boot] [PATCH] kirkwood: implement kw_sdram_bs_set()   Gerlando Falauto
      • [U-Boot] [PATCH] kirkwood: implement kw_sdram_bs_set()   Albert ARIBAUD
      • [U-Boot] [PATCH] kirkwood: implement kw_sdram_bs_set()   Prafulla Wadaskar
• [U-Boot] U-boot Porting   sayed zahid
  • [U-Boot] U-boot Porting   Andreas Bießmann
    • [U-Boot] U-boot Porting   Daniel Schwierzeck
    • [U-Boot] U-boot Porting   Aaron Williams
      • [U-Boot] U-boot Porting   Andreas Bießmann
  • [U-Boot] U-boot Porting   Aaron Williams
    • [U-Boot] U-boot Porting   Andreas Bießmann
      • [U-Boot] U-boot Porting   Aaron Williams
      • [U-Boot] U-boot Porting   Daniel Schwierzeck
      • [U-Boot] U-boot Porting   Aaron Williams
      • [U-Boot] U-boot Porting   Wolfgang Denk
  • [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Albert ARIBAUD
    • [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tom Rini
    • [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Albert ARIBAUD
    • [U-Boot] [PATCH v4] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tetsuyuki Kobayashi
    • [U-Boot] [PATCH v4] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tom Rini
    • [U-Boot] [PATCH v5] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tetsuyuki Kobayashi
    • [U-Boot] [PATCH v5] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tom Rini
    • [U-Boot] [PATCH 0/7 V5] EXYNOS5: Enable I2C support   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock   Simon Glass
    • [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock   Rajeshwari Birje
    • [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock   Rajeshwari Birje
    • [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock   Simon Glass
    • [U-Boot] [PATCH 2/7 V5] EXYNOS: Add I2C base address.   Rajeshwari Shinde
    • [U-Boot] [PATCH 3/7 V5] EXYNOS: PINMUX: Add pinmux support for I2C   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/7 V5] I2C: Move struct s3c24x0_i2c to a common place.   Rajeshwari Shinde
    • [U-Boot] [PATCH 5/7 V5] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Shinde
    • [U-Boot] [PATCH 5/7 V5] I2C: Modify the I2C driver for EXYNOS5   Simon Glass
    • [U-Boot] [PATCH 5/7 V5] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Birje
    • [U-Boot] [PATCH 6/7 V5] I2C: Add support for Multi channel   Rajeshwari Shinde
    • [U-Boot] [PATCH 7/7 V5] CONFIG: SMDK5250: I2C: Enable I2C   Rajeshwari Shinde
    • [U-Boot] [PATCH 7/7 V5] CONFIG: SMDK5250: I2C: Enable I2C   Simon Glass
    • [U-Boot] [PATCH 7/7 V5] CONFIG: SMDK5250: I2C: Enable I2C   Rajeshwari Birje
  • [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Albert ARIBAUD
• [U-Boot] [PATCH] smdk6400: Move smdk6400 board from Makefile to boards.cfg   Zhong Hongbo
• [U-Boot] Please pull u-boot-staging.git/sr at denx.de   Stefan Roese
  • [U-Boot] Please pull u-boot-staging.git/sr at denx.de   Albert ARIBAUD
• [U-Boot] Building U-Boot image with predefined environment   trh178
  • [U-Boot] [PATCH 1/2] kirkwood: implement kw_sdram_bs_set()   Gerlando Falauto
  • [U-Boot] [PATCH 1/2] kirkwood: implement kw_sdram_bs_set()   Marek Vasut
  • [U-Boot] [PATCH 1/2] kirkwood: implement kw_sdram_bs_set()   Gerlando Falauto
  • [U-Boot] [PATCH 1/2] kirkwood: implement kw_sdram_bs_set()   Marek Vasut
  • [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()   Gerlando Falauto
  • [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()   Marek Vasut
  • [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()   Prafulla Wadaskar
  • [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()   Marek Vasut
  • [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()   Holger Brunck
  • [U-Boot] [PATCH v2 2/2] km_arm: enable SDRAM window size fixup   Gerlando Falauto
  • [U-Boot] [PATCH v2 2/2] km_arm: enable SDRAM window size fixup   Prafulla Wadaskar
  • [U-Boot] [PATCH 2/2] km_arm: enable SDRAM window size fixup   Gerlando Falauto
  • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Zhong Hongbo
  • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Andreas Bießmann
  • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Andreas Bießmann
  • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Zhong Hongbo
  • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Zhong Hongbo
  • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Albert ARIBAUD
  • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Zhong Hongbo
  • [U-Boot] [PATCH v3 00/11] updates for Keymile Marvell boards   Holger Brunck
  • [U-Boot] [PATCH v3 02/11] arm/km: add kmcoge5un board support   Holger Brunck
  • [U-Boot] [PATCH v3 08/11] arm/km: skip FPGA config when already configured   Holger Brunck
  • [U-Boot] [PATCH v3 11/11] arm/km: remove calls to kw_gpio_* in board_early_init_f   Holger Brunck
  • [U-Boot] [PATCH v3 00/11] updates for Keymile Marvell boards   Prafulla Wadaskar
  • [U-Boot] [PATCH v3 01/11] arm/km: add kmnusa board support   Holger Brunck
  • [U-Boot] [PATCH v4] arm/km: add kmnusa board support   Holger Brunck
  • [U-Boot] [PATCH v4] arm/km: add kmnusa board support   Prafulla Wadaskar
  • [U-Boot] [PATCH v3 03/11] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
  • [U-Boot] [PATCH v3 04/11] arm/km: remove portl2.h and use km_kirkwood instead   Holger Brunck
  • [U-Boot] [PATCH v3 05/11] arm/km: enable BOCO2 FPGA download support   Holger Brunck
  • [U-Boot] [PATCH v3 06/11] arm/km: cleanup km_kirkwood boards   Holger Brunck
  • [U-Boot] [PATCH v3 07/11] arm/km: redefine piggy 4 reg names to avoid conflicts   Holger Brunck
  • [U-Boot] [PATCH v3 09/11] arm/km: support the 2 PCIe fpga resets   Holger Brunck
  • [U-Boot] [PATCH v3 10/11] arm/km: add implementation for read_dip_switch   Holger Brunck
  • [U-Boot] Please pull u-boot-ti/master   Tom Rini
    • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Fabio Estevam
• [U-Boot] [PATCH v8 2/4] net: use common rand()/srand() functions   Kim Phillips
  • [U-Boot] [PATCH v8 2/4] net: use common rand()/srand() functions   Michael Walle
    • [U-Boot] [PATCH] net: make net_rand.h inclusion depend on BOOTP_RANDOM_DELAY   Kim Phillips
      • [U-Boot] [PATCH] net: make net_rand.h inclusion depend on BOOTP_RANDOM_DELAY   Michael Walle
      • [U-Boot] [PATCH] net: make net_rand.h inclusion depend on BOOTP_RANDOM_DELAY   Wolfgang Denk
      • [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 02/11 v2] u8500: Moving prcmu to cpu directory   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 05/11 v2] snowball: Moving to ux500.v2 addess scheme for PRCMU access   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 11/11 v2] snowball: Adding board specific cache cleanup routine   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop   Troy Kisky
      • [U-Boot] [PATCH V2 03/25] mxc_i2c: create tx_byte function   Troy Kisky
      • [U-Boot] [PATCH V2 12/25] mxc_i2c: don't disable controller after every transaction   Troy Kisky
      • [U-Boot] [PATCH V2 13/25] mxc_i2c: change slave addr if conflicts with destination.   Troy Kisky
      • [U-Boot] [PATCH V2 14/25] mxc_i2c: check for arbitration lost   Troy Kisky
      • [U-Boot] [PATCH V2 15/25] mxc_i2c: add retries   Troy Kisky
      • [U-Boot] [PATCH V2 16/25] mxc_i2c: add i2c_regs argument to i2c_imx_stop   Troy Kisky
      • [U-Boot] [PATCH V2 17/25] mxc_i2c: prep work for multiple busses support   Troy Kisky
      • [U-Boot] [PATCH V2 20/25] iomux-v3: remove include of mx6x_pins.h   Troy Kisky
      • [U-Boot] [PATCH V2 21/25] i.mx: iomux-v3.h: move to imx-common include directory   Troy Kisky
      • [U-Boot] [PATCH V2 22/25] i.mx: iomux-v3.c: move to imx-common directory   Troy Kisky
      • [U-Boot] [PATCH V2 23/25] i.mx53: add definition for I2C3_BASE_ADDR   Troy Kisky
      • [U-Boot] [PATCH V2 24/25] imx-common: add i2c.c for bus recovery support   Troy Kisky
      • [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop   Troy Kisky
      • [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop   Marek Vasut
      • [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop   Troy Kisky
      • [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop   Marek Vasut
      • [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop   Troy Kisky
      • [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop   Marek Vasut
      • [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop   Marek Vasut
      • [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop   Troy Kisky
      • [U-Boot] [PATCH V2 02/25] mxc_i2c: remove ifdef of CONFIG_HARD_I2C   Troy Kisky
      • [U-Boot] [PATCH V2 04/25] mxc_i2c: clear i2sr before waiting for bit   Troy Kisky
      • [U-Boot] [PATCH V2 05/25] mxc_i2c: create i2c_init_transfer   Troy Kisky
      • [U-Boot] [PATCH V2 06/25] mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write   Troy Kisky
      • [U-Boot] [PATCH V2 07/25] mxc_i2c.c: code i2c_probe as a 0 length i2c_write   Troy Kisky
      • [U-Boot] [PATCH V2 08/25] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state   Troy Kisky
      • [U-Boot] [PATCH V2 09/25] mxc_i2c: remove redundant read   Troy Kisky
      • [U-Boot] [PATCH V2 10/25] mxc_i2c: place imx_start code inline   Troy Kisky
      • [U-Boot] [PATCH V2 11/25] mxc_i2c: place i2c_reset code inline   Troy Kisky
      • [U-Boot] [PATCH V2 18/25] mxc_i2c: add bus recovery support   Troy Kisky
      • [U-Boot] [PATCH V2 19/25] mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support   Troy Kisky
      • [U-Boot] [PATCH V2 25/25] mx6qsabrelite: add i2c multi-bus support   Troy Kisky
      • [U-Boot] [PATCH 1/2] phylib: phy_startup() should return an error code on failure   Timur Tabi
      • [U-Boot] [PATCH 2/2] net: abort network initialization if the PHY driver fails   Timur Tabi
      • [U-Boot] [PATCH 2/2] net: abort network initialization if the PHY driver fails   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH 2/2] net: abort network initialization if the PHY driver fails   Tabi Timur-B04825
      • [U-Boot] [PATCH 1/2] phylib: phy_startup() should return an error code on failure   Joe Hershberger
      • [U-Boot] [PATCH v3] arm: rmobile: Add supoprt for KMC KZM-A9-GT board   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] arm: rmobile: Support build with gcc-4.6 or later   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] arm: rmobile: Support build with gcc-4.6 or later   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH] arm: rmobile: Support build with gcc-4.6 or later   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] rmobile: kzm9g: Fix warnin in cmp_loop function   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] rmobile: kzm9g: Fix warnin in cmp_loop function   Albert ARIBAUD
      • [U-Boot] [PATCH] rmobile: kzm9g: Fix warnin in cmp_loop function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver   Scott Wood
  • [U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver   Stephen Warren
    • [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support   Bo Shen
    • [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support   Bo Shen
• [U-Boot] Please pull u-boot-staging.git/sr at denx.de   Stefan Roese
  • [U-Boot] Please pull u-boot-staging.git/sr at denx.de   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Yann Vernier
  • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Andreas Bießmann
    • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Yann Vernier
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Andreas Bießmann
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Albert ARIBAUD
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Greg Ungerer
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Andreas Bießmann
      • [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init   Andreas Bießmann
      • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Zhong Hongbo
      • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Andreas Bießmann
      • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Zhong Hongbo
      • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Andreas Bießmann
      • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Zhong Hongbo
      • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Albert ARIBAUD
      • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Zhong Hongbo
• [U-Boot] RMLL/LSM 2012 - U-Boot Developer's Meeting   Wolfgang Denk
  • [U-Boot] RMLL/LSM 2012 - U-Boot Developer's Meeting   Albert ARIBAUD
  • [U-Boot] RMLL/LSM 2012 - U-Boot Developer's Meeting   Marek Vasut
• [U-Boot] [PATCH] fs/ext2/ext2fs.c: fix warning   Jason Cooper
  • [U-Boot] [PATCH] powerpc/85xx: improve definition of BR_PHYS_ADDR macro   Timur Tabi
  • [U-Boot] [PATCH] powerpc/85xx: remove support for the Freescale P3060   Timur Tabi
  • [U-Boot] [PATCH 0/7] tegra20: enable thumb   Allen Martin
  • [U-Boot] [PATCH 3/7] tegra20: enable thumb build   Allen Martin
  • [U-Boot] [PATCH 3/7] tegra20: enable thumb build   Stephen Warren
  • [U-Boot] [PATCH 3/7] tegra20: enable thumb build   Allen Martin
  • [U-Boot] [PATCH 5/7] arm: add thumb compatible return instructions   Allen Martin
  • [U-Boot] [PATCH 1/7] tegra20: remove inline assembly for u32 cast   Allen Martin
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Allen Martin
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Stephen Warren
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Allen Martin
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Stephen Warren
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Allen Martin
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Allen Martin
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Allen Martin
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Albert ARIBAUD
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Allen Martin
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Allen Martin
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Graeme Russ
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Albert ARIBAUD
  • [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb   Allen Martin
  • [U-Boot] [PATCH 4/7] arm: add _thumb1_case_uqi to libgcc   Allen Martin
  • [U-Boot] [PATCH 6/7] arm: use thumb compatible return in arm720t   Allen Martin
  • [U-Boot] [PATCH 7/7] arm: change arm720t to armv4t   Allen Martin
  • [PATCH 1/1] efikmx: quick hack for testing i2c changes   Troy Kisky
    • [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails   Timur Tabi
    • [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails   Timur Tabi
    • [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails   Stephan Linz
    • [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails   Marek Vasut
    • [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
    • [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Marek Vasut
  • [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Aneesh V
  • [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Marek Vasut
  • [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2   Albert ARIBAUD
• [U-Boot] [PATCH 8/9] CACHE: net: asix: Fix asix driver to work with data cache on   Marek Vasut
  • [U-Boot] [PATCH 8/9] CACHE: net: asix: Fix asix driver to work with data cache on   Marek Vasut
• [U-Boot] [PATCH 2/9] CACHE: Add cache_aligned() macro   Aneesh V
• [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Aneesh V
  • [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode   Marek Vasut
  • [U-Boot] [PATCH 2/4] MX28: Split out the PIO and DMA transfer functions   Marek Vasut
  • [U-Boot] [PATCH 3/4] MX28: Transfer small blocks via PIO in MXS MMC   Marek Vasut
  • [U-Boot] [PATCH 4/4] MX28: Fix MXS MMC DMA issues   Marek Vasut
• [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Andreas Bießmann
  • [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space   Zhong Hongbo
    • [U-Boot] [V3] arm: Fix to mistake clean the memory space   Zhong Hongbo
    • [U-Boot] [V3] arm: Fix to mistake clean the memory space   Albert ARIBAUD
    • [U-Boot] [V3] arm: Fix to mistake clean the memory space   Zhong Hongbo
    • [U-Boot] [V3] arm: Fix to mistake clean the memory space   Andreas Bießmann
    • [U-Boot] [V3] arm: Fix to mistake clean the memory space   Albert ARIBAUD
    • [U-Boot] [V3] arm: Fix to mistake clean the memory space   Andreas Bießmann
    • [U-Boot] S3c64xx: Switch all I/O to use readl/writel function   Zhong Hongbo
    • [U-Boot] [PATCH 01/13] smdk6400: Move smdk6400 board from Makefile to boards.cfg   Zhong Hongbo
    • [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash   Zhong Hongbo
    • [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash   Scott Wood
    • [U-Boot] [PATCH 03/13] S3C64XX: Use readl/writel to operate uart   Zhong Hongbo
    • [U-Boot] [PATCH 04/13] S3C64XX: add pwm for s3c64xx support   Zhong Hongbo
    • [U-Boot] [PATCH 05/13] S3C64XX: reference s5p cpu time system for s3c64xx timer   Zhong Hongbo
    • [U-Boot] [PATCH 06/13] S3C64xx: mov cpu_init.S to the board directory   Zhong Hongbo
    • [U-Boot] [PATCH 07/13] S3C6400: Delete nand_spl for S3C6400   Zhong Hongbo
    • [U-Boot] [PATCH 07/13] S3C6400: Delete nand_spl for S3C6400   Scott Wood
    • [U-Boot] [PATCH 08/13] S3C6400: Adopt SPL framwork to support spl for nand flash   Zhong Hongbo
    • [U-Boot] [PATCH 09/13] S3C64XX: Change SROM init to use read/write operation   Zhong Hongbo
    • [U-Boot] [PATCH 10/13] S3C64XX: Switch to use read/writel to operation clock system   Zhong Hongbo
    • [U-Boot] [PATCH 11/13] S3c64xx: clear GPIO, Interrupt, Watchdog flag.   Zhong Hongbo
    • [U-Boot] [PATCH 12/13] S3C6400: clear memory init variable   Zhong Hongbo
    • [U-Boot] [PATCH 13/13] S3C6400: Clear system clock variable   Zhong Hongbo
    • [U-Boot] S3c64xx: Switch all I/O to use readl/writel function   Zhong Hongbo
• [U-Boot] [PATCH V2] add new board vl_ma2sc   Albert ARIBAUD
• [U-Boot] [PATCH 2/3] ARM: mx6: Remove CONFIG_ARCH_CPU_INIT   Albert ARIBAUD
• [U-Boot] [PATCH 3/3] ARM: mx28: Remove CONFIG_ARCH_CPU_INIT   Albert ARIBAUD
  • [U-Boot] [PATCH 3/3] ARM: mx28: Remove CONFIG_ARCH_CPU_INIT   Marek Vasut
• [U-Boot] [PATCH] PXA: Enable CONFIG_PREBOOT on zipitz2   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r()   Albert ARIBAUD
• [U-Boot] [PATCH 1/5] ARM: cache: Move the cp15 CR register read before flushing the cache.   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
    • [U-Boot] [V4] arm: Fix to mistake clean the memory space   Zhong Hongbo
    • [U-Boot] [V4] arm: Fix to mistake clean the memory space   Andreas Bießmann
    • [U-Boot] [V4] arm: Fix to mistake clean the memory space   Albert ARIBAUD
  • [U-Boot] [PATCH v3] doc: README.mx28_common: Add missing entry into Contents   Fabio Estevam
    • [U-Boot] [PATCH v3] doc: README.mx28_common: Add missing entry into Contents   Stefano Babic
• [U-Boot] [PATCH v2] mx28: Fix elftosb source link in README.mx28_common   Stefano Babic
• [U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet   Stefano Babic
  • [U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet   Dirk Behme
    • [U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet   Stefano Babic
• [U-Boot] [PATCH 5/5] [PATCH 5/5] Add config file for the apf27   Stefano Babic
• [U-Boot] [PATCH 3/5] [PATCH 3/5] Add nand_spl support for the apf27   Stefano Babic
• [U-Boot] [PATCH 4/5] [PATCH 4/5] Add FPGA support for the apf27 board   Stefano Babic
• [U-Boot] [PATCH 2/5] [PATCH 2/5] Add support for the armadeus APF27 board   Stefano Babic
  • [U-Boot] [PATCH] tools: Fix mingw tools build   Vladimir Yakovlev
  • [U-Boot] [PATCH] tools: Fix mingw tools build   Wolfgang Denk
  • [U-Boot] [PATCH] tools: Fix mingw tools build   Mike Frysinger
  • [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Marek Vasut
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Tom Rini
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
  • [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
  • [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Ilya Yanok
  • [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Marek Vasut
  • [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Mike Frysinger
  • [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Marek Vasut
  • [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Mike Frysinger
  • [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Tom Rini
  • [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Mike Frysinger
  • [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Tom Rini
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Ilya Yanok
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Marek Vasut
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Ilya Yanok
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Marek Vasut
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Ilya Yanok
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Marek Vasut
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Ilya Yanok
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Marek Vasut
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Ilya Yanok
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Marek Vasut
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Ilya Yanok
  • [U-Boot] [PATCH] smsc95xx: align buffers to cache line size   Marek Vasut
• [U-Boot] Compiling Uboot error：too many arguments   Zhang Heron
  • [U-Boot] Compiling Uboot error：too many arguments   Wolfgang Denk
    • [U-Boot] Compiling Uboot error：too many arguments   Marek Vasut
• [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code   Marek Vasut
  • [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code   Fabio Estevam
• [U-Boot] [PATCH] net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000   Wolfgang Denk
  • [U-Boot] [PATCH] net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH] net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000   Joe Hershberger
• [U-Boot] [PATCH] Remove remaining mdelay() macros   Wolfgang Denk
• [U-Boot] [PATCH v9 2/4] net: use common rand()/srand() functions   Wolfgang Denk
  • [U-Boot] [PATCH v9 2/4] net: use common rand()/srand() functions   Michael Walle
    • [U-Boot] [PATCH v9 2/4] net: use common rand()/srand() functions   Wolfgang Denk
• [U-Boot] [STATUS] ARM - many build problems   Wolfgang Denk
  • [U-Boot] [STATUS] ARM - many build problems   Tetsuyuki Kobayashi
    • [U-Boot] [STATUS] ARM - many build problems   Thierry Reding
    • [U-Boot] [STATUS] ARM - many build problems   Wolfgang Denk
    • [U-Boot] [PATCH 1/3] MX28: SPI: Refactor spi_xfer a bit   Marek Vasut
    • [U-Boot] [PATCH 2/3] MX28: SPI: Pull out the PIO transfer function   Marek Vasut
    • [U-Boot] [PATCH 3/3] MX28: SPI: Add DMA transfer support   Marek Vasut
    • [U-Boot] [PATCH 1/3] MX28: SPI: Refactor spi_xfer a bit   Stefano Babic
    • [U-Boot] [PATCH 1/3] MX28: SPI: Refactor spi_xfer a bit   Marek Vasut
    • [U-Boot] [PATCH V2 1/8] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138   Mikhail Kshevetskiy
    • [U-Boot] [PATCH V2 2/8] arm/davinci/da850: add uart0 pinmux   Mikhail Kshevetskiy
    • [U-Boot] [PATCH V2 3/8] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX   Mikhail Kshevetskiy
    • [U-Boot] [PATCH V2 4/8] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case   Mikhail Kshevetskiy
    • [U-Boot] [PATCH V2 5/8] mtd/spi: add sst25l driver   Mikhail Kshevetskiy
    • [U-Boot] [PATCH V2 6/8] MMC: u-boot-spl may be compiled without partition support   Mikhail Kshevetskiy
    • [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection   Mikhail Kshevetskiy
    • [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection   Prabhakar Lad
    • [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection   Mikhail Kshevetskiy
    • [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection   Prabhakar Lad
    • [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection   Tom Rini
    • [U-Boot] [PATCH V2 8/8] arm/davinci: spl - add compressed u-boot image support   Mikhail Kshevetskiy
• [U-Boot] [PATCH] fdt: send all dtc output to stderr   Wolfgang Denk
• [U-Boot] [PATCH v2 0/4] Board support and feature for LaCie devices   Simon Guinot
  • [U-Boot] [PATCH 1/5] microblaze: Add gpio.h   Michal Simek
• [U-Boot] [PATCH 2/5] microblaze: Move individual board linker scripts to common script in cpu tree.   Michal Simek
• [U-Boot] [PATCH 3/5] microblaze: Add support for device tree driven board configuration   Michal Simek
  • [U-Boot] [PATCH 01/12] microblaze: board: Remove compilation warning   Michal Simek
  • [U-Boot] [PATCH 02/12] microblaze: Remove extern from board.c   Michal Simek
  • [U-Boot] [PATCH 02/12] microblaze: Remove extern from board.c   Simon Glass
  • [U-Boot] [PATCH 02/12] microblaze: Remove extern from board.c   Michal Simek
  • [U-Boot] [PATCH 03/12] microblaze: intc: Clear interrupt code   Michal Simek
  • [U-Boot] [PATCH 03/12] microblaze: intc: Clear interrupt code   Simon Glass
  • [U-Boot] [PATCH 03/12] microblaze: intc: Clear interrupt code   Michal Simek
  • [U-Boot] [PATCH 04/12] microblaze: intc: Registering interrupt should return value   Michal Simek
  • [U-Boot] [PATCH 04/12] microblaze: intc: Registering interrupt should return value   Simon Glass
  • [U-Boot] [PATCH 04/12] microblaze: intc: Registering interrupt should return value   Michal Simek
  • [U-Boot] [PATCH 05/12] microblaze: intc: Coding style cleanup   Michal Simek
  • [U-Boot] [PATCH 05/12] microblaze: intc: Coding style cleanup   Simon Glass
  • [U-Boot] [PATCH 05/12] microblaze: intc: Coding style cleanup   Michal Simek
  • [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration   Michal Simek
  • [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration   Simon Glass
  • [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration   Michal Simek
  • [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration   Simon Glass
  • [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration   Michal Simek
  • [U-Boot] [PATCH 07/12] microblaze: Move __udelay implementation   Michal Simek
  • [U-Boot] [PATCH 07/12] microblaze: Move __udelay implementation   Simon Glass
  • [U-Boot] [PATCH 07/12] microblaze: Move __udelay implementation   Michal Simek
  • [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization   Michal Simek
  • [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization   Stephan Linz
  • [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization   Michal Simek
  • [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization   Stephan Linz
  • [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization   Michal Simek
  • [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization   Stephan Linz
  • [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization   Michal Simek
  • [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration   Michal Simek
  • [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration   Stephan Linz
  • [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration   Simon Glass
  • [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration   Michal Simek
  • [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration   Michal Simek
  • [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration   Simon Glass
  • [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration   Michal Simek
  • [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration   Simon Glass
  • [U-Boot] [PATCH 10/12] microblaze: Call serial multi initialization   Michal Simek
  • [U-Boot] [PATCH 10/12] microblaze: Call serial multi initialization   Simon Glass
  • [U-Boot] [PATCH 10/12] microblaze: Call serial multi initialization   Michal Simek
  • [U-Boot] [PATCH 11/12] microblaze: Clean microblaze initialization   Michal Simek
  • [U-Boot] [PATCH 12/12] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE   Michal Simek
  • [U-Boot] [PATCH 01/12] microblaze: board: Remove compilation warning   Simon Glass
  • [U-Boot] [PATCH 01/12] microblaze: board: Remove compilation warning   Michal Simek
  • [U-Boot] [PATCH 1/3 V2] MX28: SPI: Refactor spi_xfer a bit   Marek Vasut
  • [U-Boot] [PATCH 2/3 RESEND] MX28: SPI: Pull out the PIO transfer function   Marek Vasut
  • [U-Boot] [PATCH 2/3 RESEND] MX28: SPI: Pull out the PIO transfer function   Stefano Babic
  • [U-Boot] [PATCH 3/3 V2] MX28: SPI: Add DMA transfer support   Marek Vasut
  • [U-Boot] [PATCH 3/3 V2] MX28: SPI: Add DMA transfer support   Stefano Babic
  • [U-Boot] [PATCH 1/3 V2] MX28: SPI: Refactor spi_xfer a bit   Stefano Babic
  • [U-Boot] [PATCH v3 1/6] arm: rmobile: kzm9g: Modify sdram area   Tetsuyuki Kobayshi
• [U-Boot] [PATCH 1/2] at91sam9263ek: enable useful commands   Andreas Bießmann
  • [U-Boot] [PATCH] davinci: reduce pimux_config size by storing register id instead of address   Tom Rini
    • [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit   Veli-Pekka Peltola
    • [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit   Lauri Hintsala
    • [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit   Stefano Babic
    • [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit   Lauri Hintsala
    • [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit   Stefano Babic
  • [U-Boot] [ARM] one warning left for all ARM boards   Albert ARIBAUD
    • [U-Boot] [ARM] one warning left for all ARM boards   Wolfgang Denk
      • [U-Boot] [ARM] one warning left for all ARM boards   Tom Rini
      • [U-Boot] [ARM] one warning left for all ARM boards   Albert ARIBAUD
      • [U-Boot] [ARM] one warning left for all ARM boards   Tom Rini
      • [U-Boot] [ARM] one warning left for all ARM boards   Albert ARIBAUD
      • [U-Boot] [ARM] one warning left for all ARM boards   Marek Vasut
      • [U-Boot] [ARM] one warning left for all ARM boards   Tom Rini
      • [U-Boot] [ARM] one warning left for all ARM boards   Ilya Yanok
      • [U-Boot] [ARM] one warning left for all ARM boards   Tom Rini
  • [U-Boot] random errors in kernel or rootfs;u-boot check sum   Anthony Garland
    • [U-Boot] random errors in kernel or rootfs;u-boot check sum   Wolfgang Denk
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Wolfgang Denk
    • [U-Boot] [PULL] u-boot-usb/master   Wolfgang Denk
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
  • [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
  • [U-Boot] Please pull u-boot-ti/master   Tom Rini
    • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
  • [U-Boot] Please pull u-boot-ti/next   Tom Rini
    • [U-Boot] Please pull u-boot-ti/next   Albert ARIBAUD
      • [U-Boot] [PATCH V3 1/3] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 2/3] arm/davinci/da850: add uart0 pinmux   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 2/3] arm/davinci/da850: add uart0 pinmux   Sughosh Ganu
      • [U-Boot] [PATCH V3 3/3] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 3/3] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX   Sughosh Ganu
      • [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails   Timur Tabi
      • [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails   Marek Vasut
      • [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails   Joe Hershberger
      • [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails   Timur Tabi
      • [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails   Joe Hershberger
      • [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails   Timur Tabi
      • [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails   Joe Hershberger
      • [U-Boot] [PATCH V3 1/2] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 2/2] mtd/spi: add sst25l driver   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 2/2] mtd/spi: add sst25l driver   Mike Frysinger
      • [U-Boot] [PATCH V3 1/2] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case   Mike Frysinger
      • [U-Boot] [PATCH V3 1/3] MMC: u-boot-spl may be compiled without partition support   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Tom Rini
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Sughosh Ganu
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Sughosh Ganu
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Tom Rini
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Sughosh Ganu
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Tom Rini
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Sughosh Ganu
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Tom Rini
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Sughosh Ganu
      • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Tom Rini
      • [U-Boot] [PATCH V3 3/3] arm/davinci: spl - add compressed u-boot image support   Mikhail Kshevetskiy
      • [U-Boot] [PATCH V3 3/3] arm/davinci: spl - add compressed u-boot image support   Sughosh Ganu
      • [U-Boot] [PATCH V3 3/3] arm/davinci: spl - add compressed u-boot image support   Mikhail Kshevetskiy
• [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Fabio Estevam
  • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Hornung, Michael
    • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Fabio Estevam
      • [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash   Michael Hornung
• [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Marek Vasut
    • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Stefan Herbrechtsmeier
      • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Marek Vasut
• [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Tom Rini
  • [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection   Mikhail Kshevetskiy
• [U-Boot] [PATCH] Add support for DS1388.   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] tools, config.mk: add binutils-version   Allen Martin
  • [U-Boot] [PATCH 2/2] arm: work around assembler bug   Allen Martin
  • [U-Boot] [PATCH 2/2] arm: work around assembler bug   Graeme Russ
  • [U-Boot] [PATCH 2/2] arm: work around assembler bug   Albert ARIBAUD
  • [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning   Rajeshwari Shinde
  • [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning   Marek Vasut
  • [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning   Jaehoon Chung
  • [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning   Rajeshwari Birje
  • [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] [PATCH v2] Consolidate bootcount code into drivers/bootcount   Wolfgang Denk
• [U-Boot] [PATCH] ARM: EXYNOS: fixed compiler warning message   Jaehoon Chung
  • [U-Boot] [PATCH] ARM: EXYNOS: fixed compiler warning message   Rajeshwari Birje
    • [U-Boot] [PATCH] ARM: EXYNOS: fixed compiler warning message   Minkyu Kang
• [U-Boot] [STATUS] v2012.07-rc1 is out - release date July 23   Wolfgang Denk
  • [U-Boot] [STATUS] v2012.07-rc1 is out - release date July 23   Marek Vasut
    • [U-Boot] [STATUS] v2012.07-rc1 is out - release date July 23   Jens Scharsig
  • [U-Boot] [STATUS] v2012.07-rc1 is out - release date July 23   Michael Walle
• [U-Boot] [PATCH] i2c: deblock i2c bus also if accessed before realocation   Holger Brunck
  • [U-Boot] [PATCH] i2c: deblock i2c bus also if accessed before realocation   Heiko Schocher
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Michal Simek
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Simon Glass
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Michal Simek
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Simon Glass
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Michal Simek
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Simon Glass
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Michal Simek
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Simon Glass
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Michal Simek
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Joe Hershberger
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Simon Glass
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Michal Simek
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Simon Glass
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Joe Hershberger
    • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Michal Simek
• [U-Boot] FDT driver initialization function declaration   Michal Simek
  • [U-Boot] FDT driver initialization function declaration   Wolfgang Denk
    • [U-Boot] FDT driver initialization function declaration   Michal Simek
      • [U-Boot] FDT driver initialization function declaration   Marek Vasut
      • [U-Boot] FDT driver initialization function declaration   Michal Simek
      • [U-Boot] FDT driver initialization function declaration   Wolfgang Denk
      • [U-Boot] FDT driver initialization function declaration   Marek Vasut
      • [U-Boot] FDT driver initialization function declaration   Michal Simek
      • [U-Boot] FDT driver initialization function declaration   Marek Vasut
      • [U-Boot] FDT driver initialization function declaration   Michal Simek
      • [U-Boot] FDT driver initialization function declaration   Michal Simek
      • [U-Boot] [U-Boot-DM] FDT driver initialization function declaration   Pavel Herrmann
      • [U-Boot] FDT driver initialization function declaration   Michal Simek
      • [U-Boot] FDT driver initialization function declaration   Marek Vasut
      • [U-Boot] FDT driver initialization function declaration   Michal Simek
      • [U-Boot] FDT driver initialization function declaration   Marek Vasut
  • [U-Boot] FDT driver initialization function declaration   Marek Vasut
    • [U-Boot] FDT driver initialization function declaration   Simon Glass
      • [U-Boot] [U-Boot-DM] FDT driver initialization function declaration   Marek Vasut
    • [U-Boot] FDT driver initialization function declaration   Wolfgang Denk
  • [U-Boot] FDT driver initialization function declaration   Simon Glass
    • [U-Boot] FDT driver initialization function declaration   Michal Simek
      • [U-Boot] FDT driver initialization function declaration   Simon Glass
      • [U-Boot] [PATCH] net: fix typo in arp clean up   Mike Frysinger
      • [U-Boot] [PATCH] net: fix typo in arp clean up   Joe Hershberger
• [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash   Zhong Hongbo
  • [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash   Scott Wood
    • [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash   Zhong Hongbo
• [U-Boot] Dreamplug v10 uboot   Steven McGrath
  • [U-Boot] Dreamplug v10 uboot   Luka Perkov
    • [U-Boot] Dreamplug v10 uboot   Steven McGrath
    • [U-Boot] Dreamplug v10 uboot   Steven McGrath
      • [U-Boot] Dreamplug v10 uboot   Prafulla Wadaskar
    • [U-Boot] Dreamplug v10 uboot   Steven McGrath
      • [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3   Peter Meerwald
      • [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3   Tom Rini
      • [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3   Peter Meerwald
      • [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3   Albert ARIBAUD
      • [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3   Tom Rini
      • [U-Boot] [PATCH v2 1/2] tools, config.mk: add binutils-version   Allen Martin
      • [U-Boot] [PATCH v2 2/2] arm: work around assembler bug   Allen Martin
      • [U-Boot] [PATCH v2 2/2] arm: work around assembler bug   Tom Rini
      • [U-Boot] [PATCH v2 2/2] arm: work around assembler bug   Allen Martin
      • [U-Boot] [PATCH v2 2/2] arm: work around assembler bug   Tom Rini
      • [U-Boot] [PATCH v2 2/2] arm: work around assembler bug   Allen Martin
      • [U-Boot] [PATCH v2 2/2] arm: work around assembler bug   Tom Rini
• [U-Boot] [PATCH v3] usb_storage: fix ehci driver max transfer size   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Marek Vasut
    • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Ilya Yanok
      • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Marek Vasut
      • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Ilya Yanok
      • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Marek Vasut
      • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Ilya Yanok
  • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Marek Vasut
  • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Marek Vasut
    • [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size   Stefan Herbrechtsmeier
• [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block   Joe Hershberger
  • [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block   Wolfgang Denk
    • [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block   Joe Hershberger
      • [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block   Wolfgang Denk
• [U-Boot] Pull request: u-boot-net/master   Joe Hershberger
  • [U-Boot] Pull request: u-boot-net/master   Wolfgang Denk
    • [U-Boot] [PATCH v3 1/2] tools, config.mk: add binutils-version   Allen Martin
    • [U-Boot] [PATCH v3 2/2] arm: work around assembler bug   Allen Martin
    • [U-Boot] [PATCH v4] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS   Andy Fleming
    • [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Joe Hershberger
      • [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Marek Vasut
• [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible   Troy Kisky
  • [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible   Dirk Behme
    • [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible   Prafulla Wadaskar
    • [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible   Joe Hershberger
    • [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible   Troy Kisky
• [U-Boot] [PATCH v2 06/19] tegra: Add display support to funcmux   Simon Glass
  • [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
    • [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra   Thierry Reding
    • [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
    • [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra   Thierry Reding
    • [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra   Alex Courbot
• [U-Boot] [PATCH v2 08/19] tegra: Add support for PWFM   Simon Glass
• [U-Boot] [PATCH v2 10/19] tegra: Add LCD driver   Simon Glass
  • [U-Boot] [PATCH v2 11/19] tegra: Add LCD support to Nvidia boards   Simon Glass
    • [U-Boot] [PATCH v2 11/19] tegra: Add LCD support to Nvidia boards   Stephen Warren
  • [U-Boot] [PATCH v2 12/19] arm: Add control over cachability of memory regions   Simon Glass
  • [U-Boot] [PATCH v2 14/19] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
• [U-Boot] [PATCH v2 03/19] fdt: Add function to look up a phandle's register address   Simon Glass
  • [U-Boot] [PATCH v2 09/19] tegra: Add SOC support for display/lcd   Simon Glass
• [U-Boot] [PATCH] mx6qsabresd: Add basic support   Dirk Behme
  • [U-Boot] [PATCH] mx6qsabresd: Add basic support   Fabio Estevam
• [U-Boot] [PATCH 1/3] mxc_i2c: specify i2c base address in config file   Dirk Behme
  • [U-Boot] [PATCH 1/3] mxc_i2c: specify i2c base address in config file   Heiko Schocher
• [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Dirk Behme
  • [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Marek Vasut
    • [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Wolfgang Denk
      • [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Marek Vasut
    • [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start   Stefano Babic
• [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Dirk Behme
  • [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Marek Vasut
  • [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Marek Vasut
    • [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Dirk Behme
      • [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Stefano Babic
• [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Dirk Behme
  • [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Troy Kisky
    • [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Dirk Behme
• [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Wolfgang Denk
  • [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Joe Hershberger
    • [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Tom Warren
    • [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Joe Hershberger
    • [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Wolfgang Denk
    • [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Stephen Warren
  • [U-Boot] [PATCH 1/2 v2] SDHC/MMC: fix the wrong infomation after change SD card   Huang Changming-R66093
    • [U-Boot] [PATCH 1/2 v2] SDHC/MMC: fix the wrong infomation after change SD card   Andy Fleming
    • [U-Boot] [PATCH 1/2 v2] SDHC/MMC: fix the wrong infomation after change SD card   Marek Vasut
    • [U-Boot] [PATCH 1/2 v2] SDHC/MMC: fix the wrong infomation after change SD card   Huang Changming-R66093
  • [U-Boot] [PATCH 2/2 v3] FSL/eSDHC: enable the clock to detect the SD card   Huang Changming-R66093
    • [U-Boot] [PATCH 2/2 v3] FSL/eSDHC: enable the clock to detect the SD card   Marek Vasut
  • [U-Boot] [PATCH] SD/MMC: check the card status during erase operation   Huang Changming-R66093
• [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [i2c] Pull request   Wolfgang Denk
    • [U-Boot] [PATCH v2 0/19] tegra: Add display driver and LCD support for Seaboard   Simon Glass
• [U-Boot] [PATCH] ARM: EXYNOS: fixed the wrong function argument.   Jaehoon Chung
  • [U-Boot] [PATCH] ARM: EXYNOS: fixed the wrong function argument.   Minkyu Kang
• [U-Boot] u-boot-2011.12 QorIQ P1013 + XIO2001 PCIE-PCI Bridge   BRUNMAYR Peter
  • [U-Boot] [PATCH] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h   Michal Simek
  • [U-Boot] [PATCH] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h   Michal Simek
  • [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h   Michal Simek
  • [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h   Mike Frysinger
• [U-Boot] Ethernet on PandaBoard   Gary Thomas
  • [U-Boot] Ethernet on PandaBoard   Tetsuyuki Kobayashi
  • [U-Boot] Ethernet on PandaBoard   Gary Thomas
    • [U-Boot] Ethernet on PandaBoard   Tetsuyuki Kobayashi
    • [U-Boot] Ethernet on PandaBoard   Gary Thomas
    • [U-Boot] Ethernet on PandaBoard   Tom Rini
      • [U-Boot] Ethernet on PandaBoard   Tom Rini
      • [U-Boot] Ethernet on PandaBoard   Gary Thomas
      • [U-Boot] Ethernet on PandaBoard   Tom Rini
      • [U-Boot] Ethernet on PandaBoard   Gary Thomas
      • [U-Boot] Ethernet on PandaBoard   Tom Rini
      • [U-Boot] Ethernet on PandaBoard   Gary Thomas
      • [U-Boot] Ethernet on PandaBoard   Gary Thomas
      • [U-Boot] Ethernet on PandaBoard   Tom Rini
      • [U-Boot] Ethernet on PandaBoard   Gary Thomas
    • [U-Boot] [PATCH v2] net/designware: Consecutive writes to the same register to be avoided   Joe Hershberger
  • [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block   Joe Hershberger
  • [U-Boot] [PATCH v5] net: allow setting env enetaddr from net device setting   Joe Hershberger
• [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git next   Joe Hershberger
  • [U-Boot] Pull request: u-boot-net.git next   Wolfgang Denk
• [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible   Joe Hershberger
  • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Markus Hubig
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Wolfgang Denk
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Markus Hubig
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Andreas Bießmann
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Markus Hubig
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Andreas Bießmann
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Markus Hubig
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Markus Hubig
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Markus Hubig
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Wolfgang Denk
    • [U-Boot] Need help to get u-boot running on the taskit stamp9g20   Markus Hubig
    • [U-Boot] [SOLVED] Need help to get u-boot running on the taskit stamp9g20   Markus Hubig
• [U-Boot] [PATCH v2 0/2] GPIO driver for BCM2835 SoC   Vikram Narayanan
  • [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver   Vikram Narayanan
    • [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver   Stephen Warren
      • [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver   Vikram Narayanan
      • [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver   Stephen Warren
      • [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver   Vikram Narayanan
  • [U-Boot] [PATCH v2 2/2] rbpi: Add BCM2835 GPIO driver for raspberry pi   Vikram Narayanan
• [U-Boot] [PATCH v4] Correct corrupted NAND Flash access on KARO TX25 modules   Gachet Daniel
  • [U-Boot] [PATCH v4] Correct corrupted NAND Flash access on KARO TX25 modules   Wolfgang Denk
• [U-Boot] [PATCH v4] Correct corrupted NAND Flash access on KARO TX25 modules   Gachet Daniel
• [U-Boot] [U-Boot-DM] FDT driver initialization function declaration   Michal Simek
  • [U-Boot] [U-Boot-DM] FDT driver initialization function declaration   Tomas Hlavacek
    • [U-Boot] [PATCH] powerpc/sgmii: To support PHY link state auto detect in SGMII mode   Jia Hongtao
    • [U-Boot] [PATCH] powerpc/sgmii: To support PHY link state auto detect in SGMII mode   Jia Hongtao-B38951
    • [U-Boot] [PATCH] dts/Makefile: Check for empty $(LDSCRIPT)   Horst Kronstorfer
    • [U-Boot] [PATCH v3 0/18] tegra: Add display driver and LCD support for Seaboard   Simon Glass
    • [U-Boot] [PATCH v3 01/18] fdt: Tidy debugging, add to fdtdec_get_int/addr()   Simon Glass
    • [U-Boot] [PATCH v3 02/18] fdt: Add header guard to fdtdec.h   Simon Glass
    • [U-Boot] [PATCH v3 02/18] fdt: Add header guard to fdtdec.h   Mike Frysinger
    • [U-Boot] [PATCH v3 03/18] tegra: Use const for pinmux_config_pingroup/table()   Simon Glass
    • [U-Boot] [PATCH v3 03/18] tegra: Use const for pinmux_config_pingroup/table()   Mike Frysinger
    • [U-Boot] [PATCH v3 04/18] tegra: Add display support to funcmux   Simon Glass
    • [U-Boot] [PATCH v3 04/18] tegra: Add display support to funcmux   Mike Frysinger
    • [U-Boot] [PATCH v3 05/18] tegra: fdt: Add pwm binding and node   Simon Glass
    • [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
    • [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
    • [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra   Thierry Reding
    • [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra   Stephen Warren
    • [U-Boot] [PATCH v3 07/18] tegra: Add support for PWM   Simon Glass
    • [U-Boot] [PATCH v3 07/18] tegra: Add support for PWM   Mike Frysinger
    • [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd   Simon Glass
    • [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd   Thierry Reding
    • [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd   Adam Jiang
    • [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd   Thierry Reding
    • [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd   Adam Jiang
    • [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd   Mike Frysinger
    • [U-Boot] [PATCH v3 09/18] tegra: Add LCD driver   Simon Glass
    • [U-Boot] [PATCH v3 09/18] tegra: Add LCD driver   Thierry Reding
    • [U-Boot] [PATCH v3 10/18] tegra: Add LCD support to Nvidia boards   Simon Glass
    • [U-Boot] [PATCH v3 11/18] arm: Add control over cachability of memory regions   Simon Glass
    • [U-Boot] [PATCH v3 11/18] arm: Add control over cachability of memory regions   Albert ARIBAUD
    • [U-Boot] [PATCH v3 11/18] arm: Add control over cachability of memory regions   Mike Frysinger
    • [U-Boot] [PATCH v3 12/18] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment   Simon Glass
    • [U-Boot] [PATCH v3 12/18] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment   Mike Frysinger
    • [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
    • [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Mike Frysinger
    • [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update   Mike Frysinger
    • [U-Boot] [PATCH v3 14/18] tegra: Align LCD frame buffer to section boundary   Simon Glass
    • [U-Boot] [PATCH v3 14/18] tegra: Align LCD frame buffer to section boundary   Mike Frysinger
    • [U-Boot] [PATCH v3 15/18] tegra: Support control of cache settings for LCD   Simon Glass
    • [U-Boot] [PATCH v3 16/18] tegra: fdt: Add LCD definitions for Seaboard   Simon Glass
    • [U-Boot] [PATCH v3 17/18] lcd: Add CONSOLE_SCROLL_LINES option to speed console   Simon Glass
    • [U-Boot] [PATCH v3 17/18] lcd: Add CONSOLE_SCROLL_LINES option to speed console   Mike Frysinger
    • [U-Boot] [PATCH v3 18/18] tegra: Enable display/lcd support on Seaboard   Simon Glass
    • [U-Boot] [PATCH v3 0/18] tegra: Add display driver and LCD support for Seaboard   Thierry Reding
    • [U-Boot] [PATCH v3 0/18] tegra: Add display driver and LCD support for Seaboard   Simon Glass
    • [U-Boot] [PATCH] powerpc/mpc85xx: Change NMG_CPU_A011 workaround condition   York Sun
• [U-Boot] Intro guide for configuring U-Boot for a custom board?   Luciano Moretti
  • [U-Boot] Intro guide for configuring U-Boot for a custom board?   Albert ARIBAUD
• [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?   Rob Herring
  • [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?   Albert ARIBAUD
    • [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?   Wolfgang Denk
      • [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?   Rob Herring
      • [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?   Albert ARIBAUD
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Timur Tabi
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   sun york-R58495
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Scott Wood
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Timur Tabi
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   sun york-R58495
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Wolfgang Denk
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   sun york-R58495
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Tabi Timur-B04825
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   York Sun
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Tabi Timur-B04825
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Wolfgang Denk
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Timur Tabi
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Wolfgang Denk
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Timur Tabi
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Scott Wood
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Timur Tabi
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Scott Wood
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Timur Tabi
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Scott Wood
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Timur Tabi
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Scott Wood
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Wolfgang Denk
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Scott Wood
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Wolfgang Denk
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Scott Wood
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Wolfgang Denk
• [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Scott Wood
  • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Timur Tabi
    • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Wolfgang Denk
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Tabi Timur-B04825
      • [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Wolfgang Denk
• [U-Boot] problem on BL1.bin   VISWANADHULA BALAJI
  • [U-Boot] problem on BL1.bin   Wolfgang Denk
  • [U-Boot] problem on BL1.bin   Chander Kashyap
  • [U-Boot] problem on BL1.bin   Mike Frysinger
    • [U-Boot] [PATCH] Add support for DS1388.   Kenth Eriksson
  • [U-Boot] ksz9021 phy support   Schneider, Kolja
    • [U-Boot] ksz9021 phy support   Dirk Behme
• [U-Boot] [U-Boot-DM] FDT driver initialization function declaration   Marek Vasut
  • [U-Boot] __led_set usage is inconsistent   Holger Freyther
    • [U-Boot] __led_set usage is inconsistent   Mike Frysinger
      • [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros   Horst Kronstorfer
      • [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros   Mike Frysinger
      • [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros   Horst Kronstorfer
      • [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros   Mike Frysinger
      • [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros   Horst Kronstorfer
      • [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros   Mike Frysinger
      • [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros   Horst Kronstorfer
      • [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros   Mike Frysinger
      • [U-Boot] [PATCH,v2] dts/Makefile: Turn off some predefined macros   Horst Kronstorfer
• [U-Boot] Doubt on uboot code   VISWANADHULA BALAJI
  • [U-Boot] Doubt on uboot code   Wolfgang Denk
    • [U-Boot] V2 S3c64xx: Switch all I/O to use readl/writel functio and Clear variable   Zhong Hongbo
    • [U-Boot] [V2 01/15] SMDK6400: Move smdk6400 board from Makefile to boards.cfg   Zhong Hongbo
    • [U-Boot] [V2 02/15] S3C64XX: Switch to use readl/writel to operate nand flash   Zhong Hongbo
    • [U-Boot] [V2 03/15] S3C64XX: Use readl/writel to operate uart   Zhong Hongbo
    • [U-Boot] =?yes?q?=5BV2=2004/15=5D=20S3C64XX=3A=20add=20pwm=20for=20s3c64xx=20support?=   Zhong Hongbo
    • [U-Boot] [V2 04/15] S3C64XX: add pwm for s3c64xx support   Zhong Hongbo
    • [U-Boot] [V2 04/15] S3C64XX: add pwm for s3c64xx support   Zhong Hongbo
    • [U-Boot] [V2 04/15] S3C64XX: add pwm for s3c64xx support   Minkyu Kang
    • [U-Boot] [V2 05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer   Zhong Hongbo
    • [U-Boot] [V2 06/15] S3C64xx: mov cpu_init.S to the board directory   Zhong Hongbo
    • [U-Boot] [V2 07/15] S3C6400: Delete nand_spl for S3C6400   Zhong Hongbo
    • [U-Boot] [V2 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash   Zhong Hongbo
    • [U-Boot] [V2 09/15] arm1176: Fixed No relocation.   Zhong Hongbo
    • [U-Boot] [V2 10/15] S3C64XX: Change SROM init to use read/write operation   Zhong Hongbo
    • [U-Boot] [V2 11/15] S3C64XX: Switch to use read/writel to operation clock system   Zhong Hongbo
    • [U-Boot] [V2 11/15] S3C64XX: Switch to use read/writel to operation clock system   Minkyu Kang
    • [U-Boot] [V2 11/15] S3C64XX: Switch to use read/writel to operation clock system   Zhong Hongbo
    • [U-Boot] [V2 12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable.   Zhong Hongbo
    • [U-Boot] [V2 12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable.   Minkyu Kang
    • [U-Boot] [V2 13/15] S3C6400: clear memory init variable   Zhong Hongbo
    • [U-Boot] [V2 13/15] S3C6400: clear memory init variable   Minkyu Kang
    • [U-Boot] [V2 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board   Zhong Hongbo
    • [U-Boot] [V2 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board   Minkyu Kang
    • [U-Boot] [V2 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board   Zhong Hongbo
    • [U-Boot] [V2 15/15] S3C6400: Remove the unused variable for S3C6400   Zhong Hongbo
  • [U-Boot] uboot for zyxel nsa320   kqt4at5v at gmail.com
    • [U-Boot] uboot for zyxel nsa320   Luka Perkov
      • [U-Boot] uboot for zyxel nsa320   kqt4at5v at gmail.com
      • [U-Boot] uboot for zyxel nsa320   Luka Perkov
      • [U-Boot] uboot for zyxel nsa320   kqt4at5v at gmail.com
      • [U-Boot] [PATCH 1/2] sf: stmicro: support JEDEC standard two-byte signature   Stephan Linz
      • [U-Boot] [PATCH 2/2] sf: stmicro: add support N25Q128 parts   Stephan Linz
• [U-Boot] [PATCH] part_mac: dcache: allocate cacheline-aligned buffers   Benoît Thébaudeau
  • [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory   Javier Martinez Canillas
  • [U-Boot] [PATCH u-boot-arm/next 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
  • [U-Boot] [PATCH u-boot-arm/next 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards   Tom Rini
  • [U-Boot] [PATCH u-boot-arm/next 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
  • [U-Boot] [PATCH v2] ARM: Remove unused stack and irq config defines   Rob Herring
  • [U-Boot] Please pull u-boot-mmc.git   Andy Fleming
  • [U-Boot] Please pull u-boot-mmc.git   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller   Stephan Linz
  • [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller   Michal Simek
  • [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller   Stephan Linz
  • [U-Boot] [PATCH 2/2] microblaze: Wire up SPI driver   Stephan Linz
• [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard   Simon Glass
  • [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard   Thierry Reding
  • [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard   Simon Glass
  • [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard   Christian Kroehnert
  • [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
• [U-Boot] i.MX dcache issues   Benoît Thébaudeau
  • [U-Boot] i.MX dcache issues   Benoît Thébaudeau
    • [U-Boot] i.MX dcache issues   Dirk Behme
      • [U-Boot] i.MX dcache issues   Benoît Thébaudeau
      • [U-Boot] i.MX dcache issues   Marek Vasut
      • [U-Boot] i.MX dcache issues   Benoît Thébaudeau
      • [U-Boot] i.MX dcache issues   Marek Vasut
      • [U-Boot] i.MX dcache issues   Stefano Babic
      • [U-Boot] i.MX dcache issues   Marek Vasut
    • [U-Boot] i.MX dcache issues   Stefano Babic
  • [U-Boot] i.MX dcache issues   Stefano Babic
    • [U-Boot] i.MX dcache issues   Benoît Thébaudeau
      • [U-Boot] i.MX dcache issues   Dirk Behme
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Macpaul Lin
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Marek Vasut
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Macpaul Lin
      • [U-Boot] [PATCH v2] nds32: split common cache access from cpu into lib   Macpaul Lin
      • [U-Boot] [PATCH v2] nds32: split common cache access from cpu into lib   Macpaul Lin
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Mike Frysinger
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Macpaul Lin
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Marek Vasut
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Mike Frysinger
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Marek Vasut
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Macpaul Lin
      • [U-Boot] [PATCH] nds32: split common cache access from cpu into lib   Mike Frysinger
• [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location   Tabi Timur-B04825
• [U-Boot] DaVinci PHYs   Marek Vasut
  • [U-Boot] DaVinci PHYs   Heiko Schocher
    • [U-Boot] DaVinci PHYs   Tom Rini
      • [U-Boot] DaVinci PHYs   Marek Vasut
      • [U-Boot] DaVinci PHYs   Tom Rini
      • [U-Boot] DaVinci PHYs   Marek Vasut
      • [U-Boot] [PATCH V2 0/8] Fixes to EHCI cache handling & smsc95xx   Ilya Yanok
      • [U-Boot] [PATCH V2 1/8] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init   Ilya Yanok
      • [U-Boot] [PATCH V2 2/8] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER   Ilya Yanok
      • [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
      • [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
      • [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
      • [U-Boot] [PATCH] ehci-hcd: program asynclistaddr before every transfer   Ilya Yanok
      • [U-Boot] [PATCH V2a 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
      • [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Ilya Yanok
      • [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH V2 4/8] ehci-hcd: fix external buffer cache handling   Ilya Yanok
      • [U-Boot] [PATCH V2 4/8] ehci-hcd: fix external buffer cache handling   Marek Vasut
      • [U-Boot] [PATCH V2 5/8] usb: pass cache-aligned buffer to usb_get_descriptor()   Ilya Yanok
      • [U-Boot] [PATCH V2 6/8] usb: check return value of submit_{control, bulk}_msg   Ilya Yanok
      • [U-Boot] [PATCH V2 7/8] ehci-hcd: change debug() to printf() in case of errors   Ilya Yanok
      • [U-Boot] [PATCH V2 8/8] smsc95xx: align buffers to cache line size   Ilya Yanok
• [U-Boot] Uboot and initramfs   Wojtek
  • [U-Boot] Uboot and initramfs   Frank Agius
• [U-Boot] [PATCH] tools: add kwboot binary to .gitignore file   Luka Perkov
  • [U-Boot] [PATCH] tools: add kwboot binary to .gitignore file   Prafulla Wadaskar
  • [U-Boot] [PATCH] tools: add kwboot binary to .gitignore file   Mike Frysinger
• [U-Boot] USB on mx53   Stefano Babic
• [U-Boot] [PATCH] kirkwood: add support for Iomega iConnect board   Luka Perkov
• [U-Boot] [PATCH v2 1/2] imx: Use a clear identification of an unidentified CPU type   Stefano Babic
• [U-Boot] [PATCH v3 2/2] mxs: generalize code for print_cpuinfo()   Stefano Babic
  • [U-Boot] [PATCH v3 2/2] mxs: generalize code for print_cpuinfo()   Otavio Salvador
• [U-Boot] [PATCH v2 0/4] Board support and feature for LaCie devices   Simon Guinot
• [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory   Tom Rini
  • [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory   Javier Martinez Canillas
    • [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory   Tom Rini
      • [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory   Enric Balletbò i Serra
• [U-Boot] [PATCH] Add support for eco5-pk ARM board   Raphael Assenat
  • [U-Boot] [PATCH v3] i.MX28: extend print_cpuinfo() to use chip information   Otavio Salvador
  • [U-Boot] [PATCH v3] i.MX28: extend print_cpuinfo() to use chip information   Marek Vasut
  • [U-Boot] [PATCH v3] i.MX28: extend print_cpuinfo() to use chip information   Otavio Salvador
  • [U-Boot] [PATCH v3] i.MX28: extend print_cpuinfo() to use chip information   Stefano Babic
  • [U-Boot] [RFC PATCH 0/2] i.MX28 SoC pending patches   Otavio Salvador
  • [U-Boot] [RFC PATCH 1/2] i.MX28: Check if we are using a valid VBUS when initializing power   Otavio Salvador
  • [U-Boot] [RFC PATCH 1/2] i.MX28: Check if we are using a valid VBUS when initializing power   Marek Vasut
  • [U-Boot] [RFC PATCH 1/2] i.MX28: Check if we are using a valid VBUS when initializing power   Otavio Salvador
  • [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization   Otavio Salvador
  • [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization   Marek Vasut
  • [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization   Stefano Babic
  • [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization   Otavio Salvador
  • [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization   Stefano Babic
  • [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization   Otavio Salvador
• [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Detlev Zundel
  • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Graeme Russ
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Stefan Roese
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Graeme Russ
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Graeme Russ
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Wolfgang Denk
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Graeme Russ
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Graeme Russ
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Graeme Russ
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Andy Pont
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Wolfgang Denk
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Wolfgang Denk
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Tom Rini
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Wolfgang Denk
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Tom Rini
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Tom Rini
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Graeme Russ
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Tom Rini
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Tom Rini
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Tom Rini
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Tom Rini
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Wolfgang Denk
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Mike Frysinger
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Tom Rini
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
  • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Kim Phillips
    • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
      • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Graeme Russ
      • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Scott Wood
      • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Graeme Russ
      • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
      • [U-Boot] [PATCH v2] i.MX28: Check if we are using a valid VBUS for power initialization   Otavio Salvador
      • [U-Boot] [PATCH v2] i.MX28: Check if we are using a valid VBUS for power initialization   Marek Vasut
      • [U-Boot] [PATCH v2] i.MX28: Check if we are using a valid VBUS for power initialization   Otavio Salvador
      • [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL   Allen Martin
      • [U-Boot] [PATCH v7 01/15] tegra20: rename tegra2 -> tegra20   Allen Martin
      • [U-Boot] [PATCH v7 01/15] tegra20: rename tegra2 -> tegra20   Simon Glass
      • [U-Boot] [PATCH v7 02/15] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
      • [U-Boot] [PATCH v7 03/15] tegra20: rename CONFIG_MACH_TEGRA_GENERIC   Allen Martin
      • [U-Boot] [PATCH v7 05/15] tegra20: make board mkdir commands unconditional   Allen Martin
      • [U-Boot] [PATCH v7 07/15] ARM: Fix arm720t SPL build   Allen Martin
      • [U-Boot] [PATCH v7 08/15] tegra20: remove timer_init from SPL build   Allen Martin
      • [U-Boot] [PATCH v7 09/15] ARM: add tegra20 support to arm720t   Allen Martin
      • [U-Boot] [PATCH v7 09/15] ARM: add tegra20 support to arm720t   Simon Glass
      • [U-Boot] [PATCH v7 10/15] tegra20: add u-boot-*-tegra.bin targets   Allen Martin
      • [U-Boot] [PATCH v7 11/15] tegra20: move SDRAM param save to later in boot   Allen Martin
      • [U-Boot] [PATCH v7 12/15] tegra20: enable SPL for tegra20 boards   Allen Martin
      • [U-Boot] [PATCH v7 13/15] arm: enable libgcc build for SPL   Allen Martin
      • [U-Boot] [PATCH v7 14/15] spl: fix SPL build of private libgcc   Allen Martin
      • [U-Boot] [PATCH v7 15/15] tegra20: Remove armv4t build flags   Allen Martin
      • [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL   Tom Warren
      • [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL   Allen Martin
      • [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL   Tom Warren
      • [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL   Simon Glass
      • [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL   Tom Warren
      • [U-Boot] [PATCH v7 04/15] tegra20: tec: add tegra20-common-post.h   Allen Martin
      • [U-Boot] [PATCH v7 06/15] mkconfig: add support for SPL CPU   Allen Martin
      • [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
      • [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards   Enric Balletbò i Serra
      • [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards   Thomas Petazzoni
      • [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
      • [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards   Enric Balletbò i Serra
      • [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
      • [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards   Enric Balletbò i Serra
      • [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
• [U-Boot] Pull request: u-boot-nios/master   Thomas Chou
  • [U-Boot] Pull request: u-boot-nios/master   Wolfgang Denk
    • [U-Boot] [PATCH] ppc: Create a stack frame for wait_ticks()   Joakim Tjernlund
• [U-Boot] USB enumeration problem on iMX53 hardware   Gérald Germain
  • [U-Boot] [PATCH] ARM: OMAP4: PANDA: Fix the broken tftp issue.   R Sricharan
  • [U-Boot] [PATCH] ARM: OMAP4: PANDA: Fix the broken tftp issue.   Gary Thomas
  • [U-Boot] [PATCH v2] i.MX28: use a clear name for DDR2 initialization   Otavio Salvador
• [U-Boot] Pull request: u-boot-video/next   Anatolij Gustschin
  • [U-Boot] Pull request: u-boot-video/next   Wolfgang Denk
  • [U-Boot] Please pull u-boot-ti/master for v2012.07   Tom Rini
    • [U-Boot] Please pull u-boot-ti/master for v2012.07   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Mike Frysinger
  • [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Jorgen Lundman
    • [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Graeme Russ
    • [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Mike Frysinger
      • [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Jorgen Lundman
      • [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Mike Frysinger
      • [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Jorgen Lundman
      • [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support   Mike Frysinger
      • [U-Boot] [PATCH v3 1/2] tools, config.mk: add binutils-version   Allen Martin
      • [U-Boot] [PATCH v3 2/2] arm: work around assembler bug   Allen Martin
      • [U-Boot] [PATCH v3 2/2] arm: work around assembler bug   Allen Martin
      • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Allen Martin
      • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Mike Frysinger
      • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Tom Rini
      • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Mike Frysinger
      • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Tom Rini
      • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Mike Frysinger
      • [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version   Tom Rini
      • [U-Boot] [PATCH v4 2/2] arm: work around assembler bug   Allen Martin
      • [U-Boot] [PATCH v4 2/2] arm: work around assembler bug   Albert ARIBAUD
      • [U-Boot] [PATCH v4 2/2] arm: work around assembler bug   Tom Rini
• [U-Boot] [PATCH v2] video: support exynos fimd driver for various exynos series   Donghwa Lee
  • [U-Boot] [PATCH v2] video: support exynos fimd driver for various exynos series   Minkyu Kang
  • [U-Boot] [PATCH v2] video: support exynos fimd driver for various exynos series   Anatolij Gustschin
    • [U-Boot] [PATCH v2] video: support exynos fimd driver for various exynos series   Minkyu Kang
      • [U-Boot] [PATCH] tools: clean up mingw ifdefs   Mike Frysinger
      • [U-Boot] [PATCH] tools: clean up mingw ifdefs   Wolfgang Denk
• [U-Boot] [PATCH] Makefile: change LIB to LIB-y   Mike Frysinger
• [U-Boot] [PATCH 1/3] Makefile: allow appending to LIB in sub-makefiles   Mike Frysinger
• [U-Boot] [PATCH 2/3] Makefile: replace LIBS by LIBS-y   Mike Frysinger
• [U-Boot] [PATCH 3/3] Makefile: cosmetic: optimize usage of LIBS-y   Mike Frysinger
  • [U-Boot] [PATCH 3/3] Makefile: cosmetic: optimize usage of LIBS-y   Daniel Schwierzeck
• [U-Boot] [PATCH v3 1/4] Add support new arch: c6x   Mike Frysinger
• [U-Boot] [PATCH v3 2/4] c6x: Add support c674x CPUs   Mike Frysinger
• [U-Boot] [PATCH v3 3/4] c6x: Add suport build davinci SOC with c674x CPUs   Mike Frysinger
• [U-Boot] [PATCH v3 4/4] c6x: Add support c6745-som board   Mike Frysinger
  • [U-Boot] [PATCH] Blackfin: bfin_mac: drop volatile markings on packet buffers   Mike Frysinger
  • [U-Boot] Pull request u-boot-blackfin.git (master branch)   Mike Frysinger
  • [U-Boot] Pull request u-boot-blackfin.git (master branch)   Wolfgang Denk
• [U-Boot] Please pull u-boot-imx for v2012.07   Stefano Babic
  • [U-Boot] Please pull u-boot-imx for v2012.07   Albert ARIBAUD
    • [U-Boot] [PATCH u-boot-arm/next v2 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
    • [U-Boot] [PATCH u-boot-arm/next v2 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards   Enric Balletbò i Serra
    • [U-Boot] [PATCH u-boot-arm/next v2 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
• [U-Boot] [PATCH] net: link_local: fix build   Benoît Thébaudeau
  • [U-Boot] [PATCH] net: link_local: fix build   Joe Hershberger
• [U-Boot] [PATCH v2 0/4] Board support and feature for LaCie devices   Simon Guinot
• [U-Boot] [PATCH] net: bootp: fix build   Benoît Thébaudeau
  • [U-Boot] [PATCH] net: bootp: fix build   Joe Hershberger
• [U-Boot] [PATCH] ARM1136: Fix cache range checks   Benoît Thébaudeau
  • [U-Boot] [PATCH] ARM1136: Fix cache range checks   Stefano Babic
    • [U-Boot] [PATCH 0/8 V6] EXYNOS5: Enable I2C support   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/8 V6] EXYNOS: CLK: Add i2c clock   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/8 V6] EXYNOS: CLK: Add i2c clock   Simon Glass
    • [U-Boot] [PATCH 2/8 V6] EXYNOS: Add I2C base address.   Rajeshwari Shinde
    • [U-Boot] [PATCH 3/8 V6] EXYNOS5: define EXYNOS5_I2C_SPACING   Rajeshwari Shinde
    • [U-Boot] [PATCH 3/8 V6] EXYNOS5: define EXYNOS5_I2C_SPACING   Simon Glass
    • [U-Boot] [PATCH 4/8 V6] EXYNOS: PINMUX: Add pinmux support for I2C   Rajeshwari Shinde
    • [U-Boot] [PATCH 5/8 V6] I2C: Move struct s3c24x0_i2c to a common place.   Rajeshwari Shinde
    • [U-Boot] [PATCH 6/8 V6] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Shinde
    • [U-Boot] [PATCH 6/8 V6] I2C: Modify the I2C driver for EXYNOS5   Simon Glass
    • [U-Boot] [PATCH 6/8 V6] I2C: Modify the I2C driver for EXYNOS5   Joonyoung Shim
    • [U-Boot] [PATCH 7/8 V6] I2C: Add support for Multi channel   Rajeshwari Shinde
    • [U-Boot] [PATCH 8/8 V6] CONFIG: SMDK5250: I2C: Enable I2C   Rajeshwari Shinde
    • [U-Boot] [PATCH 8/8 V6] CONFIG: SMDK5250: I2C: Enable I2C   Simon Glass
    • [U-Boot] [PATCH 8/8 V6] CONFIG: SMDK5250: I2C: Enable I2C   Joonyoung Shim
• [U-Boot] [PATCH 1/2] net: fec_mxc: Fix setting of RCR for xMII   Benoît Thébaudeau
• [U-Boot] [PATCH 2/2] net: fec_mxc: Fix MDC for xMII   Benoît Thébaudeau
  • [U-Boot] [PATCH 2/2] net: fec_mxc: Fix MDC for xMII   Joe Hershberger
• [U-Boot] I apply to maintain S3C6400 board for u-boot   Zhong Hongbo
  • [U-Boot] I apply to maintain S3C6400 board for u-boot   Zhong Hongbo
  • [U-Boot] I apply to maintain S3C6400 board for u-boot   Wolfgang Denk
    • [U-Boot] I apply to maintain S3C6400 board for u-boot   Zhong Hongbo
• [U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM   Mike Frysinger
  • [U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM   Marek Vasut
    • [U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM   Mike Frysinger
• [U-Boot] [PATCH] Added watchdog support for davinchi_dm365evm   Mike Frysinger
• [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board   Luka Perkov
  • [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board   Prafulla Wadaskar
    • [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board   Luka Perkov
    • [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board   Wojciech Dubowik
  • [U-Boot] cross compile suceeds but not usable   kqt4at5v at gmail.com
    • [U-Boot] [PATCH u-boot-arm/next v3 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
• [U-Boot] Pull request: u-boot-net.git next   Joe Hershberger
  • [U-Boot] Pull request: u-boot-net.git next   Wolfgang Denk
  • [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
    • [U-Boot] Pull request: u-boot-net.git master   Wolfgang Denk
• [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code   Marek Vasut
  • [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code   Stefano Babic
    • [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code   Marek Vasut
• [U-Boot] (no subject)   Gigin Jose
  • [U-Boot] [PATCH V3 01/25] mxc_i2c: fix i2c_imx_stop   Troy Kisky
  • [U-Boot] [PATCH V3 04/25] mxc_i2c: clear i2sr before waiting for bit   Troy Kisky
  • [U-Boot] [PATCH V3 05/25] mxc_i2c: create i2c_init_transfer   Troy Kisky
  • [U-Boot] [PATCH V3 07/25] mxc_i2c.c: code i2c_probe as a 0 length i2c_write   Troy Kisky
  • [U-Boot] [PATCH V3 08/25] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state   Troy Kisky
  • [U-Boot] [PATCH V3 09/25] mxc_i2c: remove redundant read   Troy Kisky
  • [U-Boot] [PATCH V3 10/25] mxc_i2c: place imx_start code inline   Troy Kisky
  • [U-Boot] [PATCH V3 11/25] mxc_i2c: place i2c_reset code inline   Troy Kisky
  • [U-Boot] [PATCH V3 12/25] mxc_i2c: don't disable controller after every transaction   Troy Kisky
  • [U-Boot] [PATCH V3 13/25] mxc_i2c: change slave addr if conflicts with destination.   Troy Kisky
  • [U-Boot] [PATCH V3 14/25] mxc_i2c: check for arbitration lost   Troy Kisky
  • [U-Boot] [PATCH V3 15/25] mxc_i2c: add retries   Troy Kisky
  • [U-Boot] [PATCH V3 16/25] mxc_i2c: add i2c_regs argument to i2c_imx_stop   Troy Kisky
  • [U-Boot] [PATCH V3 17/25] mxc_i2c: prep work for multiple busses support   Troy Kisky
  • [U-Boot] [PATCH V3 18/25] mxc_i2c: add bus recovery support   Troy Kisky
  • [U-Boot] [PATCH V3 19/25] mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support   Troy Kisky
  • [U-Boot] [PATCH V3 20/25] iomux-v3: remove include of mx6x_pins.h   Troy Kisky
  • [U-Boot] [PATCH V3 20/25] iomux-v3: remove include of mx6x_pins.h   Liu Hui-R64343
  • [U-Boot] [PATCH V3 21/25] i.mx: iomux-v3.h: move to imx-common include directory   Troy Kisky
  • [U-Boot] [PATCH V3 22/25] i.mx: iomux-v3.c: move to imx-common directory   Troy Kisky
  • [U-Boot] [PATCH V3 23/25] i.mx53: add definition for I2C3_BASE_ADDR   Troy Kisky
  • [U-Boot] [PATCH V3 24/25] imx-common: add i2c.c for bus recovery support   Troy Kisky
  • [U-Boot] [PATCH V3 25/25] mx6qsabrelite: add i2c multi-bus support   Troy Kisky
  • [U-Boot] [PATCH V3 25/25] mx6qsabrelite: add i2c multi-bus support   Liu Hui-R64343
  • [U-Boot] [PATCH V3 02/25] mxc_i2c: remove ifdef of CONFIG_HARD_I2C   Troy Kisky
  • [U-Boot] [PATCH V3 03/25] mxc_i2c: create tx_byte function   Troy Kisky
  • [U-Boot] [PATCH V3 06/25] mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write   Troy Kisky
• [U-Boot] [PATCH 1/5] ehci: cosmetic: Define the number of qt_buffers   Benoît Thébaudeau
  • [U-Boot] [PATCH 1/5] ehci: cosmetic: Define the number of qt_buffers   Marek Vasut
• [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
    • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Stefan Herbrechtsmeier
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Stefan Herbrechtsmeier
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Stefan Herbrechtsmeier
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Stefan Herbrechtsmeier
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Stefan Herbrechtsmeier
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Stefan Herbrechtsmeier
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Stefan Herbrechtsmeier
    • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
  • [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
    • [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
      • [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
      • [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
      • [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Benoît Thébaudeau
      • [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed   Marek Vasut
• [U-Boot] [PATCH 3/5] usb_storage: Remove EHCI constraints   Benoît Thébaudeau
• [U-Boot] [PATCH 4/5] usb_storage: Restore non-EHCI support   Benoît Thébaudeau
  • [U-Boot] [PATCH 4/5] usb_storage: Restore non-EHCI support   Marek Vasut
    • [U-Boot] [PATCH 4/5] usb_storage: Restore non-EHCI support   Benoît Thébaudeau
• [U-Boot] [PATCH 5/5] usb_storage: Adjust time-outs   Benoît Thébaudeau
  • [U-Boot] [PATCH 5/5] usb_storage: Adjust time-outs   Marek Vasut
    • [U-Boot] [PATCH 5/5] usb_storage: Adjust time-outs   Benoît Thébaudeau
• [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation   Yann Vernier
• [U-Boot] [PATCH 1/7] FAT: get_fatent: Fix FAT boundary check   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 2/8] FAT: get_fatent: Fix FAT boundary check   Benoît Thébaudeau
• [U-Boot] [PATCH 2/7] FAT: cosmetic: Remove useless assignment   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 3/8] FAT: cosmetic: Remove useless assignment   Benoît Thébaudeau
• [U-Boot] [PATCH 3/7] FAT: Fix redundant sector read   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 4/8] FAT: Fix redundant sector read   Benoît Thébaudeau
• [U-Boot] [PATCH 4/7] FAT: Fix file contents listed as directory   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 5/8] FAT: Fix file contents listed as directory   Benoît Thébaudeau
• [U-Boot] [PATCH 5/7] FAT: get_cluster: Add buffer bouncing   Benoît Thébaudeau
  • [U-Boot] [PATCH 5/7] FAT: get_cluster: Add buffer bouncing   Mike Frysinger
    • [U-Boot] [PATCH 5/7] FAT: get_cluster: Add buffer bouncing   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 6/8] FAT: get_cluster: Add buffer bouncing   Benoît Thébaudeau
• [U-Boot] [PATCH 6/7] FAT: Simplify get_contents   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents   Benoît Thébaudeau
• [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position   Benoît Thébaudeau
  • [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position   Mike Frysinger
    • [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position   Benoît Thébaudeau
      • [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position   Mike Frysinger
      • [U-Boot] [PATCH v2 8/8] FAT: Make it possible to read from any file position   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 3/3] Makefile: cosmetic: optimize usage of LIBS-y   daniel.schwierzeck at gmail.com
      • [U-Boot] [PATCH v2] arm: rmobile: Support build with gcc-4.6 or later   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH v2] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH v3] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] arm: rmobile: Add support PFC of Renesas SH73A0   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] arm: rmobile: kzm9g: Fix CONFIG_BAUDRATE setting   Tetsuyuki Kobayshi
      • [U-Boot] [PATCH] arm: rmobile: kzm9g: Fix CONFIG_BAUDRATE setting   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/7] sf: winbond: Add support for the Winbond W25Q80BL   Mike Frysinger
  • [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Mike Frysinger
  • [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Wolfgang Denk
• [U-Boot] [PATCH 0/3] mmc: sdhci: fixed some problems for Exynos   Jaehoon Chung
  • [U-Boot] [PATCH 0/3] mmc: sdhci: fixed some problems for Exynos   Jaehoon Chung
• [U-Boot] [PATCH 1/3] mmc: s5p_sdhci: set the SDHCI_QUIRK_BROKEN_R1B   Jaehoon Chung
• [U-Boot] [PATCH 2/3] mmc: s5p_mmc: fixed wrong function argument   Jaehoon Chung
• [U-Boot] [PATCH 3/3] mmc: s5p_sdhci: add the set_mmc_clk for cmu control   Jaehoon Chung
  • [U-Boot] [PATCH v5 0/1] zfs: Add ZFS filesystem support   Jorgen Lundman
  • [U-Boot] [PATCH v5 1/1] zfs: Add ZFS filesystem support   Jorgen Lundman
• [U-Boot] Wrong identify on u-boot-arm/next   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-usb/master   Wolfgang Denk
  • [U-Boot] [PULL] u-boot-usb/master   McClintock Matthew-B29882
    • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
    • [U-Boot] [PULL] u-boot-usb/master   McClintock Matthew-B29882
    • [U-Boot] [PULL] u-boot-usb/master   Ilya Yanok
    • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
    • [U-Boot] [PATCH] MPC85XX: compile stub cache function   Stefano Babic
    • [U-Boot] [PATCH] MPC85XX: compile stub cache function   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] powerpc: Stack Pointer must be 16 aligned   Joakim Tjernlund
    • [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
    • [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.   Scott Wood
    • [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
    • [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
    • [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.   Scott Wood
    • [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
    • [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.   Scott Wood
    • [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
    • [U-Boot] [PATCH 1/2] powerpc: Stack Pointer must be 16 aligned   Scott Wood
    • [U-Boot] [PATCH 1/2] powerpc: Stack Pointer must be 16 aligned   Joakim Tjernlund
  • [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board   Prafulla Wadaskar
    • [U-Boot] [PATCH] SMDK6400: Add MAINTAINERS entry   Zhong Hongbo
    • [U-Boot] [PATCH] SMDK6400: Add MAINTAINERS entry   Zhong Hongbo
    • [U-Boot] [PATCH] SMDK6400: Add MAINTAINERS entry   Wolfgang Denk
  • [U-Boot] Pull request: ub-oot-arm/master   Albert ARIBAUD
    • [U-Boot] Pull request: ub-oot-arm/master   Wolfgang Denk
      • [U-Boot] [PATCH v3 1/4] kirkwood: use c-struct for access to SDRAM addr decode registers   Holger Brunck
      • [U-Boot] [PATCH v3 2/4] kirkwood: implement kw_sdram_bs_set()   Holger Brunck
      • [U-Boot] [PATCH v3 2/4] kirkwood: implement kw_sdram_bs_set()   Prafulla Wadaskar
      • [U-Boot] [PATCH v3 3/4] kirkwood: implement kw_sdram_size_adjust   Holger Brunck
      • [U-Boot] [PATCH v3 3/4] kirkwood: implement kw_sdram_size_adjust   Prafulla Wadaskar
      • [U-Boot] [PATCH v4 3/4] kirkwood: implement kw_sdram_size_adjust   Gerlando Falauto
      • [U-Boot] [PATCH v3 4/4] arm/km: use kw_sdram_size_adjust to adjust SDRAM size   Holger Brunck
      • [U-Boot] [PATCH v3 4/4] arm/km: use kw_sdram_size_adjust to adjust SDRAM size   Prafulla Wadaskar
      • [U-Boot] [PATCH v4 4/4] arm/km: use kw_sdram_size_adjust to adjust SDRAM size   Gerlando Falauto
      • [U-Boot] [PATCH v3 1/4] kirkwood: use c-struct for access to SDRAM addr decode registers   Prafulla Wadaskar
  • [U-Boot] Unable to power the USB Keyboard on u-boot   Atul Kumar
    • [U-Boot] Unable to power the USB Keyboard on u-boot   Marek Vasut
      • [U-Boot] Unable to power the USB Keyboard on u-boot   atulronu
      • [U-Boot] Unable to power the USB Keyboard on u-boot   Marek Vasut
      • [U-Boot] Unable to power the USB Keyboard on u-boot   Tom Rini
• [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Benoît Thébaudeau
  • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Mike Frysinger
    • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Benoît Thébaudeau
      • [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces   Wolfgang Denk
• [U-Boot] [PATCH] md5: Export step-by-step API   Benoît Thébaudeau
  • [U-Boot] [PATCH] md5: Export step-by-step API   Mike Frysinger
• [U-Boot] [PATCH] rtc: pcf8563: Make century compatible with Linux   Benoît Thébaudeau
• [U-Boot] [PATCH] rtc: imxdi: Initial support   Benoît Thébaudeau
• [U-Boot] [PATCH v3] global_data: unify global flag defines   Mike Frysinger
  • [U-Boot] Pull request: u-boot-nds32   Macpaul Lin
    • [U-Boot] Pull request: u-boot-nds32   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] kirkwood: ib62x0: Invert SATA activity LEDs   Simon Baatz
      • [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree   Simon Baatz
      • [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree   Luka Perkov
      • [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree   DrEagle
      • [U-Boot] [PATCH 1/2] kirkwood: ib62x0: Invert SATA activity LEDs   Luka Perkov
      • [U-Boot] [PATCH] common.h: Remove include compiler.h   Marek Vasut
      • [U-Boot] [PATCH] common.h: Remove include compiler.h   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] powerpc/mpc85xx: Ignore E bit for BSC9130/1   York Sun
      • [U-Boot] [PATCH 2/2] powerpc/mpc85xx: Enable workaround for erratum CPU_A011 for P3041   York Sun
• [U-Boot] Pull request #2: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request #2: u-boot-arm/master -- PLEASE IGNORE   Albert ARIBAUD
• [U-Boot] u-boot.bin file format   J.Hwan Kim
  • [U-Boot] u-boot.bin file format   Marek Vasut
    • [U-Boot] [PATCH] disk/partition: Fix the depend for all the partitions file   Zhong Hongbo
• [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree   Simon Baatz
  • [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree   Luka Perkov
• [U-Boot] [PATCH 1/2] net: fec_mxc: Fix setting of RCR for xMII   Benoît Thébaudeau
  • [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292   Marek Vasut
  • [U-Boot] [PATCH 02/10] dm: arm: Remove support for s3c4510   Marek Vasut
  • [U-Boot] [PATCH 03/10] dm: arm: Remove support for NETARM   Marek Vasut
  • [U-Boot] [PATCH 04/10] dm: wdt: arm: Move tnetv107x into drivers/watchdog/   Marek Vasut
  • [U-Boot] [PATCH 05/10] dm: Move s3c24xx USB driver to a proper place   Marek Vasut
  • [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/   Marek Vasut
  • [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/   Tom Rini
  • [U-Boot] [PATCH 07/10] dm: wdt: Move s5p watchdog timer to drivers/watchdog/   Marek Vasut
  • [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c   Marek Vasut
  • [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c   Simon Glass
  • [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c   Simon Glass
  • [U-Boot] [PATCH 09/10] dm: net: Move IXP NPE to drivers/net/   Marek Vasut
  • [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP   Marek Vasut
  • [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP   Tom Rini
  • [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP   Marek Vasut
  • [U-Boot] [PATCH v2] cmd_sf: add size checking to spi flash commands   Mike Frysinger
• [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP   Marek Vasut
  • [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP   Otavio Salvador
  • [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP   Marek Vasut
  • [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP   Otavio Salvador
• [U-Boot] [PATCH] tools/env: check flash length before probing   Mike Frysinger
• [U-Boot] Invalid Netconsole source MAC address [was: Re: [STATUS] v2012.07-rc1 is out - release date July 23]   Michael Walle
  • [U-Boot] Invalid Netconsole source MAC address [was: Re: [STATUS] v2012.07-rc1 is out - release date July 23]   Joe Hershberger
    • [U-Boot] Invalid Netconsole source MAC address [was: Re: [STATUS] v2012.07-rc1 is out - release date July 23]   Michael Walle
      • [U-Boot] Invalid Netconsole source MAC address [was: Re: [STATUS] v2012.07-rc1 is out - release date July 23]   Joe Hershberger
• [U-Boot] Pull request #3 : u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request #3 : u-boot-arm/master   Wolfgang Denk
• [U-Boot] Sparc build warnings   Marek Vasut
  • [U-Boot] Sparc build warnings   Peter Tyser
    • [U-Boot] Sparc build warnings   Mike Frysinger
      • [U-Boot] Sparc build warnings   Marek Vasut
• [U-Boot] [PATCH v3] kirkwood: add support for Iomega iConnect board   Luka Perkov
  • [U-Boot] [PATCH 1/2] BC3450 board: change debug code to using debug()   Wolfgang Denk
  • [U-Boot] [PATCH 2/2] BC3450 board: Remove unused CONFIG_SYS_CPU definition   Wolfgang Denk
  • [U-Boot] [PATCH 2/2] BC3450 board: Remove unused CONFIG_SYS_CPU definition   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] BC3450 board: change debug code to using debug()   Wolfgang Denk
• [U-Boot] [STATUS] v2012.07-rc2 is out - release date July 30   Wolfgang Denk
• [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code   Shimoda, Yoshihiro
  • [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code   Shimoda, Yoshihiro
    • [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code   Joe Hershberger
• [U-Boot] [PATCH] integrator: break out common config   Linus Walleij
  • [U-Boot] [PATCH] integrator: break out common config   Albert ARIBAUD
    • [U-Boot] [PATCH] integrator: break out common config   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] net: fec_mxc: Fix setting of RCR for xMII   Benoît Thébaudeau
• [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Wolfgang Denk
  • [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.   Joakim Tjernlund
  • [U-Boot] [PATCHv2 2/2] powerpc: Stack Pointer not properly aligned   Joakim Tjernlund
• [U-Boot] Antwort: Re: NetConsole & TFTP   Joe Hershberger
• [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Marek Vasut
  • [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12   Eric Nelson
    • [U-Boot] [PATCH] net: Make sure the ethaddr is updated in net_init()   Joe Hershberger
    • [U-Boot] [PATCH] net: Make sure the ethaddr is updated in net_init()   Joe Hershberger
    • [U-Boot] [PATCH] net: Make sure the ethaddr is updated in net_init()   Michael Walle
• [U-Boot] RFC - PatchTrack Specification   Graeme Russ
  • [U-Boot] RFC - PatchTrack Specification   Marek Vasut
  • [U-Boot] RFC - PatchTrack Specification   Wolfgang Denk
• [U-Boot] [PATCH] sh: modify checkcpu() for SH-4A   Shimoda, Yoshihiro
  • [U-Boot] [PATCH] sh: modify checkcpu() for SH-4A   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c   Marek Vasut
  • [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c   Tom Warren
    • [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c   Marek Vasut
      • [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c   Tom Warren
      • [U-Boot] [PATCH 0/8 V7] EXYNOS5: Enable I2C support   Rajeshwari Shinde
      • [U-Boot] [PATCH 1/8 V7] EXYNOS: CLK: Add i2c clock   Rajeshwari Shinde
      • [U-Boot] [PATCH 2/8 V7] EXYNOS: Add I2C base address.   Rajeshwari Shinde
      • [U-Boot] [PATCH 3/8 V7] EXYNOS5: define EXYNOS5_I2C_SPACING   Rajeshwari Shinde
      • [U-Boot] [PATCH 4/8 V7] EXYNOS: PINMUX: Add pinmux support for I2C   Rajeshwari Shinde
      • [U-Boot] [PATCH 5/8 V7] I2C: Move struct s3c24x0_i2c to a common place.   Rajeshwari Shinde
      • [U-Boot] [PATCH 6/8 V7] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Shinde
      • [U-Boot] [PATCH 7/8 V7] I2C: Add support for Multi channel   Rajeshwari Shinde
      • [U-Boot] [PATCH 8/8 V7] CONFIG: SMDK5250: I2C: Enable I2C   Rajeshwari Shinde
      • [U-Boot] [PATCH 0/8 V7] EXYNOS5: Enable I2C support   Simon Glass
    • [U-Boot] RFC - PatchTrack Specification (revised)   Graeme Russ
      • [U-Boot] RFC - PatchTrack Specification (revised)   Wolfgang Denk
      • [U-Boot] RFC - PatchTrack Specification (revised)   Graeme Russ
      • [U-Boot] RFC - PatchTrack Specification (revised)   Andy Pont
      • [U-Boot] RFC - PatchTrack Specification (revised)   Wolfgang Denk
      • [U-Boot] RFC - PatchTrack Specification (revised)   Graeme Russ
      • [U-Boot] RFC - PatchTrack Specification (revised)   Marek Vasut
      • [U-Boot] RFC - PatchTrack Specification (revised)   Graeme Russ
• [U-Boot] building tools/env   Nickos
  • [U-Boot] building tools/env   Mike Frysinger
    • [U-Boot] [PATCH] usb: fallback safely when a configuration descriptor is too large   Vincent Palatin
    • [U-Boot] [PATCH] usb: fallback safely when a configuration descriptor is too large   Simon Glass
  • [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
    • [U-Boot] Pull request: u-boot-net.git master   Wolfgang Denk
  • [U-Boot] Pull request: u-boot-net.git next   Joe Hershberger
    • [U-Boot] Pull request: u-boot-net.git next   Wolfgang Denk
  • [U-Boot] [PATCH 2/4] net: sh_eth: add SH_ETH_TYPE_ condition   Joe Hershberger
    • [U-Boot] [PATCH 3/4] net: sh_eth: modify the definitions of regsiter   Joe Hershberger
  • [U-Boot] [PATCH 4/4] net: sh_eth: add support for SH7757's GETHER   Joe Hershberger
    • [U-Boot] [PATCH] net: Make the netconsole buffer size configurable   Joe Hershberger
    • [U-Boot] [PATCH] net: Make the netconsole buffer size configurable   Mike Frysinger
    • [U-Boot] [PATCH v2] net: Make the netconsole buffer size configurable   Joe Hershberger
    • [U-Boot] [PATCH] net: Make netconsole src and dest ports configurable   Joe Hershberger
    • [U-Boot] [PATCH] net: Make netconsole src and dest ports configurable   Mike Frysinger
    • [U-Boot] [PATCH v2] net: Make netconsole src and dest ports configurable   Joe Hershberger
    • [U-Boot] [PATCH] net: Improve the speed of netconsole   Joe Hershberger
    • [U-Boot] [PATCH] net: Improve the speed of netconsole   Stefano Babic
    • [U-Boot] [PATCH] net: Improve the speed of netconsole   Mike Frysinger
    • [U-Boot] [PATCH] net: Improve the speed of netconsole   Joe Hershberger
    • [U-Boot] [PATCH v3 0/8] CPSW switch plus SPL net support   Ilya Yanok
    • [U-Boot] [PATCH v3 2/8] am33xx: CPSW init and definitions   Ilya Yanok
    • [U-Boot] [PATCH v3 5/8] am335x_evm: CPSW support   Ilya Yanok
    • [U-Boot] [PATCH v3 6/8] net/bootp: add VCI support for BOOTP also   Ilya Yanok
    • [U-Boot] [PATCH v3 6/8] net/bootp: add VCI support for BOOTP also   Joe Hershberger
    • [U-Boot] [PATCH v3 6/8] net/bootp: add VCI support for BOOTP also   Ilya Yanok
    • [U-Boot] [PATCH v3 7/8] OMAP: networking support for SPL   Ilya Yanok
    • [U-Boot] [PATCH v3 8/8] am335x_evm: enable networking in SPL   Ilya Yanok
    • [U-Boot] [PATCH v3 0/8] CPSW switch plus SPL net support   Tom Rini
    • [U-Boot] [PATCH v3 1/8] cpsw: add driver for cpsw ethernet device   Ilya Yanok
    • [U-Boot] [PATCH v3 3/8] am33xx: pin mux defintions for CPSW switch   Ilya Yanok
    • [U-Boot] [PATCH v3 4/8] am335x_evm: read the on-board EEPROM   Ilya Yanok
• [U-Boot] powerdown can't work (mx28)   alex
  • [U-Boot] powerdown can't work (mx28)   Marek Vasut
    • [U-Boot] powerdown can't work (mx28)   alex
      • [U-Boot] powerdown can't work (mx28)   alex
    • [U-Boot] Query on S3C2412   Chander Kashyap
      • [U-Boot] [PATCH 1/2] GPIO: pca953x: fix spelling in help   Laurence Withers
      • [U-Boot] [PATCH 2/2] GPIO: pca953x: fix error reporting   Laurence Withers
• [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL   Lauri Hintsala
  • [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL   Lauri Hintsala
    • [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL   Marek Vasut
      • [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL   Lauri Hintsala
      • [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL   Marek Vasut
    • [U-Boot] [U-BOOT]: Add support for numonyx spi flash.   jagan
  • [U-Boot] Binary file header   Thiago De Quadros
    • [U-Boot] [PATCH] powerpc/85xx: use CONFIG_SYS_FSL_PCIE_COMPAT macro when setting the PCI LIODNs   Timur Tabi
    • [U-Boot] [PATCH 0/4] arm: rmobile: kzm9g: update   Tetsuyuki Kobayshi
    • [U-Boot] [PATCH 1/4] arm: rmobile: kzm9g: add NFS_TIMEOUT in config file   Tetsuyuki Kobayshi
    • [U-Boot] [PATCH 1/4] arm: rmobile: kzm9g: add NFS_TIMEOUT in config file   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/4] arm: rmobile: kzm9g: remove unrelated config   Tetsuyuki Kobayshi
    • [U-Boot] [PATCH 2/4] arm: rmobile: kzm9g: remove unrelated config   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 3/4] arm: rmobile: kzm9g: fix CPU info   Tetsuyuki Kobayshi
    • [U-Boot] [PATCH 3/4] arm: rmobile: kzm9g: fix CPU info   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 4/4] arm: rmobile: kzm9g: separate cpu_rev to integer and fraction   Tetsuyuki Kobayshi
    • [U-Boot] [PATCH 4/4] arm: rmobile: kzm9g: separate cpu_rev to integer and fraction   Nobuhiro Iwamatsu
• [U-Boot] bdi3000 configurtio file for mpc8308RDB   Avner Flesch
  • [U-Boot] Board-specific commands unintentionally linked into SPL?   Tyler Olmstead
    • [U-Boot] Board-specific commands unintentionally linked into SPL?   Christian Riesch
    • [U-Boot] Board-specific commands unintentionally linked into SPL?   Tyler Olmstead
    • [U-Boot] Board-specific commands unintentionally linked into SPL?   Aneesh V
    • [U-Boot] Board-specific commands unintentionally linked into SPL?   Christian Riesch
    • [U-Boot] Board-specific commands unintentionally linked into SPL?   Lad, Prabhakar
• [U-Boot] bdi3000 configurtio file for mpc8308RDB   Wolfgang Denk
  • [U-Boot] bdi3000 configurtio file for mpc8308RDB   David Hawkins
    • [U-Boot] bdi3000 configurtio file for mpc8308RDB   Kim Phillips
      • [U-Boot] bdi3000 configurtio file for mpc8308RDB   David Hawkins
    • [U-Boot] bdi3000 configurtio file for mpc8308RDB   Wolfgang Denk
      • [U-Boot] bdi3000 configurtio file for mpc8308RDB   David Hawkins
      • [U-Boot] bdi3000 configurtio file for mpc8308RDB   Wolfgang Denk
      • [U-Boot] bdi3000 configurtio file for mpc8308RDB   David Hawkins
• [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Bill
  • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Fabio Estevam
    • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Bill
      • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Fabio Estevam
      • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Bill
      • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Fabio Estevam
      • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Fabio Estevam
      • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Bill
      • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Fabio Estevam
      • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Bill
      • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Fabio Estevam
      • [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG   Bill
  • [HACK] sabresd: add ethernet support   Kim Phillips
    • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Jim Shimer
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Benoît Thébaudeau
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Jim Shimer
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Marek Vasut
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Benoît Thébaudeau
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Marek Vasut
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Benoît Thébaudeau
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Jim Shimer
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Marek Vasut
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Jim Shimer
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Marek Vasut
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Benoît Thébaudeau
      • [U-Boot] usb_stor_BBB_transport 5 ms delay - performance   Marek Vasut
• [U-Boot] List of offending drivers   Marek Vasut
  • [U-Boot] [U-Boot-DM] List of offending drivers   Graeme Russ
  • [U-Boot] [U-Boot-DM] List of offending drivers   Wolfgang Denk
    • [U-Boot] [U-Boot-DM] List of offending drivers   Marek Vasut
      • [U-Boot] [U-Boot-DM] List of offending drivers   Wolfgang Denk
    • [U-Boot] [U-Boot-DM] List of offending drivers   Mike Frysinger
  • [U-Boot] List of offending drivers   Lukasz Majewski
    • [U-Boot] List of offending drivers   Marek Vasut
      • [U-Boot] List of offending drivers   Igor Grinberg
• [U-Boot] [U-Boot-DM] List of offending drivers   Marek Vasut
  • [U-Boot] [U-Boot-DM] List of offending drivers   Graeme Russ
  • [U-Boot] [U-Boot-DM] List of offending drivers   Marek Vasut
  • [U-Boot] [U-Boot-DM] List of offending drivers   Graeme Russ
  • [U-Boot] [U-Boot-DM] List of offending drivers   Marek Vasut
• [U-Boot] [PATCH v3]: video: support exynos fimd driver for various exynos series   Donghwa Lee
• [U-Boot] [PATCH v2 0/4] mmc: sdhci: fixed some problems for Exynos   Jaehoon Chung
• [U-Boot] [PATCH v2 1/4] mmc: s5p_sdhci: set the SDHCI_QUIRK_BROKEN_R1B   Jaehoon Chung
• [U-Boot] [PATCH v2 2/4] mmc: s5p_mmc: fixed wrong function argument   Jaehoon Chung
• [U-Boot] [PATCH v2 3/4] mmc: s5p_sdhci: add the set_mmc_clk for cmu control   Jaehoon Chung
• [U-Boot] [PATCH v2 4/4] mmc: sdhci: add the udelay for completed post-request   Jaehoon Chung
• [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
  • [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Marek Vasut
    • [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
      • [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Marek Vasut
      • [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
      • [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Marek Vasut
      • [U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Add LIBFDT support   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH 2/2] arm: rmobile: kzm9g: remove unrelated config   Nobuhiro Iwamatsu
      • [U-Boot] Cosmetic doc typo fixes to the kwbimage feature docs   Karl O. Pinc
      • [U-Boot] [PATCH] Cosmetic doc typo fixes to the kwbimage feature docs   Karl O. Pinc
      • [U-Boot] Cosmetic doc typo fixes to the kwbimage feature docs   Karl O. Pinc
      • [U-Boot] Cosmetic doc typo fixes to the kwbimage feature docs   Prafulla Wadaskar
• [U-Boot] U-Boot on the POGO-E02   Karl O. Pinc
  • [U-Boot] U-Boot on the POGO-E02   Prafulla Wadaskar
    • [U-Boot] U-Boot on the POGO-E02   Karl O. Pinc
  • [U-Boot] U-Boot on the POGO-E02   Wolfgang Denk
• [U-Boot] [STATUS] v2012.07-rc3 is out - release date July 30   Wolfgang Denk
  • [U-Boot] [PATCH] Makefile: avoid "Generating asm-offsets.h" message with "-s"   Wolfgang Denk
  • [U-Boot] [PATCH] Makefile: avoid "Generating asm-offsets.h" message with "-s"   Wolfgang Denk
  • [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration   Linu Cherian
  • [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration   Sughosh Ganu
  • [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration   Sughosh Ganu
  • [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration   Tom Rini
  • [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration   Wolfgang Denk
  • [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands   Lukasz Majewski
  • [U-Boot] [PATCH 1/2] mmc: New abstract function (do_mmcops_safe) for MMC subsystem   Lukasz Majewski
  • [U-Boot] [PATCH 2/2] fat: New abstract function (do_fat_safe) for FAT subsystem   Lukasz Majewski
  • [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands   Wolfgang Denk
  • [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands   Lukasz Majewski
  • [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands   Wolfgang Denk
  • [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands   Marek Vasut
  • [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands   Wolfgang Denk
  • [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands   Marek Vasut
  • [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands   Lukasz Majewski
  • [U-Boot] [PATCH v2] i.MX28: bug fixes in PMU configuration code   Stathis Voukelatos
    • [U-Boot] [PATCH v2] i.MX28: bug fixes in PMU configuration code   Marek Vasut
    • [U-Boot] [PATCH v2] i.MX28: bug fixes in PMU configuration code   Stefano Babic
• [U-Boot] Strange / Unreadable console output   Markus Hubig
  • [U-Boot] [PATCH] DaVinci DA8xx: fix set_cpu_clk_info()   Laurence Withers
  • [U-Boot] [PATCH] DaVinci DA8xx: fix set_cpu_clk_info()   Prabhakar Lad
  • [U-Boot] [PATCH] DaVinci DA8xx: fix set_cpu_clk_info()   Laurence Withers
  • [U-Boot] ETH RBPTR incorrect mapping for rtx volatile structure   Geoffrey Bugniot
• [U-Boot] cfi: Problem with Intel Strata 28F320 flash   Gerlando Falauto
  • [U-Boot] cfi: Problem with Intel Strata 28F320 flash   Heiko Schocher
    • [U-Boot] cfi: Problem with Intel Strata 28F320 flash   Stefan Roese
• [U-Boot] List of offending drivers   Marek Vasut
  • [U-Boot] List of offending drivers   Igor Grinberg
    • [U-Boot] List of offending drivers   Marek Vasut
      • [U-Boot] [PATCH] km/common: remove printfs for i2c deblocking code   Gerlando Falauto
      • [U-Boot] [PATCH] km/common: remove printfs for i2c deblocking code   Prafulla Wadaskar
      • [U-Boot] [PATCH] km/common: remove printfs for i2c deblocking code   Heiko Schocher
      • [U-Boot] [PATCH] km/common: remove printfs for i2c deblocking code   Prafulla Wadaskar
      • [U-Boot] [PATCH 0/7] km82xx and mgcogeXxx reworking   Gerlando Falauto
      • [U-Boot] [PATCH 2/7] powerpc/82xx: move mgcoge, mgcoge3ne defines to ease subsequent merge   Gerlando Falauto
      • [U-Boot] [PATCH 2/7] powerpc/82xx: move mgcoge, mgcoge3ne defines to ease subsequent merge   Wolfgang Denk
      • [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h   Gerlando Falauto
      • [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h   Wolfgang Denk
      • [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h   Gerlando Falauto
      • [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h   Wolfgang Denk
      • [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h   Gerlando Falauto
      • [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h   Wolfgang Denk
      • [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h   Gerlando Falauto
      • [U-Boot] [PATCH v2 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h   Gerlando Falauto
      • [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h   Wolfgang Denk
      • [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h   Gerlando Falauto
      • [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h   Wolfgang Denk
      • [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h   Gerlando Falauto
      • [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h   Wolfgang Denk
      • [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h   Wolfgang Denk
      • [U-Boot] [PATCH 5/7] powerpc/82xx: add SDRAM detection for km82xx   Gerlando Falauto
      • [U-Boot] [PATCH 5/7] powerpc/82xx: add SDRAM detection for km82xx   Wolfgang Denk
      • [U-Boot] [PATCH 6/7] powerpc/82xx: use SDRAM detection for mgcoge2ne   Gerlando Falauto
      • [U-Boot] [PATCH 6/7] powerpc/82xx: use SDRAM detection for mgcoge2ne   Wolfgang Denk
      • [U-Boot] [PATCH 7/7] powerpc/82xx: adapt SDRAM settings for mgcoge3ne   Gerlando Falauto
      • [U-Boot] [PATCH 7/7] powerpc/82xx: adapt SDRAM settings for mgcoge3ne   Wolfgang Denk
      • [U-Boot] [PATCH 1/7] powerpc/82xx: remove unused define for mgcoge3ne   Gerlando Falauto
      • [U-Boot] [PATCH 1/7] powerpc/82xx: remove unused define for mgcoge3ne   Wolfgang Denk
      • [U-Boot] [PATCH 1/5] pxa255: Add UDC registers definitions   Łukasz Dałek
      • [U-Boot] [PATCH 2/5] drivers/usb/gadget/Makefile: Add UDC ACM and Ether   Łukasz Dałek
      • [U-Boot] [PATCH 3/5] pxa255: Add USB CDC ACM driver   Łukasz Dałek
      • [U-Boot] [PATCH 4/5] pxa255: Add USB Ether driver   Łukasz Dałek
      • [U-Boot] [PATCH 5/5] usbether: Fixed bug when using with PXA25X chips   Łukasz Dałek
      • [U-Boot] [PATCH 1/3] dm: sparc: net: Fixup greth compile warnings   Marek Vasut
      • [U-Boot] [PATCH 3/3] dm: sparc: Fixup the compile warnings in sparc code   Marek Vasut
      • [U-Boot] [PATCH 2/3] dm: sparc: common: Fixup cmd_bdinfo warnings   Marek Vasut
• [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Fabio Estevam
  • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Marek Vasut
    • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Fabio Estevam
      • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Marek Vasut
      • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Fabio Estevam
      • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Wolfgang Denk
      • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Fabio Estevam
      • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Wolfgang Denk
  • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Marek Vasut
  • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Marek Vasut
  • [U-Boot] mx28evk kernel does not boot with 2012.07-rc3   Fabio Estevam
    • [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux   Marek Vasut
    • [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux   Mike Frysinger
    • [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux   Marek Vasut
    • [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux   Mike Frysinger
    • [U-Boot] [PATCH V2] dm: mips: Import libgcc components from Linux   Marek Vasut
    • [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux   Wolfgang Denk
    • [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux   Marek Vasut
    • [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux   Daniel Schwierzeck
    • [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux   Wolfgang Denk
    • [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux   Marek Vasut
    • [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux   Marek Vasut
    • [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux   Wolfgang Denk
    • [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux   Wolfgang Denk
    • [U-Boot] [PATCH 1/3] dm: mips: Fix lb60 WDT control   Marek Vasut
    • [U-Boot] [PATCH 2/3] dm: mips: Fix lb60 timer code   Marek Vasut
    • [U-Boot] [PATCH 3/3] dm: mips: Fix warnings in lb60 board   Marek Vasut
    • [U-Boot] [PATCH 1/3] dm: mips: Fix lb60 WDT control   Marek Vasut
    • [U-Boot] [PATCH 1/3] dm: mips: Fix lb60 WDT control   Daniel Schwierzeck
    • [U-Boot] [PATCH] dm: ppc: Rename CONFIG_SYS_CPU in BC3450 board   Marek Vasut
    • [U-Boot] [U-Boot-DM] [PATCH] dm: ppc: Rename CONFIG_SYS_CPU in BC3450 board   Wolfgang Denk
    • [U-Boot] [U-Boot-DM] [PATCH] dm: ppc: Rename CONFIG_SYS_CPU in BC3450 board   Marek Vasut
    • [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver   Marek Vasut
    • [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver   Prafulla Wadaskar
    • [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver   Marek Vasut
    • [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver   Joe Hershberger
    • [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver   Marek Vasut
    • [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx   Marek Vasut
    • [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx   Wolfgang Denk
    • [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx   Marek Vasut
    • [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx   Wolfgang Denk
    • [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx   Marek Vasut
    • [U-Boot] [PATCH V2] dm: ppc: Fixup cpu.c warning in mpc8xx   Marek Vasut
    • [U-Boot] [PATCH V2] dm: ppc: Fixup cpu.c warning in mpc8xx   Wolfgang Denk
    • [U-Boot] [PATCH V2] dm: ppc: Fixup cpu.c warning in mpc8xx   Wolfgang Denk
    • [U-Boot] [PATCH] MIPS: fix renaming of inca-swap-bytes to xway-swap-bytes   daniel.schwierzeck at gmail.com
    • [U-Boot] Pull request: u-boot-mips/master for v2012.07   daniel.schwierzeck at gmail.com
    • [U-Boot] Pull request: u-boot-mips/master for v2012.07   Wolfgang Denk
    • [U-Boot] [PATCH] image/FIT: Ramdisk Load, Entry address and OS tag inclusion   Jagan
    • [U-Boot] [PATCH] image/FIT: Add ramdisk load, entry address and OS tag inclusion   Jagan
    • [U-Boot] V3: S3c64xx: Switch all I/O to use readl/writel functio and Clear variable   Zhong Hongbo
    • [U-Boot] [V3 01/15] smdk6400: Move smdk6400 board from Makefile to boards.cfg   Zhong Hongbo
    • [U-Boot] [V3 02/15] S3C64XX: Switch to use readl/writel to operate nand flash   Zhong Hongbo
    • [U-Boot] [V3 03/15] S3C64XX: Use readl/writel to operate uart   Zhong Hongbo
    • [U-Boot] [V3 04/15] S3C64XX: add pwm for s3c64xx support   Zhong Hongbo
    • [U-Boot] [V3 05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer   Zhong Hongbo
    • [U-Boot] [V3 06/15] S3C64xx: mov cpu_init.S to the board directory   Zhong Hongbo
    • [U-Boot] [V3 07/15] S3C6400: Delete nand_spl for S3C6400   Zhong Hongbo
    • [U-Boot] [V3 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash   Zhong Hongbo
    • [U-Boot] [V3 09/15] arm1176: Fixed No relocation.   Zhong Hongbo
    • [U-Boot] [V3 09/15] arm1176: Fixed No relocation.   Albert ARIBAUD
    • [U-Boot] [V3 09/15] arm1176: Fixed No relocation.   Zhong Hongbo
    • [U-Boot] [V3 09/15] arm1176: Fixed No relocation.   Zhong Hongbo
    • [U-Boot] [V3 10/15] S3C64XX: Change SROM init to use read/write operation   Zhong Hongbo
    • [U-Boot] [V3 11/15] S3C64XX: Switch to use read/writel to operation clock system   Zhong Hongbo
    • [U-Boot] [V3 12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable.   Zhong Hongbo
    • [U-Boot] [V3 13/15] S3C6400: clear memory init variable   Zhong Hongbo
    • [U-Boot] [V3 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board   Zhong Hongbo
    • [U-Boot] [V3 15/15] S3C6400: Remove the unused variable for S3C6400   Zhong Hongbo
    • [U-Boot] [u-boot-arm/next RESEND PATCH 0/3] OMAP3: igep00x0: add nand flash and SPL support   Javier Martinez Canillas
    • [U-Boot] [u-boot-arm/next RESEND PATCH 1/3] OMAP3: igep00x0: Add config option to choose flash storage memory   Javier Martinez Canillas
    • [U-Boot] [u-boot-arm/next RESEND PATCH 2/3] OMAP3: mem: Add Numonyx OneNAND 200MHz timing information   Javier Martinez Canillas
    • [U-Boot] [u-boot-arm/next RESEND PATCH 3/3] OMAP3: igep00x0: add SPL support for IGEP-based boards   Javier Martinez Canillas
    • [U-Boot] [u-boot-arm/next RESEND PATCH 0/3] OMAP3: igep00x0: add nand flash and SPL support   Tom Rini
    • [U-Boot] [u-boot-arm/next RESEND PATCH 0/3] OMAP3: igep00x0: add nand flash and SPL support   Javier Martinez Canillas
• [U-Boot] dwc_ahsata vs ahci   Pavel Herrmann
  • [U-Boot] dwc_ahsata vs ahci   Stefano Babic
    • [U-Boot] dwc_ahsata vs ahci   Lv Terry-R65388
    • [U-Boot] [U-Boot-DM] dwc_ahsata vs ahci   Marek Vasut
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Marek Vasut
    • [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime   Marek Vasut
    • [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime   Wolfgang Denk
    • [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime   Marek Vasut
    • [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime   Wolfgang Denk
    • [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime   Marek Vasut
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Marek Vasut
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Marek Vasut
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Mike Frysinger
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Marek Vasut
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Mike Frysinger
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Marek Vasut
    • [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function   Mike Frysinger
  • [U-Boot] early_malloc() vs. enable_caches()   Tomas Hlavacek
    • [U-Boot] early_malloc() vs. enable_caches()   Albert ARIBAUD
      • [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()   Marek Vasut
    • [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()   Graeme Russ
      • [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()   Marek Vasut
      • [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()   Tomas Hlavacek
      • [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()   Graeme Russ
• [U-Boot] [U-Boot-DM] [PATCH 1/1] early_malloc() introduced to ARM architecture   Marek Vasut
  • [U-Boot] [U-Boot-DM] [PATCH 1/1] early_malloc() introduced to ARM architecture   Tomas Hlavacek
    • [U-Boot] [U-Boot-DM] [PATCH 1/1] early_malloc() introduced to ARM architecture   Marek Vasut
      • [U-Boot] [PATCH v4] MX28: extend print_cpuinfo() to use chip information   Otavio Salvador
      • [U-Boot] [PATCH v4] MX28: extend print_cpuinfo() to use chip information   Stefano Babic
      • [U-Boot] [PATCH v4] MX28: extend print_cpuinfo() to use chip information   Stefano Babic
      • [U-Boot] [PATCH v4] MX28: extend print_cpuinfo() to use chip information   Otavio Salvador
      • [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization   Otavio Salvador
      • [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller   Stephan Linz
      • [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller   Michal Simek
      • [U-Boot] [PATCH 2/2] microblaze: Wire up SPI driver   Stephan Linz
      • [U-Boot] [PATCH 2/2] microblaze: Wire up SPI driver   Michal Simek
      • [U-Boot] [RFC PATCH 0/5] Rework for mxs SoC family support   Otavio Salvador
      • [U-Boot] [RFC PATCH 1/5] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs   Otavio Salvador
      • [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix   Otavio Salvador
      • [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix   Marek Vasut
      • [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix   Stefano Babic
      • [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix   Marek Vasut
      • [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix   Otavio Salvador
      • [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix   Marek Vasut
      • [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix   Otavio Salvador
      • [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix   Marek Vasut
      • [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix   Otavio Salvador
      • [U-Boot] [RFC PATCH 4/5] mxs: Reowork SPL to use 'mxs' prefix for methods   Otavio Salvador
      • [U-Boot] [RFC PATCH 5/5] mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs   Otavio Salvador
• [U-Boot] bdi3000 configurtio file for mpc8308RDB   Wolfgang Denk
• [U-Boot] building u-boot inside buildroot   Sabri Altunbas
  • [U-Boot] building u-boot inside buildroot   Karl O. Pinc
    • [U-Boot] building u-boot inside buildroot   Prafulla Wadaskar
    • [U-Boot] building u-boot inside buildroot   Karl O. Pinc
  • [U-Boot] building u-boot inside buildroot   Mike Frysinger
• [U-Boot] [PATCH] doc: cleanup - move board READMEs into respective board directories   Wolfgang Denk
  • [U-Boot] [PATCH 0/1] versatile/vexpress: board configs: Use buffered writes on Flash   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH 1/1] versatile: board configs: Use buffered writes on flash   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support   Simon Glass
  • [U-Boot] [PATCH v4 1/6] nand: Try to align the default buffers   Simon Glass
  • [U-Boot] [PATCH v4 1/6] nand: Try to align the default buffers   Scott Wood
  • [U-Boot] [PATCH v4 2/6] tegra: Add NAND support to funcmux   Simon Glass
  • [U-Boot] [PATCH v4 3/6] tegra: fdt: Add NAND controller binding and definitions   Simon Glass
  • [U-Boot] [PATCH v4 3/6] tegra: fdt: Add NAND controller binding and definitions   Scott Wood
  • [U-Boot] [PATCH v4 3/6] tegra: fdt: Add NAND controller binding and definitions   Simon Glass
  • [U-Boot] [PATCH v4 4/6] tegra: fdt: Add NAND definitions to fdt   Simon Glass
  • [U-Boot] [PATCH v4 4/6] tegra: fdt: Add NAND definitions to fdt   Scott Wood
  • [U-Boot] [PATCH v4 4/6] tegra: fdt: Add NAND definitions to fdt   Simon Glass
  • [U-Boot] [PATCH v4 5/6] tegra: nand: Add Tegra NAND driver   Simon Glass
  • [U-Boot] [PATCH v4 5/6] tegra: nand: Add Tegra NAND driver   Scott Wood
  • [U-Boot] [PATCH v4 6/6] tegra: Enable NAND on Seaboard   Simon Glass
  • [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support   Tom Warren
  • [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support   Stephen Warren
  • [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support   Tom Warren
  • [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support   Thierry Reding
  • [U-Boot] multichannel mmc strangeness on omap   Steve Sakoman
    • [U-Boot] multichannel mmc strangeness on omap   Tom Rini
    • [U-Boot] multichannel mmc strangeness on omap   Steve Sakoman
  • [PATCH] test 1   Wolfgang Denk
    • [U-Boot] [PATCH 1/3] DaVinci DA8xx: tidy up clock ID definition   Laurence Withers
    • [U-Boot] [PATCH 2/3] DaVinci DA850: UART2 clock ID comes from ASYNC3   Laurence Withers
    • [U-Boot] [PATCH 3/3] DaVinci DA8xx: replace magic number for DDR speed   Laurence Withers
    • [U-Boot] [PATCH 3/3] DaVinci DA8xx: replace magic number for DDR speed   Laurence Withers
    • [U-Boot] [PATCH 3/3] DaVinci DA8xx: replace magic number for DDR speed   Tom Rini
    • [U-Boot] [PATCH 0/17]: Improve am33xx support   Tom Rini
    • [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function   Tom Rini
    • [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function   R, Sricharan
    • [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function   Tom Rini
    • [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function   R, Sricharan
    • [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function   Tom Rini
    • [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function   R, Sricharan
    • [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function   Tom Rini
    • [U-Boot] [PATCH 02/17] am335x_evm: Update config for common usage   Tom Rini
    • [U-Boot] [PATCH 03/17] am33xx: Remove DMM_BASE define   Tom Rini
    • [U-Boot] [PATCH 04/17] am33xx: Convert to using <asm/emif.h> to describe the EMIF   Tom Rini
    • [U-Boot] [PATCH 05/17] am33xx: Remove extra check in enable_ddr_clocks   Tom Rini
    • [U-Boot] [PATCH 06/17] am33xx: Bugfix to config_sdram()   Tom Rini
    • [U-Boot] [PATCH 07/17] am33xx: Rework DDR2 EMIF initalization slightly   Tom Rini
    • [U-Boot] [PATCH 08/17] am33xx: Make config_cmd_ctrl / config_ddr_data take const structs   Tom Rini
    • [U-Boot] [PATCH 09/17] am33xx: Pass to config_ddr the type of memory that is connected   Tom Rini
    • [U-Boot] [PATCH 10/17] am33xx: Move the call to ddr_pll_config, make it take the frequency   Tom Rini
    • [U-Boot] [PATCH 11/17] am33xx: Clean up unused DDR defines, prefix more with 'DDR2'   Tom Rini
    • [U-Boot] [PATCH 12/17] am335x: ddr_defs: Update EMIF parameters   Tom Rini
    • [U-Boot] [PATCH 13/17] am33xx: Document what we're doing with ddrctrl->ddrckectrl   Tom Rini
    • [U-Boot] [PATCH 14/17] am33xx: Turn a number of 'int' functions to 'void'   Tom Rini
    • [U-Boot] [PATCH 15/17] am33xx: Use emif_regs struct for storing initialization values   Tom Rini
    • [U-Boot] [PATCH 16/17] am33xx: Rework config_io_ctrl slightly   Tom Rini
    • [U-Boot] [PATCH 17/17] am33xx: Do not touch 'ratio1' fields   Tom Rini
    • [U-Boot] [PATCH 18/17] am33xx: Correct and clean up ddr_regs struct   Tom Rini
    • [U-Boot] [PATCH] tegra: enable NAND on Harmony   Stephen Warren
    • [U-Boot] [PATCH] tegra: enable NAND on Harmony   Simon Glass
    • [U-Boot] [PATCH] tegra: enable NAND on Harmony   Thierry Reding
    • [U-Boot] [PATCH] env_nand: align NAND buffers   Stephen Warren
    • [U-Boot] [PATCH] env_nand: align NAND buffers   Simon Glass
    • [U-Boot] [PATCH] env_nand: align NAND buffers   Wolfgang Denk
    • [U-Boot] [PATCH] env_nand: align NAND buffers   Simon Glass
    • [U-Boot] [PATCH] env_nand: align NAND buffers   Scott Wood
    • [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.   Markus Hubig
• [U-Boot] usb_test_unit_ready called every block read - performance   Jim Shimer
  • [U-Boot] usb_test_unit_ready called every block read - performance   Marek Vasut
    • [U-Boot] usb_test_unit_ready called every block read - performance   Jim Shimer
• [U-Boot] [STATUS] v2012.07 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
  • [U-Boot] [PATCH] lsxl: support power switch   Michael Walle
  • [U-Boot] [PATCH] lsxl: support power switch   Prafulla Wadaskar
  • [U-Boot] [PATCH] lsxl: support power switch   Michael Walle
  • [U-Boot] [PATCH] lsxl: support power switch   Prafulla Wadaskar
  • [U-Boot] [PATCH] lsxl: support power switch   Michael Walle
  • [U-Boot] [PATCH 1/3] mmc: detect boot sectors using EXT_CSD_BOOT_MULT too   Stephen Warren
  • [U-Boot] [PATCH 1/3] mmc: detect boot sectors using EXT_CSD_BOOT_MULT too   Stephen Warren
  • [U-Boot] [PATCH 2/3] env_mmc: allow environment to be in an eMMC partition   Stephen Warren
  • [U-Boot] [PATCH 3/3] tegra: put eMMC environment into the boot sectors   Stephen Warren
  • [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320   Jamie Lentin
  • [U-Boot] [PATCH 1/2] kirkwood: Rename dns325 to dnskw   Jamie Lentin
  • [U-Boot] [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320   Jamie Lentin
  • [U-Boot] [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320   Prafulla Wadaskar
  • [U-Boot] [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320   Jamie Lentin
  • [U-Boot] [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320   Stefan Herbrechtsmeier
  • [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320   Prafulla Wadaskar
  • [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320   Jamie Lentin
  • [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320   Prafulla Wadaskar
• [U-Boot] usb_test_unit_ready called every block read - performance   Marek Vasut
  • [U-Boot] usb_test_unit_ready called every block read - performance   Jim Shimer
    • [U-Boot] usb_test_unit_ready called every block read - performance   Wolfgang Denk
• [U-Boot] Help with u-boot   Андрей Борисович
• [U-Boot] Pull request - microblaze   Michal Simek
  • [U-Boot] Pull request - microblaze   Wolfgang Denk
• [U-Boot] i.MX(6) dcache status?   Dirk Behme
  • [U-Boot] i.MX(6) dcache status?   Dirk Behme
    • [U-Boot] i.MX(6) dcache status?   Marek Vasut
      • [U-Boot] [PATCH 1/2] cmd_nand: dump: Align data and OOB buffers   Thierry Reding
      • [U-Boot] [PATCH 2/2] tegra: Enable NAND on TEC   Thierry Reding
      • [U-Boot] [PATCH 2/2] tegra: Enable NAND on TEC   Stephen Warren
      • [U-Boot] [PATCH 2/2] tegra: Enable NAND on TEC   Thierry Reding
      • [U-Boot] [PATCH 1/2] cmd_nand: dump: Align data and OOB buffers   Simon Glass
      • [U-Boot] [PATCH 1/2] cmd_nand: dump: Align data and OOB buffers   Stephen Warren
      • [U-Boot] [PATCH 1/2] cmd_nand: dump: Align data and OOB buffers   Scott Wood
      • [U-Boot] [PATCH v3 1/7] dfu:usb: Support for g_dnl composite download gadget.   Lukasz Majewski
      • [U-Boot] [PATCH 1/2] add ST PSD4256G6V to table of supported legacy flashs   Mike Frysinger
      • [U-Boot] [PATCH 2/2] Blackfin: bf533-ezkit: convert to CFI flash driver   Mike Frysinger
      • [U-Boot] [PATCH 1/2] add ST PSD4256G6V to table of supported legacy flashs   Stefan Roese
      • [U-Boot] [PATCH 1/2] add ST PSD4256G6V to table of supported legacy flashs   Mike Frysinger
  • [U-Boot] [PATCH] remove usb_test_unit_ready from usb_stor_read+usb_stor_write   James Shimer
• [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [i2c] Pull request   Wolfgang Denk
    • [U-Boot] [PATCH] fix out of tree building with kallsyms   Mike Frysinger
• [U-Boot] [PATCH 9/9] mx6qsabrelite: Add splaschscreen support   Dirk Behme
  • [U-Boot] [PATCH v2 0/4] DaVinci DA8xx: tidy up clock IDs   Laurence Withers
  • [U-Boot] [PATCH v2 1/4] DaVinci DA8xx: tidy up clock ID definition   Laurence Withers
  • [U-Boot] [PATCH v2 2/4] DaVinci DA850: UART2 clock ID comes from ASYNC3   Laurence Withers
  • [U-Boot] [PATCH v2 3/4] DaVinci DA8xx: replace magic number for DDR speed   Laurence Withers
  • [U-Boot] [PATCH v2 4/4] DaVinci DA8xx: fix set_cpu_clk_info()   Laurence Withers
  • [U-Boot] [PATCH] Blackfin: adjust asm constraints with NMI workaround   Mike Frysinger
  • [U-Boot] [PATCH] Blackfin: initcode: mark uncommon code paths as unlikely   Mike Frysinger
  • [U-Boot] [PATCH 0/8] EXYNOS5: Enable SPI support   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/8] SPI: Add W25Q32 to Winbond SPI flash table   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/8] EXYNOS: Add clock for SPI.   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/8] EXYNOS5: Add base address for SPI.   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/8] SPI: Add SPI slave mode flag   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/8] SPI: Add SPI slave mode flag   Mike Frysinger
  • [U-Boot] [PATCH 6/8] SPI: Add SPI Driver for EXYNOS.   Rajeshwari Shinde
  • [U-Boot] [PATCH 7/8] EXYNOS5: Enable SPI   Rajeshwari Shinde
  • [U-Boot] [PATCH 8/8] EXYNOS5: Enable SPI booting.   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/8] EXYNOS5: Add pinmux support for SPI   Rajeshwari Shinde
  • [U-Boot] [PATCH 0/8 V2] EXYNOS5: Enable SPI support   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/8 V2] EXYNOS5: Add pinmux support for SPI   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/8 V2] SPI: Add W25Q32 to Winbond SPI flash table   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/8 V2] EXYNOS: Add clock for SPI.   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/8 V2] EXYNOS5: Add base address for SPI.   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/8] SPI: Add SPI slave mode flag   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/8 V2] SPI: Add SPI Driver for EXYNOS.   Rajeshwari Shinde
  • [U-Boot] [PATCH 7/8 V2] EXYNOS5: Enable SPI   Rajeshwari Shinde
  • [U-Boot] [PATCH 8/8 V2] EXYNOS5: Enable SPI booting.   Rajeshwari Shinde
  • [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Mike Frysinger
  • [U-Boot] Pull request u-boot-blackfin.git (sf branch)   Wolfgang Denk
• [U-Boot] early_malloc outline   Tomas Hlavacek
  • [U-Boot] early_malloc outline   Wolfgang Denk
    • [U-Boot] [PATCH] tegra: harmony: fix comments for environment config options   Stephen Warren
    • [U-Boot] [PATCH] tegra: harmony: fix comments for environment config options   Tom Warren
    • [U-Boot] [PATCH] tegra: harmony: fix comments for environment config options   Thierry Reding
• [U-Boot] [PATCH] env_nand: align NAND buffers   Scott Wood
• [U-Boot] [PATCH v3 0/2] Add GPIO driver for BCM2835 SoC   Vikram Narayanan
  • [U-Boot] [PATCH v3 1/2] gpio: bcm2835: Add GPIO driver   Vikram Narayanan
  • [U-Boot] [PATCH v3 2/2] rbpi: Add BCM2835 GPIO driver for raspberry pi   Vikram Narayanan
    • [U-Boot] [PATCH] mx28evk: Turn on caches   Fabio Estevam
    • [U-Boot] [PATCH] mx28evk: Turn on caches   stefano babic
• [U-Boot] multiple definition of `reloc_dst'   Sabri Altunbas
• [U-Boot] mx53loco hangs on 2012.07   Fabio Estevam
  • [U-Boot] mx53loco hangs on 2012.07   Robert Nelson
    • [U-Boot] mx53loco hangs on 2012.07   Fabio Estevam
• [U-Boot] multiple definition of `reloc_dst'   Sabri Altunbas
  • [U-Boot] [PATCH 00/11] Support for ST-Ericsson snowball board   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 02/11] u8500: Moving prcmu to cpu directory   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 03/11] snowball: Adding architecture dependent initialisation   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 04/11] snowball: Adding CPU clock initialisation   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 06/11] snowball: applying power to LAN and GBF controllers   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 07/11] u8500: Moving processor-specific functions to cpu area.   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 08/11] u8500: Enabling power to MMC device on AB8500 V2   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 10/11] armv7: Adding cpu specific cache managmenent   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 11/11] snowball: Adding board specific cache cleanup routine   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   Fabio Estevam
  • [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   Fabio Estevam
  • [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   Wolfgang Denk
  • [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   stefano babic
  • [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   Wolfgang Denk
  • [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   stefano babic
  • [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   Wolfgang Denk
  • [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT   stefano babic
  • [U-Boot] [PATCH 0/5]: Further update am33xx support   Tom Rini
  • [U-Boot] [PATCH 3/5] am33xx: Add support for TI AM335x StarterKit EVM   Tom Rini
  • [U-Boot] [PATCH 5/5] am33xx: Rework pinmux functions   Tom Rini
  • [U-Boot] [PATCH 1/5] am33xx: Enable gpio0 clock   Tom Rini
  • [U-Boot] [PATCH 2/5] am33xx: Remove board/ti/am335x/evm.c   Tom Rini
  • [U-Boot] [PATCH 4/5] am33xx evm: Add CONFIG_CMD_EEPROM and related   Tom Rini