October 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Oct 1 00:28:38 CEST 2016
Ending: Mon Oct 31 22:48:32 CET 2016
Messages: 2907

• [U-Boot] [PATCH v2 3/6] toradex: config block handling   Stefan Agner
• [U-Boot] U-Boot DFU test and Ctrl+C   Tom Rini
• [U-Boot] [PATCH v5 6/6] configs: am57xx_evm_defconfig: Enable CMD_REG option   Tom Rini
• [U-Boot] [PATCH v6 6/6] configs: am57xx_evm_defconfig: Enable CMD_REG option   Tom Rini
  • [U-Boot] [PATCH v6 6/6] configs: am57xx_evm_defconfig: Enable CMD_REG option   Simon Glass
• [U-Boot] [RFC] Rearrange CONFIG_* macros   Tom Rini
  • [U-Boot] [RFC] Rearrange CONFIG_* macros   Scott Wood
• [U-Boot] [PATCH v3 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig   Tom Rini
  • [U-Boot] [PATCH v3 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig   Soeren Moch
  • [U-Boot] [PATCH v3 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig   Simon Glass
• [U-Boot] [PATCH v3 04/29] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig   Tom Rini
• [U-Boot] [PATCH v3 28/29] Convert CONFIG_USB_KEYBOARD to Kconfig   Tom Rini
• [U-Boot] [PATCH v3 29/29] Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig   Tom Rini
• [U-Boot] [PATCH v3 02/29] Convert SILENT_CONSOLE options to Kconfig   Tom Rini
• [U-Boot] [PATCH v3 08/29] Convert CONFIG_CFB_CONSOLE to Kconfig   Tom Rini
• [U-Boot] [PATCH v3 16/29] Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig   Tom Rini
• [U-Boot] [PATCH v3 27/29] Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig   Tom Rini
• [U-Boot] x86: Booting Linux v4.7+ broken   Yinghai Lu
  • [U-Boot] x86: Booting Linux v4.7+ broken   Stefan Roese
• [U-Boot] is there any issue with creating and using more than one hashtable?   Wolfgang Denk
  • [U-Boot] is there any issue with creating and using more than one hashtable?   Robert P. J. Day
  • [U-Boot] is there any issue with creating and using more than one hashtable?   Robert P. J. Day
    • [U-Boot] is there any issue with creating and using more than one hashtable?   Wolfgang Denk
      • [U-Boot] is there any issue with creating and using more than one hashtable?   Robert P. J. Day
  • [U-Boot] is there any issue with creating and using more than one hashtable?   Robert P. J. Day
    • [U-Boot] is there any issue with creating and using more than one hashtable?   Wolfgang Denk
• [U-Boot] S5PV210 boot problem   nader last
  • [U-Boot] S5PV210 boot problem   smart
• [U-Boot] Please pull u-boot-85xx master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
  • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
    • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Uboot send pull request   Tom Rini
• [U-Boot] [PATCH 00/27] Clean up address mapping functions & CONFIG_SYS_SDRAM_BASE   Paul Burton
  • [U-Boot] [PATCH 01/27] Provide a generic io.h & address mapping functions   Paul Burton
    • [U-Boot] [PATCH 01/27] Provide a generic io.h & address mapping functions   Angelo Dureghello
    • [U-Boot] [PATCH 01/27] Provide a generic io.h & address mapping functions   Simon Glass
  • [U-Boot] [PATCH 02/27] arc: Use asm-generic/io.h   Paul Burton
    • [U-Boot] [PATCH 02/27] arc: Use asm-generic/io.h   Alexey Brodkin
  • [U-Boot] [PATCH 03/27] arm: Use asm-generic/io.h   Paul Burton
    • [U-Boot] [PATCH 03/27] arm: Use asm-generic/io.h   Simon Glass
  • [U-Boot] [PATCH 04/27] blackfin: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH 05/27] m68k: Use asm-generic/io.h   Paul Burton
    • [U-Boot] [PATCH 05/27] m68k: Use asm-generic/io.h   Angelo Dureghello
  • [U-Boot] [PATCH 06/27] microblaze: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH 07/27] nds32: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH 08/27] openrisc: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH 09/27] sh: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH 10/27] sparc: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH 11/27] x86: Use asm-generic/io.h   Paul Burton
    • [U-Boot] [PATCH 11/27] x86: Use asm-generic/io.h   Simon Glass
  • [U-Boot] [PATCH 12/27] xtensa: Use asm-generic/io.h   Paul Burton
    • [U-Boot] [PATCH 12/27] xtensa: Use asm-generic/io.h   Max Filippov
  • [U-Boot] [PATCH 13/27] mips: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH 14/27] mips: Fix map_physmem for cached mappings   Paul Burton
  • [U-Boot] [PATCH 15/27] nios2: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH 16/27] powerpc: Use asm-generic/io.h   Paul Burton
  • [U-Boot] [PATCH 17/27] sandbox: Use asm-generic/io.h   Paul Burton
    • [U-Boot] [PATCH 17/27] sandbox: Use asm-generic/io.h   Simon Glass
    • [U-Boot] [U-Boot,17/27] sandbox: Use asm-generic/io.h   Tom Rini
  • [U-Boot] [PATCH 18/27] board_f: Account for CONFIG_SYS_SDRAM_BASE being physical   Paul Burton
    • [U-Boot] [PATCH 18/27] board_f: Account for CONFIG_SYS_SDRAM_BASE being physical   Simon Glass
  • [U-Boot] [PATCH 19/27] image: Account for CONFIG_SYS_SDRAM_BASE being physical   Paul Burton
    • [U-Boot] [PATCH 19/27] image: Account for CONFIG_SYS_SDRAM_BASE being physical   Simon Glass
  • [U-Boot] [PATCH 20/27] image: Use ram_top, not bi_memsize, in getenv_bootm_size   Paul Burton
    • [U-Boot] [PATCH 20/27] image: Use ram_top, not bi_memsize, in getenv_bootm_size   Simon Glass
  • [U-Boot] [PATCH 21/27] mips: Use ram_top, not bi_memsize, in arch_lmb_reserve   Paul Burton
  • [U-Boot] [PATCH 22/27] mips: Ensure stack is at a virtual address   Paul Burton
  • [U-Boot] [PATCH 23/27] boston: Provide physical CONFIG_SYS_SDRAM_BASE   Paul Burton
  • [U-Boot] [PATCH 24/27] malta: Use a physical CONFIG_SYS_SDRAM_BASE   Paul Burton
  • [U-Boot] [PATCH 25/27] xilfpga: Use a physical CONFIG_SYS_SDRAM_BASE   Paul Burton
  • [U-Boot] [PATCH 26/27] mips: Use a physical CONFIG_SYS_SDRAM_BASE for remaining boards   Paul Burton
  • [U-Boot] [PATCH 27/27] mips: Remove virt_to_phys call on bi_memstart   Paul Burton
  • [U-Boot] [PATCH 00/27] Clean up address mapping functions & CONFIG_SYS_SDRAM_BASE   Masahiro Yamada
    • [U-Boot] [PATCH 00/27] Clean up address mapping functions & CONFIG_SYS_SDRAM_BASE   Paul Burton
• [U-Boot] [PATCH 07/23] pci: Handle MIPS systems with virtual CONFIG_SYS_SDRAM_BASE   Paul Burton
• [U-Boot] [PATCH v2 0/6] efi_loader: implement BS.FreePages()/BS.FreePool, some cleanup   Stefan Brüns
  • [U-Boot] [PATCH v2 0/6] efi_loader: implement BS.FreePages()/BS.FreePool, some cleanup   Stefan Brüns
• [U-Boot] [PATCH v2 1/6] efi_loader: Update description of internal efi_mem_carve_out   Stefan Brüns
• [U-Boot] [PATCH v2 2/6] efi_loader: Fix memory map size check to avoid out-of-bounds access   Stefan Brüns
  • [U-Boot] [PATCH v2 2/6] efi_loader: Fix memory map size check to avoid out-of-bounds access   Alexander Graf
• [U-Boot] [PATCH v2 3/6] efi_loader: Track size of pool allocations to allow freeing   Stefan Brüns
  • [U-Boot] [PATCH v2 3/6] efi_loader: Track size of pool allocations to allow freeing   Alexander Graf
• [U-Boot] [PATCH v2 4/6] efi_loader: Readd freed pages to memory pool   Stefan Brüns
• [U-Boot] [PATCH v2 5/6] efi_loader: Keep memory mapping sorted when splitting an entry   Stefan Brüns
• [U-Boot] [PATCH v2 6/6] efi_loader: Do not leak memory when unlinking a mapping   Stefan Brüns
• [U-Boot] [PATCH 0/5] Fix some trivial issues in sandbox/fs   Stefan Brüns
• [U-Boot] [PATCH 1/5] sandbox/fs: Free memory allocated by os_dirent_ls   Stefan Brüns
  • [U-Boot] [PATCH 1/5] sandbox/fs: Free memory allocated by os_dirent_ls   Simon Glass
    • [U-Boot] [PATCH 1/5] sandbox/fs: Free memory allocated by os_dirent_ls   Simon Glass
• [U-Boot] [PATCH 2/5] sandbox/fs: Make linking of nodes in os_dirent_ls more obvious   Stefan Brüns
  • [U-Boot] [PATCH 2/5] sandbox/fs: Make linking of nodes in os_dirent_ls more obvious   Simon Glass
    • [U-Boot] [PATCH 2/5] sandbox/fs: Make linking of nodes in os_dirent_ls more obvious   Simon Glass
• [U-Boot] [PATCH 3/5] sandbox/fs: Use correct size path name buffer   Stefan Brüns
  • [U-Boot] [PATCH 3/5] sandbox/fs: Use correct size path name buffer   Simon Glass
    • [U-Boot] [PATCH 3/5] sandbox/fs: Use correct size path name buffer   Simon Glass
• [U-Boot] [PATCH 4/5] sandbox/fs: Set correct filetype for unknown filetype   Stefan Brüns
  • [U-Boot] [PATCH 4/5] sandbox/fs: Set correct filetype for unknown filetype   Simon Glass
• [U-Boot] [PATCH 5/5] sandbox/fs: Use readdir instead of deprecated readdir_r   Stefan Brüns
  • [U-Boot] [PATCH 5/5] sandbox/fs: Use readdir instead of deprecated readdir_r   Simon Glass
    • [U-Boot] [PATCH 5/5] sandbox/fs: Use readdir instead of deprecated readdir_r   Simon Glass
• [U-Boot] [PATCH] sandbox: Use the address in readl/writel() functions   Simon Glass
  • [U-Boot] [PATCH] sandbox: Use the address in readl/writel() functions   Simon Glass
• [U-Boot] [PATCH v3 0/3] dm: mmc: Default to DM_MMC_OPS and BLK   Simon Glass
  • [U-Boot] [PATCH v3 1/3] dm: mmc: Support erase   Simon Glass
    • [U-Boot] [PATCH v3 1/3] dm: mmc: Support erase   Simon Glass
  • [U-Boot] [PATCH v3 2/3] dm: blk: Enable CONFIG_BLK if DM_MMC is enabled   Simon Glass
    • [U-Boot] [PATCH v3 2/3] dm: blk: Enable CONFIG_BLK if DM_MMC is enabled   Simon Glass
  • [U-Boot] [PATCH v3 3/3] dm: mmc: Enable DM_MMC_OPS by default with DM_MMC   Simon Glass
    • [U-Boot] [PATCH v3 3/3] dm: mmc: Enable DM_MMC_OPS by default with DM_MMC   Simon Glass
• [U-Boot] [PATCH v3 1/7] efi_loader: Update description of internal efi_mem_carve_out   Stefan Brüns
  • [U-Boot] [PATCH v3 1/7] efi_loader: Update description of internal efi_mem_carve_out   Alexander Graf
  • [U-Boot] [U-Boot, v3, 1/7] efi_loader: Update description of internal efi_mem_carve_out   Alexander Graf
• [U-Boot] [PATCH v3 2/7] efi_loader: Fix memory map size check to avoid out-of-bounds access   Stefan Brüns
  • [U-Boot] [PATCH v3 2/7] efi_loader: Fix memory map size check to avoid out-of-bounds access   Alexander Graf
• [U-Boot] [PATCH v3 3/7] efi_loader: Move efi_allocate_pool implementation to efi_memory.c   Stefan Brüns
  • [U-Boot] [PATCH v3 3/7] efi_loader: Move efi_allocate_pool implementation to efi_memory.c   Alexander Graf
• [U-Boot] [PATCH v3 4/7] efi_loader: Track size of pool allocations to allow freeing   Stefan Brüns
  • [U-Boot] [PATCH v3 4/7] efi_loader: Track size of pool allocations to allow freeing   Alexander Graf
• [U-Boot] [PATCH v3 5/7] efi_loader: Readd freed pages to memory pool   Stefan Brüns
  • [U-Boot] [U-Boot, v3, 5/7] efi_loader: Readd freed pages to memory pool   Alexander Graf
• [U-Boot] [PATCH v3 6/7] efi_loader: Keep memory mapping sorted when splitting an entry   Stefan Brüns
  • [U-Boot] [U-Boot, v3, 6/7] efi_loader: Keep memory mapping sorted when splitting an entry   Alexander Graf
• [U-Boot] [PATCH v3 7/7] efi_loader: Do not leak memory when unlinking a mapping   Stefan Brüns
  • [U-Boot] [U-Boot, v3, 7/7] efi_loader: Do not leak memory when unlinking a mapping   Alexander Graf
• [U-Boot] [PATCH v2 11/12] RFC: Use binman for a sunxi board   Tom Rini
  • [U-Boot] [PATCH v2 11/12] RFC: Use binman for a sunxi board   Simon Glass
    • [U-Boot] [PATCH v2 11/12] RFC: Use binman for a sunxi board   Tom Rini
      • [U-Boot] [PATCH v2 11/12] RFC: Use binman for a sunxi board   Simon Glass
      • [U-Boot] [PATCH v2 11/12] RFC: Use binman for a sunxi board   Simon Glass
• [U-Boot] [PATCH 05/13] patman: Flush output when there is no newline   Simon Glass
• [U-Boot] [PATCH 06/13] buildman: Tidy up the 'cloning' message   Simon Glass
• [U-Boot] [PATCH 07/13] buildman: Print a message when removing old directories   Simon Glass
• [U-Boot] [PATCH 08/13] buildman: Print a message indicating the build is starting   Simon Glass
• [U-Boot] [PATCH 09/13] buildman: Put our local libraries first in the path   Simon Glass
• [U-Boot] [PATCH 10/13] buildman: Allow builds to terminate cleanly   Simon Glass
• [U-Boot] [PATCH 11/13] buildman: Drop the 'active' flag in the builder   Simon Glass
• [U-Boot] [PATCH 12/13] buildman: Don't show a stacktrace on Ctrl-C   Simon Glass
• [U-Boot] [PATCH 13/13] buildman: Drop the 'alive' flag in BuilderThread   Simon Glass
• [U-Boot] [PATCH 1/2] cros_ec: Add function to read back flash parameters   Simon Glass
• [U-Boot] [PATCH 2/2] cros_ec: Add crosec flashinfo command   Simon Glass
• [U-Boot] [PATCH v2] cros_ec: Fix issue with cros_ec_flash_write command   Simon Glass
• [U-Boot] [PATCH 1/4] rockchip: move partitons define from 3036-kylin to 3036-common   Simon Glass
• [U-Boot] [PATCH 2/4] rockchip: rename board.c to rk3288-board.c   Simon Glass
• [U-Boot] [PATCH 3/4] rockchip: move common function from board-file to rk3036-board.c   Simon Glass
• [U-Boot] [PATCH 4/4] rockchip: add boot-mode support for rk3288, rk3036   Simon Glass
• [U-Boot] [PATCH v2 1/3] rockchip: rk3036: Move rockchip_get_cru() out of the driver   Simon Glass
  • [U-Boot] [PATCH v2 2/3] rockchip: rk3399: Move rockchip_get_cru() out of the driver   Simon Glass
    • [U-Boot] [PATCH v2 2/3] rockchip: rk3399: Move rockchip_get_cru() out of the driver   Kever Yang
      • [U-Boot] [PATCH v2 2/3] rockchip: rk3399: Move rockchip_get_cru() out of the driver   Simon Glass
  • [U-Boot] [PATCH v2 3/3] rockchip: rk3288: Move rockchip_get_cru() out of the driver   Simon Glass
    • [U-Boot] [PATCH v2 3/3] rockchip: rk3288: Move rockchip_get_cru() out of the driver   Kever Yang
      • [U-Boot] [PATCH v2 3/3] rockchip: rk3288: Move rockchip_get_cru() out of the driver   Simon Glass
  • [U-Boot] [PATCH v2 1/3] rockchip: rk3036: Move rockchip_get_cru() out of the driver   Kever Yang
    • [U-Boot] [PATCH v2 1/3] rockchip: rk3036: Move rockchip_get_cru() out of the driver   Simon Glass
• [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
  • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
    • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Hans de Goede
      • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Jagan Teki
      • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Hans de Goede
      • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
      • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Hans de Goede
  • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Jagan Teki
    • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
      • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Jagan Teki
      • [U-Boot] [PATCH] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
• [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
  • [U-Boot] [bug report] sunxi: booting from eMMC   Jagan Teki
    • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
    • [U-Boot] [bug report] sunxi: booting from eMMC   Jagan Teki
      • [U-Boot] [bug report] sunxi: booting from eMMC   AneoX
      • [U-Boot] [bug report] sunxi: booting from eMMC   Jagan Teki
      • [U-Boot] [bug report] sunxi: booting from eMMC   AneoX
      • [U-Boot] [bug report] sunxi: booting from eMMC   Jaehoon Chung
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
      • [U-Boot] [bug report] sunxi: booting from eMMC   Jaehoon Chung
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
      • [U-Boot] [bug report] sunxi: booting from eMMC   Jaehoon Chung
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
      • [U-Boot] [bug report] sunxi: booting from eMMC   Jaehoon Chung
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
      • [U-Boot] [bug report] sunxi: booting from eMMC   Jaehoon Chung
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
      • [U-Boot] [bug report] sunxi: booting from eMMC   Jaehoon Chung
      • [U-Boot] [bug report] sunxi: booting from eMMC   Jaehoon Chung
      • [U-Boot] [bug report] sunxi: booting from eMMC   Alexandr Bochkarev
  • [U-Boot] [bug report] sunxi: booting from eMMC   Maxime Ripard
• [U-Boot] net, cmd: fix misaligned cache operation warning   Tom Rini
  • [U-Boot] net, cmd: fix misaligned cache operation warning   Joe Hershberger
    • [U-Boot] net, cmd: fix misaligned cache operation warning   Heiko Schocher
      • [U-Boot] net, cmd: fix misaligned cache operation warning   Tom Rini
    • [U-Boot] net, cmd: fix misaligned cache operation warning   Peter.Chubb at data61.csiro.au
• [U-Boot] [PATCH v3 0/3] net: fec_mxc: Convert to DM   Jagan Teki
  • [U-Boot] [PATCH v3 1/3] net: fec_mxc: Convert into driver model   Jagan Teki
    • [U-Boot] [PATCH v3 1/3] net: fec_mxc: Convert into driver model   Simon Glass
  • [U-Boot] [PATCH v3 2/3] ARM: dts: imx6qdl-icore: Add FEC support   Jagan Teki
  • [U-Boot] [PATCH v3 3/3] icorem6: Use CONFIG_DM_ETH support   Jagan Teki
• [U-Boot] [PATCH v2 01/12] dtoc: Fix bug in GetProp()   Simon Glass
• [U-Boot] [PATCH v2 02/12] dtoc: Adjust GetProps() in fdt_normal to use the node path   Simon Glass
• [U-Boot] [PATCH v2 03/12] dtoc: Add a way for tests to request the fallback library   Simon Glass
• [U-Boot] MMC boot / mvebu / clearfog   Christoph Egger
  • [U-Boot] MMC boot / mvebu / clearfog   Christoph Egger
    • [U-Boot] MMC boot / mvebu / clearfog   Christoph Egger
      • [U-Boot] MMC boot / mvebu / clearfog   Christoph Egger
• [U-Boot] [PATCH v2] cmd/fdt: add possibilty to have 'extrasize' on fdt resize   Simon Glass
• [U-Boot] Please pull u-boot-rockchip   Simon Glass
  • [U-Boot] Please pull u-boot-rockchip   Tom Rini
  • [U-Boot] Please pull u-boot-rockchip   Simon Glass
• [U-Boot] [PATCH 0/6] libfdt: Sync to upstream   Simon Glass
  • [U-Boot] [PATCH 0/6] libfdt: Sync to upstream   Maxime Ripard
    • [U-Boot] [PATCH 0/6] libfdt: Sync to upstream   Simon Glass
      • [U-Boot] [PATCH 0/6] libfdt: Sync to upstream   Maxime Ripard
• [U-Boot] [PATCH 2/6] libfdt: Fix undefined behaviour in fdt_offset_ptr()   Simon Glass
• [U-Boot] [PATCH 3/6] libfdt: Sync up with upstream   Simon Glass
• [U-Boot] [PATCH 4/6] libfdt: Bring in upstream stringlist functions   Simon Glass
• [U-Boot] [PATCH 5/6] libfdt: Sync fdt_for_each_subnode() with upstream   Simon Glass
• [U-Boot] [PATCH 6/6] libfdt: Drop inlining of fdt_path_offset()   Simon Glass
• [U-Boot] [PATCH 00/16] README: Clean up old CONFIG options   Simon Glass
  • [U-Boot] [PATCH 01/16] README: Drop old Intel Monahans comment   Simon Glass
    • [U-Boot] [PATCH 01/16] README: Drop old Intel Monahans comment   Bin Meng
    • [U-Boot] [U-Boot, 01/16] README: Drop old Intel Monahans comment   Tom Rini
  • [U-Boot] [PATCH 02/16] README: Drop CONFIG_COGENT and related options   Simon Glass
    • [U-Boot] [PATCH 02/16] README: Drop CONFIG_COGENT and related options   Bin Meng
    • [U-Boot] [U-Boot, 02/16] README: Drop CONFIG_COGENT and related options   Tom Rini
  • [U-Boot] [PATCH 03/16] README: Correct CONFIG_ENV_OFFSET_RENDUND typo   Simon Glass
    • [U-Boot] [PATCH 03/16] README: Correct CONFIG_ENV_OFFSET_RENDUND typo   Bin Meng
    • [U-Boot] [U-Boot, 03/16] README: Correct CONFIG_ENV_OFFSET_RENDUND typo   Tom Rini
  • [U-Boot] [PATCH 04/16] README: Drop unused JFFS2 options   Simon Glass
    • [U-Boot] [PATCH 04/16] README: Drop unused JFFS2 options   Bin Meng
    • [U-Boot] [U-Boot,04/16] README: Drop unused JFFS2 options   Tom Rini
  • [U-Boot] [PATCH 05/16] README: Drop unused CONFIG_SYS_LS_MC_FW_... options   Simon Glass
    • [U-Boot] [PATCH 05/16] README: Drop unused CONFIG_SYS_LS_MC_FW_... options   Bin Meng
      • [U-Boot] [PATCH 05/16] README: Drop unused CONFIG_SYS_LS_MC_FW_... options   Simon Glass
      • [U-Boot] [PATCH 05/16] README: Drop unused CONFIG_SYS_LS_MC_FW_... options   Tom Rini
    • [U-Boot] [U-Boot, 05/16] README: Drop unused CONFIG_SYS_LS_MC_FW_... options   Tom Rini
  • [U-Boot] [PATCH 06/16] README: Drop CONFIG_OF_BOOT_CPU   Simon Glass
    • [U-Boot] [PATCH 06/16] README: Drop CONFIG_OF_BOOT_CPU   Bin Meng
    • [U-Boot] [U-Boot,06/16] README: Drop CONFIG_OF_BOOT_CPU   Tom Rini
  • [U-Boot] [PATCH 07/16] README: Drop CONFIG_LAN91C96_BASE   Simon Glass
    • [U-Boot] [PATCH 07/16] README: Drop CONFIG_LAN91C96_BASE   Bin Meng
    • [U-Boot] [U-Boot,07/16] README: Drop CONFIG_LAN91C96_BASE   Tom Rini
  • [U-Boot] [PATCH 08/16] README: Drop CONFIG_SYS_USB_BRG_CLK   Simon Glass
    • [U-Boot] [PATCH 08/16] README: Drop CONFIG_SYS_USB_BRG_CLK   Bin Meng
    • [U-Boot] [U-Boot,08/16] README: Drop CONFIG_SYS_USB_BRG_CLK   Tom Rini
  • [U-Boot] [PATCH 09/16] README: sh: Drop CONFIG_SYS_I2C_SH_BASE5   Simon Glass
    • [U-Boot] [PATCH 09/16] README: sh: Drop CONFIG_SYS_I2C_SH_BASE5   Bin Meng
    • [U-Boot] [U-Boot, 09/16] README: sh: Drop CONFIG_SYS_I2C_SH_BASE5   Tom Rini
  • [U-Boot] [PATCH 10/16] README: i2c: Drop unused i2c CONFIG options   Simon Glass
    • [U-Boot] [PATCH 10/16] README: i2c: Drop unused i2c CONFIG options   Heiko Schocher
    • [U-Boot] [PATCH 10/16] README: i2c: Drop unused i2c CONFIG options   Bin Meng
    • [U-Boot] [U-Boot, 10/16] README: i2c: Drop unused i2c CONFIG options   Tom Rini
  • [U-Boot] [PATCH 11/16] README: Drop CONFIG_SYS_INIT_DATA_SIZE   Simon Glass
    • [U-Boot] [PATCH 11/16] README: Drop CONFIG_SYS_INIT_DATA_SIZE   Bin Meng
    • [U-Boot] [U-Boot,11/16] README: Drop CONFIG_SYS_INIT_DATA_SIZE   Tom Rini
  • [U-Boot] [PATCH 12/16] README: Drop CONFIG_SYS_USE_OSCCLK   Simon Glass
    • [U-Boot] [PATCH 12/16] README: Drop CONFIG_SYS_USE_OSCCLK   Bin Meng
    • [U-Boot] [U-Boot,12/16] README: Drop CONFIG_SYS_USE_OSCCLK   Tom Rini
  • [U-Boot] [PATCH 13/16] atmel: Drop README.at91-soc   Simon Glass
    • [U-Boot] [PATCH 13/16] atmel: Drop README.at91-soc   Bin Meng
    • [U-Boot] [PATCH 13/16] atmel: Drop README.at91-soc   Andreas Bießmann
    • [U-Boot] [U-Boot,13/16] atmel: Drop README.at91-soc   Tom Rini
  • [U-Boot] [PATCH 14/16] README: Drop README.imx31   Simon Glass
    • [U-Boot] [PATCH 14/16] README: Drop README.imx31   Bin Meng
    • [U-Boot] [U-Boot,14/16] README: Drop README.imx31   Tom Rini
  • [U-Boot] [PATCH 15/16] README: Drop CONFIG_MPC8349ADS   Simon Glass
    • [U-Boot] [PATCH 15/16] README: Drop CONFIG_MPC8349ADS   Bin Meng
    • [U-Boot] [U-Boot,15/16] README: Drop CONFIG_MPC8349ADS   Tom Rini
  • [U-Boot] [PATCH 16/16] README: Fix CONFIG_SYS_NAND_MAX_DEVICE typo   Simon Glass
    • [U-Boot] [PATCH 16/16] README: Fix CONFIG_SYS_NAND_MAX_DEVICE typo   Scott Wood
    • [U-Boot] [PATCH 16/16] README: Fix CONFIG_SYS_NAND_MAX_DEVICE typo   Bin Meng
    • [U-Boot] [U-Boot, 16/16] README: Fix CONFIG_SYS_NAND_MAX_DEVICE typo   Tom Rini
  • [U-Boot] [PATCH 00/16] README: Clean up old CONFIG options   york sun
• [U-Boot] [PATCH 00/12] dm: x86: Improve vesa driver-model support   Simon Glass
  • [U-Boot] [PATCH 02/12] x86: Add an accelerated memmove() function   Simon Glass
    • [U-Boot] [PATCH 02/12] x86: Add an accelerated memmove() function   Bin Meng
  • [U-Boot] [PATCH 03/12] Fix return value in trailing_strtoln()   Simon Glass
    • [U-Boot] [PATCH 03/12] Fix return value in trailing_strtoln()   Bin Meng
  • [U-Boot] [PATCH 04/12] list: Add list_last_entry() to find the last entry   Simon Glass
    • [U-Boot] [PATCH 04/12] list: Add list_last_entry() to find the last entry   Bin Meng
  • [U-Boot] [PATCH 05/12] dm: core: Add a function to get a uclass name   Simon Glass
    • [U-Boot] [PATCH 05/12] dm: core: Add a function to get a uclass name   Bin Meng
  • [U-Boot] [PATCH 06/12] x86: video: Fix typo in broadwell Kconfig   Simon Glass
    • [U-Boot] [PATCH 06/12] x86: video: Fix typo in broadwell Kconfig   Bin Meng
  • [U-Boot] [PATCH 07/12] dm: x86: video: Add a driver-model driver for ivybridge graphics   Simon Glass
    • [U-Boot] [PATCH 07/12] dm: x86: video: Add a driver-model driver for ivybridge graphics   Bin Meng
      • [U-Boot] [PATCH 07/12] dm: x86: video: Add a driver-model driver for ivybridge graphics   Simon Glass
  • [U-Boot] [PATCH 08/12] dm: stdio: Allow lazy probing of video devices   Simon Glass
    • [U-Boot] [PATCH 08/12] dm: stdio: Allow lazy probing of video devices   Bin Meng
  • [U-Boot] [PATCH 09/12] dm: video: Add driver-model support to vesa graphics   Simon Glass
    • [U-Boot] [PATCH 09/12] dm: video: Add driver-model support to vesa graphics   Bin Meng
  • [U-Boot] [PATCH 10/12] x86: Adjust config to support DM_VIDEO   Simon Glass
    • [U-Boot] [PATCH 10/12] x86: Adjust config to support DM_VIDEO   Bin Meng
  • [U-Boot] [PATCH 11/12] dm: x86: Move samus to use new driver model support   Simon Glass
    • [U-Boot] [PATCH 11/12] dm: x86: Move samus to use new driver model support   Bin Meng
  • [U-Boot] [PATCH 12/12] dm: x86: Move link to use driver model for video   Simon Glass
    • [U-Boot] [PATCH 12/12] dm: x86: Move link to use driver model for video   Bin Meng
• [U-Boot] [PATCH 01/12] Revert "x86: broadwell: gpio: Remove the codes to set up pin control"   Simon Glass
  • [U-Boot] [PATCH 01/12] Revert "x86: broadwell: gpio: Remove the codes to set up pin control"   Bin Meng
• [U-Boot] flashing CHIP with 2016.03 (or master)   Trevor Woerner
  • [U-Boot] flashing CHIP with 2016.03 (or master)   Maxime Ripard
• [U-Boot] Unable to boot from QSPI (u-boot 2016.09.01)   Teoh Choon Zone
• [U-Boot] [PATCH] armv8: fsl: Enable USB only when SYSCLK is 100 MHz   Sriram Dash
  • [U-Boot] [PATCH] armv8: fsl: Enable USB only when SYSCLK is 100 MHz   york sun
• [U-Boot] [U-Boot, 1/2] sandbox, x86: select DM_KEYBOARD instead of default y entry   Tom Rini
• [U-Boot] [U-Boot, 2/2] input: specify the default of I8042_KEYB in more correct manner   Tom Rini
• [U-Boot] [U-Boot, RFC, v2] bootm: fix passing argc to standalone apps   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] disk: part: implement generic function part_get_info_by_name()   Tom Rini
• [U-Boot] [U-Boot,v2,2/4] fastboot: add support for writing MBR   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] disk: part: refactor generic name creation for DOS and ISO   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] fastboot: move FASTBOOT_FLASH options into Kconfig   Tom Rini
• [U-Boot] [U-Boot, 1/2] board: ks2: Enable ECC using detected DDR size   Tom Rini
• [U-Boot] [U-Boot,2/2] board: k2g: Enable ECC byte lane   Tom Rini
• [U-Boot] keystone2: k2g: add env script to load firmware initramfs as part of boot flow   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM: keystone2: Add support for parsing monitor header   Tom Rini
• [U-Boot] [U-Boot, 2/2] ti_armv7_keystone2: Update addr_mon variable   Tom Rini
• [U-Boot] net, macb: fix misaligned cache operation warning   Tom Rini
• [U-Boot] [U-Boot, 1/5] ti: omap5: Add Kconfig options for secure EMIF reservations   Tom Rini
• [U-Boot] [U-Boot, 2/5] arm: omap5: secure API for EMIF memory reservations   Tom Rini
• [U-Boot] [U-Boot,3/5] ARM: DRA7: Add secure emif setup calls   Tom Rini
• [U-Boot] [U-Boot, 4/5] ti_omap5_common: mark region of DRAM protected on HS parts   Tom Rini
• [U-Boot] [U-Boot, 5/5] ARM: omap5: add fdt secure dram reservation fixup   Tom Rini
• [U-Boot] [U-Boot, v4, 01/10] Kconfig: Separate AM33XX SOC config from target board config   Tom Rini
• [U-Boot] [U-Boot, v4, 02/10] am33xx: config.mk: Add support for additional secure boot image types   Tom Rini
• [U-Boot] [U-Boot, v4, 03/10] doc: Update info on using AM33xx secure devices from TI   Tom Rini
• [U-Boot] [U-Boot, v4, 04/10] am33xx: config.mk: Fix option used to enable SPI SPL image type   Tom Rini
• [U-Boot] [U-Boot, v4, 05/10] board: am33xx-hs: Allow post-processing of FIT image on AM33xx   Tom Rini
• [U-Boot] [U-Boot, v4, 06/10] ti: omap-common: Allow AM33xx devices to be built securely   Tom Rini
• [U-Boot] [U-Boot, v4, 08/10] config: Remove usage of CONFIG_STORAGE_EMMC   Tom Rini
• [U-Boot] [U-Boot, v4, 09/10] ti_armv7_common: Disable Falcon Mode on HS devices   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] ARM: TI: Enable DISPLAY_BOARDINFO on all boards   Tom Rini
  • [U-Boot] [U-Boot, v2, 3/3] ARM: TI: Enable DISPLAY_BOARDINFO on all boards   Lokesh Vutla
• [U-Boot] [U-Boot, v4, 10/10] defconfig: Add a config for AM335x High Security EVM with SD Boot support   Tom Rini
• [U-Boot] [ANN] U-Boot v2016.11-rc1 released   Tom Rini
  • [U-Boot] [ANN] U-Boot v2016.11-rc1 released   Heiko Schocher
    • [U-Boot] [ANN] U-Boot v2016.11-rc1 released   Tom Rini
      • [U-Boot] [ANN] U-Boot v2016.11-rc1 released   Heiko Schocher
• [U-Boot] [PATCH] serial: ns16550: Fix serial output on Tegra186   Stephen Warren
  • [U-Boot] [PATCH] serial: ns16550: Fix serial output on Tegra186   Stephen Warren
• [U-Boot] [PATCH] serial: ns16550: Handle -ENOENT when requesting clock   Stephen Warren
  • [U-Boot] [PATCH] serial: ns16550: Handle -ENOENT when requesting clock   Thierry Reding
• [U-Boot] [PATCH v2 2/6] apalis/colibri_t20/t30: deactivate displaying board info   Stephen Warren
  • [U-Boot] [PATCH v2 2/6] apalis/colibri_t20/t30: deactivate displaying board info   Stefan Agner
    • [U-Boot] [PATCH v2 2/6] apalis/colibri_t20/t30: deactivate displaying board info   Stephen Warren
      • [U-Boot] [PATCH v2 2/6] apalis/colibri_t20/t30: deactivate displaying board info   Stefan Agner
      • [U-Boot] [PATCH v2 2/6] apalis/colibri_t20/t30: deactivate displaying board info   Stephen Warren
• [U-Boot] [PATCH v2 5/6] apalis/colibri_t30: move environment location   Stephen Warren
• [U-Boot] [PATCH v2 0/9] MIPS: improve start.S and add exception support   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 1/9] MIPS: make inclusion of ROM exception vectors configurable   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 2/9] MIPS: fix ROM exception vectors   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 3/9] MIPS: fix iand optimize setup of CP0 registers   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 4/9] MIPS: factor out code for initial stack and global data   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 5/9] MIPS: add possibility to setup initial stack and global data in SRAM   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 6/9] MIPS: add asm-offsets for struct pt_regs   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 7/9] MIPS: reserve space for exception vectors   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 8/9] MIPS: add handling for generic and EJTAG exceptions   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 9/9] common/board_f: enable initr_trap for MIPS   Daniel Schwierzeck
  • [U-Boot] [PATCH v2 0/9] MIPS: improve start.S and add exception support   Daniel Schwierzeck
• [U-Boot] [PATCH] gunzip: cache-align write buffer memory   Clemens Gruber
  • [U-Boot] [PATCH] gunzip: cache-align write buffer memory   Simon Glass
• [U-Boot] [PATCH 00/10] mx7: add dt support for Colibri iMX7S/iMX7D   Stefan Agner
  • [U-Boot] [PATCH 00/10] mx7: add dt support for Colibri iMX7S/iMX7D   Stefano Babic
• [U-Boot] [PATCH 1/2] [PATCH 1/2] ARM: sun7i: config: add config for Sinovoip/Bananapi BPI-R1   Stephen Arnold
  • [U-Boot] [PATCH 2/2] [PATCH 2/2] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
  • [U-Boot] [PATCH] [PATCH 2/2] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
    • [U-Boot] [PATCH] [PATCH 2/2] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
      • [U-Boot] [PATCH] [PATCH 2/2] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
• [U-Boot] ARM: sun7i: config: add config for Sinovoip/Bananapi BPI-R1   Stephen Arnold
  • [U-Boot] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
  • [U-Boot] [PATCH v2] [PATCH 2/2] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Stephen Arnold
    • [U-Boot] [PATCH v2] [PATCH 2/2] ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1   Jagan Teki
  • [U-Boot] ARM: sun7i: config: add config for Sinovoip/Bananapi BPI-R1   Stephen Arnold
• [U-Boot] [[RFC Patch] 2/2] tools: buildman: Add compiler wrapper   Simon Glass
• [U-Boot] [[RFC Patch] 1/2] tools: buildmand: Remove duplicated code   Simon Glass
• [U-Boot] [PATCH 14/23] gpio: Provide dummy get/request & is_valid functions   Simon Glass
• [U-Boot] [RFC PATCH 1/6] arm: Fix Kconfig for proper display menu   Simon Glass
• [U-Boot] [RFC PATCH 2/6] arm: Move FSL_LSCH2 FSL_LSCH3 to Kconfig   Simon Glass
• [U-Boot] [RFC PATCH 3/6] arm: Move MAX_CPUS to Kconfig   Simon Glass
• [U-Boot] [RFC PATCH 4/6] arm: Move SYS_FSL_IFC_BANK_COUNT to Kconfig   Simon Glass
• [U-Boot] [RFC PATCH 5/6] arm: Move FSL_HAS_DP_DDR and NUM_DDR_CONTROLLERS to Kconfig   Simon Glass
• [U-Boot] [RFC PATCH 6/6] arm: Move SYS_FSL_SRDS_* and SYS_HAS_SERDES to Kconfig   Simon Glass
• [U-Boot] [PATCH 1/2] rockchip: use rockchip linux partitions layout   Simon Glass
• [U-Boot] [PATCH 2/2] rockchip: doc: add GPT partition layout   Simon Glass
• [U-Boot] [PATCH] cros_ec: Honor the google, remote-bus dt property   Simon Glass
• [U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program   Simon Glass
  • [U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program   Alexander Graf
    • [U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program   Simon Glass
      • [U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program   Alexander Graf
      • [U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program   Simon Glass
      • [U-Boot] [PATCH v2 5/8] arm: efi: Add a hello world test program   Alexander Graf
• [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
  • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Joe Hershberger
    • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
      • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Joe Hershberger
      • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
      • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Joe Hershberger
      • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
      • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Simon Glass
      • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
      • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Joe Hershberger
      • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
  • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Joe Hershberger
    • [U-Boot] [PATCH 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
• [U-Boot] [PATCH V2 1/2] dt: net: add DWC EQoS binding   Stephen Warren
• [U-Boot] [PATCH V2 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
  • [U-Boot] [PATCH V2 2/2] net: add driver for Synopsys Ethernet QoS device   Joe Hershberger
    • [U-Boot] [PATCH V2 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
• [U-Boot] [PATCH] cmd: cros_ec: Move crosec commands to cmd subdirectory   Moritz Fischer
  • [U-Boot] [PATCH] cmd: cros_ec: Move crosec commands to cmd subdirectory   Simon Glass
    • [U-Boot] [PATCH] cmd: cros_ec: Move crosec commands to cmd subdirectory   Moritz Fischer
• [U-Boot] git send-email and patch headers/subject line   Stephen Arnold
  • [U-Boot] git send-email and patch headers/subject line   Brüns, Stefan
    • [U-Boot] git send-email and patch headers/subject line   Stephen Arnold
• [U-Boot] [PATCH v3 0/3] ARM: TI: Enable DISPLAY_{CPU/BOARD}INFO   Lokesh Vutla
  • [U-Boot] [PATCH v3 1/3] ARM: AM437X: Add Silicon ID support   Lokesh Vutla
    • [U-Boot] [U-Boot,v3,1/3] ARM: AM437X: Add Silicon ID support   Tom Rini
  • [U-Boot] [PATCH v3 2/3] ARM: TI: Enable DISPLAY_CPUINFO on all SoCs   Lokesh Vutla
  • [U-Boot] [PATCH v3 3/3] ARM: TI: Enable DISPLAY_BOARDINFO on all boards   Lokesh Vutla
• [U-Boot] Unable to boot from QSPI (u-boot 2016.11-rc1)   Teoh Choon Zone
  • [U-Boot] Unable to boot from QSPI (u-boot 2016.11-rc1)   Jagan Teki
    • [U-Boot] Unable to boot from QSPI (u-boot 2016.11-rc1)   Teoh Choon Zone
      • [U-Boot] Unable to boot from QSPI (u-boot 2016.11-rc1)   Jagan Teki
  • [U-Boot] Unable to boot from QSPI (u-boot 2016.11-rc1)   Anatolij Gustschin
    • [U-Boot] Unable to boot from QSPI (u-boot 2016.11-rc1)   Teoh Choon Zone
• [U-Boot] [PATCH V2 1/8] tools: imximage: add plugin support   Stefano Babic
  • [U-Boot] [PATCH V2 1/8] tools: imximage: add plugin support   Stefano Babic
    • [U-Boot] [PATCH V2 1/8] tools: imximage: add plugin support   Peng Fan
• [U-Boot] [PATCH] imx-common: enlarge mux width to 4   Stefano Babic
• [U-Boot] [PATCH] imx: imx6ul: disable POR_B internal pull up   Stefano Babic
• [U-Boot] [PATCH] imx: mx6: fix USB bmode to use reserved value   Stefano Babic
• [U-Boot] [PATCH] imx: s/docs\/README.imximage/doc\/README.imximage/g   Stefano Babic
  • [U-Boot] [PATCH] imx: s/docs\/README.imximage/doc\/README.imximage/g   Stefano Babic
    • [U-Boot] [PATCH] imx: s/docs\/README.imximage/doc\/README.imximage/g   Jagan Teki
      • [U-Boot] [PATCH] imx: s/docs\/README.imximage/doc\/README.imximage/g   Stefano Babic
      • [U-Boot] [PATCH] imx: s/docs\/README.imximage/doc\/README.imximage/g   Jagan Teki
• [U-Boot] [PATCH v3 2/2] mx6sabresd: Add SPL support for the mx6dl variant   Stefano Babic
• [U-Boot] [PATCH] board: tbs2910: Fix BOOTMAPSZ   Stefano Babic
• [U-Boot] [PATCH] arm: imx6: configure NoC on i.MX6DQP   Stefano Babic
• [U-Boot] [PATCH] imx: iomux-v3: fix pad setup on i.MX6DQP when CONFIG_MX6QDL is defined   Stefano Babic
• [U-Boot] [PATCH] imx_watchdog: Do not assert WDOG_B on watchdog init   Stefano Babic
• [U-Boot] [PATCH] board: tbs2910: Add CMD_PART   Stefano Babic
• [U-Boot] [PATCH] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc   Tien Fong Chee
  • [U-Boot] [PATCH] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc   Tien Fong Chee
  • [U-Boot] [PATCH] ARM:dts: Added device tree for socfpga arria10 development kit sdmmc   Marek Vasut
• [U-Boot] [PATCH][v3] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS   Pratiyush Mohan Srivastava
  • [U-Boot] [PATCH][v3] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS   york sun
    • [U-Boot] [PATCH][v3] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS   Pratiyush Srivastava
• [U-Boot] [PATCH][v2] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS   Pratiyush Mohan Srivastava
  • [U-Boot] [PATCH][v2] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS   york sun
    • [U-Boot] [PATCH][v2] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS   Pratiyush Srivastava
• [U-Boot] [PATCH v7 02/12] serial: ns16550: Support clocks via phandle   Vlad Zakharov
  • [U-Boot] [PATCH v7 02/12] serial: ns16550: Support clocks via phandle   Vlad Zakharov
• [U-Boot] [PATCH] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Masahiro Yamada
  • [U-Boot] [PATCH] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Simon Glass
    • [U-Boot] [PATCH] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Masahiro Yamada
      • [U-Boot] [PATCH] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Simon Glass
      • [U-Boot] [PATCH] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Masahiro Yamada
• [U-Boot] [PATCH 01/10] dm: imx: serial: support device tree   Stefano Babic
  • [U-Boot] [PATCH 01/10] dm: imx: serial: support device tree   Stefan Agner
    • [U-Boot] [PATCH 01/10] dm: imx: serial: support device tree   Stefano Babic
• [U-Boot] [PATCH v5 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
  • [U-Boot] [PATCH v5 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
    • [U-Boot] [PATCH v5 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
      • [U-Boot] [PATCH v5 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
• [U-Boot] ACPI in general   york sun
  • [U-Boot] ACPI in general   Bin Meng
  • [U-Boot] ACPI in general   Simon Glass
    • [U-Boot] ACPI in general   york sun
    • [U-Boot] ACPI in general   Timur Tabi
    • [U-Boot] ACPI in general   york sun
      • [U-Boot] ACPI in general   Tom Rini
      • [U-Boot] ACPI in general   Timur Tabi
      • [U-Boot] ACPI in general   Tom Rini
      • [U-Boot] ACPI in general   Timur Tabi
      • [U-Boot] ACPI in general   Bin Meng
      • [U-Boot] ACPI in general   Timur Tabi
      • [U-Boot] ACPI in general   Olof Johansson
• [U-Boot] imx53 performance issue after updating to version 2016.9 (tftp download, hash calculation)   Martin Reichherzer
  • [U-Boot] imx53 performance issue after updating to version 2016.9 (tftp download, hash calculation)   Fabio Estevam
• [U-Boot] Adding memcmp to standalone application   larkym
• [U-Boot] STM32F7 Discovery hangs on master   Nicolae Rosia
  • [U-Boot] STM32F7 Discovery hangs on master   Vikas MANOCHA
• [U-Boot] [PATCH v2 4/5] sandbox/fs: Set correct filetype for unknown filetype   Stefan Brüns
  • [U-Boot] [PATCH v2 4/5] sandbox/fs: Set correct filetype for unknown filetype   Simon Glass
• [U-Boot] [PATCH v6 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
  • [U-Boot] [PATCH v6 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
    • [U-Boot] [PATCH v6 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
• [U-Boot] [PATCH v6 01/21] serial: Kconfig: Add MXC_UART entry   Jagan Teki
  • [U-Boot] [PATCH v6 02/21] thermal: Kconfig: Add IMX_THERMAL entry   Jagan Teki
  • [U-Boot] [PATCH v6 03/21] Kconfig: Add DEFAULT_FDT_FILE entry   Jagan Teki
  • [U-Boot] [PATCH v6 04/21] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support   Jagan Teki
  • [U-Boot] [PATCH v6 05/21] net: Kconfig: Add FEC_MXC entry   Jagan Teki
  • [U-Boot] [PATCH v6 06/21] imx6: icorem6: Add ENET support   Jagan Teki
  • [U-Boot] [PATCH v6 07/21] imx: s/docs\/README.imximage/doc\/README.imximage/g   Jagan Teki
  • [U-Boot] [PATCH v6 08/21] arm: dts: Add devicetree for i.MX6DL   Jagan Teki
  • [U-Boot] [PATCH v6 09/21] arm: dts: Add devicetree for i.MX6DQL   Jagan Teki
  • [U-Boot] [PATCH v6 10/21] arm: dts: imx6dl: Add pinctrl defines   Jagan Teki
  • [U-Boot] [PATCH v6 11/21] dt-bindings: clock: imx6qdl: Add clock defines   Jagan Teki
  • [U-Boot] [PATCH v6 12/21] arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo   Jagan Teki
  • [U-Boot] [PATCH v6 13/21] imx6q: icorem6: Enable pinctrl driver   Jagan Teki
  • [U-Boot] [PATCH v6 14/21] engicam: icorem6: Add DM_GPIO, DM_MMC support   Jagan Teki
  • [U-Boot] [PATCH v6 15/21] arm: dts: Add devicetree for i.MX6Q   Jagan Teki
  • [U-Boot] [PATCH v6 16/21] arm: dts: imx6q: Add pinctrl defines   Jagan Teki
  • [U-Boot] [PATCH v6 17/21] arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual   Jagan Teki
  • [U-Boot] [PATCH v6 18/21] mtd: nand: Kconfig: Add NAND_MXS entry   Jagan Teki
  • [U-Boot] [PATCH v6 19/21] imx6: icorem6: Add NAND support   Jagan Teki
  • [U-Boot] [PATCH v6 20/21] imx6: icorem6: Enable MTD device support   Jagan Teki
  • [U-Boot] [PATCH v6 21/21] imx6: icorem6: Add default mtd nand partition table   Jagan Teki
• [U-Boot] [PATCH v4 0/3] net: fec_mxc: Convert to DM   Jagan Teki
• [U-Boot] [PATCH v4 1/3] net: fec_mxc: Convert into driver model   Jagan Teki
  • [U-Boot] [PATCH v4 2/3] ARM: dts: imx6qdl-icore: Add FEC support   Jagan Teki
  • [U-Boot] [PATCH v4 3/3] icorem6: Use CONFIG_DM_ETH support   Jagan Teki
• [U-Boot] [PATCH v2 1/8] arm: Fix Kconfig for proper display menu   York Sun
  • [U-Boot] [PATCH v2 2/8] arm: Move FSL_LSCH2 FSL_LSCH3 to Kconfig   York Sun
  • [U-Boot] [PATCH v2 1/8] arm: Fix Kconfig for proper display menu   york sun
• [U-Boot] [PATCH v2 1/2] tools: buildmand: Remove duplicated code   York Sun
  • [U-Boot] [PATCH v2 1/2] tools: buildmand: Remove duplicated code   york sun
    • [U-Boot] [PATCH v2 1/2] tools: buildmand: Remove duplicated code   Simon Glass
• [U-Boot] [PATCH v2 2/2] tools: buildman: Add compiler wrapper   York Sun
  • [U-Boot] [PATCH v2 2/2] tools: buildman: Add compiler wrapper   Simon Glass
• [U-Boot] [PATCH v2 3/8] arm: Move MAX_CPUS to Kconfig   York Sun
• [U-Boot] [PATCH v2 4/8] arm: Move SYS_FSL_IFC_BANK_COUNT to Kconfig   York Sun
• [U-Boot] [PATCH v2 5/8] arm: Move FSL_HAS_DP_DDR and NUM_DDR_CONTROLLERS to Kconfig   York Sun
• [U-Boot] [PATCH v2] cmd: cros_ec: Move crosec commands to cmd subdirectory   Moritz Fischer
  • [U-Boot] [PATCH v2] cmd: cros_ec: Move crosec commands to cmd subdirectory   Simon Glass
• [U-Boot] [PATCH v3 00/10] binman: A tool for creating firmware images   Simon Glass
  • [U-Boot] [PATCH v3 01/10] binman: Introduce binman, a tool for building binary images   Simon Glass
    • [U-Boot] [PATCH v3 01/10] binman: Introduce binman, a tool for building binary images   Masahiro Yamada
      • [U-Boot] [PATCH v3 01/10] binman: Introduce binman, a tool for building binary images   Simon Glass
  • [U-Boot] [PATCH v3 02/10] binman: Add basic entry types for U-Boot   Simon Glass
  • [U-Boot] [PATCH v3 03/10] binman: Add support for building x86 ROMs   Simon Glass
  • [U-Boot] [PATCH v3 04/10] binman: Add support for u-boot.img as an input binary   Simon Glass
  • [U-Boot] [PATCH v3 05/10] binman: Add support for building x86 ROMs with SPL   Simon Glass
  • [U-Boot] [PATCH v3 06/10] binman: Add a build rule for binman   Simon Glass
  • [U-Boot] [PATCH v3 07/10] binman: Allow configuration options to be used in .dts files   Simon Glass
  • [U-Boot] [PATCH v3 08/10] binman: Automatically include a U-Boot .dtsi file   Simon Glass
    • [U-Boot] [PATCH v3 08/10] binman: Automatically include a U-Boot .dtsi file   Masahiro Yamada
      • [U-Boot] [PATCH v3 08/10] binman: Automatically include a U-Boot .dtsi file   Simon Glass
      • [U-Boot] [PATCH v3 08/10] binman: Automatically include a U-Boot .dtsi file   Stefan Bruens
      • [U-Boot] [PATCH v3 08/10] binman: Automatically include a U-Boot .dtsi file   Tom Rini
  • [U-Boot] [PATCH v3 09/10] RFC: Use binman for a sunxi board   Simon Glass
    • [U-Boot] [PATCH v3 09/10] RFC: Use binman for a sunxi board   Tom Rini
  • [U-Boot] [PATCH v3 10/10] RFC: Use binman for an x86 board   Simon Glass
• [U-Boot] [PATCH v2 6/8] arm: Move SYS_FSL_SRDS_* and SYS_HAS_SERDES to Kconfig   York Sun
• [U-Boot] [PATCH v2 7/8] armv8: fsl-layerscape: Move DDR config options to Kconfig   York Sun
  • [U-Boot] [PATCH v2 7/8] armv8: fsl-layerscape: Move DDR config options to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 8/8] armv7: ls1021a: Move DDR config options to Kconfig   York Sun
  • [U-Boot] [PATCH v2 8/8] armv7: ls1021a: Move DDR config options to Kconfig   Simon Glass
    • [U-Boot] [PATCH v2 8/8] armv7: ls1021a: Move DDR config options to Kconfig   york sun
• [U-Boot] SPL load ARM Trusted Firmware BL31?   Masahiro Yamada
  • [U-Boot] SPL load ARM Trusted Firmware BL31?   Michal Simek
    • [U-Boot] SPL load ARM Trusted Firmware BL31?   Simon Glass
      • [U-Boot] SPL load ARM Trusted Firmware BL31?   Masahiro Yamada
      • [U-Boot] SPL load ARM Trusted Firmware BL31?   Simon Glass
      • [U-Boot] SPL load ARM Trusted Firmware BL31?   Michal Simek
    • [U-Boot] SPL load ARM Trusted Firmware BL31?   Masahiro Yamada
      • [U-Boot] SPL load ARM Trusted Firmware BL31?   Michal Simek
  • [U-Boot] SPL load ARM Trusted Firmware BL31?   Dan Handley
    • [U-Boot] SPL load ARM Trusted Firmware BL31?   Mike Looijmans
      • [U-Boot] SPL load ARM Trusted Firmware BL31?   Michal Simek
• [U-Boot] [PATCH v2] x86: Fix Linux v4.7+ zimage booting (update bootparam.h)   Bin Meng
• [U-Boot] x86: SPI-NOR (MTD): ACPI missing?   Bin Meng
  • [U-Boot] x86: SPI-NOR (MTD): ACPI missing?   Stefan Roese
• [U-Boot] [PATCH v2] power: regulator: Add support for gpio regulators   Keerthy
  • [U-Boot] [PATCH v2] power: regulator: Add support for gpio regulators   Simon Glass
    • [U-Boot] [PATCH v2] power: regulator: Add support for gpio regulators   Przemyslaw Marczak
      • [U-Boot] [PATCH v2] power: regulator: Add support for gpio regulators   Simon Glass
• [U-Boot] [PATCH] fastboot: add support for writing raw MMC   Petr Kulhavy
  • [U-Boot] [PATCH] fastboot: add support for writing raw MMC   Jaehoon Chung
    • [U-Boot] [PATCH] fastboot: add support for writing raw MMC   Petr Kulhavy
• [U-Boot] rk3288 u-boot   Simon Glass
• [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL   Stephen Warren
  • [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL   Fabian Vogt
    • [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL   Simon Glass
    • [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL   Alexander Graf
      • [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL   Eric Anholt
      • [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL   Stefan Bruens
      • [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL   Eric Anholt
      • [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL   Tom Rini
      • [U-Boot] [PATCH 0/9] Switch bcm283x platform to use OF_CONTROL   Stefan Bruens
• [U-Boot] [PATCH] arm: ls102xa: Remove reduplicate definition for Generic Timer frequency   york sun
  • [U-Boot] [PATCH] arm: ls102xa: Remove reduplicate definition for Generic Timer frequency   Alison Wang
    • [U-Boot] [PATCH] arm: ls102xa: Remove reduplicate definition for Generic Timer frequency   york sun
• [U-Boot] [PATCHv2 2/2] armv8/fsl-lsch3: consolidate the clock system initialization   york sun
  • [U-Boot] [PATCHv2 2/2] armv8/fsl-lsch3: consolidate the clock system initialization   Z.Q. Hou
  • [U-Boot] [PATCHv2 2/2] armv8/fsl-lsch3: consolidate the clock system initialization   Prabhakar Kushwaha
    • [U-Boot] [PATCHv2 2/2] armv8/fsl-lsch3: consolidate the clock system initialization   Z.Q. Hou
• [U-Boot] [PATCH 1/5] check-config: fix wrong comment about how to build whitelist   Simon Glass
  • [U-Boot] [PATCH 1/5] check-config: fix wrong comment about how to build whitelist   Masahiro Yamada
• [U-Boot] [PATCH RFC v8 00/16] SPI-NOR/MTD addition   Jagan Teki
  • [U-Boot] [PATCH RFC v8 01/16] dm: mtd: Add dm mtd core ops   Jagan Teki
  • [U-Boot] [PATCH RFC v8 02/16] mtd: Add SPI-NOR core support   Jagan Teki
  • [U-Boot] [PATCH RFC v8 03/16] mtd: spi-nor: Kconfig: Add MTD_SPI_NOR entry   Jagan Teki
  • [U-Boot] [PATCH RFC v8 04/16] mtd: spi-nor: Kconfig: Add MTD_SPI_NOR_USE_4K_SECTORS   Jagan Teki
  • [U-Boot] [PATCH RFC v8 05/16] mtd: spi-nor: Kconfig: Add SPI_NOR_MISC entry   Jagan Teki
  • [U-Boot] [PATCH RFC v8 06/16] mtd: spi-nor: Kconfig: Add SPI_NOR_MACRONIX entry   Jagan Teki
  • [U-Boot] [PATCH RFC v8 07/16] mtd: spi-nor: Kconfig: Add SPI_NOR_SPANSION entry   Jagan Teki
  • [U-Boot] [PATCH RFC v8 08/16] mtd: spi-nor: Kconfig: Add SPI_NOR_STMICRO entry   Jagan Teki
  • [U-Boot] [PATCH RFC v8 09/16] mtd: spi-nor: Kconfig: Add SPI_NOR_SST entry   Jagan Teki
  • [U-Boot] [PATCH RFC v8 10/16] mtd: spi-nor: Kconfig: Add SPI_NOR_WINBOND entry   Jagan Teki
  • [U-Boot] [PATCH RFC v8 11/16] spi: Add spi_write_then_read   Jagan Teki
  • [U-Boot] [PATCH RFC v8 12/16] mtd: spi-nor: Add m25p80 driver   Jagan Teki
  • [U-Boot] [PATCH RFC v8 13/16] mtd: spi-nor: Kconfig: Add MTD_M25P80 entry   Jagan Teki
  • [U-Boot] [PATCH RFC v8 14/16] mtd: spi-nor: Add zynq qspi driver   Jagan Teki
  • [U-Boot] [PATCH RFC v8 15/16] mtd: spi-nor: zynq_qspi: Kconfig: Add MTD_ZYNQ   Jagan Teki
  • [U-Boot] [PATCH RFC v8 16/16] mtd: spi-nor: Add 4-byte address width support   Jagan Teki
• [U-Boot] [PATCH v4 00/17] sf:Updates on flash detection   Jagan Teki
• [U-Boot] [PATCH] udoo: Add a README file   Fabio Estevam
  • [U-Boot] [PATCH] udoo: Add a README file   Stefano Babic
• [U-Boot] [PATCH v6 0/2] armv8: Support loading 32-bit OS in AArch32 execution state   york sun
  • [U-Boot] [PATCH v6 0/2] armv8: Support loading 32-bit OS in AArch32 execution state   Alison Wang
• [U-Boot] [PATCH 1/2] armv8: ls2080: Enable CONFIG_DM_USB in defconfigs   york sun
  • [U-Boot] [PATCH 1/2] armv8: ls2080: Enable CONFIG_DM_USB in defconfigs   Sriram Dash
    • [U-Boot] [PATCH 1/2] armv8: ls2080: Enable CONFIG_DM_USB in defconfigs   york sun
      • [U-Boot] [PATCH 1/2] armv8: ls2080: Enable CONFIG_DM_USB in defconfigs   Sriram Dash
• [U-Boot] [PATCH 1/1]: filesystems : add "file exists" cmd   Sergey Kubushyn
  • [U-Boot] [PATCH 1/1]: filesystems : add "file exists" cmd   Tom Rini
    • [U-Boot] [PATCH 1/1]: filesystems : add "file exists" cmd   Sergey Kubushyn
      • [U-Boot] [PATCH 1/1]: filesystems : add "file exists" cmd   Sergey Kubushyn
• [U-Boot] [PATCH 1/1]: add nand_bootupdate for i.MX6 and likes   Sergey Kubushyn
  • [U-Boot] [PATCH 1/1]: add nand_bootupdate for i.MX6 and likes   Stefano Babic
    • [U-Boot] [PATCH 1/1]: add nand_bootupdate for i.MX6 and likes   Sergey Kubushyn
      • [U-Boot] [PATCH 1/1]: add nand_bootupdate for i.MX6 and likes   Fabio Estevam
      • [U-Boot] [PATCH 1/1]: add nand_bootupdate for i.MX6 and likes   Stefano Babic
      • [U-Boot] [PATCH 1/1]: add nand_bootupdate for i.MX6 and likes   Sergey Kubushyn
  • [U-Boot] [PATCH 1/1]: add nand_bootupdate for i.MX6 and likes   Jagan Teki
  • [U-Boot] [PATCH 1/1]: add nand_bootupdate for i.MX6 and likes   Scott Wood
    • [U-Boot] [PATCH 1/1]: add nand_bootupdate for i.MX6 and likes   Sergey Kubushyn
• [U-Boot] [PATCH] spi: fsl_qspi: Preserve endianness of QSPI MCR   York Sun
  • [U-Boot] [PATCH] spi: fsl_qspi: Preserve endianness of QSPI MCR   Jagan Teki
• [U-Boot] [PATCH 1/1]: environment in eMMC boot partition   Sergey Kubushyn
  • [U-Boot] [PATCH 1/1]: environment in eMMC boot partition   Tom Rini
    • [U-Boot] [PATCH 1/1]: environment in eMMC boot partition   Sergey Kubushyn
    • [U-Boot] [PATCH 1/1]: environment in eMMC boot partition   Tom Rini
      • [U-Boot] [PATCH 1/1]: environment in eMMC boot partition   Sergey Kubushyn
    • [U-Boot] [PATCH 1/1]: environment in eMMC boot partition   Tom Rini
• [U-Boot] [PATCH v3 00/10] mx7: add dt support for Colibri iMX7S/iMX7D   Stefan Agner
  • [U-Boot] [PATCH v3 03/10] arm: dts: imx7: add pinctrl defines   Stefan Agner
  • [U-Boot] [PATCH v3 00/10] mx7: add dt support for Colibri iMX7S/iMX7D   Stefano Babic
• [U-Boot] [PATCH v3 01/10] dm: imx: serial: support device tree   Stefan Agner
• [U-Boot] [PATCH v3 02/10] pinctrl: imx: do not announce driver initialization   Stefan Agner
• [U-Boot] [PATCH v3 04/10] arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree   Stefan Agner
• [U-Boot] [PATCH v3 05/10] colibri_imx7: remove legancy I2C support   Stefan Agner
• [U-Boot] [PATCH v3 06/10] colibri_imx7: remove legancy UART platform data   Stefan Agner
• [U-Boot] [PATCH v3 07/10] power: pmic: add Ricoh RN5T567 PMIC support   Stefan Agner
• [U-Boot] [PATCH v3 08/10] arm: dts: imx7: add Ricoh RN5T567 PMIC node   Stefan Agner
• [U-Boot] [PATCH v3 09/10] colibri_imx7: use Ricoh RN5T567 to reboot the board   Stefan Agner
• [U-Boot] [PATCH v3 10/10] configs: enable device tree for Colibri iMX7   Stefan Agner
• [U-Boot] [U-Boot, v3] net: Fix cache misalignment message after network load operations   Tom Rini
  • [U-Boot] [U-Boot, v3] net: Fix cache misalignment message after network load operations   Joe Hershberger
• [U-Boot] [PATCH v2 2/3] rk3288: sdram: auto-detect the capacity   Vagrant Cascadian
  • [U-Boot] [PATCH v2 2/3] rk3288: sdram: auto-detect the capacity   Kever Yang
• [U-Boot] [PATCH v2 3/3] dts: rk3288: remove node in dmc which not need anymore   Vagrant Cascadian
• [U-Boot] [PATCH v2 05/10] patman: Decode stdout/stderr as utf8, be python 3.x safe   Simon Glass
• [U-Boot] [PATCH v2 01/10] patman: Replace tabs with spaces   Simon Glass
• [U-Boot] [PATCH v2 02/10] patman: Make print statements python 3.x safe   Simon Glass
• [U-Boot] [PATCH v2 03/10] patman: Make exception handling python 3.x safe   Simon Glass
• [U-Boot] [PATCH v2 04/10] patman: Import 'configparser' lower case to be python 3.x safe   Simon Glass
• [U-Boot] [PATCH v2 06/10] patman: Use items() to iterate over dictionaries   Simon Glass
• [U-Boot] [PATCH v2 07/10] patman: Fix doctest StringIO import for python 3.x   Simon Glass
• [U-Boot] [PATCH v2 08/10] dtoc: Use items() to iterate over dictionaries in python 3.x   Simon Glass
• [U-Boot] [PATCH v2 09/10] dtoc: Decode strings for struct.unpack on python 3.x   Simon Glass
• [U-Boot] [PATCH v2 10/10] dtoc: Make integer division python 3.x safe   Simon Glass
• [U-Boot] [PATCH v2 00/12] dm: x86: Improve vesa driver-model support   Simon Glass
  • [U-Boot] [PATCH v2 01/12] Revert "x86: broadwell: gpio: Remove the codes to set up pin control"   Simon Glass
    • [U-Boot] [PATCH v2 01/12] Revert "x86: broadwell: gpio: Remove the codes to set up pin control"   Bin Meng
  • [U-Boot] [PATCH v2 02/12] x86: Add an accelerated memmove() function   Simon Glass
    • [U-Boot] [PATCH v2 02/12] x86: Add an accelerated memmove() function   Bin Meng
      • [U-Boot] [PATCH v2 02/12] x86: Add an accelerated memmove() function   Bin Meng
      • [U-Boot] [PATCH v2 02/12] x86: Add an accelerated memmove() function   Bin Meng
      • [U-Boot] [PATCH v2 02/12] x86: Add an accelerated memmove() function   Bin Meng
      • [U-Boot] [PATCH v2 02/12] x86: Add an accelerated memmove() function   Simon Glass
  • [U-Boot] [PATCH v2 03/12] Fix return value in trailing_strtoln()   Simon Glass
    • [U-Boot] [PATCH v2 03/12] Fix return value in trailing_strtoln()   Bin Meng
  • [U-Boot] [PATCH v2 04/12] list: Add list_last_entry() to find the last entry   Simon Glass
    • [U-Boot] [PATCH v2 04/12] list: Add list_last_entry() to find the last entry   Bin Meng
  • [U-Boot] [PATCH v2 05/12] dm: core: Add a function to get a uclass name   Simon Glass
    • [U-Boot] [PATCH v2 05/12] dm: core: Add a function to get a uclass name   Bin Meng
  • [U-Boot] [PATCH v2 06/12] x86: video: Fix typo in broadwell Kconfig   Simon Glass
    • [U-Boot] [PATCH v2 06/12] x86: video: Fix typo in broadwell Kconfig   Bin Meng
  • [U-Boot] [PATCH v2 07/12] dm: x86: video: Add a driver-model driver for ivybridge graphics   Simon Glass
    • [U-Boot] [PATCH v2 07/12] dm: x86: video: Add a driver-model driver for ivybridge graphics   Bin Meng
      • [U-Boot] [PATCH v2 07/12] dm: x86: video: Add a driver-model driver for ivybridge graphics   Bin Meng
  • [U-Boot] [PATCH v2 08/12] dm: stdio: Allow lazy probing of video devices   Simon Glass
    • [U-Boot] [PATCH v2 08/12] dm: stdio: Allow lazy probing of video devices   Bin Meng
      • [U-Boot] [PATCH v2 08/12] dm: stdio: Allow lazy probing of video devices   Bin Meng
  • [U-Boot] [PATCH v2 09/12] dm: video: Add driver-model support to vesa graphics   Simon Glass
    • [U-Boot] [PATCH v2 09/12] dm: video: Add driver-model support to vesa graphics   Bin Meng
  • [U-Boot] [PATCH v2 10/12] x86: Adjust config to support DM_VIDEO   Simon Glass
    • [U-Boot] [PATCH v2 10/12] x86: Adjust config to support DM_VIDEO   Bin Meng
  • [U-Boot] [PATCH v2 11/12] dm: x86: Move samus to use new driver model support   Simon Glass
    • [U-Boot] [PATCH v2 11/12] dm: x86: Move samus to use new driver model support   Bin Meng
  • [U-Boot] [PATCH v2 12/12] dm: x86: Move link to use driver model for video   Simon Glass
    • [U-Boot] [PATCH v2 12/12] dm: x86: Move link to use driver model for video   Bin Meng
• [U-Boot] [PATCH v1] spl: move FDT_FIXUP_PARTITIONS to Kconfig   Heiko Schocher
  • [U-Boot] [U-Boot,v1] spl: move FDT_FIXUP_PARTITIONS to Kconfig   Tom Rini
• [U-Boot] [PATCH v1 0/2] spl: move SPL_OS_BOOT and SYS_OS_BASE to Kconfig   Heiko Schocher
  • [U-Boot] [PATCH v1 1/2] spl: move SPL_OS_BOOT to Kconfig   Heiko Schocher
    • [U-Boot] [U-Boot,v1,1/2] spl: move SPL_OS_BOOT to Kconfig   Tom Rini
  • [U-Boot] [PATCH v1 0/2] spl: move SPL_OS_BOOT and SYS_OS_BASE to Kconfig   Andrew F. Davis
    • [U-Boot] [PATCH v1 0/2] spl: move SPL_OS_BOOT and SYS_OS_BASE to Kconfig   Tom Rini
    • [U-Boot] [PATCH v1 0/2] spl: move SPL_OS_BOOT and SYS_OS_BASE to Kconfig   Heiko Schocher
• [U-Boot] [PATCH v1 2/2] spl: move SYS_OS_BASE to Kconfig   Heiko Schocher
  • [U-Boot] [U-Boot,v1,2/2] spl: move SYS_OS_BASE to Kconfig   Tom Rini
• [U-Boot] [PATCH 0/6] Add support for the BK4R1 variant of PCM052   Stefano Babic
  • [U-Boot] [PATCH 0/6] Add support for the BK4R1 variant of PCM052   Albert ARIBAUD
    • [U-Boot] [PATCH 0/6] Add support for the BK4R1 variant of PCM052   Stefano Babic
      • [U-Boot] [PATCH 0/6] Add support for the BK4R1 variant of PCM052   Albert ARIBAUD
• [U-Boot] [PATCH] board: ge: bx50v3: Pass video bootargs for b850v3   Stefano Babic
  • [U-Boot] [PATCH] board: ge: bx50v3: Pass video bootargs for b850v3   Stefano Babic
    • [U-Boot] [PATCH] board: ge: bx50v3: Pass video bootargs for b850v3   Akshay Bhat
      • [U-Boot] [PATCH] board: ge: bx50v3: Pass video bootargs for b850v3   Stefano Babic
• [U-Boot] x86: Updating u-boot.bin vs u-boot.rom   Stefan Roese
  • [U-Boot] x86: Updating u-boot.bin vs u-boot.rom   Stefan Roese
    • [U-Boot] x86: Updating u-boot.bin vs u-boot.rom   Simon Glass
• [U-Boot] x86: u-boot.bin differs in u-boot.rom   Stefan Roese
  • [U-Boot] x86: u-boot.bin differs in u-boot.rom   Bin Meng
• [U-Boot] [PATCH v5 0/5] net: fec_mxc: Convert to DM   Jagan Teki
  • [U-Boot] [PATCH v5 1/5] net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr   Jagan Teki
    • [U-Boot] [PATCH v5 1/5] net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr   Joe Hershberger
  • [U-Boot] [PATCH v5 2/5] net: fec_mxc: Convert into driver model   Jagan Teki
    • [U-Boot] [PATCH v5 2/5] net: fec_mxc: Convert into driver model   Jagan Teki
      • [U-Boot] [PATCH v5 2/5] net: fec_mxc: Convert into driver model   Simon Glass
      • [U-Boot] [PATCH v5 2/5] net: fec_mxc: Convert into driver model   Jagan Teki
      • [U-Boot] [PATCH v5 2/5] net: fec_mxc: Convert into driver model   Simon Glass
    • [U-Boot] [PATCH v5 2/5] net: fec_mxc: Convert into driver model   Joe Hershberger
      • [U-Boot] [PATCH v5 2/5] net: fec_mxc: Convert into driver model   Jagan Teki
  • [U-Boot] [PATCH v5 3/5] net: fec_mxc: Driver cleanups   Jagan Teki
    • [U-Boot] [PATCH v5 3/5] net: fec_mxc: Driver cleanups   Joe Hershberger
  • [U-Boot] [PATCH v5 4/5] ARM: dts: imx6qdl-icore: Add FEC support   Jagan Teki
    • [U-Boot] [PATCH v5 4/5] ARM: dts: imx6qdl-icore: Add FEC support   Joe Hershberger
  • [U-Boot] [PATCH v5 5/5] icorem6: Use CONFIG_DM_ETH support   Jagan Teki
    • [U-Boot] [PATCH v5 5/5] icorem6: Use CONFIG_DM_ETH support   Joe Hershberger
  • [U-Boot] [PATCH v5 0/5] net: fec_mxc: Convert to DM   Jagan Teki
• [U-Boot] Display output in LCD   Othmane Essamlali
• [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Vignesh R
  • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Vignesh R
    • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Vignesh R
      • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Jagan Teki
      • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Jagan Teki
      • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Vignesh R
      • [U-Boot] [PATCH] spi: cadence_qspi_apb: Improve indirect write transaction   Marek Vasut
• [U-Boot] MII and Ethernet chip are not detected in my envirnoment console   chethan.g
• [U-Boot] [PATCH] Add support for the topic-miami system-on-modules and carrier boards   Michal Simek
• [U-Boot] [PATCH v2 0/9] sunxi: sun5/7i: add the psci suspend function   Antoine Tenart
  • [U-Boot] [PATCH v2 1/9] ARM: add the ARM_GIC configuration option   Antoine Tenart
  • [U-Boot] [PATCH v2 3/9] ARM: select ARM_GIC for SoCs having a psci implementation   Antoine Tenart
  • [U-Boot] [PATCH v2 4/9] exynos: select ARM_GIC for TARGET_ARNDALE   Antoine Tenart
  • [U-Boot] [PATCH v2 5/9] tegra: select ARM_GIC for Tegra TK1s   Antoine Tenart
    • [U-Boot] [PATCH v2 5/9] tegra: select ARM_GIC for Tegra TK1s   Stephen Warren
      • [U-Boot] [PATCH v2 5/9] tegra: select ARM_GIC for Tegra TK1s   Antoine Tenart
  • [U-Boot] [PATCH v2 6/9] ARM: PSCI: protect GIC specific code with ARM_GIC   Antoine Tenart
  • [U-Boot] [PATCH v2 7/9] sun5/7i: add an implementation of the psci suspend function   Antoine Tenart
  • [U-Boot] [PATCH v2 8/9] sun5i: add defines used by the PSCI code   Antoine Tenart
  • [U-Boot] [PATCH v2 9/9] sun5i: boot in non-secure mode by default   Antoine Tenart
  • [U-Boot] [PATCH v2 0/9] sunxi: sun5/7i: add the psci suspend function   Hans de Goede
• [U-Boot] [PATCH v2 2/9] sunxi: select ARM_GIC for sun[6789]i   Antoine Tenart
• [U-Boot] sf: proposed status register protect   George McCollister
  • [U-Boot] sf: proposed status register protect   Jagan Teki
    • [U-Boot] sf: proposed status register protect   George McCollister
      • [U-Boot] sf: proposed status register protect   Jagan Teki
      • [U-Boot] sf: proposed status register protect   George McCollister
• [U-Boot] [PATCH v1 1/4] sf: add ADDR_4B for 4byte address support   york sun
  • [U-Boot] [PATCH v1 1/4] sf: add ADDR_4B for 4byte address support   york sun
  • [U-Boot] [PATCH v1 1/4] sf: add ADDR_4B for 4byte address support   Jagan Teki
    • [U-Boot] [PATCH v1 1/4] sf: add ADDR_4B for 4byte address support   Yao Yuan
• [U-Boot] [PATCH v6 0/6] power: pmic: Add support for Palmas family of PMICs   Keerthy
• [U-Boot] [PATCH v4 00/11] binman: A tool for creating firmware images   Simon Glass
  • [U-Boot] [PATCH v4 01/11] binman: Introduce binman, a tool for building binary images   Simon Glass
    • [U-Boot] [PATCH v4 01/11] binman: Introduce binman, a tool for building binary images   Bin Meng
  • [U-Boot] [PATCH v4 02/11] binman: Add basic entry types for U-Boot   Simon Glass
  • [U-Boot] [PATCH v4 03/11] binman: Add support for building x86 ROMs   Simon Glass
  • [U-Boot] [PATCH v4 04/11] binman: Add support for u-boot.img as an input binary   Simon Glass
  • [U-Boot] [PATCH v4 05/11] binman: Add support for building x86 ROMs with SPL   Simon Glass
  • [U-Boot] [PATCH v4 06/11] binman: Add support for building x86 images with FSP/CMC   Simon Glass
  • [U-Boot] [PATCH v4 07/11] binman: Add a build rule for binman   Simon Glass
  • [U-Boot] [PATCH v4 08/11] binman: Allow configuration options to be used in .dts files   Simon Glass
  • [U-Boot] [PATCH v4 09/11] binman: Automatically include a U-Boot .dtsi file   Simon Glass
  • [U-Boot] [PATCH v4 10/11] sunxi: Use binman for sunxi boards   Simon Glass
  • [U-Boot] [PATCH v4 11/11] x86: Use binman all x86 boards   Simon Glass
    • [U-Boot] [PATCH v4 11/11] x86: Use binman all x86 boards   Simon Glass
      • [U-Boot] [PATCH v4 11/11] x86: Use binman all x86 boards   Bin Meng
      • [U-Boot] [PATCH v4 11/11] x86: Use binman all x86 boards   Simon Glass
• [U-Boot] [PATCH 1/6] arm: at91: mpddrc: add missing MPDDRC_MD defines   Andreas Bießmann
• [U-Boot] [RFC PATCH] bootm: fix ramdisk relocation   Cédric Le Goater
  • [U-Boot] [RFC PATCH] bootm: fix ramdisk relocation   Tom Rini
    • [U-Boot] [RFC PATCH] bootm: fix ramdisk relocation   Cédric Le Goater
• [U-Boot] [PATCH v2 1/5] arm: kirkwood: add support for Synology DS109 board   Walter Schweizer
  • [U-Boot] [PATCH v2 1/5] arm: kirkwood: add support for Synology DS109 board   Stefan Roese
• [U-Boot] [PATCH v2 2/5] arm: kirkwood: ds109 board is maintained   Walter Schweizer
• [U-Boot] [PATCH v2 3/5] arm: kirkwood: fix kirkwood initial setup   Walter Schweizer
• [U-Boot] [PATCH v2 4/5] arm: kirkwood: fix output enable settings   Walter Schweizer
• [U-Boot] [PATCH v2 5/5] arm: kirkwood: fix Synology board tag   Walter Schweizer
• [U-Boot] [PATCH v2] spi: fsl_qspi: Preserve endianness of QSPI MCR   York Sun
  • [U-Boot] [PATCH v2] spi: fsl_qspi: Preserve endianness of QSPI MCR   york sun
    • [U-Boot] [PATCH v2] spi: fsl_qspi: Preserve endianness of QSPI MCR   Jagan Teki
      • [U-Boot] [PATCH v2] spi: fsl_qspi: Preserve endianness of QSPI MCR   york sun
• [U-Boot] [PATCH 2/6] ARM: at91: clock: correct PRES offset for at91sam9x5   Andreas Bießmann
• [U-Boot] [PATCH 3/6] arm, at91: add icache support   Andreas Bießmann
• [U-Boot] [PATCH 4/6] arm, at91: add some missing fields in PIO struct   Andreas Bießmann
• [U-Boot] [PATCH 5/6] at91: add function to set IO drive   Andreas Bießmann
• [U-Boot] [PATCH 6/6] [RFC] at91: SPL clock fix for AT91SAM9G15 based boards.   Andreas Bießmann
• [U-Boot] serial: ns16550: Handle -ENOENT when requesting clock   Tom Rini
• [U-Boot] [U-Boot, v2, 01/27] spl: Move spl_board_load_image() into a generic header   Tom Rini
• [U-Boot] [U-Boot, v2, 02/27] spl: Add a parameter to spl_set_header_raw_uboot()   Tom Rini
• [U-Boot] [U-Boot, v2, 03/27] spl: Add a parameter to spl_parse_image_header()   Tom Rini
• [U-Boot] [U-Boot, v2, 04/27] spl: Add a parameter to jump_to_image_linux()   Tom Rini
• [U-Boot] [U-Boot, v2, 05/27] spl: Add function comments to spl_start_uboot()   Tom Rini
• [U-Boot] [U-Boot, v2, 06/27] spl: Kconfig: Move SPL_DISPLAY_PRINT to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 07/27] spl: Convert boot_device into a struct   Tom Rini
• [U-Boot] [U-Boot, v2, 08/27] spl: Add a way to declare an SPL image loader   Tom Rini
• [U-Boot] [U-Boot, v2, 09/27] spl: Convert spl_ram_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 10/27] spl: Convert spl_mmc_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 11/27] spl: Convert spl_ubi_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 12/27] spl: Convert spl_nand_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 13/27] spl: Convert spl_onenand_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 14/27] spl: Convert spl_nor_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 15/27] spl: Convert spl_ymodem_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 16/27] spl: Convert spl_usb_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 17/27] spl: Convert spl_sata_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 18/27] spl: spi: Move the generic SPI loader into common/spl   Tom Rini
• [U-Boot] [U-Boot, v2, 19/27] spl: Convert spl_spi_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 20/27] spi: Move freescale-specific code into a private header   Tom Rini
• [U-Boot] [U-Boot, v2, 21/27] spl: Convert spl_net_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 22/27] spl: Convert spl_board_load_image() to use linker list   Tom Rini
• [U-Boot] [U-Boot, v2, 23/27] spl: Pass spl_image as a parameter to load_image() methods   Tom Rini
• [U-Boot] [U-Boot, v2, 24/27] spl: Update ext functions to take an spl_image parameter   Tom Rini
• [U-Boot] [U-Boot, v2, 25/27] spl: Update fat functions to take an spl_image parameter   Tom Rini
• [U-Boot] [U-Boot, v2, 26/27] spl: Update spl_load_simple_fit() to take an spl_image param   Tom Rini
• [U-Boot] [U-Boot, v2, 27/27] spl: Make spl_boot_list a local variable   Tom Rini
• [U-Boot] ML: SPL: NOR: Add CONFIG_SPL_NOR_COPY_ENTIRE_IMAGE define to enable whole image copy from NOR   Tom Rini
• [U-Boot] Cash flash correction of do_load()   Tom Rini
  • [U-Boot] [PATCH v2] fs:When 'go' run the program by 'fatload', added the cache flush to prevent cache mismatch.   yoko
    • [U-Boot] [PATCH v2] fs:When 'go' run the program by 'fatload', added the cache flush to prevent cache mismatch.   James Chargin
      • [U-Boot] [PATCH v2] fs:When 'go' run the program by 'fatload', added the cache flush to prevent cache mismatch.   yoko
• [U-Boot] [PATCH 0/6] ARM: Introduce function to switch to hypervisor mode and enable LPAE   Keerthy
• [U-Boot] [PATCH v4 0/2] ARM: add support for Bananapi BPI-R1   Stephen Arnold
  • [U-Boot] [PATCH v4 1/2] ARM: sun7i: config: add config for Sinovoip/Bananapi R1   Stephen Arnold
  • [U-Boot] [PATCH v4 2/2] ARM: sun7i: dts: add support for Sinovoip/Bananapi R1   Stephen Arnold
  • [U-Boot] [PATCH v4 0/2] ARM: add support for Bananapi BPI-R1   Jagan Teki
  • [U-Boot] [PATCH v4 0/2] ARM: add support for Bananapi BPI-R1   Stephen Arnold
    • [U-Boot] [PATCH v5] ARM: sun71: dts: add support for Bananapi BPI-R1   Stephen Arnold
      • [U-Boot] [PATCH v5] ARM: sun71: dts: add support for Bananapi BPI-R1   Jagan Teki
      • [U-Boot] [PATCH v5] ARM: sun71: dts: add support for Bananapi BPI-R1   Stephen Arnold
      • [U-Boot] [PATCH v5] ARM: sun71: dts: add support for Bananapi BPI-R1   Jagan Teki
      • [U-Boot] [PATCH v5] ARM: sun71: dts: add support for Bananapi BPI-R1   Stephen Arnold
      • [U-Boot] [PATCH v5] ARM: sun71: dts: add support for Bananapi BPI-R1   Jagan Teki
    • [U-Boot] [PATCH v4 0/2] ARM: add support for Bananapi BPI-R1   Stephen Arnold
• [U-Boot] [PATCH v2 1/2] rockchip: use rockchip linux partitions layout   Jacob Chen
  • [U-Boot] [PATCH v2 2/2] rockchip: doc: add GPT partition layout   Jacob Chen
  • [U-Boot] [PATCH v2 1/2] rockchip: use rockchip linux partitions layout   Kever Yang
• [U-Boot] [PATCH v2] mmc: sdhci: Add the programmable clock mode support   Kever Yang
  • [U-Boot] [PATCH v2] mmc: sdhci: Add the programmable clock mode support   Jaehoon Chung
• [U-Boot] [PATCH] rk3399: disable the clock multiplier support when SoC init   Kever Yang
  • [U-Boot] [PATCH] rk3399: disable the clock multiplier support when SoC init   Simon Glass
    • [U-Boot] [PATCH] rk3399: disable the clock multiplier support when SoC init   Simon Glass
• [U-Boot] [PATCH] rk3288: fix reg address for GRF_SOC_CON2   Kever Yang
  • [U-Boot] [PATCH] rk3288: fix reg address for GRF_SOC_CON2   Simon Glass
    • [U-Boot] [PATCH] rk3288: fix reg address for GRF_SOC_CON2   Simon Glass
• [U-Boot] [PATCH] evb-rk3399: config: set emmc as default boot dev   Kever Yang
  • [U-Boot] [PATCH] evb-rk3399: config: set emmc as default boot dev   Simon Glass
    • [U-Boot] [PATCH] evb-rk3399: config: set emmc as default boot dev   Simon Glass
• [U-Boot] [PATCH v2 0/3] Enable DM support for USB in LS2080   Sriram Dash
• [U-Boot] [PATCH v2 1/3] armv8: LS2080A: Add device tree support for nand boot   Sriram Dash
  • [U-Boot] [PATCH v2 1/3] armv8: LS2080A: Add device tree support for nand boot   york sun
• [U-Boot] [PATCH v2 2/3] armv8: ls2080: Enable CONFIG_DM_USB in defconfigs   Sriram Dash
• [U-Boot] [PATCH v2 3/3] armv8: ls2080: Add USB node in dts for ls2080   Sriram Dash
• [U-Boot] [PATCH] mmc: rockchip_sdhci: add clock init for mmc   Kever Yang
  • [U-Boot] [PATCH] mmc: rockchip_sdhci: add clock init for mmc   Jaehoon Chung
    • [U-Boot] [PATCH] mmc: rockchip_sdhci: add clock init for mmc   Kever Yang
• [U-Boot] [PATCH] test: add NFS download test   Guillaume Gardet
• [U-Boot] [PATCH v3 0/3] Add sdram capacity auto detect for rk3288   Kever Yang
  • [U-Boot] [PATCH v3 1/3] rk3288: config change for enable dram capacity auto-detect.   Kever Yang
    • [U-Boot] [PATCH v3 1/3] rk3288: config change for enable dram capacity auto-detect.   Simon Glass
      • [U-Boot] [PATCH v3 1/3] rk3288: config change for enable dram capacity auto-detect.   Simon Glass
  • [U-Boot] [PATCH v3 2/3] rk3288: sdram: auto-detect the capacity   Kever Yang
    • [U-Boot] [PATCH v3 2/3] rk3288: sdram: auto-detect the capacity   Vagrant Cascadian
      • [U-Boot] [PATCH v3 2/3] rk3288: sdram: auto-detect the capacity   Simon Glass
      • [U-Boot] [PATCH v3 2/3] rk3288: sdram: auto-detect the capacity   Simon Glass
  • [U-Boot] [PATCH v3 3/3] dts: rk3288: remove node in dmc which not need anymore   Kever Yang
    • [U-Boot] [PATCH v3 3/3] dts: rk3288: remove node in dmc which not need anymore   Simon Glass
      • [U-Boot] [PATCH v3 3/3] dts: rk3288: remove node in dmc which not need anymore   Simon Glass
• [U-Boot] [PATCH] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Stefano Babic
• [U-Boot] Bug: Support for EON NOR SPI is broken   Champ, Andy
• [U-Boot] [U-Boot, RFC] ARM: create .secure_stack section only for PSCI   Tom Rini
  • [U-Boot] [U-Boot, RFC] ARM: create .secure_stack section only for PSCI   Tom Rini
• [U-Boot] [PATCH v2] ARM: vf610: use strcpy for soc environment variable   Stefano Babic
• [U-Boot] [PATCH v2] board: ge: bx50v3: Pass video bootargs for b850v3   Akshay Bhat
  • [U-Boot] EXT: [PATCH v2] board: ge: bx50v3: Pass video bootargs for b850v3   Martin Donnelly
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
  • [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
  • [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
    • [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   linux-kernel-dev at beckhoff.com
  • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Stefano Babic
    • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Patrick Brünn
  • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Jagan Teki
    • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Stefano Babic
      • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Patrick Brünn
      • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Jagan Teki
      • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   linux-kernel-dev
      • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Jagan Teki
      • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   linux-kernel-dev
  • [U-Boot] [PATCH v2] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Jagan Teki
• [U-Boot] [PATCH] ARM: uniphier: do not setup pins for System Bus on NAND boot mode   Masahiro Yamada
• [U-Boot] [PATCH 1/1]: nand bootupdate for i.MX6 -- REBASED   Sergey Kubushyn
  • [U-Boot] [PATCH 1/1]: nand bootupdate for i.MX6 -- REBASED   Jagan Teki
• [U-Boot] [PATCH][v3] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS   Pratiyush Srivastava
  • [U-Boot] [PATCH][v3] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS   york sun
• [U-Boot] [PATCH][v4] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS   Pratiyush Srivastava
  • [U-Boot] [PATCH][v4] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS   york sun
• [U-Boot] [PATCH] cosmetic: Fix indentation in README   Alexander von Gernler
• [U-Boot] [PATCH v2] Added nand bootupdate command for i.MX6 and similar systems   Sergey Kubushyn
  • [U-Boot] [PATCH v2] Added nand bootupdate command for i.MX6 and similar systems   Fabio Estevam
    • [U-Boot] [PATCH v2] Added nand bootupdate command for i.MX6 and similar systems   Fabio Estevam
    • [U-Boot] [PATCH v2] Added nand bootupdate command for i.MX6 and similar systems   Sergey Kubushyn
      • [U-Boot] [PATCH v2] Added nand bootupdate command for i.MX6 and similar systems   Fabio Estevam
      • [U-Boot] [PATCH v2] Added nand bootupdate command for i.MX6 and similar systems   Sergey Kubushyn
• [U-Boot] [PATCH] dm: ehci-mx6: support driver model   Peng Fan
• [U-Boot] [PATCH v3] Add nand bootupdate command for i.MX6 and similar platforms   Sergey Kubushyn
  • [U-Boot] [PATCH v3] Add nand bootupdate command for i.MX6 and similar platforms   Sergey Kubushyn
• [U-Boot] [PATCH 0/9] ARM: uniphier: UniPhier updates for v2016.11-rc2   Masahiro Yamada
  • [U-Boot] [PATCH 1/9] ARM: uniphier: enable SSC for DPLL (DRAM PLL) on LD11 SoC   Masahiro Yamada
  • [U-Boot] [PATCH 5/9] ARM: uniphier: enable CONFIG_SYS_NO_FLASH if no CONFIG_MICRO_SUPPORT_CARD   Masahiro Yamada
  • [U-Boot] [PATCH 6/9] ARM: uniphier: define CONFIG_SMC911X along with CONFIG_MICRO_SUPPORT_CARD   Masahiro Yamada
  • [U-Boot] [PATCH 7/9] ARM: uniphier: insert udelay() just before support_card_reset_deassert()   Masahiro Yamada
  • [U-Boot] [PATCH 8/9] reset: declare fdtdec_phandle_args as struct to fix warning   Masahiro Yamada
    • [U-Boot] [PATCH 8/9] reset: declare fdtdec_phandle_args as struct to fix warning   Masahiro Yamada
    • [U-Boot] [PATCH 8/9] reset: declare fdtdec_phandle_args as struct to fix warning   Simon Glass
  • [U-Boot] [PATCH 9/9] reset: uniphier: add reset controller driver for UniPhier SoCs   Masahiro Yamada
  • [U-Boot] [PATCH 0/9] ARM: uniphier: UniPhier updates for v2016.11-rc2   Masahiro Yamada
• [U-Boot] [PATCH 2/9] ARM: uniphier: update DRAM init code for LD20 SoC (2nd)   Masahiro Yamada
• [U-Boot] [PATCH 3/9] ARM: uniphier: add work-around for VBO noise problem   Masahiro Yamada
• [U-Boot] [PATCH 4/9] ARM: uniphier: fix typos in a comment block   Masahiro Yamada
• [U-Boot] [PATCH v3 1/2] rockchip: use rockchip linux partitions layout   Jacob Chen
  • [U-Boot] [PATCH v3 2/2] rockchip: doc: add GPT partition layout   Jacob Chen
    • [U-Boot] [PATCH v3 2/2] rockchip: doc: add GPT partition layout   Simon Glass
      • [U-Boot] [PATCH v3 2/2] rockchip: doc: add GPT partition layout   Simon Glass
  • [U-Boot] [PATCH v3 1/2] rockchip: use rockchip linux partitions layout   Kever Yang
    • [U-Boot] [PATCH v3 1/2] rockchip: use rockchip linux partitions layout   Simon Glass
      • [U-Boot] [PATCH v3 1/2] rockchip: use rockchip linux partitions layout   Simon Glass
• [U-Boot] [PATCH v7 0/2] armv8: Support loading 32-bit OS in AArch32 execution state   Alison Wang
  • [U-Boot] [PATCH v7 2/2] armv8: fsl-layerscape: SMP support for loading 32-bit OS   Alison Wang
• [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   Alison Wang
  • [U-Boot] [PATCH v7 1/2] armv8: Support loading 32-bit OS in AArch32 execution state   york sun
• [U-Boot] [PATCH V3 2/8] imx: mx6: Add plugin support   Peng Fan
• [U-Boot] [PATCH V3 3/8] imx: mx7: Add plugin support   Peng Fan
• [U-Boot] [PATCH V3 4/8] imx-common: inctroude USE_IMXIMG_PLUGIN Kconfig   Peng Fan
  • [U-Boot] [PATCH V3 4/8] imx-common: inctroude USE_IMXIMG_PLUGIN Kconfig   Eric Nelson
    • [U-Boot] [PATCH V3 4/8] imx-common: inctroude USE_IMXIMG_PLUGIN Kconfig   Peng Fan
• [U-Boot] [PATCH V3 5/8] imx-common: compile plugin code   Peng Fan
• [U-Boot] [PATCH V3 6/8] imx: mx6ullevk: support plugin   Peng Fan
• [U-Boot] [PATCH V3 7/8] imx: mx6ullevk: correct boot device macro   Peng Fan
• [U-Boot] [PATCH V3 8/8] imx: mx6ull_14x14_evk: add plugin defconfig   Peng Fan
• [U-Boot] [PATCH] rk3288: kconfig: remove duplicate definition of SPL_MMC_SUPPORT   Kever Yang
  • [U-Boot] [PATCH] rk3288: kconfig: remove duplicate definition of SPL_MMC_SUPPORT   Simon Glass
    • [U-Boot] [PATCH] rk3288: kconfig: remove duplicate definition of SPL_MMC_SUPPORT   Simon Glass
• [U-Boot] [PATCH] rockchip: enable SPL_OF_PLATDATA for rk3288 board   陈豪
  • [U-Boot] [PATCH] rockchip: enable SPL_OF_PLATDATA for rk3288 board   Simon Glass
• [U-Boot] [PATCH] imx: mx6sx: Disable ENET clock before switching clock parent   Peng Fan
  • [U-Boot] [PATCH] imx: mx6sx: Disable ENET clock before switching clock parent   Peng Fan
• [U-Boot] [PATCH] imx: mx6ull: update the REFTOP_VBGADJ setting   Peng Fan
  • [U-Boot] [PATCH] imx: mx6ull: update the REFTOP_VBGADJ setting   Peng Fan
• [U-Boot] [PATCH] common: env: add kconfig entry for env storage   Peng Fan
  • [U-Boot] [PATCH] common: env: add kconfig entry for env storage   Simon Glass
    • [U-Boot] [PATCH] common: env: add kconfig entry for env storage   Tom Rini
      • [U-Boot] [PATCH] common: env: add kconfig entry for env storage   Heiko Schocher
• [U-Boot] [PATCH] mmc: introduce mmc_power_init   Peng Fan
  • [U-Boot] [PATCH] mmc: introduce mmc_power_init   Jaehoon Chung
    • [U-Boot] [PATCH] mmc: introduce mmc_power_init   Peng Fan
      • [U-Boot] [PATCH] mmc: introduce mmc_power_init   Jaehoon Chung
• [U-Boot] [PATCH] arm: psci: save and restore registers from r4 to r12   Chenhui Zhao
  • [U-Boot] [PATCH] arm: psci: save and restore registers from r4 to r12   Chenhui Zhao
  • [U-Boot] [PATCH] arm: psci: save and restore registers from r4 to r12   Chen-Yu Tsai
    • [U-Boot] [PATCH] arm: psci: save and restore registers from r4 to r12   C.H. Zhao
    • [U-Boot] [PATCH] arm: psci: save and restore registers from r4 to r12   Chenhui Zhao
      • [U-Boot] [PATCH] arm: psci: save and restore registers from r4 to r12   Chen-Yu Tsai
• [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
  • [U-Boot] [PATCH v7 01/21] serial: Kconfig: Add MXC_UART entry   Jagan Teki
  • [U-Boot] [PATCH v7 02/21] thermal: Kconfig: Add IMX_THERMAL entry   Jagan Teki
  • [U-Boot] [PATCH v7 03/21] config: Move CONFIG_DEFAULT_FDT_FILE to defconfigs   Jagan Teki
  • [U-Boot] [PATCH v7 04/21] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support   Jagan Teki
  • [U-Boot] [PATCH v7 05/21] net: Kconfig: Add FEC_MXC entry   Jagan Teki
  • [U-Boot] [PATCH v7 06/21] imx6: icorem6: Add ENET support   Jagan Teki
  • [U-Boot] [PATCH v7 07/21] imx: s/docs\/README.imximage/doc\/README.imximage/g   Jagan Teki
  • [U-Boot] [PATCH v7 08/21] arm: dts: Add devicetree for i.MX6DL   Jagan Teki
  • [U-Boot] [PATCH v7 09/21] arm: dts: Add devicetree for i.MX6DQL   Jagan Teki
  • [U-Boot] [PATCH v7 10/21] arm: dts: imx6dl: Add pinctrl defines   Jagan Teki
  • [U-Boot] [PATCH v7 11/21] dt-bindings: clock: imx6qdl: Add clock defines   Jagan Teki
  • [U-Boot] [PATCH v7 12/21] arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo   Jagan Teki
  • [U-Boot] [PATCH v7 13/21] imx6q: icorem6: Enable pinctrl driver   Jagan Teki
  • [U-Boot] [PATCH v7 14/21] engicam: icorem6: Add DM_GPIO, DM_MMC support   Jagan Teki
  • [U-Boot] [PATCH v7 15/21] arm: dts: Add devicetree for i.MX6Q   Jagan Teki
  • [U-Boot] [PATCH v7 16/21] arm: dts: imx6q: Add pinctrl defines   Jagan Teki
  • [U-Boot] [PATCH v7 17/21] arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual   Jagan Teki
  • [U-Boot] [PATCH v7 18/21] mtd: nand: Kconfig: Add NAND_MXS entry   Jagan Teki
    • [U-Boot] [PATCH v7 18/21] mtd: nand: Kconfig: Add NAND_MXS entry   Jörg Krause
      • [U-Boot] [PATCH v7 18/21] mtd: nand: Kconfig: Add NAND_MXS entry   Sergey Kubushyn
      • [U-Boot] [PATCH v7 18/21] mtd: nand: Kconfig: Add NAND_MXS entry   Jagan Teki
      • [U-Boot] [PATCH v7 18/21] mtd: nand: Kconfig: Add NAND_MXS entry   Jörg Krause
  • [U-Boot] [PATCH v7 19/21] imx6: icorem6: Add NAND support   Jagan Teki
  • [U-Boot] [PATCH v7 20/21] imx6: icorem6: Enable MTD device support   Jagan Teki
  • [U-Boot] [PATCH v7 21/21] imx6: icorem6: Add default mtd nand partition table   Jagan Teki
  • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
    • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Stefano Babic
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
      • [U-Boot] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
• [U-Boot] [PATCH V3 1/8] tools: imximage: add plugin support   Eric Nelson
  • [U-Boot] [PATCH V3 1/8] tools: imximage: add plugin support   Peng Fan
  • [U-Boot] [PATCH V3 1/8] tools: imximage: add plugin support   Peng Fan
    • [U-Boot] [PATCH V3 1/8] tools: imximage: add plugin support   Eric Nelson
      • [U-Boot] [PATCH V3 1/8] tools: imximage: add plugin support   Peng Fan
      • [U-Boot] [PATCH V3 1/8] tools: imximage: add plugin support   Eric Nelson
      • [U-Boot] [PATCH V3 1/8] tools: imximage: add plugin support   Eric Nelson
• [U-Boot] gunzip: cache-align write buffer memory   Tom Rini
• [U-Boot] [U-Boot, 1/6] tools/env: factor out environment_end function   Tom Rini
• [U-Boot] [U-Boot, 2/6] tools/env: pass bad block offset by value   Tom Rini
• [U-Boot] [U-Boot, 3/6] tools/env: lookup dev_type directly from flash_read_buf/flash_write_buf   Tom Rini
• [U-Boot] Suspected Spam: Do not open attachements![PATCH 4/6] tools/env: flash_write_buf: enforce offset to be start of environment   Tom Rini
• [U-Boot] ARM: Respect CONFIG_SPL_STACK define in lowlevel_init.S   Tom Rini
• [U-Boot] ARMv8/sec-firmware: fix a compile error   Tom Rini
• [U-Boot] Various, accumulated typos collected from around the tree.   Tom Rini
• [U-Boot] search.h: Numerous grammatical fixes, comment updates   Tom Rini
• [U-Boot] cmd/onenand.c: block align warning   Tom Rini
• [U-Boot] [U-Boot, v2] ARM64: Add support for some of atomic64 operations   Tom Rini
• [U-Boot] PWM: Correct misspellings of "module" in context of PWM   Tom Rini
• [U-Boot] [U-Boot, 1/6] omap: Remove hardcoding of mmu section shift to 20   Tom Rini
• [U-Boot] [U-Boot, 2/6] omap: Set appropriate cache configuration for LPAE and non-LAPE cases   Tom Rini
• [U-Boot] [U-Boot, 3/6] configs: am57xx_evm_defconfig: Enable LPAE mode   Tom Rini
• [U-Boot] [U-Boot, 4/6] configs: dra7xx_evm_defconfig: Enable LPAE mode   Tom Rini
• [U-Boot] [U-Boot, 5/6] ARM: Introduce function to switch to hypervisor mode   Tom Rini
• [U-Boot] [U-Boot, 6/6] ARM: OMAP5+: Override switch_to_hypervisor function   Tom Rini
• [U-Boot] doc: typo fix addess -> address   Tom Rini
• [U-Boot] ARM: Add register defines for am33xx ePWM registers   Tom Rini
• [U-Boot] [U-Boot, PATCHv2] scripts: Add script to extract default environment   Tom Rini
• [U-Boot] cmd: Make CMD_USB_MASS_STORAGE visible only with USB_GADGET and default y   Tom Rini
  • [U-Boot] cmd: Make CMD_USB_MASS_STORAGE visible only with USB_GADGET and default y   Tom Rini
• [U-Boot] arm: dra7xx: Move fastboot options to defconfig   Tom Rini
• [U-Boot] [U-Boot, RFC, v1] common/console.c: ensure GD_FLG_SILENT is set or cleared   Tom Rini
• [U-Boot] [U-Boot, v2] vexpress: disable cci ace slave ports when booting in non-sec/hyp mode   Tom Rini
• [U-Boot] [U-Boot, v3, 1/3] build-whitelist: do not add new options to whitelist when update   Tom Rini
• [U-Boot] [U-Boot,v3,2/3] config_whitelist: sync by tool   Tom Rini
• [U-Boot] [U-Boot, v3, 3/3] config_whitelist: remove bogus options   Tom Rini
• [U-Boot] [U-Boot, 1/5] check-config: fix wrong comment about how to build whitelist   Tom Rini
• [U-Boot] [U-Boot, 2/5] kbuild: move no_new_adhoc_configs_check to "all" target command   Tom Rini
• [U-Boot] [U-Boot, 3/5] kbuild: make dependencies in scripts/Makefile.autoconf more readable   Tom Rini
• [U-Boot] [U-Boot, 4/5] kbuild: generate u-boot.cfg as a byproduct of include/autoconf.mk   Tom Rini
• [U-Boot] [U-Boot, 1/3] ARM: keystone: remove declaration of unused functions   Tom Rini
• [U-Boot] [U-Boot, 2/3] ARM: keystone: rename clk_get_rate() to ks_clk_get_rate()   Tom Rini
• [U-Boot] [U-Boot, 3/3] Revert "ns16650: Make sure we have CONFIG_CLK set before using infrastructure"   Tom Rini
• [U-Boot] dra7xx: config: cleanup: moved to kconfig for CONFIG_SPL_ENV_SUPPORT   Tom Rini
• [U-Boot] dra7x: dfu: qspi: increase the qspi spl partition to 256K   Tom Rini
• [U-Boot] env: tool: add command line option to input lockfile path   Tom Rini
• [U-Boot] arm: Add return value argument to longjmp   Tom Rini
• [U-Boot] [U-Boot,1/2] ARM: dts: dra72: add rev C evm support   Tom Rini
• [U-Boot] [U-Boot, 2/2] board: ti: dra7xx: complex definitions should be protected with parentheses   Tom Rini
• [U-Boot] cros_ec: Honor the google,remote-bus dt property   Tom Rini
• [U-Boot] [U-Boot, v1] spl: saveenv: adding saveenv support in SPL   Tom Rini
• [U-Boot] Please pull fsl-qoriq master   york sun
  • [U-Boot] Please pull fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH 1/2] armv8: fsl-lsch2: adjust sata parameter   york sun
• [U-Boot] [PATCH 2/2] armv8: fsl-lsch2: enable snoopable sata read and write   york sun
• [U-Boot] [PATCH] fsl_sec_mon: Update driver for Security Monitor   york sun
• [U-Boot] [PATCH] armv7: LS1021a: enable i-cache in start.S   york sun
  • [U-Boot] [PATCH] armv7: LS1021a: enable i-cache in start.S   Xiaoliang Yang
• [U-Boot] [PATCH v2] fsl_sfp : Modify macros as per changes in SFP v3.4   york sun
• [U-Boot] [PATCH] armv8/fsl-layerscape: print SoC revsion number   york sun
• [U-Boot] [PATCH] armv8: fsl-layerscape: Fix "cpu status" command   york sun
• [U-Boot] [PATCH v2] ARMv7: LS102xA: Move two macros from header files to Kconfig   york sun
• [U-Boot] [PATCH] armv8/fsl-lsch2: Implement workaround for PIN MUX erratum A010539   york sun
• [U-Boot] [PATCH 1/2] armv8: ls1043: Enable CONFIG_DM_USB in defconfigs   york sun
• [U-Boot] [PATCH 2/2] armv8: ls1043: Add USB node in dts for ls1043   york sun
• [U-Boot] [PATCH v2] Add support for eMMC environment in boot partition   Sergey Kubushyn
  • [U-Boot] [PATCH v2] Add support for eMMC environment in boot partition   Jaehoon Chung
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
  • [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PATCH 00/11] x86: dm: video: Convert to use DM video drivers on all x86 boards   Bin Meng
  • [U-Boot] [PATCH 03/11] dm: video: Output verbose information in vbe_setup_video()   Bin Meng
    • [U-Boot] [PATCH 03/11] dm: video: Output verbose information in vbe_setup_video()   Simon Glass
      • [U-Boot] [PATCH 03/11] dm: video: Output verbose information in vbe_setup_video()   Bin Meng
  • [U-Boot] [PATCH 04/11] x86: Convert to use DM VESA video driver   Bin Meng
    • [U-Boot] [PATCH 04/11] x86: Convert to use DM VESA video driver   Simon Glass
      • [U-Boot] [PATCH 04/11] x86: Convert to use DM VESA video driver   Bin Meng
  • [U-Boot] [PATCH 05/11] x86: doc: Correct qfw command example   Bin Meng
    • [U-Boot] [PATCH 05/11] x86: doc: Correct qfw command example   Simon Glass
      • [U-Boot] [PATCH 05/11] x86: doc: Correct qfw command example   Bin Meng
  • [U-Boot] [PATCH 06/11] vbe: Make vbe_setup_video_priv() public   Bin Meng
    • [U-Boot] [PATCH 06/11] vbe: Make vbe_setup_video_priv() public   Simon Glass
      • [U-Boot] [PATCH 06/11] vbe: Make vbe_setup_video_priv() public   Bin Meng
  • [U-Boot] [PATCH 07/11] dm: video: Add driver for coreboot framebuffer device   Bin Meng
    • [U-Boot] [PATCH 07/11] dm: video: Add driver for coreboot framebuffer device   Simon Glass
      • [U-Boot] [PATCH 07/11] dm: video: Add driver for coreboot framebuffer device   Bin Meng
  • [U-Boot] [PATCH 08/11] dm: video: Don't do anything in alloc_fb() when plat->size is zero   Bin Meng
    • [U-Boot] [PATCH 08/11] dm: video: Don't do anything in alloc_fb() when plat->size is zero   Simon Glass
      • [U-Boot] [PATCH 08/11] dm: video: Don't do anything in alloc_fb() when plat->size is zero   Bin Meng
  • [U-Boot] [PATCH 09/11] x86: coreboot: Convert to use DM coreboot video driver   Bin Meng
    • [U-Boot] [PATCH 09/11] x86: coreboot: Convert to use DM coreboot video driver   Simon Glass
      • [U-Boot] [PATCH 09/11] x86: coreboot: Convert to use DM coreboot video driver   Bin Meng
  • [U-Boot] [PATCH 10/11] video: Remove legacy VESA and coreboot framebuffer drivers   Bin Meng
    • [U-Boot] [PATCH 10/11] video: Remove legacy VESA and coreboot framebuffer drivers   Simon Glass
      • [U-Boot] [PATCH 10/11] video: Remove legacy VESA and coreboot framebuffer drivers   Bin Meng
  • [U-Boot] [PATCH 11/11] x86: Clean up unused macros in the configuration headers   Bin Meng
    • [U-Boot] [PATCH 11/11] x86: Clean up unused macros in the configuration headers   Simon Glass
      • [U-Boot] [PATCH 11/11] x86: Clean up unused macros in the configuration headers   Bin Meng
• [U-Boot] [PATCH 01/11] x86: doc: Document coreboot framebuffer driver issue on QEMU   Bin Meng
  • [U-Boot] [PATCH 01/11] x86: doc: Document coreboot framebuffer driver issue on QEMU   Simon Glass
    • [U-Boot] [PATCH 01/11] x86: doc: Document coreboot framebuffer driver issue on QEMU   Bin Meng
• [U-Boot] [PATCH 02/11] dm: video: Add driver for VESA compatible device   Bin Meng
  • [U-Boot] [PATCH 02/11] dm: video: Add driver for VESA compatible device   Simon Glass
    • [U-Boot] [PATCH 02/11] dm: video: Add driver for VESA compatible device   Bin Meng
• [U-Boot] [PATCH] pinctrl: uniphier: fix unused-const-variable warnings for GCC 6.x   Masahiro Yamada
  • [U-Boot] [PATCH] pinctrl: uniphier: fix unused-const-variable warnings for GCC 6.x   Masahiro Yamada
    • [U-Boot] [PATCH] pinctrl: uniphier: fix unused-const-variable warnings for GCC 6.x   Marek Vasut
• [U-Boot] [PATCH 0/3] ext4: cleanup/fix unlink_filename function   Stefan Brüns
  • [U-Boot] [PATCH 0/3] ext4: cleanup/fix unlink_filename function   Tom Rini
• [U-Boot] [PATCH 1/3] ext4: cleanup unlink_filename function   Stefan Brüns
  • [U-Boot] [PATCH 1/3] ext4: cleanup unlink_filename function   Tom Rini
  • [U-Boot] [U-Boot,1/3] ext4: cleanup unlink_filename function   Tom Rini
• [U-Boot] [PATCH 2/3] ext4: Fix handling of direntlen in unlink_filename   Stefan Brüns
  • [U-Boot] [PATCH 2/3] ext4: Fix handling of direntlen in unlink_filename   Tom Rini
  • [U-Boot] [PATCH 2/3] ext4: Fix handling of direntlen in unlink_filename   Lukasz Majewski
  • [U-Boot] [U-Boot, 2/3] ext4: Fix handling of direntlen in unlink_filename   Tom Rini
• [U-Boot] [PATCH 3/3] ext4: Only write journal entries for modified blocks in unlink_filename   Stefan Brüns
  • [U-Boot] [PATCH 3/3] ext4: Only write journal entries for modified blocks in unlink_filename   Tom Rini
  • [U-Boot] [PATCH 3/3] ext4: Only write journal entries for modified blocks in unlink_filename   Lukasz Majewski
  • [U-Boot] [U-Boot, 3/3] ext4: Only write journal entries for modified blocks in unlink_filename   Tom Rini
• [U-Boot] [PATCH v4 2/7] efi_loader: Fix memory map size check to avoid out-of-bounds access   Stefan Brüns
  • [U-Boot] [PATCH v4 2/7] efi_loader: Fix memory map size check to avoid out-of-bounds access   Alexander Graf
  • [U-Boot] [U-Boot, v4, 2/7] efi_loader: Fix memory map size check to avoid out-of-bounds access   Alexander Graf
• [U-Boot] [PATCH v4 3/7] efi_loader: Move efi_allocate_pool implementation to efi_memory.c   Stefan Brüns
  • [U-Boot] [PATCH v4 3/7] efi_loader: Move efi_allocate_pool implementation to efi_memory.c   Alexander Graf
  • [U-Boot] [U-Boot, v4, 3/7] efi_loader: Move efi_allocate_pool implementation to efi_memory.c   Alexander Graf
• [U-Boot] [PATCH v4 4/7] efi_loader: Track size of pool allocations to allow freeing   Stefan Brüns
  • [U-Boot] [PATCH v4 4/7] efi_loader: Track size of pool allocations to allow freeing   Alexander Graf
  • [U-Boot] [U-Boot, v4, 4/7] efi_loader: Track size of pool allocations to allow freeing   Alexander Graf
• [U-Boot] pull request: u-boot-uniphier/master   Masahiro Yamada
  • [U-Boot] pull request: u-boot-uniphier/master   Tom Rini
  • [U-Boot] pull request: u-boot-uniphier/master   Masahiro Yamada
    • [U-Boot] pull request: u-boot-uniphier/master   Tom Rini
  • [U-Boot] pull request: u-boot-uniphier/master   Masahiro Yamada
    • [U-Boot] pull request: u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH] cmd/nand.c: Debug additional helpful NAND info   Ahmed Samir Khalil
• [U-Boot] [PATCH] cmd/nand.c: Remove unnecessarily repeated step   Ahmed Samir Khalil
  • [U-Boot] [PATCH] cmd/nand.c: Remove unnecessarily repeated step   Benoît Thébaudeau
• [U-Boot] [PATCH] pci: Move CONFIG_PCI_PNP to Kconfig   Bin Meng
  • [U-Boot] [PATCH] pci: Move CONFIG_PCI_PNP to Kconfig   Tom Rini
    • [U-Boot] [PATCH] pci: Move CONFIG_PCI_PNP to Kconfig   Bin Meng
      • [U-Boot] [PATCH] pci: Move CONFIG_PCI_PNP to Kconfig   Tom Rini
  • [U-Boot] [PATCH] pci: Move CONFIG_PCI_PNP to Kconfig   Bin Meng
    • [U-Boot] [PATCH] pci: Move CONFIG_PCI_PNP to Kconfig   Tom Rini
      • [U-Boot] [PATCH] pci: Move CONFIG_PCI_PNP to Kconfig   Bin Meng
      • [U-Boot] [PATCH] pci: Move CONFIG_PCI_PNP to Kconfig   Tom Rini
    • [U-Boot] [PATCH v3] pci: Move CONFIG_PCI_PNP to Kconfig   Tom Rini
      • [U-Boot] [PATCH v3] pci: Move CONFIG_PCI_PNP to Kconfig   Tom Rini
• [U-Boot] [PATCH v2] mmc: s5p_sdhci: support the Driver model for Exynos   Jaehoon Chung
• [U-Boot] [PATCH] mmc: dw_mmc: remove the unnecessary arguments for dwmci_setup_cfg   Jaehoon Chung
• [U-Boot] [PATCH v2 2/2] mmc: sdhci: use the generic error number   Jaehoon Chung
• [U-Boot] [PATCH 1/2] mmc: sdhci: use the host version value in sdhci_setup_cfg   Jaehoon Chung
• [U-Boot] [PATCH 07/82] mmc: Fix cast for 64-bit compilation   Jaehoon Chung
  • [U-Boot] [PATCH 07/82] mmc: Fix cast for 64-bit compilation   Bin Meng
    • [U-Boot] [PATCH 07/82] mmc: Fix cast for 64-bit compilation   Jaehoon Chung
  • [U-Boot] [PATCH 07/82] mmc: Fix cast for 64-bit compilation   Bin Meng
• [U-Boot] Patch for OLinuXino Lime boards: default DRAM settings   Hans de Goede
• [U-Boot] [PATCH] sunxi: Fix H3 DRAM impedance calibration on rev. A chips   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
  • [U-Boot] Please pull u-boot-sunxi master   Tom Rini
  • [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
    • [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()   Minghuan Lian
  • [U-Boot] [PATCH 2/9] dm: pci: remove pci_bus_to_hose(0) calling   Minghuan Lian
    • [U-Boot] [PATCH 2/9] dm: pci: remove pci_bus_to_hose(0) calling   Bin Meng
      • [U-Boot] [PATCH 2/9] dm: pci: remove pci_bus_to_hose(0) calling   M.H. Lian
  • [U-Boot] [PATCH 3/9] arm: ls1021a: add PCIe dts node   Minghuan Lian
  • [U-Boot] [PATCH 4/9] arm: ls1012a: add PCIe dts node   Minghuan Lian
  • [U-Boot] [PATCH 5/9] armv8: ls1043a: add PCIe dts node   Minghuan Lian
  • [U-Boot] [PATCH 7/9] armv8: ls2080a: add PCIe dts node   Minghuan Lian
  • [U-Boot] [PATCH 8/9] pci: layerscape: rewrite pci driver based on DM   Minghuan Lian
    • [U-Boot] [PATCH 8/9] pci: layerscape: rewrite pci driver based on DM   Bin Meng
      • [U-Boot] [PATCH 8/9] pci: layerscape: rewrite pci driver based on DM   M.H. Lian
      • [U-Boot] [PATCH 8/9] pci: layerscape: rewrite pci driver based on DM   Bin Meng
  • [U-Boot] [PATCH 9/9] armv8: ls1046a: Enable PCIe support   Minghuan Lian
  • [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()   Bin Meng
    • [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()   M.H. Lian
    • [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()   Bin Meng
      • [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()   M.H. Lian
      • [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()   Bin Meng
      • [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()   M.H. Lian
      • [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()   Bin Meng
      • [U-Boot] [PATCH 1/9] dm: pci: return the real controller in pci_bus_to_hose()   M.H. Lian
• [U-Boot] [PATCH 6/9] armv8: ls1046a: add PCIe dts node   Minghuan Lian
• [U-Boot] [PATCH 9/9] armv8: ls1046a: Enable PCIe support   Minghuan Lian
  • [U-Boot] [PATCH 9/9] armv8: ls1046a: Enable PCIe support   Bin Meng
    • [U-Boot] [PATCH 9/9] armv8: ls1046a: Enable PCIe support   M.H. Lian
• [U-Boot] AHCI controller not found   Ding, ChiX
• [U-Boot] [PATCH 0/3] Add Atheros phy delay support and CPSW RGMII id support   Mugunthan V N
  • [U-Boot] [PATCH 2/3] include: configs: am335x: add Atheros phy support   Mugunthan V N
    • [U-Boot] [PATCH 2/3] include: configs: am335x: add Atheros phy support   Joe Hershberger
  • [U-Boot] [PATCH 3/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection   Mugunthan V N
    • [U-Boot] [PATCH 3/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection   Joe Hershberger
    • [U-Boot] [PATCH 3/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection   Lokesh Vutla
      • [U-Boot] [PATCH 3/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection   Mugunthan V N
• [U-Boot] [PATCH 1/3] drivers: net: phy: atheros: add separate config for AR8031   Mugunthan V N
  • [U-Boot] [PATCH 1/3] drivers: net: phy: atheros: add separate config for AR8031   Joe Hershberger
• [U-Boot] [PATCH] armv8:ls1012a: Update bootargs for fast-boot   Pratiyush Srivastava
  • [U-Boot] [PATCH] armv8:ls1012a: Update bootargs for fast-boot   york sun
    • [U-Boot] [PATCH] armv8:ls1012a: Update bootargs for fast-boot   Harninder Rai
• [U-Boot] build error with CONFIG_DM_PCI disabled in menuconfig   Ding, ChiX
  • [U-Boot] build error with CONFIG_DM_PCI disabled in menuconfig   Bin Meng
    • [U-Boot] build error with CONFIG_DM_PCI disabled in menuconfig   Ding, ChiX
      • [U-Boot] build error with CONFIG_DM_PCI disabled in menuconfig   Bin Meng
      • [U-Boot] build error with CONFIG_DM_PCI disabled in menuconfig   Ding, ChiX
• [U-Boot] [PATCH] ARM: tegra: reduce DRAM size mapped into MMU on ARM64   Stephen Warren
• [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Dinh Nguyen
  • [U-Boot] [RFC 1/4] drivers: dma: Add the ARM PL330 DMA driver   Dinh Nguyen
    • [U-Boot] [RFC 1/4] drivers: dma: Add the ARM PL330 DMA driver   Chin Liang See
  • [U-Boot] [RFC 2/4] dma: Kconfig: Add CONFIG_PL330_DMA entry   Dinh Nguyen
    • [U-Boot] [RFC 2/4] dma: Kconfig: Add CONFIG_PL330_DMA entry   Chin Liang See
    • [U-Boot] [RFC 2/4] dma: Kconfig: Add CONFIG_PL330_DMA entry   Marek Vasut
  • [U-Boot] [RFC 3/4] dm: add DMA_SUPPORTS_DEV_TO_MEM type to DMA_UCLASS   Dinh Nguyen
    • [U-Boot] [RFC 3/4] dm: add DMA_SUPPORTS_DEV_TO_MEM type to DMA_UCLASS   Simon Glass
    • [U-Boot] [RFC 3/4] dm: add DMA_SUPPORTS_DEV_TO_MEM type to DMA_UCLASS   Marek Vasut
  • [U-Boot] [RFC 4/4] arm: socfpga: scrub the SDRAM to properly enable ECC support   Dinh Nguyen
    • [U-Boot] [RFC 4/4] arm: socfpga: scrub the SDRAM to properly enable ECC support   Chin Liang See
    • [U-Boot] [RFC 4/4] arm: socfpga: scrub the SDRAM to properly enable ECC support   Marek Vasut
  • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Marek Vasut
    • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Dinh Nguyen
      • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Marek Vasut
      • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Dinh Nguyen
      • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Marek Vasut
  • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Dinh Nguyen
    • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Marek Vasut
      • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Dinh Nguyen
      • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Marek Vasut
      • [U-Boot] [RFC] 0/4] Add Pl330 DMA support   Marek Vasut
• [U-Boot] [PATCH] net: smsc95xx: fix DM MAC address reading   Stephen Warren
  • [U-Boot] [PATCH] net: smsc95xx: fix DM MAC address reading   Joe Hershberger
• [U-Boot] [PATCH 0/5] sf: Add support for status register protect   George McCollister
  • [U-Boot] [PATCH 2/5] sf: Add status register protect for STMICRO, SST   George McCollister
    • [U-Boot] [PATCH 2/5] sf: Add status register protect for STMICRO, SST   Bin Meng
  • [U-Boot] [PATCH 3/5] sf: Use stm_lock/unlock for Spansion and Winbond   George McCollister
    • [U-Boot] [PATCH 3/5] sf: Use stm_lock/unlock for Spansion and Winbond   Bin Meng
  • [U-Boot] [PATCH 4/5] sf: Add status register protect for Winbond   George McCollister
    • [U-Boot] [PATCH 4/5] sf: Add status register protect for Winbond   Bin Meng
  • [U-Boot] [PATCH 5/5] sf: Add sr-protect sub-command   George McCollister
    • [U-Boot] [PATCH 5/5] sf: Add sr-protect sub-command   Bin Meng
  • [U-Boot] [PATCH 0/5] sf: Add support for status register protect   George McCollister
    • [U-Boot] [PATCH 0/5] sf: Add support for status register protect   Jagan Teki
• [U-Boot] [PATCH 1/5] sf: Add status register protection mechanism   George McCollister
  • [U-Boot] [PATCH 1/5] sf: Add status register protection mechanism   Bin Meng
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
  • [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] Please pull u-boot-mmc   Jaehoon Chung
  • [U-Boot] Please pull u-boot-mmc   Tom Rini
• [U-Boot] [PATCH] power: regulator: Add limits checking while setting voltage and current   Simon Glass
  • [U-Boot] [PATCH] power: regulator: Add limits checking while setting voltage and current   Keerthy
    • [U-Boot] [PATCH] power: regulator: Add limits checking while setting voltage and current   Keerthy
• [U-Boot] [PATCH v6 1/6] power: regulator: Add ctrl_reg and volt_reg fields for pmic   Simon Glass
• [U-Boot] [PATCH v6 2/6] power: pmic: Palmas: Add the base pmic support   Simon Glass
• [U-Boot] [PATCH v6 3/6] power: regulator: palmas: Add regulator support   Simon Glass
• [U-Boot] [PATCH v6 4/6] configs: dra7xx_evm_defconfig: Enable PALMAS options   Simon Glass
• [U-Boot] [PATCH v6 5/6] configs: am57xx_evm_defconfig: Enable PALMAS options   Simon Glass
• [U-Boot] [PATCH v3 1/2] power: pmic: lp873x: Add the base pmic support   Simon Glass
• [U-Boot] [PATCH v3 2/2] power: regulator: lp873x: Add regulator support   Simon Glass
• [U-Boot] [PATCH 02/82] Add _image_binary_end section declaration   Bin Meng
  • [U-Boot] [PATCH 02/82] Add _image_binary_end section declaration   Bin Meng
• [U-Boot] [PATCH 03/82] bios_emulator: Fix cast for 64-bit compilation   Bin Meng
  • [U-Boot] [PATCH 03/82] bios_emulator: Fix cast for 64-bit compilation   Bin Meng
• [U-Boot] [PATCH 04/82] board_f: Drop the extra fdtdec_prepare_fdt()   Bin Meng
  • [U-Boot] [PATCH 04/82] board_f: Drop the extra fdtdec_prepare_fdt()   Bin Meng
• [U-Boot] [PATCH 05/82] console: Don't enable CONFIG-CONSOLE_MUX, etc. in SPL   Bin Meng
  • [U-Boot] [PATCH 05/82] console: Don't enable CONFIG-CONSOLE_MUX, etc. in SPL   Simon Glass
• [U-Boot] [PATCH 06/82] elf: Add the Elf64_Rela type   Bin Meng
  • [U-Boot] [PATCH 06/82] elf: Add the Elf64_Rela type   Bin Meng
• [U-Boot] [PATCH 08/82] rtc: Use CONFIG_X86 instead of __I386__   Bin Meng
  • [U-Boot] [PATCH 08/82] rtc: Use CONFIG_X86 instead of __I386__   Bin Meng
• [U-Boot] [PATCH 09/82] spl: spi: Add a debug message if loading fails   Bin Meng
• [U-Boot] [PATCH 17/82] tpm: Tidy up use of size_t   Bin Meng
  • [U-Boot] [PATCH 17/82] tpm: Tidy up use of size_t   Bin Meng
• [U-Boot] [PATCH 18/82] usb: pci: Fix cast for 64-bit compilation   Bin Meng
  • [U-Boot] [PATCH 18/82] usb: pci: Fix cast for 64-bit compilation   Bin Meng
• [U-Boot] [PATCH 19/82] video: Use ulong for video frame buffer address   Bin Meng
• [U-Boot] [PATCH 20/82] x86: Allow interrupts to be disabled in 64-bit mode   Bin Meng
  • [U-Boot] [PATCH 20/82] x86: Allow interrupts to be disabled in 64-bit mode   Bin Meng
• [U-Boot] [PATCH 21/82] x86: Correct address casts in cpu code   Bin Meng
  • [U-Boot] [PATCH 21/82] x86: Correct address casts in cpu code   Bin Meng
• [U-Boot] [PATCH 22/82] x86: Correct address casts in interrupt code   Bin Meng
  • [U-Boot] [PATCH 22/82] x86: Correct address casts in interrupt code   Bin Meng
• [U-Boot] [PATCH 26/82] x86: ivybridge: Declare global data where it is used   Bin Meng
• [U-Boot] [PATCH 27/82] x86: i2c: Fix cast of address to 32-bit value   Bin Meng
  • [U-Boot] [PATCH 27/82] x86: i2c: Fix cast of address to 32-bit value   Bin Meng
• [U-Boot] [PATCH 28/82] x86: Don't export interrupt handlers with x86_64   Bin Meng
  • [U-Boot] [PATCH 28/82] x86: Don't export interrupt handlers with x86_64   Bin Meng
• [U-Boot] [PATCH 29/82] x86: ivybridge: Add more debugging for failures   Bin Meng
• [U-Boot] [PATCH 30/82] x86: ivybridge: Fix types for 64-bit compilation   Bin Meng
• [U-Boot] [PATCH 31/82] x86: ivybridge: Fix PCH power setup   Bin Meng
  • [U-Boot] [PATCH 31/82] x86: ivybridge: Fix PCH power setup   Bin Meng
• [U-Boot] [PATCH 32/82] x86: ivybridge: Tidy up enable_clock_gating() for 64-bit   Bin Meng
  • [U-Boot] [PATCH 32/82] x86: ivybridge: Tidy up enable_clock_gating() for 64-bit   Bin Meng
• [U-Boot] [PATCH 33/82] x86: dts: Mark serial as needed before relocation   Bin Meng
  • [U-Boot] [PATCH 33/82] x86: dts: Mark serial as needed before relocation   Simon Glass
• [U-Boot] [PATCH 34/82] x86: fsp: Fix cast for 64-bit compilation   Bin Meng
• [U-Boot] [PATCH 35/82] x86: Drop unused init_helper functions   Bin Meng
  • [U-Boot] [PATCH 35/82] x86: Drop unused init_helper functions   Bin Meng
• [U-Boot] [PATCH 36/82] x86: lib: Fix types and casts for 64-bit compilation   Bin Meng
• [U-Boot] [PATCH 37/82] x86: mrccache: Fix error handling in mrccache_get_region()   Bin Meng
  • [U-Boot] [PATCH 37/82] x86: mrccache: Fix error handling in mrccache_get_region()   Bin Meng
• [U-Boot] [PATCH] configs: ls2080ardb: Enable DSPI flash support   Yuan Yao
• [U-Boot] [PATCH 00/82] x86: Add initial support for 64-bit U-Boot   Bin Meng
  • [U-Boot] [PATCH 00/82] x86: Add initial support for 64-bit U-Boot   Simon Glass
    • [U-Boot] [PATCH 00/82] x86: Add initial support for 64-bit U-Boot   Bin Meng
• [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.   Yuan Yao
  • [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.   york sun
    • [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.   Yao Yuan
    • [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.   york sun
      • [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.   Yao Yuan
      • [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.   york sun
      • [U-Boot] [PATCH] board/ls2080qds: add the procedure to deply QSPI image.   Yao Yuan
• [U-Boot] [PATCH] ls1021a: QSPI: update the node for QSPI support   Yuan Yao
• [U-Boot] [PATCH V4 1/8] tools: imximage: add plugin support   Peng Fan
  • [U-Boot] [PATCH V4 2/8] imx: mx6: Add plugin support   Peng Fan
  • [U-Boot] [PATCH V4 3/8] imx: mx7: Add plugin support   Peng Fan
  • [U-Boot] [PATCH V4 4/8] imx-common: introduce USE_IMXIMG_PLUGIN Kconfig   Peng Fan
  • [U-Boot] [PATCH V4 4/8] imx-common: introduce USE_IMXIMG_PLUGIN Kconfig   Peng Fan
  • [U-Boot] [PATCH V4 5/8] imx-common: compile plugin code   Peng Fan
  • [U-Boot] [PATCH V4 6/8] imx: mx6ullevk: support plugin   Peng Fan
  • [U-Boot] [PATCH V4 7/8] imx: mx6ullevk: correct boot device macro   Peng Fan
  • [U-Boot] [PATCH V4 8/8] imx: mx6ull_14x14_evk: add plugin defconfig   Peng Fan
  • [U-Boot] [PATCH V4 1/8] tools: imximage: add plugin support   Stefano Babic
    • [U-Boot] [PATCH V4 1/8] tools: imximage: add plugin support   Peng Fan
      • [U-Boot] [PATCH V4 1/8] tools: imximage: add plugin support   Stefano Babic
• [U-Boot] [PATCH V2] mmc: introduce mmc_power_init   Peng Fan
  • [U-Boot] [PATCH V2] mmc: introduce mmc_power_init   Jaehoon Chung
• [U-Boot] [PATCH v1 1/1] ARM:SUNXI: Update DRAM clock for Olimex A20 boards   Hans de Goede
  • [U-Boot] [PATCH v1 1/1] ARM:SUNXI: Update DRAM clock for Olimex A20 boards   Stefan Mavrodiev
  • [U-Boot] [PATCH v1 1/1] ARM:SUNXI: Update DRAM clock for Olimex A20 boards   Stefan Mavrodiev
    • [U-Boot] [PATCH v1 1/1] ARM:SUNXI: Update DRAM clock for Olimex A20 boards   Hans de Goede
• [U-Boot] [PicoZed] Error in NET and SD Card   Oscar Gomez Fuente
  • [U-Boot] [PicoZed] Error in NET and SD Card   Jaehoon Chung
    • [U-Boot] [PicoZed] Error in NET and SD Card   Oscar Gomez Fuente
      • [U-Boot] [PicoZed] Error in NET and SD Card   Jaehoon Chung
      • [U-Boot] [PicoZed] Error in NET and SD Card   Oscar Gomez Fuente
      • [U-Boot] [PicoZed] Error in NET and SD Card   Jaehoon Chung
      • [U-Boot] [PicoZed] Error in NET and SD Card   Oscar Gomez Fuente
• [U-Boot] [PATCH 1/2] mx6sabresd: Add Falcon mode support   Fabio Estevam
  • [U-Boot] [PATCH 1/2] mx6sabresd: Add Falcon mode support   Diego Dorta
    • [U-Boot] [PATCH 2/2] mx6sabresd: Add README file   Diego Dorta
      • [U-Boot] [PATCH 2/2] mx6sabresd: Add README file   Otavio Salvador
      • [U-Boot] [PATCH 2/2] mx6sabresd: Add README file   Fabio Estevam
    • [U-Boot] [PATCH 1/2] mx6sabresd: Add Falcon mode support   Otavio Salvador
      • [U-Boot] [PATCH 1/2] mx6sabresd: Add Falcon mode support   Fabio Estevam
      • [U-Boot] [PATCH 1/2] mx6sabresd: Add Falcon mode support   Stefano Babic
  • [U-Boot] [PATCH 1/2] mx6sabresd: Add Falcon mode support   Fabio Estevam
    • [U-Boot] [PATCH 1/2] mx6sabresd: Add Falcon mode support   Stefano Babic
      • [U-Boot] [PATCH 1/2] mx6sabresd: Add Falcon mode support   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sabresd: Add README file   Fabio Estevam
• [U-Boot] Please pull u-boot-dm   Simon Glass
  • [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH 0/3] ti: common: board_detect: basic fixes for blank eeprom   Nishanth Menon
  • [U-Boot] [PATCH 1/3] ti: common: board_detect: Replace hardcoded value with macro   Nishanth Menon
    • [U-Boot] [PATCH 1/3] ti: common: board_detect: Replace hardcoded value with macro   Lokesh Vutla
    • [U-Boot] [PATCH 1/3] ti: common: board_detect: Replace hardcoded value with macro   Tom Rini
  • [U-Boot] [PATCH 2/3] ti: common: board_detect: Setup initial default value for config as well   Nishanth Menon
    • [U-Boot] [PATCH 2/3] ti: common: board_detect: Setup initial default value for config as well   Lokesh Vutla
    • [U-Boot] [PATCH 2/3] ti: common: board_detect: Setup initial default value for config as well   Tom Rini
  • [U-Boot] [PATCH 3/3] ti: common: board_detect: Return a valid empty string for un-initialized eeprom   Nishanth Menon
    • [U-Boot] [PATCH 3/3] ti: common: board_detect: Return a valid empty string for un-initialized eeprom   Lokesh Vutla
    • [U-Boot] [PATCH 3/3] ti: common: board_detect: Return a valid empty string for un-initialized eeprom   Tom Rini
• [U-Boot] Please pull u-boot-fdt   Simon Glass
  • [U-Boot] Please pull u-boot-fdt   Tom Rini
    • [U-Boot] Please pull u-boot-fdt   Simon Glass
      • [U-Boot] Please pull u-boot-fdt   Keerthy
      • [U-Boot] Please pull u-boot-fdt   Keerthy
      • [U-Boot] Please pull u-boot-fdt   Tom Rini
      • [U-Boot] Please pull u-boot-fdt   Simon Glass
      • [U-Boot] Please pull u-boot-fdt   Simon Glass
      • [U-Boot] Please pull u-boot-fdt   Keerthy
      • [U-Boot] Please pull u-boot-fdt   Simon Glass
    • [U-Boot] Please pull u-boot-fdt   Simon Glass
      • [U-Boot] Please pull u-boot-fdt   Tom Rini
      • [U-Boot] Please pull u-boot-fdt   Simon Glass
      • [U-Boot] Please pull u-boot-fdt   Keerthy
      • [U-Boot] Please pull u-boot-fdt   Simon Glass
      • [U-Boot] Please pull u-boot-fdt   Keerthy
  • [U-Boot] Please pull u-boot-fdt   Simon Glass
    • [U-Boot] Please pull u-boot-fdt   Tom Rini
• [U-Boot] [PATCH v2 2/3] board: am335x-icev2: add ethernet phy mode detection logic   Joe Hershberger
• [U-Boot] [PATCH v2 3/3] board: am335x: Always set eth/eth1addr environment variable   Joe Hershberger
• [U-Boot] Please pull u-boot-x86   Bin Meng
  • [U-Boot] Please pull u-boot-x86   Tom Rini
  • [U-Boot] Please pull u-boot-x86   Bin Meng
    • [U-Boot] Please pull u-boot-x86   Tom Rini
      • [U-Boot] Please pull u-boot-x86   Tom Rini
    • [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node   Vignesh R
  • [U-Boot] [PATCH 2/2] spi: ti_qspi: Fix baudrate divider calculation   Vignesh R
    • [U-Boot] [PATCH 2/2] spi: ti_qspi: Fix baudrate divider calculation   Jagan Teki
      • [U-Boot] [PATCH 2/2] spi: ti_qspi: Fix baudrate divider calculation   Vignesh R
      • [U-Boot] [PATCH 2/2] spi: ti_qspi: Fix baudrate divider calculation   Jagan Teki
      • [U-Boot] [PATCH 2/2] spi: ti_qspi: Fix baudrate divider calculation   R, Vignesh
      • [U-Boot] [PATCH 2/2] spi: ti_qspi: Fix baudrate divider calculation   Jagan Teki
    • [U-Boot] [PATCH v2 2/2] spi: ti_qspi: Fix baudrate divider calculation   Vignesh R
  • [U-Boot] [PATCH 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node   Jagan Teki
• [U-Boot] [PATCH v1 0/2] pinctrl: at91: Add pinctrl driver   Wenyou Yang
  • [U-Boot] [PATCH v1 1/2] gpio: at91_gpio: Remove CPU_HAS_PIO3 macro   Wenyou Yang
  • [U-Boot] [PATCH v1 2/2] pinctrl: pinctrl-at91: Add pinctrl driver   Wenyou Yang
    • [U-Boot] [PATCH v1 2/2] pinctrl: pinctrl-at91: Add pinctrl driver   Simon Glass
• [U-Boot] inconsistent use of semi-colons when invoking macros   Robert P. J. Day
• [U-Boot] [PATCH 1/5] common/Kconfig: remove NOR_BOOT's depends on NOR   Zhiqiang Hou
  • [U-Boot] [PATCH 1/5] common/Kconfig: remove NOR_BOOT's depends on NOR   Tom Rini
• [U-Boot] [PATCH 2/5] configs/ls104xa: enable the config NOR_BOOT   Zhiqiang Hou
  • [U-Boot] [PATCH 2/5] configs/ls104xa: enable the config NOR_BOOT   Prabhakar Kushwaha
    • [U-Boot] [PATCH 2/5] configs/ls104xa: enable the config NOR_BOOT   Z.Q. Hou
      • [U-Boot] [PATCH 2/5] configs/ls104xa: enable the config NOR_BOOT   Tom Rini
• [U-Boot] [PATCH 3/5] kconfig: armv8: move armv8 sec_firmware CONFIG_* to Kconfig   Zhiqiang Hou
• [U-Boot] [PATCH 4/5] kconfig: fsl PPA: move CONFIG_* to Kconfig   Zhiqiang Hou
  • [U-Boot] [PATCH 4/5] kconfig: fsl PPA: move CONFIG_* to Kconfig   Priyanka Jain
• [U-Boot] [PATCH 5/5] fsl PPA: enable PPA for ls1043ardb and ls1046ardb   Zhiqiang Hou
• [U-Boot] [PATCH] armv8: fsl-layerscape: Add support of GPIO structure   Pratiyush Srivastava
  • [U-Boot] [PATCH] armv8: fsl-layerscape: Add support of GPIO structure   york sun
• [U-Boot] [PATCH v3 0/3] Add USB EHCI support for ls1012aqds   Rajesh Bhagat
  • [U-Boot] [PATCH v3 1/3] drivers: usb: fsl: add USB ULPI init code   Rajesh Bhagat
    • [U-Boot] [PATCH v3 1/3] drivers: usb: fsl: add USB ULPI init code   Marek Vasut
  • [U-Boot] [PATCH v3 2/3] config: ls1012aqds: Add USB EHCI support for ls1012aqds   Rajesh Bhagat
    • [U-Boot] [PATCH v3 2/3] config: ls1012aqds: Add USB EHCI support for ls1012aqds   Marek Vasut
• [U-Boot] [PATCH v3 3/3] armv8: ls1012a: Added CSU assignment for USB2   Rajesh Bhagat
• [U-Boot] [PATCH v4 1/2] common/Kconfig: Add DISPLAY_CPUINFO   Tom Rini
  • [U-Boot] [PATCH v4 2/2] commmon: Add DISPLAY_BOARDINFO   Tom Rini
    • [U-Boot] [PATCH v4 2/2] commmon: Add DISPLAY_BOARDINFO   Masahiro Yamada
      • [U-Boot] [PATCH v4 2/2] commmon: Add DISPLAY_BOARDINFO   Tom Rini
    • [U-Boot] [PATCH v4 2/2] common: Add DISPLAY_BOARDINFO   Tom Rini
  • [U-Boot] [PATCH v4 1/2] common/Kconfig: Add DISPLAY_CPUINFO   Tom Rini
• [U-Boot] [PATCH] ARM: uniphier: fix addresses of Cortex-A72 gear setting macros   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: uniphier: fix addresses of Cortex-A72 gear setting macros   Masahiro Yamada
• [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   Pratiyush Srivastava
  • [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   york sun
  • [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   Prabhakar Kushwaha
    • [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   york sun
      • [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   Prabhakar Kushwaha
      • [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   york sun
      • [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   Mingkai Hu
      • [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   Calvin Johnson
      • [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   york sun
      • [U-Boot] [PATCH] armv8/ls1043a: Add the OCRAM initialization   Calvin Johnson
• [U-Boot] PPC: How to get the crosstool for freescale QorIQ T2080   Yan Phenix
• [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G and MT25QU02G   Chin Liang See
  • [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G and MT25QU02G   dumitru.bacrau at intel.com
    • [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G and MT25QU02G   Jagan Teki
      • [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G and MT25QU02G   Bacrau, Dumitru
      • [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G and MT25QU02G   Jagan Teki
      • [U-Boot] [PATCH] spi: Add support for MX66U51235F, MX66L1G45G and MT25QU02G   Bacrau, Dumitru
• [U-Boot] [PATCH] pwm: imx: increase support up to PWM8   Christoph Fritz
  • [U-Boot] [PATCH] pwm: imx: increase support up to PWM8   Stefano Babic
    • [U-Boot] [PATCH] pwm: imx: increase support up to PWM8   Stefano Babic
• [U-Boot] [PATCH 1/3] video: Kconfig: Add VIDEO_IPV3 entry   Jagan Teki
  • [U-Boot] [PATCH 2/3] imx6: icorem6: Add framebuffer support   Jagan Teki
  • [U-Boot] [PATCH 3/3] imx6: icorem6: Add custom splashscreen support   Jagan Teki
• [U-Boot] U-Boot Relocation Address and GPIO Bank Access   skrawn
• [U-Boot] CPU up timeout. CPU up mask is 1 should be 3   Wesolowski, Carol
• [U-Boot] [PATCH v3 0/7] toradex: config block handling   Marcel Ziswiler
  • [U-Boot] [PATCH v3 6/7] apalis/colibri_t30: move environment location   Marcel Ziswiler
  • [U-Boot] [PATCH v3 7/7] colibri_vf: usb gadget: toradex pid is now set generically   Marcel Ziswiler
    • [U-Boot] [PATCH v3 7/7] colibri_vf: usb gadget: toradex pid is now set generically   Stefan Agner
  • [U-Boot] [PATCH v3 0/7] toradex: config block handling   Max Krummenacher
• [U-Boot] [PATCH v3 1/7] Revert "generic-board: allow showing custom board info"   Marcel Ziswiler
  • [U-Boot] [PATCH v3 1/7] Revert "generic-board: allow showing custom board info"   Tom Rini
• [U-Boot] [PATCH v3 2/7] generic-board: make show_board_info a weak function   Marcel Ziswiler
  • [U-Boot] [PATCH v3 2/7] generic-board: make show_board_info a weak function   Tom Rini
• [U-Boot] [PATCH v3 3/7] apalis/colibri_t20/t30: deactivate displaying board info   Marcel Ziswiler
• [U-Boot] [PATCH v3 4/7] toradex: config block handling   Marcel Ziswiler
• [U-Boot] [PATCH v3 5/7] apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling   Marcel Ziswiler
• [U-Boot] sh4-linux-ld: cannot find cpu/sh4/start.o   安部
• [U-Boot] [PATCH] mmc: sdhci: fix the "misaligned operation at range" for cache   Jaehoon Chung
  • [U-Boot] [PATCH] mmc: sdhci: fix the "misaligned operation at range" for cache   Jaehoon Chung
• [U-Boot] [PATCH v2 0/2] pinctrl: at91: Add pinctrl driver   Wenyou Yang
  • [U-Boot] [PATCH v2 1/2] gpio: at91_gpio: Remove CPU_HAS_PIO3 macro   Wenyou Yang
  • [U-Boot] [PATCH v2 2/2] pinctrl: pinctrl-at91: Add pinctrl driver   Wenyou Yang
• [U-Boot] [PATCH V1] Add support of ls1021a-iot   feng.li_2 at nxp.com
  • [U-Boot] [PATCH V1] Add support of ls1021a-iot   Alison Wang
    • [U-Boot] [PATCH V1] Add support of ls1021a-iot   Feng Li
• [U-Boot] [PATCH v2 0/6] imx6: icorem6: Add framebuffer support   Jagan Teki
  • [U-Boot] [PATCH v2 1/6] video: Kconfig: Add VIDEO_IPV3 entry   Jagan Teki
  • [U-Boot] [PATCH v2 2/6] Move CONFIG_VIDEO_IPUV3 to defconfig   Jagan Teki
    • [U-Boot] [PATCH v2 2/6] Move CONFIG_VIDEO_IPUV3 to defconfig   Soeren Moch
  • [U-Boot] [PATCH v2 3/6] imx6: icorem6: Add framebuffer support   Jagan Teki
  • [U-Boot] [PATCH v2 4/6] imx6: icorem6: Add custom splashscreen support   Jagan Teki
  • [U-Boot] [PATCH v2 5/6] Define/Move CONFIG_CMD_BMP to defconfig   Jagan Teki
    • [U-Boot] [PATCH v2 5/6] Define/Move CONFIG_CMD_BMP to defconfig   Tom Rini
  • [U-Boot] [PATCH v2 6/6] defconfig: icorem6: Enable CONFIG_CMD_BMP   Jagan Teki
  • [U-Boot] [PATCH v2 0/6] imx6: icorem6: Add framebuffer support   Tom Rini
    • [U-Boot] [PATCH v2 0/6] imx6: icorem6: Add framebuffer support   Jagan Teki
    • [U-Boot] [PATCH v2 0/6] imx6: icorem6: Add framebuffer support   Tom Rini
• [U-Boot] MMC driver questions   Aaron Williams
  • [U-Boot] MMC driver questions   Jaehoon Chung
• [U-Boot] [PATCH v3 00/12] Add support for Stratix 10 SoC   Chin Liang See
  • [U-Boot] [PATCH v3 00/12] Add support for Stratix 10 SoC   Chin Liang See
    • [U-Boot] [PATCH v3 01/12] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address   Chin Liang See
      • [U-Boot] [PATCH v3 01/12] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address   Marek Vasut
      • [U-Boot] [PATCH v3 01/12] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address   See, Chin Liang
      • [U-Boot] [PATCH v3 01/12] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address   Marek Vasut
      • [U-Boot] [PATCH v3 01/12] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address   Chin Liang See
    • [U-Boot] [PATCH v3 02/12] arm: socfpga: rstmgr: Add Reset Manager for Stratix 10   Chin Liang See
    • [U-Boot] [PATCH v3 03/12] arm: socfpga: rstmgr: Separate the Reset Manager for Stratix 10   Chin Liang See
    • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   See, Chin Liang
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 04/12] arm: socfpga: clkmgr: Separate the Clock Manager for Stratix 10   Marek Vasut
    • [U-Boot] [PATCH v3 05/12] arm: socfpga: fpgamgr: Disable FPGA Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 05/12] arm: socfpga: fpgamgr: Disable FPGA Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 05/12] arm: socfpga: fpgamgr: Disable FPGA Manager for Stratix 10   See, Chin Liang
      • [U-Boot] [PATCH v3 05/12] arm: socfpga: fpgamgr: Disable FPGA Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 05/12] arm: socfpga: fpgamgr: Disable FPGA Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 05/12] arm: socfpga: fpgamgr: Disable FPGA Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 05/12] arm: socfpga: fpgamgr: Disable FPGA Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 05/12] arm: socfpga: fpgamgr: Disable FPGA Manager for Stratix 10   Marek Vasut
    • [U-Boot] [PATCH v3 06/12] arm: socfpga: misc: Separate the misc.c for Stratix 10   Chin Liang See
    • [U-Boot] [PATCH v3 07/12] arm: socfpga: sysmgr: Disable System Manager for Stratix 10   Chin Liang See
      • [U-Boot] [PATCH v3 07/12] arm: socfpga: sysmgr: Disable System Manager for Stratix 10   Marek Vasut
      • [U-Boot] [PATCH v3 07/12] arm: socfpga: sysmgr: Disable System Manager for Stratix 10   Chin Liang See
    • [U-Boot] [PATCH v3 08/12] arm: socfpga: mmu: Add memory map layout for Stratix 10 SoC   Chin Liang See
    • [U-Boot] [PATCH v3 09/12] arm: socfpga: stratix10: Add board directory for Stratix 10 socdk   Chin Liang See
      • [U-Boot] [PATCH v3 09/12] arm: socfpga: stratix10: Add board directory for Stratix 10 socdk   Marek Vasut
      • [U-Boot] [PATCH v3 09/12] arm: socfpga: stratix10: Add board directory for Stratix 10 socdk   Chin Liang See
      • [U-Boot] [PATCH v3 09/12] arm: socfpga: stratix10: Add board directory for Stratix 10 socdk   Marek Vasut
    • [U-Boot] [PATCH v3 10/12] arm: dts: socfpga: Add dts for Stratix 10 socdk   Chin Liang See
    • [U-Boot] [PATCH v3 11/12] arm: socfpga: Add SPL support for Stratix 10 SoC   Chin Liang See
      • [U-Boot] [PATCH v3 11/12] arm: socfpga: Add SPL support for Stratix 10 SoC   Marek Vasut
      • [U-Boot] [PATCH v3 11/12] arm: socfpga: Add SPL support for Stratix 10 SoC   Chin Liang See
      • [U-Boot] [PATCH v3 11/12] arm: socfpga: Add SPL support for Stratix 10 SoC   Marek Vasut
    • [U-Boot] [PATCH v3 12/12] arm: socfpga: Add support for Stratix 10 SoC dev kit   Chin Liang See
      • [U-Boot] [PATCH v3 12/12] arm: socfpga: Add support for Stratix 10 SoC dev kit   Marek Vasut
• [U-Boot] [PATCH] sunxi: Rename CONFIG_SUNXI to CONFIG_ARCH_SUNXI   Jagan Teki
  • [U-Boot] [PATCH] sunxi: Rename CONFIG_SUNXI to CONFIG_ARCH_SUNXI   Hans de Goede
• [U-Boot] [PATCH] ARM: dts: am437x-idk: Fix QSPI compatible string   Vignesh R
  • [U-Boot] [PATCH] ARM: dts: am437x-idk: Fix QSPI compatible string   Jagan Teki
  • [U-Boot] [PATCH] ARM: dts: am437x-idk: Fix QSPI compatible string   Tom Rini
    • [U-Boot] [PATCH] ARM: dts: am437x-idk: Fix QSPI compatible string   Jagan Teki
• [U-Boot] [PATCH] power: twl6030: fix code refactoring   Nicolae Rosia
  • [U-Boot] [PATCH] power: twl6030: fix code refactoring   Tom Rini
  • [U-Boot] [PATCH] power: twl6030: fix code refactoring   Paul Kocialkowski
    • [U-Boot] [PATCH] power: twl6030: fix code refactoring   Nicolae Rosia
      • [U-Boot] [PATCH] power: twl6030: fix code refactoring   Tom Rini
      • [U-Boot] [PATCH] power: twl6030: fix code refactoring   Nicolae Rosia
      • [U-Boot] [PATCH] power: twl6030: fix code refactoring   Tom Rini
      • [U-Boot] [PATCH] power: twl6030: fix code refactoring   Paul Kocialkowski
  • [U-Boot] power: twl6030: fix code refactoring   Tom Rini
• [U-Boot] [PATCH] pmic: lp873x: Accommodate fdt_subnode_offset signature change   Keerthy
  • [U-Boot] [PATCH] pmic: lp873x: Accommodate fdt_subnode_offset signature change   Simon Glass
    • [U-Boot] [PATCH] pmic: lp873x: Accommodate fdt_subnode_offset signature change   Keerthy
• [U-Boot] [PATCH] pmic: palmas: Accommodate fdt_subnode_offset signature change   Keerthy
  • [U-Boot] [PATCH] pmic: palmas: Accommodate fdt_subnode_offset signature change   Simon Glass
    • [U-Boot] [PATCH] pmic: palmas: Accommodate fdt_subnode_offset signature change   Keerthy
• [U-Boot] Passing numeric values via fdt   Gary Thomas
  • [U-Boot] Passing numeric values via fdt   Jagan Teki
    • [U-Boot] Passing numeric values via fdt   Gary Thomas
• [U-Boot] [PATCH v3 00/29] Kconfig: Move console options to Kconfig   Tom Rini
  • [U-Boot] [PATCH v3 00/29] Kconfig: Move console options to Kconfig   Simon Glass
    • [U-Boot] [PATCH v3 00/29] Kconfig: Move console options to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 0/3] Add Atheros phy delay support and CPSW RGMII id support   Mugunthan V N
  • [U-Boot] [PATCH v2 1/3] drivers: net: phy: atheros: add separate config for AR8031   Mugunthan V N
    • [U-Boot] drivers: net: phy: atheros: add separate config for AR8031   Joe Hershberger
  • [U-Boot] [PATCH v2 2/3] include: configs: am335x: add Atheros phy support   Mugunthan V N
    • [U-Boot] include: configs: am335x: add Atheros phy support   Joe Hershberger
  • [U-Boot] [PATCH v2 3/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection   Mugunthan V N
    • [U-Boot] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection   Joe Hershberger
• [U-Boot] [U-Boot,v6,05/10] cpu: Add DMTF id and family fields   Alexander Graf
• [U-Boot] [U-Boot, v6, 04/10] smbios: Allow compilation on 64bit systems   Alexander Graf
• [U-Boot] [U-Boot, 4/5] arm: Provide common PSCI based reset handler   Alexander Graf
• [U-Boot] [U-Boot, v6, 09/10] efi_loader: Fix efi_install_configuration_table   Alexander Graf
• [U-Boot] [U-Boot,v2,3/5] efi_loader: gop: Expose fb when 32bpp   Alexander Graf
• [U-Boot] [U-Boot,v6,10/10] smbios: Provide serial number   Alexander Graf
• [U-Boot] [U-Boot, v6, 01/10] x86: Move table csum into separate file   Alexander Graf
• [U-Boot] efi_loader: Fix crash on 32-bit systems   Alexander Graf
• [U-Boot] [U-Boot, v6, 08/10] smbios: Expose in efi_loader as table   Alexander Graf
• [U-Boot] [U-Boot, v6, 03/10] efi_loader: Expose efi_install_configuration_table   Alexander Graf
• [U-Boot] [U-Boot,2/5] arm: Disable HVC PSCI calls by default   Alexander Graf
• [U-Boot] efi_loader: Allow bouncing for network   Alexander Graf
• [U-Boot] [U-Boot, 1/5] efi_loader: Allow boards to implement get_time and reset_system   Alexander Graf
• [U-Boot] [U-Boot, v6, 02/10] x86: Move smbios generation into arch independent directory   Alexander Graf
• [U-Boot] [U-Boot, v6, 07/10] smbios: Generate type 4 on non-x86 systems   Alexander Graf
  • [U-Boot] [U-Boot, v6, 07/10] smbios: Generate type 4 on non-x86 systems   Bin Meng
    • [U-Boot] [U-Boot, v6, 07/10] smbios: Generate type 4 on non-x86 systems   Alexander Graf
      • [U-Boot] [U-Boot, v6, 07/10] smbios: Generate type 4 on non-x86 systems   Bin Meng
      • [U-Boot] [U-Boot, v6, 07/10] smbios: Generate type 4 on non-x86 systems   Alexander Graf
• [U-Boot] [U-Boot,5/5] efi_loader: Add generic PSCI RTS   Alexander Graf
• [U-Boot] [U-Boot,v6,06/10] cpu: Add get_vendor callback   Alexander Graf
• [U-Boot] [U-Boot,3/5] arm: Add PSCI shutdown function   Alexander Graf
• [U-Boot] [U-Boot, v2, 6/8] x86: efi: Add EFI loader support for x86   Alexander Graf
• [U-Boot] [U-Boot,v2,2/8] efi: Use asmlinkage for EFIAPI   Alexander Graf
• [U-Boot] [U-Boot,v2,3/8] efi: Fix missing EFIAPI specifiers   Alexander Graf
• [U-Boot] [PATCH v2] pmic: palmas: Accommodate fdt_for_each_subnode signature change   Keerthy
  • [U-Boot] [PATCH v2] pmic: palmas: Accommodate fdt_for_each_subnode signature change   Simon Glass
• [U-Boot] [PATCH] mmc: refactor two core functions   Masahiro Yamada
  • [U-Boot] [PATCH] mmc: refactor two core functions   Jaehoon Chung
• [U-Boot] [PATCH 1/3] ARM: uniphier: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines   Masahiro Yamada
  • [U-Boot] [PATCH 2/3] ARM: zynq(mp): remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines   Masahiro Yamada
    • [U-Boot] [PATCH 2/3] ARM: zynq(mp): remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines   Michal Simek
      • [U-Boot] [PATCH 2/3] ARM: zynq(mp): remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines   Moritz Fischer
  • [U-Boot] [PATCH 3/3] ARM: sunxi: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] ARM: sunxi: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines   Jagan Teki
    • [U-Boot] [PATCH 3/3] ARM: sunxi: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines   Hans de Goede
  • [U-Boot] [PATCH 1/3] ARM: uniphier: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines   Simon Glass
  • [U-Boot] [PATCH 1/3] ARM: uniphier: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT defines   Masahiro Yamada
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
  • [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID   Joe Hershberger
• [U-Boot] board: am335x-icev2: add ethernet phy mode detection logic   Joe Hershberger
• [U-Boot] board: am335x: Always set eth/eth1addr environment variable   Joe Hershberger
• [U-Boot] net: Add support for mv88e609x switches   Joe Hershberger
• [U-Boot] net: mv88e61xx: Add support for fixed links   Joe Hershberger
• [U-Boot] net: mvneta: fix typo in comment   Joe Hershberger
• [U-Boot] net: write enetaddr down to hardware on env_callback   Joe Hershberger
• [U-Boot] rtl8169: fix cache misalignment message on transmit.   Joe Hershberger
• [U-Boot] net: Fix cache misalignment message after network load operations   Joe Hershberger
• [U-Boot] test: add NFS download test   Joe Hershberger
• [U-Boot] net: smsc95xx: fix DM MAC address reading   Joe Hershberger
• [U-Boot] Booting from MMC, other partition   Robert Ianovich
  • [U-Boot] Booting from MMC, other partition   Jaehoon Chung
• [U-Boot] NFS and timeouts?   Tom Rini
  • [U-Boot] NFS and timeouts?   Simon Glass
    • [U-Boot] NFS and timeouts?   Joe Hershberger
      • [U-Boot] NFS and timeouts?   Guillaume Gardet
      • [U-Boot] NFS and timeouts?   Tom Rini
      • [U-Boot] NFS and timeouts?   Guillaume Gardet
    • [U-Boot] NFS and timeouts?   Tom Rini
• [U-Boot] Please pull u-boot-fdt (take 2)   Simon Glass
  • [U-Boot] Please pull u-boot-fdt (take 2)   Tom Rini
• [U-Boot] [PATCH] usb: ehci-vf: use ehci_deregister() for .remove callback   Masahiro Yamada
  • [U-Boot] [PATCH] usb: ehci-vf: use ehci_deregister() for .remove callback   Marek Vasut
• [U-Boot] [PATCH] usb: xhci-mvebu: use xhci_deregister() for .remove callback   Masahiro Yamada
  • [U-Boot] [PATCH] usb: xhci-mvebu: use xhci_deregister() for .remove callback   Marek Vasut
• [U-Boot] [PATCH] spi: kirkwood_spi: implement mvebu_spi_set_mode()   Chris Packham
  • [U-Boot] [PATCH] spi: kirkwood_spi: implement mvebu_spi_set_mode()   Stefan Roese
  • [U-Boot] [PATCH] spi: kirkwood_spi: implement mvebu_spi_set_mode()   Jagan Teki
    • [U-Boot] [PATCH v2] spi: kirkwood_spi: implement mvebu_spi_set_mode()   Chris Packham
      • [U-Boot] [PATCH v2] spi: kirkwood_spi: implement mvebu_spi_set_mode()   Jagan Teki
      • [U-Boot] [PATCH v2] spi: kirkwood_spi: implement mvebu_spi_set_mode()   Chris Packham
      • [U-Boot] [PATCH v2] spi: kirkwood_spi: implement mvebu_spi_set_mode()   Stefan Roese
      • [U-Boot] [PATCH v2] spi: kirkwood_spi: implement mvebu_spi_set_mode()   Jagan Teki
• [U-Boot] [PATCH 0/3] ARM: AMx3xx: Minor cleanup in early init code   Lokesh Vutla
  • [U-Boot] [PATCH 1/3] ARM: AMx3xx: Allow arch specific code to use early DM   Lokesh Vutla
    • [U-Boot] [PATCH 1/3] ARM: AMx3xx: Allow arch specific code to use early DM   Tom Rini
  • [U-Boot] [PATCH 2/3] ARM: AMx3xx: Centralize early clock initialization   Lokesh Vutla
    • [U-Boot] [PATCH 2/3] ARM: AMx3xx: Centralize early clock initialization   Tom Rini
  • [U-Boot] [PATCH 3/3] board: ti: amx3xx: Remove multiple EEPROM reads   Lokesh Vutla
    • [U-Boot] [PATCH 3/3] board: ti: amx3xx: Remove multiple EEPROM reads   Tom Rini
• [U-Boot] [PATCH] powerpc: mpc512x: Add support for get_svr() for mpc512x devices   Sriram Dash
  • [U-Boot] [PATCH] powerpc: mpc512x: Add support for get_svr() for mpc512x devices   Bin Meng
    • [U-Boot] [PATCH] powerpc: mpc512x: Add support for get_svr() for mpc512x devices   Sriram Dash
• [U-Boot] [PATCH v2] powerpc: mpc512x: Add support for get_svr() for mpc512x devices   Sriram Dash
  • [U-Boot] [PATCH v2] powerpc: mpc512x: Add support for get_svr() for mpc512x devices   york sun
• [U-Boot] [IGNORE PATCH 0/9] tbot demo patches, please ignore   Heiko Schocher
  • [U-Boot] [IGNORE PATCH 1/9] README: simple change 1   Heiko Schocher
  • [U-Boot] [IGNORE PATCH 2/9] README: simple change 2   Heiko Schocher
  • [U-Boot] [IGNORE PATCH 3/9] README: simple change 3   Heiko Schocher
  • [U-Boot] [IGNORE PATCH 4/9] README: simple change 4   Heiko Schocher
  • [U-Boot] [IGNORE PATCH 5/9] README: simple change 5   Heiko Schocher
  • [U-Boot] [IGNORE PATCH 6/9] cmd, help: break the help command   Heiko Schocher
  • [U-Boot] [IGNORE PATCH 7/9] README: simple change 6   Heiko Schocher
  • [U-Boot] [IGNORE PATCH 8/9] README: simple change 7   Heiko Schocher
  • [U-Boot] [IGNORE PATCH 9/9] README: simple change 8   Heiko Schocher
• [U-Boot] Issue with USB mass storage (thumb drives)   Michael Kasprowicz
• [U-Boot] [PATCH] sunxi: Add defconfig and dts file for Orange Pi One SBC   Jp Theroux
• [U-Boot] [PicoZed] Error uenvboot script   Oscar Gomez Fuente
• [U-Boot] [PATCH] efi_loader: Rename EFI_RUNTIME_{TEXT, DATA} to __efi_runtime{, _data}   Alexander Graf
  • [U-Boot] [PATCH] efi_loader: Rename EFI_RUNTIME_{TEXT, DATA} to __efi_runtime{, _data}   Simon Glass
  • [U-Boot] efi_loader: Rename EFI_RUNTIME_{TEXT, DATA} to __efi_runtime{, _data}   Alexander Graf
• [U-Boot] [PATCH v2 1/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection   Roger Quadros
  • [U-Boot] [PATCH v2 1/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection   Joe Hershberger
• [U-Boot] [RFC PATCH 0/2] Fix armv8 cache flushing   York Sun
  • [U-Boot] [RFC PATCH 1/2] armv8: Fix dcache disable function   York Sun
• [U-Boot] [RFC PATCH 2/2] armv8: Fix flush_dcache_all function   York Sun
  • [U-Boot] [RFC PATCH 2/2] armv8: Fix flush_dcache_all function   york sun
• [U-Boot] [Resend RFC PATCH 0/2] Fix armv8 cache flushing   York Sun
• [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   York Sun
  • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
  • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
  • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
    • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Mark Rutland
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   york sun
    • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Mark Rutland
      • [U-Boot] [Resend RFC PATCH 1/2] armv8: Fix dcache disable function   Stephen Warren
• [U-Boot] [Resend RFC PATCH 2/2] armv8: Fix flush_dcache_all function   York Sun
  • [U-Boot] [Resend RFC PATCH 2/2] armv8: Fix flush_dcache_all function   Stephen Warren
    • [U-Boot] [Resend RFC PATCH 2/2] armv8: Fix flush_dcache_all function   york sun
• [U-Boot] [PATCH] tpm: tpm_tis_lpc: Add support for AT97SC3204   George McCollister
  • [U-Boot] [PATCH] tpm: tpm_tis_lpc: Add support for AT97SC3204   Simon Glass
• [U-Boot] [PATCH] test/py/tests/test_sleep.py: Add check for CONFIG_CMD_MISC   Tom Rini
  • [U-Boot] [PATCH] test/py/tests/test_sleep.py: Add check for CONFIG_CMD_MISC   Tom Rini
• [U-Boot] qemu-x86 issues   Tom Rini
  • [U-Boot] qemu-x86 issues   Bin Meng
    • [U-Boot] qemu-x86 issues   Tom Rini
      • [U-Boot] qemu-x86 issues   Tom Rini
      • [U-Boot] qemu-x86 issues   Bin Meng
      • [U-Boot] qemu-x86 issues   Tom Rini
• [U-Boot] [PATCH v2] watchdog: Fix Watchdog Reset while in U-Boot Prompt   Tom Rini
• [U-Boot] [PATCH v5 0/7] LS2080ARDB: Enable EFI boot support   Alexander Graf
  • [U-Boot] [PATCH v5 1/7] ls2080: Exit dpaa only right before exiting U-Boot   Alexander Graf
    • [U-Boot] [PATCH v5 1/7] ls2080: Exit dpaa only right before exiting U-Boot   york sun
    • [U-Boot] [PATCH v5 1/7] ls2080: Exit dpaa only right before exiting U-Boot   Prabhakar Kushwaha
      • [U-Boot] [PATCH v5 1/7] ls2080: Exit dpaa only right before exiting U-Boot   Alexander Graf
      • [U-Boot] [PATCH v5 1/7] ls2080: Exit dpaa only right before exiting U-Boot   Prabhakar Kushwaha
      • [U-Boot] [PATCH v5 1/7] ls2080: Exit dpaa only right before exiting U-Boot   Alexander Graf
      • [U-Boot] [PATCH v5 1/7] ls2080: Exit dpaa only right before exiting U-Boot   york sun
  • [U-Boot] [PATCH v5 2/7] efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3   Alexander Graf
    • [U-Boot] [PATCH v5 2/7] efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3   york sun
  • [U-Boot] [PATCH v5 3/7] ls2080ardb: Reserve DP-DDR RAM   Alexander Graf
    • [U-Boot] [PATCH v5 3/7] ls2080ardb: Reserve DP-DDR RAM   york sun
  • [U-Boot] [PATCH v5 4/7] ls2080ardb: Convert to distro boot   Alexander Graf
    • [U-Boot] [PATCH v5 4/7] ls2080ardb: Convert to distro boot   york sun
      • [U-Boot] [PATCH v5 4/7] ls2080ardb: Convert to distro boot   Alexander Graf
  • [U-Boot] [PATCH v5 5/7] armv8: ls2080a: Declare spin tables as reserved for efi loader   Alexander Graf
    • [U-Boot] [PATCH v5 5/7] armv8: ls2080a: Declare spin tables as reserved for efi loader   york sun
      • [U-Boot] [PATCH v5 5/7] armv8: ls2080a: Declare spin tables as reserved for efi loader   Alexander Graf
      • [U-Boot] [PATCH v5 5/7] armv8: ls2080a: Declare spin tables as reserved for efi loader   york sun
  • [U-Boot] [PATCH v5 6/7] armv8: fsl-layerscape: Add support for efi_loader RTS reset   Alexander Graf
    • [U-Boot] [PATCH v5 6/7] armv8: fsl-layerscape: Add support for efi_loader RTS reset   york sun
  • [U-Boot] [PATCH v5 7/7] efi_loader: Declare secure memory as reserved   Alexander Graf
    • [U-Boot] [PATCH v5 7/7] efi_loader: Declare secure memory as reserved   york sun
      • [U-Boot] [PATCH v5 7/7] efi_loader: Declare secure memory as reserved   Alexander Graf
      • [U-Boot] [PATCH v5 7/7] efi_loader: Declare secure memory as reserved   york sun
      • [U-Boot] [PATCH v5 7/7] efi_loader: Declare secure memory as reserved   Alexander Graf
• [U-Boot] [PATCH] OMAP3: omap3_logic: Remove LCD preboot info   Adam Ford
• [U-Boot] [PATCH V2] OMAP3: omap3_logic: Remove LCD preboot info   Adam Ford
  • [U-Boot] [PATCH V2] OMAP3: omap3_logic: Remove LCD preboot info   Tom Rini
• [U-Boot] [PATCH] usb: host: Move CONFIG_USB_MAX_CONTROLLER_COUNT to non-dm   Jagan Teki
  • [U-Boot] [PATCH] usb: host: Move CONFIG_USB_MAX_CONTROLLER_COUNT to non-dm   Tom Rini
    • [U-Boot] [PATCH] usb: host: Move CONFIG_USB_MAX_CONTROLLER_COUNT to non-dm   Marek Vasut
    • [U-Boot] [PATCH] usb: host: Move CONFIG_USB_MAX_CONTROLLER_COUNT to non-dm   Masahiro Yamada
      • [U-Boot] [PATCH] usb: host: Move CONFIG_USB_MAX_CONTROLLER_COUNT to non-dm   Tom Rini
• [U-Boot] [PATCH 4/4] RK3288 needs fdt and initrd below 256M now.   Simon Glass
• [U-Boot] [PATCH] clk: rk3399: fix rockchip_get_cru   Simon Glass
• [U-Boot] [PATCH] OMAP3: omap3_logic: Add scripts to boot over network.   Adam Ford
  • [U-Boot] [PATCH] OMAP3: omap3_logic: Add scripts to boot over network.   Tom Rini
• [U-Boot] CONFIG_USE_ARCH_MEMSET/MEMCPY and SPL not working   Max Krummenacher
• [U-Boot] Please pull u-boot-mpc85xx master   york sun
  • [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] [PATCH v5 1/2] Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand.   york sun
• [U-Boot] [PATCH v5 2/2] pbl: use "wait" command instead of "flush" command   york sun
• [U-Boot] [PATCH] arch: powerpc: Remove unused dts frequency fixup for lbc_clk   york sun
• [U-Boot] [PATCH 1/3] spl: mmc: fix switch statement   Max Krummenacher
  • [U-Boot] [PATCH 2/3] imx: make ipu's di configurable   Max Krummenacher
  • [U-Boot] [PATCH 3/3] mx6: synchronize SPL to u-boot offset   Max Krummenacher
    • [U-Boot] [PATCH 3/3] mx6: synchronize SPL to u-boot offset   Marek Vasut
      • [U-Boot] [PATCH 3/3] mx6: synchronize SPL to u-boot offset   Max Krummenacher
      • [U-Boot] [PATCH 3/3] mx6: synchronize SPL to u-boot offset   Marek Vasut
      • [U-Boot] [PATCH 3/3] mx6: synchronize SPL to u-boot offset   Max Krummenacher
      • [U-Boot] [PATCH 3/3] mx6: synchronize SPL to u-boot offset   Marek Vasut
      • [U-Boot] [PATCH 3/3] mx6: synchronize SPL to u-boot offset   Max Krummenacher
  • [U-Boot] [PATCH 1/3] spl: mmc: fix switch statement   Marek Vasut
    • [U-Boot] [PATCH 1/3] spl: mmc: fix switch statement   Max Krummenacher
      • [U-Boot] [PATCH 1/3] spl: mmc: fix switch statement   Marek Vasut
  • [U-Boot] [PATCH 1/3] spl: mmc: fix switch statement   Tom Rini
• [U-Boot] [PATCH] cmd/tpm_test: Fix misleading code indentation   Stefan Brüns
  • [U-Boot] [PATCH] cmd/tpm_test: Fix misleading code indentation   Simon Glass
    • [U-Boot] [PATCH] cmd/tpm_test: Fix misleading code indentation   Simon Glass
• [U-Boot] [PATCH 1/2] tools: moveconfig: support wildcards in --defconfigs file   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] tools: moveconfig: support wildcards in --defconfigs file   Tom Rini
    • [U-Boot] [PATCH 1/2] tools: moveconfig: support wildcards in --defconfigs file   Masahiro Yamada
      • [U-Boot] [PATCH 1/2] tools: moveconfig: support wildcards in --defconfigs file   Tom Rini
      • [U-Boot] [PATCH 1/2] tools: moveconfig: support wildcards in --defconfigs file   Joe Hershberger
• [U-Boot] [PATCH 2/2] tools: moveconfig: process defconfig files in alphabetical order   Masahiro Yamada
  • [U-Boot] [PATCH 2/2] tools: moveconfig: process defconfig files in alphabetical order   Tom Rini
    • [U-Boot] [PATCH 2/2] tools: moveconfig: process defconfig files in alphabetical order   Masahiro Yamada
      • [U-Boot] [PATCH 2/2] tools: moveconfig: process defconfig files in alphabetical order   Tom Rini
      • [U-Boot] [PATCH 2/2] tools: moveconfig: process defconfig files in alphabetical order   Masahiro Yamada
• [U-Boot] [PATCH] test/py: Fix exception, do not parametrize with empty set   Stefan Brüns
  • [U-Boot] [PATCH] test/py: Fix exception, do not parametrize with empty set   Stephen Warren
    • [U-Boot] [PATCH] test/py: Fix exception, do not parametrize with empty set   Brüns, Stefan
      • [U-Boot] [PATCH] test/py: Fix exception, do not parametrize with empty set   Stephen Warren
      • [U-Boot] [PATCH] test/py: Fix exception, do not parametrize with empty set   Stephen Warren
  • [U-Boot] [PATCH] test/py: Fix exception, do not parametrize with empty set   Stephen Warren
• [U-Boot] [U-Boot,v1] i2c: at91_i2c: Fix the wrong include file   Andreas Bießmann
• [U-Boot] AT91: Correct misspelling of "redundent" in partition names   Andreas Bießmann
  • [U-Boot] AT91: Correct misspelling of "redundent" in partition names   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 1/2] serial: Kconfig: Add ATMEL_USART option   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 2/2] serial: atmel_usart: Support enable an early debug UART   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 1/4] board: sama5d2_xplained: Move config options to defconfigs   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 2/4] board: sama5d2_xplained: Clean up code   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 3/4] board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC   Andreas Bießmann
  • [U-Boot] [U-Boot, v2, 3/4] board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC   Andreas Bießmann
    • [U-Boot] [U-Boot, v2, 3/4] board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] board: sama5d2_xplained: Enable an early debug UART   Andreas Bießmann
• [U-Boot] Finding u-boot code in SD card using a hex viewer   Mani Amoozadeh
• [U-Boot] [RFC PATCH 0/1] 4-byte SPI flash addressing   Chris Packham
  • [U-Boot] [RFC PATCH 1/1] sf: support chips using 4-byte addressing   Chris Packham
    • [U-Boot] [RFC PATCH v2] sf: support chips using 4-byte addressing   Chris Packham
      • [U-Boot] [RFC PATCH v2] sf: support chips using 4-byte addressing   Siva Durga Prasad Paladugu
      • [U-Boot] [RFC PATCH v2] sf: support chips using 4-byte addressing   Vignesh R
• [U-Boot] [PATCH v3] i2c: at91_i2c: Fix the wrong include file   Wenyou Yang
  • [U-Boot] [PATCH v3] i2c: at91_i2c: Fix the wrong include file   Heiko Schocher
  • [U-Boot] [PATCH v3] i2c: at91_i2c: Fix the wrong include file   Heiko Schocher
    • [U-Boot] [PATCH v3] i2c: at91_i2c: Fix the wrong include file   Wenyou.Yang at microchip.com
• [U-Boot] [PATCH v3 0/2] serial: atmel_usart: Support to enable an early debug UART   Wenyou Yang
  • [U-Boot] [PATCH v3 1/2] serial: Kconfig: Add ATMEL_USART option   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 1/2] serial: Kconfig: Add ATMEL_USART option   Andreas Bießmann
  • [U-Boot] [PATCH v3 2/2] serial: atmel_usart: Support enable an early debug UART   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 2/2] serial: atmel_usart: Support enable an early debug UART   Andreas Bießmann
• [U-Boot] [PATCH v3 0/4] board: sama5d2_xplained: Convert to use device tree and drivers with DM   Wenyou Yang
  • [U-Boot] [PATCH v3 1/4] board: sama5d2_xplained: Move config options to defconfigs   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 1/4] board: sama5d2_xplained: Move config options to defconfigs   Andreas Bießmann
  • [U-Boot] [PATCH v3 2/4] board: sama5d2_xplained: Clean up code   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 2/4] board: sama5d2_xplained: Clean up code   Andreas Bießmann
  • [U-Boot] [PATCH v3 3/4] board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 3/4] board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC   Andreas Bießmann
  • [U-Boot] [PATCH v3 4/4] board: sama5d2_xplained: Enable an early debug UART   Wenyou Yang
    • [U-Boot] [U-Boot, v3, 4/4] board: sama5d2_xplained: Enable an early debug UART   Andreas Bießmann
• [U-Boot] [PATCH 0/2] libfdt: fix "Bring in upstream stringlist functions"   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] libfdt: fix fdt_stringlist_count()   Masahiro Yamada
    • [U-Boot] [PATCH 1/2] libfdt: fix fdt_stringlist_count()   Simon Glass
  • [U-Boot] [PATCH 2/2] libfdt: fix fdt_stringlist_search()   Masahiro Yamada
    • [U-Boot] [PATCH 2/2] libfdt: fix fdt_stringlist_search()   Simon Glass
• [U-Boot] [PATCH v2 0/5] Add i.MX HAB encryption support   Stefano Babic
• [U-Boot] [PATCH] armv8: ls2080aqds: fix SGMII repeater settings   shh.xie at gmail.com
• [U-Boot] [PATCH v6 0/5] net: fec_mxc: Convert to DM   Jagan Teki
  • [U-Boot] [PATCH v6 1/5] net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr   Jagan Teki
  • [U-Boot] [PATCH v6 2/5] net: fec_mxc: Convert into driver model   Jagan Teki
  • [U-Boot] [PATCH v6 3/5] net: fec_mxc: Driver cleanups   Jagan Teki
  • [U-Boot] [PATCH v6 4/5] ARM: dts: imx6qdl-icore: Add FEC support   Jagan Teki
  • [U-Boot] [PATCH v6 5/5] icorem6: Use CONFIG_DM_ETH support   Jagan Teki
• [U-Boot] Falcon Mode question & possibly SPL bugs   Adam Ford
• [U-Boot] i2c: mxc: refactor i2c driver and support dm   Jagan Teki
  • [U-Boot] i2c: mxc: refactor i2c driver and support dm   Peng Fan
  • [U-Boot] i2c: mxc: refactor i2c driver and support dm   Jagan Teki
• [U-Boot] [PATCH v2 0/2] libfdt: fix "Bring in upstream stringlist functions"   Masahiro Yamada
  • [U-Boot] [PATCH v2 1/2] libfdt: fix fdt_stringlist_count()   Masahiro Yamada
    • [U-Boot] [U-Boot,v2,1/2] libfdt: fix fdt_stringlist_count()   Tom Rini
  • [U-Boot] [PATCH v2 2/2] libfdt: fix fdt_stringlist_search()   Masahiro Yamada
    • [U-Boot] [U-Boot,v2,2/2] libfdt: fix fdt_stringlist_search()   Tom Rini
• [U-Boot] Question related to send a patch   Oscar Gomez Fuente
  • [U-Boot] Question related to send a patch   Michal Simek
• [U-Boot] [PATCH] ARM: zynq: Extend picozed board support   Michal Simek
  • [U-Boot] [PATCH] ARM: zynq: Extend picozed board support   Michal Simek
    • [U-Boot] [PATCH] ARM: zynq: Extend picozed board support   Oscar Gomez Fuente
      • [U-Boot] [PATCH] ARM: zynq: Extend picozed board support   Moritz Fischer
      • [U-Boot] [PATCH] ARM: zynq: Extend picozed board support   Michal Simek
      • [U-Boot] [PATCH] ARM: zynq: Extend picozed board support   Michal Simek
      • [U-Boot] [PATCH] ARM: zynq: Extend picozed board support   Oscar Gomez Fuente
      • [U-Boot] [PATCH] ARM: zynq: Extend picozed board support   Michal Simek
      • [U-Boot] [PATCH] ARM: zynq: Extend picozed board support   Oscar Gomez Fuente
• [U-Boot] [PATCH] Fix codying style broken by recent libfdt sync   Masahiro Yamada
  • [U-Boot] [PATCH] Fix codying style broken by recent libfdt sync   Simon Glass
  • [U-Boot] Fix codying style broken by recent libfdt sync   Tom Rini
• [U-Boot] [PATCH v3] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   linux-kernel-dev at beckhoff.com
  • [U-Boot] [PATCH v3] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   Jagan Teki
    • [U-Boot] [PATCH v3] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC   linux-kernel-dev
• [U-Boot] [PATCH 0/3] ARM: uniphier: some more UniPhier SoC code updates   Masahiro Yamada
  • [U-Boot] [PATCH 1/3] clk: uniphier: rework UniPhier clk driver   Masahiro Yamada
  • [U-Boot] [PATCH 2/3] ARM: uniphier: adjust fdt_file environment handling to latest Linux   Masahiro Yamada
  • [U-Boot] [PATCH 3/3] ARM: uniphier: remove unnecessary EHCI reset deassertion   Masahiro Yamada
  • [U-Boot] [PATCH 0/3] ARM: uniphier: some more UniPhier SoC code updates   Masahiro Yamada
• [U-Boot] [PATCH] doc/README.uniphier: add build instruction for 64bit SoCs   Masahiro Yamada
  • [U-Boot] [PATCH] doc/README.uniphier: add build instruction for 64bit SoCs   Masahiro Yamada
• [U-Boot] [PATCH 0/4] mx35, flea3: updates for the imx35 based flea3 board   Heiko Schocher
  • [U-Boot] [PATCH 2/4] mx35: factorize SDRAM setup in flea3   Heiko Schocher
  • [U-Boot] [PATCH 3/4] mx35: add GPIO setup on flea3 board   Heiko Schocher
  • [U-Boot] [PATCH 4/4] mx35: adjust default environment for flea3 board   Heiko Schocher
• [U-Boot] [PATCH 1/4] mx35: add DT support to flea3 board   Heiko Schocher
• [U-Boot] [PATCH v2] tpm: tpm_tis_lpc: Add support for AT97SC3204   George McCollister
  • [U-Boot] [PATCH v2] tpm: tpm_tis_lpc: Add support for AT97SC3204   Simon Glass
    • [U-Boot] [PATCH v2] tpm: tpm_tis_lpc: Add support for AT97SC3204   Simon Glass
• [U-Boot] [PATCH] libfdt: Sync overlay with upstream   Maxime Ripard
  • [U-Boot] [PATCH] libfdt: Sync overlay with upstream   Simon Glass
    • [U-Boot] [PATCH] libfdt: Sync overlay with upstream   Maxime Ripard
      • [U-Boot] [PATCH] libfdt: Sync overlay with upstream   Simon Glass
      • [U-Boot] [PATCH] libfdt: Sync overlay with upstream   Maxime Ripard
      • [U-Boot] [PATCH] libfdt: Sync overlay with upstream   Simon Glass
• [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
  • [U-Boot] [PATCH 2/2] ARM: tegra186: call secure monitor for all cache-wide ops   Stephen Warren
  • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   york sun
  • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
    • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   york sun
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   york sun
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
  • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Simon Glass
    • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Simon Glass
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Simon Glass
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Simon Glass
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Simon Glass
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Tom Rini
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Simon Glass
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Stephen Warren
      • [U-Boot] [PATCH 1/2] armv8: add hooks for all cache-wide operations   Tom Rini
• [U-Boot] [PATCH] test/py: ensure a log section exists for skipped tests   Stephen Warren
  • [U-Boot] test/py: ensure a log section exists for skipped tests   Tom Rini
  • [U-Boot] test/py: ensure a log section exists for skipped tests   Tom Rini
• [U-Boot] [ANN] U-Boot v2016.11-rc2 released   Tom Rini
  • [U-Boot] [ANN] U-Boot v2016.11-rc2 released   Heiko Schocher
  • [U-Boot] [ANN] U-Boot v2016.11-rc2 released   Peter Robinson
  • [U-Boot] [ANN] U-Boot v2016.11-rc2 released   Masahiro Yamada
• [U-Boot] [PATCH] sandboxfs: Fix resource leak   Tom Rini
  • [U-Boot] [PATCH] sandboxfs: Fix resource leak   Simon Glass
    • [U-Boot] [PATCH] sandboxfs: Fix resource leak   Simon Glass
• [U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program   Simon Glass
  • [U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program   Leif Lindholm
    • [U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program   Leif Lindholm
• [U-Boot] [U-Boot, RFC] arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally   Tom Rini
• [U-Boot] [PATCH v4 00/29] Kconfig: Move console options to Kconfig   Simon Glass
  • [U-Boot] [PATCH v4 02/29] Convert SILENT_CONSOLE options to Kconfig   Simon Glass
    • [U-Boot] [PATCH v4 02/29] Convert SILENT_CONSOLE options to Kconfig   Jagan Teki
    • [U-Boot] [U-Boot, v4, 02/29] Convert SILENT_CONSOLE options to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig   Simon Glass
    • [U-Boot] [PATCH v4 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig   Jagan Teki
    • [U-Boot] [U-Boot, v4, 03/29] Convert CONSOLE_PRE_CONSOLE_BUFFER options to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 04/29] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 04/29] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV et al to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 05/29] config: Drop CONFIG_CONSOLE   Simon Glass
    • [U-Boot] [PATCH v4 05/29] config: Drop CONFIG_CONSOLE   Jagan Teki
    • [U-Boot] [U-Boot,v4,05/29] config: Drop CONFIG_CONSOLE   Tom Rini
  • [U-Boot] [PATCH v4 06/29] config: Drop CONFIG_CONSOLE_DEV   Simon Glass
    • [U-Boot] [PATCH v4 06/29] config: Drop CONFIG_CONSOLE_DEV   Jagan Teki
    • [U-Boot] [U-Boot,v4,06/29] config: Drop CONFIG_CONSOLE_DEV   Tom Rini
  • [U-Boot] [PATCH v4 07/29] Convert CONFIG_VIDEO to Kconfig   Simon Glass
    • [U-Boot] [PATCH v4 07/29] Convert CONFIG_VIDEO to Kconfig   Jagan Teki
    • [U-Boot] [U-Boot,v4,07/29] Convert CONFIG_VIDEO to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 08/29] Convert CONFIG_CFB_CONSOLE to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 08/29] Convert CONFIG_CFB_CONSOLE to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 09/29] Convert CONFIG_CFB_CONSOLE_ANSI to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 09/29] Convert CONFIG_CFB_CONSOLE_ANSI to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 10/29] Convert CONFIG_VIDEO_CT69000 to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 10/29] Convert CONFIG_VIDEO_CT69000 to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 11/29] Convert CONFIG_SYS_CONSOLE_BG_COL et al to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 11/29] Convert CONFIG_SYS_CONSOLE_BG_COL et al to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 12/29] video: Drop the smiLynxEM driver   Simon Glass
    • [U-Boot] [U-Boot,v4,12/29] video: Drop the smiLynxEM driver   Tom Rini
  • [U-Boot] [PATCH v4 13/29] video: Drop the imx25lcdc driver   Simon Glass
    • [U-Boot] [U-Boot,v4,13/29] video: Drop the imx25lcdc driver   Tom Rini
  • [U-Boot] [PATCH v4 14/29] video: Drop the s3c-fb driver   Simon Glass
    • [U-Boot] [U-Boot,v4,14/29] video: Drop the s3c-fb driver   Tom Rini
  • [U-Boot] [PATCH v4 15/29] video: Drop the sed13806 driver   Simon Glass
    • [U-Boot] [U-Boot,v4,15/29] video: Drop the sed13806 driver   Tom Rini
  • [U-Boot] [PATCH v4 16/29] Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 16/29] Convert CONFIG_VGA_AS_SINGLE_DEVICE to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 17/29] video: Drop CONFIG_VIDEO_HW_CURSOR   Simon Glass
    • [U-Boot] [U-Boot,v4,17/29] video: Drop CONFIG_VIDEO_HW_CURSOR   Tom Rini
  • [U-Boot] [PATCH v4 18/29] Convert CONFIG_VIDEO_SW_CURSOR to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 18/29] Convert CONFIG_VIDEO_SW_CURSOR to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 19/29] video: Drop CONFIG_VIDEO_SW_CURSOR   Simon Glass
    • [U-Boot] [U-Boot,v4,19/29] video: Drop CONFIG_VIDEO_SW_CURSOR   Tom Rini
  • [U-Boot] [PATCH v4 20/29] Convert CONFIG_CONSOLE_EXTRA_INFO to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 20/29] Convert CONFIG_CONSOLE_EXTRA_INFO to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 21/29] video: Move video_get_info_str() prototype to a header file   Simon Glass
    • [U-Boot] [U-Boot, v4, 21/29] video: Move video_get_info_str() prototype to a header file   Tom Rini
  • [U-Boot] [PATCH v4 22/29] video: Drop CONFIG_CONSOLE_INFO_QUIET   Simon Glass
    • [U-Boot] [U-Boot, v4, 22/29] video: Drop CONFIG_CONSOLE_INFO_QUIET   Tom Rini
  • [U-Boot] [PATCH v4 23/29] Convert CONFIG_LCD to Kconfig   Simon Glass
    • [U-Boot] [PATCH v4 23/29] Convert CONFIG_LCD to Kconfig   Jagan Teki
    • [U-Boot] [U-Boot,v4,23/29] Convert CONFIG_LCD to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 24/29] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 24/29] Convert CONFIG_CONSOLE_SCROLL_LINES to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 25/29] Convert CONFIG_SYS_CONSOLE_ENV_OVERWRITE to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 25/29] Convert CONFIG_SYS_CONSOLE_ENV_OVERWRITE to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 26/29] Convert CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 26/29] Convert CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 27/29] Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 27/29] Convert CONFIG_SYS_CONSOLE_INFO_QUIET to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 28/29] Convert CONFIG_USB_KEYBOARD to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 28/29] Convert CONFIG_USB_KEYBOARD to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 29/29] Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig   Simon Glass
    • [U-Boot] [U-Boot, v4, 29/29] Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig   Tom Rini
  • [U-Boot] [PATCH v4 00/29] Kconfig: Move console options to Kconfig   Tom Rini
    • [U-Boot] [PATCH v4 00/29] Kconfig: Move console options to Kconfig   Simon Glass
• [U-Boot] [PATCH v4 01/29] Remove some merge markers   Simon Glass
  • [U-Boot] [PATCH v4 01/29] Remove some merge markers   Jagan Teki
  • [U-Boot] [U-Boot,v4,01/29] Remove some merge markers   Tom Rini
• [U-Boot] [PATCH v3 1/8] x86: Add implementations of setjmp() and longjmp()   Simon Glass
  • [U-Boot] [PATCH v3 2/8] efi: Use asmlinkage for EFIAPI   Simon Glass
    • [U-Boot] [PATCH v3 2/8] efi: Use asmlinkage for EFIAPI   Alexander Graf
      • [U-Boot] [PATCH v3 2/8] efi: Use asmlinkage for EFIAPI   Simon Glass
      • [U-Boot] [PATCH v3 2/8] efi: Use asmlinkage for EFIAPI   Alexander Graf
  • [U-Boot] [PATCH v3 3/8] efi: Fix missing EFIAPI specifiers   Simon Glass
  • [U-Boot] [PATCH v3 4/8] x86: Tidy up selection of building the EFI stub   Simon Glass
    • [U-Boot] [PATCH v3 4/8] x86: Tidy up selection of building the EFI stub   Bin Meng
  • [U-Boot] [PATCH v3 5/8] arm: efi: Add a hello world test program   Simon Glass
  • [U-Boot] [PATCH v3 6/8] x86: efi: Add EFI loader support for x86   Simon Glass
  • [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program   Simon Glass
    • [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program   Bin Meng
    • [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program   Alexander Graf
      • [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program   Simon Glass
      • [U-Boot] [PATCH v3 7/8] x86: efi: Add a hello world test program   Alexander Graf
  • [U-Boot] [PATCH v3 8/8] x86: Enable EFI loader support   Simon Glass
  • [U-Boot] [PATCH v3 1/8] x86: Add implementations of setjmp() and longjmp()   Bin Meng
    • [U-Boot] [PATCH v3 1/8] x86: Add implementations of setjmp() and longjmp()   Bin Meng
• [U-Boot] [PATCH v6 01/10] x86: Move table csum into separate header   Bin Meng
• [U-Boot] [PATCH v3 2/2] zynq: nand: Enable Nand flash controller driver a zynq board   Michal Simek
• [U-Boot] [PATCH 0/6] Add ARMv8 PSCI framework   Hongbo Zhang
  • [U-Boot] [PATCH 0/6] Add ARMv8 PSCI framework   york sun
    • [U-Boot] [PATCH 0/6] Add ARMv8 PSCI framework   Hongbo Zhang
  • [U-Boot] [PATCH 0/6] Add ARMv8 PSCI framework   Tom Rini
    • [U-Boot] [PATCH 0/6] Add ARMv8 PSCI framework   Hongbo Zhang
• [U-Boot] [v2, 5/5] arch/arm, arch/powerpc: enable workaround for eSDHC erratum A009620   Y.B. Lu
  • [U-Boot] [v2, 5/5] arch/arm, arch/powerpc: enable workaround for eSDHC erratum A009620   york sun
• [U-Boot] Booting a proprietary OS   dlbp90
  • [U-Boot] Booting a proprietary OS   Simon Glass
    • [U-Boot] Booting a proprietary OS   Paolo De Luca Bosso
      • [U-Boot] Booting a proprietary OS   Simon Glass
• [U-Boot] [PULL] efi patch queue 2016-10-18   Alexander Graf
  • [U-Boot] [PULL] efi patch queue 2016-10-18   Tom Rini
• [U-Boot] [PATCH] efi_loader: Revert device_handle to disk after net boot   Alexander Graf
  • [U-Boot] efi_loader: Revert device_handle to disk after net boot   Alexander Graf
• [U-Boot] [PATCH] net: add synopsys QoS ethernet driver   Nathan Sullivan
• [U-Boot] Help with spl: zImage support in Falcon mode   Diego Dorta
  • [U-Boot] Help with spl: zImage support in Falcon mode   Ladislav Michl
    • [U-Boot] Help with spl: zImage support in Falcon mode   Diego Dorta
    • [U-Boot] Help with spl: zImage support in Falcon mode   Ladislav Michl
  • [U-Boot] Help with spl: zImage support in Falcon mode   Fabio Estevam
• [U-Boot] *preferred* place in u-boot to tweak device tree?   Robert P. J. Day
• [U-Boot] Blackfin serial driver   Simon Glass
• [U-Boot] [PULL v2] efi patch queue 2016-10-18   Alexander Graf
  • [U-Boot] [PULL v2] efi patch queue 2016-10-18   Tom Rini
• [U-Boot] Issues with memory mapping for AT91SAM9G25-EK   Vasi Vilvoiu
• [U-Boot] Some issues with the python tests   Stefan Bruens
  • [U-Boot] Some issues with the python tests   Stephen Warren
• [U-Boot] [U-Boot, v1] watchdog: Fix Watchdog Reset while in U-Boot Prompt   Tom Rini
• [U-Boot] [PATCH] powerpc/t2080: DDR controller erratum A-009942   Hamish Martin
  • [U-Boot] [PATCH] powerpc/t2080: DDR controller erratum A-009942   york sun
    • [U-Boot] [PATCH] powerpc/t2080: DDR controller erratum A-009942   york sun
      • [U-Boot] [PATCH] powerpc/t2080: DDR controller erratum A-009942   Hamish Martin
      • [U-Boot] [PATCH] powerpc/t2080: DDR controller erratum A-009942   york sun
• [U-Boot] [PATCH] powerpc/t2080: CPU erratum A-007907   Darwin Dingel
  • [U-Boot] [PATCH] powerpc/t2080: CPU erratum A-007907   york sun
    • [U-Boot] [PATCH] powerpc/t2080: CPU erratum A-007907   Darwin Dingel
  • [U-Boot] [PATCH] powerpc/t2080: CPU erratum A-007907   Darwin Dingel
• [U-Boot] [PATCH v2] tools: moveconfig: support wildcards in --defconfigs file   Masahiro Yamada
  • [U-Boot] [PATCH v2] tools: moveconfig: support wildcards in --defconfigs file   Joe Hershberger
  • [U-Boot] [U-Boot, v2] tools: moveconfig: support wildcards in --defconfigs file   Tom Rini
• [U-Boot] [PATCH v10] dm: at91: Add driver model support for the spi driver   Wenyou.Yang at microchip.com
• [U-Boot] [PULL v3] efi patch queue 2016-10-19   Alexander Graf
  • [U-Boot] [PULL v3] efi patch queue 2016-10-19   Bin Meng
    • [U-Boot] [PULL v3] efi patch queue 2016-10-19   Alexander Graf
  • [U-Boot] [PULL v3] efi patch queue 2016-10-19   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: uniphier: remove unneeded mdelay(1) in PLL setting function   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] ARM: uniphier: remove unneeded mdelay(1) in PLL setting function   Masahiro Yamada
• [U-Boot] [PATCH 2/2] ARM: uniphier: enable SSC for {C, S2, M, VP, GP}PLL for LD20 SoC   Masahiro Yamada
• [U-Boot] [PATCH 0/5] Update LS2080A SoC code to support LS2088A SoC   Priyanka Jain
  • [U-Boot] [PATCH 1/5] armv8: lsch3: Use SVR based timer base address detection   Priyanka Jain
    • [U-Boot] [PATCH 1/5] armv8: lsch3: Use SVR based timer base address detection   Prabhakar Kushwaha
      • [U-Boot] [PATCH 1/5] armv8: lsch3: Use SVR based timer base address detection   york sun
      • [U-Boot] [PATCH 1/5] armv8: lsch3: Use SVR based timer base address detection   Priyanka Jain
      • [U-Boot] [PATCH 1/5] armv8: lsch3: Use SVR based timer base address detection   york sun
  • [U-Boot] [PATCH 3/5] armv8: fsl-layerscape : Check SVR for initializing TZASC   Priyanka Jain
  • [U-Boot] [PATCH 4/5] armv8: fsl-layerscape: Add NXP LS2088A SoC support   Priyanka Jain
    • [U-Boot] [PATCH 4/5] armv8: fsl-layerscape: Add NXP LS2088A SoC support   Prabhakar Kushwaha
      • [U-Boot] [PATCH 4/5] armv8: fsl-layerscape: Add NXP LS2088A SoC support   Priyanka Jain
• [U-Boot] [PATCH 2/5] armv8: fsl-layerscape: Update TZASC registers type   Priyanka Jain
• [U-Boot] [PATCH 5/5] armv8/fsl-lsch3: Update code to release secondary cores   Priyanka Jain
• [U-Boot] [PATCH v1] arm: Add support for PDU001   Felix Brack
  • [U-Boot] [PATCH v1] arm: Add support for PDU001   Tom Rini
  • [U-Boot] [PATCH v1] arm: Add support for PDU001   Simon Glass
    • [U-Boot] [PATCH v1] arm: Add support for PDU001   Felix Brack
      • [U-Boot] [PATCH v1] arm: Add support for PDU001   Simon Glass
• [U-Boot] A33 tablet u-boot not boot (fel +sdbreakout).   far5893
• [U-Boot] [PATCH v7 0/5] net: fec_mxc: Convert to DM   Jagan Teki
  • [U-Boot] [PATCH v7 2/5] net: fec_mxc: Convert into driver model   Jagan Teki
    • [U-Boot] [PATCH v7 2/5] net: fec_mxc: Convert into driver model   Jagan Teki
    • [U-Boot] [PATCH v7 2/5] net: fec_mxc: Convert into driver model   Joe Hershberger
  • [U-Boot] [PATCH v7 3/5] net: fec_mxc: Driver cleanups   Jagan Teki
  • [U-Boot] [PATCH v7 4/5] ARM: dts: imx6qdl-icore: Add FEC support   Jagan Teki
  • [U-Boot] [PATCH v7 5/5] icorem6: Use CONFIG_DM_ETH support   Jagan Teki
  • [U-Boot] [PATCH v7 0/5] net: fec_mxc: Convert to DM   Jagan Teki
• [U-Boot] [PATCH v7 1/5] net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr   Jagan Teki
• [U-Boot] [PATCH 0/4] dm: i2c: Add I2C support for i.CoreM6   Jagan Teki
  • [U-Boot] [PATCH 2/4] i2c: mxc: Print hex instead of decimal for bus address   Jagan Teki
  • [U-Boot] [PATCH 3/4] i2c: mxc: Make 'no gpio pinctrl state' print as debug   Jagan Teki
  • [U-Boot] [PATCH 4/4] imx6: icorem6: Add I2C support   Jagan Teki
• [U-Boot] [PATCH 1/4] i2c: Kconfig: Add SYS_I2C_MXC entry   Jagan Teki
• [U-Boot] Multi boot selection scenarios   Marcel Gielen [Celestia-STS]
• [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support   Alexander Graf
  • [U-Boot] [PATCH v6 5/6] armv8: fsl-layerscape: Add support for efi_loader RTS reset   Alexander Graf
  • [U-Boot] [PATCH v6 6/6] ls2080ardb: Convert to distro boot   Alexander Graf
    • [U-Boot] [PATCH v6 6/6] ls2080ardb: Convert to distro boot   york sun
      • [U-Boot] [PATCH v6 6/6] ls2080ardb: Convert to distro boot   Alexander Graf
• [U-Boot] [PATCH v6 1/6] ls2080: Exit dpaa only right before exiting U-Boot   Alexander Graf
• [U-Boot] [PATCH v6 2/6] efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3   Alexander Graf
• [U-Boot] [PATCH v6 3/6] ls2080ardb: Reserve DP-DDR RAM   Alexander Graf
• [U-Boot] [PATCH v6 4/6] armv8: ls2080a: Declare spin tables as reserved for efi loader   Alexander Graf
  • [U-Boot] [PATCH v6 4/6] armv8: ls2080a: Declare spin tables as reserved for efi loader   york sun
• [U-Boot] [PATCH] api: storage: Avoid enumeration for non-configured subsystem   Emmanuel Vadot
  • [U-Boot] api: storage: Avoid enumeration for non-configured subsystem   Tom Rini
• [U-Boot] [PATCH] efi_loader: fix depends on line of EFI_LOADER   Masahiro Yamada
  • [U-Boot] efi_loader: fix depends on line of EFI_LOADER   Alexander Graf
• [U-Boot] [PATCH v2 2/2] armv8: s32v234: Introduce basic support for s32v234evb   Eddy Petrișor
  • [U-Boot] [PATCH v2 2/2] armv8: s32v234: Introduce basic support for s32v234evb   El-Sharkawy, Mohamed A.
• [U-Boot] [PATCH V2 1/4] ARM: tegra: ensure nvtboot_boot_x0 alignment   Stephen Warren
  • [U-Boot] [PATCH V2 1/4] ARM: tegra: ensure nvtboot_boot_x0 alignment   Stephen Warren
    • [U-Boot] [PATCH V2 1/4] ARM: tegra: ensure nvtboot_boot_x0 alignment   Tom Warren
• [U-Boot] [PATCH V2 2/4] ARM: tegra: translate __asm_flush_l3_cache to assembly   Stephen Warren
• [U-Boot] [PATCH V2 3/4] armv8: add hooks for all cache-wide operations   Stephen Warren
  • [U-Boot] [PATCH V2 3/4] armv8: add hooks for all cache-wide operations   Simon Glass
• [U-Boot] [PATCH V2 4/4] ARM: tegra186: call secure monitor for all cache-wide ops   Stephen Warren
• [U-Boot] [PATCH v2] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Masahiro Yamada
  • [U-Boot] [PATCH v2] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Alexey Brodkin
    • [U-Boot] [PATCH v2] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Masahiro Yamada
      • [U-Boot] [PATCH v2] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Alexey Brodkin
      • [U-Boot] [PATCH v2] libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORY   Simon Glass
• [U-Boot] [PATCH v1 0/3] net: macb: Add option and clock support   Wenyou Yang
  • [U-Boot] [PATCH v1 1/3] net: Kconfig: Add CONFIG_MACB option   Wenyou Yang
  • [U-Boot] [PATCH v1 2/3] net: macb: Add the clock support   Wenyou Yang
• [U-Boot] [PATCH v1 3/3] net: macb: Remove redundant #ifdef CONFIG_DM_ETH   Wenyou Yang
• [U-Boot] [RFC PATCH v1 0/6] pxa3xx_nand updates   Chris Packham
  • [U-Boot] [RFC PATCH v1 1/6] mtd: nand: pxa3xx_nand: Increase initial buffer size   Chris Packham
    • [U-Boot] [RFC PATCH v1 1/6] mtd: nand: pxa3xx_nand: Increase initial buffer size   Ezequiel Garcia
      • [U-Boot] [RFC PATCH v1 1/6] mtd: nand: pxa3xx_nand: Increase initial buffer size   Chris Packham
      • [U-Boot] [RFC PATCH v1 1/6] mtd: nand: pxa3xx_nand: Increase initial buffer size   Ezequiel Garcia
  • [U-Boot] [RFC PATCH v1 2/6] mtd: nand: pxa3xx_nand: use nand_to_mtd()   Chris Packham
  • [U-Boot] [RFC PATCH v1 3/6] mtd: nand: pxa3xx_nand: sync pxa3xx_nand_set_sdr_timing()   Chris Packham
  • [U-Boot] [RFC PATCH v1 4/6] mtd: nand: pxa3xx_nand: fix early spurious interrupt   Chris Packham
  • [U-Boot] [RFC PATCH v1 5/6] mtd: nand: pxa3xx-nand: fix random command timeouts   Chris Packham
  • [U-Boot] [RFC PATCH v1 6/6] mtd: nand: pxa3xx_nand: add support for partial chunks   Chris Packham
• [U-Boot] [PATCH 1/3] armv8/ls1043a: fixup GIC offset according to SVR and GIC400_ADDR_ALIGN_64K[GIC_ADDR]   Wenbin song
  • [U-Boot] [PATCH 2/3] armv8/fsl-layerscape: fdt: fixup GIC node for LS1043A rev1   Wenbin song
• [U-Boot] [PATCH 3/3] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node   Wenbin song
• [U-Boot] u-boot, powerpc and multilib and linker scripts   Michael Walle
• [U-Boot] [PATCH v2 1/3] armv8/ls1043a: fixup GIC offset according to SVR and GIC400_ADDR_ALIGN_64K[GIC_ADDR]   Wenbin song
  • [U-Boot] [PATCH v2 3/3] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node   Wenbin song
  • [U-Boot] [PATCH v2 1/3] armv8/ls1043a: fixup GIC offset according to SVR and GIC400_ADDR_ALIGN_64K[GIC_ADDR]   york sun
• [U-Boot] [PATCH v2 2/3] armv8/fsl-layerscape: fdt: fixup GIC node for LS1043A rev1   Wenbin song
• [U-Boot] [PATCH v3 2/3] spi: zynqmp_qspi: Add QSPI driver support for ZynqMP   S Durga Prasad Paladugu
  • [U-Boot] [PATCH v3 2/3] spi: zynqmp_qspi: Add QSPI driver support for ZynqMP   Jagan Teki
• [U-Boot] [PATCH v3 1/3] spi: spi_flash: Dont set quad enable for micron in all cases   S Durga Prasad Paladugu
  • [U-Boot] [PATCH v3 1/3] spi: spi_flash: Dont set quad enable for micron in all cases   Jagan Teki
• [U-Boot] [PATCH] i2c: designware: Avoid overwriting the cmd_data register   Marek Vasut
• [U-Boot] Altera CycloneV socfpga development kit QSPI flash access from u-boot   Marcel Gielen [Celestia-STS]
• [U-Boot] [PATCH 0/4] am57xx: Add fastboot support   Sam Protsenko
  • [U-Boot] [PATCH 1/4] fastboot: Add CONFIG_FASTBOOT_USB_DEV option   Sam Protsenko
    • [U-Boot] [PATCH 1/4] fastboot: Add CONFIG_FASTBOOT_USB_DEV option   Tom Rini
  • [U-Boot] [PATCH 2/4] ti_omap5_common: Respect USB controller number in fastboot   Sam Protsenko
    • [U-Boot] [PATCH 2/4] ti_omap5_common: Respect USB controller number in fastboot   Tom Rini
      • [U-Boot] [PATCH 2/4] ti_omap5_common: Respect USB controller number in fastboot   Sam Protsenko
  • [U-Boot] [PATCH 3/4] configs: am57xx: Enable download gadget   Sam Protsenko
    • [U-Boot] [PATCH 3/4] configs: am57xx: Enable download gadget   Tom Rini
  • [U-Boot] [PATCH 4/4] configs: am57xx: Enable fastboot   Sam Protsenko
    • [U-Boot] [PATCH 4/4] configs: am57xx: Enable fastboot   Tom Rini
• [U-Boot] Loading kernel from SD card slow on MinnowBoard Turbot since v2016.09   Raschen Josef
  • [U-Boot] Loading kernel from SD card slow on MinnowBoard Turbot since v2016.09   Jaehoon Chung
    • [U-Boot] Loading kernel from SD card slow on MinnowBoard Turbot since v2016.09   Bin Meng
      • [U-Boot] Loading kernel from SD card slow on MinnowBoard Turbot since v2016.09   Jaehoon Chung
      • [U-Boot] Loading kernel from SD card slow on MinnowBoard Turbot since v2016.09   Jaehoon Chung
      • [U-Boot] Loading kernel from SD card slow on MinnowBoard Turbot since v2016.09   Raschen Josef
      • [U-Boot] Loading kernel from SD card slow on MinnowBoard Turbot since v2016.09   Jaehoon Chung
      • [U-Boot] Loading kernel from SD card slow on MinnowBoard Turbot since v2016.09   Raschen Josef
• [U-Boot] [RFC] Proposal on changing raw boot mode   Sam Protsenko
  • [U-Boot] [RFC] Proposal on changing raw boot mode   Alexander Graf
  • [U-Boot] [RFC] Proposal on changing raw boot mode   Anatolij Gustschin
  • [U-Boot] [RFC] Proposal on changing raw boot mode   Tom Rini
• [U-Boot] [PATCH 0/8] dm: Update on serial driver progress   Simon Glass
  • [U-Boot] [PATCH 0/8] dm: Update on serial driver progress   Marcel Ziswiler
    • [U-Boot] [PATCH 0/8] dm: Update on serial driver progress   Marek Vasut
      • [U-Boot] [PATCH 0/8] dm: Update on serial driver progress   Simon Glass
      • [U-Boot] [PATCH 0/8] dm: Update on serial driver progress   Marcel Ziswiler
• [U-Boot] [PATCH 1/8] arm: Remove colibri_pxa270 board   Simon Glass
• [U-Boot] [PATCH 2/8] arm: Remove h2200 board   Simon Glass
• [U-Boot] [PATCH 3/8] arm: Remove zipitz2 board   Simon Glass
• [U-Boot] [PATCH 4/8] arm: Drop pxa serial driver   Simon Glass
• [U-Boot] [PATCH 5/8] serial: Update docs to indicate mcfuart supports DM_SERIAL   Simon Glass
• [U-Boot] [PATCH 6/8] arm: Remove smdk2410 board   Simon Glass
• [U-Boot] [PATCH 7/8] arm: Remove VCMA9 board   Simon Glass
• [U-Boot] [PATCH 8/8] serial: Drop the s3c24x0 serial driver   Simon Glass
• [U-Boot] [PATCH 0/8] Various travis-ci improvements   Tom Rini
  • [U-Boot] [PATCH 1/8] test/py: ensure a log section exists for skipped tests   Tom Rini
  • [U-Boot] [PATCH 2/8] travis-ci: Switch to Ubuntu 14.04 'Trusty Tahr'   Tom Rini
    • [U-Boot] [PATCH 2/8] travis-ci: Switch to Ubuntu 14.04 'Trusty Tahr'   Heiko Schocher
    • [U-Boot] [PATCH 2/8] travis-ci: Switch to Ubuntu 14.04 'Trusty Tahr'   Tom Rini
  • [U-Boot] [PATCH 3/8] travis-ci: Use a git URI for dtc.git   Tom Rini
    • [U-Boot] [PATCH 3/8] travis-ci: Use a git URI for dtc.git   Heiko Schocher
    • [U-Boot] [PATCH 3/8] travis-ci: Use a git URI for dtc.git   Tom Rini
  • [U-Boot] [PATCH 4/8] travis-ci: Do not make buildman warnings fatal   Tom Rini
    • [U-Boot] [PATCH 4/8] travis-ci: Do not make buildman warnings fatal   Heiko Schocher
      • [U-Boot] [PATCH 4/8] travis-ci: Do not make buildman warnings fatal   Tom Rini
    • [U-Boot] [PATCH 4/8] travis-ci: Do not make buildman warnings fatal   Tom Rini
  • [U-Boot] [PATCH 5/8] travis-ci: Update toolchain and buildman usage   Tom Rini
    • [U-Boot] [PATCH 5/8] travis-ci: Update toolchain and buildman usage   Heiko Schocher
    • [U-Boot] [PATCH 5/8] travis-ci: Update toolchain and buildman usage   Tom Rini
  • [U-Boot] [PATCH 6/8] travis-ci: Add more architectures   Tom Rini
    • [U-Boot] [PATCH 6/8] travis-ci: Add more architectures   Heiko Schocher
    • [U-Boot] [PATCH 6/8] travis-ci: Add more architectures   Tom Rini
  • [U-Boot] [PATCH 7/8] travis-ci: Drop 'TEST_CMD'   Tom Rini
    • [U-Boot] [PATCH 7/8] travis-ci: Drop 'TEST_CMD'   Heiko Schocher
    • [U-Boot] [PATCH 7/8] travis-ci: Drop 'TEST_CMD'   Tom Rini
  • [U-Boot] [PATCH 8/8] travis-ci: Add test.py for various qemu platforms   Tom Rini
    • [U-Boot] [PATCH v2 8/8] travis-ci: Add test.py for various qemu platforms   Tom Rini
      • [U-Boot] [PATCH v2 8/8] travis-ci: Add test.py for various qemu platforms   Stephen Warren
      • [U-Boot] [PATCH v2 8/8] travis-ci: Add test.py for various qemu platforms   Tom Rini
      • [U-Boot] [PATCH v2 8/8] travis-ci: Add test.py for various qemu platforms   Stephen Warren
      • [U-Boot] [PATCH v2 8/8] travis-ci: Add test.py for various qemu platforms   Tom Rini
      • [U-Boot] [PATCH v2 8/8] travis-ci: Add test.py for various qemu platforms   Tom Rini
    • [U-Boot] [PATCH 8/8] travis-ci: Add test.py for various qemu platforms   Heiko Schocher
• [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Andre Przywara
  • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Jagan Teki
    • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Andre Przywara
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Hans de Goede
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   André Przywara
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Jagan Teki
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Hans de Goede
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Jagan Teki
  • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Jagan Teki
    • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   André Przywara
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Andreas Färber
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Jagan Teki
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Jagan Teki
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   André Przywara
      • [U-Boot] [PATCH] arm: dts: Pine64: add Ethernet alias   Jagan Teki
  • [U-Boot] [linux-sunxi] [PATCH] arm: dts: Pine64: add Ethernet alias   Hans de Goede
• [U-Boot] [PATCH 0/2] arm64: Pine64/A64: USB support   Andre Przywara
  • [U-Boot] [PATCH 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   Andre Przywara
    • [U-Boot] [PATCH 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   Jagan Teki
      • [U-Boot] [PATCH 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   André Przywara
      • [U-Boot] [PATCH 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   Jagan Teki
      • [U-Boot] [PATCH 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   André Przywara
      • [U-Boot] [PATCH 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   Jagan Teki
    • [U-Boot] [U-Boot, 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   Hans de Goede
      • [U-Boot] [U-Boot, 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   Marek Vasut
      • [U-Boot] [U-Boot, 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   André Przywara
      • [U-Boot] [U-Boot, 1/2] drivers: USB: OHCI: allow compilation for 64-bit targets   Marek Vasut
  • [U-Boot] [PATCH 2/2] sunxi: A64: enable USB support   Andre Przywara
    • [U-Boot] [PATCH 2/2] sunxi: A64: enable USB support   Jagan Teki
      • [U-Boot] [PATCH 2/2] sunxi: A64: enable USB support   Amit Tomer
      • [U-Boot] [PATCH 2/2] sunxi: A64: enable USB support   Jagan Teki
    • [U-Boot] [U-Boot,2/2] sunxi: A64: enable USB support   Hans de Goede
      • [U-Boot] [linux-sunxi] Re: [U-Boot, 2/2] sunxi: A64: enable USB support   Hans de Goede
• [U-Boot] [PATCH v1 0/3] gpio: at91_gpio: Add option and clock support   Wenyou Yang
  • [U-Boot] [PATCH v1 1/3] gpio: Kconfig: Add CONFIG_AT91_GPIO option   Wenyou Yang
    • [U-Boot] [PATCH v1 1/3] gpio: Kconfig: Add CONFIG_AT91_GPIO option   Simon Glass
  • [U-Boot] [PATCH v1 2/3] gpio: at91_gpio: Add the device tree support   Wenyou Yang
    • [U-Boot] [PATCH v1 2/3] gpio: at91_gpio: Add the device tree support   Simon Glass
  • [U-Boot] [PATCH v1 3/3] gpio: at91_gpio: Add the clock support   Wenyou Yang
    • [U-Boot] [PATCH v1 3/3] gpio: at91_gpio: Add the clock support   Simon Glass
• [U-Boot] [PATCH] Kconfig: ifc: Moving IFC_BANK_COUNT from Kconfig to config.h   Prabhakar Kushwaha
  • [U-Boot] [PATCH] Kconfig: ifc: Moving IFC_BANK_COUNT from Kconfig to config.h   york sun
    • [U-Boot] [PATCH] Kconfig: ifc: Moving IFC_BANK_COUNT from Kconfig to config.h   Prabhakar Kushwaha
      • [U-Boot] [PATCH] Kconfig: ifc: Moving IFC_BANK_COUNT from Kconfig to config.h   york sun
      • [U-Boot] [PATCH] Kconfig: ifc: Moving IFC_BANK_COUNT from Kconfig to config.h   Prabhakar Kushwaha
      • [U-Boot] [PATCH] Kconfig: ifc: Moving IFC_BANK_COUNT from Kconfig to config.h   york sun
• [U-Boot] [PATCH v3 1/3] armv8/ls1043a: fixup GIC offset according to SVR and SCFG_GIC400_ALIGN[GIC_ADDR_BIT]   Wenbin song
  • [U-Boot] [PATCH v3 2/3] armv8/fsl-layerscape: fdt: fixup GIC node for LS1043A rev1.0   Wenbin song
    • [U-Boot] [PATCH v3 2/3] armv8/fsl-layerscape: fdt: fixup GIC node for LS1043A rev1.0   york sun
      • [U-Boot] [PATCH v3 2/3] armv8/fsl-layerscape: fdt: fixup GIC node for LS1043A rev1.0   Wenbin Song
  • [U-Boot] [PATCH v3 3/3] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node   Wenbin song
  • [U-Boot] [PATCH v3 1/3] armv8/ls1043a: fixup GIC offset according to SVR and SCFG_GIC400_ALIGN[GIC_ADDR_BIT]   york sun
• [U-Boot] [PATCH] tools: mkimage: Check if file is regular file   Michal Simek
• [U-Boot] [PATCH] ls2080: Add USB boot to distro boot order   Alexander Graf
  • [U-Boot] [PATCH] ls2080: Add USB boot to distro boot order   york sun
• [U-Boot] [PATCH] mmc: sdhci: assign to clk_mul when host version is upper than SD3.0   Jaehoon Chung
  • [U-Boot] [PATCH] mmc: sdhci: assign to clk_mul when host version is upper than SD3.0   Jaehoon Chung
• [U-Boot] [PATCH] ARM: mx6: add MMC2 boot device detection support in SPL   Marcin Niestroj
• [U-Boot] [PATCH v2] Allow console input to be disabled   Egor
• [U-Boot] [PATCH V3 1/2] dt: net: add DWC EQoS binding   Stephen Warren
  • [U-Boot] [PATCH V3 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
    • [U-Boot] [PATCH V3 2/2] net: add driver for Synopsys Ethernet QoS device   Stephen Warren
• [U-Boot] [PATCH] net: phy: micrel: center FLP burst timing at 16ms   Ash Charles
  • [U-Boot] [PATCH v2] net: phy: micrel: center FLP burst timing at 16ms   Ash Charles
• [U-Boot] kwbimage use after free   Jonathan Gray
• [U-Boot] [PATCH] omap3logic: Fix Auto detect Logic PD Models   Adam Ford
  • [U-Boot] [PATCH] omap3logic: Fix Auto detect Logic PD Models   Tom Rini
• [U-Boot] [PATCH 1/4] Fix spelling of "multiple".   Vagrant Cascadian
  • [U-Boot] [PATCH 4/4] Fix spelling of "resetting".   Vagrant Cascadian
    • [U-Boot] [PATCH 4/4] Fix spelling of "resetting".   Simon Glass
  • [U-Boot] [PATCH 1/4] Fix spelling of "multiple".   Simon Glass
• [U-Boot] [PATCH 2/4] Fix spelling of "occur".   Vagrant Cascadian
  • [U-Boot] [PATCH 2/4] Fix spelling of "occur".   Angelo Dureghello
  • [U-Boot] [PATCH 2/4] Fix spelling of "occur".   Simon Glass
• [U-Boot] [PATCH 3/4] Fix spelling of "extended".   Vagrant Cascadian
  • [U-Boot] [PATCH 3/4] Fix spelling of "extended".   Simon Glass
• [U-Boot] [PATCH 1/5] arm: dts: exynos4x12: fix the minor things   Jaehoon Chung
  • [U-Boot] [PATCH 2/5] arm: dts: exynos4x12: remove the dupulicated node   Jaehoon Chung
    • [U-Boot] [PATCH 2/5] arm: dts: exynos4x12: remove the dupulicated node   Simon Glass
      • [U-Boot] [PATCH 2/5] arm: dts: exynos4x12: remove the dupulicated node   Jaehoon Chung
  • [U-Boot] [PATCH 3/5] arm: dts: exynos4: change the compatible to meaning name   Jaehoon Chung
    • [U-Boot] [PATCH 3/5] arm: dts: exynos4: change the compatible to meaning name   Simon Glass
      • [U-Boot] [PATCH 3/5] arm: dts: exynos4: change the compatible to meaning name   Jaehoon Chung
  • [U-Boot] [PATCH 4/5] arm: dts: exynos4: change to use their parent node   Jaehoon Chung
    • [U-Boot] [PATCH 4/5] arm: dts: exynos4: change to use their parent node   Simon Glass
      • [U-Boot] [PATCH 4/5] arm: dts: exynos4: change to use their parent node   Jaehoon Chung
  • [U-Boot] [PATCH 5/5] configs: add the CONFIG_BLK and CONFIG_DM_MMC/OPS for exynos4 series   Jaehoon Chung
    • [U-Boot] [PATCH 5/5] configs: add the CONFIG_BLK and CONFIG_DM_MMC/OPS for exynos4 series   Simon Glass
      • [U-Boot] [PATCH 5/5] configs: add the CONFIG_BLK and CONFIG_DM_MMC/OPS for exynos4 series   Jaehoon Chung
  • [U-Boot] [PATCH 1/5] arm: dts: exynos4x12: fix the minor things   Tom Rini
    • [U-Boot] [PATCH 1/5] arm: dts: exynos4x12: fix the minor things   Jaehoon Chung
• [U-Boot] [PATCH] mmc: add the device name in debugging message for supplying vmmc   Jaehoon Chung
  • [U-Boot] [PATCH] mmc: add the device name in debugging message for supplying vmmc   Peng Fan
    • [U-Boot] [PATCH] mmc: add the device name in debugging message for supplying vmmc   Jaehoon Chung
• [U-Boot] [PATCH v4 1/2] armv8/ls1043a: fixup GIC offset according to SVR and SCFG_GIC400_ALIGN[GIC_ADDR_BIT]   Wenbin song
  • [U-Boot] [PATCH v4 1/2] armv8/ls1043a: fixup GIC offset according to SVR and SCFG_GIC400_ALIGN[GIC_ADDR_BIT]   york sun
    • [U-Boot] [PATCH v4 1/2] armv8/ls1043a: fixup GIC offset according to SVR and SCFG_GIC400_ALIGN[GIC_ADDR_BIT]   Wenbin Song
      • [U-Boot] [PATCH v4 1/2] armv8/ls1043a: fixup GIC offset according to SVR and SCFG_GIC400_ALIGN[GIC_ADDR_BIT]   york sun
• [U-Boot] [PATCH v4 2/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node   Wenbin song
• [U-Boot] [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load   Priyanka Jain
• [U-Boot] [PATCH 0/5][v2] Update LS2080A SoC code to support LS2088A SoC   Priyanka Jain
  • [U-Boot] [PATCH 2/5][v2] armv8: fsl-layerscape: Update TZASC registers type   Priyanka Jain
  • [U-Boot] [PATCH 0/5][v2] Update LS2080A SoC code to support LS2088A SoC   york sun
    • [U-Boot] [PATCH 0/5][v2] Update LS2080A SoC code to support LS2088A SoC   Priyanka Jain
• [U-Boot] [PATCH 1/5][v2] armv8: lsch3: Use SVR based timer base address detection   Priyanka Jain
• [U-Boot] [PATCH 3/5][v2] armv8: fsl-layerscape : Check SVR for initializing TZASC   Priyanka Jain
  • [U-Boot] [PATCH 3/5][v2] armv8: fsl-layerscape : Check SVR for initializing TZASC   york sun
  • [U-Boot] [PATCH 3/5][v2] armv8: fsl-layerscape : Check SVR for initializing TZASC   york sun
• [U-Boot] [PATCH 4/5][v2] armv8: fsl-layerscape: Add NXP LS2088A SoC support   Priyanka Jain
  • [U-Boot] [PATCH 4/5][v2] armv8: fsl-layerscape: Add NXP LS2088A SoC support   york sun
• [U-Boot] [PATCH 5/5][v2] armv8/fsl-lsch3: Update code to release secondary cores   Priyanka Jain
  • [U-Boot] [PATCH 5/5][v2] armv8/fsl-lsch3: Update code to release secondary cores   york sun
  • [U-Boot] [PATCH 5/5][v2] armv8/fsl-lsch3: Update code to release secondary cores   york sun
  • [U-Boot] [PATCH 5/5][v2] armv8/fsl-lsch3: Update code to release secondary cores   york sun
    • [U-Boot] [PATCH 5/5][v2] armv8/fsl-lsch3: Update code to release secondary cores   Priyanka Jain
• [U-Boot] [PATCH v8 00/23] imx6: Add Engicam i.CoreM6 QDL support   Jagan Teki
  • [U-Boot] [PATCH v8 01/23] serial: Kconfig: Add MXC_UART entry   Jagan Teki
    • [U-Boot] [PATCH v8 01/23] serial: Kconfig: Add MXC_UART entry   Markus Niebel
      • [U-Boot] [PATCH v8 01/23] serial: Kconfig: Add MXC_UART entry   Jagan Teki
  • [U-Boot] [PATCH v8 02/23] thermal: Kconfig: Add IMX_THERMAL entry   Jagan Teki
  • [U-Boot] [PATCH v8 03/23] config: Move CONFIG_DEFAULT_FDT_FILE to defconfigs   Jagan Teki
  • [U-Boot] [PATCH v8 04/23] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support   Jagan Teki
  • [U-Boot] [PATCH v8 05/23] net: Kconfig: Add FEC_MXC entry   Jagan Teki
    • [U-Boot] [PATCH v8 05/23] net: Kconfig: Add FEC_MXC entry   Markus Niebel
      • [U-Boot] [PATCH v8 05/23] net: Kconfig: Add FEC_MXC entry   Jagan Teki
  • [U-Boot] [PATCH v8 06/23] imx6: icorem6: Add ENET support   Jagan Teki
  • [U-Boot] [PATCH v8 07/23] imx: s/docs\/README.imximage/doc\/README.imximage/g   Jagan Teki
  • [U-Boot] [PATCH v8 08/23] arm: dts: Add devicetree for i.MX6DL   Jagan Teki
  • [U-Boot] [PATCH v8 09/23] arm: dts: Add devicetree for i.MX6DQL   Jagan Teki
  • [U-Boot] [PATCH v8 10/23] arm: dts: imx6dl: Add pinctrl defines   Jagan Teki
  • [U-Boot] [PATCH v8 11/23] dt-bindings: clock: imx6qdl: Add clock defines   Jagan Teki
  • [U-Boot] [PATCH v8 12/23] arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo   Jagan Teki
  • [U-Boot] [PATCH v8 13/23] imx6q: icorem6: Enable pinctrl driver   Jagan Teki
  • [U-Boot] [PATCH v8 14/23] configs: imx6qdl: Enable CONFIG_BLK if DM_MMC   Jagan Teki
  • [U-Boot] [PATCH v8 15/23] configs: imx6qdl: Enable CONFIG_DM_MMC_OPS if DM_MMC   Jagan Teki
  • [U-Boot] [PATCH v8 16/23] engicam: icorem6: Add DM_GPIO, DM_MMC support   Jagan Teki
  • [U-Boot] [PATCH v8 17/23] arm: dts: Add devicetree for i.MX6Q   Jagan Teki
  • [U-Boot] [PATCH v8 18/23] arm: dts: imx6q: Add pinctrl defines   Jagan Teki
  • [U-Boot] [PATCH v8 19/23] arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual   Jagan Teki
  • [U-Boot] [PATCH v8 20/23] mtd: nand: Kconfig: Add NAND_MXS entry   Jagan Teki
  • [U-Boot] [PATCH v8 21/23] imx6: icorem6: Add NAND support   Jagan Teki
  • [U-Boot] [PATCH v8 22/23] imx6: icorem6: Enable MTD device support   Jagan Teki
  • [U-Boot] [PATCH v8 23/23] imx6: icorem6: Add default mtd nand partition table   Jagan Teki
• [U-Boot] [PATCH] mx6sabresd: Make Ethernet functional again   Fabio Estevam
• [U-Boot] [PATCH v2 0/4] am57xx: Add fastboot support   Sam Protsenko
  • [U-Boot] [PATCH v2 1/4] fastboot: Add CONFIG_FASTBOOT_USB_DEV option   Sam Protsenko
    • [U-Boot] [PATCH v2 1/4] fastboot: Add CONFIG_FASTBOOT_USB_DEV option   Tom Rini
  • [U-Boot] [PATCH v2 2/4] ti_omap5_common: Respect USB controller number in fastboot   Sam Protsenko
    • [U-Boot] [PATCH v2 2/4] ti_omap5_common: Respect USB controller number in fastboot   Tom Rini
  • [U-Boot] [PATCH v2 3/4] configs: am57xx: Enable download gadget   Sam Protsenko
    • [U-Boot] [PATCH v2 3/4] configs: am57xx: Enable download gadget   Tom Rini
  • [U-Boot] [PATCH v2 4/4] configs: am57xx: Enable fastboot   Sam Protsenko
    • [U-Boot] [PATCH v2 4/4] configs: am57xx: Enable fastboot   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
  • [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] [PATCH] dm: mmc: socfpga: fix MMC_OPS support   Sylvain Lesne
  • [U-Boot] [PATCH] dm: mmc: socfpga: fix MMC_OPS support   Marek Vasut
  • [U-Boot] [PATCH] dm: mmc: socfpga: fix MMC_OPS support   Simon Glass
    • [U-Boot] [PATCH] dm: mmc: socfpga: fix MMC_OPS support   Jaehoon Chung
      • [U-Boot] [PATCH] dm: mmc: socfpga: fix MMC_OPS support   Marek Vasut
    • [U-Boot] [PATCH] dm: mmc: socfpga: fix MMC_OPS support   Sylvain Lesne
• [U-Boot] [PATCH] efi: Use device device path type Messaging for network interface node   Oleksandr Tymoshenko
  • [U-Boot] efi: Use device device path type Messaging for network interface node   Alexander Graf
• [U-Boot] [PATCH 1/2] LS1046AQDS : Add NOR Secure Boot Target   Sumit Garg
• [U-Boot] [PATCH 2/2] LS1046ARDB : Add QSPI Secure Boot target   Sumit Garg
• [U-Boot] [PATCH] drivers/pci/Kconfig: Add PCI   Tom Rini
  • [U-Boot] [PATCH] drivers/pci/Kconfig: Add PCI   Simon Glass
  • [U-Boot] [PATCH] drivers/pci/Kconfig: Add PCI   Stephen Warren
    • [U-Boot] [PATCH] drivers/pci/Kconfig: Add PCI   Tom Rini
    • [U-Boot] [PATCH] drivers/pci/Kconfig: Add PCI   Tom Rini
  • [U-Boot] [PATCH v2] drivers/pci/Kconfig: Add PCI   Tom Rini
    • [U-Boot] [PATCH v2] drivers/pci/Kconfig: Add PCI   Stephen Warren
    • [U-Boot] [U-Boot,v2] drivers/pci/Kconfig: Add PCI   Tom Rini
• [U-Boot] [PATCH v2] powerpc/t2080: CPU erratum A-007907   Darwin Dingel
  • [U-Boot] [PATCH v2] powerpc/t2080: CPU erratum A-007907   york sun
  • [U-Boot] [PATCH v2] powerpc/t2080: CPU erratum A-007907   york sun
  • [U-Boot] [PATCH v2] powerpc/t2080: CPU erratum A-007907   york sun
• [U-Boot] [RFC PATCH v1] mvebu: db-88f6820-amc: Enable FIT support   Chris Packham
• [U-Boot] [PATCH 1/2] travis-ci: set env vars to name jobs   Stephen Warren
  • [U-Boot] [PATCH 1/2] travis-ci: set env vars to name jobs   Tom Rini
    • [U-Boot] [PATCH 1/2] travis-ci: set env vars to name jobs   Stephen Warren
      • [U-Boot] [PATCH 1/2] travis-ci: set env vars to name jobs   Tom Rini
  • [U-Boot] [U-Boot,1/2] travis-ci: set env vars to name jobs   Tom Rini
• [U-Boot] [PATCH 2/2] travis-ci: remove duplicate build   Stephen Warren
  • [U-Boot] [PATCH 2/2] travis-ci: remove duplicate build   Tom Rini
  • [U-Boot] [U-Boot,2/2] travis-ci: remove duplicate build   Tom Rini
• [U-Boot] [RFC PATCH] lib/timer: initialize timebase_l/timebase_h   Andre Przywara
  • [U-Boot] [RFC PATCH] lib/timer: initialize timebase_l/timebase_h   Alexander Graf
    • [U-Boot] [RFC PATCH] lib/timer: initialize timebase_l/timebase_h   André Przywara
      • [U-Boot] [RFC PATCH] lib/timer: initialize timebase_l/timebase_h   Alexander Graf
• [U-Boot] [PATCH v9 14/23] engicam: icorem6: Add DM_GPIO, DM_MMC support   Jagan Teki
  • [U-Boot] [PATCH v9 21/23] imx6: icorem6: Add NAND support   Jagan Teki
    • [U-Boot] [PATCH v9 21/23] imx6: icorem6: Add NAND support   Stefano Babic
      • [U-Boot] [PATCH v9 21/23] imx6: icorem6: Add NAND support   Jagan Teki
      • [U-Boot] [PATCH v9 21/23] imx6: icorem6: Add NAND support   Stefano Babic
      • [U-Boot] [PATCH v9 21/23] imx6: icorem6: Add NAND support   Jagan Teki
      • [U-Boot] [PATCH v9 21/23] imx6: icorem6: Add NAND support   Stefano Babic
• [U-Boot] [PATCH] Add workaround for USB PHY errata   Suresh Gupta
• [U-Boot] [PATCH] armv8: Add workaround for USB erratum A-009008   Suresh Gupta
• [U-Boot] [PATCH] armv8: Add workaround for USB erratum A-009798   Suresh Gupta
• [U-Boot] [PATCH] armv8: Add workaround for USB erratum A-008997   Suresh Gupta
• [U-Boot] [PATCH] armv8: Add workaround for USB erratum A-009007   Suresh Gupta
• [U-Boot] [PATCH] armv7: Add workaround for USB erratum A-009008   Suresh Gupta
• [U-Boot] [PATCH] armv7: Add workaround for USB erratum A-009798   Suresh Gupta
• [U-Boot] [PATCH] armv7: Add workaround for USB erratum A-008997   Suresh Gupta
• [U-Boot] [PATCH] armv7: Add workaround for USB erratum A-009007   Suresh Gupta
• [U-Boot] [PATCH] cmd: load: align cache flush   Chris Packham
  • [U-Boot] [PATCH] cmd: load: align cache flush   Stefan Roese
• [U-Boot] [PATCH] driver: net: ldpaa_eth: Fix missing bracket issue   Priyanka Jain
• [U-Boot] [PATCH] armv8: ls2080a: Update serdes protocol support   Priyanka Jain
• [U-Boot] [PATCH] omap3_beagle: use config_distro_bootcmd   Guillaume GARDET
  • [U-Boot] [PATCH] omap3_beagle: use config_distro_bootcmd   Tom Rini
• [U-Boot] [PATCH 4/6] x86: efi: Add EFI loader support for x86   Alexander Graf
• [U-Boot] [PATCH] arm: mvebu: move SYS_MVEBU_PLL_CLOCK to Kconfig   Chris Packham
• [U-Boot] [RFC PATCH v2 00/10] pxa3xx_nand updates   Chris Packham
  • [U-Boot] [RFC PATCH v2 01/10] mtd: nand: pxa3xx_nand: Increase initial buffer size   Chris Packham
  • [U-Boot] [RFC PATCH v2 02/10] mtd: nand: pxa3xx_nand: use nand_to_mtd()   Chris Packham
  • [U-Boot] [RFC PATCH v2 03/10] mtd: nand: pxa3xx_nand: sync pxa3xx_nand_set_sdr_timing()   Chris Packham
  • [U-Boot] [RFC PATCH v2 04/10] mtd: nand: pxa3xx_nand: fix early spurious interrupt   Chris Packham
  • [U-Boot] [RFC PATCH v2 05/10] mtd: nand: pxa3xx-nand: fix random command timeouts   Chris Packham
  • [U-Boot] [RFC PATCH v2 06/10] nand: pxa3xx: Increase READ_ID buffer and make the size static   Chris Packham
  • [U-Boot] [RFC PATCH v2 07/10] mtd: pxa3xx_nand: Increase the initial chunk size   Chris Packham
  • [U-Boot] [RFC PATCH v2 08/10] mtd: pxa3xx_nand: Fix initial controller configuration   Chris Packham
  • [U-Boot] [RFC PATCH v2 09/10] mtd: pxa3xx_nand: Simplify pxa3xx_nand_scan   Chris Packham
  • [U-Boot] [RFC PATCH v2 10/10] mtd: nand: pxa3xx_nand: add support for partial chunks   Chris Packham
• [U-Boot] [PATCH] armv8: QSPI: Add AHB bus 16MB+ size support   Yuan Yao
• [U-Boot] [PATCH v3 0/2] pinctrl: at91: Add pinctrl driver   Wenyou Yang
  • [U-Boot] [PATCH v3 1/2] gpio: at91_gpio: Remove CPU_HAS_PIO3 macro   Wenyou Yang
  • [U-Boot] [PATCH v3 2/2] pinctrl: at91: Add pinctrl driver   Wenyou Yang
• [U-Boot] [PATCH v1] clk: at91: pmc: add more compatibles   Wenyou Yang
• [U-Boot] [PATCH v1 2/4] spi: fsl_qspi: Add 4bytes address support   Jagan Teki
  • [U-Boot] [PATCH v1 2/4] spi: fsl_qspi: Add 4bytes address support   Yao Yuan
• [U-Boot] [PATCH 1/3] power: regulator: Introduce regulator_set_value_force function   Keerthy
  • [U-Boot] [PATCH 2/3] power: regulator: Add limits checking while setting voltage   Keerthy
    • [U-Boot] [PATCH 2/3] power: regulator: Add limits checking while setting voltage   Simon Glass
  • [U-Boot] [PATCH 3/3] power: regulator: Add limits checking while setting current   Keerthy
    • [U-Boot] [PATCH 3/3] power: regulator: Add limits checking while setting current   Simon Glass
      • [U-Boot] [PATCH 3/3] power: regulator: Add limits checking while setting current   Keerthy
      • [U-Boot] [PATCH 3/3] power: regulator: Add limits checking while setting current   Simon Glass
  • [U-Boot] [PATCH 1/3] power: regulator: Introduce regulator_set_value_force function   Simon Glass
• [U-Boot] [PATCH v1 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D4   Wenyou Yang
  • [U-Boot] [PATCH v1 1/2] ARM: dts: at91: add dts file for sama5d4 Xplained board   Wenyou Yang
  • [U-Boot] [PATCH v1 2/2] ARM: dts: at91: add dts file for sama5d4ek board   Wenyou Yang
• [U-Boot] [PATCH v1 0/8] board: sama5d4: convert boards to support DM/DT   Wenyou Yang
  • [U-Boot] [PATCH v1 1/8] configs: at91-sama5_common: fix for CONFIG_AT91_GPIO   Wenyou Yang
  • [U-Boot] [PATCH v1 2/8] board: sama5d4_xplained: move config options to *_defconfig   Wenyou Yang
  • [U-Boot] [PATCH v1 3/8] board: sama5d4_xplained: clean up code   Wenyou Yang
  • [U-Boot] [PATCH v1 4/8] board: sama5d4_xplained: enable early debug UART   Wenyou Yang
  • [U-Boot] [PATCH v1 5/8] board: sama5d4ek: move config options to *_defconfig   Wenyou Yang
  • [U-Boot] [PATCH v1 6/8] board: sama5d4ek: clean up code   Wenyou Yang
  • [U-Boot] [PATCH v1 7/8] board: sama5d4ek: enable early debug UART   Wenyou Yang
  • [U-Boot] [PATCH v1 8/8] configs: sama5d4: move CONFIG_SYS_NO_FLASH to *defconfig   Wenyou Yang
• [U-Boot] Unable to decompress files greater than 500 MB   Zakir Ahmed
  • [U-Boot] Unable to decompress files greater than 500 MB   Heiko Schocher
    • [U-Boot] Unable to decompress files greater than 500 MB   Zakir Ahmed
• [U-Boot] [PATCH 1/5] ARM64: zynqmp: Adjust to new SMC interface to get silicon version   Michal Simek
  • [U-Boot] [PATCH 2/5] ARM64: zynqmp: Record board name as serial number for DFU/FASTBOOT   Michal Simek
  • [U-Boot] [PATCH 3/5] ARM64: zynqmp: Add support for SD1 with level shifters bootmode   Michal Simek
  • [U-Boot] [PATCH 4/5] ARM64: zynqmp: Fix secondary bootmode enabling   Michal Simek
  • [U-Boot] [PATCH 5/5] ARM64: zynqmp: Ignore warnings from autogenerated files   Michal Simek
• [U-Boot] [PATCH 1/2] ARM: zynq: Add support for Zynq 7000S 7007s/7012s/7014s devices   Michal Simek
  • [U-Boot] [PATCH 2/2] zynq: nand: Runtime detection of nand buswidth through slcr   Michal Simek
• [U-Boot] [PATCH 1/2] net: zynq_gem: Modify the nwcfg bit definitions   Michal Simek
  • [U-Boot] [PATCH 2/2] net: zynq_gem: Correct SGMII enable bit setting   Michal Simek
• [U-Boot] [PATCH] nand: arasan_nfc: Clear ecc on bit while sending read command   Michal Simek
• [U-Boot] [PATCH v3 00/10] sunxi: sun5/7i: add the psci suspend function   Antoine Tenart
  • [U-Boot] [PATCH v3 05/10] exynos: select ARM_GIC for TARGET_ARNDALE   Antoine Tenart
  • [U-Boot] [PATCH v3 06/10] tegra: select ARM_GIC for Tegra TK1s   Antoine Tenart
    • [U-Boot] [PATCH v3 06/10] tegra: select ARM_GIC for Tegra TK1s   Stephen Warren
      • [U-Boot] [PATCH v3 06/10] tegra: select ARM_GIC for Tegra TK1s   Antoine Tenart
      • [U-Boot] [PATCH v3 06/10] tegra: select ARM_GIC for Tegra TK1s   Stephen Warren
      • [U-Boot] [PATCH v3 06/10] tegra: select ARM_GIC for Tegra TK1s   Antoine Tenart
  • [U-Boot] [PATCH v3 08/10] sun5/7i: add an implementation of the psci suspend function   Antoine Tenart
    • [U-Boot] [PATCH v3 08/10] sun5/7i: add an implementation of the psci suspend function   Maxime Ripard
      • [U-Boot] [PATCH v3 08/10] sun5/7i: add an implementation of the psci suspend function   Antoine Tenart
      • [U-Boot] [PATCH v3 08/10] sun5/7i: add an implementation of the psci suspend function   Maxime Ripard
      • [U-Boot] [PATCH v3 08/10] sun5/7i: add an implementation of the psci suspend function   Antoine Tenart
      • [U-Boot] [PATCH v3 08/10] sun5/7i: add an implementation of the psci suspend function   Chen-Yu Tsai
      • [U-Boot] [PATCH v3 08/10] sun5/7i: add an implementation of the psci suspend function   Antoine Tenart
      • [U-Boot] [PATCH v3 08/10] sun5/7i: add an implementation of the psci suspend function   Chen-Yu Tsai
  • [U-Boot] [PATCH v3 09/10] sun5i: add defines used by the PSCI code   Antoine Tenart
    • [U-Boot] [PATCH v3 09/10] sun5i: add defines used by the PSCI code   Maxime Ripard
      • [U-Boot] [PATCH v3 09/10] sun5i: add defines used by the PSCI code   Antoine Tenart
• [U-Boot] [PATCH v3 01/10] arm: add atomic functions with return support   Antoine Tenart
  • [U-Boot] [PATCH v3 01/10] arm: add atomic functions with return support   Mark Rutland
    • [U-Boot] [PATCH v3 01/10] arm: add atomic functions with return support   Antoine Tenart
• [U-Boot] [PATCH v3 02/10] ARM: add the ARM_GIC configuration option   Antoine Tenart
• [U-Boot] [PATCH v3 03/10] sunxi: select ARM_GIC for sun[6789]i   Antoine Tenart
• [U-Boot] [PATCH v3 04/10] ARM: select ARM_GIC for SoCs having a psci implementation   Antoine Tenart
• [U-Boot] [PATCH v3 07/10] ARM: PSCI: protect GIC specific code with ARM_GIC   Antoine Tenart
• [U-Boot] [PATCH v3 10/10] sun5i: boot in non-secure mode by default   Antoine Tenart
• [U-Boot] [PATCH] armv8: fsl-layerscape: Add DPAA1 QBMan support   Roy Pledge
• [U-Boot] [PATCH] fsl_qman: Implement device tree fixup for QBMan on ARM processors   Roy Pledge
  • [U-Boot] [PATCH] fsl_qman: Implement device tree fixup for QBMan on ARM processors   Scott Wood
• [U-Boot] [PATCH] cmd/fdt: Make fdt get value endian-safe for single-cell properties   Andreas Färber
  • [U-Boot] [PATCH] cmd/fdt: Make fdt get value endian-safe for single-cell properties   Simon Glass
    • [U-Boot] [PATCH] cmd/fdt: Make fdt get value endian-safe for single-cell properties   Andreas Färber
      • [U-Boot] [PATCH] cmd/fdt: Make fdt get value endian-safe for single-cell properties   Simon Glass
• [U-Boot] [PATCH] MAINTAINERS: Fix syntax and update filename for FDT   Andreas Färber
  • [U-Boot] [PATCH] MAINTAINERS: Fix syntax and update filename for FDT   Simon Glass
• [U-Boot] [PATCH 1/6] travis-ci: Use = not : when writing ~/.buildman   Stephen Warren
  • [U-Boot] [PATCH 2/6] travis-ci: use correct exit code on errors   Stephen Warren
    • [U-Boot] [PATCH 2/6] travis-ci: use correct exit code on errors   Heiko Schocher
    • [U-Boot] [U-Boot, 2/6] travis-ci: use correct exit code on errors   Tom Rini
  • [U-Boot] [PATCH 3/6] travis-ci: centralize ~/.buildman editing   Stephen Warren
    • [U-Boot] [PATCH 3/6] travis-ci: centralize ~/.buildman editing   Heiko Schocher
    • [U-Boot] [U-Boot, 3/6] travis-ci: centralize ~/.buildman editing   Tom Rini
  • [U-Boot] [PATCH 4/6] travis-ci: use buildman -P everywhere   Stephen Warren
    • [U-Boot] [PATCH 4/6] travis-ci: use buildman -P everywhere   Heiko Schocher
    • [U-Boot] [U-Boot,4/6] travis-ci: use buildman -P everywhere   Tom Rini
  • [U-Boot] [PATCH 5/6] travis-ci: don't invoke exit on success   Stephen Warren
    • [U-Boot] [PATCH 5/6] travis-ci: don't invoke exit on success   Heiko Schocher
    • [U-Boot] [U-Boot,5/6] travis-ci: don't invoke exit on success   Tom Rini
  • [U-Boot] [PATCH 6/6] travis-ci: compile with buildman when running test/py   Stephen Warren
    • [U-Boot] [PATCH 6/6] travis-ci: compile with buildman when running test/py   Stephen Warren
    • [U-Boot] [PATCH 6/6] travis-ci: compile with buildman when running test/py   Tom Rini
      • [U-Boot] [PATCH 6/6] travis-ci: compile with buildman when running test/py   Stephen Warren
    • [U-Boot] [PATCH 6/6] travis-ci: compile with buildman when running test/py   Heiko Schocher
    • [U-Boot] [U-Boot, 6/6] travis-ci: compile with buildman when running test/py   Tom Rini
  • [U-Boot] [PATCH 1/6] travis-ci: Use = not : when writing ~/.buildman   Heiko Schocher
  • [U-Boot] [U-Boot, 1/6] travis-ci: Use = not : when writing ~/.buildman   Tom Rini
• [U-Boot] [PATCH 2/2] armv8: ls1046aqds: add lpuart support   york sun
  • [U-Boot] [PATCH 2/2] armv8: ls1046aqds: add lpuart support   S.H. Xie
• [U-Boot] [PATCH v3 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings   york sun
• [U-Boot] [PATCH] travis-ci: build Tegra boards   Stephen Warren
  • [U-Boot] [PATCH] travis-ci: build Tegra boards   Tom Rini
  • [U-Boot] [PATCH] travis-ci: build Tegra boards   Heiko Schocher
  • [U-Boot] travis-ci: build Tegra boards   Tom Rini
• [U-Boot] [PATCH 1/2] mkimage: Fix missing free() in show_valid_options()   Simon Glass
  • [U-Boot] [PATCH 1/2] mkimage: Fix missing free() in show_valid_options()   Tom Rini
• [U-Boot] [PATCH 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
  • [U-Boot] [PATCH 2/2] image: Protect against overflow in unknown_msg()   Tom Rini
    • [U-Boot] [PATCH 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
• [U-Boot] [PATCH v2 0/3] LS1046A secure boot target addition   Sumit Garg
  • [U-Boot] [PATCH v2 0/3] LS1046A secure boot target addition   Andreas Färber
  • [U-Boot] [PATCH v2 1/3] SECURE_BOOT: Enable chain of trust on LS1046A platform   Sumit Garg
  • [U-Boot] [PATCH v2 2/3] LS1046AQDS: Add NOR Secure Boot Target   Sumit Garg
  • [U-Boot] [PATCH v2 3/3] LS1046ARDB: Add QSPI Secure Boot target   Sumit Garg
• [U-Boot] [PATCH] nand: force BBT scan for controllers which need it   Stefan Agner
• [U-Boot] [PATCH v3] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree   Sriram Dash
  • [U-Boot] [PATCH v3] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree   Marek Vasut
    • [U-Boot] [PATCH v3] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree   Brüns, Stefan
• [U-Boot] [PATCH] cmd: pci: add option to parse and display BAR information   yehuday at marvell.com
  • [U-Boot] [PATCH] cmd: pci: add option to parse and display BAR information   Stefan Roese
• [U-Boot] [PATCH v5 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node   Wenbin song
  • [U-Boot] [PATCH v5 2/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node   Wenbin song
  • [U-Boot] [PATCH v5 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node   york sun
    • [U-Boot] [PATCH v5 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node   Wenbin Song
      • [U-Boot] [PATCH v5 1/2] armv8/fsl-layerscape: fdt: fixup LS1043A rev1 GIC node   york sun
• [U-Boot] FSL PowerPC platform: Not able to boot Linux with ramdisk size > 100MB   Prabhakar Kushwaha
  • [U-Boot] FSL PowerPC platform: Not able to boot Linux with ramdisk size > 100MB   Scott Wood
    • [U-Boot] FSL PowerPC platform: Not able to boot Linux with ramdisk size > 100MB   Prabhakar Kushwaha
    • [U-Boot] FSL PowerPC platform: Not able to boot Linux with ramdisk size > 100MB   york sun
      • [U-Boot] FSL PowerPC platform: Not able to boot Linux with ramdisk size > 100MB   Masahiro Yamada
• [U-Boot] [PATCH] axs10x: Introduce UART clk device   Vlad Zakharov
• [U-Boot] u-boot on qemu vexpress-a9   Nicolae Rosia
  • [U-Boot] u-boot on qemu vexpress-a9   Nicolae Rosia
• [U-Boot] [PATCH 00/11] ARM: uniphier: UniPhier SoC code updates   Masahiro Yamada
  • [U-Boot] [PATCH 07/11] ARM: uniphier: do not run harmful code for USB boot mode of LD11 ES3   Masahiro Yamada
  • [U-Boot] [PATCH 08/11] ARM: uniphier: rework existing DDR PHY code to reuse for LD11 SoC   Masahiro Yamada
  • [U-Boot] [PATCH 09/11] ARM: uniphier: refactor DDR PHY parameter dump command   Masahiro Yamada
  • [U-Boot] [PATCH 10/11] ARM: uniphier: support DDR PHY parameter dump command for LD11   Masahiro Yamada
  • [U-Boot] [PATCH 11/11] ARM: uniphier: update DRAM init code for LD11 SoC   Masahiro Yamada
  • [U-Boot] [PATCH 00/11] ARM: uniphier: UniPhier SoC code updates   Masahiro Yamada
• [U-Boot] [PATCH 01/11] ARM: uniphier: enable SSC for more PLLs for LD20 SoC   Masahiro Yamada
• [U-Boot] [PATCH 02/11] ARM: uniphier: remove unused board attribute macros   Masahiro Yamada
• [U-Boot] [PATCH 03/11] ARM: uniphier: update DRAM init code for LD20 SoC (3rd)   Masahiro Yamada
• [U-Boot] [PATCH 04/11] ARM: uniphier: rename ddrphy-ld20-regs.h to ddruqphy-regs.h   Masahiro Yamada
• [U-Boot] [PATCH 05/11] ARM: uniphier: fix DRAM init poll address for LD4, Pro4, sLD8   Masahiro Yamada
• [U-Boot] [PATCH 06/11] ARM: uniphier: enable clocks to MIO/STDMAC on LD11 if USB is enabled   Masahiro Yamada
• [U-Boot] [PATCH v2] efi_loader: console: Correctly report modes   Emmanuel Vadot
  • [U-Boot] [PATCH v2] efi_loader: console: Correctly report modes   Alexander Graf
• [U-Boot] [PATCH 0/3] spl: Convert MMC raw mode sector options to Kconfig   Sam Protsenko
  • [U-Boot] [PATCH 1/3] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig   Sam Protsenko
    • [U-Boot] [PATCH 1/3] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig   Tom Rini
  • [U-Boot] [PATCH 2/3] spl: Do not define U-Boot address on MMC if SPL is not defined   Sam Protsenko
    • [U-Boot] [PATCH 2/3] spl: Do not define U-Boot address on MMC if SPL is not defined   Tom Rini
  • [U-Boot] [PATCH 3/3] spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS   Sam Protsenko
    • [U-Boot] [PATCH 3/3] spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS   Tom Rini
• [U-Boot] [PATCH 1/3] arm: am57xx: Define Android partition table   Sam Protsenko
  • [U-Boot] [PATCH 1/3] arm: am57xx: Define Android partition table   Tom Rini
• [U-Boot] [PATCH 2/3] arm: am57xx: Enable 8-bit eMMC access   Sam Protsenko
  • [U-Boot] [PATCH 2/3] arm: am57xx: Enable 8-bit eMMC access   Tom Rini
• [U-Boot] [PATCH 3/3] arm: dra7xx: Unify Android partition table   Sam Protsenko
  • [U-Boot] [PATCH 3/3] arm: dra7xx: Unify Android partition table   Tom Rini
• [U-Boot] [PATCH V2] mmc: Tinification of the mmc code   Simon Glass
  • [U-Boot] [PATCH V2] mmc: Tinification of the mmc code   Marek Vasut
    • [U-Boot] [PATCH V2] mmc: Tinification of the mmc code   Simon Glass
      • [U-Boot] [PATCH V2] mmc: Tinification of the mmc code   Marek Vasut
• [U-Boot] [PATCH v2 1/2] mkimage: Fix missing free() in show_valid_options()   Simon Glass
• [U-Boot] [PATCH v2 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
  • [U-Boot] [PATCH v2 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
    • [U-Boot] [PATCH v2 2/2] image: Protect against overflow in unknown_msg()   Siarhei Siamashka
      • [U-Boot] [PATCH v2 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
• [U-Boot] [PATCH 0/4] cleanup and enhancements for Colibri VFxx   Stefan Agner
  • [U-Boot] [PATCH 1/4] toradex: allow custom fdt board setup in board file   Stefan Agner
  • [U-Boot] [PATCH 2/4] colibri_vf: use device-tree for MTD partitions   Stefan Agner
  • [U-Boot] [PATCH 3/4] colibri_vf: cleanup USB clock initialization   Stefan Agner
  • [U-Boot] [PATCH 4/4] colibri_vf: use same NAND clock as Linux uses   Stefan Agner
• [U-Boot] [PATCH v3 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
  • [U-Boot] [PATCH v3 2/2] image: Protect against overflow in unknown_msg()   Tom Rini
    • [U-Boot] [PATCH v3 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
      • [U-Boot] [PATCH v3 2/2] image: Protect against overflow in unknown_msg()   Tom Rini
      • [U-Boot] [PATCH v3 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
• [U-Boot] Please pull u-boot-mmc master   Jaehoon Chung
  • [U-Boot] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] [PATCH v2 0/3] gpio: at91_gpio: Add option and clock support   Wenyou Yang
  • [U-Boot] [PATCH v2 1/3] gpio: Kconfig: Add CONFIG_AT91_GPIO option   Wenyou Yang
  • [U-Boot] [PATCH v2 2/3] gpio: at91_gpio: Add the device tree support   Wenyou Yang
  • [U-Boot] [PATCH v2 3/3] gpio: at91_gpio: Add the clock support   Wenyou Yang
• [U-Boot] [PATCH v11] dm: at91: Add driver model support for the spi driver   Wenyou Yang
  • [U-Boot] [U-Boot, v11] dm: at91: Add driver model support for the spi driver   Andreas Bießmann
    • [U-Boot] [U-Boot, v11] dm: at91: Add driver model support for the spi driver   Jagan Teki
      • [U-Boot] [U-Boot, v11] dm: at91: Add driver model support for the spi driver   Andreas Bießmann
• [U-Boot] [PATCH 1/2][v2] lpuart: add a get_lpuart_clk function   shh.xie at gmail.com
• [U-Boot] [PATCH 2/2][v2] armv8: ls1046aqds: add lpuart support   shh.xie at gmail.com
• [U-Boot] [PATCH 1/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Keerthy
  • [U-Boot] [PATCH 2/2] arm: cpu: armv7: omap-common: Clear XN bit in the ARMV7_DCACHE_POLICY   Keerthy
    • [U-Boot] [PATCH 2/2] arm: cpu: armv7: omap-common: Clear XN bit in the ARMV7_DCACHE_POLICY   Alexander Graf
      • [U-Boot] [PATCH 2/2] arm: cpu: armv7: omap-common: Clear XN bit in the ARMV7_DCACHE_POLICY   Keerthy
    • [U-Boot] [PATCH 2/2] arm: cpu: armv7: omap-common: Clear XN bit in the ARMV7_DCACHE_POLICY   Tom Rini
  • [U-Boot] [PATCH 1/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Alexander Graf
  • [U-Boot] [PATCH 1/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Tom Rini
    • [U-Boot] [PATCH 1/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Keerthy
• [U-Boot] [PATCH v2 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D4   Wenyou Yang
  • [U-Boot] [PATCH v2 1/2] ARM: dts: at91: add dts files for sama5d4 Xplained   Wenyou Yang
  • [U-Boot] [PATCH v2 2/2] ARM: dts: at91: add dts file for sama5d4ek   Wenyou Yang
• [U-Boot] [PATCH v1 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D3   Wenyou Yang
  • [U-Boot] [PATCH v1 1/2] ARM: at91: dt: add dts files for sama5d3ek board   Wenyou Yang
  • [U-Boot] [PATCH v1 2/2] ARM: at91: dt: add dts file for sama5d3 Xplained   Wenyou Yang
• [U-Boot] [PATCH v2 0/8] board: sama5d4: convert boards to support DM/DT   Wenyou Yang
  • [U-Boot] [PATCH v2 1/8] configs: at91-sama5_common: fix for CONFIG_AT91_GPIO   Wenyou Yang
  • [U-Boot] [PATCH v2 2/8] board: sama5d4_xplained: move config options to defconfig   Wenyou Yang
  • [U-Boot] [PATCH v2 3/8] board: sama5d4_xplained: clean up code   Wenyou Yang
  • [U-Boot] [PATCH v2 4/8] board: sama5d4_xplained: enable early debug UART   Wenyou Yang
  • [U-Boot] [PATCH v2 5/8] board: sama5d4ek: move config options to defconfig   Wenyou Yang
  • [U-Boot] [PATCH v2 6/8] board: sama5d4ek: clean up code   Wenyou Yang
  • [U-Boot] [PATCH v2 7/8] board: sama5d4ek: enable early debug UART   Wenyou Yang
  • [U-Boot] [PATCH v2 8/8] configs: sama5d4: move CONFIG_SYS_NO_FLASH to *defconfig   Wenyou Yang
• [U-Boot] [PATCH v1 0/7] board: sama5d3: convert boards to support DM/DT   Wenyou Yang
  • [U-Boot] [PATCH v1 1/7] board: sama5d3xek: move config options to defconfig   Wenyou Yang
  • [U-Boot] [PATCH v1 2/7] board: sama5d3xek: clean up code   Wenyou Yang
  • [U-Boot] [PATCH v1 3/7] board: sama5d3xek: enable early debug UART   Wenyou Yang
  • [U-Boot] [PATCH v1 4/7] board: sama5d3_xplained: move config options to defconfig   Wenyou Yang
  • [U-Boot] [PATCH v1 5/7] board: sama5d3_xplained: clean up code   Wenyou Yang
  • [U-Boot] [PATCH v1 6/7] board: sama5d3_xplained: enable early debug UART   Wenyou Yang
  • [U-Boot] [PATCH v1 7/7] configs: sama5d3_xplained: move CONFIG_SYS_NO_FLASH to defconfig   Wenyou Yang
• [U-Boot] [PATCH v1] dfu: align array in dfu_get_dev_type with enum dfu_device_type   Patrick Delaunay
• [U-Boot] [PATCH v3] efi_loader: console: Correctly report modes   Emmanuel Vadot
  • [U-Boot] [PATCH v3] efi_loader: console: Correctly report modes   Alexander Graf
    • [U-Boot] [PATCH v3] efi_loader: console: Correctly report modes   Emmanuel Vadot
• [U-Boot] [U-Boot, 2/6] ARM: at91: clock: correct PRES offset for at91sam9x5   Andreas Bießmann
  • [U-Boot] [U-Boot, 2/6] ARM: at91: clock: correct PRES offset for at91sam9x5   Andreas Bießmann
• [U-Boot] [PATCH 00/11] sunxi: Add full SPL support for sun9i (A80)   Chen-Yu Tsai
  • [U-Boot] [PATCH 00/11] sunxi: Add full SPL support for sun9i (A80)   Hans de Goede
    • [U-Boot] [PATCH 00/11] sunxi: Add full SPL support for sun9i (A80)   Chen-Yu Tsai
      • [U-Boot] [PATCH 00/11] sunxi: Add full SPL support for sun9i (A80)   Hans de Goede
    • [U-Boot] [PATCH 00/11] sunxi: Add full SPL support for sun9i (A80)   Hans de Goede
      • [U-Boot] [linux-sunxi] Re: [PATCH 00/11] sunxi: Add full SPL support for sun9i (A80)   Chen-Yu Tsai
      • [U-Boot] [linux-sunxi] Re: [PATCH 00/11] sunxi: Add full SPL support for sun9i (A80)   Hans de Goede
• [U-Boot] [PATCH 01/11] sunxi: DRAM initialisation for sun9i   Chen-Yu Tsai
  • [U-Boot] [PATCH 01/11] sunxi: DRAM initialisation for sun9i   Jagan Teki
    • [U-Boot] [PATCH 01/11] sunxi: DRAM initialisation for sun9i   Hans de Goede
      • [U-Boot] [PATCH 01/11] sunxi: DRAM initialisation for sun9i   Chen-Yu Tsai
• [U-Boot] [PATCH 02/11] sunxi: add gtbus-initialisation for sun9i   Chen-Yu Tsai
  • [U-Boot] [PATCH 02/11] sunxi: add gtbus-initialisation for sun9i   Jagan Teki
    • [U-Boot] [PATCH 02/11] sunxi: add gtbus-initialisation for sun9i   Chen-Yu Tsai
      • [U-Boot] [PATCH 02/11] sunxi: add gtbus-initialisation for sun9i   Hans de Goede
• [U-Boot] [PATCH 03/11] sunxi: Enable SMP mode for the boot CPU on sun9i (A80)   Chen-Yu Tsai
• [U-Boot] [PATCH 04/11] sunxi: add initial clock setup for sun9i for SPL   Chen-Yu Tsai
• [U-Boot] [PATCH 05/11] sunxi: enable SPL for sun9i   Chen-Yu Tsai
• [U-Boot] [PATCH 06/11] sunxi: add MMC pinmux setup for SDC2 on sun9i   Chen-Yu Tsai
• [U-Boot] [PATCH 07/11] sunxi: Set default CPU clock rate to 1008 MHz for sun9i (A80)   Chen-Yu Tsai
• [U-Boot] [PATCH 08/11] sunxi: Add support for SID e-fuses on sun9i   Chen-Yu Tsai
• [U-Boot] [PATCH 09/11] sunxi: Add default zq value for sun9i (A80)   Chen-Yu Tsai
• [U-Boot] [PATCH 10/11] sunxi: Add support for A80 Optimus board   Chen-Yu Tsai
• [U-Boot] [PATCH 11/11] sunxi: Add support for Cubieboard4   Chen-Yu Tsai
• [U-Boot] [U-Boot, v3, 6/7] usb: ehci-atmel: Remove unnecessary clock calling   Andreas Bießmann
  • [U-Boot] [U-Boot, v3, 6/7] usb: ehci-atmel: Remove unnecessary clock calling   Andreas Bießmann
• [U-Boot] [PATCH v2 0/7] imx6: icorem6: Add framebuffer and I2C support   Jagan Teki
  • [U-Boot] [PATCH v2 1/7] video: Kconfig: Add VIDEO_IPV3 entry   Jagan Teki
  • [U-Boot] [PATCH v2 2/7] imx6: icorem6: Add framebuffer support   Jagan Teki
  • [U-Boot] [PATCH v2 3/7] imx6: icorem6: Add custom splashscreen support   Jagan Teki
  • [U-Boot] [PATCH v2 4/7] i2c: Kconfig: Add SYS_I2C_MXC entry   Jagan Teki
  • [U-Boot] [PATCH v2 5/7] i2c: mxc: Print hex instead of decimal for bus address   Jagan Teki
  • [U-Boot] [PATCH v2 6/7] i2c: mxc: Make 'no gpio pinctrl state' print as debug   Jagan Teki
  • [U-Boot] [PATCH v2 7/7] imx6: icorem6: Add I2C support   Jagan Teki
• [U-Boot] [PATCH v4] efi_loader: console: Correctly report modes   Emmanuel Vadot
  • [U-Boot] [PATCH v4] efi_loader: console: Correctly report modes   Alexander Graf
• [U-Boot] [PATCH 01/13] imx: mx6sl: ddr: add IOM_GRP registers   Eric Nelson
• [U-Boot] [U-Boot, 1/6] arm: at91: mpddrc: add missing MPDDRC_MD defines   Andreas Bießmann
• [U-Boot] [U-Boot,3/6] arm, at91: add icache support   Andreas Bießmann
• [U-Boot] [U-Boot, v2] clk: at91: Fix at91-pmc and at91-sckc's class ID   Andreas Bießmann
• [U-Boot] [U-Boot, v1] ARM: at91/dt: sama5d2: Fix the warning from dtc   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 1/7] clk: clk-uclass: Assign clk->dev before call .of_xlate   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 2/7] clk: at91: Improve the clock implementation   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 3/7] gpio: atmel_pio4: Remove unnecessary clock calling   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 4/7] i2c: at91_i2c: Remove unnecessary clock calling   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 5/7] i2c: at91_i2c: Change error return -ENODEV to -EINVAL   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 7/7] mmc: atmel_sdhci: Remove unnecessary clock calling   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Andreas Bießmann
  • [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Tom Rini
• [U-Boot] [PATCH] imx: mx6: ddr: add register MPZQLP2CTL for LPDDR2   Eric Nelson
• [U-Boot] [PATCH] MAINTAINERS: Update Jagan's email   Jagan Teki
  • [U-Boot] [PATCH] MAINTAINERS: Update Jagan's email   Jagan Teki
  • [U-Boot] MAINTAINERS: Update Jagan's email   Tom Rini
• [U-Boot] [PATCH 0/4] serial: pxa: kconfig and optional driver model integration   Marcel Ziswiler
• [U-Boot] [PATCH 1/4] serial: pxa: use kconfig for serial configuration   Marcel Ziswiler
• [U-Boot] [PATCH 2/4] serial: pxa: integrate optional driver model handling   Marcel Ziswiler
  • [U-Boot] [PATCH 2/4] serial: pxa: integrate optional driver model handling   Marek Vasut
• [U-Boot] [PATCH 3/4] colibri_pxa270: drop lzma support for space reason   Marcel Ziswiler
• [U-Boot] [PATCH 4/4] colibri_pxa270: transition to driver model for serial   Marcel Ziswiler
• [U-Boot] [PATCH] cmd: crosec: Move crosec_decode_region helper to cmd/cros_ec.c   Moritz Fischer
• [U-Boot] Patchwork breaks commit log format ?   Masahiro Yamada
• [U-Boot] [PATCH v2 1/2] arm: print the cache config option in hex instead of decimal   Keerthy
  • [U-Boot] [PATCH v2 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Keerthy
    • [U-Boot] [PATCH v2 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Tom Rini
      • [U-Boot] [PATCH v2 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Marek Vasut
      • [U-Boot] [PATCH v2 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Tom Rini
      • [U-Boot] [PATCH v2 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Marek Vasut
      • [U-Boot] [PATCH v2 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Keerthy
      • [U-Boot] [PATCH v2 2/2] arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode   Marek Vasut
  • [U-Boot] [PATCH v2 1/2] arm: print the cache config option in hex instead of decimal   Tom Rini
• [U-Boot] [PATCH] tools: add mksunxiboot to tools-all target   Stefan Brüns
  • [U-Boot] [PATCH] tools: add mksunxiboot to tools-all target   Hans de Goede
• [U-Boot] [PATCH] configs/chromebox_panther_defconfig: Re-enable CONFIG_DM_PCI   Tom Rini
  • [U-Boot] [PATCH] configs/chromebox_panther_defconfig: Re-enable CONFIG_DM_PCI   Tom Rini
• [U-Boot] OMAP3630 Falcon Mode Questions   Adam Ford
  • [U-Boot] OMAP3630 Falcon Mode Questions   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PATCH] MAINTAINERS: SUNXI: Add Jagan as Co-Maintainer   Jagan Teki
  • [U-Boot] [PATCH] MAINTAINERS: SUNXI: Add Jagan as Co-Maintainer   Hans de Goede
    • [U-Boot] [PATCH] MAINTAINERS: SUNXI: Add Jagan as Co-Maintainer   Jagan Teki
• [U-Boot] [PATCH] engicam: icorem6: Fix config files   Jagan Teki
• [U-Boot] [PATCH] travis.yml: Add in uniphier as a job, modify aarch64 builds a bit   Tom Rini
• [U-Boot] Please pull u-boot-sunxi sun9i-a80-spl   Hans de Goede
  • [U-Boot] Please pull u-boot-sunxi sun9i-a80-spl   Tom Rini
• [U-Boot] [PATCH] README: fix typo candiate -> candidate   Jelle van der Waa
• [U-Boot] [PATCH 0/3] mx6: ddr: updates for dynamic DDR calibration   Eric Nelson
  • [U-Boot] [PATCH 2/3] mx6: ddr: pass mx6_ddr_sysinfo to calibration routines   Eric Nelson
    • [U-Boot] [PATCH 2/3] mx6: ddr: pass mx6_ddr_sysinfo to calibration routines   Marek Vasut
  • [U-Boot] [PATCH 3/3] mx6: ddr: add routine to return DDR calibration data   Eric Nelson
    • [U-Boot] [PATCH 3/3] mx6: ddr: add routine to return DDR calibration data   Marek Vasut
      • [U-Boot] [PATCH 3/3] mx6: ddr: add routine to return DDR calibration data   Eric Nelson
      • [U-Boot] [PATCH 3/3] mx6: ddr: add routine to return DDR calibration data   Marek Vasut
    • [U-Boot] [PATCH] ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines   Eric Nelson
      • [U-Boot] [PATCH] ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines   Marek Vasut
      • [U-Boot] [PATCH] ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines   Eric Nelson
      • [U-Boot] [PATCH V2 0/4] mx6: ddr: updates for dynamic DDR calibration   Eric Nelson
      • [U-Boot] [PATCH V2 2/4] mx6: ddr: pass mx6_ddr_sysinfo to calibration routines   Eric Nelson
      • [U-Boot] [PATCH V2 3/4] mx6: ddr: add routine to return DDR calibration data   Eric Nelson
      • [U-Boot] [PATCH V2 4/4] ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines   Eric Nelson
      • [U-Boot] [PATCH V2 1/4] mx6: ddr: allow 32 cycles for DQS gating calibration   Eric Nelson
• [U-Boot] [PATCH 1/3] mx6: ddr: allow 32 cycles for DQS gating calibration   Eric Nelson
  • [U-Boot] [PATCH 1/3] mx6: ddr: allow 32 cycles for DQS gating calibration   Marek Vasut
• [U-Boot] [PATCH v5 00/21] sf: Updates on flash detection   Jagan Teki
  • [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux   Jagan Teki
    • [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux   Vignesh R
      • [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux   Jagan Teki
      • [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux   Jagan Teki
      • [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux   Vignesh R
      • [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux   Jagan Teki
      • [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux   Vignesh R
      • [U-Boot] [PATCH v5 01/21] sf: Adopt flash table INFO macro from Linux   Jagan Teki
  • [U-Boot] [PATCH v5 02/21] sf: Simplify lock ops detection code   Jagan Teki
  • [U-Boot] [PATCH v5 03/21] sf: sandbox: Use JEDEC_MFR|ID in id exctract   Jagan Teki
  • [U-Boot] [PATCH v5 04/21] sf: Cleanup spi_flash_info{}   Jagan Teki
  • [U-Boot] [PATCH v5 05/21] sf: Cleanup sf_params   Jagan Teki
  • [U-Boot] [PATCH v5 06/21] sf: nr_sectors -> n_sectors   Jagan Teki
  • [U-Boot] [PATCH v5 07/21] sf: Add SPI_FLASH_MAX_ID_LEN   Jagan Teki
  • [U-Boot] [PATCH v5 08/21] sf: Increase max id length by 1 byte   Jagan Teki
  • [U-Boot] [PATCH v5 09/21] sf: Add INFO6 flash_info macro   Jagan Teki
  • [U-Boot] [PATCH v5 10/21] sf: params: Add S25FS256S_64K spi flash support   Jagan Teki
  • [U-Boot] [PATCH v5 11/21] sf: Remove legacy idcode detection code   Jagan Teki
  • [U-Boot] [PATCH v5 12/21] sf: Remove non-meaningful comments   Jagan Teki
  • [U-Boot] [PATCH v5 13/21] sf: Rename sf_params.c to spi_flash_ids   Jagan Teki
  • [U-Boot] [PATCH v5 14/21] sf: ids: Use small letter's with flash name   Jagan Teki
  • [U-Boot] [PATCH v5 15/21] sf: ids: Use small letter in ext_jedec   Jagan Teki
  • [U-Boot] [PATCH v5 16/21] sf: Rename few local functions   Jagan Teki
  • [U-Boot] [PATCH v5 17/21] spi: Remove dual flash code   Jagan Teki
  • [U-Boot] [PATCH v5 18/21] sf: dataflash: Remove unneeded spi data   Jagan Teki
  • [U-Boot] [PATCH v5 19/21] sf: dataflash: Move flash id detection into jedec_probe   Jagan Teki
  • [U-Boot] [PATCH v5 20/21] sf: dataflash: Fix add_dataflash return logic   Jagan Teki
  • [U-Boot] [PATCH v5 21/21] sf: dataflash: Minor cleanups   Jagan Teki
• [U-Boot] [PATCH v9 00/21] dm: Generic MTD Subsystem/SPI-NOR   Jagan Teki
  • [U-Boot] [PATCH v9 01/21] dm: mtd: Add dm mtd core ops   Jagan Teki
  • [U-Boot] [PATCH v9 02/21] mtd: Add SPI-NOR core support   Jagan Teki
    • [U-Boot] [PATCH v9 02/21] mtd: Add SPI-NOR core support   Jagan Teki
  • [U-Boot] [PATCH v9 03/21] mtd: spi-nor: Kconfig: Add MTD_SPI_NOR entry   Jagan Teki
  • [U-Boot] [PATCH v9 04/21] mtd: spi-nor: Kconfig: Add MTD_SPI_NOR_USE_4K_SECTORS   Jagan Teki
  • [U-Boot] [PATCH v9 05/21] mtd: spi-nor: Kconfig: Add SPI_NOR_MISC entry   Jagan Teki
  • [U-Boot] [PATCH v9 06/21] mtd: spi-nor: Kconfig: Add SPI_NOR_MACRONIX entry   Jagan Teki
  • [U-Boot] [PATCH v9 07/21] mtd: spi-nor: Kconfig: Add SPI_NOR_SPANSION entry   Jagan Teki
  • [U-Boot] [PATCH v9 08/21] mtd: spi-nor: Kconfig: Add SPI_NOR_STMICRO entry   Jagan Teki
  • [U-Boot] [PATCH v9 09/21] mtd: spi-nor: Kconfig: Add SPI_NOR_SST entry   Jagan Teki
  • [U-Boot] [PATCH v9 10/21] mtd: spi-nor: Kconfig: Add SPI_NOR_WINBOND entry   Jagan Teki
  • [U-Boot] [PATCH v9 11/21] spi: Add spi_write_then_read   Jagan Teki
  • [U-Boot] [PATCH v9 12/21] mtd: spi-nor: Add m25p80 driver   Jagan Teki
  • [U-Boot] [PATCH v9 13/21] mtd: spi-nor: Kconfig: Add MTD_M25P80 entry   Jagan Teki
  • [U-Boot] [PATCH v9 14/21] mtd: spi-nor: Add zynq qspinor driver   Jagan Teki
  • [U-Boot] [PATCH v9 15/21] mtd: spi-nor: zynq_qspi: Kconfig: Add MTD_ZYNQ   Jagan Teki
  • [U-Boot] [PATCH v9 16/21] mtd: spi-nor: Add 4-byte addresswidth support   Jagan Teki
  • [U-Boot] [PATCH v9 17/21] dm: mtd: Add uclass_driver.flags   Jagan Teki
  • [U-Boot] [PATCH v9 18/21] dm: mtd: Add post_bind   Jagan Teki
  • [U-Boot] [PATCH v9 19/21] cmd: Add mtd command support   Jagan Teki
  • [U-Boot] [PATCH v9 20/21] arm: dts: zynq: Add zynq-qspinor node   Jagan Teki
  • [U-Boot] [PATCH v9 21/21] dm: zynq: microzed: Enable MTD/SPI-NOR   Jagan Teki
• [U-Boot] [Resend PATCH] tools: imximage: use 'new style' header length for imximage v1   Martin Kaiser
  • [U-Boot] [Resend PATCH] tools: imximage: use 'new style' header length for imximage v1   Martin Kaiser
• [U-Boot] [PATCH] fsl: serdes: fix a deadloop issue for P4080   Zhiqiang Hou
• [U-Boot] [PATCH v2 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D3   Wenyou Yang
  • [U-Boot] [PATCH v2 1/2] ARM: at91: dt: add dts files for sama5d3ek board   Wenyou Yang
  • [U-Boot] [PATCH v2 2/2] ARM: at91: dt: add dts file for sama5d3 Xplained   Wenyou Yang
• [U-Boot] [RESEND PATCH v2 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D3   Wenyou Yang
  • [U-Boot] [RESEND PATCH v2 1/2] ARM: at91: dt: add dts files for sama5d3ek board   Wenyou Yang
  • [U-Boot] [RESEND PATCH v2 2/2] ARM: at91: dt: add dts file for sama5d3 Xplained   Wenyou Yang
• [U-Boot] [PATCH RESEND v2 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node   Vignesh R
  • [U-Boot] [PATCH RESEND v2 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node   Tom Rini
    • [U-Boot] [PATCH RESEND v2 1/2] ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node   R, Vignesh
• [U-Boot] [PATCH RESEND v2 2/2] spi: ti_qspi: Fix baudrate divider calculation   Vignesh R
  • [U-Boot] [PATCH RESEND v2 2/2] spi: ti_qspi: Fix baudrate divider calculation   Jagan Teki
• [U-Boot] [PATCH v3 0/2] ARM: dts: at91: add dts files for the boards of SAMA5D4   Wenyou Yang
  • [U-Boot] [PATCH v3 1/2] ARM: dts: at91: add dts files for sama5d4 Xplained   Wenyou Yang
  • [U-Boot] [PATCH v3 2/2] ARM: dts: at91: add dts file for sama5d4ek   Wenyou Yang
• [U-Boot] [PATCH] tools: Makefile: improve cross_tools target usability   Marek Vasut
  • [U-Boot] [PATCH] tools: Makefile: improve cross_tools target usability   Stefan Müller-Klieser
• [U-Boot] [PATCH v4 1/2] mkimage: Fix missing free() in show_valid_options()   Simon Glass
• [U-Boot] [PATCH v4 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
  • [U-Boot] [PATCH v4 2/2] image: Protect against overflow in unknown_msg()   Simon Glass
• [U-Boot] [PATCH v2 0/2] spl: Convert MMC raw mode sector options to Kconfig   Sam Protsenko
  • [U-Boot] [PATCH v2 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig   Sam Protsenko
  • [U-Boot] [PATCH v2 2/2] spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS   Sam Protsenko
• [U-Boot] [PATCH v2 1/3] arm: am57xx: Define Android partition table   Sam Protsenko
• [U-Boot] [PATCH v2 2/3] arm: am57xx: Enable 8-bit eMMC access   Sam Protsenko
• [U-Boot] [PATCH v2 3/3] arm: dra7xx: Unify Android partition table   Sam Protsenko
• [U-Boot] [PATCH] sunxi: Use the available Kconfig option for AHCI   Jelle van der Waa
• [U-Boot] [PATCH 00/20] rockchip: Add support for Asus Chromebit   Simon Glass
• [U-Boot] [PATCH 01/20] rockchip: video: Correct HDMI data source selection   Simon Glass
  • [U-Boot] [PATCH 01/20] rockchip: video: Correct HDMI data source selection   Andrew F. Davis
• [U-Boot] [PATCH 02/20] rockchip: video: Correct VOP clock selection   Simon Glass
• [U-Boot] [PATCH 03/20] rockchip: Allow jerry to use of-platdata   Simon Glass
• [U-Boot] [PATCH 04/20] dm: core: Handle global_data moving in SPL   Simon Glass
• [U-Boot] [PATCH 05/20] stdio: Correct code style nits   Simon Glass
• [U-Boot] [PATCH 06/20] stdio: Correct numbering logic in stdio_probe_device()   Simon Glass
• [U-Boot] [PATCH 07/20] spi: Add of-platdata support to SPI and SPI flash   Simon Glass
• [U-Boot] [PATCH 08/20] rockchip: spi: Add support for of-platdata   Simon Glass
• [U-Boot] [PATCH 09/20] rockchip: spi: Honour the deactivation delay   Simon Glass
• [U-Boot] [PATCH 10/20] spi: Add error checking for invalid bus widths   Simon Glass
• [U-Boot] [PATCH 11/20] spi: Add a debug() on bind failure   Simon Glass
• [U-Boot] [PATCH 12/20] video: Use cache-alignment in video_sync()   Simon Glass
• [U-Boot] [PATCH 13/20] video: Track whether a display is in use   Simon Glass
• [U-Boot] [PATCH 14/20] rockchip: video: Check for device in use   Simon Glass
• [U-Boot] [PATCH 15/20] rockchip: Move jerry to use of-platdata   Simon Glass
• [U-Boot] [PATCH 16/20] rockchip: Rename jerry files to veyron   Simon Glass
• [U-Boot] [PATCH 17/20] rockchip: Move jerry SDRAM settings into its own .dts file   Simon Glass
• [U-Boot] [PATCH 18/20] rockchip: clk: Support setting ACLK   Simon Glass
• [U-Boot] [PATCH 19/20] rockchip: veyron: Adjust ARM clock after relocation   Simon Glass
• [U-Boot] [PATCH 20/20] rockchip: Add support for veyron-mickey (Chromebit)   Simon Glass
• [U-Boot] [ANN] U-Boot v2016.11-rc3 released   Tom Rini
• [U-Boot] [PATCH] arm: sunxi: do not force USB for arch-sunxi   Yann E. MORIN
• [U-Boot] [PATCH] net: mvgbe: Fix build error with CONFIG_PHYLIB   Chris Packham