November 2013 Archives by thread
Starting: Fri Nov 1 00:11:55 CET 2013
Ending: Sat Nov 30 22:54:58 CET 2013
Messages: 2212
- [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution
Wolfgang Denk
- [U-Boot] [PATCH] arm: trats: add the sd-card power control function.
Jaehoon Chung
- [U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer
Bo Shen
- [U-Boot] [RFC PATCH] usb: dfu: make nand upload working
Bo Shen
- [U-Boot] [PATCH] Makefile: do not create a symbolic link to arch/${ARCH}/include/asm
Masahiro Yamada
- [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution
Heiko Schocher
- [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
Stefano Babic
- [U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks
myan
- [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
Stefano Babic
- [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting
Zhang Haijun
- [U-Boot] [CBP5850-EVB] relocate_code question
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled
Vidya Sagar
- [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled
Vidya Sagar
- [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled
Vidya Sagar
- [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled
Vidya Sagar
- [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)
Mateusz Kulikowski
- [U-Boot] U-Boot Mini Summit slides [was: Minutes from the U-Boot Mini Summit 2013]
Detlev Zundel
- [U-Boot] Location of Titanium board
Fabio Estevam
- [U-Boot] Location of Titanium board
Stefan Roese
- [U-Boot] Location of Titanium board
Peter Korsgaard
- [U-Boot] [PATCH] config: arm: exynos5250: remove duplicate defines
Luka Perkov
- [U-Boot] [PATCH] config: arm: exynos5250: remove duplicate defines
Minkyu Kang
- [U-Boot] [PATCH] common/cmd_bootm.c: fix subcommand processing in OS specific do_bootm_xxx() functions
myan
- [U-Boot] [PATCH v2] common/cmd_bootm.c: fix subcommand processing in OS specific do_bootm_xxx() functions
myan
- [U-Boot] [U-Boot, v2] common/cmd_bootm.c: fix subcommand processing in OS specific do_bootm_xxx() functions
Tom Rini
- [U-Boot] [PATCH v2 0/4] arm, at91: support for the taurus, axm and corvus board
Heiko Schocher
- [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends
Heiko Schocher
- [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends
Andreas Bießmann
- [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends
Wolfgang Denk
- [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends
Heiko Schocher
- [U-Boot] [PATCH v2 2/4] arm, at91: add function for waiting if reset ends
Andreas Bießmann
- [U-Boot] [PATCH v2 3/4] arm, at91: add Siemens board taurus and axm
Heiko Schocher
- [U-Boot] [PATCH v2 3/4] arm, at91: add Siemens board taurus and axm
Andreas Bießmann
- [U-Boot] [PATCH v2 3/4] arm, at91: add Siemens board taurus and axm
Heiko Schocher
- [U-Boot] [PATCH v2 3/4] arm, at91: add Siemens board taurus and axm
Andreas Bießmann
- [U-Boot] [PATCH v2 1/4] at91: add defines for reset type
Heiko Schocher
- [U-Boot] [PATCH v2 1/4] at91: add defines for reset type
Andreas Bießmann
- [U-Boot] [U-Boot,v2,1/4] at91: add defines for reset type
Andreas Bießmann
- [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board
Heiko Schocher
- [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board
Andreas Bießmann
- [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board
Heiko Schocher
- [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board
Andreas Bießmann
- [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board
Heiko Schocher
- [U-Boot] [PATCH v2 4/4] arm, at91: add siemens corvus board
Andreas Bießmann
- [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
Heiko Schocher
- [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
Tom Rini
- [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards
Heiko Schocher
- [U-Boot] [PATCH v2 4/5] usb, g_dnl: make bcdDevice value configurable
Heiko Schocher
- [U-Boot] [PATCH v2 5/5] arm, am335x: update for the siemens boards
Heiko Schocher
- [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards
Vaibhav Bedia
- [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards
Heiko Schocher
- [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards
Vaibhav Bedia
- [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards
Marek Vasut
- [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards
Vaibhav Bedia
- [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards
Heiko Schocher
- [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards
Vaibhav Bedia
- [U-Boot] [PATCH v2 1/5] bootcount: store bootcount var in environment
Heiko Schocher
- [U-Boot] [PATCH v2 2/5] arm, am33x: make RTC32K OSC enable configurable
Heiko Schocher
- [U-Boot] [PATCH v2 3/5] usb, g_dnl: make iSerialNumber board configurable
Heiko Schocher
- [U-Boot] [PATCH v2 3/5] usb, g_dnl: make iSerialNumber board configurable
Lukasz Majewski
- [U-Boot] [PATCH] mx6: titanium: Move BSP code to barco board directory
Stefan Roese
- [U-Boot] [PATCH] mx6: titanium: Move BSP code to barco board directory
Peter Korsgaard
- [U-Boot] [PATCH] mx6: titanium: Move BSP code to barco board directory
Stefano Babic
- [U-Boot] [PATCH] wandboard: README: Include the quad version
Stefano Babic
- [U-Boot] Pull request: u-boot-blackfin
Sonic Zhang
- [U-Boot] [RFC PATCH 2/2] usb: dfu: correct dfu buffer inited value
Lukasz Majewski
- [U-Boot] Minutes from the U-Boot Mini Summit 2013
Detlev Zundel
- [U-Boot] [PATCH v3 0/5] arm, am33xx: update for the am33xx based siemens boards
Heiko Schocher
- [U-Boot] [PATCH v3 2/5] arm, am33x: make RTC32K OSC enable configurable
Heiko Schocher
- [U-Boot] [U-Boot, v3, 2/5] arm, am33x: make RTC32K OSC enable configurable
Tom Rini
- [U-Boot] [PATCH v3 5/5] arm, am335x: update for the siemens boards
Heiko Schocher
- [U-Boot] [U-Boot, v3, 5/5] arm, am335x: update for the siemens boards
Tom Rini
- [U-Boot] [PATCH v3 1/5] bootcount: store bootcount var in environment
Heiko Schocher
- [U-Boot] [U-Boot, v3, 1/5] bootcount: store bootcount var in environment
Tom Rini
- [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable
Heiko Schocher
- [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable
Lukasz Majewski
- [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable
Heiko Schocher
- [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable
Marek Vasut
- [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable
Lukasz Majewski
- [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable
Marek Vasut
- [U-Boot] [PATCH v3 3/5] usb, g_dnl: make iSerialNumber board configurable
Lukasz Majewski
- [U-Boot] [PATCH v3 4/5] usb, g_dnl: make bcdDevice value configurable
Heiko Schocher
- [U-Boot] [U-Boot, v3, 4/5] usb, g_dnl: make bcdDevice value configurable
Tom Rini
- [U-Boot] [PATCH 00/18] Third step towards Kbuild: Convert rest of makefiles
Andreas Bießmann
- [U-Boot] [PATCH 05/18] avr32: convert makefiles to Kbuild style
Andreas Bießmann
- [U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles
Tom Rini
- [U-Boot] [PATCH v4 0/6] Second step towards Kbuild: Descend down like Kbuild
Tom Rini
- [U-Boot] [PATCH 00/18] Third step towards Kbuild: Convert rest of makefiles
Tom Rini
- [U-Boot] [PATCH 1/4] drivers/rtc/davinci.c: Reference DAVINCI_RTC_BASE more directly
Tom Rini
- [U-Boot] [PATCH 2/4] am33xx, davinci: Create and use <asm/davinci_rtc.h>
Tom Rini
- [U-Boot] [PATCH 3/4] bootcount_davinci: Switch to scratch register #2
Tom Rini
- [U-Boot] [PATCH 4/4] TI:am33xx: Add bootcount support to ti_am335x_common.h
Tom Rini
- [U-Boot] ARM: OMAP4: Convert to ti_armv7_common.h
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] nand, davinci: add special UBL ecc position
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] arm, da85x: update for the ipam390 board
Tom Rini
- [U-Boot] [U-Boot, 01/13] tricorder: remove lcdmode from bootargs
Tom Rini
- [U-Boot] [U-Boot, 1/2] cm-t35: move the eeprom code to common place
Tom Rini
- [U-Boot] [U-Boot, 2/2] cm-t35: move the display code to common place
Tom Rini
- [U-Boot] [U-Boot, v3, 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h
Tom Rini
- [U-Boot] [U-Boot, v3, 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h
Tom Rini
- [U-Boot] am335x: Enable CONFIG_OMAP_WATCHDOG support
Tom Rini
- [U-Boot] TI:armv7: Change CONFIG_SYS_SPL_ARGS_ADDR to a higher address
Tom Rini
- [U-Boot] dra7xx_evm: Enabled UART-boot mode and add dra7xx_evm_uart3 build
Tom Rini
- [U-Boot] [U-Boot, 1/3] cm_t35: reduce default bootdelay to 3 seconds
Tom Rini
- [U-Boot] [U-Boot,2/3] cm_t35: turn on GPIO commands
Tom Rini
- [U-Boot] [U-Boot,V2,3/3] cm_t35: update lcd predefines
Tom Rini
- [U-Boot] [U-Boot,V3] ARM: OMAP5: DDR3: Change io settings
Tom Rini
- [U-Boot] TI:omap5: Add rdaddr, use consistent loadaddr values
Tom Rini
- [U-Boot] Pull request: u-boot-ti
Tom Rini
- [U-Boot] Pull request: u-boot-mmc 31102013
Tom Rini
- [U-Boot] [PATCH 1/6] video: remove AT91 legacy API from bus_vcxk
Jens Scharsig
- [U-Boot] [PATCH 1/6] video: remove AT91 legacy API from bus_vcxk
Anatolij Gustschin
- [U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM
Fabio Estevam
- [U-Boot] [PATCH 00/15] MIPS Malta board support
Daniel Schwierzeck
- [U-Boot] [PATCH 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names
Eric Nelson
- [U-Boot] Question about patman
Masahiro Yamada
- [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791
Albert ARIBAUD
- [U-Boot] livetime of boards
Heiko Schocher
- [U-Boot] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [PATCH v10] Add dmmalloc module for DM.
Mateusz Zalega
- [U-Boot] ARM: interrupt_init before relocation, write fails
Rob Herring
- [U-Boot] [PATCH 1/6][v2] powerpc:Add support of SPL non-relocation
Scott Wood
- [U-Boot] [PATCH 2/6][v2] powerpc/SPL:Allow Parsing of LAW table in both SPL & non SPL
Scott Wood
- [U-Boot] [PATCH 3/6][v2] common/env: Point default envirenoment for GD
Scott Wood
- [U-Boot] [PATCH 4/6][v2] Makefile:Add u-boot-with-spl-pbl.bin target for SPL
Scott Wood
- [U-Boot] [PATCH 5/6][v2] SPL:Defines function required to env read for IFC & env_nand
Scott Wood
- [U-Boot] [PATCH 6/6][v2] T1040QDS: Add support of 2 stage NAND boot loader
Scott Wood
- [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere
Wolfgang Denk
- [U-Boot] Pull request - fpga
Michal Simek
- [U-Boot] [PATCH] serial: zynq: Remove unused #defines
Michal Simek
- [U-Boot] Pull request - arm/zynq
Michal Simek
- [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver
matti kaasinen
- [U-Boot] A question about unconfigured pads check in omap24xx_i2c
Nikita Kiryanov
- [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver
Gupta, Pekon
- [U-Boot] [PATCH 0/4] udoo: Improve stability of DDR3 setting
Giuseppe Pagano
- [U-Boot] [PATCH 1/4] udoo: Add Ethernet support.
Giuseppe Pagano
- [U-Boot] [PATCH 2/4] udoo: Add SATA disk support.
Giuseppe Pagano
- [U-Boot] [PATCH 3/4] udoo: Adjust default boot envirnment
Giuseppe Pagano
- [U-Boot] [PATCH 4/4] udoo: fix watchdog setting
Giuseppe Pagano
- [U-Boot] [U-boot] CONFIG_LOGBUFFER and _POST_WORD_ADDR
TigerLiu at viatech.com.cn
- [U-Boot] test
Igor Grinberg
- [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field
Albert ARIBAUD
- [U-Boot] [RESEND PATCH v14 07/10] arm64: core support
York Sun
- [U-Boot] soft vs. hard float
Saridakis, Dean (US SSA)
- [U-Boot] [PATCH v2 2/2] video: bcm2835: respect the pitch value
Anatolij Gustschin
- [U-Boot] [RESEND PATCH v14 07/10] arm64: core support
Scott Wood
- [U-Boot] [U-boot] raise() function question
TigerLiu at viatech.com.cn
- [U-Boot] am335x_evm.h
matti kaasinen
- [U-Boot] [PATCH] RFC: samsung: i2c: Enable new CONFIG_SYS_I2C framework
Piotr Wilczek
- [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file
Przemyslaw Marczak
- [U-Boot] sandbox is broken again
Masahiro Yamada
- [U-Boot] [PATCH 3/6] gzip: correctly bounds-check output buffer
Michal Simek
- [U-Boot] [PATCH] designware_i2c: disable i2c controller during target address setup
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field
Albert ARIBAUD
- [U-Boot] soft vs. hard float
Wolfgang Denk
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH 3/3] ahci: support LBA48 data reads for 2+TB drives
Anatolij Gustschin
- [U-Boot] SPL Dfu update
Michael Trimarchi
- [U-Boot] [U-Boot, v3] cmd/gpt: Support gpt command for all devices
Tom Rini
- [U-Boot] [U-Boot, 1/2] autoboot: add an option to override keyed autoboot
Tom Rini
- [U-Boot] [U-Boot, 1/2] highbank: set AUTOBOOT_KEYED_CTRLC config option
Tom Rini
- [U-Boot] [U-Boot, 1/5] cosmetic: doc: driver-model: Do not number driver lists
Tom Rini
- [U-Boot] [U-Boot, 2/5] cosmetic: UDM-serial: clean up the remainders of dead driver
Tom Rini
- [U-Boot] [U-Boot, 3/5] cosmetic: UDM-net: clean up the remainders of dead driver
Tom Rini
- [U-Boot] config: Define HAVE_BLOCK_DEVICE when CONFIG_CMD_GPT is set
Tom Rini
- [U-Boot] config/sandbox: Add EFI and GPT support
Tom Rini
- [U-Boot] include: delete include/linux/config.h
Tom Rini
- [U-Boot] env: fix the env export varname
Tom Rini
- [U-Boot] [U-Boot, 1/3] cmd_ubifs: normalize 'file not found' errors
Tom Rini
- [U-Boot] [U-Boot, 2/3] cmd_reiser: normalize 'file not found' errors
Tom Rini
- [U-Boot] [U-Boot, 3/3] cmd_zfs: normalize 'file not found' errors
Tom Rini
- [U-Boot] fs:fat: fix set file name function
Tom Rini
- [U-Boot] serial: mxs_auart: Staticize local functions
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] serial: xuartlite: Staticize local functions
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] serial: s5p: Staticize local functions
Tom Rini
- [U-Boot] [U-Boot, v1, 1/1] netconsole loses 2nd character of input
Tom Rini
- [U-Boot] kup: Delete an unused Makefile
Tom Rini
- [U-Boot] [U-Boot,1/2] README.scrapyard: fix broken format
Tom Rini
- [U-Boot] [U-Boot,2/2] EP88x: remove remainders of dead board
Tom Rini
- [U-Boot] sparc: include config.h to start.S
Tom Rini
- [U-Boot] [U-Boot,v2,1/4] MAKEALL: fix awk warning message
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH>
Tom Rini
- [U-Boot] [U-Boot,v2,3/4] MAKEALL: fix boards_by_field function
Tom Rini
- [U-Boot] [U-Boot, v2, 4/4] MAKEALL: rename boards_by_* functions to targets_by_*
Tom Rini
- [U-Boot] cmd_nvedit.c: Add env exists command
Tom Rini
- [U-Boot] boards.cfg: remove trailing whitespace
Tom Rini
- [U-Boot] boards.cfg: remove git leftovers
Tom Rini
- [U-Boot] [U-Boot,v2] Add support for SX151x SPI GPIO Expanders
Tom Rini
- [U-Boot] [U-Boot,v2] nand_util.c: Correct licensing
Tom Rini
- [U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver
Scott Wood
- [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver
Scott Wood
- [U-Boot] [Patch v1 3/6] Driver/DDR: Add Freescale DDR driver for ARM
Scott Wood
- [U-Boot] [RESEND PATCH v14 07/10] arm64: core support
Scott Wood
- [U-Boot] [U-boot] uboot support ext4 format command?
TigerLiu at viatech.com.cn
- [U-Boot] Commit 2108f4c4 causes a warning in 10 ARM boards
Albert ARIBAUD
- [U-Boot] MPC8641D stucks before relocation
Ashish
- [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field
Anatolij Gustschin
- [U-Boot] Non-trivial merge conflicts between u-boot/master and u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] malta: define CONFIG_MEMSIZE_IN_BYTES
Daniel Schwierzeck
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/8] Implement autoconf header file
Marek Vasut
- [U-Boot] patman drops Cc tag
Masahiro Yamada
- [U-Boot] [U-boot] not support parsing Android's boot.img format ?
TigerLiu at viatech.com.cn
- [U-Boot] [RESEND PATCH v14 07/10] arm64: core support
Simon Glass
- [U-Boot] [RFC][PATCH 0/5] SATA support for OMAP5 uevm
Roger Quadros
- [U-Boot] [PATCH RFC] imx: add multi-architecture README
Eric Nelson
- [U-Boot] [PATCH] Separate EBV Socrates board from Altera Cyclone 5 board
Pavel Machek
- [U-Boot] [PATCH v1] patman: add Series-commit-notes tag and section
Masahiro Yamada
- [U-Boot] Microblaze and Sparc boards are broken because of common timer func
Masahiro Yamada
- [U-Boot] How to build tools/updater ?
Masahiro Yamada
- [U-Boot] How to build tools/imls ?
Masahiro Yamada
- [U-Boot] u-boot gerrit server
Vadim Bendebury (вб)
- [U-Boot] Microblaze and Sparc boards are broken because of common timer func
Michal Simek
- [U-Boot] [PATCH V2 1/6] spi: omap3: remove semicolon from #define
Anatolij Gustschin
- [U-Boot] [PATCH V2 2/6] spi: omap3: add support for more word lengths
Anatolij Gustschin
- [U-Boot] [PATCH V2 3/6] spi: define SPI_XFER_ONCE
Anatolij Gustschin
- [U-Boot] [PATCH V2 4/6] lcd: add DataImage SCF0403x LCD panel support
Anatolij Gustschin
- [U-Boot] [PATCH V2 5/6] omap3_dss: define DSS_ONOFF
Anatolij Gustschin
- [U-Boot] [PATCH V2 6/6] cm_t35: use scf0403 driver
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] Question re HYP mode and IRQ/FIQ stack setting
Albert ARIBAUD
- [U-Boot] How to enable FAT fs support and hook up the SD/MMC driver
Djoker
- [U-Boot] [PATCH 03/10 V6] Exynos5420: Add clock initialization for 5420
Minkyu Kang
- [U-Boot] [PATCH 02/10 V6] Exynos5420: Add base addresses for 5420
Minkyu Kang
- [U-Boot] [PATCH 04/10 V6] Exynos5420: Add DDR3 initialization for 5420
Minkyu Kang
- [U-Boot] [PATCH 08/10 V6] Config: Add initial config for SMDK5420
Minkyu Kang
- [U-Boot] [U-Boot, v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
Heiko Schocher
- [U-Boot] [U-Boot, v2] i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework
Heiko Schocher
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Andreas Müller
- [U-Boot] pull-request: u-boot-mpc85xx/master
York Sun
- [U-Boot] [U-Boot, v2, 1/3] am33xx: elm: add support for BCH16_ECC - ELM driver updates
Scott Wood
- [U-Boot] [U-Boot, v2, 2/3] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
Scott Wood
- [U-Boot] [U-Boot, 1/5] MTD: nand: increase the max eccpos size to 448 to support 8k page nand
Scott Wood
- [U-Boot] [U-Boot, 2/5] mtd: atmel_nand: enable PMECC support for 8k bytes page NAND flash
Scott Wood
- [U-Boot] [U-Boot,PATCHv4] Optimized nand_read_buf for kirkwood
Scott Wood
- [U-Boot] [U-Boot, v1, 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
Scott Wood
- [U-Boot] [U-Boot,v5,09/11] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] [U-Boot, v1, 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
Gupta, Pekon
- [U-Boot] NAND BBI swap on iMX53
Luca Ellero
- [U-Boot] [PATCH 2/2] powerpc/t104xrdb: Add T1042RDB_PI board support
Scott Wood
- [U-Boot] fdt performance
Scott Wood
- [U-Boot] [U-Boot, 1/3, v5] mtd: move & update nand_ecclayout structure
Scott Wood
- [U-Boot] [GIT PULL] u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] Some SuperH boards are broken
Masahiro Yamada
- [U-Boot] Many Blackfin boards are broken
Masahiro Yamada
- [U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0
Zhang Haijun
- [U-Boot] arm: U-Boot API - clang support broke ABI
Leif Lindholm
- [U-Boot] [PATCH] arm: omap3: Add uart4 omap3 adddress
Michael Trimarchi
- [U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used
Michael Trimarchi
- [U-Boot] SPI and I2C EEPROM
Aaron Williams
- [U-Boot] [PATCH 0/2] Add usb eth support
Chander Kashyap
- [U-Boot] i2c issues with efikamx and mainline uboot
Konstantinos Margaritis
- [U-Boot] [NAND] fsl_elbc_nand and subpage access
Valentin Longchamp
- [U-Boot] Strange UBI problems
Gary Thomas
- [U-Boot] Help needed: Boot signed RTOS
Christopher Preschern
- [U-Boot] dra7xx: booting from eMMC raw boot partition
Richard Retanubun
- [U-Boot] [RESEND PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
Benoît Thébaudeau
- [U-Boot] [PATCH] spi: Add support SH Quad SPI driver
Nobuhiro Iwamatsu
- [U-Boot] (no subject)
Stefano Babic
- [U-Boot] [PATCH 0/4] Wandboard support for Future Eletronics 7" WVGA LCD extension board
Stefano Babic
- [U-Boot] [PATCH] Net: FEC: Fix huge memory leak
Stefano Babic
- [U-Boot] patchwork does not pick my patch
Masahiro Yamada
- [U-Boot] soft i2c behaviour on address not <ACK>ed
Eibach, Dirk
- [U-Boot] tg3 (bcm570x) port available for uboot ?
John Donnelly
- [U-Boot] [PATCH] mii: dump: parameter choice
Joe Hershberger
- [U-Boot] [PATCH v2] net: Add fixed phy driver
Joe Hershberger
- [U-Boot] Please pull u-boot-x86.git
Simon Glass
- [U-Boot] Which u-boot tree to start for dra7xx_evm
Richard Retanubun
- [U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error
Gupta, Pekon
- [U-Boot] No single character output after update to latest u-boot on pandaboard
Chao Xu
- [U-Boot] mx28: Error: unrecognized/unsupported processor variant (0x41069265).
Mårten Wikman
- [U-Boot] [FYI] Tech-Talk in Opensource India Conference, 2013
Jagan Teki
- [U-Boot] mmc support for mpc8377
Ellis Andrew
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] imx233
Marek Vasut
- [U-Boot] Any experience with BCM5703 - tg3 in u-boot ?
John Donnelly
- [U-Boot] [PATCH 4/4 v2] blackfin: soft-i2c: No need to define blackfin specific soft i2c operations
Heiko Schocher
- [U-Boot] Getting U-Boot running on Toradex Colibri T20 on Iris board
Andrzej Telszewski
- [U-Boot] [PATCH] powerpc/t1040qds: Correct Maintainer name in boards.cfg
York Sun
- [U-Boot] [PATCH v2] mpc85xx: Fix the offset of register address error
York Sun
- [U-Boot] [PATCH] p1010rdb: enable mtdparts for NAND
York Sun
- [U-Boot] pull-request: u-boot-mpc85xx/master
York Sun
- [U-Boot] MPC83xx: asm/arch/sys_proto.h: No such file or directory
Richard Retanubun
- [U-Boot] [PATCH] ARM: align MVBAR on 32 byte boundary
Masahiro Yamada
- [U-Boot] i.MX6 freeze when running Linux FSL 3.10.9-1.0.0-alpha AND U-Boot 2013.10
Otavio Salvador
- [U-Boot] [GIT PULL] u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] [PATCH 3/9 v8] Exynos5420: Add clock initialization for 5420
Minkyu Kang
- [U-Boot] [PATCH 4/9 v8] Exynos5420: Add DDR3 initialization for 5420
Minkyu Kang
- [U-Boot] [PATCH 6/9 v8] Exynos5420: Add base patch for SMDK5420
Minkyu Kang
- [U-Boot] [PATCH 8/9 v8] Config: Add initial config for SMDK5420
Minkyu Kang
- [U-Boot] [PATCH] mmc/dwmmc: remove recursive FIFO threshold setup
Jaehoon Chung
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Thomas Petazzoni
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Enric Balletbo Serra
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Thomas Petazzoni
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Enric Balletbo Serra
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Andreas Bießmann
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Nikita Kiryanov
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Thomas Petazzoni
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Nikita Kiryanov
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Lubomir Popov
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Tom Rini
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Lubomir Popov
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Thomas Petazzoni
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Nikita Kiryanov
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Enric Balletbo Serra
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Nikita Kiryanov
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Nikita Kiryanov
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Tom Rini
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Thomas Petazzoni
- [U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
Michael Trimarchi
- [U-Boot] Compiling U-Boot
Alexey Smishlayev
- [U-Boot] Choosing toolchain (was: 'Re: Compiling U-Boot')
Andreas Bießmann
- [U-Boot] How to write jffs2 image to spi nor flash?
Axel Lin
- [U-Boot] [PATCH] am335x: cpsw: optimize cpsw_recv to increase network performance
Vladimir Koutny
- [U-Boot] [PATCH] am335x: cpsw: optimize cpsw_recv to increase network performance
Mugunthan V N
- [U-Boot] Pull request for u-boot-marvell.git
Holger Brunck
- [U-Boot] ralink RT3052 5X flash memory map
RdrouterUboot Router
- [U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot
Yegor Yefremov
- [U-Boot] Compiling fw_printenv tool
Alexey Smishlayev
- [U-Boot] [PATCH] mmc: dw_mmc: remove the exynos specific code in dw-mmc.c
Jaehoon Chung
- [U-Boot] [PATCH 1/2] spi: bfin_spi: Remove unnecessary test for bus and pins[bus]
Axel Lin
- [U-Boot] [PATCH V2] arm: omap3: Enable clocks for peripherals only if they are used
Michael Trimarchi
Last message date:
Sat Nov 30 22:54:58 CET 2013
Archived on: Mon Dec 23 16:15:33 CET 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).